Belkin Bulldog Plus UPS Shutdown Management Software Uživatelská příručka
Belkin Bulldog Plus - comprehensive power management tool for your UPS. Monitor your UPS, set up automatic shutdowns, receive notifications about power events, and even manage your UPS remotely.
With Bulldog Plus, you can:
- Protect your equipment from power problems: Bulldog Plus monitors your UPS and takes action to protect your equipment from power outages, surges, and other power problems.
- Automate your UPS: Bulldog Plus can be programmed to automatically shut down your computer, turn off your UPS, or send you notifications when certain power events occur.
- Monitor your UPS remotely: Bulldog Plus can be accessed remotely using a web browser, so you can monitor your UPS from anywhere, anytime.
Iklan
Iklan
Belkin Bulldog Plus
Shutdown Management Software for Windows
User’s Manual
Table of Contents
BULLDOG PLUS INSTALLATION .................................................................5
BULLDOG PLUS SERVICE ............................................................................7
BULLDOG PLUS MONITOR...........................................................................9
Remote Monitoring and Control: .............................................................11
Remote Monitoring and Control: Using Internet Browser........................12
BULLDOG PLUS MONITOR OPERATIONS ................................................14
Bulldog Monitor Main Menu ....................................................................15
Configuration Window.............................................................................19
Modem.................................................................... 錯誤! 尚未定義書籤。
Notification Users -- Pager List ...............................................................21
Notification Users -- e-mail......................................................................21
Notifify Users -- Network Broadcast........................................................21
Log Management:...................................................................................24
Action - Shutdown: ..........................................................................26
Belkin Components 2
Action - Logging:..............................................................................26
Action - Broadcasting: .....................................................................27
Action - Paging: ...............................................................................27
Action- Command: ...........................................................................27
Action - Alarm: .................................................................................27
Action - e-mail:.................................................................................27
Action - SNMP Trap:........................................................................27
Action - Receptacle Control: ............................................................28
ADVANCED UPS PROPERTY......................................................................29
Choose Master/Slave .............................................................................30
SNMP Trap Number: .......................................................................33
Turn Receptacle Relay On......................................................................36
Turn Receptacle Relay Off......................................................................36
UPS Audible Alarm On ...........................................................................36
UPS Audible Alarm Off ...........................................................................36
BOTTOM LAYER BUTTONS ........................................................................41
Belkin Components 3
SERVICE AND SUPPORT ............................................................................43
Belkin Components 4
Introduction
Congratulations on your purchase of Bulldog Plus to manage your
Uninterruptible Power Supply (UPS). Bulldog Plus is designed to provide end users the ability to take proactive steps to protect their equipment from power related damages. Bulldog Plus allows for automatic shutdowns, scheduled shutdowns and a variety of other features that help you manage your system and its peripheral components.
Bulldog Plus provides detailed information about the UPS and its protected equipment. It is easy to install and program, yet has the necessary features to handle all of one’s power requirements. Included is the capability for network management protocol (SNMP). Bulldog Plus will disseminate UPS information into SNMP protocol and project it to the appropriate Network
Management Station (NMS), such as HP OpenView. To make use of resources on the Internet, Bulldog Plus also supports HTTP protocol. This enables end-users to monitor their UPS anywhere, anytime, by simply utilizing their web browser.
Bulldog Plus runs in the background as a Windows service, and communicates with the UPS in order to ensure that your computer and attached components are protected from any power problems.
Bulldog Plus features:
1.Graceful operating system shutdown
2.Scheduled tests, shutdown/restarts of the UPS, turn on/off receptacles
3.Flexible events
4.Notification: Pager, e-mail and audible alarm, network broadcasting and
SNMP
5.Real-time values of voltage, current, frequency and loading...
6.Historical data & graph
7.Network monitoring
8.Multi-computer shutdown/restart
9.Support Simple Network Management Protocol (SNMP)
11.Support HTTP, remote monitor and control using Internet browser
12.Support Universal Serial Bus (USB)
13.Multi-lingual menus
Belkin Components 5
Bulldog Plus Installation
Please note that the USB communication is not supported by Windows
95 and NT4.0.
Bulldog Plus Setup:
1. Turn off your computer.
2. Attach the electrical power cable from the computer to the UPS.
3. Attach the electrical power cable from the UPS to an AC power outlet.
4. Plug the communication cable into the UPS, then plug the other end of the cable into the communication port on your computer.
5. Start your computer.
6. Check the communication type of your UPS. If you select the USB option you must have connected the UPS to the computer and install the
HID driver.
