AL Automatic

Airless Spray Gun

Increase Production Speeds and Finish Quality in General Metal Applications

• Lightweight and compact rounded gun design

• Capable of handling high production speeds

• Durable stainless steel construction handles the toughest materials

• Fewer parts means an overall lower cost of repair

• Wide range tip line for a variety of applications

Technical Specifications and Ordering Information

Ordering Information

288048 Airless Gun

Includes GG0 precision spray tip of choice and internal filter

Manifolds (required for gun installation)

241161 Standard 1/4” npsm inlets

244930 High flow ambient manifold

ACCESSORIES

288171 Air Seal Repair Kit

239896 Fluid Seal Repair Kit

210500 In-Line Fluid Filter

Techn

Technical Specifications

Maximum fluid pressure . . . . . . . . . . . . . . .. . . . . . . . . . . 4000 psi (276 bar, 27.6 MPa)

Maximum working air pressure . . . . . . . . . . . . . .. . . . . . . . . . . 100 psi (7 bar, 0.7 MPa)

Maximum cylinder air pressure . . . . . . . . . . . . .. . . . . . . . . . . . 100 psi (7 bar, 0.7 MPa)

Minimum air cylinder actuating pressure . . . . . . . . . . . . . . . . 70 psi (4.9 bar, 0.5 MPa)

Maximum working fluid temperature . . . . . . . .. . . . . . . .. . . . . . . . . . . . . . 140°F (60°C)

Triggering speed . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . 50-70 msec (fully open or close)

Wetted parts . . . . . . . . .. . . . . . . stainless steel, carbide, UHMWPE, acetal, PEEK, PTFE

Gun weight . . . . . . .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 lb (545 g)

Dimensions . . . . .. . . 5.2 in L x 3.0 in H x 2.0 in W (135 mm L x 76 mm H x 51 mm W)

Instruction manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311053

GG0 Tip Chart

0.033 (0.838)

0.035 (0.889)

0.037 (0.940)

0.039 (0.991)

0.041 (1.041)

0.043 (1.092)

0.045 (1.143)

0.047 (1.197)

0.049 (1.245)

0.053 (1.35)

0.055 (140)

Orifice Size in (mm)

0.007 (0.178)

0.009 (0.229)

0.011 (0.279)

0.013 (0.330)

0.015 (0.381)

0.017 (0.432)

0.019 (0.483)

0.021 (0.533)

0.023 (0.584)

0.025 (0.635)

0.027 (0.686)

0.029 (0.737)

0.031 (0.787)

*Fluid Output, gpm (lpm) at 600 psi

(4.1 MPa, 41 bar)

0.053 (0.20)

0.087 (0.33)

0.13 (0.49)

0.18 (0.69)

0.24 (0.91)

0.31 (1.17)

0.39 (1.47)

0.47 (1.79)

0.57 (2.15)

0.67 (2.54)

0.78 (2.96)

0.90 (3.42)

1.03 (3.90)

1.17 (4.42)

1.31 (4.98)

1.47 (5.56)

1.63 (6.18)

1.80 (6.83)

1.99 (7.51)

2.17 (8.23)

2.37 (8.98)

2.58 (9.76)

3.02 (11.4)

3.25 (12.3)

2 to 2.5

(50)

107

109

111

115

117

4 to 4.5

(100)

209

211

213

215

217

219

221

317

319

321

323

325

327

Maximum Pattern Width at 12 in (300 mm)

6 to 6.5

(150)

8 to 8.5

(200)

10 to 10.5

(250)

12 to 13

(300)

14 to 15

(350)

307

309

311

313

315

411

413

415

511

513

515

611

613

615

713

715

331

335

417

419

421

423

425

427

429

431

433

435

517

519

521

523

525

527

529

531

533

535

617

619

621

623

625

627

629

631

633

635

733

735

737

719

721

723

725

727

729

731

539

541

543

545

547

639

643

749

553

655

16 to 17

(400)

18 to 19

(450)

815

817

819

821

823

825

827

841

917

921

923

925

927

931

933

All written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.

Call today for product information or to request a demonstration.

877.84GRACO

(1-877-844-7226) or visit us at www.graco.com/finishing

©2011 Graco Inc. Form No. 338202 Rev. B 11/11 Printed in the U.S.A.

All other brand names or marks are used for identification purposes and are trademarks of their respective owners.