Kettler VERSO TX1, TX3 Foldable Treadmill Foldable Treadmill Owner's Manual

PDF

سند

تبلیغات

VERSO by Kettler™

TX1

Item# 7882-090 and Item # 7882-099 (230v)

TX3

Item# 7883-090 and Item# 7883-099 (230v)

Foldable Treadmill Owner’s Manual

TX1 #7882-090 & 7882-099

KETTLER International Inc.

1355 London Bridge Rd.

Virginia Beach, VA 23453

Office Phone: 757-427-2400

Office Fax: 757-427-0183

Parts & Service Department:

Phone: 866-804-0440

Email: [email protected]

Retain this owner’s manual for future reference.

Read and follow all instructions in this owner’s manual.

Console with 5 LED windows

Water bottle holder and accessory holder built into the console.

TX1 INTRODUCTION:

Contact heart rate hand sensors for quick check of your pulse.

Safety key – treadmill will not activate unless the safety key is secured in place.

Horizontal bar with foam grip

Handle bar with foam grip

Upright post

Motor cover

Running belt

Patented folding lock release

Wide side landing to place your feet before and after your workout, or anytime you feel like a rest during the workout.

Running belt adjustment to adjust belt tension or to center the running belt

Owner’s Manual

KEY FEATURES:

CAUTION!

Congratulations on choosing a state-of-the-art treadmill.

You have taken the first step to a healthier and more rewarding lifestyle.

exercise program, always consult your physician. If you

workouts in the comfort of your home. Please find below the features and benefits of this treadmill.

nausea, dizziness or shortness of breath,

STOP exercising and

The base frame is hidden below the main frame to maximize the running surface size.

consult your physician before continuing.

Gas assisted lift makes folding and unfolding of the deck safe and easy.

The folding lock release mechanism is located at the end of the deck so that when folded, only adults can access the release.

Built-in wireless pulse receiver compatible with Polar® and CardioSport ® chest straps to monitor your heart rate during exercise. Wireless chest strap transmitter is optional.

Low impact design with cushions so that your joints are protected against injury.

Self-centering belt alignment helps to keep the running belt always tracked correctly in the center.

TX3 INTRODUCTION:

Console with text messages makes customizing your workout easily.

Big LED and dot matrix display windows for real time feed back of all workout stats.

Contact heart rate hand sensors for quick check of your pulse.

Safety key – treadmill will not

Owner’s Manual

Horizontal bar with foam grip

KEY FEATURES:

CAUTION!

Congratulations on choosing a state-of-the-art treadmill.

You have taken the first step to a healthier and more rewarding lifestyle.

exercise program, always consult your physician. If you

workouts in the comfort of your home. Please find below the features and benefits of this treadmill.

The base frame is hidden below the main frame to maximize the running surface size.

Owner’s Manual

STOP exercising and consult your physician before continuing.

Gas assisted lift makes folding and unfolding of the deck safe and easy.

The folding lock release mechanism is located at the end of the deck so that when folded, only adults can access the release.

Wireless pulse receiver compatible with Polar® and CardioSport® chest straps to monitor your heart rate during exercise.

Low impact design with cushions so that your joints are protected against injury.

Self-centering belt alignment so that the running belt is always tracked correctly in the center.

SPECIAL FEATURES:

Model #

Special features

TX3

Message instructions

Direct speed control

Speed and elevation adjust buttons at the handlebar

Service notice

Extended handlebar

Back cover

I

IMPORTANT SAFETY PRECAUTIONS:

When using an electrical product, basic precautions should always be followed. Read all instructions before using this treadmill.

Connect this unit to a

WARNING!

GROUNDING INSTRUCTIONS

properly grounded outlet only.

This product must be grounded! If treadmill should malfunction or break down, grounding provides a path of least resistance for electrical current to reduce the risk of electrical shock.

This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. This plug must be connected to an appropriate outlet that is properly installed and grounded in accordance with local codes and ordinances.

DANGER!

Improper connection of the equipment-grounding conductor can result in a risk of electrical shock.

Check with a qualified electrician or service technician if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

ELECTRICAL SAFETY

To reduce the risk of burns, fire, electrical shock or injury to persons, take the following precautions.

DO NOT leave the treadmill unattended at any time when plugged in. Unplug the treadmill from the power source when it is not in use.

DO NOT use the treadmill if the unit is wet or the plug or cable is damaged or the treadmill is not working properly. DO NOT use damaged or defective equipment. Keep equipment out of use until unit is repaired by trained technician.

Keep the power cable and plug away from heated surfaces.

NEVER place the power cord under carpeting or have any object on top of the power cord.

ONLY use the power cord provided with this treadmill.

To disconnect, turn the switch to the off position, then remove the plug from the outlet.

This exercise equipment is designed and built for optimum safety for the home use. However, certain precautions always apply whenever you operate any exercise equipment. Be sure to read the entire manual before assembly and operation of this machine. Also, please note the following safety precautions.

CAUTION!

STOP your workout

Owner’s Manual

feel any pain or abnormal symptoms and consult your

MECHANICAL SAFETY

Before you start exercise, make sure the unit functions correctly. To maintain the safety level of the exercise equipment, DO NOT use a faulty device.

Replace defective components immediately and/or keep the equipment out of use until repair.

Inspect the equipment prior to exercising to ensure that all nuts and bolts are fully tightened before each use.

DO NOT use attachments not recommended by the manufacturer.

NEVER drop or insert any object into any opening.

ONLY one person may use the treadmill at a time.

NEVER activate the speed when someone else is standing on the treadmill.

APPROPRIATE ATTIRE

Always wear appropriate clothing. DO NOT wear clothing that might catch on any part of the treadmill.

Always wear non-slippery shoes during workout with the treadmill. DO NOT wear shoes with heels or leather soles. Check the soles of your shoes and remove any dirt and embedded stones.

CHILDREN AND PETS

Most exercise equipment is not recommended for use by young children.

Children should not use the equipment unless they are under constant adult supervision.

To ensure safety, keep young children off the treadmill at all times.

■

Exercise equipments have many moving parts. In the interest of safety, keep others

(especially children and pets) at a safe distance while you exercise.

Owner’s Manual

II. SETTING UP YOUR TREADMILL:

CAUTION!

Make sure the running deck is level to the ground.

If the deck is positioned on uneven surface, it would cause premature damage to the

electronic system.

