advertisement
Bluetooth
FX30
The FX30 is a wireless headset equipped with Bluetooth technology.
It is specially designed for different kinds of Bluetooth cell phones.
How can I use my FX30 Bluetooth headset?
You can connect your FX30 headset to your mobile phone, PC or any device with Bluetooth technology that supports the Headset or the Hands free profile. This user's guide focuses on how to use the headset with your mobile phone.
You need to have a phone with built-in Bluetooth capability, or a phone with a Bluetooth adapter connected to it. When the headset is connected to your mobile phone, you can use voice control to make calls (if your phone supports this function). The phone can be tucked away in your pocket or in a bag. You can handle incoming and out going calls, and adjust the volume, using the buttons on the headset.
Buttons
Package Contents
FX30 Bluetooth Headset
USB Charger
Inter-Changeable panel
User manual
Quick Start guide
1. Fully charge your FX30
The FX30 headset comes with a built - in rechargeable battery. We recommend that you charge the battery until the headset indicator turns off before using the headset for the first time. During charging, the indicator light shows a steady red light and the headset is turned off. When the battery is fully charged, the indicator will be off. It takes 3 to 3.5 hours to fully recharge the battery. Always use the manufacturer’s charger.
2. Switch on the Headset.
Press and hold the MFB (around 5 seconds) in power off mode until LED flashes 3 times and you hear 2 short beep tones. The headset is then on.
To turn the headset off press and hold the MFB (around 4 seconds) until the LED flashes 3 times and you hear 2 short beep tones. The LED will turn off and the headset is then off.
3. Pairing the FX30 headset with a phone a. Prepare your phone according to the phone's user manual on pairing. b. Press MFB button for up to 8 seconds until the indicator light on the headset flashes blue and red alternatively. The FX30 is now in pairing mode. c. Continue according to the instructions in the phone's user manual and press yes or OK when asked if you want to pair the phone with the FX30. d. Enter passkey “0000” then press Yes or OK.
e. Your phone will confirm when pairing is complete.
You pair the headset with the phone by adding it to a list of paired devices in the phone. The two devices then recognize each other when they connect. Once you have paired your headset with the phone, you do not need to pair it again until you want to use it with another device.
4. Putting on the headset
Make sure the ear hook forms an angle of 90
Place the ear hook behind your ear
Make sure the microphone is pointing towards your mouth
Make sure the speaker is positioned as shown in the picture
Features
Bluetooth
Profiles supported
Range – up to
Security
Type of battery
V1.2
Headset & Handsfree
10 m (33 feet)
Pairing, Encryption & Authentication
Rechargeable Lithium Polymer
Talk Time- up to 5 hours
Standby Time- up to 180 hours
Charging Time
VoIP compatible
3-3.5 hours
Skype, Messenger etc…
Troubleshooting & Warning
No sound contact between headset and phone. The headset and the phone you are using with it have to be paired to recognize each other. They also have to be within range of each other. Make sure that there are no solid objects, such as walls or furniture, in between the headset and the phone.
The indicator light flashes red. This indicates that the headset has only limited talk and standby time left. Charge the headset battery for approximately 3 to 3.5 hours.
Don't expose the Headset and Charger to any liquid, moisture or humidity as they aren't waterproof.
Don't use the Headset and Charger in extreme temperatures.
If you don't use the Headset for long periods, be sure store it in a cool, dry place away from extreme temperatures and dust.
Only use the supplied manufacturer’s charger when charging the headset.
Operation Guide
FUNCTION OPERATION LED INDICATION AUDIO INDICATION
Turn on Press and hold the MFB for 5 seconds in power off mode
LED flashing blue 3 times
2 short beep tones
Turn off
Pairing
Press and hold the MFB for 4 seconds in standby mode
LED flashing red 3 times then off
2 short beep tones
1. In the power off mode press and hold the
MFB for 8 seconds
LED flashing in Blue and
Red alternatively
2. Perform a device search from the phone
3. Press the YES soft key and enter the passkey
"0000" to pair
Pairing is successful when the headset the headset with the phone indicator flashes 6 times
rapidly
Volume Adjustment
Receive Call
End Call
Press the V(+) or V(-) repeatedly to increase or decrease speaker volume
Press the MFB once
Press the MFB once
Short tones
Ringing tone stopped
A short beep tone
Voice Dialing * 1. Press MFB once
2. Say the voice tag name
A tone sounds to prompt the user to speak the name of the person he wishes to call the phone finds the entry, pauses two seconds, then places the call
Re-dialing
Reject Call
Mute
Un-mute
Power saving in standby mode
Press and hold the V(-) button around 3 seconds
1. Press and hold the MFB button around 3 seconds to reject the incoming call
Press V(+) and V(-) buttons around 3 seconds
Press V(+) or V(-) button once
Press V(+) or V(-) button once
Press V(+) or V(-) button once
Recall the last number dialed none flashing in blue or red
1 short beep tone, microphone is muted.
1 short beep tone
1 short beep tone
1 short beep tone Release power saving in power saving mode
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement