Cisco Basic Paging InformaCast Virtual Appliance Quick Start Guide

InformaCast Virtual Appliance Basic Paging®
Version 11.0.1

Quick Start Guide for a Cisco® Unified Communications Manager Environment 

May 18, 2015
Cisco Systems, Inc.
www.cisco.com
Cisco has more than 200 offices worldwide. 
Addresses, phone numbers, and fax numbers 
are listed on the Cisco website at 
www.cisco.com/go/offices.
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT
NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT
ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR
APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION
PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO
LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.
The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of
UCB’s public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE
PROVIDED “AS IS” WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED
OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL
DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR
INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of
Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use
of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples,
command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual
IP addresses or phone numbers in illustrative content is unintentional and coincidental.
© May 18, 2015 Cisco Systems, Inc. All rights reserved.
© 2015 Singlewire. All rights reserved.
InformaCast is a trademark of Singlewire Software.
All other referenced trademarks are trademarks of their respective owners and our reference to them does not imply or indicate any approval, endorsement,
sponsorship or affiliation with such owners unless such approval, endorsement, sponsorship or affiliation is expressly indicated.
Last Updated: May 18, 2015
CONTENTS
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Environments
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Troubleshooting
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Install InformaCast Virtual Appliance
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Ensure Multicast is Enabled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Install InformaCast Virtual Appliance . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Access InformaCast Virtual Appliance
. . . . . . . . . . . . . . . . . . . . . . . . 2-3
Set the System Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Integrate CUCM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Configure InformaCast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Log into InformaCast for the First Time
. . . . . . . . . . . . . . . . . . . . . . . 3-1
Change the Default Account’s Credentials
. . . . . . . . . . . . . . . . . . . . . 3-1
Configure InformaCast’s Telephony
. . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Use InformaCast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Add a Recipient Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Allow/Disable SIP Access to InformaCast
. . . . . . . . . . . . . . . . . . . . . 4-2
Add a Broadcast Dialing Configuration . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Send a Broadcast
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Upgrade InformaCast from Basic to Advanced
. . . . . . . . . . . . . . . . . . . . . 5-1
Note the Differences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Upgrade InformaCast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
Enter Your New License Key
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
Troubleshooting
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
InformaCast Virtual Appliance Basic Paging
Version 11.0.1
i
CHAPTER
1
Overview
For virtualized environments, InformaCast Virtual Appliance Basic Paging (InformaCast or Basic
InformaCast) is Singlewire Software’s IP telephony broadcast system that allows you to send a live
audio stream to Cisco IP phones. InformaCast is designed to get messages quickly to large groups of
people; when these messages are sent through InformaCast, they are called broadcasts.
This guide is designed to get you started quickly by explaining how to complete some of the most
common tasks you’ll need to get the most out of InformaCast. It is not a substitute for the larger, more
in-depth “InformaCast Virtual Appliance Installation and User Guide,” which is available through
Help | Install Guide in InformaCast.
Environments
There are three versions of this guide: one for installations using Basic Paging, one for installations
using Advanced Notification in conjunction with Cisco’s Unified Communications Manager (CUCM),
and one for installations using Advanced Notification in conjunction with a Hybrid Runtime
Environment (HRE). Please make sure you have the right version by looking at the cover page, or by
looking at the environment type printed at the bottom of every page.
The versions are both separate and overlapping. Where versions overlap, InformaCast will be used.
Where versions differ, Advanced InformaCast or Basic InformaCast will be used.
For more information, see “Licensing Information” in the “InformaCast Virtual Appliance Installation
and User Guide.”
Prerequisites
InformaCast has the following system prerequisites:
•
Compliance with the hardware requirements and port configurations as defined in the
“InformaCast Virtual Appliance Installation and User Guide”
•
A static IP address configured on the InformaCast Virtual Appliance
•
Use of supported phones if you intend to use them as broadcast recipients (click the Cisco IP
Phones link on http://www.singlewire.com/compatibility-matrix.html)
•
Use of one of the following supported browsers: Firefox 37, Chrome 42, and Internet Explorer 11
•
Multicast routing for all network segments between InformaCast and its phones
•
A Cisco Unified Communications Manager (CUCM) server (including Business Edition 6000); the
following versions are supported: 8.5.1, 8.6.2, 9.0.1, 9.1.2, 10.0.1, 10.5.2, and 11.0.1
•
Web access enabled on any Cisco IP phones working with InformaCast
InformaCast Virtual Appliance Basic Paging
Version 11.0.1
1-1
Chapter 1
Overview
•
SNMP enabled on all nodes in a CUCM cluster
•
The AXL service running on at least one server in the CUCM cluster
•
The CTIManager service running on at least one node that’s also running the CallManager service.
The CTIManager service can run on up to eight nodes in a cluster, and you should use more than
one node with this service for redundancy.
You must also know how to access to the command-line interface (bash prompt) of InformaCast,
perform basic UNIX commands, and use nano for editing files.
Tip
Singlewire recommends a screen resolution of at least 1024x768.
Troubleshooting
Your first line of support is the Help icon. Clicking it takes you to the online help system. Accessing
its dropdown menu allows you to access:
•
The online help system
•
Its FAQ section
•
Its Troubleshooting section
•
InformaCast’s Support page
For information on obtaining documentation, obtaining support, providing documentation feedback,
security guidelines, and also recommended aliases and general Cisco documents, see the monthly
What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical
documentation, at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html.
InformaCast Virtual Appliance Basic Paging
Version 11.0.1
1-2
CHAPTER
2
Install InformaCast Virtual Appliance
Many of the concepts involved in installing InformaCast Virtual Appliance require familiarity with
VMware ESXi and CUCM.
Ensure Multicast is Enabled
Multicast is communication between a single sender and multiple receivers on a network, and you must
have it enabled across your network in order for your recipients to receive the audio portion of
InformaCast broadcasts. InformaCast has no special requirements for how multicast is enabled, and
you should use your network vendor’s best practices and design considerations.
The design and configuration of multicast in your environment is outside the scope of this document,
but you may find the following resources helpful:
Caution
•
Multicast whitepaper
•
Multicast Testing Tool
Just because music on hold works on your phones does not mean that it is using multicast. Music on
hold can be used with either unicast or multicast.
Install InformaCast Virtual Appliance
Singlewire supports InformaCast Virtual Appliance on the VMware ESXi platform, which is managed
through the vSphere client.
Step 1
Download the OVA file from Cisco’s website.
Step 2
Open and log into the vSphere client.
Step 3
Go to File | Deploy OVF Template.
Step 4
Click the Deploy from File radio button, click its Browse button, navigate to where you saved the
Singlewire-InformaCast-VM.ova file (or to the OVA file on the supplied DVD), select it, and click the
Open button.
Step 5
Click the Next button three times.
Step 6
Select the network on which the new virtual machine will reside and click the Next button. It is good
practice to place the Virtual Appliance on the same VLAN as your CUCM.
Step 7
Click the Finish button. InformaCast Virtual Appliance will begin importing. When it’s finished, click
the Close button.
InformaCast Virtual Appliance Basic Paging
Version 11.0.1
2-1
Chapter 2
Install InformaCast Virtual Appliance
Step 8
Go back to your vSphere Client window and click the Hosts and Clusters icon.
Step 9
Select your host server, click the Configuration tab, and click the Virtual Machine
Startup/Shutdown link in the Software area.
Step 10
Click the Properties link in the upper right corner and select the Allow virtual machines to start and
stop automatically with the system checkbox in the System Settings area of the Virtual Machine
Startup and Shutdown dialog box.
Step 11
Scroll to the Manual Startup section of the Startup Order field, select your virtual machine (by
default, this is Singlewire InformaCast VM), and move it from the Manual Startup section to the
Automatic Startup section using the Move Up button.
Step 12
Click the OK button. The InformaCast Virtual Appliance will now start and stop automatically with
the server on which it’s housed. Now you will turn on InformaCast’s virtual machine and set its network
configuration.
Step 13
Go to View | Inventory | VMs and Templates and select your virtual machine.
Step 14
Go to Inventory | Virtual Machine | Open Console.
Step 15
Click the green arrow button to turn on the virtual machine. The Singlewire InformaCast VM console
window begins booting the virtual machine.
Once it’s finished, SwiftStart will start automatically (it only starts automatically on the initial boot).
Step 16
Click the I Agree button to accept the End User License Agreement.
Note
If you do not accept the End User License Agreement, InformaCast will not be started and you
will not be able to progress to further installation and configuration steps in this guide.
Step 17
Select the Enter Manually radio button and enter a routable IP address on your network that’s not
currently in use, a valid netmask for that IP address, its default gateway, and the IP address(es) of a DNS
server(s) on your network.
Step 18
Click the Submit button. SwiftStart will make the IP address you’ve configured/entered static and
configure your network to work with InformaCast.
Step 19
Click the Finish button and close your open console window.
InformaCast Virtual Appliance Basic Paging
Version 11.0.1
2-2
Chapter 2
Install InformaCast Virtual Appliance
Access InformaCast Virtual Appliance
Open a web browser, enter the IP address of the InformaCast Virtual Appliance (which you set in Step
17 on page 2-2, and press the Enter key. The Singlewire Start page appears and you can easily access
all of your Virtual Appliance user interfaces. You may find it helpful to both keep this tab/window open
during the time that you’re working with the Virtual Appliance and bookmark it for future use.
Set the System Time
The InformaCast Virtual Appliance’s system time is automatically set for you using the pool.ntp.org
server, but if your Virtual Appliance does not have Internet access or if you want to use your own NTP
server, you can do so.
Step 1
Click the Access Application Management Tools with Control Center link on the Singlewire Start
page.
Step 2
Click the Access System Management Tools with Webmin link.
Step 3
Enter your login credentials and click the Login button. By default, your username is admin and your
password is changeMe.
Step 4
Go to Hardware | System Time.
Step 5
Click the Time server sync tab and enter the hostname or IP address of the NTP server you want to
use in the Timeserver hostnames or addresses field.
Tip
You can also change the time at which the Virtual Appliance checks with the NTP server by
modifying the fields and radio buttons in the Minutes, Hours, Days, Months, and Weekdays areas.
Step 6
Click the Sync and Apply button to save your changes.
Step 7
Click the Change timezone tab, select your time zone from the Change timezone to dropdown
menu, and click the Save button.
Integrate CUCM
Before you can begin using InformaCast in a telephony environment, you must configure your version
of CUCM.
Tip
When naming your CUCM components, it is recommended to use a standardized name or abbreviation
so that the components will display together. For example, this documentation will use the abbreviation
of ICVA for InformaCast Virtual Appliance.
Step 1
Open a web browser and log into the administration interface of the CUCM server (the address will be
similar to https://<CUCM IP Address>/ccmadmin).
Step 2
Select Cisco Unified Serviceability from the Navigation dropdown menu and click the Go button.
InformaCast Virtual Appliance Basic Paging
Version 11.0.1
2-3
Chapter 2
Install InformaCast Virtual Appliance
Step 3
Go to Tools | Service Activation and enable the following services on your CUCM cluster node(s):
Cisco CallManager, Cisco CTIManager, Cisco AXL Web Service, and Cisco CallManager
SNMP Service.
Step 4
Go to SNMP | V1/V2c | Community String and create an SNMP community string named ICVA
with the access privilege of ReadOnly. Select the Apply to All Nodes checkbox, if possible.
Step 5
Select Cisco Unified CM Administration from the Navigation dropdown menu and click the Go
button.
Step 6
Go to System | Region and create a region. Name it ICVA, select all of your regions in the Regions
area, and select 64kbps (G.722, G.711) from the Maximum Audio Bit Rate dropdown menu. Also,
select the None radio button in the Max Video Call Bit Rate (Includes Audio) area.
Step 7
Go to System | Device Pool and create a device pool. Name it ICVA, add the ICVA region you just
created to it, select Disable from the SRST Reference dropdown menu, and select On from the Join
Across Lines dropdown menu.
Step 8
Go to Device | Trunk and click the Add New button.
Step 9
Select SIP Trunk from the Trunk Type dropdown menu, ensure that SIP appears as the Device
Protocol dropdown menu selection, and click the Next button.
Step 10
Enter a name for your SIP trunk, select the device pool you created in Step 7, and scroll down to the
SIP Information area and enter the IP address of your InformaCast server in the Destination Address
field.
Step 11
Ensure that the value in the Destination Port field is 5060, select Non Secure SIP Trunk Profile
from the SIP Trunk Security Profile dropdown menu, and select Standard from the SIP Profile
dropdown menu.
Step 12
Click the Save button.
Step 13
Go to Call Routing | Route Hunt | Route Pattern to create a route pattern that uses the SIP trunk
you just created.
Step 14
Click the Add New button, enter a route pattern in the Route Pattern field, select a route partition
that is reachable from the phones to which you will be sending DialCasts, enter a description of your
route pattern, select the SIP trunk you just created from the Gateway/Route List dropdown menu,
select the Route This Pattern radio button, select OnNet from the Call Classification dropdown
menu, and deselect the Provide Outside Dial Tone checkbox.
Step 15
Click the Save button.
Step 16
Go to User Management | User Group (or User Management | User Settings | Access Control
Group for CUCM 9.0 and later) and create an AXL user group/access control group, name it ICVA
User Group, and add the Standard AXL API Access role to it. Alternately, you may already have an
AXL user group/access control group named Standard AXL API Access with the Standard AXL API
Access role added to it, which you can also use.
Step 17
Create an application user for InformaCast broadcasts, name it ICVA InformaCast, and add this user
to the following user groups:
•
ICVA User Group (or Standard AXL API Access)
•
Standard CTI Allow Control of All Devices
•
Standard CTI Allow Control of Phones supporting Connected Xfer and conf
•
Standard CTI Allow Control of Phones supporting Rollover Mode
InformaCast Virtual Appliance Basic Paging
Version 11.0.1
2-4
Chapter 2
Install InformaCast Virtual Appliance
•
Standard CTI Enabled
Step 18
Click the Save button.
Step 19
Enable web access for your Cisco IP phones by:
•
•
Changing their enterprise phone configurations (only available for CUCM 9.x and later)
–
Go to System | Enterprise Phone Configuration.
–
Scroll down to the Web Access dropdown menu and select Enabled.
–
Click the Save button.
Changing their profiles
–
Go to Device | Device Settings | Common Phone Profile.
–
Click the Find button to display all the phone profiles of which CUCM knows or use the filter
fields at the top of the page to narrow your list of profile results before clicking the Find
button.
–
Click the Name link of the profile in which you want to enable web access. Make sure you
select the profile that applies to the phones where web access needs to be enabled. Scroll down
to the Product Specific Configuration Layout area and select Enabled from the Web Access
dropdown menu.
–
Click the Save button.
Step 20
Go to System | Enterprise Parameters and scroll down the page to the Phone URL Parameters area.
Step 21
Make a note of the URL in the URL Authentication field. You may need this in Step 8 on page 3-2.
Step 22
Enter http://<InformaCast Virtual Appliance IP Address>:8081/InformaCast/phone/auth in
the URL Authentication field, where <InformaCast Virtual Appliance IP Address> is replaced with
your Virtual Appliance’s actual IP address.
Note
The URL is case sensitive, so make sure that the I and C in the word InformaCast are
capitalized.
Step 23
Scroll to the Secured Phone URL Parameters area and enter http://<InformaCast Virtual Appliance IP
Address>:8081/InformaCast/phone/auth in the Secured Authentication URL field as well.
Step 24
Click the Save button.
Step 25
Reboot your phones. Enabling web access for your phones and setting your authentication URL both
require you to reboot your phones. There are many methods that can be used to reboot your phones.
Use your best judgment for how and when this can be done in your environment. Some possible
options for rebooting your phones include:
•
Bulk Administration Tool (BAT), which allows you to schedule your reboots for off hours and not
deal with manually executing the reboot
•
Enterprise parameters, which allows you to reboot all devices in a cluster
•
Device pools, which allow you to reboot phones on a site-by-site basis
•
Device defaults, which allows you to reboot phones by their model type
•
Individual phones, which allows you to do phone-by-phone reboots
InformaCast Virtual Appliance Basic Paging
Version 11.0.1
2-5
Chapter 2
Install InformaCast Virtual Appliance
Step 26
Test that your phones have picked up their new settings by going to Device | Phone and using the
dropdown menus and fields to filter for a phone that should have picked up your new settings. Click
the Find button.
Step 27
Click the IP address link in the IPv4 Address column. The Device Information page should open in
a new window/tab. If the webpage does not display, you most likely do not have web access enabled
for this phone (see Step 19 on page 2-5 for more information).
Step 28
Click the Network Configuration link and scroll down the page until you come to Authentication
URL. It should list the IP address you entered in the URL Authentication field in Step 22 on page 2-5.
Note
If you are using non-English locale phones, you will need to associate all of the phones to which
InformaCast could broadcast to your application user. Go to User Management |
Application User and find and access your application user. Click the Find more Phones
button in the Device Information area of the Application User Configuration page, select all
phones to which InformaCast could broadcast, and click the Add Selected button. Click the
Save button back on the Application User Configuration page. You will then need to update
JTAPI (see “Update JTAPI” in the “InformaCast Virtual Appliance Installation and User
Guide” for steps on updating JTAPI).
InformaCast Virtual Appliance Basic Paging
Version 11.0.1
2-6
CHAPTER
3
Configure InformaCast
You must log into InformaCast, change your default account’s credentials, configure InformaCast to
communicate with your phones, and update your version of JTAPI.
Log into InformaCast for the First Time
Once the Virtual Appliance is started and you’ve accessed the Singlewire Start page, you can log into
InformaCast.
Step 1
Click the InformaCast link on the Singlewire Start page. A separate tab/window opens to
InformaCast’s Startup page. Depending on your system, there may be a delay of several minutes while
InformaCast initializes. Once InformaCast initializes, you will be presented with InformaCast’s Login
page.
Step 2
Enter admin in the Login field and changeMe in the Password field. Both fields are case sensitive.
Step 3
Click the Log In button. The InformaCast homepage appears.
Tip
Initially configuring InformaCast can take some time. The default settings for the web interface
will log you out after five minutes. Go to Admin | Network Parameters | Session Timeouts
and change the General Session Timeout (seconds) field from 300 (i.e. 5 minutes) to
something higher (e.g. 900 or 1800, which is 15 minutes or 30 minutes).
Change the Default Account’s Credentials
InformaCast ships with a default administrative user, admin, so that you can log in and configure the
system. You need to change this user’s password to avoid the security risks associated with hard-coding
this password for every InformaCast installation.
Step 1
Go to Admin | Change Password.
Step 2
Enter the current password in the Current Password field.
Step 3
Enter your new password in the New Password and Confirm Password fields. Choose a password
that you will be able to remember (or record it in a secure location).
InformaCast Virtual Appliance Basic Paging
Version 11.0.1
3-1
Chapter 3
Configure InformaCast
Step 4
Click the Update button. You have now established a new password that you will use (along with the
admin username) to log into InformaCast.
Configure InformaCast’s Telephony
Once you’ve installed InformaCast, you must configure its communication with CUCM.
Step 1
Go to Admin | Telephony | CUCM Cluster and click the Edit button next to Default
Configuration.
Step 2
Enter the application user’s username in the Communications Manager Application User field. You
created this user in Step 17 on page 2-4.
Step 3
Enter the application user’s password in the Communications Manager Application Password and
Confirm Application Password fields.
Step 4
Make sure the Use Application User for AXL checkbox is selected, meaning that your application
user credentials are used when building InformaCast’s phone cache.
Step 5
Enter your AXL IP address(es) in the AXL IP Address(es) field. Separate addresses with commas. If
you leave this field blank, InformaCast will attempt to find a server running the AXL service among
those servers running the CallManager service.
Tip
You can find which cluster members are running the AXL service by logging into your CUCM,
selecting Cisco Unified Serviceability from the Navigation dropdown menu, and going to
Tools | Service Activation. Scroll down the Service Activation page to see whether the Cisco
AXL Web Service checkbox is selected.
Step 6
Enter the IP address of the CUCM server(s) in the Communications Manager IP Address(es) field,
which will be used when establishing a CTI (JTAPI) connection with CUCM. You can enter any and
all CUCMs running the CTI Manager service. Use the numeric IP addresses rather than DNS names.
Caution
InformaCast Basic Paging requires that your version of CUCM be 8.6 or newer. After completing the
fields on the Edit Telephony Configuration page and clicking the Update button, InformaCast will
determine your version of CUCM based on what you entered in the Communications Manager IP
Address(es) field. If you have CUCM 8.6 or newer, you can continue using InformaCast Basic Paging.
If you have a version of CUCM prior to 8.6, you will be redirected to a new page where you can decide
between the following options: click the Try icon and start your 60-day free trial of InformaCast
Advanced Notification or click the Buy icon to obtain a demonstration, subscription, or perpetual
license for InformaCast Advanced Notification.
Step 7
Enter the appropriate name in the SNMP Community Name and Confirm SNMP Community
Name fields (you created this in Step 4 on page 2-4).
Step 8
Enter the original value of CUCM’s URL Authentication field in the Next Authentication URL
field. You made note of this in Step 21 on page 2-5.
Step 9
Click the Update button on InformaCast’s Edit Telephony Configuration page.
InformaCast Virtual Appliance Basic Paging
Version 11.0.1
3-2
Chapter 3
Configure InformaCast
Step 10
Refresh your recipient group list by clicking the refresh the Recipient Group list link.
Step 11
Click the Update button.
Step 12
Click the Update button again.
InformaCast Virtual Appliance Basic Paging
Version 11.0.1
3-3
CHAPTER
4
Use InformaCast
In order to effectively use InformaCast, it is useful to understand the following terms:
•
A broadcast is an audio message that is sent to phones.
•
A message contains the audio that will be broadcast.
•
A recipient is an endpoint such as a digital phone. More than one recipient can be organized into
recipient groups.
Add a Recipient Group
If you’d like to be able to send messages to smaller groups of recipients (rather than all the endpoints
in your system), you must set up appropriate recipient groups within InformaCast. There are three ways
to create a recipient group:
•
Select the recipients you want included as members
•
Select multiple, existing recipient groups and combine them into one larger group
•
Construct matching rules that specify the members of a recipient group
For now, you will select individual recipients. The “InformaCast Virtual Appliance Installation and User
Guide” describes the other possibilities.
Step 1
Go to Recipients | Edit Recipient Groups. This page shows the number of phones, plugin recipients
and currently registered IP speakers for each group. Only licensed options will appear on this page. For
example, if your system is not licensed for IP speakers, the Speakers column will not appear.
Step 2
Click the Add button, name your recipient group, select the Individually checkbox, click its Edit
button, and move your recipients from the Available Recipients area to the Selected Recipients area in the
Select Individual Recipients pop-up window that appears.
Step 3
Click the Update button when you are done creating your recipient group. Your recipient group is
added to InformaCast.
InformaCast Virtual Appliance Basic Paging
Version 11.0.1
4-1
Chapter 4
Use InformaCast
Allow/Disable SIP Access to InformaCast
SIP access permits you to either allow or deny incoming SIP calls. By default, SIP calls are denied and
clicking the Add button allows you to add exceptions to this denial. Selecting the Allow radio button
allows all SIP calls and clicking the Add button allows you to add exceptions to this allowance.
Step 1
Go to Admin | SIP | SIP Access in InformaCast.
Step 2
Leave the Deny radio button selected and click the Add button to add exceptions to the SIP calls that
are denied.
Step 3
Enter the IP address or fully qualified domain name of the host you want to include in the Host field.
Tip
Step 4
When defining exceptions, make sure to specify the host that directly sends the INVITE
request to InformaCast. This may be a SIP proxy server if proxies stand between InformaCast
and the calling host.
Click the Add button and click the Update button to save your changes.
Add a Broadcast Dialing Configuration
Broadcast dialing configurations determine which message and recipient group will be used based on
the number that is dialed.
Step 1
Go to Admin | DialCast | Dialing Configurations, click the Add button, and enter a dialing pattern
(e.g. 8811) in the Dialing Pattern field for the SIP trunk you created in “Go to Device | Trunk and
click the Add New button.” on page 2-4.
Step 2
Select the recipient group you created in “Add a Recipient Group” on page 4-1 from the Recipient
Groups field.
Step 3
Click the Add button to save your current dialing pattern configuration.
Send a Broadcast
Messages predefine the characteristics of broadcasts. A message can be composed of text, audio, or
both; however, with Basic InformaCast functionality, you only have access to Live Audio broadcasts.
In these messages, the audio is not recorded at all; it is streamed to recipient groups in real time when
the message is broadcast. These broadcasts will skip any phones that are in use when the broadcast
occurs, wait until all recipients capable of playing audio are ready to play the broadcast, play the
broadcast at the volume at which the phone is set when the broadcast occurs, and if there are
simultaneous broadcasts attempted, will play the first broadcast first (the second broadcast will be
bumped).
InformaCast Virtual Appliance Basic Paging
Version 11.0.1
4-2
Chapter 4
Use InformaCast
To send a Live Audio broadcast, dial a directory number on your Cisco IP phone that corresponds to
a broadcast dialing configuration, which is tied to a SIP trunk in CUCM. The call will be processed, and
as soon as all the recipients specified in your broadcast dialing configuration have been activated (minus
the phones already in use), you will be broadcasting live.
You can also view active broadcasts by clicking the View button (only visible on the Send or Edit
Messages page when there is an active broadcast). From the Current Active Broadcasts page, you can
cancel any ongoing broadcasts.
InformaCast Virtual Appliance Basic Paging
Version 11.0.1
4-3
CHAPTER
5
Upgrade InformaCast from Basic to Advanced
InformaCast’s functionality is based on its license, and depending on the license you have, you will be
able to access all of InformaCast’s functionality or only parts of it. Basic InformaCast functionality
includes the ability to send live audio broadcasts to up to 50 phones by dialing a number on your Cisco
IP phone. Advanced InformaCast functionality includes the ability to send a number of different types
of broadcasts (e.g. Live Audio, Pre-recorded Audio, Pre-recorded Audio And Text, etc.) using your
Cisco IP phone’s interface and/or InformaCast’s web interface, interact with InformaCast’s plugins
(e.g. conduct conference calls, trigger contact closures, post to Facebook and Twitter, send broadcasts
to email addresses, etc.), customize scripts that can be attached to broadcasts, and receive confirmation
when broadcasts are sent, among other features.
You can upgrade to Advanced InformaCast by clicking the Try or Buy icons or by contacting
Singlewire to obtain a license for a switch in functionality.
Tip
If you want to learn more about InformaCast Advanced Notification, click the Learn icon to visit a
Singlewire Software website that provides more information on the expanded functionality available to
you with your upgrade.
Note the Differences
There are certain caveats to keep in mind when upgrading from Basic to Advanced InformaCast or
downgrading from Advanced to Basic:
•
If you upgrade from Basic to Advanced InformaCast through either the trial, demonstration,
subscription or perpetual licenses and you decide to return to Basic functionality, all additional
information entered during your Advanced phase will not be saved (e.g. when you revert to Basic
from Advanced, any information you entered after you upgraded initially—dialing configurations,
users, recipient groups, etc.—will not be available once you downgrade to Basic InformaCast). If
you choose to upgrade back to Advanced InformaCast, that information will reappear; however,
any new information you entered after you reverted to Basic functionality will be unavailable.
•
You will need a valid license key (if you are using Advanced InformaCast as a trial, your license key
is already included), which should have been provided to you by your Singlewire salesperson
(contact [email protected] if you didn’t receive one)
•
If you are moving from Basic InformaCast to Advanced InformaCast (and you have previously had
Advanced InformaCast), InformaCast will be restarted with the installation of this new license.
Please plan your upgrades accordingly.
InformaCast Virtual Appliance Basic Paging
Version 11.0.1
5-1
Chapter 5
Upgrade InformaCast from Basic to Advanced
•
Because of the differences between Basic and Advanced InformaCast, there are two user guides.
When upgrading to Advanced InformaCast from Basic, you should receive a new guide that
contains Advanced InformaCast features. Contact Singlewire Software if you have not received a
new guide. If you are using the online help (Help | Install Guide) when you upgrade, you will
need to close that window and reopen it to view the upgraded help.
•
InformaCast’s web interface changes dramatically with your move from Basic to InformaCast,
adding entirely new menus and richer functionality. Depending on your access level, you’ll have
access to:
–
Home. InformaCast’s homepage, complete with RSS news feed.
–
Messages. The message administration page, allowing you to create, edit, and send messages
as broadcasts.
–
Recipients. The recipient group administration page, allowing you to create and manage
recipient groups.
–
Speakers. The IP speaker administration page, allowing you to detect, add, edit, test, and listen
at IP speakers.
–
Bells. The bell schedule overview page, allowing you to view and access the ring lists, bell
schedules, and exceptions you’ve created.
–
Admin. The configuration overview page, allowing you to view scheduled updates and
backups; manage the license key, voice menus, and users; and set up the system, network, and
broadcast parameters, along with DialCasts.
–
Plugins. The plugin administration page, allowing you to add, disable, and enable plugins and
access their configurations.
–
Help. InformaCast’s help pages, allowing you access to various aspects of the online help
system and providing the ability to enter a support request.
•
If you change your password in Basic InformaCast, upgrade to Advanced InformaCast, then
downgrade to Basic InformaCast, your password will revert to your original Basic InformaCast
password.
•
If you plan to switch between Basic and Advanced InformaCast and you change your IP address,
you will need to redeploy the InformaCast OVA (see “Install InformaCast Virtual Appliance” on
page 2-1).
•
If you fail to configure CUCM in Basic InformaCast, upgrading to Advanced InformaCast and
then configuring CUCM before downgrading to Basic InformaCast will require you to perform all
the steps in “Integrate CUCM” on page 2-3 again.
If you have questions about your upgrade, “Troubleshooting” on page 5-5 may provide answers.
Otherwise, you can contact Singlewire Support through the online support request form. Please
include:
•
Account contact information
•
Maintenance contract number
•
Detailed description of problem
•
Product name and version
•
CUCM version
InformaCast Virtual Appliance Basic Paging
Version 11.0.1
5-2
Chapter 5
Upgrade InformaCast from Basic to Advanced
•
InformaCast logs, which are located in https://<InformaCast IP
Address>:8444/InformaCast/logs/
Upgrade InformaCast
All InformaCast users start with Basic InformaCast and can upgrade to Advanced InformaCast using
the Try or Buy icons or by contacting Singlewire to obtain a license for a switch in functionality.
Try Advanced Notification
By clicking the Try icon, you start your 60-day free trial of Advanced InformaCast.
Step 1
Click the Try icon any time while using Basic InformaCast.
If your server is connected to the Internet, you will see a form. Fill out the required information and
click the Submit button.
If your server is not connected to the Internet, you will see Singlewire Sales contact information, which
you should use to register for support during your trial. Click the Start Advanced Notification Trial
button.
The Singlewire InformaCast Software License Agreement page appears.
Step 2
Click the I Accept button. Your window refreshes with InformaCast’s homepage that now shows you
are in your trial of InformaCast Advanced Notification.
