Open architecture solution
OEM Software with AD Series wireless and hardwired locks
Overview
The AD Series electronic locking platform is designed to be open and flexible. With its open architecture, the AD Series can be seamlessly integrated into most access control systems.
Schlage AD Series electronic locks combine all of the components typically found around the door; such as the reader, door position switch and the request-to-exit switch into one device; which simplifies installation and saves money.
Schlage AD Series electronic locks are available in hardwired and wireless configurations.
The AD-300 locks are hardwired and provide the benefits of a traditional access control solution. The AD-400 locks are wireless and provide many of the key benefits without having to run wires directly to each opening.
The AD Series can be customized with seven (7) different credential reader options including keypad, magnetic stripe, and multi-technology which reads both proximity and smart cards. All card readers are available with keypad for multi-factor authentication, support is dependent on access control software. Designed to be modular, readers can easily be upgraded in the future to meet your changing credential needs.
System capabilities
Summary
§ System capabilities:
− As determined by OEM software provider
§ AD-400 wireless applications:
− Communicates to the controller via
PIM400-TD2 (Wiegand or Clock & Data); each supports up to 2 devices
− 900 MHz communication between
AD-400 and PIM400 for secure, AES-128 bit encrypted transmission
− Patent-pending wireless lockdown feature
(10 seconds or less) preserves up to 2 year battery life
§ AD-300 hardwired applications:
− Communicates to the controller via
PIB300-2D (Wiegand or Clock & Data); each supports up to 2 devices
§ AD Series available with seven reader options and three chassis options shown on page 4
§ ANSI/BHMA A156.25, ANSI/BHMA Grade 1,
UL 294, UL 10C
AD-300 hardwired Wiegand system
OEM system
LAN
OEM controller with Wiegand protocol port
Wiegand or
Clock & Data protocol
RSI protocol
PIB300-2D
(Panel Interface Module)
AD-300 hardwired devices
(up to 2 devices)
OEM system
LAN
OEM controller
OEM protocol port
RS485
OEM reader interface
Wiegand or
Clock & Data protocol
RSI protocol
PIB300-2D
(Panel Interface Module)
AD-300 hardwired devices
(up to 2 devices)
AD-400 wireless Wiegand system
OEM system
LAN
OEM controller with Wiegand protocol port
Wiegand or
Clock & Data protocol
900 MHz
PIM400-TD2
(Panel Interface Module)
AD-400 wireless devices
(up to 2 devices)
OEM system
LAN
OEM controller
OEM protocol port
RS485
OEM reader interface
Wiegand or
Clock & Data protocol
900 MHz
PIM400-TD2
(Panel Interface Module)
AD-400 wireless devices
(up to 2 devices)
Note:
Complete specifications and certifications are detailed on individual data sheets which can be found on www.schlage.com/support.
For additional information contact 1-877-671-7011 or visit www.allegion.com/us
System capabilities:
Features:
Number of wireless devices per PIM400
Number of locks per PIB300
Other Requirements
RLBD Dry Contact Relay Board 1
Reader interface/gateway
Readers (see supported credential formats below):
Keypad only
Magnetic stripe card
Multi-tech - 125 kHz prox & 13.56 MHz smart card
PIV & PIV-I card compatible 2
Card + PIN
Status monitors 4
Request to exit
Door position switch
Interior cover tamper guard
Lock/unlock status clutch position
Mechanical key override (ATK)
Request to enter
Low battery status
Battery voltage level
Communication status
Remote lockdown/unlock (1) single device
Remote lockdown/unlock >1 device
Deadbolt position
Interior push button
Lock functions
Classroom/storeroom
Please contact
1-877-671-7011 for additional details on features and credentials supported.
AD-400
PIM400-TD2
Up to 2
N/A
AD-300
PIB300-2D
N/A
Up to 2
Consult your access control system provider for capability
Consult your access control system provider for capability
Yes
Yes
Yes
Yes, with FMK reader
Yes
Yes
Yes
Yes, FMK reader
Consult your access control system provider for capability
Yes
Yes
Yes
No
No
Consult system provider
Consult system provider
No
Yes
Yes (<10 secs) 3
Yes (<10 secs) 3
No
No
Yes
Yes
Yes
No
No
Consult System Provider
N/A
N/A
Yes
Yes
Yes
No
No
Yes Yes
Supported card formats
Proximity cards (125 kHz):
§ AWID ®
§ GE/CASI ®
§ HID ®
§ Schlage ®
§ XceedID ®
Smart cards (13.56 MHz):
§ aptiQ™ MIFARE Classic
§ aptiQ™ MIFARE DESFire™ EV1
§ PIV and PIV-I compatible 1
Smart cards (13.56 MHz) - reads card serial number only:
§ HID iCLASS ®
§ DESFire ®
§ MIFARE ®
§ MIFARE DESFire™ EV1
1 Requires RLBD Dry Contact Board for supervised inputs and to create dry contact outputs. If supervised inputs are required our optional plugin relay board (RLBD) is required for the
PIM400-TD2 and PIB300-2D. Consult with access control provider to determine if dry contacts or RLBD is required.
2 FIPS 201-1 Compliant option available: The AD Series can be used in applications which require approval by the U.S. Federal Government under HSPD-12 for FIPS 201 Compliance. Specific components are required, please see the AD-401 data sheet or AD-301 data sheet for complete details. Contact your system provider to confirm they are able to support your FIPS 201-1 credential format.
3 Wake-up on Radio over PIM400-TD2 on up to 2 doors requires configuration via SUS.
For additional information contact 1-877-671-7011 or visit www.allegion.com/us
Available AD Series reader modules
Multi-technology
§ Proximity
§ Smart card
+ KEYPAD
FIPS 201-1 compliant option available (FMK)
Multi-technology
§ Proximity
§ Smart card
Magnetic stripe
(insertion)
+ KEYPAD
Magnetic stripe
(insertion)
Magnetic stripe
(swipe)
+ KEYPAD
Magnetic stripe
(swipe)
Keypad
Compatibility
AD Series electronic locks from Schlage are built from the ground up to provide more options, more functionality and more compatibility than any other solution on the market today. Designed to suite with the most popular lever styles and finishes,
Schlage AD Series locks can be configured to accept most major key systems. See lever and cylinder compatibility data sheet (010432).
Mortise Lock
(AD-300/400-MS)
Cylindrical Lock
(AD-/300/400-CY)
Exit Device Trim
(AD-300/400-993)
Handheld device
(HHD)
Used to initialize, configure, and test
AD Series Devices
The AD Series exit trims are exclusively compatible with exit devices made by Allegion when using the low current request to exit switch
(RX-LC part # 050281 for Von Duprin 98/99 &
Von Duprin 22/22F Rim/SVR devices and part number 650359 for Falcon 25 Rim devices).
Lever styles
Standard cylinders shown, SFIC and FSIC also available.
Finishes
Warm tone finishes Cool tone finishes
Sparta Rhodes 605
Bright brass
606
Satin brass
612
Satin bronze
643e
Aged bronze
619
Satin nickel
625
Bright chrome
626
Satin chrome
626AM
Satin chrome with antimicrobial
Athens Tubular
Allegion, the Allegion logo, Schlage, the Schlage logo, Von Duprin, Falcon, and aptiQ are trademarks of Allegion plc, its subsidiaries and/or affiliates in the United States and other countries. All other trademarks are the property of their respective owners.
About Allegion
Allegion (NYSE: ALLE) creates peace of mind by pioneering safety and security. As a
$2 billion provider of security solutions for homes and businesses, Allegion employs more than 8,000 people and sells products in more than 120 countries across the world. Allegion comprises 27 global brands, including strategic brands CISA ® ,
Interflex ® , LCN ® , Schlage ® and Von Duprin ® . For more, visit www.allegion.com.
© 2014 Allegion
000076, Rev. 02/15 www.allegion.com/us
For additional information contact 1-877-671-7011 or visit www.allegion.com/us
