Land Pride RTR2570 User's Manual
Add to my manuals
1 Pages
Land Pride RTR2570 is a heavy-duty rotary tiller designed for tractors with 25-55 HP. Its reverse tilling action allows it to easily break through hard ground, while the offset capability helps cover right tire tracks. The tiller features a 17" rotor swing diameter for deep tilling, six tines per flange for improved ground penetration, and a double lip seal on the rotor bearing to keep dirt out and grease in. The #100 drive chain is enclosed in an oil bath for constant lubrication and reduced wear, and the adjustable skid shoes provide precise depth control.
advertisement
Features and Benefits
Rotary Tillers, Reverse Tine Rotation
RTR2570 Model
Features Benefits
American made
Tractor HP rating
Gearbox Warranty
Fits Land Pride
Quick-Hitch
Reverse tilling action
Many tillers are imported. American made means better parts availability.
25-55 HP
3 Years on housing, gears, shafts, seals, bearings. Shows our confidence in the product.
Allows for quick and easy one person hook-up. Cannot be used with offset.
Offset capability
Parking stand
Stamped top hitch
Hitch bolted to inside of support
Reverse action ‘sucks’ tiller into ground, does not walk on top of hard ground like forward rotation tillers can.
Offset 5” by moving lower hitch points, allows to cover right tire track.
Allows for easy hook-up and storage.
Stamped plate adds additional strength to hitch.
Force is applied downward on top hitch, by bolting hitch to inside of support, keeps hitch from spreading outward.
Six tines per flange
17” Rotor swing diameter
Six tines go through the ground better than four.
For deep tilling action.
Double lip seal keeps the dirt out and the grease in.
Double lip seal on rotor bearing
#100 Drive chain enclosed in oil bath
Heavy-duty drive chain reduces stretching. Oil keeps constant lubrication and holds wear to a minimum.
Easy to adjust chain tightener Cast iron chain tightener is a simple bolt adjustment to keep constant tension on the chain.
Adjustable skid shoes Control depth from various settings.
Stamped chain cover
Wear shield on left skid shoe
Cat. 3 driveline with slip-clutch
Spring tines behind tilling action
Formed rear deflector with springs
Front deflector plate
Stamped forming adds additional strength.
Shield protects lower portion of chain cover from wearing due to dragging in the soil.
Standard heavy driveline for rough conditions. Slip-clutch protects other drive train components.
Spring tines sift the material letting bigger items fall first. Sifted soil falls last burying the bigger items.
Formed steel gives the rear deflector additional strength. Springs allow deflector to bounce as it hits obstructions.
Front deflector plate is flexible to take the beating rocks or debris will give it.
Designs, specifications, features and information are subject to change without notice.
04/17/07
311-251F
311-251F
74
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project