PLACEMENT IN YOUR HOME

To make exercise a desirable daily activity for you, the treadmill should be placed in a comfortable and convenient setting. This treadmill is designed to use a minimal amount of floor space and to fit nicely in your home. z

DO NOT place the treadmill outdoors. z

DO NOT place the treadmill near water or in high moisture content environment. z

Make sure power cord is not in the path of heavy traffic. z

If your room is carpeted, check the clearance to make sure there is enough space between the carpet fiber and the treadmill deck. If you are uncertain, it is best to place a mat beneath your treadmill. z

Locate the treadmill at least 4 feet from walls or furniture. z

Allow a safety area of 5 feet X 3 feet behind the treadmill so that you can easily get on and off the treadmill without being trapped during an emergency.

Occasionally after extended use you will find a fine black dust below your treadmill. This is normal wear and DOES NOT mean there is anything wrong with your treadmill. This dust can be easily removed with a vacuum cleaner. If you wish to prevent this dust from getting on your floor or carpet, place a mat beneath your treadmill.

LEVELING THE BASE

It is important that you place the treadmill on a firm level surface.

Check the treadmill to ensure the frame is level once you have moved the treadmill into the position of your choice.

USE DEDICATED CIRCUIT

The outlet selected should be a dedicated circuit. It is particularly important that NO sensitive electrical equipments, such as computer or TV, share the same circuit.

Owner’s Manual

III. HANDLING YOUR TREADMILL:

FOLDING THE TREADMILL

Folding and unfolding of this treadmill is made easy with the assistance of gas shock. After the treadmill has come to a complete stop, it is important to make sure the elevation is lowered all the way to the lowest level before folding the treadmill. The display console will indicate “0% elevation” in the lower left window when positioned at the lowest level. With caution, fold up the deck slowly with both hands. Fold the deck vertically upright until you hear a click, then the folded deck is locked in place. Please note that if you failed to lower the elevation to the lowest level (0% elevation) then the folding safety lock will not click nor lock in place. Be certain the fold lock clicks and locks in place,

UNFOLDING THE TREADMILL

Pull out the lock pin on the upright post (L) with your left hand. At the same time, press the deck slowly with right hand. Use both hands to bring the deck slowly to the ground. As the deck gets closer to the ground, it will drop at a faster rate and feel heavier. Please handle with caution.

MOVING THE TREADMILL

This treadmill is easy to move around safely.

To move the treadmill:

Turn power switch off.

Unplug the power cord.

Make sure the deck is at 0% grade elevation.

Fold the treadmill and make sure lock is engaged. You should hear a click to indicate positive engagement.

Simply roll the treadmill on four wheels to the desired location.

STORING THE TREADMILL

For safety precaution, especially when you have children in the house, we recommend that you follow these steps to keep the treadmill out of potential harm.

Turn off the power switch when you have finished workout.

Disconnect the plug from the wall socket.

Remove the safety tether key and store out of reach of children.

Owner’s Manual

IV. OPERATING THE TREADMILL:

TURN POWER ON

WARNING!

NEVER use this treadmill without first

The ON/OFF switch for the treadmill is located next to the power supply cord at the back of the motor cover. Flip this switch to the “ON” position.

securing the safety

SAFETY TETHER KEY AND CLIP

tether clip to your clothing.

The safety key is designed to cut the main power to the treadmill should you fall. Therefore, the safety key is designed to bring the treadmill to a abrupt stop. At high speeds, it may be

CAUTION!

uncomfortable and somewhat dangerous to come to a complete stop immediately. So, use the

For your safety, step onto the belt when the speed is no more

safety key as emergency stop only. To bring the treadmill to a complete stop safely and comfortably, use the red stop button.

than 1.5 MPH or 2.4

Your treadmill will not start unless the safety key is properly inserted into the key holder at the

Km/H.

side of the console. The other end of the safety key should be securely clipped to your clothing so that in case you fall, you will pull the safety key from the console, which will stop the treadmill

NEVER start the

immediately to minimize injury. For your safety, never use the treadmill without securing the

treadmill at a running

safety key clipped to your clothing. Pull on the safety key clip to make sure it will not come off

speed and attempt to

your clothing.

get on while it is moving fast.

GETTING ON AND OFF THE TREADMILL

NOTE!

Handle with care when getting on or off the treadmill. Try to use the handlebars while getting

The deck should NOT be folded unless the

on or off safely. While you are preparing to use the treadmill, do not stand on the running belt.

Straddle the running belt by placing your feet on both side rails of the treadmill deck. Place

elevation is at 0%

your foot on the belt only after the belt has begun to move at a consistent slow speed.

grade. Attempts to fold the deck while it

During exercise, keep your body and head facing forward at all times. Never attempt to turn

is elevated may

around on the treadmill when the running belt is still moving. When you have finished

cause damage to the

exercising, stop the treadmill by pressing the red stop button. Wait until the treadmill comes to

frame.

a complete stop before attempting to get off the treadmill .

If you feel uneasy with the speed and are not sure how to stop, hold the handlebars, lift your feet off the running belt and place on both sides of the side landing. The side landing is a non-moving platform and would be a good place to rest before resuming the workout. Always remember to start at a low speed for your safety and comfort.

Owner’s Manual

V. OPERATING THE CONSOLE TX1:

MODEL TX1

DISPLAY VALUES

ELEVATION (%)

DISTANCE (Miles)

DISTANCE (Km)

SPEED (MPH)

XX.X

SPEED (Km/H)TX1 XX.X

TIME XX:XX

0-12

00.1 – 99.0

00.5 – 10.0

0.1

01.0 – 16.0 0.1

00:01 – 99:00 00.01

Pulse indicator

UP – elevation up

DOWN – elevation down

NOTE: Display can be switched between Mile/MPH or Kilometer/Km/H readouts.

See “Unit Conversion” on page 13

Service required indicator

LED display windows

FAST – increase speed

SLOW – decrease speed

QUICK START /

START / ENTER - three different functions

PROGRAM – program selection

VIEW – pulse or calories display selection

HOLD – display pulse or calories

SCAN – display both interchangeably

COOL DOWN

PAUSE – press once to pause

STOP – press twice to stop

Owner’s Manual

SPEED ADJUSTMENTS

A single press of FAST and SLOW buttons will adjust speed by increments of 0.1 MPH (or Km/H) during workout…or you may press and hold these buttons to quickly scroll up or down.

ELEVATION ADJUSTMENTS

For safety reasons, the elevation level is designed to be manually adjusted for most applications.

The treadmill will only automatically adjust elevation during one of the following three programs:

P2 = elevation program, H-SE = HRC by speed and elevation, and H-E = HRC by elevation. You will find more details in the “Preset Programs” section beginning on page 15.

Elevation may be manually adjusted even while the running belt is not moving, however, during the program setup mode, elevation will not be adjustable.

PULSE FUNCTION

This treadmill features wireless heart rate monitoring, the most advanced technology to date for accurate read out of your heart rate. For convenience, this treadmill is also designed to pick up heart rate info via the contact sensors located on the horizontal handlebar. Treadmill will look for wireless pulse signal first. If no wireless pulse signal is present, then treadmill will look for the signal from contact sensors.

To use the wireless pulse monitoring system, you must wear the heart rate transmitter chest strap. Place the contact surface next to your skin directly under your heart to pick up the pulse signals from your heart. The heart rate transmitter strap is an optional purchase and not included with this treadmill.

To use the contact heart rate, place your hands gently but firmly around the contact sensors on the handlebars. Movements in the hands may cause difficulty for the treadmill to pick up the signal properly. When signal is picked up, the LED light next to the pulse display window will light up and flash to the rate of your heart beat.

Please note that some fibers used in clothes (e.g. polyester, polyamide) create static electricity which may prevent reliable heart rate measurement. Also, note that mobile phone, television and other electrical appliances form an electro-magnetic field around them, which may also cause problems in heart rate measurement.

PAUSE FUNCTION

When STOP button is pressed during workout, the program is suspended. After the running belt has come to a complete stop, display will count down from 03:00. During pause mode,

Owner’s Manual

only START and STOP buttons will function.

If START is pressed within three minutes during the pause mode, the treadmill will bring the running belt movement back to the speed at which the treadmill was paused. Workout values will resume counting and continue where it left off.

If STOP is pressed during the pause mode, the program will end. After three minutes if no button is pressed, treadmill will automatically end the workout program.

END OF WORKOUT STATS

When you have completed your workout or if you have ended your workout, the display windows will report your workout stats for one minute. After the running belt has come to a complete stop, the displays will show total time, total distance, total calories and average speed. Then the display will go to idle mode, ready for the next workout setup. If you wish to skip the workout stats report, simply press the STOP button, which will skip display to the idle mode.

UNIT CONVERSION

To change units from metric to English or English to metric, you must be in the idle mode.

Follow the steps below to make the unit conversion.

Simultaneously press both the STOP and SLOW together.

The message center will display “unit”.

Simply press START to confirm.

Notice that the LED lights next to both the speed and distance display windows on the upper right corner will have changed the measurement unit accordingly.

VIEW / PROGRAM

During workout setup – this button will select program.

During workout – this button will change PULSE to CALORIES or CALORIES to PULSE.

SCAN / HOLD

This button will allow user to view both calories and pulse display values intermittently (SCAN).

The user may select to steadily view only calories or only pulse (HOLD).

COOL DOWN

Whenever you are ready to stop your workout, even if you are in the middle of a program, be sure to use the COOL DOWN program. When the cool down button is pressed, it will automatically interrupt the current workout and go directly into cool down routine, which is programmed for four minutes. The first two minutes will reduce speed and elevation by 50% of

Owner’s Manual

your last display values. The last two minutes will reduce speed by another 50% and the elevation will reduce to 0%.

Owner’s Manual

PRESET PROGRAMS:

QUICK START:

QUICK START

Once the power is on and the safety tether

Once the power switch is turned on and the safety key is secured in place, simply press the

QUICK START button. Treadmill will activate at 1.0 Km/H (.6 mph) after 3 seconds. You may increase/decrease speed or elevation at any time during your workout. To end workout, simply

simply press the

START button, and after three- second count down treadmill will activate and maintain the running belt at .5 MPH (1.0

Km/H).

up. During other program workouts, time will count down.

Turn power on

Check safety key secured to treadmill and clip secured to user clothing

Press START to begin workout

SPEED PROGRAMS:

Once the power switch is turned on and the safety key is secured in place, you may press the

PROGRAM button to choose the pre-set speed program P1, press START key to activate the treadmill. Where user may customize, the default value (or the previous input value) will flash indicating that you may either confirm the value flashing or change the value. Once you have made your data input, press START to activate the treadmill.

Turn power on

Check safety key secured to treadmill and clip secured to user clothing

Press the PROGRAM button once, PI (speed program) will be displayed

Press ENTER to confirm

Use FAST or SLOW buttons to input workout time

Press ENTER to confirm

Use FAST or SLOW buttons to input intensity level based on maximum speed

Press ENTER to confirm, program will begin workout

ELEVATION PROGRAMS:

Once the power witch is turned on and the safety key is secured in place, you may press the

PROGRAM button twice to choose the pre-set elevation program P2. Where user may customize, the default value (or the previous input value) will flash indicating that you may either confirm the value flashing or change the value. Once you have made your data input, press

START to activate the treadmill.

Turn power on

Check safety key secured to treadmill and clip secured to user clothing

Press the PROGRAM button twice, P2 (elevation program) will be displayed

Press ENTER to confirm

Use FAST or SLOW buttons to input workout time

Press ENTER to confirm

Use FAST or SLOW buttons to input intensity level based on maximum elevation

Press ENTER to confirm, program will begin workout

Owner’s Manual

TARGET TRAINING PROGRAMS:

Users have the option to customize workout based on setting training targets for time and distance. Once the power switch is turned on and the safety key is secured in place, you may press the PROGRAM button to choose one of the target program, P3 set training target based on time and P4 set training target based on distance. Where user may customize, the default value (or the previous input value) will flash indicating that you may either confirm the value flashing or change the value. Once you have made your data input, press START to activate the treadmill.

Turn power on

Check safety key secured to treadmill and clip secured to user clothing

Press the PROGRAM button three times for P3 = Target time, or press the program button four times for P4 = Target distance

Press ENTER to confirm

Use FAST and SLOW buttons to input target time or distance

Press ENTER to confirm, program will begin workout

HEART RATE CONTROL PROGRAMS:

Users have the option to customize their heart rate control programs based on their target heart rate value. Once the power switch is turned on, and the safety key is secured in place, you may press the PROGRAM button to select H-SE program, H-S program or H-E program.

Where user may customize, the default value (or the previous input value) will flash indicating that you may either confirm the value flashing or change the value. Once you have made your data input, press START to activate the treadmill.

Treadmill will automatically adjust by elevation or speed or both (depending on which program is chosen) to reach and maintain the user’s target heart rate. During workout, users may still be able to adjust speed or elevation. During workout, time counts down from total time, which is defined as time for workout and cool down.

At the end of the workout, treadmill will automatically go into cool down mode. Cool down mode is pre-set up for 4 minutes. In the first two minutes, speed and elevation will reduce by

50%. The last two minutes, speed will reduce by another 50% and elevation will go to 0%.

To use the heart rate control programs, user must wear wireless transmitter chest strap.

Owner’s Manual

INSTRUCTIONS FOR TARGET

HEART RATE CONTROL PROGRAMS:

Turn power on

Check safety key secured to treadmill and clip secured to user clothing

Press PROGRAM button to select H-SE (HRC by speed and elevation adjustments),

H-S (HRC by speed adjustment only) or H-E (HRC by elevation adjustment only).

