advertisement
AD-75v
Parts Manual
081800JCARRITA/tcosta
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: [email protected]
www.amdry.com
ADC Part No. 450430
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
POUR VOTRE SÉCURITÉ
Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.
Important
For your convenience, log the following information:
DATE OF PURCHASE ____________________________ MODEL NO.
AD-75v
RESELLER’S NAME _______________________________________________________________________________________
Serial Number(s) ________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508)
678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.
Table of Contents
Dual Timer “Tap Touch” Controls
Dual Timer Control Panel Assembly
Basket (Tumbler) Bearing Assembly
Basket (Tumbler) Bearing Assembly
2
OPL Control Door Assembly
For Models Mfd. as of July 1, 2002
Illus. No.
Part No.
Qty.
Description
1
2
881053
870011
883616
883617
883618
1
1
1
1
1
8
9
6
7
3
4
5
117604
150317
102603
102601
102503
150321
154011
American Dryer Corporation
2
2
1
1
4
2
1
ADC Logo ONLY (with double adhesive tape)
Logo Double Tape Kit...Not Illustrated
White Control Door
(includes illus. nos. 2 and 3)
Coral Blue Control Door
(includes illus. nos. 2 and 3)
Ivory Control Door
(includes illus. nos. 2 and 3)
Noise Suppression Tape (sold by the foot)
#10-16 x 3/4” TORX + BTN, Type 1
Control Door Rod Support Catch
Control Door Rod Retainer Clip
Control Door Support Rod
#10-32 x 1/2” Phillips Machine Screw
#10-32 Multi-Thread U-Nut
88 Currant Road / Fall River, MA 02720-4781
Coin Control Door Assembly
For Models Mfd. as of July 1, 2002
3
Illus. No.
Part No.
Qty.
Description
1
2
3
4
160015
160104
160016
881053
883621
883619
883620
1
1
1
1
1
1
1
7
8
9
5
6
10
11
883485
117604
152014
150317
102603
102601
102503
Telephone: (508) 678-9000
4
2
1
1
6
1
1
High Security Lock Assembly
Key ONLY
Lock Cam ONLY
ADC Logo with Tape
White Control Door Assembly with Black Trim
(includes illus. nos. 4 through 7)
Ivory Control Door with Black Trim
(includes illus. nos. 4 through 7)
Coral Blue Control Door with Black Trim
(includes illus. nos. 4 through 7)
Black Trim Strip with Lock Hole
Noise Suppression Tape (sold by the foot)
1/4-20 Free Spin Wash Nut
#10-16 x 3/4” TORX + BTN, Type 1
Control Door Rod Support Catch
Control Door Rod Retainer Clip
Control Door Support Rod
Fax: (508) 678-9447
4
Control Door Assembly
For Models Mfd. prior to July 1, 2002
Illus. No.
Part No.
Qty.
Description
1
2
3
4
160015
160017
160104
160052
881053
870011
882751
882752
882749
882761
1
1
1
1
1
1
1
1
1
1
5
6
7
8
9
10
117603
150309
102603
150309
102502
102601
4
2
1
2
1
1
American Dryer Corporation
High Security MK-100 Lock Assembly with Key
(for coin models Only)
Special Dummy Lock ONLY
(for non-coin models Only)
MK-100 Key ONLY
Cam ONLY
ADC Logo with Tape
Double Sided Tape Kit...Not Illustrated
White High Security Control Door Assembly Less Lock
(includes illus. nos. 4 and 5)
Almond “B” High Security Control Door Assembly Less Lock
(includes illus. nos. 4 and 5)
Coral Blue High Security Control Door Assembly Less Lock
(includes illus. nos. 4 and 5)
Bisque High Security Control Door Assembly Less Lock
(includes illus. nos. 4 and 5)
Noise Suppressor Tape (sold by the foot)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Control Door Rod Support Catch
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Control Door Support Rod
Control Door Rod Retainer Clip
88 Currant Road / Fall River, MA 02720-4781
Phase 5 OPL Microprocessor Control Panel Assembly 5
Illus. No.
Part No.
Qty.
Description
1
2
3
4
5
6
7
112535
112276
112277
801255
801256
801206
801207
137222
137231
824998
153010
150005
150309
136048
1
1
1
1
1
1
1
1
1
1
2
2
1
1
OPL English Keyboard Label Assembly
OPL Stick-On Labels (English Only)...Not Illustrated
3-Language OPL Stick-On Labels...Not Illustrated
(English, Spanish, and Hebrew)
Phase 5 Microprocessor Control Panel ONLY
Phase 5 Microprocessor Control Panel ONLY with Battery Bracket
Phase 5 OPL Non-Reversing Microprocessor Control Panel Assembly
Complete
(includes illus. nos. 1 through 5)
Phase 5 OPL Reversing Microprocessor Control Panel Assembly
Complete
(includes illus. nos. 1 through 5)
Phase 5 OPL Non-Reversing Microprocessor Controller (computer) ONLY
Phase 5 OPL Reversing Microprocessor Controller (computer) ONLY
Phase 5 Battery Clip
#6 Star Washer
#6-32 x 1/4” Phillips Round Head Machine Screw
#10-16 x 1/2” Hex Head TEK Crimptite Screw
1/8-Amp (Slo-Blo) Fuse
IMPORTANT: Check label on computer chip to verify correct part number for controller (computer).
Telephone: (508) 678-9000 Fax: (508) 678-9447
6
Phase 5 Coin Microprocessor Control Panel Assembly
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Phase 5 Coin Microprocessor Control Panel Assembly 7
Illus. No.
Part No.
Qty.
Description
1
2
3
4
5
6
7
8
9
10
11
112526
883537
883538
883582
883581
883539
883540
883580
883579
150309
137213
824998
153010
150005
--------
--------
137023
137021
880772
122800
136048
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
3
1
1
1
Coin Keyboard Label Assembly
Phase 5 Coin Control Panel Assembly
(for models mfd. as of June 25, 2002)
(includes illus. nos. 1, 2, and 4 through 6)
Phase 5 Coin Control Panel Assembly with Battery Option
(for models mfd. as of June 25, 2002)
(includes illus. nos. 1, 2, and 4 through 6)
Phase 5 Coin Control Panel Assembly with Battery Option
(for models mfd. prior to June 25, 2002)
(includes illus. nos. 1, 2, and 4 through 6)
Phase 5 Coin Control Panel Assembly
(for models mfd. prior to June 25, 2002)
(includes illus. nos. 1, 2, and 4 through 6)
Coin Control Panel ONLY
(for models mfd. as of June 25, 2002)
Coin Control Panel ONLY with Battery Bracket
(for models mfd. as of June 25, 2002)
Coin Control Panel ONLY
(for models mfd. prior to June 25, 2002)
Coin Control Panel ONLY with Battery Bracket
(for models mfd. prior to June 25, 2002)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Phase 5 Coin Controller ONLY
Phase 5 Battery Clip
#6 Star Washer
#6-32 x 1/4” Phillips Round Head Machine Screw
Microprocessor Coin Acceptor
(refer to the Microprocessor Coin Acceptors Listing on page 45)
Optic Switch ONLY
(refer to the Microprocessor Coin Acceptors Listing on page 45)
Optic Switch Connector ONLY
Microprocessor Socket ONLY
Single Coin Optical Switch Harness
Microprocessor (female) Pin Extraction Tool...Not Illustrated
1/8-Amp (Slo-Blo) Fuse
IMPORTANT: Check label on computer chip to verify correct part number of controller (computer).
Telephone: (508) 678-9000 Fax: (508) 678-9447
8
Coin and OPL Control Box Assembly
Illus. No.
Part No.
Qty.
Description
1
2
3
4
5
6
7
8
9
10
11
132002
150300
150301
131931
137035
323583
150300
122641
122706
122801
150301
132198
1
*
1
2
1
2
1
2
2
1
1
1
* As required.
American Dryer Corporation
Transformer
(for mechanical steam damper models - 208 VAC and higher Only)
#10-16 x 1/2” Hex Washer TEK Screw
#8-18 x 7/16” Phillips Pan Head TEK Screw
Steam Valve Relay - 24 VAC
(for mechanical steam damper models Only)
Capacitor
(for mechanical steam damper models Only)
Capacitor Bracket
(for mechanical steam damper models Only)
#10-16 x 1/2” Hex Washer TEK Screw
15-Pin Microprocessor Controller (computer) Connector
Socket Terminal ONLY
Pin/Socket Extraction Tool...Not Illustrated
#8-18 x 7/16” Phillips Pan Head TEK Screw
Reversing Timer 24V
(for reversing dual timer models mfd. as of November 1, 2000 Only)
88 Currant Road / Fall River, MA 02720-4781
Dual Timer “Tap Touch” Controls
For Models Mfd. as of November 1, 2000
9
Illus. No.
Part No.
Qty.
Description
3
4
1
2
5
6
7
8
824298
824299
824175
122301
131932
120730
151000
882903
9
10
11
12
13
14
15
850392
153010
152000
150207
150110
112563
124104
124105
Telephone: (508) 678-9000
-
2
3
2
4
1
1
1
1
1
1
1
3
1
6
1
15 Minute Timer - 24 VAC
60 Minute Timer - 24 VAC
Red Pilot Light - 24 VAC
“Tap Touch” Switch
Relay SPST 24v
30-Position Terminal Block
#6-32 Pal Nut
Dual Timer Panel Complete
(includes illus. nos. 1 through 15)
Dual Timer Panel ONLY
#6 Star Washer
#6-32 Hex Nut
#10-24 x 1/2” Phillips Pan Head Machine Screw
#8-32 x 1/4” Phillips Round Head Machine Screw
Dual Timer Panel Overlay
Pure Touch Knob with Red Pointer
Pure Touch Knob with Blue Pointer
Fax: (508) 678-9447
10
Dual Timer Control Panel Assembly
For Models Mfd. prior to November 1, 2000
Illus. No.
Part No.
Qty.
Description
1
2
3
123005
122400
882596
882540
882600
1
1
1
1
1
8
9
10
11
12
6
7
4
5
13
14
15
16
17
882573
850456
131917
150207
154001
152000
153010
120730
150110
131932
151000
112050
124103
124025
124030
132198
American Dryer Corporation
2
1
4
2
2
1
2
1
1
1
2
1
2
1
1
1
Red Indicator Light - 24 VAC
Rocker Heat Selector Switch
Non-Reversing Dual Timer Control Panel Assembly Complete - 24 VAC
(includes illus. nos. 1 through 16)
Non-Reversing Panel Wiring Harness...Not Illustrated
Reversing Dual Timer Control Panel Assembly Complete - 24 VAC
(includes illus. nos. 1 through 17)
Reversing Panel Wiring Harness...Not Illustrated
Dual Timer Control Panel ONLY
Push-To-Start Relay - 24 VAC
#10-24 x 1/2” Round Head Machine Screw
#10-24 Speed Nut
#6-32 Hex Nut
#6 Star Washer
30-Position Terminal Block
#8-32 x 1/4” Phillips Round Head Machine Screw
Dual Timer Relay - 24 VAC
#6-32 Pal Nut
Dual Timer Label ONLY
Arrow Timer Knob
60 Minute Timer - 24 VAC
15 Minute Timer - 24 VAC
Reversing Timer - 24 VAC (reversing models Only)
88 Currant Road / Fall River, MA 02720-4781
Coin Vault Assembly 11
Illus. No.
Part No.
Qty.
Description
1
2
3
4
5
6
7
8
9
802112
802117
160028
875061
160105*
802020
802019
125915
802018
152014
102502
102601
102603
1
1
1
1
1
1
1
4
1
1
1
1
1
Microprocessor Coin Vault Assembly Complete
(includes illus. nos. 1 through 6)
Microprocessor Coin Vault ONLY
Cam ONLY for 1/4 Turn Lock
1/4 Turn Lock with Key and Cam
1/4 Turn Mer-Pel Key ONLY
1/4 Turn Coin Box Assembly
(includes illus. nos. 2 through 5)
1/4 Turn Coin Box ONLY without Faceplate
High Security (Greenwald) Coin Box ONLY with Key
1/4 Turn Coin Box Faceplate ONLY
1/4-20 Free Spin Wash Nut
Control Door Support Rod
Control Door Rod Retainer Clip
Control Door Rod Support Catch
* Specify key number when ordering.
Telephone: (508) 678-9000 Fax: (508) 678-9447
12
Front Panel Assembly
For Models Mfd. with Steel Loading Doors
Illus. No.
Part No.
Qty.
Description
1
2
3
4
5
6
882905
882901
882902
150313
150318
--------
--------
881987
154215
1
1
1
White Front Panel Assembly
(includes illus. nos. 1, 5, and 6)
Coral Blue Front Panel Assembly
(includes illus. nos. 1, 5, and 6)
Ivory Front Panel Assembly 1
1
(includes illus. nos. 1, 5, and 6)
11 #10-16 x 1/2” TORX + BTN, Type 1
1 25 IP TORX + Bit 1/4 Hex (for removal of TORX head screw)
Main Door Hinge
(refer to Main Door “Steel” Assembly on page 13)
1 Lint Drawer Switch
(refer to Lint Drawer/Lint Drawer Switch Assembly on page 19)
Friction Door Latch
2
(includes illus. nos. 5 and 6)
5/32” Pop Rivet
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Main Door “Steel” Assembly
For Models Mfd. with Steel Loading Doors
13
Illus. No.
Part No.
Qty.
Description
1
2
3
7
8
9
10
11
12
13
14
15
4
5
6
16
881150
102354
170731
881152
150445
153031
881151
150445
150683
152014
151010
150120
150683
152014
881210
102211
102218
170731
151013
1
2
3
3
1
1
3
3
1
1
1
1
1
2
1
1
1
1
4
Telephone: (508) 678-9000
Black Main Door Assembly Complete
(includes illus. nos. 1, 2, and 8 through 15)
Door Gasket
Black Glass Adhesive (10.3 oz. cartridge)
Black Top Hinge Block Assembly
(includes illus. nos. 3 and 4)
1/4-20 x 3/4” Black Cap Head Setscrew
1/4” Nylon Washer
Black Bottom Hinge Block Assembly
(includes illus. nos. 5 through 7)
1/4-20 x 3/4” Black Cap Head Setscrew
1/4-20 x 5/8” Black Carriage Bolt
1/4-20 Free Spin Wash Nut
#10-32 Black Hex Acorn Nut
Door Latch Screw
1/4-20 x 5/8” Black Carriage Bolt
1/4-20 Free Spin Wash Nut
Black Main Door Handle ONLY
20-7/16” Door Glass
(for models mfd. prior to February 8, 2001 and as of March 13, 2001)
20-7/16” Door Glass with Notch and Four (4) Holes
(for models mfd. between February 8, 2001 and March 13, 2001)
Black Glass Adhesive (10.3 oz. cartridge)
#10-32 Black Nylon Acorn Nut
(for models mfd. between February 8, 2001 and March 13, 2001)
Fax: (508) 678-9447
14
Main Door Switch Assembly
For Models Mfd. with Steel Loading Doors
Illus. No.
Part No.
Qty.
Description
3
4
1
2
5
6
150006
152013
153010
137005
122636
881211
881153
2
1
2
2
2
1
1
7 150301 2
American Dryer Corporation
#6-32 x 7/8” Phillips Pan Head Machine Screw
#6-32 Hex Nut
#6 Star Washer
Door Switch
Flag Terminal
Black Main Door Switch Housing ONLY
Black Main Door Switch Housing Complete
(includes illus. nos. 1 through 4 and 6)
#8-18 x 7/16” Phillips Pan Head TEK Screw
88 Currant Road / Fall River, MA 02720-4781
Front Panel Assembly
For Models Mfd. with Plastic Loading Doors
15
Illus. No.
Part No.
Qty.
Description
1
2
3
4
5
6
882753
882754
882755
882756
150309
121405
--------
170330
154215
1
1
1
2
White Front Panel Assembly
(includes illus. nos. 1, 3, 5, and 6)
Almond “B” Front Panel Assembly
(includes illus. nos. 1, 3, 5, and 6)
1 Coral Blue Front Panel Assembly
(includes illus. nos. 1, 3, 5, and 6)
Bisque Front Panel Assembly 1
(includes illus. nos. 1, 3, 5, and 6)
11 #10-16 x 1/2” Hex Head TEK Crimptite Screw
1
1
Rubber Grommet
Lint Drawer Switch
(refer to Lint Drawer/Lint Drawer Switch Assembly on page 19)
Friction Door Latch
5/32” Pop Rivet
Telephone: (508) 678-9000 Fax: (508) 678-9447
16
Main Door Assembly
For Models Mfd. with Plastic Loading Doors
Illus. No.
Part No.
Qty.
Description
1
2
3
4
5
6
7
8
9
881422
800448
150410
152014
102349
102212
170730
150448
170319
150431
1
1
4
4
1
1
1
4
4
1
American Dryer Corporation
Black Plastic Main Door Assembly Complete with Mechanical Fasteners
(includes illus. nos. 1 and 5 through 9)
12-1/2” Stainless Steel Main Door Hinge Assembly
#10-24 x 3/8” Phillips Pan Head Taptite Screw
1/4-20 Free Spin Wash Nut
Main Door Gasket
20-7/16” Door Glass with Four (4) Holes
Main Door Glass Adhesive (10.3 oz. cartridge)...Not Illustrated
1/2” Stainless Steel Flat Head Allen Screw
Door Glass (nylon) Spacer
Main Door Latch Screw
(#10 x 7/16” dome hex head)
88 Currant Road / Fall River, MA 02720-4781
Main Door Switch Housing
For Models Mfd. with Plastic Loading Doors
17
Illus. No.
Part No.
Qty.
Description
4
5
6
1
2
3
152013
153008
137005
121028
154281
800448
7
8
9
10
153565
313218
150201
121405
Telephone: (508) 678-9000
2
1
2
1
2
2
1
2
2
1
#6-32 Hex Nut
#6 Lock Washer
Single-Pole Door Switch
Insulated Female Terminal
3/8” Standard Nylon Spacer
12-1/2” Stainless Steel Main Door Hinge Assembly
(includes illus. nos. 6 and 7)
#6-32 x 1” Self-Clinching Stud
Main Door Switch Housing
#10-32 x 1/4” Phillips Pan Head Machine Screw
Rubber Grommet
Fax: (508) 678-9447
18
Basket (Tumbler)/Support Assemblies
Illus. No.
Part No.
Qty.
Description
1*
2
3
8
9
10
11
12
4
5
6
7
800708
800857
800816
800873
150313
150429
301308
301408
150500
100905
153004
800613
100724
100713
152027
153005
153004
116000
401010
115986
4
4
1
1
4
1
1
1
4
4
4
4
1
1
1
1
Basket (tumbler) ONLY without Felt Collar
Stainless Steel Basket (tumbler) ONLY without Felt Collar
Basket (tumbler) and Support Assembly Complete
1
(includes illus. nos. 1 through 10)
40 #10-16 x 1/2” TORX Head Crimptite Screw
1
(includes illus. nos. 1 through 10)
Stainless Steel Basket (tumbler) and Support Assembly Complete
TORX Hand Driver...Not Illustrated
(for removal of TORX head screw)
1
Basket (tumbler) Rib ONLY
Stainless Steel Basket (tumbler) Rib ONLY
5/16-18 x 3/4” Socket Button Head Screw
(for models mfd. prior to April 26, 2002)
3/8-16 x 37” Tie Rod
3/8” Flat Washer
Basket (tumbler) Support ONLY
1/4” x 1/4” x 1-1/4” Basket (tumbler) Support Key
(for models mfd. as of July 1, 2001)
1/4” x 1/4” x 7/8” Basket (tumbler) Support Key
(for models mfd. prior to July 1, 2001)
3/8-16 Nylon Insert Hex Nut
3/8” Lock Washer
3/8” Flat Washer
Felt Collar ONLY
#847 Adhesive for Felt Collar...Not Illustrated
1/4” x 2” Felt Basket (tumbler) Pad
(for models mfd. as of May 20, 2002)
* Felt collar is not included and must be ordered separately.
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Lint Drawer/Lint Drawer Switch Assembly 19
Illus. No.
Part No.
Qty.
Description
1
4
5
6
2
3
7
882757
882758
882759
882760
117605
108222
122116
122605
122701
122801
818087
1
1
1
1
8
9
10
304136
150301
122700
122604
Telephone: (508) 678-9000
4
2
1
2
1
2
4
5
1
1
1
White Lint Drawer Assembly
(includes illus. nos. 1 and 2)
Almond “B” Lint Drawer Assembly
(includes illus. nos. 1 and 2)
Coral Blue Lint Drawer Assembly
(includes illus. nos. 1 and 2)
Bisque Lint Drawer Assembly
(includes illus. nos. 1 and 2)
Neoprene Sponge Tape (sold by the foot)
Lint Screen Assembly
Lint Drawer Switch
4-Pin Connector (female)
Socket Terminal ONLY
Pin/Socket Extraction Tool...Not Illustrated
Lint Drawer Switch Box Assembly
(includes illus. nos. 4 and 7)
Lint Drawer Switch Box Cover
#8-18 x 7/16” Phillips Pan Head TEK Screw
Pin Terminal ONLY
4-Pin Connector (male)
Fax: (508) 678-9447
20
Idler Bearing Assembly
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Idler Bearing Assembly
Illus. No.
Part No.
Qty.
