HP DesignJet 800 A0+/E+, D/A1 Large Format Printer Uživatelská příručka

Introduction
Media & Ink
Using this Guide
Solutions
Front Panel
Introducing Your
HP DesignJet 800 Printer
Printer
Options
Front View of Printer
Other
Index
Printer Connections
Introduction
This User’s Reference guide explains how to use your D/A1 size or A0+/E+ size HP DesignJet 800 Printer.
The Introduction Tab contains these topics:
•
Using this Guide
Contains information on how to use this guide. There is an explanation of when you should use it and what each
of the navigation buttons do when you click on them.
•
Introducing Your HP DesignJet 800 Printer
Contains a brief overview of the printer. It contains information about the printer’s features and what is included
with the printer.
•
Front View of Printer
Contains a view of the front of the printer showing the location of the printer’s consumable items.
•
Printer Connections
Shows the all connections: power, parallel interface, USB and network interface.
Introduction
Media & Ink
Using this Guide
Solutions
Front Panel
Introducing Your
HP DesignJet 800 Printer
Printer
Options
Front View of Printer
Other
Index
Printer Connections
Using this Guide
These topics detail the contents of the User’s Reference Guide, provide information on associated publications and give
the source of any other related material concerning your printer.
•
How to Use this Guide
Explains how to use and navigate through the User’s Reference Guide
•
Related Information
The associated publications and information that are available for your printer.
Introduction
Media & Ink
Using this Guide
Solutions
Front Panel
Introducing Your
HP DesignJet 800 Printer
Printer
Options
Front View of Printer
Other
Index
Printer Connections
How to Use this Guide
This User’s Reference guide explains the details for using both the D/A1 size and A0+/E+ size HP DesignJet 800
Printers.
This guide is designed as a detailed reference guide to your printer. For more day-to-day guidance you can refer
to the Pocket Guide. This can be found in a slot at the right side of the printer.
The “Tabs”
There are seven “Tabs” at the top of this guide. Each tab contains information about the printer. The first page of
every tab will explain what information you can expect to find and where to obtain related information.
The Buttons
To navigate around the User’s Reference Guide use the buttons on each side of the screen. See User’s Reference
Guide Navigation.
Animation
In some cases there is an animation that shows you how to perform the procedure.
Click on this button to start the animation.
Related Topics
Introduction
Media & Ink
Using this Guide
Solutions
Front Panel
Introducing Your
HP DesignJet 800 Printer
Printer
Options
Front View of Printer
Other
Index
Printer Connections
Related Information
•
The Setup Poster
Step-by-step information on how to prepare your
printer for use (came with your printer).
•
The Pocket Guide
Information that you are most likely to need for
printer operation on a day–by–day basis, such as
loading paper or replacing ink supplies (came with
your printer and located in a slot on the right hand
side of the printer).
•
The Repacking Poster
Detailed instructions on how to repack you printer
its original packing
(available from www.hp.com/go/designjet).
•
Web Page
Also you can visit us on our web page: www.hp.com/go/designjet.
Pocket Guide location
Introduction
Media & Ink
Using this Guide
Solutions
Front Panel
Introducing Your
HP DesignJet 800 Printer
Printer
Options
Other
Front View of Printer
Index
Printer Connections
User’s Reference Guide Navigation
The buttons on each side of the screen allow you to rapidly navigate though this document.
Home
To return to the Welcome Screen of
the Using Your Printer CD-ROM, click
the Home button.
To exit this document and quit the
Acrobat Reader application, click the
Exit Button.
Exit
Back
To retrace your path within this
document, click the Back button.
To print pages of the document, click
the Print button.
Print
Previous Page
To go to the previous page, click the
Previous Page button.
To go to the next page, click the Next
Page button.
Next Page
Introduction
Media & Ink
Using this Guide
Solutions
Printer
Options
Front Panel
Introducing Your
HP DesignJet 800 Printer
Front View of Printer
Introducing Your HP DesignJet 800 Printer
•
Your Printer’s Main Features
A general overview of the major features of your printer.
•
HP Ink Supplies
A description of the HP Ink Supplies required for your printer.
•
Print Resolution
Specifications of the print resolution for your printer.
•
Media
A description of the different types of media available for your printer.
•
User Interface
A description of the printer’s User Interface.
•
Memory
Details of internal memory and memory options available with your printer.
•
Drivers
Details of the drivers delivered with your printer.
Other
Index
Printer Connections
Introduction
Media & Ink
Using this Guide
Solutions
Front Panel
Introducing Your
HP DesignJet 800 Printer
Printer
Options
Front View of Printer
Other
Index
Printer Connections
Your Printer’s Main Features
The HP DesignJet 800 printing system is specially designed for medium sized work-groups in Architecture,
Engineering and Construction (AEC), mechanical CAD design and Geographical Information Systems (GIS).
For the complete printing solution, HP also offers a wide range of media including HP Heavyweight Coated Paper
with fade-resistant photo-quality output and HP High-Gloss Photo Paper for high-quality long-lasting prints that
produce a professional look and feel. And with the HP Complementary Media Program, HP provides users with a
wide spectrum of choice and flexibility in their media selection.
The HP DesignJet 800 printer comes in two sizes: A0+/E+ size (42 inches/1066.8 mm) and D/A1 size
(24 inches/609.6 mm) models. Both models have roll-feed capabilities. The A0+/E+ size model also includes legs
and a media bin.
•
Ultimate Photo Image Quality and Excellent Line Quality: The HP DesignJet 800 printer delivers ultimate photo
quality for renders, maps and photographs, providing continuous tones and smooth transitions, using a true
resolution of 2400x1200-dpi with HP’s color layering technology, which layers multiple color ink drops on a
single drop, on glossy media. The HP DesignJet 800 also produces excellent line quality for detailed CAD
drawings due to the fact that each one-half inch/12.7mm printhead contains 304 nozzles, producing miniscule
18-picoliter black pigmented ink drops and four picoliter color dye-based drops, that are idea for engineering,
architectural and mapping applications. And for precise color and monochrome line drawings, the
HP DesignJet 800 printer, ink system and media print sharp fine lines, as thin as .002-inches and ensure
accuracy of 0.2 percent of the specified page length.
•
Connectivity: The HP DesignJet 800 printer comes with HP-GL/2 drivers for AutoCad® and Windows. In
addition, the printer includes USB and Parallel ports and a powerful HP JetDirect 10/100 Base-TX network
card. Using the network card, the data from the user’s computer is transferred to the
“virtual computer” within the HP DesignJet 800 printer and immediately frees the data
from the computer while processing it quickly.
More…
Introduction
Media & Ink
Using this Guide
Solutions
Front Panel
Introducing Your
HP DesignJet 800 Printer
Printer
Options
Front View of Printer
Other
Index
Printer Connections
•
Speed: The HP DesignJet 800 printer delivers speeds of 250ft2/hour and color CAD line drawings on bond
media are printed up to three times faster than its predecessor the, the HP DesignJet 700 series printers.
Because the printer contains a virtual computer and printing is continuous, data is received by the network
card and quickly processes and prints using embedded processors and large memory (96MB RAM and 6GB
hard disk) included within the printer.
•
HP Premium Printing Material: The HP DesignJet 800 A0+/E+ size and D/A1 size printing systems accept a
wide range of roll and sheet media from 24 inches/609.6 mm (D/A1 size) to 42 inches/1066.8 mm (A0+/E+ size)
wide including HP Satin Poster Paper, HP High-Gloss Photo Paper and HP Heavyweight Coated Paper. In
addition, the HP DesignJet 800 printer accepts a wide range of media for technical applications.
Complementary Media Program (CMP): The CMP helps HP customers grow their businesses by referencing thirdparty printing material choices to ensure maximum HP DesignJet printer flexibility and printing solutions.
•
Introduction
Media & Ink
Using this Guide
Solutions
Front Panel
Introducing Your
HP DesignJet 800 Printer
Printer
Options
Front View of Printer
Other
Index
Printer Connections
HP Ink Supplies
HP Ink Supplies for your printer contain two components: printheads and ink cartridges. Your HP DesignJet 800
printer uses the following HP Ink Supplies:
• Black Ink Cartridges are HP No 10 Supplies.
• Cyan, Magenta and Yellow Cartridges are HP No 82 Supplies.
• All Printheads are HP No 11 Supplies.
Each 600-dpi thermal inkjet printhead applies thousands of ink droplets onto the paper. The printer automatically refills
the printhead as it prints, enabling continuous uninterrupted printing. The ink is supplied to each printhead from a
separate large capacity ink cartridge.
There is more information available in a pamphlet which comes with the printheads and in Print Times for a Selected
Print Quality.
Introduction
Media & Ink
Using this Guide
Solutions
Printer
Options
Front Panel
Introducing Your
HP DesignJet 800 Printer
Other
Front View of Printer
Index
Printer Connections
Print Resolution
Your HP DesignJet 800 printer provides two different print modes that change the print resolutions of each of the print
quality modes. These different print modes are optimized for: Line Drawings/Text or Images.
You can then choose between three levels of print quality for each of the print modes: Best, Normal or Fast from your
software or from the printer's front panel.
With the best mode selected you have an additional selection available to provide maximum detail for your printed
image by increasing the resolution of your job above the default resolution.
Print Quality Setting
Optimized for Line Drawing/Text
Optimized for Images
Resolution in dpi
Resolution in dpi
Render
Halftone
Render
Halftone
Fast
300x300
600x300
150x150
600x300
Normal
600x600
600x600
300x300
600x600
Best (default)
600x600
600x600
600x600
600x600
Best (maximum detail)
600x600
1200x600
1200x1200
2400x1200a
a. Glossy Photo Media Only
Use Fast to get draft copies of your prints at maximum throughput. Normal is optimized so that you
get the best line quality with the fastest throughput. Select Best if you want to get the best quality
for images and renderings.
Introduction
Media & Ink
Using this Guide
Solutions
Printer
Options
Front Panel
Introducing Your
HP DesignJet 800 Printer
Other
Front View of Printer
Index
Printer Connections
Media
You can print on roll media or sheet media up to 42 inches (1066.8 mm) wide with the A0+/E+ size HP DesignJet 800
printer and up to 24 inches (609.6 mm) with the D/A1 size model.
The following media types are supported on the HP DesignJet 800printer:
•
HP Bright White Inkjet Paper (Bond)
•
HP Paper-Based Semi-Gloss
•
HP Vellum
•
HP Clear film
•
HP Natural Tracing Paper
•
HP Translucent bond
•
HP Coated Paper
•
HP Studio Canvas
•
HP Heavyweight Coated Paper
•
HP Satin Poster Paper
•
HP Matte film
•
HP Banners with Tyvek®
•
HP High-Gloss Photo Paper
•
HP Colorfast Adhesive Vinyl
•
HP Semi-Gloss Photo Paper
Introduction
Media & Ink
Using this Guide
Solutions
Front Panel
Introducing Your
HP DesignJet 800 Printer
Printer
Options
Front View of Printer
Other
Index
Printer Connections
User Interface
The printer's front panel includes an easy-to-use interface with a display, giving you access to a comprehensive
set of printer functions.
See Navigating the Menu System, for a short tutorial to teach you how to navigate through the menus and a
description of internal prints.
Introduction
Media & Ink
Using this Guide
Solutions
Front Panel
Introducing Your
HP DesignJet 800 Printer
Printer
Options
Front View of Printer
Other
Index
Printer Connections
Memory
The D/A1 size and A0+/E+ size HP DesignJet 800 printers come with a total of 96MB of Random Access Memory
(RAM) – 32MB in the printer and 64MB on the HP-GL/2 Accessory card. You can expand this memory to 160MB by
replacing the 64MB of memory on the HP-GL/2 Accessory card with an optional 128MB memory upgrade
(PN C2388A). In addition to this memory, the printer has a 6GB internal hard disk drive used as extended memory for
HP-GL/2 rendering and print management.
Introduction
Media & Ink
Using this Guide
Solutions
Printer
Options
Front Panel
Introducing Your
HP DesignJet 800 Printer
Front View of Printer
Other
Index
Printer Connections
Drivers
Always use the right driver (configured correctly) for the combination of your application software and your printer to
ensure that your printer prints exactly what you were expecting in terms of: size, position, orientation, color and quality.
NOTE:
Many software applications include their own drivers.
Your HP DesignJet 800 printer comes supplied with:
• Windows drivers
• AutoCAD drivers for Windows.
• Adobe PostScript® drivers for Macintosh® (QuickDraw™)
• Adobe PostScript® drivers for Microsoft® Windows™ applications
• Windows drivers
• AutoCAD drivers for Windows.
NOTE:
If AutoCAD drivers are available for the specific AutoCAD release you are using, it is strongly
recommended that you install them to print from AutoCAD.
Introduction
Media & Ink
Using this Guide
Solutions
Front Panel
Introducing Your
HP DesignJet 800 Printer
Printer
Options
Front View of Printer
Other
Front View of Printer
Ink Cartridge
Power
Switch/Indicator
Printhead
Front Panel
Index
Printer Connections
Introduction
Media & Ink
Using this Guide
Solutions
Front Panel
Introducing Your
HP DesignJet 800 Printer
Printer
Options
Other
Front View of Printer
Index
Printer Connections
Printer Connections
Your HP DesignJet 800 printer can be connected
directly to your computer via the traditional parallel
interface or through the Universal Serial Bus (USB)
port.
Connection
For Local Area Network (LAN) connection your printer
has an HP JetDirect Print Server Fast Ethernet 10/100
base TX network interface card.
See the Setup Poster for information on connecting
your printer to a computer or network.
Power socket
Parallel Port Connection
USB Connection
Introduction
Media & Ink
Media Choice
Roll Media
Solutions
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Media & Ink
The D/A1 size and A0+/E+ size format HP DesignJet 800 Printers use a variety of media. The recommended media is
engineered to use with your printer and your printer’s ink system to give you the best results.
The Media & Ink Tab contains these topics:
•
Media Choice explains how to choose the correct media type. Choosing the correct paper type for your needs is
an essential step in ensuring good image quality.
•
Roll Media details the procedures used for loading and unloading your roll media.
•
Sheet Media details the procedures used for loading and unloading your sheet media.
•
Ink System gives you an overview of the printer’s ink system, with some warnings and precautions for it’s optimum
use.
•
Ink Cartridges details the procedures used for: obtaining information, interpreting errors, checking levels and
replacing ink cartridges.
•
Printheads details the procedures used for: obtaining information, interpreting errors, replacing printheads and
aligning printheads.
Introduction
Media Choice
Media & Ink
Roll Media
Solutions
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Media Choice
•
Choosing Paper or Other Media
Your printer supports several types of paper. Choosing the best paper type for your needs is an essential step in
ensuring good image quality. These topics help you to select the best media for your particular printing task.
•
Paper Types
Provides detailed information concerning the different media types available for you printer. This includes
information on: the types of paper supported, their physical characteristics, quality selection, handling and how to
obtain information.
•
Print Times for a Selected Print Quality
Typical Printing Times for color and black lines and images on different types of paper.
•
Printable Area
The dimensions for all the printable areas for all paper and other types of media formats.
Introduction
Media & Ink
Media Choice
Roll Media
Solutions
Printer
Options
Front Panel
Sheet Media
Ink System
Other
Ink Cartridges
Index
Printheads
Choosing Paper or Other Media
For best printing results, use only genuine Hewlett-Packard paper or other type of media, whose reliability and
performance have been developed and thoroughly tested. All Hewlett-Packard printing components (printer, ink system,
and paper/other media) have been designed to work together to give trouble-free performance and optimal image
quality.
For detailed information on Hewlett-Packard paper, see Paper Types.
You should also take note of some important points about paper and other types of media:
•
This printer supports many types of paper. However, the quality of some images may be reduced if you do not use
the correct paper for your application. For example images with large regions of intense color, where many ink
drops are needed to fully saturate the color, will not print well on HP Bright White InkJet Paper. On HP Coated
paper, the same images might cause the paper to wrinkle and then come into contact with the printheads, smearing
your print and risking damage to the printhead. See Combinations of Media Type and Print Quality Selection.
•
Whenever you load a roll or a sheet, the printer's front-panel display prompts you to specify the paper type you are
loading. It is absolutely essential to specify this correctly for good image quality. The Physical Characteristics of
Paper Types table gives you all the information you need. If paper is already loaded and you are unsure which
paper type was specified, go to the Paper Menu and press Enter, see Obtaining Roll or Sheet Paper Information.
•
Make sure the appropriate print-quality setting (Best, Normal or Fast) is selected. You can set the print quality
either from your software or from the printer's front panel (software driver settings override any print-quality settings
made on the front panel). The combination of paper type and print-quality settings tells the printer how to place the
ink on the paper—for example, the ink density, dithering method, and number of passes of the printheads. For more
details, see Combinations of Media Type and Print Quality Selection.
•
Included with this printer is the Hewlett-Packard Printing Materials catalog which gives ordering
details for Hewlett-Packard paper supplies. To get the latest version of this document, contact
your local Hewlett-Packard Sales and Support office.
Introduction
Media & Ink
Media Choice
Roll Media
Solutions
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Paper Types
The following topics address the various types of media available, their particular use and how to obtain information
about them.
•
Physical Characteristics of Paper Types
Details the physical characteristics of each of the supported paper types.
•
Combinations of Media Type and Print Quality Selection
Gives guide lines for selecting the correct Print Quality selection for the type of paper or other type of media you
are using.
•
Handling Your Paper or Type of Media
Explains the precautions to take when handling paper or other type of media.
•
Obtaining Roll or Sheet Paper Information
Introduction
Media Choice
Media & Ink
Solutions
Roll Media
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Physical Characteristics of Paper Types
The following table lists the physical characteristics and selection numbers of supported HP Premium Printing Material.
Always print on the image side with the special coating. Image side faces outward on roll products from
Hewlett-Packard.
Physical Characteristics of Paper and Other Media
HP Premium Printing Material
HP Bright White Inkjet Paper (Bond)
24 lb. (90g/m2) - 150 ft. (45m)
HP Vellum
3 mil (75g/m2) - 150 ft. (45m)
HP Natural Tracing Paper
3 mil (90g/m2) - 150 ft. (45m)
HP Coated Paper
26 lb. (98g/m2) - 150 ft. (45m)
24 inch
610 mm
36 inch
914 mm
C1860Aa
C6035Ab
C3862A
C1861Aa
C6036Ab
C3861A
C3869A
C3868A
C6019B
C6020B
42 inch
1067 mm
C6559Ba
C6567Bb
C6569C
HP Heavyweight Coated Paper
C6029C
C6030C
35 lb. (130g/m2) - 100 ft. (30m)
HP Matte film
51642A
51642B
5 mil (198g/m2) - 120 ft. (36m)
HP High-Gloss Photo Paper
C6813A
C6814A
8 mil (207g/m2) - 100 ft. (30m)
Click on the Next Page Icon to see more Paper and Other Media Types
Introduction
Media Choice
Media & Ink
Roll Media
Solutions
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Physical Characteristics of Paper and Other Media (Continued)
HP Premium Printing Material
HP High-Gloss Photo Paper
6 mil (158g/m2) - 100 ft. (30m)
HP Semi-Gloss Photo Paper
6 mil (158g/m2) - 100 ft. (30m)
HP Paper-Based Semi-Gloss
6 mil (158g/m2) - 100 ft. (30m)
HP Clear film
4 mil (174g/m2) - 75 ft. (22m)
HP Translucent bond
3 mil (67g/m2) - 75 ft. (45m)
HP Studio Canvas
20 mil (368g/m2) - 35 ft. (10m)
HP Satin Poster Paper
5.5 mil (162g/m2) - 100 ft. (30m)
HP Banners with Tyvek®
10 mil (140g/m2) - 50 ft. (15m)
HP Colorfast Adhesive Vinyl
10 mil (140g/m2) - 50 ft. (15m)
24 inch
610 mm
C3882A
C3881A
C3884A
C3883A
C6782A
C6783A
C3876A
C3875A
C3860A
C3859A
C6771A
C7011A
C6786A
a. Available in United States, Canada & Latin America
b. Available in Europe, Asia & Japan
Additional Information About Paper Types
36 inch
914 mm
C6787A
C6775A
42 inch
1067 mm
Index
Printheads
Introduction
Media & Ink
Media Choice
Roll Media
Solutions
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Additional Information About Paper Types
The following HP Premium Printing Material can be used to perform the printhead alignment, see Printhead Alignment.
•
HP Bright White Inkjet Paper (Bond)
•
HP Coated Paper
•
HP Heavyweight Coated Paper
•
HP High-Gloss Photo Paper
•
HP Satin Poster Paper
You can also use Plain Paper in addition to the above.
To order any of the HP Premium Printing Material see the pamphlet Hewlett-Packard Printing Materials.
From time to time, new paper types may become available. For up-to-date information, please contact your
Hewlett-Packard dealer, local Hewlett-Packard Sales and Support Office or the DesignJet Online web site.
Introduction
Media & Ink
Media Choice
Roll Media
Solutions
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Combinations of Media Type and Print Quality Selection
Use the following tables, given by application, to guide you when choosing your paper and selecting the print quality
setting (Fast, Normal, Best).
•
CAD Drawings—Mono
•
CAD Drawings & GIS—COLOR (Lines and low density)
•
CAD Rendering, GIS & Images—COLOR and CAD (high ink density)
As a general guide:
•
Use Fast to get draft copies of your prints at maximum throughput
•
Normal is optimized so that you get the best line quality with the fastest throughput
•
Select Best if you want to get the best quality for images and renderings
Introduction
Media Choice
Media & Ink
Roll Media
Solutions
Printer
Options
Front Panel
Sheet Media
Ink System
Other
Ink Cartridges
CAD Drawings—Mono
The following table lists the recommended print quality settings for specific usage with typical media.
Supported Paper Types—MONO
Usage
Typical Media Selection
Recommended Print
Quality Setting
Drafts
Plain Paper
Bright Inkjet Paper
Natural Tracing Paper
Translucent Bond
Fast or normal
Final Versions
Plain Paper
Bright Inkjet Paper
Natural Tracing Paper
Translucent Bond
Coated paper
Heavy Coated Paper
Matte Film
Clear film
Normal or Best
Archives
Vellum
Matte Film
Clear Film
Best
Diazo
Translucent Bond
Natural Tracing Paper
Vellum
Matte Film
Normal or Best
Index
Printheads
Introduction
Media Choice
Media & Ink
Roll Media
Solutions
Printer
Options
Front Panel
Sheet Media
Ink System
Other
Ink Cartridges
CAD Drawings & GIS—COLOR (Lines and low density)
The following table lists the recommended print quality settings for specific usage with typical media.
Supported Paper Types—COLOR
Usage
Typical Media Selection
Recommended Print
Quality Setting
Drafts
Plain Paper
Bright Inkjet Paper
Natural Tracing Paper
Translucent Bond
Fast or Normal
Final Versions
Plain Paper
Bright Inkjet Paper
Coated paper
Heavy Coated Paper
Matte Film
Clear film
Normal or Best
Archives
Matte Film
Clear Film
Best
Transparencies
Clear Film
Normal or Best
Index
Printheads
Introduction
Media Choice
Media & Ink
Roll Media
Solutions
Printer
Options
Front Panel
Sheet Media
Ink System
Other
Ink Cartridges
CAD Rendering, GIS & Images—COLOR and CAD (high ink density)
The following table lists the recommended print quality settings for specific usage with typical media.
Supported Paper Types—COLOR and CAD
Usage
Matte Paper
Typical Media Selection
Heavy Coated Paper
Recommended Print
Quality Setting
Normal or Best
Glossy
High Gloss Photo Paper
Normal or Best
Transparencies
Clear Film
Best
Index
Printheads
Introduction
Media Choice
Media & Ink
Roll Media
Solutions
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Handling Your Paper or Type of Media
Take the following precautions when handling paper or other type of media:
•
Handle film and glossy paper by the edges or wear cotton gloves. Skin oils can interact with the ink and cause it to
smear.
•
Although the ink systems supplied with this printer have good light fastness, colors will eventually fade or change if
exposed to sunlight over a long period of time.
•
Rewrap partially used rolls if they are not being used and do not stack rolls.
•
Always keep unused rolls in their plastic wrappings to prevent discoloration.
Introduction
Media Choice
Media & Ink
Roll Media
Solutions
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Obtaining Roll or Sheet Paper Information
If roll media or sheet media is loaded, the type of media is displayed when you select the Paper menu on the front
panel.
Bright White Inkjet Paper
Plain Paper
Vellum
Natural Tracing Paper
Translucent Bond
Clear Film
Matte Film
Coated Paper
Heavy Coated Paper
High-Gloss Photo
Canvas
Poster Paper
Roll or Sheet
If there is no paper loaded the front panel display shows the following message and you will need to load roll or sheet
media.
Introduction
Media & Ink
Media Choice
Roll Media
Solutions
Printer
Options
Front Panel
Sheet Media
Ink System
Other
Ink Cartridges
Print Times for a Selected Print Quality
The following table lists some Typical Printing Times D/A1 size.
Typical Printing Times
Print Quality
Time (in seconds)
Mono Lines
on Bond
Color Lines
on Coated
Paper
Images
on Coated
Paper
Images
on Glossy
Paper
Fast
69
96
234
480
Normal
216
216
550
690
Best
360
285
940
990
More Printing Times
Index
Printheads
Introduction
Media & Ink
Media Choice
Roll Media
Solutions
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Printable Area
The following topics detail the printable areas for each of the different paper size systems:
•
ANSI Paper
The American National Standards Institute imperial paper sizing system.
•
Architectural Paper
The Architectural paper sizing system.
•
ISO Paper
The International Standards Organization metric paper sizing system which is commonly size system used in
Europe.
Introduction
Media & Ink
Media Choice
Roll Media
Solutions
Printer
Options
Front Panel
Sheet Media
Ink System
Other
Index
Ink Cartridges
Printheads
ANSI Paper
The following table lists the printable area for the ANSI paper size system.
The left & right margins are 0.2 inches (5 mm) and the leading & trailing edge margins are 0.7 inches (17 mm).
Where:
Printable area = Paper Size – Margins
Printable Areas for ANSI paper
Printable area (Width x Height) by Image Orientation
Paper
Size
Orientation of
Paper in
Printer
Inches
Landscape
Width
A
B
C
D
E
Portrait
Landscape
Portrait
Landscape
Portrait
Landscape
Portrait
Landscape
Portrait
Landscape
9.7
7.2
15.7
9.7
20.7
15.7
32.7
20.7
N/A
32.7
Height
8.1
10.6
10.6
16.6
16.6
21.6
21.6
33.6
43.6
Millimeters
Portrait
Width
8.1
10.6
10.6
16.6
16.6
21.6
21.6
33.6
33.6
N/A
Height
9.7
7.2
15.7
9.7
20.7
15.7
32.7
20.7
42.7
Landscape
Width
245
182
398
245
525
398
830
525
N/A
830
Height
206
269
269
422
422
549
549
854
1108
Portrait
Width
206
269
269
422
422
549
549
854
854
N/A
Height
245
182
398
245
525
398
830
525
1084
Indicates this printable area is only available if you are using the A0+/E+ size format
HP DesignJet 800 printer
Introduction
Media Choice
Media & Ink
Roll Media
Solutions
Printer
Options
Front Panel
Sheet Media
Ink System
Other
Index
Ink Cartridges
Printheads
Architectural Paper
The following table lists the printable area for the Architectural paper size system.
The left & right margins are 0.2 inches (5 mm) and the leading & trailing edge margins are 0.7 inches (17 mm).
Where:
Printable area = Paper Size – Margins .
Printable Areas for Architectural paper
Printable area (Width x Height) by Image Orientation
Paper
Size
Orientation of
Paper in
Printer
Inches
Landscape
Width
C
D
E1
E
Portrait
Landscape
Portrait
Landscape
Portrait
Landscape
Portrait
Landscape
22.7
16.7
34.7
22.7
40.7
28.7
N/A
34.7
Height
17.6
23.6
23.6
35.6
29.6
41.6
47.6
Millimeters
Portrait
Width
17.6
23.6
23.6
35.6
29.6
41.6
35.6
N/A
Height
22.7
16.7
34.7
22.7
40.7
28.7
46.7
Landscape
Width
576
423
880
576
1033
728
N/A
880
Height
447
600
600
904
752
1057
1209
Portrait
Width
447
600
600
904
752
1057
904
N/A
Height
576
423
880
576
1033
728
1185
Indicates this printable area is only available if you are using the A0+/E+ size format
HP DesignJet 800 printer
Introduction
Media & Ink
Media Choice
Roll Media
Solutions
Printer
Options
Front Panel
Sheet Media
Ink System
Other
Index
Ink Cartridges
Printheads
ISO Paper
The following table lists the printable area for the ISO paper size system.
The left & right margins are 0.2 inches (5 mm) and the leading & trailing edge margins are 0.7 inches (17 mm).
Where:
Printable area = Paper Size – Margins
Printable Areas for ISO paper
Printable area (Width x Height) by Image Orientation
Paper
Size
Orientation of
Paper in
Printer
Inches
Landscape
Width
A4
A3
A2
A1
A0
Portrait
Landscape
Portrait
Landscape
Portrait
Landscape
Portrait
Landscape
Portrait
10.4
6.9
15.2
10.4
22.0
15.2
31.7
22.0
N/A
Height
7.9
11.3
11.3
16.1
16.1
23.0
23.0
32.7
Millimeters
Portrait
Width
7.9
11.3
11.3
16.1
16.1
23.0
23.0
32.7
32.7
Height
10.4
6.9
15.2
10.4
22.0
15.2
31.7
22.0
45.4
Landscape
Width
263
176
386
263
560
386
806
560
N/A
Height
200
287
287
410
410
584
584
830
Portrait
Width
200
287
287
410
410
584
584
830
830
Height
263
176
386
263
560
386
806
560
1154
Indicates this printable area is only available if you are using the A0+/E+ size format
HP DesignJet 800 printer
Introduction
Media & Ink
Media Choice
Roll Media
Solutions
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Roll Media
The following procedures are described in detail, with animations where appropriate:
•
Installing a New Roll on the Printer
•
Loading Roll Media
•
Unloading Roll Media
•
Removing Roll Media from the Spindle
•
Cutter Replacement
Index
Printheads
Introduction
Media Choice
Media & Ink
Roll Media
Solutions
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Installing a New Roll on the Printer
The animation sequence shows how to install a new roll of
paper on the printer.
CAUTION: Make sure the printer wheels are locked
(the brake lever on each wheel is pressed
Down) to prevent the printer from moving.
If you are a regular user of different types of roll paper, you
can change the paper quicker if you have more than one
spindle. This allows you to do the following:
1. Pre-load the different types of paper onto the spindles.
2. Remove and replace the spindle with the new type of
paper.
NOTE:
Click on this
Additional spindles are available from
Hewlett Packard as accessories.
icon to run the animation sequence.
A printable version of the sequence is also available so that you can take the key illustrations to the printer, if it's remote
from your computer.
Introduction
Media & Ink
Media Choice
Roll Media
Solutions
Front Panel
Sheet Media
Loading Roll Media
The animation sequence shows how to load a new roll of
paper on the printer.
NOTE:
You must have installed a new roll of paper
on the printer before you can load it.
The front-panel menu items are:
Select (using the
keys)
Then Press:
1. Paper
Enter
2. Load Roll
Enter
3. Select Roll Type
Enter
Click on the
icon to run the animation sequence.
A printable version of the sequence is also available so
that you can take the key illustrations to the printer, if it's
remote from your computer.
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Introduction
Media Choice
Media & Ink
Roll Media
Solutions
Front Panel
Sheet Media
Unloading Roll Media
The animation sequence shows how to unload a roll of
paper from the printer.
Click on the
icon to run the animation sequence.
A printable version of the sequence is also available so
that you can take the key illustrations to the printer, if it's
remote from your computer.
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Introduction
Media Choice
Media & Ink
Roll Media
Solutions
Front Panel
Sheet Media
Removing Roll Media from the Printer
The animation sequence shows how to remove a roll of
paper from the printer.
NOTE:
Click on the
You must have unloaded the roll of paper
from the printer before you can remove it.
icon to run the animation sequence.
A printable version of the sequence is also available so
that you can take the key illustrations to the printer, if it's
remote from your computer.
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Introduction
Media Choice
Media & Ink
Roll Media
Solutions
Front Panel
Sheet Media
Removing Roll Media from the Spindle
The animation sequence shows how to remove a roll of
paper from the roll spindle.
NOTE:
Click on the
You must have removed the roll of paper
from the printer before you can remove it
from the spindle.
icon to run the animation sequence.
A printable version of the sequence is also available so
that you can take the key illustrations to the printer, if it's
remote from your computer.
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Introduction
Media & Ink
Media Choice
Solutions
Roll Media
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Cutter Replacement
The animation sequence shows the complete procedure
for the replacement of the paper cutter in your printer.
Prerequisites
Before attempting to replace the cutter you must contact
your local HP Customer Care center to:
•
Order the replacement cutter.
•
Receive instructions on how to access the Front Panel
Service Menu.
Important Information
•
The cutter unit is attached to the printer by a black cutter holder that runs along the metal guide rail, and is
hooked onto the edge of the platen at the front of the
printer.
•
The cutting wheel is inside the cutter unit.
•
Do not remove the cutter holder.
•
When inserting the new cutter, with the cutter holder raised to about 45 degrees, partially insert the cutter so it rests
in the cutter holder, but do NOT clip it in at this stage.
CAUTION: Be very careful when replacing the cutter because you can easily break the cutter holder if you apply
too much force.
Click on the
icon to run the animation sequence. A printable version of the sequence is
also available so that you can take the key illustrations to the printer, if it's remote from your
computer.
Introduction
Media & Ink
Media Choice
Roll Media
Solutions
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Sheet Media
•
Which Side Up
Instructs you how to identify which side of the sheet media should be printed on.
•
Which Edge First
Explains which edge of the sheet should be loaded first (short edge or long edge).
•
Loading Sheet Media
Details the sheet media loading procedure.
•
Unloading Sheet Media
Details the sheet media unloading procedure.
Index
Printheads
Introduction
Media & Ink
Media Choice
Solutions
Roll Media
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Which Side Up
The printer prints on the side of the paper facing up. It can be important to load the sheet with the correct side facing up.
See the table below.
Print Side for Media Types
Media Type
HP Bright White Inkjet Paper (Bond)
HP Vellum
Matte or Glossy
Both sides are the same. If sheet
is curled, load with curl down.
Natural Tracing Paper
Coated Paper
Load with the coated side up.
Heavy Coated Paper
Matte Film
Load with the matte side up.
High-Gloss Photo
Load with the glossy side up.
Clear Film
Translucent Bond
Both sides are the same. If sheet
is curled, load with curl down.
Canvas
Poster Paper
Plain Paper
Both sides are the same. If sheet
is curled, load with curl down.
Introduction
Media Choice
Media & Ink
Roll Media
Solutions
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Which Edge First
You can load sheet paper in either portrait or landscape orientation. Unless you are using the Rotate option, always load
the sheet in the same orientation as you have specified in your software.
Landscape (Long edge first)
Portrait (Short edge first)
Introduction
Media & Ink
Media Choice
Solutions
Roll Media
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Loading Sheet Media
The animation sequence shows how to load a new sheet
of paper on the printer.
Important
•
If you have a roll of paper loaded on the printer you
must first unload it from the printer.
•
Make sure the correct side of the sheet is facing up
when you load it.
The front panel menu selections are:
Select (using the
keys)
Then Press:
1. Paper
Enter
2. Load sheet
Enter
3. Select Sheet Type
Enter
Click on the
icon to run the animation sequence.
A printable version of the sequence is also available so that you can take the key illustrations to the printer, if it's remote
from your computer.
Introduction
Media Choice
Media & Ink
Roll Media
Solutions
Front Panel
Sheet Media
Unloading Sheet Media
The animation sequence shows how to unload a sheet of
paper from the printer.
Important
•
To give the ink time to dry the printer holds the paper
for some time.
Click on the
icon to run the animation sequence.
A printable version of the sequence is also available so
that you can take the key illustrations to the printer, if it's
remote from your computer.
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Introduction
Media & Ink
Media Choice
Roll Media
Solutions
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Ink System
These topics cover the various elements of the Ink System.
•
What are HP Ink Supplies?
Details the elements of the HP Ink Supplies supplies.
•
Component identification
Shows you where to find the various elements of the Ink System.
•
Ink Supply Guidelines
Explains how to obtain the best results from your Ink System
•
Precautions
Details the specific precautions you must take to avoid damaging the components of your Ink System.
•
Color Calibration
Explains how to calibrate the ink system for the type of media loaded
•
When to Replace
Details on the expected life of your Ink System components.
•
Drying Time
Explains drying time function and details how to use it to ensure you obtain the highest quality print under all
conditions.
Introduction
Media & Ink
Media Choice
Solutions
Roll Media
Printer
Options
Front Panel
Sheet Media
Ink System
Other
Ink Cartridges
Index
Printheads
What are HP Ink Supplies?
For each of the four ink colors used in the printer, there are two separate components, the printhead and the
ink cartridge. These components are called the HP Ink Supplies and are coded with an Hewlett-Packard No. selection
number to help you reorder the correct replacement. Your HP DesignJet 800 printer uses the following HP Ink
Supplies:
•
Black Ink Cartridges are HP No 10 Supplies.
•
Cyan, Magenta and Yellow Cartridges are HP No 82 Supplies.
•
All Printheads are HP No 11 Supplies.
Ink Cartridges
The Hewlett-Packard ink cartridges for your printer require no maintenance or cleaning. As long as each ink cartridge is
inserted correctly into its slot, the ink will flow to the printheads. Because the printheads control the amount of ink
transferred to the page, you will continue to see high-quality printing results, even when the ink levels are getting low.
The front panel notifies you when an ink cartridge’s ink level is low. You can also check the ink levels of all the ink
cartridges to determine if an ink cartridge needs to be replaced, see Ink Cartridge Information.
If the ink cartridge is empty, the printer stops printing. See Ink Cartridge Replacement.
Printheads
The Hewlett-Packard printheads are extremely durable and do not need to be replaced every time an ink cartridge is
replaced. They are independent of the ink cartridges and will continue giving excellent image quality results even if the
ink cartridges are low in ink.
If you notice a decline in print quality such as lines or dots missing from text or graphics, see
Stepped Lines.
Introduction
Media Choice
Media & Ink
Solutions
Roll Media
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Component identification
The following illustration will help you identify the components of the HP Ink Supplies.
Printheads
Ink Cartridges
The Hewlett-Packard selection number on the ink cartridges and printheads makes it easy for you
to find the correct HP Ink Supplies for your printer. Determine the color of the printhead or ink
cartridge you need, then make sure you purchase or order the correct Hewlett-Packard printhead
or ink cartridge. Each ink cartridge and printhead can be purchased separately from your usual
Hewlett-Packard retailer. See Ordering Accessories and When to Replace HP Ink Supplies.
Introduction
Media Choice
Media & Ink
Roll Media
Solutions
Printer
Options
Front Panel
Sheet Media
Ink System
Other
Ink Cartridges
Index
Printheads
Ink Supply Guidelines
For optimum results from your printer and the ink system, always follow these guidelines when handling the HP Ink
Supplies:
•
Always install the ink cartridges and printheads before the expiry date, which is on the packaging.
•
Install ink cartridges and print heads in their color-coded slots.
•
Follow the instructions on the front panel during installation.
•
Avoid unnecessary removal of the ink cartridges and printheads.
•
When turning off your printer always use the power off button on the front panel. The printheads are then parked
correctly which prevents them from drying out.
•
The ink cartridges should never be removed while the printer is printing. They should only be removed when the
printer is ready for you to replace them. The front panel will guide you through the removal and installation procedure. See When to Replace HP Ink Supplies.
CAUTION: When you first received your printer it was supplied with a set of four setup printheads installed in
the printhead carriage. These setup printheads are used for the priming of the tubes in the modular
ink delivery system. Do not remove the setup printheads from the carriage without following the
procedures in the Setup Poster.
Introduction
Media & Ink
Media Choice
Roll Media
Solutions
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Precautions
Handle the HP Ink Supplies with care. In particular the printhead, which is a high precision device and must be handled
carefully.
CAUTION: Do not touch, wipe or attempt to clean the printhead nozzles. This can damage the printhead.
•
Do not put the printhead down on the nozzles.
•
Do not be rough when handling the printheads. Always
set them down gently.
•
Do not drop the printheads. Proper handling will
assure optimum performance throughout the printhead life.
•
Do not touch the end of the ink cartridge which is
inserted into the printer as there may be a small
amount of ink on the connection.
•
Avoid storing partially used ink cartridges on their
ends.
Introduction
Media Choice
Media & Ink
Solutions
Roll Media
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Color Calibration
You can calibrate the ink system for the specific media loaded in your printer. Doing this ensures the printed output
matches the colors of the original image as closely as possible. The printer stores the calibration data for each type of
media you have calibrated it for since it was powered up. Once the printer has been powered down the next time you
use it only the last calibration made will be available and it will print using this calibration data.
To color calibrate your printer, first make sure you have the correct type of media loaded and then make the following
front panel selections:
Select (using the
keys)
Then Press:
1. Ink
Enter
2. Color calibration
Enter
3. Calibrate Paper
Enter
The printer prints a calibration pattern and scans it to create the calibration data for the type of media loaded.
If you want to check the color calibration status of your printer, make the following front panel selections:
Select (using the
keys)
Then Press:
1. Ink
Enter
2. Color calibration
Enter
3. Status
Enter
The front panel display shows what types of media the ink system is currently calibrated for.
To remove all the calibrations and reset the printer to its factory values choose
Color calibration > Reset from the Ink menu.
Introduction
Media & Ink
Media Choice
Roll Media
Solutions
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
When to Replace
When to change your HP Ink Supplies is mostly determined by you with guidance from the front panel. This information
is provided for:
•
Ink Cartridges
•
Printheads
Introduction
Media & Ink
Media Choice
Roll Media
Solutions
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Drying Time
The following topics detail drying time function and how to use it to ensure you obtain the highest quality print under all
conditions.
•
Drying Time Settings
Describes how to set the required drying times from the Front Panel.
•
Typical Drying Times
Lists typical drying times for Hewlett Packard tested paper at approximately 25°C with 50% relative humidity.
•
Drying Procedure
Details how the drying procedure operates.
Introduction
Media Choice
Media & Ink
Roll Media
Solutions
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Drying Time Settings
With some paper types and environmental conditions the ink needs time to dry before the paper is unloaded. The
printer has three settings which you can choose through the front panel. See Navigation Example for more help.
Manual
The printer holds paper which has a specific drying in place and displays a “drying time to go” countdown on the front
panel. You can change this time from one minute to 99 minutes in one minute increments.
Automatic
The printer automatically determines the appropriate drying time, based on the type of paper you have selected and the
current temperature. If there is any drying time the printer displays a “drying time to go” countdown on the front panel.
None
With this setting, when the printer has finished printing an image the paper will fall into the paper bin under the printer.
CAUTION: Changing the drying time to speed up the printer could result in damage to your printed image or
reduce the quality of your print.
Introduction
Media Choice
Media & Ink
Solutions
Roll Media
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Typical Drying Times
The following table shows the typical drying times for Hewlett Packard tested paper at approximately 25°C with 50%
relative humidity.
Drying Times by Paper Types
Drying Time (seconds)
Hewlett Packard Tested Paper
Type
Fast
Normal
HP Bright White Inkjet Paper (Bond) 0
25
HP Vellum
60
120
HP Coated Paper
0
60
HP Heavyweight Coated Paper
0
60
HP Matte film
60
180
HP High-Gloss Photo Paper
120
Best
180
HP Natural Tracing Paper
HP Semi-Gloss Photo Paper
HP Paper-Based Semi-Gloss
HP Clear film
60
HP Translucent bond
60
HP Studio Canvas
6000
HP Satin Poster Paper
60
HP Banners with Tyvek®
HP Colorfast Adhesive Vinyl
120
180
Introduction
Media & Ink
Media Choice
Solutions
Roll Media
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Drying Procedure
The drying procedure operates as follows:
1. The printed image emerges from beneath the printer window and a vacuum holds it on the platen of the printer.
2. The front panel displays:
The countdown
timer indicates
how much
drying time
remains
3. You can press the Cancel or the Form Feed & Cut key to cancel the drying time and release the paper.
4. After the drying time has elapsed:
For roll media the printer cuts the media and turns off the vacuum so the printed image can drop into the printer bin.
For sheet media the vacuum is turned off and the printed image drops into the printer bin.
Introduction
Media Choice
Media & Ink
Roll Media
Solutions
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Ink Cartridges
•
Ink Cartridges Errors
Details the different error messages that could be displayed on the front panel for the Ink Cartridges.
•
Ink Cartridges Levels
Details the different levels information that can be displayed on the front panel for the Ink Cartridges.
•
Ink Cartridge Information
Shows you how to display the current status of the Ink Cartridges on the Front Panel display.
•
Ink Cartridge Replacement
Details the Ink Cartridge replacement procedure.
Introduction
Media & Ink
Media Choice
Roll Media
Solutions
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Ink Cartridges Errors
Front Panel can display the following error messages for the ink cartridges:
Cartridge
Missing
Faulty
Cartridge
NOTE:
Cartridge
Nearly
Reached
End of Life
Cartridge
Empty
If a cartridge has actually passed its expire date it will be shown as a faulty cartridge and will have
to be replaced.
The printer will also display the Ink Cartridges Levels.
Introduction
Media & Ink
Media Choice
Roll Media
Solutions
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Ink Cartridges Levels
Front Panel will tell you when your ink supply is low, very low or empty. This means you know current status of your HP
Ink Supplies all the time:
Cartridge
Full
Low Ink
Warning
Cartridge
Empty
NOTE:
Depending on type of print jobs, a cartridge with a Low Ink Warning may in fact
last quite a long time (i.e. line drawings).
NOTE:
The Ink Cartridges levels information can also be selected with
Ink menu > Information > Ink Cartridges > Ink Levels if it is not automatically
shown in the Ink menu.
Introduction
Media & Ink
Media Choice
Solutions
Roll Media
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Ink Cartridge Information
Use the following procedure to display the Ink Cartridge Information screen on the front panel.
The front-panel menu items are:
Select (using the
keys)
Then Press:
1. Ink
Enter
2. Information
Enter
3. Ink Cartridges
Enter
4.
Cyan, Magenta, Yellow or
Black Ink cartridge
Enter
The front panel displays the following information for the selected ink cartridge:
•
Color: Cyan, Magenta, Yellow or Black.
•
Model: Hewlett-Packard No 82 (Cyan, Magenta & Yellow) or Hewlett-Packard No 10 (Black).
•
Status: inserted, low on ink, out of ink, missing, expired and faulty.
•
Expiration date.
•
Serial Number.
•
Ink Level: in cc and % used.
Index
Printheads
Introduction
Media Choice
Media & Ink
Solutions
Roll Media
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Ink Cartridge Replacement
The animation sequence opposite shows how to replace
an Ink Cartridge.
WARNING: Make sure the printer wheels are locked
(the brake lever is pressed down) to
prevent the printer from moving.
CAUTION: Only remove an ink cartridge if you are
replacing it.
CAUTION: Do not replace cartridges while the printer
is printing because doing this will cancel
the current print job.
You would need to change cartridges either if prompted to
do so on the Front Panel because the printer has detected
a cartridge is out of ink or the cartridge is low and you want
to replace it before it runs out.
Click on the
icon to run the animation sequence.
A printable version of the sequence is also available so that you can take the key illustrations to the printer, if it's remote
from your computer.
Introduction
Media & Ink
Media Choice
Roll Media
Solutions
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Printheads
•
Printhead Errors
Details the different error messages that could be displayed on the front panel for the Printheads.
•
Printhead Information
Shows you how to display the current status of the Printheads on the Front Panel display.
•
Printhead Replacement
Details the Printhead Replacement procedure.
•
Printhead Alignment
Details the Printhead Alignment procedure.
Index
Printheads
Introduction
Media & Ink
Media Choice
Roll Media
Solutions
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Printhead Errors
Front Panel can display the following error messages for the printheads:
Printhead
Missing
Faulty
Printhead
NOTE:
Printhead
Worn Out
Unknown
Error
An unknown error is displayed when one of the printheads is causing a problem
but the system cannot detect which one it is. Refer to Unknown Printhead Error
to solve this problem.
Introduction
Media & Ink
Media Choice
Solutions
Roll Media
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Printhead Information
Use the following procedure to display the Printheads Information screen on the front panel.
The front panel menu selections are:
Select (using the
keys)
Then Press:
1. Ink
Enter
2. Information
Enter
3. Printhead
Enter
4.
Cyan, Magenta, Yellow or
Black printhead
Enter
The front panel displays the following information for the selected printhead:
•
Color: Cyan, Magenta, Yellow or Black
•
Model: Hewlett-Packard No 11 and Warranty (In warranty or out of warranty)
•
Status: inserted, missing, faulty worn-out and unknown.
If there is a problem the system displays an action: missing -> insert, unknown -> troubleshoot,
faulty, worn out -> replace.
•
Expiration date.
•
Serial Number.
•
Ink Used: in cc and % used.
•
Paper Jams.
•
If the printheads are aligned and color calibrated.
Index
Printheads
Introduction
Media & Ink
Media Choice
Solutions
Roll Media
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Printhead Replacement
The animation sequence shows how to replace a
printhead in the printer.
The front panel menu selections are:
Select (using the
keys)
Then Press:
1. Ink
Enter
2. Replace Printheads
Enter
Click on the
icon to run the animation sequence.
A printable version of the sequence is also available.
Once you have replaced the printhead, if you have media
loaded, the printer prompts you to start the Printhead
Alignment procedure. If no media is loaded the printer
prompts you to load paper and then automatically starts
the alignment. The alignment takes several minutes to complete and then printer will then prompts you to run the Color
Calibration procedure.
Introduction
Media Choice
Media & Ink
Solutions
Roll Media
Front Panel
Sheet Media
Printer
Options
Ink System
Other
Ink Cartridges
Index
Printheads
Printhead Alignment
You should have one of the following types of paper loaded before attempting to align the printheads: HP Bright White
Inkjet Paper (Bond), HP Coated Paper, HP Heavyweight Coated Paper, HP High-Gloss Photo Paper, HP Satin Poster
Paper or Plain Paper. If you try to do this with any other type of paper loaded the printer will prompt you to load a
different type of paper before letting you align the printheads.
From time to time you may be required to align the printheads to ensure maximum print quality. To manually select the
printhead alignment make sure you have the correct type of roll or sheet media loaded.
There are two types of alignment, Standard which will take about 4½ minutes, or Special which takes about 11 minutes.
Standard alignment is recommended for normal use and requires paper of at least A4/Letter-size, loaded in landscape
mode. Special alignment should be used to correct pen to paper spacing variations which would be show by variations
in vertical line quality, particularly in wide plots and fast print modes. Special alignment requires paper of at least
A3/B-size, loaded in landscape mode. Two separate prints are made.
Then use the following front panel menu selections to start the alignment:
Select (using the
keys)
Then Press:
1. Ink
Enter
2. Align Printheads
Enter
3.
Standard (4.5 minutes)
Special (11 minutes)
Enter
Once you have made this selection the printer starts the alignment process which then takes
several minutes.
The printer will also automatically use the standard alignment process to align its printheads after
Printhead Replacement. When the alignment procedure completes after a printhead replacement
the printer prompts you to ask if you want to run the Color Calibration procedure.
Introduction
Media & Ink
Solving Problems
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Media Problems
Printer
Options
Image Error
Other
Other Problems
Index
Getting Help
Solutions
These topics guide you through the different procedures required to troubleshoot and find the solution to various
problems you could encounter while using your printer.
The Solutions Tab contains these topics:
•
Solving Problems aids you to quickly troubleshoot your specific problem, it also contains instructions on where you
get further information.
•
Image Quality Problems helps you to solve any image quality problems you may be experiencing. It takes you
through the troubleshooting procedure step-by-step.
•
Ink Supply Problems guides you when you have problems installing the ink consumable items, the ink cartridge
and printhead.
•
Media Problems contains information on what to do if you have image smears or marks on your media and also
what to do if you have a media jam.
•
Image Error contains information on what to do if the image that your printer printed is incorrect, or not what you
expected.
•
Other Problems covers miscellaneous problems you could face.
•
Getting Help explains what to do if you cannot solve the problem you are having. It also provides full details of the
steps to take to contact the Hewlett Packard Customer Care Center.
Introduction
SolvingProblems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Media Problems
Printer
Options
Image Error
Other
Other Problems
Index
Getting Help
Solving Problems
•
To find the meaning of front-panel messages, see Message Descriptions.
•
If you know the problem is related to a certain task, first check the relevant section in this manual, for step-by-step
procedures. Use this manual's index or table of contents to find the section. For example, if you are having difficulty
with page formatting, refer to Page Format.
•
If the problem is directly related to the quality of your printed images, refer first to Image Quality Problems.
•
Refer to the appropriate topic:
– Ink Supply Problems
– Media Problems
– Communication Problems
– Image Error
– Other Problems
If the problem could be related to your software driver, and you are using an HP driver, refer to the driver’s troubleshooting documentation and the on-line help in your application software.
If the problem has no obvious cause, refer to Finding the Source of Your Problem.
If you still cannot solve the problem, see Getting Help.
•
•
•
Introduction
SolvingProblems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Media Problems
Printer
Options
Image Error
Other
Other Problems
Index
Getting Help
Finding the Source of Your Problem
1. Look at the front-panel display for messages. See Message Descriptions for a full explanation of front-panel
messages.
2. Test the printer.
– Switch the printer off on the front of the printer. Make sure that the power cord is firmly inserted in the printer and
plugged in to an outlet that you know works.
– Switch the printer on and make sure the front-panel display shows the HP welcome screen followed by Main
Menu after a short initialization period.
3. Test your computer hardware and interface.
– Make sure that you have the correct interface cable between the computer and the printer and that it is firmly
connected to the correct ports (see the Setup Poster).
– Check that your printer's graphics language setting (in Setup > Graphic Language) matches the requirements of
your software.
Introduction
Media & Ink
Solving Problems
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Media Problems
Printer
Options
Image Error
Other
Other Problems
Index
Getting Help
Image Quality Problems
Your HP DesignJet 800 printer provides a full troubleshooting utility to ensure you can always quickly overcome any
image problems you encounter. You should use this utility whenever you (and not the printer) perceive a problem with
print quality.
Often what you believe to be a print quality problem is in fact caused by incorrect configuration of the printer for the type
of image you are trying to print. Always check Configuration Correction as your first diagnostic task to find the cause of
your problem.
If a message, such as “PRINTHEADS not functional” appears on the front-panel of your printer, follow the instructions
given for the particular message (see Message Descriptions).
The types of problems you could possibly encounter are:
•
Stepped Lines
•
Incomplete Lines
•
Color Accuracy
•
Horizontal Banding
•
Color Alignment
Whenever you see any of these problems work through the Troubleshooting Procedure replying to the questions
displayed on the front-panel. This will lead you to correct remedial action required to solve your image quality problem.
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Media Problems
Printer
Options
Image Error
Other
Other Problems
Index
Getting Help
Configuration Correction
Before attempting the image quality diagnostic procedures contained in this section it is important to first check
that the printer is correctly configured to print what you want. Many problems concerned with image quality can be
solved by correcting the way the printer is configured.
1. To achieve the best performance from your printer, only use genuine HP accessories and supplies, whose
reliability and performance have been thoroughly tested to give trouble-free performance and best-quality prints.
For details of HP media, see Paper Types.
2. Make sure that the Type of paper selected in the front panel is the same type of paper loaded into the printer. To
check this go to the Roll or Sheet menu in the front panel and press Enter.
3. To ensure the maximum print quality use HP certified media only. For details of HP media see Physical
Characteristics of Paper Types. You can also look at the web page http://www.hp.com/go/designJet for the most up
to date information.
4. Make sure that the Print quality (Fast, Normal, Best) used for your printer is correct. This is set in the Print Setup
dialog box of the printer driver or in the front panel from the Set-up menu. The printer driver setting overrides the
front panel setting.
5. Select Best print mode for maximum print quality.
6. For Non-HP drivers, set front panel media settings to match the media type loaded in the printer. The
documentation that came with your software should provide information about media type/print quality settings.
7. If your image quality problem is color accuracy related, go to Color Accuracy for further configuration help.
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Media Problems
Printer
Options
Image Error
Other
Other Problems
Index
Getting Help
Troubleshooting Procedure
Working through the Troubleshooting procedure should always be your first action when you encounter image quality
problems. Refer to the Troubleshooting Flow Chart for a description of the sequence of processes used to complete
troubleshooting procedure.
It is important that the paper loaded for this procedure is exactly that used when you encountered image quality
problems,type (for example, glossy paper) . If you use a different kind of paper or a different size, you stand less
likelihood of resolving the problem.
Running the Troubleshooting Utility
1. From the main front-panel menu, select the Ink menu (
) and press Enter.
2. Select Troubleshooting and press Enter.
3. The printer first checks to see whether the printheads
are aligned. Misalignment of the printheads is a
common cause of image quality problems. If they are
not aligned, you are prompted to accept the Printhead
Alignment. This procedure requires a few centimeters
of paper loaded and takes several minutes to perform.
NOTE:
Note that you do not have to interpret the patterns printed by the Printhead Alignment routine.
4. If the printheads do not seem to require alignment, the printer prints Diagnostic Print A. See Diagnostic Print A
Interpretation for full details of how to use this diagnostic print.
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Media Problems
Printer
Options
Image Error
Diagnostic Print A Interpretation
Other
Index
Other Problems
Getting Help
Diagnostic Print A
Diagnostic Print A contains several blocks of color and a block of thin black broken
lines (the lines are actually very much closer than those represented here).
1. Examine the broken lines in Diagnostic Print A carefully and indicate whether
there are problems with them.
The sorts of problems to look for here are:
•
Jaggedness or serrations in the thin lines, like this:
; the thin lines should be straight,
though not necessarily perfectly aligned. The irregularities that are significant
extend along the whole of the length of the lines. Shorter irregularities,
arranged in columns, can be ignored at this stage.
Ignore this
black bar
2. Examine the blocks of color in Diagnostic Print A carefully and indicate whether
there are problems with them. The sorts of problems to look for here are:
•
White streaks or bands in the solid blocks.
3. If you indicate that there is a problem with the dashed lines in Diagnostic Print A,
you are prompted to use the Advance Calibration routine; your printer will be at step 3 of the routine (if you don’t
want to continue with calibration, press the Cancel key).
4. If there are problems in the blocks of color in Diagnostic Print A, for example white streaks or bands, the printer will
try to clean the printheads that have the problem. A printhead can be cleaned up to three times this way; after that
it cannot be cleaned and you will be told; the Troubleshooting routine will finish. In that case we recommend that
you try to reprint your print, and then, if necessary, start the Troubleshooting routine again.
After cleaning the printheads, the printer reprints the blocks of color (but not the black lines) in
Diagnostic Print A, and asks you to examine it again (as in step 1).
5. If there are no problems the first time you print Diagnostic Print A, the printer prints Diagnostic
Print B. See Diagnostic Print B Interpretation for full details of how to use this diagnostic print.
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Media Problems
Printer
Options
Image Error
Other
Index
Other Problems
Getting Help
Diagnostic Print B Interpretation
1. For each color in the pattern in Diagnostic Print B, you are asked about the
quality—look for missing lines. If you answer that a color is defective, the
printer tries to clean that printhead.
If the printhead cleaning process completes, Diagnostic Print B is printed
again and you are asked the same questions again.
2. Afterwards, if problems with images remain, use the Troubleshooting
procedure again.
Diagnostic Print B
Ignore these
solid bars
If none of the patterns or blocks in the two Diagnostic Prints shows any problem, it could be that your image quality
problem is caused by a wrong setting in your software, or perhaps the job should have been printed with the Print
quality set to Best instead of Normal or Draft.
If the Troubleshooting routine didn’t indicate that printhead alignment was necessary, you can select Align
printheads in the Ink menu to try to solve any further image quality problems.
Introduction
Media & Ink
Solving Problems
Image Quality
Problems
Solutions
Ink Supply
Problems
Printer
Options
Front Panel
Media Problems
Image Error
Other
Other Problems
Index
Getting Help
Troubleshooting Flow Chart
The following diagram shows the flow of the troubleshooting procedure.
Start
Printer checks
whether Printhead
Alignment is required
Printer recommends
Printhead Alignment
(Standard or Special)
Yes
No
Printer prints
Diagnostic Print A
including black lines
Printer prints
Diagnostic Print A
without black lines
Yes
Indicates that
toubleshooting has
completed but further
procedures are required
to solve the problem
Indicates that
toubleshooting has
completed successfully
and there no problems
Printheads are OK
after first printing of
Diagnostic Print A
No
Printer prints
Diagnostic Print B
without black lines
Printer asks if Cyan,
Magenta, Yellow and
Black Patterns in
Diagnostic Print B are
OK
Yes
Troubleshooting
completed successfully
Printheads need
cleaning. If possible
printer tries to clean
printheads
Printer asks questions
about Diagnostic
Print A
Wrong paper advance.
Printer recommends
Advance Calibration
No problems detected
Printer prints
Diagnostic Print B
No
If possible printer tries
to clean printheads
If printheads have
been cleaned three
time Troubleshooting
finishes
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Media Problems
Printer
Options
Other
Image Error
Index
Other Problems
Getting Help
Advance Calibration
It is important that the paper loaded for this calibration is exactly that used for normal printing, both in quality (for
example, glossy paper) and in width (for example, A0 or 36-inch). Either roll or sheet paper can be used.
The routine prints a pattern and then cuts the roll (the cutter must be set to ON - see Controlling the Cutter) or ejects the
sheet; it requires paper that is at least 65 cm/25.5 inches long and at least 50 cm/19.7 inches wide. You must then
reload that piece of paper as a sheet, so that the printer can accurately measure the pattern, and make whatever
adjustments are appropriate to the amount it advances between printing swaths of data. (See Loading Sheet Media)
The pattern printed is solely for the use of the printer; you are not expected to relate any of its characteristics to the quality of
your images.
2. Select Advance calibration and press Enter.
3. Select Create pattern and press Enter.
The printer prints its calibration pattern (as represented
opposite) and cuts or ejects the paper.
4. Load the sheet printed side up with the dotted line at the top
(that is, rotated 90º).
5. Now select Measure pattern and press Enter.
The printer reads the calibration pattern and makes the
appropriate internal adjustments.
These Advance Calibration Values are used whenever
you print on the same type of media until you have used
the Advance calibration twice more with different types
of media.
) and press Enter.
Direction of paper while
printing (creating pattern)
1. From the main front-panel menu, with the correct paper loaded, select the Paper menu (
Direction of paper when
loading (measuring pattern)
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Printer
Options
Media Problems
Image Error
Other
Other Problems
Index
Getting Help
Advance Calibration Values
The printer stores the advance calibration values of the last two different
types of media used for the calibration. When you print the printer ties to
match the media you have selected to the stored values. If there is a
match the printer applies the stored Advance calibration values.
If the type of media you are using has not been used for either of the last
two Advance calibrations the printer uses a set default values for your
media.
The Restore factory option of the Advance calibration menu erases any stored advance calibration values from the
printer memory. This means that until you run the advance calibration again the printer will use the factory default
values for all types of media.
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Media Problems
Printer
Options
Image Error
Other
Other Problems
Index
Getting Help
Stepped Lines
When you look at the image you have printed there are ‘stepped lines’ in the borders of arrows and diagonal
lines. The lines should be straight with no stepping.
The following is an example of what you might see if you have problems with Stepped Lines.
To solve this problem:
1. Increase the dpi setting by changing the print quality to Best in the front panel and driver software.
2. The problems may be inherent in the image you are trying to print. Try to improve the image with the application
that generated the file.
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Media Problems
Printer
Options
Image Error
Other
Other Problems
Incomplete Lines
When you look at the image you have printed there are:
• Missing or faint lines
• Printed characters having missing parts to them.
The following is an example of what you might see if you have problems with incomplete lines.
TEST
Missing parts of text; this
should say TEST
See the Troubleshooting Procedure for instructions on how to solve this problem.
Index
Getting Help
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Media Problems
Printer
Options
Image Error
Other
Other Problems
Index
Getting Help
Color Alignment
When you look at the image you have printed:
The colored lines are printing
double and they are the wrong
colors
The borders of colored blocks
are overlapped and the
overlapping areas have
different colors in them.
See the Troubleshooting Procedure for instructions on how to solve this problem.
Vertical lines are mis-aligned or
fuzzy (not smooth)
Introduction
Media & Ink
Solving Problems
Solutions
Image Quality
Problems
Front Panel
Ink Supply
Problems
Media Problems
Printer
Options
Image Error
Other
Other Problems
Index
Getting Help
Horizontal Banding
When you look at the image you have printed there are light or dark lines on the image, these are particularly
highlighted in high density ink areas. This problem is known as banding.
IMPORTANT
Banding can occur to a certain degree in Fast and Normal mode when printing high
density prints. To obtain the best image always print in Best Mode.
The following is an example of what you might see if you have problems with banding.
80
Pojfd
jop
ernk
aure
s
Possibilitie
Expanding
80
80
Ironk
ernk aure
Pojfdjop
me
ernk Chor
Pojfdjop
Expand
ing Po
ssibilit
ies
80
80
kheuhg
kheuhg
sfrfefg
sfrfefg
Ink ero
v
Ink ca Caps
rtridge
See the Troubleshooting Procedure for instructions on how to solve this problem.
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Media Problems
Printer
Options
Image Error
Other
Other Problems
Index
Getting Help
Color Accuracy
These are the areas you should review when troubleshooting a color accuracy problem:
Configuration
Check that you are using the correct driver setting for your software. Check which ink emulation mode has been
selected in the front panel; see Color Settings.
Media
Ensure the media loaded is genuine HP media and the correct media type selected on the front panel and in the
driver.
Related Topics
•
Color Consistency problems
•
Long Term Color Bleeding (Glossy Papers)
•
Color Accuracy Configuration
•
Additional Color Accuracy Information
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Media Problems
Printer
Options
Image Error
Other
Other Problems
Index
Getting Help
Color Consistency problems
•
Some media may discolor or change with age. Check that your media is fresh and has been stored correctly.
•
If the environmental conditions you are printing in change rapidly, you may see changes in the color consistency. By
reducing the time the print stays in extreme environmental conditions after being printed (especially very high
humidity) you can reduce the color consistency problems.
•
There may be color changes between images printed on your HP DesignJet 800 and other types HP DesignJet
printers. This is quite normal because the other printers use different ink.
Long Term Color Bleeding (Glossy Papers)
High ambient humidity at your location could cause the colors to bleed into the paper making the lines fuzzy and
bleary.
• Change the paper that you are printing with or remove the printer out the high humidity conditions.
Introduction
Media & Ink
Solving Problems
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Media Problems
Printer
Options
Image Error
Other
Other Problems
Index
Getting Help
Color Accuracy Configuration
The configurations of the printer defines how ink is applied to each type of media. Use the information in the
following table to configure your printer and software for best color accuracy.
Location of
Setting
Setting Description
Selection
Ink Menu
Color Calibration > Calibrate Paper
Set to match the media type loaded in the
printer. See Paper Types.
Ink Menu
Color settings > CMYK
Set the type of CMYK inks that your software
generates. If you use HP drivers use “Native”.
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Media Problems
Printer
Options
Image Error
Other
Other Problems
Index
Getting Help
Additional Color Accuracy Information
The means of accurately managing the colors printed by your printer vary with the software application and driver
being used. Refer to the following documentation:
• The Software Application Notes for your application, in the package shipped with your printer.
• On-line documentation in the drivers shipped with your printer.
• If you cannot find any reason for the discrepancy, before getting help, find out for which CMYK printer inks the colors
have been specified.
Additionally, remember that for your printer may be configured to use one of its internal pen palettes instead of
your software's palette (which is the default). See Pen Widths and Colors in the Internal Palettes.
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Printer
Options
Media Problems
Image Error
Other
Other Problems
Index
Getting Help
Ink Supply Problems
Most of the problems that you could encounter when working with the HP Ink Supplies are solved with guidance
from the front panel. The only acception to this is the Unknown Printhead Error. A full list of front messages are
supplied in Message Descriptions.
Printhead Problems after Replacement
If after replacing the printheads, the printer complains about wrong or missing printheads,, perform the following
steps:
• Check that you have removed the protective tape from the printhead.
• Insert the printhead into the carriage assembly but this time close the cover using the latch.
• Replace the printhead with a new one, see Printhead Replacement.
Problems Inserting the Ink Cartridge
1. Make sure that you have the correct HP Ink Supplies ink cartridge.
2. Make sure that the cartridge is the correct color for that slot.
3. Make sure the cartridge is in the correct orientation, with the color coded label at the top.
CAUTION: Never clean inside the ink cartridge slots.
Problems inserting the Printhead
1. Make sure that you have the correct HP Ink Supplies printhead.
2. Make sure that the printhead is the correct color for that slot.
3. Make sure that the printhead is the correct orientation.
See Printhead Replacement for further details.
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Media Problems
Printer
Options
Image Error
Other
Other Problems
Index
Getting Help
Unknown Printhead Error
An unknown printhead error occurs when the one of the printheads is causing a
problem but the system cannot detect which one it is. Whenever this happens the front
panel displays this error message. The number of printheads with unknown errors will
either be all the color printheads or all the printheads.
Use the following procedure to isolate the faulty printhead.
1. Select replace Printheads from the front panel.
2. Open the Carriage cover and remove ALL the Printheads.
3. Reinsert the Cyan Printhead only and close the Carriage cover and the Window.
4. Check the front panel - if the status of the Cyan Printhead is X or ? then the conclusion is that the Cyan Printhead is
faulty and must be replaced. If the status of the Cyan Printhead is OK the conclusion is that the Cyan Printhead is
working correctly. Repeat the process from step 1 for the other color Printheads to identify which one is failing.
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Printer
Options
Front Panel
Media Problems
Image Error
Other
Other Problems
Index
Getting Help
Media Problems
•
Media
Details the general rules to follow to avoid media problems.
•
Clearing a Media Jam
Describes how to clear a media jam.
•
Ink Marks on the Media
Details the way to solve ink mark problems; warped lines, blurred lines, marks or scratches on glossy paper.
•
Media Loading Problems
Explains what to do when the Front Panel keeps indicating that media is misaligned or incorrectly positioned.
•
Media Output Problems
Explains what to do when the prints fall on the floor or do not stack correctly in the media bin.
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Printer
Options
Front Panel
Media Problems
Image Error
Other
Other Problems
Index
Getting Help
Media
Always make sure that you are using the appropriate media for your image and that it is consistent with your
software application. To ensure color accuracy and print-quality performance of the printer, use only media types
that have been certified for your printer.
Use of non-HP media or HP media not certified for your printer may significantly reduce the color and print quality
of your images. For details of HP media, see Paper Types.
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Printer
Options
Front Panel
Media Problems
Image Error
Other
Other Problems
Clearing a Media Jam
If the front panel displays this message:
There is probably paper jammed in the printer. Paper jams can have various
causes:
•
The paper is too thick or too thin for the printer, or is otherwise not supported
•
The paper is creased or misaligned or is bubbled
•
Too much ink is being placed on the paper causing it to cockle or bubble
•
The end of the roll of paper is glued to the core and won’t advance further
•
Pieces of paper or paper powder are clogging up the cutter guide or other moving parts.
See Removing jammed paper for full instructions on how to clear jammed paper.
Index
Getting Help
Introduction
Media & Ink
Solving Problems
Solutions
Image Quality
Problems
Ink Supply
Problems
Printer
Options
Front Panel
Media Problems
Other
Image Error
Other Problems
Index
Getting Help
Removing jammed paper
1. Open the window.
2. Switch the printer off at the front.
3. If necessary, carefully move the printhead carriage out of the way—if possible all the way to the enclosed area on
the left or the right. Which way you are able to move it depends on where the paper is jammed.
CAUTION: When moving the printhead carriage, touch only the black plastic parts.
4. If necessary, carefully move the paper cutter out of the way to the left, or
to the right depending on where the paper is jammed (though if moved
right it may block the paper path).
CAUTION: The cutter is easily moved by holding it as close as possible
to the guide running across the width of the printer. Be
careful not to touch the metal slider bar that runs across the
printer.
Slider bar
Guide
5. If necessary, lift the blue paper lever, to release any trapped paper.
Remember to lower it again when you have finished.
6. Carefully remove any of the jammed paper which you can easily lift up and out from the top of the printer.
7. Carefully pull the rest of the roll or sheet down and out of the printer. You may need to cut the edge of the roll with
scissors.
8. Check that the printing zone, including the cutter guide, the paper path, and the area where the
printhead carriage is parked, is clear and clean; remove any paper powder by brushing it away
or with a vacuum cleaner.
More …
Introduction
Media & Ink
Solving Problems
Image Quality
Problems
Solutions
Ink Supply
Problems
Printer
Options
Front Panel
Media Problems
Image Error
Other
Other Problems
Index
Getting Help
Removing jammed paper (Continued)
CAUTION: The area where the printhead carriage is parked can get quite dirty; be careful not to get ink on your
hands.
9. Close the window and switch on the printer.
10. Wait for the printer to finish initializing.
11. Press the Form Feed and Cut key on the front panel to eject any small pieces of paper that are still in the paper
path.
12. Reload the paper as normal (see Loading Roll Media and Loading Sheet Media). If you are using roll paper you
may need to trim the edge first, to ensure that it is straight.
NOTE:
If there is still paper left in the paper path, try loading a sheet of stiff or rigid paper into the printer,
such as heavy coated or matte film; this will help to force out any paper jammed in the paper path.
13. If the cutter seems to be causing the problem, check in the User’s Reference Guide on the Using Your Printer CD
that the type of paper is supported by the printer. Try disabling the cutter from the front panel; use
Off.
→ Cutter →
You are strongly recommended to align the printheads (see Printhead Alignment) after clearing a paper jam, as the
problem may have caused the printheads to be misaligned.
Back …
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Printer
Options
Front Panel
Media Problems
Ink Marks on the Media
•
Warped Lines
•
Blurred Lines (Ink “Bleeds” from Lines)
•
Marks or scratches on glossy paper after printing
•
Smears or Scratching on Your Printed Media
Image Error
Other
Other Problems
Index
Getting Help
Introduction
Media & Ink
Solving Problems
Image Quality
Problems
Solutions
Ink Supply
Problems
Printer
Options
Front Panel
Media Problems
Image Error
Other
Other Problems
Index
Getting Help
Warped Lines
•
The media itself may be warped. This can happen if it has been used or not be stored in the environment conditions.
•
For all environmental specifications, see Enviromental Specifications.
Blurred Lines (Ink “Bleeds” from Lines)
•
Perhaps you have adjusted the drying time in the front-panel menu to speed up the printer output. Set “Drying time”
to “Automatic”.
For details of drying time adjustments, see Ink System.
Marks or scratches on glossy paper after printing
Glossy paper may be extremely sensitive to the bin or anything that it comes into contact with directly after
printing. This will depend on the amount of ink printed and the environmental conditions that are present at the
time of printing. Avoid any contact with the paper and handle the print with care until quite some time has elapsed.
NOTE:
Included with HP media is a book “Printer Tips” that includes a section on troubleshooting paper
problems.
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Printer
Options
Front Panel
Media Problems
Image Error
Other
Other Problems
Index
Getting Help
Smears or Scratching on Your Printed Media
This problem can appear on paper-based coated media if a lot of ink is printed quickly. The media cannot absorb
the ink quickly enough and becomes distorted. As the printheads move over the media, the printheads and the
media come into contact with each other and the printed image is smeared.
1. Press the Cancel key on the front panel; if you continue to print, the paper may damage the printheads.
2. Cancel the print job from your computer application.
3. In order to obtain better results perform the following:
•
Use HP recommended media. If the image you are printing has intense color, use HP Heavy Coated Paper.
•
Try to increase the print margins by relocating the image in the page from your software applications.
•
If you are using ‘Media Saving Options’ from the advanced section of the HP- GL/2 Driver, try disabling one or both
the options ‘Auto Rotate’ and ‘Inked Area’.
If the above fails to solve the problem of smears and scratching, change the media you are using to a non-paper based
media such as HP Clear film.
Introduction
Solving Problems
Media & Ink
Solutions
Image Quality
Problems
Ink Supply
Problems
Printer
Options
Front Panel
Media Problems
Image Error
Other
Other Problems
Index
Getting Help
Media Loading Problems
The Front Panel Keeps Indicating that media is misaligned or incorrectly positioned.
Roll media
• The roll media may be loaded the wrong way. The paper should load over the roll towards you, see Loading Roll
Media.
• The paper may be skewed. The right-hand edge must be parallel to the blue line on the front media deflector.
• Ensure that the paper is wrapped tightly on the roll.
• Check that the paper is correctly loaded onto the spindle, see Installing a New Roll on the Printer.
Sheet media
• The sheet media must be loaded with the right-hand edge against the blue line on the printer platen and the front
edge against the blue line just after the pinch rollers, see Loading Sheet Media.
• The media may be crumpled or warped or may have irregular edges.
• If you are using hand-cut media, the edges may not form a right-angle or they may be rough. Do not use hand-cut
media. Use only purchased sheet media.
• If the media is curled with the curl up it will be very difficult to load. It is easier to load it with the curl down
Introduction
Solving Problems
Media & Ink
Solutions
Image Quality
Problems
Ink Supply
Problems
Printer
Options
Front Panel
Media Problems
Image Error
Other
Other Problems
Index
Getting Help
Media Output Problems
Prints Fall on the Floor After Being Cut
•
Make sure the media bin is open.
•
Do not let more than twenty prints accumulate in the bin.
•
Make sure roll media is loaded correctly. If the paper is loaded incorrectly, the natural curl of the media may cause it
to miss the bin and fall to the floor.
Prints Do Not Stack Properly in the Media Bin
•
The printer may be too close to the end of the roll. The natural curl near the end of the roll can cause stacking problems. Load a new roll or remove prints manually as they are completed.
•
If you are mixing prints or nesting sets of several different sizes, you may have stacking problems because of the
different sizes of media in the bin.
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Media Problems
Printer
Options
Image Error
Other
Other Problems
Image Error
•
Image is Incomplete
Details the actions to take when the print is: Blank, Partial or has suffered clipping.
•
Printed Image Incorrect
Explains why the image is:
•
In one portion of the printing area
Unexpectedly rotated.
Mirrored.
Distorted or unintelligible.
Overlaid with another image.
Not affected by pen settings.
Does not obey page format and rotate commands.
Other Sources of Information
Lists others sources of information for image problems.
Index
Getting Help
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Image is Incomplete
•
Print is Completely Blank
•
Output Contains Only a Partial Print
•
Image is Clipped
•
Long-Axis Print Is Clipped
Front Panel
Media Problems
Printer
Options
Image Error
Other
Other Problems
Index
Getting Help
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Media Problems
Printer
Options
Image Error
Other
Other Problems
Index
Getting Help
Print is Completely Blank
If the front-panel Graphics language setting is Automatic (the default), try the other settings: (HP-GL/2 for an HP-GL/2
file, etc., and send the file again.
Output Contains Only a Partial Print
•
Did you press Cancel or Form Feed and Cut before all the data was received by the printer?
If so, you have ended the data transmission and will have to print the page again (you normally don't need to press
Form Feed and Cut to unload the print).
•
The I/O Setup > I/O Timeout setting may be too short. From the front-panel menu you can increase the
I/O Timeout setting to a longer period and then send the print again.
•
The file may be too large for the printer's memory.
You can install extra memory in your printer, see Memory.
•
There may be a communications problem between your computer and the printer.
Check your interface cable.
•
Check to make sure that your software settings are correct for your current page size (e.g., long-axis prints).
Introduction
Media & Ink
Solving Problems
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Media Problems
Printer
Options
Image Error
Other
Other Problems
Index
Getting Help
Image is Clipped
•
This normally indicates a discrepancy between the actual printing area on the loaded media and the printing area
as understood by your software. For general advice on printing areas and page size, see Printable Area.
•
Check the actual printing area for the media size you have loaded (printing area = media size minus margins). For
media size and margins, see Printable Area.
•
Check what your software understands to be the printing area (which it may call “printable area” or “imagable
area”). For example, some software applications assume standard printing areas that are larger than those used in
this printer.
•
Check that the orientation of the media is the same as that assumed by your software. The front-panel Paper >
Page format > Rotate option changes the orientation of a print and, on roll media, the orientation of the page. It is
possible that a rotated image on roll media may be slightly clipped in order to retain the correct page size, as
explained in Page Size.
•
You may have asked to rotate the page from portrait to landscape on media that is not wide enough, for example a
D/A1-size page rotated on a D/A1-size roll.
•
If necessary, change the printing area in your software.
•
The file may be too large for the printer’s memory.
Long-Axis Print Is Clipped
•
Does your software support long-axis prints?
•
Have you specified an appropriate media size in your software?
•
Make sure that the printer’s Page format > Size is set to Inked area.
•
There may not be sufficient memory.
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Media Problems
Printed Image Incorrect
•
Image is in One Portion of the Printing Area
•
Image is Unexpectedly Rotated
•
Print is a Mirror Image of the Original
•
Print is Distorted or Unintelligible
•
One Image Overlays Another on the Same Sheet
•
Pen Settings Seem to have No Effect
•
Page Format or Rotate does not Work
Printer
Options
Image Error
Other
Other Problems
Index
Getting Help
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Media Problems
Printer
Options
Image Error
Other
Other Problems
Index
Getting Help
Image is in One Portion of the Printing Area
•
Is the page size configured in the software too small?
•
Are you sure that your software doesn't believe the image to be in one quadrant of the page?
•
Otherwise, this indicates an incompatibility between the software and the printer:
•
Is your software configured for this printer? For general advice, see the Setup Poster. For advice specific to your
software, see either the documentation supplied with the driver.
•
If you still haven't found the solution, try changing the printer's Graphics Language setting on the front panel
(Setup > Graphic Language).
Image is Unexpectedly Rotated
•
Check the front-panel Paper > Page format > Rotate setting.
•
If Queueing and Nesting are both ON, pages may be automatically rotated to save media. See Rotating an Image
Print is a Mirror Image of the Original
•
Check the front-panel Paper > Page format > Mirror setting.
Introduction
Media & Ink
Solving Problems
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Media Problems
Printer
Options
Image Error
Other
Other Problems
Index
Getting Help
Print is Distorted or Unintelligible
•
The interface cable between your computer and the printer could be faulty. Try another cable to see if the problem is
corrected.
•
If you have connected your computer to the parallel port on the printer, make sure you are using a genuine HP parallel interface cable.
•
Depending on the software, drivers and RIPs you are using with your printer, there will be different solutions to solving this problem. Refer to the Vendor’s User Documentation for details.
One Image Overlays Another on the Same Sheet
•
The I/O Setup / I/O Timeout setting may be too long. From the front-panel menu decrease the setting and print
again.
Pen Settings Seem to have No Effect
•
Either: you have changed them in Pen settings / Define palette but forgotten to select that palette in Pen settings /
Palette,
•
Or: you expected the software-driven pen settings but in the front-panel Pen settings / Palette is not set to Software.
•
Or: you changed the setting in the front panel but this has been ignored by the printer because the driver setting has
not been changed.
Page Format or Rotate does not Work
•
The printer cannot rotate raster images. If your file contains raster data (typically, images with heavy area fill and
shading that you have scanned into your software) you will not be able to rotate the print.
•
Your driver does not allow this to happen.
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Media Problems
Printer
Options
Image Error
Other
Other Problems
Index
Getting Help
Other Sources of Information
If you don't find the solution to the problem here, other sources of help are:
• The documentation supplied with the driver that you are using to manage the output from your software application
to the printer.
For example, the on-line and printed documentation included in the following drivers supplied with your printer:
•
– AutoCAD™ windows drivers
– Windows drivers
The HP-GL/2 driver documentation supplied with your application software.
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Printer
Options
Media Problems
Image Error
Other
Other Problems
Index
Getting Help
Other Problems
•
Communication Problems
Describes typical problems you could encounter with communications between your computer and the printer.
•
Printer does not Print
Details common causes for the printer failing to print.
•
Printer Seems Too Slow
Lists the reasons why printing may slow down.
•
Printer Waits Too Long to Print a Nest
Explains the cause for the printer waiting too long to print a nest.
Introduction
Media & Ink
Solving Problems
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Media Problems
Printer
Options
Image Error
Other
Other Problems
Index
Getting Help
Communication Problems
Symptoms are:
•
The front-panel display does not show Processing when you are sending a print to the printer.
•
Your computer displays an error message when you are trying to print.
•
Your computer or printer “hangs” (stays idle) while communication is taking place. However, note that large prints
can take a correspondingly long time to print.
•
Your printed output shows random or inexplicable errors (misplaced lines, partial graphics etc.)
How to solve the problem:
•
Have you selected the correct printer in your software?
•
Does the printer work correctly when printing from other software?
•
If the printer is connected to a network, try using it when connected directly to your computer through parallel or
USB ports.
•
If your printer is connected to your computer through any other intermediate devices, such as switch boxes, buffer
boxes, cable adapters, cable converters etc., try using it when connected directly to your computer.
•
Try another interface cable. For details of supported cables, see Connection Specifications.
•
Make sure the graphic language setting is set to the correct setting, see Changing the Graphics Language.
File Size and Memory
There is no direct relationship between file size on your computer and memory used in the printer
to print that file. In fact, because of file compression (and general complexity) it is often impossible
to estimate how much memory will be used. This means that some large prints will work fine, but
some smaller prints may not and you will have to add more memory to your printer.
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Media Problems
Printer
Options
Image Error
Other
Other Problems
Index
Getting Help
Printer does not Print
•
You may have a power problem. If there is no activity at all from the printer, and power on indicator in the power
switch on the front of the printer is off, check that the power cable is connected correctly and that there is power
available at the socket.
•
You may have a problem with your application driver. Is your software configured for this printer? For general advice,
see the Setup Poster. For advice specific to your software, see the documentation supplied with the driver.
•
The file may be too large for the printer’s memory. This is the case if the front panel displays “Out of memory - data
was lost”. Look on your computer screen for any error message; some drivers allow you to choose a different printing mode and try to send the file again.
•
If you continue to have problems, see Getting Help.
Introduction
Solving Problems
Media & Ink
Solutions
Image Quality
Problems
Ink Supply
Problems
Front Panel
Media Problems
Printer
Options
Image Error
Other
Other Problems
Index
Getting Help
Printer Seems Too Slow
•
Did you specify Best print quality level on the front panel?
Best quality mode prints take longer to print.
•
Did you specify the right media type when loading the media? For details of front-panel media types, see Paper
Types. To find out the printer’s current media type setting, see Obtaining Roll or Sheet Paper Information.
•
The printhead may need replacing, see Printhead Replacement
•
Did you specify a Manual Dry Time in the front panel. Change the dry time to Automatic see Ink System.
•
If the printer is in Fast mode and the file it is printing contains high density inked areas the printer may need to slow
down to compensate.
Printer Waits Too Long to Print a Nest
Change the Nest wait setting. See How Long does the Printer Wait for Another File?
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Media Problems
Printer
Options
Image Error
Other
Other Problems
Getting Help
•
HP Customer Care
Details about the HP Customer Care program.
•
What to Do Before You Call
Information on what you should do before you contact your local HP Customer Care Center.
•
HP DesignJet Online
How to get help and much more via the World Wide Web.
Index
Getting Help
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Media Problems
Printer
Options
Image Error
Other
Other Problems
Index
Getting Help
HP Customer Care
As your strategic support partner, we make it our business to help keep your business running smoothly. HP
Customer Care offers award-winning support to ensure you get the most from your HP DesignJet.
The contact details for your local HP Customer Care Center are provided in the Hewlett Packard Customer Care booklet
supplied with your printer.
HP Customer Care provides comprehensive, proven support expertise and leverages new technologies to give
customers unique end-to-end support. Services include setup and installation, troubleshooting tools, warranty
upgrades, repair and exchange services, phone and Web support, software updates, and self-maintenance
services.
To find out more about HP Customer Care, please visit us at: www.hp.com/go/support.
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Media Problems
Printer
Options
Image Error
Other
Other Problems
Index
Getting Help
What to Do Before You Call
1. Review the troubleshooting suggestions in this section:
– In the relevant driver documentation supplied with this printer (for users sending PostScript files or those using
Microsoft Windows).
– If you have installed third party software drivers and RIPs refer to that user documentation.
2. If the problem appears to be related to your software application, first contact your software vendor.
3. If you still have difficulty, refer to the HP Support Services booklet shipped with this printer. This document contains
a comprehensive list of various support services available to help solve printer problems.
4. If you do call one of the Hewlett-Packard offices, please have the following information available to help us answer
your questions more quickly:
– The printer you are using (the product number and the serial number, found on the label at the back of the
printer).
– The computer you are using.
– Any special equipment or software you are using (for example, spoolers, networks, switch-boxes, modems, or
special software drivers).
– The cable you are using (by part number) and where you purchased it.
– The type of interface used on your printer (parallel, or network).
– The software name and version you are currently using.
– If the problem is a system error it will have a error number; record the error number and have it ready. See
Printer does not Print.
Introduction
Solving Problems
Media & Ink
Image Quality
Problems
Solutions
Ink Supply
Problems
Front Panel
Media Problems
Printer
Options
Image Error
Other
Other Problems
Index
Getting Help
HP DesignJet Online
Direct access to HP and the information you want, when you need it. Register now!
www.hp.com/go/designjet
HP DesignJet Online is a free, web-based “user club” exclusive to HP DesignJet users. Having registered, the
user has unrestricted access to a range of useful services, the emphasis being on “useful”, as this is definitely not
a sales-oriented site.
Communication from HP to users includes:
•
a quarterly newsletter focussing on usage tips, technical briefings and examples of HP DesignJet applications
around the world;
•
full information on worldwide HP Customer Care contacts;
•
an on-line HP DesignJet Diagnosis troubleshooting tool;
•
a calendar of HP DesignJet-related events and programs;
•
on-line access to training videos and selected user documents;
•
and immediate information on new products.
Communication from the users to HP includes:
•
feedback on HP DesignJet features;
•
automatic contact with HP Customer Care from the troubleshooting tool, for HP to follow up;
•
and the chance to ask technical questions on large-format printing to industry experts.
And finally, communication from user to user includes the chance to win prizes by submitting HP DesignJet
success stories, as well as a user-to-user discussion forum where users can share best
practices and ask for advice from their fellow professionals.
HP DesignJet Online is available in English, German, French, Italian, Spanish and
Portuguese.
Introduction
Media & Ink
The Front Panel
Solutions
Menu Structure
Front Panel
Printer
Options
Navigating the Menu System
Other
Index
Message Descriptions
Front Panel
The printer’s front panel is a user-friendly interface that gives you access to a comprehensive set of printer functions.
There is also information on your ink consumable items which is continually updated.
•
The Front Panel
•
Menu Structure
•
Navigating the Menu System
•
Message Descriptions
Introduction
Media & Ink
The Front Panel
Solutions
Front Panel
Menu Structure
Printer
Options
Other
Navigating the Menu System
Index
Message Descriptions
The Front Panel
The panel on the front of your printer is the principal way of changing the behavior of the printer, apart from any software
driven controls that may be provided through the application in use. The front panel of the printer contains the following
functional areas:
Display Screen
Navigation Keys
Action Keys
Introduction
Media & Ink
The Front Panel
Solutions
Front Panel
Menu Structure
Printer
Options
Other
Navigating the Menu System
Index
Message Descriptions
Navigation Keys
The display section of the front panel consists of an LCD display and the following five navigation keys:
The following navigation keys are provided to navigate through the menus displayed on the screen:
•
The Up
•
The Menu key takes you to the main screen. It cancels any choices that have not yet been selected by pressing the
Enter key.
•
The Back key takes you to the previous screen.
•
The Enter key selects the item in the menu list and makes it current. If there are sub-selections to be made, this key
takes you to them; otherwise it takes you back a screen.
and
Down keys let you scroll through the various items in a menu list.
.
Up
Down
Back
Menu
Enter
Introduction
Media & Ink
The Front Panel
Solutions
Menu Structure
Front Panel
Printer
Options
Other
Navigating the Menu System
Index
Message Descriptions
Display Screen
The display screen of the front panel shows the main menu (the words displayed may vary).
NOTE:
You can always reach the main menu by pressing the Menu key.
After a short time-out, the display will always revert to the main menu with the Job Management menu active.
Active menu
Paper Menu Icon
Ink Menu Icon
Job Management Menu Icon (Active)
Information
message
Navigation Example are given from the Job Management menu.
Error
Message
Setup Menu Icon
Introduction
Media & Ink
The Front Panel
Solutions
Menu Structure
Front Panel
Printer
Options
Other
Navigating the Menu System
Index
Message Descriptions
Action Keys
The Cancel key cancels the current printer operation (printing or preparing for printing). It will also cancel the current
menu selection and return to the main menu if a menu option is highlighted.
The Form Feed and Cut key causes a sheet to be ejected or the roll to be advanced and cut.
Cancel
Form Feed
and Cut Key
Introduction
Media & Ink
Solutions
The Front Panel
Menu Structure
Front Panel
Printer
Options
Navigating the Menu System
Other
Index
Message Descriptions
Menu Structure
The front panel display area screen shows the four classes of menu options available represented with specific icons.
Click on the icon to displays its menu structure.
•
Paper Menu
•
Ink Menu
•
Job Management Menu
•
Set-up Menu
Introduction
Media & Ink
The Front Panel
Solutions
Menu Structure
Front Panel
Printer
Options
Navigating the Menu System
Other
Index
Message Descriptions
Paper Menu
Click on menu item to go to relevant topic.
Load/Unload Roll
Paper
Load/Unload Sheet
Select paper type
Bright White Inkjet Paper
Cutter
ON/OFF
Page Format
Size
Advance Calibration
Plain Paper
Automatic
Vellum
Inked area
Natural Tracing Paper
ANSI
Best ANSI A…E
Translucent Bond
ISO
Best ISO …A0
Clear film
JIS
Best JIS …B1
Matte film
ARCH
Best ARCH …E1
Coated Paper
Oversize
Over A2, Over A1
Heavy Coated Paper
Extra
100cm x 140cm, …
Rotate
0, 90, 180, 270
Mirroring
On/off
High-Gloss Photo
Poster Paper
Canvas
Create pattern
Measure pattern
Restore factory
Menu item depends on the
type of media loaded
Only shown if media is loaded
Items always shown
Introduction
Media & Ink
The Front Panel
Solutions
Printer
Options
Front Panel
Menu Structure
Other
Navigating the Menu System
Index
Message Descriptions
Ink Menu
Click on menu item to go to relevant topic.
Ink
Information
Ink Cartridges
Ink Levels
Printheads
Cyan Printhead
Cyan Ink Cartridge
Color calibration
Status
Magenta Printhead
Magenta Ink Cartridge
Troubleshooting
Calibrate Paper
Yellow Printhead
Yellow Ink Cartridge
Reset
Black Printhead
Black Ink Cartridge
Align Print Heads
Standard (4.5 min.)
Replace Print Heads
Special (11 min.)
Replace Ink Cartridges
Color settings
Color/monochrome
RGB
Rendering Intent
Color
Native
Grayscale
sRGB
True Black
Perceptual
Saturation
Colorimetric
Drying time
Automatic
None
Manual
1, 2 … , 99 min.
Introduction
Media & Ink
The Front Panel
Solutions
Front Panel
Menu Structure
Printer
Options
Other
Navigating the Menu System
Job Management Menu
Click on menu item to go to relevant topic.
Job
Management
Queue/Copies
# Jobname (# Copies)
/ Queue is empty
Copies
1, 2, … , 99
Move to front
Cancel
Reprints
Delete
Queue
ON/OFF
Nest settings
Nest
ON/OFF
Wait time
1, 2, … , 99 min.
Menu items depend on the state of the job queue or on the
state of the currently selected job
0, 1, … , 99
Index
Message Descriptions
Introduction
Media & Ink
The Front Panel
Solutions
Menu Structure
Front Panel
Printer
Options
Other
Navigating the Menu System
Index
Message Descriptions
Set-up Menu
Click on menu item to go to relevant topic.
Help
Print quality
Advanced Options
Best
Optimize for
Best Quality Settings
Line drawings / text
Normal
Images
Fast
Default
Maximum detail
Fast Quality Settings
Default
Reduced speed
Printer Information
Model number, Serial number, Service ID,
Firmware rev, Accessory rev, Paper used,
Ink used (c, m, y, k), Scan axis usage,
Paper axis usage, Service station usage,
Spittoon usage, Pinch-lift usage, Cutter
usage, Ink usage.
View
Print
Graphic Language
Automatic
HPGL/2
CALS/G4
HPGL/2 settings
More menu options
Palette
Software, Factory, Palette A, B
Define Palette
Palette A, Palette B
Pen no. 0 … 15
Width
0.13 ... 12.0mm
Factory
Pen no. 0 … 15
Width
0.13 ... 12.0mm
Merge
On/Off
Introduction
Media & Ink
Solutions
The Front Panel
Menu Structure
Front Panel
Printer
Options
Other
Navigating the Menu System
Index
Message Descriptions
Set-up Menu continued
Click on menu item to go to relevant topic.
Previous menu options
I/O setup
Card ID
No I/O Cards present / Contents provided by card
Card setup
No I/O Cards present
Configuration
Advanced
I/O Timeout
Front Panel
Log
Service tools
30 sec, … , 30 min
Language
Buzzer
ON/OFF
Contrast
0%, 5%, … , 100%
Altitude
Reset Card
English, German, Spanish, French, Italian,
Japenese, Portuguese, Korean, Chinese,
Taiwanese, …
0-1000m
Printheads
1000m - 2000m
Errors
>2000m
Service tests
Service calibrations
Service utilities
Items always shown
Hidden items that can only be accessed
from the Set-up menu through a
certain combination of keys
Introduction
Media & Ink
The Front Panel
Solutions
Front Panel
Menu Structure
Printer
Options
Navigating the Menu System
Other
Index
Message Descriptions
Navigating the Menu System
From the top level of the menu system, you can navigate through the menus using the display keys. Any menu item
followed by a greater than symbol (>), indicates that a further level of menu items is available.
Press Menu to return to the top level
Press Back to return to the previous menu
without changing any menu selections.
level without changing any menu selections.
This will bring you to the four menu icons.
Press the Up
and Down
keys to scroll
up and down though the menus or menu
options.
Press Enter to:
•
Select a menu and move to the next menu level.
•
Change the value of the selected menu item.
See Navigation Example for a brief overview of the menu system.
Introduction
Media & Ink
Solutions
The Front Panel
Front Panel
Menu Structure
Printer
Options
Navigating the Menu System
Other
Index
Message Descriptions
Navigation Example
This section provides a typical example of how to navigate through the menus to configure a specific print option.
How to set the ink-drying time to three minutes
The Front Panel Menu Structure diagram for the Ink Menu shows that the path to the Drying time option is:
Ink menu
→ Drying time
Use the following procedure to set the ink-drying time to three minutes.
Setting Drying Time Navigation Example
Key Action
1. Use the Up
and
Down
keys to highlight the Ink menu icon.
2. Press the Enter key to
enter the printer Ink
menu.
Display
Result
The Ink menu icon is
highlighted to allow you to
select the Ink menu options.
The display shows the Ink
menu to allow you to select
Drying Time.
Continued …
Introduction
Media & Ink
Solutions
The Front Panel
Menu Structure
Front Panel
Printer
Options
Navigating the Menu System
Other
Index
Message Descriptions
Setting Drying Time Navigation Example (Continued)
Key Action
3. Use the Up
and
Down
keys to
highlight the Drying
time menu option.
Display
Result
The display shows the Drying
time option highlighted.
4. Press the Enter key to
enter the Drying time
menu.
The display shows the Drying
time menu to allow you to
select the type of drying time
you require.
5. Use the Up
The display
shows
the
Manual option highlighted.
and
Down
keys to
highlight the Manual
menu option.
Previous …
Continued …
Introduction
Media & Ink
Solutions
The Front Panel
Menu Structure
Front Panel
Printer
Options
Navigating the Menu System
Other
Index
Message Descriptions
Setting Drying Time Navigation Example (Continued)
Key Action
Display
Result
6. Press the Enter key to
enter the Manual drying
time setting menu.
The display
shows
the
Manual drying time setting
menu to allow you to select
the drying time you require.
7. Press the Up
key
once to select two
minutes.
The display
shows
the
Manual drying time setting
menu with two minutes
selected.
8. Press the Enter key to
set the drying time to two
minutes.
If the front-panel Buzzer is set
ON, there will be a short
‘beep’ to confirm the change.
A tick mark () in the right side
of the field confirms the value.
Previous …
Continued …
Introduction
Media & Ink
Solutions
The Front Panel
Menu Structure
Front Panel
Printer
Options
Navigating the Menu System
Other
Index
Message Descriptions
Setting Drying Time Navigation Example (Continued)
Key Action
9. Press the Top key to
return to the top level
menu.
Previous …
Display
Result
The display shows the Ink
menu.
Introduction
Media & Ink
Solutions
The Front Panel
Front Panel
Menu Structure
Printer
Options
Navigating the Menu System
Other
Index
Message Descriptions
Message Descriptions
This is a list of the error messages in the front-panel display. If an action is needed, it is shown in italics in the
Explanation and Action column. The messages are listed in alphabetical order. Other front-panel messages, such as
prompts, are included in the descriptions of the relevant procedures elsewhere in this document.
Front Panel Messages
Message
Explanation and Action
Alignment error due to
printheads.
Press ENTER to see faulty
printheads
The printer was aligning its printheads, but encountered an error
due to some printheads not printing properly. Alignment has
stopped.
Press the Enter key.
Alignment error
Press ENTER to continue
The printer was aligning its printheads, but encountered an error.
Alignment has stopped.
Press the Enter key.
Cartridges will expire in days:
nn
One or more of the cartridges are about to expire. nn is the number
of days until expiry date of the cartridge that will expire first. The
cartridges that are about to expire are indicated below this message.
For an explanation of the replacement procedure, see Ink Cartridge
Replacement.
Color calibration error
Press ENTER to continue
The printer was performing a calibration of its color system, but
encountered an error.
Press the Enter key.
For more Messages, click on the Next Page button
Introduction
Media & Ink
Solutions
The Front Panel
Menu Structure
Front Panel
Printer
Options
Navigating the Menu System
Other
Index
Message Descriptions
Front Panel Messages (Continued)
Message
Explanation and Action
Error
Select Replace Printheads
The printer has detected that one or more of the printheads is
missing or has an error, as indicated by flashing crosses. The four
icons refer from left to right to the Cyan (•), Black (•), Magenta (•)
and Yellow (•) printheads.
For an explanation of the replacement procedure, see
Printhead Replacement.
HP is not responsible for
damage from use of non-HP
ink.
Replace
Continue
The printer has determined that one or more of the ink cartridges is
not an HP product. Your product warranty only applies when you use
HP ink. Any damage caused to your printer resulting from the use of
non-HP ink cartridges is not the responsibility of Hewlett-Packard.
If you want to replace the non-HP ink cartridges, select Replace and
press the Enter key. Otherwise, select Continue and press Enter to
continue.
HP is not responsible for
damage from use of non-HP
printheads.
Replace
Continue
The printer has determined that one or more of the printheads is not
an HP product. Your product warranty only applies when you use HP
printheads. Any damage caused to your printer resulting from the
use of non-HP printheads is not the responsibility of HewlettPackard.
If you want to replace the non-HP printheads, select Replace and
press the Enter key. Otherwise, select Continue and press Enter to
continue.
For more Messages, click on the Next Page button
Introduction
Media & Ink
Solutions
The Front Panel
Menu Structure
Front Panel
Printer
Options
Navigating the Menu System
Other
Index
Message Descriptions
Front Panel Messages (Continued)
Message
Explanation and Action
Ink cartridge replacement
required
The printer has detected that one or more of the ink cartridges is
missing or has an error, as indicated by flashing crosses. The four
icons refer from left to right to the Cyan (•), Black (•), Magenta (•)
and Yellow (•) cartridges.
For an explanation of the icons and details of the replacement
procedure, see Ink Cartridges.
INK CARTRIDGES need to be
functional.
Replace before replacing
printheads
You have attempted to replace printheads, but the printer has
detected that there are ink cartridges that are wrong. The ink
cartridges must be replaced before the printheads can be replaced.
First replace the faulty, empty or missing ink cartridges and then
replace the printheads. See Ink Cartridge Replacement and
Printhead Replacement.
Install missing cartridges and
replace empty cartridges
before replacing printheads
You are replacing printheads, but the printer has detected that some
cartridges are empty and some are missing. The empty cartridges
must be replaced and the missing ones inserted before the
printheads are replaced.
Follow the procedure for Ink Cartridge Replacement. Press the Enter
or Cancel key to continue.
For more Messages, click on the Next Page button
Introduction
Media & Ink
Solutions
The Front Panel
Menu Structure
Front Panel
Printer
Options
Navigating the Menu System
Other
Index
Message Descriptions
Front Panel Messages (Continued)
Message
Install missing cartridges
before replacing printheads
Explanation and Action
You are replacing printheads, but the printer has detected that one
or more cartridges are missing. The missing cartridges must be
installed before the printheads are replaced.
Follow the procedure for Printhead Replacement. Press the Enter or
Cancel key to continue.
Open window and check
printhead cover is properly
closed
You have replaced one or more printheads and the printer’s check
has found that the printhead cover is not securely closed.
Open the window and check the printhead cover. The procedure is
described in the Printhead Replacement procedure.
Note: This message may also appear following a paper jam, as the
printer cannot detect the exact reason for the problem. In this case
you may have to resort to powering off the printer or even removing
the power cable from the machine, in order to recover from the
problem. See Clearing a Media Jam.
Open window and check
proper installation of setup
printheads
During system start-up, which occurs when you first install the
printer, you need to install the setup printheads. These special
printheads cannot be used for printing, but must be used when the
printer has been powered off. The printer has detected that the
setup printheads have not been installed correctly.
Open the window and follow subsequent instructions to reinstall or
relocate the setup printheads. Contact HP for advice if the setup
printheads are missing or cannot be installed correctly.
For more Messages, click on the Next Page button
Introduction
Media & Ink
The Front Panel
Solutions
Menu Structure
Front Panel
Printer
Options
Navigating the Menu System
Other
Index
Message Descriptions
Front Panel Messages (Continued)
Message
Explanation and Action
Option not available now
You have selected an option in the menu that is not available at the
moment. (The printer may be busy, out of ink, out of paper, etc.)
Out of paper
The printer ran out of paper while printing the calibration pattern.
Load a sheet or roll that is at least 65 cm (25 inches) long and 50 cm
(20 inches) wide.
Paper advance calibration is
recommended.
Press ENTER to calibrate
You are recommended to perform the Advance calibration routine, to
ensure the optimum print quality.
Press the Enter key to create the calibration pattern. See Advance
Calibration.
Paper advance calibration is
recommended. Load paper
and select Paper advance
calibration.
Press ENTER to finish
You are recommended to perform the Advance calibration routine, to
ensure the optimum print quality.
Load a sheet or roll of paper and then select Advance calibration
from the Paper menu. See Advance Calibration.
Paper loaded with too much
skew
Press ENTER to retry
Press CANCEL to abort
During the loading of paper, the printer has detected that the paper
is skewed too much, that is, it has not been loaded straight enough.
(‘Skew’ is the angle between the actual paper edge and the correct
line.)
Either: Press the Enter key to restart the loading procedure;
Or: Press the Cancel key to cancel paper loading.
For more Messages, click on the Next Page button
Introduction
Media & Ink
The Front Panel
Solutions
Menu Structure
Front Panel
Printer
Options
Navigating the Menu System
Other
Index
Message Descriptions
Front Panel Messages (Continued)
Message
Explanation and Action
Paper mispositioned
The paper is not properly positioned in the printer. Either it is out of
the load line margins or it has moved too much from its previous
position.
Reload the paper following the normal procedure, to solve this
problem. See Loading Roll Media and Loading Sheet Media.
Paper not found
Press ENTER to retry
Press CANCEL to abort
During the loading of paper, the printer has detected that no paper
has been loaded.
Either: Press the Enter key to restart the loading procedure;
Or: Press the Cancel key to cancel paper loading.
Paper not present.
Load paper to print calibration
pattern
The paper axis calibration routine has been triggered with out
having paper loaded.
Load paper; see Advance Calibration for details of the routine.
Paper too big to scan the
pattern after printing it
During the paper loading for the Calibration routine, the printer has
detected that the it will not be able to load the later when it will be
needed for scanning. The minimum size required for the print is
65 cm (25 inches) long and 50 cm (20 inches) wide.
Load a smaller sheet that satisfies this minimum requirement.
For more Messages, click on the Next Page button
Introduction
Media & Ink
Solutions
The Front Panel
Menu Structure
Front Panel
Printer
Options
Navigating the Menu System
Other
Index
Message Descriptions
Front Panel Messages (Continued)
Message
Explanation and Action
Paper too big
Press ENTER to retry
Press CANCEL to abort
While loading paper into the printer (roll or sheet), the printer has
found that it is either too wide or too long (only for sheet) to be
loaded properly.
Press the Enter key to load smaller paper, or the Cancel key to stop
the load.
Paper too small for a
diagnostic print
The Troubleshooting utility has found that the single sheet loaded in
the printer is too small for a Diagnostic Print.
Load a roll of paper, or a sheet that is A3-size or larger.
Paper too small
to align printheads
Load bigger size to
align
Press ENTER to continue
The paper loaded is not big enough to contain the alignment pattern.
Unload the paper (select Unload roll or Unload sheet from the
Paper menu) and then load paper that is large enough—at least A4/
Letter-size in landscape mode for Standard alignment, or A3/B size
in landscape mode for Special alignment.
Paper too small to print the
pattern
The paper loaded is not big enough to contain the paper axis
calibration pattern.
Load a roll or sheet that is at least 65 cm (25 inches) long and 50 cm
(20 inches) wide.
For more Messages, click on the Next Page button
Introduction
Media & Ink
Solutions
The Front Panel
Menu Structure
Front Panel
Printer
Options
Navigating the Menu System
Other
Index
Message Descriptions
Front Panel Messages (Continued)
Message
Explanation and Action
Paper too small
Press ENTER to retry
Press CANCEL to abort
While loading paper into the printer (roll or sheet), the printer has
found that it is either too narrow or too short (only for sheet) to be
loaded properly.
Press the Enter key to load larger paper, or the Cancel key to stop
the load process.
Paper type not valid
to align printheads
Change paper type to
align
Press ENTER to continue
You have requested the printer to align paper but it has detected that
the paper loaded is not the right type to use to align the printheads.
The paper loaded is not big enough to contain the alignment pattern.
Unload the paper (select Unload roll or Unload sheet from the
Paper menu) and then load paper that is the right type for the
alignment. See Printhead Alignment.
Pattern not found
Reload it again, please
The printer is trying to perform a scan of the calibration pattern, but
the pattern was not found.
Reload the sheet that was printed by the Create pattern part of the
calibration routine.
Possibly a paper jam
1. Open window
2. Switch power off
3. Clear paper path
4. Switch power on
5. Align printheads
There may be paper jammed in the printer. (The printer has
detected that a motor is blocked and the likely cause is a paper jam;
however, it may be due to some other cause.)
Follow these steps to check the paper path, as described in Clearing
a Media Jam. When the jammed paper has been cleared, you are
strongly recommended to align the printheads, as they are quite
likely to have become misaligned as a result of the paper jam.
For more Messages, click on the Next Page button
Introduction
Media & Ink
Solutions
The Front Panel
Menu Structure
Front Panel
Printer
Options
Navigating the Menu System
Other
Index
Message Descriptions
Front Panel Messages (Continued)
Message
Explanation and Action
Printhead replacement not
available now. Cancel print
jobs before replacement
You have requested the printer to replace one or more printheads,
but the printer is busy printing a job and cannot honor the request
now.
Either: press the Cancel key to cancel the job that is currently
printing, and then again select Replace Printheads (from the Ink
system menu).
Or: wait until the job has finished printing (and there are no more
jobs in the print queue), and then again select Replace Printheads
(from the Ink system menu).
Printhead warning
Poor print quality
A problem has occurred with one or more printheads. The
printheads are still functional. The problem was detected either
during printhead alignment or during troubleshooting. If you have
completed the routine, the system was unable to clean the
printheads fully.
You should use the Troubleshooting Procedure to correct any image
quality problems that may be apparent; alternatively, you should
replace the printheads (see Printhead Replacement).
Printheads not aligned
Paper type not valid
to align printheads
Press ENTER to continue
You have replaced one or more printheads but the printer has
detected that you do not have the right type of paper loaded for the
alignment process.
Press the Enter key to load the correct type of paper, or the Cancel
key to stop the load process.
For more Messages, click on the Next Page button
Introduction
Media & Ink
Solutions
The Front Panel
Menu Structure
Front Panel
Printer
Options
Navigating the Menu System
Other
Index
Message Descriptions
Front Panel Messages (Continued)
Message
Explanation and Action
Printheads not aligned
Paper too small
to align printheads
Press ENTER to continue
You have replaced one or more printheads but the printer has
detected that you do not have wide enough paper loaded for the
alignment process.
Press the Enter key to load larger paper, or the Cancel key to stop
the load process.
PRINTHEADS not functional
Replace printheads
Cancel print
The printer is attempting to print a job, but finds that there is a
problem with the printheads. You may either replace the printheads
at this stage or cancel the print.
Select the required option and press the Enter key. If you decide to
replace them, you will be told which ones are failing or missing.
Printheads require alignment.
Load paper and select Align
printheads.
Press ENTER to finish
The printer has detected that the printheads need to be aligned.
Press the Enter key to continue. Load a sheet or roll of paper, and
select Align printheads from the Ink menu. See Printhead
Alignment.
Printheads require alignment.
Press ENTER to align
The printer has detected that the printheads need to be aligned.
Press the Enter key to align them. See Printhead Alignment.
Problem found during
calibration
A general problem was found during the Advance Calibration
routine.
Respond to any other messages that appear on the front panel,
indicating ink or paper problems, and then retry the Advance
calibration routine.
For more Messages, click on the Next Page button
Introduction
Media & Ink
The Front Panel
Solutions
Menu Structure
Front Panel
Printer
Options
Navigating the Menu System
Other
Index
Message Descriptions
Front Panel Messages (Continued)
Message
Explanation and Action
Problems detected in INK
CARTRIDGES.
Continue process and replace
them.
Press ENTER to continue
There is an error with the ink cartridges during the preparation of the
ink system.
Press the Enter key and then follow the instructions to replace the
faulty ink cartridges.
Reload paper
There is an error in the paper, as shown in another message.
Use the normal procedure to reload the paper.
Replace empty cartridges
before replacing printheads
You have requested the printer to permit the replacement of
printheads, but the printer has detected that one or more cartridges
are empty. The empty cartridges must be replaced before the
printheads are replaced.
Press the Enter key and follow the procedure for replacing empty
cartridges, described in Ink Cartridge Replacement.
Right edge of roll too far from
load line
Press ENTER to retry
Press CANCEL to abort
The paper is out of the load line margins—too far from the line
where it should be loaded.
Either: Press the Enter key to restart the loading procedure;
Or: Press the Cancel key to cancel paper loading.
For more Messages, click on the Next Page button
Introduction
Media & Ink
Solutions
The Front Panel
Menu Structure
Front Panel
Printer
Options
Navigating the Menu System
Other
Index
Message Descriptions
Front Panel Messages (Continued)
Message
Explanation and Action
Right edge of sheet too far
from load line
Press ENTER to retry
Press CANCEL to abort
During the loading of a sheet of paper, the printer has detected that
the paper is too far to the left; it should be aligned close to the blue
line painted on the right side of the platen.
Either: Press the Enter key to restart the loading procedure;
Or: Press the Cancel key to cancel paper loading.
Roll edge not found
Please check roll edges are
non-clear
Press ENTER to retry
Press CANCEL to abort
During the loading of a roll, the printer cannot detect the side edge
of the paper. A possible cause is that the media is transparent
(clear); only non-clear media are supported.
Either: Press the Enter key to restart the loading procedure;
Or: Press the Cancel key to cancel paper loading.
Roll right edge too far from
load line
Press ENTER to retry
Press CANCEL to abort
During the loading of a roll of paper, the printer has detected that the
paper is too far to the left; it should be aligned with the blue line
painted on the right side of the platen.
Either: Press the Enter key to restart the loading procedure;
Or: Press the Cancel key to cancel paper loading.
Sheet edge not found
Please check sheet edges are
non-clear
Press ENTER to retry
Press CANCEL to abort
During the loading of a sheet, the printer cannot detect the side
edge of the paper. A possible cause is that the media is transparent
(clear); only non-clear media are supported.
Either: Press the Enter key to restart the loading procedure;
Or: Press the Cancel key to cancel paper loading.
For more Messages, click on the Next Page button
Introduction
Media & Ink
Solutions
The Front Panel
Menu Structure
Front Panel
Printer
Options
Navigating the Menu System
Other
Index
Message Descriptions
Front Panel Messages (Continued)
Message
Explanation and Action
Sheet not loaded
Load sheet with printed
pattern
The printer is trying to perform a scan of the calibration pattern, but
no sheet was found.
Load the sheet that was printed by the Create pattern part of the
calibration routine.
Sheet too long
Please check it is not a roll
Press ENTER to retry
Press CANCEL to abort
You have requested the printer to load a sheet of paper, but the
sheet appears to be too long.
Check that the paper is not a roll.
Either: Press the Enter key to try to load the sheet again;
Or: Press the Cancel key to stop the process. If the paper is on a
roll, follow the instructions in Loading Roll Media.
Troubleshooting finished
Resume normal printing
If problem persists select
Troubleshooting again
Press ENTER to continue
The printer has finished the Troubleshooting routine and will not at
this stage perform further cleaning on the printheads because this
could damage the other ones. However, according to the evaluation
you have given, the printheads require cleaning because there are
defects in the Diagnostic Print.
Press the Enter key. Then resume your normal printing activities. If
the problem recurs, try using the Troubleshooting routine again, or
select Replace Printheads from the front panel (in the Ink System
menu) to replace the printheads that are faulty.
Troubleshooting requires
paper for a diagnostic print.
The Troubleshooting utility has found that there is no paper loaded in
the printer.
Load a roll of paper.
For more Messages, click on the Next Page button
Introduction
Media & Ink
Solutions
The Front Panel
Menu Structure
Front Panel
Printer
Options
Navigating the Menu System
Other
Index
Message Descriptions
Front Panel Messages (Continued)
Message
Explanation and Action
Unable to initialize ink system.
Call HP representative.
The system cannot successfully complete the startup.
Call HP for service.
Unable to prepare ink system.
Open window to check
SETUP printheads
During ink system start-up, the purge of the ink system has failed
and the system is asking you if the preparation has completed.
Check the setup printheads and then follow the instructions in the
front panel and respond to further questions.
Unknown ink cartridges.
Press ENTER to continue.
The ink cartridges are not recognized by the printer as ink cartridges
approved by HP, and there is at least one that is new.
Press the Enter key.
Unknown paper format
Reload paper
The format (roll or sheet) of the paper loaded in the printer is
unknown.
Reload the paper following the normal procedure, to solve this
problem. See Loading Roll Media or Loading Sheet Media.
Unknown paper type
Select paper type
The type of the paper loaded in the printer is unknown to the printer.
Select a known paper type from the printer menu.
Unknown printheads.
Press ENTER to continue.
The printheads are not recognized by the printer as printheads
approved by HP, though the printer can still use them.
Press the Enter key.
For more Messages, click on the Next Page button
Introduction
Media & Ink
The Front Panel
Solutions
Menu Structure
Front Panel
Printer
Options
Navigating the Menu System
Other
Index
Message Descriptions
Front Panel Messages (Continued)
Message
Explanation and Action
Warning!
Machine calibrations need to
be performed. Refer to guide
for instructions.
The color calibrations for the paper that is loaded have been lost.
Follow the procedure described in Advance Calibration.
Warning: color calibration not
done on this paper type
The printer has detected that the color calibrations have not been
performed on this paper type, and the system is configured to do
them.
To calibrate color for the current paper type, select Ink menu →
Color calibration → Calibrate paper.
Warning: printheads not
aligned
The printer has detected that the printheads have not been aligned
since the last replacement.
You should align the printheads by selecting Align printheads from
the Ink menu.
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Printer
Options
Image Appearance
Other
Print Management
Index
Printer Configuration
Printer Options
The printer has many options that you can use to ensure that the image you print has the look and appearance you
want. You can select printer settings either from the front panel or from the driver you have for the printer. In most cases
the driver settings override the front panel settings.
The Print Options Tab contains these topics:
•
Page Format deals with the formatting of the image and how to use the settings to obtain the formatting that you
want. It also explains how to control the orientation of the image on the media.
•
Setting Page Size in the Front Panel explains how to set the page size from the front panel.
•
Image Appearance describes how to control the overall appearance of your prints.
•
Print Management describes how to efficiently manage your printing.
•
Printer Configuration details how to set specific configuration parameters of your printer.
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Page Format
•
Page description explains how to make sure the you obtain the prints from your printer in the format you want.
•
Rotating an Image details on how to rotate the image.
•
Printing a Mirror Image explains how to print a mirror image of your print.
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Printer
Options
Front Panel
Image Appearance
Other
Print Management
Index
Printer Configuration
Page description
This section explains how to make sure that the printer produces your print in the page format you want.
Leading Edge
Margins
17 mm
(0.7 in)
Page Size
5 mm
(0.2 in)
Direction of paper
leaving the printer
Printing Area
17 mm
(0.7 in)
Inked Area
5 mm
(0.2 in)
Trailing Edge
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Page Size
Page size can be specified from the front panel or in the software, where it may be called “Page Size”, “Media Size”,
“Paper Size”, etc., and where the options include, for example, ISO A3, ANSI Letter, Custom. If your software does not
define the page size in the print file, the front-panel setting is used. Otherwise, the software setting overrides the frontpanel setting.
Margins
The margins are set to ensure the maximum printable area on your paper. The two side margins are 5.0 mm. The
margin settings for the leading and trailing edges are 17 mm.
Printing Area
The printing area is the page size minus the margins. For a table showing the printing areas for standard paper sizes,
see Printable Area.
Inked Area
inked area is the smallest rectangle that contains the entire image.
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Rotating an Image
These topics detail all aspects of job rotation:
•
Job Rotation (HP-GL/2)
•
Page Size and the Rotation
•
What is Rotated?
Job Rotation (HP-GL/2)
If the software in the driver does not specify the rotation setting, it can be specified in the front panel
(Paper > Page Format > Rotate).
Page Size and the Rotation
Note that when you rotate a job the page size is enlarged to avoid clipping, because the trailing and leading margins are
not the same size as the side margins.
When rotating, the page size is enlarged across the paper direction to ensure that the drawing is not clipped.
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Printer
Options
Front Panel
Image Appearance
Other
Print Management
Index
Printer Configuration
What is Rotated?
With roll paper, both the image and the page orientation are rotated.
A
90º
A
0º
A
A
Notice that the narrow margins are always at the left and right sides, regardless of the orientation. The page size is
adjusted to maintain the printing area, preventing clipping.
With sheet paper, the image is rotated, but the page orientation specified in your software is retained. (You should
always load sheet paper in the orientation you have specified in the software.)
90º
0º
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Printing a Mirror Image
If you are using clear imaging paper, sometimes called backlit, you may want to print a mirror image of your print, so that
when the paper is lit from behind it is in the correct orientation. This can be done from the front panel, without changing
the image in your software.
Mirror Off
Mirror On
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Setting Page Size in the Front Panel
•
Adjusting the Page Size in the Front Panel
Details how and why you would adjust the Page Size from the Front Panel.
•
Page Size
Describes the various methods of controlling the page size.
•
Page Size and Clipped Images
Explains what happens if you choose a larger page size than the current media loaded in your printer.
•
Page Size and Nesting (Roll Paper Only)
Explains how the Page Size effects Queueing and Nesting
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Adjusting the Page Size in the Front Panel
You do not normally need to adjust the page size through the front panel, because the page size you have selected in
your HP driver overrides the page size selected in the printer. However, some of the circumstances in which you may
want to change the default setting are:
•
When you want to save paper by printing only the inked area of your print, plus the margins. In this case set Page
Format → Size → Inked area.
Depending on the driver you are using, you may not need to change the page size in the front panel. The default Size
setting (Software) in the Page Format menu causes the printer to look for the page size information in the print file: if it
is there, the printer uses it.
However, some of the circumstances in which you may want to change the default setting are:
• If you want to print the inked area only, but the driver you are using does not specify “Inked Area”.
In this case, set the Size setting in the Page Format menu to Inked area.
If you can select Inked area from your driver, any selection you have made in the front-panel menu will be overridden by
the settings in the driver.
•
When the prints you are creating need to be of a specific standard (for example, ISO or ANSI), but the actual size
within that standard is not important. For example, your page size may need to conform to a standard ISO page
size, but it does not matter whether the final page size is ISO A4 or ISO A3.
In this case, set Page Format → Size to ISO –> Best... or ANSI –> Best... etc. The printer uses the smallest standard
size into which the inked area will fit.
Introduction
Media & Ink
Page Format
Solutions
Setting Page Size in the
Front Panel
Front Panel
Printer
Options
Image Appearance
Other
Print Management
Index
Printer Configuration
Page Size
The Page Size option lets you select the page size of your print. The options are described in the following table. If you
need to adjust the page size from the front panel, do so before sending the file from your computer. The printer
determines the size of a print at the time it is received from your application.
NOTE:
Settings will be overridden by your driver or application.
Page format
Available Sizes
Inked Area
The printed page size is the Inked Area plus margins.
Automatic
The printer looks to the print you have sent for a page size instruction. If
it is present the printer uses this. If not, the printed page size is the
inked area plus margins.
ISO
Besta ISO A, ISO A0/A1/A2/A3/A4
ANSI
Besta ANSI, ANSI E/D/C/B/A
JIS
Besta JIS B, JIS B1/B2/B3/B4
ARCH
Besta ARCH, ARCH E1/E/D/C/B/A
Oversize
Over A1/A2
Extra
100 cm x 140 cm, 42 in x 59 in
The printed page size is exactly
the size you specify. The largest
discrete page size you can specify
is E/A0
a. The printer chooses the smallest page size from the corresponding discrete options that will
hold the inked area of the print. For example, if Best ISO A is selected and the inked area of the
print is between A3 and A4,the printer chooses A3 as the page size.
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Page Size and Clipped Images
If you specify in your software a page size that is larger than the paper size loaded in the printer, the printer will still print
what it can, but may clip your image.
A2 paper in printer
Clipped
Area
A1 page size in software or front panel
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Page Size and Nesting (Roll Paper Only)
Nesting means placing two or more pages side-by-side on a roll to save paper. There are certain cases when your
prints can not be nested. For a complete explanation of nesting, see page Nesting Pages.
If you have queueing and nesting switched on, the printer will use the page size to determine which pages are nested
and whether the pages can be automatically rotated when nesting. See page When Does the Printer Try to Nest
Pages?, for information about which pages can be automatically rotated.
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Image Appearance
These topics explain how you can control the overall appearance of your prints.
•
Front Panel Image Options
explains how to change the HP-GL/2 color palettes.
•
Printing Images in Grayscale
describes how to print color images in grayscale.
•
Print Speeds and Print Quality
lists typical printing times by output quality.
•
Print Quality
describes the different print modes that are available with your printer.
•
Advanced Options
describes the various optimization and quality enhancement methods available.
Index
Printer Configuration
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Front Panel Image Options
These topics deal with the ways you can control the overall appearance of your prints from the front panel in terms of:
•
Pen Widths and Colors in the Internal Palettes
•
Changing the Treatment of Overlapping Lines (Merge)
Some front-panel selections affect the next file you send from your computer, not pages already in the printer's queue. If
this is the case, it is stated in the relevant topic.
Some of the controls are available using the front-panel menus (for example) pen width, pen color, overlapping lines).
Print mode options are controlled from the front-panel.
Why Use the Front Panel?
By default, the printer looks to your software to provide information on all the above attributes. However, your driver or
application may not provide these controls or you may want to experiment with various effects, or try a temporary
change, without the need to change your images or your driver settings.
Some of these settings do not affect the output generated when printing from most of the applications under Windows
when using a HP-GL/2 driver.
Introduction
Media & Ink
Page Format
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Pen Widths and Colors in the Internal Palettes
The “pens” discussed throughout these topics are the conceptual pens in a software palette, rather than the printer’s
physical printheads.
The printer has three pen palettes:
•
Factory
•
Palette A
• Palette B.
The factory palette cannot be changed. You can, however, change the line width and color settings for each pen in the
remaining two palettes (palette A and palette B). Initially, all three palettes are identical. Each palette has 16 pens which
can include pens of different widths and any combination of the printer’s predefined 256 colors.
Related Information
•
To Select a Palette
•
Change the Palette Settings
•
How to define Palette A
Introduction
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Page Format
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
To Select a Palette
To select a palette through the front-panel menu, go to the Define Palette selection under HP-GL/2 Settings and choose
the palette you want. See Set-up Menu.
The following table describes the palette choices.
Palette
Comments
Software
The printer looks to your software for pen settings and ignores all three internal palettes.
Palette A
The printer assigns the attributes defined in Palette A to the pens defined in your software
as 0 through 15.
Palette B
The printer assigns the attributes defined in Palette B to the pens defined in your software
as 0 through 15.
Factory
The printer assigns the attributes defined in the Factory Palette to the pens defined in your
software as 0 through 15.
Introduction
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Page Format
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Change the Palette Settings
You cannot change the Factory palette, but you can define Palettes A and B to be whatever you choose. The defaults
are Palette, width:
Item
Available Options
Defaults
Palettes
Factory, A, B.
Factory
Pens
0 through 15.
Widths (mm)
0.13, 0.18, 0.25, 0.35, 0.50, 0.65, 0.70, 0.80, 0.90, 1.00, .13mm
1.40, 2.00, 3.00, 5.00, 8.00, 12.00. Note that 0.13 mm
is a one-pixel line width at 300 dpi and three-pixels line
width at 600 dpi
Colors
0 through 255.
How to define Palette A
As specified on the Palette
Print.
Introduction
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Page Format
Printer
Options
Front Panel
Image Appearance
Other
Print Management
Index
Printer Configuration
How to define Palette A
The following steps explain how to define Palette A.
Instructions
1.
Select (using the
keys)
Then Press:
Set-up menu
Enter
HP-GL/2
Enter
Define palette
Enter
4.
Palette A
Enter
5. Select pen to change (in this example 3).
Pen 3
Enter
Width = 0.13mm
Enter
7. Scroll to the width you want.
0.35mm
Enter > Back
Scroll to Color. The current color
8. assigned to the pen is displayed (in this
example 4)
Color = 4
Enter
9. Scroll to the color you want.
Color = 110
Enter > Back
Pen 3
Top
2.
3.
6.
10.
Select Palette A
The current width assigned to this pen is
displayed, for example Width=0.13mm.
If both width and color are correct (for
Pen 3), press Back four times
Repeat this procedure to define each of the other pens.
NOTE:
The palette you have just defined will take effect only when you select it to be the
current palette, as explained on To Select a Palette.
Introduction
Media & Ink
Page Format
Solutions
Setting Page Size in the
Front Panel
Printer
Options
Front Panel
Image Appearance
Other
Print Management
Index
Printer Configuration
Changing the Treatment of Overlapping Lines (Merge)
The Merge setting controls the overlapping lines in an image. There are two settings, Off and On. The following
illustration shows the effect of each setting.
Merge off (Default)
Merge on
A subsequent line hides a
previous line where they
overlap.
Overlapping lines and area
fills are merged.
You can set the merge setting from your software in some applications. Settings in your software override the frontpanel settings.
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Printing Images in Grayscale
There are times when you may want to print a color image in grayscale because it is faster. Examples of this are:
•
You want a draft where color is not important, for example to check that the image is not going to be clipped,
• You want a version for photocopying in black and white.
When you choose the he Ink menu Color settings > Grayscale option the printer renders colors as Grayscale rather. If
you only want to use black ink to print in grayscale, you should select the
Ink menu Color settings > True black option.
NOTE: You cannot change the color/grayscale setting for pages already in the printer's queue.
NOTE: HP-GL/2 drivers may override this setting.
Introduction
Media & Ink
Solutions
Front Panel
Setting Page Size in the
Front Panel
Page Format
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Print Speeds and Print Quality
The following table lists some Typical Printing Times (line drawings @ 20-25ºC and 30-60% relative humidity).
Typical Printing Times
Paper
Bright White
Color
Grayscale
Coated
Paper
ANSI-D size
ANSI-E size
Time (in secs)
Time (in secs)
Best
235
440
Normal
Draft
120
45
225
85
Best
Normal
135
80
250
150
Draft
Best
45
490
80
980
Normal
120
225
Draft
Best
85
325
160
625
Normal
Draft
135
45
250
80
Color/Grayscale
Color
Grayscale
More Printing Times
Quality
Introduction
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Page Format
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Typical Printing Times (Continued)
Paper
Heavy
Coated
Paper
ANSI-D size
ANSI-E size
Time (in secs)
Time (in secs)
Best
490
980
Normal
Draft
120
85
225
160
Best
435
870
Normal
Draft
135
45
250
80
Best
Normal
630
435
1200
830
Draft
325
620
Best
Normal
630
435
1200
830
Draft
325
620
Color/Grayscale
Color
Grayscale
Glossy Paper Color
Grayscale
Quality
Introduction
Media & Ink
Page Format
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Print Quality
You can set the overall print quality from the front panel (Set-Up > Print Quality).
In general choose:
•
Fast for maximum productivity. Ideal for checking prints, when print quality is not the most important. You can
reduce print speed if it is causing image quality problems with the Fast Quality Settings.
•
Normal to get a good combination of print quality and productivity. Ideal for line drawings with good print quality and
at speed.
• Best to get the high image quality. You can increase the resolution of the Best setting with the Best Quality Settings.
You can print images in different settings to see which gives the best combination of throughput and quality for your
application.
See Print Resolution for information on what resolution is used with each print quality setting.
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Advanced Options
Your HP DesignJet 800 printer provides several advanced optimization and quality enhancement features to
allow you to obtain the printed results you require.
•
Improving Line Quality and Graphics Details
•
Best Quality Settings
•
Fast Quality Settings
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Improving Line Quality and Graphics Details
The Set-up menu Optimize for option allows you the select the correct mode for the type of job you are printing. Two
modes are provided: Line drawings/text and Images.
Selecting the Line drawings/text option smooths the fine graduations along the angles and curves of the printed image
to refine the overall print quality. This enhancement produces:
•
Crisper lines.
•
Finer detail.
•
Line drawings with a ‘sharp’ appearance.
The Line drawings/text option only affects prints that have color content.
Selecting Line drawings/text (the default setting) ensures you will always get the best quality color prints, except when
printing the following files:
•
Mixed lines and scanned color images.
•
Mixed lines and color photographs.
For these files it is recommended that you select Optimize for > Images.
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Best Quality Settings
If you have selected the Best option as the Print Quality setting for you print session but require and even higher
resolution for your print job you will need to change the Best Quality Setting.
The Best Print quality option provides 600x600 dpi resolution in normal mode and 2400x1200 dpi in maximum detail
mode.
NOTE:
Using the maximum detail mode will improve resolution but will reduce printing speed and increase
memory requirements.
Use the following procedure to increase the Best quality print resolution:
Select (using the
keys)
Then Press:
1. Set-up
Enter
2. Advanced Options
Enter
3. Best quality settings
Enter
4. Maximum detail
Enter
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Fast Quality Settings
If you have selected the Fast option as the Print Quality setting for you print session and this high speed mode causes
an unacceptable image quality you will need to reduce the printing speed. This can only be done from the front panel of
the printer because it is not available as an option in the printer driver.
Use the following procedure to reduce the Fast print quality printing speed:
Select (using the
keys)
Then Press:
1. Set-up
Enter
2. Advanced Options
Enter
3. Fast quality settings
Enter
4. Reduced speed
Enter
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Print Management
These topics describe the best methods of managing the work that the printer is doing.
•
Cancelling a Page that is Printing
Shows you how to cancel a page that is currently being printed.
•
Cancelling the Drying Time
Shows you how release a page from the printer before the drying time has finished.
•
Managing the Queue
Details how to manage job queueing for maximum efficiency.
•
Nesting Pages
Explains how to nest prints to minimize your roll media usage
Index
Printer Configuration
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Cancelling a Page that is Printing
Use the following procedure to cancel a page that is currently being printed.
1. Press Cancel on the front panel.
Cancel Key
The printer advances the paper as though the print were finished. A multi-page job or a big file may take longer to
stop printing than other files.
Introduction
Media & Ink
Page Format
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Cancelling the Drying Time
CAUTION: Use caution when performing this procedure as an image which has had insufficient time to dry
could get damaged.
Use the following procedure to cancel the drying time for the job waiting for the end of drying time.
1. Press Cancel or Form Feed & Cut on the front panel.
Cancel Key
Form Feed & Cut Key
The printer will release the printer and it will fall into the paper bin.
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Managing the Queue
These topics explain how the queueing function operates and how to use to manage your print jobs.
•
What is the Queue?
•
Printing with Queueing Turned ON
•
Printing with Queueing Turned OFF
•
Starting to Print a File that is Waiting for a Time-out
•
Identifying a Job in the Queue
•
Prioritizing a Job in the Queue
•
Prioritizing a Job in the Queue
•
Making Copies of a Job in the Queue
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
What is the Queue?
Your printer can store pages in a queue at the same time as printing the current page. It stores them page by page. If
you send only a single-page, you can regard these as files.
The size of the queue is limited by number of jobs (maximum of 32 jobs) and the total memory available.
The queue stores processed output pages, not the input jobs.
NOTE:
If you send a very complex PostScript job with Queueing Off, the printer may stop during printing
of the image while it is processing the job. This may result in an image quality defect. To avoid this,
always print very complex files with Queueing On.
When Queueing is On and the printer receives print files, the files are stored in the queue in the order
they are received. If Nesting is Off (the default), the files are printed as soon as possible, in the order
they are received. If Nesting is On, files are printed when the time-out period expires or there are
enough files to fill a page width. You can re-send files which have already been printed.
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Printing with Queueing Turned ON
•
You can send pages to the printer without waiting for the current page to finish printing.
•
Pages are stored in the queue in the order they are received.
•
You can manipulate the pages in the queue, for example prioritizing them and reprinting them.
•
You can use nesting, the printer's paper-saving feature (see Nesting Pages).
•
While one page is printing, the printer will accept and process the next file.
Index
Printer Configuration
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Printer
Options
Image Appearance
Other
Print Management
Index
Printer Configuration
Printing with Queueing Turned OFF
If Queueing is Off and the printer receives print files, the files are printed as they are received, and are not stored in the
queue. Nesting settings have no effect when Queueing is Off.
•
Files are printed as they are received, and are not stored in the queue.
•
The printer will not accept another file sent from the computer until the current page has finished printing and the
printer is ready.
• You cannot use nesting.
If you turn queueing off while pages are still in the queue, they will be printed and (if nesting is on) nested, until the
queue is empty.
NOTE:
If the printer is turned off with files in the queue that have not been printed, the files are lost and
must be resent.
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Starting to Print a File that is Waiting for a Time-out
If all is in order (paper loaded, all ink components installed, and no file errors), there are still reasons why a file you have
sent from your computer may not start printing when expected:
•
The print file may lack a proper file terminator and the printer is therefore waiting for the specified I/O time-out
period before assuming it is complete. See To Change the I/O Time-out Setting.
•
Nesting may be on and the printer is waiting for the specified nest wait time-out period before calculating the
appropriate nests. In this case, the printer display shows the remaining time for the nesting time-out. See How Long
does the Printer Wait for Another File?.
•
If your file has selected sheet or roll paper to print the job onto, but the selected paper is not loaded into the printer:
– the front panel will prompt you to load the selected paper, once you load the paper the printer will print the
job.
– Press the Cancel key and re-send the job with paper that you have available.
If you want to override the time-out period and start printing, press Form Feed and Cut on the front panel.
Form Feed
and Cut Key
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Printer
Options
Image Appearance
Other
Print Management
Identifying a Job in the Queue
In Queueing & Nesting, you can scroll through the pages in the queue.
The queue positioning operates as follows:
•
The job currently being printed is in position 0.
•
The next job to be printed is in position 1.
•
The one after in position 2, etc. …
•
The previous job printed is in position -1
•
The one before that in position -2, etc. …
Job name
Jobs already printed
Up to 32
Jobs
Current job
Jobs yet to be printed
Position in queue
Index
Printer Configuration
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Prioritizing a Job in the Queue
To make any job in the queue the next one to be printed, highlight it in the queue and press Enter. Then you mesu
choose Move to top menu option to the job the next one to be printed.
If nesting is turned on (see page What is Nesting?) the prioritized job may still be nested with others. If you really want
this job to be printed without nesting, then first turn nesting off and then use Move to top to make it next job in the
queue.
Deleting a Job from the Queue
Under normal circumstances, there is no need to delete a job from the queue after printing it, as it will just “fall off the
end” of the queue as more files are sent. However, if you have sent a file in error and want to avoid any chance of it
being reprinted, you can simply delete it, by selecting it and choosing Delete.
To remove a job that has not yet been printed, simply identify it by its position in the queue (see Prioritizing a Job in the
Queue) and delete it, by choosing Delete.
If the job is currently being printed (its queue position is 0), and you want both to cancel the job and to delete it, first
press the Cancel key and then delete it from the queue.
Introduction
Media & Ink
Page Format
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Making Copies of a Job in the Queue
Has the job already
been printed?
Yes
No
Do you want one copy
or several?
What to do
One
Use Move to top (see Prioritizing a Job in the Queue).
Several
Use Reprints (see below) and then use Move to top (see
Prioritizing a Job in the Queue).
One or Several
Use Copies (see below).
In all cases, the job must still be in the queue. Use the following procedure to make copies of a job in the queue:
NOTE:
The setting you specify in this option overrides any value set by your software.
NOTE:
If Rotate (see page Rotating an Image) was on when you sent the file, every copy will also be rotated.
Copies and Reprints
1. Select the job and choose Copies or Reprints (from the Job Management menu).
2. Use the scrolling keys to specify the number of copies required and press Enter.
The number you enter is the actual number of pages to be printed; for example, choosing 2 for a page not yet
printed means you will get the one original and one copy. The maximum is 99.
If you want to cancel a Copies or Reprints selection choose the Cancel menu option for the file you have selected to
print copies or reprints.
Introduction
Media & Ink
Page Format
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Nesting Pages
•
What is Nesting?
•
Automatic Rotation?
•
When Does the Printer Try to Nest Pages?
•
Which Pages Qualify for Nesting?
•
Turning Nesting On and Off
•
What Happens to Nesting if You Turn Queueing Off?
•
How Long does the Printer Wait for Another File?
Printer
Options
Other
Print Management
Index
Printer Configuration
Introduction
Media & Ink
Page Format
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
What is Nesting?
Nesting means placing pages side-by-side on the paper (rather than one after the other), to avoid wasting paper.
NOTE:
Nesting can only be used with roll media.
Direction of
paper flow
Direction of
paper flow
Paper Saved
Nesting off
Nesting on
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Printer
Options
Image Appearance
Other
Print Management
Index
Printer Configuration
Automatic Rotation?
The printer may automatically rotate pages when nesting in on. It may do this even with a single page.
Since nesting may automatically rotate pages, the Rotate setting of the Paper > Page Format menu is ignored while
nesting is on.
Any HP-GL/2 page containing RTL data will not be rotated.
Paper Saved
Direction
of paper
flow
Nesting off
Nesting on
Introduction
Media & Ink
Page Format
Solutions
Setting Page Size in the
Front Panel
Front Panel
Printer
Options
Image Appearance
Other
Print Management
When Does the Printer Try to Nest Pages?
When all the following are true:
•
The printer is loaded with roll paper rather than sheet paper.
•
In the front-panel menus, Queue is ON (the default). See page What is the Queue?
•
In the front-panel menus, Nest is ON. See page Turning Nesting On and Off.
Which Pages Qualify for Nesting?
In order to be in the same nest, the individual pages must be compatible on the following criteria:
•
Color or grayscale.
NOTE: Either all are color or all are grayscale.
•
Files must be at the same dots per inch setting.
•
All pages must have the same print quality setting (Best, Normal, Draft).
•
Margin sizes must be the same for all pages (normal or extended).
•
All pages must be the same graphics language.
•
Equal mirror setting
Index
Printer Configuration
Introduction
Media & Ink
Page Format
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Turning Nesting On and Off
To enable or disable nesting, select Nest from the Job Management menu and choose On or Off.
•
On
•
Off
The printer will search all through the queue for suitable pages. It will nest the pages according to an
algorithm that, for most combinations of page sizes, saves the most paper. The resulting nesting
pattern may still vary, depending on the size of the first page.
The printer will not nest pages.
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
What Happens to Nesting if You Turn Queueing Off?
Turning queueing off does not turn nesting off for pages already in the queue. The printer prints all the pages in the
queue before accepting any more files. As soon as you turn queueing off, the nesting setting also changes to off. When
queueing is turned on again, the printer restores nesting to its previous setting.
How Long does the Printer Wait for Another File?
So that the printer can make the best nest possible, it waits after a file has been received to check if a subsequent page
will nest with it or with pages already in the queue. This waiting period is the nest wait time factory default nest wait time
is two minutes. This means that the printer waits for up to two minutes after the last file is received before printing the
final nest. You can change this waiting time using the front panel menu. The available range is 1 to 99 minutes.
While the printer is waiting for nesting to time out, it displays the remaining time in the front-panel display. You can print
the nest (cancel the nest wait) by pressing the Form Feed and Cut key.
Introduction
Media & Ink
Page Format
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer Configuration
These topics explain how to change the configuration of your printer.
•
Printer Information
•
Front Panel Setup
•
Altitude Setting
•
Changing the Graphics Language
•
Graphics Language and Networks
•
Setting up the I/O Card
•
Controlling the Cutter
•
Upgrading Your Printer
•
Color Settings
•
Logs
Printer
Options
Other
Print Management
Index
Printer Configuration
Introduction
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Page Format
Printer
Options
Front Panel
Image Appearance
Other
Print Management
Index
Printer Configuration
Printer Information
Your HP DesignJet 800 printer provides an information display on the front panel that shows the current
configuration of the system. You can also print out this information directly on your printer.
Select Set-up > Printer information > View to view the information or Printer information > Print to print it.
The printer information screen shows the following information about your printer:
•
Model Number
•
Scan Axis Usage
•
Serial Number
•
Paper Axis Usage
•
Service ID
•
Service Station Usage
•
Firmware Rev.
•
Spittoon Usage
•
Accessory Rev.
•
Pinch Lift Usage
•
Paper Used
•
Cutter usage
•
Ink used (C, M, Y, K)
•
Ink Usage
Introduction
Media & Ink
Page Format
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Front Panel Setup
You can configure the following parameters for the front panel:
•
Menu and Message Language
•
Alert Buzzer
•
Screen Contrast
Printer
Options
Other
Print Management
Index
Printer Configuration
Introduction
Media & Ink
Page Format
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Menu and Message Language
The following languages can be used for all menus and messages shown on the front panel of your HP DesignJet 800
printer:
•
English
•
German
•
Spanish
•
French
•
Italian
•
Japanese
•
Portuguese
•
Korean
•
Simplified Chinese
•
Traditional Chinese
To change the language:
1. Select the Front Panel > Language option from the Set-up menu.
2. To scroll to the language you require and press Enter.
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Alert Buzzer
Your HP DesignJet 800 printer is equipped with an alert buzzer that is used to warn you when:
•
A task has completed.
•
An error has been detected.
•
You change a parameter from the front panel.
To enable or disable the buzzer:
1. Select the Front Panel > Buzzer option from the Set-up menu.
2. Highlight Buzzer = ON or Buzzer = OFF (whichever is displayed) and press Enter.
3. Scroll to the option you require, ON or OFF, and press Enter.
Introduction
Media & Ink
Page Format
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Screen Contrast
You can adjust the screen contrast of the front panel to best suit the ambient lighting conditions at your location. The
contrast can be varied from 0% to 100% in 5% increments. The default setting is 50% and is suitable for most situations.
To adjust the screen contrast:
1. Select the Front Panel > Contrast option from the Set-up menu.
NOTE:
Any value below 20% shows a blank screen and any value over 80% shows a black screen.
2. Scroll to the required value and press Enter.
Introduction
Media & Ink
Page Format
Solutions
Setting Page Size in the
Front Panel
Front Panel
Printer
Options
Image Appearance
Other
Print Management
Index
Printer Configuration
Altitude Setting
Your HP DesignJet 800 printer contains a vacuum pump which is used to hold media on the platen. The altitude
of your location effects the efficiency of this pump so you need to specify the altitude to ensure the pump operates
correctly.
To set the altitude:
1. Select the Altitude option from the Set-up menu.
2. Scroll to the required value (0 - 1000m, 1000m to 2000m or > 2000m) and press Enter.
The following table shows the corresponding altitude values in feet.
Meters
Feet
0 -1000
0 - 3300
1000 - 2000
3300 - 6600
> 2000
>6600
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Changing the Graphics Language
Your software application uses a graphics language to communicate with the printer. The printer's default language
setting is called Automatic and works for most software applications.
In Automatic mode, the printer determines which type of file it is receiving i.e. PostScript or HP-GL/2, and prints it.
Unless you are experiencing printing problems you should not need to change this default.
See To Change the Graphics Language Setting to modify this setting.
Introduction
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Page Format
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
To Change the Graphics Language Setting
To change the graphics language setting, go to the Setup/Graphic Language menu. The following selections are
available:
Graphics Language Settings
Language
Comments
Automatic
Choose Automatic to let the printer determine which type of file it is
receiving. This setting works for most software applications.
HP-GL/2
Choose this setting if you are not working with PostScript files and:
CALS G4
•
you have experienced image position problems.
•
you have experienced timing problems.
Choose this setting if your files are in the CALS G4 language. This
must be selected because the Automatic setting is not sufficient. If
you select the CALS G4 setting to print a CALS file, the printer must
be returned to the default setting afterwards to enable printing in other
languages.
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Graphics Language and Networks
For system administrators
If you are using the printer with a network spooler, consider having your system administrator modify the spooler to
insert automatically the PJL language-switching commands at the beginning and end of each file. This allows the printer
to switch automatically into the correct graphics language for your current print and returns the printer to the front-panel
graphics language setting for subsequent prints.
For information on ordering PJL reference information, see Ordering Accessories.
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Setting up the I/O Card
Network
With a network interface (such as the HP JetDirect Print Server), refer to your network interface documentation for
advice on any front-panel configuration. The front-panel menu is I/O Setup > Card Set-up.
To Change the I/O Time-out Setting
Some software applications do not write a file terminator at the end of a file. In this case, the printer does not know
when the file is complete and will wait for more data until the end of the “I/O Time-out” period. By default, this period is
30 minutes. You can change the time-out setting in the front-panel menu (Set-Up > I/O setup > I/O Timeout) to as little
as 30 seconds.
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Controlling the Cutter
With roll media loaded when any print job you have send to the printer completes the roll is automatically cut and the
print job falls into the media bin. There may be a delay before the roll is cut due to the drying time you have programed
or the printer has automatically selected.
In some situations you may not wish to cut the roll after each print job. Use the following procedure to control the cutter.
The front panel menu selections are:
Select (using the
keys)
Then Press:
1. Paper menu
Enter
2. Cutter
Enter
3. ON or OFF
Enter
Introduction
Page Format
Media & Ink
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Upgrading Your Printer
System Software
“System Software” is the name given to a type of software which runs the functions in your printer.
System Software downloading
From time to time there will be system software upgrades available from Hewlett-Packard. System software upgrades
increase your printers functionality and enhances the features that your printer already possesses. System software
can be downloaded from the Internet.
For the latest upgrades, go to http//www.hp.com/go/designjet. Follow the on-screen directions.
Introduction
Media & Ink
Page Format
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Color Settings
Your printer can emulate the color behavior of offset printing presses, allowing you to use your printer for color proofing.
To get accurate colors for your proof, select the color emulation mode that matches your offset printing standards from
the Ink menu Color settings option. The selections are:
Color/monochrome
Refer to Printing Images in Grayscale for further details
•
Color - the printer prints in color
•
Grayscale - the printer prints the color image in grey shades.
•
True black - the printer prints the color image in grey shades using black ink only.
RGB
•
Native/Device RGB - No ink emulation
•
sRGB - Standard RGB
Rendering Intent
•
Perceptual
•
Saturation
•
Colorimetric
Introduction
Media & Ink
Page Format
Solutions
Setting Page Size in the
Front Panel
Front Panel
Image Appearance
Printer
Options
Other
Print Management
Index
Printer Configuration
Logs
Your HP DesignJet 800 printer keeps a log for the printheads and an error log. These logs are normally used by
service engineers.
Printhead Log
The printhead log contains a list of the last five printheads of each color along with information about the usage of the
printhead.
Error Log
Lists the last errors detected the printer has detected along with the date the error occurred and a unique error code for
the type of error detected.
Introduction
Media & Ink
Care of the Printer
Solutions
Installing Expansion
Cards
Front Panel
Specifications
Printer
Options
Other
Ordering Accessories
Index
Glossary
Other
The Other tab provides miscellaneous procedures and information that may be required to ensure your printer remains
in a fully operational condition at all times.
The Other tab contains these sections:
•
Care of the Printer
•
Installing Expansion Cards
•
Specifications
•
Ordering Accessories
•
Glossary
Introduction
Media & Ink
Care of the Printer
Solutions
Installing Expansion
Cards
Front Panel
Printer
Options
Specifications
Care of the Printer
This section contains information on general maintenance of the printer.
•
Cleaning the Printer
Instructions for cleaning the exterior of your printer.
•
Storing and Moving Your Printer
Instructions on how to move and store your printer.
Other
Ordering Accessories
Index
Glossary
Introduction
Media & Ink
Care of the Printer
Solutions
Installing Expansion
Cards
Front Panel
Specifications
Printer
Options
Other
Ordering Accessories
Index
Glossary
Cleaning the Printer
WARNING: To avoid an electric shock, make sure that the printer is switched OFF and disconnected from the
mains supply before you clean it. Do not let water get inside the printer.
CAUTION: Do not use abrasive cleaners on the printer.
NOTE:
Any maintenance or repairs beyond those described in this chapter should be done by a qualified
service technician.
Cleaning the Printer Exterior
Clean the outside of the printer as required with a damp sponge or a soft cloth and a mild household cleaner such as
non-abrasive liquid soap.
Introduction
Media & Ink
Care of the Printer
Solutions
Installing Expansion
Cards
Front Panel
Specifications
Printer
Options
Other
Ordering Accessories
Index
Glossary
Storing and Moving Your Printer
If you need to move your printer or store it for an extended period of time, you need to prepare your printer
properly to avoid possible damage to the printer. To prepare your printer, follow the instructions given below:
CAUTION: It is important that you do not remove the Ink Cartridges and Printheads before moving or storing
the printer.
1. Switch the power off at the On/Off power switch on the front of the printer.
2. Disconnect any cables connected to the printer; parallel interface, LAN connection.
3. Repack the printer in its original packaging. Refer to Assembly/Repacking Instructions booklet supplied with the
printer for details.
4. If you have to move your printer you will need the original packaging. If necessary you can order a kit of the
packaging materials. Contact HP support and they will supply it to you. If necessary they will repackage the printer
for you.
Introduction
Media & Ink
Care of the Printer
Solutions
Installing Expansion
Cards
Front Panel
Printer
Options
Specifications
Installing Expansion Cards
The following options are available for your HP DesignJet 800 printer:
•
Network Card Installation
Other
Ordering Accessories
Index
Glossary
Introduction
Media & Ink
Care of the Printer
Solutions
Installing Expansion
Cards
Front Panel
Specifications
Printer
Options
Other
Ordering Accessories
Index
Glossary
Network Card Installation
An HP JetDirect Network Card is installed in your printer when you buy it. If you wish to use a different network card
install it using the following procedure.
HP JetDirect Network Card Installation
1. Before installing a card, switch off the printer
and unplug it from the mains electricity supply.
2. Carefully remove the plastic cover from the
left-hand back of the printer by unclipping it.
This cover gives access to the two slots for an
Accessory card and a LAN card.
•
Press in the thumb-tab on the side furthest from the edge that has the cablehole.
•
Ease the cover out in the direction of the
embossed arrow, pivoting it by the hinge
clips on the side that has the edge cablehole.
Continued …
Introduction
Media & Ink
Care of the Printer
Solutions
Installing Expansion
Cards
Front Panel
Specifications
Printer
Options
Other
Ordering Accessories
Index
Glossary
HP JetDirect Network Card Installation (Continued)
3. Remove the cover completely Inside the
compartment there are two slots for a LAN
card or an Accessory card.
You can use either slot for either card, but we
recommend putting a LAN card on the left
(nearer to the front of the printer) and an
Accessory card on the right. In this way the
cable from the LAN card can easily pass
through the slot in the door.
4. To insert a LAN card (or an Accessory card),
remove the metal cover from the appropriate
slot by unscrewing its two screws. You can
use a screwdriver or do it manually.
5. When you have inserted the card, screw it
into place, using its two screws (at the top
and bottom of the card). Again, this can
be done with a screwdriver or manually.
Previous …
Continued …
Introduction
Media & Ink
Solutions
Installing Expansion
Cards
Care of the Printer
Front Panel
Specifications
Printer
Options
Other
Ordering Accessories
Index
Glossary
HP JetDirect Network Card Installation (Continued)
6. Insert the LAN cable into the LAN card. It is
simply pushed into place and clicks when
locked.
7. Carefully replace the plastic cover by clipping
it back into place:
•
Put the two hinge clips on the side that
has the edge cable-hole into their slots.
•
Swivel the cover in the direction opposite
to the embossed arrow and clip the other
two tabs on the opposite side into their
slots. Ensure that the LAN cable passes
correctly through the edge cable-hole
(shown by the yellow arrow).
•
Take care to carefully route the LAN cable
so it does not interfere with the spindle or
roll.
8. Once you have completed the physical installation of the card you will have to configure it for
you LAN, see Setting up the I/O Card.
Previous …
Introduction
Media & Ink
Care of the Printer
Solutions
Installing Expansion
Cards
Front Panel
Specifications
HP-GL2 Accessory Card Installation
Not available for your printer model.
Printer
Options
Other
Ordering Accessories
Index
Glossary
Introduction
Media & Ink
Care of the Printer
Solutions
Installing Expansion
Cards
Specifications
•
Functional Specifications
•
Memory Specifications
•
Printer Power Specifications
•
Ecological Specifications
•
Enviromental Specifications
•
Acoustic Specifications
•
Connection Specifications
Front Panel
Specifications
Printer
Options
Other
Ordering Accessories
Index
Glossary
Introduction
Media & Ink
Care of the Printer
Solutions
Front Panel
Installing Expansion
Cards
Specifications
Printer
Options
Other
Index
Ordering Accessories
Glossary
Functional Specifications
HP DesignJet 800 Functional Specifications
Functional Specifications
Four colors: cyan, magenta, yellow and black.
Printheads:
600 dpi,
HP Ink
Supplies
Supplies
36 kHz (Cyan, Magenta, Yellow).
36 kHz (Black).
Cyan
Ink Cartridges contents:
Magenta
Yellow
69 ml
Black
Paper sizes
Width (carriage axis)
Length (paper axis)
Minimum
Minimum
625 mm
25 inches
Roll - D/A1 size
printer
Roll - A0+/
E+ size printer
Sheet -D/
A1 size printer
Sheet -A0+/
E+ size printer
Maximum
140 mm
5.5 inches
1071.8 mm
42.2 inches
625 mm
25 inches
1071.8 mm
42.2 inches
Maximum
1000 mm
40 inches
100 mm
4 inches
roll external
diameter
140 mm
5.5 inches
1897 mm
74.7 inches
More …
Introduction
Media & Ink
Care of the Printer
Solutions
Installing Expansion
Cards
Front Panel
Specifications
Printer
Options
Other
Ordering Accessories
Index
Glossary
HP DesignJet 800 Functional Specifications (Continued)
Functional Specifications
HP Supported Mediaa
HP Bright White Inkjet Paper (Bond)
HP Vellum
HP Natural Tracing Paper
HP Coated Paper
HP Heavyweight Coated Paper
HP Matte film
HP High-Gloss Photo Paper
HP Semi-Gloss Photo Paper
HP Paper-Based Semi-Gloss
HP Clear film
HP Translucent bond
HP Studio Canvas
HP Satin Poster Paper
HP Banners with Tyvek®
HP Colorfast Adhesive Vinyl
Previous …
More …
Introduction
Media & Ink
Care of the Printer
Solutions
Installing Expansion
Cards
Front Panel
Specifications
Printer
Options
Other
Index
Ordering Accessories
Glossary
HP DesignJet 800 Functional Specifications (Continued)
Functional Specifications
Resolution
Print Mode
Line drawing/text
Image
Render
300x300dpi
150x150 dpi
Halftone
600x300 dpi
600x300 dpi
Render
600x600 dpi
300x300 dpi
Halftone
600x600 dpi
600x300 dpi
Render
600x600 dpi
600x600 dpi
Halftone
600x600 dpi
600x600 dpi
Best
Render
(maximum detail) Halftone
600x600 dpi
1200x1200 dpi
1200x600 dpi
2400x1200b dpi
Fast
Normal
Best (default)
Previous …
More …
Introduction
Media & Ink
Care of the Printer
Solutions
Installing Expansion
Cards
Front Panel
Specifications
Printer
Options
Other
Ordering Accessories
Index
Glossary
HP DesignJet 800 Functional Specifications (Continued)
Functional Specifications
Margins
Roll (normal)
Sheet (normal)
Roll (small)
Sheet (small)
Side Margins 5 mm
Leading Edge Margin 17 mm
Trailing Edge Margin 17 mm
Graphics
languages
supported
HP-GL/2
HP-RTL
CALRASTER
Adobe PostScript 3 (supports Asian fonts)
Accuracy
0.2% of the specified vector length at 23º (73ºF), 50-60% Relative Humidity,
on HP special polyester film.
Previous …
a. From time to time, new paper types may become available. For up-to-date information, please
contact your HP dealer or our web site www.designjet-online.hp.com.
b. Glossy Photo Media Only
Introduction
Media & Ink
Care of the Printer
Solutions
Installing Expansion
Cards
Front Panel
Specifications
Printer
Options
Other
Ordering Accessories
Physical Specifications
Physical Specifications
Type
Weight
Width
Depth
Height
D/A1 size printer
38.5 kg
85 lb
1253 mm
49 inches
470 mm
19 inches
349 mm
14 inches
A0+/E+ size
printer
45 kg
99 lb
1690 mm
67 inches
674 mm
27 inches
1100 mm
43 inches
Index
Glossary
Introduction
Media & Ink
Care of the Printer
Solutions
Installing Expansion
Cards
Front Panel
Specifications
Memory Specifications
Memory Specifications
Internal RAM
96MB
Hard Disk
6 GB
Can be upgraded to:
160MB
Printer
Options
Other
Ordering Accessories
Index
Glossary
Introduction
Media & Ink
Care of the Printer
Solutions
Installing Expansion
Cards
Front Panel
Specifications
Printer
Options
Other
Ordering Accessories
Printer Power Specifications
Printer Power Specifications
Source
100-240 V AC ±10% auto-ranging
Frequency
50/60 Hz
Current
3 amp maximum
Consumption
150 watts maximum
Index
Glossary
Introduction
Media & Ink
Care of the Printer
Solutions
Installing Expansion
Cards
Front Panel
Specifications
Printer
Options
Other
Ordering Accessories
Index
Glossary
Ecological Specifications
Ecological Specifications
Energy efficiency
Compliant with Energy Star Program EPA (US).
Manufacturing
process
Free of ozone-depleting chemicals (Montreal Protocol).
Plastics
Free of brominated flame retardants (PBB and PBDE).
All housing parts made of the same material: ABS.
Parts marked according to ISO 11469 standard.
Metals
Enclosures made of electro-galvanized steel sheet.
Packaging
Cardboard (non-chlorine-bleached) and foam are 100% recyclable.
Inks used for printing do not contain heavy metals.
User
Documentation
Majority provided in Adobe Acrobat PDF format on CD-ROM
Batteries
Not used.
Recyclablility
Modular construction, screws easy to find and disassembly done
using universal tools.
Introduction
Media & Ink
Care of the Printer
Solutions
Installing Expansion
Cards
Printer
Options
Front Panel
Specifications
Other
Ordering Accessories
Index
Glossary
Enviromental Specifications
Environmental Specifications
Operating Ranges Printing:
Optimal print quality for HP
glossy media:
15°C to 35°C (59° F to 95° F) RH 20% to
70%.
15°C to 30°C (59° F to 86° F) RH 20% to
80%.
Optimal print quality for other 15°C to 35°C (59° F to 95° F) RH 20% to
HP media:
70%.
Non Operating
Ranges
NOTE:
Printer:
-40°C to 70°C (-40° F to 158° F)
Packed consumable items
and system:
-40°C to 60°C (-40° F to 140° F)
At altitudes greater then 3000m the printer may have operational problems.
Introduction
Media & Ink
Care of the Printer
Solutions
Installing Expansion
Cards
Front Panel
Specifications
Printer
Options
Other
Ordering Accessories
Acoustic Specifications
Acoustic Specifications
Operating sound pressure
54 dB (From a one-meter bystander position)
Idle sound pressure
<30dB (A) (From a one-meter bystander
position)
Operating sound power
6.5 Bels (A)
Idle sound power
<4.3 Bels (A)
Index
Glossary
Introduction
Media & Ink
Care of the Printer
Solutions
Installing Expansion
Cards
Connection Specifications
•
Cable Specification
•
Recommended Cables
Front Panel
Specifications
Printer
Options
Other
Ordering Accessories
Index
Glossary
Introduction
Media & Ink
Solutions
Front Panel
Installing Expansion
Cards
Care of the Printer
Specifications
Printer
Options
Other
Ordering Accessories
Index
Glossary
Cable Specification
The connector on the printer is 36-pin female connector. Most existing parallel cables support IEEE-1284
compatible communication, but for use with this printer, the cable must meet the specifications in the following
table:
Parallel (IEEE-1284 compatible/Centronics) Interface
Pin
Wire/Signal Name
Source
1
Strobe
computer
2…9
D0 … D7 (data lines)
both
10
Ack
printer
11
Busy
printer
12
PError
printer
13
Select (SelectOut)
printer
14
AutoFd
computer
16
GND
19 … 30
GND
31
Init
computer
32
Fault
printer
36
SelectIn
computer
Introduction
Media & Ink
Care of the Printer
Solutions
Front Panel
Installing Expansion
Cards
Specifications
Printer
Options
Other
Ordering Accessories
Index
Glossary
Recommended Cables
The following cable is recommended for optimum performance and electromagnetic compatibility:
Recommended Cable
Interface type (Computer)
HP part number
Cable length
Connector type at
computer end of
cable
IEEE compatible/Centronics
Interface (All)
C2951A
3.0 m
25-pin male
USB
C2392A
5.0 m
USB plug
Introduction
Media & Ink
Care of the Printer
Solutions
Installing Expansion
Cards
Front Panel
Specifications
Printer
Options
Other
Index
Glossary
Ordering Accessories
Ordering Accessories
You can order supplies and accessories in any of the following ways:
• Call your local authorized HP dealer.
• Contact your local HP Sales and Support office.
• Refer to the Hewlett-Packard Support / Services booklet that was supplied with your printer.
•
Documentation
•
Hardware
•
Consumable Items
Introduction
Media & Ink
Care of the Printer
Solutions
Front Panel
Installing Expansion
Cards
Specifications
Printer
Options
Other
Index
Glossary
Ordering Accessories
Documentation
Language
Pocket Guide
User’s Reference
Guide
Unpacking and
Assembly poster
HP Part Numbers
Chinese
C7769-90020
C7769-90131
C7769-90040
Czech
C7769-90021
Not available
Not available
English
C7769-90011
C7769-90131
C7769-90031
French
C7769-90015
C7769-90135
C7769-90035
German
C7769-90014
C7769-90134
C7769-90034
Greek
C7769-90022
Not available
Not available
Hungarian
C7769-90023
Not available
Not available
Italian
C7769-90017
C7769-90137
C7769-90037
Japanese
C7769-90018
C7769-90138
C7769-90038
Korean
C7769-90012
C7769-90132
C7769-90032
Lithuanian
C7769-90029
Not available
Not available
Polish
C7769-90024
Not available
Not available
Portuguese
C7769-90019
C7769-90139
C7769-90039
Russian
C7769-90025
Not available
Not available
Spanish
C7769-90016
C7769-90136
C7769-90036
Next
Introduction
Media & Ink
Care of the Printer
Language
Solutions
Front Panel
Installing Expansion
Cards
Specifications
Pocket Guide
Printer
Options
Other
Index
Glossary
Ordering Accessories
User’s Reference
Guide
Unpacking and
Assembly poster
HP Part Numbers
Slovakian
C7769-90030
Not available
Not available
Taiwanese
C7769-90013
C7769-90013
C7769-90033
Thai
C7769-90026
Not available
Not available
Turkish
C7769-90027
Not available
Not available
Previous
Introduction
Media & Ink
Care of the Printer
Solutions
Installing Expansion
Cards
Front Panel
Printer
Options
Specifications
Other
Index
Glossary
Ordering Accessories
Hardware
Item
Memory Module
HP Part Number
128 MB
C2388A
All memory expansion modules are: SODIMM 168pin x 64 EDO 50
nanoseconds, 3.3V
JetDirect EIO Network Cards
Spindle
Stand 610 mm - 24 inch
10Base-T
J3110A
10 Base2, 10-T
J3111A
LocalTalk
J3112A
Token Ring
10/100Base-TX
J4169A
610 mm - 24 inch
C2388A
1067 mm - 42 inch
C2389A
FL for 500 series
C7782A
GR for 800 series
C7781A
Introduction
Media & Ink
Care of the Printer
Solutions
Installing Expansion
Cards
Printer
Options
Front Panel
Specifications
Other
Index
Glossary
Ordering Accessories
Consumable Items
Item
Color
Ink Cartridges
Black
HP Supply
No.
10
Printheads
C4844A
C4911A
Cyan
Yellow
HP Part
Number
82
C4913A
Magenta
C4912A
Black
C4810A
Cyan
Yellow
Magenta
11
C4811A
C4813A
C4812A
To achieve the best performance from your printer, we recommend you only use genuine Hewlett-Packard
accessories and supplies, whose reliability and performance have been thoroughly tested to give trouble-free
performance.
Introduction
Media & Ink
Care of the Printer
Solutions
Installing Expansion
Cards
Front Panel
Printer
Options
Specifications
Other
Ordering Accessories
Index
Glossary
Glossary
Term
Meaning
ANSI paper
An American standard paper size; e.g. D, E.
Architectural
paper
The Architectural paper sizing system
application
The software you use to create your drawings.
Centronics
A standard for the parallel interface between computer and device.
clipping
Losing part of a drawing at the edges.
CMP
Complementary Media Program that helps HP customers grow their businesses
by referencing third-party printing material choices to ensure maximum
HP DesignJet printer flexibility and printing solutions.
CMYK
Cyan, magenta, yellow and black. The colors of the printer's four inks, and also a
standard color model.
Coated paper
Paper coated on one side for inkjet printing.
default
A value or condition that is assumed if no other value or condition is specified.
device
An external item connected to the computer: printer, tape drive, etc. Your HP
DesignJet is a device.
dpi
Dots per inch, a measure of print resolution.
drivers
Software that controls the communication between a computer and a device.
front panel
The control panel on the front right of the printer.
For More Terms, click on the Next Page Icon
Introduction
Media & Ink
Care of the Printer
Solutions
Installing Expansion
Cards
Front Panel
Printer
Options
Specifications
Term
Other
Ordering Accessories
Index
Glossary
Meaning
front panel
menus
The structure of options in the front-panel display.
graphics
language
A programming language telling a print device how to output graphic data.
grayscale
Shades of gray to represent colors.
high-gloss
photo
A glossy, opaque photographic paper.
HP-GL/2
One of Hewlett-Packard's standard graphics languages for plotters and printers.
Produces vector data.
I/O Input/
output
The transmission of data between a computer and a device.
IEEE-1284
A standard issued by the Institute of Electrical and Electronics Engineers (IEEE)
as the Standard Signaling Method for a Bi-directional Parallel Peripheral
Interface for Personal Computers
ink cartridge
The part of the HP Ink Supplies which contains all the ink used in the printer.
They are installed into the printer on the right side.
inked area
The smallest rectangle that contains all the content of the drawing, while
maintaining its relative dimensions.
ISO paper
An international standard paper size; e.g. A1, A2, etc.
JIS
A Japanese standard paper size.
For More Terms, click on the Next Page Icon
Introduction
Media & Ink
Care of the Printer
Solutions
Installing Expansion
Cards
Term
Front Panel
Printer
Options
Specifications
Other
Ordering Accessories
Index
Glossary
Meaning
LAN
Local area network.
long-axis
printing
Printing a page when the length is longer than a standard page size.
margin
The space around the page added by the printer to separate one page from
another and to avoid printing right to the edge of the paper.
Nesting
Placing two or more pages side-by-side on roll paper to avoid waste.
nozzles
Located underneath the printhead. The nozzles direct the ink onto the page.
palette
A set of logical pens defined by color and width.
PJL
Printer Job Language. A programming language that controls jobs going to a
printer.
parallel
interface
A type of interface between computer and device. Generally faster than a serial
interface.
PANTONE
The PANTONE MATCHING SYSTEM® is an international standard for color
communication in the graphics art industry.
pen
Even though the printer has no physical pens, the lines it draws match the
attributes of a pen.
platen
The exterior part of the printer on which the paper rests before going into the
printer.
printhead
The printhead is installed into the carriage assembly. It is the part which prints
the ink onto the paper.
For More Terms, click on the Next Page Icon
Introduction
Media & Ink
Care of the Printer
Solutions
Front Panel
Installing Expansion
Cards
Printer
Options
Specifications
Term
Other
Ordering Accessories
Index
Glossary
Meaning
printing area
Page size minus margins.
PostScript
Adobe PostScript is a computer language that describes the appearance of a
page, including elements such as text, graphics, and scanned images, to a
printer or other output device.
queueing
Placing each print received by the device into memory for processing with other
prints.
raster
A method for defining an image, in terms of dots rather than lines. Raster data
typically needs more memory than vector data.
Rendering
Intent
Rendering intent is a concept defined by ICC Spec ICC.1:1998-09, “File Format
for Color Profiles”.
From the specification: “Rendering intent specifies the style of reproduction to be
used during the evaluation of this profile in a sequence of profiles. It applies
specifically to that profile in the sequence and not to the entire sequence.
Typically, the user or application will set the rendering intent dynamically at
runtime or embedding time.”
RGB
Red, green and blue. A standard color model.
RIP
Raster Image Processor.
RTL
Raster Transfer Language (TRTL) is one of Hewlett-Packard's standard graphics
languages for plotters and printers. Produces raster data.
For More Terms, click on the Next Page Icon
Introduction
Media & Ink
Care of the Printer
Solutions
Installing Expansion
Cards
Term
Front Panel
Printer
Options
Specifications
Other
Ordering Accessories
Index
Glossary
Meaning
spindle
The rod which holds the roll of paper.
paper-axis
The vertical axis, as you look at the printer from the front in which the paper feed
moves.
scan-axis
The horizontal axis, as you look at the printer from the front in which the print
carriage moves.
service
station
The part of the printer which services the printheads. It keeps the printheads
clean and stops them from drying out.
USB
Universal Serial Bus
Introduction
Media & Ink
Solutions
A B C D E F G H I
Front Panel
A
accuracy calibration
acoustic specifications
Action Keys
adjusting page size
non-PostScript files
Adusting the Page Size in the Front Panel
Advanced Calibration
Aligning Printhead
ANSI Paper
Architectural Paper
Back Key
Banding
Best
Print Resolution
Blurred Lines
bright white inkjet paper
cable specifications
cables
interface
parallel
Calibration
Cancel Key
Cancel Print
C
Cancelling Drying Time
cancelling the drying time
canvas
choosing media
clear film
Clearing Media Jam
Clipped Images
clipped images
coated paper
Color Accuracy
Configuration
Additional Information
Problems
Settings
Internal Pen Palettes
Media
Color Alignment Problems
Color Consistency Problems
colors
internal palettes
Communications Problems
Component Identification
connections
controlling image quality
Correcting the Printer Configuration
Cutter Replacement
Index
Other
J K L M N O P Q R S T U V W X Y Z
Index
B
Printer
Options
D
Display Screen
Introduction
Media & Ink
Solutions
A B C D E F G H I
Dots per inch
Draft
double sided paper
Down Key
drivers
Drying Time
Cancelling
Procedure
Settings
Automatic
Manual
None
Typical
E
Front Panel
Printer
Options
Other
J K L M N O P Q R S T U V W X Y Z
Page Size Setting
functional specifications
G
graphics language
changing
graphics language and networks
H
F
Fast
Print Resolution
Finding the Source of a Problem
Form Feed & Cut Key
Front Panel
Action Keys
Display Screen
Introduction
Menu Structure
Navigation Keys
Handling Media
hard drive upgrade
heavy coated paper
high-gloss photo
HP Ink Supplies
HP No 10
HP No 11
HP No 82
Ink cartridges
ink cartridges
Printheads
printheads
When to Replace
ecological specifications
Enter Key
environmental specifications
Index
I
I/O time-out setting
changing
Identifying a Jobin a Queue
Identifying Components
Image Appearance
Image Clipping
Image Error
Introduction
Media & Ink
Solutions
A B C D E F G H I
Other
Index
J K L M N O P Q R S T U V W X Y Z
Image is Clipped
Long-Axis Image is Clipped
Output Contains Only a Partial Print
Print is Blank
Image is Clipped
Image is Unexpectedly Rotated
Image Quality
Problems
image quality
controlling
Image Rotation
Page Size
What is Rotated
Incomplete Lines Problems
Information
Roll Media
Sheet Media
Ink
System
Precautions
Ink Bleeds
Ink Cartridge
Problem Inserting
Replacement
Statistics
Ink cartridges
HP Ink Supplies
ink cartridges
HP Ink Supplies
Printer
Options
Front Panel
ink emulation mode
selecting
Ink Menu
Ink Supplies. See HP Ink Supplies
Ink Supply Problems
Ink System
Cartridge
Replacement
Statistics
Drying Time
Automatic
Manual
None
Printhead
Alignment
Replacement
Statistics
Inked Area
inked area
Installing
Roll Media
interface cables
interface specifications
interfaces
Fast Ethernet 10/100 base TX
parallel
USB
internal palettes
Internal Pen Palettes
Introduction
Media & Ink
Solutions
A B C D E F G H I
ISO Paper
J
Job Management Menu
K
Keys
Action
Cancel
Form Feed & Cut
Navigation
Back
Down
Enter
Menu
Up
L
Margins
margins
margins specifications
Marks or Scratches on Glossy Paper
matte film
Media
Loading
Roll Media
Sheet Media
Loading Roll Media Problems
Loading Sheet Media Problems
Long-Axis Image is Clipped
M
Cutter
Handling
Media Types
Additional Information
Combinations
Print Quality Selection
Roll
Installing
Loading
Removing from Printer
Removing from Spindle
Unloading
Sheet
Loading
Unloading
Which Edge First
Which Side Up
media
choice
media types
bright white inkjet paper
canvas
clear film
coated paper
double sided paper
heavy coated paper
high-gloss photo
matte film
natural tracing paper
Other
Index
J K L M N O P Q R S T U V W X Y Z
Printer
Options
Front Panel
Introduction
Media & Ink
Solutions
A B C D E F G H I
plain paper
supported
translucent bond
vellum
Media Problems
Blurred Lines
Clearing Jam
General Rules
Ink Bleeds
Loading
Roll Media
Sheetl Media
Marks or Scratches
Output
Warped Lines
media sizes specifications
media types
memory
memory specifications
memory upgrades
Menu
Ink
Job Mananagement
Paper
Menu Key
Menu Set-up
Menu Structure
merge
Mirror Image
natural tracing paper
Navigating the Menu System
Navigation
Example
Navigation Keys
Nesting
Automatic Rotation
Control
What Pages Qualify for Nesting
When does the Printer Try to Nest Pages
When Queueing is Off
nesting
and automatic rotation
and page size
and rotation
choosing the method
if queueing off
pages qualifying for
setting the space
turning on or off
wait time
when used
nesting pages
network interface
changing settings
networks and graphics language
non-PostScript files
Index
Other
J K L M N O P Q R S T U V W X Y Z
N
Printer
Options
Front Panel
Introduction
Media & Ink
Solutions
A B C D E F G H I
adjusting page size
Normal
Print Resolution
Printer
Options
Front Panel
Other
Index
J K L M N O P Q R S T U V W X Y Z
page size
adjusting
and clipped images
and nesting
O
Palette
Obtaining Roll Media Information
palettes
Obtaining Sheet Media Information
changing colors
One Image Overlays Another on Same Sheet
changing
pen width
operational specifications
internal
ordering accessories
Other Sources of Information for Incorrect Printed viewing current settings
paper
Image
important points
Output Contains Only a Partial Print
Paper
Menu
overlapping lines
parallel
(Bi-Tronics/Centronics) interface specificachanging treatment of
tions
P
parallel interface
Page Description
Pen Settings have No Effect
Page Format
pen widths
Inked Area
changing
Margins
Pens
Printing Area
physical specifications
Size
plain paper
page format
Pocket Guide
inked area
PostScript Upgrade
margins
power specifications
page size
print appearance
Page Format or Rotate have No Effect
controlling
Page Size
Print
Cancel
Nesting
Print Distorted or Unintelligible
Introduction
Media & Ink
Solutions
A B C D E F G H I
Front Panel
Problem Inserting
Problems after replacement
Replacement
Statistics
Printheads
HP Ink Supplies
printheads
HP Ink Supplies
Printing Area
printing area
Problems
Banding
Color Accuracy Configuration
Color Alignment
Color Consistency
Configuration Correction
Finding the Source
Image Quality
Incomplete Lines
Ink Supply
After replacement of Printhead
Inserting the Ink Cartridge
Inserting the Printhead
Solutions
Solving
Stepped Lines
Troubleshooting
Index
Other
J K L M N O P Q R S T U V W X Y Z
Print is a Mirror Image of Original
Print is Completely Blank
Print Quality
print quality
printing speeds and print quality
settings
Print Resolution
Best
Fast
Normal
print resolution
Printable Area
ArchitecturaI Paper
ISO Paper
Printed Image Incorrect
Image is in One Portion of the Printing Area
Image is Unexpectedly Rotated
One Image Overlays Another on Same Sheet
Other Sources of Information
Page Format or Rotate have No Effect
Pen Settings have No Effect
Print Distorted or Unintelligible
Print is a Mirror Image of Original
Printer Configuration
Graphics Language
Printer does not Print
Printer Seems Too Slow
Printhead
Alignment
Printer
Options
Introduction
Media & Ink
Solutions
A B C D E F G H I
Front Panel
Printer
Options
Other
J K L M N O P Q R S T U V W X Y Z
Q
Queue
Copying Jobs
Deleting Job
Description
Identifying Job
Job Priority
Management
Position
queue
deleting a job from
identifying a page in
making copies of a page in
page position in
printing a waiting file
prioritizing a job in
Queueing Turned OFF
Queueing Turned ON
R
recalibrating the printer Removing
Roll Media
from Printer
from Spindle
Repacking Poster
Replacing
Cutter
Ink Cartridge
Printhead
resolution specifications
resolution. See print resolution
Roll Media
Information
Installing
Loading
Removing from Printer
Removing from Spindle
Unloading
Rotating an Image
S
Index
Set-up Menu
Setup Poster
Sheet Media
Information
Loading
Unloading
Which Edge First
Which Side Up
software applications
Solutions to Problems
specifications
accuracy
acoustic
cables
ecological
environmental
Introduction
Media & Ink
Solutions
A B C D E F G H I
T
translucent bond
Troubleshooting
Procedure
types of media
Typical Drying Times
Typical Printing Times
U
Universal Serial Bus Unloading
Roll Media Sheet Media Up Key upgrading memory Other
Index
J K L M N O P Q R S T U V W X Y Z
functional
graphics languages supported
interface
margins
media sizes
memory
operational
parallel (Bi-Tronics/Centronics) interface
physical
power
resolution
Speed and Print Quality
Stepped Lines Problems
supported media types
Printer
Options
Front Panel
USB
user interface
User’s Reference Guide
animation
buttons
how to us
Navigation
next page button
previous page button
navigation
back button
exit button
home button
print button
related information
tabs
V
vellum W
Warped Lines
Web Page
When to Replace HP Ink Supplies
">