Press ENTER to confirm

Use FAST or SLOW buttons to input your age

Press ENTER to confirm

Use FAST or SLOW buttons to input workout time

Press ENTER to confirm

Use FAST or SLOW buttons to input target heart rate

10.

Press START to begin workout

Owner’s Manual

NOTES:

Owner’s Manual

VI. OPERATING THE CONSOLE TX3:

DISPLAY VALUES

ELEVATION (%)

DISTANCE (Miles)

DISTANCE (Km)

SPEED (Miles/H)

XX.X

SPEED (Km/H)TX3 XX.X

TIME XX:XX

0-12

00.1 – 99.0

00.5 – 11.0

0.1

00.8 – 18.0 0.1

00:01 – 99:00 00.01

Pulse indicator

UP – elevation up

DOWN – elevation down

NOTE: Display can be switched between Mile/MPH or Kilometer/Km/H readouts.

See “Unit Conversion” on page 21

Service required indicator

LED dot matrix display window

LCM with backlight message center

FAST – increase speed

SLOW – decrease speed

QUICK START /

START –

two different functions

ENTER - confirm selection or input

PAUSE – press once to pause

STOP – press twice to stop

0 ~ 9 buttons

– preset program selections

– direct speed control during workout

Owner’s Manual

SPEED ADJUSTMENTS:

There are three ways to adjust speed during workout. A single press of the FAST and SLOW buttons will adjust speed by increments of 0.1 MPH (or Km/H), or you may press and hold these buttons to quickly scroll up or down. If the speed adjustment increment is large, it is easier to use the number buttons, which function as direct speed control buttons during the workout.

Another way to adjust speed is to press the extension-keys on the handle bar cover.

Extension-key FAST and SLOW will also adjust speed by increments of 0.1MPH (or Km/H).

Example: to change from 3 MPH to 8 MPH, we could just press the number 8 button once.

Also, we could press and hold the FAST button or extension-key FAST until the speed display shows 8 MPH.

ELEVATION ADJUSTMENTS:

For safety reasons, the elevation level is designed to be manually adjusted for most applications.

The treadmill will only automatically adjust elevation during one of the following three programs: elevation program, HRC adjust by elevation, and fitness test.

Elevation may be adjusted even while the running belt is not moving. However, during the program setup mode, elevation will not be adjustable.

There are two ways to adjust elevation during workout: UP and DOWN on the console, extension-key UP and DOWN on the handle bar cover. The buttons will adjust elevation by increments of 1%.

PULSE FUNCTION:

This treadmill features wireless heart rate monitoring, the most advanced technology to date for accurate read out of your heart rate. For convenience, this treadmill has been designed to pick up heart rate info via the contact sensors located on the +horizontal handlebar. Treadmill will look for wireless pulse signal first. If no wireless pulse signal is present, then treadmill will look for the signal from contact sensors.

To use the wireless pulse monitoring system, you must wear a heart rate transmitter chest strap

(optional). For best results, place the contact surface next to your skin directly under your heart to pick up the pulse signals from your heart. The heart rate transmitter strap is an optional purchase and not included with this treadmill.

Please note that some fibers used in clothes (e.g. polyester, polyamide) create static electricity which may prevent reliable heart rate measurement. Also, note that mobile phone, television

Owner’s Manual

and other electrical appliances form an electro-magnetic field around them, which may also cause problems in heart rate measurement.

PAUSE FUNCTION:

When STOP button is pressed during workout, program is suspended. Message center will flash “WORKOUT PAUSED”. After the running belt has come to a complete stop, dot matrix display window will count down from 3:00. During pause mode, only START and STOP buttons will function.

If START is pressed within three minutes during the pause mode, treadmill will bring the running belt movement back to the speed at which the treadmill was paused. Workout values will resume counting and continue where it was left off.

If STOP is pressed during the pause mode, program will end. After three minutes if no button is pressed, treadmill will automatically end the workout program.

END OF WORKOUT STATS:

When you have completed your workout or if you have ended your workout, the display will report your workout stats. After the running belt has come to a complete stop, the message center will display total time, total distance, total calories and average speed twice. Then the display will go to idle mode, ready for the next user workout setup. If you wish to skip the workout stats report, simply press the STOP button, which will skip display to the idle mode.

UNIT CONVERSION:

To change from metric to English or English to metric, you must be in the idle mode, where the dot matrix window displays a flashing heart. Follow the steps below to make the unit conversion.

Simultaneously press both the STOP and SLOW buttons together.

The message center will show Km to Mi or Mi to Km.

Simply press START to confirm.

Notice that the LED light next to the distance display window on the upper right corner will have changed the measurement unit accordingly.

PRESET PROGRAMS:

QUICK START:

QUICK START

Once the power is on and the safety tether

Once the power switch is turned on, and the safety key is secured in place, simply press the

QUICK START button. Treadmill will activate at 1.0 Km/H. You may increase or decrease

Owner’s Manual

key is secured in place, simply press the START button,

speed or elevation at any time during your workout. To end workout, simply press the STOP button to stop the treadmill. During the workout, time will count up.

Turn power on

Check safety key secured to treadmill and clip secured to user clothing

Press START to begin workout

SPEED PROGRAMS:

Once the power switch is turned on and the safety key is secured in place, you may press the numeric button 0 or 1 to choose one of the two pre-set speed programs, SPEED INTERVAL or

AEROBIC. Message center will prompt user to set up workout duration, and intensity level based on max speed value. Once you have made your selection, press START key to activate the treadmill.

During workout, treadmill will automatically adjust speed according to pre-set program settings.

User may still be able to adjust speed if the preset is not appropriate. The entire remaining program will scale up or down accordingly. During workout, user may adjust elevation level at will. To end workout, simply press the STOP button to stop the treadmill. During workout, time counts down from target workout time.

Turn power on

Check safety key secured to treadmill and clip secured to user clothing

Press 0 for SPEED INTERVAL program or 1 for AEROBIC program

Display will show program selected

Press ENTER to confirm

Use numeric buttons to input workout duration

Press ENTER to confirm

Use numeric buttons to input intensity level based on maximum speed

Press ENTER to confirm

10.

Press START to begin workout

ELEVATION PROGRAMS:

Once the power switch is turned on and the safety key is secured in place, you may press the numeric buttons 2 or 3 to choose one of the two pre-set elevation programs, WEIGHT LOSS or

HILL CLIMB. Message center will prompt user to set up workout duration, and intensity level based on max elevation value. Once you have made your selection, press START key to activate the treadmill.

During workout, treadmill will automatically adjust elevation according to pre-set program setting.

User may still be able to adjust elevation if the preset is not appropriate. The entire remaining program will scale up or down accordingly. During workout, user may adjust speed level at will.

To end workout, simply press the STOP button to stop the treadmill. During workout, time counts down from target workout time.

Turn power on

Owner’s Manual

Check safety key secured to treadmill and clip secured to user clothing

Press 2 for WEIGHT LOSS program or 3 for HILL CLIMB program

Display will show program selected

Press ENTER to confirm

Use numeric buttons to input workout duration

Press ENTER to confirm

Use numeric buttons to input intensity level based on maximum elevation

Press ENTER to confirm

10.

Press START to begin workout

TARGET TRAINING PROGRAMS:

Users have the option to customize workout based on setting training targets for time, distance, or calories. Once the power switch is turned on, and the safety key is secured in place, you may press the numeric button 4 to set training target based on time or 5 to set training target based on distance or 6 to set training target based on calories. Message center will prompt user to set up workout target value. Once you have made your selection, press START key to activate the treadmill.

During workout, users may adjust speed and or elevation at will. To end workout, simply press the stop button to stop the treadmill. During workout, a target training value will be displayed on the dot matrix display window.

Turn power on

Check safety key secured to treadmill and clip secured to user clothing

Press 9 to select fitness test program

Display will show program selected

Press ENTER to confirm

Use numeric buttons to input training target value

Press ENTER to confirm

Press START to begin workout

HEART RATE CONTROL PROGRAMS:

Users have the option to customize their heart rate control programs based on their target heart rate value. Once the power is turned on and the safety key is secured in place, you may press the numeric button 7 to select HRC program adjust by speed or numeric button 8 to select HRC program adjust by elevation. Message center will prompt user to set up workout step-by-step.

Once you have made your selection, press START button to activate the treadmill.

Owner’s Manual

Users also have the option to set up their warm up speed and warm up time. During warm up mode, target heart rate training function will not be in operation.

After the warm up mode, treadmill will automatically adjust by elevation or speed (depending on which program is chosen) to reach and maintain the user’s target heart rate. During workout mode, users may still be able to adjust speed or elevation. During workout, time counts down from the total time, which is defined as time of warm up, workout, and cool down.

At the end of the workout time, treadmill will automatically go into cool down mode. Cool down mode is pre-set up for 4 minutes. In the first two minutes, the speed and elevation will reduce by 50%. The last two minutes, the speed and elevation will reduce by another 50%. To end workout, simply press STOP to stop the treadmill.

To use the heart rate control programs, user must wear a wireless transmitter chest strap.

Signals from the contact heart rate sensors cannot be used in heart rate control programs.

Turn power on

Check safety key secured to treadmill and clip secured to user clothing

Press button “7” to select HRC program adjust by speed OR press button “8” to select HRC program to adjust by elevation.

Display will show program selected

Press ENTER to confirm

Use numeric buttons to input your age

Press ENTER to confirm

Use numeric buttons to input workout time

Press ENTER to confirm

10.

Use numeric buttons to input target heart rate

11.

Press ENTER to confirm

12.

Use numeric buttons to input warm up time

13.

Press ENTER to confirm

14.

Use numeric buttons to input warm up speed

15.

Press ENTER to confirm

16.

Press START to begin workout

FITNESS TEST PROGRAM:

Fitness test is a motivational program designed to determine user’s physical fitness level.

During workout, user will not be able to adjust speed or elevation. The program will increase the workout intensity level. Based on the actual heart rate picked up from the transmitter and the age user input, the treadmill computer will be able to assess user’s physical fit level.

To use the fitness test program, user must wear the wireless transmitter chest strap. If treadmill does not pick up the transmitter heart rate signal, this program will not function.

Owner’s Manual

Turn power on

Check safety key secured to treadmill and clip secured to user clothing

Press 9 to select fitness test program

Display will show program selected

Press ENTER to confirm

Use numeric buttons to input your age

Press ENTER to confirm

Press START to begin workout

VII. EXERCISE TIPS AND GUIDELINES:

STRETCH

CAUTION!

Always consult your physician before beginning any

exercise program.

Stretching prior to exercise will improve flexibility and reduce chances of exercise related injury.

Ease into each of these stretches with a slow gentle motion. Hold for a count of 10. DO NOT bounce. Repeat the stretch exercises again after cool down will help to loosen and relax your muscles to prevent soreness.

WARM UP

The first five minutes of a workout should be devoted to warming up. This warm up will limber your muscles and prepare them for a more strenuous exercise. Warm up on the treadmill by

Owner’s Manual

walking at slow speed.

COOL DOWN

NEVER

stop exercising suddenly. A cool down period of about 5 minutes will allow your heart to re-adjust to the decreased demand. Use a low speed setting during the cool down to gradually lower your heart rate.

HOW OFTEN?

Fitness experts most often recommend, that you exercise at least three to four times a week to maintain cardiovascular fitness. If you have other goals such as weight loss or fat loss, you will achieve your goal faster with more frequent exercise. Whether it is three days or six days, remember that your ultimate goal should be to make exercise a lifetime habit.

HOW LONG?

For aerobic exercise benefits, it’s recommended, that you exercise for about thirty minutes per session. Always start slowly, especially if you have been sedentary during the past year. In the beginning, you may begin with as little as 5 minutes per session. Your body will need time to adjust to the new activity. As your body adjusts, gradually increase your workout time per session.

If your goal is weight loss, a longer exercise session at lower intensities is most effective. A workout time of 45-50 minutes or more is recommended for best weight loss results.

Owner’s Manual

CAUTION!

For your health and safety, DO NOT over exert yourself.

CAUTION!

HOW HARD?

How hard you work out is determined by your goal. Regardless of your fitness goals, always begin an exercise program at low intensity. Aerobic exercise does not have to be painful to be beneficial !

There are two ways to measure your exercise intensity. The first is by evaluating your perceived exertion level and the second is by monitoring your heart rate.

If you experience chest pains, nausea,

During exercise, if you cannot maintain a conversation without gasping, you are working too hard.

dizziness or shortness of breath, STOP

A good rule of thumb is to work to the point of exhilaration, not exhaustion. If you cannot catch your breath, it is time to slow down. Always be aware of other warning signs of overexertion.

exercising immediately and consult your

To monitor your heart rate you can use a pulse monitor or take your pulse with your fingers.

physician before

Pulse monitors are convenient tools for monitoring your heart rate. However, these values are for

continuing. reference only. You should always listen to your body first.

You can measure your pulse with your fingers by placing your first two fingers lightly over the blood vessel (carotid artery) on your neck located next to your Adam’s apple. Count your pulse for ten

TARGET HEART RATE

seconds and multiply by six. This figure is your heart rate in beats per minute. Compare this number to the Target Heart rate zone for your age group.

Age Target Zone

( 60% - 75% )

CALCULATING YOUR TARGET HEART RATE ZONE

20 120 - 150

25 117 - 146

30 114 - 142

35 111 - 138

40 108 - 135

45 105 - 131

50 102 - 127

55 99 - 123

60 96 - 120

65 93 - 116

70 90 - 113

The most common method for calculating your target heart rate is to first determine your maximum heart rate. The standard formula is: 220 - your age = maximum heart rate.

You DO NOT want to work out at your maximum heart rate. Instead, you should work out in your target heart rate zone. Your target heart rate zone is a percentage of your maximum heart rate. The AHA (American Heart Association) recommends working out at a target heart rate zone of between 60% - 75% of your maximum heart rate. If you are just beginning a program, exercise near or below the lower limit of your target zone.

Lower limit of target zone = maximum heart rate x 0.60

Upper limit of target zone = maximum heart rate x 0.75

Maximum heart rate (for user age 30) = 220 – 30 = 190

60% of max HR = 190 x .60 = 114

75% of max HR = 190 x .75 = 142

If you have not been exercising on a regular basis, it is recommended that you start slower. It may be advised that you use 114 to begin as your target heart rate. If you find this pace too difficult to maintain, go to a lower target heart rate. As you become stronger, you may want to increase your target heart rate.

VIII. MAINTENANCE:

Owner’s Manual

CLEANING

DANGER!

Remove dust on the treadmill with vacuum or slightly damp cloth. Fold up the deck and clean

To reduce the risk of

the floor with vacuum periodically will help to prolong the treadmill product life.

electrical shock, always unplug the treadmill

NEVER use solvents on the deck or running belt. Use of solvents can reduce critical lubrication of the deck and belt.

immediately after use and before cleaning.

RUNNING BELT CENTERING ADJUSTMENT:

When you run or walk, you may push off harder with one foot than the other. This will cause the running belt to run off center. This treadmill is designed and built to ensure proper tracking of the belt is always centered on the deck. Occasionally the belt may need further adjustment to keep it centered. To center the belt, use the enclosed Allen wrench to adjust the rear roller position.

BELT CENTERING PROCEDURES:

DO NOT wear loose clothing, neckties or loose jewelry while making this adjustment.

NEVER turn the bolt more than 1/4 turn at a time.

Always tighten one side and loosen the other to prevent over tightening or over loosening the belt.

Run the treadmill. Adjust belt while the treadmill is running at 4 Mi/H (6.4 Km/H) with no person on the belt.

After making the adjustment, walk on the belt for five minutes to test. If necessary, repeat the procedure but NEVER turn the bolts more than 1/4 turn at a time. Over tightening the belt can significantly shorten the belt life.

IF BELT TOO FAR TO THE LEFT SIDE:

Turn the left roller bolt 1/4 turn clockwise (tighten)

Turn the right roller bolt 1/4 turn counterclockwise (loosen)

IF BELT TOO FAR TO THE RIGHT SIDE:

1. Turn the right roller bolt 1/4 turn clockwise (tighten)

2. Turn the left roller bolt 1/4 turn counterclockwise (loosen)

RUNNING BELT TENSIONING ADJUSTMENT:

CAUTION!

Over tightening of the

slipping across the rollers. All belts will stretch over time. This is a normal and common

belt will severely shorten

If you place your feet on the belt and feel a slipping sensation, then the belt has stretched and is

Owner’s Manual

may cause further damage to other components.

adjustment on any treadmill. To eliminate this slipping, tension both Allen bolts on the rear roller

1/4 turn. Try the treadmill again to check for slipping. Repeat if necessary, but NEVER turn the roller bolts more than 1/4 turn at a time.

DRIVE BELT TENSIONING ADJUSTMENT:

If you have tensioned the running belt and are still experiencing a slipping sensation, call your dealer. Only an authorized dealer should perform tensioning of the drive belt.

LUBRICATING THE DECK:

A well-lubricated deck will ensure high performance of your treadmill and reduce the level of normal wear and tear to important components. This treadmill has been pre-lubricated at the factory. However, for optimal performance, the running deck may require periodic lubrication.

With average usage (30 minute workout at 5-6 Km/H 3 times a week for two people) lubricate every six months. You may adjust the timing of the lubrication based on the intensity of the treadmill use level.

To check the lubrication level, simply lift the running belt, and put your hand as far into the center of the belt as you can reach. If your hand shows signs of silicone, then it does not need additional lubrication. If the board feels dry and there is very little evidence of silicone on your hand, then additional lubrication is necessary.

TO LUBRICATE THE DECK:

Stop running belt so that the seam is located on top and in the center of the deck.

Insert extending tube nozzle into spray head of lubricant can.

Lift running belt.

Position nozzle between the belt and the deck board approximately 200mm (8”) from the front of the treadmill.

Apply the silicon from the front to the rear of the treadmill on each side of the treadmill. Try to reach the spray as far into the center of the running deck as possible. A light coating of silicone spray should be applied to the deck under the belt on each side. Be certain the center of the walking area gets lubricated.

Spread the silicon by running the treadmill at 1 Km/H and step gently on the belt from left to right. Do that for a few minutes and allow the silicon to soak into the belt.

Owner’s Manual

IX. TROUBLE SHOOTING:

WHEN TO CALL FOR HELP

This treadmill has been designed with user safety as the number one priority. In the event of electrical failure, the treadmill will shut off automatically to prevent user injury and to prevent damage to expensive components such as the motor.

When you encounter unusual behavior from the treadmill, simply go to the front of the treadmill and turn the power switch off and on to reset the treadmill. This should clear incidental errors and ready the treadmill for normal operation again.

If you have reset the treadmill by turning the power switch off and on again, and the treadmill is still not operational, then it is time to call your dealer for service.

TROUBLE SHOOTING GUIDE

Treadmill will not start

Running belt slips

Running belt hesitates when stepped on

Running belt is off centered

Not plugged in

Safety tether key not inserted

Plug into grounded outlet.

Insert safety tether key into console.

House circuit breaker tripped 3.

Reset or replace fuse.

Treadmill circuit breaker tripped 4.

Lubricate treadmill deck and

Switch on OFF reset.

Turn switch to ON

Running belt not tight enough

Drive belt not tight enough

Adjust running belt tension

Adjust drive belt tension

Insufficient lubrication 1.

Apply silicone lubricant between

Belt and deck

Running belt too tight 2.

Adjust running belt tension

Running belt tension not even across Center the running belt the rear roller

Owner’s Manual

X. PART DESCRIPTION:

Owner’s Manual

XI. ASSEMBLY DESCRIPTION:

Owner’s Manual

STEP 3 Assemble Console

1. Insert console cable/cables #14 and #18 through the holes on the console base before setting the console on the base.

2 Secure and tighten console in place with two screws #7, M8x30mm and two flat washers #1.

3. Connect console cable #14 to upright cable #13

4. Also connect contact HR cables #18 to #19 together the

5. For model TX3 only: Connect extension key cables #16 to #17 and #17 to #15 together on both sides of the console from the bottom.

Owner’s Manual

STEP 4 Assemble handle bar

1. Insert handle bars into the console base.

2. Secure each handle bar to the console base with two screws #6, M8x15 and two star washers #10.

3. For model TX3 only: Insert fixing cover onto bottom of handle bar and secure them to the upright post with one screw #9, M8x55 and one star washer #10.

4. Tighten all screws after they are in position.

Owner’s Manual

XII. LIMITED WARRANTY

THERE ARE NO WARRANTIES, EXPRESSED OR IMPLIED, MADE BY EITHER THE DISTRIBUTOR OR THE MANUFACTURER ON VERSO by

KETTLER PRODUCTS, EXCEPT THE MANUFACTURER’S LIMITED WARRANTY AGAINST DEFECTS IN MATERIAL SET OUT BELOW:

This VERSO by KETTLER™ Limited Warranty applies to products sold through the VERSO by KETTLER™ Authorized Dealer Network to the original retail purchaser and authenticated by proof of purchase from a retailer located in the United States. Any shipments made under this warranty will be shipped to the United States only. Any shipment outside of the United States will be at the sole cost of the customer. This VERSO by KETTLER™ Limited Warranty is a manufacturer’s warranty and is not changed or modified by additional warranties extended by individual retailers at the point of sale. Manufacturer warrants this product to be free from defects in material at the time of the product’s tender of delivery for a period of 1 year for electronic components, 3 years for non-electronic components, and 6 years on the motor for residential use only. This Limited Warranty is not transferable and does not cover normal wear and tear (including, but not limited to, damage and wear to power shocks, drive belts, and other non-durable parts). The liability of the manufacturer under this Limited Warranty shall not include any liability for direct, indirect, or consequential damages resulting from the defect. This Limited Warranty is

void if the product is damaged by accident, unreasonable use, improper service, failure to follow instructions provided, modification from its

original state, or other causes determined not arising out of defects in material.

This warranty gives you specific legal rights. Should this product become defective due to material within the warranty period, contact VERSO by

KETTLER™ and KETTLER® Parts & Service Dept. by phone at 866.804.0440, fax at 757.563.9273, or e-mail at [email protected]

THIS LIMITED WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND OF ANY OTHER OBLIGATIONS OR LIABILITY ON THE

PART OF THE MANUFACTURER. KETTLER NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER

LIABILITY IN CONNECTION WITH SUCH PRODUCTS.

KETTLER

Parts & Service Department: 866.804.0440 Fax at 757.563.9273 Email at [email protected]

Owner’s Manual

ITEM

XIII. TX1 110V / 230V Part List

DESCRIPTION PART # QTY.

Motor, incline, 230V

Motor, incline, 110V

Shaft, fixing

Screw, hex, special

Sleeve, frame, H

Sleeve, gas shock

Cylinder, hybrid

Cap, frame, H

Sleeve, fixing, frame, base

9 Cardboard, frame, base

Foot, front, frame, base

Jacket, cable, frame, base

12 Foot, adjustable

Cover, fix, wheel, front, R

Cover, fix, wheel, front, L

Wheel, moving

Bushing, wheel

Coating, frame, base

Coating, incline

Bushing, tube, connection

Slider, track

Cap, pin, lock

Assy, cable, pin, lock

Rubber

Bracket, stopper, side landing

Bushing, snap

Sleeve, pin, lock

Foot, frame, main

Guard, deck

Cap, frame, main, rear, btm, R

Landing, side

Cap, frame, main, rear, top, L

Cap, frame, main, rear, btm, L

Cap, frame, main, rear, top, R

Bracket, pin, lock

Spring, pin, lock

Lever, release

S004679

S005238

M004198

M001447

M004212

M004220

M005925

M004246

M004244

O006519

M004264

M004939

M004614

M004263

M004254

M003823

M004936

S006094

S006096

M001406

M004940

M005770

S006126

M001821

M004184

M005376

M001438

M004175

M004180

M005361

M007138

M007136

M007139

M007140

M007137

M004187

M004193

M005886

Haft, release M005887

Owner’s Manual

ITEM DESCRIPTION PART # QTY.

39 Bushing, wheel, rear

40 Inlet, AC

Switch, power

42 Breaker, circuit, 230V

Breaker, circuit, 110V

43 Controller, 230V

Controller, 110V

44 Belt, drive

45 Cushion, deck

Belt, running

47 Roller, rear

Deck

49 Coating, frame, main

50 Roller, front

51 Coating, upright, L

52 Coating, upright, R

53 Bar, handle

54 Sleeve, shaft

Wheel, incline

56 Bushing, fix, frame, base

Coating, frame, H, R

58 Coating, frame, H, L

59 Weldment, bracket, motor

60 Sensor, speed, w/ cable

61 Motor, 230V

Motor, 110V

62 Cover, bar, handle, btm, R

Cover, bar, handle, top, L

64 Cover, bar, handle, btm, L

65 Cover, bar, handle, top, R

66 Coating, bracket, console

67 Assy Console

68 Assy, bar, horizontal

69 Cover, base, console

Cover, motor

71 Cap, handlebar end

Key, safety

73 Filter 230V only

74 Choke 230V only

75 Cable, signal, frame, main 1920mm

76 Cable, signal, upright 1230mm

Signal cable+ ferrite core 465mm

78 Signal cable, Hand pulse PCB(6P) 390mm

Owner’s Manual

M007145

M007142

M007143

M007144

S006273

S006899

S006270

M007148

M007141

M004294

S005017

S004850

M004158

M004259

M004262

M003907

M004743

M004183

M003150

M006157

M005689

M003149

S006089

S006114

M001688

M001557

M003833

S004663

M004952

S006099

S005417

S006274

S006275

S006277

M004129

M005931

M004942

S006211

S006202

S005514

S006867

M002627

M002628

Owner’s Manual

ITEM

XIV. TX3 110V / 230V Part List

DESCRIPTION PART # QTY.

