Harbor Freight Tools Serpentine Belt Tool Kit Instructions And Precautions

serpentIne BeLt tooL KIt

Item 66344

InstructIons and precautIons

distributed exclusively by Harbor Freight tools ® .

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

contents

23” Handle With 1/2” Square Drive 18 mm 3/8” Drive Socket

9” Extension With 3/8” Square Drive 13 mm 3/8” Drive Wrench

15 mm 3/8” Drive Socket

16 mm 3/8” Drive Socket

14 mm 3/8” Drive Wrench

15 mm 3/8” Drive Wrench

Important saFetY InFormatIon

1. Wear ANSI-approved safety goggles and heavy-duty

work gloves during use.

2. Turn off vehicle engine and allow engine to cool before

use.

3. Inspect before every use; do not use if parts are loose or

damaged.

4. Use as intended only. Do not use as hammer, chisel, or

pry bar. Do not use extension (other than one included)

to increase torque or use on impact tool.

5. Inspect before every use; do not use if parts are loose or

damaged.

6. Keep away from children.

InstructIons

Attach extension to handle at desired angle and attach desired socket to extension. Please note: The handle must be used with the extension for proper use.