4/06

Page 1 of 2

Wall Mounted Fluorescent

Dorm Lyte

6" Width, 48" Nominal Length

1 or 2 Lamp T5 or T8

• For dorms, nursing homes, assisted living, health care facilities, or other over bed or wall mounted applications.

• Up and downlight, 1 or 2 lamp.

• Separate lamp compartments for controlled uplight and downlight.

• 1/8" thick DR acrylic lens.

Unique co-extension.

White opaque center.

Frosted white front sections for subtle glow.

Linear prisms to spread up/downlight.

• Only 3-7/8" deep, meets American With Disabilities Act for wall mounted fixtures.

• Concealed pull-action spring-loaded latches to retain lens.

• 20 gauge cold rolled steel post painted baked white enamel end caps.

• Nominal 4' length.

• Four-way pull switch, (120 volt only) optional.

• Optional low voltage electronic sequential switch for push button control of up/down lighting. UL 544 listed. Includes phone jack type receptacle.

Features Dimensions

3-7/8 (95mm)

Up/Downlight

3-7/8 (95mm)

Uplight or Downlight

4"

(102mm)

6" (152mm)

24" (610mm)

47-15/16 (1218mm)

Job Information

Job Name:

Cat. No.:

Lamp(s):

Volts/Ballast:

Type:

Lightolier a Genlyte company www.lightolier.com

Technical Information: (978) 657-7600 • Fax (978) 658-0595

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710

We reserve the right to change details of design, materials and finish.

© 2006 a Genlyte company Section 4A/Folio I60-10

Page 2 of 2

Model No. DL4X232120SO

LER = FP - 58.6

IW - 53.1

BF - 0.88

Comparative yearly lighting energy cost per

1000 lumens = $4.10

Report Number: G2006054

Lamp: F32T8

Luminaire: Up/down Wall Mounted with

Two Color Co-extruded Lens

Ballast: B232 I UNVHP-B

Report is based on 2950 Lumens per lamp.

Efficiency: 60.4%

CIE Type-Direct-Indirect

Plane: 0-Deg 90-Deg 180-Deg.

Spacing Criteria:

Shielding Angles:

1.9

55

1.1

65

1.1

Luminous Length: 48.000

2.400

Height of Side 6.000

6.000

COEFFICIENTS OF UTILIZATION –

ZONAL CAVITY METHOD. EFFECTIVE

FLOOR CAVITY REFLECTANCE 0.20

0

RC 80 50 30

RW 70 50 30 50 30 10 50 30 10

0 1 58 54 52 42 40 38 34 33 32

0 2 52 47 43 36 33 31 29 27 25

0 3 47 41 36 31 28 25 26 23 21

0 4 43 36 31 28 24 21 23 20 18

0 5 39 32 27 25 21 18 20 17 15

0 6 36 28 23 22 18 16 18 15 13

0 7 33 26 21 20 16 14 16 14 12

0 8 31 23 18 18 15 12 15 12 10

0 9 29 21 16 17 13 11 14 11 9 9

10 27 19 15 15 12 10 13 10 8 8

LUMINANCE DATA IN CANDELA/SQ. METER

AVERAGE AVERAGE AVERAGE AVERAGE

IN DEG.

0-DEG.

45-DEG.

90-DEG.

45

55

10652.

12396.

1310.

862.

3855.

3044.

65

75

85

0

0

0

14783.

19419.

32024.

540.

277.

73.

2384.

1701.

635.

105

115

125

135

145

155

165

175

180

CANDELA DISTRIBUTION

0

0.0

45.0

0

5

465

479

465

455

45

55

65

15

25

35

75

85

90

95

531

581

615

630

623

589

548

504

496

514

425

375

311

241

168

108

55

14

12

32

558

598

623

630

615

581

531

470

448

77

132

195

261

326

384

425

446

448

55

107

170

237

304

365

228

153

95

48

10

0

13

90.0

FLUX

465

455

420

368

301

44

126

190

237

261

254

235

203

172

412

442

448

184

223

257

278

278

252

201

128

43

Wall Mounted Fluorescent

Dorm Lyte

6" Width, 48" Nominal Length

1 or 2 Lamp T5 or T8

Room Size:

Reflectance:

Reading Area:

12' x 10' x 8' Ceiling.