Buy Advanced Notification
By clicking the Buy icon, you start the process of obtaining InformaCast Advanced Notification
through either a demonstration, subscription, or perpetual license.
Step 1
Click the Buy icon any time while using Basic InformaCast.
If your server is connected to the Internet, you will be redirected to a Singlewire Software website.
Follow the prompts to obtain a new license.
If your server is not connected to the Internet, you will see a QR code that you can scan with your
smartphone to access the Singlewire website. Once there, follow the prompts to obtain your new
license.
Step 2
Continue with “Enter Your New License Key” on page 5-4.
InformaCast Virtual Appliance Basic Paging
Version 11.0.1
5-3
Chapter 5
Upgrade InformaCast from Basic to Advanced
Enter Your New License Key
Note
If you are in your free trial of Advanced InformaCast, you can skip this section.
When you upgrade from Basic InformaCast to Advanced InformaCast (with the exception of your free
trial of Advanced InformaCast), you will install a new license key to activate the various features of your
InformaCast system.
Note
Bell schedules, the number of IP phones and speakers, CUCM clustering, and message confirmation
are all controlled by your license key. If you are expecting certain functionality and cannot access it,
contact Singlewire.
Warning
If you are moving from Basic InformaCast to Advanced InformaCast (and you have previously had
Advanced InformaCast), InformaCast will be restarted with the installation of this new license. Please
plan your upgrades accordingly.
Step 1
Click the Access Application Management Tools with Control Center link on the Singlewire Start
page followed by the Manage Licenses link.
Step 2
Enter your username and password in the Login Name and Password fields, respectively. By default,
your username is admin and your password is changeMe. Click the Login button.
Step 3
Click the Browse button and navigate to the license key file that was emailed to you. You can also enter
the path to the license key file.
Step 4
Select your license key file and click the Open button.
Step 5
Click the Upload button on the Upload a New License page.
The License Manager holds all of your Singlewire licenses, unless you are participating in your
Advanced InformaCast trial. Depending on the software applications you are using, you will see
different licenses housed on this page.
Tip
If the key is not accepted, check that you selected the proper file containing the XML key that
was emailed to you, ensure that your IP address is correct, determine that your key has not
expired, and ensure that the MaxVersion parameter in your license key matches or is greater
than your version of InformaCast. If you’re still having trouble, contact Singlewire for
assistance.
InformaCast Virtual Appliance Basic Paging
Version 11.0.1
5-4
Chapter 5
Upgrade InformaCast from Basic to Advanced
Troubleshooting
The following common issues may arise when you are upgrading from Basic to Advanced InformaCast.
Problem I upgraded InformaCast (from Basic to Advanced
trial/demonstration/subscription/perpetual) and I’m seeing some of the following problems:
•
I can’t log in
•
My recipients/user accounts/dialing configurations, etc. are missing
•
I’m sending out broadcasts that have worked in the past, but they’re not going through now
If you upgrade from Basic to Advanced InformaCast through either the trial, demonstration,
subscription, or perpetual licenses and you decide to return to Basic functionality, all additional
information entered during your Advanced phase will not be saved. If you choose to upgrade back to
Advanced InformaCast, that information will reappear; however, any new information you entered
after you reverted to Basic functionality will be unavailable.
Solution
For the three examples cited in this problem, you have a few options:
•
I can’t log in. Did you change your administrator password while you were in Advanced
InformaCast? If so, your password has reverted to what it was when you were initially in Basic
InformaCast. Use that password for logging in. If you have forgotten that password, contact
Singlewire Support to reset your password.
•
My recipients/user accounts/dialing configurations, etc. are missing. If you added these
recipients/user accounts/dialing configurations while you were in Advanced InformaCast,
downgrading to Basic InformaCast reverts you to the information you last entered before your
upgrade. You will need to enter this information again or upgrade again to Advanced InformaCast.
Please note that any new information you entered in your second go-round with Basic InformaCast
will not be available if you decide to upgrade again to Advanced InformaCast.
•
I’m sending out broadcasts that have worked in the past, but they’re not going through
now. Did you change your IP address in Advanced InformaCast before reverting to Basic
InformaCast? If so, your broadcasts will no longer work. You will need to redeploy the
InformaCast OVA (see “Install InformaCast Virtual Appliance” on page 2-1) to fix this issue.
Problem
I just upgraded InformaCast and I have errors on the Edit Telephony Configuration page.
If you encounter errors on the Edit Telephony Configuration page, verify that the fields have
the proper information entered into them. Check the following fields’ information:
Solution
•
Communications Manager AXL User. Access CUCM’s administrative interface and log in with
the same username/password combination. If you are unable to log in, InformaCast will be unable
to log in.
•
Communications Manager IP Address(es). Use the same test as for the Communications
Manager Admin User field.
•
Communications Manager Application User. Access CUCM’s administrative interface and
ensure that your application user’s credentials in InformaCast match those in CUCM.
•
SNMP Community Name. Verify that the value you entered here matches the value in CUCM.
Use the Multicast Testing Tool to verify SNMP functionality.
InformaCast Virtual Appliance Basic Paging
Version 11.0.1
5-5
Chapter 5
Upgrade InformaCast from Basic to Advanced
Problem I just upgraded/downgraded InformaCast and I’m seeing the error, “Default configuration
Not Connected,” in the Communications Manager Versions column on the Admin Overview page.
Rebuild your phone cache. This problem occurs whenever your license changes and
whenever you add/update/delete a cluster. If either the license or clusters change, the phone cache
must be rebuilt to reflect those changes. The phone cache is automatically rebuilt every hour, but if you
want it completed sooner than that, you can click the Update button on the Edit Recipient Groups
page to discover current IP phone info from CUCM. Once this is done, the CUCM information
appears correctly on the Admin Overview page.
Solution
Problem
I just upgraded InformaCast and there are phones missing from my recipient groups.
Phones are found from CUCM using SNMP and AXL. If you have phones missing from a
recipient group, ensure the following:
Solution
•
The CUCM Admin account has the correct username/password information
•
SNMP is enabled on all CUCM cluster nodes
•
SNMP community strings have READ permissions on all CUCM cluster nodes
•
SNMP community strings are the same on all CUCM cluster nodes
•
Nothing is blocking UDP port 161 from the InformaCast server to all CUCM cluster nodes
You can use the Multicast Testing Tool to troubleshoot SNMP further.
I’ve upgraded InformaCast, but when I log in and try to access any functionality, I’m directed
to a page where I get the message, “Missing or Invalid Application License Key.”
Problem
If your license key is not accepted, check that you selected the proper file containing the XML
key that was emailed to you, ensure that your IP address is correct, determine that your key has not
expired, and ensure that the MaxVersion parameter in your license key matches or is greater than your
version of InformaCast. If you’re still having trouble, contact Singlewire for assistance.
Solution
InformaCast Virtual Appliance Basic Paging
Version 11.0.1
5-6
INDEX
A
Access
InformaCast Virtual Appliance 2-3
Singlewire Start Page 2-3
Webmin 2-3
Active Broadcasts 4-3
Add
Access Control/AXL User Group 2-4
Broadcast Dialing Configuration 4-2
Recipient Group 4-1
SIP Access Exception 4-2
Advanced Functionality Definition 5-1
Authentication URL 2-5
B
Basic Functionality Definition 5-1
Basic InformaCast Upgrade 5-1
Broadcast
Cancel 4-3
Description of 4-1
Send 4-2
Broadcast Dialing Configuration, Add
Buy Advanced Notification 5-3
C
Cancel Active Broadcasts 4-3
Change Default Accounts 3-1
Configure
Access Control/AXL User Group
Access Control Group 2-4
Application User 2-4
AXL User Group 2-4
Device Pool 2-4
G.711 2-4
InformaCast 3-1
InformaCast Telephony 3-2
SNMP Community String 2-4
CUCM
Access Control/AXL User Group
Access Control Group 2-4
Application User 2-4
Authentication URL 2-5
AXL User Group 2-4
Configure InformaCast 3-2
Device Pool 2-4
Enable Services 2-4
G.711 2-4
Integrate 2-3
Reboot Phones 2-5
Region 2-4
SNMP Community String 2-4
Test Phones 2-6
Web Access for Phones 2-5
D
Default CUCM Cluster
E
Enable
CUCM Services 2-4
Web Access for Phones 2-5
Ensure Multicast is Enabled 2-1
Environments, Description of InformaCast
ESXi 2-1
F
Free Trial
H
Help
4-2
2-4
2-4
3-2
1-1
5-3
1-2
I
InformaCast
Change Default Accounts 3-1
Documentation 1-2
Help 1-2
Support 1-2
InformaCast Virtual Appliance
Access 2-3
Definition of 1-1
Install OVA 2-1
Set the System Time 2-3
Upgrade from Basic to Advanced 5-1
Upgrade License 5-4
Install InformaCast Virtual Appliance 2-1
Integrate CUCM 2-3
L
License Key
Dependent Features 5-4
Enter New 5-4
Live Audio Broadcast 4-2
Log into InformaCast 3-1
M
Manage
New License Key 5-4
SIP Access to InformaCast 4-2
Messages, Description of 4-1
Multicast 2-1
P
Perpetual InformaCast
Phones
Reboot 2-5
Test 2-6
5-3
InformaCast Virtual Appliance Basic Paging
Version 11.0.1
IN-1
Index
Prerequisites, Description of
1-1
R
Reboot Phones 2-5
Recipient, Description of 4-1
Recipient Group, Add 4-1
S
Send Live Audio Broadcast 4-2
Set Authentication URL 2-5
Set System Time 2-3
Singlewire Start Page, Access 2-3
SIP
Add Access Exception 4-2
Allow/Disable Access to InformaCast
Subscription InformaCast 5-3
Support 1-2
T
Test Phones 2-6
Troubleshooting 1-2, 5-5
Try Advanced Notification
5-3
U
Upgrade InformaCast 5-1
Basic to Advanced 5-1
Buy Advanced Notification 5-3
Enter New License Key 5-4
Errors on Telephony Configuration
Invalid License Key 5-6
Missing CUCM Information 5-6
Missing Phones 5-6
Note the Differences 5-1
Troubleshooting 5-5
Try Advanced Notification 5-3
V
View Active Broadcasts
Virtual Machine 2-1
VMware 2-1
4-2
5-5
4-3
W
Web Access, Phones 2-5
Webmin, Access 2-3
InformaCast Virtual Appliance Basic Paging
Version 11.0.1
IN-2
">