Graco 344795EN-B User's Manual

Wood Finishing Solutions
A full line of applicators and spray packages for wood applications
Whether you are sealing, painting, staining or adhering,
Graco’s wood finishing equipment will suit your application!
• Designed for superior performance and reliability
• Product solutions for each stage of the wood finishing process
• Deliver material while increasing efficiency and finish quality
Spray Technologies
Fluids (viscosity)
Finish Quality
Air Spray
Compliant
HVLP
Air-Assisted
Airless
Low to Medium
Low to Medium
Low to Medium
Low to High
Medium to High
Class A Decorative
Class A Decorative
Class A Decorative
Decorative Coating
Medium to Coarse
Max Spray Rate
20 oz/min
15 oz/min
10 oz/min
35 oz/min
> 40 oz/min
Transfer Efficiency* (test standards)
ASTM D-5009
EN 13966
17 - 25%
60 - 70%
25 - 32%
70 - 78%
25 - 32%
70 - 78%
30 - 40%
75 - 85%
27 - 35%
70 - 80%
Typical Fluid Pressure**
5 - 20 psi
5 - 15 psi
4 - 10 psi
300 - 1500 psi
1000 - 2500 psi
Typical Atomizing Pressure**
10 - 60 psi
5 - 35 psi
5 - 30 psi
5 - 30 psi
0 psi
SCFM Requirements***
13 scfm
11 scfm
15 scfm
4 scfm
0 scfm
Graco Applicator
AirPro™
AirPro
AirPro
G15 or G40
XTR™
Cup Guns
Pressure Pots
Triton®
Cup Guns
Pressure Pots
Triton
Cup Guns
Pressure Pots
Triton
Merkur®
Merkur ES
Merkur
Merkur ES
Graco Fluid Transfer Technology
*Using ASTM standard - 50% is the maximum transfer efficiency due to conveyor methods of spraying. EN standard sprays on a flat panel.
**Pressure measured at the gun inlet under flow conditions. For best results, use the lowest fluid and air pressure for the job by determining flow rate and viscosity.
***SCFM requirements are shown for gun only, and are averages. Pump air consumption is approximately 1.5 scfm for diaphragm pumps, and 2-5 scfm for piston pumps.
Note: typical air compressor sizing is 1 HP per 4 scfm.
Spray Technologies
Air Spray
HVLP/Compliant
Air Assist
AirPro Spray Pattern
AirPro Spray Pattern
AA Series Spray Pattern
Airless
XTR Spray Pattern
DEFINITIONS
Air Spray/CONVENTIONAL
Air Assist
The most widely used finishing method. Referred to as an
automotive finish or Class A finish. Easy to use, flexible and
provides the finest finish quality and the lowest transfer efficiency.
Combines the hydraulic atomization of airless with the atomization
of air spray. Ideal for many finishing and coating applications, air
assist offers high production levels and a relatively smooth finish perfect for wood furniture topcoats or fabricated metal parts.
compliant
A controlled air spray technology that reduces bounceback
and overspray. The finish quality is compatible to air spray, air
consumption is lower than HVLP and the spray rates are higher
than HVLP.
HVLP
A controlled, compliant air spray technology that reduces bounceback and overspray. Finish quality is comparable to air spray,
however atomization is generally coarser and spray rates are lower.
Airless
Directs fluid under high pressure through a controlled orifice to
accomplish airless atomization. Ideal for quickly applying high
volumes of coatings to large surfaces. Most often used to apply
protective, rather than decorative coatings.
Stain Applications
NGR and non-dye stains should be applied at low pressures due to the viscosity of the materials. Below are recommendations
for low pressure equipment which will apply material with the consistency required to best enhance the wood’s color.
