- Sports & recreation
- Camping, tourism & outdoor
- Camping, tourism & outdoor cookware
- Cool boxes
- User manual
advertisement
CELLFLEX
®
and CELLFLEX
®
Lite
Transmission Lines
Optimizing network build-outs and operational performance through constant innovation
T h e C l e a r C h o i c e
®
2
CELLFLEX
®
and CELLFLEX
®
Lite
The industry’s most advanced transmission-line family
The CELLFLEX
®
and
CELLFLEX
®
Lite duo make up the largest corrugated transmission line portfolio in the wireless infrastructure industry.
The foam dielectric cables combine remarkable fl exibility with high strength and superior electrical performance.
A comprehensive transmission line portfolio to fi t every need
This premium transmission line family is backed by a complete line of accessories common to both the copper and aluminum products, including the renowned OMNI
FIT
™
connector range.
CELLFLEX
®
cables provide a reliable and technically superior solution when used as backbone feeders in cellular radio systems, including GSM, UMTS, CDMA, PDC and
LTE, as well as WIMAX. Other common uses for the CELLFLEX
®
family include the cabling of antenna arrays, radio equipment interconnections and jumper assemblies.
20 unique CELLFLEX
®
types, ranging from 1/8” to 2-1/4”, provide users a perfect match for the most complicated and demanding applications. Every cable comes with a guarantee of reliability, performance and cost-effectiveness from the most experienced and innovative cable manufacturer in the world – Radio
A tradition of continuous innovation
Designing better performing, more durable and lighter cables is part of RFS’ long tradition of innovation leadership. The
Hackethaldraht Company – RFS’ direct predecessor – was established in Hanover,
Germany on September 29, 1900, and was responsible for many transmission-line fi rsts.
An important milestone was set in
1951 with the invention of corrugated, longitudinally welded coaxial cables. This technology gave way in 1962 to the launch of foam dielectric coaxial cables by the then renamed Kabelmetal Corporation.
CELLFLEX
®
would quickly become the preferred cable choice for mobile communication base station applications.
The original CELLFLEX
®
cable provides the design basis for the extremely lightweight
CELLFLEX
®
Lite cable, which features a corrugated aluminum outer conductor.
Today, RFS’ premium attenuation, low-loss
CELLFLEX
®
cable continues to lead the industry in electrical performance.
CELLFLEX
®
Lite
RFS’ aluminum cable – best value for money
World’s fi rst aluminum cable
The most stringent reliability requirements
CELLFLEX
®
Lite is a foam dielectric corrugated coaxial cable with an aluminum outer conductor and a copper inner conductor.
With its low weight, CELLFLEX
®
Lite is easy to transport, handle and install. It has become a preferred option for the rapid rollout of wireless network infrastructure around the world.
Freed from the unpredictable market price of copper, CELLFLEX
®
Lite offers an attractive price point and performance combination for establishing RFS base-station-to-antenna links while meeting budget targets during network rollouts.
Unlike alternative constructions, RFS’ corrugation technology allows CELLFLEX
®
Lite cables to bend easily without risk of damage, even against strong bending forces. This feature, coupled with its lightweight design, allows for fast installation, reduced tower load and makes it ideal for congested tower-top applications.
CELLFLEX
®
Lite delivers world-class attenuation, return loss and intermodulation performance. The electrical performance of
CELLFLEX
®
Lite aluminum cables is equivalent to or superior than that of most other brands’ copper transmission cables.
Copper cable theft has become a severe problem for mobile operators worldwide. With its aluminum outer conductor construction,
CELLFLEX
®
Lite is less attractive to thieves, making it an ideal alternative to copper cables.
To deter theft, RFS clearly marks each meter of CELLFLEX
®
Lite cable with the words “RFS
ALUMINIUM”.
Simulation of Accelerated Lifetime
Qualifi cation tests are performed on
CELLFLEX
®
Lite cables according to international standards. These tests confi rm that the cables maintain outstanding product performance after mechanical and environmental stresses.
The conditions applied during the tests are even more severe than those experienced in real-life applications and simulate many years of use.
Simulation of accelerated lifetime
Numerical modeling of mechanical and electro-magnetic properties
performance. Jumper cables are primarily used between main feeders and antennas, main feeders and systems equipment or Remote Radio Heads (RRHs) and antennas.
RFS Factory-Fit Jumpers feature soldered connectors to ensure long-term product durability and best-in-class intermodulation performance. Jumper assemblies with one connectorized side complement the portfolio, providing higher fl exibility in terms of length and on-site interface options.
