4-in-1 Cordless Rechargeable Shaver


Add to my manuals
7 Pages

advertisement

4-in-1 Cordless Rechargeable Shaver | Manualzz

TECHNICAL SPECIFICATION

Measurements: 55x55x165mm

Cable Length: 1.5m

Battery: NI-MH 600mAh

Input: 3V 150mAh

MEDICAL WARNING

• Consult your dental professional before you use the toothbrush attachment of this product if you have had oral or gum surgery in the previous 2 months.

• Contact your dental professional if excessive bleeding occurs after using the toothbrush attachment of this product or bleeding continues to occur after 1 week of use.

• If you have a pacemaker or other implanted device contact your physician or the device manufacturer prior to use.

• This device has been tested and is compliant with safety standards for electromagnetic devices.

• Consult your physician prior to using this device if you have medical concerns.

Est. 1992 everyday solutions

Gen us

4-in-1 Cordless

Rechargeable Shaver

INSTRUCTION MANUAL

Imported and distributed by Easylife Group Ltd, London NW1 0JP

Support Line: 0844 441 8448

For more innovative products from Easylife please visit:

www.easylifegroup.com

IN2773 © 2016 Easylife Group Ltd

Est. 1992 everyday solutions

Model No. EL2776

Please read carefully before use and keep for future reference

Support Line: 0844 441 8448

For more innovative products from Easylife please visit: www.easylifegroup.com

Pack Contents:

1. Shaving Unit

2. Main Unit

3. On/Off Button

4. Charge/Battery Indicator

5. Charging Pedestal /Cradle

6. Hair Clippers

7. Toothbrush Connector

8. Toothbrush Heads

9. Blade Oil

10. Nose Trimmer With Protection Cap

11. Cleaning Brush

12. Mains Adaptor

2

1

5

6

4

3

9

7

12

8

11

10

Est. 1992 everyday solutions

Important:

Read this user manual carefully before you use the shaver and keep this manual for future reference.

Danger

Keep the mains adapter (12) away from water.

Warning

Do not cut off the adapter to replace it with another plug.

These appliances are not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of these appliances by a person responsible for their safety.

Children should be supervised to ensure that they do not play with this product and included accessories.

Be careful with hot water when you clean the shaving heads. Always check if the water is not too hot, to prevent your hands from getting burnt.

Caution

• Never immerse charger in water or rinse entire device under the tap.

• The appliances and accessories are not dishwasher-proof.

• Always place and use the appliances on a surface that is fluid-resistant.

• Use, charge and store the shaver at a temperature between 5 o C and 35 o C.

• Only use the accessories supplied with this shaver or that have been specifically developed for this shaver.

• Do not use the appliances and accessories if they are damaged.

• If the adapter or any of the other accessories are damaged, only replace them with an approved accessory.

• Only use the Beard trimmer to trim facial hair (beard, moustache and sideburns). Do not use it to trim hair below the neckline.

• Do not use included attachments with other devices.

Support Line: 0844 441 8448

For more innovative products from Easylife please visit: www.easylifegroup.com

The Display

• Battery symbol: A blue light indicates the unit is working correctly when the device is switched on.

• Lock symbol: When charging, a red light behind the lock symbol will illuminate.

Charging

• Insert the small plug into the socket on the bottom of the shaver, then plug the adapter in the mains socket. When the shaver is charging, the ‘lock symbol’ should light up red.

• Fully charging takes approximatly 5 hours for approximatly 35 minutes of use.

• To prevent over charging, please make sure you unplug the shaver after 5 hours.

• Alternativley, you can charge via the charging pedestal. Insert the small plug into the socket at the back of the charging pedestal. Plug the adapter into a mains socket. Gentley put the shaver into the slot on the pedestal with the shaver display facing outwards. The display shows that the shaver is charging when the ‘lock symbol’ glows red.

Using Different Attachments:

With interchangeable heads, simply pull off the shaver head and replace with either the nose trimmer, beard trimmer or toothbrush by simply aligning and slotting into place.

1. Pull the shaving unit straight off the main unit.

Note: Do not twist the shaving unit when removing it from the main unit.

2. Insert the lug of the trimmer or toothbrush connector or nose trimmer into the slot in the top of the shaver Then press down to attach it to the shaver body (‘click’).

3. Press the on/off button to switch on.

Est. 1992 everyday solutions

Support Line: 0844 441 8448

For more innovative products from Easylife please visit: www.easylifegroup.com

Shaving

Skin adaptation period

Your first shaves may not bring you the result you expect and your skin may even become slightly irritated. This is normal.

Your skin and beard need time to adapt to any new shaving system.

We advise you to shave regularly (at least 3 times a week) for a period of

3 weeks to allow your skin to adapt to the new shaver. During this period, use your new electric shaver exclusively and do not use other shaving methods. If you use different shaving methods, it is more difficult for your skin to adapt to the new shaving system.

