PENTAX IQZoom EZY-S, EZY-S Camera OPERATING MANUAL

 PENTAX
1QZoonEZY'S
| 1QZoonEZYS
OPERATING MANUAL
QUARTZ DATE
Congratulations on your purchase of the
PENTAX MZosEZYS and welcome to the
world of Pentax zoom compact photogra-
phy!
* Please read this manual carefully before
operating the camera to take consistently
superior pictures.
* Pay special attention to the cautions and
notes in this Operating Manual. Pictures
and illustrations used in this manual may
differ from the camera's actual appear-
ance.
* lllustrations in this operating manual are
the DATE MODEL.
Icon indications used in this manual
Operation direction
Attention
Lamp lighted
Lamp blinking
Correct
Incorrect
Automatic operation
— TABLE OF CONTENTS
Names of working parts
LCD panel .…….…........eeecencessescencee
For safe you of your camera .............c...
Precautions for your camera .................
Precautions for battery usage =...
PREPARATIONS BEFORE TAKING
PHOTOGRAPHS
Strap attachment ..............——eieeeeenverer—
installing / Replacing battery .................
Battery exhaustion warning...
Main switch and battery check ..............
Holding the camera...
Operating 38-70mm zoom lens -...........
TAKING PHOTOGRAPHS
Film loading =...
Viewfinder displays -......-.....e.-erree=ee—
Lamp indications ...еееееаеененнееенееееотот!
Taking pictures —...........e-re=eeeerereetne
Focus-lock shooting ..........—..-—-eeeeeíes
Hard-To-Autofocus Subjects ...............
Unloading film =...
TAKING BETTER PHOTOGRAPHS
How to select modes / Red-eye reduction flash
mode _...….....….....….…-serreecercesente scene encre 22
Daylight-sync shooting ...........—.=——-— 23
Taking pictures at a slow shutter speed
« Slow Shutter Speed (Flash-OFF) 24
Slow-Speed-Sync Shooting (Flash-ON) …… 24
Backlight compensation .........-....==—=e=íe—— 25
« Bulb shooting .........-.e==.——. rarer TE 26
* Bulb-sync Shooting ..........—.=——=re=e=mereees 26
Self-timer photography 27
Infinity-landscape shooting ........-e.—.———=—- 28
Date Model ..…..........…..…erreaceeneeeeeecees 29
Practical shooting guide -.........--...=.<ere=meee— 31
Troubleshooting 32
Specifications .…....….…......eeccesceceeceeeenee 34
Warranty policy .......00.00000 centres eee 36
NAMES OF WORKING PARTS
EE 10
| mr
= JR
LCD PANEL
O Strap lug (p.7) |
@ Shutter release button (p.10)
© Main switch (p.9)
O Mid-roll rewind button (p.21)
@ AF/infinity-landscape
/Drive button (p.22)
@ LCD panel
@ Mode button (p.22)
© Red-eye reduction lamp but-
ton (p.22)
© Built-in flash
® Viewfinder window
® Lens
@® Autofocus window
(P Self-timer lamp (p.27)
@ Light sensor window
® Viewfinder eyepiece
® Green lamp
® Zoom lever (p.11)
® Film information window
® Back cover release lever
(p.12)
@ Battery chamber cover (p.8)
@ Tripod socket
@ Back cover
All indications will not actually appear simultaneously as shown.
285
a
@ Red-eye reduction flash
mode (p.22)
O Flash off (p.24, 25, 26)
© Flash on (p.23, 24, 26)
O Slow-Speed Shutter (p.24)
@ Exposure counter (p.14)
@ infinity-Landscape Mode
(p.28)
su
ï
Les
LILIC
O Self-timer (p.27)
O Backlight compensation
(p.25)
O Bulb (p.26)
{ Battery exhaustion warning
(p.8)
FOR SAFE USE OF YOUR CAMERA
Although we have carefully designed this camera for safe operation, please be sure to follow
precautions given in this page.
AWARNING This mark indicates precautions that if not followed, could result in seri-
ous injury to the operator.
ACAUTION This mark indicates precautions that, if not followed, could result in
minor or medium injury to the operator or damage to the equipment.
A WARNING A CAUTION
* The electric circuits inside the camera con- * Do not use the flash near anyone's eyes,
tain high voltage working parts. Never as it may hurt them. Be particularly careful
attempt to disassemble the camera your- with the flash around infants.
self. * Never try to disassemble, short or
* Never touch internal parts of the camera if
they become exposed from dropping the
camera or for some other reason, as there
is danger of electric shock.
* Wrapping the strap around your neck is
dangerous. Make sure that small children
do not the strap caught their neck.
* Be sure to store batteries out of the reach
of children. Seek medical assistance
immediately if accidentally swallowed.
recharge the battery. Also, do not dispose
of the battery in fire, as it may explode.
* Remove the battery from the camera
immediately if it becomes hot or begin to
smoke. Be careful not to burn yourself dur-
ing removal.
— PRECAUTIONS FOR YOUR CAMERA
Precautions when taking pictures
+ Do not use the camera where it may come in
contact with rain or water because the camera is
not weather resistant. Should the camera get
wet from rain or splashing water, wipe it off
immediately with a dry soft cloth.
- Do not drop the camera or allow it to hit a solid
object. If the camera suffers a severe shock or
impact, take it to a Pentax service center for
inspection.
. Condensation on the interior or the exterior of
the camera may be extremely harmful to the
camera mechanism as it may cause rust and / or
corrosion. Furthermore, if the camera is taken
from warm temperature to a subfreezing one or
vice versa, the formation of icelets may cause
damage. In such a case, put the camera into a
case or plastic bag so that any changes in tem-
perature will be as gradual as possible. After
temperature difference is minimized, the camera
may be removed from the bag.
Do not apply force to the zoom lens; do not place
the camera with lens facing downward.
* Dirt, mud, sand, moisture, toxic gas, water, salt
water, etc., penetrating the inside of the camera
may cause damage or render it inoperable.
Damage of any kind will not be repaired under
the terms of the warranty and charges may be
assessed. Therefore, handle the camera with
great care.
Precautions for proper care
. Use a blower and lens brush to remove dust
accumulated on the lens or the viewfinder win-
dow.
» Never use solvents such as paint thinner, alco-
hol or benzine to clean the camera. To clean the
external camera surfaces, - but not glass sur-
faces; using a dry or silicone treated cloth is
recommended.
. The electric circuitry inside the camera containts
high voltage working parts. Never attempt to dis-
assemble the camera.
Precautions for storage
* Avoid leaving the camera for extended periods
in places where temperature and humidity are
high such as in a car.
* Do not store the camera in a closet with moth-
balls or in a case where chemicals are handled.
Store itin a place with good air circulation to pre-
vent fungus growth.
Other precautions
* The temperature range at which this camera
functions properly is 50°C to - 10°C (122°F to
14°F).
* To maintain optimum performance, it is recom-
mended that the camera be inspected every one
or two years. If the camera has not been used
for an extended period, or is being prepared for
an important photographic session, it is recom-
mended that you have the camera inspected or
test shoot with it.
Repairs made necessory due to the camera
being subjected to any of the conditions warned
about in this precautions section, or any other
precaution or warning throughout this operating
Manual, are not covered under the terms of the
warranty and charges may be assessed.
PRECAUTIONS FOR BATTERY
Precautions for battery
* Misuse of a battery can cause hazards such as
leakage, overheating, explosions, etc. The bat-
tery should be inserted with the “+ and *-” sides
tacing correctly.
* Never try to disassemble, short or recharge the
battery. Also do not dispose of the battery in a
fire, as it may exploded.
* Battery performance may be temporarily hin-
dered in low temperatures, but will recover in
normal temperatures.
* Keep a spare battery on hand for replacement
convenience when shooting outdoors or while
traveling.
- Keep the battery out of the reach of children.
* When the camera is in a bag, make sure the
main switch is off; otherwise, battery power may
be wasted if the shutter release button is acci-
dentally pushed.
STRAP ATTACHMENT
"PREPARATIONS BEFORE mm
TAKING PHOTOGRAPHS
familiarize yourself with certain funda: ©
X=
mentals before taking any photographs. _ *
10m = = .
Fit the strap on the camera as illustrated. Use the
illustrated part of the strap for opening the battery
chamber cover, adjusting the data on the Date
model, or pushing the mid-roll rewind button to
rewind a film before exposing all the frames.
Installing / Replacing battery
BATTERY EXHAUSTION WARNING Use one 3V lithium battery (CR-123A or DL-123A).
Ensure that the power is off before replacing the
battery.
1. Open the battery chamber cover by using the
strap clamp's protrusion.
2. Insert one lithium battery with the plus / minus
(+/-) slides matching the indications in the bat-
tery compartment.
3. Close the battery chamber cover. Ensure that
the cover is locked with a click.
* If the battery is correctly loaded, the zoom lens
moves slightly and the motor operates for a few
seconds.
‚On the DATE MODEL, the data is initialized
when the battery chamber cover is opened.
8
Battery exhaustion warning
When the battery is nearly exhausted, the battery
symbol [d 28] appears on the LCD panel to
warn you. Replace the battery as soon as possi-
ble. When [4 8] starts blinking, no operations
can be performed.
Battery life (using 24-exposure film rolls):
Approx. 15 rolls
Using flash 50% of the time (using the CR123A
battery and under Pentax testing conditions).
Actual battery life / performance may vary drasti-
cally depending on usage of Auto-Focus, Power
Zoom, Flash and external conditions such as tem-
perature and freshness of the battery.
Notes on replacing the battery:
* Ensure that the power is off before replacing the
battery.
* After the battery is replaced, correct the time and
date.
MAIN SWITCH AND BATTERY CHECK
indi
Main Switch
To switch on, push the main switch button. The
lens extends slightly to 38mm and the LCD panel
is now on. To switch off, push the main switch but-
ton again.
* When not in use, ensure that the camera is
switched off.
* Use one 3V lithium battery, type CR123A or the
equivalent. Do not remove the battery before it is
exhausted. If the battery is removed, the data on
the DATE MODEL is initialized.
* The lens cover automatically opens and closes
when the main switch is turned on and off. Do
not attempt to open the lens cover manually.
Battery check
After you turn the main switch ON, the lens slight-
ly extends and the lens cover opens. You are now
ready to shoot.
« See page 8, when the battery exhaustion symbol
(42H) apperas on the LCD panel.
* If the camera is on and left unused for over 3
minutes, the lens automatically retracts and the
power switches off to save the battery power.
HOLDING THE CAMERA
V
Ai)
Hold the camera as still as possible and steady it
against your face. Depress the shutter release
button gently. (If too much force is applied,the
camera is likely to shake, and the picture will be
blurred.) If possible, brace your body against a
stable, stationary object such as a wall. When
using the flash with the camera positioned verti-
cally, hold the camera so that the flash is above
the lens.
10
Notes:
* Do not hold the zoom lens because it moves
back and forth while in operation.
* Make sure not to obstruct the autofocus window,
lens, light sensor window or the built-in flash with
your fingers, hair or other object.
OPERATING 38 - 70mm ZOOM LENS
um
There are four positions at which the lens stops,
namely 38mm, 50mm, 60mm and 70mm.
Consequently, when you release your finger from
the zoom lever during zoom, the lens stops at the
closest of the positions of 38mm, 50mm, 60mm or
70mm.
When you move the zooming lever to the right
(4), the lens moves towards the telephoto side.
When you move the zooming lever to the left
(444), the lens moves towards the wide angle
side. |
Note:
The shutter cannot be released while the lens is
zooming.
11
FILM LOADING
TAKING PHOTOGRAPHS
After reading this instruction manual
you should be familiar with the func-
tions available on the camera, and
you're ready to insert the film.
12
1. Open the back cover as illustrated.
* Ensure the power is off before loading the
film.
2. Place the film cartridge in the film chamber by
fitting its flat side on top of the rewind shaft first
and then top end into the camera.
3. Pull the film leader out far enough from the car-
tridge to reach the take-up spool. Align the tip
of the film with the film leader end mark @.
4. Close the back cover. The film automatically
advances to the first frame.
e Ny
Ta А SE
E
X Slack No!
———
O Flat Yes!
Notes:
+ Ensure the film is placed properly between the
film guides.
» If there is dirt on the film detector @, film cannot
be wound properly.
* Ensure the film is taut as illustrated on the illus-
tration to the left. Take up any slack in the film by
pushing it back into the cartridge.
“ |f the end of the film leader is extremely bent,
straighten it or cut off the bent portion.
13
di
(EY
5. When [ ! ] appears in the exposure counter on
the LCD panel, the film automatically stops
winding. Ensure that [ { ] apears on the LCD
panel.
6. If [ € ] blinks on the LCD panel, it means that the
film is not properly loaded. Reload the film
again.
* When the main switch is turned OFF, the num-
ber of frames or [ £] indication will remain for 5
seconds on the LCD panel.
14
Film and Film Speed Setting.
* Use a DX-coded film with ISO rating from 25 to
3200. When any of these films are loaded, the
proper film speed is automatically set for the
camera.
* Non-DX coded films cannot be used. If non DX-
coded film is used, the camera automatically set
the film speed to ISO 25.
* À film with ISO400 film speed is recommended
to get less image blur and to cover more of pho-
tographic situations.
- Use high-speed films with ISO 800 or higher
mainly for shooting indoors or in dimly-lit condi-
tions.
* Use of negative color film (print film) is recom-
mended.
VIEWFINDER DISPLAYS AND LAMP INDICATIONS
VIEWFINDER DISPLAYS
Le)
LO ©
© Autofocus frame
Center this frame over the subject.
e © © ©
@ Close distance compensation
frame
When the camera-to-subject distance
is less than 1m, compose the scene
within this frame. |
O Picture area
When taking a normal picture, com-
pose the scene within this frame.
LAMP INDICATIONS
Blinking:
When you depress the shutter release
button halfway down, the green lamp
lights up or blinks.
When the subject is in focus and the the
flash is fully charged, the green lamp will
light up to indicate that you can take the
picture.
If either the camera-to-subject distance
is less than 0.8m or the flash is being
charged, the green lamp will blink and
you cannot release the shutter.
- While the lamp is blinking, you cannot
release the shutter.
- Ensure that the lamp is lit continously
before taking pictures.