AirPro Spray Gun
Part #: 289109
• Conventional spray
• Pressure feed
• 0.040” nozzle
AirPro Spray Gun
Part #: 289011
• Conventional spray, gravity feed
• 0.055” nozzle
• Includes 23 oz plastic cup
Improved transfer efficiency through
reduced air consumption
Improved transfer efficiency through
reduced air consumption
Ergonomically designed for improved
operator comfort
Ergonomically designed for improved
operator comfort
Available in HVLP (289110) and
compliant (289111)
Available in HVLP (289014) and
compliant (289017)
Finex™ Spray Gun
Part #: 289244
Mini Finex Spray Gun
Part #: 289259
• Conventional spray, gravity feed
• 0.055” nozzle
• Includes 20 oz plastic cup
• HVLP, gravity feed
• 0.047” nozzle
• Includes 4 oz plastic cup
Superior value air spray gun
Superior value air spray gun
3M PPS cup compatible
3M™ PPS™ cup compatible
Available in HVLP (289239)
Optional glaze nozzle (24F733) available
Triton Air Spray Package
Part #: 289642
Triton Air Spray Package
Part #: 289635
™
™
• 100 psi fluid and air pressure
• AirPro HVLP spray gun
• Pail mount, stainless steel pump
• 100 psi fluid and air pressure
• AirPro HVLP spray gun
• Cart mount, stainless steel pump
Double diaphragm design for smooth
changeover and low pulsation
Double diaphragm design for smooth
changeover and low pulsation
Quick and easy flushing reduces
material waste
Quick and easy flushing reduces
material waste
Available with conventional (289644) or
compliant (289643) AirPro gun
Available with conventional (289637) or
compliant (289636) AirPro gun
Aluminum pump available with conventional
(289647), HVLP (289645), or compliant
(289643) AirPro gun
Aluminum pump available with conventional
(289640), HVLP (289638) or compliant
(289639) AirPro gun
2.5 Gallon Pressure Tank
Part #: 223833
Pressure Cup
Part #: 239803
• Aluminum construction
• Up to 50 psi
• Stainless steel construction
• 1 quart capacity
Dual regulators provide convenient
fluid and air control
Dual regulators provide convenient
fluid and air control
Available with single regulator (171226)
Available with single regulator (239802)
Top Coat Applications
Top coats and sealers are generally applied with medium pressure equipment due to the mil thickness required for a high quality
finish. Air assisted equipment will deliver optimal flow rates while maximizing transfer efficiency and increasing productivity.
G15 AA Spray Gun
Part #: 24C853
• Air-assisted
• HVLP compliant
• Up to 1500 psi
Merkur Spray Package
Part #: G15C09
• 15:1 air-assisted pump, 0.4 gpm
• G15 AA gun
• 25 ft hose set
Enhanced tip design provides uniform
atomization and improved finish quality
Pump outlet filter improves material
cleanliness for enhanced spray performance
Lightweight and low trigger pull for
improved operator comfort
Easy flush pump lower allows fast color
change and reduced solvent usage
Wall mount version also available (G15W07)
Merkur ES Spray Package
Part #: 24F151
• 15:1 air-assisted pump
• G15 AA gun
• 25 ft hose set
Quick flush pump reduces material and
solvent usage
5 Gallon Pail Mount Agitator
Part #: 243340
• Stainless steel agitator
• Stainless steel pail cover
• 1/4 HP air driven motor
Carbon steel 5 gallon pail cover with
stainless agitator also available (226086)
Wall mount (24F150) and stainless steel
stand (24F159) and wall (24F158) versions
also available
Adhesive Applications
Adhesive applications vary in requirements from a bead of material to a full spray pattern. Low pressure equipment will assist in
delivering the adhesive to the wood.
AirPro Spray Gun
Part #: 288982
• Conventional spray
• Pressure feed
• 0.051” nozzle
Unique aircap designed for spraying
adhesive
AirPro Pressure Tank Packages
Part #: 24C828
• AirPro adhesive spray gun
• 2.5 gallon aluminum pressure pot
• 25 foot hose set
Dual regulators provide convenient
fluid and air control
Ergonomically designed for improved
operator comfort
All written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.
Call today for product information or to request a demonstration.
877.84GRACO
(1-877-844-7226) or visit us at www.graco.com.
©2010 Graco Inc. Form No. 344795 Rev. B 11/10 Printed in the U.S.A.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.