1. Press the on/off button once to switch on the shaver.

2. Move the shaving heads over your skin in circular movements.

3. Do not make straight movements.

4. Press the on/off button once to switch off the shaver.

Wet shaving

You can also use this shaver on a wet face with shaving foam or shaving gel.

To shave with shaving foam or shaving gel, follow the steps below:

1. Apply some water to your skin.

2. Apply shaving foam or shaving gel to your skin.

3. Rinse the shaving head under the tap to ensure that the shaving unit glides smoothly over your skin. DO NOT PUT THE BODY OF THE SHAVER

UNDER THE TAP.

4. Press the on/off button once to switch on the shaver.

5. Move the shaving unit over your skin in circular movements.

Note: Rinse the shaver head under the tap regularly to ensure that it continues to glide smoothly over your skin. DO NOT PUT THE BODY OF

THE SHAVER UNDER THE TAP

Est. 1992 everyday solutions

6. Dry your face and thoroughly clean the shaver after use (see ‘Cleaning and

Maintenance’ section, pg. 11).

Note: Make sure you rinse all foam or shaving gel off the shaver.

Hair Trimming

Trimming the corner and the temple

After shaving if you would like to trim the corners or temples, you can use the little trimmer at the back side of the shaver.

• Make sure the shaver is off

• To open, simply slide the button on the back of the main unit down and the trimmer will pop out.

• To close, press the cover of the trimmer back into the slot until you hear a click.

Hair Clippers

You can use the trimmer to groom your sideburns and moustache.

Do not use it to trim hair below the neckline.

The trimmer comes with a comb guide when you receive it. You can use the hair clippers either with the guide or without.

Support Line: 0844 441 8448

For more innovative products from Easylife please visit: www.easylifegroup.com

Hair Clipper

Before trimming, comb your hair as per hair growth direction.

Comb guide has two length guides,

3mm and 6mm.

Please note the number indicated is the length of hair that will remain.

3mm

6mm

Gently push a corner of the comb to remove and the marking is on the back side of the comb guide.

1. Chose the desired length and put the comb back to the trimmer until it clips securely.

2. Press the on/off button to start trimming.

3. Place the flat base of the Trimmer /comb guide against the skin.

4. Slowly slide the Trimmer Guide and Blades through hair. Repeat from different directions as necessary.

5. Repeat the same when using the trimmer without the comb guide.

Nose and Ear Hair Trimming

1. Make sure the nose or ear is clean.

2. Insert the tip of the outer blade into your nostril or aural cavity. Insert it slowly so as not to injure your nostril or aural cavity.

3. Cut the nose hair and ear hair by moving the appliance.

4. Move the trimmer slowly so as not to injure your nostril or aural cavity.

5. Cut only the nostril hair around the entrance using the tip (approx. 5mm) of the outer blade (metallic part).

6. Some trimmings may remain inside your nostril or aural cavity.

After cutting, remove them using a tissue or cloth. The outer blade surface may get a little warm during use, but performance will not be affected.

Est. 1992 everyday solutions

Support Line: 0844 441 8448

For more innovative products from Easylife please visit: www.easylifegroup.com

Using the Toothbrush

1. Make sure the shaver is off before attaching the toothbrush and adapter.

2. Insert the toothbrush into the toothbrush adapter.

3. Then firmly press the brush and adapter into the main unit until it clicks into place.

Brushing

1. Wet the bristles and apply a small amount of toothpaste.

2. Place the toothbrush bristles against the teeth at a slight angle towards the gum line.

3. Press the power on/off button to turn on.

4. Gently move the brush head slowly across the teeth in a small back and forth motion so the longer bristles reach between your teeth. Continue this motion throughout your brushing cycle.

5. After you have completed the brushing cycle, you can spend additional time brushing the chewing surfaces of your teeth and areas where staining occurs. You may also brush your tongue, with the toothbrush turned on or off, as you prefer.

Est. 1992 everyday solutions

Cleaning and Maintenance

• Always ensure the shaver is unplugged and switched off before cleaning.

Clean the shaver:

Fig. 1

• Pull open the shaving heads one by one (Fig. 1).

• Rotate and pull open the centre head last (Fig. 2).

• Tip any collected hair into a waste receptacle.

• Use the provided cleaning brush to remove any hair or residue inside the accessory.

Fig. 2

• Wash only the shaver head, not the whole body, with water (Fig. 3).

• Leave the shaving heads open to dry completely.

Nose/Ear Hair Trimmer and Hair Clippers:

• Clean the blades with the cleaning brush and tap water.

Main Unit

Fig. 3

• Only use a soft damp cloth to clean the main unit of the shaver and never immerse the whole unit in liquids.

Lubricating

• Using the supplied blade oil, lubricate the trimmer blades and shaver heads with a small drop of oil once every 6 months or when blades do not move freely.

Support Line: 0844 441 8448

For more innovative products from Easylife please visit: www.easylifegroup.com

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement