Agri-Fab 45-01792 User's Manual

Agri-Fab
®
OWNERS
MANUAL
MODEL NO.
45-01792
H.D. LAWN ROLLER
(24" Dia. x 36" Wide)
SAFETY PRECAUTIONS
SPECIFICATIONS:
1. Never attach a garden hose to the fill/drain hole when
filling. Dangerous pressure build up could occur inside
roller.
Roller Drum:
24" Dia. x 36" Wide, Welded Steel
O.A. Width:
Approximately 40"
Bearings:
1" I.D., Replaceable
2. Do not fill roller to maximum weight without checking
capability of vehicle to safely pull and stop.
Tow Hitch:
Std. Pin Type - 1/2" Hole
3. Never use roller up and down hills; always work across
hills and slopes.
Weight w/ Water: Up to 640 Lbs. Filled with Water
(Note: May be filled with sand)
Approx. Sh. Wt.: Approximately 105 Lbs.
4. Use caution when turning, slowing or stopping.
5. Always drain roller to keep from freezing.
Printed in USA
© 2004 Agri-Fab, Inc.
Form No. 49538 (10/04)
ASSEMBLY INSTRUCTIONS
(SEE ILLUSTRATION BELOW)
1. Assemble bearings (Ref. 5) into hitch tubes (Ref. 3) so
that bearing flange is against outside of hitch tube. (You
may need to place a block of wood against bearing and
carefully tap with a hammer.)
5. Assemble hitch brackets (Ref. 4) to hitch tubes (Ref. 3)
using two hex bolts (Ref. 8) and hex lock nuts (Ref. 10).
Do not tighten yet.
6. Tighten bolts and nuts starting with scraper bar (Ref.
2), then ends of hitch tubes (Ref. 3), and finally hitch
brackets (Ref. 4).
2. Place hitch tubes (Ref. 3) onto both ends of roller shaft.
Assemble a flat washer (Ref. 6) onto each end of roller
shaft and secure with two cotter pins (Ref. 12).
7. Install hitch pin (Ref. 13) through hitch brackets (Ref. 4)
and secure with hair cotter pin (Ref. 14).
3. Assemble scraper bar (Ref. 2) to hitch tubes (Ref. 3)
using two hex bolts (Ref. 9) and hex lock nuts (Ref. 10).
Do not tighten yet.
8. Adjust plug (Ref. 11) size by twisting handle. Lock plug
in roller drum by flipping handle down.
4. Assemble ends of hitch tubes (Ref. 3) together using
two hex bolts (Ref. 7) and hex lock nuts (Ref. 10). Do
not tighten yet.
ADJUST SIZE
5
6 12
1
11
9
3
2
12 6 5
10
10
9
13
3
4
10
7
Ref. Part Qty. Description
No. No.
1
2
3
4
5
6
7
----24867
48361
24192
43632
43528
46782
1
1
2
2
2
2
2
Ref.
No.
Roller Drum (Not sold separately)
Scraper Bar
Hitch Tube
Hitch Bracket
Bearing, Plastic
Flat Washer, 1"
Hex Bolt, 5/16-18 x 3"
10
8
8
9
10
11
12
13
14
14
Part Qty. Description
No.
43224
43084
47810
49467
43501
47623
43343
2
2
6
1
2
1
1
Hex Bolt, 5/16-18 x 2-1/4"
Hex Bolt, 5/16-18 x 1-3/4"
Hex Lock Nut, 5/16-18
Plug, Lawn Roller
Cotter Pin, 5/32" x 1-1/2"
Hitch Pin
Hair Cotter Pin 1/8"
REPAIR PARTS
Agri-Fab, Inc.
303 West Raymond
Sullivan, IL. 61951
217-728-8388
www.agri-fab.com
the fastest way to purchase parts www.speedepart.com