ATTO FibreBridge

™

1180D

Easily Integrated Fibre Channel-to-SCSI Bridge

The ATTO FibreBridge™ 1180D is a desktop Fibre Channel-to-SCSI bridge featuring one (1) Fibre Channel port with a 1-Gigabit DB9 copper connector and one (1) Ultra2 SCSI port. It provides a cost-effective connectivity solution that can be easily integrated with

SCSI devices for direct connection into a

Fibre Channel Storage Area Network (SAN).

TECHNICAL

HIGHLIGHTS

• One 1-Gigabit Fibre Channel

port by one independent Ultra2

ATTO’s intelligent Bridging Architecture™ offers a unique combination of features that gives manufacturers the ability to embed customized value into their products.

• 80 MB/sec. maximum throughput

• Support for SNIA Extended Copy

• RS-232 and Fibre Channel In-band

confi guration, monitoring and

management

• Full support for direct connect to

F-port fabric switches

• Stackable desktop enclosure

attotech.com

155 CrossPoint Parkway • Amherst, NY 14068 • 716.691.1999

ATTO FibreBridge

™

1180D

Fibre Channel and SCSI

Fibre Channel Interface:

• 1-Gigabit (200 MB/sec. in full-duplex mode)

• One (1) copper DB9 port

• Full support for direct connect to

Environmental and Physical

Characteristics

Dimensions:

• 7.50” W

• 10.00” L

• 2.03” H

• Class 2, Class 3 ANSI Fibre Channel

specifi cations

• PLDA, public loop login (NL_ports) and

fabric direct connect (N_port)

• Full-duplex transmissions

Operating Environment:

• Temperature: 0 - 40º C

• Humidity: 0-90% non-condensing

SCSI Interface:

• One (1) 68-pin SCSI connector

• LVD Ultra2 SCSI - 80 MB/sec. max.

• Backward compatible with all Single-

Power:

• Input: 100/240 VAC (automatic)

• Rated: 90 – 132 VAC; 175 – 264 VAC,

47 – 63 Hz, single phase

• 128 LUNs per channel

Performance:

• Up to 3,500 I/Os per sec.

• 80 MB/sec. maximum data-transfer rate

• Up to 72 MB/sec. sustained

Fibre Channel Port

Confi guration:

• Desktop

Airfl ow:

• Internal fan provides 10 CFM

• Ambient air not to exceed 40º C

Other

Operating Systems Supported:

• Operating system independent

Agency Certifi cations:

• FCC Class A

• CE (EN55022/EN55024)

• CSA / EN60950

Figure 1: Rear Panel

SCSI Activity

LED

RS-232

(Serial) Port

Fibre Channel Compliance:

• ANSI FC-AL

• SNIA Extended Copy

• Class 2, Class 3

Management

Device Management Physical Interface:

• In-band (through Fibre Channel)

• Serial through RS-232 port

Device Management User Interface:

• Command Line Interface (CLI)

• ATTO BridgeTools™ Java-based application

LEDs:

• Power

• Ready

• FC activity

• SCSI bus activity

SCSI Port Power

LED

FC Activity

LED

Power

Switch

Power

Connector

F i b r e C h a n n e l

©2005 ATTO Technology, Inc. Specifi cations subject to change without notice. Rev 9/05