Pentax ME Super Camera Návod k obsluze

Pentax ME Super, a reliable and advanced SLR camera, offers creative control with its interchangeable lenses and a range of manual and automatic shooting modes. Capture sharp images with its precise focusing system and accurate exposure metering. Explore the flexibility of aperture-priority and shutter-priority modes, or rely on the camera's automatic modes for hassle-free photography. Enjoy the convenience of depth-of-field preview and a self-timer for creative compositions. Preserve your memories with the Pentax ME Super's durable construction and timeless design.

PDF

নথি

বিজ্ঞাপন

SERVICE MANUAL

Disassembling and assembling procedures are almost the same as 23900 and/or

23901. Therefore, the details of disassembling and assembling procedures are abbreviated.

Here is explained about special items for 23903.

Disassembly

Bottom cover assy. (A400)

CSS 1.7 x 3 x 2

CSS 1.7 x 2

Connector seat (A23)

Winding lever assy. (0-C69)

Cover screw (C139-01)

Winding lever nut (C8)

Winding lever assy, (0-C69)

Winding lever friction spring left handed left handed

(C7-01)

23600K-C135-A

23600K-C134-A-2

Rewinding knob assy. (0-D6), ASA ring assy. (D-D11-01)

Rewinding knob assy. (0-D6)

Nut (D15)

*Washer (D21)

ASA ring assy. (0-D11-01)

*Washer (D2l)

To adjust the torque of click of ASA ring.

Top cover assy. (A300)

Top cover retainer screw A (A333) x 2

B (A334)

C (A342) x 2

D (A345)

*Top cover assy. (A300)

Material of Top cover assy. (A300) is a plastic. But the surface is made conductive by surface treatment. So that the electrical conductive does not apply on the back of Top cover assy. (A300).

Unsoldering

1) P.C. board pattern (T100)

2) Relay P.C. board assy. (0-A129)

Before unsoldering, take out Insulation seal (A152) to prevent melting by soldering iron.

23903 Page 1 of 32

3) f-volume (K101)

4) Hot shoe contact A (N4), Hot shoe contact C (N9)

5) EF switch contact piece (A44)

Before unsoldering, take out ASA volume (R100)

ASA volume retainer screw (A16-01)

CNL-D 1.7 x 2. 5

ASA volume (R100)

6) Connector base plate assy. (0-A21)

Self-timer charge lever assy. (0-A118)

Self-timer screw (A122)

Self-timer charge lever assy. (0-A118)

Self-timer collar (A123)

W30

231K-H50

7. Body covering

Body covering, right (A19)

Body covering, left (A20)

After peel off, re-install Self-timer charge lever assy. (0-A118)

Front board and Mirror housing complete assy.

At the charged condition.

CNL-D 1.7 x 3 x 2

P.C. board pattern retainer (I1)

W14

Front board retainer screw (A132-01) x 4

P.C. board pattern (T100)

T-CNL-E 1.7 x 4

Hot shoe contact piece A (N4)

Insulation collar (N8)

Insulation plate (N13)

T-CNL-E l.7 x 3

Hot shoe contact piece C (N9)

CNL-D 1.4 x 3

LED retainer collar (T212)

23903 Page 2 of 32

*PC board pattern (T100)

LED part in P. C. board pattern (T100) should be taken out straight and carefully to prevent making scratches on Shutter speed scale indication plate (M10).

*P.C. board pattern (T100)

It is recommended that P.C. board pattern (T100) is taken out from Mirror housing under the condition separated from Body proper (A1). due to difficulty of LED part taken out and/or installed.

Assembly and Adjustment

Cocked indicator assy. (0-C23) Check the spring tenSion.

At the released condition, the spring should have no tension.

If the spring tension is stronger at the charged condition, 2nd curtain speed will be affected. Accordingly, 1/2000sec will be changed by its spring tension. (l/2000sec should be not changed by its spring tension.)

2. Adjustment of Main SW

At the condition of release plate assy. (A500) goes up completely, adjust 0.5mm clearance between the contact pieces by turning eccentric screw.

Adjust the clearance by eccentric screw in the range shown below to prevent the side of screw touching the body when the shutter rod pushed down or up.

If the clearance is wider than 0.5mm, the shutter will be stayed open at the

1st exposure when released by Self-timer or Winder.

EF- switch contact piece (A44)

The clearance of

should be within 0.3mm.

Adjust the clearance by bending the part of

23903 Page 3 of 32

Bulb off adjustment

Install *the temporary top cover and set the shutter dial Bulb.

Within the range

, 2nd curtain should be released. Adjust by eccentric screw.

Confirmation

1) Change the shutter dial 125X. And release the shutter. The shutter speed should be1/125 sec, not 1/500 or l/l000sec.

the shutter button. The shutter speed should be 1/125 sec, not 1/500 or l/l000sec.

*The temporary top cover

Dumper lever plate assy. (0-B90)

Adjust the actuating torque by turning Nut (B96).

About 1.5 teeth out from the surface of nut (B96).

The level of actuating torque is depends on the greatness of mirror bounce.

Confirmation

1) When drop the mirror seat from up-position, an afterimage of dumper lever plate down and up can be seen after the mirror seat hitted with the dumper lever plate.