Depending on the jacket option, jumper cables are suitable for indoor and outdoor applications and can withstand severe environmental conditions. Jumper assemblies are designed to the
IP68 classifi cation, providing safety even if humidity reaches the coaxial system.
CELLFLEX® jumper cables offer:
Excellent contact force
Low and stable intermodulation to Third-Order
Intermodulation (IM3) levels
Highly effective radio frequency (RF) screening
Safe operation to IP68 classifi cation levels
3
Thinking ahead with CELLFLEX
®
and CELLFLEX
®
Lite:
Corrugated cables
4
Based on several decades of engineering expertise in cable manufacturing, RFS offers cables with an advanced corrugation profi le. Unlike alternatives, this profi le enables CELLFLEX
®
copper and CELLFLEX
®
Lite aluminum cables to bend easily without risk of damage due to strong bending forces. These cables are used for state-of-the-art transmission lines and built to meet diverse installation requirements.
CELLFLEX
®
key features and benefi ts
RFS’ corrugated cable family was to provide best-in-class Passive and to be ready for PIM site cables also help customers achieve their environmental objectives.
Extremely low attenuation values
High fl exibility
Available with UV-resistant black-colored or gray-colored jackets
High screening effectiveness
Rugged design
Corrugated conductors
Excellent return loss
Corrugated conductors
the market. CELLFLEX
CELLFLEX
®
®
and
Lite do not feature
Permits long cable lengths for reliable installation on high towers, ensuring that link budget targets can be met
Easy handling facilitates quick installation
Choice of UV-resistant color – low visual impact
No distortion of neighboring systems
Resists extreme weather conditions and harsh environments
Standard procedures for connectorization – no additional tools or training needed
Perfect solution for highly sensitive applications
Standard procedures for connectorization, easy to install, ensuring superior PIM performance
CELLFLEX
®
Lite key features and benefi ts
Lightweight transmission-line solution
Provides a cost-effective alternative to copper transmission lines
Is offered in diameter sizes from 1/2’’ to 1-5/8’’
Offers user-friendly compatibility with RFS’ proven range of accessories.
OMNI FIT™ connectors can be used with both copper and aluminum cables
Enables trouble-free installation and operation
Boasts an attenuation of less than 6.25dB/100m @ 2 GHz (valid for 7/8”)
Specially developed connectors provide low and stable intermodulation performance
Is available with UV-resistant polyethylene or fl ame-retardant jackets
Has a return loss performance equal to that of copper cables from competing cable suppliers
Easy to transport, handle and install. Rapid rollout of wireless network infrastructure possible: fi rst to market. Savings in shipping costs.
Reduced CAPEX spending
Covers the majority of applications
Less inventory, reduced operating working capital (OWC)
No downtime, reduced risk
Uninterrupted coverage
No sensitivity degradation of the base station system.
No dropped calls
Choice of standard halogen-free or fl ame-retardant jacket options
Continuous premium antenna system performance
OMNI FIT™ connectors:
Two totally compatible connector families
Full copper and aluminum compatibility
RFS connectors are designed for high performance, easy installation and full compatibility. The entire range of the breakthrough OMNI FIT
™
Premium and
OMNI FIT
™
Standard connectors work with both copper and aluminum cables.
A given connector, for example, adapts to four different 7/8-inch cable types, providing considerable savings and reducing installation errors. To achieve the best possible PIM performance, the cable type and connector should match.
A perfect complement to the CELLFLEX
® transmission line range, OMNI FIT
™ connectors provide users with familiar connection options, premium electrical characteristics and reliable, long-life use.
Full copper and aluminium compatibility
OMNI FIT
™
connectors
Premium
OMNI FIT
™
Premium, RFS’ line of premium RF connectors, features design breakthroughs for best-in-class performance and value. OMNI FIT™
Premium ensures hassle-free installation, safe sealing and the best PIM levels in the industry.
The product of intense research,
OMNI FIT
™
Premium connectors integrate groundbreaking concepts in connector design. A new high-tech polymer claw replaces the machined brass version.
The dual-grip function on the outer conductor ensures best-in-class PIM performance under static and dynamic conditions. The high-tech polymer claw is a low-friction component for easier installation and no risk of corrosion.
OMNI FIT
™
Premium offers a fi ve-point watertight design, including a unique new 360-degree compression-method sealing process for the cable jacket.
These connectors provide such a secure, watertight seal that no additional weatherproofi ng is needed.
The unique sealing process and the dual-grip function of the new polymer claw ensure long-term premium Voltage
Standing Wave Ratio (VSWR) and PIM performance. This helps to avoid diffi cultto-detect, latent failures in the RF path that gradually degrade network quality over time. Operators save time and money, leading to reduced total cost of ownership.
OMNI FIT
™
connectors
Standard
RFS’ OMNI FIT
™
Standard connectors are designed to provide standard VSWR performance while ensuring excellent
PIM performance. The connectors offer a cost-effective, high-quality connectorto-cable interface for easy, fast and safe connector attachment.
5
CELLFLEX
®
and CELLFLEX
®
Lite
User-friendly accessories
CELLFLEX
®
and CELLFLEX
®
Lite cables are hoisting grips.
All CELLFLEX
®
and CELLFLEX
®
Lite accessories
6
RFS’ new EMP protector is LTE-ready
Omnifit 8pp Flyer DRAFT_7_Layout 1 08/12/2011 16:12 Page 1
OMNI FIT™ Connectors and Universal Trimming Tools
Flexible tool options for fully compatible connectors
RADIO FREQUENCY SYSTEMS
T h e C l e a r C h o i c e ®
Omnifit 8pp Flyer DRAFT_7_Layout 1 06/12/2011 16:26 Page 2
OMNI FIT
™
Standard
OMNI FIT™ connector families
RFS connectors are designed for high performance, easy installation and full compatibility throughout the CELLFLEX
®
family. The entire range of innovative OMNI FIT™ Premium and OMNI
FIT™ Standard connectors work with both copper and aluminum cables. A perfect complement to the CELLFLEX
®
transmission line range, OMNI FIT™ connectors provide users with familiar connection options, premium electrical characteristics and reliable, long-life use.
OMNI FIT™ Standard connectors
RFS’ OMNI FIT™ Standard connectors are designed to meet and exceed industry standard Voltage Standing Wave Ratio (VSWR) and PIM performance. The connectors offer a cost-effective, high-quality connector-to-cable interface for easy, fast and safe connector attachment.
Characteristics of OMNI FIT™ Standard connectors
Cost effective two-piece design for safe and easy installation
Compatible with copper and aluminum cable types, one connector for both outer conductor materials eliminates the risk of faulty connector installation and helps to keep inventory down
Robust mechanical design for low and consistent intermodulation performance, maintains mobile network performance, reducing the number of dropped calls and avoids revenue losses
Consistent standard electrical performance improves network system performance
RoHS (EU) and CRoHS (China) compliant, can be used on a global basis
Waterproof to IP 68 – no downtime risk, secures revenue
The O-ring seals against the outer conductor – in line with the
RFS sealing concept
Additional sealing for added protection is available from RFS.
OMNI FIT™ Standard connectors
Body Back-nut Threaded gasket Heat shrink sleeve Body Spring O-Ring or C-Ring Back-nut O-Ring
2
OMNI FIT™ Standard for SCF 12 OMNI FIT™ Standard for LCF 12 up to 158
Omnifit 8pp Flyer DRAFT_7_Layout 1 06/12/2011 16:27 Page 3
OMNI FIT
™
Premium
OMNI FIT™ Premium connectors
OMNI FIT™ Premium, RFS’ line of premium RF connectors, feature design innovations for best-in-class performance and value. OMNI FIT™ Premium ensures hassle-free installation, safe sealing and industry best PIM levels. These connectors provide such a secure, watertight seal that no additional weatherproofing is required. The unique sealing process and the dual-grip function of the high-tech polymer claw ensures long-term premium VSWR and
PIM performance. This helps avoid difficult-to-detect, latent failures in the RF path that gradually degrade network quality over time. Operators save time and money, leading to reduced total cost of ownership.
Characteristics of OMNI FIT™ Premium connectors
Innovative two-piece, multi-thread design for safe and easy installation
Compatible with copper and aluminum cable types, one connector for both outer conductor materials eliminates the risk of faulty connector installation and helps to keep inventory down
Dual-grip design on the corrugated outer conductor for enhanced stability – virtually eliminates any risk of potential PIM and avoids electrochemical potentials, ensures mobile network performance, reducing the number of dropped calls and avoids revenue losses
Unique plating combines superior electrical performance with long lasting shiny appearance
RoHS (EU) and CRoHS (China) compliant, can be used on a global basis
Waterproof to IP 68 – no downtime risk, secures revenue
EPDM O-ring prevents water migration due to jacket imperfections
No additional sealing required
The new 360° compression design provides an extreme watertight seal to the cable jacket and improves mechanical stability.
Exceeds even the strongest dynamic PIM specifications, fit for on-site PIM testing
OMNI FIT™ Premium connectors
Body Back-nut Body Adjustment marks Back-nut
Unique
Plating
Interface sealing
360° metal-tometal contact
High-tech
Polymer claw
EPDM O-ring
EPDM O-ring prevents water migration
(>1/2”)
New 360° compression design
OMNI FIT™ Premium for LCF 14 up to 158
OMNI FIT™ Premium for SCF14 up to SCF12
3
Omnifit 8pp Flyer DRAFT_7_Layout 1 07/12/2011 16:57 Page 4
Universal Tools for
CELLFLEX
®
cables and connectors
The Universal Trimming Tool Series prepares foam-dielectric coaxial cables for connector attachment. The integrated chamfer and flare station eliminates the need for individual tools for jacket trimming, deburring and proper flaring. Each tool contains two preset cutting blades designed to efficiently trim the outer conductor and foam dielectric for proper connector installation. It also identifies the cable jacket cut back position.
The tool series offers the additional advantage to be convertible to different connector families and cable sizes by changing the insert.
Different inserts are available as optional orderable items.
Universal Tool for cable sizes up to 7/8“
TRIM-SET-***-*** tool complete with one set of inserts
Universal Tool for cable sizes 1-1/4” & 1-5/8”
TRIM-SET-L***-*** tool complete with one set of inserts
4
TRIM-FL**-** single flaring chamfer tool TRIM-IL**-** single insert kit
TRIM-FL114-158
single flaring tool (spare part) TRIM-IL***-*** single insert kit
Omnifit 8pp Flyer DRAFT_7_Layout 1 08/12/2011 14:02 Page 5
Flexible options using
RFS Universal tools
CELLFLEX ® Cable Connectors Sealing method* Universal Trimming tools
Cable type Structure Family Type Sealing Sealing Universal Inserts for extension Spare
material against against Trimming tool
Single Insert Kit Single Flaring
blades outer jacket
Complete with inserts (upper & lower) tool
conductor
SCF14-50J Cu D01 OMNI FIT™ Threaded 360º TRIM-SET-S14-D01 TRIM-IS14-D01
not required
TRIM-B30
SCF14-50JFN
Premium Connector
gasket compression
001 & 045 Cut & FIT Heatshrink Heatshrink - - - for Copper cables only sleeve sleeve
SCF38-50J Cu D01 OMNI FIT™ Threaded 360º TRIM-SET-S38-D01 TRIM-IS38-D01
not required
TRIM-B30
SCF38-50JFN
Premium Connector
gasket compression
070 & 071 RAPID FIT™ Threaded Threaded for Copper cables only gasket gasket
SCF12-50J Cu D01 OMNI FIT™ Threaded 360º TRIM-SET-S12-D01 TRIM-IS12-D01
not required
TRIM-B30
SCF12-50JFN
Premium Connector
gasket compression
C02 OMNI FIT™ Threaded Heatshrink TRIM-SET-S12-C02 TRIM-IS12-C02
not required
TRIM-B30
Standard Connector
gasket sleeve
070 & 071 RAPID FIT™ Threaded Threaded TRIM-SET-S12-D01 TRIM-IS12-D01
not required
TRIM-B30 for Copper cables only gasket gasket
LCF14-50J Cu D01 OMNI FIT™ O-Ring 360º TRIM-SET-L14-D01 TRIM-IL14-D01 TRIM-FL14-12 TRIM-B30
LCF14-50JFN
Premium Connector
compression
070 & 071 RAPID FIT™ O-Ring Heatshrink - - - -
& 075 for Copper cables only
sleeve
LCF38-50J Cu 070 & 071 RAPID FIT™ O-Ring Heatshrink - - - -
LCF38-50JFN for Copper cables only
sleeve
LCF12-50J Cu D01 OMNI FIT™ High-tech polymer TRIM-SET-L12-D01 TRIM-IL12-D01 TRIM-FL14-12 TRIM-B30
LCF12-50JFN and
Premium Connector
360º compression
LCF12-50JL
Al
LCF12-50JFNL
C02 OMNI FIT™ O-Ring Optional** TRIM-SET-L12-C02 TRIM-IL12-C02 TRIM-FL14-12
Standard Connector
TRIM-B30
B32 OMNI FIT™ O-Ring Optional** TRIM-SET-L12-D01 TRIM-IL12-D01 TRIM-FL14-12 TRIM-B30
Standard Connector
LCF12-50J Cu 060 & 061 RAPID FIT™ PLAST 2000 PLAST 2000 TRIM-SET-L12-D01 TRIM-IL12-D01 TRIM-FL14-12 TRIM-B30
LCF12-50JFN for Copper cables only (not included) (not included)
070 & 071 RAPID FIT™ O-Ring Optional** for Copper cables only
* Note: The RFS sealing concept is to always seal against the cable outer conductor for optimum sealing and guaranteed system integrity.
Using additional sealing for standard connector families is up to the end user. It is ensured by the integrated 360° compression sealing for premium connector families.
** Note: To be provided on site based on customer choice and preference. Mandatory for Aluminum cables.
5
Omnifit 8pp Flyer DRAFT_7_Layout 1 08/12/2011 14:03 Page 6
Flexible options using
RFS Universal tools
6
CELLFLEX ® Cable Connectors Sealing method* Universal Trimming tools
Cable type Structure Family Type Sealing Sealing Universal Inserts for extension Spare
material against against Trimming tool
Single Insert Kit Single Flaring
blades outer jacket
Complete with
conductor
inserts
(upper & lower) tool
LCF78-50JA Cu D01 OMNI FIT™ O-Ring 360° TRIM-SET-L78-D01 TRIM-IL78-D01 TRIM-FL78 TRIM-B30
LCF78-50JFNA and
Premium Connector
compression
LCF78-50JL
Al
C02 OMNI FIT™ O-Ring Optional** TRIM-SET-L78-C02 TRIM-IL78-C02 TRIM-FL78 TRIM-B30
LCF78-50JFN
Standard Connector
UCF78-50JA
UCF78-50JL
Standard Connector
022 OMNI FIT™ O-Ring Silicone - -
Premium Connector
rubber sleeve
LCF78-50JA Cu 060 & 062 RAPID FIT™ PLAST 2000 PLAST 2000 TRIM-SET-L78-D01 TRIM-IL78-D01 TRIM-FL78 TRIM-B30
LCF78-50JFNA for Copper cables only (not included) (not included)
UCF78-50JFNA
for Copper cables only
LCFS114-50JA Cu D01 OMNI FIT™ O-Ring 360° TRIM-SET-L114-D01 TRIM-IL114-D01 TRIM-B31
LCFS114-50JFNA and
Premium Connector
compression
LCFS114-50JL
Al
C02 OMNI FIT™ O-Ring Optional** TRIM-SET-L114-C02 TRIM-IL114-C02 TRIM-B31
LCFS114-50JFNL
Standard Connector
UCF114-50JA
B32 OMNI FIT™ O-Ring Optional** TRIM-SET-L114-001 TRIM-IL114-001 TRIM-B31
UCF114-50JL
UCF114-50JFNL
Standard Connector for LCFS cables
LCFS114-50JA Cu 060 & 062 RAPID FIT™ PLAST 2000 PLAST 2000 TRIM-SET-L114-001 TRIM-IL114-001 TRIM-B31
LCFS114-50JFNA for Copper cables only (not included) (not included)
070 & 072 RAPID FIT™ O-Ring Optional**
UCF114-50JFNA
for Copper cables only
LCF158-50JA Cu D01 OMNI FIT™ O-Ring 360° TRIM-SET-L158-D01 TRIM-IL158-D01 TRIM-B31
LCF158-50JFNA and
Premium Connector
compression
LCF158-50JL
Al
C02 OMNI FIT™ O-Ring Optional** TRIM-SET-L158-C02 TRIM-IL158-C02 TRIM-B31
LCF158-50JFNL
Standard Connector
B32 OMNI FIT™ O-Ring Optional** TRIM-SET-L158-001 TRIM-IL158-001 TRIM-B31
Standard Connector
022 OMNI FIT™ O-Ring Silicone
Premium Connector
rubber sleeve
LCF158-50JA Cu 060 & 062 RAPID FIT™ PLAST 2000 PLAST 2000 TRIM-SET-L158-001 TRIM-IL158-001 TRIM-B31
LCF158-50JFNA for Copper cables only (not included) (not included)
070 & 072 RAPID FIT™ O-Ring Optional** for Copper cables only
* Note: The RFS sealing concept is to always seal against the cable outer conductor for optimum sealing and guaranteed system integrity.
