Specifications
Flame Temperature
Fuel Type
2000° F
Butane
Burn Time up to 1 hour
Includes 4 nozzle tips and piezo igniter
IMPORTANT SAFETY INFORMATION
1. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
2. Use only with butane fuel.
3. Do not aim Pencil Torch at yourself, others or animals.
4. Do not aim at flammable materials.
5. Keep hands and fingers away from path of flame and from hot tip.
6. The brass components of this product contain lead, a chemical known to the
State of California to cause birth defects
(or other reproductive harm). (California
Health & Safety code § 25249.5, et seq.)
7. Use as intended only. Do not modify or use for purpose for which is was not intended.
10. Turn off after every use. Allow Pencil
Torch to cool completely before storing.
11. Do not store any flammable liquids or materials in area surrounding Pencil Torch.
12. Store Pencil Torch in a dry, safe location out of reach of children.
13. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact Harbor
Freight Tools for a replacement.
8. Keep away from children. This product is not a toy. Do not allow children to play with or near this item.
9. Inspect before every use; do not use if parts are loose or damaged. If gas odor is detected during use, immediately shut off Pencil Torch. Extinguish all open flames and, once cooled, check all connections for gas leaks.
Page 2 For technical questions, please call 1-888-866-5797.
Item 41169
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY
INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product.
1. Back-off the Nozzle Holder Bracket (2) and slide the Bracket over the Igniter Head. Make sure porcelain face of Igniter
Head remains flush with the inner edge of the Bracket (2).
Tighten the Bracket Screw until snug. Do not overtighten.
2. Thread the selected Soldering Tip (1) into the
Nozzle Holder Bracket (finger-tighten only).
Operation
Read the ENTIRE IMPORTANT SAFETY
INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product.
Note: Torch is supplied empty for safety reasons.
1. Rotate the Valve counterclockwise fully to the OFF position.
2. Turn the torch so that the fill port is on top. Add butane fuel to the fill port. Only use butane fuel with this
product! The Torch will fill with fuel in about five seconds.
3. Wipe off any spilled fuel with a cloth and allow Butane fuel to stabilize for about 5 minutes before operating.
4. To light Torch, tilt the tip upward slightly, but away from your face and any flammable objects, and then rotate the circular base counterclockwise to the ON position. Hold Torch securely and press down on Start Button to ignite the flame.
5. To turn off, slowly turn the circular base clockwise to the OFF position.
6. Allow Torch to completely cool before twisting off and changing Soldering Tip or storing.
Note: Replacement parts are not available for this item.
Butane
Cylinder (3)
Item 41169 For technical questions, please call 1-888-866-5797.
Fill Port
(in bottom)
Page 3
Soldering
Tip (1)
Nozzle
Holder
Bracket (2)
Bracket
Screw
Igniter
Head
Start
Button
Pencil
Torch
Valve
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797