Description
1
2
3
4
5
6
7
8
9
10
11
12
100108
101140
100194
100109
154301
100705
882576
150617
153005
153004
801009
152004
150509
1
1
1
1
2
1
1
2
2
2
1
1
1
5L-680 V-Belt (basket [tumbler] to idler)
14” x 3” Compound Pulley
4L-720 V-Belt (idler to motor) for Non-Reversing Models ONLY
4L-650 V-Belt (idler to motor) for Reversing Models ONLY
5/16-18 x 1” Allen Setscrew
3/16” x 3/16” x 1-3/8” Key
Idler Bearing Assembly Complete
(includes illus. nos. 5 through 12)
3/8-16 x 1” Hex Head Machine Bolt
3/8” Lock Washer
3/8” Flat Washer
Idler Square Washer
5/16-18 Hex Nut
5/16-18 x 3” Hex Head Machine Bolt
21
Telephone: (508) 678-9000 Fax: (508) 678-9447
Basket (Tumbler) Bearing Assembly
For Models Mfd. with Griplock Type Bearings
Illus. No.
Part No.
Qty.
Description
9
10
11
12
13
7
8
5
6
17
18
19
14
15
16
3
4
1
2
20
21
22
23
24
25
883735
153025
152050
883734
883742
153004
150501
102120
824807
100735
101100
101118
101110
100108
100270
152004
150610
100272
800980
800982
883737
150601
153004
153004
153005
152005
152004
150621
153002
1
4
4
1
1
1
1
1
2
2
2
2
2
2
2
4
4
4
1
1
1
1
1
1
1
1
2
2
1
1-3/4” Flange Bearing (griplock)
9/16” Lock Washer
9/16-12 Hex Nut
Pillow Block Bearing Assembly Complete
(includes illus. nos. 4 through 15)
Pillow Block Bearing Assembly Complete with Rotational Sensor Magnet
(includes illus. nos. 4 through 17)
Pillow Block Bearing Platform ONLY (for nonrotational sensor models)
Pillow Block Bearing Platform ONLY (for rotational sensor models)
1-3/8” Pillow Block Bearing
3/8-16 x 2” Hex Bolt
3/8” Flat Washer
3/8” Flat Washer
3/8” Lock Washer
3/8-16 Hex Nut
5/16-18 Hex Nut
5/16-18 x 1-1/2” Tap Bolt
5/16” Lock Washer
3/8” Flat Washer
5/16-18 x 3/4” Tap Bolt
Sintered 8 Magnet (for reversing models Only)
Rotational Sensor Assembly
Shaft Key (for reversing models Only)
18” Pulley (for non-reversing models Only)
18-3/4” Pulley (for reversing models Only)
1” Taper Lock Bushing (for reversing models Only)
5L-680 V-Belt (basket [tumbler] to idler)
1-3/8” Bearing Replacement Collar (griplock)
5/16-18 Hex Nut
5/16-18 x 1-1/2” Allen Setscrew
1-3/4” Bearing Replacement Collar (griplock)
23
Telephone: (508) 678-9000 Fax: (508) 678-9447
Basket (Tumbler) Bearing Assembly
For Models Mfd. with Setscrew Type Bearings
Illus. No.
Part No.
Qty.
Description
3
4
1
2
5
10
11
12
13
14
8
9
6
7
15
16
17
18
19
20
21
22
23
24
880220
153025
152050
882544
882545
882542
882543
880202
880779
150601
153004
153004
153005
152005
154321
152004
150621
153002
153004
150501
102120
824807
100724
100735
101100
101118
101110
100108
150610
152004
1
4
4
1
1
1
1
1
1
2
2
2
2
2
2
2
2
4
4
4
1
1
1
1
1
1
1
1
2
2
1-3/4” Flange Bearing
9/16” Lock Washer
9/16-12 Hex Nut
Pillow Block Bearing Assembly Complete
(includes illus. nos. 4 through 16)
Pillow Block Bearing Assembly Complete with Rotational Sensor and
Magnet
(includes illus. nos. 4 through 18)
Pillow Block Bearing Platform ONLY (for use with nonrotational sensor)
Pillow Block Bearing Platform ONLY (for use with rotational sensor)
(includes illus. no. 17)
1-3/8” Pillow Block Bearing
1-3/8” Pillow Block Bearing (for rotational sensor type models Only)
(includes illus. nos. 5 and 17)
3/8-16 x 2” Hex Bolt
3/8” Flat Washer
3/8” Flat Washer
3/8” Lock Washer
3/8-16 Hex Nut
5/16-24 x 3/8” Allen Setscrew
5/16-18 Hex Nut
5/16-18 x 1-1/2” Tap Bolt
5/16” Lock Washer
3/8” Flat Washer
5/16-18 x 3/4” Tap Bolt
Sintered 8 Magnet (for reversing models Only)
Rotational Sensor Assembly
Shaft Key (for non-reversing models Only)
Shaft Key (for reversing models Only)
18” Pulley (for non-reversing models Only)
18-3/4” Pulley (for reversing models Only)
1” Taper Lock Bushing (for reversing models Only)
5L-680 V-Belt (basket [tumbler] to idler)
5/16-18 x 1-1/2” Allen Setscrew
5/16-18 Hex Nut
25
Telephone: (508) 678-9000 Fax: (508) 678-9447
26
Non-Reversing Motor Mount Assembly
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Non-Reversing Motor Mount Assembly 27
Illus. No.
Part No.
Qty.
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
100194
100701
101133
101130
150501
153002
153001
100073*
181050
122701
122801
137030
152004
153002
153001
117604
154000
803561
803945*
1
1
1
1
4
4
4
1
1
8
1
1
4
4
4
4
4
1
1
16
17
18
19
20
21
22
801824
803955*
803958*
153051
882670
100714
153050
152006
120200
100075*
1
1
1
1
1
1
2
2
1
1
4L-720 V-Belt (idler to motor)
3/16” x 3/16” x 1” Key
5/8” x 2-1/4” Motor Pulley (60 Hz Only)
5/8” x 2-1/2” Motor Pulley (50 Hz Only)
5/16-18 x 3/4” Tap Bolt
5/16” Lock Washer
5/16” Flat Washer
1 HP 120/208/230v 1ø 60 Hz Motor with Plug (56Z frame)
1 HP 200v-240v 1ø Motor (50 Hz Only)
Socket Terminal ONLY
Pin/Socket Extraction Tool...Not Illustrated
8-Pin Housing Connector
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
Noise Suppression Tape (sold by the foot)
5/16-18 Tinnerman Nut
Non-Reversing Motor Mount ONLY (56Z frame)
1 HP 120/230v 1ø 60 Hz Motor Mount Assembly with Plug Complete
(includes illus. nos. 2 through 7 and 13 through 20)
1 HP 200v-240v 1ø 50 Hz Non-Reversing Motor Mount Assembly
Complete
(includes illus. nos. 2 through 7 and 13 through 20)
1 HP 208v-230v/460v 3ø 60 Hz Non-Reversing Motor Mount Assembly
Complete
(includes illus. nos. 2 through 6 and 13 through 22)
1 HP 208v-230v/460v 3ø 50 Hz Non-Reversing Motor Mount Assembly
Complete
(includes illus. nos. 2 through 6 and 13 through 22)
3/4” Flat Washer
16” Impellor with 3/4” Bore
3/16” x 3/16” x 1-7/8” Key
1/2” Flat Washer
1/2-20 Left Hand Jam Nut
3/8” x 90° Connector
1 HP 208-230v 3ø 50/60 Hz Motor
* Specify voltage when ordering.
Telephone: (508) 678-9000 Fax: (508) 678-9447
28
Reversing Motor Mount Assembly
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Reversing Motor Mount Assembly
9
10
11
12
13
4
5
6
7
8
14
15
16
17
18
Illus. No.
Part No.
Qty.
Description
1
2
3
19
20
21
22
23
24
100109
100701
101133
101130
120200
181003
150501
153002
153001
1
1
1
1
1
1
4
4
4
4L-650 V-Belt (to idler assembly)
3/16” x 3/16” x 1” Key
5/8” x 2-1/4” Motor Pulley (60 Hz Only)
5/8” x 2-1/2” Motor Pulley (50 Hz Only)
3/8” x 90° Connector
1/2 HP 208v-416v 50/60 Hz 460v 60 Hz 3ø Motor (56Z frame)
5/16-18 x 3/4” Tap Bolt
5/16” Lock Washer
5/16” Flat Washer
100075*
120200
150501
153002
153001
1
1
4
4
4
1 HP 208v-230v/460v 3ø 50/60 Hz Motor with 3/4” Shaft (56Z frame)
3/8” x 90° Connector
5/16-18 x 3/4” Tap Bolt
5/16” Lock Washer
5/16” Flat Washer
154000
152004
153002
8
6
6
153001
803566
804029** 1
6
1
804030**
117604
153051
100714
882670
153050
152006
1
5/16-18 Tinnerman Nut
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
Reversing Motor Mount ONLY (56Z frame)
60 Hz Reversing Motor Mount Assembly Complete
(includes illus. nos. 2 through 14 and 18 through 24)
50 Hz Reversing Motor Mount Assembly Complete
(includes illus. nos. 2 through 14 and 18 through 24)
Noise Suppression Tape (sold by the foot) 5
1
1
1
3/4” Flat Washer
3/16” x 3/16” x 1-7/8” Key
16” Impellor with 3/4” Bore
*** 1/2” Flat Washer
2 1/2-20 Left Hand Jam Nut
* Check part number on motor data label to verify correct motor.
** Specify voltage when ordering.
*** As required.
29
Telephone: (508) 678-9000 Fax: (508) 678-9447
30
Sensor Bracket Assemblies
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Sensor Bracket Assemblies 31
Illus. No.
Part No.
Qty.
Description
1 880251 1
2
3
4
5
6
7
8
9
10
17
18
19
20
21
11
12
13
14
15
16
22
23
24
25
26
27
28
130103
153010
152000
121028
122701
122801
122605
154007
150005
824051
322062
122604
122700
150301
150005
130111
130100
130103
130101
153010
152000
882535
121028
122701
122605
882534
882536
322062
122604
122700
122801
150301
1
2
2
2
4
1
1
2
2
1
1
1
4
2
5
1
1
1
1
5
5
1
4
4
1
1
1
1
4
1
2
1/4” Temperature Sensor Probe Assembly
(includes illus. nos. 1 and 5 through 8)
225° Large Automatic Reset Thermostat
#6 Star Washer
#6-32 Hex Nut
Insulated Female Terminal
Socket Terminal ONLY
Pin/Socket Extraction Tool...Not Illustrated
4-Pin Connector (female)
1/4” Tinnerman Push On Fastener
#6-32 x 1/4” Phillips Round Head Machine Screw
Microprocessor Sensor Bracket Assembly Complete
(includes illus. nos. 1 through 10)
Universal Sensor Bracket ONLY
4-Pin Connector (male)
Pin Terminal ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
#6-32 x 1/4” Phillips Round Head Machine Screw
130° Large Thermostat
150° Large Thermostat
225° Large Automatic Reset Thermostat
180° Large Thermostat
#6 Star Washer
#6-32 Hex Nut
Sensor Jumper ONLY
Insulated Female Terminal
Socket Terminal ONLY
4-Pin Connector (female)
Sensor Bracket Harness Assembly
(includes illus. nos. 22 through 24)
Noncomputer Sensor Bracket Assembly Complete - Includes Thermostats
(includes illus. nos. 14 through 25)
Universal Sensor Bracket ONLY
4-Pin Connector (male)
Pin Terminal ONLY
Pin/Socket Extraction Tool...Not Illustrated
#8-18 x 7/16” Phillips Pan Head TEK Screw
Telephone: (508) 678-9000 Fax: (508) 678-9447
32
Direct Spark Ignition (DSI) Burner Assembly
Illus. No.
Part No.
Qty.
Description
1*
4
5
2
3
882773
882775
814832
141105
141210
318714
128927
880960
1
1
1
1
1
1
4
1
6*
882575
140820
140805
1
4
4
American Dryer Corporation
Natural Gas Burner Assembly Complete
(for models mfd. with natural gas Only)
(includes illus. nos. 1 through 31)
Liquid Propane (L.P.) Gas Burner Assembly Complete
(for models mfd. with liquid propane [L.P.] gas Only)
(includes illus. nos. 1 through 31)
Burner Box ONLY
Large Burner Tube
3/4” Direct Spark Ignition (DSI) Manifold (4-port)
Bracket for Horizontal Facing Gas Valve
1/2” 24 VAC Redundant (natural gas) Gas Valve
1/2” 24 VAC Direct Spark Ignition (DSI) Liquid Propane (L.P.)
Gas Valve Assembly
AD-75v Liquid Propane (L.P.) Conversion Kit
#29 Burner Orifice (natural gas) ONLY
#47 Burner Orifice (liquid propane [L.P.] gas Only)
88 Currant Road / Fall River, MA 02720-4781
Direct Spark Ignition (DSI) Burner Assembly (continued)
Illus. No.
Part No.
Qty.
Description
13
14
15
16
17
18
19
7
8
9
10
11
12
23
24
25
26
20
21
22
27
28
29
30
31
**
150103
151001
150300
809309
150309
152013
128935
817027
142707
142506
142600
142809
319704
151000
150001
130201
318700
143000
154004
802799
122200
150303
105500
319202
154002
882772
1
2
1
1
1
1
4
1
1
1
1
1
1
5
1
9
2
4
4
1
1
1
1
2
2
1
#8-32 x 3/4” Phillips Round Head Machine Screw
#8-32 Pal Nut
#10-16 x 1/2” Hex Washer TEK Screw
Ignitor Probe Assembly with 19” Leads
#10-16 x 1/2” Hex Head TEK Crimptite Screw
#6-32 Hex Nut
Direct Spark Ignition (DSI) Module with Three (3) Tries
Johnson Controls Direct Spark Ignition (DSI) Module Mounting Bracket
1/2” x 1-1/2” Long Black Nipple
1/2” Street Elbow
1/2” Black Union
1/2” x 29-1/8” Nipple
Hi-Limit Mounting Bracket
#6-32 Pal Nut
#6-32 x 1/2” Phillips Round Head Machine Screw
330º Hi-Limit Manual Reset
Pipe Bracket (bent)
3/4” to 1/2” Reducing Coupling
Twin Speed Nut
Sail Switch Box Cover and Bracket ONLY
(refer to Sail Switch Assembly on page 36)
Sail Switch ONLY
#4 x 3/4” Pan Head “A” Machine Screw
Sail Switch Actuator Rod
Sail Switch Damper (flat)
1/8” Push On Fastener
Steam to Gas Interface Plate...Not Illustrated
* Consult factory for elevations over 2,000 feet.
** Needed when converting from steam to gas heat.
33
Telephone: (508) 678-9000 Fax: (508) 678-9447
34
Electric Oven Assembly
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Electric Oven Assembly
35
Illus. No.
Part No.
Qty.
Description
1
2
3
4
19
20
21
22
23
14
15
16
17
18
27
28
29
30
24
25
26
9
10
11
12
13
7
8
5
6
803005
--------*
--------*
150300
802800
802801
154004
150309
802799
122200
150303
105500
319202
154002
150300
803100
320611
150301
130400
150300
154001
121012
152014
--------*
150207
120081
120080
152008
121011*
--------** -
153009
320607
1
1
-
2
1
1
1
2
1
1
2
1
1
1
2
1
1
2
1
2
1
1
3
1
2
-
-
-
-
-
1
882772*** 1
Large Electric Oven Box ONLY
Electric Oven Assembly Complete
Electric Element
#10-16 x 1/2” Hex Washer TEK Screw
Sail Switch Box with Bracket and Cover ONLY
Sail Switch Box Assembly Complete
(includes illus. nos. 4 through 12)
Twin Speed Nut
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Sail Switch Box Cover and Bracket ONLY
Sail Switch ONLY
#4 x 3/4” Pan Head “A” Machine Screw
Sail Switch Actuator Rod
Sail Switch Damper (flat)
1/8” Push On Fastener
#10-16 x 1/2” Hex Washer TEK Screw
Electric Oven Front Cover ONLY
Large Relay Box Cover ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
290° Hi-Limit
#10-16 x 1/2” Hex Washer TEK Screw
#10-24 Speed Nut
Terminal Lug for 110-8 Wire
1/4-20 Free Spin Wash Nut
Oven Relay
#10-24 x 5/8” Truss Head Machine Screw
Internal Ceramic Insulator (2 per element)
External Ceramic Insulator (2 per element)
#10-32 Hex Nut (4 per element)
Bus Bar
Terminal Lug
#10 Star Washer (2 per element)
Large Electric Oven Right Side Cover ONLY
Steam to Electric Interface Plate...Not Illustrated
*
Refer to Electric Oven Component Application Chart on page 46.
** Consult factory for wiring harness required.
*** Needed when converting from steam heat to electric heat.
Telephone: (508) 678-9000 Fax: (508) 678-9447
36
Sail Switch Assembly
Illus. No.
Part No.
Qty.
Description
3
4
5
1
2
8
9
6
7
319203
319202
319201
319200
154004
154002
150309
150303
122200
881706
1
1
1
1
1
1
4
2
1
1
10 105500 1
American Dryer Corporation
Sail Switch Mounting Bracket
Sail Switch Damper (flat)
Sail Switch Box Cover
Sail Switch Box
Twin Speed Nut
1/8” Push On Fastener
#10-16 x 1/2” Hex Head TEK Crimptite Screw
#4 x 3/4” Pan Head “A” Machine Screw
Sail Switch ONLY
Sail Switch Box Assembly Complete
(includes illus. nos. 1 through 10)
Sail Switch Actuator Rod
88 Currant Road / Fall River, MA 02720-4781
Single-Phase (1ø) Motor, Electric Relay Panel Assembly 37
Illus. No.
Part No.
Qty.
Description
3
4
1
2
5
6
7
8
12
13
14
15
9
10
11
151000
150300
150008
120716
322817
882662
882663
2
2
2
1
1
1
1
#6-32 Pal Nut
#10-16 x 1/2” Hex Washer TEK Screw
#6-32 x 1-1/4” Phillips Pan Head Machine Screw
2-Position Terminal Block
Mounting Plate ONLY
Rear Electric Panel Assembly Complete - 120 Volt
(includes illus. nos. 1 through 14)
Rear Electric Panel Assembly Complete - 208-240 Volt
(for gas and steam models Only)
818395 1
(includes illus. nos. 1 through 14)
Rear Electric Panel Assembly Complete - 208-240 Volt
(for electric models Only)
882652
882653
1
1
(includes illus. nos. 1 through 14)
Transformer Assembly - 120 Volt
Transformer Assembly - 208-240 Volt (for gas and steam models Only)
818396 1 Transformer Assembly - 208-240 Volt (for electric models Only)
136008 1 or 2 Fuse Holder
136049
136057
1
2
3/4-Amp (Slo-Blo) Fuse ONLY - 120 Volt
1/2-Amp (Slo-Blo) Fuse ONLY - 208-240 Volt
150301
150297
152004
121010
153002
132459
121300
1
1
1
1
1
1
3
#8-18 x 7/16” Phillips Pan Head TEK Screw
#10 x 1/2” Hex Washer TEK Screw (green)
5/16-18 Hex Nut
L-70 Ground Lug
5/16” Lock Washer
3-Pole Contactor
Open/Closed Bushing
Telephone: (508) 678-9000 Fax: (508) 678-9447
38
3-Phase (3ø) Motor, Electric Relay Panel Assembly
Illus. No.
Part No.
Qty.
Description
1
2
3
4
5
151000
150300
150008
120701
120716
322817
882664
818400
882665
818395
882667
1
1
1
2
2
2
1
1
1
1
1
6
11
12
13
14
15
7
8
9
10
882653
818396
882654
136008
136057
150301
150297
152004
121010
153002
132459
121300
American Dryer Corporation
1
1
2
1
1
1
3
1
2
2
1
1
#6-32 Pal Nut
#10-16 x 1/2” Hex Washer TEK Screw
#6-32 x 1-1/4” Phillips Pan Head Machine Screw
4-Position Terminal Block (for models mfd. with 3ø motors)
2-Position Terminal Block (for models mfd. with 1ø motors)
Mounting Plate ONLY
Rear Electric Panel Assembly Complete - 208-240 Volt
(for gas and steam models Only)
(includes illus. nos. 1 through 14)
Rear Electric Panel Assembly - 208-240 Volt (for electric models Only)
(includes illus. nos. 1 through 14)
Rear Electric Panel Assembly Complete - 380-416 Volt
(for gas and steam and 3ø motor electric models Only)
(includes illus. nos. 1 through 14)
Rear Electric Panel Assembly Complete - 208-240 Volt
(for electric models Only)
(includes illus. nos. 1 through 14)
Rear Electric Panel Assembly Complete - 380-416 Volt
(for electric models with single-phase [1ø] motor Only)
Transformer Assembly - 208-240 Volt (for gas and steam models Only)
Transformer Assembly - 208-240 Volt (for electric models Only)
Transformer Assembly - 380-416 Volt
Fuse Holder
1/2-Amp (Slo-Blo) Fuse ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
#10 x 1/2” Hex Washer TEK Screw (green)
5/16-18 Hex Nut
L-70 Ground Lug
5/16” Lock Washer
3-Pole Contactor
Open/Closed Bushing
88 Currant Road / Fall River, MA 02720-4781
460-480 VAC 3-Phase (3ø) Motor, Electric Relay Panel Assembly 39
Illus. No.
Part No.
Qty.
Description
8
9
10
11
12
6
7
4
5
13
14
15
16
1
2
3
150009
120701
830208
824161
135501
120768
150301
150297
152004
121010
153002
132459
322817
883332
830262
151000
120765
121300
141403
1
1
1
4
2
1
1
1
2
2
1
1
1
1
1
2
4
2
1
132070 1
Telephone: (508) 678-9000
#6-32 x 1-1/2” Phillips Pan Head Machine Screw
4-Position Terminal Block
Transformer Assembly (460 VAC) for Micro Models ONLY
Transformer Assembly (460 VAC) for Non-Micro Models ONLY
1-Amp Double-Pole Circuit Breaker (460 VAC Only)
35 x 15mm Din Rail
#8-18 x 7/16” Phillips Pan Head TEK Screw
#10 x 1/2” Hex Washer TEK Screw (green)
5/16-18 Hex Nut
L-70 Ground Lug
5/16” Lock Washer
24 VAC 3-Pole Contactor
Mounting Plate ONLY
Rear Panel Assembly Complete (460 VAC) for Micro Models ONLY
(includes illus. nos. 1 through 14)
Rear Panel Assembly Complete (460 VAC) for Non-Micro Models ONLY
(includes illus. nos. 1 through 14)
#6-32 Pal Nut
End Stop
Open/Closed Bushing
Control Voltage Transformer (24V) for Micro Models except 36 Kw Oven
Models
Control Voltage Transformer (24V) for 36 Kw Oven Micro Models ONLY
Fax: (508) 678-9447
40
Reversing Electric Relay Panel Assembly
Illus. No.
Part No.
Qty.
Description
10
11
12
13
14
6
7
8
9
3
4
1
2
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
150300
150008
120701
132458
882653
825428
882654
136008
136057
150301
150297
152004
121010
153002
132459
322812
882673
883335
882676
1
1
15
16
151000
120765
2
1
American Dryer Corporation
#10-16 x 1/2” Hex Washer TEK Screw
#6-32 x 1-1/4” Phillips Pan Head Machine Screw
4-Position Terminal Block
3-Pole Reversing Contactor
Transformer Assembly - 208-240 Volt (for gas and steam models Only)
Transformer Assembly - 208-240 Volt (for electric models Only)
Transformer Assembly - 380-416 Volt
Fuse Holder
1/2-Amp (Slo-Blo) Fuse ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
#10 x 1/2” Hex Washer TEK Screw (green)
5/16-18 Hex Nut
L-70 Ground Lug
5/16” Lock Washer
3-Pole Contactor
Rear Electric Mounting Plate ONLY
Rear Electric Panel Assembly Complete - 208-240 Volt
(for gas and steam models Only)
(includes illus. nos. 1 through 16)
Rear Electric Panel Assembly Complete - 208-240 Volt
(for electric models Only)
(includes illus. nos. 1 through 16)
Rear Electric Panel Assembly Complete - 380-416 Volt
(includes illus. nos. 1 through 16)
#6-32 Pal Nut
Standard End Bracket
88 Currant Road / Fall River, MA 02720-4781
460-480 VAC Reversing Electric Relay Panel Assembly 41
11
12
13
14
15
16
17
18
7
8
5
6
1
2
3
4
9
10
Illus. No.
Part No.
Qty.
Description
132458
150297
121010
152004
153002
132459
150300
830208
824161
120765
322817
883327
1
1
1
1
1
1
4
1
1
2
1
1
--------*
151000
150009
120701
135501
120768
112068
121300
141403
1
2
2
1
1
2
1
1
1
24 VAC Reversing Contactor
#10 x 1/2” Green Hex Washer TEK Screw
L-70 Ground Lug
5/16-18 Hex Nut
5/16” Lock Washer
24 VAC 3-Pole Blower Contactor
#10-16 x 1/2” Hex Washer TEK Screw
Transformer Assembly (460 VAC) for Micro Models ONLY
Transformer Assembly (460 VAC) for Non-Micro Models ONLY
End Stop
Mounting Plate ONLY
460 VAC Reversing Rear Electric Panel Assembly Complete
For Micro Models ONLY
(includes illus. nos. 1 through 16)
460 VAC Reversing Rear Electric Panel Assembly Complete
For Non-Micro Models ONLY
(includes illus. nos. 1 through 16)
#6-32 Pal Nut
#6-32 x 1-1/2” Phillips Pan Head Machine Screw
4-Position Terminal Block
1-Amp Double-Pole Circuit Breaker
35 x 15mm Din Rail (sold by the inch)
3-Phase (3ø) Power Input Label
Open/Closed Bushing
Control Voltage Transformer (24V) for Micro Models ONLY
* Not available at time of printing.
Telephone: (508) 678-9000 Fax: (508) 678-9447
Air-Operated Steam Damper Assembly
23
24
25
26
27
28
29
30
18
19
20
21
22
13
14
15
16
17
8
9
10
11
12
100472
143110
100472
100496
143238
100498
150002
153010
152000
330987
152002
153007
100520
153007
152002
115995
102350
151007
152007
100497
100492
152002
153007
Illus. No.
Part No.
Qty.
Description
3
4
1
2
5
6
7
165009
153002
152004
152002
153007
820321
803415
1
2
2
2
1
2
2
1
1
1
1
1
1
1
1
1
4
4
6
4
1
6
Steam Coil Assembly
5/16” Lock Washer
5/16-18 Hex Nut
1/4-20 Hex Nut
1/4” Lock Washer
Steam Damper Hinge Assembly
4
2
1 Steam Damper Assembly
(includes illus. nos. 7, 10, and 11)
4 1/4” Lock Washer
4 1/4-20 Hex Nut
108 Steam Damper Gasket (sold by the inch)
1
1
Steam Damper Foam (68-1/2” length)
7/16-20 Stainless Steel Acorn Nut
7/16-20 Hex Nut
1-1/4” Bore x 3” Stroke Piston
Piston Support Bracket
1/4-20 Hex Nut
1/4” Lock Washer
1/4” x 1/8” Connector
1/4” Tubing (sold by the foot)
1/4” x 1/8” Connector
1/8” Needle Valve
1/8” Close Nipple
3-Way Micro Valve - 24 VAC
#6-32 x 1” Phillips Round Head Machine Screw
#6 Star Washer
#6-32 Hex Nut
Micro Valve Support Bracket
1/4-20 Hex Nut
1/4” Lock Washer
1/8” N.P.T. Silencer (muffler)
43
Telephone: (508) 678-9000 Fax: (508) 678-9447
44
Outer Top/Back Guard Assemblies
Illus. No.
Part No.
Qty.
Description
1
2
3*
4
5
6*
7
8
9
322809
150301
323738
320008
150301
150300
312527
320007
314511
150301
103500
1
4
1
1
Back Electrical Box Cover
#8-18 x 7/16” Phillips Pan Head TEK Screw
Top Back Guard (for gas models Only)
Top Back Guard (for electric models Only)
7 #8-18 x 7/16” Phillips Pan Head TEK Screw
10 #10-16 x 1/2” Hex Washer TEK Screw
1
1
Outer Top (for gas models Only)
Outer Top (for electric models Only)
1 Bottom Back Guard
13 #8-18 x 7/16” Phillips Pan Head TEK Screw
4 Leveling Leg
* There is no outer top or top back guard on steam models.
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Microprocessor Coin Acceptors Listing
NOTE: Coin acceptors listed include optical switch.
Replacement optic switch for Hanke acceptor (ADC Part No. 881143).
Replacement optic switch for Greenwald acceptor (ADC Part No. 137056).
ADC Part No.
883363
882689
125100
125107
881768
881604
125103
125121
125133
Single Coin*
Nation Description
United States 25¢ Hanke Optic Coin Acceptor with Four (4) Studs
(for models mfd. as of June 25, 2002)
25¢ Hanke Optic Coin Acceptor United States
(for models mfd. between June 15, 2000 and June 25, 2002)
U.S. and Canada 25¢ Greenwald Optic Coin Acceptor
Australia
Australia
Japan
---
---
Hong Kong
(for models mfd. prior to June 15, 2000)
20¢ Greenwald Australian Optic Coin Acceptor
$1 Hanke Australian Optic Coin Acceptor
100 Yen Hanke Optic Coin Acceptor
0.882 Token Greenwald Optic Coin Acceptor
0.800 Token Greenwald Optic Coin Acceptor
$1 Greenwald Hong Kong Optic Coin Acceptor
Dual Coin*
883367
881842
881542
881846
881541
United States
Canada
United Kingdom
France
Netherlands
10¢/25¢ Hanke Dual Optic Coin Acceptor
25¢/$1 Hanke Dual Optic Coin Acceptor
1£/20 Pence Hanke Dual Optic Coin Acceptor
2/5 Franc Hanke Dual Optic Coin Acceptor
25¢/$1 Guilder Hanke Dual Optic Coin Acceptor
* Consult factory for coin acceptors not listed.
45
Telephone: (508) 678-9000 Fax: (508) 678-9447
2 4
2 4
2 4
3 0
3 0
2 5
3 6
3 6
3 6
3 3
3 0
3 0
K w V o l t
2 0 8
2 4 0
4 6 0 / 4 8 0
P h a s e W i r e
3 ø 3 o r 4
O v e n A
P a r t s s e m
N o .
b l y *
Q t y .
E l e m e n t s
S i z e P a r t N o .
O v e n W i r e T e r
Q t y .
S i z e P a r t N o .
Q t y .
m i n a
P a r l t
L u g
N o .
8 2 4 4 2 2 6 6 1 2 0 0 1 5 1 # 2 8 8 2 5 6 2 1 1 2 1 0 1 0
P /
B
N u s
1 2
B
1 0 a r
1 1
1
3 ø 3 8 2 4 0 2 6 6 6 1 2 0 0 1 4 1 # 2 8 8 2 5 6 2 1 1 2 1 0 1 0 1
O v e n R e l a y
C a .t
N o .
P a r t N o .
D P A 9 3 1 3 1 3 5 8
D P A 9 3 1 3 1 3 5 8
3 o r 4 8 0 2 7 6 4 1 2 0 0 1 4 # 8 8 8 2 5 7 2 1 2 1 0 1 0 D P A 5 3 1 3 1 3 5 9
3 8 0
2 0 8
2 4 0
3 ø
3 ø
3 ø
3 ø
3 o r 4
3 o r 4
3
8 2 7 0 4 4
8 2 4 9 1 8
8 4 0 2 5 9
6
6
6
6
6
6
5
5
1 2 0 0 0 2
1 2 0 0 1 2
1 2 0 0 1 3
1
1
1
1
# 6
# 4
# 4
8 8 2 5 5 6
8 8 2 5 6 6
8 8 2 5 6 6
1
1
1
1
1 2 1 0 3 3
1 2 1 0 1 0
1 2 1 0 1 0
1
1
1
1
D P A 5 3
D P A 9 3
D P A 7 3
1 3 1 3 5 9
1 3 1 3 5 8
1 3 1 3 7 6
4 1 6
4 6 0 / 4 8 0
3 8 0
2 0 8
2 4 0
4 6 0 / 4 8 0
3 ø
3 ø
3 ø
3 ø
3 ø
3 ø
3 o r 4
3 o r 4
3 o r 4
3 o r 4
3
3 o r 4
8 3 5 0 6 4
8 3 4 8 0 4
8 2 6 3 9 1
8 2 4 9 1 6
8 8 3 3 9 1
8 8 3 3 9 2
4
4
4
5
5
5
6
6
6
6
6
6
1 2 0 0 1 3
1 2 0 0 1 3
1 2 0 0 1 3
1 2 0 0 1 0
1 2 0 0 1 1
1 2 0 0 1 1
# 4
# 6
# 8
# 8
# 8
# 8
1
1
1
1
1
1
8 8 2 5 7 1
8 8 2 5 7 2
8 8 2 5 7 1
8 8 2 5 6 6
8 8 2 5 6 8
8 8 2 5 7 2
1
1
1
1
1
1
1 2 1 0 1 0
1 2 1 0 1 0
1 2 1 0 1 0
1 2 1 0 1 0
1 2 1 0 1 0
1 2 1 0 1 0
1
1
1
1
1
1
D P A 4 3
D P A 4 3
D P A 4 3
D P A 7 3
D P A 6 3
D P A 3 3
1 3 1 3 5 7
1 3 1 3 5 7
1 3 1 3 5 7
1 3 1 3 7 6
1 3 1 3 6 9
1 3 1 3 5 2
* When ordering Oven Assembly Complete, specify 3 wire or 4 wire when applicable, as well as if dryer has microprocessor controller (computer) or non-microprocessor controls.
Additional Parts Available
Part No.
Description
112039 “Black/White/Green Ground” Label
112280 “Clean Lint Screen” Label
112534 “Phase 5 OPL Program Location Summary” Label
114001 “CAUTION - Exhaust/Lint Screen” Label
114006 “WARNING - Fire Hazards” Label
114094 “MOP HEAD WARNING” Label
117505 Aluminum Duct Tape (sold by the foot)
120100 3/8” Straight (BX) Connector
120300 3/8” x 45° (BX) Connector
120400 3/8” Red Jacket (BX) Insulator
120500 3/8” Jiffy Clip (BX retainer clip)
120600 3/8” Greenfield (BX)
120800 Recept, Fast On Splice
120802 Red Butt Connector
120902 #74B Wire Nut
120903 Closed End Connector
121014 1/4” Insulated (female) Terminal
121499 5-1/2” Wire Tie
121500 8” Harness Tie
121503 Harness Tie Mounting Clip
122804 Manometer (hydro gauge) for Measuring Gas Pressure
404500 Almond Brush-In-Cap Bottle Touch-Up Paint
404502 White Brush-In-Cap Bottle Touch-Up Paint
404506 Almond “B” Brush-In-Cap Bottle Touch-Up Paint
404507 Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint
404515 Coral Blue Brush-In-Cap Bottle Touch-Up Paint
404516 Ivory Brush-In-Cap Bottle Touch-Up Paint
410001 1/2” Allen Wrench (for removal of shutoff valve tail piece)
882458 Basket (tumbler) Puller Assembly
47
Telephone: (508) 678-9000 Fax: (508) 678-9447
ADC 450430 1 - 10/30/00-25 2 * 02/20/03-15
advertisement
Related manuals
advertisement