KitchenAid 9871915A Use & care guide
Add to My manuals12 Pages
KitchenAid 9871915A is a compact and powerful trash compactor designed to reduce the volume of household waste. It features a convenient WHISPER QUIET operation for noise reduction, making it ideal for use in kitchens or other living areas without disturbing the peace. The compactor includes a charcoal air filter to neutralize odors, ensuring a fresh and clean environment. It's equipped with safety features such as a lock key switch to prevent unauthorized use, especially important in households with children.
advertisement
▼
Scroll to page 2
of
12
INTEGRATED COMPACTORS Use & Care Guide For questions about features, operation/performance, parts, accessories or service, call: 1-800-422-1230 In Canada, call for assistance 1-800-461-5681, for installation and service, call: 1-800-807-6777 or visit our website at... www.kitchenaid.com or www.kitchenaid.ca Table of Contents............................................................................................................ 2 9871915A TABLE OF CONTENTS COMPACTOR SAFETY ..................................................................3 INSTALLATION INSTRUCTIONS ..................................................4 Unpacking ....................................................................................4 Location Requirements ................................................................4 Electrical Requirements ...............................................................5 Undercounter Installation.............................................................5 COMPACTOR USE.........................................................................7 How Your Compactor Works.......................................................7 Loading.........................................................................................8 WHISPER QUIET™ ........................................................................8 Starting Your Compactor.............................................................8 Using Solid (Locked) Cycle ..........................................................8 Using the Filter .............................................................................8 Removing a Filled Bag .................................................................8 Installing a New Bag ....................................................................9 COMPACTOR CARE......................................................................9 Changing the Charcoal Air Filter..................................................9 Cleaning........................................................................................9 TROUBLESHOOTING ..................................................................10 ASSISTANCE OR SERVICE.........................................................11 Accessories ................................................................................11 WARRANTY ..................................................................................12 2 COMPACTOR SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean: You can be killed or seriously injured if you don't immediately follow instructions. You can be killed or seriously injured if you don't follow instructions. All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed. IMPORTANT SAFETY INSTRUCTIONS WARNING: When using an electrical appliance, basic precautions should always be followed, including the following: ■ Read all instructions before using the compactor. ■ Close supervision is necessary when used by or near children. Do not allow to be used as a toy, or to run unattended at any time. Lock Key Switch when not in use and store key out of reach of children. ■ Do not touch moving parts. ■ Do not operate with a damaged cord set, plug, motor, or after damage in any manner. Have the compactor examined, repaired or adjusted by an authorized serviceperson. ■ Use only for intended use as described in this manual. Do not use other than manufacturer's recommended attachments. ■ Do not compact toxic or volatile flammable material such as oily rags and insect sprays. Do not compact lighted cigarettes, cigars, or other hot or burning items. Do not overload the compactor. ■ Do not take apart the compactor. Incorrect reassembly can cause electric shock when subsequently used. ■ Handle a loaded trash bag with care. Sharp objects can pierce the bag and cause injury. Do not overload trash bag with heavy material such as glass. ■ This compactor is intended for household use only. SAVE THESE INSTRUCTIONS 3 INSTALLATION INSTRUCTIONS Installer: Leave Use and Care Guide with the homeowner. Homeowner: Keep Use & Care Guide for future reference and for local electrical inspector’s use, if required. 4. Place the other 2 corner posts on the floor to the side of the compactor. Grasp the sides of the compactor cabinet and put compactor on its side on top of the corner posts. Remove the shipping base from the bottom of the compactor. Unpacking WARNING Excessive Weight Hazard Use two or more people to move and install compactor. A B Failure to do so can result in back or other injury. A. Leveling legs B. Shipping base IMPORTANT: ■ Do not grasp console to move compactor. ■ Begin in the room where the compactor will be located. 1. Remove compactor from shipping carton. Remove all protective packaging materials such as tape and shipping pads. Use a mild detergent and warm water to remove waxy residue caused by protective shipping material. Dry thoroughly with a soft cloth. For more information, see “Cleaning.” 2. Check to be sure the power cord is attached to the cord clip on the rear of the compactor. Location Requirements Product Dimensions A 34¹⁄₈" (86.7 cm) A. Cord clip 3. Place the 2 corner posts from the carton on the floor near the compactor. Open the compactor drawer and remove any shipping materials or other items from the drawer. Do not remove the compactor bag. Grasp the handle and raise the front of drawer until it clears the drawer stops. Grasp sides of drawer and lift drawer out of compactor. Place the drawer on the 2 corner posts. 4 15" (38.1 cm) 24" (61 cm) Cutout Dimensions Electrical Requirements WARNING 3" (7.6 cm) A 34¹⁄₄" min. (87 cm) 24" min. (61 cm) Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. 18" min. (45.7 cm) Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 15¹⁄₄" min. (38.7 cm) Recommended Grounding Method A. Grounded eletrical outlet must be a minimum of 3" (7.6 cm) away from surrounding cabinets or nearby walls as shown. It can be placed either to the left or the right side of the compactor. This compactor is for use on a single phase, 115-volt, 60 Hz, AC only 15- or 20-amp fused and properly grounded circuit and is equipped with a grounding plug as shown below. It is recommended that a separate circuit serving only this appliance be provided. Clearance Dimensions This compactor must be grounded while in use to reduce the risk of electric shock. The compactor is equipped with a threeconductor cord and 3 prong grounding-type plug to fit the proper grounding-type receptacle. The green (or green and yellow) conductor in the cord is the grounding wire. Never connect the green (or green and yellow) wire to a live terminal. B Undercounter Installation A A. Leave 6" (15.2 cm) of clearance space to the right side of the compactor in order to remove the compactor bags. B. Leave 23" (58.4 cm) of clearance in front of the compactor in order to fully open or remove the compactor drawer. NOTE: Proper installation is your responsibility. Make sure you have everything necessary for correct installation. It is the personal responsibility and obligation of the customer to contact a qualified installer to assure that electrical installation meets all National and Local codes and ordinances. Tools and materials needed for installation: ■ Level ■ Phillips No. 2 screwdriver ■ Tape measure ■ Flat-blade screwdriver ■ Pliers ■ ⁵⁄₁₆" Hex-head socket wrench ■ Scissors ■ Utility knife IMPORTANT: ■ Do not grasp control panel to move compactor. ■ Slide compactor onto cardboard or hardboard before moving compactor across floor to prevent floor covering damage. ■ Do not allow the rear frame of the compactor to touch the floor covering when lifting or moving compactor. 5 ■ Undercounter Installation If the compactor is to be midway between “1” and “3,” place the retaining bracket screws through “2.” A B NOTE: Installation hardware is not provided with full cabinet models. 1. Measure the height of your cabinet opening. The top of the compactor should be at least ¹₈" (3 mm) from the top of the cabinet opening. The rear wheels are preset for a cabinet opening height of 34¹⁄₄" (87 cm) (Position 1). 3 2 1 To adjust for other cabinet opening heights: ■ Loosen self-tapping screw just enough to clear stud from hole in position “1.” ■ Move the rear wheel and stud to position “2” or “3” as needed for your cabinet opening measurement: Position 2: 34¹⁄₄" to 34⁷⁄₁₆" (87 to 87.5 cm) Position 3: 34⁷⁄₁₆" to 34⁵⁄₈" (87.5 to 88 cm) ■ NOTE: To level the unit in position 3, you may need to add shims under the leveling legs. Tighten screw. Repeat for other rear wheel. B C 1 2 3 A. Countertop B. Retaining bracket 7. Carefully lift the front slightly and roll compactor into the cabinet opening. Using the two #8-18 x ¹₂" screws, fasten the retaining brackets to the countertop with the mounting screws. If brackets cannot be attached to the underside of countertop, attach mounting clips to brackets. Fasten compactor to cabinet front with mounting screws through mounting clips. Countertop mounting A A B D A. Wheel bracket assembly B. Cabine C. Locating stud D. Self-tapping screw (pivot) 2. Use pliers to lower leveling legs away from cabinet. Adjust legs so there will be a ¹⁄₈" (3 mm) to ¹₄" (6.4 mm) space between the top of the compactor and the top of the cabinet opening. Stand the compactor upright. 3. For model with cabinet, remove the plastic plugs from the compactor cabinet top. 4. Move the compactor close to its final position. 5. Plug into a grounded 3 prong outlet. 6. Determine if you want the compactor frame or drawer front flush with the cabinet front. Using the two #8-18 x ⁵₁₆" screws, install the retaining brackets to cabinet top as needed: ■ If the compactor frame is to be flush with the cabinet front, place retaining bracket screws through “1.” ■ If the compactor drawer front is to be flush with the cabinet front, place retaining bracket screws through “3.” C A. Countertop B. Retaining bracket C. Mounting screw Cabinet-front mounting A C B D A. Mounting clip B. Cabinet C. Retaining bracket D. Mounting screw 8. Grasp sides of compactor drawer and place bottom of drawer into tracks. Lift at the handle so drawer will go over drawer stops. Close drawer. Check to see if drawer opens freely. If the toe plate rubs against floor, see “Adjusting the Toe Plate” for further instructions. 6 3. Attach a 15" x ¹⁄₂" quarter-round filler along the top of the drawer front using glue or screws. Adjusting the Toe Plate If the toe plate rubs the floor covering, the toe plate clearance may be changed as follows: 1. Mark on each side of the toe plate the amount of toe plate that rubs the floor covering. 2. Remove the drawer from the unit. (See Step 3 in the “Unpacking” section.) 3. Use a ruler and a pencil or chalk to draw a line between the marks on each side of toe plate. 4. Use scissors or utility knife to cut toe plate along line. 5. Replace drawer. If toe plate still rubs floor covering, repeat Steps 1-4. B A C C Trimless Panel without Handle Dimensions Use these dimension drawings to create a custom panel for use without a trim kit. The panel should be a minimum of ¹⁄₂" (13 mm) thick. D E F A. Custom panel B. 15"x ¹⁄₂ " Quarter-round C. #8 x 1" Wood screws D. Toe guard E. Washer F. Toe guard screw 29 ³⁄₈" (74.6 cm) COMPACTOR USE How Your Compactor Works 15" (38.1 cm) Installation 1. Align the bottom of the custom panel with the bottom of the drawer front. NOTE: The bottom of the custom panel should not extend below the bottom of the drawer front. 2. Secure the panel from the back using four #8 x 1" wood screws as shown. The compacting ram is the part of the compactor which compresses the trash. The compacting ram does not go to the bottom of the drawer. You will not see compacting of trash the first few times you load the compactor. NOTE: The compactor drawer should be more than ¹⁄₂ full before the compactor can begin to compress the load. You may hear a noise when glass breaks. Strong glass bottles may not break at all. The trash in a full compactor bag will be about ¹⁄₄ the size of its original bulk. Load bulky trash, bottles, and cans in the center of the drawer. Bottles or cans not placed in the center may become caught between the ram and the drawer. The Drawer Monitor Switch then senses a “misload” and causes the ram to return to the “up” position without compacting. 7 Loading IMPORTANT: Do not push items down into compactor with hands or feet. NOTE: You will not see compacting of trash the first few times you load the compactor. The compactor drawer should be about ¹⁄₂ full before the compactor can begin to compress the load. 1. Open the drawer. Lift and pull the handle or press the foot pedal to open the drawer. NOTE: Pressing the foot pedal opens the container only 3" to 6" (7.6 cm to 15.2 cm), depending on the load. Using Solid (Locked) Cycle The Solid (Locked) Cycle extends the use of the bag by putting constant pressure on the trash to keep it from springing back. Regular use of solid cycle can increase bag capacity up to 25 percent. During Solid Cycle, the ram will stay in the down position for extra compacting. The drawer is locked and cannot be opened when the ram is down. For best results, use the Solid Cycle for at least 30 minutes at a time. 1. Open container. Load trash. 2. Set compactor Solid Cycle switch to ON. 2. Place trash in compactor. ■ Wrap or cover wet or messy trash. ■ Do not compact items that may develop offensive odors such as raw meat, fish, grapefruit rinds, disposable diapers, or personal hygiene items. ■ Load bottles or cans on their sides in the center of the drawer. Do not load bottles in an upright position. 3. Close container. 4. Lift the foot pedal UP to START cycle. 5. Container remains LOCKED untill you RESET by lifting the foot pedal UP. Using the Filter 1. Set the Air Filter switch to ON. The fan creates air movement in the compactor for odor removal. NOTE: The Charcoal Air Flter works only when the Key-Knob is in the ON position. 2. Set the Air Filter switch to OFF to turn off the fan. 3. Close the drawer. The WHISPER QUIET™ System helps to maintain a quiet home environment during compactor operation. NOTE: The contents of the trash may effect the noise level of your compactor. See “Compactor Use.” Starting Your Compactor 1. 2. 3. 4. 5. 8 Open container. Load trash. Leave Key-Knob in ON position. Set Solid Cycle switch to OFF. Close container. Lift foot pedal UP to START cycle. Removing a Filled Bag When the trash is compacted to the top of the drawer, remove the bag. If the bag is too heavy, compact less trash before emptying it in the future. IMPORTANT: Do not push items down into compactor with hands or feet. 1. Pull the drawer completely open. 2. Remove top of bag from bag retainer buttons. Pull up all four bag cuffs. Close bag with twist tie provided. 3. Push Side-Lock Latch down and tilt drawer side open. COMPACTOR CARE Your new compactor is designed to give you many years of dependable service. However, there are a few things you are expected to do in order to properly maintain your compactor. This section will tell you how to clean and care for your compactor. 4. Lift out bag. Changing the Charcoal Air Filter To order the correct replacement charcoal filters call the toll-free number listed on the cover or in the “Assistance or Service” section. 1. Insert fingertips in the Air Filter Cover and pull until the side tabs release. Then, lift the cover to release the bottom tabs. Installing a New Bag Do not use any kind of bag other than those designed especially for use in your compactor. Order replacement compactor bags through your local dealer or by calling the toll-free number on the cover or in the “Assistance or Service” section. IMPORTANT: Before installing a new bag, be sure: ■ The drawer side is securely locked. ■ 2. Remove the Air Filter by pulling the top edge of the filter. The filter should pull out easily. Throw away used filter. The container is clean and free of debris. 1. Place folded bag into the drawer. Open bag and pull top edges over the drawer top. 3. To replace, push the replacement filter into place. Insert the bottom tabs of the Air Filter Cover and push in until the side tabs snap into place. Cleaning Before cleaning the compactor, turn the Key-Knob (or KeySwitch) to the OFF & LOCK position and remove it. NOTE: Any services other than those outlined in this section should be performed by a designated service representative. 2. Lock bag in place by pulling the four prepunched holes over the bag retainer buttons. Holes will expand over the buttons without damaging the bag. 3. Press inside of bag against the drawer bottom, sides and corners for a smooth fit. Cleaning Exterior Surfaces 1. Wash exterior surfaces (including stainless steel) with a clean sponge or soft cloth and a mild detergent in warm water. Do not use abrasive or harsh cleaners. Rinse and dry thoroughly with a soft cloth. 2. Wipe up spills right away. Some foods can damage the finish if left on the compactor surface. Cleaning Inside the Drawer NOTE: You may want to wear protective gloves as there may be bits of glass in the drawer. 1. Remove the bag. See the “Removing a Filled Bag.” 2. Press down on the lever-action lock (or Side-Lock latch). 9 3. Hold the lever-action lock down and tilt the side of the drawer out until the lock clears the drawer front. NOTE: If desired, the drawer side can be removed by tilting it up, then lifting it out. 5. Wash the inside of the cabinet with a clean sponge or soft cloth and a mild detergent in warm water. Rinse and dry thoroughly with a soft cloth. 6. To replace the drawer, grasp it by the sides and insert the rollers onto the tracks. 7. Lift the front of the drawer and push it in fully past the stops. Cleaning the Ram 4. Wash the interior of the drawer with a clean sponge or soft cloth and a mild detergent in warm water. Rinse and dry thoroughly with a soft cloth. 5. If the drawer side was removed, slide it back into the tilted position. 6. Press the lever-action lock (or Side-Lock Latch) down while pushing the drawer side to the upright position. 7. Latch the drawer side by pushing up the lever-action lock (or Side-Lock Latch). NOTE: You may want to wear protective gloves as there may be bits of glass on the ram cover. 1. Wipe glass particles off of the ram cover with a cloth or paper towels. 2. Remove foods with a clean sponge or soft cloth and a mild detergent in warm water. Rinse and dry thoroughly with a soft cloth. Cleaning Inside the Cabinet NOTE: You may want to wear protective gloves as there may be bits of glass in the cabinet. 1. Pull the drawer out until it stops. NOTE: Look to see how the drawer rollers move in the tracks. It will be easier to replace the drawer after you have finished cleaning. Cleaning Before a Vacation If you will be away for more than a couple of days, remove the compactor bag. Remove the Key-Knob (or Key-Switch) and store it out of children’s reach. TROUBLESHOOTING Try the solutions suggested here first in order to avoid the cost of an unnecessary service call. Trash is not compacting 2. Lift the front of the drawer to clear the stops. 3. Grasp the drawer on the sides and pull it out the rest of the way. Set the drawer down gently. ■ Is the drawer less than half-full? Drawer must be more than half full before trash is compacted. Your compactor won’t operate 4. Vacuum the inside of the cabinet. Liquid spills or wet trash should be cleaned up by hand, or by using a vacuum designed to pick up liquids. 10 ■ Is the power supply cord unplugged? Plug into a grounded 3 prong outlet. ■ Has a household fuse blown or circuit breaker tripped? Replace the fuse or reset the circuit breaker. ■ Is the drawer completely closed? Close the drawer firmly and start the compactor again. ■ Is the Key-Knob turned all the way to START? Turn the Key-Knob (Key-Switch) fully to START and release (on some models). See “Starting Your Compactor.” ■ Did you press ON before pressing START? Press ON before pressing START (on some models). See “Starting Your Compactor.” The drawer won’t open ■ There is not enough compaction or force Is the ram all the way up? Drawer will open only when ram is fully raised. ■ To raise the ram on models with a Key-Knob (or KeySwitch): Turn the Key-Knob (Key-Switch) to START and release. See “Starting Your Compactor.” ■ To raise the ram on models with push button controls: Press OFF, and then press ON. See “Starting Your Compactor.” Is the Solid Cycle engaged? Drawer remains LOCKED until you reset by lifting the foot pedal up. Do you use the compacting cycle frequently enough? Compacting works best when only a few items are loaded. Bottles don’t break ■ How often do you notice this? Bottles will not break every time. The thickness of the bottle’s glass and the content of the trash load below it may prevent the bottle from breaking. ASSISTANCE OR SERVICE Before calling for assistance or service, please check “Troubleshooting.” It may save you the cost of a service call. If you still need help, follow the instructions below. When calling, please know the purchase date and the complete model and serial number of your appliance. This information will help us to better respond to your request. If you need replacement parts If you need to order replacement parts, we recommend that you only use factory specified replacement parts. Factory specified replacement parts will fit right and work right because they are made with the same precision used to build every new ® KITCHENAID appliance. To locate factory specified replacement parts in your area, call our Customer Interaction Center telephone number or your nearest designated service center. Call the KitchenAid Customer Interaction Center toll free: 1-800-422-1230 Our consultants provide assistance with: ■ Features and specifications on our full line of appliances. ■ Installation information. ■ Use and maintenance procedures. ■ Accessory and repair parts sales. ■ Specialized customer assistance (Spanish speaking, hearing impaired, limited vision, etc.). ■ Referrals to local dealers, repair parts distributors, and service companies. KitchenAid designated service technicians are trained to fulfill the product warranty and provide after-warranty service, anywhere in the United States. To locate the KitchenAid designated service company in your area, you can also look in your telephone directory Yellow Pages. Accessories To ensure the proper functioning of your compactor, use KitchenAid replacement parts only. To order replacement parts or accessories, call 1-800-442-9991 and ask for the appropriate part number listed below or contact your authorized KitchenAid dealer. Replacement Parts Replacement Bags - Call for Part Number. Charcoal Air Filters - Order Part Number 4151750. Trim Kits and Panels See “Trimless Panel without Handle” for custom panel dimensions. Color Panel and Handles: Order Part #9871907CB (Cobalt Blue) Order Part #9871907ER (Empire Red) Order Part #9871907MY (Majestic Yellow) Order Part #9871907HG (Hunter Green) Stainless Panel with Towel Bar Handle: Order Part #9871907S (Brushed Stainless Steel) Handles: Order Part #9871564S (Brushed Stainless Steel) Order Part #9871564W (White) Order Part #9871564B (Black) Order Part #9871564T (Biscuit) For further assistance If you need further assistance, you can write to KitchenAid with any questions or concerns at: KitchenAid Brand Home Appliances Customer Interaction Center 553 Benson Road Benton Harbor, MI 49022-2692 Please include a daytime phone number in your correspondence. 11 KITCHENAID® COMPACTOR WARRANTY ONE-YEAR FULL WARRANTY For one year from the date of purchase, when this compactor is operated and maintained according to instructions attached to or furnished with the product, KitchenAid will pay for factory specified replacement parts and repair labor costs to correct defects in materials or workmanship. Service must be provided by a KitchenAid designated service company. KitchenAid will not pay for: 1. Service calls to correct the installation of your compactor, to instruct you how to use your compactor, to replace house fuses or correct house wiring. 2. Repairs when your compactor is used in other than normal, single-family household use. 3. Pickup and delivery. Your compactor is designed to be repaired in the home. 4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, improper installation, acts of God, or use of products not approved by KitchenAid. 5. Repairs to parts or systems resulting from unauthorized modifications made to the appliance. 6. Replacement parts or repair labor costs for units operated outside the United States. 7. Charcoal Filters. KITCHENAID AND KITCHENAID CANADA SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so this exclusion or limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Outside the 50 United States this warranty does not apply. Contact your authorized KitchenAid dealer to determine if another warranty applies. If you need service, first see the “Troubleshooting” section of this book. After checking “Troubleshooting,” additional help can be found by checking the “Assistance or Service” section or by calling the KitchenAid Customer Interaction Center, 1-800-422-1230 (toll-free), 1/04 from anywhere in the U.S.A. Keep this book and your sales slip together for future reference. You must provide proof of purchase or installation date for in-warranty service. Write down the following information about your compactor to better help you obtain assistance or service if you ever need it. You will need to know your complete model number and serial number. You can find this information on the model and serial number label located on the inside panel of the compactor drawer. Dealer name____________________________________________________ Address ________________________________________________________ Phone number __________________________________________________ Model number __________________________________________________ Serial number __________________________________________________ Purchase date __________________________________________________ 9871915A © 2004. All rights reserved. ® Registered Trademark/TM Trademark of KitchenAid, U.S.A., KitchenAid Canada licensee in Canada 4/04 Printed in U.S.A.
advertisement
Related manuals
advertisement