Behringer Europack UB1202 Specification Sheet

Technical Specifications

EURORACK UB1202

Ultra-Low Noise Design 12-Input 2-Bus Mic/Line Mixer

2 EURORACK UB1202 Technical Specifications

EURORACK UB1202

Ultra-Low Noise Design 12-Input 2-Bus Mic/Line Mixer

Ultra-low noise design, highest possible headroom, ultra-transparent audio

4 state-of-the-art, studio-grade IMP "Invisible" Mic Preamps with 130 dB dynamic range for 24-bit, 192 kHz sampling rate inputs

Effective, ultra-musical 3-band EQ plus switchable low-cut filter on all mono channels

12 balanced high-headroom line inputs with +4/-10 level selection on all stereo channels

One post fader FX send per channel for external FX devices

Clip LEDs on all mono channels

Main mix outputs plus separate control room, headphone and 2-track outputs

2-track inputs assignable to main mix or control room/headphone outputs

FX to control room function helps to monitor effect signal via headphone and control room outputs

Switchable +48 V phantom power for condenser microphones

External power supply for noise-free audio and superior transient response

High-quality components and exceptionally rugged construction ensure long life

Conceived and designed by BEHRINGER Germany

Specifications

Mono Inputs

Microphone Inputs (IMP “Invisible” Mic Preamp)

Type XLR connector, electronically balanced, discrete input circuit

Mic E.I.N.

1

(20 Hz - 20 kHz)

@ 0 Ω source resistance

@ 50 Ω source resistance

-134 dB / 135.7 dB A-weighted

-131 dB / 133.3 dB A-weighted

@ 150 Ω source resistance

Frequency Response

<10 Hz - 150 kHz

<10 Hz - 200 kHz

-129 dB / 130.5 dB A-weighted

Gain range

Max. input level

Impedance

Signal-to-noise ratio

Distortion (THD + N)

-1 dB

-3 dB

+10 dB to +60 dB

+12 dBu @ +10 dB GAIN approx. 2.6 kΩ balanced

110 dB / 112 dB A-weighted

(0 dBu In @ +22 dB GAIN)

0.005% / 0.004% A-weighted

Line Input

Type

Impedance

¼" TRS jack, electronically balanced approx. 20 kΩ balanced, approx. 10 kΩ unbalanced

-10 dB to +40 dB Gain range

Max. input level +22 dBu @ 0 dB GAIN

Fade-Out Attenuation

2

(Crosstalk Attenuation)

Main fader closed

Channel muted

90 dB

89.5 dB

Channel fader muted

Frequency Response (Mic In Main Out)

89 dB

<10 Hz - 90 kHz

<10 Hz - 160 kHz

+0 dB / -1 dB

+0 dB / -3 dB

Stereo Inputs

Type

Impedance

Max. input level

¼" TRS jack, electronically balanced approx. 20 kΩ

+22 dBu

3 EURORACK UB1202 Technical Specifications

Equalizer

EQ Mono Channels

LOW

MID

HIGH

EQ Stereo Channels

LOW

MID

HIGH

Send / Return

Aux Sends

Type

Impedance

Max. output level

Stereo Aux Returns

Type

Impedance

80 Hz / ±15 dB

2.5 kHz / ±15 dB

12 kHz / ±15 dB

80 Hz / ±15 dB

2.5 kHz / ±15 dB

12 kHz / ±15 dB

¼" TS jack, unbalanced approx. 120 Ω

+22 dBu

¼" TRS jack, electronically balanced approx. 20 kΩ balanced / approx. 10 kΩ unbalanced

+22 dBu Max. input level

Outputs

Main Outputs

Type

Impedance

Max. output level

Control Room Outputs

Type

Impedance

Max. output level

Headphones Output

¼" TRS jack, unbalanced approx. 120 Ω unbalanced

+22 dBu

¼" TS jack, unbalanced approx. 120 Ω

+22 dBu

Type

Max. output level

Main Mix System Data 3 (Noise)

Main mix @ -∞, channel fader @ -∞

Main mix @ 0 dB, channel fader @ -∞

Main mix @ 0 dB, channel fader @ 0 dB

Power Supply

Power Consumption

Mains Voltage

USA/Canada

U.K./Australia

Europe

Japan

Physical / Weight

¼" TRS jack, unbalanced

+19 dBu / 150 Ω (+25 dBm)

-106 dB / -109 dB A-weighted

-95 dB / -98 dB A-weighted

-84 dB / -87 dB A-weighted

23 W

120 V~, 60 Hz, MXUL5 adapter

240 V~, 50 Hz, MXUK5 adapter

230 V~, 50 Hz, MXEU5 adapter

100 V~, 60 Hz, MXJP5 adapter

Dimensions (H x W x D) approx. 1 5/6 x 8 2/3 x 9 1/2" approx. 47 x 220 x 242 mm approx. 4.73 lbs / 2.15 kg Weight (net)

1 Equivalent Input Noise

2 Measuring conditions: 1 kHz rel. to 0 dBu; 20 Hz - 20 kHz; line input; main output; unity gain.

3 20 Hz - 20 kHz; measured at main output. Channels 1 - 4 unity gain; EQ flat; all channels on main mix; channels ¹⁄₃ as far left as possible; channels ²⁄₄ as far right as possible; reference = +6 dBu.

BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.

TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE MUSIC GROUP (MUSIC-GROUP.COM). ALL TRADEMARKS ARE THE PROPERTY OF THEIR

RESPECTIVE OWNERS. MUSIC GROUP ACCEPTS NO LIABILITY FOR ANY LOSS WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN. COLORS AND

SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS ONLY. FULLFILLERS AND RESELLERS ARE NOT AGENTS OF MUSIC GROUP AND HAVE ABSOLUTELY NO

AUTHORITY TO BIND MUSIC GROUP BY ANY EXPRESS OR IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR

MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS WRITTEN PERMISSION OF MUSIC GROUP IP LTD. ALL RIGHTS RESERVED. © 2012 MUSIC GROUP IP LTD. TRIDENT CHAMBERS,

WICKHAMS CAY, P.O. BOX 146, ROAD TOWN, TORTOLA, BRITISH VIRGIN ISLANDS