1 Shaft, fixing

2 Screw, hex, special

3 Sleeve, frame, H

4 Sleeve, gas shock

5 Cylinder, hybrid

6 Sleeve, fixing, frame, base

7 Cap, frame, H

8 Foot, front, frame, base

9 Jacket, cable, frame, base

10 Foot, adjustable

11 Cover, fix, wheel, front, R

12 Bushing, wheel

13 Cover, fix, wheel, front, L

M004198

M001447

M004212

M004220

M005925

M004244

M004246

M004264

M004939

M004614

M004263

M004936

M004254

14 Wheel, moving

15 Coating, frame, base

16 Coating, incline

17 Bushing, tube, connection

18 Slider, track

19 Cover, fixing, bar, handle

20 Coating, upright, L

21 Coating, upright, R

22 Cap, pin, lock

23 Cover, back

24 Assy, cable, pin, lock

25 Cover, motor

26 Signal cable+ ferrite core 465mm

27 Key, safety

28 Sleeve, pin, lock

29 Foot, frame, main

30 Guard, deck

31 Landing, side

32 Cap, frame, main, rear, top, L

33 Cap, frame, main, rear, btm, L

34 Cap, frame, main, rear, top, R

35 Cap, frame, main, rear, btm, R

36 Spring, pin, lock

37 Lever, release

38 Haft, release

39 Bracket, pin, lock M004187 1

Owner’s Manual

M003823

S006094

S006096

M001406

M004940

M007171

S006283

S006284

M005770

M005830

S006126

M007141

M003907

S005017

M004175

M004180

M005361

M007136

M007139

M007140

M007137

M007138

M004193

M005886

M005887

ITEM DESCRIPTION PART # QTY.

40 Bushing, wheel, rear

41 Inlet, AC

42 Switch, power

43 Breaker, circuit, 230V

Breaker, circuit, 110V

44 Controller, 230V

Controller, 110V

45 Filter 230V only

46 Choke 230V only

47 Belt, drive

48 Roller, front

49 Cushion, deck

50 Belt, running

51 Roller, rear

52 Deck

53 Coating, frame, main

54 Weldment, bracket, motor

55 Sensor, speed, w/ cable

56 Motor, 2HP 230V

Motor, 2HP 110V

57 Assy, bar, horizontal

58 Bar, handle

59 Assy Console

60 Cover, bar, handle, btm, L

61 Cover, bar, handle, top, R

62 Cover, bar, handle, btm, R

63 Cover, bar, handle, top, L

64 Cover, base, console

65 Coating, bracket, console

66 Signal cable, Hand pulse PCB(6P) 390mm

67 Motor, incline, 230V

Motor, incline, 110V

68 Bushing, fix, frame, base

69 Coating, frame, H, L

70 Wheel, incline

71 Sleeve, shaft

72 Coating, frame, H, R

73 Cable, signal, upright 1230mm

M004183

M003150

M006157

M005689

M003149

S006691

S006719

S004850

M004158

M001688

S005417

M001557

M003833

S004663

M004952

S006099

S005514

S006867

M005404

M006801

S006270

S006286

S006961

M007142

M007144

M007145

M007143

M007148

S006273

M004743

S004679

S005238

M004942

S006202

M005931

M004129

S006211

M004262

74 Cable, signal, frame, main 1920mm M004259

75 Decal,Motor ,cover O007001

76 Board, HR, contact M005905

Owner’s Manual

سلام! من یک ربات چت هوش مصنوعی هستم که به طور خاص برای کمک به شما در مورد Kettler VERSO TX1 آموزش دیده‌ام. من سند را به طور کامل بررسی کرده‌ام و می‌توانم به شما کمک کنم اطلاعات دقیقی را که نیاز دارید پیدا کنید یا محتوا را به زبان ساده و واضح توضیح دهم. چه به دنبال راهنمایی در مورد ویژگی‌های خاص، مراحل عیب‌یابی یا استفاده عمومی باشید، می‌توانید سوالات خود را بپرسید. هرچه جزئیات بیشتری در مورد نگرانی‌ها یا نیازهای خود ارائه دهید، من می‌توانم دقیق‌تر و موثرتر به شما کمک کنم!

دستیار در حال تایپ

دستیار از صفحه کلید خارج شده است. لطفا بعدا دوباره امتحان کنید.

به نظر می‌رسد به سندی رسیده‌اید که به چندین زبان نوشته شده است، از جمله زبانی که زبان مادری شما نیست. می‌توانید از پیوندهای زیر برای پنهان کردن موقت صفحاتی که زبان مورد نظر شما را ندارند استفاده کنید.

تبلیغات

VERSO by Kettler™

TX1

TX3

Foldable Treadmill Owner’s Manual

KETTLER International Inc.

1355 London Bridge Rd.

Virginia Beach, VA 23453

Office Phone: 757-427-2400

Office Fax: 757-427-0183

Email: [email protected]

Parts & Service Department:

Phone: 866-804-0440

Email: [email protected]

TX1 INTRODUCTION:

KEY FEATURES:

TX3 INTRODUCTION:

KEY FEATURES:

SPECIAL FEATURES:

Model #

Special features

TX3

TABLE OF CONTENTS:

PRECAUTIONS

YOUR

YOUR

IV. OPERATING THE TREADMILL

V. OPERATING THE CONSOLE TX1

VI. OPERATING THE CONSOLE TX3

AND

VIII. MAINTENANCE

SHOOTING

X. PART

XI.

XII.

ASSEMBLY INSTRUCTION……………………………………….……

WARRANTY

XIII.

XIV.

TX1 110V / 230V PART LIST………………………………………………….

TX3 110V / 230V PART LIST …………………………………………..………

I

IMPORTANT SAFETY PRECAUTIONS:

GROUNDING INSTRUCTIONS

ELECTRICAL SAFETY

MECHANICAL SAFETY

APPROPRIATE ATTIRE

CHILDREN AND PETS

II. SETTING UP YOUR TREADMILL:

PLACEMENT IN YOUR HOME

LEVELING THE BASE

USE DEDICATED CIRCUIT

III. HANDLING YOUR TREADMILL:

FOLDING THE TREADMILL

UNFOLDING THE TREADMILL

MOVING THE TREADMILL

STORING THE TREADMILL

IV. OPERATING THE TREADMILL:

TURN POWER ON

SAFETY TETHER KEY AND CLIP

GETTING ON AND OFF THE TREADMILL

V.

OPERATING THE CONSOLE TX1:

DISPLAY VALUES

UP – elevation up

DOWN – elevation down

FAST – increase speed

SLOW – decrease speed

QUICK START /

PROGRAM – program selection

VIEW – pulse or calories display selection

SCAN – display both interchangeably

COOL DOWN

PAUSE – press once to pause

STOP – press twice to stop

SPEED ADJUSTMENTS

ELEVATION ADJUSTMENTS

PULSE FUNCTION

PAUSE FUNCTION

END OF WORKOUT STATS

UNIT CONVERSION