7. Place the Bulldog CD in your CD-ROM device and execute the setup.exe to run the setup program.
8. During the installation, the following dialog gives you 3 options:
• Program File: Files contain Bulldog Service, Bulldog Monitor and this on-line help.
• Audio Files: Some .wav files. These files will be played to notify you when power event occurs.
• SNMP Files: Bulldog Plus SNMP DLL file.
9. After finishing the installation, the setup process will create a Bulldog
Plus association.
10. The Bulldog Plus software is comprised of two modules:
• An UPS Monitoring Module (Bulldog Service), which runs in the background as a Windows Service and communicates to the UPS.
• An User Interface Module (Bulldog Monitor), which enables you to control and configure Bulldog Plus through the drop down menus and dialog boxes. It also allows you to monitor the UPS through the
Main Screen.
Uninstall: To remove Bulldog Plus from your hard disk.
Help: Bulldog Plus on-line help.
Bulldog Monitor: User interface, used to monitor and configure your UPS.
Bulldog Status: Reflect the status of Bulldog Plus service program, the service is used to communicate with your UPS.
Belkin Components 6
Bulldog Plus Service
Belkin Bulldog Service runs in the background as a Windows Service when the system initiates. You can also run Bulldog Service manually by selecting the Start Menu- Program Files - Belkin Bulldog - Bulldog Service. Once
Bulldog Service starts there is a Bulldog Service icon located on the system tray to indicate UPS status
.
1. Normal
2. UPS Disconnect, cannot get any information from UPS.
3. Power Failed! The UPS is operating on battery power.
4. UPS Bypass Active!
Moving your mouse over the Bulldog Plus icon in the system tray and click the right button to pop up the following menu
• Show Countdown: Belkin Bulldog displays the countdown time (time to shutdown/suspend the operating system) window to remind the user that the operating system will shutdown or suspend in the displayed time. This function lets the user know clearly how much time is left to shutdown/suspend the computer when power fails. The operating system shutdown time can be adjusted from the Action menu
Belkin Components 7
• Monitor: Run the Bulldog Plus user interface.
• Configuration: Displays the configuration window, allows you to change the UPS parameters.
• Meters: Shows UPS real-time meters.
• Program Stop: If this item marked Bulldog Plus stopped. Unmark it and the program will resume.
Once a power event has occurred, Bulldog Plus will pop up a broadcast dialog box to inform user what happened to UPS.
Belkin Components 8
Bulldog Plus Monitor
Bulldog Monitor enables you to control and configure Bulldog Plus through drop down menus and dialog boxes. It also allows you to monitor the UPS through the Main Screen. It is not necessary for Bulldog Monitor to reside in your computer’s memory, the execution depends on the user's requirement.
This can save precious system resources.
After finishing the Bulldog Plus installation, Bulldog Service automatically loads into memory and runs once the Windows operating system starts up.
There is a Bulldog Plus icon that lies in the system tray to indicate current
UPS status.
To run the Bulldog Monitor, moves the mouse cursor over the Bulldog Plus icon and double-click to launch Bulldog Monitor, or click the right button to pop up the menu:
Then select Monitor to run the program. You can also launch Bulldog Monitor without running Bulldog Service, select Bulldog Monitor from Program Files -
Bulldog Plus menu.
Belkin Components 9
Bulldog Monitor Main Screen:
Belkin Components 10
Networking
BULLDOG Plus software is comprised of two modules: BULLDOG Service and BULLDOG Monitor. You may run both the programs in a computer to monitor your localized UPS or run the programs in two different computers.
Operation Mode:
BULLDOG Service can operate in "Master" Mode (which allows
BULLDOG to send commands to its connected UPS) in "Serial Slave" mode (which listens to its connected UPS) or in "Networking Slave" mode
(which obtains the UPS information from Master via the network). If two or more computers are communicating with a single UPS, only one of these computers should be in Master mode; the others should be in Slave mode to prevent them from sending contradictory commands.
When a power event occurs, the Master gets the information then transmits it to Salve(s). Each BULLDOG Service executes different
"Actions"(FlexEvent) so that the system manager can configure different strategies into each different computer. For example: When a power failure occurs, the file server and mail server won't shutdown until the UPS battery is low, but other less important workstations execute shutdown after 5 minutes, and the initial workstations shutdown after 10 minutes.
Shutting down workstations preserves more battery power for your mission critical network servers.
Remote Monitoring and Control:
Bulldog Monitor has the ability to monitor Local hosts and Remote hosts.
