Control Module

M201E-240

• ADM loop technology with

System Sensor/200 protocol

• One output with dry relay contacts

230VAC

• Status LED

• Setting of module address via decadic rotary switches

• Supplied with module box (wall-mount case)

Description

The Control Module M201E-240 serves to actuate external devices by means of one normally open and a separate normally closed relay contact, suitable for switching 230VAC. Communication to the fi re detection control panel is established via the ADM loop using

System Sensor/200 protocol.

A status LED indicates the condition of the module.

The addressable control module is supplied in a module box for easy wall mounting. Separate terminals enable the operation of the module with or without the integrated dual-isolator.

Specifi cations

Operating voltage

Current consumption

Contacts

Contact rating

Ambient temperature

Dimensions L × W × H

Colour

Weight

Approval

Order number

Order name

Supply through loop voltage approx. 510µA (quiescent)

1 × NO, 1 × NC

5A/30VDC or 5A/230VAC

-20°C to +60°C

132 × 137 × 40 (mm) cream/transparent smoke-coloured

195g

VdS G202141

249105

Control Module 1xRel.Out/Anal./200/SS M201E-240

Building Safety. Building Security.

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27

[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED

A

M201E-240_DBL_LST_EN_0804.PDF • PAGE 1