2) When pushed down the dumper lever plate, and returned slowly, the dumper lever plate should be returned to the original position completely by its own tention. If not, check *Friction washer (B94).

*Friction washer (B94)

Material: Calfskin a.

It is prohibited to apply any grease in order to the material of friction washer (B94) is calfskin.

When install, fluffy surface should be faced up.

23903 Page 4 of 32

5. Check of Shutter block (0-E000) by using T-adjuster

It is prohibited to adjust the curtain speed and the shutter speed in

0-E000. If the curtain speed and the shutter speed was out of tolerance, replace Shutter block (0-E000) to new one.

The curtain speed and the shutter speed must be checked before install the mirror housing to the body.

*The curtain speed is especially important for 23903 so that l/2000sec.

is adopted.

*The auto-manual speeds are already decided on T100. The auto-manual speeds which decided on T 100 can not get if the adjustment of timing switch in 0-E000 was no good.

Insert Connector (23900-I 100) to

Adapter for T-adjuster. Distribute lead wires as shown left.

To actuate the auto-manual hutter, install temporary top cover and set the shutter dial AUTO or M, or insert 2 mm diameters pin between

C14-01 and C24.

Time-sequence of SWg and SWm

It is requested that Adapter for checking the time-sequence of SWg and

SWm should be made by your own side.

Adjusting procedures and the tolerance are the same as 23900.

P.C. board pattern (T100)

1) LED part

LED retainer collar (T212)

CNL-D 1.4 x 2.5

Confirm that LED insulation seal (I18) was sealed on the back side of

LED supporting plate.

23903 Page 5 of 32

2) LED positioning

Use P.C. board pattern checker (239 PATTERN CHECKER). Adjust LED position by sliding the LED supporting plate.

Each LED should be aligned with its figure in the view-finder.

3) As installing Photo-cell part to Cell frame (N1), insert P.C. board to the connector.

4) Photo-cell part

Hot shoe contact piece C (N9)

T-CNL-E 1.7 x 3

Insulation plate (Nl3)

Insulation collar (N8)

Hot shoe contact piece A (N4)

T-CNL-E 1.7 x 4

Front board and Mirror housing

Shutter block

Mirror housing charged condition released condition

*lAThen installed, take care about lead wires.

Front board retainer screw (A132-01) 4pcs.

W14

P. C. board retainer (I1)

CNL-Dl.7 x 3 x 2

After installed, check the functions of shutter.

Mechanical back focus.

45,46 ± 0.04mm

10. Soldering

The location of solder refer to page 1 and 2.

Especially, red and blue lead wire should be positioned between Relay P.C. board assy. (0-A129) and Prism seat assy. (0-M2), as shown left. — to prevent from catching between the top cover and the prism seat.

11. ASA volume (R100)

ASA volume retainer scerw (A16-01)

CNL-D 1.7 x 2. 5

12. Bottom cover assy. (A400)

Connector seat (A23)

Bottom cover assy. (A400)

CSS 1.7 x 3 x 2

CSS 1.7 x 2.2

13. Load the batteries

G13 x 2

23903 Page 6 of 32

14.

Confirm the function of LED of P.C. board pattern and/or LED positioning

*If P.C. board pattern checker is not ready, adjust LED position at this time.

Confirm the function of LED as follows.

1) After the main switch was ON, LED stays on about 30 sec..

2) LED indicates as Manual-mode at when the top cover does not install.

3) LED should be changed the indication when connect the points as mentioned below.

A — D Auto-mode CBA D =ground b.

B — D Manual-mode

LED keeps down

C — D Manual-mode

LED keeps up

15.

Install ASA ring assy. (0-D11-01) temporary.

When set ASA ring out of 1X, red LED of EE should be flickering.

16.

Install the temporary top cover.

17.

Adjust the auto shutter-speed and the LED indication.

1) Auto shutter-speed

EV12

ASA100 1X f8 — using f8 set ring

2.8V

supply

Shutter dial AUTO

*Nominal speed

Light value correction unit

KA-00- 1A

Regulated D. C. power

15.6 ms

Adjust by VR1. After adjusted, check other EVs. (EV16 1X, EV16 1/2X,

EV8)

Standard of shutter speed is the same as 23900.

*Standard of 1/2000sec.

0.49±0.7EV ms.

(0.30

0.81 ms.)

2) LED indication

EV12

ASA 100 lX f8

2.8V

Shutter dial AUTO

LED of 60 should be turned on at the above combinations.

Adjust by VR2. LED of 60 should not move to next LED when changed ASA from 80 to 125.

After adjusted, check other EVs.

23903 Page 7 of 32

3) Auto manual-speed and the indication

Shutter dial M Shutter speed tester (7F-9Aa.

Check the curtain speed at 1/l000sec.. 6.5ms or faster at 21mm distance b.

Check each shutter speed from 1/2000 sec. ~ 4 sec..

Each LED should be turned on when changed the shutter speed, and

OVER or UNDER LED must be flickering when non-proper exposure was made.

*As a general rule, use Light value correction unit and Shutter speed tester (7F-9A-2) for checking and/or adjusting the shutter speed and the indication. However, Shutter speed tester (7PE-25A3) may use by the circumstances.

4) LED indication and Shutter speed under the full-charged condition of AF-

2OOS or AF-160

When load 2.4V between the ground and Hot shoe contact piece A (N4), LED indication and the shutter speed are as below.

a. LED indication M — flickering

125X — on b. Shutter speed

9.6 -— 11.8ms

5) Battery check

2.4V

2.65V

LED off or flickering

LED on

18.

Remove ASA ring and the temporary top cover

19.

Clean the view-finder

*Do not use the air-compressed blower to clean the view-finder. It will be caused by taking out Shutter speed indication plate (M10).

20.

Top cover assy. (A300)

Check the conductivity of Switch board (A318) before install Top cover assy. (A300).

At Shutter dial AUTO

— the ground

B — the ground

— the ground

OFF

OFF a.

At Shutter dial M

A — the ground

— the ground

OFF

C — the ground OFF

When pushed the bottom side button,

— the ground

When pushed the up side button,

C — the ground

23903 Page 8 of 32

If the conductivity of Switch board (A318) was good, install Top cover assy. (A300).

The point of installation is the same as 23900 ME.

Cover frame (A131)

Top cover retainer screw A (A333)

Top cover retainer screw B (A334)

Top cover retainer screw C (A332)

Top cover retainer screw D (A335)

2pcs.

After installed, check the function of LED by changing the shutter dial.

21.

ASA ring assy. (0-D11-01), Rewinding knob assy. (0-D6)

ASA ring assy. (0-D11-01)

Washer (D21)

Nut (D15)

After installed, check the function of click of ASA ring assy. (0-D11-

01). and the LED indication.

At 1/4X, 1/2X, 2X and 4X except 1X, EF red LED must be flickering. If not, check the clearance of ElF switch contact piece (A44) and lead wires and/or adjust ElF index plate (D23) assembled in ASA ring assy.

(0-D11-01), as shown below.

0-D11-01

D23

Fix D23 as pushing to the arrowed direction

Rewinding knob assy. (0-D6)

22.

Winding lever assy. (0-C69)

Winding lever friction spring (C7-01)

Winding lever assy. (O-C69)

Winding lever nut (C8)

Cover screw (C139-01) left handed left handed

Check the function of shutter and winding.

23600K0C134-A-2

23600K-C135-A

23.

Check the shutter button stroke Shutter dial Bulb a.

When pushed the shutter button deeper than 0. 2mm from the original position, LED should be turned ON before release the shutter.

Main switch ON position b.

After released 1st curtain, the shutter button can goes down

0. 1 - 0.5mm.

23903 Page 9 of 32

Shutter dial AUTO a.

Charge the self-timer.

Release the shutter by self-timer under main switch off. (No LED turned on.) c.

LED should be turned on surely before release the shutter.

If LED is turned on at the same time or after the shutter released, the shutter by actuating with self-timer or winder will be AUTO-TIME at 1st exposure under main switch off. In this case, the clearance of main switch is wider than 0. 5mm. The clearance should be adjusted less than

0. 5mm.

24.

Check the conductivity of Hot shoe and the full-charged indication Checking procedures are the same as 23901 MV.

25.

Focusing

26.

Remove Self-timer charge lever assy. (0-A118)

27.

Body covering

Body covering, left (A19)

Body covering, right (A20)

28.

Self-tirner charge lever assy. (0-A118)

W30

Self-timer collar (A123)

Self-timer charge lever assy. (0-A118)

Self-timer screw (A 122) 231K-H50

23903 Page 10 of

Special Tools

23903k-B95-A

23903K-B96-A

23903 Page 11 of

239 PATTERN CHECKER

Body

LED — to indicate shutter speed Switches

A-M — Auto-manual switch (for 23903)

UP-DOWN UP-DOWN switch for manual speed (for 23903)

*LED goes down when set DOWN position.

*LED goes up when set UP position.

EF —EF switch (for 23903)

*When set ON position, red LED at the top flickering.

SWT — Timing switch

SWM/SWG — Memory and Magnet switch

Power switch

*If use G13 x 2, power switch is ON when set

BATT ON.

*If use exterior power- sorce, power switch is

ON when set EXT ON.

Adapter

23903 Page 12 of

How to use

Preparation a.

If use two batteries (G13 x 2), load them to battery case.

If use exterior power sorce, connect the body and the exterior power sorce with connection cord. And set the voltage 2. SV.

Check 23900 P.C. board pattern a.

Install the adapter for ME to the connector.

Set Power switch OFF and insert P.C. board pattern to the connector of adapter.

Set ME-MV switch to ME side d.

Set Timing switch ON.

Set Memory switch ON.

Check the LED function a.

Power switch ON. At this time, check LED lights on.

Turn VR-dial and check each LED light on or not. If LEDs in slow speed side does not light on even if VR-dial turned fully, cover up the photosenser part step by step.

Check the shutter function

*Shutter speed indicated with LED in P.C. board pattern can be checked by the lighting time of LED of checker body.

Set a shutter speed by turning VR-dial. Slower speed is better to check.

To get accurate shutter speed, it need to give constant light on the phot-senser part.

Set Timing switch OFF.

Set Memory switch OFF.

At this time, LED of checker body lights on for the time indicated on P.

C. board pattern.

Repeat the above mentioned process. And check the shutter speed constant or irregular.

*Due to difficulty to confirm the accurate and/or irregular shutter speed, shutter speed checked by LED of checker body is judged a criterion for the time being.

Check 23903 P.C. board pattern a.

Install the adapter for ME-super to the connector.

Set ME-MV switch to ME side.

Insert P. C. board pattern to the connector of adapter.

Check the function and indication of auto-mode.

23903 Page 13 of

Check the function and indication of auto-mode a.

Set A-M switch to A-side.

Checking process is the same as ME mentioned before.

Check the function and indication of manual-mode a.

Set A-M switch to M-side.

Set UP-DOWN switch OFF position.

Confirm LED movement.

*LED should moves up and/or down to the direction which fixed by UP-DOWN switch.

Check the indication of EF

Red LED at the top should be flickering when set EF switch ON.

Check 23901 and 23904 P.C. board pattern a.

Install the adapter for MV to the connector.

Set ME-MV switch to MV side.

Insert P.C. board pattern to the connector of adapter.

Checking process is the same as ME. But the application range of VR is opposite.

23903 Page 14 of

Product No. 23903

PENTAX ME Super

Note: 1: The parts with numbers starting '0-' are assemblies

2: Only available parts are listed below.

Parts No.

0-A6

A10

0-A11

A13

A15

A16-01

A19

A20

0-A21

A23

A25

A26

A28

A30

A31

A32

A33

A34

A35

A36

A37

A38

0-A39

A42

Description

Back cover key

Back cover key collar

Back cover key retainer plate

Back cover guide screw

Strap hook assembly

(A6, A18)

Shutter light seal cover

Cassette receptacle

Back cover shaft receptacle

Battery case assembly

(A11, A12, A14)

Tripod seat

Back cover key retainer spring

ASA volume retainer screw

Body covering, left

Body covering, right

Connector base plate assembly

(A21, A22, A24 x 3)

Connector seat

Connector retainer screw

Light seal D

Light seal F

Light seal

Light seal A

Light seal B

Light seal C

Light seal tape

Light seal

Light seal J

Exposure-compensation selector seat assy

(A39, A40, A41)

Click spring

Qty

1 l

Interchangeability

23900-A2

23900-A3

23900-A4

23900-A5

23900-0-A6

23900-A8

23900-A9

23900-Al0

23900-0-A11

23900-A13

23901-A15

23901-A16-02

23900-A19

23900-A20

23900-0-A21

23900-A23

23900-A25

23900-A26

23900-A28

23900-A30

23900-A31

23900-A32

23900-A33

23900-A34

23900-A35

23900-A37

23900-A38

23903 Page 19 of 32

Parts No.

Description Qty

A43

A44

A45

A46

A100

A104

A105

A106

0-A107

EF switch contact piece installing seat

EF switch contact piece

EF switch contact piece insulation washer l

Stopper

Front board assembly

(A101, A102, A104, A105, A106 x 6,

A107, A108, A109, A110, A117, A121 x 2,

A124, A125, A126, A127, A128, A129,

A133, A134 x 2, A135, A136, A137, A138,

A139 x 3, A151 x 4, K101, K102, K103 x 2,

K104, K105 x 2, K106, K107, K108 x 2,

K109, CNS 1.7 x 2 x 2, CNS 1.7 x 2.5 x 4,

CNS 2 x 2.5 x 2)

Mount ring

Mount spring

Mount retainer screw

Mount lock button assembly

(A107, A108, A109)

A110

0-A111

Mount lock button spring

Mirror release lever assembly

(A111, A112, A113, A114, A115, A116)

Coupler lever spring A114

0-A118 Self-timer charge lever assembly

(A118, A119)

A120-01 Charge cam

A122

A123

0-A126

A127

0-A129

Self-timer screw

Self-timer collar

Synchro terminal assembly

(A126, A124, A125)

X contact relay plate

A130

A131

Relay P. C. board

(A129, A117, A121 x 2, A138, A139 x 3,

A151 x 4)

Light seal plate

Cover frame

A132-01 Front board retainer screw

A133 Lock pin supporter plate

A134 Diaphragm coupler ring retainer

A135

A136

Restitution spring

Light seal

A137

A152

Scratch protection seal

Insulation seal

A200-02 Back cover assembly

(A20 1-02, A202, A203, A207, A208 x 2,

A209 x 2, A210, A211, A212, A213,

A214-02, A219-02, A222-01 x 4,

A230 x 2)

Interchangeability

23900-A104

23900-A105

23900-A106

23900-0-A107

23900-A110

23900-0-A111

23900-A114

23900-0-A118

23900-A120-Ol

23900-A122

23900-A123

23900-0-A126

23900-A127

23900-A130

23900-A131

23900-A132-01

23900-A133

23900-A134

23900-A135

23900-A136

23900-A137

23900-A200-02

23903 Page 20 of 32

Parts No.

Description

0-A204

A220

A230

A300

Pressure plate assembly

(A204, A205, A206 x 2)

Pressure plate cover

Light seal

Top cover assembly

(A301, A303, A304, A305, A307, A 11,

A312, A313, A314, A315, A316, A317,

A318, A319, A320 x 2, A321, A322,

A323, A324, A325, A326, A327, A328,

A329, A330, A331, A332, A335, A336,

A337, A338, A339, A340 x 2, A341,

A343, A344, A347 x 4, D20,

CSS 1.7 x 4 x 4, T-CNS 1.7 x 3,

T-CSS 1.7 x 2.5 x 3, T-CNM 1.7 x 4)

Click pin A303

A304

A305

0-A307

A312

A313

0-A314

Click pin spring

Bearing

Click plate assembly

(A307, A311)

Auto-manual selector plate

Release button, bottom

Shutter buton assembly

(A314, A341)

Shutter button core

Shutter dial

A315

A316

A317

A318

A319

A320

A321

Release button

Switchboard

Switch board insulation sheet

Control button

Switch spring

A322

A323

0-A324

Accessory shoe

Accessory shoe spring

Accessory shoe base assembly

(A324, A325, A344)

Contact spring A A326

A327 Contact spring B

A328-01 Collar

A329 Retainer screw

A330-01 Insulation washer

A331 SW pin

A332

A333

A334

A335

Indication plate

Top cover retainer screw A

Top cover retainer screw B

Shutter indicator plate

Qty

Interchangeability

23900-0-A204

23900-A220

23900-A230

23900-A304

23901-0-A314

23900-A317

23900-A328-01

23900-A329

23900-A330-01

23900-A331

23900-A332

23602-A342-01

23903 Page 21 of 32

Parts No.

Description Qty

A336

A337

A338

A339

A340

A342

A343

A345

A346

A347

A400

A403

A405

A408

A500

A504

A507

A508

A510

A511

0-A513

0-B000

Window A

" B

" C

Insulation tape

Top cover retainer screw C

Shutter button retainer washer

Top cover retainer screw D

Nut

Accessory shoe retainer nut

Bottom cover assembly

(A401, A402, A408, C209)

Bottom winding cap

Battery cap

Scratch protection seal

Release plate assembly

(A501, A502, A503, A505, A506, A509,

A512, A513, A514, CNS 1.4 x 5)

Bulb actuator plate

Guide screw

Spring hook B

Release plate restitution spring

Connection spring

SW adjusting plate assembly

(A513, A512)

Mirror housing complete assembly

(B1, B2, B3, B4, B5, B6, B7, B8, B9,

B11, B12, B13, B14, B15, B1G, B17,

B18, B19, B20, B21, B22 x 2, B23,

B24, B25, B26, B27, B28, B30, B31,

B32, B33, B34, B35, B36, B37, B38,

B39, B40, B41, B42, B43, B44, B45,

B51 x 2, B52 x 3, B53, B54, B55, B57,

B60 x 2, B61, B62, B63, B70, B71, B81,

B82, B83, B84, B85, B86 x 2, B90, B91,

B92, B93, B94, B95, B96, B97, B98,

B101, B102, B103, B105, B106, B107,

B108, B109, B111, B112, B201, B202,

B203, B204, B205 x 4, B206, B207,

B208, B210, B211, B215, B216 x 3,

B217, B218, I8, I9, I10, I19, I300,

L1, M6, M7, CSS 1.7 x 2.2 x 6,

CSS 1.7 x 2.5 x 2, CNS 1.7 x 2,

CNS 1.7 x 2.5 x 3, CNM 1.7 x 3,

CNL-D 1.4 x 3. 5, CNL-F 1.7 x 2.5, W2,

W3, W27, W31, W36, W70, W78, W88, W89,

LW10, LW13, LW17 x 3, LW20)

Supporter plate, right 1

Supporter plate, left 1

Interchangeability

23900-A336

23900-A337

23900-A338

23900-A339

23900-A340

23901-A343

23900-A400

23900-A403

23900-A405

23900-A408

23900-A504

23900-A507

23900-A508

23900-A510

23900-A511

23900-B4

23900-B5

23903 Page 22 of 32

Parts No.

Description Qty

0-B7

0—B11

0-B12

0—B16

B17

B18

B20

B22

Hook lever B assembly

(B7, B6, B9, B86 x 2)

Mirror actuator lever assembly

(B11, B51, B210)

Diaphragm coupler lever assembly

(B12, B13, B15, B51, B81, B82, B83,

B84, B208, W88)

Restitution link A assembly

(B16, B19, B36)

Slide shaft nut

Restitution link slide shaft

Restitution link B shaft

Spring hook

B23

B24

0-B25

Release lever shaft

Release lever

B27

Restitution actuator lever hook plate assy. 1

(B25, B26)

Restitution actuator lever hook plate

shaft

Mirror up lever 1 B28

0-B30

0-B34

Restitution actuator lever assembly

(B30, B31, B33, B44, B211)

Shock absorber connection lever assembly. 1

(B34, B35, B39, B57)

Shock absorber lever 1 B38

0-B40 Shock absorber assembly

(B40, B41, B42, B45)

Restitution spring hook screw B43

B51-00A Mirror actuator collar a

-00B " " " b

B60

B61

B62

B63

B71

-00C " " " c

-00D " " " d

B32-00A Shock absorber collar a

-00B " " " b

-00C " " " c

-00D " " " d

-00E " " " e

B54 Shock absorber lever shaft

0-B55 Mirror seat assembly

(B55, B2, B3, B201, B202, B203, B204,

B205 x 4, B206, LW10)

Light seal

Light seal A

Light seal B

Light seal C

Spring washer

Interchangeability

23900-0-B16

23900-B17

23900-B18

2390Q-B20

23900-B23

23900-B24

23900-0-B25

23900-B27

23900-B28

23900-B38

23900-B43

23900-B51-00A

23900-851-00B

23900-851-00C

23900-851-00D

23900-B54

23900-0-B55

23900-B50

23900-B61

23900-B62

23900-B63

23900-B71

23903 Page 23 of 32

Parts No.