- When the flash is being charged, [+]
on the LCD panel also blinks.
15
TAKING PICTURES [Shooting distance: 0.8m (2.6ft) - 00 (infinity)]
1. Composing the scene O The subject is too close. Extend the camera-to-
After zooming the lens and composing your subject-distance until the green lamp is lit con-
scene, center the autofocus frame over the tinuously.
main subject. O The flash is being charged. Lift your finger from
the shutter release button for a few second until
2. Checking the lamp indication the flash is fully charged. Then depress the
When the shutter release button is depressed shutter release button again. When the flash is
halfway down, the camera focuses automati- being charged, [4] on the LCD pane! also
cally. blinks.
* If you wish to focus on another subject, lift your
* The subject closer than 0.8m (2.6ft) cannot be finger from the shutter release button, recom-
focused properly. pose, and then depress the shutter release but-
* The lamp blinks for one of the following reasons. ton halfway down again.
* If the autofocus window is dirty, the autofocus
16 may not function properly.
3. Shooting
Fully depress the shutter release button.
Note:
- When the shutter is released, the self-timer lamp
momentarily lights up to indicate that a picture
has been taken.
Flash effective ranges (Nega-color film used)
Lens —— SO | 100 200 400
0.8-3.5m | 0.8 -5.0m 10.8 -7.0m
38mm (444) | (26-111) | (2.6-16ft) | (2.6-23ft)
0.8 - 2.0m | 0.8 - 2.8m | 0.8 - 4.0M
70mm (4) | (2.6-6.68) | (2.6-9.28) | (26-130)
Automatic Flash Emission
When the shutter release button is depressed
halfway down in low light, the flash is automatical-
ly charged and the lamp lights up and [+4] will
appear on the LCD panel indicating the flash is
ready to discharge.
«The automatic flash emission is automatically
set when the main switch is turned on.
17
FOCUS LOCK SHOOTING
It you shoot without positioning the autofocus
frame (( )) on the main subject as shown above,
only the background will be in focus. When the
main subject is off the autofocus frame in the cen-
ter of the viewfinder, use the focus-lock technique.
(Focus lock is the function to lock focus on an off-
center subject.)
18
1 Focus on the subject with the autofocus frame
(12).
2 When the shutter release button is depressed
halfway down, the green lamp lights up and the
exposure and focus are temporarily locked.
HARD-TO-AUTOFOCUS SUBJECTS
TT 1
LI IK
3 While holding the shutter release button
halfway, re-aim the camera or recompose the
picture, then release the shutter by depressing
the shutter release button all the way.
Note:
* You can release the focus lock simply by lifting
your finger from the shutter release button.
The autofocus system is highly precise, but not
perfect. Some subjects may not focus as you
wish. In this case, use the focus-lock technique
on another subject near the actual one and
equidistant from the lens. Subjects which may
fool the autofocus system include:
a) Black or very dark objects, which don’t reflect
much light (and therefore don’t reflect
infrared autofocus beams.)
b) Wire netting, latticework, iron exercise-bars,
etc.
c) Flickering light sources such as neon signs,
fluorescent lamps, TV images, sunlight com-
ing through trees, etc. and subjects illuminat-
ed by these light sources.
d) Glossy and reflective surfaces like glass, mir-
ror, car bodies, etc.
e) Fast-moving objects, like trains or automo-
biles in motion.
f) Water jets, water surface, smoke, flame, fire-
works, etc. which have no distinct or consis-
tent form, or a subject in mist.
19
UNLOADING FILM (Remove the film from the camera in the shade or by using your body to shade the camera)
_ 36 >| cy]
y
0 8
1. Rewinding the film
After you have exposed the last frame of the roll,
the lens retracts and the film rewinds automatical-
ly. After rewinding, the motor stops, and [7] blinks
as shown to indicate that the film has been
rewound.
* [8] blinks for approx. 5 sec. after the whole film
roll is rewound.
* А 24-exposure roll of film takes about 20 sec-
onds to be rewound.
* The entire roll of film including the film leader is
always rewound into the cartridge to prevent any
part of the film being exposed to light.
20
2. Unloading the film
To unload the film, open the back cover, and
remove the cartridge from the chamber by pulling
the top out first.
Notes:
* Never open the back cover until the whole film
roll is rewound.
* The shutter may be released a frame or two
even after the specified number of frames have
been used up as indicated by the number of
shots shown on the film cartridge. If this occurs,
these extra frames may be lost in processing.
Rewinding a film in mid-roll * The lens retracts and then film rewinding starts.
If you wish to unload a film before exposing all the « When rewind is completed, the motor stops and
frames, push the mid-roll rewind button with the [2] blinks, indicating that the back cover may be
protrusion part of the strap clamp. opened safely.
