Redback A 4585 Zone Paging System, A 4586 Paging Console Operating Manual
The A 4585 Zone Paging System and A 4586 Paging Console offer a versatile and cost-effective solution for public address and background music control in up to 16 zones. This system allows for background music selection in each zone, which is automatically muted when general paging or evacuation signals are activated. The A 4586 Paging Console provides multi-zone paging, store and recall functionality, and an emergency override feature for critical situations.
Advertisement
Advertisement
www.altronics.com.au
A 4585
A 4586
Operating Manual
A 4585
Zone Paging System
A 4586 Paging Console (Optional)
Redback® Proudly Made In Australia
Distributed by Altronic Distributors Pty. Ltd.
Phone: 1300 780 999 Fax: 1300 790 999 Internet: www.altronics.com.au
IMPORTANT NOTE:
Please read these instructions carefully from front to back prior to installation. They include important setup instructions.
Failure to follow these instructions may prevent the system from working as designed.
User manual revision number: 1.4 1/09/2015
REDBACK is a registered trademark of Altronic Distributors Pty Ltd
Since 1976 Redback amplifiers have been manufactured in Perth, Western Australia by Altronics. With over 35 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. We believe there is significant added value for customers when purchasing an
Australian made Redback amplifier or PA product
Australian Made Status
All Redback house products made by Altronics will now be sporting the official Australian Made logo. Since starting manufacturing of commercial audio equipment in the mid 70’s we have always taken pride in producing a quality local product.
The new adoption of the Australian Made logo will help us get the word out to local and export markets that our products carry the official compliance seal of the Australian Made campaign. We have always pushed our ‘local is better’ line in all of our marketing efforts, it’s always an added boost when you are backed up by a widely recognised and respected icon.
Industry leading 10 year warranty.
There’s a reason we have the industry leading DECADE warranty. It’s because of a long tried and tested history of bulletproof reliability. We’ve heard PA contractors tell us they still see the original Redford amplifier still in service in schools - that’s over 37 years of operation - and still going strong!
Published by Altronic Distributors
© 2015 Altronic Distributors
2 Redback® Proudly Made In Australia www.altronics.com.au
Contents
1.0 Overview
1.3 in 4
1.5 Rear panel connections
2.0 Setup
6-7
2.4 Evac Inputs
2.5 24V DC Switched Output
3.0 Paging Console
11-12
12-13
14
DIP 15 the 15 the 16
3.1.8 Busy
4.0 Troubleshooting
6.0 A 4586 Programming Sheets 20 www.altronics.com.au
Redback® Proudly Made In Australia 3
Overview
1.0 OVERVIEW
1.1 INTRODUCTION
This unit is a very versatile cost effective public address/background music control system which provides audio to up to 16 zones. Background music which can be selected to play through any zone is muted when general paging occurs or when an evacuation input overrides the system.
Operation is as follows:
Background music is piped to any zone which has been selected to have background music via switches on the front of the A 4585.
General Paging (via optional A 4586 paging station) will mute the background music to the zone paged or all zones depending on the setup configuration. The paging audio will then feed to the selected zones.
A 4575 RJ45 Input mutes background music to all zones. This is a vox enabled input which can be adjusted via a vox sensitivity control. The audio from the A 4575 will then feed to all zones.
Evac Input mutes background music to all zones. This input has the same priority as the A 4575 RJ45 input. This input is a vox enabled dual RCA input adjusted via a vox sensitivity control. The audio from the Evac input will then feed to all zones.
1.2 FEATURES
• 16 zone paging
• Background music selectable to each zone
• Evac Input
• A 4575 Alert/Evac controller interface input (via CAT5E cable)
• 100V or line level switching
• 24V switched output
• Backup battery input
• Single amp or Dual amp mode
• 24V DC operation.
• 19” Rack Mount (2 unit).
Optional Features
• Zone and emergency over-ride paging via A 4586 paging console.
1.3 WHAT’S IN THE BOX
A 4585 Audio Switcher
24V DC 2A Plugpack
USB - PS2 compatible keyboard (Altronics D 2111)
Instruction Booklet
WARNING
System components are connected using standard “pin to pin” configuration RJ45 data cabling. When installing ensure all connections are verified before switching any system component on.
Failure to follow the correct wiring configuration may result in damage to system components.
For the correct wiring configuration, see section 6.0 “Troubleshooting”.
4 Redback® Proudly Made In Australia www.altronics.com.au
Overview
1.4 FRONT PANEL GUIDE
Fig 1.4A shows the layout of the A 4585 front panel.
1
Off
On
2
Off
On
3
Off
On
4
Off
On
5
Off
On
6
Off
On
Zone Background Music Selector
7
Off
8
Off
9
Off
10
Off
On On On On
11
Off
On
12
Off
On
13
Off
On
14
Off
On
15
Off
On
16
Off
On
2
BGM Vol
4 6
8
0 10
2
0
Mic Vol
4 6
10
8
System
Active
Evac
Active
A 4585
Communicator
On
Power
1 2 3 4 5 6 7
Fig 1.4A
5
6
7
3
4
1
2
Zone Background music selector switches
Use these switches to turn on or off the background music to a zone.
Background music volume control
Use this control to adjust the volume of the background music input.
Paging microphone volume control
Use this control to adjust the volume of the paging microphone input.
System active indicator
This led illuminates to indicate when the system is active.
Evac active indicator
These LED illuminate to indicate when the evac input is active.
On indicator
This led indicates the unit has power.
Power switch
Use this to switch to turn on mains power 220-240V AC.
www.altronics.com.au
Redback® Proudly Made In Australia 5
Overview
1.5 REAR PANEL CONNECTIONS
Fig 1.5A shows the layout of the A 4585 rear panel.
1 2 3 4 5 6 7 8 9 10 11 12
24V DC
IN
From
24V
BATTERY
DC FUSE
24V
Switched
Out
+
_
+
_
(1A M205)
L L
R
R
PA Out
BGM Out BGM Input
Evac Input
Manufactured in Australia By Altronic Distributors Pty. Ltd.
Evac Vox
Sensitivity
A 4575 Input www.altronics.com.au
1 2
3 4
Paging Stations
SW
1
2
3-8
DIP Switch Settings
On
Single Amp Mode
Line Level
Off
Dual Amp Mode
Speaker Level
Not Used
16 15
100V Switching -
Preamp Switching -
14 13
1 AMP SYSTEM - Connect PA amp 100V output to “From PA AMP” Terminals
2 AMP SYSTEM - Connect PA amp 100V output to “From PA AMP” terminals and BGM amp 100V ouput to “From BGM AMP terminals.
Connect Zone amplifier speakers to ”+” and “-” terminals.
Connect Zone amplifier line level inputs to “+” , ” - ” and “ ” terminals.
Zones
12 11 10 9 8 7 6 5 4 3 2
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
+ + + + + + + + + + + + + + + -
1
+
From
PA
AMP
From
BGM
AMP
+ -
5
6
3
4
1
2
7
8
9
15
Fig 1.5A
24V DC Input
Connects to a 24V DC input with at least 1 amp current capacity. (Please observe the polarity)
24V Battery Backup
Connect a 24V backup supply to these terminals. (Please observe the polarity)
DC fuse (2A M205)
This fuse protects the internal power supply. Replace with 2A rated fuse only.
24V DC Switched Output
A 24V output is provided which operates in a normally closed and normally open condition.
This is activated whenever a zone is paged or when an evac input is triggered (see dip switch settings).
PA Out RCA Connectors
Connect these outputs to the input of the paging amplifier
BGM Out RCA Connectors
Connect these outputs to the input of the background music amplifier
BGM In RCA Connectors
Connect these inputs to the output of the background music source such as a CD player.
Evac In RCA Connectors
Connect these inputs to the output of an evacuation tone generator.
Emergency input Vox Level
14
13
10 A 4575 RJ45 input
11 RJ45 connectors for paging consoles
These RJ45 ports connect to the A 4586 zone paging consoles.
NOTE: A maximum of two A 4586 microphone paging consoles may be connected to each port.
6 Redback® Proudly Made In Australia www.altronics.com.au
Overview
12 Dip Switch Settings
Fig 1.6A shows the settings available.
DIP switch 1 sets set the amplifier mode, either single amp or dual amp mode. (see section 2.2 for more details)
DIP switch 2 sets the output level, either line level or 100V speaker level. (see section 2.2 for more details)
DIP switch 3 sets the 24V DC switched output configuration. This can be set to operate when any zone is triggered or for Evac triggering. (see section 2.5 for more details)
DIP switches 4-8 are not used.
SW
1
2
3
4-8
DIP Switch Settings
On
Single Amp Mode
Line Level
24V DC Output
EVAC trigger only
Off
Dual Amp Mode
Speaker Level
24V DC Output any zone trigger
NOT USED
Fig 1.6A
13
14
15
From BGM AMP input
Connect this 100V line input from the 100V output of the BGM (background music) amplifier.
From PA AMP input
Connect this 100V line input from the 100V output of the PA (or paging) amplifier.
Zone 1-16 outputs.
The zone outputs can be either 100V or line level depending on configuration of the dip switches (see Fig1.6A)
2.0 SETUP
2.1 Setup Guide
The A 4585 is a 16 zone paging system which switches 100V speaker levels or balanced low level (line levels) signals.
Background music which can be piped to any zone is muted when paging is initiated by the A 4586 paging consoles or when the Evac input is triggered.
WARNING : For correct operation the dip switches 1 & 2 need to be set before using the unit.
If the A 4585 is being used in single amplifier mode (see section 2.2.1) dip switch 1 must be set to “ON” otherwise if the unit is being used in two amplifer mode (see section 2.2.2) then dip switch 1 must be set to “OFF”
When using the unit for 100V speaker switching Dip switch 2 must be set to “OFF”.
If line level switching is required then Dip Switch 2 must be set to “ON”.
Failure to set the dip switches correctly might result in the unit malfunctioning. www.altronics.com.au
Redback® Proudly Made In Australia 7
Setup Guide
2.2 SWITCHING 100V SPEAKER LEVELS
There are two different configurations for switching 100V speaker levels. The first uses a single amp system which is used for both Background music and PA paging. This setup mutes background music to “ALL” zones when any zone is paged.
(see section 2.2.1)
The second setup involves a two amplifier system where both the background music and the PA paging has its own dedicated amplifier. This setup mutes background music to only those zones which are being paged. (See section 2.2.2)
2.2.1 SINGLE AMPLIFIER 100V LINE SWITCHING
A single amp system uses one amplifier which is used for both the background music and the PA paging. In this configuration when any zone or zones is paged the background music will be muted to all zones. (Note: If muting is desired for only those zones being paged a two amplifier setup is required (See section 2.2.2)).
NOTE : Before turning the unit on make sure the dip switches are set correctly.
For single amp switching of 100V speaker levels, Dip switch 1 should be set to “ON”
and dip switch 2 should be set to “OFF” (see Dip switch settings Fig 1.6)
Each zone requiring background music must be switched “ON” from the “Zone Background Music Selector” switches on the front of the A 4585. (refer to section 1.4)
A background music source such as a CD player is connected to the BGM input (RCA connectors) on the rear of the
A 4585.
The amplifier audio connection is from the “PA Out” RCA sockets on the rear of the A 4585. This is a line level signal and must be connected to a Line/Aux input on the amplifier.
The amplifier 100V output must be connected to the “From PA AMP” terminals on the rear of the A 4585.
The zone 100V speakers are wired to the “+” and “-” terminals only on the rear of the A 4585 as shown in Fig 2.2A.
(Note: the earth connection is not used for 100V switching system. This terminal is used when switching line level signals.)
Single Amplifier 100V Line Switching
Line Input
100V LINE AMPLIFIER
REDBACK
PHASE
5
A 4270 125W
Public Address Amplifie
POWER
100V Output
REDBACK
CD
BGM (Background Music Source)
CAT5 cable
(Max 300 Metres)
A 4586 Communicator
REDBACK A 4586
8 Zone Communicator
Version 1.1
Lock On
Page
System Busy
A 4586 Paging Console
Store
Recall
All Call
Cancel
Connect to
“From PA AMP” terminals
24V DC
IN
From
24V
BATTERY
DC FUSE
24V
Switched
Out
+
_
+
_
(1A M205)
L L
R R
PA Out
BGM Out BGM Input Evac Input
Manufactured in Australia By Altronic Distributors Pty. Ltd.