Description Qty

0-B90

B92

B93

B94

B95

B96

0-B98

Dumper plate assembly

(B90, B91)

Dumper plate shaft

Connection lever

Friction washer

Connection lever shaft

Nut

Mirror seat adjusting plate assembly

(B98, B97)

Mirror seat restitution spring B101

B102

B103

B105

B106

Diaphragm actuator lever spring

Diaphragm actuator spring

Hook lever restitution spring

Restitution actuator lever hook plate

spring

B107-01 Release lever restitution spring

B108-01 Mirror flip-up spring

B109 Mirror restitution spring

B111

B112

Shock absorber lever spring

Connection lever spring

B201-01 Light seal curtain

B203 Collar

B207 Washer

B215

B216

Mirror adhesive tape

Focus adjusting screw

B217

B218

B220

0-C1 Top mech. plate assembly

(C1, C13, C20, C27, C28, C29, C31,

C32, C33, C37, C43, C44, C46, C60,

C63, C64, C66, C142-01,

CNL-F l.7 x 2.5, W13, W75)

0-C2-02 Winding seat assembly

(C2-02, C4-01, C6, C14, C16-01, C17,

C18-01, C21, C24, C39, C47, C50-02,

C51, C52, C59, C61, C71-01, C76, C78,

I200, CNS 1.4 x 2, CNS 1.4 x 4.5,

CNM 1.4 x 1.4, W6, W89, LW13 x 2)

C5-01 Winding lever click cam 1

C7-0l

0-C12

C14

Light seal

Dust prevention seal

Light seal

Winding lever friction spring

Winding lever nut

Winding spring assembly

(C12, C137, C138)

Switch actuating lever

Interchangeability

23900-B101

23900-B102

23900-B106

23900-B107-01

23900-B201-01

23900-B203

23900-B207

23900-B215

23900-B216

23900-B217

23900-B218

23900-B220

23900-0-C1

23901-C5-01

23900-C7-01

23900-C8

23900-0-C12

23903 Page 24 of 32

Parts No.

Description Qty

C71-01

C72

C73

C75

C78

C79

C80

C81

0-C101

C51

C53

C54

C57

C59

C15-01

C16-01

C17

Counter dial indicator

Receiving claw

Winding lever click spring

0-C18-01 Transporting claw assembly

(C18-01, C47)

C21 Release lock lever

0-C22-01 Winding shaft assembly

(C22-0l, C48 x 2, C67 x 2, C68, C140,

C141-01, C154, C201)

0-C23 Cocked indicator assembly

(C23, C74)

C24

C25

Shutter control lever

Counter retainer plate

0—C26

C30

C31

C34-01

C40

C49

Winding stopper assembly

(C26, C41-01, C42, C65, C77, LW10)

Main gear

2nd gear

Counter dial

Sprocket shaft pin

Cocked indicator lever shaft

C63

C54

C65-01

0-C69

0-C102

Restriction lever shaft

Winding seat retainer screw

Counter dial indicator retainer screw

Counter dial spring

Release lock lever spring

Shutter restriction lever spring

Cam lever spring

Silent ratchet spring

Transporting claw spring

Winding lever assembly

(C69, C70)

Release lock lever shaft

Winding shaft retainer

Transporting marker

Cocked indication marker

Counter dial indicator stopper

Winding lever click spring

Winding stopper retainer screw

Strap hook retainer

Bottom mech. plate assembly

(C101, C110, C118, C120)

Winding guide plate assembly

(C102, C103, C104, C112, C113, C114)

Interchangeability

23901-C15-01

23901-C16-01

23900-C17

23900-0-C18-01

23900-0-C22-0101

23900-C25

23901-0-C26

23900-C30

23900-C31

23901-C34-0l

23900-C40

23900-C51

23900-C53

23901-C54

23900-C57

23900-C59

23900-C61

23900-C63

23900-C64

23901-C65-C1

23900-0-C69

23900-C72

23900-C73

23900-C75

23901-C78

23900-C79

23900-C80

23900-C81

23900-0-C101

23900-0-C102

23903 Page 25 of 32

Parts No.

Description

0-C105

0-C106

C107

C108

0-C109

C111

C116

C117

C124

C125

R lever assembly

(C105, C119)

Winding lever ratchet wheel assembly

(C106, C121, C122, C128)

Winding lever ratchet

Winding hook lever

Sprocket shaft assembly

(C109, C134, C135, C136)

Spring hook screw

Sprocket seat

R button

Winding hook coupler spring

Hook lever spring

C126

C127

0-C129

C130

C131

C132

R lever spring

Mirror charge lever spring

Shutter charge lever assembly

(C129, C115, C123)

Winding ratchet collar

Sprocket collar

Sprocket

C133 Sprocket spring

C139-01 Cover screw

C141-01 Winding ratchet spring

C144

C145

C146

0-C147

Seat plate retainer screw

Bottom release assembly

(C147, C148, C149, C150, C151, C152,

C153)

C202-01 Spool cam

C203

0-C204

C207

C210

C211

0-D6

Shutter charge collar

Winding ratchet spring

Friction ring

Spool assembly

(C204, C205 x 14, C206, C208)

Joint

Spool cam receptacle

Light seal washer

Rewind knob assembly

(D6, Dl, D2, D3, D4, D5,

CNM 1.4 x 2 x 2)

Rewinding shaft D7

0-D10

Rewinding shaft spring

Rewinding shaft bearing assembly

(D10, D8, D9)

Qty

23900-C202-01

23900-C203

23900-0-C204

23900-C207

23900-C210

23900-C211

23900-0-D6

23900-D7

23900-D8

23900-0-D10

Interchangeability

23900-0-C105

23900-0-C106

23900-C107

23900-C108

23900-0-C109

23900-C111

23900-C116

23900-C117

23900-C124

23900-C125

23900-C126

23900-C127

23900-0-C129

23900-C130

23900-C131

23900-C132

23900-C133

23900-C139-01

23900-C141-01

23900-C144

23900-C145

23900-C146

23900-0-C147

23903 Page 26 of 32

Parts No.

Description Qty

M10

M14

M16

M18

M19

O-D11-01 ASA dial assembly

(D11-01, D12, D13, D14 x 3, D16, D17,

D18 x 3, D19, D23, T-CNS 1.4 x 2.5 x 2)

D15

0-E000

Nut

D21-00A Washer a (t=0.1mm)

-00B " b (t=0.15mm)

-00C " c (t=0.2mm)

Shutter block

0-1-1000 Self-timer

I 1 P.C. board retainer

I 8

I 9

I 10

I 19

I 20

Winder switch contact

Insulation plate

Collar

Lug plate

Insulation seal

I 100

I 200

I 300

K101

0-K102

K109

0-L4

0-M2

Connector

Main switch

Memory and magnet switch block f-volume 1

Diaphragm coupler ring assembly

(K102, K103 x 2, K104, K105 x 2, K106,

K107, K108 x 2)

Insulation seat 1

Mirror

Fresnel lens

Penta prism

Eyepiece assembly

(L4, L5)

Focusing screw receptacle plate

Prism seat assembly

(M2, M4, M9 x 2, M10, M14, M16)

Focusing plate retainer

Finder mask

Fresnel lens frame

Supporter plate, right

Supporter plate, left

Prism protection sheet

Shutter speed scale indication plate

Spacer

Light seal

Fresnel lens retainer plate

Dust prevention seal A

Interchangeability

23900-D15

23900-D21-00A

23900-D21-00B

23900-D21-00C

23900-0-K000

23901-I 1

23901-I 19

23900-I 300

23900-K101

23900-0-K102

23900-K109

23900-L1

23900-L3

23900-0-L4

23900-M1

23900-M3

23900-M8

23900-M14

23900-M16

23900-MI8

23900-M19

23903 Page 27 of 32

Parts No.

M20

N13

R100

T100

T108

T210

T212

Description

Dust prevention seal B

Cell frame

Light metering lens

Shoe contact piece A

Eyepiece protector

Insulation collar

Shoe contact piece C

Insulation plate

ASA volume assembly

P.C. board assembly

P.C. board retainer

Dust prevention seal

LED retainer collar

Qty

Interchangeability

23900-M20

23900-N3

23900-N7

23901-N8

23901-N13

23900-T108

23900-T210

23903 Page 28 of 32

Product No. 23903

PENTAX ME Super

Small Screws:

Description

CSS 1.7 x 2.2

Surface Treatment

Black nickel

CSS 1.7 x 2.2

CSS 1.7 x 2.5

CSS 1.7 x 3

Nickel

Black nickel

" "

CSS 1.7 x 3

CSS 1.7 x 4

CNS 1.4 x 1.5

CNS 1.4 x 2

CNS 1.4 x 4.5

CNS 1.7 x 1.8

CNS 1.7 x 2

CNS 1.7 x 2.5

Nickel

Black nickel

" "

CNS 1.7 x 3

CNS 1.7 x5

CNS 2 x 2.5

CNM 1.7 x 2.2

CNM 1.7 x 2.8

CNM 1.7 x 3

" "

CNM 1.7 x 3.5

CNL-D 1.4x 2

CNL-D 1.4 x 3

CNL-D 1.4 x 3.5

CNL-D 1.7 x 2

" "

Position of Use

0-B000, B5

0-B000, M6

0-B000, M7

A1, A400

0-B000, B4

A1, A4

A1, A10

A1, 0-A39

A1, 0-C1

A1, 0-C102

A1, A400

A300, A322

A500, Q-A513

0-C2-02, C17

0-C2-02, I200

0-M2, M6

0-M2, M7

A100, K101

A100, 0-A129

A100, A133

0-B000, I10

0-B000, 0-M2

0-B000, M6

C40, 0-C109

A1, 0-C102

0-B000, 0-B98

A1, 0-A6

A100, A134

A1, 0-A21

A1, 0-C147

A1, 0-A11

A1, A13

0-B000, B71

A100, 0-H000

0-C26, C72

A1, A45

A1, A504

T100, T212

0-B000, B207

0-B000, 1100

23903

Qty

Page 29 of 32

Description

CNL-D 1.7 x 2.5

CNL-D 1.7 x 3

W13

W14

W17

W27

W28

W30

W31

W36

W40

W70

W89

Surface Treatment

Black nickel

" "

