050896 Outdoor Housing for Pan/Tilt IP Camera
Package Contains: Housing x 1, Bracket x1, Power Adapter x1, Connect Cable x 1, Cover x 1, Fixing Bridge x 1, Screws
Components
STEP 1: Get the power cord and the Ethernet cable through the bracket.
STEP 2: Get power cord and Ethernet cable through out, then plug power cord into “DC 12V
IN” and plug Connect cable into “DC 12V OUT”.
STEP 3: Fix the dome on the fixing bridge.
STEP 4: Fix dome on housing via fixing bridge.
Plug in power and network cable to the dome.
STEP 5: Assemble the bracket and the housing part, then cover up tightly.