Evac Vox
Sensitivity
A 4575 Input www.altronics.com.au
1 2
3 4
Paging Stations
SW
1
2
DIP Switch Settings
On
Single Amp Mode
Line Level
Off
Dual Amp Mode
Speaker Level
3-8 Not Used
16 15
100V Switching -
1 AMP SYSTEM - Connect PA amp 100V output to “From PA AMP” Terminals
2 AMP SYSTEM - Connect PA amp 100V output to “From PA AMP” terminals and BGM amp 100V ouput to “From BGM AMP terminals.
Connect Zone amplifier speakers to ”+” and “-” terminals.
Preamp Switching -
Connect Zone amplifier line level inputs to “+” , ” - ” and “ ” terminals.
Zones
14 13 12 11 10 9 8 7 6 5 4 3 2
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
+ + + + + +
+ +
+ + + +
+ + -
1
+ +
From
PA
AMP
From
BGM
AMP
+_
Speakers to be paged must be fitted with 100V line transformers.
Connect using the “+” and “-” terminals. (Do not use the “ ” terminal)
Zone
16
Zone
15
Zone
14
Zone
13
Zone
12
Zone
11
Zone
10
Zone
9
Zone
8
Zone
7
Zone
6
Zone
5
Zone
4
Zone
3
Zone
2
Zone
1
Fig 2.1
8 Redback® Proudly Made In Australia www.altronics.com.au
Setup Guide
2.2.2 TWO AMPLIFIER 100V LINE SWITCHING
A two amplifier system uses dedicated amplifiers for both the background music and the PA paging. This setup mutes background music to only those zones which are being paged.
NOTE : Before turning the unit on make sure the dip switches are set correctly.
For two amp switching of 100V speaker levels, Dip switch 1 should be set to “OFF”
and dip switch 2 should be set to “OFF” (see Dip switch settings Fig 1.6)
Each zone requiring background music must be switched “ON” from the “Zone Background Music Selector” switches on the front of the A 4585. (refer to section 1.4)
A background music source such as a CD player is connected to the BGM input (RCA connectors) on the rear of the
A 4585.
Paging Amplifier Connections
The paging amplifier audio connection is from the “PA Out” RCA sockets on the rear of the A4585. This is a line level signal and must be connected to a Line/Aux input on the amplifier.
The paging amplifier 100V output must be connected to the “From PA AMP” terminals on the rear of the A 4585.
Background Music Amplifier Connections
The background music amplifier audio connection is from the “BGM Out” RCA sockets on the rear of the A 4585. This is a line level signal and must be connected to a Line/Aux input on the amplifier.
The background music amplifier 100V output must be connected to the “From BGM AMP” terminals on the rear of the
A 4585.
The zone 100V speakers are wired to the “+” and “-” terminals only on the rear of the A 4585 as shown in Fig 2.2A.
(Note: the earth connection is not used for 100V switching system. This terminal is used when switching line level signals.)
Two Amplifier 100V Line Switching
100V Output
REDBACK
PHASE
5
A 4270 125W
Public Address Amplifie
Line Input
100V LINE PAGING AMPLIFIER
POWER
REDBACK
PHASE
5
A 4270 125W
Public Address Amplifie
Line Input
POWER
100V LINE BACKGROUND MUSIC AMPLIFIER
REDBACK
CD
BGM (Background Music Source)
100V Output
24V DC
IN
From
24V
BATTERY
DC FUSE
24V
Switched
Out
+
_
+
_
(1A M205)
L L
R R
PA Out BGM Out BGM Input
Evac Input
Manufactured in Australia By Altronic Distributors Pty. Ltd.
Evac Vox
Sensitivity
A 4575 Input www.altronics.com.au
CAT5 cable
(Max 300 Metres)
A 4586 Communicator
REDBACK A 4586
8 Zone Communicator
Version 1.1
Lock On
Page
System Busy
A 4586 Paging Console
Store
Recall
All Call
Cancel
Connect to
“From PA AMP” terminals
1 2
3 4
Paging Stations
SW
1
2
DIP Switch Settings
On
Single Amp Mode
Line Level
Off
Dual Amp Mode
Speaker Level
3-8 Not Used
16 15
100V Switching - 1 AMP SYSTEM - Connect PA amp 100V output to “From PA AMP” Terminals
2 AMP SYSTEM - Connect PA amp 100V output to “From PA AMP” terminals and BGM amp 100V ouput to “From BGM AMP terminals.
Connect Zone amplifier speakers to ”+” and “-” terminals.
Preamp Switching -
Connect Zone amplifier line level inputs to “+” , ” - ” and “ ” terminals.
Zones
14 13 12 11 10 9 8 7 6 5 4 3 2
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
+ + + + + + + + -
1
+ + + + + + + +
From
PA
AMP
From
BGM
AMP
+_
Speakers to be paged must be fitted with 100V line transformers.
Connect using the “+” and “-” terminals. (Do not use the “ ” terminal)
Zone
16
Zone
15
Zone
14
Zone
13
Zone
12
Zone
11
Zone
10
Zone
9
Zone
8
Zone
7
Zone
6
Zone
5
Zone
4
Zone
3
Zone
2
Zone
1
Fig 2.2
www.altronics.com.au
Redback® Proudly Made In Australia 9
Setup Guide
2.3 SWITCHING LINE LEVELS
The A 4585 can also be used to switch line level signals. Amplifiers are not connected to the PA OUT or BGM OUT of the
A 4585. Instead each zone has its own dedicated amplifer which can then feed multiple areas. Background music and the evacuation tones are still supplied by the A 4585 and are fed into each zone amplifier. Each zone amplifier can still have its own local microphone or background music.
NOTE : Before turning the unit on make sure the dip switches are set correctly.
Dip switch 2 should be set to “ON” (see Dip switch settings Fig 1.6)
Dip switch 1 will be disabled if dip switch 2 is set to “ON”
This setup mutes the background music (supplied by the A 4585) to only those zones which are being paged.
Each zone requiring background music must be switched “ON” from the “Zone Background Music Selector” switches on the front of the A 4585. (refer to section 1.4)
A background music source such as a CD player is connected to the BGM input (RCA connectors) on the rear of the
A 4585.
The zone output terminals on the rear of the A 4585 are connected to the zone amplifier inputs. The “+”,”-” and earth terminals are all used. Each zone output is a low impedance signal suitable for feeding directly into a power amplifier. As the signal is balanced the amplifier can be remotely located when connected using 2 core shielded cable. This enables the amplifier to be located up to 100m from the A 4585 switch box.
Individual Zone Amplifier Preamp (Low Level) Switching
REDBACK
CD
BGM (Background Music Source)
24V DC
IN
From
24V
BATTERY
DC FUSE
24V
Switched
Out
+
_
+
_
(1A M205)
L
L
R R
PA Out
BGM Out BGM Input Evac Input
Manufactured in Australia By Altronic Distributors Pty. Ltd.
Evac Vox
Sensitivity
A 4575 Input www.altronics.com.au
CAT5 cable
(Max 300 Metres)
A 4586 Communicator
REDBACK A 4586
8 Zone Communicator
Version 1.1
Lock On
Page
System Busy
Store
Recall
All Call
Cancel
A 4586 Paging Console
1
2
3 4
Paging Stations
SW
1
2
3-8
DIP Switch Settings
On
Single Amp Mode
Line Level
Off
Dual Amp Mode
Speaker Level
Not Used
16 15
100V Switching -
Preamp Switching -
1 AMP SYSTEM - Connect PA amp 100V output to “From PA AMP” Terminals
2 AMP SYSTEM - Connect PA amp 100V output to “From PA AMP” terminals and BGM amp 100V ouput to “From BGM AMP terminals.
Connect Zone amplifier speakers to ”+” and “-” terminals.
Connect Zone amplifier line level inputs to “+” , ” - ” and “ ” terminals.
Zones
14 13 12 11 10 9 8 7 6 5 4 3 2
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
+ + + + + + + + + + + -
1
+ + + + +
From
PA
AMP
From
BGM
AMP
+_
ZONE 16 AMPLIFIER
100V Output
REDBACK
CD
LOCAL MIC
REDBACK PHASE
5
A 4270 125W
Public Address Amplifie
POWER
LOCAL BGM
ZONE 9 AMPLIFIER
100V Output
LOCAL MIC
REDBACK
PHASE
5
POWER
REDBACK
CD
LOCAL BGM
-
+
Output connector configuration for each zone.
ZONE 1 AMPLIFIER
REDBACK
CD
LOCAL MIC
REDBACK PHASE
5
POWER
LOCAL BGM
ZONE 8 AMPLIFIER
100V Output
100V Output
REDBACK
CD
LOCAL MIC
REDBACK PHASE
5
POWER
LOCAL BGM
Fig 2.3
10 Redback® Proudly Made In Australia www.altronics.com.au
Setup Guide
2.4 EVAC INPUTS
There are two forms of evacuation inputs available on the A 4585.
A 4575 RJ45 Input
The first is made via an RJ45 connection on the back of the unit which feeds directly from the A 4575 Alert/Evacuation controller (see Fig 2.4a). A CAT5e cable connected between the two units pipes in the evac audio from the A 4575. The trigger level is adjusted via the evac vox sensitivity control of the back of the A 4585. Once the evac input is triggered, background music will be muted to all zones. Paging from an A 4586 paging console will over-ride the evac input.
When the evac input is active the “Evac active” led on the front of the unit will illuminate.
EVACUATION INPUT TRIGGERING VIA A 4575 ALERT/EVAC CONTROLLER
24V DC
IN
From
24V
BATTERY
DC FUSE
24V
Switched
Out
+
_
+
_
(1A M205)
L
L
R R
PA Out BGM Out
BGM Input Evac Input
Manufactured in Australia By Altronic Distributors Pty. Ltd.
Evac Vox
Sensitivity A 4575 Input www.altronics.com.au
A 4586 Communicator
CAT5e cable
(Max 300 Metres)
REDBACK A 4586
8 Zone Communicator
Version 1.1
Lock On
Page
Store
Recall
All Call
Cancel
1 2
3 4
Paging Stations
System Busy
SW
1
2
3-8
DIP Switch Settings
On
Single Amp Mode
Line Level
Off
Dual Amp Mode
Speaker Level
Not Used
16 15
A 4586 Paging Console
A 4585 COMMUNICATOR
100V Switching -
Preamp Switching -
1 AMP SYSTEM - Connect PA amp 100V output to “From PA AMP” Terminals
2 AMP SYSTEM - Connect PA amp 100V output to “From PA AMP” terminals and BGM amp 100V ouput to “From BGM AMP terminals.
Connect Zone amplifier speakers to ”+” and “-” terminals.
Connect Zone amplifier line level inputs to “+” , ” - ” and “ ” terminals.
Zones
14 13 12 11 10 9 8 7 6 5 4 3 2 1
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
+ + + + + + + + + + + + + + + +
From
PA
AMP
From
BGM
AMP
+_
NOTE : The A 4575 input is to be connected only to an A 4575 Alert/Evac Controller
Evac input vox sensitivity set by this trimpot.
CAT5e cable
(Max 300 Metres)
A 4575 ALERT/EVAC CONTROLLER
1 2 3 4 5 6 7 8
+ _
Fig 2.4a
Evac Input (Dual RCA)
The second type of evac input is in the form of a dual RCA audio input on the rear of the unit labelled Evac Input (see
Fig 2.4b). The trigger level is adjusted via the evac vox sensitivity control of the back of the A 4585. Once the evac input is triggered, background music will be muted to all zones. Paging from an A 4586 paging console will over-ride the evac input. When the evac input is active the “Evac active” led on the front of the unit will illuminate.
Note: This could also be used for ALL CALL telephone paging when used with a suitable Line Isolation Unit.
www.altronics.com.au
Redback® Proudly Made In Australia 11
Setup Guide
EVACUATION INPUT TRIGGERING VIA EVAC INPUT (DUAL RCA)
Evac input vox sensitivity set by this trimpot.
24V DC
IN
From
24V
BATTERY
DC FUSE
24V
Switched
Out
+
_
+
_
(1A M205)
L
L
R R
PA Out
BGM Out BGM Input Evac Input
Manufactured in Australia By Altronic Distributors Pty. Ltd.
Evac Vox
Sensitivity A 4575 Input www.altronics.com.au
CAT5e cable
(Max 300 Metres)
A 4586 Communicator
REDBACK A 4586
8 Zone Communicator
Version 1.1
Lock On
Page
System Busy
Store
Recall
All Call
Cancel
1 2
3 4
Paging Stations
A 4586 Paging Console
A 4585 COMMUNICATOR
SW
1
2
3-8
DIP Switch Settings
On
Single Amp Mode
Line Level
Off
Dual Amp Mode
Speaker Level
Not Used
16 15
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
+ + -
100V Switching - 1 AMP SYSTEM - Connect PA amp 100V output to “From PA AMP” Terminals
2 AMP SYSTEM - Connect PA amp 100V output to “From PA AMP” terminals and BGM amp 100V ouput to “From BGM AMP terminals.
Connect Zone amplifier speakers to ”+” and “-” terminals.