21
HOW TO SELECT MODES / RED-EYE
TAKING BETTER PHOTOGRAPHS OW TO SELECT MODES /
To set various exposure modes, depress the mode button @. The mode selection will change each
time that the mode button is depressed.
al +k
Auto Daylight- Slow-Shutter Slow- Backlight Buib Bulb-sync
Sync speed speed-sync compensation (Flash-OFF) — (Flash-ON)
(Flash-ON) — (Flash-OFF) — (Flash-ON) — (Flash-OFF)
% 2) > 18> OE ®B ls 5 BL
al
Turn the power on by depressing the main switch button.
* To set various required modes, depress the button @, each time.
To set shooting modes, depress the drive button @.
Y |
e
Single-Flame — Selt-Timer Infinity-Landscape
Shooting Shooting Shooting
Red-Eye Reduction Flash Function
To reduce the red-eye phenomenon in the picture, depress the red-eye reduction flash button [O]. With
this mode, the self-timer lamp lights up for approx. 1 second just before the main flash is discharged to
reduce the appearance of the red-eye effect. To cancel this mode, depress the red-eye reduction button
agaln.
22
DAYLIGHT - SYNCHRO SHOOTING
Depress the mode 7
button until the [$]
symbol appears on
the LCD panel. The
7 flash will discharge
— in both dark and
bright conditions. When a portrait is taken with the
subject in a backlight situation, the front of the
subject may be cast in shadow. In such a case,
use the Daylight-Synchro Shooting mode (Flash-
ON mode) within the flash-effective range to take
pictures. This will ensure that a picture is well
exposed without any shadow. When you wish to
discharge the flash, use this mode. In this mode,
the flash will always discharge.
Note:
- Make sure youre within the flash effective range
even when you use the built-in flash as a fill-in
flash in daylight. See page 17. |
With Daylight-Sync
TAKING A PICTURES AT A SLOW SHUTTER SPEED
Slow Shutter
Speed (Flash-OFF)
Depress the mode
button until the
[58] symbol
appears on the LCD
panel. In this mode, the flash does not discharge,
and a picture is taken at a slow shutter speed up
to approx. 2 second. Use it in places where the
flash photography is prohibited, such as in the-
aters and museums. Furthermore, this mode is
also useful for a natural existing light effect in low
ambient photography.
24
те == Slow-Speed-
| 30; à / Synchro Shooting
— lf (Flash-On)
> + Oa Q« | Depress the mode
Bh O button to set the
slow-shutter-sync
mode until the [ 589] symbol appears on the LCD
panel. It is possible to photograph subjects and
background in a balanced way / by using the built-
in flash to properly expose the foreground subject
and a siow-speed to expose the low light back-
ground.
Notes:
- When shooting in low light, the shutter speed
gets slower, and camera shake is likely to blur
your picture. Use of a tripod is recommended.
* Make sure you are within the flash effective
range even when you use the built-in flash as a
fill-in flash in daylight. See page 17.
BACKLIGHT COMPENSATION
Purpose
Indoor portraits
against an outside
window, blue sky or
| other bright back-
и | grounds often result
in underexposure because the exposure is auto-
matically set for the background. Backlight
Compensation makes good use of natural lighting
to improve the balance of light between the sub-
ject and the rest of the picture.
How to Set
Depress the Mode Button until the [SP] symbol
appears on the LCD panel.
Note:
- When using Backlight Compensation in a dimly-
lit place, the shutter speed may be so slow that
you should use a tripod to prevent camera кой a В
shake. Ls ay ; В RN a
With Backlight Compensation
25
BULB, BULB - SYNCHRO SHOOTING
Bulb Mode
[SB] Purpose
The shutter remains
open as long as the
shutter release but-
ton is held down.
This mode is useful for long exposures required
for shooting fireworks and night scenes, for exam-
ple.
How to Set
Depress the mode button until [DB] appears on
the LCD panel.
Note:
The camera should be mounted on a tripod so
that the camera will be steady.
Bulb-Synchro
Mode [$B]
Purpose
This mode lets you
use the flash in addi-
tion to the Bulb
mode, so you can take a portrait photograph with
a night scene in the background, for example.
26
Bulb mode, approx. 3 sec. (150100)
How to Set
Deprees the mode button until [4B] appears on
the LCD panel.
Notes:
* Make sure you're within the flash effective range
even when the Bulb-Synchro Mode is in used.
See page 17.
* The camera should be mounted on a tripod so
that the camera will be steady.
EE
| SELF-TIMER PHOTOGRAPHY
Self-Timer
Purpose
Use the self-timer if
you wish to get in
the picture. Use of a
tripod is recom-
mended.
How to Use
- Depress the AF / infinity drive button until [©]
appears on the LCD panel.
* Focus on the subject first by depressing the
shutter release button halfway, and then depress
the shutter button fully.
How to Cancel
* To stop the self-timer operation at any time after
it's been activated, push the main switch again.
+ When the self-timer is working, the lamp lights
up for approximately 7 seconds and then will
start blinking 3 seconds before the shutter is
released, letting you know when to smile.
Notes on the self-timer shooting
* Use of a triod is recommended.
+ Keep in mind that when starting the Self-Timer
while standing in front of the camera, the camera
may not focus on the subject.
- When you want to use the flash with the self-
timer, ensure that the lamp is lit indicating the
flash has been charged before operating the
self-timer.
27
INFINITY-LANDSCAPE SHOOTING
When you wish to take a sharp picture of a distant
landscape or a distant subject through a window,
the infinity-Land Mode allows you to capture dis-
tant scenery with clarity.
Depress the AF Infinity / Drive button until
(ad ) appears on the LCD panel.
* After the picture is taken by fully depressing the
shutter release button, this mode is canceled.
* In this mode, the flash will not discharge.
28
DATE MODEL
Year Month Day
> Ü
LEE
e
Day Month Year
If you purchased the DATE model, read this sec-
tion. The DATE model records dates up to the
year 2049 on pictures.
Switching the Mode
Press the DATE button @ with your finger, the
mode on the LCD panel switches as shown in the
chart.
Notes:
» >. indicates no data will be imprinted.
« "M” on the LCD panel indicates “Month”.
* Use the strap clamp’s protrusion to depress the
SELECT and ADJUST buttons.
Correcting the date
1. Depress the SELECT button @ to make a dif-
ferent category of digits on the LCD panel that
you want to change blink.
2. Depress the ADJUST button © to change dig-
its of the specified category you chose with the
SELECT button. Digits increase by one each
time you depress the ADJUST button ©.
Holding down the button will advance digits
continuously.
3. After the data has been adjusted, depress the
SELECT button @ each time until blinking
stops.
- Depress the SELECT button @ each time. The
bar mark (—) appears on the LCD panel, indicat-
ing that data imprinting choices are possible.
« The blinking “ : “ allows precise fine-tuning of the
internal clock to the beginning of a specified
minute. To do so, depress the DATE button @
until “Day-Hour-Minute” digits appear and then
depress the SELECT button @ to make the “ : “
blink. Then depress the ADJUST button € in
sync with a time signal.
- If you release the shutter while the blinking data
is being corrected, the data cannot be imprinted.
29
Operational precautions
The data on the LCD panel is imprinted on each
frame you expose.
* "Year-Month-Day” and “Day-Hour-Minute” can-
not be imprinted at the same time.
* As you release the shutter, the bar(—) mark on
the display blinks for a few seconds, indicating
the data has been imprinted.
* If there is a white or yellow object in the corner
of the picture where the data is imprinted, the
data may be difficult to read. When composing
your photographs, try to avoid brightly-colored
subjects in that corner.
* The date in the picture above is simulated.
30
PRACTICAL SHOOTING GUIDE
—| 5 | Flash photography
Taking a picture in low light situations. ….…...….….…seesmeenmenmensenneenenennnennennnnnennnnnnnennnnenannnnnnenenne p.17
MINIMIZING the red-eye GffeCt. ……………….….……crereneeneemenennennennnennnenennnnnnnnnennennnnnnnen sn p.22
Taking a portrait when the subject's face is cast 100) N KeREREEREFREERRRKRREEE EEE KK URREEES p.23
Taking a picture of people with sunset scenery in the background......................206 10. m6000ee menear ende p.24
Taking a picture of people with night scenery in the background. ..................e=-.—e2eneeneee nene een e p.26
10] Taking pictures of people in various situations
Taking a portrait when the subject is in shadow. .............e...e.ereiriieeceee ree er enero econ ace rDenener ca reenecanocrenenos p.23
Taking a picture of people with sunset scenery in the background.................e...... 80m. entrenan eno p.24
Taking a picture of people with night scenery in the background. ..................ee.ieeeeeer nece reee ene p.24
Putting yourself into a picture. .................. nnrarrooormonorelteerenoroo rentar roncemencarrrreroterncivaeraneraneneeeneconoaraconerncenreneeeees p.27
|
+] Landscape photography
Taking a picture of people with sunset scenery in the background... P-24
Taking a picture of night SCEnery..………..…..……ceeneeeemennmençennnenentnnnnenenennnnnnenansnn=ennentenn=en p.26
Taking a picture of people with night scenery in the background. ...............——...... PES PSE TEE p.26
? | over
Imprinting date on a picture.................-—=--..-.—... eee re ee eee p.30
31
TROUBLESHOOTING
What appears troublesome may be easily remedied. Here are some problems that may occur and their
remedies.
Symptoms Causes and Remedies
1. The shutter cannot be released. | + 15 the main switch turned off? If so, turn it on. See page 9.
* ls the battery exhausted? Replace it or insert new battery if it
is exhausted. See page 8.
* Is [2] blinking on the LCD panel? If so, the film has been used
up. Insert a new roll. (See page 12.)