80-50-20 .80LLF

35-40fc

1'

3'

5'

7'

9'

11'

15

15

12

9

8

7

35

25

14

10

8

7

52

31

16

10

8

7

35

35

14

10

8

7

15

15

12

9

7

7

1'

3'

3' 5' 7' 9'

ZONAL LUMEN SUMMARY

ZONE LUMENS % LAMP % FIXT

0 00 30 359 6.1

10.1

0 00 40

0 00 60

0 00 90

90-120

90-130

596

1112

1723

664

942

10.1

18.8

29.2

11.3

16.0

16.7

31.2

48.3

18.6

26.4

90-150

90-180

0 0-180

1472

1843

3566

25.0

31.2

60.4

41.3

51.7

100.0

5' reading position

35 to 40 fc reading plane

(60° from horizontal)

3'6"

Reading

Plane

Ordering Information

Explanation of Catalog Number. Example: DL4X232120SO

DL

Dorm Lytel:

Wall Mounted

Fluorescent

4

Fixture

Length:

4=48"

X = Up/Down Light

R = Independent

Up or Down

Light . (2 lamp only)

Lamp

Quantity:

1=1 Lamp

2=2 Lamp

Lamp Type:

32=32W T8

28=28W T5

54=54W T5

Options/Accessories

Fusing: Internal fast blow fusing: SUFFIX: GLR.

Internal slow blow fusing: SUFFIX: GMF.

Radio Interference Filter: 120 or 277 volt, 50 or 60 Hz. One per fixture. SUFFIX: R.

One per Ballast, SUFFIX: B.

Electronic (Low Voltage) Sequential Switch: Switch factory mounted for Up and

Down Light operation from pillow switch. Includes phone jack type receptacle.

SUFFIX: SW.

Momentary Button Cordset: Traditional "Winged" Pendant design ESD protection to 15,000 volts. Heavy duty 7' cable with phone plug and security clip.

Consult factory: Part number 7800W-7 CSP. (Button Cordset can only be used with

SW Sequential Switch option)

4-Way Pull Switch: SUFFIX: 4P.

Electrical Wiring Options: Consult factory.

Specifications

Materials: Chassis parts are die-formed code rolled steel. End Caps–20 gauge cold rolled steel. Refractor–1/8" thick DR acrylic, unique co-extrusion, white opaque center, linear prisms to spread up/down light.

Finish: exterior white baked acrylic enamel.

End Caps and Cover–Post painted baked white enamel, 86% reflectance.

Phospate undercoating.

Voltage:

120, 277 or UNV

UNV=120-277

Options:

Add appropriate suffix to catalog no., ie: (GLR)

Ballast Type:

<

20THD

<

10THD

1 or 2 Lamp 32W Elec. T8 SO *

1 or 2 Lamp 28W Elec. T5

1 or 2 Lamp 28W Elec. T5

–

–

H I *

P I †

† PG ††

– † PG †† 1 or 2 Lamp 54W Elec. T5

(Nominal 48")

LOL T8 Dimming PS * –

*Instant Start Standard

†Instant Start (120 or 277)

††Program Rapid Start (UNV only)

NOTE:

For T8 UNV, you must use H I Ballast Code.

Specifications (continued)

Electrical: Thermally protected class “P” ballast CBM approved, non PCB. If

K.O. is within 3" of ballast, use wire suitable for at least 90°.

Labels: I.B.E.W./UL and ULc Listed.

Job Information Type:

Lightolier a Genlyte company www.lightolier.com

Technical Information: (978) 657-7600 • Fax (978) 658-0595

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710

We reserve the right to change details of design, materials and finish.

© 2006 a Genlyte company Section 4A/Folio I60-10