GBC DOCUBIND P100 Operating Instructions

Operating
ai 8 Instructions
Гоосив! мо |
BINDING SYSTEM
One GBC Plaza
Northbrook, IL 60062-9656
A. GETTING STARTED
1. Push the handle (A) onto the bind-
ing rod.
2. Secure handle with screwdriver (B).
B. DETERMINE WIDTH: i
1. Set edge guide (C) to size paper
you wish to bind (117-19 ring letter
size, 11" Cover-19 ring oversized
cover, A4-21 fing).
C. PUNCHING:
1. Align sheets or cover and insert
edge to be bound into punch throal
(D).
2. Set covers flush against edge
guide and back of punch throat.
3. To punch, pull handle towards you
and down. Punches up to 12
sheets of 20 I5./830 gram paper at
once. Punch only one clear cover
set at a time to minimize jams and
excessive wear.
D. DETERMINE COMB SIZE
{.Place document including covers
under binder sizer (E).
2. Depress the binder sizer and select
a comb binding element (F) based
on size shown by guide- binds doc-
uments up to 300 pages. For best
results. always use GBC brand
=
=r
Et. CIN (G)
ya
Вл
``.
covers with GBC color coordinated
binding combs.
E. BINDING:
1. Place comb binding element behind
comb holder (G).
2. Push the handle back until the
comb binding element opens suffi-
ciently to insert your document.
3. Thread document, front cover fac-
ing down, over open binding ele-
ment fingers. Repeat for large doc-
uments as required
4. Pull the handle towards you closing
binding element.
5. Your written presentation is now
complete! Remove book by lifting
upward.
F. EMPTY CHIP TRAY:
1. Empty chip tray (H) located under
machine after repeated use.
G. SERVICE:
Should your DocuBind P100
require: service contact GBC at:
GBC; ONE BC Plaza — -
Northbrook, IL 60062-9656
1-800-790-7787
hitp://uww.generalbinding.com/opd