advertisement
Printing a Mounting Template
Notice
These instructions for printing a mounting template must be followed precisely. Failure to do so may result in incorrect dimensions on the template and an incorrect cutout (too large or too small) on the mounting surface of your boat.
To print the attached mounting template, check the dimensions of the template and select the appropriate size of paper. Both the length and width measurements are indicated on the template.
The paper size must be larger than the dimensions of the template. Select the paper size using the Properties button in the Adobe Acrobat print dialog box.
Select Auto-Rotate and Center to ensure the template prints in the correct orientation.
ImPoRtAnt: When printing the flush mount template, set Page Scaling in the Adobe Acrobat print dialog box to none.
Properties: Select the paper size.
Page Scaling:
Select None:
Auto-Rotate and Center:
Select with a check mark for correct orientation
Paper size (example):
Use appropriate size paper.
Notice
After printing and before cutting the mounting surface, measure the printed template to ensure both the length and the width printed at the correct size and to ensure that the dimensions of the printed template match the actual size of your mount. Garmin is not responsible for any damages or expenses resulting from a miscut mounting surface arising from a failure to follow these instructions.
400 S erieS
F luSh
M ount
t eMplate
6 1/4"
(158 mm)
5 1/2"
(140 mm)
3/8"
(10 mm)
October 2007
1/2"
13 mm
190-00757-03 Rev. A
Recommended clearance for SD card door
Débattement recommandé pour le cache de la carte SD
Spazio libero consigliato per lo sportello della scheda SD
Empfohlener Abstand für SD-Speicherkartenabdeckung
Se recomienda despejar la puerta de la tarjeta SD
Distância recomendada para a porta do cartão SD
Anbefalet fri plads til SD-kortlåg
Aanbevolen ruimte voor klepje SD-kaart
Suositeltava vapaa tila SD-korttipaikan luukkua varten
Anbefalt klaring for SD-kortdekselet
Rekommenderat utrymme för SD-kortlucka
Рекомендованное свободное пространство для открытия крышки отсека карты памяти SD
Preporučeni razmak za vrata SD kartice
Συνιστώμενο διάκενο για την θύρα της κάρτας SD
Printed in Taiwan
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement