HP | ENVY 5660 e-All-in-One Printer | User's Manual | HP ENVY 5660 e-All-in-One Printer User's Manual

HP ENVY 5660 e-All-in-One series
Table of contents
1 How do I? .......................................................................................................................................................... 1
2 Get started ........................................................................................................................................................ 2
Printer parts .......................................................................................................................................... 3
Control panel and status lights ............................................................................................................. 5
Paper basics ......................................................................................................................................... 8
Load media ......................................................................................................................................... 11
Load original ....................................................................................................................................... 15
Open the HP printer software (Windows) ........................................................................................... 16
Sleep mode ........................................................................................................................................ 17
Auto-Off .............................................................................................................................................. 18
Accessibility ........................................................................................................................................ 19
3 Print ................................................................................................................................................................. 20
Print photos ........................................................................................................................................ 21
Print documents ................................................................................................................................. 23
Print on both sides (duplexing) ........................................................................................................... 24
Print with AirPrint ................................................................................................................................ 25
Print using the maximum dpi .............................................................................................................. 26
Tips for print success ......................................................................................................................... 27
4 Use Web Services .......................................................................................................................................... 29
What are Web Services? .................................................................................................................... 30
Set up Web Services .......................................................................................................................... 31
Print with HP ePrint ............................................................................................................................ 33
Use HP Printables .............................................................................................................................. 35
Use the HP Connected website ......................................................................................................... 36
Remove Web Services ....................................................................................................................... 37
Tips for using Web Services ............................................................................................................... 38
ENWW
iii
5 Copy and scan ................................................................................................................................................ 39
Copy documents ................................................................................................................................ 40
Scan ................................................................................................................................................... 41
Tips for copy and scan success ......................................................................................................... 46
6 Work with cartridges ....................................................................................................................................... 47
Check the estimated ink levels ........................................................................................................... 48
Replace the cartridges ....................................................................................................................... 49
Order ink supplies .............................................................................................................................. 51
Use single-cartridge mode ................................................................................................................. 52
Cartridge warranty information ........................................................................................................... 53
Anonymous usage information storage .............................................................................................. 54
Tips for working with cartridges .......................................................................................................... 55
7 Connect Your Printer ...................................................................................................................................... 56
Set up the printer for wireless communication ................................................................................... 57
Change network settings .................................................................................................................... 62
Advanced printer management tools (for networked printers) ........................................................... 63
Tips for setting up and using a networked printer .............................................................................. 65
8 Solve a problem .............................................................................................................................................. 66
Jams and paper-feed issues .............................................................................................................. 67
Ink cartridge issues ............................................................................................................................ 72
Printing issues .................................................................................................................................... 74
Copy issues ........................................................................................................................................ 82
Scan issues ........................................................................................................................................ 83
Network and connection issues .......................................................................................................... 84
Printer hardware issues ...................................................................................................................... 86
HP support ......................................................................................................................................... 88
Appendix A Technical information ..................................................................................................................... 90
Hewlett-Packard Company notices .................................................................................................... 91
Specifications ..................................................................................................................................... 92
Environmental product stewardship program ..................................................................................... 94
Regulatory information ....................................................................................................................... 98
Appendix B Errors (Windows) .......................................................................................................................... 105
Low on ink ........................................................................................................................................ 106
Very low on ink ................................................................................................................................. 107
Ink cartridge problem ........................................................................................................................ 108
iv
ENWW
Check cartridge access door ............................................................................................................ 109
Ink cartridge problem ........................................................................................................................ 110
Paper size mismatch ........................................................................................................................ 111
Ink cartridge carriage stalled ............................................................................................................ 112
Paper jam or tray problem ................................................................................................................ 113
Out of paper ..................................................................................................................................... 114
Document failed to print ................................................................................................................... 115
Printer failure .................................................................................................................................... 116
Door open ......................................................................................................................................... 117
Ink cartridge failure ........................................................................................................................... 118
Counterfeit Cartridge Advisory ......................................................................................................... 119
Incompatible ink cartridges ............................................................................................................... 120
Paper too short ................................................................................................................................. 121
Paper too long to auto-duplex .......................................................................................................... 122
Incompatible HP Instant Ink Cartridge .............................................................................................. 123
Used HP Instant Ink Cartridge .......................................................................................................... 124
Please Connect Printer to HP Connected ........................................................................................ 125
Cannot Print ..................................................................................................................................... 126
HP Protected Cartridge Installed ...................................................................................................... 127
Index ................................................................................................................................................................. 128
ENWW
v
vi
ENWW
1
How do I?
Learn how to use your HP ENVY 5660 series
ENWW
●
Get started on page 2
●
Print on page 20
●
Use Web Services on page 29
●
Copy and scan on page 39
●
Work with cartridges on page 47
●
Connect Your Printer on page 56
●
Technical information on page 90
●
Solve a problem on page 66
1
2
Get started
This section contains the following topics:
2
●
Printer parts
●
Control panel and status lights
●
Paper basics
●
Load media
●
Load original
●
Open the HP printer software (Windows)
●
Sleep mode
●
Auto-Off
●
Accessibility
Chapter 2 Get started
ENWW
Printer parts
Front view
Figure 2-1 Front and top views of HP ENVY 5660 e-All-in-One series
ENWW
Feature
Description
1
Lid
2
Lid-backing
3
Scanner glass
4
Printer model name
5
Cartridge access door
6
Memory device area
7
Cartridge access area
8
Ink cartridges
9
Photo tray
10
On button (also referred to as the Power button)
11
Wireless status light
12
Control panel
13
Output tray
14
Color graphics display (also referred to as the display)
15
Automatic output tray extender (also referred to as the tray extender)
16
Memory card slot
17
Memory device light
18
Paper tray
Printer parts
3
Back view
Figure 2-2 Rear view of HP ENVY 5660 e-All-in-One series
4
Feature
Description
1
Power connection. Use only the power cord supplied by HP.
2
Power light. The green light indicates the power cord is installed correctly.
3
Rear USB port
Chapter 2 Get started
ENWW
Control panel and status lights
Overview of buttons and lights
The following diagram and related table provides a quick reference to the printer control panel
features.
Label
Name and Description
1
Wireless light: Indicates the status of the printer wireless connection.
●
Solid blue light indicates that wireless connection has been established and you can print.
●
Slow blinking light indicates that wireless is on, but the printer is not connected to a network. Make sure your
printer is within the range of wireless signal.
●
Fast blinking light indicates wireless error. Refer to the message on the printer display.
●
If wireless is turned off, the wireless light is off and the display screen shows Wireless Off.
2
On button: Turns the printer on or off.
3
Back button: Returns to the previous screen.
4
Help button: Opens the Help menu for the current operation.
5
Home button: Returns to the Home screen, the screen that is displayed when you first turn on the printer.
6
Control panel display: Touch the screen to select menu options, or scroll through the menu items.
ENWW
Control panel and status lights
5
Control panel display icons
Icon
Purpose
Copy: Opens the Copy menu where you can select a copy type or change the copy settings.
Scan: Opens the Scan menu where you can select a destination for your scan.
HP Printables: Provides a quick and easy way to access and print information from the web, such as
coupons, coloring pages, puzzles, and more.
Photo: Opens the Photo menu where you can view and print photos, or reprint a printed photo.
Setup: Opens the Setup menu where you can change preferences and use tools to perform maintenance
functions.
Help: Opens the Help menu where you can view How To videos, printer feature information, and tips.
ePrint icon: Opens the Web Services Summary menu, where you can check ePrint status details, change
ePrint settings, or print an Info page.
Wi-Fi Direct icon: Opens the Wi-Fi Direct menu where you can turn on Wi-Fi Direct, turn off Wi-Fi Direct,
and display the Wi-Fi Direct name and password.
Wireless icon: Opens the Wireless Summary menu where you can check wireless status and change
wireless settings. You can also print a wireless test report, helping diagnose network connection issues.
6
Chapter 2 Get started
ENWW
Icon
Purpose
ECO icon: Displays a screen where you can configure some of the printer environmental features.
Ink icon: Shows estimated ink levels by cartridge. Displays a warning symbol if the ink level is less than
the minimum expected ink level.
NOTE: Ink level warnings and indicators provide estimates for planning purposes only. When you
receive a low-ink warning message, consider having a replacement cartridge available to avoid possible
printing delays. You do not need to replace cartridges until the print quality becomes unacceptable.
ENWW
Control panel and status lights
7
Paper basics
The printer is designed to work well with most types of office paper. It is best to test a variety of print
paper types before buying large quantities. Use HP paper for optimum print quality. Visit the HP
website at www.hp.com for more information about HP paper.
HP recommends plain papers with the ColorLok logo for printing everyday
documents. All papers with the ColorLok logo are independently tested to meet high
standards of reliability and print quality, and produce documents with crisp, vivid
color, bolder blacks, and that dry faster than ordinary plain papers. Look for papers
with the ColorLok logo in a variety of weights and sizes from major paper
manufacturers.
This section contains the following topics:
●
Recommended papers for printing
●
Order HP paper supplies
●
Tips for selecting and using paper
Recommended papers for printing
If you want the best print quality, HP recommends using HP papers that are specifically designed for
the type of project you are printing.
Depending on your country/region, some of these papers might not be available.
Photo printing
●
HP Premium Plus Photo Paper
HP Premium Plus Photo Paper is HP’s highest-quality photo paper for your best photos. With
HP Premium Plus Photo Paper, you can print beautiful photos that are instant-dry so you can
share them right off the printer. It is available in several sizes, including A4, 8.5 x 11 inches, 4 x
6 inches (10 x 15 cm), 5 x 7 inches (13 x 18 cm), and 11 x 17 inches (A3), and in two finishes glossy or soft gloss (semi-gloss). Ideal for framing, displaying, or gifting your best photos and
special photo projects. HP Premium Plus Photo Paper delivers exceptional results with
professional quality and durability.
●
HP Advanced Photo Paper
This thick photo paper features an instant-dry finish for easy handling without smudging. It
resists water, smears, fingerprints, and humidity. Your prints have a look and feel comparable to
a store-processed photo. It is available in several sizes, including A4, 8.5 x 11 inches, 10 x
15 cm (4 x 6 inches), 13 x 18 cm (5 x 7 inches), and two finishes – glossy or soft-gloss (satin
matte). It is acid-free for longer lasting documents.
●
HP Everyday Photo Paper
Print colorful, everyday snapshots at a low cost, using paper designed for casual photo printing.
This affordable photo paper dries quickly for easy handling. Get sharp, crisp images when you
8
Chapter 2 Get started
ENWW
use this paper with any inkjet printer. It is available in glossy finish in several sizes, including A4,
8.5 x 11 inches, and 10 x 15 cm (4 x 6 inches). It is acid-free for longer lasting documents.
●
HP Photo Value Packs
HP Photo Value Packs conveniently package original HP ink cartridges and HP Advanced Photo
Paper to save you time and take the guesswork out of printing affordable, lab-quality photos with
your HP printer. Original HP inks and HP Advanced Photo Paper have been designed to work
together so your photos are long lasting and vivid, print after print. Great for printing out an entire
vacation's worth of photos or multiple prints to share.
Business documents
●
HP Premium Presentation Paper 120g Matte
This paper is a heavy two-sided matte paper perfect for presentation, proposals, reports, and
newsletters. It is heavyweight for an impressive look and feel.
●
HP Brochure Paper 180g Glossy or HP Professional Paper 180 Glossy
These papers are glossy-coated on both sides for two-sided use. They are the perfect choice for
near-photographic reproductions and business graphics for report covers, special presentations,
brochures, mailers, and calendars.
●
HP Brochure Paper 180g Matte or HP Professional Paper 180 Matt
These papers are matte-coated on both sides for two-sided use. They are the perfect choice for
near-photographic reproductions and business graphics for report covers, special presentations,
brochures, mailers, and calendars.
Everyday printing
All the papers listed for everyday printing feature ColorLok Technology for less smearing, bolder
blacks, and vivid colors.
●
HP Bright White Inkjet Paper
HP Bright White Inkjet Paper delivers high-contrast colors and sharp text. It is opaque enough
for two-sided color usage with no show-through, which makes it ideal for newsletters, reports,
and flyers.
●
HP Printing Paper
HP Printing Paper is a high-quality multifunction paper. It produces documents that look and feel
more substantial than documents printed on standard multipurpose or copy paper. It is acid-free
for longer lasting documents.
●
HP Office Paper
HP Office Paper is a high-quality multifunction paper. It is suitable for copies, drafts, memos, and
other everyday documents. It is acid-free for longer lasting documents.
●
HP Office Recycled Paper
HP Office Recycled Paper is a high-quality multifunction paper made with 30% recycled fiber.
ENWW
Paper basics
9
Order HP paper supplies
The printer is designed to work well with most types of office paper. Use HP paper for optimum print
quality.
To order HP papers and other supplies, go to www.hp.com. At this time, some portions of the HP
website are available in English only.
HP recommends plain papers with the ColorLok logo for printing and copying of everyday documents.
All papers with the ColorLok logo are independently tested to meet high standards of reliability and
print quality, and produce documents with crisp, vivid color, bolder blacks and dry faster than ordinary
plain papers. Look for papers with the ColorLok logo in a variety of weights and sizes from major
paper manufacturers.
Tips for selecting and using paper
For the best results, observe the following guidelines.
10
●
Load only one type of paper at a time into the paper or photo tray.
●
When loading the tray, make sure the paper is loaded correctly.
●
Do not overload the tray.
●
To prevent jams, poor print quality, and other printing problems, avoid loading the following
paper in the tray:
◦
Multipart forms
◦
Media that is damaged, curled, or wrinkled
◦
Media with cutouts or perforations
◦
Media that is heavily textured, embossed, or does not accept ink well
◦
Media that is too lightweight or stretches easily
◦
Media that contains staples or clips
Chapter 2 Get started
ENWW
Load media
Select a paper size to continue.
To load small-size paper
1.
Pull out the photo tray.
If you do not see the photo tray, remove the output tray from the printer.
2.
Load paper.
●
Insert a stack of photo paper into the photo tray print side down.
●
Slide the photo paper forward until it stops.
3.
Push the photo tray back in.
4.
Change or retain the paper settings on the printer display.
To load full-size paper
1.
ENWW
Pull out the paper tray, slide the paper-width guides outward, and then remove any previously
loaded media.
Load media
11
2.
Load paper.
●
Insert a stack of paper into the paper tray with the short edge forward and the print side
down.
●
Slide the paper forward until it stops.
●
Slide the paper-width guides inward until they stop at the edges of the paper.
3.
Push the paper tray back in.
4.
Change or retain the paper settings on the printer display.
To load legal paper
12
1.
Pull out the paper tray, slide the paper-width guides outward, and then remove any previously
loaded media.
2.
Unlock and open the front side of the paper tray.
3.
Load paper.
Chapter 2 Get started
ENWW
●
Insert a stack of paper into the paper tray with the short edge forward and the print side
down.
●
Slide the paper forward until it stops.
●
Slide the paper-width guides inward until they stop at the edges of the paper.
4.
Push the paper tray back in.
5.
Change or retain the paper settings on the printer display.
To load envelopes
1.
Pull out the paper tray, slide the paper-width guides outward, and then remove any previously
loaded media.
2.
Load envelopes
●
ENWW
Insert one or more envelopes in the center of the paper tray. The print side should face
down. The flap should be on the left side and facing up.
Load media
13
14
●
Slide a stack of envelopes inward until it stops.
●
Slide the paper-width guides inward against the stack of envelopes until they stop.
3.
Push the paper tray back in.
4.
Change or retain the paper settings on the printer display.
Chapter 2 Get started
ENWW
Load original
To load original on the scanner glass
ENWW
1.
Lift the scanner lid.
2.
Load the original print side down on the right front corner of the glass.
3.
Close the scanner lid.
Load original
15
Open the HP printer software (Windows)
After installing the HP printer software, depending on your operating system, do one of the following:
16
●
Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the
printer name.
●
Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and
then select the printer name.
●
Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All
Programs, click HP, click the folder for the printer, and then select the icon with the printer's
name.
Chapter 2 Get started
ENWW
Sleep mode
●
Power usage is reduced while in the Sleep mode.
●
After initial setup of printer, the printer will enter the Sleep mode after five minutes of inactivity.
●
The time to the Sleep mode can be changed from the control panel.
To set the Sleep mode time
1.
ENWW
From the Home screen, touch
(Setup).
2.
Touch Preferences.
3.
Scroll through the options, and then touch Sleep Mode.
4.
Touch After 5 minutes or After 10 minutes, or After 15 minutes.
Sleep mode
17
Auto-Off
Auto-Off is automatically enabled by default when you turn on the printer. When Auto-Off is enabled,
the printer will automatically turn off after 2 hours of inactivity to help reduce energy use. Auto-Off
turns the printer off completely, so you must use the On button to turn the printer back on. Even when
Auto-Off is disabled, the printer enters Sleep mode after 5 minutes of inactivity to help reduce energy
use.
You can change the Auto-Off setting from the control panel.
To change Auto-Off setting
1.
From the Home screen on the printer display, select Preferences.
NOTE: If you do not see the Home screen, press the Home button.
2.
From the Preferences menu, select Auto-Off.
3.
From the Auto-Off menu, select On or Off, and then press OK to confirm the setting.
Once you change the setting, the printer maintains the setting.
18
Chapter 2 Get started
ENWW
Accessibility
The printer provides a number of features that make it accessible for people with disabilities.
Visual
The HP software provided with the printer is accessible for users with visual impairments or low vision
by using your operating system's accessibility options and features. The software also supports most
assistive technology such as screen readers, Braille readers, and voice-to-text applications. For users
who are color blind, colored buttons and tabs used in the HP software have simple text or icon labels
that convey the appropriate action.
Mobility
For users with mobility impairments, the HP software functions can be executed through keyboard
commands. The HP software also supports Windows accessibility options such as StickyKeys,
ToggleKeys, FilterKeys, and MouseKeys. The printer doors, buttons, paper trays, and paper-width
guides can be operated by users with limited strength and reach.
Support
For more details about the accessibility of this printer and HP's commitment to product accessibility,
visit HP's website at www.hp.com/accessibility.
For accessibility information for Mac OS X, visit the Apple website at www.apple.com/accessibility.
ENWW
Accessibility
19
3
Print
Most print settings are automatically handled by the software application. Change the settings
manually only when you want to change print quality, print on specific types of paper, or use special
features.
This section contains the following topics:
20
●
Print photos
●
Print documents
●
Print on both sides (duplexing)
●
Print with AirPrint
●
Print using the maximum dpi
●
Tips for print success
Chapter 3 Print
ENWW
Print photos
Make sure photo paper is loaded into the photo tray.
To print photos from a memory device
1.
Insert a memory device into the slot.
2.
On the printer display, select a photo that you want to print and touch Continue.
3.
Specify the number of photos to print.
4.
Touch
(Edit) to change brightness, crop, or rotate the selected photo, or touch
Settings) to use such features as Red Eye Removal or Photo Fix.
5.
Touch Continue and preview the selected photo.
6.
Touch Print to begin printing.
(Print
To print a photo from the printer software
1.
From your software, select Print.
2.
Make sure your printer is selected.
3.
Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer
Setup, Printer Properties, Printer, or Preferences.
4.
Select the appropriate options.
●
On the Layout tab, select Portrait or Landscape orientation.
●
On the Paper/Quality tab, select the appropriate paper type from the Media drop-down list
in the Tray Selection area, and then select the appropriate print quality in the Quality
Settings area.
●
Click Advanced to select the appropriate paper size from the Paper Size drop-down list.
5.
Click OK to return to the Properties dialog box.
6.
Click OK, and then click Print or OK in the Print dialog box.
NOTE: After the printing is finished, remove unused photo paper from the photo tray. Store the
photo paper so it does not start to curl, which could reduce the quality of your printout.
ENWW
Print photos
21
To print a photo from the computer (OS X)
1.
Load paper in the tray. For more information, see Load media on page 11.
2.
From the File menu in your software, choose Print.
3.
Make sure your printer is selected.
4.
Set the print options.
If you do not see options on the Print dialog, click Show Details.
NOTE: The following options are available for a USB connected printer. Locations for the
options can vary from one application to another.
a.
Choose the appropriate paper size in the Paper Size pop-up menu.
NOTE: If you change the Paper Size ensure that you have loaded the correct paper and
set the paper size on the printer control panel to match.
5.
22
b.
Select an Orientation.
c.
From the pop-up menu, choose Paper Type/Quality, and then choose the following
settings:
●
Paper Type: The appropriate photo paper type
●
Quality: Best or Maximum dpi
●
Click the Color Options disclosure triangle, and then choose the appropriate Photo Fix
option.
◦
Off: applies no changes to the image.
◦
Basic: automatically focuses the image; moderately adjusts image sharpness.
Select any other print settings you want, and then click Print.
Chapter 3 Print
ENWW
Print documents
Make sure paper is loaded into the paper tray.
To print a document
1.
From your software, select Print.
2.
Make sure your printer is selected.
3.
Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer
Setup, Printer Properties, Printer, or Preferences.
4.
Select the appropriate options.
●
On the Layout tab, select Portrait or Landscape orientation.
●
On the Paper/Quality tab, select the appropriate paper type from the Media drop-down list
in the Tray Selection area, and then select the appropriate print quality in the Quality
Settings area.
●
Click Advanced to select the appropriate paper size from the Paper Size drop-down list.
5.
Click OK to close the Properties dialog box.
6.
Click Print or OK to begin printing.
To print documents (OS X)
1.
Load paper in the tray. For more information, see Load media on page 11.
2.
From the File menu in your software, choose Print.
3.
Make sure your printer is selected.
4.
Specify the page properties.
If you do not see options on the Print dialog, click Show Details.
NOTE: The following options are available for a USB connected printer. Locations for the
options can vary from one application to another.
●
Choose the paper size.
NOTE: If you change the Paper Size ensure that you have loaded the correct paper and
set the paper size on the printer control panel to match.
5.
●
Select the orientation.
●
Enter the scaling percentage.
Click Print.
NOTE: If your printed documents are not aligned within the margins of the paper, make sure that
you have selected the correct language and region. On the printer display, select Settings, and then
select Preferences. Select your language, and then region from the options provided. The correct
language and country/region settings ensure that the printer will have the appropriate default paper
size settings.
ENWW
Print documents
23
Print on both sides (duplexing)
To print on both sides of the page
You can print on both sides of a sheet of paper automatically by using the automatic two-sided
printing mechanism (duplexer).
1.
From your software, select Print.
2.
Make sure your printer is selected.
3.
Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer
Setup, Printer Properties, Printer, or Preferences.
4.
Select the appropriate options.
●
On the Layout tab, select Portrait or Landscape orientation, and select Flip on Long Edge
or Flip on Short Edge from the Print on Both Sides drop-down list.
●
On the Paper/Quality tab, select the appropriate paper type from the Media drop-down list
in the Tray Selection area, and then select the appropriate print quality in the Quality
Settings area.
●
Click the Advanced button, in the Paper/Output area, select the appropriate paper size from
the Paper Size drop-down list.
NOTE: If you change the Paper Size ensure that you have loaded the correct paper and
set the paper size on the printer control panel to match.
5.
Click OK to print.
NOTE: After one page of the document has been printed, wait for the printer to reload the
paper automatically to print on the other side. You do not need to take any action.
To print on both sides of the page (OS X)
24
1.
From the File menu in your software, choose Print.
2.
In the Print dialog, choose Layout from the pop-up menu.
3.
Choose the type of binding you want for your two-sided pages, and then click Print.
Chapter 3 Print
ENWW
Print with AirPrint
Printing using Apple’s AirPrint is supported for iOS 4.2 and Mac OS X 10.7 or later. Use AirPrint to
print wirelessly to the printer from an iPad (iOS 4.2), iPhone (3GS or later), or iPod touch (third
generation or later) in the following mobile applications:
●
Mail
●
Photos
●
Safari
●
Supported third-party applications, for example Evernote
To use AirPrint, ensure the following:
ENWW
●
The printer and the Apple device must be connected to the same network as your AirPrint
enabled device. For more information about using AirPrint and about which HP products are
compatible with AirPrint, go to www.hp.com/go/mobileprinting.
●
Load paper that matches the paper settings of the printer.
Print with AirPrint
25
Print using the maximum dpi
Use maximum dots per inch (dpi) mode to print high-quality, sharp images on photo paper.
Printing in maximum dpi takes longer than printing with other settings and requires a large amount of
disk space.
To print in maximum dpi mode
1.
From your software, select Print.
2.
Make sure your printer is selected.
3.
Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer
Setup, Printer Properties, Printer, or Preferences.
4.
Click the Paper/Quality tab.
5.
From the Media drop-down list, select the appropriate paper type and print quality.
6.
Click the Advanced button.
7.
In the Printer Features area, select Yes from the Print in Max DPI drop-down list.
8.
Select the appropriate paper size from the Paper Size drop-down list.
9.
Click OK to close the advanced options.
10. Confirm Orientation on the Layout tab, and then click OK to print.
To print using maximum dpi (OS X)
1.
From the File menu in your software, choose Print.
2.
Make sure your printer is selected.
3.
Set the print options.
If you do not see options on the Print dialog, click Show Details.
NOTE: The following options are available for a USB connected printer. Locations for the
options can vary from one application to another.
a.
Choose the appropriate paper size in the Paper Size pop-up menu.
NOTE: If you change the Paper Size ensure that you have loaded the correct paper and
set the paper size on the printer control panel to match.
b.
4.
26
From the pop-up menu, choose Paper Type/Quality, and then choose the following
settings:
●
Paper Type: The appropriate paper type
●
Quality: Maximum dpi
Select any other print settings that you want, and then click Print.
Chapter 3 Print
ENWW
Tips for print success
Use the following tips to print successfully.
Tips for printing from a computer
For more information on printing documents, photos, or envelopes from a computer, use the following
links to operating-system specific instructions.
●
Learn how to print photos saved on your computer. Click here to go online for more information.
●
Learn how to print envelopes from your computer. Click here to go online for more information.
Tips for ink and paper
●
Use original HP cartridges. Original HP cartridges are designed for and tested with HP printers
to help you produce great results, time after time.
●
Make sure the cartridges have sufficient ink. To view the estimated ink levels, touch
from the Home screen.
(Ink)
To learn more tips about working with cartridges, see Tips for working with cartridges
on page 55 for more information.
●
Load a stack of paper, not just one page. Use clean and flat paper of the same size. Make sure
only one type of paper is loaded at a time.
●
Adjust the paper-width guides in the paper tray to fit snugly against all paper. Make sure the
paper-width guides do not bend the paper in the paper tray.
●
Set the print quality and paper size settings according to the type and size of paper loaded in the
paper tray.
Printer settings tips
●
On the Paper/Quality tab, select the appropriate paper type from the Media drop-down list in the
Tray Selection area, and then select the appropriate print quality in the Quality Settings area.
●
Select the appropriate paper size from the Paper Size drop-down list in the Advanced Options
dialog box. Access the Advanced Options dialog box by clicking the Advanced button on the
Layout or Paper/Quality tab.
●
To change default print settings, click Print & Scan, and then click Set Preferences in the printer
software.
Depending on your operating system, do one of the following to open the printer software:
ENWW
Tips for print success
27
●
◦
Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select
the printer name.
◦
Windows 8: On the Start screen, right-click an empty area on the screen, click All Apps on
the app bar, and then click the icon with the printer's name.
◦
Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start,
select All Programs, click HP, click HP ENVY 5660 series, and then click HP ENVY 5660
series.
If you want to print a black and white document using black ink only, click the Advanced button.
From the Print in Grayscale drop-down menu, select Black Ink Only, then click the OK button.
Printer settings tips
●
On the Print dialog, use the Paper Size pop-up menu to select the size of paper loaded in the
printer.
●
On the Print dialog, choose the Paper Type/Quality pop-up menu and select the appropriate
paper type and quality.