Using additional sealing for standard connector families is up to the end user. It is ensured by the integrated 360° compression sealing for premium connector families.
** Note: To be provided on site based on customer choice and preference. Mandatory for Aluminum cables.
Omnifit 8pp Flyer DRAFT_7_Layout 1 06/12/2011 16:49 Page 7
Why RFS?
A worldwide leader in wireless and broadcast infrastructure
Serious about services A legacy of innovation
Radio Frequency Systems
(RFS) is a global designer and manufacturer of cable, antenna and tower systems along with active and passive RF conditioning modules, providing total-package solutions for wireless and broadcast infrastructure.
RFS serves OEMs, distributors, systems integrators, operators and installers in the broadcast, wireless communications, land-mobile and microwave market sectors.
As an ISO-compliant organization with manufacturing and customer-service facilities that span the globe, RFS offers cutting-edge engineering capabilities, superior field support and innovative product design.
Customers know they can count on RFS for comprehensive logistical capabilities, flawless execution and outstanding technical skills and support. The company’s dedicated shipment coordinators, hotline staff and on-site engineers go well beyond mere technology, striving to offer tailored solutions to meet even the most complex site-engineering and delivery challenges.
RFS’ value-added services match the exact needs of business partners large and small.
Ever-present quality guarantee
From design to manufacture, ISO 9001 and ISO 14001 certification standards encompass all aspects of RFS’ business worldwide. Every product RFS ships has stood up to the most stringent technical, environmental and quality control tests, continuously meeting and surpassing the expectations of a long list of wireless carriers, transportation and utility operators, and broadcasters.
RFS backs every product bearing its name with a quality guarantee that is unrivaled in the market.
A total commitment to design and develop the world’s most advanced technology for wireless communication has kept RFS at the forefront of the industry for more than 70 years. Dedicated R&D teams, plus a privileged partnership with Bell Labs, are at the source of breakthroughs that are ensuring the mobility of an increasingly wireless world.
RFS is at the frontier of wireless technology innovation, sustaining the boldest ventures to enhance the way people communicate and live.
A truly global company
With on-the-ground personnel in more than
20 countries and on every continent, RFS always delivers on its commitments, providing a comprehensive range of premium products, systems and services. Its clients benefit from all the advantages of a global supplier, while relying on dedicated support from RFS’ local engineering, manufacturing and shipping teams.
RFS’ products, systems and personnel can be found in every corner of the planet.
As a global group, RFS is committed to upholding the most stringent environmental, health and safety standards, and seeks to integrate green initiatives in every aspect of its business.
7
PRODUCTION ELECTRONIQUE Inc.
1035, rue Pierre‐Caisse
Saint‐Jean‐sur‐Richelieu
(Québec) CANADA J2W 0G9
: 450.359.0523
: 877‐359‐0523
: 450.359.4928
[email protected] www.productionelectronique.com
Product Data Sheet ICA12-50JPL
1/2" ClearFill
®
Line Plenum-Rated Air-Dielectric Coaxial Cable for In-Building Applications
Product Description
ClearFill®Line 1/2" low loss air dielectric cable, Plenum-rated
Application: Plenum In-Building
Features/Benefits
• Supports Multiple RF Signals
• Complete Shielding
The solid outer conductor of the ClearFill®Line coaxial cable creates a continuous RFI/EMI shield that
minimizes system interference.
• Outstanding Intermodulation Performance
RFS coaxial cable’s solid inner and outer conductors virtually eliminate intermods.
Intermodulation performance is also confirmed with state-of-the-art equipment at the RFS factory.
• Wide Range of Applications
Typical areas of application are: feedlines for plenum-space installations within
occupied buildings or structures.
Technical Features
Structure
Inner conductor:
Dielectric:
Outer conductor:
Jacket:
Copper-Clad Aluminum Wire
Extruded Polyethylene
Annularly Corrugated Copper
Plenum
Mechanical Properties
Weight, approximately
Minimum bending radius, single bending
Minimum bending radius, repeated bending
Bending moment
Max. tensile force
Recommended / maximum clamp spacing
Electrical Properties
Characteristic impedance
Relative propagation velocity
Capacitance
Inductance
Max. operating frequency
Jacket spark test RMS
Peak power rating
RF Peak voltage rating
DC-resistance inner conductor
DC-resistance outer conductor
Recommended Temperature Range
Storage temperature
Installation temperature
Operation temperature
Other Characteristics
Fire Performance: Flame Retardant, Plenum Rated
VSWR Performance:
Other Options:
Standard
[mm (in)]
[mm (in)]
[mm (in)]
[mm (in)]
[kg/m (lb/ft)]
[mm (in)]
[mm (in)]
[Nm (lb-ft)]
[N (lb)]
[m (ft)]
[Ω]
[%]
[pF/m (pF/ft)]
[µH/m (µH/ft)]
[GHz]
[V]
[kW]
[V]
[Ω/km (Ω/1000ft)]
[Ω/km (Ω/1000ft)]
[°C (°F)]
[°C (°F)]
[°C (°F)]
4.8 (0.19)
15.8 (0.623)
13.8 (0.54)
15.93 (0.627)
0.40 (0.27)
120 (5)
254 (10)
4.1 (3.0)
1112 (250)
0.5 / 0.9 ( 1.8 / 3.0 )
50 +/- 2
91
76 (23.2)
0.190 (0.058)
6
8000
21.4
1500
1.48 (0.45)
1.90 (0.58)
-15 to +85 (5 to +185)
-15 to +60 (5 to +140)
-15 to +85 (5 to +185)
[dB (VSWR)]
18 (1.228:1) in specified bands
1/2" Plenum-Rated In-Building Cable
1800
2000
2200
2300
2600
3000
3500
3600
4000
4500
5000
5500
6000
800
824
894
900
925
960
1000
1250
1500
1700
174
200
300
400
450
500
512
600
700
Frequency Attenuation
[ MHz ] [ dB/100m
0.5
1.0
]
0.148
0.210
[ dB/100ft ]
0.0452
0.0641
50
88
100
108
150
1.5
2.0
10
20
30
0.258
0.298
0.671
0.954
1.17
1.52
2.04
2.18
2.27
2.70
0.0785
0.0908
0.204
0.291
0.358
0.465
0.622
0.665
0.692
0.822
2.92
3.14
3.89
4.54
4.84
5.13
5.19
5.66
6.16
6.64
6.75
7.06
7.08
7.19
7.34
7.51
8.52
9.45
10.2
2.02
2.06
2.15
2.16
2.19
2.24
2.29
2.60
2.88
3.09
0.889
0.957
1.19
1.39
1.48
1.56
1.58
1.73
1.88
10.5
11.2
11.8
12.1
13.0
14.1
15.5
15.8
16.8
18.1
19.3
20.4
21.6
3.20
3.40
3.59
3.69
3.96
4.31
4.73
4.81
5.13
5.51
5.88
6.23
6.58
Attenuation at 20°C (68°F) cable temperature
Mean power rating at 40°C (104°F) ambient temperature
Power
[ kW ]
2.15
2.10
1.85
1.67
1.55
1.50
1.41
1.34
1.31
1.22
3.07
3.03
2.78
2.56
2.37
2.33
2.23
2.23
2.19
1.12
1.02
1.00
0.945
0.878
0.825
0.781
0.739
10.3
7.71
7.21
6.93
5.82
5.39
5.01
4.04
3.47
3.25
21.4
21.4
21.4
21.4
21.4
16.5
13.4
RFS The Clear Choice ®
Please visit us on the internet at http://www.rfsworld.com/
ICA12-50JPL
Rev: B0 / 14.June.2010
Radio Frequency Systems
PRODUCTION ELECTRONIQUE Inc.
1035, rue Pierre‐Caisse
Saint‐Jean‐sur‐Richelieu
(Québec) CANADA J2W 0G9
: 450.359.0523
: 877‐359‐0523
: 450.359.4928
[email protected] www.productionelectronique.com
Product Data Sheet HCA78-50JPL
7/8" HELIFLEX
®
Air-Dielectric Coaxial Cable
Product Description
HELIFLEX® 7/8" low loss air dielectric cable; Plenum-rated
Application: Plenum In-Building only
7/8" HELIFLEX® Air Dielectric Coaxial Cable
Features/Benefits
• Low Attenuation
The low attenuation of HELIFLEX® coaxial cable results in highly efficient
signal transfer in your RF system.
• Complete Shielding
The solid outer conductor of HELIFLEX® coaxial cable creates a continuous RFI/EMI shield that
minimizes system interference.
• Low VSWR
Special low VSWR versions of HELIFLEX® coaxial cables contribute to low system noise.
