JVC LYT1147-001A Instruction manual

Master Page: Cover1
GR-DVP9Asia.book Page 1 Monday, February 10, 2003 1:12 PM
ENGLISH
AUTOMATIC
DEMONSTRATION
9
GETTING STARTED
10
VIDEO RECORDING &
PLAYBACK
17
DIGITAL STILL CAMERA
(D.S.C.) RECORDING &
PLAYBACK
23
ADVANCED FEATURES
31
REFERENCES
64
TERMS
82
DIGITAL VIDEO CAMERA
GR-DVP9
Please visit our Homepage on the World Wide
Web for Digital Video Camera:
http://www.jvc-victor.co.jp/english/cyber/
For Accessories:
http://www.jvc-victor.co.jp/english/accessory/
INSTRUCTIONS
LYT1147-001A
EN
Master Page: Left-Safety-Dummy
GR-DVP9Asia.book Page 2 Monday, February 10, 2003 1:12 PM
2 EN
Dear Customer,
Thank you for purchasing this digital video camera. Before use, please read the safety information and
precautions contained in the following pages to ensure safe use of this product.
Using This Instruction Manual
● All major sections are listed in the Table Of Contents on the cover page.
● Notes appear after most subsections. Be sure to read these as well.
● Basic and advanced features/operation are separated for easier reference.
It is recommended that you…
… refer to the Index (墌 pg. 76 – 81) and familiarise yourself with button locations, etc. before use.
… read thoroughly the Safety Precautions and Safety Instructions that follow. They contain extremely
important information regarding the safe use of this product.
You are recommended to carefully read the cautions on pages 70 through 72 before use.
SAFETY PRECAUTIONS
WARNING:
TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS
UNIT TO RAIN OR MOISTURE.
CAUTIONS:
● If you notice smoke or a peculiar smell coming
from the camcorder or AC Power Adapter/
Charger, shut it down and unplug it
immediately. Continue using the camcorder or
AC Power Adapter/Charger under these
conditions could lead to fire or electric shock.
Contact your JVC dealer. Do not attempt to
repair the malfunction yourself.
● To prevent shock, do not open the cabinet. No
user serviceable parts inside. Refer servicing to
qualified personnel.
● When you are not using the AC Power Adapter/
Charger for a long period of time, it is
recommended that you disconnect the power
cord from AC outlet.
NOTES:
● The rating plate (serial number plate) and safety
caution are on the bottom and/or the back of
the main unit.
● The rating plate (serial number plate) of the AC
Power Adapter/Charger is on its bottom.
Master Page: Right-Safety
GR-DVP9Asia.book Page 3 Monday, February 10, 2003 1:12 PM
EN
3
CAUTIONS:
● This camcorder is designed to be used with PAL-type colour television signals. It cannot be used for
playback with a television of a different standard. However, live recording and LCD monitor/viewfinder
playback are possible anywhere.
● Use the JVC BN-V107U/V114U battery packs and, to recharge them or to supply power to the camcorder
from an AC outlet, use the provided multi-voltage AC Power Adapter/Charger. (An appropriate
conversion adapter may be necessary to accommodate different designs of AC outlets in different
countries.)
When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all sides
to allow for ventilation (10 cm or more on both sides, on top and at the rear).
Do not block the ventilation holes.
(If the ventilation holes are blocked by a newspaper, or cloth etc. the heat may not be able to get out.)
No naked flame sources, such as lighted candles, should be placed on the apparatus.
When discarding batteries, environmental problems must be considered and the local rules or laws
governing the disposal of these batteries must be followed strictly.
The apparatus shall not be exposed to dripping or splashing.
Do not use this equipment in a bathroom or places with water.
Also do not place any containers filled with water or liquids (such as cosmetics or medicines, flower vases,
potted plants, cups etc.) on top of this unit.
(If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)
Master Page: Left-Safety
GR-DVP9Asia.book Page 4 Monday, February 10, 2003 1:12 PM
4 EN
SAFETY PRECAUTIONS
Do not point the lens or the viewfinder directly into the sun. This can cause eye injuries, as well as lead to the
malfunctioning of internal circuitry. There is also a risk of fire or electric shock.
CAUTION!
The following notes concern possible physical damage to the camcorder and to the user.
When carrying, be sure to always securely attach and use the provided strap. Carrying or holding the
camcorder by the viewfinder and/or the LCD monitor can result in dropping the unit, or in a malfunction.
Take care not to get your finger caught in the cassette holder cover. Do not let children operate the
camcorder, as they are particularly susceptible to this type of injury.
Do not use a tripod on unsteady or unlevel surfaces. It could tip over, causing serious damage to the
camcorder.
CAUTION!
Connecting cables (Audio/Video, etc.) to the camcorder and leaving it on top of the TV is not recommended,
as tripping on the cables will cause the camcorder to fall, resulting in damage.
Attach only the optional JVC VL-V3U Video Light, VL-F3U Flash, MZ-V3U Stereo Zoom Microphone or
MZ-V5U Stereo Microphone to the camcorder’s Info-Shoe.
䡲 This camcorder is designed exclusively for the digital video cassette, SD Memory Card and
MultiMediaCard. Only cassettes marked “
” and memory cards marked “
” or
“
” can be used with this unit.
Before recording an important scene…
… make sure you only use cassettes with the Mini DV mark
.
… make sure you only use memory cards with the mark
or
.
… remember that this camcorder is not compatible with other digital video formats.
… remember that this camcorder is intended for private consumer use only. Any commercial use without
proper permission is prohibited. (Even if you record an event such as a show, performance or exhibition for
personal enjoyment, it is strongly recommended that you obtain permission beforehand.)
Master Page: Right
GR-DVP9ASIA_03Acce.fm Page 5 Tuesday, March 4, 2003 9:56 PM
EN
5
Provided Accessories
● Battery Pack
BN-V107U-S
● AC Power Adapter/Charger
AA-V100EA, AA-V100A,
AA-V100SH or
AA-V100ED
● Remote Control Unit
RM-V717U
● USB Cable
● Memory Card 8 MB
(Already inserted in
the camcorder)
● CD-ROM
● AAA (R03) Battery x 2 (for
remote control unit)
● S/AV/Editing Cable
● Strap
(墌 pg. 7 for
attachment)
● DC Cord
● Grip Belt
(墌 pg. 6 for
attachment)
● Editing Extension Cable
● Audio Cable
(for connection of
optional headphones
墌 pg. 6)
NOTES:
● In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or
more core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to
the camcorder.
● Make sure to use the provided cables for connections. Do not use any other cables.
Master Page: Left
GR-DVP9Asia.book Page 6 Monday, February 10, 2003 1:12 PM
6 EN
How To Use The Audio Cable
When using optional headphones, connect to the
provided Audio cable (with a core filter attached),
then connect the Audio cable to the camcorder. The
core filter reduces interference.
3) Repeat the same procedure to attach the strap h
to the other eyelet.
Headphones
4) Connect the strap g and h and thread the strap
h through the buckle, then adjust the grip.
(墌 pg. 12)
Audio cable
(provided)
More than 2 cm
Core filter
To
(headphones)
How To Attach The Grip Belt
1) Remove the pad and separate the two straps.
2) Thread one end of the strap g through the eyelet,
then pass the other end through the loop.
g
h
5) Attach the pad.
Master Page: Right
GR-DVP9Asia.book Page 7 Monday, February 10, 2003 1:12 PM
EN
How To Attach The Strap
7
3) Adjust the length with the adjuster.
1) Thread one end of the strap through the eyelet,
then pass the other end through the loop.
2) Attach the screw to the tripod mounting socket.
To tighten the screw firmly, use a coin, etc.
NOTES:
● You can use the strap as a shoulder strap by
adjusting the length with the adjuster.
● Because the screw may cause damage to the
camcorder, make sure to attach the screw to the
tripod mounting socket when carrying the
camcorder.
● Use the strap only with this camcorder.
● Do not grip the camcorder too firmly when the
screw is attached. Doing so may cause damage to
the tripod mounting socket.
Master Page: Left-Heading0
GR-DVP9Asia.book Page 8 Monday, February 10, 2003 1:12 PM
8 EN
AUTOMATIC DEMONSTRATION
GETTING STARTED
CONTENTS
9
10
Power .......................................................................10
Grip Adjustment .......................................................12
Viewfinder Adjustment .............................................12
Tripod Mounting ......................................................12
LCD Monitor And Viewfinder ...................................12
Brightness Adjustment Of The Display ......................13
Operation Mode .......................................................13
Date/Time Settings ....................................................14
Loading A Cassette
/Unloading A Cassette ..........................................15
Loading A Memory Card
/Unloading A Memory Card .................................16
VIDEO RECORDING & PLAYBACK
17
VIDEO RECORDING ....................................................17
Basic Recording ........................................................17
Tape Remaining Time ...............................................17
Zooming ...................................................................18
Journalistic Shooting .................................................18
Interface Shooting .....................................................18
Time Code ................................................................19
Recording From The Middle Of A Tape ....................19
VIDEO PLAYBACK ......................................................20
Normal Playback ......................................................20
Still Playback ............................................................20
Shuttle Search ...........................................................21
Blank Search ............................................................21
Connections To A TV Or VCR ..................................22
DIGITAL STILL CAMERA (D.S.C.) RECORDING &
PLAYBACK
23
D.S.C. RECORDING .....................................................23
Basic Shooting (D.S.C. Snapshot) ..............................23
D.S.C. PLAYBACK .......................................................24
Normal Playback Of Images .....................................24
Auto Playback Of Images .........................................24
Playback Of Video Clips ...........................................25
Playback Of Digital Sound Effects .............................25
Index Playback Of Files ............................................26
Viewing File Information ..........................................26
Removing On-Screen Display ...................................26
Protecting Files .........................................................27
Deleting Files ...........................................................28
Resetting The File Name ...........................................29
Setting Print Information (DPOF Setting) ...................29
Initialising A Memory Card .......................................30
ADVANCED FEATURES
31
MENUS FOR DETAILED ADJUSTMENT .......................... 31
Changing The Menu Settings .................................... 31
RECORDING MENUS .................................................. 32
Wipe Or Fader Effects .............................................. 32
Program AE With Special Effects ............................... 33
White Balance Adjustment ....................................... 34
PLAYBACK MENUS ..................................................... 40
FEATURES FOR RECORDING ....................................... 41
Snapshot (For Video Recording) ............................... 41
Self-Timer ................................................................. 42
Auto Focus ............................................................... 43
Manual Focus ........................................................... 43
Exposure Control ...................................................... 44
Iris Lock ................................................................... 44
Backlight Compensation ........................................... 45
White Balance Adjustment ....................................... 45
Manual White Balance Adjustment .......................... 45
Recording Digital Sound Effects ................................ 46
NAVIGATION Function ........................................... 46
E-Mail Clip Recording .............................................. 48
DUBBING .................................................................. 50
Dubbing To Or From A VCR .................................... 50
Dubbing To A Video Unit Equipped With A DV IN
Connector (Digital Dubbing) ................................ 51
Dubbing From A Video Unit Equipped With A DV OUT
Connector (Digital Dubbing) ................................ 52
Dubbing Still Images Recorded On A Tape To A Memory
Card ..................................................................... 53
USING THE REMOTE CONTROL UNIT ........................... 54
Audio Dubbing ........................................................ 56
Audio Dubbing Using Digital Sound Effects ............. 56
Insert Editing ............................................................ 57
Random Assemble Editing [R.A.Edit] ........................ 58
SYSTEM CONNECTIONS .............................................. 62
Connection To A Personal Computer ....................... 62
Using The Camcorder As A WebCam ....................... 63
REFERENCE
64
DETAILS .................................................................... 64
TROUBLESHOOTING ................................................... 65
CAUTIONS ................................................................. 70
USER MAINTENANCE .................................................. 73
SPECIFICATIONS ........................................................ 74
INDEX ....................................................................... 76
TERMS
82
Master Page: Right-start
GR-DVP9Asia.book Page 9 Monday, February 10, 2003 1:12 PM
Automatic Demonstration
Automatic Demonstration takes place when “DEMO
MODE” is set to “ON” (factory-preset).
SET/SELECT Button
MENU Button
+, – Button
9
䡲 Automatic Demonstration starts when there is no
operation for about 3 minutes after the Power
Switch is set to “A” or “M” and no cassette is in
the camcorder.
䡲 Performing any operation during the
demonstration stops the demonstration
temporarily. If no operation is performed for more
than 3 minute after that, the demonstration will
resume.
䡲 “DEMO MODE” remains “ON” even if the
camcorder power is turned off.
To cancel Automatic Demonstration
Power Switch
Lock Button
Sub Menu
SY ST EM
DEMO MODE – OFF
ON
1
Set the Power Switch to “M” while pressing down
the Lock Button located on the switch.
2
Open the LCD monitor fully, or pull out the
viewfinder fully.
3
4
Press MENU. The Menu Screen appears.
Press + or – to select “s SYSTEM”, and press
SET/SELECT. The SYSTEM Menu appears.
5
Press + or – to select “DEMO MODE”, and press
SET/SELECT. The Sub Menu appears.
6
Press + or – to select “OFF”, and press SET/
SELECT.
7
Press + or – to select “BRETURN”, and press SET/
SELECT twice. The normal screen appears.
NOTE:
Slide the lens cover down to see the actual changes
of the Automatic Demonstration activated on the
LCD monitor or viewfinder.
AUTOMATIC DEMONSTRATION
EN
Master Page: Left-start
GR-DVP9Asia.book Page 10 Monday, February 10, 2003 1:12 PM
10 EN
Power
This camcorder’s 2-way power supply system lets
you choose the most appropriate source of power.
Do not use provided power supply units with other
equipment.
● If the battery operation time remains extremely
short even after having been fully charged, the
battery is worn out and needs to be replaced.
Please purchase a new one.
● For other notes, 墌 pg. 64.
About Batteries
Charging The Battery Pack
GETTING STARTED
1
Make sure you unplug the camcorder’s DC cord
from the AC Power Adapter/Charger.
2
Plug the AC Power Adapter/Charger’s power cord
into an AC outlet. The POWER indicator lights.
3
Attach the battery pack with the YZ mark
aligned with the corresponding marks on the AC
Power Adapter/Charger. The CHARGE indicator
begins blinking to indicate charging has started.
4
When the CHARGE indicator stops blinking but
stays lit, charging is finished. Remove the battery
pack by pushing up the protruding part.
5
Unplug the AC Power Adapter/Charger’s power
cord from the AC outlet.
POWER
indicator
(red)
Battery
CHARGE pack
indicator
(green)
Protruding part
To AC outlet
Lithium-ion is vulnerable in colder temperatures.
DANGER! Do not attempt to take the batteries apart,
or expose them to flame or excessive heat, as it may
cause a fire or explosion.
WARNING! Do not allow the battery or its terminals
to come in contact with metals, as this can result in
a short circuit and possibly start a fire.
Battery pack
Charging time
BN-V107U
Approx. 1 hr. 30 min.
The Benefits Of Lithium-Ion Batteries
Lithium-ion battery packs are small but have a large
power capacity. However, when one is exposed to
cold temperatures (below 10°C), its usage time
becomes shorter and it may cease to function. If this
happens, place the battery pack in your pocket or
other warm, protected place for a short time, then
re-attach it to the camcorder. As long as the battery
pack itself is not cold, it should not affect
performance.
(If you’re using a heating pad, make sure the battery
pack does not come in direct contact with it.)
BN-V114U
(optional)
Approx. 2 hr.
For other notes, 墌 pg. 64.
AC Power Adapter/
Charger
DC OUT connector
NOTES:
● If the protective cap is attached to the battery
pack, remove it first.
● If you connect the camcorder’s DC cord to the AC
Power Adapter/Charger during battery charging,
power is supplied to the camcorder and charging
stops.
● When charging the battery pack for the first time
or after a long storage period, the CHARGE
indicator may not light. In this case, remove the
battery pack from the AC Power Adapter/Charger,
then try charging again.
Master Page: Right
GR-DVP9Asia.book Page 11 Monday, February 10, 2003 1:12 PM
EN
Notches
BATT. RELEASE
Switch
1
Align the battery pack’s two notches with the tabs
on the camcorder’s battery pack mount.
2
Insert the terminal end 1 of the battery pack into
the battery pack mount.
3
Firmly push the end 2 of the battery pack until it
locks into place.
To detach the battery pack...
While sliding down BATT. RELEASE, remove it.
INFORMATION:
The optional extended-use battery pack kit is a set
composed of a battery pack and AC Power Adapter/
Charger:
VU-V840 KIT: BN-V840U battery pack & AA-V15
AC Power Adapter/Charger
VU-V856 KIT: BN-V856U battery pack & AA-V80
AC Power Adapter/Charger
Read the kit’s instruction manual before using.
Also, by using the optional JVC VC-VBN856U DC
Cord, it will be possible to connect BN-V840U or
BN-V856U battery packs to the camcorder and
supply power directly to the camcorder.
Using AC Power
To AC outlet
Power cord
AC Power Adapter/
Charger
POWER indicator
(red)
To DC OUT
connector
NOTE:
When using the battery pack and the S/AV/Editing
cable, disconnect the S/AV/Editing cable first
(墌 pg. 22), and then detach the battery pack.
Maximum continuous recording time
Battery pack LCD monitor on Viewfinder on
BN-V107U
1 hr.
1 hr. 10 min.
BN-V114U
(optional)
2 hr.
2 hr. 20 min.
BN-V840U
(optional)
5 hr. 10 min.
6 hr.
1
BN-V856U
(optional)
Make sure you unplug the camcorder’s DC cord
from the AC Power Adapter/Charger.
7 hr. 40 min.
9 hr. 10 min.
2
Plug the AC Power Adapter/Charger’s power cord
into an AC outlet. The POWER indicator lights.
3
Attach the coupler part of the DC cord to the
camcorder’s battery pack mount.
4
Plug the DC cord to the DC OUT connector on
the AC Power Adapter/Charger.
DC cord
To battery pack mount
NOTES:
● Recording time is reduced significantly under the
following conditions:
• Zoom or Record-Standby mode is engaged
repeatedly.
• The LCD monitor is used repeatedly.
• The playback mode is engaged repeatedly.
● Before extended use, it is recommended that you
prepare enough battery packs to cover 3 times the
planned shooting time.
ATTENTION:
Before detaching the power source, make sure
that the camcorder’s power is turned off. Failure to
do so can result in a camcorder malfunction.
NOTES:
● The provided AC Power Adapter/Charger features
automatic voltage selection in the AC range from
110 V to 240 V.
● For other notes, 墌 pg. 64.
GETTING STARTED
Using The Battery Pack
11
Master Page: Left-Heading0
GR-DVP9Asia.book Page 12 Monday, February 10, 2003 1:12 PM
12 EN
Grip Adjustment
Tripod Mounting
1
2
Loosen the belt.
3
Adjust your thumb and fingers through the grip to
easily operate the Recording Start/Stop Button,
Power Switch and Power Zoom (SHUTTLE
SEARCH) Ring. Be sure to tighten the belt to your
preference.
Pass your right hand through the loop and grasp
the grip.
Viewfinder Adjustment
1
Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch.
2
3
Pull out the viewfinder fully.
Turn the Dioptre Adjustment Control until the
indications in the viewfinder are clearly focused.
Align the screw on the tripod with the camcorder’s
mounting socket. Then tighten the screw.
● Some tripods are not equipped with studs.
CAUTION:
When attaching the camcorder to a tripod, extend
its legs to stabilise the camcorder. It is not advised
to use small sized tripods. This may cause damage
to the unit by falling over.
LCD Monitor And Viewfinder
While using the LCD monitor:
Make sure the viewfinder is pushed back in. Open
the LCD monitor fully. It can rotate 270º (90º
downward, 180º upward).
While using the viewfinder:
Make sure the LCD monitor is closed and locked.
Pull out the viewfinder fully.
● Be sure to pull out the viewfinder until you hear a
click, otherwise it may be pushed back in during
use.
180˚
90˚
PAUSE
Dioptre Adjustment
Control
NOTES:
● The image will not appear simultaneously on the
LCD monitor and the viewfinder except during
Interface Shooting. (墌 pg. 18)
When the viewfinder is pulled out while the LCD
monitor is opened, you can select which one to
use. Set “PRIORITY” to the desired mode in
SYSTEM Menu. (墌 pg. 31, 38)
● Coloured bright spots may appear all over the LCD
monitor or the viewfinder. However, this is not a
malfunction. (墌 pg. 69)
Master Page: Right
GR-DVP9Asia.book Page 13 Monday, February 10, 2003 1:12 PM
EN
Press MONITOR BRIGHT + or – until the bright
level indicator on the display moves and the
appropriate brightness is reached.
● It is also possible to adjust the brightness of the
viewfinder.
MONITOR BRIGHT +/–
M (Manual Recording):
Allows you to set various recording functions
using the Menus. (墌 pg. 31)
If you want more creative capabilities than Full
Auto Recording, try this mode.
There is no indication on the display.
OFF:
Allows you to switch off the camcorder.
BR I GHT
Operation Mode
To turn on the camcorder, set the Power Switch to
any operation mode except “OFF” while pressing
down the Lock Button located on the switch.
Power Lamp
Power Switch Position
A (Full Auto Recording):
Allows you to record using NO special effects or
manual adjustments. Suitable for standard
recording.
The “A” indicator appears on the display.
VIDEO/MEMORY Switch
P:
● Allows you to play back a recording on the tape.
● Allows you to play back a video clip on the
memory card.
● Allows you to play back a digital sound effect in
the memory card.
● Allows you to display a still image stored in the
memory card or to transfer a still image stored in
the memory card to a PC.
● Allows you to set various playback functions
using the Menus. (墌 pg. 31)
Power Switch
VIDEO/MEMORY Switch Position
Lock Button
Choose the appropriate operation mode according
to your preference using the Power Switch and
VIDEO/MEMORY Switch.
VIDEO:
Allows you to record on a tape or play back a
tape. If “REC SELECT” is set to “
/
”
(墌 pg. 39), still images are recorded both on the
tape and the memory card.
MEMORY:
● Allows you to record in a memory card or
access data stored in a memory card.
● When the Power Switch is set to “A” or “M”, the
currently selected image size appears.
Power-Linked Operation
When the Power Switch is set to “A” or “M”, you
can also turn on/off the camcorder by opening/
closing the LCD monitor or pulling out/pushing in
the viewfinder.
GETTING STARTED
Brightness Adjustment Of The
Display
13
Master Page: Left
GR-DVP9Asia.book Page 14 Monday, February 10, 2003 1:12 PM
14 EN
Built-in Clock’s Rechargeable Lithium Battery
Date/Time Settings
The date/time is recorded onto the tape at all times,
but its display can be turned on or off during
playback. (墌 pg. 31, 41)
SET/SELECT Button
MENU Button
+, – Button
Power Lamp
Power Switch
Lock Button
1
Set the Power Switch to “M” while pressing down
the Lock Button located on the switch.
2
Open the LCD monitor fully, or pull out the
viewfinder fully.
3
Press MENU. The Menu
Screen appears.
4
Press + or – to select
“n DISPLAY”, and press
SET/SELECT. The CAMERA
DISPLAY Menu appears.
5
Press + or – to select
RETURN
“CLOCK ADJ.”, and press
SET/SELECT. The
parameter for “Day” is highlighted.
6
Press + or – to input the
day, and press SET/
SELECT. Repeat to input
the month, year, hour and
minute.
7
W I PE / F AD E R
OF F
FADE R –WH I T E
FADE R – B LAC K
FADE R – B .W
W I PE – CO RNE R
W I PE –W I NDOW
W I PE – S L I DE
W I PE – DOOR
W I PE – S C ROL L
W I PE – S H UT T E R
CAMERA D I S PLAY
ON S CRE E N – LCD / T V
DA T E / T I ME – AU T O
T I ME CODE – OF F
CL OCK
2 0 . 12 . 03
17 : 3 0
AD J .
CAMERA D ISPLAY
CL OCK
AD J .
RETURN
2 0 . 12 . 03
17 : 3 0
Press + or – to select
“BRETURN”, and press
SET/SELECT twice. The Menu Screen closes.
To store the date/time in memory, the clock’s
rechargeable lithium battery is integrated in the
camcorder. While the camcorder is connected to an
AC outlet using the AC Power Adapter/Charger, or
while the battery pack attached to the camcorder
continues to supply power, the clock’s rechargeable
lithium battery is always charged. However, if the
camcorder is not used for approx. 3 months, the
clock’s lithium battery will become discharged and
the date/time stored in memory will be lost. When
this occurs, first connect the camcorder to an AC
outlet using the AC Power Adapter/Charger for over
24 hours to charge the clock’s rechargeable lithium
battery. Then perform the date/time setting before
using the camcorder.
Note that the camcorder can be used without setting
the date/time.
NOTE:
Even if you select “CLOCK ADJ.”, if the parameter is
not highlighted, the camcorder’s internal clock
continues to operate. Once you move the highlight
bar to the first date/time parameter (day), the clock
stops. When you finish setting the minute and press
SET/SELECT, the date and time begin operation from
the date and time you have just set.
Master Page: Right
GR-DVP9Asia.book Page 15 Monday, February 10, 2003 1:12 PM
EN
The camcorder needs to be powered up to load or
eject a cassette.
1
Slide down and hold OPEN/EJECT in the
direction of the arrow, then pull the cassette
holder cover open until it locks. The cassette
holder opens automatically.
● Do not touch internal components.
2
Insert or remove a tape and press “PUSH HERE”
to close the cassette holder.
● Be sure to press only the section labelled
“PUSH HERE” to close the cassette holder;
touching other parts may cause your finger to
get caught in the cassette holder, resulting in
injury or product damage.
● Once the cassette holder is closed, it recedes
automatically. Wait until it recedes completely
before closing the cassette holder cover.
● When the battery pack’s charge is low, you
may not be able to close the cassette holder
cover. Do not apply force. Replace the battery
pack with a fully charged one or use AC power
before continuing.
3
Close the cassette holder cover firmly until it
locks into place.
Cassette holder cover
Cassette holder
Make sure the
window side is
facing out.
Erase protection tab
PUSH HERE
OPEN/EJECT Switch
To protect valuable recordings…
Slide the erase protection tab on the back of the tape
in the direction of “SAVE”. This prevents the tape
from being recorded over. To record on this tape,
slide the tab back to “REC” before loading it.
Approximate recording time
Tape
Recording mode
SP
LP
30 min.
30 min.
45 min.
60 min.
60 min.
90 min.
80 min.
80 min.
120 min.
To switch the recording mode, refer to pages 31 and
34.
NOTES:
● It takes a few seconds for the cassette holder to
open. Do not apply force.
● If you wait a few seconds and the cassette holder
does not open, close the cassette holder cover and
try again. If the cassette holder still does not open,
turn the camcorder off then on again.
● If the tape does not load properly, open the
cassette holder cover fully and remove the
cassette. A few minutes later, insert it again.
● When the camcorder is suddenly moved from a
cold place to a warm environment, wait a short
time before opening the cassette holder cover.
● Closing the cassette holder cover before the
cassette holder recedes may cause damage to the
camcorder.
● Even when the camcorder is switched off, a
cassette can be loaded or unloaded. After the
cassette holder is closed with the camcorder
switched off, however, it may not recede. It is
recommended to turn the power on before
loading or unloading.
● When resuming recording, once you open the
cassette holder cover a blank portion will be
recorded on the tape or a previously recorded
scene will be erased (recorded over) regardless of
whether the cassette holder came out or not. See
“Recording From The Middle Of A Tape”
(墌 pg. 19).
GETTING STARTED
Loading A Cassette
/Unloading A Cassette
15
Master Page: Left
GR-DVP9Asia.book Page 16 Monday, February 10, 2003 1:12 PM
16 EN
Loading A Memory Card
/Unloading A Memory Card
To protect valuable files (available only for SD
Memory Card)…
Write/erase protection tab
The provided memory card is already inserted in the
camcorder at the time of purchase.
Card Cover
Clipped edge
Memory card
Label
1
2
3
Make sure the camcorder’s power is off.
4
Close the card cover.
Open the card cover.
To load a memory card, firmly insert it with its
clipped edge first.
To unload a memory card, push it once. After the
memory card comes out of the camcorder, pull it
out.
● Do not touch the terminal on the reverse side
of the label.
Slide the write/erase protection tab on the side of the
memory card in the direction of “LOCK”. This
prevents the memory card from being recorded over.
To record on this memory card, slide the tab back to
the position opposite to “LOCK” before loading it.
NOTES:
● Be sure to use only SD Memory Cards marked
“
” or MultiMediaCards marked
“
”.
● Some brands of memory cards are not compatible
with this camcorder. Before purchasing a memory
card, consult its manufacturer or dealer.
● Before using a new memory card, it is necessary to
FORMAT the card. (墌 pg. 30)
ATTENTION:
Do not insert or remove the memory card while the
camcorder is turned on, as this may cause the
memory card to be corrupted or cause the
camcorder to become unable to recognise whether
or not the card is installed.
Master Page: Right-start
GR-DVP9Asia.book Page 17 Monday, February 10, 2003 1:12 PM
VIDEO RECORDING
NOTE:
Before continuing, perform the procedures listed
below:
● Power (墌 pg. 10)
● Loading A Cassette (墌 pg. 15)
Power Lamp
VIDEO/MEMORY Switch
Recording Start/
Stop Button
Power Switch
Lock Button
Tally Lamp
(Lights while recording is in
progress.)
17
NOTES:
● The image will not appear simultaneously on the
LCD monitor and the viewfinder except during
Interface Shooting. (墌 pg. 18)
● If the Record-Standby mode continues for
5 minutes, the camcorder’s power shuts off
automatically. To turn the camcorder on again,
push back and pull out the viewfinder again or
close and re-open the LCD monitor.
● LCD monitor/viewfinder indications:
• When power is supplied from a battery: the
“
” battery indicator is displayed. (墌 pg. 80)
• When power is supplied from an AC outlet: the
“
” battery indicator does not appear.
● When a blank portion is left between recorded
scenes on the tape, the time code is interrupted
and errors may occur when editing the tape. To
avoid this, refer to “Recording From The Middle
Of A Tape” (墌 pg. 19).
● To turn the tally lamp or beep sounds off,
墌 pg. 31, 37.
● To record in LP (Long Play) mode, 墌 pg. 31, 34.
● For other notes, 墌 pg. 64.
Tape Remaining Time
Approximate tape remaining time appears on the
display. “– h – – m” means the camcorder is
calculating the remaining time. When the remaining
time reaches 2 minutes, the indication starts
blinking.
0h 25 m
Lens Cover (Slide up the
lens cover to protect the
lens when the camcorder is
not in use.)
– h– – m
1h 0m
0h59m
0h 3m
(Now calculating)
1
2
3
Slide down the lens cover.
4
Open the LCD monitor fully, or pull out the
viewfinder fully.
● The power lamp lights and the camcorder
enters the Record-Standby mode. “PAUSE” is
displayed.
5
To start recording, press the Recording Start/Stop
Button. The tally lamp lights and “T REC”
appears on the display while recording is in
progress.
6
To stop recording, press the Recording Start/Stop
Button again. The camcorder re-enters the
Record-Standby mode.
Set the VIDEO/MEMORY Switch to “VIDEO”.
Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch.
0h 0m
0h 1m
0h 2m
(Blinking)
(Blinking)
(Blinking)
VIDEO RECORDING & PLAYBACK
Basic Recording
EN
Master Page: Left
GR-DVP9Asia.book Page 18 Monday, February 10, 2003 1:12 PM
18 EN
VIDEO RECORDING (cont.)
Zooming
Journalistic Shooting
Produces the zoom in/out effect, or an instantaneous
change in image magnification.
In some situations, different
shooting angles may provide
more dramatic results. Hold
the camcorder in the desired
position and tilt the LCD
monitor in the most
convenient direction. It can
rotate 270º (90º downward,
180º upward).
Zoom In
Turn the Power Zoom (SHUTTLE SEARCH) Ring
towards “T”.
Zoom Out
Turn the Power Zoom (SHUTTLE SEARCH) Ring
towards “W”.
● The further you turn the Power Zoom Ring, the
quicker the zoom action.
Zoom in (T: Telephoto)
1 xW
T
1 0 xW
T
20xW
T
40xW
T
Zoom out (W: Wide angle)
10x W
T
Digital zoom zone
10X (optical) zoom zone
Approximate zoom ratio
NOTES:
● Focusing may become unstable during Zooming.
In this case, set the zoom while in RecordStandby, lock the focus by using the manual focus
(墌 pg. 43), then zoom in or out in Record mode.
● Zooming is possible to a maximum of 200X, or it
can be switched to 10X magnification using the
optical zoom. (墌 pg. 35)
● Zoom magnification of over 10X is done through
Digital image processing, and is therefore called
Digital Zoom.
● During Digital zoom, the quality of image may
suffer.
● Digital zoom cannot be used when the VIDEO/
MEMORY Switch is set to “MEMORY”.
● Macro shooting (as close as approx. 5 cm to the
subject) is possible when the Power Zoom Ring is
set all the way to “W”. Also see “TELE MACRO” in
MANUAL Menu on page 36.
● For other notes, 墌 pg. 64.
Interface Shooting
The person you shoot
Self Recording
can view himself/
herself in the LCD
monitor, and you can
even shoot yourself
while viewing your
own image in the LCD
monitor.
1) Open the LCD monitor and tilt it upward to 180º
so that it faces forward.
● When the LCD monitor is tilted upward to an
angle of over approx. 105º, the monitor image
is inverted vertically. If the viewfinder is pulled
out at that time, it also switches on.
2) Point the lens toward the subject (yourself when
self-recording) and start recording.
● During Interface Shooting, the monitor image
and indications do not appear inverted as they
would when viewing a mirror.
Master Page: Right
GR-DVP9Asia.book Page 19 Monday, February 10, 2003 1:12 PM
EN
19
Time Code
Recording From The Middle Of A Tape
During recording, a time code is recorded on the
tape. This code is to confirm the location of the
recorded scene on the tape during playback.
If recording starts from a blank portion, the time
code begins counting from “00:00:00”
(minute:second:frame). If recording starts from the
end of a previously recorded scene, the time code
continues from the last time code number.
To perform Random Assemble Editing (墌 pg. 58 –
61), time code is necessary. If during recording a
blank portion is left partway through the tape, the
time code is interrupted. When recording is
resumed, the time code starts counting up again
from “00:00:00”. This means the camcorder may
record the same time codes as those existing in a
previously recorded scene. To prevent this, perform
“Recording From The Middle Of A Tape” (墌 pg. 19)
in the following cases;
● When shooting again after playing back a
recorded tape.
● When power shuts off during shooting.
● When a tape is removed and re-inserted during
shooting.
● When shooting using a partially recorded tape.
● When shooting on a blank portion located
partway through the tape.
● When shooting again after shooting a scene then
opening/closing the cassette holder cover.
1) Play back a tape or use Blank Search (墌 pg. 21)
to find the spot at which you want to start
recording, then engage the Still Playback mode.
(墌 pg. 20)
2) Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch, then start recording.
Frames are not displayed
during recording.
Minutes
Seconds
12 : 34 : 24
Frames
(25 frames = 1 second)
When a blank portion is recorded on a tape
Time code
00:00:00
Time code Time code
05:43:21 00:00:00
Already
Tape recorded scene
Shooting start
point
Blank
Newly recorded
scene
Shooting stop Shooting start
point point
Proper recording
Time code
00:00:00
Time code Time code
05:43:21 05:44:00
Already
Tape recorded scene
Shooting start
point
New
scene
Latest scene
Shooting start Shooting start
point point
VIDEO RECORDING & PLAYBACK
Display
NOTES:
● The time code cannot be reset.
● During fast-forwarding and rewinding, the time
code indication does not move smoothly.
● The time code is displayed only when “TIME
CODE” is set to “ON”. (墌 pg. 38)
Master Page: Left-Heading0
GR-DVP9Asia.book Page 20 Monday, February 10, 2003 1:12 PM
20 EN
VIDEO PLAYBACK
Normal Playback
VOL. +/– Button
VIDEO/MEMORY Switch
Play/Pause Button
(4/9)
Power Switch
● LCD monitor/viewfinder indications:
• When power is supplied from a battery: the
“
” battery indicator is displayed. (墌 pg. 80)
• When power is supplied from an AC outlet: the
“
” battery indicator does not appear.
● When the S/AV/Editing cable is connected to the
S/AV connector, the sound is not heard from the
speaker.
To control the speaker volume…
Press VOL. + to turn up the volume, or VOL. – to
turn down the volume.
Still Playback
Lock Button
Speaker
Stop Button (8)
SHUTTLE SEARCH Ring
(3/5)
MENU Button
SET/SELECT
Button
1
2
3
Load a cassette. (墌 pg. 15)
4
5
To start playback, press 4/9.
Set the VIDEO/MEMORY Switch to “VIDEO”.
Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
To stop playback, press 8.
● During Stop mode, turn the SHUTTLE SEARCH
Ring to the left (3) to rewind, or to the right
(5) to fast-forward the tape.
NOTES:
● Clean the video heads using an optional dry
cleaning cassette when:
• No picture during playback.
• Blocks of noise appear during playback.
For details, 墌 pg. 72.
● If Stop mode continues for 5 minutes when power
is supplied from a battery, the camcorder shuts off
automatically. To turn on again, set the Power
Switch to “OFF”, then to “P”.
● The playback picture can be viewed in the LCD
monitor, viewfinder or on a connected TV.
(墌 pg. 22)
● You can also view the playback picture on the
LCD monitor with it flipped over and pushed
against the camcorder body.
Pauses during video playback.
1) Press 4/9 during playback.
2) To resume normal playback, press 4/9 again.
● If still playback continues for more than about
3 minutes, the camcorder’s Stop mode is
automatically engaged.
● When 4/9 is pressed, the image may not
pause immediately while the camcorder
stabilises the still image.
Master Page: Right
GR-DVP9Asia.book Page 21 Monday, February 10, 2003 1:12 PM
EN
Allows high-speed search in either direction during
video playback.
1) During playback, turn the SHUTTLE SEARCH
Ring to the right (5) for forward search, or to
the left (3) for reverse search.
2) To resume normal playback, press 4/9.
● During playback, turn the SHUTTLE SEARCH
Ring to the right (5) or to the left (3) and
hold it. The search continues as long as you
hold the ring. Once you release the ring,
normal playback resumes.
● A slight mosaic effect appears on the display
during Shuttle Search. This is not a
malfunction.
ATTENTION:
During Shuttle Search, parts of
the picture may not be clearly
visible, particularly on the left
side of the screen.
Blank Search
Helps you find where you should start recording in
the middle of a tape to avoid time code interruption.
(墌 pg. 19)
1
2
3
Load a cassette. (墌 pg. 15)
4
Press MENU. The
Menu Screen appears.
5
Press + or – to select
“t”, and press SET/
SELECT. The VIDEO
Menu appears.
Set the VIDEO/MEMORY Switch to “VIDEO”.
Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
V I D EO
SOUND MOD E – ST E RE O
1 2 b i t MOD E – SOUND 1
SY NCHRO
– ±0 . 0
RE C MOD E –
COP Y – OF F
NA V I . DE L .
BL ANK S RCH
S / A V I N PU T – OF F
RETURN
6
Press + or – to select
“BLANK SRCH”, and
press SET/SELECT.
The Sub Menu
appears.
V I D EO
SOUND MOD E – ST E RE O
1 2 b i t MOD E – SOUND 1
SY NCHRO
– ±0 . 0
RE C MOD E –
COP Y – OF F
NA V I . DE L
BL ANK S RCH E X E CU T E
S / A V I N PU T – R E T UR N
RETURN
Press + or – to select
“EXECUTE”, and
press SET/SELECT.
BLANK SEARCH
● The “BLANK
PUSH "STOP" BUTON
TO CANCEL
SEARCH”
indication appears
and the camcorder
automatically starts
reverse or forward search, then stops at the
spot which is about 3 seconds of tape before
the beginning of the detected blank portion.
● To cancel Blank Search midway, press 8.
NOTES:
● In step 7, if the current position is at a blank
portion, the camcorder searches in the reverse
direction. If the current position is at a recorded
portion, the camcorder searches in the forward
direction.
● Blank Search does not work if “HEAD CLEANING
REQUIRED. USE CLEANING CASSETTE” has
appeared with the tape.
● If the beginning or end of the tape is reached
during Blank Search, the camcorder stops
automatically.
● A blank portion which is shorter than 5 seconds of
tape may not be detected.
● The detected blank portion may be located
between recorded scenes. Before you start
recording, make sure there is no recorded scene
after the blank portion.
Slow-Motion Playback
Frame-By-Frame Playback
Playback Zoom
Playback Special Effects
Available only with the remote control (provided).
(墌 pg. 55)
VIDEO RECORDING & PLAYBACK
7
Shuttle Search
21
Master Page: Left
GR-DVP9Asia.book Page 22 Monday, February 10, 2003 1:12 PM
22 EN
VIDEO PLAYBACK (cont.)
Connections To A TV Or VCR
These are some basic types of connections. When
making the connections, refer also to your VCR and
TV instruction manuals.
To S/AV connector
S/AV/Editing cable
(provided)
Connector
Cover****
A
B
C
D
E
VCR
TV
A
B
C
D
E
Not connected
Black to S-VIDEO IN*
Yellow to VIDEO IN**
White to AUDIO L IN***
Red to AUDIO R IN***
*
Connect when your TV/VCR has S-VIDEO IN
and A/V input connectors. In this case, it is not
necessary to connect the yellow video cable.
** Connect when your TV/VCR has only A/V input
connectors.
*** Not required for watching still images only.
**** When connecting the cable, open the cover.
1
2
To choose whether or not the following displays
appear on the connected TV…
● Date/Time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.
(墌 pg. 31, 41)
Or, press DISPLAY on the remote control to turn
on/off the date indication.
● Time Code
Set “TIME CODE” to “ON” or “OFF”.
(墌 pg. 31, 41)
● Indications other than date/time and time code
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”.
(墌 pg. 31, 41)
NOTES:
● It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the
battery pack. (墌 pg. 11)
● To monitor the picture and sound from the
camcorder without inserting a tape or memory
card, set the camcorder’s Power Switch to “A” or
“M”, then set your TV to the appropriate input
mode.
● Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
● If you have a TV or speakers that are not specially
shielded, do not place the speakers adjacent to the
TV as interference will occur in the camcorder
playback picture.
● While the S/AV/Editing cable is connected to the
S/AV connector, sound cannot be heard from the
speaker.
● How to connect the S/AV/Editing cable...
• Insert the cable straight into the S/AV
connector.
• To disconnect the S/AV/Editing cable, pull the
cable straight out.
Make sure all units are turned off.
To S/AV connector
Connect the camcorder to a TV or VCR as shown
in the illustration.
S/AV/Editing cable
(provided)
If using a VCR, go to step 3.
If not, go to step 4.
3
Connect the VCR output to the TV input,
referring to your VCR’s instruction manual.
4
5
Turn on the camcorder, the VCR and the TV.
Set the VCR to its AUX input mode, and set the
TV to its VIDEO mode.
Master Page: Right-start
GR-DVP9Asia_06DSC.fm Page 23 Thursday, March 6, 2003 9:25 AM
D.S.C. RECORDING
EN
Basic Shooting (D.S.C. Snapshot)
A
1024
Power Switch
Lock Button
SNAPSHOT Button
1
2
3
Slide down the lens cover.
4
Open the LCD monitor fully, or pull out the
viewfinder fully.
5
Press SNAPSHOT. The “O” indication
appears while the snapshot is being taken.
● Still images are recorded in the snapshot mode
with no frame.
● To delete unwanted still images, refer to
“Deleting Files” (墌 pg. 28).
● When you do not want to hear the shutter
sound, set “BEEP” to “OFF”. (墌 pg. 31, 37)
● To change the Image Size and/or Picture
Quality, 墌 pg. 31, 39.
Set the VIDEO/MEMORY Switch to “MEMORY”.
Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch.
Snapshot mode with no
frame
There is the sound of a
shutter closing.
A
B
C
D
E
C
DE
Image Size (墌 pg. 39, 78)
Shooting Icon (墌 pg. 78)
Card Icon (墌 pg. 78)
Picture Quality (墌 pg. 39, 78)
Remaining Number Of Shots (墌 pg. 78)
NOTES:
● Even if “DIS” is set to “ON” (墌 pg. 36), the
Stabiliser will be disabled.
● If Program AE with special effects (墌 pg. 33) is
engaged, certain modes of Program AE with
special effects are disabled during Snapshot
recording. In such a case, the icon blinks.
● If shooting is not performed for approx. 5 minutes
when the Power Switch is set to “A” or “M” and
power is supplied from the battery pack, the
camcorder shuts off automatically to save power.
To perform shooting again, push back and pull out
the viewfinder again or close and re-open the LCD
monitor.
● The Motor Drive mode (墌 pg. 42) is disabled
when the VIDEO/MEMORY Switch is set to
“MEMORY”.
● When the S/AV/Editing cable is connected to the
S/AV connector, the shutter sound is not heard
from the speaker, however it is recorded onto the
tape.
● Still images taken are compliant to DCF (Design
rule for Camera File system). They do not have any
compatibility with devices which are not
compliant to DCF.
RECORDING & PLAYBACK
VIDEO/MEMORY Switch
B
15
DIGITAL STILL CAMERA (D.S.C.)
You can use your camcorder as a Digital Still
Camera for taking snapshots. Still images are stored
in the memory card.
NOTE:
Before continuing, perform the procedures listed
below:
● Power (墌 pg. 10)
● Loading A Memory Card (墌 pg. 16)
23
Master Page: Left-Heading0
GR-DVP9Asia.book Page 24 Monday, February 10, 2003 1:12 PM
24 EN
D.S.C. PLAYBACK
Normal Playback Of Images
Images shot with the camcorder are automatically
numbered, then stored in numerical order in the
memory card. You can view the stored images, one
at a time, much like flipping through a photo album.
VIDEO/MEMORY Switch
Play/Pause Button
(4/9)
Power Switch
NOTES:
● Even if you shoot a new image after playing back a
low-numbered one, this will not overwrite an
existing image, because new images are
automatically stored after the last-recorded one.
● Images shot in a file size other than “640 x 480”,
“1024 x 768”, “1280 x 960” and “1600 x 1200”
with another devices will be displayed thumbnail
images. These thumbnail images cannot be
transferred to a PC.
● Images shot with devices (such as JVC GR-DVX70)
that are not compatible with DCF cannot be
viewed with this camcorder; “UNSUPPORTED
FILE!” will be displayed.
Playback Zoom
Available only with the remote control (provided).
(墌 pg. 55)
Lock Button
Auto Playback Of Images
Stop Button (8)
SHUTTLE SEARCH Ring (3/5)
INFO Button
You can run through all the images stored in
memory card automatically.
1
Perform steps 1 – 6 in “Normal Playback Of
Images”.
2
Press 4/9 to start Auto Playback.
● If you turn the SHUTTLE SEARCH Ring to the
left (3) during Auto Playback, files are
displayed in descending order.
● If you turn the SHUTTLE SEARCH Ring to the
right (5) during Auto Playback, files are
displayed in ascending order.
3
To end Auto Playback, press 8.
SET/SELECT
Button
1
2
3
Load a memory card. (墌 pg. 16)
4
Open the LCD monitor fully, or pull out the
viewfinder fully.
● The type of file (IMAGE, E-MAIL CLIP or
SOUND) which has been played back at the
last time is displayed.
5
6
7
Set the VIDEO/MEMORY Switch to “MEMORY”.
Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
[For Normal Playback]
[For Auto Playback]
To display the next image
Image playback screen (IMAGE)
100-0013
If the video clip playback (E-MAIL CLIP,
墌 pg. 25) or the digital sound playback
(SOUND, 墌 pg. 25) screen appears, press SET/
SELECT. The MEMORY SELECT screen appears.
100-0014
Press + or – to select “IMAGE”, and press SET/
SELECT. The image playback screen (IMAGE)
appears.
Turn the SHUTTLE SEARCH Ring to the left
(3) to display the previous file. Turn the
SHUTTLE SEARCH Ring to the right (5) to
display the next file.
● Pressing INFO gives you details on the
displayed file. (墌 pg. 26)
● You can also look for the desired file using
Index Screen. (墌 pg. 26)
● You can turn off the on-screen playback
display. (墌 pg. 26)
100-0015
100-0016
To display the previous image
Master Page: Right
GR-DVP9Asia.book Page 25 Monday, February 10, 2003 1:12 PM
EN
Playback Of Video Clips
Load a memory card. (墌 pg. 16)
4
Open the LCD monitor fully, or pull out the
viewfinder fully.
● The type of file (IMAGE, E-MAIL CLIP or
SOUND) which has been played back at the
last time is displayed.
5
If the image playback (IMAGE) or the digital
sound playback (SOUND) screen appears, press
SET/SELECT. The MEMORY SELECT screen
appears.
6
Press + or – to select
“E-MAIL CLIP”, and press
SET/SELECT. The video
clip playback screen
(E-MAIL CLIP) appears.
7
8
9
Set the VIDEO/MEMORY Switch to “MEMORY”.
Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
E - M A I L C LI P
Turn the SHUTTLE
SEARCH Ring to the left
(3) to select the previous file. Turn the
SHUTTLE SEARCH Ring to the right (5) to
select the next file.
● Pressing INFO gives you details on the
displayed file. (墌 pg. 26)
● You can also look for the desired file using
Index Screen. (墌 pg. 26)
12 sound effects are pre-stored in the provided
memory card. You can listen to the sound effects
stored in the memory card. The sound effects can be
also dubbed onto a tape. (墌 pg. 46)
EXPLOSION
SIREN
LAUGHTER
RACE CAR
DOOR BELL
BUZZER
FANFARE
APPLAUSE
CHEERS
BOING
SCREAM
JEERS
Explosion
Siren
Laughter
Racing car
Door bell
Buzzer
Fanfare
Applause
Cheers
Booing
Scream
Jeers
1
2
3
Load the provided memory card. (墌 pg. 16)
4
Open the LCD monitor fully, or pull out the
viewfinder fully.
● The type of file (IMAGE, E-MAIL CLIP or
SOUND) which has been played back at the
last time is displayed.
5
If the image playback (IMAGE) or the video clip
playback (E-MAIL CLIP) screen appears, press
SET/SELECT. The MEMORY SELECT screen
appears.
6
Press + or – to select
“SOUND”, and press SET/
SELECT. The digital sound
playback screen (SOUND)
appears.
7
To play back the sound
effect, press 4/9.
● All the sounds are played back in ascending
order.
To start playback, press 4/9.
To stop playback, press 8.
Set the VIDEO/MEMORY Switch to “MEMORY”.
RECORDING & PLAYBACK
1
2
3
Playback Of Digital Sound Effects
Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
SOUND
NOTES:
● In the digital sound playback screen,
• Turn the SHUTTLE SEARCH Ring to the left
(3) to select the previous file. Turn the
SHUTTLE SEARCH Ring to the right (5) to
select the next file.
• Pressing INFO gives you details on the displayed
file. (墌 pg. 26)
● You can also look for the desired file using Index
Screen. (墌 pg. 26)
DIGITAL STILL CAMERA (D.S.C.)
You can view video clips (墌 pg. 48) stored in the
memory card.
25
Master Page: Left
GR-DVP9Asia.book Page 26 Monday, February 10, 2003 1:12 PM
26 EN
D.S.C. PLAYBACK (cont.)
Index Playback Of Files
Information Screen
FOL DER
F I LE
DA T E
S I ZE
QUA L I T Y
P RO T E C T
You can view several different files stored in the
memory card at a time. This browsing capability
makes it easy to locate a particular file you want.
1
2
For Index Playback of image files, perform 1 – 6
in “Normal Playback Of Images” (墌 pg. 24).
For Index Playback of video clip files, perform
1 – 6 in “Playback Of Video Clips” (墌 pg. 25).
For Index Playback of sound files, perform 1 – 6
in “Playback Of Digital Sound Effects”
(墌 pg. 25).
3
4
● Press the INFO Button again to close the
Information Screen.
NOTE:
With images shot with other devices or processed on
a PC, “QUALITY: – – –” will be displayed.
Press INDEX. The Index Screen of the selected
type of file appears.
Selected file
Index number
1
2
3
4
5
6
7
8
9
Index Screen
Press + or – to move the frame to the desired file.
● Turn the SHUTTLE SEARCH Ring to the left
(3) to display the previous page. Turn the
SHUTTLE SEARCH Ring to the right (5) to
display the next page.
Press SET/SELECT. The selected file is displayed.
● Pressing INFO gives you details on the
displayed file. (See below.)
: 1 0 0 J V CGR
: DVC 0 0 0 1 0
: 2 7 . 1 0 .0 3
: 1 0 2 4X7 6 8
: F I NE
: OF F
Removing On-Screen Display
1
Perform steps 1 – 6 in “Normal Playback Of
Images” (墌 pg. 24).
2
3
Press MENU. The Menu Screen appears.
4
Press + or – to select “DISPLAY”, and press SET/
SELECT. The Sub Menu appears.
Press + or – to select “OFF”, and press SET/
SELECT. The operation mode indicator, folder/file
number and battery indicator (
) disappear.
● To display the indicators again, select “ON”.
Operation mode indicator
Folder/file number
100-0013
ME NU
D I SPLAY
Viewing File Information
You can get the relevant file information by pressing
the INFO Button during normal playback or Index
Playback.
FOLDER
FILE
DATE
SIZE
QUALITY
TIME
PROTECT
:
:
:
:
Folder name (墌 pg. 29)
File name (墌 pg. 29)
Date the file was made
Image size (IMAGE/E-MAIL CLIP
only)
: Picture quality (IMAGE only)
: Playback time (E-MAIL CLIP/SOUND
only)
: When set to “ON”, the file is
protected from accidental erasure.
(墌 pg. 27)
Battery indicator
OF F
ON
RETURN
Master Page: Right
GR-DVP9Asia.book Page 27 Monday, February 10, 2003 1:12 PM
EN
27
To protect the currently displayed file
9
The Protect mode helps prevent the accidental
erasure of files.
10
11
Press + or – to select
“EXECUTE”, and press
SET/SELECT.
● To cancel protection,
select “RETURN”.
● Repeat steps 10 and 11
for all files you want to
protect.
Lock Button
MENU Button
SET/SELECT Button
+, – Button
ME NU
CURRENT
PROT . AL L
CANC . AL L
RETURN
Turn the SHUTTLE
SEARCH Ring to the left
(3) or to the right (5)
to select the desired file.
Power Switch
SHUTTLE SEARCH Ring (3/5)
PROTECT
P ROTECT
PROTECTED
RETURN
To protect all files stored in the memory
card
9
Press + or – to select “PROT.ALL”, and press SET/
SELECT. The PROTECT screen appears.
10
Press + or – to select “EXECUTE”, and press
SET/SELECT.
● To cancel protection, select “RETURN”.
1
2
3
Load a memory card. (墌 pg. 16)
4
Open the LCD monitor fully, or pull out the
viewfinder fully.
● The type of file (IMAGE, E-MAIL CLIP or
SOUND) which has been played back at the
last time is displayed.
Set the VIDEO/MEMORY Switch to “MEMORY”.
Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
If you want to select another type of file, go to
step 5.
If not, go to step 7.
5
Press SET/SELECT. The MEMORY SELECT screen
appears.
6
Press + or – to select the desired type of file, and
press SET/SELECT.
7
8
Press MENU. The Menu Screen appears.
Press + or – to select
“PROTECT”, and press
SET/SELECT. The Sub
Menu appears.
MENU
PROTECT
DELETE
DPOF
NO . RESET
FORMAT
D I SPLAY
END
RECORDING & PLAYBACK
VIDEO/MEMORY Switch
Press + or – to select
“CURRENT”, and press
SET/SELECT. The
PROTECT screen appears.
NOTES:
● If the “
” mark appears, the currently displayed
file is protected.
● When the memory card is initialised or corrupted,
even protected files are deleted. If you do not want
to lose important files, transfer them to a PC and
save them.
To Remove Protection
Before doing the following, perform steps 1 – 8 in
“Protecting Files” in the left column.
To remove protection from the currently
displayed file
9
Press + or – to select “CURRENT”, and press SET/
SELECT. The PROTECT screen appears.
10
Turn the SHUTTLE SEARCH Ring to the left
(3) or to the right (5) to select the desired
file.
11
Press + or – to select “EXECUTE”, and press
SET/SELECT.
● To cancel selection, select “RETURN”.
● Repeat steps 10 and 11 for all files you want to
remove protection.
CONTINUED ON NEXT PAGE
DIGITAL STILL CAMERA (D.S.C.)
Protecting Files
Master Page: Left
GR-DVP9Asia.book Page 28 Monday, February 10, 2003 1:12 PM
28 EN
D.S.C. PLAYBACK (cont.)
To remove protection from all files stored
in the memory card
9
Press + or – to select “CANC.ALL”, and press
SET/SELECT. The PROTECT screen appears.
10
Press + or – to select “EXECUTE”, and press
SET/SELECT.
● To cancel selection, select “RETURN”.
8
Press + or – to select “DELETE”, and press SET/
SELECT. The Sub Menu appears.
To delete the currently displayed file
9
Press + or – to select
“CURRENT”, and press
SET/SELECT. The DELETE
screen appears.
10
ME NU
DELETE
CURRENT
ALL
RETURN
Turn the SHUTTLE
SEARCH Ring to the left
(3) or to the right (5)
to select the desired file.
Deleting Files
Previously stored files can be deleted either one at a
time or all at once.
11
Press + or – to select
“EXECUTE”, and press
SET/SELECT.
● To cancel deletion,
select “RETURN”.
● Repeat steps 10 and 11
for all files you want to
delete.
VIDEO/MEMORY Switch
Power Switch
D ELETE
DELETE?
EXECUTE
RETURN
NOTE:
If the “
” mark appears, the selected file is
protected and cannot be deleted.
Lock Button
To delete all files stored in the memory
card
9
SHUTTLE SEARCH Ring (3/5)
SET/SELECT
Button
MENU Button
+, – Button
Press + or – to select “ALL”, and press SET/
SELECT. The DELETE screen appears.
10
Press + or – to select “EXECUTE”, and press
SET/SELECT.
● To cancel deletion, select “RETURN”.
NOTES:
● Protected files (墌 pg. 27) cannot be deleted. To
delete them, remove protection first.
● Once files are deleted, they cannot be restored.
Check files before deleting.
1
2
3
Load a memory card. (墌 pg. 16)
4
Open the LCD monitor fully, or pull out the
viewfinder fully.
● The type of file (IMAGE, E-MAIL CLIP or
SOUND) which has been played back at the
last time is displayed.
Set the VIDEO/MEMORY Switch to “MEMORY”.
Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
If you want to select another type of file, go to
step 5.
If not, go to step 7.
5
Press SET/SELECT. The MEMORY SELECT screen
appears.
6
Press + or – to select the desired type of file, and
press SET/SELECT.
7
Press MENU. The Menu Screen appears.
CAUTION:
Do not remove the memory card or perform any
other operation (such as turning off the
camcorder) during deletion. Also, be sure to use
the provided AC Power Adapter/Charger, as the
memory card may be corrupted if the battery
becomes exhausted during deletion. If the
memory card becomes corrupted, initialise it.
(墌 pg. 30)
Master Page: Right
GR-DVP9Asia.book Page 29 Monday, February 10, 2003 1:12 PM
EN
Resetting The File Name
Load a memory card. (墌 pg. 16)
4
Open the LCD monitor fully, or pull out the
viewfinder fully.
● The type of file (IMAGE, E-MAIL CLIP or
SOUND) which has been played back at the
last time is displayed.
5
If the digital sound playback (SOUND,
(墌 pg. 25)) screen appears, press SET/SELECT.
The MEMORY SELECT screen appears.
6
Press + or – to select the desired type of file
(IMAGE or E-MAIL CLIP), and press SET/SELECT.
The image or video clip playback screen (IMAGE
or E-MAIL CLIP) appears.
Set the VIDEO/MEMORY Switch to “MEMORY”.
Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
7
8
Press MENU. The Menu Screen appears.
9
Press + or – to select “EXECUTE”, and press SET/
SELECT. The new folder (such as “101JVCGR”)
will be made and the file made of the next shot
starts from DVC00001.
Press + or – to select “NO. RESET”, and press
SET/SELECT. The NO. RESET screen appears.
Folder and File names
Each time shooting takes place, a file name is made
using a number which is larger by one than the
largest number of the file names which are in use.
Even if you delete an image or video clip file with a
number in the middle of range, the number will not
be used for a new shot; a gap will remain in the
numerical sequence. If the file name reaches
DVC09999, a new folder (such as “101JVCGR”) will
be made and the file name will start again from
DVC00001.
This camcorder is compatible with the DPOF
(Digital Print Order Format) standard in order to
support future systems such as automatic printing.
You can select one of the 2 print information settings
for images stored in the memory card: “To Print All
Still Images (One Print For Each)” or “To Print By
Selecting Still Images And Number Of Prints”.
NOTES:
● If you load a memory card already set as shown
below in a printer compatible with DPOF, it will
make prints of the selected still images
automatically.
● To print images recorded on a tape, first dub them
to a memory card. (墌 pg. 53)
To Print All Still Images (One Print For Each)
1
2
3
Load a memory card. (墌 pg. 16)
4
Open the LCD monitor fully, or pull out the
viewfinder fully.
● The type of file (IMAGE, E-MAIL CLIP or
SOUND) which has been played back at the
last time is displayed.
5
If the video clip playback (E-MAIL CLIP,
墌 pg. 25) or the digital sound playback
(SOUND, 墌 pg. 25) screen appears, press SET/
SELECT. The MEMORY SELECT screen appears.
6
Press + or – to select “IMAGE”, and press SET/
SELECT. The image playback screen (IMAGE)
appears.
7
8
Press MENU. The Menu Screen appears.
9
Set the VIDEO/MEMORY Switch to “MEMORY”.
RECORDING & PLAYBACK
1
2
3
Setting Print Information (DPOF
Setting)
Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
Press + or – to select
“DPOF”, and press SET/
SELECT. The Sub Menu
appears.
ME NU
DPOF
CURRENT
AL L 1
RESET
RETURN
Press + or – to select
“ALL 1”, and press SET/
SELECT. The DPOF screen
appears.
10
Press + or – to select
“EXECUTE”, and press
SET/SELECT. The normal
playback screen appears.
● To cancel selection,
select “RETURN”.
DPOF
AL L 1 ?
EXECUTE
RETURN
CONTINUED ON NEXT PAGE
DIGITAL STILL CAMERA (D.S.C.)
By resetting the file name, a new folder will be
made. The new files you are going to make will be
stored in the new folder. It is convenient to separate
the new files from previously made files. (Available
only for Image and video clip files.)
29
Master Page: Left
GR-DVP9Asia.book Page 30 Monday, February 10, 2003 1:12 PM
30 EN
D.S.C. PLAYBACK (cont.)
To Print By Selecting Still Images And Number
Of Prints
1
Perform steps 1 – 8 in “To Print All Still Images
(One Print For Each)” (墌 pg. 29).
2
Press + or – to select
“CURRENT”, and press
SET/SELECT. The DPOF
screen appears.
DPOF
SHEETS
3
Turn the SHUTTLE
SEARCH Ring to the left
(3) or to the right (5)
to select the desired file.
4
Press + or – to select the number indication (00),
and press SET/SELECT.
5
Select the number of prints
DPOF
by pressing + to increase
the number, or – to
SHEETS
decrease the number, and
05
press SET/SELECT.
● Repeat steps 3 through 5
for the desired number
of prints.
● The number of prints can be set up to 15.
● To correct the number of prints, select the
image again and change the number.
6
7
Press + or – to select
“RETURN”, and press SET/
SELECT. The “SAVE?”
appears.
● If you did not change
any settings in step 3
through 5, the Menu
Screen reappears.
00
RETURN
DPOF
SAVE?
EXECUTE
CANCEL
Press + or – to select “EXECUTE” to save the
setting you have just made, and press SET/
SELECT.
● To cancel selection, select “CANCEL”.
To Reset The Number Of Prints
1
Perform steps 1 – 8 in “To Print All Still Images
(One Print For Each)” (墌 pg. 29).
2
Press + or – to select “RESET”, and press SET/
SELECT. The DPOF screen appears.
3
Press + or – to select “EXECUTE”, and press SET/
SELECT. The normal playback screen appears.
● To cancel selection, select “RETURN”.
● The number of prints is reset to 0 for all still
images.
CAUTION:
While performing the above, never disconnect
power, as this may cause the memory card to be
corrupted.
Initialising A Memory Card
You can initialise a memory card anytime.
After initialising, all files and data stored in the
memory card, including those which have been
protected, are cleared.
1
2
Set the VIDEO/MEMORY Switch to “MEMORY”.
3
Open the LCD monitor fully, or pull out the
viewfinder fully.
4
Press MENU. The Menu
Screen appears.
5
6
Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
Press + or – to select
“FORMAT”, and press
SET/SELECT. The FORMAT
screen appears.
MENU
PROTECT
DELETE
DPOF
NO . RESET
FORMAT
D I SPLAY
END
F ORMAT
ERASE AL L
EX I ST I NG DATA?
EXECUTE
Press + or – to select
RETURN
“EXECUTE”, and press
SET/SELECT. The memory
card is initialised.
● When initialisation is finished, “NO IMAGES
STORED”, “NO E-MAIL CLIP STORED” or
“NO SOUND STORED” appears.
● To cancel initialisation, select “RETURN”.
CAUTION:
Do not perform any other operation (such as
turning off the camcorder) during initialisation.
Also, be sure to use the provided AC Power
Adapter/Charger, as the memory card may be
corrupted if the battery becomes exhausted during
initialisation. If the memory card becomes
corrupted initialise it.
Master Page: Right-start
GR-DVP9Asia.book Page 31 Monday, February 10, 2003 1:12 PM
MENUS FOR DETAILED ADJUSTMENT
Changing The Menu Settings
This camcorder is equipped with an easy-to-use, onscreen menu system that simplifies many of the
more detailed camcorder settings. (墌 pg. 32 – 41)
Menus without Sub Menus
— v WIPE/FADER, r PROGRAM AE,
p EXPOSURE, u W. BALANCE
1) Press + or – to select the desired parameter.
Example: r PROGRAM AE Menu
P ROGRAM AE
Selected menu icon blinks.
VIDEO/MEMORY Switch
31
EN
Power Switch
OF F
N I GH T A L IV E
SHUT T E R
SHUT T E R
SPOR T S
SNOW
SPOT L I GHT
TWILIGHT
Selected parameter
MENU Button
SET/SELECT Button
+, – Button
W I PE / F AD E R
OF F
FADE R –WH I T E
FADE R – B LAC K
FADE R – B .W
W I PE – CO RNE R
W I PE –W I NDOW
W I PE – S L I DE
W I PE – DOOR
W I PE – S C ROL L
W I PE – S H UT T E R
Menus with Sub Menus
— m CAMERA, q MANUAL, s SYSTEM,
n CAMERA DISPLAY, o DSC, t VIDEO,
n VIDEO DISPLAY
1) Press + or – to select the desired function and
press SET/SELECT. The Sub Menu appears.
Example: m CAMERA Menu
1
For Video and D.S.C. Recording Menus:
● Set the VIDEO/MEMORY Switch to “VIDEO”
or “MEMORY”.
● Set the Power Switch to “M” while pressing
down the Lock Button located on the switch.
For Video Playback Menus:
● Set the VIDEO/MEMORY Switch to “VIDEO”.
● Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
● For D.S.C. Playback Menus, refer to “D.S.C.
PLAYBACK” (墌 pg. 24).
2
Open the LCD monitor fully, or pull out the
viewfinder fully.
3
Press MENU. The Menu Screen appears.
Menu Screen for Video
and D.S.C. Recording
Menu
W I PE / F AD E R
OF F
FADE R –WH I T E
FADE R – B LAC K
FADE R – B .W
W I PE – CO RNE R
W I PE –W I NDOW
W I PE – S L I DE
W I PE – DOOR
W I PE – S C ROL L
W I PE – S H UT T E R
Menu Screen for Video
Playback Menu
V I D EO
SOUND MOD E – ST E REO
1 2 b i t MOD E – SOUND 1
SY NCHRO
– ±0 . 0
RE C MOD E –
COP Y – OF F
NA V I . DE L .
BL ANK S RCH
S / A V I N PU T – OF F
Selected function
Selected menu icon blinks.
CAME RA
RE C MOD E –
SOUND MOD E –
ZOOM
–
SNA P MODE –
GA I N UP
–
NA V I GAT I ON –
12b i t
40x
FU L L
AU TO A
MANUA L
RETURN
2) Press + or – to select the
desired parameter.
Sub Menu
CAME RA
RE C MOD E –
RETURN
3) Press SET/SELECT.
Selection is complete.
● Repeat the procedure if
you wish to set other
function menus.
CAME RA
RE C MOD E –
SOUND MOD E –
ZOOM
–
SNA P MODE –
GA I N UP
–
NA V I GAT I ON –
12b i t
40x
FU L L
AU TO A
MANUA L
RETURN
RETURN
4
Press + or – to select the desired function, and
press SET/SELECT. The selected function menu
appears.
5
Setting procedure hereafter depends on the
selected function.
CONTINUED ON NEXT PAGE
ADVANCED FEATURES
Lock Button
2) Press SET/SELECT.
Selection is complete. The
Menu Screen returns.
● Repeat the procedure if
you wish to set other
function menus.
3) Press SET/SELECT again.
The Menu Screen closes.
Master Page: Left-Heading0X2
GR-DVP9Asia.book Page 32 Monday, February 10, 2003 1:12 PM
32 EN
RECORDING MENUS
MENUS FOR DETAILED ADJUSTMENT (cont.)
4) Press SET/SELECT. The
Menu Screen returns.
● Repeat the procedure if
you wish to set other
function menus.
5) Press SET/SELECT again.
The Menu Screen closes.
W I PE / F AD E R
OF F
FADE R –WH I T E
FADE R – B LAC K
FADE R – B .W
W I PE – CO RNE R
W I PE –W I NDOW
W I PE – S L I DE
W I PE – DOOR
W I PE – S C ROL L
W I PE – S H UT T E R
NOTES:
● The “m” settings are effective when the Power
Switch is set to both “A” and “M”. However, the
menu settings can be changed only when the
Power Switch is set to “M”.
● The “q” settings are effective only when the
Power Switch is set to “M”.
● The “s” functions which are set when the Power
Switch is set to “M” are also applied when the
Power Switch is set to “P”.
● The “n” (CAMERA DISPLAY) settings are
effective even when the Power Switch is set to
“A”. However, the menu settings can be changed
only when the Power Switch is set to “M”.
● The date indication can also be turned on/off by
pressing the DISPLAY Button on the remote
control (provided). (墌 pg. 22, 50, 59)
Wipe Or Fader Effects
These effects let you make pro-style scene
transitions. Use them to spice up the transition from
one scene to the next.
IMPORTANT:
Some Wipe/Fader Effects cannot be used with
certain modes of Program AE with special effects.
(墌 pg. 33) If an unusable Wipe/Fader Effect is
selected, its indicator blinks in blue or goes out.
Wipe or Fader works when video recording is started
or stopped.
1
2
Set the VIDEO/MEMORY Switch to “VIDEO”.
3
Open the LCD monitor fully, or pull out the
viewfinder fully.
4
Set “v” to the desired mode. (墌 pg. 31)
● The selected effect indicator appears.
5
Press the Recording Start/Stop Button to start or
stop recording. The selected Fade-in/out or
Wipe-in/out effect works.
Set the Power Switch to “M” while pressing down
the Lock Button located on the switch.
To deactivate the selected effect…
Select “OFF” in step 4.
NOTES:
● You can select other effects for “v” during
recording.
● You can extend the length of a Wipe or Fader by
pressing and holding the Recording Start/Stop
Button.
WIPE/FADER
(Factory-preset: OFF)
OFF: Disables effects.
FADER–WHITE: Fade in or out with a white
screen.
FADER–BLACK: Fade in or out with a black
screen.
FADER–B.W: Fade in to a colour screen from a
black and white screen, or fade out from colour to
black and white.
WIPE – CORNER: Wipe in on a black screen
from the upper right to the lower left corner, or wipe
out from lower left to upper right, leaving a black
screen.
WIPE – WINDOW: The scene starts in the
centre of a black screen and wipes in toward the
corners, or comes in from the corners, gradually
wiping out to the centre.
WIPE – SLIDE: Wipe in from right to left, or
wipe out from left to right.
Master Page: Right
GR-DVP9Asia.book Page 33 Monday, February 10, 2003 1:12 PM
EN
WIPE – SCROLL: The scene wipes in from the
bottom to the top of a black screen, or wipes out
from top to bottom, leaving a black screen.
WIPE – SHUTTER: Wipe in from the centre of
a black screen toward the top and bottom, or wipe
out from the top and bottom toward the centre
leaving a black screen.
Program AE With Special Effects
IMPORTANT:
Some modes of Program AE with special effects
cannot be used with certain Wipe/Fader effects.
(墌 pg. 32) If an unusable mode is selected, the
indicator of Wipe/Fader effects blinks or goes out.
1
Set the Power Switch to “M” while pressing down
the Lock Button located on the switch.
2
Open the LCD monitor fully, or pull out the
viewfinder fully.
3
Set “r” to the desired mode. (墌 pg. 31)
● The selected effect indicator appears.
To deactivate the selected effect…
Select “OFF” in step 3.
NOTES:
● Program AE with special effects can be changed
during recording or during Record-Standby.
● Some modes of Program AE with special effects
cannot be used during Night-Scope.
PROGRAM AE
(Factory-preset: OFF)
● During Night-Scope, it may be difficult to bring
the camcorder into focus. To prevent this, use of a
tripod is recommended.
SHUTTER 1/50: The shutter speed is fixed at 1/
50th of a second. Black bands that usually appear
when shooting a TV screen become narrower.
SHUTTER 1/120: The shutter speed is fixed at
1/120th of a second. The flickering that occurs when
shooting under a fluorescent light or mercuryvapour lamp is reduced.
SPORTS
(Variable Shutter Speed: 1/250 – 1/4000)
This setting allows fast-moving images to be
captured one frame at a time, for vivid, stable slowmotion playback. The faster the shutter speed, the
darker the picture becomes. Use the shutter function
under good lighting conditions.
SNOW: Compensates for subjects that may
otherwise appear too dark when shooting in
extremely bright surroundings such as in the snow.
SPOTLIGHT: Compensates for subjects that
may otherwise appear too bright when shooting
under extremely strong direct lighting such as
spotlights.
NOTE:
“SPOTLIGHT” has the same effect as –3 with the
exposure control. (墌 pg. 44)
TWILIGHT: Makes evening scenes look more
natural. White Balance (墌 pg. 34, 45) is
automatically set to “ ”, but can be changed to
your desired setting. When Twilight is chosen, the
camcorder automatically adjusts the focus from
approx. 10 m to infinity. From less than 10 m, adjust
the focus manually. The flash does not fire in this
mode.
OFF: Deactivates Program AE with special effects.
NIGHTSCOPE
Night-Scope (NIGHTSCOPE)
Makes dark subjects or areas even brighter than they
would be under good natural lighting. The recorded
image may look as if it is strobing due to the slow
shutter speed.
● The shutter speed is automatically adjusted to
provide up to 30 times sensitivity.
● “ ” appears beside “
” while the shutter speed
is being automatically adjusted.
NOTES:
● During Night-Scope, the following functions or
settings cannot be activated and its indicator
blinks or goes out:
• Some modes of “Program AE With Special
Effects”.
• “GAIN UP” in CAMERA Menu. (墌 pg. 35)
• “DIS” in MANUAL Menu. (墌 pg. 36)
CONTINUED ON NEXT PAGE
ADVANCED FEATURES
WIPE – DOOR: Wipe in as the two halves of a
black screen open to the left and right, revealing the
scene, or wipe out and the black screen reappears
from left and right to cover the scene.
33
Master Page: Left
GR-DVP9Asia.book Page 34 Monday, February 10, 2003 1:12 PM
34 EN
RECORDING MENUS (cont.)
SEPIA: Recorded scenes have a brownish tint
like old photos. Combine this with the Cinema
mode for a classic look.
Camera Menu
MONOTONE: Like classic black and white
films, your footage is shot in B/W. Used together
with the Cinema mode, it enhances the “classic
film” effect.
Recording mode
CLASSIC FILM*: Gives recorded scenes a
strobe effect.
Allows you to set the recording mode (SP or LP)
depending on your preference.
STROBE*: Your recording looks like a series of
consecutive snapshots.
REC MODE
(Factory-preset: SP)
SP: Standard Play
LP: Long Play—more economical, providing 1.5
times the recording time.
MIRROR*: Creates a mirror image on the right
half of the screen, juxtaposed to the normal image
on the other half.
* Available only when the VIDEO/MEMORY Switch
is set to “VIDEO”.
Exposure Control
EXPOSURE
(Factory-preset: AUTO)
For details, refer to “Exposure Control” (墌 pg. 44).
AUTO: Returns to automatic exposure control.
MANUAL: Makes the exposure control indicator
appear.
White Balance Adjustment
W. BALANCE
(Factory-preset: AUTO)
For details, refer to “White Balance Adjustment”
(墌 pg. 45).
AUTO: White balance is adjusted automatically.
MWB: Adjust the white balance manually
when shooting under various types of lighting.
FINE: Outdoors on a sunny day.
CLOUD: Outdoors on a cloudy day.
HALOGEN: A video light or similar type of
lighting is used.
CAMERA
NOTES:
● Audio Dubbing (墌 pg. 56) and Insert Editing
(墌 pg. 57) are possible on tapes recorded in the
SP mode.
● If the recording mode is switched during
recording, the playback picture will be blurred at
the switching point.
● It is recommended that tapes recorded in the LP
mode on this camcorder be played back on this
camcorder.
● During playback of a tape recorded on another
camcorder, blocks of noise may appear or there
may be momentary pauses in the sound.
Sound mode
SOUND MODE
(Factory-preset: 12 bit)
12 bit: Enables video recording of stereo sound
on four separate channels, and is recommended
for use when performing Audio Dubbing.
(Equivalent to the 32 kHz mode of previous
models)
16 bit: Enables video recording of stereo sound
on two separate channels. (Equivalent to the 48
kHz mode of previous models)
Master Page: Right
GR-DVP9Asia.book Page 35 Monday, February 10, 2003 1:12 PM
EN
35
Zooming
Gain up
ZOOM
(Factory-preset: 40X)
10X: When set to “10X” while using digital zoom,
the zoom magnification will reset to 10X since
digital zoom will be disengaged.
40X*: Allows you to use the Digital Zoom. By
digitally processing and magnifying images,
zooming is possible from 10X (the optical zoom
limit), to a maximum of 40X digital magnification.
200X*: Allows you to use the Digital Zoom. By
digitally processing and magnifying images,
zooming is possible from 10X (the optical zoom
limit), to a maximum of 200X digital
magnification.
* Available only when the VIDEO/MEMORY
Switch is set to “VIDEO”.
GAIN UP
(Factory-preset: AGC)
OFF: Allows you to shoot dark scenes with no
picture brightness adjustment.
AGC: The overall appearance may be grainy, but
the image is bright.
AUTO
: The shutter speed is automatically
adjusted. Shooting a subject in low or poor
lighting at slow shutter speed provides a brighter
image than in the AGC mode, but the subject’s
movements are not smooth or natural. The overall
appearance may be grainy. While the shutter
speed is being automatically adjusted, “
” is
displayed.
Snapshot mode for video recording
NAVIGATION
(Factory-preset: MANUAL)
5SEC / 15SEC / 30SEC / 60SEC:
The captured image is stored in the memory card
as a thumbnail image when the recording time is
over the navigation time.
For example, “5SEC” is suitable to record short
scenes with the thumbnail images. (墌 pg. 47)
However, the stored thumbnail images may take
up a lot of memory. In this case, using the
memory card with large capacity is
recommended.
MANUAL: Enables thumbnail images to be made
manually. (墌 pg. 47)
SNAP MODE
(Factory-preset: FULL)
FULL: Snapshot mode with no frame
NEGA: Nega mode
PIN-UP: Pin-Up mode
FRAME: Snapshot mode with frame
FULL
NEGA
PIN-UP
FRAME
ADVANCED FEATURES
For details on the procedure, refer to “Snapshot (For
Video Recording)” (墌 pg. 41). There is the sound
effect of a shutter closing.
Navigation time
Master Page: Left
GR-DVP9Asia.book Page 36 Monday, February 10, 2003 1:12 PM
36 EN
RECORDING MENUS (cont.)
5-Second Recording
Manual Menu
Record a vacation or an important event in 5-second
clips to keep the action moving. This function is
available only for video recording.
MANUAL
Digital Image Stabilisation
To compensate for unstable images caused by
camera-shake, particularly at high magnification.
DIS
OFF / ON
Set “5S” to “5S”. (墌 pg. 31)
● “5S” appears.
2
Press the Recording Start/Stop Button to start
recording, and after 5 seconds the camcorder
enters Record-Standby mode automatically.
● Even if you press the Recording Start/Stop
Button again within 5 seconds after recording
starts, Record-Standby mode is not engaged.
3
To exit the 5S mode, select “OFF” in step 1.
(Factory-preset: ON)
NOTES:
● Accurate stabilisation may not be possible if hand
shake is excessive, or under the following
conditions:
• When shooting subjects with vertical or
horizontal stripes.
• When shooting dark or dim subjects.
• When shooting subjects with excessive
backlighting.
• When shooting scenes with movement in
various directions.
• When shooting scenes with low-contrast
backgrounds.
● Switch off this mode when recording with the
camcorder on a tripod.
● The “
” indicator blinks or goes out if the
Stabiliser cannot be used.
Self-Timer
For details, refer to “Self-Timer” (墌 pg. 42).
SELF-TIMER
OFF / ON
1
(Factory-preset: OFF)
To take a snapshot in the 5-second recording
mode…
Instead of pressing the Recording Start/Stop Button
in step 2, select the desired Snapshot mode in
CAMERA Menu (墌 pg. 35), then press SNAPSHOT.
The camcorder records a 5-second still. When “5S”
is set to “Anim.”, this function is not available.
5S
(Factory-preset: OFF)
OFF: Disables 5-Second Recording.
5S: Enables 5-Second Recording.
Anim.: Allows you to record a few frames only. By
using an inanimate object and changing its
position between shots, you can record the
subject as though it is moving.
NOTE:
When “5S” is set to “Anim.”, the 5-Second
Recording mode is not available. Animation
recording of a few frames only is taken instead.
Maximum telephoto setting
Usually the distance to a subject where the lens is in
focus depends on the zoom magnification. Unless
there is a distance more than 1 m to the subject, the
lens is out of focus at the maximum telephoto
setting.
TELE MACRO
(Factory-preset: OFF)
OFF: Disables the function.
ON: When set to “ON”, you can shoot a subject
as large as possible at a distance of approx.
60 cm.
NOTE:
Depending on the zoom position, the lens may go
out of focus.
Master Page: Right
GR-DVP9Asia.book Page 37 Monday, February 10, 2003 1:12 PM
EN
WIDE MODE
(Factory-preset: OFF)
OFF: Records with no change in the screen ratio.
For playback on a TV with a normal screen ratio.
CINEMA* : Inserts black bands at the top and
bottom of the screen. The
indicator appears.
During playback on wide-screen TVs, the black
bands at the top and bottom of the screen are cut
and the screen ratio becomes 16:9. When using
this mode, refer to your wide-screen TV’s
instruction manual. During playback/recording on
4:3 TVs/LCD monitor/viewfinder, black bands are
inserted at the top and bottom of the screen and
the image appears like a letter boxed 16:9 movie.
SQUEEZE* : For playback on TVs with an
aspect ratio of 16:9. Naturally expands the image
to fit the screen without distortion. The
indicator appears. When using this mode, refer to
your wide-screen TV’s instruction manual. During
playback/recording on 4:3 TVs/LCD monitor/
viewfinder, the image is elongated vertically.
D.WIDE* : The
indicator appears. The
zoom range is extended beyond the maximum
optical zoom wide angle range. This mode’s wide
angle setting is equivalent to using a 0.7X wide
conversion lens. Zooming is possible from 0.7X to
a magnification set in CAMERA Menu. This mode
is suitable for shooting in a small room.
* Available only when the VIDEO/MEMORY
Switch is set to “VIDEO”.
Wind cut
WIND CUT
(Factory-preset: OFF)
OFF: Disengages the function.
ON
: Helps cut down on noise created by
wind. The “
” indicator appears. The quality of
the sound will change. This is normal.
System Menu
SYSTEM
Beep, melody and shutter sound
BEEP
(Factory-preset: MELODY)
OFF: Even though not heard while shooting,
shutter sound is recorded on the tape.
BEEP: The beep sounds when the power is turned
on or off, and at the beginning and end of
recording. It also activates the shutter sound
effect. (墌 pg. 23, 41)
MELODY: Instead of a beep, a melody sounds
when any operation is performed. It also activates
the shutter sound effect. (墌 pg. 23, 41)
Tally lamp setting
TALLY
(Factory-preset: ON)
OFF: The tally lamp remains off at all times.
ON: The tally lamp comes on to signal the start of
recording.
Remote control setting
For details, refer to “USING THE REMOTE
CONTROL UNIT” (墌 pg. 54).
REMOTE
(Factory-preset: ON)
OFF: Disables the remote control operations.
ON: Enables the remote control operations.
Automatic demonstration mode
Demonstrates certain functions such as Program AE
with special effects, etc., and can be used to confirm
how these functions operate. (墌 pg. 9)
DEMO MODE
(Factory-preset: ON)
OFF: Automatic demonstration will not take
place.
ON: Demonstrates certain functions such as
Program AE with special effects, etc., and can be
used to confirm how these functions operate.
Demonstration starts in the following cases:
•When the Menu Screen is closed after “DEMO
MODE” is turned “ON”.
•With “DEMO MODE” set to “ON”, if there is no
operation for about 3 minutes after the Power
Switch is set to “A” or “M”.
Performing any operation during the
demonstration stops the demonstration
temporarily. If no operation is performed for more
than 3 minutes after that, the demonstration will
resume.
CONTINUED ON NEXT PAGE
ADVANCED FEATURES
Wide mode
37
Master Page: Left
GR-DVP9Asia.book Page 38 Monday, February 10, 2003 1:12 PM
38 EN
NOTES:
● If a cassette is in the camcorder, the demonstration
cannot be turned on.
● “DEMO MODE” remains “ON” even if the
camcorder power is turned off.
● If “DEMO MODE” remains “ON”, some functions
will not be available. After viewing demo, set to
“OFF”.
Sound input
SOUND IN
(Factory-preset: MIC/AUX)
MIC/AUX: Enables sound input from camcorder’s
stereo microphone, when Audio Dubbing
(墌 pg. 56) is executed. “MIC” or “AUX” appears
on the Audio Dubbing screen depending on the
sound input you use.
D.SOUND: Enables sound effect input recorded
on the provided memory card, when Audio
Dubbing (墌 pg. 56) is executed. “D.SOUND”
appears on the Audio Dubbing screen.
E-Mail Clip Recording
For details, refer to “E-Mail Clip Recording”
(墌 pg. 48).
E-CLIP REC
(Factory-preset: 240 x 176)
160 x 120 / 240 x 176
Priority setting
When the viewfinder is pulled out while the LCD
monitor is opened, you can select which one to use.
PRIORITY
(Factory-preset: LCD)
LCD: Allows you to use the LCD monitor.
FINDER: Allows you to use the viewfinder.
Resetting menu settings
CAM RESET
EXECUTE: Resets all settings to the factory-preset.
RETURN: Does not reset all settings to the factorypreset.
RECORDING MENUS (cont.)
Display Menu
CAMERA DISPLAY
Display setting
ON SCREEN
(Factory-preset: LCD/TV)
LCD: Keeps the camcorder’s display (except the
date, time and time code) from appearing on the
connected TV screen.
LCD/TV: Makes the camcorder’s display appear
on screen when the camcorder is connected to a
TV.
Date and time display setting
DATE/TIME
(Factory-preset: AUTO)
OFF: The date/time does not appear.
AUTO: Displays the date/time for approx.
5 seconds when the Power Switch is set from
“OFF” to “A” or “M”.
ON: The date/time is always displayed.
Time code setting
TIME CODE
(Factory-preset: OFF)
OFF: Time code is not displayed.
ON: Time code is displayed on the camcorder
and on the connected TV. Frame numbers are not
displayed during recording.
Clock adjustment
CLOCK ADJ.
Allows you to set the current date and time.
(墌 pg. 14)
Master Page: Right
GR-DVP9Asia_07Advanced.fm Page 39 Thursday, March 6, 2003 9:25 AM
EN
Image Size/Picture Quality
MultiMediaCard
8 MB* 16 MB* 32 MB*
640 x 480/FINE
50
105
210
640 x 480/STANDARD
160
320
640
Picture quality
1024 x 768/FINE
25
50
100
The Picture Quality mode can be selected to best
match your needs. Two Picture Quality modes are
available: FINE (
) and STANDARD (
) (in order
of quality).
1024 x 768/STANDARD
80
160
320
1280 x 960/FINE
16
32
64
1280 x 960/STANDARD
50
100
200
QUALITY
FINE / STANDARD
1600 x 1200/FINE
10
20
40
1600 x 1200/STANDARD
34
68
135
DSC
(Factory-preset: FINE)
NOTE:
The number of storable images depends on the
selected picture quality as well as the composition
of the subjects in the images and the type of memory
card being used.
Image size
The Image Size mode can be selected to best match
your needs.
IMAGE SIZE
(Factory-preset: 1280 x 960)
640 x 480 / 1024 x 768 / 1280 x 960 /
1600 x 1200
NOTE:
The settings can be changed only when the VIDEO/
MEMORY Switch is set to “MEMORY”.
Approximate Number of Storable Images
Image Size/
Picture
Quality
SD Memory Card
8 MB** 8 MB* 16 MB* 32 MB* 64 MB*
640 x 480/
FINE
39
46
98
205
405
640 x 480/
STANDARD
134
150
295
625
1215
1024 x 768/
FINE
17
20
46
98
190
1024 x 768/
STANDARD
55
66
145
310
605
1280 x 960/
FINE
11
12
28
62
120
1280 x 960/
STANDARD
37
44
98
205
405
1600 x 1200
/FINE
7
8
18
40
78
1600 x 1200
/STANDARD
24
28
62
130
260
* Optional
** Provided (12 sound effects pre-stored)
Recording media selection
REC SELECT
(Factory-preset:
)
: When Snapshot recording is performed
with the VIDEO/MEMORY Switch set to
“VIDEO”, still images are recorded only onto the
tape.
/
: When Snapshot recording is
performed with the VIDEO/MEMORY Switch set
to “VIDEO”, still images are recorded not only
onto the tape but also in the memory card
(640 x 480 pixels). In this mode, the “SNAP
MODE” selection in CAMERA Menu is also
applicable to memory card recording.
ADVANCED FEATURES
DSC Menu
39
Master Page: Left-Heading0
GR-DVP9Asia.book Page 40 Monday, February 10, 2003 1:12 PM
40 EN
PLAYBACK MENUS
NOTE:
“REC MODE” can be set when the Power Switch is
set to “P” or “M”.
Video Menu
VIDEO
Dubbing from tape to memory card
Playback sound
During tape playback, the camcorder detects the
sound mode in which the recording was made, and
plays the sound back. Select the type of sound to
accompany your playback picture. According to the
menu access explanation on page 31, select
“SOUND MODE” or “12bit MODE” from the Menu
Screen and set it to the desired parameter.
SOUND MODE
(Factory-preset: STEREO
)
STEREO
: Sound is output on both “L” and “R”
channels in stereo.
SOUND L : Sound from the “L” channel is
output.
SOUND R : Sound from the “R” channel is
output.
12bit MODE
(Factory-preset: SOUND 1)
MIX: Original and dubbed sounds are combined
and output in stereo on both “L” and “R”
channels.
SOUND 1: Original sound is output on both “L”
and “R” channels in stereo.
SOUND 2: Dubbed sound is output on both “L”
and “R” channels in stereo.
NOTES:
● The “SOUND MODE” setting is available for both
12-bit and 16-bit sound. (In previous models’
functions, “12-bit” is called “32 kHz” and “16-bit”
is called “48 kHz”.)
● The camcorder cannot detect the sound mode in
which the recording was made during fast-forward
or rewind. During playback the sound mode is
displayed in the upper left corner.
Synchro adjustment
For details, refer to “For More Accurate Editing”
(墌 pg. 61).
SYNCHRO
(Factory-preset: ±0.0)
Deleting thumbnail images
For details, refer to “To delete thumbnail images”
(墌 pg. 47).
NAVI.DEL.
IMAGE SEL. / TAPE SEL. / ALL / RETURN
Blank search
Helps find a blank portion of tape when you want to
record from the middle of a tape. (墌 pg. 21)
BLANK SRCH
EXECUTE / RETURN
S-Video/AV input
S/AV INPUT
(Factory-preset: OFF)
OFF: Enables audio and video signal input from
DV IN/OUT connector. (墌 pg. 52)
A/V.IN: Enables audio and video signal input
from the S/AV connector. (墌 pg. 50)
S.IN: Enables audio and S-video signal input from
the S/AV connector. (墌 pg. 50)
System Menu
SYSTEM
Each setting is linked with “s”, which appears
when the Power Switch is set to “M”. (墌 pg. 31) The
parameters are the same as in the description on
page 37.
BEEP
(Factory-preset: MELODY)
OFF / BEEP / MELODY
Recording mode
Allows you to set the video recording mode (SP or
LP) depending on your preference. It is
recommended you use “REC MODE” in VIDEO
Menu when using this camcorder as a recorder
during dubbing. (墌 pg. 50, 52)
REC MODE
SP / LP
COPY
(Factory-preset: OFF)
OFF: Enables snapshots to be taken during tape
playback.
ON: Enables dubbing of images recorded on a
tape to a memory card. (墌 pg. 53)
(Factory-preset: SP)
TALLY
OFF / ON
(Factory-preset: ON)
REMOTE
OFF / ON
(Factory preset: ON)
DEMO MODE
OFF / ON
(Factory-preset: ON)
Master Page: Right-Heading0X2
GR-DVP9Asia_07Advanced.fm Page 41 Thursday, March 6, 2003 9:26 AM
PLAYBACK MENUS (cont.)
FEATURES FOR RECORDING
Display Menu
41
Snapshot (For Video Recording)
VIDEO DISPLAY
MENU Button
The parameters (except “OFF” in ON SCREEN
settings) are the same as in the description on
page 38.
SET/SELECT
Button
ON SCREEN
(Factory-preset: LCD)
OFF / LCD / LCD/TV
When set to “OFF”, the camcorder’s display
disappears.
DATE/TIME
(Factory-preset: OFF)
OFF / AUTO / ON
When set to “AUTO”, the date/time are displayed
in the following cases:
• When playback starts. The camcorder displays
the date/time when scenes are recorded.
• When the date is changed during playback.
+, – Button
VIDEO/MEMORY
Switch
Power Switch
SNAPSHOT Button
(Factory-preset: OFF)
NOTE:
The date indication can also be turned on/off by
pressing the DISPLAY Button on the remote control
(provided). (墌 pg. 22, 50, 59)
Lock Button
This feature lets you record still images that look like
photographs onto a tape.
Display
4
ON SCREEN Setting:
For playback sound, tape
speed and tape running
during video playback.
DATE/TIME Setting:
For date/time.
2 5 . 12 . 03
17 : 3 0
TIME CODE Setting:
For time code.
Minutes
Seconds
Frames*
12 : 34 : 24
* 25 frames = 1 second
1
2
Set the VIDEO/MEMORY Switch to “VIDEO”.
3
Open the LCD monitor fully, or pull out the
viewfinder fully.
4
Set “SNAP MODE” to the desired mode.
(墌 pg. 31, 35)
5
Press SNAPSHOT.
● The “O” indication appears and a still
image will be recorded for approx. 6 seconds,
then the camcorder re-enters the RecordStandby mode.
● You can perform Snapshot also during
recording. A still image will be recorded for
approx. 6 seconds, then the normal recording
resumes.
● Regardless of the Power Switch position (“A”
or “M”), Snapshot recording takes place using
the selected Snapshot mode.
Set the Power Switch to “M” while pressing down
the Lock Button located on the switch.
NOTES:
● To remove the shutter sound, refer to “BEEP” on
page 37.
CONTINUED ON NEXT PAGE
ADVANCED FEATURES
TIME CODE
OFF / ON
12b i t / SOUND1
L
EN
Master Page: Left
GR-DVP9Asia.book Page 42 Monday, February 10, 2003 1:12 PM
42 EN
FEATURES FOR RECORDING (cont.)
● If Program AE with special effects (墌 pg. 33) is
engaged, certain modes of Program AE with
special effects are disabled during Snapshot
recording. In such a case, the icon blinks.
● If SNAPSHOT is pressed when “DIS” is set to
“ON” (墌 pg. 36), the Stabiliser will be disabled.
● During playback as well, all snapshot modes
except Nega mode are available when
“
COPY” is set to “OFF” in VIDEO Menu.
(墌 pg. 40) However, the shutter sound is not
heard.
● During Snapshot recording, the image displayed
in the viewfinder may be partially missing.
However, there is no effect in the recorded image.
● When the S/AV/Editing cable is connected to the
S/AV connector, the shutter sound is not heard
from the speaker, however it is recorded onto the
tape.
5
To stop Self-Timer recording, press the Recording
Start/Stop Button again.
● The camcorder re-enters Record-Standby
mode.
OR
5
Press SNAPSHOT.
● After 15 seconds, the beep sounds and
snapshot recording starts. After that, the
camcorder re-enters Record-Standby mode.
6
To end Self-Timer recording, select “OFF” in
step 3.
NOTE:
If “BEEP” and “TALLY” are set to “OFF” (墌 pg. 37),
the beep does not sound and the tally lamp does not
light.
When the Recording Start/Stop Button or SNAPSHOT
is pressed, the tally lamp changes as shown:
Motor Drive Mode
Keeping SNAPSHOT pressed in step 5 provides an
effect similar to serial photography. (Interval
between still images: approx. 1 second)
● The Motor Drive mode is disabled when “REC
SELECT” is set to “
/
”. (墌 pg. 39)
Self-Timer
Once the camcorder is set, the camcorder operator
can become part of the scene in a more natural way,
adding the final touch to a memorable picture.
1
Set the Power Switch to “M” while pressing down
the Lock Button located on the switch.
2
Open the LCD monitor fully, or pull out the
viewfinder fully.
● You can tilt the LCD monitor upward to 180°
so that it faces forward and view yourself while
self-recording with the viewfinder pushed
back.
3
Set “SELF-TIMER” to
“ON ”. (墌 pg. 31, 36)
4
To engage the Self-Timer
for video recording, press
the Recording Start/Stop
Button.
● After 15 seconds, the
beep sounds and video
recording starts.
MANUA L
SE L F – T I ME R – OF F
ON
Begins blinking
(Self-Timer starts)
Blinks quickly
(Self-Timer shooting starts
soon)
Stops blinking and stays on
(Self-Timer video recording
starts)
OR
Turns off
(Self-Timer snapshot
recording occurs)
RETURN
Self-Timer indication
After approx.
15 sec.
Master Page: Right
GR-DVP9Asia.book Page 43 Monday, February 10, 2003 1:12 PM
EN
Auto Focus
Focus detection zone
However, correct focus may not be obtainable in the
situations listed below (in these cases perform
“Manual Focus”):
● When two subjects overlap in the same scene.
● When illumination is low.*
● When the subject has no contrast (difference in
brightness and darkness), such as a flat, onecolour wall, or a clear, blue sky.*
● When a dark object is barely visible in the LCD
monitor or the viewfinder.*
● When the scene contains minute patterns or
identical patterns that are regularly repeated.
● When the scene is affected by sunbeams or light
reflecting off the surface of a body of water.
● When shooting a scene with a high-contrast
background.
* The following low-contrast warnings appear
blinking: , , and
NOTES:
● If the lens is smeared or blurred, accurate focusing
is not possible. Keep the lens clean. (墌 pg. 73)
When condensation occurs, wipe with a soft cloth
or wait for it to dry naturally.
● When shooting a subject close to the lens, zoom
out first. (墌 pg. 18) If zoomed-in in the auto focus
mode, the camcorder may automatically zoom
out depending on the distance between the
camcorder and the subject. This will not occur
when “TELE MACRO” is set to “ON”. (墌 pg. 36)
Manual Focus
NOTE:
If you are using the viewfinder, you should already
have performed “Viewfinder Adjustment”
(墌 pg. 12).
1
Set the Power Switch to “M” while pressing down
the Lock Button located on the switch.
2
Press FOCUS. The manual focus indicator
appears.
3
To focus on a further subject, press +. The “ ”
indicator appears and blinks.
While focusing on a
further subject
Manual focus
indicator
To focus on a nearer subject, press –. The “ ”
indicator appears and blinks.
While focusing on a
nearer subject
Manual focus
indicator
4
Press SET/SELECT. Focus adjustment is complete.
● To reset to Auto Focus, press FOCUS twice or
set the Power Switch to “A”.
● If FOCUS is pressed once, the camcorder will
enter the focus adjustment mode again.
NOTES:
● Be sure to focus the lens in the maximum
telephoto position when you use the Manual
Focus mode. If you focus in on a subject in the
wide-angle position, sharply focused images
cannot be obtained when zoomed up because the
depth-of-field is reduced at longer focal lengths.
● When the focus level cannot be adjusted any
further or closer, “ ” or “ ” will blink.
ADVANCED FEATURES
The camcorder’s Full Range AF system offers
continuous shooting ability from close-up (as close
as approx. 5 cm to the subject) to infinity.
43
Master Page: Left
GR-DVP9Asia.book Page 44 Monday, February 10, 2003 1:12 PM
44 EN
SET/SELECT Button
FEATURES FOR RECORDING (cont.)
Iris Lock
+, – Button
BACK LIGHT
Button
Power
Switch
Exposure Control
Manual exposure control is recommended in the
following situations:
● When shooting using reverse lighting or when the
background is too bright.
● When shooting on a reflective natural background
such as at the beach or when skiing.
● When the background is overly dark or the subject
is bright.
1
Set the Power Switch to “M” while pressing down
the Lock Button located on the switch.
2
Open the LCD monitor fully, or pull out the
viewfinder fully.
3
Set “p” to “MANUAL”. (墌 pg. 31, 34)
● The exposure control indicator appears.
4
To brighten the image, press +. To darken the
image, press –. (maximum ±6)
● +3 exposure has the same effect as the
backlight compensation. (墌 pg. 45)
● –3 exposure has the same effect as when “r”
is set to “SPOTLIGHT”. (墌 pg. 33)
5
Press SET/SELECT. Exposure adjustment is
complete.
To return to automatic exposure control...
Set “p” to “AUTO”. (墌 pg. 31, 34) Or, set the
Power Switch to “A”.
NOTES:
● You cannot use the manual exposure control at the
same time when “r” is set to “SPOTLIGHT” or
“SNOW” (墌 pg. 33), or with the backlight
compensation. (墌 pg. 45)
● If the adjustment does not cause any visible
change in brightness, set “GAIN UP” to “AUTO”.
(墌 pg. 31, 35)
Like the pupil of the human eye, the iris contracts in
well-lit environments to keep too much light from
entering, and dilates in dim environments to allow
in more light.
Use this function in the following situations:
● When shooting a moving subject.
● When the distance to the subject changes (so its
size in the LCD monitor or the viewfinder
changes), such as when the subject is backing
away.
● When shooting on a reflective natural background
such as at the beach or when skiing.
● When shooting objects under a spotlight.
● When zooming.
When the subject is close, keep the iris locked. Even
when the subject moves away from you, the image
will not darken or brighten.
1
Set the Power Switch to “M” while pressing down
the Lock Button located on the switch.
2
Open the LCD monitor fully, or pull out the
viewfinder fully.
3
Set “p” to “MANUAL”. (墌 pg. 31, 34)
● The exposure control indicator appears.
4
Adjust zoom so that the subject fills the LCD
monitor or the viewfinder, then press and hold
SET/SELECT for over 2 seconds. The exposure
control indicator and the “ ” indication appear.
5
Press SET/SELECT. The “ ”
indication changes to “ ”
and the iris is locked.
To return to automatic iris
control...
Set “p” to “AUTO”.
(墌 pg. 31, 34) Or, set the
Power Switch to “A”.
● The exposure control
indicator and “ ” disappear.
3
Iris Lock Indicator
To lock the exposure control and the iris…
After step 3 of “Exposure Control”, adjust the
exposure by pressing + or –. Then lock the iris in
step 5 of “Iris Lock”. For automatic locking, select
“AUTO” in step 3. The iris becomes automatic after
about 2 seconds.
Master Page: Right
GR-DVP9Asia.book Page 45 Monday, February 10, 2003 1:12 PM
EN
Backlight Compensation
Backlight compensation brightens the subject
quickly.
Press BACK LIGHT. The
indicator is displayed
and the subject is brightened. If pressed again,
disappears and the brightness returns to the previous
level.
● Using the BACK LIGHT Button may cause the light
around the subject to become too bright and the
subject to become white.
● Backlight compensations is also available when
the Power Switch is set to “A”.
45
Manual White Balance Adjustment
Adjust the white balance manually when shooting
under various types of lighting.
White paper
MENU Button
+, – Button
White Balance Adjustment
1
Set the Power Switch to “M” while pressing down
the Lock Button located on the switch.
2
Open the LCD monitor fully, or pull out the
viewfinder fully.
(Factory-preset: AUTO)
3
Set “u” to “MWB”. (墌 pg. 31, 34)
● The
indication blinks slowly.
4
5
Slide down the lens cover.
CLOUD: Outdoors on a cloudy day.
6
HALOGEN: A video light or similar type of
lighting is used.
● For the setting, refer to “Changing The Menu
Settings” (墌 pg. 31).
● The selected mode indicator except “AUTO”
appears.
Press SET/SELECT until
begins blinking
rapidly.
When the setting is completed,
resumes
normal blinking.
7
Press SET/SELECT twice. The Menu Screen closes
and the Manual White Balance indicator
is
displayed.
AUTO: White balance is adjusted automatically.
MWB: Adjust the white balance manually
when shooting under various types of lighting.
(墌 “Manual White Balance Adjustment”)
FINE: Outdoors on a sunny day.
To return to automatic white balance…
Set “u” to “AUTO”. (墌 pg. 31, 34) Or, set the
Power Switch to “A”.
NOTE:
White balance cannot be used when “r” is set to
“SEPIA” or “MONOTONE”. (墌 pg. 34)
SET/SELECT
Button
Hold a sheet of plain white paper in front of the
subject. Adjust zoom or position yourself so that
the white paper fills the screen.
NOTES:
● In step 5, it may be difficult to focus on the white
paper. In such a case, adjust focus manually.
(墌 pg. 43)
● A subject can be shot under various types of
lighting conditions indoors (natural, fluorescent,
candlelight, etc.). Because the colour temperature
is different depending on the light source, the
subject tint will differ depending on the white
balance settings. Use this function for a more
natural result.
● Once you adjust white balance manually, the
setting is retained even if the power is turned off or
the battery removed.
ADVANCED FEATURES
Power
Switch
The white balance that refers to the correctness of
colour reproduction under various lighting. If the
white balance is correct, all other colours will be
accurately reproduced.
The white balance is usually adjusted automatically.
However, more advanced camcorder operators
control this function manually to achieve a more
professional colour/tint reproduction.
Master Page: Left
GR-DVP9Asia.book Page 46 Monday, February 10, 2003 1:12 PM
46 EN
FEATURES FOR RECORDING (cont.)
NAVI STORE Button
VIDEO/MEMORY Switch
Power Switch
Lock Button
D.SOUND Button
SNAPSHOT Button
INDEX/NAVI
Button
MENU Button
+, – Button
SET/SELECT Button
Recording Digital Sound Effects
The sound effects pre-stored in the provided
memory card can be dubbed onto a tape.
1
2
3
4
Load a cassette. (墌 pg. 15)
5
Open the LCD monitor fully, or pull out the
viewfinder fully.
6
Press INDEX. The Index Screen for sound effects
(墌 pg. 26) appears.
Load the provided memory card. (墌 pg. 16)
Set the VIDEO/MEMORY Switch to “VIDEO”.
Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch.
I NDEX
E X P L OS I ON
S I REN
L AUGH T E R
RAC E CAR
DOOR B E L L
BU Z Z E R
F AN F AR E
7
8
Selected Sound
Press + or – to select the desired sound effect.
Press SET/SELECT.
● Pressing D.SOUND starts playback of the
currently selected sound effect. You can check
it without recording it onto the tape. Press
D.SOUND again to stop the sound effect
playback midway.
9
Press D.SOUND during recording. The selected
sound effect indication with a “ ” mark appears
moving and the sound effect is recorded onto the
tape.
● The sound effect cannot be heard from the
speaker during recording. Connect a
headphone to the headphone connector to
hear the sound effect.
To cancel recording the sound effect midway...
Press D.SOUND again. The camcorder stops
recording the sound effect and the sound effect
indication disappears.
Downloading sound data from Web Site
You can download sound data available at our Web
Site (see below for URL) and transfer them from your
PC to the memory card using a USB cable to create
more sound effects.
http://www.jvc-victor.co.jp/english/download/
d-sound/index.html
● You can also use the PC card adapter
CU-VPSD60, floppy adapter CU-VFSD50 or USB
reader/writer CU-VUSD70 to transfer sound data
from a PC to the memory card.
● Sound data should be copied into the memory
card’s DCSD\100JVCGR folder.
● The file names should be in numerical sequence
starting from DVC00001.mp3. If you are using the
provided memory card, file names should be from
DVC00013.mp3 since 12 sound effects are prestored as DVC00001.mp3 through
DVC00012.mp3.
NOTES:
● Sound effects can also be used for Audio Dubbing.
(墌 pg. 56)
● Sound effects can also be selected during D.S.C.
playback mode. (墌 pg. 25, 26)
● Sound effects created on a PC can be transferred
to a memory card by copying them into the
memory card’s sound folder with the specified file
name. For details, refer to the instruction manual
of the provided software. However, some sound
(effects) created on a PC cannot be played back
with this camcorder.
NAVIGATION Function
The Navigation Function helps you check tape
contents by making thumbnail images on a memory
card.
Master Page: Right
GR-DVP9Asia.book Page 47 Monday, February 10, 2003 1:12 PM
EN
47
To make thumbnail images during video
recording automatically
To find scenes on tape using thumbnail images
(NAVIGATION Search)
1
2
3
4
Load a cassette. (墌 pg. 15)
1
2
3
4
Load a cassette. (墌 pg. 15)
5
5
Set “NAVIGATION” to the desired navigation
storing time. (墌 pg. 31, 35)
● If the “
” indicator appears blinking on the
screen, wait until it stops blinking. If it does not
stop blinking after a while, check if a memory
card is loaded.
6
Press the Recording Start/Stop Button to start
recording.
1h 01 m
● When the recording time
PAUSE
is over the navigation
time set in step 5, “ ”
appears briefly, then the
image of the point where
recording is started is
Displayed while the
captured and stored in
captured image is
the memory card as a
being stored in the
thumbnail image.
memory card.
● If the Recording Start/
Stop button is pressed
before “
” stops
blinking, the image of the point where the
loaded memory card is recognised is captured.
Press NAVI during video playback or stop mode.
● The loaded cassette’s
NAV I GA T I ON
DATE : 2 4 . 2 5 . 0 3
315 : 29
NAVIGATION thumbnail
TC : 1 3 : 2 3 : 1 5
1
2
3
image screen appears.
● Turn the SHUTTLE
4
5
006
SEARCH Ring to the left
(3) to display the
previous page. Turn the
SHUTTLE SEARCH Ring to the right (5) to
display the next page.
6
Press + or – to select the desired image, and press
SET/SELECT.
● The “NAVIGATION SEARCH” indication
appears blinking and the camcorder starts
searching the tape for the relevant point of the
selected thumbnail image.
Set the VIDEO/MEMORY Switch to “VIDEO”.
Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch.
Press the Recording Start/Stop Button to stop
recording.
To make thumbnail images after video recording
manually...
1) Perform steps 1 to 4 above.
2) Set “NAVIGATION” to “MANUAL”.
(墌 pg. 31, 35)
3) After the recording, press NAVI STORE.
• The “ ” indicator appears briefly and the
captured image is stored in the memory card as
a thumbnail image.
NOTES:
● The remaining number of storable thumbnail
images also appears on the screen when it reaches
10 or less. If “REC SELECT” is set to “
/
”
in DSC Menu, the number shows how many
640 x 480 pixel images can be stored.
● If “5S” is set to “5S” or “Anim.” in MANUAL
Menu, the NAVIGATION function will not work
properly.
Load a memory card. (墌 pg. 16)
Set the VIDEO/MEMORY switch to “VIDEO”.
Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
To cancel NAVIGATION search midway...
Press 4/9 or 8, or turn the SHUTTLE SEARCH Ring
to the left (3) or to the right (5).
To add thumbnail images during video
playback
1
Perform steps 1 to 4 in “To find scenes on tape
using thumbnail images (NAVIGATION Search)”.
2
3
Press 4/9 to start video playback.
Press NAVI STORE at the desired point.
● The “ ” indicator appears briefly and the
image of the point where NAVI STORE is
pressed is stored in the memory card as a
thumbnail image.
To delete thumbnail images
1
2
3
Load a memory card. (墌 pg. 16)
4
5
Press MENU. The Menu Screen appears.
Set the VIDEO/MEMORY switch to “VIDEO”.
Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
Press + or – to select “t”, and press SET/
SELECT. The VIDEO Menu appears.
CONTINUED ON NEXT PAGE
ADVANCED FEATURES
7
Load a memory card. (墌 pg. 16)
Master Page: Left
GR-DVP9Asia.book Page 48 Monday, February 10, 2003 1:12 PM
48 EN
6
Press + or – to select
“NAVI.DEL.”, and press
SET/SELECT. The Sub
Menu appears.
7
By pressing + or –...
FEATURES FOR RECORDING (cont.)
V I D EO
SOUND MOD E – ST E RE O
1 2 b i t MOD E – SOUND 1
SY NCHRO
– ±0 . 0
RE C MOD E –
COP Y – OF F
NA V I . DE L .
BL ANK S RCH
S / A V I N PU T – OF F
RETURN
Select “IMAGE SEL.” to
delete the currently displayed thumbnail image.
Select “TAPE SEL.” to delete all thumbnail images
for the tape which contains the currently
displayed image.
Select “ALL” to delete all thumbnail images
stored in the memory card at once.
8
9
Press SET/SELECT. The
NAVIGATION screen
appears.
NAV I GA T I ON
● Before shooting newly over a recorded tape, be
sure to delete all thumbnail images of the previous
recording from the relevant memory card.
● If you copy thumbnail images from one memory
card to another via a PC, NAVIGATION Search
does not work with the copied memory card.
E-Mail Clip Recording
You can make video clips from real-time camera
image or recorded video footage and store them in a
memory card as files which can be conveniently
sent via E-Mail.
E-MAIL Button
DEL ETE CURRENT ?
2 6 .1 2 . 0 3
15 : 00
Press + or – to select
EXECUTE
RETURN
“EXECUTE”, and press SET/
SELECT.
● Turn the SHUTTLE
SEARCH Ring to the left (3) to display the
previous page. Turn the SHUTTLE SEARCH
Ring to the right (5) to display the next page.
● To cancel deletion, select “RETURN”.
● Thumbnail images cannot be deleted during
video playback.
CAUTION:
Do not remove the memory card or perform any
other operation (such as turning off the camcorder)
during deletion. Also, be sure to use the provided
AC Power Adapter/Charger, as the memory card may
be corrupted if the battery becomes exhausted
during deletion. If the memory card becomes
corrupted, initialise it.
NOTE:
Once images are deleted, they cannot be restored.
Check images before deleting.
IMPORTANT:
● Be sure to always use the same tape and memory
card together as they were during recording;
otherwise, the camcorder cannot recognise Tape
and Memory Card IDs to perform NAVIGATION
function properly.
● Check if an appropriate tape and memory card are
loaded when the following messages appear: “NO
ID ON TAPE OR CARD”, “UNABLE TO USE
NAVIGATION”, “THIS MEMORY CARD IS NOT
COMPATIBLE”.
● If you change the memory card while shooting on
one tape, two memory cards will share the tape’s
thumbnail images. We recommend that you use
one memory card for one tape.
● NAVIGATION Search does not work if the current
position is at a blank portion on the tape. Also, do
not leave a blank portion partway through the tape
when shooting; otherwise, NAVIGATION function
does not work properly.
MENU Button
+, – Button
Recording
Start/Stop
Button
SET/SELECT
Button
SNAPSHOT
Button
Stop (8)
Button
16
160
160
160
E- CL I P
E- CL I P
E- CL I P
0h25m
0 0 : 00
STANDBY
0h 10
: 1m
00 : 15
REC
0h00m
0 0 : 00
COMPLET E D
Remaining time
Shooting starts when the
Recording Start/Stop Button
is pressed.
Shooting stops when the
Recording Start/Stop Button
is pressed again.
Recording is complete.
Master Page: Right
GR-DVP9Asia.book Page 49 Monday, February 10, 2003 1:12 PM
EN
1
2
3
Load a memory card. (墌 pg. 16)
4
Set “E-CLIP REC” to the desired image size.
(墌 pg. 31, 38)
5
Press E-MAIL to engage the E-Mail Clip RecordStandby mode.
● “E-CLIP” appears.
6
Press the Recording Start/Stop Button to start
recording.
7
Press the Recording Start/Stop Button to stop
recording.
● “COMPLETED” is displayed, then the
camcorder re-enters the E-Mail Clip RecordStandby mode.
8
Set “E-CLIP REC” to the desired image size.
(墌 pg. 31, 38)
6
7
Press 4/9 to start video playback.
8
At the point you want to start dubbing, press
SNAPSHOT to start E-Mail Clip Recording.
9
Press SNAPSHOT to stop E-Mail Clip Recording.
● “COMPLETED” is displayed, then the
camcorder re-enters the E-Mail Clip RecordStandby mode.
Set the VIDEO/MEMORY Switch to “MEMORY”.
Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch.
Press E-MAIL to end E-Mail Clip Recording. The
normal screen reappears.
To view video clips stored in a memory card…
Refer to “Playback Of Video Clips” (墌 pg. 25).
To delete unwanted video clips stored in a memory
card…
Refer to “Deleting Files” (墌 pg. 28).
Approximate recording time
SD
Memory
Card
Image Size
240 x 176
160 x 120
8 MB*
2 min.
5 min. 40 sec.
16 MB
5 min. 40 sec.
15 min. 40 sec.
32 MB
12 min. 20 sec.
33 min. 20 sec.
* Provided
NOTE:
It is not possible to adjust the speaker and
headphone volume during E-Mail Clip Recording
mode.
To make video clips from recorded video
footage
1
2
3
4
5
Load a cassette. (墌 pg. 15)
Load a memory card. (墌 pg. 16)
Set the VIDEO/MEMORY Switch to “VIDEO”.
Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
Press E-MAIL to engage the E-Mail Clip RecordStandby mode.
● “E-CLIP” appears.
● To cancel E-Mail Clip Recording, press E-MAIL
again or press 8 to stop video playback.
10
Press E-MAIL to end E-Mail Clip Recording.
The normal screen reappears.
To view video clips stored in a memory card…
Refer to “Playback Of Video Clips” (墌 pg. 25).
To delete unwanted video clips stored in a memory
card…
Refer to “Deleting Files” (墌 pg. 28).
NOTES:
● Playback operation cannot be performed during
E-Mail Clip Recording.
● If the end of the tape is reached during E-Mail Clip
Recording, that portion will be automatically
stored in the memory card.
● If the end of the tape is reached in step 7, the
E-Mail Clip Record-Standby mode will be
automatically cancelled.
● The video clip files stored with this camcorder are
compatible with MPEG4. Some MPEG4 files
stored with other devices cannot be played back
with this camcorder.
● Video noise may appear while viewing video clips
in the LCD monitor or viewfinder, however, this
noise is not present in the actual video clips stored
in the memory card.
● You can also view video clips on your PC by using
Windows® Media Player version 6.4 or later. Refer
to the instructions of PC and software.
ADVANCED FEATURES
To make video clips from real-time camera
image
49
Master Page: Left-Heading0
GR-DVP9Asia_07Advanced.fm Page 50 Friday, March 7, 2003 6:58 PM
50 EN
DUBBING
Dubbing To Or From A VCR
.
Connector
Cover**
To S/AV connector
To S-VIDEO IN* or
OUT*
S/AV/Editing cable
(provided)
To AUDIO IN or OUT,
VIDEO IN or OUT
Not connected
VCR
TV
*
Connect when your TV/VCR has an S-VIDEO
IN/OUT connector. In this case, it is not
necessary to connect the yellow video cable.
** When connecting the cable, open the cover.
To use this camcorder as a player...
1
Following the illustrations, connect the
camcorder and the VCR. Also refer to page 22.
2
Set the camcorder’s VIDEO/MEMORY Switch to
“VIDEO”.
3
Set the camcorder’s Power Switch to “P”
while pressing down the Lock Button located on
the switch.
4
5
6
7
Turn on the VCR’s power.
8
Press 4/9 on the camcorder to start playback of
the source tape.
9
At the point you want to start dubbing, engage
the VCR’s Record mode.
Insert the source cassette in the camcorder.
Insert the recording cassette in the VCR.
Engage the VCR’s AUX and Record-Pause modes.
● Refer to the instruction manual for the VCR.
10
To pause dubbing, engage the VCR’s RecordPause mode and press 4/9 on the camcorder.
11
Repeat steps 8 – 10 for additional editing. Stop
the VCR and camcorder.
NOTES:
● It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the
battery pack. (墌 pg. 11)
● As the camcorder starts to play your footage, it will
appear on your TV. This will confirm the
connections and the AUX channel for dubbing
purposes.
● Before you start dubbing, make sure that the
indications do not appear on the connected TV. If
they do, they are being recorded onto the new tape.
To choose whether or not the following displays
appear on the connected TV...
• Date/time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.
(墌 pg. 31, 41) Or, press DISPLAY on the remote
control to turn on/off the date indication.
• Time code
Set “TIME CODE” to “OFF” or “ON”.
(墌 pg. 31, 41)
• Indications other than date/time and time code
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”.
(墌 pg. 31, 41)
To use this camcorder as a recorder...
1) Perform steps 1 to 3 in the left column.
2) Set “S/AV INPUT” to “A/V.IN” or “S.IN”*.
(墌 pg. 31, 40)
* Select “S.IN” when using S-VIDEO OUT
connector on your TV/VCR.
3) Set “REC MODE” to “SP” or “LP”. (墌 pg. 31, 34)
4) Insert the recording cassette in this camcorder.
5) Press START/STOP on the remote control to
engage the Record-Pause mode. The “ A/V . IN ” or
“ S . IN ” indication appears on the screen.
6) Press START/STOP on the remote control to start
recording. The
indication rotates.
7) Press START/STOP on the remote control again to
stop recording. The
indication stops rotating.
NOTES:
● After dubbing, set “S/AV INPUT” back to “OFF”.
● Analogue signals can be converted to digital
signals with this procedure.
● It is also possible to dub from another camcorder.
Master Page: Right
GR-DVP9Asia.book Page 51 Monday, February 10, 2003 1:12 PM
EN
Dubbing To A Video Unit Equipped
With A DV IN Connector
(Digital Dubbing)
It is also possible to copy recorded scenes from the
camcorder onto another video unit equipped with a
DV connector. Since a digital signal is sent, there is
little if any image or sound deterioration.
51
1
2
Make sure all units are turned off.
3
Set this camcorder’s VIDEO/MEMORY Switch to
“VIDEO”.
4
Set this camcorder’s Power Switch to “P”
while pressing down the Lock Button located on
the switch.
5
6
7
8
Turn on the video unit’s power.
9
At the point you want to start dubbing, engage
the video unit’s Record mode.
Connect this camcorder to a video unit equipped
with a DV input connector using a DV cable as
shown in the illustration.
Insert the source cassette in this camcorder.
Insert the recording cassette in the video unit.
Press 4/9 on this camcorder to start playback of
the source cassette.
10
Core filter
To DV IN/OUT
DV cable
(optional)
To DV IN
Video unit equipped with DV
connector
*
When connecting the cable, open the cover.
11
Repeat steps 8 – 10 for additional editing. Stop
the video unit and camcorder.
NOTES:
● It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the
battery pack. (墌 pg. 11)
● If the remote control is used when both the player
and recorder are JVC video units, both units will
perform the same operation. To prevent this from
happening, press the buttons on both units.
● If a blank portion or disturbed image is played
back on the player during dubbing, the dubbing
may stop so that an unusual image is not dubbed.
● Even though the DV cable is connected correctly,
sometimes the image may not appear in step 9. If
this occurs, turn off the power and make
connections again.
● If “Playback Zoom” (墌 pg. 55) or “Playback
Special Effects” (墌 pg. 55) is attempted or
SNAPSHOT is pressed during playback, only the
original playback image recorded on the tape is
output from the DV connector.
● When using a DV cable, be sure to use the
optional JVC VC-VDV204U DV cable.
ADVANCED FEATURES
Connector
Cover*
To pause dubbing, engage the video unit’s
Record-Pause mode and press 4/9 on this
camcorder.
Master Page: Left
GR-DVP9Asia.book Page 52 Monday, February 10, 2003 1:12 PM
52 EN
DUBBING (cont.)
Dubbing From A Video Unit
Equipped With A DV OUT
Connector (Digital Dubbing)
It is also possible to copy recorded scenes from
another video unit equipped with a DV connector
onto the camcorder. Since a digital signal is sent,
there is little if any image or sound deterioration.
1
2
Make sure all units are turned off.
3
Set this camcorder’s VIDEO/MEMORY Switch to
“VIDEO”.
4
Set this camcorder’s Power Switch to “P”
while pressing down the Lock Button located on
the switch.
5
6
7
8
9
Set “REC MODE” to “SP” or “LP”. (墌 pg. 31, 34)
Connect this camcorder to a video unit equipped
with a DV output connector using a DV cable as
shown in the illustration.
Turn on the video unit’s power.
Insert the source cassette in the video unit.
Insert the recording cassette in this camcorder.
Press START/STOP on the remote control to
engage the Record-Pause mode.
● The “ DV. IN ” indication appears on the screen.
10
Connector
Cover*
Press START/STOP on the remote control to
start recording.
● The
indication rotates.
To DV IN/OUT
11
Press START/STOP on the remote control
again to engage the Record-Pause mode.
● The
indication stops rotating.
12
Repeat steps 10 – 11 for additional editing.
Stop the video unit and camcorder.
Core filter
DV cable (optional)
To DV OUT
Video unit equipped with DV
connector
* When connecting the cable, open the cover.
NOTES:
● It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the
battery pack. (墌 pg. 11)
● If no image is displayed on the LCD monitor, set
“S/AV INPUT” to “OFF”. (墌 pg. 31, 40)
● If the remote control is used when both the player
and recorder are JVC video units, both units will
perform the same operation. To prevent this from
happening, press the buttons on both units.
● If a blank portion or disturbed image is played
back on the player during dubbing, the dubbing
may stop so that an unusual image is not dubbed.
● Even though the DV cable is connected correctly,
sometimes the image may not appear in step 9. If
this occurs, turn off the power and make
connections again.
● Digital Dubbing is performed in the sound mode
recorded on the original tape, regardless of the
current “SOUND MODE” setting. (墌 pg. 34)
● When using a DV cable, be sure to use the
optional JVC VC-VDV204U DV cable.
Master Page: Right
GR-DVP9Asia.book Page 53 Monday, February 10, 2003 1:12 PM
EN
Still images can be dubbed from a tape to a memory
card.
VIDEO/MEMORY Switch
Play/Pause Button
(4/9)
Power Switch
SNAPSHOT
Button
Lock Button
SET/SELECT MENU Button
Button
+, – Button
1
2
3
4
Load a cassette. (墌 pg. 15)
5
6
7
Set “
8
To dub the image, press SNAPSHOT.
● The ”
” indication appears during
dubbing.
● The selected image is stored in the memory
card.
Load a memory card. (墌 pg. 16)
Set the VIDEO/MEMORY Switch to “VIDEO”.
Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
COPY” to “ON”. (墌 pg. 31, 40)
Press 4/9 to start playback.
At the point you want to dub, press 4/9 again to
engage Still Playback.
NOTES:
● If SNAPSHOT is pressed in step 8 when a memory
card is not loaded, the message “COPYING
FAILED” is displayed.
● If an image recorded on the tape using “WIDE
MODE” (墌 pg. 37) is dubbed to a memory card,
the WIDE mode identifying signal is not dubbed
with it.
● To use Playback Special effects with a video image
you wish to dub, perform up to step 8 using the
remote control (provided). (墌 pg. 55)
● Images are dubbed in 640 x 480 pixels.
ADVANCED FEATURES
Dubbing Still Images Recorded On
A Tape To A Memory Card
53
Master Page: Left
GR-DVP9Asia.book Page 54 Monday, February 10, 2003 1:12 PM
54 EN
USING THE REMOTE CONTROL UNIT
The Full-Function Remote Control Unit can operate
this camcorder from a distance as well as the basic
operations (Playback, Stop, Pause, Fast-Forward and
Rewind) of your VCR. It also makes additional
playback functions possible. (墌 pg. 55)
Installing The Batteries
The remote control uses two “AAA (R03)” size
batteries. Refer to “General Battery Precautions”
(墌 pg. 70).
1
Remove the battery compartment cover while
pushing up the tab as illustrated.
2
Insert two “AAA (R03)” size batteries in the
correct direction.
3
Re-attach the battery compartment cover.
1
3
Tab
2
–
+
+
–
Insert the minus (–) end first.
Beam Effective Area (indoor use)
When using the
remote control, be
sure to point it at the
remote sensor. The
transmitted beam’s
approximate effective
distance for indoor
Remote sensor
use is 5 m.
NOTE:
The transmitted beam may not be effective or may
cause incorrect operation when the remote sensor is
directly exposed to sunlight or powerful lighting.
Buttons And Functions
A Infrared beam transmitting window
Transmits the beam signal.
The following buttons are available only when the
camcorder’s Power Switch set to “P”.
B DISPLAY Button ................... (墌 pg. 22, 50, 59)
C SHIFT Button .............................. (墌 pg. 55, 58)
D SLOW Rewind/Forward Buttons ....... (墌 pg. 55)
Left/Right Buttons ............................ (墌 pg. 55)
E REW Button
•Rewind/Reverse Shuttle Search
on a tape ..........................................(墌 pg. 21)
•Displays previous file
in a memory card .............................(墌 pg. 24)
F FADE/WIPE Button ........................... (墌 pg. 60)
G EFFECT ON/OFF Button ................... (墌 pg. 55)
H EFFECT Button .................................. (墌 pg. 55)
I PAUSE IN Connector ........................ (墌 pg. 59)
J MBR SET Button ............................... (墌 pg. 58)
K Up Button ........................................ (墌 pg. 55)
INSERT Button................................... (墌 pg. 57)
L Down Button .................................... (墌 pg. 55)
A. DUB Button .................................. (墌 pg. 56)
M PLAY Button
•Starts Playback of a tape ..................(墌 pg. 20)
•Starts Auto Playback of images
in a memory card ............................(墌 pg. 24)
N FF Button
•Forward/Forward Shuttle Search
on a tape .........................................(墌 pg. 21)
•Displays next file
in a memory card ............................(墌 pg. 24)
O STOP Button
•Stops the tape ..................................(墌 pg. 20)
•Stops Auto Playback ........................(墌 pg. 24)
P PAUSE Button
Pauses the tape ..................................(墌 pg. 55)
Q R.A.EDIT Buttons ..................... (墌 pg. 58 – 61)
The following buttons are available when the
camcorder’s Power Switch set to “A” or “M”.
a Zoom (T/W) Buttons
Zoom in/out .................................(墌 pg. 18, 55)
(Also available with the Power Switch set to
“P”)
b START/STOP Button
Functions the same as the Recording Start/Stop
Button on the camcorder.
c SNAPSHOT Button
Functions the same as SNAPSHOT on the
camcorder.
Master Page: Right
GR-DVP9Asia.book Page 55 Monday, February 10, 2003 1:12 PM
EN
Zoom Buttons
SHIFT
Left or SLOW
Rewind Button
Right or SLOW
Forward Button
Up Button
Down Button
PLAY
PAUSE
STOP
Slow-Motion Playback
Allows slow-speed search in either direction during
video playback.
During normal video playback, press SLOW (YI or
IU) more than approx. 2 seconds.
● After approx. 1 minute in Slow Rewind or
approx. 2 minutes in Slow Forward, normal
playback resumes.
● To pause Slow-Motion playback, press PAUSE (9).
● To stop Slow-Motion playback, press PLAY (U).
NOTES:
● You can also engage Slow-Motion Playback from
Still Playback by pressing SLOW (YI or IU) more
than approx. 2 seconds.
● During Slow-Motion Playback, due to digital
image processing, the picture may take on a
mosaic effect.
● After SLOW (YI or IU) is pressed and held, the still
image may be displayed for a few seconds,
followed by a blue screen for a few seconds. This
is not a malfunction.
● There may be a small margin between the slowmotion playback start point you chose and the
actual start point for Slow-Motion Playback.
● During Slow-Motion Playback, there will be
disturbances in video and the picture may seem
unstable, especially with steady images. This is not
a malfunction.
Frame-By-Frame Playback
Allows frame-by-frame search during video
playback.
During normal or still playback, press SLOW (IU)
repeatedly for forward or SLOW (YI) repeatedly for
reverse. Each time SLOW (YI or IU) is pressed, the
frame is played back.
Playback Zoom
Magnifies the recorded image up to 20X at any time
during video playback and D.S.C. playback.
1) Press PLAY (U) to start video
playback. Or perform normal
playback of images.
2) At the point you want to zoom
in, press the Zoom Button (T).
● To zoom out, press the Zoom
Button (W).
3) You can move the image on the
screen around to find a particular
portion of the picture. While
holding down SHIFT, press L
(Left), F (Right), U (Up) and E
(Down).
● To end zoom, press and hold W until
magnification returns to normal. Or, press
STOP (8) and then press PLAY (U) during video
playback.
NOTES:
● Zoom can also be used during slow-motion and
still playback.
● Due to digital image processing, the quality of the
image may suffer.
Playback Special Effects
Allows you to add creative effects to the video
playback image.
The effects that can be used during playback are
CLASSIC FILM, MONOTONE, SEPIA and STROBE.
The effects work the same in playback as they did in
recording. (墌 pg. 33)
CLASSIC FILM: Gives recorded scenes a
strobe effect.
MONOTONE: Like classic black and white
films, your footage is shot in B/W. Used together
with the Cinema mode, it enhances the “classic
film” effect.
SEPIA: Recorded scenes have a brownish tint
like old photos. Combine this with the Cinema
mode for a classic look.
STROBE: Your recording looks like a series of
consecutive snapshots.
1) To start playback, press PLAY (U).
2) Press EFFECT. The PLAYBACK EFFECT Select
Menu appears.
3) Press EFFECT repeatedly to move the highlight
bar to the desired effect.
● The selected function is activated and after
2 seconds the menu disappears.
● To deactivate the selected effect, press EFFECT
ON/OFF. To reactivate the selected effect press
EFFECT ON/OFF again.
● To change the selected effect, repeat from
step 2 above.
ADVANCED FEATURES
.
55
Master Page: Left
GR-DVP9Asia.book Page 56 Monday, February 10, 2003 1:12 PM
56 EN
USING THE REMOTE CONTROL UNIT (cont.)
Audio Dubbing
The audio track can be customised only when
recorded in the 12-bit and SP modes. (墌 pg. 34)
Stereo Microphone
Headphone
Connector
Speaker
A.DUB
PLAY
PAUSE
● If you dub onto a blank space on the tape, the
sound may be disrupted. Make sure you only edit
recorded areas.
● If feedback or howling occurs during TV playback,
move the camcorder’s microphone away from the
TV, or turn down the TV’s volume.
● If you change from 12-bit to 16-bit in midrecording and then use the tape for Audio
Dubbing, it is not effective from the point where
16-bit recording began.
● During Audio Dubbing, when the tape moves to
scenes recorded in the LP mode, scenes recorded
in 16-bit audio or a blank portion, Audio Dubbing
stops.
● To perform Audio Dubbing while watching on the
television, make connections. (墌 pg. 22)
● To perform Audio Dubbing with a video unit
connected to the camcorder’s S/AV connector, first
set “S/AV INPUT” to “A/V.IN” in VIDEO Menu.
(墌 pg. 31, 40)
The “AUX” indication appears instead of “MIC”.
Audio Dubbing Using Digital
Sound Effects
INDEX
Button
STOP
1
Play back the tape to locate the point where
editing will start, then press PAUSE (9).
2
While holding A. DUB (D) on the remote
control, press PAUSE (9). The “9D” and “MIC”
indicators appear.
3
Press PLAY (U), then begin “narrating”. Speak
into the microphone.
● To pause dubbing, press PAUSE (9).
4
To end Audio Dubbing, press PAUSE (9), then
STOP (8).
To hear the sound during Audio Dubbing...
Connect optional headphones to the headphone
connector or use the S/AV connector, and set the
“12bit MODE” to the desired mode;
• “SOUND 1” for the playback sound.
• “SOUND 2” for the dubbed sound.
• “MIX” for the playback and dubbed sound.
To hear the dubbed sound during playback…
Set “12bit MODE” to “SOUND 2” or “MIX”.
(墌 pg. 31, 40)
NOTES:
● When editing onto a tape that was recorded at
12-bit, the old and new soundtracks are recorded
separately.
MENU Button
+, – Button
SET/SELECT
Button
D.SOUND Button/Stop
(8) Button
A.DUB
PLAY
PAUSE
STOP
Master Page: Right
GR-DVP9Asia.book Page 57 Monday, February 10, 2003 1:12 PM
EN
Load the provided memory card. (墌 pg. 16)
Then, perform step 1 and 2 of “Audio Dubbing”
(墌 pg. 56).
2
3
Press MENU. The Menu Screen appears.
4
Press + or – to select “SOUND IN”, and press
SET/SELECT. The Sub Menu appears.
5
Press + or – to select “D.SOUND”, and press
SET/SELECT.
6
Press + or – to select “BRETURN”, and press SET/
SELECT twice. The Menu Screen closes and the
sound effect indication appears.
7
Press INDEX to access the sound effects Index
Screen.
8
Press + or – to select the desired sound effect and
press SET/SELECT.
9
Press PLAY (U) to begin Audio Dubbing. The
selected sound effect is dubbed onto the tape.
● The “ ” moves while it is being dubbed.
● To stop dubbing the sound effect midway, press
D.SOUND.
Press + or – to select “s”, and press SET/
SELECT. The SYSTEM Menu appears.
10
Press STOP (8) to end Audio Dubbing.
NOTES:
● After dubbing, set “SOUND IN” back to “MIC/
AUX”.
● The dubbed sound effect is recorded on
SOUND 2. (墌 pg. 40)
● If you press PAUSE (9) to pause dubbing in step 9
the selected sound effect indication remains
displayed. To resume dubbing, press PLAY (U).
Insert Editing
You can record a new scene into a previously
recorded tape, replacing a section of the original
recording with minimal picture distortion at the in
and outpoints. The original audio remains
unchanged.
START/STOP
REW
STOP
INSERT
PLAY
PAUSE
NOTES:
● Before performing the following steps, make sure
that “TIME CODE” is set to “ON”. (墌 pg. 31, 41)
● Insert Editing is not possible on a tape recorded in
the LP mode or on a blank portion of a tape.
● To perform Insert Editing while watching in the
television, make connections. (墌 pg. 22)
1
Play back the tape, locate the Edit-Out point and
press PAUSE (9). Confirm the time code at this
point. (墌 pg. 41)
2
Press REW (3) until the Edit-In point is located,
then press PAUSE (9).
3
Press and hold INSERT (I) on the remote
control, then press PAUSE (9). The “9I”
indicator and the Time Code (min.:sec.) appear
and the camcorder enters Insert-Pause mode.
4
Press START/STOP to begin editing.
● Confirm the insert at the time code you
checked in step 1.
● To pause editing, press START/STOP. Press it
again to resume editing.
5
To end Insert Editing, press START/STOP, then
STOP (8).
NOTES:
● Program AE with special effects (墌 pg. 33) can be
used to spice up the scenes being edited during
Insert Editing.
● During Insert Editing, the date and time
information changes.
● If you perform Insert Editing onto a blank space on
the tape, the audio and video may be disrupted.
Make sure you only edit recorded areas.
● During Insert Editing, when the tape moves to
scenes recorded in the LP mode or a blank
portion, Insert Edting stops. (墌 pg. 80, 81)
● If a memory card is loaded and “NAVIGATION” is
set to other than “MANUAL”, a NAVIGATION
thumbnail image is stored in the memory card.
(墌 pg. 47)
ADVANCED FEATURES
1
57
Master Page: Left
GR-DVP9Asia.book Page 58 Monday, February 10, 2003 1:12 PM
58 EN
USING THE REMOTE CONTROL UNIT (cont.)
Random Assemble Editing
[R.A.Edit]
Create edited videos easily using your camcorder as
the source player. You can select up to 8 “cuts” for
automatic editing, in any order you like. R.A.Edit is
more easily performed when the MBR (Multi-Brand
Remote) is set to operate with your brand of VCR
(see “VCR CODE LIST”), but can also be performed
by operating the VCR manually.
Before operation, make sure the batteries are
installed in the remote control. (墌 pg. 54)
SHIFT
MBR SET
IMPORTANT:
Although the MBR is compatible with JVC VCRs
and those of many other makers, it may not work
with yours or may offer limited functions.
NOTES:
● If the VCR’s power does not come on in step 1, try
another code from the VCR CODE LIST.
● Some brands of VCR do not come on
automatically. In this case, turn the power on
manually and try step 2.
● If the remote control is not able to control the
VCR, use the controls on the VCR.
● When the remote control’s batteries run out, the
VCR brand you have set will be erased. In that
case, replace the old battery with a new one to
reset the VCR brand.
VCR CODE LIST
Set Remote/VCR Code
1
2
VCR BRAND
NAME
CODE
VCR BRAND
NAME
CODE
AKAI
F B
F D
G G
PHILIPS
BLAUPUNKT
A C
DAEWOO
A H
A
I
A
I
I
I
A
C
G
SAMSUNG
I D
SANYO
C F
C E
SELECO, REX
I A
I F
SHARP
A E
A
SONY
F E
F
C I
C A
THOMSON,
TELEFUNKEN,
SABA,
NORDMENDE
I
I
I
C
TOSHIBA
F I
F A
FERGUSON
Turn off the power to the VCR and point the
remote towards the VCR’s infrared sensor. Then,
referring to the VCR CODE LIST, press and hold
MBR SET, and enter the brand code.
The code is automatically set once you release
MBR SET, and the VCR’s power comes on.
I G
I H
C B
GRUNDIG
A D
C D
HITACHI
Make sure the VCR’s power is on. Then, while
holding SHIFT, press the button on the remote
for the desired function. The functions the remote
can control are PLAY, STOP, PAUSE, FF, REW
and VCR REC STBY (you do not need to press
SHIFT for this one).
F F
F C
JVC A
B
C
I A
I F
I C
You are now ready to try Random Assemble
Editing.
MITSUBISHI
F G
F H
NEC
C G
C H
PANASONIC
A
A
A
I
A
LG/GOLDSTAR A A
C
G
A
D
H
I
E
A
D
A
F
B
C
B
A
F
G
B
Master Page: Right
GR-DVP9Asia.book Page 59 Monday, February 10, 2003 1:12 PM
EN
1
A A JVC VCR equipped with a Remote PAUSE
connector…
…Connect the editing cable to the Remote
PAUSE connector.
B A JVC VCR not equipped with a Remote
PAUSE connector but equipped with an
R.A.EDIT connector…
…Connect the editing cable to the R.A.EDIT
connector.
C A VCR other than above…
…Connect the editing cable to the remote
control’s PAUSE IN connector.
2
3
4
Insert a recorded tape into the camcorder.
5
Turn the VCR power on, insert a recordable tape
and engage the AUX mode.
● Refer to the VCR’s instructions.
Also refer to page 22.
Connector
Cover***
To S-VIDEO IN*
To S/AV connector
S/AV/Editing cable
(provided)
To AUDIO IN,
VIDEO IN
Editing
Extension cable
(provided)**
ABTo Remote
PAUSE or
R.A.EDIT
VCR
CTo PAUSE
IN
DISPLAY
TV
Set the VIDEO/MEMORY Switch to “VIDEO”.
Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
NOTES:
● Before Random Assemble Editing, make sure the
indications do not appear on the TV monitor. If
they do, they will be recorded onto the new tape.
To choose whether or not the following displays
appear on the connected TV…
• Date/time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.
(墌 pg. 31, 41) Or, press DISPLAY on the remote
control to turn on/off the date indication.
• Time code
Set “TIME CODE” to “OFF” or “ON”.
(墌 pg. 31, 41)
• Indications other than date/time and time code
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/
TV”. (墌 pg. 31, 41)
● When editing on a VCR equipped with a DV input
connector, an optional DV cable can be
connected instead of the S/AV/Editing cable.
However, it is necessary to connect the editing
cable of the S/AV/Editing cable to the VCR. (For
details, see step 1.)
*
Connect when your TV/VCR has an S-VIDEO IN
connector. In this case, it is not necessary to
connect the yellow video cable.
** If necessary, use this cable for connections.
*** When connecting the cable, open the cover.
CONTINUED ON NEXT PAGE
ADVANCED FEATURES
Make Connections
59
Master Page: Left
GR-DVP9Asia.book Page 60 Monday, February 10, 2003 1:12 PM
60 EN
USING THE REMOTE CONTROL UNIT (cont.)
Select Scenes
FADE/WIPE
EFFECT
EDIT IN/OUT
PLAY
PAUSE
R.A.EDIT
ON/OFF
CANCEL VCR REC STBY
6
7
8
9
Press PLAY (U) and then press R.A.EDIT ON/OFF
on the remote control.
The Random Assemble
Selected parameter
Editing Menu appears.
MODE
IN
OUT
If using a Wipe/Fader at
1–– –– : –– ~
2
~
the beginning of the
~
3
~
scene, press FADE/WIPE 45
~
6
~
on the remote control.
~
7
● Cycle through the
~
8
–– : ––
T I ME CODE
effects by pressing
0 0 : 00
TOTAL
repeatedly, and stop
when the one you want is displayed.
● You cannot use a Picture Wipe/Dissolve at the
beginning of Program 1.
At the beginning of the scene, press EDIT IN/
OUT on the remote control. The Edit-In position
appears in the Random Assemble Editing Menu.
At the end of the scene, press EDIT IN/OUT. The
Edit-Out position appears in the Random
Assemble Editing Menu.
10
If using a Wipe/Fader at the end of the scene,
press FADE/WIPE.
● Cycle through the effects by pressing
repeatedly, and stop when the one you want is
displayed.
● If you select a Wipe/Fader effect for an Edit-Out
point, the effect is automatically applied to the
following Edit-In point.
● You cannot use a Picture Wipe/Dissolve at the
end of the last scene.
● When you use Fader/Wipe effects, that time is
included in the total time (this does not apply
to Picture Wipe/Dissolve.)
11
If using Playback Special Effects, press EFFECT.
(墌 pg. 55)
12
Repeat steps 8 through 11 to register
additional scenes.
● To change previously registered points, press
CANCEL on the remote control. The registered
points disappear, one at a time, from the most
recently registered point.
● If you are not using Wipe/Fader or Program AE
with special effects, repeat steps 8 and 9 only.
NOTES:
● When choosing a scene, set Edit-In and Edit-Out
points so that there is a relatively large difference
between them.
● If the search time for an in-point exceeds
5 minutes, the recording deck’s Record-Standby
mode will be cancelled and editing will not take
place.
● If there are blank portions before or after the EditIn and Edit-Out points, a blue screen may be
included in the edited version.
● Since time codes register time only as accurately
as seconds, the time code total time may not
match the total program time exactly.
● Turning off the camcorder’s power erases all
registered Edit-In and Edit-Out points.
● If you select Sepia or Monotone mode from
Program AE with special effects, you cannot use
the Dissolve or Black & White Fader. In this case
the Dissolve or Black & White indicator begins
blinking. Once the next Edit-In point is registered,
the effect is turned off. To combine these effects,
use Sepia or Monotone during recording, then use
the Dissolve or Black & White Fader during
Random Assemble Editing.
● It is not possible to use Wipe/Fader effects and
Program AE with special effects during Random
Assemble Editing using a DV cable.
Picture Wipe And Dissolve Menu
(available only for Random Assemble Editing)
You can use not only the wipe/fader effects on
page 32 but also the picture wipe and dissolve
effects below.
DISSOLVE: The new scene gradually appears
as the old one gradually disappears.
WIPE – CORNER: The new scene wipes in
over the previous one from the upper right corner to
the lower left corner.
WIPE – WINDOW: The next scene gradually
wipes in from the centre of the screen toward the
corners, covering the previous scene.
WIPE – SLIDE: The next scene gradually wipes
in over the previous one from right to left.
WIPE – DOOR: The previous scene wipes out
from the centre to the right and left, like a door
being pushed open to reveal the next scene.
WIPE – SCROLL: The new scene wipes in over
the last one from the bottom of the screen to the top.
WIPE – SHUTTER: The new scene wipes in
over the previous one from the centre toward the top
and bottom of the screen.
Master Page: Right
GR-DVP9Asia.book Page 61 Monday, February 10, 2003 1:12 PM
EN
2
Perform Random Assemble Editing on Program 1
only. In order to check VCR and camcorder
timing, select the beginning of a scene transition
as your Edit-In point.
3
Play back the dubbed scene.
● If any images from the scene prior to the
transition you chose for your Edit-In point were
recorded, that means your VCR moves too
quickly from Record-Pause to Record mode.
● If the scene you tried to dub starts in progress,
the VCR is slow to start recording.
13
Rewind the tape in the camcorder to the
beginning of the scene you want to edit and press
PAUSE (9).
14
Press VCR REC STBY (79), or manually
engage the VCR’s Record-Pause mode.
15
Press START/STOP on the remote control.
Editing proceeds as programmed, right through
to the end of the last registered scene.
● When dubbing is complete, the camcorder
enters the Pause mode, and the VCR enters its
Record-Pause mode.
● If you do not register an Edit-Out point, the
tape will be dubbed all the way to the end
automatically.
● If you operate the camcorder during automatic
editing, the VCR will enter its Record-Pause
mode and automatic editing will stop.
16
Engage the Stop modes for the camcorder and
the VCR.
To make the R.A.Edit counter display disappear,
press R.A.EDIT ON/OFF on the remote control.
NOTES:
● Pressing R.A.EDIT ON/OFF on the remote control
clears all settings registered during Random
Assemble Editing.
● When the editing cable is connected to the remote
control’s PAUSE IN connector during dubbing,
make sure the remote control is pointed at the
VCR’s sensor, and the path between the two is
unobstructed.
● Random Assemble Editing may not function
properly when using a tape including several
duplicated time codes. (墌 pg. 19)
For More Accurate Editing
Some VCRs make the transition from Record-Pause
to Record mode faster than others. Even if you begin
editing for the camcorder and the VCR at exactly the
same time, you may lose scenes you wanted, or find
that you have recorded scenes you did not want. For
a cleanly edited tape, confirm and adjust the timing
of the camcorder against your VCR.
Diagnosing VCR/Camcorder Timing
1
Play back the tape in the camcorder, then point
the remote control at the camcorder’s remote
sensor and press R.A.EDIT ON/OFF.
Random Assemble Editing Menu appears.
Program 1
IN
1–– –– : ––
2
3
4
5
6
7
8
T I ME CODE
TOTAL
OUT
~
~
~
~
~
~
~
~
–– : ––
0 0 : 00
MODE
Random Assemble
Editing Menu
Adjustment Of VCR/Camcorder Timing
4
Press R.A.EDIT ON/OFF to make the Random
Assemble Editing menu disappear, then press
MENU. The Menu Screen appears.
5
Press + or – to select “t”, and press SET/
SELECT. The VIDEO Menu appears.
6
Press + or – to select “SYNCHRO”, and press
SET/SELECT. The value for “SYNCHRO” is
highlighted.
7
Based on the diagnostics performed, you can
now advance the VCR’s record timing by pressing
+. You can also delay the VCR’s record timing by
pressing –.
The adjustment range is from –1.3 to +1.3
seconds, in 0.1-second increments.
Press SET/SELECT to finish the setting.
8
Press + or – to select “BRETURN”, and press SET/
SELECT twice.
Now perform Random Assemble Editing
beginning with step 6 on page 60.
NOTES:
● Before performing actual Random Assemble
Editing, do a few Random Assemble Editing trial
runs to check whether the value you have input is
appropriate or not, and make adjustments
accordingly.
● Depending on the recorder, there may be
situations where the timing difference cannot be
fully corrected.
ADVANCED FEATURES
Automatic Editing To VCR
61
Master Page: Left-Heading0
GR-DVP9Asia_07Advanced.fm Page 62 Tuesday, March 4, 2003 9:57 PM
62 EN
SYSTEM CONNECTIONS
Connection To A Personal Computer
[A] Using USB cable
Connector
Cover*
To USB connector
USB cable (provided)
PC
To USB
OR
[B] Using DV cable
Connector
Cover*
DV cable
(optional)
Core filter
To DV IN/OUT
To DV
connector
Core filter
PC with DV
connector
* When connecting the cable, open the cover.
[A] Using USB cable
It is possible to do the following things:
● Transfer still images stored on a memory card to a
PC.
● Transfer still/moving images recorded on a tape to
a PC.
● Capture still/moving images in real-time.
● Use this camcorder as a WebCam. (墌 pg. 63)
[B] Using DV cable
It is also possible to transfer still/moving images to a
PC with a DV connector by using the provided
software, software equipped with the PC or
commercially available software.
NOTES:
● Refer to “SOFTWARE INSTALLATION AND USB
CONNECTION GUIDE” for the installation of the
bundled software and drivers.
● The software operation manual is provided as PDF
file on the CD-ROM.
● It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the
battery pack. (墌 pg. 11)
● Never connect the USB cable and the DV cable
simultaneously to the camcorder. Connect only
the cable you wish to use to the camcorder.
● When using a DV cable, be sure to use the
optional JVC VC-VDV206U or VC-VDV204U DV
cable depending on the type of DV connector (4
or 6 pins) on the PC.
● If the PC connected to the camcorder via the USB
cable is not powered, the camcorder does not
enter the USB mode.
● The date/time information cannot be captured into
the PC.
● Refer to the instruction manuals of the PC and
Software.
● The still images can also be transferred to a PC
with a DV connector-equipped capture board.
● The system may not work properly depending on
the PC or capture board you are using.
“USB MODE” and/or “ACCESSING FILES”
appears on the LCD monitor while the PC is
accessing data in the camcorder or the camcorder
is transferring a file to the PC.
NEVER disconnect the USB cable while
“ACCESSING FILES” is displayed on the LCD
monitor since this can result in product damage.
Master Page: Right
GR-DVP9Asia.book Page 63 Monday, February 10, 2003 1:12 PM
EN
This camcorder can be used as a WebCam via USB
connection.
Connector Cover*
To USB
USB cable
(provided)
To USB
connector
1
Make sure all necessary software (provided) are
installed in your PC and all units are turned off.
2
Connect the camcorder to your PC using the USB
cable.
3
4
Set the VIDEO/MEMORY Switch to “MEMORY”.
Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch.
5
Turn on the PC.
●“
” appears on the screen.
● If the PC is not powered on, the camcorder
does not enter the Web Camera mode.
6
When finished, turn off the PC first, then the
camcorder. Disconnect the USB cable from the
camcorder and PC.
NOTES:
● It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the
battery pack. (墌 pg. 11)
● Use the provided software PIXELA ImageMixer to
capture video in real time.
● You can also use the camcorder for web
conference by using Microsoft Windows®
NetMeeting® and signing up for MSN Hotmail.
● In the Web Camera mode, the following buttons
cannot be operated: E-MAIL, SNAPSHOT, INDEX/
NAVI, NAVI STORE, D.SOUND, the Recording
Start/Stop Button.
Refer to the instruction manuals of the PC and
provided Software.
USB-equipped PC
* When connecting the cable, open the cover.
ADVANCED FEATURES
Using The Camcorder As A
WebCam
63
Master Page: Left-start
GR-DVP9Asia.book Page 64 Monday, February 10, 2003 1:12 PM
64 EN
REFERENCES
ITEMS
DETAILS
NOTES
V Power (墌 pg. 10)
● Perform charging where the temperature is between 10°C and 35°C. 20°C to 25°C
is the ideal temperature range for charging. If the environment is too cold,
charging may be incomplete.
● Charging times are for a fully discharged battery pack.
● Charging time varies according to the ambient temperature and the status of the
battery pack.
● To avoid interference with reception, do not use the AC Power Adapter/Charger
near a radio.
● Since the AC Power Adapter/Charger processes electricity internally, it becomes
warm during use. Be sure to use it only in well-ventilated areas.
V VIDEO
RECORDING
(墌 pg. 17)
● When you use the LCD monitor outdoors in direct sunlight, the LCD monitor may
be difficult to see. If this happens, use the viewfinder instead.
● The cassette holder cannot be opened unless a power supply is attached.
● There may be a delay after you open the cassette holder cover until the cassette
holder opens. Do not use force.
● Once the cassette holder is closed, it recedes automatically. Wait until it recedes
completely before closing the cassette holder cover.
● When the Recording Start/Stop button is pressed, it may take a few seconds before
actual recording starts. The “T” indicator starts rotating when the camcorder
actually starts recording.
● The time required to calculate and display the remaining tape length, and the
accuracy of the calculation, may vary according to the type of tape used.
● “TAPE END” appears when the tape reaches its end, and the power goes off
automatically if left in this condition for 5 minutes. “TAPE END” also appears
when a cassette at its end is loaded.
● During recording, sound is not heard from the speaker. To hear the sound, connect
optional headphones to the headphone connector. The sound volume is at the
level it was adjusted to during playback. (墌 pg. 20)
● During Interface Shooting, the “Tape Running” indicator and warning indications
(墌 pg. 80, 81) are the only ones that are shown; they appear reversed in the
display as they would when viewing a mirror, but are not reversed in the
recording.
● The tape remaining indicator does not appear during interface shooting. However,
when the remaining time reaches 2 minutes, the indicator appears showing the
remaining time:
(blinking)
(blinking)
(blinking)
Master Page: Right-Heading0
GR-DVP9Asia.book Page 65 Monday, February 10, 2003 1:12 PM
TROUBLESHOOTING
EN
65
If, after following the steps in the chart below, the problem still exists, please consult your nearest JVC dealer.
The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio,
etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery
pack, AC Power Adapter/Charger, etc.) and wait a few minutes; and then re-connect it and proceed as usual
from the beginning.
Power
SYMPTOM
1. No power is supplied.
POSSIBLE CAUSES
CORRECTIVE ACTION
1. • The power is not connected 1. • Connect the AC Power
Adapter/Charger securely.
properly.
(墌 pg. 11)
• The battery is dead.
• Replace the dead battery
• The LCD monitor is not open
with a fully charged one.
fully or the viewfinder is not
(墌 pg. 10, 11)
pulled out when recording.
• Open the LCD monitor fully
or pull out the viewfinder.
SYMPTOM
POSSIBLE CAUSES
CORRECTIVE ACTION
2. Recording cannot be
performed.
2. • The Power Switch is set to
“P” or “OFF”.
— For Video Recording —
• The tape’s erase protection
tab is set to “SAVE”.
• The VIDEO/MEMORY
Switch is set to “MEMORY”.
• “TAPE END” appears.
• The cassette holder cover is
open.
— For D.S.C. Recording —
• The VIDEO/MEMORY
Switch is set to “VIDEO”.
2. • Set the Power Switch to “A”
or “M”. (墌 pg. 17, 23)
— For Video Recording —
• Set the tape’s erase
protection tab to “REC”.
(墌 pg. 15)
• Set the VIDEO/MEMORY
Switch to “VIDEO”.
• Replace with new cassette.
(墌 pg. 15)
• Close the cassette holder
cover.
— For D.S.C. Recording —
• Set the VIDEO/MEMORY
Switch to “MEMORY”.
3. When shooting a subject
illuminated by bright light,
vertical lines appear.
3. • This is a result of exceedingly 3.
high contrast, and is not a
malfunction.
4. • This is not a malfunction.
4. When the screen is under
direct sunlight during shooting,
the screen becomes red or
black for an instant.
—
4.
—
5. During recording, the date/
time does not appear.
5. • “DATE/TIME” is set to “OFF”. 5. • Set “DATE/TIME” to “ON”.
(墌 pg. 31, 38)
6. During recording, sound
cannot be heard.
6. • The optional headphones are 6. • Connect the optional
not connected to the
headphones to the
headphones connector.
headphone connector.
(墌 pg. 77)
CONTINUED ON NEXT PAGE
REFERENCES
Video and D.S.C. Recording
Master Page: Left
GR-DVP9Asia.book Page 66 Monday, February 10, 2003 1:12 PM
66 EN
TROUBLESHOOTING (cont.)
7. The LCD monitor or
viewfinder indications blink.
7. • Re-read the sections covering
7. • Certain Wipe/Fader effects,
Wipe/Fader effects, Program
certain modes of Program AE
AE with special effects and
with special effects, “DIS”
“DIS”. (墌 pg. 31 – 34, 36)
and other functions that
cannot be used together are
selected at the same time.
8. Digital Zoom does not work.
8. • 10X optical zoom is selected. 8. • Set “ZOOM” to “40X” or
• The VIDEO/MEMORY
“200X”. (墌 pg. 35)
Switch is set to “MEMORY”.
• Set the VIDEO/MEMORY
Switch to “VIDEO”.
Video and D.S.C. Playback
SYMPTOM
POSSIBLE CAUSES
9. Play, Rewind and Fast-Forward 9. • The Power Switch is set to
functions do not work.
“A” or “M”.
• VIDEO/MEMORY Switch is
set to “MEMORY”.
CORRECTIVE ACTION
9. • Set the Power Switch to
“P”. (墌 pg. 20)
• Set the VIDEO/MEMORY
Switch to “VIDEO”.
10. • Set the TV to the mode or
10. The tape is moving, but there is 10. • Your TV has AV input
channel appropriate for
no picture.
terminals, but is not set to its
video playback. (墌 pg. 22)
VIDEO mode.
• Close the cassette holder
• The cassette holder cover is
cover. (墌 pg. 15)
open.
11. Blocks of noise appear during
playback, or there is no
playback picture and the
screen becomes blue.
11.
12. A memory card cannot be
played back.
12. • The Power Switch is set to
“A” or “M”.
• The VIDEO/MEMORY
Switch is set to “VIDEO”.
—
11. • Clean the video heads with
an optional cleaning
cassette. (墌 pg. 73)
12. • Set the Power Switch to
“P”. (墌 pg. 24)
• Set the VIDEO/MEMORY
Switch to “MEMORY”.
Master Page: Right
GR-DVP9Asia.book Page 67 Monday, February 10, 2003 1:12 PM
EN
67
Advanced features
POSSIBLE CAUSES
CORRECTIVE ACTION
13. • Set Focus to the Auto mode.
13. • Focus is set to the Manual
(墌 pg. 43)
mode.
• Clean the lens and check the
• The recording was done in a
focus again. (墌 pg. 73)
dark place, or the contrast
was low.
• The lens is dirty or covered
with condensation.
14. In the 5-Second mode,
recording ends before
5 seconds have elapsed.
14. • The 5-Second mode is set to 14. • Set “5S” to “5S” in MANUAL
“Anim.” in MANUAL Menu.
Menu. (墌 pg. 31, 36)
15. Snapshot mode cannot be
used.
15. • The Squeeze mode
(SQUEEZE) is selected.
16. The colour of Snapshot looks
strange.
16. • Find a white subject and
16. • The light source or the
compose your shot so that it
subject does not include
also appears in the frame.
white. Or there are various
(墌 pg. 23, 41)
different light sources behind
• Disengage the Sepia (SEPIA)
the subject.
and Monotone
• The Sepia (SEPIA) or
(MONOTONE). (墌 pg. 31,
Monotone (MONOTONE)
34)
mode is activated.
17. The image taken using
Snapshot is too dark.
17. • Shooting was performed
under backlit conditions.
17. • Press BACK LIGHT.
(墌 pg. 45)
18. The image taken using
Snapshot is too bright.
18. • The subject is too bright.
18. • Set “r” to “SPOTLIGHT”.
(墌 pg. 33)
19. White Balance cannot be
activated.
19. • The Sepia (SEPIA) or
Monotone (MONOTONE)
mode is activated.
19. • Disengage the Sepia (SEPIA)
or Monotone (MONOTONE)
mode before setting White
Balance. (墌 pg. 34)
20. Wipe/Fader effects do not
work.
20. • The Power Switch is set to
“A”.
20. • Set the Power Switch to “M”.
(墌 pg. 13)
21. The Black & White Fader does 21. • The Sepia (SEPIA) or
not work.
Monotone (MONOTONE)
mode is activated.
21. • Disengage the Sepia (SEPIA)
and Monotone
(MONOTONE).
(墌 pg. 31, 34)
22. Program AE with special
effects does not work.
22. • The Power Switch is set to
“A”.
22. • Set the Power Switch to “M”.
(墌 pg. 13)
23. The image looks like the
shutter speed is too slow.
23. • When shooting in the dark,
the unit becomes highly
sensitive to light when
“GAIN UP” is set to
“AUTO”.
23. • If you want the lighting to
look more natural, set “GAIN
UP” to “AGC” or “OFF”.
(墌 pg. 31, 35)
15. • Disengage the Squeeze
(SQUEEZE) mode.
(墌 pg. 31, 37)
REFERENCES
SYMPTOM
13. The focus does not adjust
automatically.
Master Page: Left
GR-DVP9Asia.book Page 68 Monday, February 10, 2003 1:12 PM
68 EN
TROUBLESHOOTING (cont.)
Other problems
SYMPTOM
POSSIBLE CAUSES
CORRECTIVE ACTION
24. • To protect the battery, it is
24. The CHARGE indicator on the 24. • The temperature of the
recommended to charge it in
AC Power Adapter/Charger
battery is extremely high/low.
places with a temperature of
does not light.
• Charging is difficult in places
10°C to 35°C. (墌 pg. 70)
subject to extremely high/
low temperatures.
25. • Connect the camcorder to an
AC outlet using the AC Power
Adapter/Charger for over 24
hours to charge the clock’s
lithium battery. (墌 pg. 14)
25. “SET DATE/TIME!” appears.
25. • The built-in clock’s
rechargeable lithium battery
is discharged.
• The previously set date/time
is erased.
26. There is no picture.
26. • The camcorder is not getting 26. • Turn the camcorder’s power
power, or some other
off and on again. (墌 pg. 13)
malfunction exists.
27. Some functions are not
available using the MENU
Button.
27. • The Power Switch is set to
“A”.
27. • Set the Power Switch to “M”.
(墌 pg. 13)
28. Files stored in the memory
card cannot be deleted.
28. • Files stored in the memory
card are protected.
28. • Remove protection from the
files stored in the memory
card and delete them.
(墌 pg. 27 –28)
29. When the image is printed
from the printer, a black bar
appears at the bottom of the
screen.
29. • This is not a malfunction.
29. • By recording with “DIS”
activated (墌 pg. 31, 36) this
can be avoided.
30. • The DV cable was plugged/
30. When the camcorder is
unplugged with power
connected via the DV
turned on.
connector, the camcorder does
not operate.
30. • Turn the camcorder’s power
off and on again, then
operate it.
31. The rear of the LCD monitor is 31. • The light used to illuminate 31. • Close the LCD monitor to
hot.
the LCD monitor causes it to
turn it off or set the Power
become hot.
Switch to “OFF”, and let the
unit cool down.
32. Images on the LCD monitor
appear dark or whitish.
32. • Adjust the brightness and
32. • In places subject to high
angle of the LCD monitor.
temperature, images become
(墌 pg. 12, 13)
dark due to the
characteristics of the LCD
monitor. When this happens,
the displayed colours differ
from those that are actually
recorded. This is not a defect
of the camcorder.
• When the LCD monitor’s
LED light reaches the end of
its service life, images on the
LCD monitor become dark.
Consult your nearest JVC
dealer.
Master Page: Right
GR-DVP9Asia.book Page 69 Monday, February 10, 2003 1:12 PM
EN
69
33.
33. Coloured bright spots appear 33. • The LCD monitor and the
all over the LCD monitor or the
viewfinder are made with
viewfinder.
high-precision technology.
However, black spots or
bright spots of light (red,
green or blue) may appear
constantly on the LCD
monitor or the viewfinder.
These spots are not recorded
on the tape. This is not due to
any defect of the unit.
(Effective dots: more than
99.99 %)
—
34. The indicators and the image 34. • This may occur when the
colour on the LCD monitor are
surface or the edge of the
not clear.
LCD monitor is pressed.
34.
—
35. The cassette will not load
properly.
35. • The battery’s charge is low.
35. • Install a fully charged battery.
(墌 pg. 10, 11)
36. The memory card cannot be
removed from the camcorder.
36.
36. • Push in the memory card a
few more times. (墌 pg. 16)
—
37. Picture does not appear on the 37. • The viewfinder is pulled out 37. • Push the viewfinder back in
or set “PRIORITY” to “LCD”.
LCD monitor.
and “PRIORITY” is set to
(墌 pg. 12, 31, 38)
“FINDER”.
• Adjust the brightness of the
• The LCD monitor’s brightness
LCD monitor. (墌 pg. 13)
setting is too dark.
• If the monitor is tilted
upward 180 degrees, open
the monitor fully. (墌 pg. 12)
38. • The speaker volume is too
great.
39. The LCD monitor, the
39.
viewfinder and the lens have
become dirty (ex. fingerprints).
—
38. • Turn the speaker volume
down. (墌 pg. 20)
39. • Wipe them gently with soft
cloth. Wiping strongly can
cause damage. (墌 pg. 73)
40. Time code does not appear.
40. • “TIME CODE” is set to
“OFF”.
40. • Set “TIME CODE” to “ON”.
(墌 pg. 31, 38, 41)
41. An error indication (E01, E02
or E06) appears.
41. • A malfunction of some kind 41. • 墌 pg. 81.
has occurred. In this case the
camcorder’s functions
become unusable.
42. An error indication (E03 or
E04) appears.
42. • A malfunction of some kind 42. • 墌 pg. 81.
has occurred. In this case the
camcorder’s functions
become unusable.
43. The remote control does not
work.
43. • Set “REMOTE” to “ON”.
43. • “REMOTE” is set to “OFF”.
(墌 pg. 31, 37)
• The remote control does not
• Point at the remote sensor.
point at the remote sensor.
(墌 pg. 54)
• The remote control batteries
• Replace the batteries with
are exhausted.
fresh ones. (墌 pg. 54)
REFERENCES
38. Images on the LCD monitor
are jittery.
Master Page: Left-Heading0
GR-DVP9Asia.book Page 70 Monday, February 10, 2003 1:12 PM
70 EN
General Battery Precautions
If the remote control is not functioning even if it is
being operated correctly, the batteries are
exhausted. Replace them with fresh ones.
Use only the following batteries: AAA (R03) size x 2
Please make note of the following rules for battery
use. When misused, the batteries can leak or
explode.
1. When replacing batteries, refer to page 54.
2. Do not use any different size of batteries from
those specified.
3. Be sure to install batteries in the correct
direction.
4. Do not use rechargeable batteries.
5. Do not expose the batteries to excessive heat as
they can leak or explode.
6. Do not dispose of the batteries in a fire.
7. Remove the batteries from the unit if it is to be
stored for an extended period to avoid battery
leakage which can cause malfunctions.
8. Do not recharge the provided batteries.
Battery Packs
The supplied battery pack
is a lithium-ion battery.
Before using the supplied
battery pack or an
optional battery pack, be
sure to read the following
Terminals
cautions:
1. To avoid hazards…
... do not burn.
... do not short-circuit the terminals. When
transporting, make sure the provided battery
cap is attached to the battery. If the battery cap
is misplaced, carry the battery in a plastic bag.
... do not modify or disassemble.
... do not expose the battery to temperatures
exceeding 60°C, as this may cause the battery
to overheat, explode or catch fire.
... use only specified chargers.
2. To prevent damage and prolong service life…
... do not subject to unnecessary shock.
... charge in an environment where temperatures
are within the tolerances shown in the chart
below. This is a chemical reaction type
battery — cooler temperatures impede
chemical reaction, while warmer
temperatures can prevent complete charging.
... store in a cool, dry place. Extended exposure
to high temperatures will increase natural
discharge and shorten service life.
... fully charge and then fully discharge the
battery every 6 months when storing the
battery pack over a long period time.
... remove from charger or powered unit when
not in use, as some machines use current even
when switched off.
CAUTIONS
NOTES:
● It is normal for the battery pack to be warm after
charging, or after use.
Temperature Range Specifications
Charging........10°C to 35°C
Operation ......0°C to 40°C
Storage ..........–10°C to 30°C
● Recharging time is based on room temperature of
20°C.
● The lower the temperature, the longer recharging
takes.
Cassettes
To properly use and store your cassettes, be sure to
read the following cautions:
1. During use…
... make sure the cassette bears the Mini DV
mark.
... be aware that recording onto prerecorded
tapes automatically erases the previously
recorded video and audio signals.
... make sure the cassette is positioned properly
when inserting.
... do not load and unload the cassette
repeatedly without allowing the tape to run at
all. This slackens the tape and can result in
damage.
... do not open the front tape cover. This exposes
the tape to fingerprints and dust.
2. Store cassettes…
... away from heaters or other heat sources.
... out of direct sunlight.
... where they won’t be subject to unnecessary
shock or vibration.
... where they won’t be exposed to strong
magnetic fields (such as those generated by
motors, transformers or magnets).
... vertically, in their original cases.
Master Page: Right
GR-DVP9Asia.book Page 71 Monday, February 10, 2003 1:12 PM
EN
To properly use and store your memory cards, be
sure to read the following cautions:
1. During use…
... make sure the memory card bears the SD or
MultiMediaCard mark.
... make sure the memory card is positioned
properly when inserting.
2. While the memory card is being accessed
(during recording, playback, deletion,
initialisation, etc.)…
... never unload the memory card and never turn
off the camcorder.
3. Store memory cards…
... away from heaters or other heat sources.
... out of direct sunlight.
... where they won’t be subject to unnecessary
shock or vibration.
... where they won’t be exposed to strong
magnetic fields (such as those generated by
motors, transformers or magnets).
LCD Monitor
1. To prevent damage to the LCD monitor,
DO NOT…
... push it strongly or apply any shocks.
... place the camcorder with the LCD monitor on
the bottom.
2. To prolong service life…
... avoid rubbing it with coarse cloth.
3. Be aware of the following phenomena for LCD
monitor use.
These are not malfunctions:
• While using the camcorder, the surface around
the LCD monitor and/or the back of the LCD
monitor may heat up.
• If you leave power on for a long time, the
surface around the LCD monitor becomes hot.
... in places subject to soot or steam such as near
a cooking stove.
... in places subject to excessive shock or
vibration.
... near a television set.
... near appliances generating strong magnetic or
electric fields (speakers, broadcasting
antennas, etc.).
... in places subject to extremely high (over
40°C) or extremely low (under 0°C)
temperatures.
3. DO NOT leave the unit…
... in places of over 50°C.
... in places where humidity is extremely low
(below 35%) or extremely high (above 80%).
... in direct sunlight.
... in a closed car in summer.
... near a heater.
4. To protect the unit, DO NOT…
... allow it to become wet.
... drop the unit or strike it against hard objects.
... subject it to shock or excessive vibration
during transportation.
... keep the lens directed at extremely bright
objects for long periods.
... expose the lens and viewfinder’s lens to direct
sunlight.
... carry it by holding the LCD monitor or the
viewfinder.
... swing it excessively when using the hand strap
or the grip.
... swing the soft camera case excessively when
the camcorder is inside it.
REFERENCES
Memory Cards
71
Main Unit
1. For safety, DO NOT…
... open the camcorder’s chassis.
... disassemble or modify the unit.
... short-circuit the terminals of the battery pack.
Keep it away from metallic objects when not
in use.
... allow inflammables, water or metallic objects
to enter the unit.
... remove the battery pack or disconnect the
power supply while the power is on.
... leave the battery pack attached when the
camcorder is not in use.
2. Avoid using the unit…
... in places subject to excessive humidity or
dust.
CONTINUED ON NEXT PAGE
Master Page: Left
GR-DVP9Asia.book Page 72 Monday, February 10, 2003 1:12 PM
72 EN
5. Dirty heads can cause the following problems:
• No picture during playback.
• Blocks of noise appear during playback.
• During recording or playback, the Head Clog
Warning indicator “ ” appears.
• Recording cannot be performed properly.
In such cases, use an optional cleaning cassette.
Insert it and play back. If the cassette is used more
than once consecutively, damage to the video heads
may result. After the camcorder plays back for about
20 seconds, it stops automatically. Also refer to the
cleaning cassette’s instructions.
If, after using the cleaning cassette, the problems still
exist, consult your nearest JVC dealer.
Mechanical moving parts used to move the video
heads and video tape tend to become dirty and
worn out over time. In order to maintain a clear
picture at all times, periodic check-ups are
recommended after using the unit for about 1,000
hours. For periodic check-ups please consult your
nearest JVC dealer.
How To Handle A CD-ROM
• Take care not to soil or scratch the mirror surface
(opposite to the printed surface). Do not write
anything or put a sticker on either the front or back
surface. If the CD-ROM gets dirty, gently wipe it
with a soft cloth outward from the centre hole
using a circular motion.
• Do not use conventional disc cleaners or cleaning
spray.
• Do not bend the CD-ROM or touch its mirror
surface.
• Do not store your CD-ROM in a dusty, hot or
humid environment. Keep it away from direct
sunlight.
CAUTIONS (cont.)
About moisture condensation...
● You have observed that pouring a cold liquid
into a glass will cause drops of water to form on
the glass’ outer surface. This same phenomenon
occurs on the head drum of a camcorder when
it is moved from a cool place to a warm place,
after heating a cold room, under extremely
humid conditions or in a place directly
subjected to the cool air from an air conditioner.
● Moisture on the head drum can cause severe
damage to the video tape, and can lead to
internal damage to the camcorder itself.
Serious malfunctioning
If malfunctioning occurs, stop using the unit
immediately and consult your local JVC dealer.
The camcorder is a microcomputer-controlled
device. External noise and interference (from a TV,
a radio, etc.) might prevent it from functioning
properly. In such cases, first disconnect its power
supply unit (battery pack, AC Power Adapter/
Charger, etc.) and wait a few minutes and then reconnect it and proceed as usual from the
beginning.
Master Page: Right-Heading0
GR-DVP9Asia.book Page 73 Monday, February 10, 2003 1:12 PM
USER MAINTENANCE
EN
After Use
73
Cleaning The Camcorder
1
2
Turn off the camcorder.
3
Press “PUSH HERE” to close the cassette holder.
● Once the cassette holder is closed, it recedes
automatically. Wait until it recedes completely
before closing the cassette holder cover.
4
Slide down BATT.RELEASE 1 and remove the
battery pack 2 3.
Slide down and hold OPEN/EJECT in the
direction of the arrow, then pull the cassette
holder cover open until it locks. The cassette
holder opens automatically. Remove the cassette.
Cassette holder cover
1
To clean the exterior, wipe gently with a soft
cloth.
Put the cloth in diluted mild soap and wring it
well to wipe off heavy dirt. Then wipe again with
a dry cloth.
2
Open the LCD monitor. Wipe gently with a soft
cloth. Be careful not to damage the monitor.
Close the LCD monitor.
3
To clean the lens, blow it with a blower brush,
then wipe gently with lens cleaning paper.
4
5
Pull out the viewfinder fully.
6
Close the hatch until it locks in place and push
the viewfinder back in.
Cassette holder
Remove.
PUSH HERE
NOTES:
● Avoid using strong cleaning agents such as
benzine or alcohol.
● Cleaning should be done only after the battery
pack has been removed or other power units have
been disconnected.
● Mould may form if the lens is left dirty.
● When using a cleaner or chemically treated cloth
refer to the cautions of each product.
Hatch
Lens blower
REFERENCES
OPEN/EJECT Switch
Open the viewfinder cleaning hatch in the
direction of the arrow A.
Insert a lens blower or soft cloth into the gap at
the side of the viewfinder and clean the interior
of the viewfinder with it B.
● If the gap is narrow, turn the Dioptre
Adjustment Control to widen the gap.
Dioptre Adjustment
Control
BATT.RELEASE Switch
Master Page: Left-Heading0
GR-DVP9Asia.book Page 74 Monday, February 10, 2003 1:12 PM
74 EN
SPECIFICATIONS
Camcorder
For General
Power supply
:
Power consumption
LCD monitor off, viewfinder on :
LCD monitor on, viewfinder off :
Dimensions (W x H x D)
:
Weight
:
Operating temperature
Operating humidity
Storage temperature
Pickup
Lens
:
:
:
:
:
LCD monitor
Viewfinder
Speaker
:
:
:
For Digital Video Camera
Format
Signal format
Recording/Playback format
:
:
:
Cassette
Tape speed
:
:
Maximum recording time
(using 80 min. cassette)
:
For Digital Still Camera
Storage media
Compression system
:
:
File size
Still image
:
DC 6.3 V (Using AC Power Adapter/Charger)
DC 7.2 V (Using battery pack)
Approx. 3.9 W
Approx. 4.7 W
43 mm x 115 mm x 80 mm
(with the LCD monitor closed and the viewfinder pushed back in)
Approx. 350 g
(without grip belt, battery and cassette)
Approx. 420 g
(incl. grip belt, battery and cassette)
0°C to 40°C
35% to 80%
–20°C to 50°C
1/4" CCD
F 1.8, f = 3.8 mm to 38 mm, 10:1 power zoom lens
(It is not possible to attach any lens filter or conversion lens.)
2" diagonally measured, LCD panel/TFT active matrix system
Electronic viewfinder with 0.44" colour LCD
Monaural
DV format (SD mode)
PAL standard
Video : Digital component recording
Audio : PCM digital recording, 32 kHz 4-channel (12-bit), 48 kHz
2-channel (16-bit)
Mini DV cassette
SP: 18.8 mm/s
LP: 12.5 mm/s
SP: 80 min.
LP: 120 min.
SD Memory Card/MultiMediaCard
Still image
: JPEG (compatible)
Moving image : MPEG4 (compatible)
4 modes (1600 x 1200 pixels/1280 x 960 pixels/1024 x 768 pixels/
640 x 480 pixels)
Moving image
: 2 modes (240 x 176 pixels/160 x 120 pixels)
Picture quality
: 2 modes (FINE/STANDARD)
Approximate number of storable images
: 墌 pg. 39
Master Page: Right
GR-DVP9Asia.book Page 75 Monday, February 10, 2003 1:12 PM
EN
For Connectors
S/AV
S-Video input
S-Video output
:
Video input
Video output
Audio input
Audio output
Edit
Headphone output
DV
Input/output
USB
:
:
:
:
:
:
Y: 0.8 V to 1.2 V (p-p), 75 Ω, analogue
C: 0.2 V to 0.4 V (p-p), 75 Ω, analogue
Y: 1.0 V (p-p), 75 Ω, analogue
C: 0.29 V (p-p), 75 Ω, analogue
Y: 0.8 V to 1.2 V (p-p), 75 Ω, analogue
Y: 1.0 V (p-p), 75 Ω, analogue
300 mV (rms), 50 kΩ, analogue, stereo
300 mV (rms), 1 kΩ, analogue, stereo
ø3.5 mm, 2-pole
Stereo
:
:
4-pin, IEEE 1394 compliant
5-pin
:
75
AC Power Adapter/Charger
For General
Power requirement
Power consumption
Output
Charge
VTR
:
:
AC 110 V to 240 Vd, 50 Hz/60 Hz
23 W
:
:
DC 7.2 V G, 1.2 A
DC 6.3 V G, 1.8 A
REFERENCES
Specifications shown are for SP mode unless otherwise indicated. E & O.E. Design and specifications subject
to change without notice.
Master Page: Left-start
GR-DVP9Asia.book Page 76 Monday, February 10, 2003 1:12 PM
76 EN
INDEX Controls, Connectors And Indicators
12 3
4
Y
PLA
OFF A M
8
9
0 qw e
r
t
y
u
i
6
7
5
INDEX
Master Page: Right
GR-DVP9Asia.book Page 77 Monday, February 10, 2003 1:12 PM
EN
77
Controls
Indicators
a •E-Mail Clip Recording Button
[E-MAIL]............................................ 墌 pg. 49
•Information Button [INFO]................ 墌 pg. 26
b Menu Button [MENU].......................... 墌 pg. 31
c •+, – Button ........................................ 墌 pg. 31
•LCD Monitor Brightness Control
[MONITOR BRIGHT +, –]................. 墌 pg. 13
d •Power Zoom Ring [T/W].................... 墌 pg. 18
•Shuttle Search Ring
[SHUTTLE SEARCH, 3/5] ........ 墌 pg. 20
e •Recording Start/Stop Button.............. 墌 pg. 17
•Play/Pause Button [4/9] .................. 墌 pg. 20
f Power Switch [A, M, P, OFF].......... 墌 pg. 13
g Lock Button ......................................... 墌 pg. 13
h Snapshot Button [SNAPSHOT]....... 墌 pg. 23, 41
i •Stop Button [8] ................................. 墌 pg. 20
•Digital Sound Button [D.SOUND]..... 墌 pg. 46
j •Index Button [INDEX] ........... 墌 pg. 26, 46, 56
•Navigation Button [NAVI] ................. 墌 pg. 47
k Set/Select Button [SET/SELECT] ........... 墌 pg. 31
l Battery Release Switch
[BATT.RELEASE] ................................... 墌 pg. 11
m Cassette Open/Eject Switch
[OPEN/EJECT]...................................... 墌 pg. 15
n Thumbnail Storing Button
[NAVI STORE]...................................... 墌 pg. 47
o VIDEO/MEMORY Switch
[VIDEO/MEMORY].............................. 墌 pg. 13
p •Focus Adjustment Button [FOCUS] ... 墌 pg. 43
•Speaker Volume Control [VOL. +] ..... 墌 pg. 20
q •Backlight Compensation Button
[BACK LIGHT]................................... 墌 pg. 45
•Speaker Volume Control
[VOL. –] ............................................ 墌 pg. 20
r Dioptre Adjustment Control ................ 墌 pg. 12
A Power Lamp....................................墌 pg. 13, 17
B Tally Lamp ......................................墌 pg. 17, 37
The connectors are located beneath the covers.
S Digital Video Connector [DV IN/OUT]
(i.Link*).................................... 墌 pg. 51, 52, 62
* i.Link refers to the IEEE1394-1995 industry
specification and extensions thereof. The logo
is used for products compliant with the i.Link
standard.
T USB (Universal Serial Bus)
Connector............................................ 墌 pg. 62
U S/AV connector ....................... 墌 pg. 22, 50, 59
V Headphone Connector [ ] ................ 墌 pg. 56
No sound is output from the speaker when
headphones are connected to this connector.
Y
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
LCD Monitor ..................................墌 pg. 12, 18
Battery Pack Mount ..............................墌 pg. 11
Speaker ................................................墌 pg. 20
Grip Belt/Strap Eyelet.............................墌 pg. 6
Viewfinder............................................墌 pg. 12
Viewfinder Cleaning Hatch ..................墌 pg. 73
Cassette Holder Cover..........................墌 pg. 15
Camera Sensor
Be careful not to cover this area, a sensor
necessary for shooting is built-in here.
Stereo Microphone...............................墌 pg. 56
Info-Shoe
Attach only the optional JVC VL-V3U Video
Light, VL-F3U Flash, MZ-V3U Stereo Zoom
Microphone or MZ-V5U Stereo Microphone.
Make sure to turn off the power of the camcorder
and the video light, flash or microphone before
attaching and removing them.
Lens
Lens Cover............................................墌 pg. 17
Grip Belt Eyelet ......................................墌 pg. 6
Remote Sensor .....................................墌 pg. 54
Tripod Mounting Socket .......................墌 pg. 12
Card Cover [MEMORY CARD] ............墌 pg. 16
REFERENCES
Connectors
Other Parts
Master Page: Left-Heading0
GR-DVP9Asia.book Page 78 Monday, February 10, 2003 1:12 PM
78 EN
INDEX Indications
Indications
LCD Monitor/Viewfinder Indications During
Video Recording Only
1h40m
REC
SOUND 12 b i t
r
15:55
a Navigation Indicator
(墌 pg. 47)
(Appears when “NAVIGATION” is set to other
than “MANUAL”.)
b Selected Wipe/Fader Effect Indicator
(墌 pg. 32)
c Tape Running Indicator
(墌 pg. 17)
(Rotates while tape is running.)
d Selected Wide Mode Indicator
(墌 pg. 37)
e Thumbnail Storing Indicator
(墌 pg. 47)
(Appears while the captured image is being
stored as a thumbnail image in the memory
card.)
f Recording Speed Mode (SP/LP)
(墌 pg. 34)
g Tape Remaining Time
(墌 pg. 17)
h •REC: (Appears during recording.)
(墌 pg. 17)
•PAUSE: (Appears during Record-Standby
mode.)
(墌 pg. 17)
i Insert Editing/Insert Editing Pause Mode
(墌 pg. 57)
j 5S/Anim.: Displays the 5-Second Recording
mode or Animation recording mode. (墌 pg. 36)
k Wind Cut Indicator
(墌 pg. 37)
l Sound Mode Indicator
(墌 pg. 34)
(Appears for approx. 5 seconds after turning on
the camcorder.)
m Time Code
(墌 pg. 38, 41)
n Digital Image Stabiliser (“DIS”)
(墌 pg. 36)
LCD Monitor/Viewfinder Indications During
D.S.C. Recording Only
(Appears and blinks during shooting.)
c Card Icon
(墌 pg. 23)
: Appears during shooting.
: Blinks in white when a memory card is not
loaded.
: Blinks in yellow while the camcorder is
reading the data in the memory card such as
titles/frames, NAVIGATION thumbnail
images, video clips, still images, etc.
d Picture Quality:
(FINE) and
(STANDARD) (in order of quality)
(墌 pg. 39)
e Remaining Number Of Shot
(墌 pg. 23)
(Displays the approximate remaining number of
shots that can be stored during D.S.C. recording,
or the remaining number of storable thumbnail
images when it reaches 10 or less during video
recording. The number increases or decreases
depending on the Picture Quality/Image Size,
etc.)
LCD Monitor/Viewfinder Indications During
E-Mail Clip Recording
LCD Monitor/Viewfinder Indications During
Both Video And D.S.C. Recording
9g
8
2
5
1
3
4
6
40 x W
0
T
O
3
3
q
w
EXPLOSION
1 0 . 11 . 0 3
10 : 00
15
t
a Image Size: 1600 (1600 x 1200), 1280
(1280 x 960), 1024 (1024 x 768) or 640
(640 x 480)
(墌 pg. 39)
b Shooting Icon
(墌 pg. 23)
0h 10
: m
00 : 15
a Image Size: 240 (240 x 176), 160 (160 x 120)
(墌 pg. 38)
b Shooting Icon
(墌 pg. 23)
(Appears and blinks during shooting.)
c E-Mail Clip Recording Indicator
(墌 pg. 48)
d Memory Card Remaining Time For E-Mail Clip
Recording
(墌 pg. 48)
e E-Mail Clip Recording Time
(墌 pg. 48)
7
1024
E-CL I P
160
a Operation Mode
b
: Gain Up Mode
e
r
(墌 pg. 13)
(墌 pg. 35)
Master Page: Right
GR-DVP9Asia.book Page 79 Monday, February 10, 2003 1:12 PM
EN
d
e
f
g
h
i
j
k
l
m
n
o
f
g
h
i
j
•9 U : Forward Frame-By-Frame Playback/
Slow-Motion
•Y 9 : Reverse Frame-By-Frame Playback/SlowMotion
•D : Audio Dubbing
•9D : Audio Dubbing Pause
(Appear while a tape is running.)
Sound Input For Audio Dubbing
(墌 pg. 56)
Battery Indicator
(墌 pg. 80)
Date/Time
(墌 pg. 38, 41)
•VOLUME : Volume Level Indicator (Speaker or
headphone)
(墌 pg. 20)
(The level indicator g moves.)
•BRIGHT : Brightness Control Indicator (LCD
monitor/Viewfinder)
(墌 pg. 13)
(The level indicator g moves.)
Time Code
(墌 pg. 38, 41)
LCD Monitor/Viewfinder Indications During
D.S.C. Playback
1
2
100-0013
LCD Monitor/Viewfinder Indications During
Video Playback
BR I GHT
4
1
2
34 5
6
a
b
c
d
1 2 b i t / SOUND 1
L
BLANK SEARCH
PUSH "STOP" BUTON
TO CANCEL
MIC
VO L UME
1 0 . 01 . 0 3
10 : 00
20 : 21 : 25
0
9 g
7
8
a Sound Mode Indicator
(墌 pg. 40)
b Blank Search Indicator
(墌 pg. 21)
c Thumbnail Storing Indicator
(墌 pg. 47)
(Appears while the captured image is being
stored as a thumbnail image in the memory
card.)
d Tape Speed
(墌 pg. 34)
e •U : Playback
•5 : Fast-Forward/Shuttle Search
•3 : Rewind/Shuttle Search
•9 : Pause
g
3
Operation Mode Indicator
(墌 pg. 26)
Folder/File Number
(墌 pg. 26)
Battery Indicator
(墌 pg. 80)
Brightness Control Indicator (LCD monitor/
Viewfinder)
(墌 pg. 13)
(The level indicator g moves.)
REFERENCES
c
(Appears when “GAIN UP” is set to “AUTO”
and the shutter speed is automatically
adjusted.)
Flash Indicator
(Appears when the optional flash attached to the
info-shoe is ready.)
White Balance Indicator
(墌 pg. 45)
• : Backlight Compensation Indicator
(墌 pg. 45)
•±: Exposure Adjustment Indicator (墌 pg. 44)
Selected Program AE With Special Effects
Indicator
(墌 pg. 33)
Iris Lock Indicator
(墌 pg. 44)
Approximate Zoom Ratio
(墌 pg. 18)
(Appears during zooming.)
Zoom Indicator
(墌 pg. 18)
(Appears during zooming.)
(The level indicator g moves.)
Self-Timer Recording Indicator
(墌 pg. 42)
O: (Appears when taking Snapshot.)
(墌 pg. 41)
•
EXPLOSION: Selected Digital Sound Effect
(墌 pg. 46)
•BRIGHT: Brightness Control Indicator (LCD
monitor/Viewfinder)
(墌 pg. 13)
(The level indicator moves.)
Battery Indicator
(墌 pg. 80)
Date/Time
(墌 pg. 14)
Manual Focus Adjustment Indicator (墌 pg. 43)
79
Master Page: Left-Heading0
GR-DVP9Asia.book Page 80 Monday, February 10, 2003 1:12 PM
80 EN
INDEX Indications (cont.)
Warning Indications
Indications
Function
Displays the battery remaining power.
Remaining power level: high
Remaining power level: exhausted
As the battery power comes close to nil, the battery indicator blinks.
When the battery power is exhausted, power turns off automatically.
Appears when no tape is loaded.
(墌 pg. 15)
Appears when the erase protection tab is set to “SAVE” while the Power Switch is
CHECK TAPE’S ERASE
set to “A” or “M” and the VIDEO/MEMORY Switch is set to “VIDEO”.
PROTECTION TAB
(墌 pg. 13)
Appears if dirt is detected on the heads during recording. Use an optional
cleaning cassette.
(墌 pg. 73)
HEAD CLEANING
REQUIRED USE
CLEANING CASSETTE
CONDENSATION
OPERATION PAUSED
PLEASE WAIT
TAPE!
TAPE END
Appears if condensation occurs. When this indication is displayed, wait more
than 1 hour until condensation disappears.
Appears if a tape is not loaded when the Recording Start/Stop Button or
SNAPSHOT Button is pressed while the Power Switch is set to “A” or “M” and
the VIDEO/MEMORY Switch is set to “VIDEO”.
Appears when the tape ends during recording or playback.
(墌 pg. 64)
SET DATE/TIME!
● Appears when the date/time is not set.
(墌 pg. 14)
● Appears when the built-in clock (lithium) battery is discharged and the
previously set date/time is erased.
(墌 pg. 14)
LENS COVER
Appears for 5 seconds after power is turned on if the lens cover is not slid down.
A. DUB ERROR!
Appears if Audio Dubbing is attempted on a blank portion of a tape. (墌 pg. 56)
A. DUB ERROR!
<CANNOT DUB ON A
LP RECORDED TAPE>
<CANNOT DUB ON A
16bit RECORDING>
<CHECK TAPE’S
ERASE PROTECTION
TAB>
<NO SOUND STORED>
<MEMORY CARD!>
● Appears if Audio Dubbing is attempted on a tape recorded in the LP mode.
(墌 pg. 56)
● Appears if Audio Dubbing is attempted on a tape recorded in 16-bit audio.
(墌 pg. 56)
● Appears if A. DUB (D) on the remote control is pressed when the erase
protection tab is set to “SAVE”.
(墌 pg. 56)
● Appears if Audio Dubbing using Digital Sound Effects is attempted when a
memory card is not loaded.
(墌 pg. 56)
INSERT ERROR!
Appears if Insert Editing is attempted on a blank portion of a tape.
(墌 pg. 57)
Master Page: Right
GR-DVP9Asia.book Page 81 Monday, February 10, 2003 1:12 PM
EN
Indications
81
Function
● Appears if Insert Editing is attempted on a tape recorded in the LP mode.
INSERT ERROR!
(墌 pg. 57)
<CANNOT EDIT ON A
LP RECORDED TAPE> ● Appears if INSERT (I) on the remote control is pressed when the erase
protection tab is set to “SAVE”.
(墌 pg. 57)
<CHECK TAPE’S
ERASE PROTECTION
TAB>
MEMORY IS FULL
Appears when the memory card’s memory is full and shooting is not possible.
COPYING FAILED
● Appears if dubbing of copyguarded signals is attempted while this camcorder is
being used as a recorder.
● Appears in the following cases when dubbing from a tape to a memory card (as
digital stills or video clips):
– when no memory card is loaded.
– when the memory card’s memory is full.
– when the memory card is not formatted.
– when a write-protected SD Memory Card is loaded.
(墌 pg. 49, 53)
MEMORY CARD!
Appears if there is no memory card loaded when you attempt to record on a
memory card or access data on a memory card.
PLEASE FORMAT
Appears when there is a problem with a memory card and its memory is corrupt,
or it has not been initialised. Initialise the memory card.
(墌 pg. 30)
NO SOUND STORED
Appears if there are no sound files stored in the memory card when you attempt
to use digital sound effects.
NO IMAGES STORED
Appears if there are no image files stored in the memory card when you attempt
memory card playback.
NO E-MAIL CLIP
STORED
Appears if there are no video clip files stored in the memory card when you
attempt memory card playback.
PICTURE SELECTION Appears when NAVI STORE is pressed to make a thumbnail image before
NOT FOUND
recording or playback.
(墌 pg. 46, 47)
● Appears when a file in a format other than MP3 is selected.
UNSUPPORTED FILE! ● Appears when playing back a file that is not compatible with DCF or a file with
a size that is not compatible with this camcorder.
● Appears when you attempt to shoot digital still images when the write
CHECK CARD’S WRITE
protection tab on the SD Memory Card is set to the “LOCK” position.
PROTECTION SWITCH ● Appears when you attempt MEMORY SELECT menu operation with a writeprotected SD Memory Card loaded.
The error indications (E01, E02 or E06) show what type of malfunction has
E01, E02 or E06
occurred. When an error indication appears, the camcorder turns off
UNIT IN SAFEGUARD
automatically. Remove the power supply (battery, etc.) and wait a few minutes for
MODE REMOVE AND
the indication to clear. When it does, you can resume using the camcorder. If the
REATTACH BATTERY
indication remains, consult your nearest JVC dealer.
The error indications (E03 or E04) show what type of malfunction has occurred.
E03 or E04
When an error indication appears, the camcorder turns off automatically. Eject
UNIT IN SAFEGUARD
the cassette once and re-insert it, then check if the indication clears. When it
MODE EJECT AND
does, you can resume using the camcorder. If the indication remains, consult
REINSERT TAPE
your nearest JVC dealer.
REFERENCES
CARD ERROR!
Appears when the camcorder does not recognise the loaded memory card.
Remove the memory card once and insert it again. Repeat these procedures until
no indication appears. If the indication still appears, the memory card is
corrupted.
Master Page: Left-start
GR-DVP9Asia.book Page 82 Monday, February 10, 2003 1:12 PM
82 EN
TERMS
TERMS
A
G
AC Power Adapter/Charger ...........................10, 11
Animation ...........................................................36
Audio Dubbing ...................................................56
Auto Focus ..........................................................43
Auto Playback Of Images ....................................24
Auto Shut Off ................................................17, 23
Gain Up (GAIN UP) ............................................ 35
Grip Adjustment ................................................. 12
B
Backlight Compensation ......................................45
Battery Pack ............................................10, 11, 70
Beep (BEEP) .........................................................37
Blank search (BLANK SRCH) .........................21, 40
Brightness Adjustment Of The Display ................13
Built-in Clock’s Rechargeable Lithium Battery .....14
C
Changing The Menu Settings ...............................31
Channels (Left/Right) ...........................................40
Charging The Battery Pack ..................................10
Cleaning The Camcorder .....................................73
Clock adjustment (CLOCK ADJ.) .........................14
Connections
Charging .................................................10, 11
Dubbing ............................................... 50 – 53
Random Assemble Editing ..................... 58 – 61
To A PC ........................................................62
To A TV Or VCR ...........................................22
WebCam ......................................................63
D
Date/Time
Display (DATE/TIME) ..............................38, 41
Settings .........................................................14
DCF (Design rule for Camera File system) .....23, 24
Deleting Files (DELETE) .......................................28
Deleting thumbnail images (NAVI.DEL.) ..............40
Demonstration Mode (DEMO MODE) .............9, 37
Digital Image Stabilisation (DIS) ..........................36
Digital Sound Effects ...............................25, 46, 56
Display setting (ON SCREEN) ..............................38
DPOF Setting (Digital Print Order Format) .....29, 30
Dubbing ...................................................... 50 – 53
Dubbing from tape to memory card
(
COPY) .........................................40, 53
E
E-Mail Clip Recording (E-CLIP REC) .........38, 48, 49
Erase Protection .............................................15, 16
Exposure Control (EXPOSURE) ............................44
F
Fade-In/Out .........................................................32
Fast-Forward The Tape ........................................20
Frame-By-Frame Playback ...................................55
I
Image Size (IMAGE SIZE) .................................... 39
Index Playback Of Files ...................................... 26
Indications on the LCD Monitor/Viewfinder .. 78, 79
Indicators .................................................... 32 – 41
Initialising A Memory Card (FORMAT) ................ 30
Insert Editing ....................................................... 57
Interface Shooting ............................................... 18
Iris ...................................................................... 44
Iris Lock .............................................................. 44
J
Journalistic Shooting ........................................... 18
L
Loading A Cassette .............................................. 15
Loading A Memory Card ..................................... 16
M
Manual Focus ..................................................... 43
Memory Card ................................................ 16, 71
Menu Screen
CAMERA ................................................ 34, 35
CAMERA DISPLAY ....................................... 38
DSC .............................................................. 39
D.S.C. Playback .................................... 26 – 30
MANUAL ............................................... 36, 37
SYSTEM ............................................ 37, 38, 40
VIDEO .......................................................... 40
VIDEO DISPLAY ........................................... 41
Motor Drive Mode .............................................. 42
MultiMediaCard ............................................ 16, 71
N
Navigation (NAVIGATION) .................... 35, 46, 47
Master Page: Right
GR-DVP9Asia.book Page 83 Monday, February 10, 2003 1:12 PM
EN
83
P
T
Picture Quality (QUALITY) ..................................39
Playback sound
(SOUND MODE, 12bit MODE) ...........................40
Playback Special Effects ......................................55
Playback Zoom ...................................................55
Power Switch Position .........................................13
Priority Setting (PRIORITY) ..................................38
Program AE With Special Effects (PROGRAM AE)
Classic Film (CLASSIC FILM) .........................34
Mirror (MIRROR) ..........................................34
Monotone (MONOTONE) ............................34
Night-Scope (NIGHTSCOPE) ........................33
Sepia (SEPIA) .................................................34
Shutter Speed (SHUTTER) .............................33
Snow (SNOW) ..............................................33
Sports (SPORTS) ............................................33
Spotlight (SPOTLIGHT) .................................33
Strobe (STROBE) ...........................................34
Twilight (TWILIGHT) ....................................33
Protecting Files (PROTECT) .................................27
Provided Accessories .............................................5
Tally Lamp (TALLY) ....................................... 17, 37
Telephoto setting (TELE MACRO) ........................ 36
Time Code (TIME CODE) ........................ 19, 38, 41
Tripod Mounting ................................................. 12
R
Random Assemble Editing ........................... 58 – 61
Recording media selection (REC SELECT) ............39
Recording Mode (REC MODE) ......................34, 40
Recording Time
Memory Card ................................................49
Tape .............................................................15
Record-Standby ...................................................17
Remaining Power Level .......................................80
Remote Control ...................................................54
Remote control setting (REMOTE) ........................37
Resetting Menu Settings (CAM RESET) .................38
Resetting The File Name ......................................29
Rewind The Tape ................................................20
U
Unloading A Cassette .......................................... 15
Unloading A Memory Card ................................. 16
V
VIDEO/MEMORY Switch Position ....................... 13
Viewfinder Adjustment ....................................... 12
W
WebCam ............................................................ 63
White Balance (W.BALANCE) ....................... 34, 45
Wide Mode (WIDE MODE)
Cinema (CINEMA) ........................................ 37
Squeeze (SQUEEZE) ..................................... 37
Wide (D.WIDE) ............................................ 37
Wind Cut (WIND CUT) ....................................... 37
Wipe In/Out ........................................................ 32
Z
Zooming (ZOOM) ......................................... 18, 35
5-Second Recording (5S) ..................................... 36
SD Memory Card ..........................................16, 71
Self-Timer (SELF-TIMER) ................................36, 42
Set Remote/VCR Code .........................................58
Shuttle Search .....................................................21
Slow-Motion Playback ........................................55
Snapshot .......................................................23, 41
Snapshot Mode (SNAP MODE) ............................35
Sound input (SOUND IN) ....................................38
Sound Mode (SOUND MODE) ......................34, 40
Speaker Volume ..................................................20
Specifications ................................................74, 75
Still Playback .......................................................20
S-Video/AV input (S/AV INPUT) ....................40, 50
Synchro adjustment (SYNCHRO) .........................61
TERMS
S
Master Page: Cover4
GR-DVP9Asia.book Page 84 Monday, February 10, 2003 1:12 PM
EN
GR-DVP9
®Registered Trademark owned by VICTOR COMPANY OF JAPAN, LTD. AA/AG/AH/AC
COPYRIGHT© 2003 VICTOR COMPANY OF JAPAN, LTD.
GR-DVP9Asia_12Cover4.fm
Printed in Japan
0303-FO-ID-VP
Page 84
Master Page: Sheet-Cov
_001EN_SHEET_M3D7S-Sheet_p1-7.fm Page 1 Wednesday, December 4, 2002 6:43 PM
ENGLISH
SOFTWARE INSTALLATION AND
USB CONNECTION GUIDE
LYT1085-001A
COPYRIGHT © 2003 VICTOR COMPANY OF JAPAN, LTD.
M3D7/D3/D1
Printed in Japan
0103-FO-ID-VP
JVC SOFTWARE LICENSE AGREEMENT
IMPORTANT
TO CUSTOMERS:
PLEASE MAKE SURE TO READ THIS CAREFULLY BEFORE INSTALLING
OR USING THE SOFTWARE PROGRAM NAMED “DIGITAL PHOTO
NAVIGATOR” (“Program”) ON YOUR PC.
The right to use the Program is granted by Victor Company of Japan, Limited (“JVC”) to You only on the
condition that You agree to the following.
Should You not agree to the terms hereof, You may not install or use the Program. HOWEVER, INSTALLING
OR USING THE PROGRAM INDICATES YOUR ACCEPTANCE OF THESE TERMS AND CONDITIONS.
1 COPYRIGHT; OWNERSHIP
You acknowledge that all copyrights and other intellectual property rights in the Program are owned by
JVC and its licensor, and remain vested in JVC and such licensor. The Program is protected under the
copyright law of Japan and other countries, and related Conventions.
2 GRANT OF LICENSE
(1) Subject to the conditions of this Agreement, JVC grants to You a non-exclusive right to use the Program.
You may install and use the Program on a HDD or other storage devices incorporated in Your PC.
(2) You may make one (1) copy of the Program solely for your personal backup or archival purposes.
3 RESTRICTION ON THE PROGRAM
(1) You may not reverse engineer, decompile, disassemble, revise or modify the Program, except to the
extent that expressly permitted by applicable law.
(2) You may not copy or use the Program, in whole or in part, other than as expressly specified in this
Agreement.
(3) You have no right to grant a license to use the Program, and may not distribute, rent, lease or transfer
the Program to any third party or otherwise let them use the Program.
4 LIMITED WARRANTY
JVC warrants that any media in which the Program is embodied are free from any defects in materials and
workmanship for a period of thirty (30) days from the date of Your purchasing any our products
accompanying the Program. JVC’s entire liability and your exclusive remedy in connection with the
Program shall be replacement of such defective media. EXCEPT FOR THE EXPRESS WARRANTIES STATED
HEREIN AND TO THE EXTENT PERMITTED BY APPLICABLE LAW, JVC AND ITS LICENSORS DISCLAIM
ANY OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IN
REGARD TO THE PROGRAM AND THE ACCOMPANYING PRINTED MATERIALS. SHOULD THERE BE
ANY PROBLEM ARISING FROM OR CAUSED BY THE PROGRAM, YOU SHOULD SETTLE ALL SUCH
PROBLEM AT YOUR OWN COST AND EXPENSE.
—1—
_001EN_SHEET_M3D7S-Sheet_p1-7.fm
Page 1
Master Page: Right
_001EN_SHEET_M3D7S-Sheet_p1-7.fm Page 2 Wednesday, December 4, 2002 6:43 PM
5 LIMITED LIABILITY
TO THE EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL JVC AND ITS LICENSORS BE
LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES WHATSOEVER,
REGARDLESS OF THE FORM OF ACTION WHETHER IN CONTRACT, TORT OR OTHERWISE ARISING
OUT OF OR IN CONNECTION WITH THE USE OF OR INABILITY TO USE THE PROGRAM, EVEN IF
JVC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. YOU WILL INDEMNIFY AND
HOLD HARMLESS JVC FROM ANY LOSS, LIABILITY OR COST ARISING OUT OF OR IN ANY WAY
CONNECTED TO CLAIMS FROM ANY THIRD PARTY RELATING TO THE USE OF THE PROGRAM.
6 TERM
This Agreement will become effective on the date when You install and use the Program on Your machine,
and continue to be in effect until the termination under the following provision.
Should You breach any provision of this Agreement, JVC may terminate this Agreement without giving any
notice to You. In this event, JVC may claim against You for any damages caused by Your breach. Should
this Agreement be terminated, You must immediately destroy the Program stored in Your machine
(including the erasing from any memory in Your PC), and no longer own such Program.
7 EXPORT CONTROL
You agree that You will not ship, transfer or export the Program or underlying information and technology
to any countries to which Japan and other relevant countries have initiated an embargo on such goods.
8 U.S. GOVERNMENT USER
If You are an agency of the United States of America (the “Government”), You acknowledge JVC’s
representation that the Program is a “Commercial Item” as defined in Federal Acquisition Regulation (FAR)
part 2.101 (g) consisting unpublished “Commercial Computer Software” as those items are used at FAR
part 12.212 and is only licensed to You with the same use rights JVC grants all commercial end users
pursuant to the terms of this Agreement.
9 GENERAL
(1) No modification, change, addition, deletion or other alternation of or to this Agreement will be valid
unless reduced to writing and signed by an authorized representative of JVC.
(2) If any part of this Agreement is held invalid by or in conflict with any law having jurisdiction over this
Agreement, the remaining provisions will remain in full force and effect.
(3) This Agreement shall be governed by and interpreted under the laws of Japan. The Tokyo District Court
has jurisdiction over all disputes which may arise with respect to the execution, interpretation and
performance of this Agreement.
Victor Company of Japan, Limited
Note:
If You acquired the Program in Germany, the provisions of Sections 4 (Limited Warranty) and 5 (Limited
Liability) provided above will be replaced with those of the German version of this Agreement.
CAUTION:
● Operate this equipment according to the operating procedures described in this manual.
● Use only the provided CD-ROM. Never use any other CD-ROM to run this software.
● Do not attempt to modify this software.
● Changes or modifications not approved by JVC could void user’s authority to operate the equipment.
How to handle a CD-ROM
● Take care not to soil or scratch the mirror surface (opposite to the printed surface). Do not write anything
or put a sticker on either the front or back surface. If the CD-ROM gets dirty, gently wipe it with a soft
cloth outward from the center hole using a circular motion.
● Do not use conventional disc cleaners or cleaning spray.
● Do not bend the CD-ROM or touch its mirror surface.
● Do not store your CD-ROM in a dusty, hot or humid environment. Keep it away from direct sunlight.
● You can find the latest information (in English) on the provided software program at our world wide web
server at http://www.jvc-victor.co.jp/english/index-e.html
—2—
_001EN_SHEET_M3D7S-Sheet_p1-7.fm
Page 2
Master Page: Right
_001EN_SHEET_M3D7S-Sheet_p1-7.fm Page 3 Wednesday, December 4, 2002 6:43 PM
Notice for Users
Use of this software is authorized according to the terms of the software license.
When contacting the nearest JVC office or agency in your country about this software (refer to the JVC
Worldwide Service Network at http://www.jvc-victor.co.jp/english/worldmap/index-e.html), please fill out the
following and have the appropriate information ready.
Product Name
Model
Problem
Error Message
Manufacturer
□ Desktop
Model
PC
□ Laptop
CPU
OS
Memory
MB
Available Hard Disk Space
MB
Please note that it may take some time to respond to your questions, depending on their subject matter.
JVC cannot answer questions regarding basic operation of your PC, or questions regarding specifications or
performance of the OS, other applications or drivers.
Operating Environment
The following requirements must be satisfied to connect a camcorder to a PC and to use Digital Photo
Navigator.
Windows®
OS
: Windows® 98 (pre-installed),
Windows® 98 Second Edition (98SE) (pre-installed),
Windows® Millennium Edition (Me) (pre-installed),
Windows® 2000 Professional (2000) (pre-installed),
Windows® XP Home Edition (XP) (pre-installed),
or Windows® XP Professional (XP) (pre-installed)
CPU
: Intel MMX® Pentium®, at least 200 MHz
RAM
: At least 64 MB recommended
Free hard disk space
: At least 10 MB for installation, at least 500 MB recommended
Connector
: USB connector
Display
: Must be capable of displaying 800 x 600 dots with 16-bit color
Miscellaneous
: Internet Explorer 5.5 or later
—3—
_001EN_SHEET_M3D7S-Sheet_p1-7.fm
CONTINUED ON NEXT PAGE
Page 3
Master Page: Right
_001EN_SHEET_M3D7S-Sheet_p1-7.fm Page 4 Wednesday, December 4, 2002 6:43 PM
䡲 For ImageMixer with VCD
In addition to the requirements on the previous page, the following requirements must be satisfied to use
ImageMixer with VCD.
OS
: The same as requirements on the previous page.
However, Windows® 98 cannot be used when you connect a camcorder to the
PC with a USB cable.
Windows® 98, Windows® 98SE cannot be used when you connect a camcorder
to the PC with a IEEE1394 (DV) cable.
CPU
: For capturing video via a USB cable or IEEE1394 (DV) cable, Intel Pentium® III, at
least 500 MHz, at least 800 MHz recommended
Free hard disk space
: At least 300 MB for installation, at least 1 GB recommended
Connector
: IEEE1394 (i.LINK) connector
Miscellaneous
: DirectX 8.0a or later
Macintosh
Hardware
: iMac, iBook, eMac, Power Mac G4, PowerBook G3 or G4 equipped with a USB
connector
OS
: Mac OS 9.0.4 to 9.2.2
Exclude Mac OS X and Mac OS X [Classic]
RAM
: At least 64 MB recommended
䡲 For ImageMixer with VCD
In addition to the requirements above, the following requirements must be satisfied to use ImageMixer with
VCD.
CPU
: At least PowerPC G3/400 MHz or PowerPC G4/400 MHz
RAM
: At least 128 MB recommended
Free hard disk space
: At least 150 MB for installation, at least 1 GB recommended
Display
: Must be capable of displaying 800 x 600 dots with 32,000 color
Miscellaneous
: QuickTime 4 or later
● The system requirements information above is not a guarantee that the provided software will work on all
personal computers meeting those requirements.
● If your PC does not meet the system requirements above, you can use the optional USB reader/writer
CU-VUSD70, the PC card adapter CU-VPSD60 or the floppy disk adapter CU-VFSD50 to load the files in
the memory card to the hard disk on your PC.
(Refer to “JVC Accessories” on our world web site at: http://www.jvc-victor.co.jp/english/accessory/)
● Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
● Macintosh is a registered trademark of Apple Computer, Inc.
● Other product and company names included in this instruction manual are trademarks and/or registered
trademarks of their respective holders.
—4—
_001EN_SHEET_M3D7S-Sheet_p1-7.fm
Page 4
Master Page: Right
_001EN_SHEET_M3D7S-Sheet_p1-7.fm Page 5 Wednesday, December 4, 2002 6:43 PM
Software Installation (Windows®)
Follow the procedure described below to install the software. From the [Setup] screen in step 3, you can
install the following drivers or software. Quit any other software you are using. (Check that there are no other
application icons on the status bar.)
USB Mass Storage Class driver
This driver allows your PC to read and write memory cards in the camcorder.
Windows® Me/2000/XP:
Since there is no need to install this driver, the item is not displayed. Simply connect the camcorder to the PC
with a USB cable, and you can read and write memory cards in the camcorder.
Windows® 98/98SE:
Be sure NOT to connect the USB cable between the camcorder and the PC before installing the driver.
USB Video Streaming driver
This driver allows you to record camcorder’s audio and video output on your PC’s hard disk instead of
camcorder’s video tape. You can also use the camcorder to conduct a video conference over the Internet.
NOTES:
● Windows® 98/98SE/Me/2000: Be sure not to connect the USB cable between the camcorder and the PC
before installing the driver.
● Windows® XP: The installation procedure differs from that of other operating systems and the item is not
displayed. For details, see “Installing USB Video Streaming driver for Windows® XP users” (墌 pg. 8).
ImageMixer with VCD 1.1
This application is used to capture still images and video clips from a camcorder through a USB connector or
IEEE1394 (i.LINK) connector, and is also used to manage and edit the still images and video clips, and to
create Video CDs.
Digital Photo Navigator 1.0
This application is used to capture still images and convert them into a variety of formats.
G.726 decoder
This is an audio decoder for video clips created by the camcorder (extension “.asf”).
NOTE:
Install G.726 decoder only when the camcorder is equipped with E-Mail Clip Recording function.
Adobe® Acrobat® Reader 5.0
This application is used to read PDF files.
1 Load the provided CD-ROM in the PC.
After a moment, the [Important Notice] screen appears.
● If the [Important Notice] screen does not appear, double-click [My Computer] and then double-click the
CD-ROM icon.
2 Confirm the contents and then click [Next].
After a moment, the [Setup] screen appears.
From the [Setup] screen, you can install the desired driver or software.
—5—
_001EN_SHEET_M3D7S-Sheet_p1-7.fm
CONTINUED ON NEXT PAGE
Page 5
Master Page: Right
_001EN_SHEET_M3D7S-Sheet_p1-7.fm Page 6 Wednesday, December 4, 2002 6:43 PM
3 Click [Install] on the right side of the desired software and follow the on screen instructions to
complete the installation.
The installation of the selected driver or software starts. The procedure differs depending on the driver or
the software.
The following is the example of USB Mass
Storage Class driver on Windows® 98SE.
[Installation Folder] screen appears.
The following is the example of Digital Photo
Navigator on Windows® 98SE.
[License Agreement] screen appears.
Click [Finish].
Then, [InstallShield Wizard] screen appears.
Click [Yes].
Then, [Choose Destination Location] screen
appears.
Click [Next].
When the installation is finished, [InstallShield
Wizard Complete] screen appears.
Click [Next].
Next, [Select Program Folder] screen appears.
Click [Finish] and then [Setup] screen reappears.
Click [Next].
—6—
_001EN_SHEET_M3D7S-Sheet_p1-7.fm
CONTINUED ON NEXT PAGE
Page 6
Master Page: Right
_001EN_SHEET_M3D7S-Sheet_p1-7.fm Page 7 Friday, December 13, 2002 12:12 PM
[Setup Status] screen appears. Wait for a
moment until the installation is finished.
When the installation is finished, [Digital Photo
Navigator Setup] screen appears and asks you if
you want to create the icon on the desktop.
If you need it, click [Yes]. If not, click [No].
4 When the message asking whether it is OK to restart the PC appears, click [Yes].
The PC restarts, and after a moment the [Setup] screen from step 1 appears.
5 Repeat steps 3 and 4 to install all of the desired software.
Installing [ImageMixer with VCD 1.1]
When the error message below appears while installing ImageMixer, click [OK] to complete installation.
NOTES:
● The Digital Photo Navigator and ImageMixer with VCD instruction manual is included on the CD-ROM
in PDF format. Double-click the [JVC] folder and then double-click the [Docs] folder. Open the
“Start.pdf” file and click the button of the desired language. Note that Adobe® Acrobat® Reader must be
installed to read PDF files.
● For details on how to use Windows® NetMeeting® or Windows® Messenger (Windows® XP only), refer to
“Appendix” in the Digital Photo Navigator instruction manual on the CD-ROM.
● When installing the [ImageMixer with VCD 1.1], select the desired language in the [Choose Setup
Language] screen.
● If you perform installation of a software that is already installed, uninstallation will start. In this case,
perform the installation again after uninstallation is finished.
● DirectX is necessary so that USB Video Streaming driver works properly. To install DirectX, select
“DirectX” on the installation screen of ImageMixer with VCD 1.1.
● When you install USB Video Streaming driver with Windows® 2000 and Windows® XP, a warning
message dialog box on digital signature may appear. In this case, click [OK] to continue installation
because this problem has no effect on the use of the driver.
● When you install ImageMixer with VCD 1.1 with Windows® 2000 and Windows® XP, the [Microstaff
WINASPI] screen appears. Click [Next] to continue installation.
—7—
_001EN_SHEET_M3D7S-Sheet_p1-7.fm
CONTINUED ON NEXT PAGE
Page 7
Master Page: Right
_001EN_SHEET_M3D7S-Sheet_p8-16.fm Page 8 Wednesday, December 4, 2002 6:47 PM
Installing USB Video Streaming driver for Windows® XP users
When you connect the camcorder to the PC, four drivers are installed in succession by following the
procedures below.
NOTES:
Click [Continue Anyway] when the message [Has not passed Windows Logo testing] appears. Be sure not
to select [Stop Installation]. If you do so, the USB Video Streaming drivers will not be installed correctly.
1 Connect the camcorder to the PC with a USB cable.
After a moment, the [Found New Hardware Wizard] screen appears.
● Refer to “Connecting the USB cable” (墌 pg. 9).
2 Click [Install from a list or specific location (Advanced)] and then click [Next].
The driver search screen appears.
3 Click the next three items in the order below.
● [Search for the best driver in these location]
● [Include this location in the search]
● [Browse]
4 Double-click [My Computer] on the desktop.
5 Double-click the CD-ROM drive icon and the [XP] folder, and then click [OK].
6 Click [Next].
● The warning message dialog box appears.
7 Click [Continue Anyway].
After a moment, the [Found New Hardware Wizard] screen appears.
8 Click [Finish].
After a moment, the [Found New Hardware Wizard] screen appears again.
9 Repeat steps 2 to 8 until the [Found New Hardware Wizard] screen is cleared.
After you repeat steps 2 to 8 four times, the installation of the USB Video Streaming driver is complete.
Updating [Device Manager] (Windows®)
If the camcorder is connected to the PC with the USB cable before installing [USB Mass Storage Class driver]
or [USB Video Streaming driver], the installation might not be performed properly.
In this case, follow the procedure described below to update the [Device Manager] and install [USB Mass
Storage Class driver] and [USB Video Streaming driver] properly.
NOTE:
Disconnect any other USB audio devices from PC before performing the following procedure.
Installing [USB Mass Storage Class driver] (Windows® 98/98SE only)
1 Use the USB cable to connect the camcorder to the PC. (墌 pg. 9)
2 Select [Start] – [Settings] – [Control Panel]. Double click the [System] icon.
3 Select the [Device Manager] tab.
4 Delete [GR-DVP9*] in [Other devices].
* The model name depends on the connected camcorder.
5 Disconnect the USB cable from the camcorder. Restart the PC.
—8—
_001EN_SHEET_M3D7S-Sheet_p8-16.fm
CONTINUED ON NEXT PAGE
Page 8
Master Page: Right
_001EN_SHEET_M3D7S-Sheet_p8-16.fm Page 9 Friday, December 13, 2002 12:15 PM
6 Load the provided CD-ROM in the PC. Install [USB Mass Storage Class driver]. (墌 pg. 5)
7 Use the USB cable to connect the camcorder to the PC.
Device driver is installed.
8 Confirm the [Removable Disk] icon is displayed in [My Computer].
Installing [USB Video Streaming driver]
1 Use the USB cable to connect the camcorder to the PC. (墌 pg. 9)
2 Select [Start] – [Settings] – [Control Panel]. Double click the [System] icon.
3 Windows® 98/98SE/Me: Select the [Device Manager] tab.
4
Windows® 2000/XP: Select the [Hardware] tab and click [Device Manager].
Delete [GR-DVP9*] in [Other devices].
* The model name depends on the connected camcorder.
5 Disconnect the USB cable from the camcorder. Restart the PC.
6 Load the provided CD-ROM in the PC. Install [USB Video Streaming driver]. (墌 pg. 5)
● Windows® XP: Refer to “Installing USB Video Streaming driver for Windows® XP users” (墌 pg. 8) for
installation.
7 Use the USB cable to connect the camcorder to the PC.
Device driver is installed.
● Windows® 2000: When a warning message dialog box on digital signature appears, click [OK] to
continue installation.
8 Confirm the following devices are displayed in [Device Manager] by performing steps 2 – 3.
● [JVC PIX-MCV Video Capture] in [Imaging Devices]
● [JVC PIX-MCV Audio Capture] in [Sound, video and game controllers]
● [JVC Composite PIX-MCV Device] and [JVC Communication PIX-MCV Video Driver] in [Universal
Serial Bus Controllers]
Connections (Windows®)
Connecting the USB cable
Connect the USB cable to copy still image and video clip files in a memory card to the PC or to use
ImageMixer in capturing video.
PC
To USB connector
To USB connector
Camcorder
USB cable
1 To assure safety, make sure all units are turned off before making any connections.
2 Use the USB cable to connect the camcorder to the PC.
● We recommend that you use the AC Adapter.
—9—
_001EN_SHEET_M3D7S-Sheet_p8-16.fm
CONTINUED ON NEXT PAGE
Page 9
Master Page: Right
_001EN_SHEET_M3D7S-Sheet_p8-16.fm Page 10 Wednesday, December 4, 2002 6:47 PM
NOTES:
● When the USB cable is connected, turning on or off the camcorder or switching the VIDEO/MEMORY
(DSC) mode on the camcorder causes malfunctions of the PC.
● If you connect the camcorder to the PC through a USB hub, compatibility issues between the hub and the
PC may result in instability in the operation of the PC. If this happens, connect the camcorder directly to the
PC, not through the hub.
● Do not use an extension USB cable.
● You can also use a DV cable instead of a USB cable to capture video from a tape when using ImageMixer.
For more details, refer to the online help. (墌 “For more detailed information” in the ImageMixer instruction
manual on the CD-ROM)
Viewing the Contents of a Memory Card (Windows®)
1 Install [USB Mass Storage Class driver]. (墌 pg. 5)
● Windows® Me/2000/XP: There is no need to install this driver. Simply connect the camcorder to the PC
with a USB cable, and you can read and write memory cards in the camcorder.
2 Connect the camcorder to the PC with a USB cable. (墌 pg. 9)
3 Make sure that there is a memory card in the camcorder.
4 Set the camcorder to the memory card playback mode.
● Refer to the camcorder’s instruction manual for details.
[USB MODE] appears on the camcorder’s LCD monitor.
5 Double-click the [My Computer] icon on the desktop.
The [Removable Disk] icon which represents the
memory card in the camcorder appears in the [My
Computer] window.
NOTE:
Windows® 98/98SE:
[Removable Disk] icon does not appear if USB Mass Storage Class driver is not installed properly. In this case,
refer to “Updating [Device Manager] (Windows®)” (墌 pg. 8).
6 Double-click the [Removable Disk] icon.
The following folders are automatically created in the memory card. Different file types are stored in
different folders.
Navigation data
Sound effects
DPOF Setting data
Still images
Video clips
Still images
(extension “.jpg”)
: Folders within the [DCIM] folder
Video clips
(extension “.asf”)
: Folders within the [DCVI] folder
● The [DCVI] folder is displayed only when the camcorder is equipped with
E-Mail Clip Recording function.
— 10 —
_001EN_SHEET_M3D7S-Sheet_p8-16.fm
CONTINUED ON NEXT PAGE
Page 10
Master Page: Right
_001EN_SHEET_M3D7S-Sheet_p8-16.fm Page 11 Wednesday, December 4, 2002 6:47 PM
Sound effects
(extension “.mp3”)
: [100JVCGR] folder within the [DCSD] folder
● The [DCSD] folder is displayed only when the camcorder is equipped with
Digital Sound Effects function.
DPOF setting data
: Folders within the [MISC] folder
Navigation data
: Folders within the [NAVI] folder
● The [NAVI] folder is displayed only when the camcorder is equipped with
NAVIGATION function.
NOTES:
● Saving the wrong kinds of files in a memory card or deleting files or folders from a memory card can cause
problems with the operation of the camcorder. When it is necessary to delete a file from a memory card,
delete it through the camcorder.
● Never disconnect the USB cable while the message [ACCESSING FILES] is displayed on the camcorder’s
LCD monitor.
● If you are using a brand new memory card, you need to initialize the memory card with the camcorder first.
You may not be able to copy files from the memory card to the PC without doing so.
For owners of camcorders equipped with Digital Sound Effect function;
The CD-ROM contains digital sound files (data saved on the provided memory card at the factory). When
the memory card has been formatted, follow the step below to save the files on the memory card.
● Copy the “DCSD” folder on the CD-ROM into the root directory (volume) of the memory card.
Copying Files to the PC (Windows®)
Still image and video clip files that are stored in a memory card can be copied to the PC and played back on
the PC.
1 Double-click the [My Computer] icon on the desktop.
If the camcorder is connected to the PC correctly, the
[Removable Disk] icon appears.
2 Double-click the [Removable Disk] icon.
The folders in the memory card appear.
3 Double-click the destination folder.
4 Select the folder to be copied, and then drag and
drop that folder in the destination folder.
● To copy still images: Copy the folder within the [DCIM]
folder.
● To copy video clips: Copy the folder within the [DCVI]
folder.
The message [ACCESSING FILES] appears on the LCD
monitor of the camcorder, and the folder is copied from
the memory card to the PC.
NOTE:
Never disconnect the USB cable while the message
[ACCESSING FILES] is displayed on the camcorder’s LCD
monitor.
— 11 —
_001EN_SHEET_M3D7S-Sheet_p8-16.fm
Page 11
Master Page: Right
_001EN_SHEET_M3D7S-Sheet_p8-16.fm Page 12 Wednesday, December 4, 2002 6:47 PM
Playing Back Files on the PC (Windows®)
Still images
Use an application that can handle the JPEG file format. To view a still image, double-click the still image file
(extension “.jpg”).
Video clips (Only for the camcorder equipped with E-Mail Clip Recording function)
Use the Windows Media™ Player (version 6.4 or later). You can download the Windows Media™ Player from
the Microsoft web site at:
http://www.microsoft.com/
If you cannot play back a video clip file (extension “.asf”) that you have opened with the Windows Media™
Player, connect to the Internet and then try opening the file. The software that is needed in order to play back
the file will be downloaded automatically, and then the file will be played back.
If the video clip plays but without the audio, install the G.726 decoder from the CD-ROM.
Disconnecting the USB Cable (Windows®)
Before loading or unloading memory cards or turning off the PC, first disconnect the USB cable and turn off
the camcorder.
When using Windows® 98/98SE
1 Confirm that the message [ACCESSING FILES] is not currently displayed on the LCD monitor
of the camcorder.
● If the message [ACCESSING FILES] is currently displayed, wait until it disappears before proceeding.
2 Double-click the [My Computer] icon on the desktop.
If the camcorder is connected to the PC correctly, the [Removable Disk] icon appears.
3 Right-click the [Removable Disk] icon in the [My Computer] window.
A menu appears.
4 Click [Eject] in the menu.
The [Removable Disk] icon disappears.
● If the icon does not disappear, wait for a while, and then proceed to step 5.
5 Disconnect the USB cable.
● If any message appears, click [OK].
6 Set the Power Switch on the camcorder to “OFF”.
The camcorder turns off.
When using Windows® 2000/Me/XP
1 Confirm that the message [ACCESSING FILES] is not currently displayed on the LCD monitor
of the camcorder.
● If the message [ACCESSING FILES] is currently displayed, wait until it disappears before proceeding.
2 Double-click the [Unplug or Eject Hardware] icon in the status
bar.
The [Unplug or Eject Hardware] or [Safely Remove Hardware] dialog
box appears.
— 12 —
_001EN_SHEET_M3D7S-Sheet_p8-16.fm
CONTINUED ON NEXT PAGE
Page 12
Master Page: Right
_001EN_SHEET_M3D7S-Sheet_p8-16.fm Page 13 Wednesday, December 4, 2002 6:47 PM
3 Select [USB Mass Storage Device] or [USB Disk], and then click [Stop].
● Windows® 2000/XP
● Windows® Me
The [Stop a Hardware device] dialog box appears.
4 Click [OK].
● Windows® 2000/XP
● Windows® Me
The model name depends on the connected camcorder.
● If a message indicating that the device can be safely removed appears, click [OK].
5 Click [Close], and then disconnect the USB cable.
6 Set the Power Switch on the camcorder to “OFF”.
The camcorder turns off.
Connections (Macintosh)
Connect the USB cable to copy still image and video clip files in a memory card to the PC or to use
ImageMixer in capturing video.
PC
To USB
connector
Camcorder
To USB
connector
USB cable
— 13 —
_001EN_SHEET_M3D7S-Sheet_p8-16.fm
CONTINUED ON NEXT PAGE
Page 13
Master Page: Right
_001EN_SHEET_M3D7S-Sheet_p8-16.fm Page 14 Wednesday, December 4, 2002 6:47 PM
1 To assure safety, make sure all units are turned off before making any connections.
2 Use the USB cable to connect the camcorder to the PC.
● We recommend that you use the AC Adapter.
NOTES:
● When the USB cable is connected, turning on or off the camcorder or switching the VIDEO/MEMORY
(DSC) mode on the camcorder causes malfunctions of the PC.
● If you connect the camcorder to the PC through a USB hub, compatibility issues between the hub and the
PC may result in instability in the operation of the PC. If this happens, connect the camcorder directly to the
PC, not through the hub.
● Do not use an extension USB cable.
Software Installation (Macintosh)
Follow the procedure described below to install the software.
Quit any other software you are using.
1 Load the provided CD-ROM into the PC. Double click the CD-ROM icon.
2 Double-click the [ImageMixer] folder in the CD-ROM.
3 Double-click the [Install ImageMixer with VCD] icon.
The installer starts up. Follow the instructions which appear on the screen.
NOTE:
The ImageMixer with VCD instruction manual is included on the CD-ROM in PDF format. Double-click
the [Docs] folder. Open the “Start.pdf” file and click the button of the desired language. Note that Adobe®
Acrobat® Reader must be installed to read PDF files. The Installer of Adobe® Acrobat® Reader is included
within the [Reader] folder on the CD-ROM.
Viewing the Contents of a Memory Card (Macintosh)
1 Connect the camcorder to the PC with a USB cable. (墌 pg. 13)
2 Make sure that there is a memory card in the camcorder.
3 Set the camcorder to the memory card playback mode.
● Refer to the camcorder’s instruction manual for details.
[USB MODE] appears on the camcorder’s LCD monitor. The memory card icon appears on the desktop.
● The name of the memory card icon is “untitled”. We recommend that you name the icon to
tell it from the other removable disks or folders.
— 14 —
_001EN_SHEET_M3D7S-Sheet_p8-16.fm
CONTINUED ON NEXT PAGE
Page 14
Master Page: Right
_001EN_SHEET_M3D7S-Sheet_p8-16.fm Page 15 Wednesday, December 4, 2002 6:47 PM
4 Double-click the memory card icon on the desktop.
The folders in the memory card appear.
The following folders are automatically created in the memory card. Different file types are stored in
different folders.
Still images
Sound effects
DPOF Setting data
Video clips
Navigation data
Still images
(extension “.jpg”)
: Folders within the [DCIM] folder
Video clips
(extension “.asf”)
: Folders within the [DCVI] folder
● The [DCVI] folder is displayed only when the camcorder is equipped with
E-Mail Clip Recording function.
Sound effects
(extension “.mp3”)
: [100JVCGR] folder within the [DCSD] folder
● The [DCSD] folder is displayed only when the camcorder is equipped with
Digital Sound Effects function.
DPOF setting data
: Folders within the [MISC] folder
Navigation data
: Folders within the [NAVI] folder
● The [NAVI] folder is displayed only when the camcorder is equipped with
NAVIGATION function.
NOTES:
● Saving the wrong kinds of files in a memory card or deleting files or folders from a memory card can cause
problems with the operation of the camcorder. When it is necessary to delete a file from a memory card,
delete it through the camcorder.
● Never disconnect the USB cable while the message [ACCESSING FILES] is displayed on the camcorder’s
LCD monitor.
● If you are using a brand new memory card, you need to initialize the memory card with the camcorder first.
You may not be able to copy files from the memory card to the PC without doing so.
For owners of camcorders equipped with Digital Sound Effect function;
The CD-ROM contains digital sound files (data saved on the provided memory card at the factory). When
the memory card has been formatted, follow the step below to save the files on the memory card.
● Copy the “DCSD” folder on the CD-ROM into the root directory (volume) of the memory card.
— 15 —
_001EN_SHEET_M3D7S-Sheet_p8-16.fm
Page 15
Master Page: Right
_001EN_SHEET_M3D7S-Sheet_p8-16.fm Page 16 Wednesday, December 4, 2002 6:47 PM
Copying Files to the PC (Macintosh)
Still image and video clip files that are stored in a memory card can be copied to the PC and played back on
the PC.
1 Double-click the memory card icon on the desktop.
The folders in the memory card appear.
2 Double-click the destination folder.
3 Select the folder to be copied, and then drag and drop that
folder in the destination folder.
● To copy still images: Copy the folder within the [DCIM] folder.
● To copy video clips: Copy the folder within the [DCVI] folder.
The message [ACCESSING FILES] appears on the LCD monitor of the
camcorder, and the folder is copied from the memory card to the PC.
NOTE:
Never disconnect the USB cable while the message [ACCESSING FILES] is
displayed on the camcorder’s LCD monitor.
Playing Back Files on the PC (Macintosh)
Still images
Use an application that can handle the JPEG file format. To view a still image, either double-click the still
image file (extension “.jpg”), or drag and drop the file on the application icon.
Video clips (Only for the camcorder equipped with E-Mail Clip Recording function)
Use the Windows Media™ Player for Mac (version 6.4 or later). You can download the Windows Media™
Player for Mac from the Microsoft web site at:
http://www.microsoft.com/
Disconnecting the USB cable (Macintosh)
Before loading or unloading memory cards or turning off the PC, first disconnect the USB cable and turn off
the camcorder.
1 Drop the memory card icon on the desktop into the [Trash] icon.
● If the confirmation message appears, click [OK].
2 Confirm that the message [ACCESSING FILES] is not currently displayed on the LCD
monitor of the camcorder.
● If the message [ACCESSING FILES] is currently displayed, wait until it disappears before
proceeding.
3 Disconnect the USB cable.
4 Set the Power Switch on the camcorder to “OFF”.
The camcorder turns off.
— 16 —
_001EN_SHEET_M3D7S-Sheet_p8-16.fm
Page 16
Master Page: Cover1
_001EN_PDF_01M3D7S-Cover.fm Page 2 Wednesday, November 27, 2002 8:01 AM
Digital Photo Navigator
ImageMixer with VCD
ENGLISH
INSTRUCTIONS
LYT1116-001A
_001EN_PDF_01M3D7S-Cover.fm
Page 2
Master Page: Left-Heading0
2 EN
CONTENTS
INTRODUCTION .......................................................................................... 5
Reading this document .................................................................................................. 5
Meanings of symbols .................................................................................................... 6
Copyrights ................................................................................................................... 6
ENDLESS POSSIBILITIES ............................................................................... 7
Digital Photo Navigator ................................................................................................ 7
ImageMixer with VCD .................................................................................................. 8
Loading Still Images (Windows®) ........................... 9
ADDING STILL IMAGES TO AN ALBUM ....................................................... 10
EXITING DIGITAL PHOTO NAVIGATOR ....................................................... 12
Playing Back and Handling Images (Windows®) ...... 13
LOADING AN ALBUM ................................................................................ 14
DISPLAYING STILL IMAGES ....................................................................... 15
Displaying a selected still image .................................................................................. 15
Displaying a series of images ...................................................................................... 15
Enlarging and reducing images ..................................................................................... 16
ORGANIZING ALBUMS ............................................................................. 17
Selecting multiple still images ...................................................................................... 17
Deleting unnecessary still images ................................................................................ 18
Copying still images .................................................................................................... 18
SENDING IMAGES FROM AN ALBUM IN E-MAIL ......................................... 19
CREATING A WEB PAGE ............................................................................ 20
CHANGING THE IMAGE SIZE OR PICTURE QUALITY .................................... 22
Changing the image size .............................................................................................. 22
Changing the picture quality, etc. ................................................................................. 23
RETRIEVING STILL IMAGES FROM AN ALBUM ............................................ 24
CREATING A LIST OF STILL IMAGES ........................................................... 25
CREATING A SLIDE SHOW OR AN ANIMATION ........................................... 26
_001EN_PDF_02M3D7S-PhotoNaviTOC.fm
Page 2
Master Page: Right
EN
3
ImageMixer with VCD (Windows® and Macintosh) ... 27
IMAGEMIXER ........................................................................................... 28
Capabilities ................................................................................................................ 28
For more detailed information ..................................................................................... 29
PIXELA User Support Center ........................................................................................ 29
CAPTURING VIDEO ................................................................................... 30
Capturing video in real time ........................................................................................ 30
Capturing video from tape ........................................................................................... 32
MANAGING FILES ..................................................................................... 34
EDITING VIDEO ........................................................................................ 35
CREATING A VIDEO CD ............................................................................. 37
Appendix ............................................................ 39
CONDUCTING A VIDEO CONFERENCE OVER THE INTERNET .......................... 40
Using Windows® NetMeeting® (Windows® Only) ......................................................... 40
Using Windows® Messenger (Windows® XP Only) ....................................................... 42
LOADING FILES FROM A MEMORY CARD THROUGH AN ADAPTER .............. 44
ADDING SOUND EFFECTS .......................................................................... 45
TROUBLESHOOTING ................................................................................. 46
INDEX ...................................................................................................... 49
_001EN_PDF_02M3D7S-PhotoNaviTOC.fm
Page 3
Master Page: Left
4 EN
CAUTION:
● Operate this equipment according to the operating procedures described in this manual.
● Use only the provided CD-ROM. Never use any other CD-ROM to run this software.
● Do not attempt to modify this software.
● Changes or modifications not approved by JVC could void user’s authority to operate the equipment.
ATTENTION:
When connecting a USB cable or a DV cable to PC …
● Never switch the VIDEO/MEMORY (DSC) mode on the camcorder when the USB cable is connected. It
may cause the camcorder not to be recognized by the PC. If it occurs, confirm that the PC is not
accessing the camcorder, then disconnect the USB cable and connect it again.
● Never turn on or off the camcorder when the USB or DV cable is connected. It may cause malfunctions
of the PC.
How to handle a CD-ROM
● Take care not to soil or scratch the mirror surface (opposite to the printed surface). Do not write anything
or put a sticker on either the front or back surface. If the CD-ROM gets dirty, gently wipe it with a soft
cloth outward from the center hole using a circular motion.
● Do not use conventional disc cleaners or cleaning spray.
● Do not bend the CD-ROM or touch its mirror surface.
● Do not store your CD-ROM in a dusty, hot or humid environment. Keep it away from direct sunlight.
● You can find the latest information (in English) on the provided software program at our world wide web
server at http://www.jvc-victor.co.jp/english/index-e.html
● Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
● Macintosh is a registered trademark of Apple Computer, Inc.
● Other product and company names included in this instruction manual are trademarks and/or registered
trademarks of their respective holders.
_001EN_PDF_02M3D7S-PhotoNaviTOC.fm
Page 4
Master Page: Right-Heading0
INTRODUCTION
EN
5
Reading this document
This document consists of the following three sections and an Appendix.
Before use, please read the Software Installation and USB Connection Guide for preparation.
䡲 Loading Still Images (Windows®)
This section explains how to load still images into the album of the Digital Photo Navigator software.
䡲 Playing Back and Handling Images (Windows®)
This section explains how to handle still images using the Digital Photo Navigator software. You can send still
images by e-mail and store an album as a web page.
䡲 ImageMixer with VCD (Windows® and Macintosh)
This section introduces the ImageMixer software. In addition to capturing still images and creating albums,
ImageMixer is used for a variety of other functions, including color and brightness adjustment, and capturing
videos through a USB cable or a DV cable. ImageMixer is also used to edit your captured video and then
create a Video CD.* For details, refer to the ImageMixer online help.
* To create a Video CD, a CD-R drive is necessary. If you are using a Windows® PC, refer to the following web
site for a drive that is compatible with Windows®:
http://www.imagemixer.com
If you are using a Macintosh PC, the application Toast™ by Roxio, Inc. is also necessary.
䡲 Appendix
This appendix explains how to use a camcorder to hold a video conference over the Internet and how to load
images into the PC that does not have a USB connector. This appendix also contains troubleshooting and
index.
_001EN_PDF_03M3D7S-PhotoNavi.fm
Page 5
Master Page: Left
6 EN
INTRODUCTION (cont.)
Meanings of symbols
The following symbols are used in this document.
NOTE:
Indicates problems that could occur while using these softwares, phenomena that may appear to be a
problem, limitations on the use of these softwares, or other information that is useful to know.
墌
Indicates pages where related information can be found.
CONTINUED ON NEXT PAGE
Indicates that the explanation continues on the next page.
Copyrights
Under copyright law, any material that you may edit with this software cannot be used for any purpose other
than your own personal enjoyment without the permission of the copyright holder. Note that this restriction
applies when dubbing tracks from a CD as background music for your own movies.
_001EN_PDF_03M3D7S-PhotoNavi.fm
Page 6
Master Page: Right-Heading0
ENDLESS POSSIBILITIES
EN
7
Digital Photo Navigator
Send your favorite videos and pictures by e-mail
Everyone has video cassettes and memory cards containing videos and pictures that they never get to show to
anyone.
No matter how wonderful, the only people that got to see them were families and guests, because there was
no convenient way to show them except in your own home on the TV. Friends and relatives who live far away
had no way of viewing them. And you don’t want to throw those video cassettes and memory cards away
because they hold treasured memories.
Now you can solve all of these problems with a PC. By using a USB cable to connect a camcorder to a PC,
you can copy video clips from the camcorder to the PC. You can then send the files to anyone as an e-mail
attachment.
Can I do this with my PC?
Yes, as long as your PC has a USB connector.
Aren’t most video data files too large to send easily as e-mail attachments?
In the case of video, using the camcorder function to copy the video to a memory card will result in a smaller
file. In the case of still images, you can use this software to reduce the file sizes.
Create a virtual album
If you have a lot of image files with similar names, it can be hard to remember which file contains which
image.
You can use this software to display these images on your PC just as if you had pasted them in a photo album.
Because you can scan through these images just as if you were flipping through a photo album, you can
quickly find a specific image that you want to send through e-mail, for example.
Can I distribute copies of albums?
You can save albums in web page format. When the album is saved in this format, anyone with a browser can
view the album on any type of PC. Because the album is already in web page format, you can also exhibit
your photos on the Internet.
Under copyright law, it is illegal to distribute copyrighted images without the permission of the copyright
holder. Make sure that you have permission to distribute such images before actually doing so.
_001EN_PDF_03M3D7S-PhotoNavi.fm
Page 7
Master Page: Left
_001EN_PDF_03M3D7S-PhotoNavi.fm Page 8 Friday, November 29, 2002 10:02 AM
8 EN
ENDLESS POSSIBILITIES (cont.)
ImageMixer with VCD
Edit your own movies
Edit your own original movies by processing and re-arranging video clips and still images that you have
loaded into your PC. Now you can be the director! Just shoot video with your camcorder and then edit it on
your PC.
Once you have finished your movie, you can play back it on your PC, send it through e-mail, or even show it
on the Internet.
Create a Video CD
After you load and edit video clips on your PC, you are ready to create a Video CD* (墌 pg. 37). Since up to
64 minutes of video can be recorded to a 650MB CD, you can easily use a Video CD to send files too large
for e-mail attachment.
Video CDs can also be played back on most DVD players, so they are useful when you want to send video to
someone who does not own a PC.
* To create a Video CD, a CD-R drive is necessary. If you are using a Windows® PC, refer to the following web
site for a drive that is compatible with Windows®:
http://www.imagemixer.com
If you are using a Macintosh PC, the application Toast™ by Roxio, Inc. is also necessary.
Add a camera to your PC
You can transform your camcorder into a peripheral for your PC.
For example, when you are shooting a video, you can record on your PC instead of on a cassette. You can
also use Windows® NetMeeting, Windows® Messenger (Windows® XP only) (or similar software) in
combination with this software to hold a video conference over the Internet. (In order to conduct a video
conference over the Internet with Windows® NetMeeting or Windows® Messenger, you must register with
MSN Messenger and Microsoft HotMail.)
_001EN_PDF_03M3D7S-PhotoNavi.fm
Page 8
Master Page: Right-SecCover
EN
9
Loading Still Images (Windows®)
The Digital Photo Navigator software allows you to store and view still
images in a photo album format.
The icons on the Digital Photo Navigator window have the same functions
as the menus. In this section, almost all the procedures are explained using
the icons.
Read this section if you are using a Windows® operating system.
Menus
Icons
_001EN_PDF_03M3D7S-PhotoNavi.fm
Page 9
Master Page: Left-Heading0
10 EN
ADDING STILL IMAGES TO AN ALBUM
You can use Digital Photo Navigator to create an album that contains a collection of still images.
1 Select [Start] – [Programs] – [Digital Photo
Navigator] – [Digital Photo Navigator 1.0].
Digital Photo Navigator starts.
● Close any other programs running on the PC.
● Disable any programs that run in the background, such
as screen savers, e-mail applications, virus checkers,
schedulers, etc.
● Turn off file and printer sharing.
2 Click [Import].
3 Click [Image].
The [Open] dialog box appears.
4 Open the folder that contains the desired still images.
● Select the folder of the still images copied to the PC and
click [Open].
● When loading images from a memory card, select the
folder in the [DCIM] folder within [Removable Disk] and
click [Open].
The still image files appear in the window.
5 Select the desired still image files and click [Open].
The still images are added to the right-hand side of
the Digital Photo Navigator window.
● You may select more than one file.
● You can also add files by dragging and dropping them in
the Digital Photo Navigator window.
6 Add additional still images as desired by repeating
steps 3 – 5.
NOTES:
● When loading images from a memory card, never disconnect
the USB cable while the message [ACCESSING FILES] is
displayed in the camcorder’s LCD monitor.
● Digital Photo Navigator can only load still images. Digital Photo Navigator cannot load video clips and
sound effects.
CONTINUED ON NEXT PAGE
_001EN_PDF_03M3D7S-PhotoNavi.fm
Page 10
Master Page: Right
ADDING STILL IMAGES TO AN ALBUM (cont.)
EN
11
7 Click [Export].
8 Click [Album].
The [Save As] dialog box appears.
9 Specify the location where you want to save the
album, input the file name of the album, and then
click [Save].
The album is saved.
● If you save an album for the first time after the software
installation, a message appears and asks if you want to
register the association of the file extension name “jia”.
Then, click [Yes].
● To exit Digital Photo Navigator, refer to “Exiting Digital
Photo Navigator” (墌 pg. 12).
_001EN_PDF_03M3D7S-PhotoNavi.fm
Page 11
Master Page: Left-Heading0
12 EN
EXITING DIGITAL PHOTO NAVIGATOR
1 Click the [File] menu and then click [Exit].
● If you have already saved an album, a confirmation
message appears. Then, go to step 2.
● If you have not saved an album after loading still images, a
confirmation message appears.
To save an album, click [Yes]. The [Save as] dialog box
appears. Specify the location where you want to save the
album, input the file name of the album, and then click
[Save]. A confirmation message appears. Then, go to step 2.
To exit Digital Photo Navigator without saving an album,
click [No]. A confirmation message appears. Then, go to
step 2.
2 Click [Yes].
Digital Photo Navigator closes.
_001EN_PDF_03M3D7S-PhotoNavi.fm
Page 12
Master Page: Right-SecCover
EN
13
Playing Back and Handling Images (Windows®)
This section explains how to handle still images using Digital Photo
Navigator.
You can send still image files as an e-mail attachment and store an album
as a web page. Be sure to read “Loading Still Images (Windows®)” before
reading this section.
The icons on the Digital Photo Navigator window have the same functions
as the menus. In this section, almost all the procedures are explained using
the icons.
Read this section if you are using a Windows® operating system.
Menus
Icons
_001EN_PDF_03M3D7S-PhotoNavi.fm
Page 13
Master Page: Left-Heading0
14 EN
LOADING AN ALBUM
1 Start Digital Photo Navigator.
2 Click [Import].
3 Click [Album].
The [Open] dialog box appears.
4 Open the folder where the album was saved.
5 Click the desired album file, and then click [Open].
The contents of the album are displayed in the right-hand
side of the Digital Photo Navigator window.
6 Click [Export].
NOTES:
● You can also open the album file by dragging and dropping it in the Digital Photo Navigator window.
● If an album is currently open, a confirmation message
appears.
• If you want to open the newly selected album instead of
the one already opened, click [Yes]. If you have not saved
the album already opened, a confirmation message
appears. If you want to save the album, click [Yes]. If you
do not want to save the album, click [No].
• If you want to add still images from the newly selected album to the album already opened, click [No].
_001EN_PDF_03M3D7S-PhotoNavi.fm
Page 14
Master Page: Right-Heading0
DISPLAYING STILL IMAGES
EN
15
Displaying a selected still image
You can select for display any of the still images that are displayed in the right-hand side of the Digital Photo
Navigator window.
1 Double-click the still image to be displayed.
The [Image Viewer] window appears, and the selected image is displayed.
Displaying a series of images
To display a series of images in “slide show” fashion, click the
button in the [Image Viewer] window. You
can also move through the images manually in either direction by clicking the
and
buttons.
Stop slide show Start slide show
First image
Previous image
Last image
Next image
To adjust the speed of the slide show, right-click the [Image Viewer] window and then, in the menu that
appears, click [Slide show] – [Setting Interval Time]. Set the length of the interval (in seconds), and then click
[OK].
NOTE:
The interval for a slide show is a little longer than the setting because of display processing time.
_001EN_PDF_03M3D7S-PhotoNavi.fm
Page 15
Master Page: Left
16 EN
DISPLAYING STILL IMAGES (cont.)
Enlarging and reducing images
The following procedure describes how to change the display size of a still image.
1 Drag the corner of the [Image Viewer] window to change the size of the window to the desired
display size.
2 Right-click the [Image Viewer] window and then, in the
menu that appears, click [Zoom] – [Auto].
Display magnification
The size of the still image is automatically enlarged or reduced to
fit the window, and the display magnification (enlargement/
reduction percentage) indicated in the title bar of the window
changes accordingly.
Other enlargement/reduction functions
In addition to adjusting the size of the image to the size of the
window, the display size of a still image can also be changed by the
methods described below. Each of these functions can be selected by
right-clicking the [Image Viewer] window.
● [Zoom] – [Real Size]: Displays the image in its original size
(display magnification of 100%).
● [Zoom] – [Zoom In]: Displays the image at twice its current display magnification (up to 400%).
● [Zoom] – [Zoom Out]: Displays the image at half its current display magnification (up to 20%).
_001EN_PDF_03M3D7S-PhotoNavi.fm
Page 16
Master Page: Right-Heading0
ORGANIZING ALBUMS
EN
17
Whenever necessary, you can delete or copy still images that you have added to an album. The procedure
described below only affects the still image in the album. It does not affect the original file of the still image
that was added to the album.
Selecting multiple still images
To delete or copy multiple still Images at once, select them in advance. You can also select all still images in
the album.
Selecting still images continuously
Click still images while holding down the Shift key.
Click
Shift + Click
If you click one still image while holding down the Shift key, the images of smaller numbers are selected as
well.
Selecting still images one by one
Click still images while holding down the Ctrl key.
Ctrl + Click
Selecting all of the still images
Click [Select All] in the [Edit] menu.
_001EN_PDF_03M3D7S-PhotoNavi.fm
Page 17
Master Page: Left
18 EN
ORGANIZING ALBUMS (cont.)
Deleting unnecessary still images
1 Click the still image that you want to delete, and then
click [Delete] in the [Edit] menu.
A confirmation message appears.
2 Click [Yes].
The selected still images are deleted.
Copying still images
1 Click the still image that you want to copy, and then
click [Copy] in the [Edit] menu.
2 Click the image that is located right after the
insertion point.
● To add the images at the end of the album, click the
blank space in the right-hand side of the window.
3 Click [Paste] in the [Edit] menu.
The copied still images are inserted right before the
selected image.
NOTE:
You can delete, copy or paste an image also by right-clicking
it.
Insertion point
_001EN_PDF_03M3D7S-PhotoNavi.fm
Page 18
Master Page: Right-Heading0
SENDING IMAGES FROM AN ALBUM IN E-MAIL
EN
19
Still images in an album can be sent as an e-mail attachment.
Preparation: Before using the [E-Mail] function
If you use the Internet Explorer, be sure to use the version 5.5 or later.
When installing the Internet Explorer, select a typical set of components.
1 Click the still image that you want to send, and
then click [E-Mail].
The new message window in your e-mail program
appears, and the still image file is registered as an
attachment.
NOTES:
● Depending on an e-mail software, a new message window
may not open when the [E-Mail] button is clicked.
● Depending on an e-mail software, settings such as “Set as
MAPI client” or “Used by MAPI application” are necessary.
● The maximum number of messages that can be created at
once is three.
_001EN_PDF_03M3D7S-PhotoNavi.fm
Page 19
Master Page: Left-Heading0
20 EN
CREATING A WEB PAGE
You can save the contents of an album in HTML format. This is useful in the following instances:
When creating a web page:
When distributing an album:
You can create a web page that features a collection of photos.
You can create an album in a format that can be displayed by a web
browser. This is useful if you want to distribute the album on CD-R, etc.
1 Select the still images that you want to save in
HTML format.
● To select more than one still image, hold down the Shift
key or the Ctrl key while clicking the images.
● To select all of the still images, click [Select All] in the
[Edit] menu.
2 Click [Web Page].
The [Web Page] dialog box appears.
3 Set the following items when necessary.
● [Title]: This will be the title of the web page.
● [Font Color]: This specifies the color of the title text.
● [Back Color]: This specifies the background color of the
web page. (Specify a color other than the font color.)
● [Limit horizontal size of the images]: This allows you to
specify the maximum width of the image when
displayed by a web browser. (Set the number of pixels
much smaller than the width of the PC’s display.)
CONTINUED ON NEXT PAGE
_001EN_PDF_03M3D7S-PhotoNavi.fm
Page 20
Master Page: Right
CREATING A WEB PAGE (cont.)
EN
21
4 Click [OK], specify the save location, and then
click [Save].
The HTML file is saved, and a folder with the same
name is saved at the same time. A confirmation
message appears next, asking whether to display the
web page.
5 Click [Yes].
The web browser opens, and the HTML file that was
created is displayed.
● Click on an image on the web page to enlarge it.
What Next?
You can also view an HTML file through the web browser by double-clicking the HTML file. You can upload
the HTML file to your home page, or save it on a CD-R or some other media and distribute it.
Always handle HTML files and folders as a set. Without its folder, an HTML file cannot be viewed by a web
browser.
NOTES:
● For more details on how to create a home page, consult your Internet service provider’s web site or one of
the many reference books available.
● Use third-party home page creation software or similar software to edit HTML files.
_001EN_PDF_03M3D7S-PhotoNavi.fm
Page 21
Master Page: Left-Heading0
22 EN
CHANGING THE IMAGE SIZE OR PICTURE QUALITY
Changing the image size
This procedure describes how to change the size of an image that has been loaded into Digital Photo
Navigator. This procedure is used to reduce the size of an image that is being attached to an e-mail or saved
in an album.
1 Select the still image to be changed.
● To select more than one still image, hold down the Shift
key or the Ctrl key while clicking the images.
● To select all of the still images, click [Select All] in the
[Edit] menu.
2 Click [Change Format].
The [Image Format] dialog box appears.
3 Select one of the following items:
● [Expansion/Reduction]: Set any desired image size in
the [Width] and [Height] fields. If the [Keep aspect
ratio] check box is not selected (off), both [Width] and
[Height] fields can be changed.
● [Generic Size]: Select the size from a list of generic
sizes.
● [PDA Size]: This is an image size (160 x 160) that can
be displayed on most PDAs.
4 Click [OK].
● If you select more than one still image in step 1, a
confirmation message appears.
• If you want to apply the same format to all images, click [Yes].
• If you do not want to apply the same format, click [No]. The first image is saved. Then, select the image
size for each image.
The image size is changed to the selected size. If the vertical-to-horizontal ratio was changed, the blank
spaces are shown as black.
_001EN_PDF_03M3D7S-PhotoNavi.fm
Page 22
Master Page: Right
CHANGING THE IMAGE SIZE OR PICTURE QUALITY (cont.)
EN
23
Changing the picture quality, etc.
In addition to changing the size of an image, it is also possible to rotate images, change or correct the quality
of an image, and change the file format of an image. The role of each setting is described in more detail
below.
[90 degrees Rotation]
If you hold the camcorder sideways when recording an
image, you can create an image that is taller than it is
wide. Because this still image will be displayed sideways,
use this function to rotate the image 90 degrees to the
portrait orientation.
[None]: No correction
[Clockwise]: Rotates the image 90 degrees clockwise.
[Counterclockwise]: Rotates the image 90 degrees
counterclockwise.
[Image Correction (DV)]
This setting is not available.
[Format]
You can select the file format of an image.
[JPEG]: This is the format that is typically used on the Internet. This format has a smaller file size.
[BITMAP]: This is the standard Windows® image format (BMP). Many applications can use this format.
[JPEG Quality]
This setting is available when JPEG was selected in the [Format] field. Moving the slider to the left makes the
file smaller. Moving the slider to the right results in less deterioration in the image quality. The initial setting is
75.
NOTES:
● When [JPEG] is selected in the [Format] field, the quality of the image deteriorates slightly each time that
[OK] is clicked for the [Image Format] dialog box. To restore the original image quality, reload the original
still image file.
● To confirm the file size, right-click the still image and then select [Properties].
_001EN_PDF_03M3D7S-PhotoNavi.fm
Page 23
Master Page: Left-Heading0
24 EN
RETRIEVING STILL IMAGES FROM AN ALBUM
You can retrieve still images from an album and save them as a file.
1 Select the still image to be retrieved.
● To select more than one still image, hold down the Shift
key or the Ctrl key while clicking the images.
● To select all of the still images, click [Select All] in the
[Edit] menu.
2 Click [Image].
The [Image Format] dialog box appears.
3 Change the image format as desired. (墌 pg. 22, 23)
Then, click [OK].
● At this point, you can change the image size and picture
quality as desired. (墌 pg. 22)
The [Save As] dialog box appears.
4 Specify the location where you want to save the file,
input the file name, and then click [Save].
The image file is saved.
● If you select more than one still image in step 1, a
confirmation message appears.
• If you want to save all images with the same image
format and their default name, click [Yes]. The [Auto
Save Result] dialog box appears. Then, click [OK].
• If you want to set the image format and input file name
for each image, click [No]. The first image is saved.
The [Image Format] dialog box appears for the second
image. Repeat steps 3 and 4 as many times as
necessary.
_001EN_PDF_03M3D7S-PhotoNavi.fm
Page 24
Master Page: Right-Heading0
CREATING A LIST OF STILL IMAGES
EN
25
You can arrange multiple still images together and save them in a single still image file.
1 Holding down the Shift key or the Ctrl key, select
the still images that are to be added to the list.
2 Click [Multi Image].
The [Multi Image] dialog box appears.
3 Select the number of partitions.
● Either 4, 9, or 16 partitions may be selected.
4 Click [Back Color], select the color for the overall
background, and then click [OK].
5 Change the positions of the still images as desired.
● Deleting an image: Right-click the still image and then
select [Delete].
● Adding an image: Drag an image from the right-hand
side of the Digital Photo Navigator window to the
[Multi Image] dialog box.
6 Click [Save].
The [Image Format] dialog box appears.
7 Change the image format as desired. (墌 pg. 22, 23)
Then, click [OK].
● At this point, you can change the image size and picture
quality as desired. (墌 pg. 22)
The [Save As] dialog box appears.
8 Specify the location where you want to save the
file, input the file name, and then click [Save].
The still image list file is saved.
_001EN_PDF_03M3D7S-PhotoNavi.fm
Page 25
Master Page: Left-Heading0
26 EN
CREATING A SLIDE SHOW OR AN ANIMATION
You can create a slide show or an animation in which a series of still images are displayed, and then save
those images as a movie file (extension “.avi”).
[Slide Show]: Still images are displayed for several seconds each, one at a time.
[Animation]: Several still images are displayed per second. We recommend that you select a series of still
images that create the appearance of continuous movement.
1 Holding down the Shift key or the Ctrl key, select
several still images.
2 Click [Movie].
The [Movie Settings] dialog box appears.
3 Select either [Slide Show] or [Animation], which
ever is desired.
● For a slide show, set the length of the interval (in
seconds).
● For an animation, set the number of displayed frames
(images) per second.
4 Set the following items when necessary.
● [Image Size]: Select the size of the movie file.
● [Compressor]: Select the type of compressor.
● [Back Color]: This item is used if the aspect ratio of the
images is not 4:3.
5 Click [OK].
The [Save As] dialog box appears.
6 Specify the location where you want to save the file, input the file name, and then click [Save].
● The file name can be changed.
The movie file is saved, and a confirmation message that asks if you want to play the movie now appears.
7 Click [Yes].
The movie file is played back.
NOTES:
● If you change the [Compressor] item, make sure that the
playback system supports that type of compressor.
● Depending on the selected type for [Compressor], a movie
file cannot be created.
● In some cases, the settings in the [Video Compression] dialog box are invalid.
_001EN_PDF_03M3D7S-PhotoNavi.fm
Page 26
Master Page: Right-SecCover
EN
27
ImageMixer with VCD (Windows® and Macintosh)
In addition to capturing still images and creating albums, ImageMixer is
used for a variety of other functions, including color and brightness
adjustment, and capturing video through a USB cable or a DV cable.
Read this section whether you are using a Windows® or a Macintosh
operating system.
Explanations of mode buttons are
displayed here.
_001EN_PDF_04M3D7S-ImageMixer.fm
Page 27
Master Page: Left-Heading0
28 EN
IMAGEMIXER
Capabilities
The ImageMixer software possesses a variety of functions. Its primary applications are described below.
Editing your own original movies
ImageMixer allows you to capture video from a camcorder, rearrange scenes, add special effects when
changing scenes, insert still images, and otherwise freely edit your own movies. ImageMixer also allows you
to add audio and background music.
The edited movie is stored in MPEG1 format, which provides a comparatively smaller file size. This makes it
more convenient to distribute it to your friends, for example, expanding the range of possibilities for which
you can use your camcorder.
Capturing video from tape
Connect the camcorder to the PC with a USB cable. ImageMixer can then convert the video on tape to
MPEG1 format and store it in the PC.
NOTE:
This feature is not available when …
… the camcorder and a Windows® 98 PC are connected with a USB cable
… the camcorder and a Windows® 98/98SE or Macintosh PC are connected with a DV cable
Capturing video in real time
Connect the camcorder to the PC with a USB cable. ImageMixer can then record on the hard disk in the PC,
instead of on the tape.
NOTE:
This feature is not available when …
… the camcorder and a Windows® 98 PC are connected with a USB cable
… the camcorder and a Windows® 98/98SE or Macintosh PC are connected with a DV cable
Loading still images from a memory card
Connect the camcorder to the PC with a USB cable. ImageMixer can then load still images from a memory
card.
Capturing audio from a microphone or CD
ImageMixer can record audio from the PC’s microphone. Because the recording can be made while playing
the video back at the same time, it is easy to add audio that is in sync with previously recorded video.
ImageMixer can also add music from a CD as background music for your movie.
Editing still images
ImageMixer can adjust the brightness and contrast of still images and extract only the necessary portions.
ImageMixer also has a variety of functions for correcting eye color tones that are too red.
In addition, ImageMixer allows you to freely lay out still images, pictures, text, and other elements to create
your own postcards, CD-R labels, etc.
_001EN_PDF_04M3D7S-ImageMixer.fm
Page 28
Master Page: Right
IMAGEMIXER (cont.)
EN
29
Managing files on hard disk
ImageMixer can manage elements that can be used in movie editing (video, still images, audio) as albums.
Aside from permitting checking of files in list format or through a slide show, ImageMixer can also perform
file operations such as search, move, duplicate, and delete. In addition to making movie editing easier, these
functions are also useful for classifying and managing images with a camcorder.
Create a Video CD
ImageMixer can edit your captured and edited video and then create a Video CD.
IMPORTANT:
Differences from Digital Photo Navigator
Unlike Digital Photo Navigator, ImageMixer only registers the location of an image file and its thumbnail
image in albums. When images are handled by ImageMixer, the original file is affected by the operation.
For example, if an image is deleted from an album, the original file is deleted. If a file is moved,
ImageMixer loses track of where the file resides. Therefore, file operations should be conducted carefully.
For more detailed information
This manual only provides an overview of ImageMixer. For more details on how to use its many functions,
refer to the online help.
To display online help for Windows®, click the [?] button located in the upper right corner of the ImageMixer
screen. Clicking this button launches the web browser and displays the online help.
To display online help for Macintosh, double-click the “manual.html” file in the [ImageMixer with VCD]
folder.
PIXELA User Support Center
For more details on how to use ImageMixer, refer to the following User Support Center.
North America (Los Angeles)
Telephone: +1-213-341-0163
Europe (U.K.)
Telephone: +44-1489-564-764
Asia (Philippines)
Telephone: +63-2-438-0090
_001EN_PDF_04M3D7S-ImageMixer.fm
Page 29
Master Page: Left-Heading0
30 EN
CAPTURING VIDEO
Capturing video in real time
When a camcorder is connected to the PC with a USB cable, the video from the camcorder can be recorded
on the PC’s hard drive instead of on tape or in a memory card (real-time capture).
1 Connect the camcorder to the PC with a USB cable.
● Refer to “Connections (Windows®)” (墌 pg. 9) or “Connections (Macintosh)” (墌 pg. 13) in the Software
Installation and USB Connection Guide.
2 Set the camcorder to the memory card recording mode.
The camcorder is now on.
“
” appears on the camcorder’s LCD monitor.
● If “
” does not appear, install [USB Video Streaming driver]. Refer to “Software Installation
(Windows®)” (墌 pg. 5) and “Software Installation (Macintosh)” (墌 pg. 14) in the Software Installation
and USB Connection Guide.
NOTE:
The procedure is different when reading or writing a memory card.
3 Select [Start] – [Programs] – [PIXELA] –
[ImageMixer] – [ImageMixer With VCD
Ver.1.1].
● For Macintosh, double-click the
[ImageMixer] icon on the PC.
ImageMixer starts up.
4 Click the Input button.
The input mode screen appears.
Input
CONTINUED ON NEXT PAGE
_001EN_PDF_04M3D7S-ImageMixer.fm
Page 30
Master Page: Right
CAPTURING VIDEO (cont.)
EN
31
5 Click the USB input (USB) button.
The USB input mode screen appears.
6 Click the Video button.
The amount of available storage space is
displayed in the information display panel.
7 Click the Capture button.
USB input (USB)
The capture operation begins.
8 Click the Capture button again.
Capture
Once conversion ends, the video file (MPEG1)
is registered in the album.
NOTE:
If the MPEG1 files cannot be converted to MPEG4
files with ImageMixer, install Windows Media™
Player (version 7 or later). Windows Media™
Player can be loaded from Microsoft’s web site:
http://www.microsoft.com/
Video
Information display panel
Capturing still images
1 Click the Still image button.
2 Click the Capture button.
The video image at the moment that the button
was clicked is captured, and the resulting still
image file (JPEG) is registered in the album.
NOTES:
● It is not possible to capture videos or still images
if the USB Mass Storage Class driver is not
installed properly. In this case, refer to “Updating
[Device Manager] (Windows®)” (墌 pg. 8) in the
Software Installation and USB Connection
Guide.
● On the information display panel or the file
information dialog, some information such as
file-created date may be incorrect.
Still image
Disconnecting the USB cable
1 Disconnect the USB cable.
2 Set the Power Switch on the camcorder to “OFF”.
Capture
Information display panel
The camcorder turns off.
_001EN_PDF_04M3D7S-ImageMixer.fm
Page 31
Master Page: Left
32 EN
CAPTURING VIDEO (cont.)
Capturing video from tape
When a camcorder is connected to the PC with a USB cable, video can be copied from the camcorder tape to
the PC.
1 Set the camcorder to the tape playback mode.
The camcorder is now on.
2 Select [Start] – [Programs] – [PIXELA] –
[ImageMixer] – [ImageMixer With VCD
Ver.1.1].
ImageMixer starts up.
● For Macintosh, double-click the
[ImageMixer] icon on the PC.
ImageMixer starts up.
3 Click the Input button.
The input mode screen appears.
Input
4 Click the USB input (USB) button.
The USB input mode screen appears. After a
while, a blue screen appears.
USB input (USB)
_001EN_PDF_04M3D7S-ImageMixer.fm
Page 32
Master Page: Right
CAPTURING VIDEO (cont.)
EN
33
Copying video
1 Click the Video button.
The amount of available storage space is
displayed in the information display panel.
2 Click the Play button.
The camcorder begins playing back the video,
and the same image appears on the PC screen.
3 Click the Capture button.
The capture operation begins.
4 Click the Capture button again.
Once conversion ends, the video file (MPEG1) is
registered in the album.
NOTE:
If the MPEG1 files cannot be converted to MPEG4
files with ImageMixer, install Windows Media™
Player (version 7 or later). Windows Media™ Player
can be loaded from Microsoft’s web site:
http://www.microsoft.com/
Play
Capture
Video
Information display panel
Disconnecting the USB cable
1 Disconnect the USB cable.
2 Set the Power Switch on the camcorder to “OFF”.
The camcorder turns off.
NOTES:
● If you are using a Windows® PC, you can use a DV cable instead of a USB cable to capture video. In this
case, click the Digital video camera input (1394) button in step 4 on page 32. For more details, refer to the
online help. (墌 pg. 29)
● To copy a video as a still image, click the Still image button in step 1 of “Copying video” and perform
steps 2 – 4.
● It is not possible to capture video keeping DV format. Use other DV capture application software available.
● If you capture video from a tape via an optional DV cable, noise may appear depending on the type or the
performance of the hardware. In this case, use the USB cable.
_001EN_PDF_04M3D7S-ImageMixer.fm
Page 33
Master Page: Left-Heading0
34 EN
MANAGING FILES
ImageMixer can group and search for files (still images, video, and audio) registered in an album, according
to their purpose. To playback a file, double-click on its thumbnail.
Menu
Select album
Image editing
Change display
Change
display
Thumbnail
Search
_001EN_PDF_04M3D7S-ImageMixer.fm
Page 34
Master Page: Right-Heading0
EDITING VIDEO
EN
35
ImageMixer can edit video files registered in an album. ImageMixer can also insert still images and add
audio.
Select video editing
Material selection
Create video
Edit
Preview
Thumbnail
Arrange
thumbnails
Apply scene
change effects
Arrange audio
Double-clicking on one of the (video or still image) thumbnails arranged at the bottom of the screen causes
the editing window to appear. The beginning/ending of videos can be deleted and the volume can be
adjusted. The display time for still images can be adjusted.
_001EN_PDF_04M3D7S-ImageMixer.fm
Page 35
Master Page: Left
36 EN
EDITING VIDEO (cont.)
Cropping editing
Sound editing
Cropping
OK
To check the results of editing, click the Preview button. Once editing is complete, click the Create video
button to save the final product.
_001EN_PDF_04M3D7S-ImageMixer.fm
Page 36
Master Page: Right-Heading0
CREATING A VIDEO CD
EN
37
If your computer is equipped with a CD-R drive, you can use ImageMixer to create a Video CD.
Video CD
Video CD
On the first screen of ImageMixer or ImageMixer screen, click the Video CD button. [IMx VCD] screen
appears.
Video CD
Click [Video CD]. The Menu/Layout screen appears.
CONTINUED ON NEXT PAGE
_001EN_PDF_04M3D7S-ImageMixer.fm
Page 37
Master Page: Left-Heading0
38 EN
CREATING A VIDEO CD (cont.)
Button settings
Preview/Create
Style settings
Title settings
Specify the menu
screen style
Enter the title
Move the Movie
button
(registered video
clips)
Enter the button
name
Specify background
and music
Register the video
clips
After registering the video clips and entering the title and button name, click the Preview/Create button. The
Preview/Create screen appears.
Set up
Preview
Create
Insert a blank CD-R disc in the CD-R drive and click the Create button to create a Video CD.
NOTES:
● If you are using a Windows® PC, refer to the following web site for a drive that is compatible with
Windows®:
http://www.imagemixer.com
● If you are using a Macintosh PC, the CD authoring application Toast™ by Roxio, Inc. and a compatible CDR drive is also necessary to create a Video CD. Follow the steps above to create a Video CD image file, and
then open it with ToastTM and create the Video CD.
● Some CD-R drives are incompatible. For details, please refer to the ImageMixer online help. (墌 pg. 29)
● It is only possible to play back the created Video CD with the player which conform with Video CD
standard Version 2.0.
● The image quality may be deteriorated when you create Video CD with video captured from the camcorder
via a USB cable.
_001EN_PDF_04M3D7S-ImageMixer.fm
Page 38
Master Page: Right-SecCover
EN
39
Appendix
This appendix explains how to use a camcorder to hold a video conference
over the Internet and how to load images into the PC that does not have a
USB connector. This appendix also contains troubleshooting and index.
_001EN_PDF_05M3D7S-Appndix.fm
Page 39
Master Page: Left-Heading0
40 EN
CONDUCTING A VIDEO CONFERENCE OVER THE INTERNET
Using Windows® NetMeeting® (Windows® Only)
You can use Windows® NetMeeting® to conduct video conferences over the Internet, using a camcorder.
Preparation
1 Confirm that Windows® NetMeeting® 3.0 or later and MSN Messenger Service is installed.
● You can download the latest version of Windows® NetMeeting® or MSN Messenger Service from
Microsoft’s web site:
http://www.microsoft.com/
2 Install [USB Video Streaming driver].
● Refer to “Software Installation (Windows®)” (墌 pg. 5) in the Software Installation and USB Connection
Guide.
● If the installation of [USB Video Streaming driver] has already been completed, go to step 3.
3 Connect the camcorder to the PC with a USB cable.
● Refer to “Connections (Windows®)” (墌 pg. 9) in the Software Installation and USB Connection Guide.
4 Set the camcorder to the memory card recording mode.
The camcorder is now on.
“
” appears on the camcorder’s LCD monitor.
● If “
” does not appear, install [USB Video Streaming driver]. Refer to “Software Installation
(Windows®)” (墌 pg. 5) in the Software Installation and USB Connection Guide.
NOTE:
The procedure is different when reading or writing a memory card.
5 Select [Start] – [Settings] – [Control Panel] and double click the [Multimedia] icon. Select the
[Audio] tab and click [JVC PIX-MCV Audio Capture] in the [Preferred device] box.
6 Start NetMeeting®, and set up the program as instructed on the screen.
● An environment that provides for connection to the Internet and an e-mail address are also required.
● Select [JVC PIX-MCV Audio Capture] as a recording device in the [Audio adjustment] wizard.
7 In the [Conference] menu, click [Directory].
The [Find Other Party] dialog box appears.
8 Register with HotMail as instructed on the screen.
9 Set up MSN Messenger as instructed on the screen.
● If setup was completed previously, the MSN Messenger Service logon window appears.
10 Exit NetMeeting® and MSN Messenger Service.
_001EN_PDF_05M3D7S-Appndix.fm
Page 40
Master Page: Right
CONDUCTING A VIDEO CONFERENCE OVER THE INTERNET (cont.)
EN
41
Videoconferencing
1 Connect to the internet.
2 Connect the camcorder to the PC with a USB cable.
● Refer to “Connections (Windows®)” (墌 pg. 9) in the Software Installation and USB Connection Guide.
3 Set the camcorder to the memory card recording mode.
The camcorder is now on.
“
” appears on the camcorder’s LCD monitor.
● If “
” does not appear, install [USB Video Streaming driver]. Refer to “Software Installation
(Windows®)” (墌 pg. 5) in the Software Installation and USB Connection Guide.
NOTE:
The procedure is different when reading or writing a memory card.
4 Start NetMeeting®, and click [Directory] in the [Conference] menu.
The MSN Messenger Service logon window appears.
5 Log on to the MSN Messenger Service as instructed on the screen.
6 In the list of [Current Friends Online], specify the party with whom you will videoconference.
You can now begin the videoconference if your friends respond. The same environment is necessary for
your friends.
For details, refer to the help for the MSN Messenger Service and NetMeeting®. Details on how to uses
NetMeeting® are expected to be available on the JVC web site.
JVC web site:
http://www.jvc-victor.co.jp/english/index-e.html
ATTENTION
Do not turn the Power switch during video conference.
NOTES:
● If you are using Windows® 98, you cannot use the microphone in the camcorder. Either connect a thirdparty microphone to the PC, or use the PC’s own microphone.
● If you are using a dial-up router or a broadband router, refer to the router’s instruction manual.
● If you are using a firewall or a router, it is not possible to connect to the internet properly.
● Consult your Internet service provider for details before using NetMeeting®.
● Depending on the condition of the line, the quality of images or sound during videoconferences may differ.
● You can also send the video of a tape which the camcorder is playing back. In this case, set the camcorder
to the playback mode in step 3.
_001EN_PDF_05M3D7S-Appndix.fm
Page 41
Master Page: Left
42 EN
CONDUCTING A VIDEO CONFERENCE OVER THE INTERNET (cont.)
Using Windows® Messenger (Windows® XP Only)
If you are using a Windows® XP, you can use Windows® Messenger to conduct video conferences over the
Internet, using a camcorder.
Preparation
1 Confirm that Windows® Messenger® 4.6 or later is installed.
● You can download the latest version of Windows® Messenger from Microsoft’s web site:
http://www.microsoft.com/
2 Connect to the Internet and set up Windows® Messenger.
● Start Windows® Messenger and register your e-mail address and other information. For details, refer to
the Windows® Messenger help.
3 Install [USB Video Streaming driver].
● Refer to “Software Installation (Windows®)” (墌 pg. 5) in the Software Installation and USB Connection
Guide.
● If the installation of [USB Video Streaming driver] has already been completed, go to step 4.
4 Connect the camcorder to the PC with a USB cable.
● Refer to “Connections (Windows®)” (墌 pg. 9) in the Software Installation and USB Connection Guide.
5 Set the camcorder to the memory card recording mode.
The camcorder is now on.
“
” appears on the camcorder’s LCD monitor.
● If “
” does not appear, install [USB Video Streaming driver]. Refer to “Software Installation
(Windows®)” (墌 pg. 5) in the Software Installation and USB Connection Guide.
NOTE:
The procedure is different when reading or writing a memory card.
6 In the main screen of Windows® Messenger, click [Tools] and then select [Audio and Video
Tuning Wizard…].
7 Select [JVC PIX-MCV Video Capture] and then click [Next].
● Make sure that the image from the camcorder is displayed.
8 Click [Next]. In the microphone setting, specify [JVC PIX-MCV Audio Capture]. In the speaker
setting, specify the sound board that you are using.
● If you specify [JVC PIX-MCV Audio Capture] for the microphone setting, you cannot select [Use
headphones].
9 Click [Next]. Check the speaker or headphone volume.
● Click [Test] and check for sound from your speakers or headphones.
10 Click [Next]. Check the microphone volume.
● The microphone volume is automatically adjusted. Speak into the camcorder microphone and check
the microphone volume level so that the green bar extends into the yellow range.
11 Click [Next] and exit the Wizard.
_001EN_PDF_05M3D7S-Appndix.fm
Page 42
Master Page: Right
CONDUCTING A VIDEO CONFERENCE OVER THE INTERNET (cont.)
EN
43
Videoconferencing
1 Connect to the internet.
2 Connect the camcorder to the PC with a USB cable.
● Refer to “Connections (Windows®)” (墌 pg. 9) in the Software Installation and USB Connection Guide.
3 Set the camcorder to the memory card recording mode.
The camcorder is now on.
“
” appears on the camcorder’s LCD monitor.
● If “
” does not appear, install [USB Video Streaming driver]. Refer to “Software Installation
(Windows®)” (墌 pg. 5) in the Software Installation and USB Connection Guide.
NOTE:
The procedure is different when reading or writing a memory card.
4 Log on to the Windows® Messenger.
● Register your friend’s e-mail address beforehand. For details, refer to the Windows® Messenger help.
5 In the Windows® Messenger screen, make sure that someone is online besides yourself.
● Another friend must be online for you to call.
6 Right-click the name of your friend.
7 Click [Start Video Chat].
The videoconference screen appears while you wait for a response from your friend. You can now begin
the videoconference if your friend clicks [Agree].
If the Image does not appear...
● Upgrade to Windows® Messenger 4.6 or later. You can download the latest version of Windows® Messenger
from Microsoft’s web site.
http://www.microsoft.com/
● Update your version of Windows® XP. Click the [Start], and select [Windows Update] in [All Programs]. For
details, refer to the Windows® XP help or the Microsoft website.
http://www.microsoft.com/
For details, refer to the help for the Windows® Messenger. Details on how to uses Windows® Messenger® are
expected to be available on the JVC web site.
JVC web site:
http://www.jvc-victor.co.jp/english/index-e.html
NOTES:
● When you use Windows® Messenger, your friend must use the same application. If your friend uses
Windows® NetMeeting®, please use Windows® NetMeeting® version 3.0 or later. (墌 pg. 40)
● If you are using a dial-up router or a broadband router, refer to the router’s instruction manual.
● If you are using a firewall or a router, it is not possible to connect to the internet properly.
● Consult your Internet service provider for details before using Windows® Messenger.
● Depending on the condition of the line, the quality of images or sound during videoconferences may differ.
● You can also send the video of a tape which the camcorder is playing back. In this case, set the camcorder
to the playback mode in step 3.
_001EN_PDF_05M3D7S-Appndix.fm
Page 43
Master Page: Left-Heading0
44 EN
LOADING FILES FROM A MEMORY CARD THROUGH AN ADAPTER
You can read and write files on a camcorder memory card by using an adapter (sold separately).
Floppy disk adapter
(CU-VFSD50)
: For PCs that do not have a USB connector, or which are running Windows® 95/
NT.
PC card adapter
(CU-VPSD60)
: For PCs with a PC card slot
USB reader/writer
(CU-VUSD70)
: For applications that use numerous memory cards
The following description assumes that a floppy disk adapter is being used. For details on how to use each
specific type of adapter, refer to the instructions provided with that adapter.
1
2
3
4
Remove the memory card from the camcorder.
Insert the memory card in the floppy disk adapter.
Insert the floppy disk adapter into the floppy disk drive of the PC.
Copy the necessary files from the floppy disk to the hard disk.
_001EN_PDF_05M3D7S-Appndix.fm
Page 44
Master Page: Right-Heading0
ADDING SOUND EFFECTS
EN
45
The provided CD-ROM contains sound effects files for use with camcorders. In order to use these files, copy
them to a memory card by the procedure described below. However, if your camcorder is not equipped with
Digital Sound Effect function, these files can not be used.
1 Open a memory card through the PC.
● Connect the camcorder to the PC with a USB cable referring to the Software Installation and USB
Connection Guide. Or use an adapter (墌 pg. 44).
2 Load the CD-ROM into the PC.
After the moment, the [Important Notice] screen appears.
● If the [Important Notice] screen does not appear, go to step 4.
3 Click [NEXT], and then click [EXIT].
4 Right-click the CD-ROM icon in [My Computer], and then in the menu that appears, click
[OPEN].
5 Open the [DCSD] folder in the CD-ROM.
6 Select the file to be used with the camcorder.
● You can play the sound effect by double-clicking the file icon.
7 Copy the selected file from the CD-ROM to the memory card.
● Copy to the [100JVCGR] folder in the [DCSD] folder.
_001EN_PDF_05M3D7S-Appndix.fm
Page 45
Master Page: Left-Heading0
46 EN
TROUBLESHOOTING
Windows®
SYMPTOM
CORRECTIVE ACTION
REFER TO:
Although the USB cable is
• Make sure that the AC Adapter is connected to the
connected, PC operating
camcorder and that the power is on.
system does not recognize the • Make sure that the USB cable is connected securely.
Software
memory card in the
Installation and
• Either use a USB hub that has its own power supply, or
camcorder.
USB
connect the USB cable directly to the PC’s USB
Connection
connector.
Guide
• Windows® might not be recognizing the USB connector.
Make sure that the Universal Serial Bus controller is
(墌 pg. 9)
enabled on the [System Properties] sheet in the [Control
Panel].
Cannot copy or save files.
• Make sure that there is enough free space available in the
drive where you are trying to copy or save a file.
• Make sure that the drive where you are trying to copy or
save a file is not write-protected.
• Make sure that a file with the same name does not
already exist where you are trying to copy or save a file.
• Either use a USB hub that has its own power supply, or
connect the USB cable directly to the PC’s USB
connector.
_001EN_PDF_05M3D7S-Appndix.fm
—
Page 46
Master Page: Right
TROUBLESHOOTING (cont.)
EN
47
Windows® (cont.)
SYMPTOM
Cannot load still images into
Digital Photo Navigator.
Still images have a mosaic
appearance.
CORRECTIVE ACTION
REFER TO:
• Sometimes the format of the still image data prevents it
from being loaded into Digital Photo Navigator. Use
other graphics drawing or processing software to convert
the file to either bitmap format or JPEG format.
• Make sure that there is enough free space available in the
drive in which Digital Photo Navigator is installed.
—
• When a small image is loaded and enlarged, it will take
on a mosaic appearance.
• If an image is saved with a lower JPEG quality or if the
format of the image is changed, it will take on a mosaic
appearance.
pg. 16
pg. 23
The colors displayed on the PC • Images will not be displayed correctly if the display is set
are odd.
for 256-color (or fewer) display.
—
No audio or video during
ImageMixer operations
• Verify and change Windows® and ImageMixer settings. If
this does not work, update your hardware drivers for
Windows® XP. You can download the latest version of the
drivers from your PC’s manufacturer’s website.
—
[Found New Hardware
Wizard] screen appears
(Windows® XP)
• Disconnect the cable, then connect the cable used when
installing the driver.
—
The created date of the file is
not displayed correctly on the
information display panel.
• The created date is not displayed if the date is not set on
the camcorder.
—
NOTE:
When using a laptop PC, operation may be interrupted by a warning when the battery is nearly exhausted.
● If there is software which monitors the status of the battery running in the [StartUp] folder…
Close the application, or delete/move its icon from the [StartUp] folder and reboot your PC.
● If you are using your PC’s power management function…
Right-click the [My Computer] icon, then select [Properties]–[System Properties]–[Device Manager]–
[System Devices]–[Advanced Power Management Support]. Deactivate the power management function.
_001EN_PDF_05M3D7S-Appndix.fm
Page 47
Master Page: Left
48 EN
TROUBLESHOOTING (cont.)
Macintosh
SYMPTOM
CORRECTIVE ACTION
Although the USB cable is
• Make sure that the AC Adapter is connected to the
connected, PC operating
camcorder and that the power is on.
system does not recognize the • Make sure that the USB cable is connected securely.
memory card in the
• Either use a USB hub that has its own power supply, or
camcorder.
connect the USB cable directly to the PC’s USB
connector.
Cannot copy or save files.
The created date of the file is
not displayed correctly on the
information display panel.
• Make sure that there is enough free space available in the
drive where you are trying to copy or save a file.
• Make sure that the drive where you are trying to copy or
save a file is not write-protected.
• Make sure that a file with the same name does not
already exist where you are trying to copy or save a file.
• Either use a USB hub that has its own power supply, or
connect the USB cable directly to the PC’s USB
connector.
• The created date is not displayed if the date is not set on
the camcorder.
_001EN_PDF_05M3D7S-Appndix.fm
REFER TO:
Software
Installation and
USB
Connection
Guide
(墌 pg. 13)
—
—
Page 48
Master Page: Right-Heading0
INDEX
EN
49
Windows®
Windows®/Macintosh
Adding still images to an album ........ 10
Capturing video from tape ................ 32
Changing the image size ................... 22
Capturing video in real time .............. 30
Changing the picture quality, etc. ...... 23
Creating a Video CD ......................... 37
Conducting a video conference
over the Internet ........................... 40
Copying still images .......................... 18
Creating a list of still images .............. 25
Creating a slide show or
an animation ................................ 26
Creating a web page .......................... 20
Deleting unnecessary still images ...... 18
Displaying a selected still image ........ 15
Displaying a series of images ............. 15
Enlarging and reducing images .......... 16
Exiting Digital Photo Navigator ......... 12
Loading an album ............................. 14
Retrieving still images
from an album ............................. 24
Selecting multiple still images ........... 17
Sending images
from an album in e-mail ............... 19
_001EN_PDF_06M3D7S-IX.fm
Page 49
Master Page: Cover4
_001EN_PDF_01M3D7S-Cover.fm Page 1 Wednesday, November 27, 2002 7:58 AM
Digital Photo Navigator
ImageMixer with VCD
COPYRIGHT© 2003 VICTOR COMPANY OF JAPAN, LTD.
_001EN_PDF_01M3D7S-Cover.fm
M3D7/D3/D1
1102-FO-ID
Page 1