Klipsch RB-10 Bookshelf Speaker Spec Sheet

4'' Two-Way Bookshelf Loudspeaker

RB-10

The Reference Series RB -10 bookshelf loudspeaker is part of Klipsch’s new entrylevel Reference 10 family that offers the same advanced technology and world-class materials as the Reference III models but from smaller enclosures and at lower price points.

As the smallest bookshelf loudspeaker Klipsch has ever made, the RB-10 employs a 4-inch woofer and a 1-inch titanium-dome compression driver loaded with a 4-inch square Tractrix ® Horn for maximum clarity and efficiency.

The woofer on the RB -10 still features

Klipsch’s distinctive, copper-colored

Cerametallic™ material. Made with an anodized aluminum, this cone is strong with low mass. The anodizing process converts its inner and out surface to ceramic. The outcome is a rigid cone with superb damping characteristics that will not flex or resonate at frequencies within the woofer’s operating range.

As in all Reference Series speakers, the RB-10 crossover network is constructed using extremely high-quality components including top-of-the-line internal wiring, polyester filmtype capacitors and an air-core inductor to ensure signal purity and proper driver integration.

The RB-10 has both a back-panel keyhole for on-wall mounting and a threaded insert for attachment to popular adjustable wall and ceiling brackets. Available in a black vinyl finish, the RB-10 features a low-diffraction sculpted baffle and magnetically attached grille for an elegant fit and finish.

■

Magnetically shielded to prevent video interference

■

Back-panel keyhole and threaded insert for popular wall and ceiling brackets

■

Tractrix Horn titanium dome compression driver tweeter for clean, detailed highs

■

Cerametallic cone woofer

■

High sensitivity and power handling

S P E C I F I C A T I O N S

BANDWIDTH

SENSITIVITY

NOMINAL IMPEDANCE

CROSSOVER FREQUENCY

POWER HANDLING

ENCLOSURE TYPE

DRIVE COMPONENTS

90Hz-20kHz ± 3dB

90dB @ 2.83 volts/1 meter

8 ohms compatible

2800Hz

50 watts (200 watts peak)

Bass-reflex via rear-firing port

Two way system using one 1'' (2.5cm) magnetically shielded, titanium dome compression driver with an integral

4'' (10.2cm) square 90˚x 60˚ Tractrix Horn and one 4'' (10.2cm) magnetically shielded,

Cerametallic cone woofer

WEIGHT

HEIGHT

WIDTH

DEPTH

6 lbs. (2.7kg)

8.7" (22.1cm)

5.6" (14.1cm)

7.8" (19.8cm)

FINISH Black Ash woodgrain vinyl

MOUNTING

*All dimensions include grille and binding posts

Keyhole mount with threaded insert www.klipsch.com

1-800-KLIPSCH

All specifications are subject to change without notice. ©2004