Belkin Components 11
You can run only Bulldog Monitor without running Bulldog Service. Bulldog
Monitor will search hosts in the LAN(Local Area Network) which runs
Bulldog Service in the combo box. Click on the Host Selection combo box to list the searched hosts in the LAN. Select one, then Bulldog Monitor will connect to the selected host.
If the host is located on the Internet, you can also input the remote host IP address from the View Menu- Remote Hosts menu shows the hosts you can establish connections with.
Remote Monitoring and Control: Using Internet Browser.
Another way to remote monitor Bulldog Service is by using the Internet
Browser. Launch the Microsoft Internet Explorer or Netscape
Belkin Components 12
Communicator, type the IP address in the URL and press enter. You will then be able to see the UPS information. You can change the network port number to prevent conflict with other WEB server programs. If the port number isn't 80 you have to type URL like this: http://172.16.176.141:2000 where 2000 is the port number you assigned.
Belkin Components 13
Bulldog Plus Monitor Operations
The Main Screen has 7 areas that present information on the operating status of your UPS. These areas are discussed in the following sections.
Host Selection: Press the combo box to select hosts that runs Bulldog Plus in the LAN. Users can monitor or control the UPS remotely (password is needed).
Connection Indication: The logo will rotate while the communication between Bulldog Monitor and Bulldog Service is established.
Information Display: Press Bottom Layer Buttons to change the information that is displayed in this area.
Recent Event Log: Preserve last 10 event logs in the combo box, click on the combo box to pull down and view the logs.
Top Layer Buttons
These buttons are used to increase the speed of your operation, refer to the dialog boxes in the menu.
Configuration: Same as the System-> Configuration in the menu.
Meters: Same as the View-> Meters in the menu.
Belkin Components 14
Event Log: Same as the View-> Event Log in the menu.
History Graph: Same as the View-> History Graph in the menu.
Bulldog Monitor Main Menu
The Main Screen has a menu bar at the top with 5 main options: o o computer parameters.
Control: This menu allows you to set UPS buzzer, outlet, and test.
System: This menu allows you to set the Bulldog Plus and o
View: The View menu allows you to see the real-time values and history event or history data. o
Wizard: Directs users to configure the most frequent use of settings, the wizard guides users step-by-step to finish their o configuration.
Help: The Help menu allows you to access the online help system.
Belkin Components 15
System
The system menu allows you to configure the UPS and the monitoring screen parameters. When you select the System menu from Main Menu bar, a drop down menu appears offering you the following menu options:
Login: Used for Remote Monitor. User must enter the password verification before he can control or configure the UPS.
Configuration: The Configuration menu allows you to tailor various Bulldog
Plus parameters.
Monitor Screen: Allows you to change displayed item in the Scroll Screen of
Information Display Area.
Font: Sets the font size. Bulldog Plus will resize the window automatically.
Window: This menu allows you to change the displayed items in the
Information Display Area. The items in the menu refer to each button in the
Bottom Layer Buttons.
Close Monitor: Stops Bulldog Monitor.
Login
When attempting to use Bulldog Monitor as a Remote Monitor (connect to different host) you have to enter the password for verification if you want to do such tasks as configurations, or to control the UPS.
Otherwise, you can only view the UPS information.
If user runs Bulldog Service and Bulldog Monitor on the same computer, you can perform such configurations or control the UPS without the
Belkin Components 16
password.
To change your password, please choose the Set Password option from
Configure - Network menu
Monitor Screen
This dialog box allows you to change displayed items in the Scroll screen of the Information Display Area
Language: Choose a language that suits your operating system needs.
Program will automatically replace the on-line help file and audio files to your selected preferences.
Meters: Press the Main button from the Bottom Layer Buttons, and you will see that there are two meters in the information area. You can change the displayed items of the two meters.
Scroll Window: Press the Scroll button from the Bottom Layer Buttons, and the scroll window will display the information in this area. This item
Font allows you to change the display menu and its items.
This menu allows you to change the font size of Bulldog Monitor window.
Window
This menu allows you to change the display items in the Information
Display Area. The items in the menu refer to each button in the Bottom
Layer Buttons.
Belkin Components 17
Close Monitor
Close Bulldog Monitor and leave Bulldog Service running.
Belkin Components 18
Configuration
The Configuration Screen has a menu bar at the top with three main options:
Devices: This menu allows you to configure the modem, pager and e-mail applications.
UPS: The UPS menu allows you to plan and set the UPS schedule or perform the Action...
Network: This menu allows you to choose the Master/Slave settings or configure SNMP, HTTP functions.
Configuration Window
UPS Communication Port: COM1, ... COM4, USB.
Next UPS Test Date/Time: The date of the next user-initiated UPS self test.
Setting from System->Configuration->UPS->Schedule.
Next UPS Shutdown Date/Time: This field displays the date of the next shutdown the computer and UPS. Setting from
System->Configuration->UPS->Schedule.
Next UPS Restart Date/Time: The date of the next restart UPS. Setting from
System->Configuration->UPS->Schedule.
Local Host IP: IP address of a computer, which runs Bulldog Monitor.
Belkin Components 19
Bulldog Service Mode: Bulldog Service acts as a Master or Slave.
Remote Host IP: The host, which runs Bulldog Service. If Bulldog Monitor and
Bulldog Service runs on the same computer and this field will be empty.
Belkin Components 20
Devices
Notification Users -- Pager List
Program will set the modem to notify all via the pager numbers, which are listed in the pager list. You can input your pager number for your own notification purposes. For example: 060123456 is your pager number, each ',' tells modem to delay 2 seconds, delay time is for setting waiting period for the response signal, before proceeding to transmit to the displayed number 119. 119 will appear in your pager LCD.
To trigger the pager notification you must enable the Pager Action in the
Action dialog box. a. Add: Add a new pager number. b. Modify: Modify the selected pager number. c. Delete: Delete the selected pager number.
Notification Users -- e-mail
You can also e-mail users through SMTP when power events occur.
To trigger the e-mail notification you must enable the e-mail Action in the
Action dialog box. a. Add: Add a new user. b. Modify: Modify the selected user name. c. Delete: Delete the selected user.
Notifify Users -- Network Broadcast
You can also broadcast information to users when a power event has occurred. The broadcast function is associated with Windows Messenger service.
To trigger the broadcasting notification you must enable the Broadcast
Action in the Action dialog box. a. Domain: Enable this item to broadcast to all the users in the domain, otherwise Bulldog Plus will send messages to the hosts that users assign. b. Add: Add a new machine name. c. Modify: Modify the selected machine name. d. Delete: Delete the selected name.
Color
Used to change the screen color.
Belkin Components 21
a. Color Items: This area lets you select an item, which you want to change the color for. The right-top corner will display the current selected color. b. Change: Change the color you have selected. c. Default: Default setting. d. Exit: Close the dialog box.
Close
Close the Configuration window.
Belkin Components 22
UPS
UPS Property
This dialog box allows you to configure the UPS COM port, battery replacement date, ... etc. Load Warning and Load Severity used to prevent UPS overload (see the UPS hardware user manual). In general,
Load Warning will notify the user to reduce the UPS load, Load Severity will shutdown the computer to prevent overload. a. COM Port: COM1, ...COM4, USB. b. Load Warning: Load warning. c. Load Severity: User must reduce UPS load. d. Last Battery Replacement Date: Records the last battery replacement date. e. Next Battery Replacement Date: Displays the date of the next battery replacement, Bulldog Plus will notify the user to replace the battery. f. Host Name: Local host name.
Attached Devices
Allows the user to assign the attached device a name. When you're controlling the outlet, Bulldog Plus will let you know which devices you are controlling. a. Select an Outlet Group: Assigns an outlet group. Please look at the back panel carefully, some outlets may share one control relay, these outlets are called an outlet group. If you turn off the outlet group (for example: outlet1 and outlet2) then the UPS will stop power to the outlet group outlet1and outlet2. b. Device Name: Assigns the attached devices a name, for example:
Outlet Group1 is called Monitor for association with the monitor and Outlet
Belkin Components 23
Group2 is called Computer for association with the CPU. These records can improve the efficiency of your management. Don't forget to press the Update button. c. Update: Updates your change.
Log Management:
(Please consider the free space in your hard disk) a. Maximum Event Log Entries: Always Bulldog Plus to preserve less than the assigned entries of event log. b. Data Log Interval: Time designated for automatic saving of a record of
UPS data. c. Maximum Data Log Storage: It allows you to save how many months
UPS data files you wish to keep.
Schedule
This function allows you to shutdown, restart, test and turn on/off outlets.
You can schedule up to 6 events. Settings are based on day, week or month and up to a period of 2 years.
Choose the applicable schedule to set whether it be for: a. One Time: This set schedule is applicable for a single day. b. Daily: This set schedule is applicable for every day c. Weekly: This set schedule is applicable for once a week period. d. Monthly: This set schedule is applicable for once a month period.
Belkin Components 24
Action
The action menu provides you with a list of events to choose from. The event and/or any combination of these actions can be selected from the
Choose Event list box. Actions that are already enabled will show a check mark. To delay the actions, set the desired time for delay in the Delay combo box.
Belkin Components 25
a. Enable Auto-Save: Bulldog Plus will save opened files and close applications automatically when you enable this function. b. Choose Event: When you select one item in the list the action buttons will display current settings. Press button to do further configurations. c. Set Default: Sets all the actions to default values. d. Delay: The power event must stay within the delay time to trigger actions.
Action - Shutdown:
Shutdown/Hibernate/Suspend the operating system or shutdown UPS. If you select the shutdown item Bulldog Plus will execute or ignore the
Auto-Save function depending on your selection in the Action dialog box.
But if you select the “suspend” or “hibernate” item, the program will ignore the Auto-Save function.
The action of “shutdown”, “hibernate” or “suspend” are the same as if you select the Shutdown Option from the Windows Start menu.
Action - Logging:
Allows you to log events as well as modify the default logging message.
You can see this message in the Event Log dialog box.
Belkin Components 26
Action - Broadcasting:
Permits you to broadcast an event based on a set period of time. If you want to be notified once, set the time period to "0". However, if you want to be notified more than once, set the time period to a larger number.
Each number corresponds to the number of times of notification.
Action - Paging:
Allows you to set the time period for paging intervals. If you want to be notified once, set the time period to "0". However, if you want to be notified more than once, set the time period to a larger number. Each number corresponds to the number of times of notification.
Action- Command:
Permits you to execute command files and set a period of time to delay its activation. To test this function, you can click the Test button. To enable or disable this action, mark the Enable Command check box.
Action - Alarm:
Permits you to send out audible alarm instead of a broadcast message.
There are two alarms to select from - Buzzer and Audio. If you choose
Audio, the Bulldog Plus requires a ".wav" file to emit the alarm. You can browse your system for other ".wav" files by clicking on the Browse button.
If you want to be notified once, set the time period to "0". However, if you want to be notified more than once, set the time period to a larger number.
Each number corresponds to the number of times of notification.
Action - e-mail:
Permits you to send e-mails through SMTP. If you want to be notified once, set the time period to "0". However if you want to be notified more than once, set the time period to a larger number. Each number corresponds to the number of times of notification. You can edit the user list by clicking the Edit list button, and add, modify or delete any user name in the list. To enable or disable this action, mark the Enable e-mail check box.
Action - SNMP Trap:
Lets you send a SNMP trap when the relative power event occurs. To enable or disable this action, mark the Enable SNMP Trap check box.
Belkin Components 27
You also need to specify the SNMP Trap target hosts and community string, please see the SNMP dialog box in the Network menu.
Action - Receptacle Control:
Allows you to control the Receptacle Relay on or off. Each Receptacle
Relay may control not only one outlet, please see the rear panel of your
UPS or the UPS hardware user's manual.
Stop All Action
Clicking on this, terminates all the actions immediately.
Voltage Sensitivity
Adjusts the UPS voltage sensitivity.
Transfer Voltage
Changes the low transfer voltage and high transfer voltage. This function lets your UPS adjust to the local power environment. a. Low Transfer Voltage: When utility power voltage drops lower than the assigned value the UPS will switch to backup mode. The output power is supplied from the battery. b. High Transfer Voltage: When utility power voltage rises higher than the assigned value, the UPS will switch to backup mode. The output power is supplied from the battery.
Belkin Components 28
Advanced UPS Property
If your UPS doesn't support this function, the item will be displayed as gray and the user cannot select this item.
Enable Wakeup Computer: If your computer architecture is compatible to ATX and the BIOS supports RS-232(RI) Wakeup function. You should enable this item to make the Schedule work correctly.
Enable Resume Computer: Be sure the BIOS supports RS-232(RI) Wakeup function. When Bulldog Plus suspends the computer and the UPS detects the change of power status, the UPS will resume the computer to its prior operating status and let Bulldog Plus notify users.
Enable Power Fail, Auto-Reboot: The time-line describes below,
If you enable this function, the UPS will reboot to restart the computer otherwise, it goes back to its normal state.
Enable Economic Mode: Switches to UPS economic mode.
UPS Periodic Auto-Test: Daily, weekly, biweekly and monthly. UPS starts the test procedure automatically when it reaches the test time.
Belkin Components 29
Network
Set Password
Sets the Bulldog Service password.
Choose Master/Slave
Please refer to the BULLDOG Service operation mode. If the computer connects to UPS directly (with RS-232 or USB) and can send commands to its connected UPS then the BULLDOG Service acts as a "Master". If it connects to UPS directly (with RS-232 or USB) but only listens to UPS then it is a "Serial Slave". If the computer is powered by the UPS, but obtains the UPS information from Master via TCP/IP network then it is a
"Networking Slave". When BULLDOG Service is a Networking Slave you must assign the Master IP address so that the Networking Slave can connect to the Master and obtain the UPS information. a. Master: Configures the BULLDOG Service to be a Master. b. Serial Slave: Configures the BULLDOG Service to be a Serial Slave. c. Networking Slave: Configures the BULLDOG Service to be a
Networking Slave. d. Master IP Address: When BULLDOG Service is a Networking Slave you must assign the Master IP address so that the Slave can connect to the Master host and obtain the UPS information.
Belkin Components 30
Wake On LAN
To wake up the remote host, Bulldog Plus sends notification through the network. You must provide the IP address and the network hardware address of the remote host. In Windows98, you can execute the
"ipconfig /All" command under the MS-DOS prompt to obtain the network cards physical address of the local host. Or, input the "arp -a" command to see the remote host’s physical address. Your network card must support the remote wakeup feature and this function should be enabled. a Bulldog Plus Resume The Computer From Suspend Mode: Bulldog
Plus will reinstate the computer into normal mode, and the program will awaken the remote hosts once the actions have been enabled. b. Each Time Bulldog Plus Startup: Program will wake up the remote hosts which are enabled when Bulldog Plus starts and is connected to the UPS.
Belkin Components 31
SNMP
If you are using a Windows 95/98/Me operating system, you can configure the SNMP parameters directly from the Bulldog Plus:
Select the Accept SNMP packet from any hosts, Bulldog Plus will accept all the requested commands and set commands. When you select the
Accept SNMP packet from the following hosts, Bulldog Plus receives information only from the hosts that you assigned. Once a power event has occurred and the user enables the SNMP Trap in the Action dialog box, Bulldog Plus will send the SNMP trap to the hosts that are listed in the Trap Target list box. To add, modify or delete the host, click on its respective command button.
If you are using a Windows 2000/XP/2003 operating system, you must install the SNMP Service and configure the SNMP parameters from your operating system:
Bulldog Plus will ignore the values that were set in the SNMP dialog box.
To change the parameters of SNMP function, you should install the
SNMP Service in the Network option. Select the SNMP Service from the
Network option in the Control Panel and click the Property button to do your changes.
Belkin Components 32
SNMP Trap Number: dupsCommunicationLost 1
Description
SEVER: Communication with the UPS failed dupsPowerFail dupsPowerRestored dupsLowBattery dupsReturnFromLowBattery dupsLoadWarning dupsLoadSeverity dupsNoLongerLoadSeverity dupsLoadOnBypass dupsUPSFault dupsBatteryGroundFault
5
6
3
4
7
WARNING: Power failed! The UPS is operating on battery power
INFORMATION: Power restored! The utility power restored
SEVER: The UPS batteries are low and will soon be exhausted
INFORMATION: The UPS has returned from a low battery condition
INFORMATION: Loading percent of the UPS over the Load Warning value
9 Warning: Loading percent of the UPS over the Load Severity value
10 INFORMATION: Returned from Load Severity condition
11 WARNING: The UPS loads on bypass
13 SEVER: A general fault caused in the UPS
14 SEVER: The UPS battery ground fault dupsBatteryTestFail dupsFuseFailure dupsOutputOverload dupsOutputOverCurrent dupsInverterAbnormal dupsRectifierAbnormal dupsRectifierRecovered dupsReserveAbnormal
17 SEVER: The UPS test in progress
18 SEVER: The UPS fuse failed
20 SEVER: The UPS overload
22 SEVER: The UPS output is over current
24 SEVER: The UPS inverter is operating abnormally
26 SEVER: The UPS rectifier is operating abnormally
27 INFORMATION: The UPS recovered from abnormal state
28 SEVER: The UPS rectifier is operating abnormally dupsEnvOverTemperature
DupsNoLongerEnvOverTemperatu re
32 WARNING: The environment is over normal temperature
33 INFORMATION: The environment recovered from abnormal temperatures
Belkin Components 33
DupsEnvOverHumidity 34 The environment over normal humidity
HTTP
Bulldog Plus supports WEB Server for remote management and to obtain the UPS information. Users can use IE or Communicator to connect with Bulldog Service. Even your computer doesn't have Bulldog
Plus installed you can monitor and control your UPS via the network. a .Enable HTTP: Enable or disable the feature of Web service. b. HTTP Root: The HTTP root path. All the html and gif files will be located here. c. Port Number: The default port number is 80 but if there is already one
WEB server running you can change Bulldog Service HTTP port number to a different number. At the Internet Browser you can input http://172.16.176.141:2000 in the URL where 2000 is the assigned port number.
Belkin Components 34
Control
Shutdown Now
This command will execute the shutdown procedure at once. a. Restart: This function lets you restart the UPS automatically after being shutdown. To start the UPS for the next schedule, mark the
Restart check box. b. Shutdown OS and UPS: Use this function to shutdown both the OS and UPS. c. SHUTDOWN OS Only: Use this function to shutdown OS only. d. SUSPEND OS Only: Use this function to suspend your operating system. e. HIBERNATE OS Only: Use this function to hibernate your operating system.
Cancel Shutdown
This menu enables you to terminate the current shutdown procedure.
Belkin Components 35
Turn Receptacle Relay On
Turns the selected receptacle relay on. Each Receptacle Relay may control more than one outlet, please see the rear panel of your UPS or the UPS hardware user's manual. a. Select a Receptacle Relay: Selects a receptacle relay. b. Delay: Set the delay time to turn on the receptacle relay. c. On: Executes the stated command.
Turn Receptacle Relay Off
Turns the receptacle relay off. Each Receptacle Relay may control more than one outlet, please see the rear panel of your UPS or the UPS hardware user's manual. a. Select a Receptacle Relay: Selects a receptacle relay. b. Delay: Set the delay time to turn off the outlet group. c. Off: Executes the turn off command.
UPS Audible Alarm On
Enables the UPS buzzer. On the Bottom Layer Buttons press the Status button to get the UPS buzzer status.
UPS Audible Alarm Off
Mutes UPS buzzer alarm.
10 Seconds Test
UPS switches to backup mode and the output power is supplied by the battery for 10 seconds.
Deep Battery Test
UPS switches to backup mode and output power is supplied by the battery until the battery is low.
Cancel Test
This menu allows you to stop the test immediately.
Belkin Components 36
View
Meters
Bulldog Plus supports up to 12 meters of real-time values. Each meter has the ability to display all of the UPS values. Selecting different items from the Selection dialog box will display the selected item value. a. 2,4,6,8,12: Displays meter number. b. Selection: Assigns each meter to a different UPS item value. c. Close: Closes the meter window.
Event Log
This menu offers you the possibility of viewing past events.
Belkin Components 37
a. Print: Prints the event log. b. Exit: Closes event log dialog box.
History Graph
Clicking on the History Graph opens a dialog box that contains information about the UPS data in graphical format. This information is available only if there is an accumulation of data. You can select the month and year you want to view.
Belkin Components 38
a. Horizontal Scale: Selects the time scale. b. Vertical Scale: Selects the value scale. c. Select Month: Displays the UPS data for the month, which you want to see. d. Draw Item1(Blue): Displays the UPS item value by a blue line. e. Draw Item2(Red): Displays the UPS item value by a red line. f. Update: Updates the graph. g. Print: Exports the graph to a printer. h. Exit: Closes the history graph dialog box.
History Data
Clicking on the History Data opens a dialog box that contains information about UPS data in list format. This information is available only if there is an accumulation of data. You can select the month and year you want to view. a. Select Month: Displays the UPS data in the month, which you want to see. b. Update: Updates the list. c. Save As: Saves the data in the list format to the file that you assigned. d. Print: Exports the list data to a printer. e. Exit: Closes the history data dialog box.
Auto Save
When certain power events occur, Bulldog Plus will save open files and close applications before shutting down the operating system. If these saved files are untitled, Bulldog Plus will assign file names for them and
Belkin Components 39
put the files in temporary directory. This dialog box will tell you which files were saved by Bulldog Plus. a. Program Title: The application’s title name. b. Auto-Save File Name: Bulldog Plus names the file for you. c. Clear: Clear this record.
Remote Hosts
Detects the hosts, which are running the Bulldog Service in the LAN.
You can also type in the IP address and connect to the WAN. a. Search Result: The hosts will be listed in the Search Result list box.
Select the host you want to connect to and press the Connect button to establish the connection. b. Connects to this IP address: Bulldog Plus will connect to the IP address, which you type in. c. Connect: Establish the network connection.
Belkin Components 40
Bottom Layer Buttons
Each button shows the respective information in the Information Area
Main: General Information about the UPS.
Tree: There are 2 sub-trees in the Bulldog Plus tree: System and UPS. The system tree is for host information and the status of Master/Slave connection, the UPS tree is for all other UPS information.
Time: Displays the time for all schedules, battery replacement date and countdown time.
Status: UPS status.
Diagram: Indicates the UPS current flow.
Scroll: UPS data graph.
Outlet: Displays outlet status. (If your UPS cannot control the outlet then this button disappears)
Network: Indicates the connection of Master/Slave, Bulldog Monitor and
Bulldog Service.
Main
UPS Health: 3 levels: Green, yellow and red.
UPS Type: On line, off line, line interactive or 3 phase on line.
UPS Model: The UPS model, which is being monitored by Bulldog Plus.
Firmware Version: Indicating the version status of the UPS internal code.
Host Name: The host, which runs Bulldog Plus.
Rating VA: The UPS rating VA.
Rating Input Voltage: The UPS rating input voltage.
Rating Current: The UPS rating current.
Rating Battery Voltage: The UPS rating battery voltage.
Rating Input Frequency: The UPS rating input frequency.
Test Result: Results of the last self-test.
AC Source: Normal, battery or bypass.
Battery Status: The status of battery.
Battery Level: Percentage of battery level.
Loading: Output loading percentage.
Bulldog Plus with the ability to change the display item of the meters, the
Belkin Components 41
referred menu item: System-> Main Screen.
UPS Tree
System: System tree for host information and the connection of
Master/Slave.
UPS: UPS tree for all of the UPS information.
Time
Last Battery Replacement Date: To change the date of last battery replacement in the System-> Configuration UPS->UPS Property.
Next Battery Replacement Date: To change the date of next battery replacement in the System-> Configuration UPS->UPS Property.
Next 10 seconds Test Time: System-> Configuration UPS-> Schedule.
Next Deep Test Time: System-> Configuration UPS-> Schedule.
Next Shutdown UPS Time: system->Configuration UPS-> Schedule.
Next Restart UPS Time: System-> Configuration UPS-> Schedule.
Status
Shows all of the UPS statuses, red light indicates this event happened.
Diagram
Input and output power flow of UPS.
Scroll
Records the most recent UPS data information. You can change the displayed item from System->Main Screen.
Outlet
Displays the UPS outlet status (If your UPS cannot control the outlet this button disappears).
Status: Identifies the current outlet status: Normal or shut.
Next Turn Off Time: System->Configuration->UPS->Schedule
Next Turn On time: System->Configuration->UPS->Schedule
Network
Displays all the Bulldog Services searched in the LAN.
Belkin Components 42
Service and Support
Corporate Headquarters
Belkin Corporation
501 West Walnut Street
Compton • CA • 90220-5221 • USA
Tel: 310.898.1100
Fax: 310.898.1111
Customer Service/Sales:
800.2BELKIN
800.223.5546
Technical Support:
310.898.1100 ext. 2263
800.223.5546 ext. 2263
Fax: 310.604.2089 [email protected]
belkin.com/support/tech
United Kingdom
Belkin Components, Ltd.
Express Business Park
Shipton Way • Rushden • NN10 6GL
United Kingdom
Tel: +44 (0) 1933 35 2000
Fax: +44 (0) 1933 31 2000
France
Belkin SAS Components
5 rue du Petit Robinson
78 350 Jouy en Josas • France
Tel: +33 (0) 1 34 58 14 00
Fax: +33 (0) 1 39 46 62 89
Germany
Belkin Components GmbH
Hanebergstrasse 2
Belkin Components 43
80637 • München • Germany
Tel: +49 (0) 89 143405 0
Fax: +49 (0) 89 143405 100
The Netherlands
Belkin Components B.V.
Starparc Building • Boeing Avenue 333
1119 PH Schiphol-Rijk • The Netherlands
Tel: +31 (0) 20 654 7300
Fax: +31 (0) 20 654 7349
European Customer Service/Sales:
00 800 223 55 460 [email protected]
European Tech Support:
00 800 223 55 460 [email protected]
Australia
Belkin, Ltd.
7 Bowen Crescent • West Gosford • NSW 2250 Australia
Tel: +61 (0) 2 4372 8600
Fax: +61 (0) 2 4372 8603
Tech Support:
Australia Toll Free 1800 666 040
New Zealand Toll Free 0800 441 913
Singapore Toll Free 800 6161 790 belkin.com/anz
China
Belkin Shanghai Representative Office
Suite 31 • 39/F • Plaza 66
1266 Nanjing West Road
Shanghai • 200040 • China
Tel: 8621-62881747
Fax: 8621-62881748
Belkin Components 44
Customer Service/Sales: [email protected]
Tech Support:
800-820-5816
Belkin Components 45
Unduh
Tautan publik diperbarui
Tautan publik ke obrolan Anda telah diperbarui. You may view and manage your chat links after registration here.
Tautan publik dokumen
Iklan