LumiSource Rodo LED Lamp Instructions
PDF
Dokument
Annons
Annons
Rodo LED Lamp
Assembly Instructions
Instrucciones De Asamblea
Instructions d’Assemblée
2. Screw second pole onto L-shaped pole end.
ON/OFF Button
1. Insert rod into hole in base until secure.
3. Insert USB cord end into back of base. You can power this lamp with the USB attached to your computer/other device OR connect the USB to the included power adapter as pictured.
/
Ladda ner
Bara en vänlig påminnelse. Du kan visa dokumentet här. Men viktigast av allt, vår AI har redan läst det. Den kan förklara komplexa saker på ett enkelt sätt, svara på dina frågor på vilket språk som helst och hjälpa dig att snabbt navigera även de längsta eller mest komplicerade dokumenten.
Annons