Model B-ID

Insulated Decanter Brewer

Model B-ID

(Insulated decanter sold separately)

Digitally controlled insulated decanter brewer holds brew temperature to + 1°F throughout the brew cycle. Brew temperature, brew volume, operator defined pre-infusion/pulse brewing, and low temp/no brew are programmable from the front display.

Model B-ID

Features

• Model B-ID is a single, digitally controlled brewer that brews into a

1.9L (64oz.) stainless steel vacuum insulated decanter (decanter sold separately).

• The vacuum insulated, stainless steel decanters model

SS-1.9LR (regular) and SS1.9LD (decaf), hold freshly brewed coffee for hours without additional heat.

• Precise Brew Temperature - The brewer will hold the brew temperature to +/- 1°F during the complete brew cycle.

• Brew Volume - Can be set by ‘teach’ mode to eliminate trial-anderror set-up.

• Pulse brewing/pre-infusion - Allows the brew sequence to extract up to 20% more dissolved solids per batch of coffee. Programmable: number of pulses, pulse-on time and pulse-off time. Changing the pulse sequence does not affect the brew volume.

• Low Temp/No Brew - Allows the brew cycle to begin only when the water has reached the optimum brew temperature.

• Cycle Counter - The brewer counts the total number of brew cycles.

• Programming Lock-Out - The brewer settings can be “locked” to prevent tampering.

• Pour-Over Capability - Automatically converts to pour-over mode when the inlet valve does not sense water. Also capable of being manually set to pour-over mode through the front.

• Dual Voltage with toggle switch models are available to accept

120/240V or 120V supply

• Model B-ID-120V has a plastic brew basket.

• Warranty - 2 years parts and labor on the brewer. 4 years part warranty on the control board.

8.1

Front View

7.2

2.7

17.8

Side View

17.1

0.38 - 0.63

Specification

Electrical

Brew Capacity

(# of 1.9L insulated decanters / hour)

Water Line

Water Line Pressure

Tank Drain

Tank Size

Dimensions (H x W x D)

Ship Dimensions (H x W x D)

Weight

Ship Weight

Listings

Model B-ID

120V/ 1780W/ 14.9A

120/240V/ 3500W/ 14.6A

120/208V/ 2630W/ 12.7A

European voltages available.

@ 120V: 8

@ 208V: 12

@ 240V: 16

1/4” flare

30-80 psi

Yes

1.38 gallons

17-3/4” x 8-1/4” x 17-3/4” (45 cm x 21 cm x 45 cm) 17-3/4” x 8-1/4” x 17-3/4” (45 cm x 21 cm x 45 cm)

22” x 13” x 24” (56 cm x 33 cm x 61 cm)

28 lbs (12.7 kg)

37 lbs (16.8 kg)

UL, CUL, NSF, (CE for E models only)

Specifications are subject to improvement or change without notice.

Model B-ID-120V

120V/ 1780W/ 14.9A

@ 120V: 8

1/4” flare

30-80 psi

Yes

1.38 gallons

22” x 13” x 24” (56 cm x 33 cm x 61 cm)

28 lbs (12.7 kg)

37 lbs (16.8 kg)

UL, CUL, NSF, (CE for E models only)

Grindmaster® Coffee Grinders and Brewers • Espressimo® Espresso Machines • Crathco® Hot Beverage Dispensers

Crathco® Cold and Frozen Beverage Dispensers • American Metal Ware® Coffee and Tea Systems

Tel (502) 425-4776 • Fax (502) 425-4664 • 1-800-695-4500 (USA & Canada only)

P.O. Box 35020 • Louisville, KY 40232 • USA

© Grindmaster Corporation, 2003

PRINTED IN USA www.grindmaster.com • email: [email protected]

0905 Form # AM-200-01