• Outstanding Intermodulation Performance
HELIFLEX® coaxial cable’s solid inner and outer conductors virtually eliminate intermods.
Intermodulation performance is also confirmed with state-of-the-art equipment at the RFS factory.
• High Power Rating
Due to their low attenuation, outstanding heat transfer properties and temperature stabilized dielectric
materials, HELIFLEX® cable provides safe long term operating life at high transmit power levels.
• Wide Range of Application
Typical areas of application are: feedlines for plenum-space installations within
occupied buildings or structures.
Technical Features
Structure
Inner conductor:
Dielectric:
Outer conductor:
Jacket:
Copper Tube
Helical Polyethylene Spacer
Corrugated Copper
Polyvinylidene Fluoride, PVDF
Mechanical Properties
Weight, approximately
Minimum bending radius, single bending
Minimum bending radius, repeated bending
Bending moment
Max. tensile force
Recommended / maximum clamp spacing
Electrical Properties
Characteristic impedance
Relative propagation velocity
Capacitance
Inductance
Max. operating frequency
Jacket spark test RMS
Peak power rating
RF Peak voltage rating
DC-resistance inner conductor
DC-resistance outer conductor
Recommended Temperature Range
Storage temperature
Installation temperature
Operation temperature
Other Characteristics
Fire Performance: Flame Retardant, Plenum Rated
[mm (in)]
[mm (in)]
[mm (in)]
[mm (in)]
[kg/m (lb/ft)]
[mm (in)]
[mm (in)]
[Nm (lb-ft)]
[N (lb)]
[m (ft)]
[Ω]
[%]
[pF/m (pF/ft)]
[µH/m (µH/ft)]
[GHz]
[V]
[kW]
[V]
[Ω/km (Ω/1000ft)]
[Ω/km (Ω/1000ft)]
[°C (°F)]
[°C (°F)]
[°C (°F)]
9.0 (0.35)
20.2 (0.79)
25.5 (1.00)
28.0 (1.103)
0.68 (0.46)
100 (4)
250 (10)
27.0 (20.0)
1600 (360)
0.5 / 0.9 ( 1.8 / 3.0 )
50 +/- 0.5
93
71.0 (21.6)
0.178 (0.054)
3
8000
73
2700
1.1 (0.34)
0.88 (0.27)
-40 to +85 (-40 to +185)
-40 to +60 (-40 to +140)
-50 to +85 (-58 to +185)
VSWR Performance: Standard [dB (VSWR)]
Typical 20.8dB (1.2:1 VSWR) or better within the operation bands of most global frequency ranges. Premium also available. Contact factory for options in your specific frequency band.
Other Options:
Frequency Attenuation
[ MHz ] [ dB/100m
0.5
1.0
800
824
894
900
925
960
1000
1250
1500
1700
174
200
300
400
450
500
512
600
700
50
88
100
108
150
1.5
2.0
10
20
30
]
0.0813
0.115
0.141
0.163
0.366
0.520
0.638
0.827
1.10
1.18
1.23
1.45
1.57
1.69
2.08
2.42
2.57
2.72
2.76
3.0
3.25
3.49
3.55
3.71
3.72
3.78
3.85
3.94
4.45
4.91
5.26
[ dB/100ft ]
0.0248
0.0351
0.0430
0.0497
0.112
0.158
0.194
0.252
0.337
0.359
0.374
0.443
0.478
0.514
0.634
0.738
0.785
0.830
0.840
0.914
0.992
1.07
1.08
1.13
1.13
1.15
1.17
1.20
1.36
1.50
1.60
Power
[ kW ]
3.71
3.66
3.37
3.12
2.91
2.86
2.74
2.74
2.69
2.65
2.59
2.30
2.10
1.97
12.1
9.11
8.49
8.15
6.92
6.39
5.94
4.84
4.17
3.93
73.0
73.0
70.9
61.4
27.3
19.2
15.7
1800
2000
2200
2300
3000
5.43
5.75
6.07
6.22
7.22
1.65
1.75
1.85
1.90
2.20
1.91
1.81
1.72
1.68
1.47
Attenuation at 20°C (68°F) cable temperature
Mean power rating at 40°C (104°F) ambient temperature
RFS The Clear Choice ®
Please visit us on the internet at http://www.rfsworld.com/
HCA78-50JPL
Rev: E0 / 09.Oct.2007
Radio Frequency Systems
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project