●
To print a black and white document using only black ink, choose the Paper Type/Quality from
the pop-up menu and choose Grayscale from the Color pop-up menu.
●
Original HP ink cartridges are designed and tested with HP printers and papers to help you
easily produce great results, time after time.
Notes
NOTE: HP cannot guarantee the quality or reliability of non-HP supplies. Product service or
repairs required as a result of using a non-HP supply will not be covered under warranty.
If you believe you purchased original HP ink cartridges, go to:
www.hp.com/go/anticounterfeit
●
Ink level warnings and indicators provide estimates for planning purposes only.
NOTE: When you receive a low-ink warning message, consider having a replacement cartridge
available to avoid possible printing delays. You do not need to replace the cartridges until print
quality becomes unacceptable.
28
●
Software settings selected in the print driver only apply to printing, they do not apply to copying
or scanning.
●
You can print your document on both sides of the paper.
Chapter 3 Print
ENWW
4
ENWW
Use Web Services
●
What are Web Services?
●
Set up Web Services
●
Print with HP ePrint
●
Use HP Printables
●
Use the HP Connected website
●
Remove Web Services
●
Tips for using Web Services
29
What are Web Services?
ePrint
●
ePrint is a free service from HP that allows you to print to your HP ePrint-enabled printer
anytime, from any location. It's as simple as sending an email to the email address assigned to
your printer when you enable Web Services on the printer. No special drivers or software are
needed. If you can send an email, you can print from anywhere, using ePrint.
Once you have signed up for an account on HP Connected (www.hpconnected.com), you can
sign in to view your ePrint job status, manage your ePrint printer queue, control who can use
your printer's ePrint email address to print, and get help for ePrint.
HP Printables
●
HP Printables allow you to easily locate and print preformatted web content, directly from your
printer. You can also scan and store your documents digitally on the Web.
HP Printables provide a wide range of content, from store coupons to family activities, news,
travel, sports, cooking, photos, and many more. You can even view and print your online images
from popular photo sites.
Certain HP Printables also allow you to schedule the delivery of app content to your printer.
Preformatted content designed specifically for your printer means no cut-off text and pictures
and no extra pages with only one line of text. On some printers, you can also choose paper and
print quality settings on the print preview screen.
30
Chapter 4 Use Web Services
ENWW
Set up Web Services
Before you set up Web Services, make sure your printer is connected to the Internet using wireless
connection.
To set up Web Services, use one of the following methods.
To set up Web Services using the printer control panel
1.
From the printer control panel display, touch Setup.
2.
Touch Web Services Setup.
3.
Touch Accept to accept the Web Services terms of use and enable Web Services.
4.
In the Auto Update screen, touch Yes to allow the printer to automatically check for and install
product updates.
NOTE: If a printer update is available, the printer will download and install the update, and then
restart. You will have to repeat the instructions from step 1 to set up ePrint.
NOTE: If prompted for proxy settings and if your network uses proxy settings, follow the onscreen instructions to set up a proxy server. If you do not have the proxy details, contact your
network administrator or the person who set up the network.
5.
When the printer is connected to the server, the printer prints an information page. Follow the
instructions on the information page to finish the setup.
To set up Web Services using the embedded web server
1.
Open the EWS. For more information, see Open the embedded Web server on page 64.
2.
Click the Web Services tab.
3.
In the Web Services Settings section, click Setup, click Continue, and follow the on-screen
instructions to accept the terms of use.
4.
If prompted, choose to allow the printer to check for and install printer updates.
NOTE: If a printer update is available, the printer downloads and installs the update, and then
restarts. Repeat the instructions from step 1 to set up ePrint.
NOTE: If prompted for proxy settings and if your network uses proxy settings, follow the onscreen instructions to set up a proxy server. If you do not have the proxy details, contact your
network administrator or the person who set up the network.
5.
When the printer is connected to the server, the printer prints an information page. Follow the
instructions on the information page to finish the setup.
To set up Web Services using the HP printer software (Windows)
ENWW
1.
Open the HP printer software. For more information, see Open the HP printer software
(Windows) on page 16.
2.
In the window that appears, double-click Print & Scan and then select Connect Printer to the
Web under Print. The printer's home page (embedded web server) opens.
3.
Click the Web Services tab.
Set up Web Services
31
4.
In the Web Services Settings section, click Setup, click Continue, and follow the on-screen
instructions to accept the terms of use.
5.
If prompted, choose to allow the printer to check for and install printer updates.
NOTE: If a printer update is available, the printer will download and install the update, and then
restart. You will have to repeat the instructions from step 1 to set up ePrint.
NOTE: If prompted for proxy settings and if your network uses proxy settings, follow the onscreen instructions to set up a proxy server. If you do not have the details, contact your network
administrator or the person who set up the network.
6.
32
When the printer is connected to the server, the printer prints an information page. Follow the
instructions on the information page to finish the setup.
Chapter 4 Use Web Services
ENWW
Print with HP ePrint
HP ePrint is a free service from HP that allows you to print to your HP ePrint-enabled printer
anywhere you can send an email. Just send your documents and photos to the email address
assigned to your printer when you enable Web Services. No additional drivers or software are
needed.
●
Your printer needs to have a wireless network connection to the Internet. You will not be able to
use HP ePrint via a USB connection to a computer.
●
Attachments might print differently from the way they appear in the software program that
created them, depending on the original fonts and layout options used.
●
Free product updates are provided with HP ePrint. Some updates might be required to enable
certain functionality.
Once you have signed up for an account on HP Connected (www.hpconnected.com), you can sign in
to view your ePrint job status, manage your ePrint printer queue, control who can use your printer’s
ePrint email address to print, and get help for ePrint.
Before you can use ePrint, make sure that:
●
The printer is connected to an active network providing Internet access.
●
Web Services is turned on. If not, you will be prompted to turn it on.
To ePrint a document from anywhere
1.
2.
3.
Enable Web Services.
a.
From the Home screen, touch the
b.
Accept the Terms of Use, and then follow the onscreen instructions to enable Web
Services.
c.
Print the ePrint information page, and then follow the instructions on the page to sign up for
an ePrint account.
(ePrint) icon.
Find your ePrint email address.
a.
Touch the ePrint icon on the Home screen. You will see the Web Services Settings menu
on the printer display.
b.
The printer’s email address appears in the Web Services Settings menu.
Email your document to the printer for printing.
a.
Create a new email and attach the document to print.
b.
Send the email to the printer email address.
The printer prints the attached document.
NOTE: The ePrint server does not accept email print jobs if there are multiple email addresses
included in the "To" or "Cc" fields. Only enter the HP ePrint email address in the "To" field. Do
not enter any additional email addresses in the other fields.
ENWW
Print with HP ePrint
33
NOTE: The email will be printed once it is received. As with any email, there is no guarantee when
or whether it will be received. You can check the print status on HP Connected
(www.hpconnected.com).
NOTE: Documents printed with ePrint may appear different from the original. Style, formatting, and
text flow may differ from the original document. For documents that need to be printed with a higher
quality (such as legal documents), we recommend that you print from the software application on your
computer, where you will have more control over what your printout looks like.
Click here to go online for more information.
34
Chapter 4 Use Web Services
ENWW
Use HP Printables
Print pages from the web, without using a computer, by setting up HP Printables, a free service from
HP. You can print coloring pages, calendars, puzzles, recipes, maps, and more, depending on the
apps available in your country/region.
Go to the HP Connected website for more information and specific terms and conditions:
www.hpconnected.com.
ENWW
Use HP Printables
35
Use the HP Connected website
Use HP’s free HP Connected website to set up increased security for HP ePrint, and specify the
email addresses that are allowed to send email to your printer. You can also get product updates,
more apps, and other free services.
Go to the HP Connected website for more information and specific terms and conditions:
www.hpconnected.com.
36
Chapter 4 Use Web Services
ENWW
Remove Web Services
To remove Web Services
1.
From the printer control panel display, touch
(ePrint), and then touch
(Web Services
Settings).
2.
ENWW
Touch Remove Web Services.
Remove Web Services
37
Tips for using Web Services
Use the following tips to print apps and use HP ePrint.
Tips for printing apps and using HP ePrint
38
●
Learn how to share your photos online and order prints. Click here to go online for more
information.
●
Learn about apps for printing recipes, coupons, and other content from the web, simply and
easily. Click here to go online for more information.
Chapter 4 Use Web Services
ENWW
5
ENWW
Copy and scan
●
Copy documents
●
Scan
●
Tips for copy and scan success
39
Copy documents
The Copy menu on the printer display allows you to easily select number of copies and color or black
and white for copying on plain paper. You can also easily access advanced settings, such as
changing the paper type and size, adjusting the darkness of the copy, and resizing the copy.
Make a 1-sided copy
1.
Load the original print side down on the right front corner of the scanner glass.
2.
Specify number of copies and settings.
3.
●
From the Home screen, touch Copy. Flick to the desired number of copies.
●
If the value for the 2–Sided option is 1:2, touch to select 1:1.
●
Touch
(Settings) to specify paper size, paper type, quality, or other settings.
●
Touch
(Back) to return to the Copy screen.
Touch Black or Color to start the copy job.
Make a 2-sided copy
1.
Load the original print side down on the right front corner of the scanner glass.
2.
Specify number of copies and settings.
●
From the Home screen, touch Copy. Flick to the desired number of copies.
●
If the value for the 2–Sided option is 1:1, touch to select 1:2.
●
(Settings), scroll through the options, and then touch Resize to make sure Actual
Touch
is selected.
NOTE: The 2-sided function does not work if the Fit to Page option is selected.
40
●
From the Settings screen, specify paper size, paper type, quality, or other settings.
●
Touch
(Back) to return to the Copy screen.
3.
Touch Black or Color to start the copy job.
4.
When prompted, load the second original and touch OK.
Chapter 5 Copy and scan
ENWW
Scan
You can scan documents, photos, and other paper types, and send them to a variety of destinations,
such as a computer or an email recipient.
When scanning documents with the HP printer software, you can scan to a format that can be
searched and edited.
NOTE:
Some scan functions are only available after you have installed the HP printer software.
●
Scan to a computer
●
Scan to a memory device
●
Scan to Email
●
Scan using Webscan
Scan to a computer
Before scanning to a computer, make sure you have already installed the HP recommended printer
software. The printer and computer must be connected and turned on.
In addition, on Windows computers, the printer software must be running prior to scanning.
To enable the scan to a computer feature (Windows)
The scan to a computer feature is enabled by default from the factory. Follow these instructions if the
feature has been disabled, and you wish to enable it again.
1.
Open the HP printer software.
2.
Go to the Scan section.
3.
Select Manage Scan to Computer.
4.
Click Enable.
To enable the scan to a computer feature (OS X)
The scan to a computer feature is enabled by default from the factory. Follow these instructions if the
feature has been disabled, and you wish to enable it again.
1.
Open HP Utility.
2.
Under Scan Settings, click Scan to Computer.
3.
Ensure that Enable Scan to Computer is selected.
To scan an original from the printer control panel
ENWW
1.
Load the original print side down on the right front corner of the scanner glass.
2.
Touch Scan, and then select Computer.
3.
Touch a computer that you want to scan to.
Scan
41
4.
Choose the type of scan shortcut you want.
5.
Touch Start Scan.
To scan an original from HP printer software (Windows)
1.
Load the original print side down on the right front corner of the scanner glass.
2.
Click the Print & Scan tab.
3.
In the Scan area, click Scan a Document or Photo.
4.
Select the type of scan that you want from the shortcut menu and then click Scan.
NOTE: If Show Scan Preview is selected, you can make adjustments to the scanned image in
the preview screen.
5.
Select Save if you want to keep the application open for another scan, or select Done to exit the
application.
6.
Click Scan.
After the scan is saved, Windows Explorer opens the directory with the saved scan.
To scan an original from HP printer software (OS X)
1.
Open HP Scan.
HP Scan is located in the Applications/Hewlett-Packard folder at the top level of the hard disk.
2.
Choose the type of scan profile you want and follow the on-screen instructions.
Scan to a memory device
You can scan directly to a memory card or USB flash drive from the printer control panel without
using a computer or the HP printer software provided with the printer.
To scan an original to a memory device from the printer control panel
42
1.
Load the original print side down on the right front corner of the scanner glass.
2.
Insert a memory device.
3.
Touch Scan, and then select Memory Device.
4.
Make changes to scan options, if needed.
5.
Touch Start Scan.
Chapter 5 Copy and scan
ENWW
Scan to Email
The Scan-to-Email App is an application that allows you to quickly scan and email photos or
documents to the specified recipients directly from your HP e-All-in-One printer. You can set up your
email addresses, log in to your accounts with the given PIN codes, and then scan and email your
documents.
This section contains the following topics:
●
Set up Scan to Email
●
Use Scan to Email
●
Change account settings
Set up Scan to Email
To set up Scan to Email
1.
Touch Scan, and then touch Email.
2.
On the Welcome screen, touch Continue.
3.
Touch in the Email: box to enter your email address, and then touch Done.
4.
Touch Continue.
5.
A PIN will be sent to the email address you entered. Touch Continue.
6.
Touch the PIN to enter your PIN and then touch Done.
7.
Touch Store Email or Auto-login, depending upon how you want the printer to store your login
information.
8.
Select your scan type by touching Photo or Document.
9.
For photos, select the can settings, and touch Continue.
For documents, continue with the next step.
10. Veriify the email information, and touch Continue.
11. Touch Scan to Email.
12. Touch OK when the scan completes, and then touch Yes to send another email, or No to finish.
Use Scan to Email
To use Scan to Email
1.
Load the original print side down on the right front corner of the scanner glass.
2.
Touch Scan, and then touch Email.
3.
On the control panel display, select the account that you want to use, and touch Continue.
NOTE: Select My account is not listed if you do not have an account. You will be prompted to
enter your email address and receive a PIN.
4.
ENWW
If prompted, enter the PIN.
Scan
43
5.
Select your scan type by touching Photo or Document.
6.
For photos, select the can settings, and touch Continue.
For documents, continue with the next step.
7.
To add or remove recipients, touch Modify Recipient(s), and when finished touch Done.
8.
Verify the email information and touch Continue.
9.
Touch Scan to Email.
10. Touch OK when the scan completes, and then touch Yes to send another email, or No to finish.
Change account settings
To change account settings
1.
Touch Scan, and then touch Email.
2.
On the control panel display, select the account that you want to change, and touch Modify.
3.
Select which setting you want to modify, and follow the onscreen prompts.
●
Auto-login
●
Store Email
●
Remove from list
●
Change PIN
●
Delete Account
Scan using Webscan
Webscan is a feature of the embedded web server that lets you scan photos and documents from
your printer to your computer using a web browser.
This feature is available even if you did not install the printer software on your computer.
NOTE:
By default, Webscan is off. You can enable this feature from the EWS.
If you are unable to open Webscan in the EWS, your network administrator might have turned it off.
For more information, contact your network administrator or the person who set up your network.
To enable Webscan
44
1.
Open the embedded web server. For more information, see Open the embedded Web server
on page 64.
2.
Click the Settings tab.
3.
In the Security section, click Administrator Settings.
4.
Select Webscan to enable Webscan.
5.
Click Apply and then click OK.
Chapter 5 Copy and scan
ENWW
To scan using Webscan
Scanning using Webscan offers basic scan options. For additional scan options or functionality, scan
from the HP printer software.
ENWW
1.
Load the original print side down on the right front corner of the scanner glass.
2.
Open the embedded web server. For more information, see Open the embedded Web server
on page 64.
3.
Click the Scan tab.
4.
Click Webscan in the left pane, change any settings, and then click Start Scan.
Scan
45
Tips for copy and scan success
Use the following tips to copy and scan successfully:
46
●
Learn how to scan to email from the printer display. Click here to go online for more information.
●
Keep the glass and the back of the lid clean. The scanner interprets anything it detects on the
glass as part of the image.
●
Load your original, print side down, on the right front corner of the glass.
●
To make a large copy of a small original, scan the original into the computer, resize the image in
the scanning software, and then print a copy of the enlarged image.
●
If you want to adjust scan size, output type, scan resolution, or file type, and so on, start scan
from the printer software.
●
To avoid incorrect or missing scanned text, make sure the brightness is set appropriately in the
software.
●
If you want to scan a document with several pages into one file instead of multiple files, start the
scan with the printer software instead of selecting Scan from the printer display.
Chapter 5 Copy and scan
ENWW
6
ENWW
Work with cartridges
●
Check the estimated ink levels
●
Replace the cartridges
●
Order ink supplies
●
Use single-cartridge mode
●
Cartridge warranty information
●
Anonymous usage information storage
●
Tips for working with cartridges
47
Check the estimated ink levels
To check the estimated ink levels from the printer control panel
▲
From the Home screen, touch the
(Ink icon) to display the estimated ink levels.
To check the ink levels from the printer software (Windows)
1.
Open the HP printer software.
2.
In the printer software, click Estimated Ink Levels.
To check the ink levels from HP Utility
1.
Open HP Utility.
HP Utility is located in the Hewlett-Packard folder in the Applications folder at the top level of the
hard disk.
2.
Select the HP ENVY 5660 series from the list of devices at the left of the window.
3.
Click Supplies Status.
The estimated ink levels appear.
4.
Click All Settings to return to the Information and Support pane.
NOTE: If you have installed a refilled or remanufactured cartridge, or a cartridge that has been used
in another printer, the ink level indicator might be inaccurate or unavailable.
NOTE: Ink level warnings and indicators provide estimates for planning purposes only. When you
receive a low-ink warning message, consider having a replacement cartridge available to avoid
possible printing delays. You do not have to replace the cartridges until the print quality is
unacceptable.
NOTE: Ink from the cartridges is used in the printing process in a number of different ways,
including in the initialization process, which prepares the product and cartridges for printing, and in
printhead servicing, which keeps print nozzles clear and ink flowing smoothly. In addition, some
residual ink is left in the cartridge after it is used. For more information, see www.hp.com/go/
inkusage.
48
Chapter 6 Work with cartridges
ENWW
Replace the cartridges
To replace the cartridges
1.
Check that power is on.
2.
Remove the old cartridge.
3.
ENWW
a.
Open the access door.
b.
Remove the cartridge from the slot.
Insert a new cartridge.
a.
Remove the cartridge from packaging.
b.
Remove plastic tape using the pull tab.
Replace the cartridges
49
c.
4.
Slide the new cartridge in the slot until it clicks.
Close the cartridge access door.
NOTE: The HP printer software prompts you to align the ink cartridges when you print a
document after installing a new ink cartridge.
50
Chapter 6 Work with cartridges
ENWW
Order ink supplies
Before ordering cartridges, locate the correct cartridge number.
Locate the cartridge number on the printer
▲
The cartridge number is located inside the cartridge access door.
Locate the cartridge number in the printer software
1.
2.
Depending on your operating system, do one of the following to open the printer software:
●
Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select
the printer name.
●
Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar,
and then select the printer name.
●
Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start,
select All Programs, click HP, click the folder for the printer, and then select the icon with
the printer's name.
In the printer software, click Shop, and then click Shop For Supplies Online.
The correct cartridge number appears when you use this link.
To find the print cartridge reorder numbers
1.
Open HP Utility.
NOTE: HP Utility is located in the Hewlett-Packard folder in the Applications folder at the top
level of the hard disk.
2.
Click Supplies Info.
The print cartridge ordering numbers appear.
3.
Click All Settings to return to the Information and Support pane.
To order original HP supplies for the HP ENVY 5660 series, go to www.hp.com/buy/supplies. If
prompted, choose your country/region, and then follow the prompts to find the right cartridges for your
printer.
NOTE: Ordering ink cartridges online is not supported in all countries/regions. If it is not available in
your country/region, you may still view supplies information and print a list for reference when
shopping at a local HP reseller.
ENWW
Order ink supplies
51
Use single-cartridge mode
Use the single-cartridge mode to operate the HP ENVY 5660 series with only one ink cartridge. The
single-cartridge mode is initiated when an ink cartridge is removed from the ink cartridge carriage.
During single-cartridge mode, the printer can copy documents, copy photos, and print jobs from the
computer.
NOTE: When the HP ENVY 5660 series operates in single-cartridge mode, a message is displayed
on the printer display. If the message is displayed and two ink cartridges are installed in the printer,
verify that the protective piece of plastic tape has been removed from each ink cartridge. When
plastic tape covers the ink cartridge contacts, the printer cannot detect that the ink cartridge is
installed.
Exit single-cartridge mode
●
52
Install two ink cartridges in the HP ENVY 5660 series to exit single-cartridge mode.
Chapter 6 Work with cartridges
ENWW
Cartridge warranty information
The HP cartridge warranty is applicable when the cartridge is used in its designated HP printing
device. This warranty does not cover HP ink cartridges that have been refilled, remanufactured,
refurbished, misused, or tampered with.
During the warranty period the cartridge is covered as long as the HP ink is not depleted and the end
of warranty date has not been reached. The end of warranty date, in YYYY/MM format, may be found
on the cartridge as indicated:
For a copy of the HP Limited Warranty Statement for the printer, see the printed documentation that
came with the product.
ENWW
Cartridge warranty information
53
Anonymous usage information storage
The HP cartridges used with this printer contain a memory chip that assists in the operation of the
printer. In addition, this memory chip stores a limited set of anonymous information about the usage
of the printer, which might include the following: the number of pages printed using the cartridge, the
page coverage, frequency of printing, and the printing modes used.
This information helps HP design future printers to meet our customers' printing needs. The data
collected from the cartridge memory chip does not contain information that can be used to identify a
customer or user of the cartridge or their printer.
HP collects a sampling of the memory chips from cartridges returned to HP's free return and recycling
program (HP Planet Partners: www.hp.com/recycle). The memory chips from this sampling are read
and studied in order to improve future HP printers. HP partners who assist in recycling this cartridge
might have access to this data, as well.
Any third party possessing the cartridge might have access to the anonymous information on the
memory chip. If you prefer to not allow access to this information, you can render the chip inoperable.
However, after you render the memory chip inoperable, the cartridge cannot be used in an HP printer.
If you are concerned about providing this anonymous information, you can make this information
inaccessible by turning off the memory chip's ability to collect the printer's usage information.
To disable the usage information function
1.
From the printer control panel, touch Setup.
2.
Touch Preferences.
3.
Flick to the end of the option list and switch off the Automatically Send Anonymous Data and
Store Anonymous Usage Information options.
NOTE: You can continue to use the cartridge in the HP printer if you turn off the memory chip's
ability to collect the printer's usage information.
54
Chapter 6 Work with cartridges
ENWW
Tips for working with cartridges
Use the following tips to work with cartridges:
ENWW
●
To protect the cartridges from drying out, always turn the printer off using the On button, and
wait until the On button light goes out.
●
Do not open or untape cartridges until you are ready to install them. Leaving tape on the
cartridges reduces ink evaporation.
●
Insert the cartridges into the correct slots. Match the color and icon of each cartridge to the color
and icon for each slot. Make sure the cartridges snap into place.
●
Alignment is automatic after new cartridge installation. Alignment can also help later, in cases of
blurred or jagged lines. See Fix print quality issues on page 77 for more information.
●
When the Estimated Ink Levels screen shows one or both cartridges in a low state, consider
getting replacement cartridges to avoid possible printing delays. You do not need to replace the
cartridges until print quality becomes unacceptable. See Replace the cartridges on page 49 for
more information.
●
If you remove a cartridge from the printer for any reason, try to replace it again as soon as
possible. Outside of the printer, if unprotected, cartridges begin to dry out.
Tips for working with cartridges
55
7
Connect Your Printer
Additional advanced settings are available from the printer's home page (embedded web server or
EWS). For more information, see Open the embedded Web server on page 64.
This section contains the following topics:
56
●
Set up the printer for wireless communication
●
Change network settings
●
Advanced printer management tools (for networked printers)
●
Tips for setting up and using a networked printer
Chapter 7 Connect Your Printer
ENWW
Set up the printer for wireless communication
●
Before you begin
●
Set up the printer on your wireless network
●
Change the connection type
●
Test the wireless connection
●
Turn on or off the wireless capability of the printer
●
Connect wirelessly to the printer without a router
Before you begin
Ensure the following:
●
The wireless network is set up and working properly.
●
The printer and the computers that use the printer are on the same network (subnet).
While connecting the printer, you might be prompted to enter the wireless network name (SSID) and
a wireless password.
●
The wireless network name is the name of your wireless network.
●
The wireless password prevents other people from connecting to your wireless network without
your permission. Depending on the level of security required, your wireless network might use
either a WPA passphrase or WEP key.
If you have not changed the network name or the security passkey since setting up your wireless
network, you can sometimes find them on the back or side of the wireless router.
If you cannot find the network name or the security password or cannot remember this information,
see the documentation provided with your computer or with the wireless router. If you still cannot find
this information, contact your network administrator or the person who set up the wireless network.
Set up the printer on your wireless network
Use the Wireless Setup Wizard from the printer control panel display to set up wireless
communication.
NOTE:
ENWW
Before you proceed, go through the list at Before you begin on page 57.
1.
From the printer control panel, touch
2.
Touch
3.
Touch Wireless Settings.
4.
Touch Wireless Setup Wizard.
5.
Follow the display instructions to complete the setup.
(Wireless).
(Settings.
Set up the printer for wireless communication
57
Change the connection type
After you have installed the HP printer software and connected the printer to your computer or to a
network, you can use the software to change the connection type (for example, from a USB
connection to a wireless connection).
NOTE:
Connecting an Ethernet cable turns off the wireless capability of the printer.
To change from a USB connection to a wireless network (Windows)
Before you proceed, go through the list at Before you begin on page 57.
1.
Depending on your operating system, do one of the following:
●
Windows 8.1: Click the down arrow in lower left corner of the Start screen, select the printer
name, and then click Utilities.
●
Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar,
select the printer name, and then click Utilities.
●
Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start,
select All Programs, click HP, click the folder of your printer.
2.
Click Printer Setup & Software.
3.
Select Convert a USB connected printer to wireless. Follow the on-screen instructions.
Learn more about how to change from a USB to wireless connection. Click here to go online for
more information. At this time, this website might not be available in all languages.
Test the wireless connection
Print the wireless test report for information about the printer wireless connection. The wireless test
report provides information about the printer status, hardware (MAC) address, and IP address. If the
printer is connected to a network, the test report displays details about the network settings.
To print the wireless test report
1.
From the printer control panel, touch
2.
Touch Print Reports
3.
Touch Wireless Test Report.
(Wireless), and then touch
(Settings).
Turn on or off the wireless capability of the printer
The blue Wireless light on the printer control panel is lit when the wireless capability of the printer is
on.
58
1.
From the printer control panel, touch Setup and then touch Network Setup.
2.
Touch Wireless Settings.
3.
Touch Wireless to turn it on or off.
Chapter 7 Connect Your Printer
ENWW
Connect wirelessly to the printer without a router
With Wi-Fi Direct, you can print wirelessly from a computer, smart phone, tablet, or other wirelesscapable device—without connecting to an existing wireless network.
Guidelines for using Wi-Fi Direct
●
Make sure your computer or mobile device has the necessary software.
If you are using a computer, make sure you have installed the printer software provided with the
printer.
●
If you have not installed the HP printer software on the computer, connect to Wi-Fi Direct first
and then install the printer software. Select Wireless when prompted by the printer software for a
connection type.
●
If you are using a mobile device, make sure you have installed a compatible printing app. For
more information about mobile printing, visit www.hp.com/global/us/en/eprint/
mobile_printing_apps.html.
●
Make sure Wi-Fi Direct is turned on in the printer and, if necessary, security is enabled.
●
Up to five computers and mobile devices can use the same Wi-Fi Direct connection.
●
Wi-Fi Direct can be used while the printer is also connected either to a computer using a USB
cable or to a network using a wireless connection.
●
Wi-Fi Direct cannot be used to connect a computer, mobile device, or printer to the Internet.
To print from a wireless-capable mobile device
Make sure you have installed a compatible printing app on your mobile device. For more information,
visit www.hp.com/global/us/en/eprint/mobile_printing_apps.html.
1.
Make sure you have turned on Wi-Fi Direct on the printer.
2.
Turn on the Wi-Fi connection on your mobile device. For more information, see the
documentation provided with the mobile device.
NOTE: If your mobile device does not support Wi-Fi, you are not able to use Wi-Fi Direct.
3.
From the mobile device, connect to a new network. Use the process you normally use to
connect to a new wireless network or hotspot. Choose the Wi-Fi Direct name from the list of
wireless networks shown such as DIRECT-**- HP ENVY-5660 (where ** are the unique
characters to identify your printer).
Enter the Wi-Fi Direct password when prompted.
4.
Print your document.
To print from a wireless-capable computer (Windows)
1.
Make sure you have turned on Wi-Fi Direct on the printer.
2.
Turn on the computer's Wi-Fi connection. For more information, see the documentation provided
with the computer.
NOTE: If your computer does not support Wi-Fi, you are not able to use Wi-Fi Direct.
ENWW
Set up the printer for wireless communication
59
3.
From the computer, connect to a new network. Use the process you normally use to connect to
a new wireless network or hotspot. Choose the Wi-Fi Direct name from the list of wireless
networks shown such as DIRECT-**- HP ENVY-5660 (where ** are the unique characters to
identify your printer and XXXX is the printer model located on the printer).
Enter the Wi-Fi Direct password when prompted.
4.
Proceed to step 5 if the printer has been installed and connected to the computer over a wireless
network. If the printer has been installed and connected to your computer with a USB cable,
follow the steps below to install the printer software using the HP Wi-Fi Direct connection.
a.
Depending on your operating system, do one of the following:
●
Windows 8.1: Click the down arrow in lower left corner of the Start screen, select the
printer name, and then click Utilities.
●
Windows 8: Right-click an empty area on the Start screen, click All Apps on the app
bar, select the printer name, and then click Utilities.
●
Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start,
select All Programs, click HP, click the folder of your printer.
b.
Click Printer Setup & Software, and then select Connect a new printer.
c.
When the Connection Options software screen appears, select Wireless.
Select your HP printer software from the list of detected printers.
d.
5.
Follow the on-screen instructions.
Print your document.
To print from a wireless-capable computer (OS X)
1.
Make sure you have turned on Wi-Fi Direct on the printer.
2.
Turn on Wi-Fi on the computer.
For more information, see the documentation provided by Apple.
3.
Click the Wi-Fi icon and choose the Wi-Fi Direct name, such as DIRECT-**- HP ENVY-5660
(where ** are the unique characters to identify your printer and XXXX is the printer model
located on the printer).
If Wi-Fi Direct is turned on with security, enter the password when prompted.
4.
60
Add the printer.
a.
Open System Preferences.
b.
Depending on your operating system, click Print & Fax, Print & Scan, or Printers &
Scanners in the Hardware section.
c.
Click + below the list of printers at the left.
d.
Select the printer from the list of detected printers (the word “Bonjour” is listed the right
column beside the printer name), and click Add.
Chapter 7 Connect Your Printer
ENWW
Click here for online troubleshooting for Wi-Fi Direct, or for more help with setting up Wi-Fi Direct.
At this time, this website might not be available in all languages.
ENWW
Set up the printer for wireless communication
61
Change network settings
From the printer control panel, you can set up and manage your printer wireless connection and
perform a variety of network management tasks. This includes viewing and changing network
settings, restoring network defaults, and turning the wireless function on or off.
CAUTION: Network settings are provided for your convenience. However, unless you are an
advanced user, you should not change some of these settings (such as the link speed, IP settings,
default gateway, and firewall settings).
To print the network configuration page
1.
From the printer control panel, touch Setup.
2.
Touch Reports and then touch Network Configuration Report.
To change IP settings
The default IP setting for the IP settings is Automatic, which sets the IP settings automatically. If you
are an advanced user and want to use different settings (such as the IP address, subnet mask, or the
default gateway), you can change them manually.
CAUTION: Be careful when manually assigning an IP address. If you enter an invalid IP address
during the installation, your network components cannot connect with the printer.
62
1.
From the printer control panel, touch Setup and then touch Network Setup.
2.
Touch Wireless Settings.
3.
Touch Advanced Settings.
4.
Touch IP Settings.
5.
A message appears warning that changing the IP address removes the printer from the network.
Touch OK to continue.
6.
Automatic is selected by default. To change the settings manually, touch Manual, and then enter
the appropriate information for the following settings:
●
IP Address
●
Subnet Mask
●
Default Gateway
●
DNS Address
7.
Enter your changes, and then touch Done.
8.
Touch OK.
Chapter 7 Connect Your Printer
ENWW
Advanced printer management tools (for networked printers)
To view or change some settings, you might need a password.
NOTE: You can open and use the embedded Web server without being connected to the Internet.
However, some features are not available.
This section contains the following topics:
●
Toolbox (Windows)
●
HP Utility (OS X)
●
Open the embedded Web server
●
About cookies
Toolbox (Windows)
The Toolbox provides maintenance information about the printer.
NOTE: The Toolbox can be installed from the HP Software CD if the computer meets the system
requirements. System requirements can be found in the Readme file, which is available on the HP
printer software CD provided with your printer.
To open the Toolbox
1.
Depending on your operating system, do one of the following:
●
Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select
the printer name.
●
Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar,
and then select the printer name.
●
Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start,
select All Programs, click HP, click the folder for the printer, and then select the icon with
the printer's name.
2.
Click Print & Scan.
3.
Click Maintain Your Printer.
HP Utility (OS X)
HP Utility contains tools to configure print settings, calibrate the printer, order supplies online, and find
website support information.
NOTE:
The features available in HP Utility vary depending on the selected printer.
Ink level warnings and indicators provide estimates for planning purposes only. When you receive
a low-ink warning message, consider having a replacement cartridge available to avoid possible
printing delays. You do not need to replace cartridges until the print quality becomes unacceptable.
Double-click HP Utility in the Hewlett-Packard folder in the Applications folder at the top level of the
hard disk.
ENWW
Advanced printer management tools (for networked printers)
63
Open the embedded Web server
You can access the embedded Web server via either the network or Wi-Fi Direct.
To open the embedded Web server via network
NOTE: The printer must be on a network and must have an IP address. The IP address for the
printer can be found by pressing the Wireless icon or by printing a network configuration page.
●
In a supported Web browser on your computer, type the IP address or hostname that has been
assigned to the printer.
For example, if the IP address is 192.168.0.12, type the following address into a Web browser:
http://192.168.0.12.
To open the embedded Web server using Wi-Fi Direct
1.
From the Home screen, touch
2.
If the display shows that Wi-Fi Direct is Off, touch Wi-Fi Direct and then switch it on.
3.
From your wireless computer, turn wireless on, search for and connect to the Wi-Fi Direct name,
for example: DIRECT-**- HP ENVY-5660 (where ** are the unique characters to identify your
printer). Enter the Wi-Fi Direct password when prompted.
4.
In a supported Web browser on your computer, type the following address: http://192.168.223.1.
(Wireless) and then touch
(Settings).
About cookies
The embedded Web server (EWS) places very small text files (cookies) on your hard drive when you
are browsing. These files let the EWS recognize your computer the next time you visit. For example,
if you have configured the EWS language, a cookie helps remember which language you have
selected so that the next time you access the EWS, the pages are displayed in that language. Some
cookies (such as the cookie that stores customer-specific preferences) are stored on the computer
until you clear them manually.
You can configure your browser to accept all cookies, or you can configure it to alert you every time a
cookie is offered, which allows you to decide which cookies to accept or refuse. You can also use
your browser to remove unwanted cookies.
NOTE: Depending on your printer, if you disable cookies, you also disable one or more of the
following features:
●
Starting where you left the application (especially useful when using setup wizards)
●
Remembering the EWS browser language setting
●
Personalizing the EWS Home page
For information about how to change your privacy and cookie settings and how to view or delete
cookies, see the documentation available with your Web browser.
64
Chapter 7 Connect Your Printer
ENWW
Tips for setting up and using a networked printer
Use the following tips to set up and use a networked printer:
●
When setting up the wireless networked printer, make sure your wireless router is powered on.
The printer searches for wireless routers, then lists the detected network names on the display.
NOTE: If your printer has not been setup with a wireless connection, touch
(Wireless) and
(Settings) on the printer display to start the Wireless Setup Wizard.
then touch
ENWW
●
(Wireless) on the control panel to
To check the wireless connection on the printer, touch the
open the Wireless Summary menu. If it shows Wireless Off or Not Connected, touch
(Settings) and then touch Wireless Setup Wizard. Follow the on-screen instructions to set up
your printer wireless connection.
●
If your computer is connected to a Virtual Private Network (VPN), you need to disconnect from
the VPN before you can access any other device on your network, including the printer.
●
Learn more about configuring your network and the printer for wireless printing. Click here to go
online for more information.
●
Learn how to find your network security settings. Click here to go online for more information.
●
Learn about the Print and Scan Doctor (Windows only) and other troubleshooting tips. Click here
to go online for more information.
●
Learn how to change from a USB to wireless connection. Click here to go online for more
information.
●
Learn how to work with your firewall and anti-virus programs during printer setup. Click here to
go online for more information.
Tips for setting up and using a networked printer
65
8
Solve a problem
This section contains the following topics:
66
●
Jams and paper-feed issues
●
Ink cartridge issues
●
Printing issues
●
Copy issues
●
Scan issues
●
Network and connection issues
●
Printer hardware issues
●
HP support
Chapter 8 Solve a problem
ENWW
Jams and paper-feed issues
What do you want to do?
Clear a paper jam
Solve paper jam
issues.
NOTE:
Use an HP online troubleshooting wizard
Instructions for clearing the jam in the printer or in the automatic document feeder and resolving issues
with paper or the paper feed.
The HP online troubleshooting wizards may not be available in all languages.
Read general instructions in the Help for clearing paper jams
Paper jams can occur in several locations inside the printer.
CAUTION:
To prevent possible damage to the printhead, clear paper jams as soon as possible.
To clear an internal paper jam
CAUTION: Avoid pulling jammed paper from the front of the printer. Instead follow the steps below
to clear the jam. Pulling out jammed paper from the front of the printer might cause the paper to tear
and leave torn pieces inside the printer; this could result in more jams later.
1.
Press the
2.
Open the ink cartridge access door.
3.
Check the paper path inside the printer.
a.
ENWW
(Power button) to turn the printer off.
Lift the handle of the paper path cover and remove the cover.
Jams and paper-feed issues
67
b.
Locate any jammed paper inside the printer, grasp it with both hands and pull it towards
you.
CAUTION: If the paper tears when you are removing it from the rollers, check the rollers
and wheels for torn pieces of paper that might be remaining inside the printer.
If you do not remove all the pieces of paper from the printer, more paper jams are likely to
occur.
c.
4.
Reinsert the paper path cover until it snaps into place.
If the problem is not resolved, check the print carriage area inside the printer.
CAUTION:
a.
During the process, avoid touching the cable attached to the print carriage.
If there is any jammed paper, move the print carriage to the far right of the printer, grasp the
jammed paper with both hands, and then pull it towards you.
CAUTION: If the paper tears when you are removing it from the rollers, check the rollers
and wheels for torn pieces of paper that might be remaining inside the printer.
If you do not remove all the pieces of paper from the printer, more paper jams are likely to
occur.
b.
5.
Close the ink cartridge access door.
6.
If the problem is still not resolved, check the tray area.
a.
68
Move the carriage to the far left of the printer, and do the same as in the previous step to
remove any torn pieces of paper.
Pull out the input tray to extend it.
Chapter 8 Solve a problem
ENWW
b.
Carefully turn the printer on its side to expose the bottom of the printer.
c.
Check the gap in the printer where the input tray was. If there is any jammed paper, reach
into the gap, grasp the paper with both hands and pull it towards you.
CAUTION: If the paper tears when you are removing it from the rollers, check the rollers
and wheels for torn pieces of paper that might be remaining inside the printer.
If you do not remove all of the pieces of paper from the printer, more paper jams are likely
to occur.
7.
d.
Carefully turn the printer up again.
e.
Push the paper tray back in.
Press the
(Power button) again to turn the printer on.
Clear a print carriage jam
Resolve a print carriage jam.
Use an HP online troubleshooting wizard
If something is blocking the print carriage or it does not move
easily, get step-by-step instructions.
NOTE:
ENWW
The HP online troubleshooting wizards may not be available in all languages.
Jams and paper-feed issues
69
Read general instructions in the Help for clearing a print carriage jams
1.
Remove any objects, such as paper, that are blocking the print carriage.
NOTE: Do not use any tools or other devices to remove jammed paper. Always use caution
when removing jammed paper from inside the printer
2.
To get help from the print display, touch Help from the Home screen. Touch the directional
button to navigate through help topics, touch Troubleshoot and Support, and then touch Clear
Carriage Jam.
Learn how to avoid paper jams
To help avoid paper jams, follow these guidelines.
●
Remove printed papers from the output tray frequently.
●
Make sure that you are printing with paper that is not wrinkled, folded, or damaged.
●
Prevent curled or wrinkled paper by storing all unused paper flat in a resealable bag.
●
Do not use paper that is too thick or too thin for the printer.
●
Make sure that the trays are loaded correctly and are not too full. For more information, see
Load media on page 11.
●
Ensure that paper loaded in the input tray lays flat and the edges are not bent or torn.
●
Do not combine different paper types and paper sizes in the input tray; the entire stack of paper
in the input tray must be the same size and type.
●
Adjust the paper-width guides in the input tray to fit snugly against all paper. Make sure the
paper-width guides do not bend the paper in the input tray.
●
Do not force paper too far inside the input tray.
●
If you are printing on both sides of a page, do not print highly saturated images on light weight
paper.
●
Use paper types that are recommended for the printer. For more information, see Paper basics
on page 8.
●
If the printer is about to run out of paper, allow the printer to run out of paper first, and then add
paper. Do not load paper when the printer is printing.
Solve paper-feed problems
What kind of problem are you having?
●
70
Paper is not picked up from a tray
Chapter 8 Solve a problem
ENWW
●
●
ENWW
◦
Make sure paper is loaded in the tray. For more information, see Load media on page 11.
Fan the paper before loading.
◦
Make sure the paper-width guides are set to the correct markings in the tray for the paper
size you are loading. Also make sure the paper guides are snug, but not tight, against the
stack.
◦
Make sure paper in the tray is not curled. Uncurl paper by bending it in the opposite
direction of the curl.
Pages are skewing
◦
Make sure the paper loaded in the input tray is aligned to the paper-width guides. If
needed, pull out the input tray from the printer and reload the paper correctly, making sure
that the paper guides are aligned correctly.
◦
Load paper into the printer only when it is not printing.
Multiple pages are being picked up
◦
Make sure the paper-width guides are set to the correct markings in the tray for the paper
size you are loading. Also make sure the paper-width guides are snug, but not tight, against
the stack.
◦
Make sure the tray is not overloaded with paper.
◦
Use HP paper for optimum performance and efficiency.
Jams and paper-feed issues
71
Ink cartridge issues
First try removing and reinserting the ink cartridges. Make sure the cartridges are in the correct slots.
If this does not work, clean the cartridge contacts. If your problem is still not resolved, see Replace
the cartridges on page 49 for more information.
To clean cartridge contacts
CAUTION: The cleaning procedure should take only a few minutes. Make sure that the ink
cartridges are reinstalled in the product as soon as possible. It is not recommended to leave the ink
cartridges outside of the product longer than 30 minutes. This could result in damage to the ink
cartridges.
1.
Check that power is on.
2.
Open the cartridge access door.
3.
Remove the cartridge indicated in the error message.
4.
Hold the ink cartridge by its sides with the bottom pointing up and locate the electrical contacts
on the ink cartridge. The electrical contacts are the small gold-colored dots on the ink cartridge.
5.
Feature
Description
1
Electrical contacts
Wipe only the contacts with a damp lint-free cloth.
CAUTION: Be careful to touch only the contacts, and do not smear any of the ink or other
debris elsewhere on the cartridge.
72
6.
On the inside of the printer, locate the contacts in the print carriage. The contacts look like a set
of gold-colored bumps positioned to meet the contacts on the ink cartridge.
7.
Use a dry swab or lint-free cloth to wipe the contacts.
8.
Reinstall the ink cartridge.
Chapter 8 Solve a problem
ENWW
9.
Close the access door, and check if the error message has gone away.
10. If you still receive the error message, turn the product off, and then on again.
NOTE: If one ink cartridge is causing problems, you can remove it and use the single-cartridge
mode to operate the HP ENVY 5660 series with only one cartridge.
ENWW
Ink cartridge issues
73
Printing issues
What do you want to do?
Fix problems with page not printing (unable to print)
HP Print and Scan Doctor
The HP Print and Scan Doctor is a utility that will try to diagnose and fix the issue
automatically.
Troubleshoot problems with print
jobs not printing.
Use an HP online troubleshooting wizard
Get step-by-step instructions if the printer is not responding or printing.
NOTE: The HP Print and Scan Doctor and the HP online troubleshooting wizards may not be
available in all languages.
Read general instructions in the Help for unable to print issues
Resolve print issues
NOTE: Make sure that the printer is turned on and that there is paper in the tray. If you are still
unable to print, try the following in order:
1.
Check for error messages from the printer display and resolve them by following the onscreen
instructions.
2.
If your computer is connected to the printer with a USB cable, disconnect and reconnect the
USB cable. If your computer is connected to the printer with a wireless connection, confirm that
the connection is working.
3.
Verify that the printer is not paused or offline.
To verify that the printer is not paused or offline
a.
74
Depending on your operating system, do one of the following:
●
Windows 8.1 and Windows 8: Point to or tap the upper-right corner of the screen to
open the Charms bar, click the Settings icon, click or tap Control Panel, and then click
or tap View devices and printers.
●
Windows 7: From the Windows Start menu, click Devices and Printers.
●
Windows Vista: From the Windows Start menu, click Control Panel, and then click
Printers.
●
Windows XP: From the Windows Start menu, click Control Panel, and then click
Printers and Faxes.
b.
Either double-click the icon for your printer or right-click the icon for your printer and select
See what’s printing to open the print queue.
c.
On the Printer menu, make sure there are no check marks next to Pause Printing or Use
Printer Offline.
d.
If you made any changes, try to print again.
Chapter 8 Solve a problem
ENWW
4.
Verify that the printer is set as the default printer.
To verify that the printer is set as the default printer
a.
b.
Depending upon your operating system, do one of the following:
●
Windows 8.1 and Windows 8: Point to or tap the upper-right corner of the screen to
open the Charms bar, click the Settings icon, click or tap Control Panel, and then click
or tap View devices and printers.
●
Windows 7: From the Windows Start menu, click Devices and Printers.
●
Windows Vista: From the Windows Start menu, click Control Panel, and then click
Printers.
●
Windows XP: From the Windows Start menu, click Control Panel, and then click
Printers and Faxes.
Make sure the correct printer is set as the default printer.
The default printer has a check mark in a black or green circle next to it.
5.
c.
If the wrong printer is set as the default printer, right-click the correct printer and select Set
as Default Printer.
d.
Try using your printer again.
Restart the print spooler.
To restart the print spooler
a.
Depending upon your operating system, do one of the following:
Windows 8.1 and Windows 8
i.
Point to or tap the upper-right corner of the screen to open the Charms bar, and then
click the Settings icon.
ii.
Click or tap Control Panel, and then click or tap System and Security.
iii.
Click or tap Administrative Tools, and then double-click or double-tap Services.
iv.
Right-click or touch and hold Print Spooler, and then click Properties.
v.
On the General tab, next to Startup type, make sure that Automatic is selected.
vi.
If the service is not already running, under Service status, click or tap Start, and then
click or tap OK.
Windows 7
ENWW
i.
From the Windows Start menu, click Control Panel, System and Security, and then
Administrative Tools.
ii.
Double-click Services.
iii.
Right-click the Print Spooler, and then click Properties.
Printing issues
75
iv.
On the General tab, next to Startup type, make sure that Automatic is selected.
v.
If the service is not already running, under Service status, click Start, and then click
OK.
Windows Vista
i.
From the Windows Start menu, click Control Panel, System and Maintenance,
Administrative Tools.
ii.
Double-click Services.
iii.
Right-click the Print Spooler service, and then click Properties.
iv.
On the General tab, next to Startup type, make sure that Automatic is selected.
v.
If the service is not already running, under Service status, click Start, and then click
OK.
Windows XP
b.
i.
From the Windows Start menu, right click My Computer.
ii.
Click Manage, and then click Services and Applications.
iii.
Double-click Services, and then select Print Spooler.
iv.
Right-click Print Spooler, and click Restart to restart the service.
Make sure the correct printer is set as the default printer.
The default printer has a check mark in a black or green circle next to it.
c.
If the wrong printer is set as the default printer, right-click the correct printer and select Set
as Default Printer.
d.
Try using your printer again.
6.
Restart the computer.
7.
Clear the print queue.
To clear the print queue
a.
b.
76
Depending upon your operating system, do one of the following:
●
Windows 8.1 and Windows 8: Point to or tap the upper-right corner of the screen to
open the Charms bar, click the Settings icon, click or tap Control Panel, and then click
or tap View devices and printers.
●
Windows 7: From the Windows Start menu, click Devices and Printers.
●
Windows Vista: From the Windows Start menu, click Control Panel, and then click
Printers.
●
Windows XP: From the Windows Start menu, click Control Panel, and then click
Printers and Faxes.
Double-click the icon for your printer to open the print queue.
Chapter 8 Solve a problem
ENWW
c.
On the Printer menu, click Cancel all documents or Purge Print Document, and then click
Yes to confirm.
d.
If there are still documents in the queue, restart the computer and try printing again after
the computer has restarted.
e.
Check the print queue again to make sure it is clear, and then try to print again.
To check the power connection and reset the printer
1.
Make sure the power cord is firmly connected to the printer.
1
Power connection to the printer
2
Connection to a power outlet
2.
Look inside the printer and check for a green light indicating the printer is receiving electrical
power. If it is not lit, make sure the cord is fully plugged into the printer, or connect to another
power outlet.
3.
Look at the On button located on the printer. If it is not lit, the printer is turned off. Press the On
button to turn on the printer.
NOTE: If the printer is not receiving electrical power, connect it to another power outlet.
4.
With the printer turned on, disconnect the power cord from the side of the printer under the
cartridge access door.
5.
Unplug the power cord from the wall outlet.
6.
Wait at least 15 seconds.
7.
Plug the power cord back into the wall outlet.
8.
Reconnect the power cord to the side of the printer under the cartridge access door.
9.
If the printer does not turn on by itself, press the On button to turn on the printer.
10. Try using the printer again.
Fix print quality issues
Step-by-step instructions for resolving most print quality issues.
ENWW
Troubleshoot print quality issues online
Printing issues
77
Read general instructions in the Help for resolving print quality issues
NOTE: To avoid print quality problems, always turn the printer off using the On button, and wait until
the On button light goes out before you pull the plug or turn off a power strip. This allows the printer to
move the cartridges to a capped position, where they are protected from drying out.
To improve print quality
1.
Make sure you are using original HP ink cartridges.
2.
Check the printer software to make sure you have selected the appropriate paper type from the
Media drop-down list and print quality from the Quality Settings drop-down list.
●
In the printer software, click Print & Scan and then click Set Preferences to access the print
properties.
3.
Check the estimated ink levels to determine if the cartridges are low on ink. For more
information, see Check the estimated ink levels on page 48. If the ink cartridges are low on ink
consider replacing them.
4.
Align the cartridges.
To align the cartridges from the printer software
NOTE: Aligning the cartridges ensures the high-quality output. The HP All-in-One prompts you
to align the cartridges every time you install a new cartridge. If you remove and reinstall the
same ink cartridge, the HP All-in-One will not prompt you to align the ink cartridges. The HP Allin-One remembers the alignment values for that ink cartridge, so you do not need to realign the
ink cartridges.
78
a.
Load letter or A4 unused plain white paper into the paper tray.
b.
Depending on your operating system, do one of the following to open the printer software:
c.
In the printer software, click Print & Scan, and then click Maintain Your Printer to access the
Printer Toolbox.
d.
In Printer Toolbox, click Align Ink Cartridges on the Device Services tab. The printer prints
an alignment sheet.
e.
Load the cartridge alignment sheet print side down on the right front corner of the scanner
glass.
f.
Follow the instructions on the printer display to align the cartridges. Recycle or discard the
cartridge alignment sheet.
Chapter 8 Solve a problem
ENWW
To align the cartridges from the printer display
5.
a.
Load Letter or A4 unused plain white paper into the input tray.
b.
From the printer control panel display, touch Setup.
c.
Touch Printer Maintenance, select Align Printhead, and then follow the on-screen
instructions.
Print a diagnostics page if the cartridges are not low on ink.
To print a diagnostics page from the printer software
a.
Load letter or A4 unused plain white paper into the paper tray.
b.
Depending on your operating system, do one of the following to open the printer software:
c.
In the printer software, click Print & Scan, and then click Maintain Your Printer to access the
printer toolbox.
d.
Click Print Diagnostic Information on the Device Reports tab to print a diagnostics page.
Review the blue, magenta, yellow, and black boxes on the diagnostics page. If you are
seeing streaks in the color and black boxes, or no ink in portions of the boxes, then
automatically clean the cartridges.
To print a diagnostics page from the printer display
6.
a.
Load letter or A4 unused plain white paper into the paper tray.
b.
From the printer control panel, touch Setup.
c.
Touch Reports.
d.
Touch Print Quality Report.
Clean the ink cartridges automatically, if the diagnostic page shows steaks or missing portions of
the color and black boxes.
To clean the cartridges from the printer software
ENWW
a.
Load letter or A4 unused plain white paper into the paper tray.
b.
Depending on your operating system, do one of the following to open the printer software:
●
Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then
select the printer name.
●
Windows 8: Right-click an empty area on the Start screen, click All Apps on the app
bar, and then select the printer name.
●
Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start,
select All Programs, click HP, click the folder for the printer, and then select the icon
with the printer's name.
c.
In the printer software, click Print & Scan and then click Maintain Your Printer to access the
Printer Toolbox.
d.
Click Clean Ink Cartridges on the Device Services tab. Follow the on-screen instructions.
Printing issues
79
To clean the cartridges from the printer display
a.
Load Letter or A4 unused plain white paper into the input tray.
b.
From the printer control panel display, touch Setup.
c.
Touch Printer Maintenance, select Clean Printhead, and then follow the on-screen
instructions.
If cleaning the printhead does not solve the problem, contact HP support. Go to www.hp.com/
support. This website provides information and utilities that can help you correct many common
printer problems. If prompted, select your country/region, and then click All HP Contacts for
information on calling for technical support.
To improve print quality
1.
Make sure you are using original HP cartridges.
2.
Make sure you have selected the appropriate paper type and print quality in the Print dialog.
3.
Check the estimated ink levels to determine if the cartridges are low on ink.
Consider replacing the print cartridges if they are low on ink.
4.
Align the printer cartridges
To align print cartridges from the software
a.
Load Letter or A4 plain, white paper in the paper tray.
b.
Open HP Utility.
NOTE: HP Utility is located in the Hewlett-Packard folder in the Applications folder at the
top level of the hard disk.
5.
c.
Select the HP ENVY 5660 series from the list of devices at the left of the window.
d.
Click Align.
e.
Click Align and follow the on-screen instructions.
f.
Click All Settings to return to the Information and Support pane.
Print a test page.
To print a test page
a.
Load Letter or A4 plain, white paper in the paper tray.
b.
Open HP Utility.
NOTE: HP Utility is located in the Hewlett-Packard folder in the Applications folder at the
top level of the hard disk.
c.
80
Select the HP ENVY 5660 series from the list of devices at the left of the window.
Chapter 8 Solve a problem
ENWW
d.
Click Test Page.
e.
Click the Print Test Page button, and follow the on-screen instructions.
Check the test page for jagged lines in the text or streaks in the text and colored boxes. If
you are seeing jagged lines, or streaks, or no ink in portions of the boxes, then
automatically clean the cartridges.
6.
If the diagnostic page shows steaks or missing portions of the text or colored boxes, clean the
print cartridges automatically.
To automatically clean the print head
a.
Load Letter or A4 plain, white paper in the paper tray.
b.
Open HP Utility.
NOTE: HP Utility is located in the Hewlett-Packard folder in the Applications folder at the
top level of the hard disk.
c.
Select the HP ENVY 5660 series from the list of devices at the left of the window.
d.
Click Clean Printheads.
e.
Click Clean, and follow the on-screen instructions.
CAUTION: Clean the print head only when necessary. Unnecessary cleaning wastes ink
and shortens the life of the print head.
NOTE: If print quality still seems poor after you complete cleaning, try aligning the printer.
If print quality problems persist after cleaning and aligning, contact HP support.
f.
Click All Settings to return to the Information and Support pane.
Fix ink smears on printouts
If a printout shows smears of ink, for subsequent prints, try using the Clean Ink Smear function from
the printer display. This process takes several minutes to complete. Full-size plain paper needs to be
loaded and will be moved back and forth during the cleaning. Mechanical noises are normal at this
time.
1.
Load Letter or A4 unused plain white paper into the input tray.
2.
From the printer control panel display, touch Setup.
3.
Touch Printer Maintenance, select the desired option, and then follow the on-screen instructions.
NOTE: You can also do the same from the HP printer software or embedded web server (EWS). To
access the software or EWS, see Open the HP printer software (Windows) on page 16 or Open the
embedded Web server on page 64.
ENWW
Printing issues
81
Copy issues
Troubleshoot copy
problems.
NOTE:
Use an HP online troubleshooting wizard
Get step-by-step instructions if the printer does not create a copy, or if your printouts are low
quality.
The HP online troubleshooting wizards may not be available in all languages.
Tips for copy and scan success on page 46
82
Chapter 8 Solve a problem
ENWW
Scan issues
HP Print and Scan Doctor
The HP Print and Scan Doctor is a utility that will try to diagnose and fix the issue automatically.
Solve scan problems
Use an HP online troubleshooting wizard
Get step-by-step instructions if you cannot create a scan or if your scans are low quality.
NOTE: The HP Print and Scan Doctor and the HP online troubleshooting wizards may not be
available in all languages.
Tips for copy and scan success on page 46
ENWW
Scan issues
83
Network and connection issues
What do you want to do?
Fix wireless connection
Choose one of the following troubleshooting options.
HP Print and Scan Doctor
The HP Print and Scan Doctor is a utility that will try to diagnose and fix the issue automatically.
Use an HP online
troubleshooting wizard
Troubleshoot a firewall or antivirus issue, if you suspect that it is preventing your computer from
connecting to the printer.
●
Troubleshoot your wireless problem, whether your printer has never been connected or it
was connected and is no longer working.
●
Troubleshoot a firewall or antivirus issue, if you suspect that it is preventing your computer
from connecting to the printer.
NOTE: The HP Print and Scan Doctor and the HP online troubleshooting wizards may not be
available in all languages.
Read general instructions in the Help for wireless troubleshooting
Check the network configuration or print the wireless test report to assist in diagnosing network
connection issues.
1.
From the Home screen, touch
2.
Touch Print Reports. and then touch Display Network Configuration or Print Wireless Test
Report.
(Wireless) and then touch
(Settings).
Find network settings for wireless connection
Choose one of the following troubleshooting options.
HP Print and Scan Doctor
The HP Print and Scan Doctor is a utility that can tell you the network name
(SSID) and password (network key).
Use an HP online troubleshooting
wizard
Learn how to find your network name (SSID) and wireless password.
NOTE: The HP Print and Scan Doctor and the HP online troubleshooting wizards may not be
available in all languages.
Fix Wi-Fi Direct connection
Use an HP online troubleshooting wizard
NOTE:
84
Troubleshoot your Wi-Fi Direct problem or learn how to configure Wi-Fi Direct.
The HP online troubleshooting wizards may not be available in all languages.
Chapter 8 Solve a problem
ENWW
Read general instructions in the Help for Wi-Fi Direct troubleshooting
1.
Check the printer to confirm that Wi-Fi Direct is turned on:
▲
From the printer control panel, touch
(Wi-Fi Direct).
2.
From your wireless computer or mobile device, turn on the Wi-Fi connection, and then search for
and connect to the Wi-Fi Direct name of your printer.
3.
Enter the Wi-Fi Direct password when prompted.
4.
If you are using a mobile device, make sure you have installed a compatible printing app. For
more information about mobile printing, visit www.hp.com/global/us/en/eprint/
mobile_printing_apps.html.
Convert USB connection to wireless
Choose one of the following troubleshooting options.
HP Print and Scan Doctor
The HP Print and Scan Doctor is a utility that will try to diagnose and fix the issue
automatically.
Use an HP online troubleshooting wizard
Convert a USB connection to wireless or Wi-Fi Direct.
NOTE: The HP Print and Scan Doctor and the HP online troubleshooting wizards may not be
available in all languages.
Change the connection type on page 58
ENWW
Network and connection issues
85
Printer hardware issues
TIP: Run the HP Print and Scan Doctor to diagnose and automatically fix printing, scanning, and
copying issues. The application is only available in some languages.
To extract the automatic output tray extender manually
If the automatic output tray extender does not deploy automatically, you can extract it manually.
1.
Remove the output tray from the printer.
2.
On the bottom of the output tray, move the output tray lock to the unlocked position, and then
shift the release lever to release the tray extender.
3.
Insert the output tray back into the printer leaving the tray extender in the released position.
The printer shuts down unexpectedly
●
Check the power and power connections.
●
Make sure the printer's power cord is connected firmly to a functioning power outlet.
Printhead alignment fails
86
●
If the alignment process fails, make sure you have loaded unused, plain white paper into the
input tray. If you have colored paper loaded in the input tray when you align the ink cartridges,
the alignment fails.
●
If the alignment process fails repeatedly, you may need to clean the printhead, or you might
have a defective sensor.
●
If cleaning the printhead does not solve the problem, contact HP support. Go to www.hp.com/
support. This website provides information and utilities that can help you correct many common
printer problems. If prompted, select your country/region, and then click All HP Contacts for
information on calling for technical support.
Chapter 8 Solve a problem
ENWW
Resolve printer failure.
▲
Turn the printer off, then on. If that does not resolve the problem, contact HP.
For more information about contacting HP support, see HP support on page 88.
ENWW
Printer hardware issues
87
HP support
●
Register printer
●
Support process
●
HP support by phone
●
Additional warranty options
Register printer
By taking just a few quick minutes to register, you can enjoy quicker service, more efficient support,
and product support alerts. If you did not register your printer while installing the software, you can
register now at http://www.register.hp.com.
Support process
If you have a problem, follow these steps:
1.
Check the documentation that came with the printer.
2.
Visit the HP online support website at www.hp.com/support.
HP online support is available to all HP customers. It is the fastest source for up-to-date product
information and expert assistance, and includes the following features:
3.
●
Fast access to qualified online support specialists
●
Software and driver updates for the printer
●
Valuable troubleshooting information for common problems
●
Proactive printer updates, support alerts, and HP newsgrams that are available when you
register the printer
Call HP support.
Support options and availability vary by printer, country/region, and language.
HP support by phone
Phone support options and availability vary by product, country/region, and language.
This section contains the following topics:
88
●
Phone support period
●
Placing a call
●
Support phone numbers
●
After the phone support period
Chapter 8 Solve a problem
ENWW
Phone support period
One year of phone support is available in North America, Asia Pacific, and Latin America (including
Mexico). To determine the duration of phone support in Europe, the Middle East, and Africa, go to
www.hp.com/support. Standard phone company charges apply.
Placing a call
Call HP support while you are in front of the computer and the printer. Be prepared to provide the
following information:
●
Product name (Located on the printer, such as HP ENVY 5660)
●
Product number (located inside the cartridge access door)
●
Serial number (located on the back or bottom of the printer)
●
Messages that appear when the situation occurs
●
Answers to these questions:
◦
Has this situation happened before?
◦
Can you recreate it?
◦
Did you add any new hardware or software to your computer at about the time that this
situation began?
◦
Did anything else occur prior to this situation (such as a thunderstorm, the printer was
moved, etc.)?
Support phone numbers
For the most current HP list of telephone support numbers and call costs information, see
www.hp.com/support.
After the phone support period
After the phone support period, help is available from HP at an additional cost. Help may also be
available at the HP online support website: www.hp.com/support. Contact your HP dealer or call the
support phone number for your country/region to learn more about support options.
Additional warranty options
Extended service plans are available for the HP ENVY 5660 series at additional costs. Go to
www.hp.com/support, select your country/region and language, then explore the services and
warranty area for information about the extended service plans.
ENWW
HP support
89
A
Technical information
The technical specifications and international regulatory information for the HP ENVY 5660 series are
provided in this section.
For additional specifications, see the printed documentation that came with the HP ENVY 5660
series.
This section contains the following topics:
90
●
Hewlett-Packard Company notices
●
Specifications
●
Environmental product stewardship program
●
Regulatory information
Appendix A Technical information
ENWW
Hewlett-Packard Company notices
The information contained herein is subject to change without notice.
All rights reserved. Reproduction, adaptation, or translation of this material is prohibited without prior
written permission of Hewlett-Packard, except as allowed under the copyright laws. The only
warranties for HP products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial errors or omissions contained
herein.
© 2014 Hewlett-Packard Development Company, L.P.
Microsoft®, Windows ®, Windows® XP, Windows Vista®, Windows® 7, Windows® 8, and Windows®
8.1 are U.S. registered trademarks of Microsoft Corporation.
ENWW
Hewlett-Packard Company notices
91
Specifications
Technical specifications for the HP ENVY 5660 series are provided in this section. For more product
specifications, see the Product Data Sheet at www.hp.com/support.
System requirements
Software and system requirements are located in the Readme file.
For information about future operating system releases and support, visit the HP online support
website at www.hp.com/support.
Environmental specifications
●
Recommended operating temperature range: 15ºC to 32ºC (59ºF to 90ºF)
●
Allowable operating temperature range: 5ºC to 40ºC (41ºF to 104ºF)
●
Humidity: 20% to 80% RH non-condensing (recommended); 25ºC maximum dewpoint
●
Non-operating (Storage) temperature range: –40ºC to 60ºC (-40ºF to 140ºF)
●
In the presence of high electromagnetic fields, it is possible the output from the HP ENVY 5660
series may be slightly distorted.
●
HP recommends using a USB cable less than or equal to 3 m (10 feet) in length to minimize
injected noise due to potential high electromagnetic fields.
Print specifications
●
Print speeds vary according to the complexity of the document.
●
Method: drop-on-demand thermal inkjet
●
Language: PCL3 GUI
Scan specifications
92
●
Optical Resolution: up to 1200 dpi
●
Hardware Resolution: up to 1200 x 1200 dpi
●
Enhanced Resolution: up to 1200 x 1200 dpi
●
Bitdepth: 24-bit color, 8-bit grayscale (256 levels of gray)
●
Maximum scan size from glass: 21.6 x 29.7 cm (8.5 x 11.7 inches)
●
Supported File Types: BMP, JPEG, PNG, TIFF, PDF
●
Twain Version: 1.9
Appendix A Technical information
ENWW
Copy specifications
●
Digital image processing
●
Maximum number of copies varies by model.
●
Copy speeds vary according to the complexity of the document and model.
Cartridge yield
Visit www.hp.com/go/learnaboutsupplies for more information on estimated cartridge yields.
Print resolution
Table A-1 Print resolution
Draft mode
Normal mode
Plain-Best mode
Photo-Best mode
Max DPI mode
ENWW
●
Color Input/Black Render: 300x300dpi
●
Output (Black/Color): Automatic
●
Color Input/Black Render: 600x600dpi
●
Output (Black/Color): Automatic
●
Color Input/Black Render: 600x600dpi
●
Output (Black/Color): Automatic
●
Color Input/Black Render: 600x600dpi
●
Output (Black/Color): Automatic
●
Color Input/Black Render: 1200x1200dpi
●
Output: Automatic (Black/Color), 4800x1200 optimized dpi (Photo Paper, Color)
Specifications
93
Environmental product stewardship program
Hewlett-Packard is committed to providing quality products in an environmentally sound manner.
Design for recycling has been incorporated into this product. The number of materials has been kept
to a minimum while ensuring proper functionality and reliability. Dissimilar materials have been
designed to separate easily. Fasteners and other connections are easy to locate, access, and remove
using common tools. High priority parts are designed for efficient disassembly and repair.
For more information, visit HP’s Commitment to the Environment website at:
www.hp.com/hpinfo/globalcitizenship/environment/index.html.
This section contains the following topics:
●
Eco-Tips
●
Paper use
●
Plastics
●
Material safety data sheets
●
HP inkjet supplies recycling program
●
Power consumption
●
Disposal of waste equipment by users
●
Chemical substances
●
Battery disposal in the Taiwan
●
Battery notice for Brazil
●
California Perchlorate Material Notice
●
EPEAT
●
Toxic and hazardous substance table (China)
●
Restriction of hazardous substance (Ukraine)
●
Restriction of hazardous substance (India)
Eco-Tips
HP is committed to helping customers reduce their environmental footprint. Please visit the HP
Environmental Programs and Initiatives website for more information on HP’s environmental
initiatives.
www.hp.com/hpinfo/globalcitizenship/environment/
Paper use
This product is suited for the use of recycled paper according to DIN 19309 and EN 12281:2002.
94
Appendix A Technical information
ENWW
Plastics
Plastic parts over 25 grams are marked according to international standards that enhance the ability
to identify plastics for recycling purposes at the end of product life.
Material safety data sheets
Material safety data sheets (MSDS) can be obtained from the HP website at:
www.hp.com/go/msds
HP inkjet supplies recycling program
HP is committed to protecting the environment. The HP Inkjet Supplies Recycling Program is
available in many countries/regions, and lets you recycle used print cartridges and ink cartridges free
of charge. For more information, go to the following website:
www.hp.com/hpinfo/globalcitizenship/environment/recycle/
Power consumption
Hewlett-Packard printing and imaging equipment marked with the ENERGY STAR® logo is qualified
to the U.S. Environmental Protection Agency’s ENERGY STAR specifications for imaging equipment.
The following mark will appear on ENERGY STAR qualified imaging products:
Additional ENERGY STAR qualified imaging product model information is listed at: www.hp.com/go/
energystar
Disposal of waste equipment by users
This symbol means do not dispose of your product with your other household waste.
Instead, you should protect human health and the environment by handing over your
waste equipment to a designated collection point for the recycling of waste electrical
and electronic equipment. For more information, please contact your household waste
disposal service, or go to http://www.hp.com/recycle.
Chemical substances
HP is committed to providing our customers with information about the chemical substances in our
products as needed to comply with legal requirements such as REACH (Regulation EC No
1907/2006 of the European Parliament and the Council). A chemical information report for this
product can be found at: www.hp.com/go/reach.
ENWW
Environmental product stewardship program
95
Battery disposal in the Taiwan
Battery notice for Brazil
California Perchlorate Material Notice
EPEAT
96
Appendix A Technical information
ENWW
Toxic and hazardous substance table (China)
Restriction of hazardous substance (Ukraine)
Restriction of hazardous substance (India)
ENWW
Environmental product stewardship program
97
Regulatory information
The printer meets product requirements from regulatory agencies in your country/region.
This section contains the following topics:
●
Regulatory model identification number
●
FCC statement
●
Notice to users in Korea
●
VCCI (Class B) compliance statement for users in Japan
●
Notice to users in Japan about the power cord
●
GS Statement (Germany)
●
Declaration of conformity
●
Regulatory information for wireless products
Regulatory model identification number
For regulatory identification purposes, your product is assigned a Regulatory Model Number. The
Regulatory Model Number for your product is SDGOB-1401-01. This regulatory number should not be
confused with the marketing name (HP ENVY 5660 e-All-in-One series, etc.) or product numbers
(F8B04A, F8B06A, etc.).
98
Appendix A Technical information
ENWW
FCC statement
Notice to users in Korea
VCCI (Class B) compliance statement for users in Japan
Notice to users in Japan about the power cord
ENWW
Regulatory information
99
GS Statement (Germany)
100 Appendix A Technical information
ENWW
Declaration of conformity
ENWW
Regulatory information 101
Regulatory information for wireless products
This section contains the following regulatory information pertaining to wireless products:
●
Exposure to radio frequency radiation
●
Notice to users in Brazil
●
Notice to users in Canada
●
Notice to users in Taiwan
●
Notice to users in Mexico
●
Wireless notice to users in Japan
Exposure to radio frequency radiation
Notice to users in Brazil
102 Appendix A Technical information
ENWW
Notice to users in Canada
Notice to users in Taiwan
ENWW
Regulatory information 103
Notice to users in Mexico
Wireless notice to users in Japan
104 Appendix A Technical information
ENWW
B
ENWW
Errors (Windows)
●
Low on ink
●
Very low on ink
●
Ink cartridge problem
●
Check cartridge access door
●
Ink cartridge problem
●
Paper size mismatch
●
Ink cartridge carriage stalled
●
Paper jam or tray problem
●
Out of paper
●
Document failed to print
●
Printer failure
●
Door open
●
Ink cartridge failure
●
Counterfeit Cartridge Advisory
●
Incompatible ink cartridges
●
Paper too short
●
Paper too long to auto-duplex
●
Incompatible HP Instant Ink Cartridge
●
Used HP Instant Ink Cartridge
●
Please Connect Printer to HP Connected
●
Cannot Print
●
HP Protected Cartridge Installed
105
Low on ink
The ink cartridge identified in the message is low on ink.
Ink level warnings and indicators provide estimates for planning purposes only. When you receive
a low ink warning message, consider having a replacement cartridge available to avoid possible
printing delays. You do not need to replace cartridges until the print quality becomes unacceptable.
For information about replacing ink cartridges, see Replace the cartridges on page 49. For
information about ordering ink cartridges, see Order ink supplies on page 51.
NOTE: Ink from the cartridges is used in the printing process in a number of different ways,
including in the initialization process, which prepares the printer and cartridges for printing. In
addition, some residual ink is left in the cartridge after it is used. For more information see
www.hp.com/go/inkusage.
106 Appendix B Errors (Windows)
ENWW
Very low on ink
The ink cartridge identified in the message is very low on ink.
Ink level warnings and indicators provide estimates for planning purposes only. When you receive
a very low ink warning message, HP recommends having a replacement cartridge available to avoid
possible printing delays. You do not need to replace cartridges until the print quality is unacceptable.
For information about replacing ink cartridges, see Replace the cartridges on page 49. For
information about ordering ink cartridges, see Order ink supplies on page 51.
NOTE: Ink from the cartridges is used in the printing process in a number of different ways,
including in the initialization process, which prepares the printer and cartridges for printing. In
addition, some residual ink is left in the cartridge after it is used. For more information see
www.hp.com/go/inkusage.
ENWW
Very low on ink 107
Ink cartridge problem
The ink cartridge identified in the message is missing, damaged, incompatible, or inserted into the
wrong slot in the printer.
NOTE: If the cartridge is identified in the message as incompatible, see Order ink supplies
on page 51 for information about obtaining cartridges for the printer.
To solve this problem, try the following solutions. Solutions are listed in order, with the most likely
solution first. If the first solution does not solve the problem, continue trying the remaining solutions
until the issue is resolved.
●
Solution 1: Turn the printer off and on.
●
Solution 2: Install the ink cartridges correctly.
Solution 1: Turn the printer off and on
Turn off the printer, and then turn it on again.
If the problem persists, try the next solution.
Solution 2: Install the ink cartridges correctly
Make sure all of the ink cartridges are properly installed:
1.
Gently pull open the ink cartridge access door.
2.
Remove the ink cartridge by pushing it in to release it, and then pulling it firmly toward you.
3.
Insert the cartridge into the slot. Press firmly on the cartridge to ensure proper contact.
4.
Close the ink cartridge access door and check if the error message has gone away.
108 Appendix B Errors (Windows)
ENWW
Check cartridge access door
The cartridge access door should be closed for printing.
Click here to go online for more information.
ENWW
Check cartridge access door 109
Ink cartridge problem
The ink cartridge is not compatible with your printer. This error can occur if you install an HP Instant
Ink cartridge into a printer that has not been enrolled in the HP Instant Ink program. It can also occur
if the HP Instant Ink cartridge was previously used in a different printer enrolled in the HP Instant Ink
program.
110 Appendix B Errors (Windows)
ENWW
Paper size mismatch
The paper size or type selected in the printer driver does not match the paper loaded in the printer.
Make sure that the correct paper is loaded in the printer, and then print the document again. For more
information, see Load media on page 11.
NOTE: If the paper loaded in the printer is the correct size, change the selected paper size in the
printer driver, and then print the document again.
ENWW
Paper size mismatch 111
Ink cartridge carriage stalled
Something is blocking the ink cartridge carriage (the part of the printer that holds the ink cartridges).
To clear the obstruction check the printer for jams.
For more information, see Jams and paper-feed issues on page 67.
112 Appendix B Errors (Windows)
ENWW
Paper jam or tray problem
Paper has become jammed in the printer.
Before you try to clear the jam, check the following:
●
Make sure that you have loaded paper that meets specifications and is not wrinkled, folded, or
damaged. For more information, see Paper basics on page 8.
●
Make sure that the printer is clean.
●
Make sure that the trays are loaded correctly and are not too full. For more information, see
Load media on page 11.
For instructions on clearing jams, as well as more information about how to avoid jams, see Jams and
paper-feed issues on page 67.
ENWW
Paper jam or tray problem 113
Out of paper
The default tray is empty.
Load more paper, and then touch OK.
For more information, see Load media on page 11.
114 Appendix B Errors (Windows)
ENWW
Document failed to print
The printer could not print the document because a problem occurred in the printing system.
For information about solving printing problems, see Printer hardware issues on page 86.
ENWW
Document failed to print 115
Printer failure
There was a problem with the printer or ink system. Usually, you can resolve such problems by
completing the following steps:
1.
Press
2.
Unplug the power cord, and then plug in the power cord again.
3.
Press
(the Power button) to turn off the printer.
(the Power button) to turn on the printer.
If this problem persists, write down the error code provided in the message, and then contact HP
support. For more information about contacting HP support, see HP support on page 88.
116 Appendix B Errors (Windows)
ENWW
Door open
Before the printer can print documents, all doors and covers must be closed.
TIP: When completely closed, most doors and covers snap into place.
If the problem persists after you’ve securely closed all doors and covers, contact HP support. For
more information, see HP support on page 88.
ENWW
Door open 117
Ink cartridge failure
The cartridges listed in the message are damaged or have failed.
See Replace the cartridges on page 49.
118 Appendix B Errors (Windows)
ENWW
Counterfeit Cartridge Advisory
The installed cartridge is not a new, genuine HP cartridge. Contact the store where this cartridge was
purchased. To report suspected fraud, visit HP at www.hp.com/go/anticounterfeit. To continue using
the cartridge, click Continue.
ENWW
Counterfeit Cartridge Advisory 119
Incompatible ink cartridges
The ink cartridge is not compatible with your printer.
Solution: Remove this cartridge immediately and replace with a compatible ink cartridge. For
information about how to install new cartridges, see Replace the cartridges on page 49.
120 Appendix B Errors (Windows)
ENWW
Paper too short
The paper loaded is shorter than the minimum requirement. Paper that meets the printer
requirements must be loaded. For more information, see Paper basics on page 8 and Load media
on page 11.
ENWW
Paper too short 121
Paper too long to auto-duplex
The paper loaded is longer than supported by the printer automatic duplexing. You can manually
duplex it by selecting "manual duplex" or "print odd pages" and "print even pages" in your printer
software (if supported). For more information, see Paper basics on page 8 and Load media
on page 11.
122 Appendix B Errors (Windows)
ENWW
Incompatible HP Instant Ink Cartridge
This cartridge can only be used in a printer that is currently enrolled in HP Instant Ink.
If you believe your printer should accept this cartridge, please contact www.hp.com/buy/supplies.
ENWW
Incompatible HP Instant Ink Cartridge 123
Used HP Instant Ink Cartridge
The HP Instant Ink cartridge(s) listed on the printer control panel display can only be used in the HP
Instant Ink printer that initially installed the cartridge. The cartridge must be replaced.
For information about replacing ink cartridges, see Replace the cartridges on page 49. For
information about ordering ink cartridges, see Order ink supplies on page 51.
124 Appendix B Errors (Windows)
ENWW
Please Connect Printer to HP Connected
The printer must be connected to HP Connected, otherwise you will be unable to print soon without
further warning. See the printer control panel for instructions on connecting.
ENWW
Please Connect Printer to HP Connected 125
Cannot Print
The printer needs to be connected to HP Connected to update its Instant Ink status.
You will be unable to print until the printer has been connected to update the Instant Ink status. See
the printer control panel for instructions on connecting.
126 Appendix B Errors (Windows)
ENWW
HP Protected Cartridge Installed
The ink cartridge listed on the printer control panel can only be used in the printer that initially
protected the cartridge using the HP Cartridge Protection feature. The ink cartridge must be replaced
in this printer.
For information about how to install a new ink cartridge, see Replace the cartridges on page 49.
ENWW
HP Protected Cartridge Installed 127
Index
A
accessibility 19
after the support period
89
B
both sides, print on 24
buttons, control panel 5
C
carriage
clear carriage jams 69
connectors, locating 4
control panel
buttons 5
features 5
lights 5
status icons 6
copy
specifications 93
customer support
warranty 89
D
double-sided printing 24
E
embedded web server
Webscan 44
environment
Environmental product
stewardship program 94
environmental specifications
92
G
glass, scanner
locating 3
H
Help button 6
128 Index
HP Utility (OS X)
opening 63
I
ink cartridges 4
IP settings 62
J
jams
clear 67
paper to avoid
L
lights, control panel
10
5
M
media
duplexing 24
multi-feeds, troubleshoot 71
N
networks
connector illustration 4
IP settings 62
settings, change 62
wireless communication
setup 57
O
OS X
HP Utility 63
output tray
locating 3
P
paper
clear jams 67
HP, order 10
selecting 10
skewed pages 71
troubleshoot feeding 70
paper-feed problems,
troubleshoot 70
phone support 88
phone support period
period for support 89
power
troubleshoot 86
power input, locating 4
print
double-sided 24
specifications 92
troubleshoot 86
printer control panel
locating 3
network settings 62
printer software (Windows)
about 63
opening 16, 63
R
radio interference
regulatory information 102
rear access panel
illustration 4
recycle
ink cartridges 95
regulatory information 98, 102
regulatory notices
regulatory model identification
number 98
S
scan
from Webscan 44
scan specifications 92
scanner glass
locating 3
ENWW
settings
network 62
skew, troubleshoot
print 71
software
Webscan 44
status icons 6
support process 88
system requirements 92
T
technical information
copy specifications 93
environmental specifications
92
print specifications 92
scan specifications 92
system requirements 92
trays
clear paper jams 67
locating 3
paper-width guides
illustration 3
troubleshoot feeding 70
troubleshoot
multiple pages are picked 71
paper not picked up from tray
70
paper-feed problems 70
power 86
print 86
skewed pages 71
two-sided printing 24
U
USB connection
port, locating 3, 4
W
warranty 89
Webscan 44
websites
accessibility information 19
wireless communication
regulatory information 102
set up 57
ENWW
Index 129
Download PDF

advertising