Preamp Switching -
14 13
Connect Zone amplifier line level inputs to “+” , ” - ” and “ ” terminals.
Zones
12 11 10 9 8 7 6 5 4 3 2
+ +
+ + + + + + + + + + + -
1
+
From
PA
AMP
From
BGM
AMP
+_
Dual RCA Lead
A 4572 ALERT/EVAC TONE GENERATOR
Made In Australia by Altronic Distributors Pty Ltd. www.altronics.com.au
DIP SWITCHES
DC Fuse
M205 500mA
24V
DC In
1 2 3 4 5 6 7 8
Cancel
CONTACTS
Evac Alert Bell Switched
24V OUTPUTS
Bell Evac Alert
1 2 3 4 5 6 7 8
N816
+ -
Mic
-
+
L
R
Audio Out
Chime
Volume
Tones V/Over Record
Evac tones generated by
Altronics A 4572 or similar
Fig 2.4b
2.5 24V DC SWITCHED OUTPUT
A switched output has been provided to allow for the connection of external 24V DC operated fixtures.
24V DC Switched Output
N/O - No voltage present when non-active
24VDC present when active
N/C - 24VDC present when non-active
No voltage present when active
DIP switch 3 set to “OFF”
The 24V switched output activates when any zone on any paging console is paged or when any evac input is triggered.
24V DC
IN
From
24V
BATTERY
DC FUSE
24V
Switched
Out
+
_
+
_
(1A M205)
L L
R
R
PA Out BGM Out
BGM Input Evac Input
Manufactured in Australia By Altronic Distributors Pty. Ltd.
Evac Vox
Sensitivity
A 4575 Input www.altronics.com.au
1
2
3 4
Paging Stations
SW
1
2
3-8
DIP Switch Settings
On
Single Amp Mode
Line Level
Off
Dual Amp Mode
Speaker Level
Not Used
16 15
100V Switching -
1 AMP SYSTEM - Connect PA amp 100V output to “From PA AMP” Terminals
2 AMP SYSTEM - Connect PA amp 100V output to “From PA AMP” terminals and BGM amp 100V ouput to “From BGM AMP terminals.
Connect Zone amplifier speakers to ”+” and “-” terminals.
Preamp Switching -
14 13
Connect Zone amplifier line level inputs to “+” , ” - ” and “ ” terminals.
Zones
12 11 10 9 8 7 6 5 4 3 2
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
+ + + + + +
+ +
+ + + +
+ + + -
1
+
From
PA
AMP
From
BGM
AMP
+_
Attenuator fitted with over-ride relay
CAT5e cable
(Max 300 Metres)
CAT5e cable
(Max 300 Metres)
A 4586 Communicator
REDBACK A 4586
8 Zone Communicator
Version 1.1
Lock On
Page
System Busy
Store
Recall
All Call
Cancel
A 4586 Paging Console
General paging will activate the 24V output.
A 4575 ALERT/EVAC CONTROLLER
1 2 3 4 5 6 7 8
+ _
24V DC
Relay
Evacuation strobe
External DC supply to power strobe.
DC supply
Dual RCA Lead
Made In Australia by Altronic Distributors Pty Ltd. www.altronics.com.au
DIP SWITCHES
DC Fuse
M205 500mA
24V
DC In
1 2 3 4 5 6 7 8
CONTACTS
Cancel Evac Alert Bell Switched
24V OUTPUTS
Bell Evac
1 2 3 4 5 6 7 8
Alert
N816
+ -
Mic
+
L
R
Audio Out
Chime
Volume
Tones V/Over Record
A 4572 ALERT/EVAC TONE GENERATOR
Evac tones generated by
Altronics A 4572 or similar
Fig 2.5a
12 Redback® Proudly Made In Australia www.altronics.com.au
Setup Guide
This is set by Dip Switch 3 (see section 1.5)
The 24V DC output can be used to operate attenuators fitted with override relays, evacuation strobes (with the addition of external relays and DC supplies), or any other fire evacuation equipment operated of 24V DC. It is important that any product connected to the 24V DC output not draw more than 100mA maximum.
This output can be set to be activated any time any zone is paged or any form of evac input is triggered (see Fig 2.5a).
“or”
only when the Evac input has been triggered (see Fig 2.5b).
24V DC Switched Output
N/O - No voltage present when non-active
24VDC present when active
N/C - 24VDC present when non-active
No voltage present when active
DIP switch 3 set to “ON”
The 24V switched output activates when an evac signal comes from the A 4575 into the A 4575 input or when an evac audio signal is received at the
Evac RCA input . NOTE : general zone paging will not activate the 24V output.
24V DC
IN
From
24V
BATTERY
DC FUSE
24V
Switched
Out
+
_
+
_
(1A M205)
L L
R
R
PA Out BGM Out BGM Input
Evac Input
Manufactured in Australia By Altronic Distributors Pty. Ltd.
Evac Vox
Sensitivity
A 4575 Input www.altronics.com.au
1 2
SW
1
2
DIP Switch Settings
On
Single Amp Mode
Line Level
Off
Dual Amp Mode
Speaker Level
3-8 Not Used
16 15
100V Switching -
Preamp Switching -
1 AMP SYSTEM - Connect PA amp 100V output to “From PA AMP” Terminals
2 AMP SYSTEM - Connect PA amp 100V output to “From PA AMP” terminals and BGM amp 100V ouput to “From BGM AMP terminals.
Connect Zone amplifier speakers to ”+” and “-” terminals.
Connect Zone amplifier line level inputs to “+” , ” - ” and “ ” terminals.
Zones
14 13 12 11 10 9 8 7 6 5 4 3 2 1
3 4
Paging Stations
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
+ + + + + + + + + + + + + + + +
From
PA
AMP
From
BGM
AMP
+_
Attenuator fitted with over-ride relay
CAT5e cable
(Max 300 Metres)
CAT5e cable
(Max 300 Metres)
A 4586 Communicator
REDBACK
A 4586
8 Zone Communicator
Version 1.1
Lock On
Page
System Busy
Store
Recall
All Call
Cancel
A 4586 Paging Console
General paging will “NOT” activate the 24V output.
A 4575 ALERT/EVAC CONTROLLER
1 2 3 4 5 6 7 8
+ _
Evacuation strobe
24V DC
Relay
DC supply
External DC supply to power strobe.
Dual RCA Lead
DC Fuse
M205 500mA
24V
DC In
DIP SWITCHES
CONTACTS
Cancel Evac Alert Bell Switched
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
24V OUTPUTS
Bell Evac Alert
N816
+ -
Mic
+
L
R
Audio Out
Chime
Volume
Tones V/Over Record
A 4572 ALERT/EVAC TONE GENERATOR
Evac tones generated by
Altronics A 4572 or similar
Fig 2.5b
www.altronics.com.au
Redback® Proudly Made In Australia 13
Paging Console
3.0 PAGING CONSOLES
3.1 A 4586 OVERVIEW
The A 4586 paging console provides up to 16 zones of paging to the A 4585 audio switcher.
The consoles can be used for multi zone paging with the facility to store and recall multiple zones to a single button. The recall functions can also be labelled via a USB - PS2 compatible keyboard which can be plugged into the rear of the unit.
(see section 3.1.7) The labels will then be displayed on the highly functional and attractive LCD. An example might be a label “sales”.
An emergency paging over-ride facility is accessed by a combination of an illuminated push button switch and a PTT (push to talk) switch. This combination removes the possibliity of accidentally activating the emergency over-ride facility. When activated, emergency paging will be forced through to all zones.
A maximum of 8 paging consoles can be connected to the A 4585 at the same time. These work in a “first in, best dressed” arrangement. The consoles can be cascaded together or wired back to the A 4585 (see section 3.1.3 to 3.1.5 for details).
Each unit must be assigned an ID number through DIP switch settings on the rear of the unit.
A pre-announcement chime is available at the paging console and through the PA system. Both of these are set by DIP switches on the rear of the unit.
24VDC In
Manufactured in Australia By Altronic Distributors Pty. Ltd.
To Main Unit To 2nd Console USB
Keyboard
(Must be PS2
Compatible) www.altronics.com.au
Mic
Volume
Chime
Volume
Off
ON ON
1 2 3 4 1 2 3 4
1 2 3 4 5 6 7 8
SW
4
Not Used
Not Used
DIP Switches 6-8
Set the Paging
Console ID
6 7 8 ID
1
Off On Off 3
4
7
3
4
1
2
5
6
1 2 3
24V DC connector
2.1mm DC jack (centre pin positive).
4 5 6
RJ45 connector
For connection back to the A 4585.
Cascade paging connector
Secondary RJ45 socket for cascading a second console.
USB keyboard input.
Use the keyboard to record labels for saved store functions.
Microphone volume
Use this volume to adjust the microphone level.
Chime volume
Use this volume to adjust the chime level.
7 DIP switch options
These switches set the chime and emergency paging on or off and also assign a location number or ID to the console.
14 Redback® Proudly Made In Australia
Fig 3.1A
www.altronics.com.au
Paging Console
3.1.1 Features
• Multi zone paging.
• Recall multiple zones with a single button press.
• Keyboard entry labelling of recall zones.
• LCD for indicating zone selections.
• Pre-announcement chime.
• Emergency override paging to all zones.
3.1.2 DIP Switch Settings
A series of DIP switches which are accessed on the rear of the unit provide a number of options.
DIP switch 1 sets the PA system chime on or off.
DIP switch 2 sets the internal chime on or off.
DIP switch 3 sets the emergency paging on or off. (Note: The emergency paging is only active when the A 4585 receives external emergency tones).
DIP switches 4&5 are not used.
DIP switches 6-8 select the ID number for the console.
Table 3.1A shows the ID settings.
A maximum number of 8 consoles can be connected to the A 4585.
Table 3.1A
DIP Switches 6-8
Set the Paging
Console ID
6 7
8
Off Off Off
Off Off On
Off On Off
Off On On
On Off Off
On Off On
On On Off
On On On
6
8
4
5
ID
1
2
3
3.1.3 Connecting the paging consoles
The consoles are connected to the A 4585 via standard Cat5e cabling as shown in Fig 3.1b. The maximum distance between the A 4585 and a paging console is 300m. Note that each paging console must be assigned an ID number via the DIP switches on the rear of the unit before operation (see 3.1.2 DIP switch settings). Eg Console 1 is set to ID1, console
2 is set to ID2 etc
A maximum of eight consoles can be connected at one time but only used in certain configurations. There are four RJ45 ports on the back of the A 4585 which can be used to connect the A 4586 paging consoles. Each port can accomodate a maximum of 1 paging console without the aid of external power supplies.
Fig 3.1B shows how to connect one paging console per RJ45 port.
A 4586 Communicator
REDBACK A 4586
8 Zone Communicator
Version 1.1
Lock On
Page
System Busy
A 4586 Paging Console
Store
Recall
All Call
Cancel
CAT5e cable
(Max 300 Metres)
24V DC
IN
From
24V
BATTERY
DC FUSE
24V
Switched
Out
+
_
+
_
(1A M205)
L
L
R
R
PA Out
BGM Out BGM Input Evac Input
Manufactured in Australia By Altronic Distributors Pty. Ltd.
Evac Vox
Sensitivity
A 4575 Input www.altronics.com.au
1 2
3 4
Paging Stations
A 4586 Communicator
SW
1
2
DIP Switch Settings
On
Single Amp Mode
Line Level
Off
Dual Amp Mode
Speaker Level
3-8 Not Used
16 15
REDBACK A 4586
8 Zone Communicator
Version 1.1
Lock On
Page
Store
Recall
All Call
Cancel
CAT5e cable
(Max 300 Metres)
System Busy
A 4586 Paging Console
A 4585 COMMUNICATOR
100V Switching - 1 AMP SYSTEM - Connect PA amp 100V output to “From PA AMP” Terminals
2 AMP SYSTEM - Connect PA amp 100V output to “From PA AMP” terminals and BGM amp 100V ouput to “From BGM AMP terminals.
Connect Zone amplifier speakers to ”+” and “-” terminals.
Preamp Switching -
Connect Zone amplifier line level inputs to “+” , ” - ” and “ ” terminals.
Zones
14 13 12 11 10 9 8 7 6 5 4 3 2 1
From
PA
AMP
From
BGM
AMP
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
+ + + + + +
+ +
+ + + +
+ + + +
+_
CAT5e cable
(Max 300 Metres)
CAT5e cable
(Max 300 Metres)
A 4586 Communicator
REDBACK A 4586
8 Zone Communicator
Version 1.1
Lock On
Page
System Busy
A 4586 Paging Console
Store
Recall
All Call
Cancel
A 4586 Communicator
REDBACK A 4586
8 Zone Communicator
Version 1.1
Lock On
Page
System Busy
A 4586 Paging Console
Store
Recall
All Call
Cancel
PLEASE NOTE : A MAXIMUM OF 4 PAGING CONSOLES CAN BE CONNECTED TO THE A 4585
WITHOUT THE USE OF EXTERNAL POWER SUPPLIES. (AND A MAXIMUM OF 1 PAGING CONSOLE PER PORT)
Fig 3.1B
www.altronics.com.au
Redback® Proudly Made In Australia 15
Paging Console
3.1.4 Cascading the paging consoles
If more than 4 paging consoles are required the consoles can be cascaded together with the addition of external power supplies. Fig 3.1C shows how to connect eight paging consoles at once. Consoles 1-4 are connected to their respective number ports. Ie console 1 to port 1, console 2 to port 2 etc. Any extra consoles are connected as shown in Fig 3.1C, so console 5 to port 1, console 6 to port 2 and so on.
Note that each paging console must be assigned an ID number via the DIP switches on the rear of the unit before operation (see 3.1.2 DIP switch settings). Eg Console 1 is set to ID1, console 2 is set to ID2 etc
In Fig 3.1C a maximum of eight consoles are connected. Consoles 1 & 5 are connected to Port 1, consoles 2 & 6 to port
2, consoles 3 & 7 to port 3 and consoles 4 & 8 are connected to Port 4. Please note: A maximum of 2 paging consoles can be connected per RJ45 port on the A 4585. Each additional paging console has a dedicated power supply and the
Cat5e cable run can be no longer than 300m.
M 9391A 24V DC 1A
Power Supply
M 9391A 24V DC 1A
Power Supply
CONSOLE 5
A 4586 Communicator
REDBACK A 4586
8 Zone Communicator
Version 1.1
Lock On
Page
System Busy
Store
Recall
All Call
Cancel
A 4586 Communicator
REDBACK A 4586
8 Zone Communicator
Version 1.1
Lock On
Page
System Busy
Store
Recall
All Call
Cancel
CONSOLE 6
CAT5e cable
(Max 300 Metres)
CAT5e cable
(Max 300 Metres)
CONSOLE 1
A 4586 Communicator
REDBACK A 4586
8 Zone Communicator
Version 1.1
Lock On
Page
System Busy
Store
Recall
All Call
Cancel
CAT5e cable
(Max 300 Metres)
CAT5e cable
(Max 300 Metres)
A 4586 Communicator
REDBACK A 4586
8 Zone Communicator
Version 1.1
Lock On
Page
System Busy
Store
Recall
All Call
Cancel
CONSOLE 2
24V DC
IN
From
24V
BATTERY
DC FUSE
24V
Switched
Out
+
_
+
_
(1A M205)
L L
R
R
PA Out
BGM Out BGM Input Evac Input
Manufactured in Australia By Altronic Distributors Pty. Ltd.
Evac Vox
Sensitivity
A 4575 Input www.altronics.com.au
1 2
3
4
Paging Stations
SW
1
2
3-8
DIP Switch Settings
On
Single Amp Mode
Line Level
Off
Dual Amp Mode
Speaker Level
Not Used
16 15
100V Switching -
Preamp Switching -
14 13
1 AMP SYSTEM - Connect PA amp 100V output to “From PA AMP” Terminals
2 AMP SYSTEM - Connect PA amp 100V output to “From PA AMP” terminals and BGM amp 100V ouput to “From BGM AMP terminals.
Connect Zone amplifier speakers to ”+” and “-” terminals.
Connect Zone amplifier line level inputs to “+” , ” - ” and “ ” terminals.
Zones
12 11 10 9 8 7 6 5 4 3 2
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
+ + + +
+
+
+ + + + + + + + -
1
+ +
From
PA
AMP
From
BGM
AMP
+_
CAT5e cable
(Max 300 Metres)
CAT5e cable
(Max 300 Metres)
CONSOLE 3
A 4586 Communicator
REDBACK A 4586
8 Zone Communicator
Version 1.1
Lock On
Page
System Busy
Store
Recall
All Call
Cancel
A 4586 Communicator
REDBACK A 4586
8 Zone Communicator
Version 1.1
Lock On
Page
System Busy
Store
Recall
All Call
Cancel
CONSOLE 4
CONSOLE 7
A 4586 Communicator
REDBACK A 4586
8 Zone Communicator
Version 1.1
Lock On
Page
System Busy
Store
Recall
All Call
Cancel
M 9391A 24V DC 1A
Power Supply
M 9391A 24V DC 1A
Power Supply
A 4586 Communicator
REDBACK A 4586
8 Zone Communicator
Version 1.1
Lock On
Page
System Busy
Store
Recall
All Call
Cancel
CONSOLE 8
PLEASE NOTE : A MAXIMUM OF 8 PAGING CONSOLES CAN BE CONNECTED TO THE A 4585
WITH THE USE OF EXTERNAL POWER SUPPLIES. (AND A MAXIMUM OF 2 PAGING CONSOLES PER PORT)
Fig 3.1C
3.1.5 Multi-zone paging
Paging is achieved by pressing the numbered button of the zone required. The button will illuminate. Hold down the page switch and speak into the microphone. Note: a zone with a fast flashing LED has general paging blocked. To page to multiple zones, press the buttons for the desired zones. Multiple buttons will illuminate. Hold down the page switch and speak into the microphone.
3.1.6 Zone Lockout
General paging can be blocked to any zones via the paging console. To block paging to a zone from the A 4586, hold down the desired zone button until a message on the LCD indicates the zone is blocked out. Release the button to resume. To unlock the zone, repeat the procedure. NOTE: This will only lock out zones for use from the console that the zones were locked out from. It will not lock out the same zones from other paging consoles.
16 Redback® Proudly Made In Australia www.altronics.com.au
Paging Console
3.1.7 Store & recall groups of zones
Two function keys labelled store and recall may be used to program groups of zones into a single number recall, just as your telephone might have a “quick dial” memory function.
To store a group of zones
First press the store button on the paging console. Then select the zones you wish to group together. Once the desired zones are selected, press store again. You can now assign a group number using the numbered buttons (1 to 8). If you have previously stored a group of zones in the memory, these buttons will illuminate. Press store to complete the process.
Note that you may select one of the previously stored group numbers, however this will overwrite the existing stored zone selections.
The screen will now prompt you to label your stored group of zones. This allows quick visual feedback to the user when selecting groups of zones, examples of labels might include: All W/house, Bar&Lobby, Sales&Yard etc. Plug in a standard
USB PS2 compatible keyboard (Altronics D 2111) into the rear of the A 4586 paging console and type in your desired label. The maximum label length is 10 characters. Press backspace to delete letters. Hold down the shift key for capital letters. Press return (enter) when finished.
If a zone label is not required, press cancel to complete the process of storing a group of zones.
Note: if the keyboard is not operational, it may need to be unplugged and connected again.
To recall zones
Press the recall button. Any buttons which are programmed with groups of zones will illuminate. If any of these groups were given a label then these will show on the LCD.
Select one of the illuminated buttons to recall. The zones stored in this group will then illuminate automatically.
Hold down the page (PTT) switch and speak into the microphone. Press cancel when finished or the unit will time out automatically after ˜15 seconds.
3.1.8 Paging Console Busy
If the system has more than two A 4586 paging consoles connected there will be times when both units may be needed at the same time. If one of the paging consoles is in use the second console will be notified and the busy LED will illuminate and the LCD will display the image shown below.
Fig 3.1D
www.altronics.com.au
Redback® Proudly Made In Australia 17
Troubleshooting
4.0 TROUBLE SHOOTING
4.1 SYMPTOMS AND REMEDIES
SYMPTOMS
On led doesn’t illuminate
Keyboard not detected on A 4586
REMEDIES
Check DC fuse
Remove & reinsert keyboard
Try another keyboard
Turn A 4585 off and repeat setup
Make sure the keyboard is a USB/PS2 keyboard (altronics D 2111)
4.2 RJ45 cabling configuration for system components
(586A ‘Straight through’)
System components are connected using “pin to pin” configuration RJ45 data cabling as shown in fig 4.2. When installing ensure all connections are verified with a LAN cable tester before switching any system component on.
Failure to follow the correct wiring configuration may result in damage to system components.
586A
Straight Through
(both ends)
Pins Face Upwards
7
8
1 TX+
2 TX-
3 RX +
4
5
6 RX-
7
8
1 TX+
2 TX-
3 RX +
4
5
6 RX-
Fig 4.2
18 Redback® Proudly Made In Australia www.altronics.com.au
5.0 SPECIFICATIONS
A 4585 Control Unit
Paging console inputs:
Data transmission:
Front panel controls:
Front panel indicators:
Rear panel controls:
BGM (background music) input:
Evac input:
BGM (background music) output:
PA (public address) output:
A 4575 input:
24V DC Switched output:
Zone output connectors:
Power connection (24V DC):
Protection (DC):
Dimensions:
Weight:
A 4586 Paging Console
Output connection:
Data transmission:
Front panel controls:
Rear panel controls:
Other inputs:
Mic frequency response:
Mic Sensitivity:
Mic Polar pattern:
Power connection (24VDC):
Mic gooseneck:
Dimensions:
Weight:
4 x RJ45 8P8C
Cat5e cabling max 300m
Mic level control,
BGM (background music) level control, zone BGM selection switches
System active,Evac active
Evac vox level
Dual stereo RCA’s
Dual stereo RCA’s
Dual stereo RCA’s
Dual stereo RCA’s
RJ45 8P8C
Euroblock terminal
Euroblock terminal
Euroblock terminal
2A M205
482W x 175D x 44H mm
2.5kg
2 x RJ45 8P8C
Cat5e cabling max 300m
Zone selection (1-8), store, recall, all call, cancel, PTT switch
Chime output level, mic output level
USB PS2 compatible keyboard
(type A)
100Hz - 10kHz
-76dB ±3dB
Cardioid (unidirectional)
2.1mm JACK (centre +ve)
325mm
235W x 110D x 55H mm (excluding gooseneck)
0.6kg
Specifications www.altronics.com.au
Redback® Proudly Made In Australia 19
Programming Sheets
6.0 A 4586 Programming Sheet
Each A 4586 can store 8 groups of zones using the store & recall function. This permits quick selection of multiple paging zones.
Use the set up sheet below to select the groups of zones. Group names have a maximum of 10 characters. A PDF form version of this is available for download on the A 4586 product page at www.altronics.com.au.
ZONE NAMES
1
5
RECALL 1
1
5
2 3 4
6 7 8
RECALL 5
1 2 3 4
5 6 7 8
2
6
3
7
RECALL 2
1
5
2 3 4
6 7 8
CONSOLE 1
RECALL 3
1
5
2 3 4
6 7 8
RECALL 6
1
5
2 3 4
6 7 8
RECALL 7
1 2 3 4
5 6 7 8
4
8
RECALL 4
1
5
2 3 4
6 7 8
RECALL 8
1 2 3 4
5 6 7 8
RECALL 1
1 2 3 4
5 6 7 8
RECALL 2
1 2 3 4
5 6 7 8
CONSOLE 2
RECALL 3
1
5
2 3 4
6 7 8
RECALL 5
1 2 3 4
5 6 7 8
RECALL 6
1 2 3 4
5 6 7 8
RECALL 7
1 2 3 4
5 6 7 8
NOTE: All Paging microphones can be programmed with different recalls and labelling.
20 Redback® Proudly Made In Australia
RECALL 4
1 2 3 4
5 6 7 8
RECALL 8
1 2 3 4
5 6 7 8 www.altronics.com.au
Download
Public link updated
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Document public link
Advertisement
Key features
16 zone paging
Background music selection
Evacuation input
A 4575 Alert/Evac controller interface
100V or line level switching
Multi-zone paging
Store and recall functionality
Emergency override paging
Frequently asked questions
The maximum distance between the A 4585 and a paging console is 300 meters.
A maximum of eight consoles can be connected to the A 4585 but only used in certain configurations. Without the aid of external power supplies, a maximum of four consoles can be connected, with one console per RJ45 port.
The emergency override feature allows for immediate paging to all zones in the event of an emergency.