CNL-D 1.7 x 3

CNL-F 1.7 x 2.5

T-CSS 1.7 x 2.5

T-CNS 1.7 x 3

T-CNM 1.7 x 4

T-CNL-E 1.7 x 3

T-CNL-E 1.7 x 4

Set T 1.7 x 4

Washers:

Description Material

Brass

Delrin

Brass

Black zinc

Black nickel

" "

Steel

Brass

Position of Use

Al, 0-C2-02

Al, R100

A1, I 1

A1, M6

A1, 0-E000

N1, M6

N1, M7

A1, 0-E000

0-B000, B24

0-C1, C31

0-A307, A316

A1, A335

A300, A321

N1, N9

N1, N8

0-M2

Thickness

0.5mm

0.3

0.5

0.03, 0.05, 0.1

0.1, 0.15

0.2

0.08, 0.1, 0.15

0.1

0.1, 0.15

0.1, 0.2, 0.3, 0.4

0.1

0.05, 0.1, 0.15

0.15, 0.2, 0.3

0.3

0.1

0.1, 0.2

0.05, 0.07, 0.1

0.2

0.5

0.2

0.5

Position of Use

0-B000, B4

0-A129

A1, 0-A139

0-A126, A127

B38, 0-B40

A100, A134

C16-01

0-C26

A500, A507

0-C1

A1, A100

A1, M6

A1, M7

0-C106, C144

C108, Cl30

0-C101

0-B90

0-C109, C132

A100, A123

0-B25

0-C18-01

B93, B95

A3, A4

B38, 0-B40

0-B16

C24

Qty

23903 Page 30 of 32

Description Material

W91

W96

Lock Washers:

Description Material

LW10 Steel

LW13 "

LW17 "

LW20

Lead wires:

Lead wire No.

Length

125

105

2.0

125

105

125

120

136mm

125

Thickness Position of Use

0.05, 0.07, 0.1, 0.15 C25

0.3

A321

Qty

Position of use

B203

0-C26

B27

C16-01

0-C18-01

0-C101

0-C109

0-B7

0-B40

0-B90

0-B30

Qty

Color

Blue

Brown

Orange

Black

Purple

Green

Purple

Skyblue

Gray

White

Pink

Yellow

Purple

Brown

Black

Blue

White

Pink

Red

Gray

Pink

Yellow

23903

Position of use

I100, 0-A129

I100, I300

I100, I19

I100, I300

I100, 0-A129

I100, A44

I100, 0-A129

I100; 0-A129

I100, 0-A129

I100, K101

I100, I300

0-A129, 0-E000

0-E000

T100, 0-E000

0-A129, 0-E000

I200, 0-A129

I200, T100

N4, 0-A126

N4, T100

R100, T100

Qty

Page 31 of 32

Lead wire No.

Length

110

Color

Yellow

Red

Blue

Red

Green

Position of use

R100, K101

T100, 0-A11

I100, 0-A21

I8, 0-A21

Qty

23903 Page 32 of 32

হ্যালো! আমি একটি এআই চ্যাটবট যা বিশেষভাবে Pentax ME Super Camera Návod k obsluze এর সাথে আপনাকে সহায়তা করার জন্য প্রশিক্ষিত। আমি পুঙ্খানুপুঙ্খভাবে নথিটি পর্যালোচনা করেছি এবং আপনার প্রয়োজনীয় সঠিক তথ্য সনাক্ত করতে বা স্পষ্ট এবং সহজ শর্তে সামগ্রী ব্যাখ্যা করতে সহায়তা করতে পারি। আপনি নির্দিষ্ট বৈশিষ্ট্য, সমস্যা সমাধানের পদক্ষেপ বা সাধারণ ব্যবহার সম্পর্কে নির্দেশিকা খুঁজছেন কিনা, নির্দ্বিধায় আপনার প্রশ্ন জিজ্ঞাসা করুন। আপনার উদ্বেগ বা চাহিদা সম্পর্কে আপনি যত বেশি বিবরণ দেবেন, আমি তত বেশি নির্ভুলভাবে এবং কার্যকরভাবে আপনাকে সহায়তা করতে পারি!

সহকারী টাইপ করছে

সহকারী কীবোর্ডের বাইরে। অনুগ্রহ করে পরে আবার চেষ্টা করুন।

মনে হচ্ছে আপনি এমন একটি নথিতে পৌঁছেছেন যা একাধিক ভাষায় লেখা, যার মধ্যে একটি আপনার মাতৃভাষা নয়। আপনি আপনার পছন্দের ভাষা ছাড়া অন্য ভাষার পৃষ্ঠাগুলি সাময়িকভাবে লুকাতে নিম্নলিখিত লিঙ্কগুলি ব্যবহার করতে পারেন।