Oracle 15.1.0.0.0 Banking Digital Experience Installation Manual
Reklama
Reklama
Oracle Banking Digital
Experience
Installation Manual
Release 15.1.0.0.0
Part No. E66313-01
October 2015
Installation Manual
October 2015
Oracle Financial Services Software Limited
Oracle Park
Off Western Express Highway
Goregaon (East)
Mumbai, Maharashtra 400 063
India
Worldwide Inquiries:
Phone: +91 22 6718 3000
Fax:+91 22 6718 3001 www.oracle.com/financialservices/
Copyright © 2008, 2015, Oracle and/or its affiliates. All rights reserved.
Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.
U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government end users are “commercial computer software” pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.
This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate failsafe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.
This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.
The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.
This software or hardware and documentation may provide access to or information on content, products and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services.
Oracle Banking Digital Experience Installation Manual ii
Table of Contents
Oracle Banking Digital Experience Installation Manual iii
Preface
1. Preface
This document will help you to install the Oracle Banking Digital Experience Application using the Installer. The document discusses the usage steps and inputs required for
Installer execution.
This preface contains the following topics:
Audience
Documentation Accessibility
Organization of the Guide
Related Documents
Conventions
1.1 Audience
This document is intended for the following audience:
Development Teams
Implementation Teams
Implementation Partners
1.2 Documentation Accessibility
For information about Oracle's commitment to accessibility, visit the Oracle Accessibility
Program website at http://www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc
.
Access to Oracle Support
Oracle customers have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=info
or visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs
if you are hearing impaired.
1.3 Organization of the Guide
The information in this document is organized into the following chapters and appendices:
Chapter 2, "Introduction"
This chapter provides brief introduction to OBDX installer.
Chapter 3, "OBDX Installer Execution Steps"
This chapter describes the pre-requisites and steps involved for Installer execution.
1.4 Abbreviations
The following abbreviations may be used within the document.
Abbreviation Meaning
Oracle Banking Digital Experience Installation Manual 4
Preface
OHS
RCU
SID
SSL
OBDX
DB
IAM
OID
OAM
OES
DIGX
MDS
OPSS
LDAP
Oracle Banking Digital Experience
Database
Identity Access Management
Oracle Internet Directory
Oracle Access Manager
Oracle Entitlements Server
Oracle HTTP Server
Repository Creation Utility
Service ID
Secured Socket Layer
Digital Experience
Metadata Services
Oracle Platform Security Services
Lightweight Directory Access Protocol
1.5 Conventions
The following text conventions are used in this document:
Convention Meaning boldface
italic monospace
Boldface type indicates file names, commands and elements associated with actions, text that appears on screen or the inputs to be provided.
Italic type indicates references or hints (notes) provided for user.
Monospace type indicates URLs.
Article I.
Oracle Banking Digital Experience Installation Manual 5
Introduction
2. Introduction
This guide helps you to install the Oracle Banking Digital Experience Application. OBDX
Installer is used to perform complete or partial setup for Oracle Banking Digital
Experience products. The installer consists of product archive and configuration files and is shipped to the client as a single deliverable CD.
Oracle Banking Digital Experience Installer is executed on LINUX based environments.
On invocation, the installer performs the tasks based on the option selection and using configurations provided in property files. Some activities and features performed by the toolkit are explained here. More details about each task are explained in detail in following sections.
2.1 Verification of the Shipped Archive
This task verifies whether the delivered archive is tampered and audits the same. In case of any mismatch found the toolkit abort itself and logs the details.
2.2 Application Setup
In case of Application Install option selected, the content of delivered archive is unzipped and copied to location relative to the application home.
The configuration file update is then performed based on provided inputs through properties file. The properties file values to be are taken as input from the toolkit user, as explained in later chapters.
2.3 Database Setup
In case of DB Install option selected this activity performs the creation of application DB users, application related database entities. Additional information on DB activity details, steps for performing this activity individually and actions required post this activity will be explained in later chapters.
2.4 Auditing and Logging Action
All the user entries as well toolkit activities are logged on screen as well as user defined log location. The verification screen allows the user to verify the inputs post which the progress of the installer is displayed to end user appropriately.
6 Oracle Banking Digital Experience Installation Manual
Oracle Banking Digital Experience Installation Execution Steps
3. Oracle Banking Digital Experience Installation
Execution Steps
This chapter provides detailed information about the installer workflow and the result entities created in the process. User needs to follow the step by step details to successfully install the delivered OBDX setup.
Pre-requisites
Invoke Installer in Command Prompt
Installing Schema for OBDX Loans Module using RCU
OBDX Loans Module Weblogic Configuration
Installing OBCP Schema using RCU
Configure Weblogic Domain for OBCP Application Server
Note :-- This document for installer of OBDX 15.1.0.0.0 is created assuming OAM, OID and OES are installed and are available for integration with OBDX. Although it is not mandatory to use the OAM, OID and OES for full setup.
3.1 Pre-requisites
Following should be present prior to executing OBDX Installer:
Adequate executable rights for application product installation directory creation, modification and deletion need to be present for the OBDX Installer user before execution of installation.
Application files and Weblogic domain if present must be deleted before invoking the Installer.
Also, stop any processes running on the ports mentioned for Weblogic configuration using the following steps :--
netstat
–tulpn | grep <port_number>
The above command will display the process id for the tasks running on the mentioned port in the following format,
tcp 0 0 127.0.0.1:<port_number> 0.0.0.0:* LISTEN
<process_id>/java
To stop the running task, type the command kill -9 <process_id> and press <Enter>.
Oracle Database is installed and present on the OBDX Database Server.
Oracle Repository Creation Utility along with instance for OBDX primary database is present and setup on the OBDX Database Server. Adequate Db login credentials
(SYSDBA login details as well as additional DB details) are present.
Schemas for MDS (Optional), OES(Optional), OID(Optional) and OAM(Optional) are present and setup on the above DB Server or on different servers.
The server on which the OBDX Application will be installed should have following :-
--
Weblogic Installation with the patch of IAM (Optional)
Oracle SQL * Plus Client is installed and present on the installer machine.
Oracle Banking Digital Experience Installation Manual 7
Oracle Banking Digital Experience Installation Execution Steps
Independent Installation of Simple OHS for GUI on the same machine or different machine.
Installations for OID(Optional) , OAM (Optional) and OES (Optional) individually on the same machine or on different machines.
Independent Installation of OHS (Oracle HTTP Server) Web tier on same machine or on different machine with the Patch of
Webgate for OAM (Optional)
Note: Please refer the Table 1-1 and 1-2 below for specific versions for respective software.
Table 1
–1 OBDX Installer: Software Versions on installation machine
Srl. # Software Version
1.
2.
JDK
Oracle SQL * Plus Client
1.7
11g or Higher
3.
4.
5.
Oracle Repository Creation Utility (RCU) 11.1.2.2
Oracle Weblogic Server 10.3.6
Oracle Identity Access Management (IAM) 11.1.2.2
6. Oracle HTTP Server Web tier (GUI) 11.1.1.7
Table 1
–2 OBDX Installer: Software Versions on same/different machines
Srl. # Software Version
1.
2.
3.
4.
5.
6.
Oracle Database
11 g or Higher
Oracle Repository Creation Utility (RCU) for
OID
Oracle Repository Creation Utility (RCU) for
OAM
11.1.1.7
11.1.2.2
Oracle Repository Creation Utility (RCU) for
OES
11.1.1.9
Oracle OPSS Client (LDAP-based or DB-based policy store)
11.1.2.2
Oracle Entitlement Server (LDAP-based or DBbased policy store)
Oracle Access Manager
11.1.2.2
11.1.2.2 7.
8.
Oracle Internet Directory
Oracle Banking Digital Experience Installation Manual
11.1.1.7
8
Oracle Banking Digital Experience Installation Execution Steps
9.
Oracle HTTP Server Web tier
11.1.1.7
10.
Oracle HTTP Server Webgate
11.1.2.2
3.2 Invoke the Installer in Command Prompt
You must follow the below steps to invoke the Installer:
Copy the installation content from the deliverable (CD) to a temporary installation location on the server where OBDX product is required to be deployed. This location can be purged after successful execution of the installation. Also delete the contents if already present before copy.
Modify the installer.properties files placed in property_files folder of respective setup i.e. OBDX and OBCP. Table 2-1 and 2-2 provides a list of inputs to be modified before invoking the Installer for respective setup.
Table 2-1 OBDX Installer Properties: Initial Details
Field Description
INSTALLERHOME
Location on the server where the installation files are stored.
Location on the server where the Weblogic is installed
WEBLOGICHOME
CLIPHOME
Location on the server where OBDX application files are stored.
Location on the server where the RCU is placed.
RCUHOME
DATABASEIP
Used to specify the database host IP address. For example, 10.180.6.11.
DATABASEPORT
DATABASENAME
PRODUCTVERSION
Used to specify the database port. For example, 1521.
Used to specify the database Service ID (SID). For example, ORCL.
Used to specify the version of OBDX. For example,
15.1.0.0.0
Used to specify the tablespace path.
TABLESPACE
DATABASEPOSTFIX
Used to specify the schema postfix. For example, APP.
RCU_CLASSPATH
Used to specify the path of RCU configuration folder.
Oracle Banking Digital Experience Installation Manual 9
Oracle Banking Digital Experience Installation Execution Steps
Field
WeblogicUsername
Description
Used to specify the Weblogic Server Admin user name.
DomainName
Used to specify the Weblogic Domain Name
AdminServer Details
Used to specify Admin server details i.e. Name, Non-SSL and SSL Listen port.
ManagedServer
Details
MachineName
Used to specify Managed server details i.e. Name and
Listen port
NodeManagerPort
Used to specify the Machine Name
Used to specify the port of Node Manager
Data Source Name
JNDI Name
Used to specify the names of various Datasources to be created i.e. DIGX, MDS and OPSS.
Used to specify the JNDI Names of various databases used for Datasource creation.
JDBC URL Details
Schema Name
WALLETHOME
OHSPATH
Used to specify the IP, Port and Service ID of various databases used for Datasource creation.
Used to specify the Schema names for Datasource.
Used to specify the path where the file “ewallet.p12” exists.
Used to specify path of the file “httpd.conf” (OHS setup) exists.
ALIAS
Used to specify Application link alias.
POLICYSTORE_TYPE
Used to specify target servertype as DB server. For example, DB_ORACLE.
LDAP_URL
Used to specify the LDAP server URL.
Table 2-2 OBCP Installer Properties: Initial Details
Field Description
INSTALLERHOME
Location on the server where the installation files are stored.
Oracle Banking Digital Experience Installation Manual 10
Oracle Banking Digital Experience Installation Execution Steps
Field
WEBLOGICHOME
OBCP_HOME
Description
Location on the server where the Weblogic is installed
RCUHOME
DATABASEIP
ADMINNICKNAME
Location on the server where OBCP application files are stored.
Location on the server where the RCU is placed.
Used to specify the database host IP address. For example, 10.180.6.11.
Used to specify the database port. For example, 1521.
DATABASEPORT
DATABASENAME
PRODUCTVERSION
Used to specify the database SID. For example, ORCL.
Used to specify the version of OBDX. For example,
15.1.0.0.0
TABLESPACE
Used to specify the tablespace path.
DATABASEPOSTFIX
Used to specify the schema postfix. For example, APP.
RCU_CLASSPATH
Used to specify the path of RCU configuration folder.
APPSCHEMA
Used to specify App Schema name. For example,
OBCPAPP.
Used to specify the nick name for ADMIN Schema. For example, SUPERADMIN.
Used to specify the salutation. For example, Mr.
SALUTATION
FIRST_NAME
LAST_NAME
Used to specify the FIRST Name. For example,
SUPERADMIN.
Used to specify the LAST Name. For example,
SUPERADMIN.
EMAILID
CHANNEL_USERID
Used to specify the email id.
SUPERADMIN_ROLE
Used to specify the Super Admin Role. For example,
SUPERAMDIN.
Used to specify the Channel User ID. For example,
SUPERADMIN.
Oracle Banking Digital Experience Installation Manual 11
Oracle Banking Digital Experience Installation Execution Steps
Field
TIME_ZONE
Description
Used to specify the time zone. For example,
Asia/Calcutta.
ENTITYSCHEMANAM
E
Used to specify the Entity Schema Name. For example,
OBCPB001.
IDENTITY
Used to specify the identity. For example, B001.
ADMIN_SCHEMA
Used to specify Admin Schema Name. For example,
OBCPADMIN.
HOST_SCHEMA
Used to specify the Host Schema username. For example, OBCP1501.
HOST_SCHEMA_PWD Used to specify the Host Schema password. For example, OBCP1501.
HOST_SCHEMA_HOS
TNAME
Used to specify the Host’s IP. For example, 10.180.6.11
HOST_SCHEMA_POR
T
Used to specify the Host Schema Port. For example,
1521.
HOST_SCHEMA_SID
Used to specify the Host Schema Service ID. For example, orcl.
WeblogicUsername
DomainName
Used to specify the Weblogic Server Admin user name.
Used to specify the Weblogic Domain Name
AdminServer Details
Used to specify Admin server details i.e. Name, Non-SSL and SSL Listen port.
ManagedServer
Details
Used to specify Managed server details i.e. Name and
Listen port
Used to specify the Machine Name
MachineName
NodeManagerPort
Data Source Name
Used to specify the port of Node Manager
Used to specify the names of various Datasource to be created i.e. A1 and A1B1.
JNDI Name
Used to specify the JNDI Names of various databases used for Datasource creation.
Oracle Banking Digital Experience Installation Manual 12
Oracle Banking Digital Experience Installation Execution Steps
Field
JDBC URL Details
Schema Name
FCON.A1.USER
FCON.A1.LDB.URL
<ehms\ user> host_name
Description
Used to specify the IP, Port and Service ID of various databases used for Datasource creation.
Used to specify the Schema names for Datasource.
Used to specify the username of App Schema.
Used to specify the LDB URL in the format
HOSTNAME:DATABASEPORT/SERVICEID. For example, 10.180.6.11:1521/orcl.
Used to specify Entity Schema username.
Used to specify the Host Server IP. For example,
10.180.6.11
Port
Used to specify the Managed server port.
Modify app_server_classpath.txt (contains Classpath for OBDX Application Server) and app_server_arguments.txt (contains Arguments for OBDX Application Server) placed in property_files folder for the respective setup i.e. OBDX and OBCP.
Modify oid.properties, groups.ldif and users.ldif from obdx/user_group folder. These files contain details used to create LDAP Users and Groups during OBDX Loans
Module Application Setup.
On completion of above steps, invoke installer.sh as follows,
The Installer provides command mode of execution. Command mode accepts the input on system command prompt. In order to run the executable provide the path of directory where the executable resides and then invoke it as shown below and press <Enter>
For Linux: sh installer.sh
This option invokes the installer in command prompt. All inputs will be sequentially asked by command line prompts.
Note: The OBDX Installer can be aborted by doing Ctrl+C button and restarted in case of any detail missing or incorrect in installer.properties file or on command line.
3.3 Installing Schema for OBDX Loans Module using RCU
Follow the below mentioned steps to install the database schema for OBDX Loans
Module Application using Repository Creation Utility (RCU):
On invoking the installer.sh, the following screen is displayed to the user.
Oracle Banking Digital Experience Installation Manual 13
Oracle Banking Digital Experience Installation Execution Steps
1.
The user will have to choose the option for Installation to be done.
Install OBDX Loans Module Application.
2. Install OBCP Application.
3. Exit.
In this case,
Press ‘1’ <Enter>
On selection of above option, following options will be prompted to the user,
1.
2.
Setup full Database for Loans Module Application.
Implement Weblogic configuration for Loans Module Application.
3. Setup full database and Loans Module Application Weblogic configuration.
4. Exit.
Oracle Banking Digital Experience Installation Manual 14
Oracle Banking Digital Experience Installation Execution Steps
Note: On choosing option 3 the below mentioned screens will appear in succession.
In this case,
Press ‘1’ <Enter>
On choosing Option 1 following screen appears:
To proceed press <Y> and <Enter>.
The installation begins with the execution of RCU for creating schema user for Loans
Module and it is noticed that the complete console screen goes blank as shown below.
RCU does not display or prompt any message on command window, but simply waits for the user to input the passwords.
1. Following are the passwords to be provided,
Installer: RCU Inputs for OBDX Schema Creation
Oracle Banking Digital Experience Installation Manual 15
Oracle Banking Digital Experience Installation Execution Steps
List of Passwords Description
SYSDBA Password
Password of the DB user to be used to create
OBDX DB Schema and objects. The DB user should have SYSDBA role.
2.
3.
4.
Schema Password
Password of the Schema which will be created for
OBDX.
At the first instance, input the SYS passwords, press <Enter>. The entered password is verified internally. If found ok then once again the contents on the screen will disappear and above blank screen will be displayed.
Now, input the Schema Password which will be created by RCU and press <Enter>.
Once the installation is completed “Repository Creation Utility - Create: Operation
Completed
” message will be displayed.
3.4 OBDX LOANS MODULE WEBLOGIC CONFIGURATION
Follow the below mentioned steps to create and configure the Weblogic Domain for
OBDX Loans Module Application:
On invoking the installer.sh, the following screen is displayed to the user.
The user will have to choose the option for Installation to be done.
1.
2.
Install OBDX Loans Module Application.
Install OBCP Application.
3. Exit.
In this case,
Press ‘1’ <Enter>
On selection of above option, following options will be prompted to the user,
Oracle Banking Digital Experience Installation Manual 16
Oracle Banking Digital Experience Installation Execution Steps
1.
2.
3.
4.
Setup full Database for Loans Module Application.
Implement Weblogic configuration for Loans Module Application.
Setup full database and Loans Module Application Weblogic configuration.
Exit.
Note: On choosing option 3 the below mentioned screens will appear in succession.
In this case,
Press ‘2’ <Enter>
On Pressing option 2 the following screen will appear.
To proceed press <Y> and <Enter>.
1. In this case, Installer will prompt the following set of passwords on command line before starting the installation as shown in the screen below,
Oracle Banking Digital Experience Installation Manual 17
Oracle Banking Digital Experience Installation Execution Steps
2. Input all the passwords when prompted and press <Enter>. Refer to the table below for additional details of each password,
3.
Installer: Inputs for OBDX Weblogic Configuration
List of Passwords
Weblogic Password
DIGX Schema
OPSS Schema
Description
Weblogic Console Password
Password of OBDX Schema created using RCU. This will be used for DIGX DataSource configuration.
OPSS Schema Password. This will be used for OPSS
DataSource configuration.
MDS Schema
MDS Schema Password. This will be used for MDS
DataSource configuration.
Password of connecting to LDAP server.
ldapCredentials
OPSS Schema
OPSS Schema Password. This will be used to update
LDAP Security Policies.
The installation starts and once the installation is completed “Installation Complete” message will be displayed.
18 Oracle Banking Digital Experience Installation Manual
Oracle Banking Digital Experience Installation Execution Steps
Note:
1) Selection of option ‘3’ will install the complete setup for OBDX Loans Module wherein the steps mentioned above for Install DB Schema and Configure Application Server will be combined i.e. the creation of application DB user and entities is followed by
Application Server Setup.
2) In case where DB Installation step is skipped it is assumed that the DB installation is done completely along with OBDX Database users created. Although DB installation can be performed at a later stage, the DB login details (Database Administrator User
Credentials etc.) should be present at the time of OBDX Application Server Setup.
3.5 Installing OBCP Schema using RCU
Follow the below mentioned steps to install the OBCP Database Schema:
On invoking the installer.sh, the following screen is displayed to the user.
Oracle Banking Digital Experience Installation Manual 19
Oracle Banking Digital Experience Installation Execution Steps
1.
2.
3.
User will have to choose the option as follows,
Install OBDX Loans Module Application.
Install OBCP Application.
Exit.
In this case,
Press ‘2’ <Enter>
The installer will then prompt the user with following options as shown in the screenshot below,
Oracle Banking Digital Experience Installation Manual 20
1.
2.
3.
4.
Oracle Banking Digital Experience Installation Execution Steps
Install Database for OBCP.
Install OBCP Application.
Install Database & Application for OBCP.
Exit.
In this case,
Press ‘1’ <Enter>.
On selection of above option, following options will be prompted to the user,
To proceed press <Y> and <Enter>.
The installation begins and it is noticed that the complete console screen goes blank as shown below.
RCU does not display or prompt any message on command window, but simply waits for the user to input the passwords.
21 Oracle Banking Digital Experience Installation Manual
Oracle Banking Digital Experience Installation Execution Steps
1.
2.
Following are the passwords to be provided,
Installer: RCU Inputs for OBCP Schema Creation.
List of Passwords Description
SYSDBA Password
Password of the DB user to be used to create OBCP DB
Schema and objects. The DB user should have SYSDBA role.
Schema Password
Password of the Schema which will be created for OBCP
Admin and Entity.
At the first instance, input the SYS passwords, press <Enter>. The entered password is verified internally. If found ok then once again the contents on the screen will disappear and above blank screen will be displayed.
Oracle Banking Digital Experience Installation Manual 22
3.
Oracle Banking Digital Experience Installation Execution Steps
Now, input the Admin Schema Password which will be created by RCU and press
<Enter>. The installation begins and following screen appears,
4. Once the installation is completed “Repository Creation Utility - Create: Operation
Completed
” message will be displayed and again the contents disappear from the screen.
5. Now, input the SYS password once more and press <Enter>. The entered password is verified and the on successful verification the screen again goes blank.
23 Oracle Banking Digital Experience Installation Manual
Oracle Banking Digital Experience Installation Execution Steps
6. Now, input the Entity Schema Password which will be created by RCU and press
<Enter>. The installation begins and following screen appears,
7. Once the installation is completed “Repository Creation Utility - Create: Operation
Completed
” message will be displayed.
3.6 Configure Weblogic Domain for OBCP Application Server
Follow the below mentioned steps to create and configure Weblogic Domain for OBCP
Application Server:
On invoking the installer.sh, the following screen is displayed to the user.
Oracle Banking Digital Experience Installation Manual 24
Oracle Banking Digital Experience Installation Execution Steps
1.
2.
3.
User will have to choose the option as follows,
Install OBDX Loans Module Application.
Install OBCP Application.
Exit.
In this case,
Press ‘2’ <Enter>.
The installer will then prompt the user with following options as shown in the screenshot below:
Oracle Banking Digital Experience Installation Manual 25
1.
2.
3.
4.
Oracle Banking Digital Experience Installation Execution Steps
Install Database for OBCP.
Install OBCP Application.
Install Database & Application for OBCP.
Exit.
In this case,
Press ‘2’ <Enter>.
On selection of above option, following options will be prompted to the user,
1.
To proceed press <Y> and <Enter>.
In this case, before staring the installation the Installer will prompt the passwords shown in the screen below. For more details of each password, refer to the table provided below.
Oracle Banking Digital Experience Installation Manual 26
Oracle Banking Digital Experience Installation Execution Steps
2.
Installer: Inputs for OBCP Weblogic Configuration.
List of Passwords Description
OBCP App Schema
Password of OBCP Schema created using RCU. This will be used for A1 DataSource configuration.
OBCP Entity Schema
Password of OBCP Entity Schema created using RCU. This will be used for B1A1 DataSource configuration.
Input the above passwords and press <Enter>. The Installer will then prompt another set of passwords as shown below,
Oracle Banking Digital Experience Installation Manual 27
Oracle Banking Digital Experience Installation Execution Steps
Installer: Inputs for OBCP Weblogic Configuration.
List of Passwords Description
Weblogic Password
Weblogic Console Password
OBCP App Schema
Password of OBCP Schema created using RCU. This will be used for A1 DataSource configuration.
OBCP Entity Schema
Password of OBCP Entity Schema created using RCU. This will be used for B1A1 DataSource configuration.
3.
4.
5.
Input all the passwords when prompted and press <Enter>.
The installation starts and once the installation is completed “Installation Complete” message will be displayed.
For log refer <%Installation_home%>/logs/ obdx151000.log.
Note:
1) Selection of option ‘3’ will install the complete setup for OBCP wherein the steps mentioned above for the creation of DB user and entities, is followed by Application
Server Setup.
2) In case where DB Installation step is skipped it is assumed that the DB installation is done completely. Although DB installation can be performed at a later stage, the DB login details (Database Administrator User Credentials etc.) should be present at the time of OBCP Application Server Setup.
3.7 Steps Post Installer Execution
1.
2.
3.
4.
5.
This chapter lists the steps to be performed manually by the user after a particular installation is complete by the installer.
Once the above mentioned steps are complete, administrator needs to run the sql script using the sql client.
Follow the below steps to proceed:
Go to location <%Installer_Home%>/obcp/rcu-obcp/rcu/integration/obcp/dbsetup/seed
Start sql*plus
Run seed.sql in sql*plus.
Connect
OBCPADMIN_<%post_fix%>/<%password%>@<%database_ip%>:<%database_port%
>/<%database_service_id%>. spool <%Log path%>@<%Installer_Home%>/obcp/rcuobcp/rcu/integration/obcp/dbsetup/seed/see.sql.
Spool off.
28 Oracle Banking Digital Experience Installation Manual
Stáhnout
Veřejný odkaz aktualizován
Veřejný odkaz na váš chat byl aktualizován. You may view and manage your chat links after registration here.
Veřejný odkaz na dokument
Reklama