2. My printed pictures don't look very | » Did you position the autofocus frame on your subject? See
clear. page 16.
* Did you obstruct the autofocus window with your fingers, hair
or other object when you depress the shutter release button?
See page 10.
* ls the autofocus window dirty? Wipe it off. See page 16.
3. Zoom lens retracted automatically | - Did you leave the camera unused for over 3 minutes after the
(the power is turned off automati- | main switch was turned on? The power is automatically
cally) switched off if the camera is left unused for over 3 minutes.
See page 9.
32
+,
- Symptoms |
DO PITA
Causes and Remedies
not dark.
4. The flash discharges, though it ti is
. Daylight sync mode has been set. See page 23.
Flash effective ranges other than ISO 100, 200 or 400 9 (Noge -color film used)
3emm( 444) 0.8-1.8m 0.8-2.5m 0.8-10.0m 1.1 -14.0m 1.5*-20.0m
(2.6-5.9) (2.6-8.2ft) (2.6-33ft) (3.6*-46ft) (4.9*-65.6ft)
7Omm(4) “+ 0.8-1.4m 0.8-5.6m 0.8-8.0m 0.8-11.3m
(2.6-4.6ft) — (2.6-18ît) (2.6-26ft) (2.6-371t)
* With high speed film, overexposure may. occur at close range due to the film's high speed.
** The proper exposure will not be obtained.
33
SPECIFICATIONS
Type:
Film:
Format:
Film loading:
Film winding:
Film rewinding:
Frame number:
Lens:
Focusing system:
Zooming:
Shutter:
Self-timer:
Viewfinder:
34
35mm fully automatic leaf-shutter with built-in zoom lens and auto flash
Auto film speed setting with 35mm perforated DX-coded film with ISO
rating from 25-3200 (1EV step). Non-DX coded films are automatically
set to 15025
24 x 36mm
Auto film loading. Closing the back cover will automatically wind the film
to first exposure.
Auto film-winding, single frame advance mode.
Auto start at the end of roll. Auto stop upon completion of rewinding.
Rewinding time:approx. 20 sec. with 24-exposure film. Rewinding in mid-
roll provided.
Automatic readout of successive frame numbers in ascending order
when shooting, and descending order when rewinding.
Pentax power zoom 38-70mm f/4.8-8.5 5 elements in 5 groups, Angle of
view: 59° — 34.5”,
Pentax infrared active autofocusing with focus lock, Range: 0.8m (2.6ft)-
infinity. Maximum magnification approx. 0.10X. Focus lock is provided.
Electronic zoom in four positions.
Programmed AE electronic shutter with speed approx.1/300 - 2 sec.
Bulb. Electromagnetic release.
Electronic red lamp indication. Approx.10 sec. Cancellation after activa-
tion is possible.
Actual image zoom viewfinder. 83% of field of view ratio. Magnification:
0.42X (38mm WIDE) - 0.69 X (70mm TELE), Diopter: -1m +, Autofocus
frame, Picture frame, Close distance compensation frame, Green lamp
lighting ( O ): possible to take a picture, Green lamp blinking: When sub-
ject is too close and / or flash is being charged.
Exposure control: ————— Programmed auto-exposure control. Range: EV10-EV17 at 38mm
WIDE,EV12.5-EV19 at 70mm TELE in Auto or Daylight-Synchro mode
(ISO 400), EV8.0-Ev17 at 38mm WIDE EV8.0-EV19 at 70mm in Slow-
Shutter-Speed mode, |
Backlight compensation:— +1 SEV
Flash: Built-in flash with red-eye reduction mode, Automatic flash emission in low-
| luminance, Flash ON=Day-light Synchro/Slow-Shutter-Speed Synchro (up
to 2 sec.), Flash-OFF=Flash override, Bulb-Synchro,
Flash effective range: 0.8-7.0m (38mm WIDE), 0.8-4.0m (70mm TELE) (ISO 400 film used).
Flash recycling time: Approx. 7 sec. under Pentax testing conditions.
Battery source: — One lithium battery CR123A or the equivalent
Battery life: — Approx. 15 rolls of 24-exposure film when 50% of shooting uses flash
(under Pentax testing conditions) |
Size & Weight: 120.5 (W) x 70.5 (H) x 48.5 (D) mm (4.7” x 2,8” x 1.9") 2259 (7.902) with-
out battery
DATE model:
Date mechanism: Crystal quartz controlled; LCD with digital clock, auto calendar up to 2049.
imprinting mode: — — “\еаг,Мот№ апа Day”, “Day,Hour and Minutes”, “---- blank”, “Month, Day
and Year” or “Day, Month and Year”.
120.5 (W) x 70.5 (H) x 50.0 (D) mm (4.7 x 2.8" x 2.07) 230g (8.107) with-
out battery
Size & Weight:
SPECIFICATIONS ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTIFICATION OR ANY
OBLIGATION ON THE PART OF THE MANUFACTURER.
35
WARRANTY POLICY
All Pentax cameras purchased through authorized
bona fide photographic distribution channels are
guaranteed against defects of material or work-
manship for a period of twelve months from date
of purchase. Service will be rendered, and defec-
tive parts will be replaced without cost to you with-
in that period, provided the equipment does not
show evidence of impact, sand or liquid damage,
mishandling, tampering, battery or chemical cor-
rosion, operation contrary to operating instruc-
tions, or modification by an unauthorized repair
shop. The manufacturer or its authorized repre-
sentatives shall not be liable for any repair or
alterations except those made with its written con-
sent and shall not be liable for damages from
delay or loss of use or from other indirect or con-
sequential damages of any kind, whether caused
by defective material or workmanship or other-
wise; and it is expressly agreed that the liability of
the manufacturer or its representatives under all
guarantees or warranties, whether expressed or
implied, is strictly limited to the replacement of
parts as herein before provided. No refunds will
be made on repairs performed by non-authorized
Pentax service facilities.
36
Procedure During 12-month Warranty Period
Any Pentax which proves defective during the 12
month warranty period should be returned to the
dealer from whom you purchased the equipment
or to the manufacturer. If there is no representa-
tive of the manufacturer in your country, send the
equipment to the manufacturer, with postage pre-
paid. In this case, it will take a considerable length
of time before the equipment can be returned to
you owing to the complicated customs procedures
required. If the equipment is covered by warranty,
repairs will be made and parts replaced free of
charge, and the equipment will be returned to you
upon completion of servicing. If the equipment is
not covered by warranty, regular charges of the
manufacturer or of its representatives will apply.
Shipping charges are to be borne by the owner. If
your Pentax was purchased outside of the coun-
try where you wish to have it serviced during the
warranty period, regular handling and servicing
fees maybe charged by the manufacturer’s repre-
sentatives in that country. Notwithstanding this,
your Pentax returned to the manufacturer will be
serviced free of charge according to this proce-
dure and warranty policy.
In any case, however, shipping charges and
customs clearance fees are to be borne by the
sender. To prove the date of your purchase
when required, please keep the receipts or bills
covering the purchase of your equipment for at
least a year. Before sending your equipment for
servicing, please make sure that you are send-
ing it to the manufacture’s authorized represen-
tatives or their approved repair shops, unless
you are sending it directly to the manufacturer.
Always obtain a quotation for the service
charge, and only after you accept the quoted
service charge, instruct the service station to
proceed with the servicing.
This warranty does not apply to Pentax prod-
ucts purchased in the United States.
Therefore, for warranty information regard-
ing Pentax products purchased in the United
States, please read the warranty card sup-
plied with your product.
C The CE Mark is a Directive conformity mark
of the European Community.
STATEMENT OF FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions :
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Changes or modifications not approved by the party
responsible for compliance could void the user’s
authority to operate the equipment.
This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pur-
suant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmiu! interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harm-
ful interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the fol-
lowing measures :
+ Reorient or relocate the receiving antenna.
+ Increase the separation between the equipment
and receiver.
» Consult the dealer or an experienced radio/T Vv
technician for help.
Asahi Optical Co., Ltd. 11-1 Nagata-cho I-chome, Chiyoda-ku, Tokyo 100-0014, JAPAN (Internet://www.pentax.co.jp/)
Uy Pentax Europe n.v. Weiveldlaan 3-5, 1930 Zaventem, BELGIUM (Internet://www.pentaxeurope.com/)
Pentax GmbH. Julius-Vosseler-Strasse 104, D-22527 Hamburg, GERMANY (Internet://www pentax.de/)
Pentax U.K. Limited Pentax House. Heron Drive, Langley. Slough Berks SL3 8PN. U.K. ( Internet:7/www.pentax.co.uk/)
Pentax FRANCE S.A. 12/14, rue Jean Poulmarch. 95100 Argenteuil, FRANCE
Pentax Benelux B.V. (for Netherlands) Spinveld 25, 4815 HR Breda, NETHERLANDS (Internet://www pentax.ni/)
(for Belgium & Luxemburg) Weiveldlaan 3-5. 1930 Zaventem, BELGIUM (Internet://www pentax.be/)
Pentax (Schweis) AG IndustriestraBe 2. 8305 Dietlikon, SWITZERLAND (Intemet://www pentax.ch/)
Pentax Scandinavia AB PO. Box 650, 75127 Uppsala, SWEDEN (Internet://www pentax.se/)
Pentax Corporation 35 Inverness Drive East, Englewood, Colorado 80112. U.S.A. Internet://www pentax.com/)
Pentax Canada Inc. 3131 Universal Drive, Mississauga. Ontario L4X 2E5, CANADA
Copyright © Asahi Optical Co.Ltd. 2000
57157 ENG 01-0008 Printed in China
">