advertisement
◉
Touch to zoom
Instructions: 1) Shut off power to the circuit at fuse box or circuit breaker. Remove wall plate and test to be sure power has been completely disconnected. 2) Remove old switch and outlet from wall box and disconnect wires. If metal tab between terminal screws was removed from old device, remove from new switch.* 3) Disconnect wires from old device. Be sure wires are stripped to 3/4". Form wires 3/4 around terminal screws [do not overlap). E Line B [if tab removed) 4) Connect wires to new switch as shown, forming wire clockwise 3/4 around screw. Tighten screws securely. Connect grounding (green or bare) wire to GREEN screw on new switch, and tighten screw. 5) Insert newly wired switch into the wall box. Fasten with mountin SCrews provided. 6) Attach a standard 2-outlet wall plate. Restore power. *Removable Tab
advertisement
Related manuals
advertisement