ROBO-679


Add to my manuals
1 Pages

advertisement

ROBO-679 | Manualzz
ROBO-679
Two DIMM Sockets
Intel® Pentium® III or Celeron® (FC-PGA2) processor
based PICMG SBC with VGA and Fast Ethernet
4MB Vedio Cache
Intel® 815E
Two IDE(Ultra ATA100)
Licensed BIOS
Serial Ports
FDD Port
Parallel Port
Intel® LAN
LAN/RJ45
USB port
PS/2 K/B & Mouse
VGA port
Extra Power Source
Socket 370
FEATURES
Battery
PCI to ISA Bridge
Intel® ICH2
PCI Extension Connector
Socket for DiskOnChip
GENERAL
Processor
CPU & Package: Intel® Pentium® III or Celeron® processor in the FC-PGA/FCPGA2 370 package
FSB: 133/100/66MHz
Chipset/Core Logic
Intel® 815E and ICH2
System Memory
Up to 512MB PC100/133 SDRAM on two 168-pin DIMM sockets
BIOS
Award BIOS
PC100/133MHz SDRAM for cost effective
memory support
Storage Devices
Support four EIDE devices with Ultra DMA 100/66/33
Solid State Disk
DOC socket for up to 288MB
n
4MB external display memory enable optimum
system memory utilization for maximum 2D/3D
graphics performance through Direct AGP
Watchdog Timer
- Programmable via software from 0.5 sec. to 254.5 min.
- Can be enabled/disabled by jumper
Expansion Interface
Proprietary PCI connection interface
n
On-board Intel 10BASE-T/100BASE-TX Fast
Ethernet for high speed data transfers
Hardware Monitoring
System monitor (fan, temperature, voltage)
Power Requirement
Typical: +5V@10A; +12V@200mA; -12V@30mA
n
Standard features for embedded system, like
H/W monitoring, WDT, SSD and Wake-On-LAN
Dimension
Dimension : 338.5(L) x 122(W) mm; 13.33"(L) x 4.8" (W)
PCB: 6-layer
n
Proprietary PCI connector for expansion
(optional daughter board provided, such as Ultra
160 SCSI or Fast Ethernet)
Environment
Operating Temperature: 0 to 55oC
Storage Temperature: -20 to 75oC
Relative Humidity: 5% to 95%, non-condensing
MTBF
108,051 hrs
n
One DOC socket for booting Windows NT directly
n
Reliable design for high-speed FC-PGA2 Intel®
Pentium® III or Celeron® processor
n
Intel® 815E chipset, backed by Intel® EID’s
long product life support
n
®
I/O
ORDERING GUIDE
Standard
Optional
ROBO-679
Pentium® III or Celeron® (FC-PGA2) processor based
PICMG SBC with VGA and Fast Ethernet
ROBO-U160
SCSI extension module with Portwell OmniPCITM
connection interface
ROBO-N100
Single Fast Ethernet port extension module with Portwell
OmniPCITM connection interface
21 SBC-ROBO-679
MIO
Two serial (selectable RS-232/422/485 x1), one parallel & up to two floppy disk
IrDA
IrDA 1.0
Ethernet
- 10BASE-T/100BASE-TX Ethernet
- IEEE 802.3u auto-negotiation support
- One RJ-45 connector
Audio
N/A
USB
Three USB ports (one on bracket)
Keyboard & Mouse
- One 6-pin mini-DIN connector for keyboard and mouse
- One 5-pin header for external keyboard connection
DISPLAY
Graphic Controller
Intel® GMCH integrated graphics controller
Graphic Memory
4MB display memory
Display Interface
Display resolution up to 1600x1200, 256 colors at refresh rate 85Hz

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement