Magnavox VRU442AT Owner's Manual

MAGNAVOX
Smart. Very smart”
IMPORTANT!
Return Your Warranty Registration Card
Within 10 Days. See Why Inside.
EEC J АТ ¡A A" NIN ESN "~y AN Cd (GRU LS I UI U dd LW CAI
you receive all the benefits youre entitled to.
Once your MAGNAVOX purchase is registered, you're eligible to receive all the privileges of owning a MAGNAVOX
product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take
advantage of these important benefits.
5 Owner | В +! M lodel
erifi EO - Confi rmation | Registration a
| Registering your r product within «Your completed Warranty _ В Returning your Warranty Registration
10 days € onfirms your right to maxi- — Registration Card serves as - ~~ Card right away guarantees you I
| mum protection under the terms and. - verificátion of ownership i in the © receive all the informatio \-and special
| ‚conditions of your MAGNAVOX. war- - event of product ¢ theft or. loss. offers which you qualify for: as. the:
rant. TE o oo . owner of your model. E
Congratulations on your purchase, and wel- MAGNAVOX
come to the “family? < > ”
Dear MAGNAVOX product owner: mart. Very smart.
Thank you for your confidence in MAGNAVOX You've selected one of the best-built, best-backed products
available today. And we'll do everything in our power to keep you happy with your purchase for many years to come.
As a member of the MAGNAVOX “family,” you're entitled to protection by one of the most comprehensive warranties and outstanding service net-
works in the industry.
What's more, your purchase guarantees you'll receive all the information and special offers for which you qualify, plus easy access to accessories from
our convenient home shopping network.
And most importantly you can count on our uncompromising commitment to your total satisfaction.
All of this is our way of saying welcome-and thanks for investing in a MAGNAVOX product.
Sincerely,
= => P.S. Remember, to get the most from your MAG-
NAVOX product, you must return your
Robert Minkhorst . . Le
Warranty Registration Card within 10 days.
President and Chief Executive Officer ma )
So please mail it to us right now!
For Customer Use
Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for future reference.
Model No. Serial No.
ÑA This “bolt of lightning” indicates uninsulated material within your unit may cause an elec-
Know th ese trical shock. For the safety of everyone in your household, please do not remove product cov-
ering.
safetysymbols Á The “exclamation point” calls attention to features for which you should read the enclosed
literature closely to prevent operating and maintenance problems.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIP-
A L DIN MENT TO RAIN OR MOISTURE.
А RISK OF ELECTRIC SHOCK A CAUTION: To prevent electric shock, match wide blade of plug to wide slot, and fully insert.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans
REMOVE COVER [OR BACK). NO USER SERVICEABLE PARTS la borne correspondante de la prise et pousser jusqu’au fond.
INSIDE. AEFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
MAGNAVOX Visit our World Wide Web Site at http://www. magnavox.com
3
Introduction
Features : Welcome to your VCR owner’s
HQ (High Quality) System : manual. This manual was designed
* Frequency Synthesizer Tuning with Auto Set Feature : for you. When looking through it, it
* On-Screen Displays in English or Spanish : will help you to keep several things
Indicator Panel : in mind.
Auto Clock Setting :
* Auto Tracking : One, this manual is divided into four
* One Touch Recording : sections. The Getting Started section
* Unattended (Timer) Recording : guides you through the initial setup
* VCR Plus+ programming : and simple operations of your VCR.
* Special Effects Playback: Forward and Reverse Searching; Still; : The Operating Your VCR section
Variable Slow; Frame Advance : shows you all of the controls of the
* Wireless Remote Control With TV and Cable Converter Box : VCR and remote control and
Control Possibility : explains on-screen displays. The
* Repeat Playback : Doing More section guides you
* Auto Operation Features : through the features of your VCR.
* Real Time Counter : Finally, the Information You May
* Daylight-Saving Time : Need section provides information
: you may or may not need — other
: hookups, for example, and trouble
Safety Precautions : checks.
FCC Warning: Any unauthorized changes or modifications to:
this equipment void the user’s authority to operate it. : Two, the instructions follow a sim-
This VCR, equipped with a HQ (high quality) system, is compati- : ple format. Detailed steps explain-
ble with existing VHS (video home system) equipment. ; Ing operations are on the outside
: edges of pages. Illustrations accom-
Philips Consumer Electronics Company recommends that you : panied by brief steps explaining
use only video cassette tapes that have been tested and inspected for ; operations are on the inside edges of
use in two, four, six and eight hour VCRs, and which are labeled : Additional informati
with the [VHS] mark. The use of tapes that have not been inspect- ; P%48%5. ACH aon can
ed for use in two, four, six and eight hour VCRs may result in poor : be found in boxes labeled NOTES
picture quality and excessive deposits on the video heads, which : along the lower edges of pages.
may not be covered by the warranty if damage occurs. :
: Finally, never be afraid to try a fea-
Note to the CATV System Installer: This reminder is provided to : ture! You cannot hurt your VCR
call the CATV system installer’s attention to Article 820-40 of the : by trying any of the features in
National Electrical Code, which provides guidelines for proper : this manual!
grounding — in particular, specifying that the cable ground shall be :
connected to the grounding system of the building, as close to the : So read on — and relax
point of cable entry as possible. :
VCRs
VCR Plus+ and Plus Code are trademarks of Gemstar Development :
Corporation. :
The VCR Plus+ system is manufactured under license from :
; « | Before doing anything else, record the
Gemstar Development Corporation. VCR's model and serial numbers in the
. “| . : |spaces provided on page two. These num-
Copyright 1996 Philips Consumer Flectronics Company. All rights * | bers will help us assist you if you ever call
reserved. : |for help.
4
Table of Contents
Getting Started
Introduction ...............eceeemrerarere 000 aneonenveceacodrereredecrereroero, 3
Table of Contents ........ aaa aaa de nrererrererecdrerdoararendendrdeovreveooaa 4
Before Using Your VCR Lo. RR 4 a a a a a ae 5
Hooking Up Your VCR... eee 6
Turning On Your VCR ©. oo 00rearecaoencecoaoororeroaa ra. 7
Playing ..... LA n arenero are nrarenarereorecevarervnaaoerdarvererererano 8
Recording . ... RER A a a a a a a ea aa 9
Setting the Clock... LL A ee a ea da LL Le a a a a a aa ee 10-12
Operating Your VCR
On-Screen Displays ......0000 00000444 A A 4 de da A A Aa a ea a a a ae 13
Remote Control Buttons .........02000 0444414 aa 4 1 A aa a AL Aa a aa ea a aa 14-15
Display Panel . ....... A A eee 4 a 44 4 A AA A da 4 a a ee a ae 16-17
Front Panel ...... LL AA ee 4 4 4 a A A eee A LL AA A a a a a a ea a ae 18
Rear Panel .......000 00000 LL AA eee 44 4 A AAA A a 4 A A 4 A ea a a a a ea ae 19
Doing More
Recording One Channel/Watching Another ....................... ..... . ...... 20
One Touch Recording ............ i ieee 21
Timer Recording ....... co ee 22-23
Rerecording (Tape Duplication) . .......... ee 24
Setting Up VCR Plus+ . «Lo RR 25-26
Timer Recording With VCR Plus+... LL La a ea a a a ea a a a aa a ee 27
Channel Memory . ..... LA A AAA A4 ee A A a a aa a a a 28-29
Language/Daylight-Saving Time Selection ........11010000000 0 ca anna 30
Playback Options .......0200000 000 LL A AA ALL LA AAA A A a A ee eee a aa 31-34
Playback Features ......22000 00010 LA ee ee AA LA A AAA A ea a a da AA a a a A a a a ae 35
TV Code Setting ......00000 4044444444 44 4e 4e ee 444 444 4 aa a a a a 4 a a a a a ee 36
Cable Converter Box Code Setting ............ tiie. 37
Information You May Need
Specifications/Notes ...........—.oeeeeceevereaaeaacacocooaaooaoo0oaceao, 38-39
Other Hookups .................e.. ee eeeereceaeaenrearenacaenrovanecaro 40-43
Before Requesting Service ............ i nonerae 44-45
Glossary RR RR AA AAA 4 a a a a ae a a a ee ae aa ee 45
Warranty «oe 46
Тайех .... AAA 47
5
Before Using Your VCR
..e.”.e.. 166000000000 0
Putting Batteries
in the Remote Control
To remove the battery compartment
lid, push in the tab, then pull up the
lid.
Place two AAA batteries inside the
battery compartment with their
polarities (+ and — ends) aligned as
indicated.
Replace the battery compartment
lid.
* The remote control and its batteries are supplied.
+ Do not mix alkaline and manganese batteries.
* Do not mix old and new batteries.
(AER EN NEE ENRENNEERE ENN EEN NENENENNEZR]
Erase Protection
Video cassette tapes have record
tabs to ensure that recordings are
not accidentally erased.
....m0..u«w...............[...[........0005000e005e.
To prevent accidental
erasure, break off the
tab with a screwdriver.
VCR's remote sen-
sor, making sure to
Using the Remote Control
Point the remote
control at the | = Ф
stay within the
angle shown.
Do not put objects
between the
remote control
and the VCR.
To select channels
100 - 125 using the
number buttons,
first press the 100 puse o) >) env To select chan-
button, then press © © © nels
the last two digits \(GD = > 1 wine the
of the desired u >
channel. For — | 2/0] first press 0, then
example, for chan- y or press ие desired
nel 117, press the ESOS г аппе num er
or example, for
100 button, 1, 7. BE) channel 6 Ps
The 100 button #6) © › Р
will work only G) 0, 6.
when selecting nn
cable channels — 100 Button
and when CABLE 583
TV has been E à)
selected at the 56
Tuner Setup MAGNAVOX
menu.
See page 28 for —
details,
To record again, cover
the hole with cello-
phane tape.
Types of Video Cassette Tapes and Tape Speeds
(Super Long Play)
Tape Speed Maximum Record/Playback Time
| Type T160 T120 | T60
SP 2 hrs. 40 mins. | 2 hrs. | 1 hr.
(Standard Play)
LP 5 hrs. 20 mins. | 4 hrs. | 2 hrs.
(Long Play)
SLP
8 hrs. 6 hrs. | 3 hrs.
* In this VCR, use only tapes with the IIS] mark.
* The chart at the left shows the recording/playback time for
three types of video cassettes (T160, T120, T60). There
are two recording speeds: SP and SLP. There are three
playback speeds: SP, LP, and SLP. During playback, the
VCR selects the tape speed automatically. When record-
ing, you can change the speed using the (Tape) SPEED
button (see page 15).
Make sure any light adhesive stick-on notes are removed
from the video cassette tape before putting it in the VCR.
Removable labels like these can jam the VCR.
6
Hooking Up Your VCR
O ETTANTECADEAA TOONRQCRQCACOOSU QDE| HATO CECODOCcÓOCÓÓOCw "BEST COUCNQCHOArETOCCQOSCCCENNDOCROxrÓdEDODA "Tasca
The basic VCR/TV connection — antenna/cable to VCR to TV — is shown below. For other hookups, including those that use
cable converter /descrambler boxes, see pages 40-43.
Disconnect the antenna or
cable from your TV.
Connect the antenna/cable
to your VCR.
Connect your VCR to your
TV using the black RF
coaxial cable (supplied).
Make sure both the TV and
the VCR are plugged in.
Select channel 3 or 4.
Set the CH3/CH4 switch on the back of the
VCR to CH3 or CHA, whichever channel is
not used or least used in your area. To oper-
ate your VCR with your TV, set the TV to the
same channel. For example, when playing a
tape, if the CH3/CH4 switch is set to CH3,
the TV should be on channel 3.
Back of TV
(example only)
Indoor Antenna
(VHE/UHF)
Outdoor Antenna /
(VHF/UHF) и ©
7
VHF/UHF
Cable Combination
« Antenna Jack
ANT(enna).
IN(put) Jack
a ^
{wc — = oo === En ® 1
© аб — 1 | —— es |
LA | Face
Back of VCR
RF OUT (put)
— Jack
Antenna or Cable 8 ANT(enna)
IN(put) Jack Back of TV
(example only)
| COMENT =p > RF OUT (put) Jack
A
© 2 RF
Back of VCR Coaxial
Cable
Wall Outlet (supplied) VHF/UHF
Combination
Antenna Jack
Wall
Outlet
TV
CH3/CH4
Switch
|
CH3 CH4
Ne
Tal
Wall Outlet
7
Turning on Your VCR
TV and VCR
Before turning on your VCR, make sure
there are batteries in the remote control and
the VCR and TV are connected (see pages
five and six).
Set the TV to channel 3
or 4, whichever chan-
nel the CH3/CH4
switch on the back of
the VCR is set to.
rom
Switch
| «—>-
CH3 CHA
—]
as the CH3/CH4 switch on the back of the
VCR.
Press the VCR button, then press the
POWER button. The VCR will come on
and the language select display screen
shown below will appear.
Remote Control
TO SELECT PUSH NO. SHOWN
1 ENGLISH (ON)
2 ESPANOL
MAKE SELECTION OR
PUSH MENU TO CONTINUE
Press the VCR button,
then press the
POWER button.
#5 e 2 Press the CH(annel) Up
button.
(4) (6) Press the Number 1 button to select English
E on-screen displays or the Number 2 button
ress the Num e ! (100 a to select Spanish on-screen displays.
u on Or ng 18 RECTA GO-TO VAR.SLOW
on-screen displays or = = 5 Press the MENU
the Number 2 button "BE ® button. :
for Spanish on- 00 Press the MENU button. The channel pro-
screen displays. gram display shown below will appear.
(
CONNECT ANTENNA OR CABL
TO VCR
THEN..
PUSH CH UP KEY
* If you do not see any on-screen displays when you turn on the VCR, repeat
the steps under “Hooking Up Your VCR” on page six, then try again. If
you still do not see any on-screen displays, follow the steps under “Channel
Memory” on page 28 and “Language Selection” on page 30.
* To skip this feature and play a tape immediately, insert a tape with its
record tab removed. Playback will start immediately. Or, to skip step 3,
press the MENU button. All on-screen displays will be in English. To skip
step 5, press the STOP button. Channels will not be programmed.
* To program channels or change the language at a later time, follow the
steps on pages 28 and 30.
* If you try to program channels when there is no antenna or cable connected
to the VCR, AUTO SET PROCEEDING / PLEASE WAIT will appear on-
screen for a few moments. Then, NO TV SIGNALS will appear on-screen.
Connect an antenna or cable to the VCR and try again. You may need to
follow the steps on page 28.
* You cannot program channels if a cable converter box is connected to the
VCR, which is connected to a TV. If you have this kind of connection, see
page 40-43 for details.
* The instructions on this page only work when you turn on the VCR for the
first time.
FOR PLAY ONLY - PUSH STOP
ess the CH(annel) Up button to begin
automatic channel programming. AUTO
SET PROCEEDING / PLEASE WAIT will
appear on-screen. The VCR will place all of
the channels you receive into its memory,
so when you scan through channels using
the CH(annel) Up/Down buttons, you’ll
only scan through channels that you
receive. When channels are programmed,
AUTO SET COMPLETED will appear on-
screen briefly. Then the TV will go to the
lowest channel programmed.
CE EE tt se TR NRT NE RENN REP NON IRON NRT N ERR E RTO taii rants sacttttasosttestosantsnassnsesscssnsentess
Read and follow the steps below to play a
tape.
Turn the TV on and set it to channel 3 or 4,
whichever the CH3/CH4 switch on the back
of the VCR is set to.
Insert a tape in the VCR. The power will
come on. The VCR will place itself in VCR
position automatically (the VCR light on
the display panel of the VCR will appear).
If the VCR light does not appear, press the
VCR/TV button once. If the tape's record
tab has been removed, playback will start
automatically.
If playback does not start automatically,
press the PLAY button to start playback.
PLAY will appear on the display panel of
the VCR.
Press the STOP button on the remote con-
trol or the STOP/EJECT button on the VCR
once to stop playback.
Press the REWIND/SEARCH button to
rewind the tape.
Press the EJECT button on the remote con-
trol or the STOP/EJECT button on the VCR
again to remove the tape.
CS TT TALTOLALORCCUACOCCCROTTADRHOUHOACUR|NOCALTEONDOCECTCEDEECIOCOpCCOOOCCQCTCOOCAOCADOCLISROOCESOABROCTAEDO
Turn the TV on and
set 1t to channel 3 or
Insert mn
т. > ©
a tape. | « wma
6 566 FE/0:66:06,.8 59) ES |
a e I
To start play-
back, press
the PLAY
button.
Press the
To stop
REWIND/SEARCH playback,
button or the press the
REW(ind) button to STOP button
rewind the tape. or the
STOP/EJECT
E Bl button once.
O OU
2.2.5
2 22
Press the
Nr EJECT button
or the
STOP/EJECT
button again
to remove the
tape.
* Playback options and features — slow motion playback, for example — are
discussed on pages 31 - 35.
9
Recording
Read and follow the steps below to record a
television program.
Turn the TV on and
set it to channel 3 or
4. Turn the TV on and set it to channel 3 or 4,
whichever the CH3/CH4 switch on the back
N of the VCR is set to,
MAGNAVOX (Gers) ; Insert a tape.
= Insert a tape with its record tab intact (see
Sm 0:00:00. 5%) dal page five) in the VCR. The power will
= come on.
Make sure the VCR If the VCR light on the display panel of the
light is on. VCR comes on, go to step 4. If the VCR
If the VCR light is not light does not come on, press the VCR/TV
on, press the VCR/TV button once.
button once.
To stop recording, Press the (Tape) SPEED button on the
; press the STOP remote control until the desired tape speed
Press the PAUSE button. (see page five) appears on the TV screen.
button to pause
recording. To start
recording again,
press the PAUSE
button again.
Press the VCR button, then use the
CH(annel) Up/Down buttons or the Number
buttons to select the channel to be recorded.
Press the VCR
button, then use the
CH(annel) Up/Down
buttons or the |
©) ( Number buttons to Press the REC(ord)/OTR button to start
D 5 select the channel recording.
Press the hy
Oo you want to record.
REC(ord)/OTR 55
button to start MAGNAVOX
recording. р
To pause the recording (for example, during
commercials), press the PAUSE button. To
start recording again, press the PAUSE but-
ton again.
Press the (Tape)
SPEED button to
select tape speed.
в To stop recording, press the STOP button.
If the REC(ord)/OTR button is pressed while a tape without a record tab is
in the VCR, PROTECTED CASSETTE CANNOT RECORD will appear on-
screen, then the VCR will eject the tape .
If the REC(ord)/OTR button is pressed while no cassette is in the VCR, NO
CASSETTE will appear on-screen.
* You can change the tape speed while the VCR is recording, but some distor-
tion will appear on the tape.
Press the EXIT/STATUS button to see the tape counter (see pages 13 and
32).
* Recording options are on pages 20 - 27.
10
Setting the Clock
LAA PT TTTTOLICACOGEOCARADDI RARCCRCCOACTONKACTOADRRACHOCOACRTEARTEAOCQTACO HERA QACTHEACHHRASCYAAECORECOOSOEGECOGCOAOCZACnNCOSO
Before you begin, make sure:
*The VCR is on and in VCR position
(see pages 15, 16 and 18).
$ You make each entry within 10 sec-
onds of the previous entry (otherwise,
the VCR will exit Set Clock mode and
you will have to start over).
& You have correctly chosen TV or
CABLE TV at the TUNER SET UP
menu.
Remote Control
When the power plug is connected to an
AC outlet, the correct time will appear
on the display panel of the VCR (when
the power is Off).
@ When — — : — — appears on the display
panel, you can not use the AUTO
CLOCK feature. You must set the
clock manually (see page 12). CLEAR Button —
g To change an incorrect time, follow
the steps under Time Zone Selection MENU Button —t=e=
or PBS Channel Selection (see page HS
11). Press the Number 4 button to EXIT/STATUS
select SET TIME ZONE.
Button —
During AUTO CLOCK SETTING,
TO SELECT PUSH NO. SHOWN
the display panel shows as below: 1 AUTO (ON) Number Buttons —
2 ATLANTIC
NOTSED , SEN Ena =
‘ии | 5 MOUNTAIN 5
-| Auto _|- >| AM 6:00 7 ALASKA rs
77 ` 8 HAWAII QO U ©
PUSH MENU TO CONTINUE & 55
MAGNAVOX
Time Zone Selection
Use the Number buttons to
Press the MENU button to bring up select your TIME ZONE. If you
the main menu display. live near the boundary of an
TO SELECT PUSH NO. SHOWN adjacent time zone, or if you
1 PROGRAM receive cable TV channels, your
2 VCR SET UP
3 TUNER SET UP PBS channel may come from a
4 . . .
5 SET CLOCK | different time zone. In this case,
TO END PUSH EXIT select the correct time zone man-
ually.
Press the Number 5 button to select
SET CLOCK. (If AUTO CLOCK is
set to OFF, SET TIME ZONE will
not be available in the menu. Follow
the steps under PBS Channel
Selection to select AUTO CLOCK,
then start again at step 1.)
Press the MENU button, then
press the EXIT/STATUS button.
Press the POWER button to turn
off the VCR. Make sure that the
VCR is off until the next hour so
that the clock can be set. (The
SET CLOCK clock is automatically adjusted
) AUTO CLOCK (ON) on the hour except at 11:00 PM,
2 DAYLIGHT SAV TIME (ON)
3 SET MANUAL CLOCK (OFF) midnight, 1:00 AM and 2:00
4 SET TIME ZONE
(AUTO) AM.)
TO SELECT PUSH NO. SHOWN
TO END PUSH EXIT
CS ATECOTACCCCOROQOATACOOUALECHACTODmACORECORDTHjODEACQROA QECCRCLECOORABECODO
17
Setting the Clock (cont’d)
Press the Number 5 button to select SET CLOCK.
SET CLOCK
1 AUTO CLOCK (ON)
2 DAYLIGHT SAV TIME (ON
3 SET MANUAL CLOCK (OFF)
4 SET TIME ZONE
Remote Control (AUTO)
TO SELECT PUSH NO. SHOWN
TO END PUSH EXIT
If (ON) appears to the right of AUTO CLOCK, press the Number 1
button twice. If (OFF) appears to the right of AUTO CLOCK, press
© — MENU Button the Number 1 button once.
AUTO CLOCK
— CLEAR Button AUTO CLOCK USES
) PBS CHANNEL DATA
— EXIT/STATUS 1 SET PBS CH. AUTO
2 SET PBS CH. MANUAL
Button
TO SELECT PUSH NO. SHOWN
TO END PUSH EXIT
>
Number Buttons
EEE) EE]
O y
2.9 О Ÿ To tell the VCR the PBS channel from which to take the time,
2 9 = press the Number 2 button to select SET PBS CH. MANUAL.
e
Use the Number buttons to enter your PBS channel number, (If
you make a mistake, press the CLEAR button.)
Press the EXTI/STATUS button. You will be prompted to turn off
the VCR.
Press the EXTI/STATUS button, then go to step 5.
% To have the VCR find the PBS channel from which to take the
: time, press the Number 1 button to select SET PBS CH. AUTO.
: You will be prompted to turn off the VCR.
.......>...>.>.... 00000000000000000000000000200000000000808 .. Press the EXIT/STATUS button. then go to step 5.
(1
TS TITO TO COLALEADETEDOESACECOENOCLCOCATARAETANCPQQTOCECOCHAOCRERACTESSACCODACO CTC OACETATETOETDOECUCEOECCODSECDEORCECEOCUCDECADO
PBS Channel Selection SET AUTO CLOCK(PBS)CH
CH 12
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
Press the MENU button to bring up the main
menu display.
TO SELECT PUSH NO. SHOWN
1 PROGRAM
2 VCR SET UP
3 TUNER SET UP
4 INPUT SELECT
5 SET CLOCK
TO END PUSH EXIT
Press the POWER button to turn off the VCR. Make sure that the
VCR is off until the next hour so that the clock can be set. (The
clock is automatically adjusted on the hour except at 11:00 PM, mid-
night, 1:00 AM and 2:00 AM.)
12
Setting the Clock (cont’d)
Follow the steps below to manually
set your VCR's clock. Make sure:
©The VCR is on and in VCR posi-
tion (see pages 15, 16 and 18).
€ You make each entry within 10
seconds of the previous entry (oth-
erwise, the VCR will exit Set
Clock mode and you will have to
start over).
6 You have correctly chosen TV or
CABLE TV at the TUNER SET
UP menu.
Press the MENU button to bring up
the main menu display.
TO SELECT PUSH NO. SHOWN
1 PROGRAM
2 VCR SET UP
3 TUNER SET UP
4 INPUT SELECT
5 SET CLOCK
TO END PUSH EXIT
Press the Number 5 button to select
SET CLOCK.
SET CLOCK
1 AUTO CLOCK (CN)
2 DAYLIGHT SAV TIME (ON
3 SET MANUAL CLOCK (OFF
4 SET TIME ZONE
(AUTO)
TO SELECT PUSH NO. SHOWN
TO END PUSH EXIT
Press the Number 3 button to select
SET MANUAL CLOCK.
TIME --:-- --
TO END PUSH EXIT
Within 10 seconds, press two Number
buttons for the hour and two Number
buttons for the minute(s). Then press
1 for AM or 2 for PM. For example,
for 2:15 PM, press 02, 15, 2.
“Enter a 0 before single digit num-
bers.
“Entries that do not match the VCR's
internal calendar will cause a ques-
tion mark (?) to appear on-screen.
To make corrections, press the
CLEAR button until the space for
the number you want to correct 1s
flashing. Then enter the correct
number.
TIME 02:15 PM
MONTH --4£—/——
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
Press two Number buttons for the
month, two Number buttons for the
day, and two Number buttons for the
year. For example, for July 1, 1996,
press 07, 01, 96. The day of the
week will appear automatically.
TIME 02:15PM
DATE 07/01/96
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
Press the EXIT/STATUS button to
start the clock. The screen will
return to the program you were
watching.
Remote Control
EXIT/STATUS
Button
Number Buttons
То reset the clock, follow the steps
above.
To display the time, press the EXIT/STA-
TUS button. A status display, which
includes the time, will appear on the TV
screen. For details, see “VCR Status
Display” on page 13.
Power failures can cause you to lose
your clock setting as well as pro-
grammed channels. If this happens, fol-
low the steps on pages 7 and 10 - 12.
If the numbers entered do not match the
VCR's internal calendar, the entry will
be rejected and a question mark (?) will
appear on-screen.
If you press the EXIT/STATUS button
while you are setting the clock, the TV
screen will return to the program you
were watching. If this happens, start
over.
To program the VCR so its clock will
automatically move forward one hour in
April and turn back one hour in October,
Jollow the steps under Daylight-Saving
Time selection on page 30.
VCR Status Display Screen
Function
Button
Pressed Time
|
STOP 12:00 AM
CH10 —Channel
SLP M 1:23:45
|
Tape Counter
Speed and
Counter
Memory
* In On Screen On and Counter
Only modes:
* You may bring up the status display at
any time by pressing the EXIT/STA-
TUS bution.
Channel numbers (when tuned) will
be displayed for a few seconds.
If the channel you select has no
broadcast, the screen will become a
solid blue field. The screen will
remain blue until you select an active
channel.
Press the EXIT/STATUS button at any
time to change the display on the dis-
play panel to show the time, counter
information, or channel number.
13
On-Screen Displays
.5000000040000000000080500505058 т.о EEE о
VCR Status Display
A status display, which includes the current time, channel, and other informa-
tion (see illustration of the status display at left), will appear when you press
the EXTI/STATUS button or certain function buttons. The contents of the
Status Display may vary.
ON SCREEN ON:
9 Whenever you press the PLAY button or the STOP button, some of the con-
tents of the Status Display will appear for five seconds.
COUNTER ONLY:
@The tape counter will appear on-screen at all times. Whenever you press the
PLAY button or the STOP button, some of the contents of the Status Display
will appear for five seconds. After five seconds, only the counter will remain
on the screen.
ON SCREEN OFF:
No Status Display will appear when you press function buttons or the
EXIT/STATUS button.
To select one of the status display modes, follow the steps below.
Press the MENU button to bring up the main menu display.
Press the Number 2 button to select VCR SET UP.
TO SELECT PUSH NO. SHOWN
1 SET REPEAT PLAY (OFF)
2 ON SCREEN MODE
3 LANGUAGE
4 SET GUIDE CHANNEL
5 GUIDE CHANNEL MAP
TO END PUSH EXIT
Press the Number 2 button to select ON SCREEN MODE.
TO SELECT PUSH NO. SHOWN
1 ONSCREENON — (ON)
2 COUNTER ONLY
3 ON SCREEN OFF
TO END PUSH EXIT
Press the Number 1 button to select ON SCREEN ON, the Number 2 button to
select COUNTER ONLY, or the Number 3 button to select ON SCREEN OFF.
ON will appear beside the selected status display mode.
Press the EXIT/STATUS button to exit.
14
Remote Control Buttons
VCR Button
000000588 0000000000084 0507000000057008000570 04080088
TV Button
Press this button before pressing buttons that control the VCR. Press this button before
CBL Button
Press this button before pressing buttons that control the
cable converter box.
POWER Button
After pressing the CBL, VCR or TV button, press to turn on or off the cable con-
verter box, VCR or TV.
F.(rame) ADV(ance) Button
Press when in Still mode to advance the picture one frame at a time.
Details are on page 34,
pressing buttons that control
the TV.
PLAY Button
When in Stop mode, press to rewind the tape at high speed. When in Play mode,
press to rewind the tape while the picture stays on-screen.
VOL (ume) Up/Down Buttons
Press to increase or decrease the TV”s volume.
\
Press to play a tape. Also, press to release Slow, Still or Search mode and to
return to normal playback. Details are on page 34.
Rewind/Search Button
CH(annel) Up/Down Buttons
After pressing the CBL, TV or VCR button, press to scan through the channels of
the cable converter box, TV or VCR.
EXIT/STATUS Button ——
Press to exit on-screen menus.
Press to bring up the Status Display. Details are on page 13.
a
Zu
a
A
=
<
О
GI)
D
Number Buttons |
After pressing the CBL, TV or VCR button, press to select the channel of the
cable converter box, TV or the VCR. Also, use to select VCR on-screen
(>)
lo) [=] [=] [+]
P|[e] [e] [e] (|
>
2
o
=
O
=
menus or to program VCR functions.
Channels 1-9
To select, press 0, then the channel you want. For example,
to select channel 7, press 0, 7.
Channels 100 and above
To select, press the 100 button, then the last two digits of the channel you
want. For example, to select channel 117, press the 100 button, 1, 7.
REC(ord)/OTR Button —
Press once to start a recording. Details are on page nine.
Press 2 - 19 times to start a one touch recording.
Details are on page 21.
MUTE Button
O
Ó
a
=
с
—
m
©
U
m
m
o
о
г
Q
=
=
m
=
O
22
<
=
©
o
5
2
©
T
Ó
О
© ©
<
:
m
<
o
-
+4
D
>
o
=
=
o
O
©
©
<=
>
5
x
Press to eliminate the TV's sound. Press again to return to the previous volume.
GO-TO Button —
In Stop mode, press to select the tape counter location number you want the tape
to automatically forward or rewind to. Details are on page 33.
SLOW and VAR.(iable) SLOW Buttons
When playing a tape recorded in SP or
SLP speed, press the SLOW button to
view the picture in slow motion. Then
vary the speed from 1/6 to 1/30 of normal
speed using the VAR.(iable) SLOW but-
tons. Details are on page 34.
15
Remote Control Buttons (cont’d)
PAUSE Button
When in Record mode, press to temporarily stop the recording (pause). When
in Play mode, press once to freeze the picture (still). Press a second time to
resume normal recording or playback. Details are on pages 9 and 34.
Fast Forward/Search Button
When in Stop mode, press to advance the tape at high speed. When in Play
mode, press to advance the tape while the picture stays on-screen. Details are
on page 34.
STOP Button
Press to stop the tape.
VCR PLUS+ ENTER Button
Press to start a VCR Plus+ timer recording. Details are on page 27.
U VCR г \У)
ENTER CLEAR Button
XIT/ GEN, Press to erase incorrect data when programming VCR functions. Also, press to
STATUS CLEAR |
=o
2
С
+]
DEE LO
reset the tape counter. Details are on page 32.
MENU Button
Press to bring up the main menu display.
(Tape) SPEED Button
Press to select recording speed (SP or SLP).
— MEMORY Button
Press to memorize a tape counter location at which the counter was set to
0:00:00. Details are on page 32.
=
m
o
Q
7
a)
о
=
o
5
T
о
rm
Q
=
a
=
<
—
m
Nn 8
Ф
®
©
E
SKIP SEARCH Button
B Press during playback to skip 30 seconds of a tape. Press up to four times in a
GIO
ME row to skip up to two minutes of a tape.
VR (1) "© TRACKING Buttons
+ When in Play or Still mode, press to adjust the tracking. Details are on page
MAGNAVOX 33.
EJECT Button
Press to eject the tape.
VCR/TV Button
Use to select the signal that your TV receives.
V VCR Position
Use to watch a tape, to watch a program while recording it, or to watch a TV broadcast using the CH(annel) Up/Down
or Number buttons.
& TV Position
Use to watch TV or to watch one program while recording another. Details are on page 20.
This remote control may or may not operate your TV or cable converter box. See “TV Code Setting” on page 36 and “Cable
Converter Box Code Setting” on page 37.
16
Display Panel
VCR Display Panel
Information about VCR operations
is displayed here.
Cassette Compartment
Insert a tape here.
те E +
Eire MEHO
6 Ew PLAY
e 9
e al E O FA, « *
77 vs
VCR Light
This light appears when the VCR
is in VCR position.
Mode Light
This light tells you the cur-
rent mode of the VCR:
REC(ord), PLAY, or PAUSE,
om we fy) LT
sa AAA ENE a
TIMER Light
This light appears when a timer
recording is programmed or is in Line Input Mode Light
progress. Details are on pages When L appears here, Line
22 - 23. Input mode has been select-
ed (you select Line Input
mode by pressing Number
buttons 0, 0; you exit Line
Input mode by using the
Number buttons to select
another channel or by press-
ing the CH(annel) Up/Down
buttons).
Cassette-Inside Light
This light appears when there is a
tape in the VCR. It blinks when a
tape is being ejected.
17
Display Panel (cont’d)
OTR Light
This light flashes when a one
touch recording is in progress.
Details are on page 21.
Wireless Remote Sensor
Receives an infrared signal from
your remote control so you can
operate your VCR from a distance.
am (®
MAGNAVOX
e 98%
TL
| REC _
| VCR |sP AM — e 7. 10
Te (LI, |_| Ll. LI Ll: Tr
|
Manor Light
Tape Speed Light This light appears when a tape
This light displays the tape speed
during recording and playback.
NOTE: Although this VCR will
play tapes recorded in LP speed,
LP will not appear on the display
panel.
location has been memorized.
Details are on page 32.
Clock/Counter/Channel Display
Each time you press the EXIT/STA-
TUS button on the remote control, the
VCR display panel will change. It
will rotate between the following three
displays: the current time (when the
clock is set); the tape counter; and the
channel number.
18
Front Panel
SEB BRR EBERRON BEN B BR EBG BBR B EDR BB SERA RE DBR RAAB BSBA BBG ORAN ASPEN CUCUTA RPI RRR RRN RRR EGER OA GORREERNOCACAND LER NNN J]
PLAY Button STOP/EJECT Button
Press to play a tape. Also, press to Press once to stop the tape. Press
release Slow, Still or Search mode again to eject the tape.
and return to normal playback (see
page 34 for details).
REW (ind) Button
POWER Button When in Stop mode, press to rewind
Press to turn the VCR power on and off. the tape at high speed. When in Play
FF (Fast Forward) Button
When in Stop mode, press to fast forward the
tape at high speed. When in Play mode,
press to fast forward the tape while the pic-
ture stays on-screen. Details are on page 34.
mode, press to rewind the tape while
the picture stays on-screen. Details
are on page 34.
y
A
/ A a,
7
/
EE MAGNAVOX | q
EE head МЫ HQ | ~~ /
POWER 7 3 EW PLAY FF
—— YCHANNELA == —
Ша EU 0:00:00.E Juil
TL zZ _1T
Front VIDEO / AUDIO Input Jacks
Connect cables coming from the video CHANNEL (Up/Down) Buttons
and audio output jacks of another VCR Press to scan through the VCR's
or a camcorder here. For details, see channels
page 24. ;
VCR/TV Button
Use to select the signal that your
TV receives.
& VCR Position REC(ord)/OTR Button
Use to watch a tape, to watcha Press once to record. Press 2 - 19
program while recording it, or times to start a One Touch
to watch a TV broadcast using ~~ Recording 30 minutes to nine
the CH(annel) Up/Down or hours long. (See page 21 for
Number buttons. details.)
© TV Position
Use to watch TV or to watch
one program while recording
another.
19
Rear Panel
ANT.(enna) IN(put) Jack
Connect your antenna or cable
here. Details are on page six.
AUDIO OUT (put) Jacks
Connect a cable from the audio
input jacks of a camcorder, another
VCR, or an audio source here.
Details are on page 24.
AUDIO IN(put) Jacks
Connect a cable from the audio
output jacks of a camcorder,
another VCR, or an audio source
here. Details are on page 24.
UN |
— 0000000000 J OO0000000 11 FA |
ANT.IN
IN—-OÙT
ADO © | G
RF OUT
[VIDEO
H3 = © © Ca
CH3/CH4 Switch
Set to channel 3 or 4 VIDEO IN(put) Jack
to use your TV with Connect a cable coming from
your VCR. D etails the video output jack of a
are on page Six. camcorder or another VCR
here. Details are on page 24.
===]
l=
|=
VIDEO OUT (put) Jack
Connect a cable coming from the
video input jack of a camcorder or
another VCR here. Details are on
page 24.
AC Power Cord RF OUT(put) Jack
Connect to a wall outlet (120 V) to Use the supplied RF coaxial
supply power to the VCR. cable to connect this jack to the
VHF/UHF combination antenna
jack on your TV. Details are on
page six.
20
Recording One Channel/Watching Another
Start a recording (see page nine).
Select the channel
you want to watch.
Press the VCR/TV button to put the VCR in
TV position. The VCR light will disappear
from the display panel.
Use the TV remote control or the TV con-
trols to select the channel you want to
watch. The channel selected with the TV
If you use a cable converter box or satellite system hookup, you may not be
able to watch one channel while recording another. See pages 40 - 43 for
details.
* If your VCR remote control operates your TV, press the TV button, then use
the CH(annel) Up/Down buttons or the Number buttons on the VCR remote
control to select TV channels. See page 36 for details.
* If you dont receive channels, repeat the steps on page six, then follow the
instructions above carefully.
controls will appear on-screen while the . |
channel you previously selected to record is: MAGNAVOX >)
being recorded. : т
: BE 0:00:00.8 5%) [<1]
: т
To return to the channel being recorded, use :
the TV remote control or the TV controls to:
select channel 3 or 4 (see page six for : 7 E E
details). Press the VCR button. Then press ; CE ran Start a
the VCR/TV button to put the VCR in VCR : ,
position. The channel being recorded will: æ O > recording.
appear on-screen. : (=)
: Oye
: ES
: To return to the
: channel being | | (4) (5) (5)
: recorded, select Le]
: channel 3or4at| | (9) @
: the TV. Press the O y
: VCR button. Then | | 00,0
: press the VCR/TV >, = =
: button to put the —MAGNAVOX
: VCRinVCR \ / Put the VCR in
: position. Remote Control TV position.
Remote Control
А
0
21
One Touch Recording
>
O
(4) VOL CH (4)
Y
EL TY e= Press the VCR button,
then use the
4) 6) (s) CH(annel) Up/Down
(9) buttons or the Number
CA buttons to select the
DOW channel you want to
Press the 28° record.
REC(ord)/OTR but- 0860
MAGNAVOX
ton 2 - 19 times to
select a recording
length and start an
OTR.
the EXIT/STATUS button.
has priority.
* To check the time remaining for an OTR after the OTR has been set, press
* To change the recording length while an OTR is in progress, press the
REC(ord)/OTR button until the desired length is displayed on-screen.
* If the preset time for a timer recording comes up during an OTR, the OTR
BES SERIES EIRP PEERAGE RODCDOCAOCRQLOCACTACRLÓCECÓORCCCORCOTCOQRPTUACÓA ADECCO DOACODRERADLACORNCLEAQEQOQRCQACQQAQNTCQQDMONSQSGACQCCOGCOOCUUPOONCCCQEOOEODTANVvA>dO
The one touch recording (OTR) function
allows you to program an immediate timed
recording 30 minutes to nine hours long
without setting the timer. Before you
begin, make sure:
hannels have been programmed.
9 The desired recording speed (SP or SLP)
has been selected with the (Tape) SPEED
button.
* There is a tape in the VCR. Make sure
the tape’s record tab is intact and the tape
is long enough to record the program(s).
@The VCR is in VCR position.
Starting an OTR
Press the VCR button, then use the
CH(annel) Up/Down buttons or the
Number buttons to select the channel you
want to record.
Press the REC(ord)/OTR button 2 - 19
times, until the desired recording length (30
minutes to nine hours) appears in the upper
left corner of the screen and on the display
panel briefly. OTR will flash on the display
panel of the VCR and REC will appear on
the display panel.
Stopping an OTR
To stop an OTR before recording is fin-
ished, press the STOP button. To cancel the
OTR but continue recording, press the
REC(ord)/OTR button until OTR changes
to REC on-screen. REC will remain on the
display panel.
22
Timer Recording
Follow the steps below to program
your VCR to record TV programs
while you're away from home. You
can program up to eight timer record-
ings. For each one, the VCR will turn
itself on, record, and turn itself off
automatically. Before you begin make
sure:
Channels have been programmed.
The clock has been set.
* There is a tape in the VCR. Make
sure the tape’s record tab is intact
and the tape is long enough to record
the program(s).
@The VCR is in VCR position.
You must do each step within 60 sec-
onds of completing the previous step.
If you don’t, you will have to start
again at step 1.
Press the MENU button to bring up the
main menu display.
TO SELECT PUSH NO. SHOWN
1 PROGRAM
2 VCR SETUP
3 TUNER SET UP
4 INPUT SELECT
5 SET CLOCK
TO END PUSH EXIT
Press the Number 1 button on the
remote control to select PROGRAM.
TO SELECT PUSH NO. SHOWN
1 ONCE
2 DAILY
3 WEE
KLY
4 PROGRAM REVIEW
TO END PUSH EXIT
Select a once, daily or weekly recording.
“Press the Number 1 button to select
ONCE. The VCR will record a TV
program on any day you choose, up to
12 months away.
“Press the Number 2 button to select
DAILY. The VCR will record every
Monday through Friday, starting at the
same time and recording for the same
length of time.
Press the Number 3 button to select
WEEKLY. The VCR will record on
the same day, at the same time, and
for the same length of time every
week.
DAILY PROGRAM (MON-FRI)
PROGRAM -12345678- | Daily
Recording
SELECT PROGRAM NUMBER | Menu
TO END PUSH EXIT Screen
Use the Number buttons (1 - 8) to select
a position in which to store the timer
recording. Flashing numbers indicate an
open position (one in which a timer
recording has not yet been stored).
NOTE: If you select a number that has
already been used to store a timer
recording, PREVIOUSLY SET PRO-
GRAM will appear on-screen for a few
seconds. Then information about the
program in that position will be dis-
played on-screen. If this happens, press
the EXIT/STATUS button twice. Then
start again at step 1.
If you are using a standard antenna
to VCR to TV hookup, enter the
channel of the TV program you want
to record.
“If you are recording from line input,
press 0, 0. A/V IN will appear on-
screen.
Tf you are recording using a cable
converter box, see pages 40 - 43.
ONE TIME PROGRAM
PROGRAM 1
CHANNEL --
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
Press two Number buttons for the hour
you want the recording to begin. Press
two number buttons for the minute(s)
you want the recording to begin. Press
1 for AM or 2 for PM. For example,
for 9:30 PM, press 09, 30, 2.
ONE TIME PROGRAM
PROGRAM 1
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
Follow the instructions in step 6 to set
the recording's stop time.
ONE TIME PROGRAM
PROGRAM 1
CHANNEL
TIME ON
TIME OFF
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
1. With the VCR on and in VCR
position, press the MENU button.
2. Press the Number 1 button to
select PROGRAM.
3. Press the Number 4 button to
select PROGRAM REVIEW. The
program with the lowest numbered
position will appear on-screen.
timer recording information for the
Checking or Clearing Timer Recordings
If there are no timer recordings set,
NO PROGRAM SET appears when
you press the Number 4 button. In
five seconds, you will return to the
previous screen.
4. Press the Number 1 button repeated-
ly to review all programmed timer
recordings. If you don’t press the
Number 1 button in 10 seconds, the
VCR will automatically display
information about the next pro-
grammed timer recording. This will
continue until all filled positions
have been displayed. Then the pre-
vious on-screen menu will appear.
. To cancel the timer recording displayed,
press the CLEAR button. You will return
to the previous menu. Press the
EXIT/STATUS button to exit.
. Repeat steps 1 - 5 to make sure you have
cleared the correct timer recording.
Press 1 to record in SP speed. Press 2
to record in SLP speed. You cannot use
the (Tape) SPEED button at this time.
ONE TIME PROGRAM
PROGRAM 1
CHANNEL 10
TIME ON 09:30 PM
TIME OFF 11:00 PM
REC SPEED SLP
SP=1 SLP=2
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
Press two Number buttons for the
month and the day you want the pro-
gram to record. For example, for July
10, press 07, 10. The day of the week
and the year will be displayed auto-
matically (you cannot program the
VCR to record more than one year in
advance).
ONE TIME PROGRAM
PROGRAM 1
REC SPEED SLP
START DATE 07/10/96
WED
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
Press the EXIT / STATUS button.
PROGRAM WAS COMPLETED /
PLEASE TURN OFF VCR FOR
TIMER RECORDING will appear on-
screen (if PROGRAM NOT COM-
PLETED appears, try again from step
1). In three seconds the on-screen dis-
play will disappear. Now, go to steps
11 and 12.
Timer Recording (cont’d)
If you want to program another timer
recording, repeat steps 1 - 10. If you
don’t want to program another timer
recording, go to step 12.
Turn off the VCR power. The TIMER
light will come on. The VCR must
be turned off for a timer recording
to take place. If you forget to turn
the VCR off, PLEASE TURN OFF
VCR FOR TIMER RECORDING
flashes on your TV screen two min-
utes before a timer recording starts.
You can remove it by pressing the
CLEAR button.
The VCR
must be off for a
timer recording
to take place!
Make sure there
is a tape in the
VCR.
Making Corrections
1. While the screen you want io
change is displayed, press the
CLEAR button until the cursor is
flashing on the item you want to
change. Then enter the correct
information.
2. Continue to do this until all infor-
mation is correct.
Note: You can exit the Program
Review at any time by pressing the
EXIT/STATUS button.
a (p=
106000600000 ..00000000450970050000005005509008 .00000000000007009005759557000805 08
VCR
| |
POWER TIMER
Button Light
POWER
Button
Button
EXIT /
STATUS
Button
Number
Buttons
—
ñ
3
;
8
de aja
Remote Control
If you leave the VCR on past the
scheduled start time of a timer
recording, you will not be prompt-
ed by the VCR again to tum the
VCR off. When you turn the VCR
off, the timer recording will not
take place.
If the preset time for a timer
recording comes up during an
OTR, the OTR has priority.
To stop a started timer recording,
press the POWER button on the
VCR or the remote control.
The VCR will turn itself off auto-
matically after a timer recording
has finished.
Please see page 38 for more notes.
24
Rerecording (Tape Duplication)
The instructions on this page show you Connections
how to copy tapes. The illustration uses
two VCRs just like yours. Different VCRs VCR 1 VCR 2
may operate differently. NOTE: Un- Playing VCR (or Camcorder) Recording VCR
(back view)
authorized recording of copyrighted televi- (back view)
—
PS es
sion programs, video tapes, or other mate -
rials may infringe on the rights of copy-
right owners and violate copyright laws.
Г] [0000000 Y
bof
AUDIO and VIDEO jacks before record-
ing using the rear AUDIO and VIDEO
IN(put) jacks.
2 — | Ele
: AUDIO
de : and AUDIO FE OUT(put)
VCR 1 will play your tape. Insert a prere- © VIDEO and Jack
corded tape in VCR 1. If the tape does not : OUT(put) From AUDIO OUT to AUDIO IN Newt
have a record tab, playback begins. If this : Tacks Jacks
: «Юте =
happens, press the STOP/EJECT button on: From VIDEO OUT to VIDEO IN
VCR 1. :
: * You can also connect audio and video
$ cables to the AUDIO and VIDEO input
: jacks on the front of VCR 2.
VCR 2 will record your tape. Insert a : * Audio and video cables are not included.
blank tape in VCR 2. Make sure the VER : Operation
power is on and the VCR is in VCR posi- :
tion. : |
Turn the TV on and put it on channel 3 or :
4, whichever channel the CH3/CH4 switch: Put a prerecorded R {
on VCR 2 is set to (see page six). : tape in VCR 1. emote
: Control RU
: : + ID Press the PLAY but-
Point the remote control at VCR 2. Press : Point the remote © (=) © ton on VCR 1 and
the VCR button, then press the Number : \ < © > the REC(ord)/OTR
buttons 0,0. L will appear on the display : control at VCR 2. DR button on VCR 2 at
panel. : Press the VCR button, YU the same time.
: then press the EE
: Number buttons 0, 0. =
Point the remote control at VCR 2. Use : a
the (Tape) SPEED button to select SP or : frog (5), a
SLE. : Use the (Tape) 7 =
: SPEED button to © 7
: select the recording ow
Press the PLAY button on VCR 1 and the : speed of VCR 2. Ne
REC(ord)/OTR button on VCR 2 at the :
same time. :
: Put a blank
: tape in VCR 2.
: VCR 2
AUDIO and VIDEO jack, rhey will amo- | § Select channel 3
an Jacks, they will auto- | -
matically have priority over the rear : or 4 at the TV.
AUDIO and VIDEO IN(put) jacks. :
Disconnect the cables from the front :
— 25
Setting Up VCR Plus+
VCR Plus+ allows you to program timer recordings. When you enter a program’s VCR Plus+ number (found in your TV guide),
the VCR automatically records that program. Follow the steps below to set up VCR Plus+.
First, fill in the boxes on this page. It will only take a few minutes, and you must do it if you want VCR Plus+ to work prop-
erly.
Since the channel numbers of the stations you receive may not be the same as the station numbers, and since channel num-
bers differ from area to area, you must program the VCR with your local channel information. To fill in the boxes, you
will need 1) a cable channel line-up list, if applicable (you can request one from your cable company), and 2) a chart that
lists VCR Plus+ guide channel numbers, which you can find in your TV guide or the TV listings of your local newspaper.
VCR Pius+
Local TV Stations Guide Channel
(call letters) Number
(GUIDE CH.)
VCR Plus+
Cable Stations Guide Channel
(call letters) Number
(GUIDE CH.)
Local Channel
Number
(USER CH.)
Cable Channel
Number
(USER CH.)
26
Setting Up VCR Plus+ (cont’d)
00700000404 000550000058 OCT CGO0 «остов етот тов
Now, compare the channel numbers
you have written into the GUIDE CH.
and USER CH. columns. You'll notice
that some stations have guide and user
channel numbers that are the same, and
other stations have channel numbers
that do not match. Where the channel
numbers DO NOT match, you must
tell the VCR the guide and user chan-
nel numbers according to the following
steps.
Press the VCR button, then press the
MENU button. Finally, press the
Number 2 button to select VCR SET
UP.
TO SELECT PUSH NO. SHOWN
1 PROGRAM
2 VCR SETUP
3 TUNER SET UP
4 INPUT SELECT
5 SET CLOCK
TO END PUSH EXIT
Press the Number 4 button to select
SET GUIDE CHANNEL.
TO SELECT PUSH NO. SHOWN
1 SET REPEAT PLAY (OFF)
2 ON SCREEN MODE
4 SET GUIDE CHANNEL
5 GUIDE CHANNEL MAP
TO END PUSH EXIT
Look at the boxes you filled in on page
25. For stations whose guide channels
and user channels are not the same,
press two Number buttons for the
guide channel and two Number buttons
for the user channel.
SET GUIDE CHANNEL
SELECT GUIDE CH. NO.
GUIDE CHIL
USER CH. +
TO END PUSH EXIT
Press the Number 1 button so your
VCR will memorize the guide channel
and user channel numbers you have
entered. Or, press the Number 2 but-
ton to quit and select another pair of
numbers.
SET GUIDE CHANNEL
TO SELECT PUSH NUMBER
GUIDE CH. 28
USER CH. 04
1 MEMORIZE
2 SELECT ANOTHER CH.
TO END PUSH EXIT
Repeat steps 5 and 6 for all the stations
on your list which have different guide
channel and user channel numbers.
Press the EXIT/STATUS button to exit.
To confirm the guide channel and user
channel numbers you have selected,
press the MENU button to bring up the
main menu display. Then press the
Number 2 button to select VCR SET
UP. Finally, press the Number 5 button
to select GUIDE CHANNEL MAP. A
list of guide channel and user channel
numbers memorized by the VCR will
appear on-screen. If there are more
than 10 pairs of numbers, press the
Number 1 button to view another
screen of numbers. Make sure these
numbers correspond to the boxes you
filled in in step 1. Then press the
EXIT/STATUS button twice to exit.
GUIDE CHANNEL MAP
END=EXIT
Remote Control
EXIT/STATUS
Button
Ра
—— MENU Button
Number
Buttons
To correct a guide channel number:
* Repeat steps 3 — 4 on this page.
* At step 3, enter the incorrect guide
channel number for both the guide
channel and the user channel. Press
the Number 1 button, then press the
EXIT/STATUS button to exit. This will
make the guide channel and user chan-
nel the same, as they were when you
received your VCR.
Repeat steps 3 — 6, this time entering
the correct guide channel and user
channel. Press the EXIT/STATUS
button to exit.
To correct a user channel number:
* Repeat steps 3 — 6 on this page
using the correct channel number.
Press the EXIT/STATUS button to exit.
Remote Control
POWER Button
| "УСК PLUS+
ENTER Button
EXIT/STATUS
Button
Number
Buttons
© ©
=
m
5
=
=
O
С
* If you enter an incorrect VCR Plus+
number in STEP 2, ERROR appears
for 4 seconds, then the on-screen dis-
play will go back to STEP 1.
Re-check the VCR Plus+ number and
enter it again.
* If ERROR appears at step 3 when you
select DAILY with the Number 2 but-
ton, this means the VCR Plus+ number
you have selected is for a program that
is broadcast on Saturday or Sunday.
The program cannot be recorded
repeatedly from Monday through
Friday.
* To quit VCR Plus+ programming at
‘any step, press the EXIT/STATUS but-
ton. The on-screen display will disap-
pear from the TV screen.
* See other NOTES about timer record-
ing on pages 22 - 23 and 38.
соотвественно вазе зе
Follow the steps below to program a
timer recording using VCR Plus+ num-
bers. Before you begin make sure:
» Channels have been programmed.
‘The clock has been set.
* There is a tape in the VCR. Make
sure the tape’s record tab is intact
and the tape is long enough to record
the program(s).
9 The VCR is in VCR position.
at the TUNER SET UP menu.
You must do each step within 60 sec-
onds of completing the previous step.
If you don’t, you will have to start
again at step 1.
ss the VCR PLUS+ ENTER button
on the remote control. The on-screen
display shown below will appear.
VCR PLUS+ PROG.
VCR PLUS IC
TO END PUSH EXIT
Use the Number buttons to enter the
VCR Plus+ number of the program
you wish to record (this number is dif-
ferent for every program, and it can be
four to eight digits long). Finally,
press the VCR PLUS+ ENTER button.
VCR PLUS+ PROG.
VCR PLUS+ 13285-
TO SET PUSH VCR+
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
© You have selected CABLE TV or TV
The VCR
must be turned off]
for a timer
recording to take
place.
Make sure there is
a tape in the
VCR.
27
Timer Recording With VCR Plus+
To record the program once, press the
Number 1 button to select ONCE. To
record the same program every day
from Monday through Friday, press the
Number 2 button to select DAILY. To
record the same program every week on
the same day (such as every Saturday),
press the Number 3 button to select
WEEKLY.
VCR PLUS+ PROG.
1 ONCE
2 DAILY
3 WEEKLY
TO SELECT PUSH NO. SHOWN
TO END PUSH EXIT
Press the Number 1 button or the
Number 2 button to select SP (Standard
Play) or SLP (Super Long Play). You
cannot use the (Tape) SPEED button at
this time.
ET
25
10:00 AM
REC SPEED AR
START DATE “07/01/96
MON.
PUSH 1=SP OR 2=SLP
TO END PUSH EXIT
Press the EXIT/STATUS button. PRO-
GRAM WAS COMPLETED /
PLEASE TURN OFF VCR FOR
TIMER RECORDING should appear
on the screen (but if PROGRAM NOT
COMPLETED appears, begin again
from step 1). After five seconds, the
on-screen display will disappear.
To program additional timer recordings
with VCR Plus+, press the VCR
PLUS+ ENTER button and repeat steps
2 to 5. When you are finished, go to
step 7.
When you have finished, press the
POWER button to turn the VCR off.
The VCR must be turned off for a timer
recording to take place. The TIMER
light will appear on the display panel of
the VCR when you turn off the VCR.
The TIMER light will flash if there is
not a tape in the VCR.
28
Channel Memory
Programming Channels
Although your VCR may automatically
memorize the channels you receive when
you turn it on for the first time, this func-
tion lets you reprogram channels.
Press the VCR button, then press the
MENU button to bring up the main menu
display.
TO SELECT PUSH NO. SHOWN
1 PROGRAM
2 VCR SET UP
3 TUNER SET UP
4 INPUT SELECT
5 SET CLOCK
TO END PUSH EXIT
Press the Number 3 button to select TUNER
SET UP.
TO SELECT PUSH NO. SHOWN
1 TV
2 CABLE TV (ON)
3 AUTO PROGRAMMING
4 ADD/DELETE CH
5 CH MEMORY REVIEW
TO END PUSH EXIT
Press the Number 1 button to select TV (if
you have an antenna) or the Number 2 but-
ton to select CABLE TV (if you have a
cable connection).
Press the Number 3 button to select AUTO
PROGRAMMING. AUTO SET PRO-
CEEDING / PLEASE WAIT will appear
on-screen. The VCR will place all the
channels you receive into its memory.
Wait for a few minutes while the VCR pro-
grams channels. When programming is
complete, AUTO SET COMPLETED will
appear on-screen. Then the programming
of the lowest channel number placed in the
УСК’: memory will appear on-screen.
Now when you press the CH(annel)
Up/Down buttons you will scan only
through channels you receive.
SSBB RRR PLEAS PREF NSRP ISR A SRB BRE R NO REE RRL P APS RI SAIS ROPERS RI NERS BINGEN BRENNER THU HTTP TESTER GEEHRTE
select TV or
CABLE TV.
Remote Control
cl
bring up the main
menu display.
O
> © ©)
Press the Number 1 (a) ve © Press the VCR but-
button or the Y y ton, then press the
Number 2 button to EE MENU button to
8H
Ce]
(9)
[=] =]
JE)
3
6
3
o
e
©
5
2
Press the Number
3 button to select
TUNER SET UP.
GO
=
В
2
2
2
OO
© CG]
:
:
5
O
©
(15
Press the Number 3
button to select
AUTO
PROGRAMMING.
Line Input mode will always be stored in the VCR's memory as channel 00
(although 00 will not appear on-screen when you press Number buttons 0, 0).
When you select channel 00 with the CH(annel) Up/Down buttons or the
Number buttons, L will appear on the display panel of the VCR.
29
Channel Memory (cont’d)
0000000705000 0000000000000 0080000400000005005050000000000009000050000000080000050000500500000000000000080008080000000800000000000000000007050000098 ..
Adding/Deleting Channels
Remote Control
Press the VCR button, then press the
MENU button to bring up the main menu
display.
Press the Number 3
button to select
Press the VCR button,
TUNER SET UP.
then press the MENU
button to bring up the
main menu display.
Press the Number 3 button to select
TUNER SET UP.
Press the EXIT/STA-
TUS button to exit.
Press the Number 4 button to select ADD/
DELETE CH.
SELECT CHANNEL NUMBER
CH—-
Press the Number 4
button to select
ADD/ DELETE CH.
SEE
5
8
=
2
=
:
ВО
Of
O O
Press the Number 1
button to add that
channel, the Number
2 button to delete that
3
8
E
5
O
©
©
TO END PUSH EXIT
(1
Use the Number channel, or the
buttons to enter the Number 3 button to Enter the desired channel number with the
Number buttons.
channel number you leave that channel
want to add or unchanged and select то MET
delete. another channel.
1 ADD
2 DELETE
3 SELECT ANOTHER CH
TO END PUSH EXIT
Press the Number 1 button to add that chan-
nel. Press the Number 2 button to delete
that channel. Press the Number 3 button to
cancel that entry and select another channel.
Press the EXIT/STATUS button to exit.
The channel you added or deleted will
appear on-screen.
Reviewing Programmed Channels
—
. Press the MENU button to bring up the main menu display.
2. Press the Number 3 button to select TUNER SET UP.
3. Press the Number 5 button to select CH MEMORY REVIEW. A list of
programmed channels will appear on-screen.
4. If all the programmed channels don’t fit on the screen, press the Number 1
button to see the remaining channels. Then press the Number 2 button to
return to the first screen of channels.
5. Press the EXIT/STATUS button twice to exit.
SOE NO SO ED OER TIRE RORINRI IRIE ONSEN Eas data sat tat satsinsttaintioeteoetaeniceatstesealtetoteetaesoteteue RI tEdItit tactics toRotoisReaRaaneee OR eIRRRICERIERAIOIOIRRIOIRRIOIPRIOROISITODDYS
30
Language/Daylight-Saving Time Selection
as... + CRECE PTECECACOTACLOACCNNCEDOCTADOICRRNOTOODONRCOQDOICAQTOCTETEOCQaCdECCK QQTÓrCRCO SAC ODECDODRNOOECECCHECOECREPOCE-PEOOCE PAD OLE ALO CAACNCCOACCLHEACOÓORTE—EREEACSmDARNO
Language Selection
Follow the steps below to change the lan-
guage of the on-screen displays.
Press the VCR button, then press the
MENU button to bring up the main menu
display.
Press the Number 2 button to select VCR
SET UP.
Press the Number 3 button to select LAN-
GUAGE.
Press the Number 1 button if you want the
on-screen displays in English. (ON) will
appear to the right of ENGLISH on-screen.
Press the Number 2 button if you want the
on-screen displays in Spanish. (SI) will
appear to the right of SPANISH on-screen.
Press the EXIT/STATUS button to exit.
Daylight-Saving Time
Selection
Follow the steps below to program the VCR
so its clock will automatically move for-
ward one hour in April and turn back one
hour in October.
Press the VCR button, then press the
MENU button to bring up the main menu
display.
Press the Number 5 button to select SET
CLOCK.
Press the Number 2 button so that (ON)
appears to the right of DAYLIGHT SAV
TIME.
Each time you press the Number 2 button,
you turn DAYLIGHT SAV TIME ON or
OFF.
Press the EXIT/STATUS button to exit.
Language Selection
Press the VCR but-
ton, then press the
MENU button to
bring up the main
menu display.
Press the EXIT/STA-
TUS button to exit.
Press the Number 1
(5) (6)
Press the Number 2 © button if you want
button to select VCR то) [о] the on-screen dis-
SETUP. [OO] | plays in English.
OO Oo Press the Number 2
O © ;
357 button if you want
the on-screen dis-
MAGNAVOX
NS plays in Spanish.
Press the Number 3
button to select
LANGUAGE.
Daylight-Saving Time Selection
|
È
ё
©
Press the EXIT/ST. Press the VCR but-
TUS button to exit. AN) ton, then press the
UU) MENU button to
% N bring up the main
ES EST
DE menu display.
Press the Number 2 (4) (3) 5)
button to select ON [9]
or OFF. fd (oe) @ | Press the Number 5
© Q y button to select SET
2.9. О CLOCK.
VCAVTV OQ 9,
О ©
MAGNAVOX
Remote Control
31
Playback Options
Repeat Playback
Follow the steps below to program the
VCR to play a tape over and over.
Remote Control
, Press the VCR button, then press the
; MENU button to bring up the main menu
Press the EXIT/STA- display. e
TUS button to exit.
Press the VCR button,
then press the MENU
button to bring up the
main menu display.
©
TO SELECT PUSH NO. SHOWN
1 PROGRAM
2 VCR SET UP
3 TUNER SET UP
4 INPUT SELECT
5 SET CLOCK
TO END PUSH EXIT
Press the Number 1
button to select SET Press the Number 2
button to select VCR
5000 ha
ADO
=) E) CA
E [e] [>)(e]
REPEAT PLAY dv
(ON). 556 SET UP. Press the Number 2 button to select VCR
“a SET UP.
Q O ©
o TO SELECT PUSH NO. SHOWN
MAGNAVOX 1 SET REPEAT PLAY (OFF)
2 ON SCREEN MODE
NGUAGE
3 LANGUAG
4 SET GUIDE CHANNEL
5 GUIDE CHANNEL MAP
TO END PUSH EXIT
Press the Number 1 button. (ON) will
appear to the right of SET REPEAT
+ PLAY.
Each time you press the Number 1 button,
в you turn SET REPEAT PLAY ON or OFF.
O SELECT PUSH NO. SHOWN
SET REPEAT PLAY (ON)
ON SCREEN MODE
LANGUAGE
SET GUIDE CHANNEL
GUIDE CHANNEL MAP
TO END PUSH EXIT
Press the EXTI/STATUS button to exit.
Now, when a tape has finished playing, the
VCR will rewind it and start playback
again. This will happen until you press the
STOP button or until the tape has played 20
times. The Mode Light on the display panel
will flash PLAY the entire time (even
when the tape is rewinding).
TV programming will appear while the
tape is rewinding.
The VCR will stay in Repeat Play mode until you cancel Repeat Play mode.
To do this, follow steps 1 - 2 above. At step 3, press the Number 1 button to
select SET REPEAT PLAY (OFF). Press the EXIT/STATUS button to exit.
The tape counter will not operate when the VCR is in Repeat Play mode.
»
C8008 SS80220REBBARBG RP EPLARIROPRRPER OER RIO ORSSdabBebedbreEneS
32
Playback Options (cont’d)
ELO CCCRCACCOCACHACRECPECOCACODCDEOCOOTHBDACACRECAOTO AR NÓACGROACGGECOAOGAVAACOHCACOECFCAATEGASCEDODO SO DTACBVETEHADKASORCOACATECUIAMETEZDdORESADUCEdO ose
Using the Tape Counter VCR
Follow the steps below to reset the tape
counter to zero at a tape location you want
to refer to later.
y (<b> MAGNAVOX
Efren: MENO
POWER
[16 85°
UU
Play, fast forward or rewind a tape to the
== 10:08:00, 1 00 ” a »
location that you would like to refer to later.
Stop the tape. : ! J
Press the EXIT/STATUS button. The status :
display, which includes the tape counter, : Play, fast forward, or
will appear on-screen. : rewind a tape to the
: location that you
: would like to refer to
: later. Stop the tape.
While the tape counter is still on-screen, :
press the CLEAR button to reset the tape :
counter to zero. :
: When in Stop mode, A
: press the 7
: REWIND/SEARCH TR
: button or the FAST (3) Press the EXIT/STA-
: FORWARD/SEARCH TUS b .
: 7) 6) © utton to bring
+ button to return to the the status displ
While the tape counter is still on-screen, : Es up the status display.
: previous/next place the
press the MEMORY button to memorize the : t € ‘ [tod {0]
tape location. The Memory Light will : ape counter was Iesc О
appear on the display panel. : to zero. 568
: О © ©,
: о © © Press the CLEAR
: Press the MEMORY > button to reset the
: button to memorize ST) tape counter to zero.
: the tape location. Remote
Control
000000050008 0000000050005 08 .:.0:.0..0...004.07040700000080000530070#&0
To return to the previous point at which the
tape counter was reset to zero: when in Stop
mode, press the REWIND/SEARCH button.
To return to the next point at which the tape
counter was reset to zero: when in Stop
mode, press the FAST FORWARD/
SEARCH button. The tape will go to the
point at which the tape counter is set to
zero, then stop. Press the PLAY button to
watch the tape.
* You may only set the tape counter to zero at one location at a time. If you try
to set a second tape counter location to zero, the previous tape counter to
zero setting will be erased.
* To erase the tape counter memory, press the MEMORY button. The Memory
Light will disappear from the display panel.
* The tape counter memory does not operate if SET REPEAT PLAY is tumed
ÓN.
Press the PLAY,
STOP, POWER or
REC(ord/OTR
button.
33
Playback Options (cont’d)
Remote Control
Use the Number buttons to
enter the desired tape
counter location number.
Press the GO-TO button.
Using the Go-To Feature
Follow the steps below to program the
VCR to go to a place on a tape with a spec-
ified tape counter location number.
While in Stop mode, press the GO-TO but-
ton to bring up the display shown below.
NOW 1:00:00
GOTO ——-:
Within 10 seconds, use the Number buttons
to enter the desired tape counter location
number. For example, to go to tape counter
location number 1:20:00, press Number
buttons 1, 20, 00. NOTE: If the desired
tape counter number has a minus (—)
before it, enter the minus by pressing the
CH(annel) Down button. Press the
CH(annel) Up button to remove the minus.
NOW 1:00:00
GOTO 1:20:00
Press the PLAY, STOP, POWER or
REC(ordYOTR button. The VCR will fast
forward or rewind the tape to the selected
tape counter location. Then, depending on
Which button you pressed, it will either
begin playback, stop, turn itself off, or start
recording.
Button Pressed VCR Action
PLAY Begin playback
STOP Stop
POWER Turn off
REC(ord)/OTR Begin recording
34
Playback Options (cont’d)
Forward and Reverse Searching F.(rame)
ADV(ance) Remote Control
8 When in play mode, press and release the FAST FORWARD/SEARCH but-
ton or the REWIND/SEARCH button. A fast forward or reverse picture PLAY Button
search will begin. In SP, search speed is seven times the normal playback
speed. In SLP, search speed is 21 times the normal playback speed. To PAUSE
return to playback, press the PLAY button. Button
8 Or, press and hold the FAST FORWARD/SEARCH button or the REWIND/ ET)
REWIND/SEARCH button. In SP, search speed is seven times the normal SEARCH мы a
playback speed. In SLP, search speed is 15 times the normal playback O |
speed. When you release the button, normal playback will resume. Button © que
STOP
Button [6]
FAST FOR- a
Viewing a Still Picture WARD EE
/SEARCH OU
Button 9.9 G
When in Play mode, press the PAUSE button. A still picture (frozen image) 560
will appear on-screen. VAR.(iable)
SLOW
Buttons
To advance the still picture frame-by-frame, press the F.(rame) ADV (ance) but-
ton. SLOW —
Button
To release the still picture and return to normal playback, press the PAUSE but-
ton again or the PLAY button.
Viewing a Slow Motion Picture
When in Play mode, press the SLOW button. The tape will
play in slow motion.
The speed of slow motion playback can be changed using the
VAR. (iable) SLOW buttons.
To release Slow mode and return to normal playback, press
the PLAY button.
* During Search, Slow and Still modes,
there will be no sound.
* Slow and Still modes automatically
switch to Stop mode after five minutes
to protect the VCR and the tape from
damage.
* In Search mode, noise bars will appear
On-screen.
UOLOCOCOBCTOACCTOTCCCOCOATCORRAOCAOCORECROCLOCOATEBBABLACRCECCORNBBCCALOCAROCTDTOORORACECBATQAROCERCOUTORCCERAPOTECTOOCOCRTHCHTUTOCITCDCSTANTaCCHSCETANAsCECOONACTTTANTESS
35
Playback Features
Remote Control
©
Button
a
3000 BAR)
306 06D
ae
oooO
eee
gig oe
:
3
2
— TRACKING
Buttons
(1
The following playback features will always operate:
Automatic Playback
When you put a tape in the VCR, the power will come on automatically. If the
tape’s record tab is missing, playback will begin.
Automatic Rewind
When a tape is played, fast forwarded, or recorded to its end, the VCR will
rewind the tape, then go into Stop mode. If the Memory Light appears on the
front display panel, the tape will stop at OHOOMOOS on the counter.
Memory Rewind, Power Off
When the POWER button is pressed while the VCR 1s rewinding a tape,
REWIND—POWER OFF will appear on-screen. When the tape has finished
rewinding, the VCR will turn itself off. If the Memory Light appears on the front
display panel, the tape will stop at CHOOMOOS on the counter and the VCR will
turn itself off.
Tape Eject
A tape can be ejected with the VCR power on or off (but the VCR must be
plugged in).
Auto Tracking
The VCR has automatic tracking, which continually adjusts tracking to give you
the best possible picture quality. With some recordings, however, you may get a
better picture using the manual tracking controls (see below).
Manual Tracking
To adjust the tracking manually, press the TRACKING buttons on the remote
control.
NOTES:
» You can adjust tracking manually during normal and slow motion playback.
* You can use the TRACKING buttons to remove jitter in a still picture.
* You can return to the Auto Tracking by pressing the CHANNEL Up/Down but-
tons on the VCR at the same time.
* Tracking is returned to the Auto Tracking whenever a tape is inserted.
36
TV Code Setting
14.......... “.0.0:0.0090900e00050500008 ....040500404000000000007070000000400000000200000008 200000020000000000000009009000000000090407700000 000505000: 088
Your VCR remote control may operate
your TV.
Point the remote controi at your TV. Press
the TV button, then press the POWER but-
ton. If your TV comes on, try the
CH(annel) Up/Down buttons. If your TV
doesn’t come on, or if the CH(annel)
Up/Down buttons don’t work, go to step 2.
If your TV does work, you're finished.
BEDE h
Cl EQ
BAND oid
2)
| a
Find the brand of your TV on the list at the
right and remember the two-digit number (о)
to the right of it. qu ©
MUTÉ © a
e VCRTY EJECT o
Press the MUTE button, then press the TV О © ©
button. Then use the Number buttons to
enter the code for your TV. For example, if
you have a Zenith TV, press Number but-
tons 1, 5.
(1
О
Try step 1 again. If the remote control
works your TV, you're finished. If the
remote control still doesn’t work your TV,
try another code.
Find the brand of
your TV on this list
and remember the
two-digit number to
the right of it.
There is no
guarantee that the
remote control
Will work your
TV.
Press the TV button, then press the
POWER button, CH(annel) Up/Down but-
tons, and VOL(ume) buttons to see if the
remote control operates your TV. If it does,
stop. If it doesn’t, go to step 2.
Press the MUTE button, then press the TV
button. Then use the Number buttons to
enter the code for your TV.
TV CODES
MAGNAVOX . .. 01
MAGNAVOX ...02
MAGNAVOX ... 03
EMERSON ....14
GOLDSTAR. ... 04
HITACHI
MITSUBISHI ... 13
PANASONIC ...07
PANASONIC ...17
PHILIPS. ...... 01
RCA ......... 10
SAMSUNG ....18
SANYO ....... 11
SHARP ....... 16
SONY ........ 09
TOSHIBA. ..... 08
ZENITH....... 06
ZENITH....... 15
* Although the remote control that comes with your VCR will work most
Magnavox TVs, as well as many TVs sold under other brand names, it is pos-
sible that the remote control will not operate your TV.
* If you had to program the remote control to operate your TV, whenever you
replace the batteries in the remote control, you will have to program the
remote control again.
* If you have a PHILIPS TV (TV code 01), you can use the remote control to
operate other TV functions. Refer to the table at the right or read your TV
owner's manual.
TY functions
Remote control
TV MENU MENU button
MENU UP PLAY button
MENU DOWN | STOP button
PLUS(+) Fast Forward button
MINUS(-) Rewind button
EXIT/STATUS | EXIT/STATUS button
100 100 button
= | 37
Cable Converter Box Code Setting
Your VCR remote control may operate Remote Control
your cable converter box.
Press the CBL button, then press the
POWER button and the CH(annel)
Up/Down buttons to see if the remote con-
trol operates your cable converter box. If it
does, stop. If it doesn’t, go to step 2.
Point the remote control at your cable con-
verter box. Press the CBL button, then the
POWER button. If your cable converter
box comes on, try the CH(annel) Up/Down
buttons. If your cable converter box does
not come on, or if the CH(annel) Up/Down
buttons don’t work, go to step 2.
Press the MUTE button, then press the CBL
button. Then use the Number buttons to
| enter the code for your cable converter box.
Find the brand of your cable converter box
on the list at the right and remember the
two-digit number to the right of it. Q JU
$00
53 CABLE CONVERTER BOX CODES
O Bp © HAMLIN ....... i 21
Press the MUTE button, then press the
CBL button. Then use the Number buttons
to enter one of the codes for your cable
converter box. For example, if you have a
Zenith cable converter box, press Number
buttons 1, 3.
c
[T1
=
D
O
Г
о
2
Find the brand (07. |. GP 16
OAK «ee 17
Try step 1 again. If the remote control of your cable | qa NN. 18
works your cable converter box, you're converter box | PANASONIC ..........1212220 0041100 19
finished. If the remote control still doesn’t on this list | PANASONIC ......................... 20
work your cable converter box, try another an d remember PIONEER .......... citi. 11
code. | PIONEER... ae 6 12
the two-digit | SCIENTIFIC ATLANTA .............—..... 08
number to the SCIENTIFIC ATLANTA .............e.... 09
rioht of it SCIENTIFIC ATLANTA . ................. 10
g "| TOCOM ......... e aaoae arenas 23
. TOCOM -............. e erererecCreoo o. 24
There 1s no TOCOM ............. armar eco 25
TOCOM -...........e.e.ssrecieererarc. 26
ZENITH ........... iio. 13
guarantee that the ZENITH ...... iii. 14
ZENITH .......... iii, 15
remote control
Will work your
cable converter
box.
* It is possible that the remote control will not operate your cable converter
box.
* If you had to program the remote control to operate your cable converter
box, whenever you replace the batteries in the remote control, you will have
to program the remote control again.
38
Specifications/Notes
Specifications
Video Heads
Four-heads
Video Signal
EIA standards; NTSC color
Antenna
VHF/UHF — 75 ohm external antenna ter-
minal
VHF Output Signal
Channel 3 or 4 (switchable)
75 ohms unbalanced
Power Requirement
120V AC; 60 Hz
Power Consumption
19W
Operating Temperature
41°F (5°C) to 104°F (40°C)
Relative Humidity
10% to 80%
Weight
7.3 65. (3.3 Кд.)
Dimensions
14-3/16” (W) x 3-3/4" (H) x 10-11/16” (D)
(360 mm x 94 mm x 271 mm)
Tuner Broadcast Channels
VHF 2-13, UHF 14-69
CATV Channels
Midband: À — 1
Superband: J - W
Hyperband: A-5 — A-1
Special Channel: 5A
Ultraband: 37 — 94, 100 — 125
NOTE: Designs and specifications are
subject to change without notice.
A оз оов тва соовосвоо вече оочвв ест оовотвоо весов ововооооотчесовевовоооосео
Hooking Up Your
VCR
If the reception on all channels is
poor, you may need to tune your TV
set again.
Timer Recording
» If the power fails, programmed
timer recordings may be lost. If
programmed timer recordings are
lost, — — : — — should appear on
the display panel. But, even if
you do not see this indication,
and the VCR appears to operate
normally, check programmed
timer recordings.
It is best to finish programming a
timer recording at least five min-
utes before the recording is
scheduled to begin.
If two timer recordings overlap,
the program with the earliest start
time will have priority. The next
program will start only after the
first program has been recorded.
If the VCR power is turned off
and there isn’t a tape in the VCR,
the TIMER and Cassette-Inside
lights will blink.
* Tf the record tab on a tape is miss-
ing, the VCR will eject the tape.
The TIMER and Cassette-Inside
lights will blink.
12 PM is noon; 12 AM is mid-
night.
Satellite Hookups
» Watching one TV channel while
recording another may not be
possible if you have a satellite
hookup.
* You may have to set your TV to
channel 3 or 4, then make your
channel selections at the satellite
converter box.
Line Input
If you accidentally enter Line Input
mode, use the CH(annel) Up/Down
buttons or the Number buttons to
select another channel.
Daylight-Saving Time
When automatic Daylight-Saving
Time is set, the clock will change
automatically as follows: on the
first Sunday in April, from 2:00 AM
to 3:00 AM; on the last Sunday in
October, from 2:00 AM to 1:00 AM.
* During the April time change, a
timer recording programmed to
start between 2:00 AM and 2:59
AM will not record. A timer
recording programmed to end
between 2:00 AM and 2:39 AM
will end when the clock moves
forward (2:00 AM).
* During the October time change,
a timer recording cannot be start-
ed between the second 1:00 AM
and 1:59 AM.
39
Specifications/Notes (cont’d)
E ECOECETONCOERTOERTEECETCOCOCGCSTCQACRCCPTECAQDOCQQTDROACHU ENOCDEAQCENSCRANARNEOACOOECRNDACTRLECCACEEACRREPTAERECERCLCQEDODEPCCQOCQACONACCOOC OQNRTEROCODN SO
40
Other Hookups
Antenna/Cable to VCR to TV Hookups
Disconnect the antenna or cable from your
TV (to avoid confusion, label all cable ends
and jacks on the TV before disconnecting
anything).
Connect the antenna or cable to your VCR.
COMBINATION
— VHF/UHF SYSTEM
E-Type Connector VAR
or MONIODDIO ] =
—— —
| | o sal
o
o
— ANT(enna)
— 3 — ог — IN(put) Jack
(in from antenna Or cable)
Transformer 1 eN ~ 7
(not supplied) 00] OR - T
SEPARATE VHF/UHF | |
SYSTEMS COMBINED |
" e UHE/VHF Band Mixer [AUDIO © ©
qe (not supplied) ЕО) RF OUT |
. => CH3_CHA4 JO,
RF OUT(put) Jack
- (out to TV)
CABLE
` Cable Input
1
Cable
B Converter Box
e nn
Cable Input | 43) A) >
Other Hookups (cont’d)
Select channel 3 or 4 at the back of the
VCR.
Connect your VCR to your TV, using only
one of the connections shown below.
Back of TV
(example only)
— VHF or CABLE [Fo
If you have a UHF-only
| A antenna system: Even if you
only plan to play tapes and
view/record UHF channels,
you still need to make one of
the combination UHF/VHF
connections shown. This is
DD because when your VCR
RF Coaxial Cable
(supplied)
operates, it sends VHF sig-
— CABLE ONLY Cable nals to the TV across the RF
Converter Box coaxial cable.
EE 5 You may connect the cable
vr converter box two different
Da ways. See pages 42-43
before choosing how to con-
Back of TV (example only) | ect the cable converter box.
r-=-------
RF Coaxial Cable Owe
(supplied)
UHF/VHF Band Separator Que 1
(not supplied) | | loca |
1 wu
{
С
RF Coaxial Cable
(supplied)
‘неее Zn
pL
— 75-300 ohm Transformer
(not supplied)
| UHF/VHF Band Separator (not supplied)
42
Other Hookups (cont’d)
With a Converter/Descrambler Box
Cable Converter Box
OUT
IN ANT.(enna) Back of TV
IN(put) TITS >
Jack |
RF OUT(put) Jack |
— |
Cable Input ;
RF coaxial cable TV Antenna
LL: . . Panel
With this connection, you can record and view
any channel, including scrambled channels.
However, channel selections must be made at
the cable converter box. This means that:
RF coaxial cable
Recording and Viewing a Scrambled
or Unscrambled Channel
€ Timer recordings are programmed differ-
ently than shown on pages 22 - 23.
* You can only program a timer recording
for one channel at a time.
When you are prompted to enter the
channel you want to record, select chan-
nel 3 or 4 (whichever 1s the output
channel of your cable converter box).
Set your cable converter box to the
channel you want to record.
Leave the cable converter box on while
you are recording.
With the VCR on and in VCR position, use the CH(annel)
Up/Down buttons to set the VCR to the output channel of the
cable converter box (channel 3 or 4).
Adjust the CH3/CH4 switch on the back of the VCR accord-
ingly.
a
.
.
a
.
"
ГЛ
.
.
.
+
.
-
.
.
=
+.
.
+
.
.
*
.
>
®
e
>
.
.
e
.
.
a
.
.
a
Set the TV to the same channel to which you set the VCR.
€ You cannot view a channel other than the
one you are recording (the instructions on
page 20 do not work with this hookup).
Select the channel you want to record at the cable converter
box.
Watching TV With the VCR Off
© ‘You cannot program channels with this
hookup (as discussed on pages 7 and 28).
: Use the TV controls to set the TV to the same channel as the
. output channel of the cable converter box.
Use the cable converter box controls to select the channel you
want to watch.
0000000005000 04000000000000005009000905000004000000000405000008
* To do a timer recording with this hookup, see “Timer
recordings are programmed differently...” above left.
* The cable converter box must be on during recording.
43
Other Hookups (cont’d
With a (VCR to TV) Converter/Descrambler Box
This is an alternative to the connection shown on page 42. It allows you to program an unattended timer
recording of more than one unscrambled channel and to watch one channel while recording another.
| (00000000 )
Cable Input <
aa _—— |
RF OUT(put) Jack =
Recording One Channel/ Playing a Tape
Watching Another
Put the VCR in VCR position.
With the VCR in VCR position, use the CH(annel) Up/Down
buttons to select the channel you want to record.
Start the recording.
Use the TV controls to put the TV on the same channel as the
output channel of the cable converter box.
Put the VCR in TV position. |
Make sure the cable converter box is on the same channel as
the VCR CH3/CH4 switch.
Use the TV controls to put the TV on the same channel as the
output channel of the cable converter box.
Select the channel you want to watch at the cable converter
box.
» Use the CH(annel) Up/Down buttons to select the
channel being recorded, even when doing a one
touch recording.
» You cannot record scrambled channels with this
connection.
* This connection may not work with your cable
system.
44
Before Requesting Service
60.1... #........ +00500000009098090000505000000 0000000709 00200500008 ссора 0000000000090 005000500550550580008 сочтете зов
If you are having problems with your VCR, check the following list of problems and possible solutions before requesting ser-
vice. You may be able to solve the problem yourself.
Power
No power
Power failure
Recording/Playback
A TV program cannot be recorded.
The VCR will not perform a timer
recording.
There is no playback picture, or
the playback picture is noisy or
contains streaks.
During special effects playback,
the picture is noisy or contains
vertical jitter when using a TV
with an automatic vertical hold
control.
The top of the playback picture
waves back and forth excessively.
Remote Control
The VCR cannot be controlled with
the remote control.
Number buttons won’t work for
channels above 69.
(continued on page 45)
000000000000 00
*
Make sure the power plug is completely connected to an AC (alternating current)
outlet.
Make sure the power is turned on.
Follow the steps on page seven to select a language and program channels, if
prompted to do so; then follow the steps on pages 10 - 12 to reset the clock.
Check the connections between the VCR, your TV, and the antenna/cable (page
six).
Make sure the band selected (VHF/UHF) matches your antenna/cable system.
Make sure the tape has a record tab (page five).
Make sure the recording start and stop times are set correctly (pages 22 - 23).
Make sure there is a tape in the VCR.
Make sure the tape has a record tab.
Make sure the VCR power is off.
Make sure the clock is set (pages 10 - 12).
The VCR may not perform or continue a timer recording if a power interruption
of more than three minutes occurs during the timer recording, even if the power
comes back on.
Make sure the TV is on the same channel as the VCR’s CH3/CH4 switch (page
SIX).
Make sure the VCR is in VCR position (pages 15, 16 and 18).
Make sure channel 3 or 4 is properly adjusted.
Adjust the tracking (page 35).
Set the TV's vertical hold control to manual, then adjust.
Because the VCR playback signal is not as stable as an off-the-air TV signal, the
top of the TV screen may waver during playback. To stop this, slowly turn the
horizontal hold control on the TV. If the TV does not have a horizontal hold con-
trol, or if adjusting the control does not help, contact your TV service center.
Aim the remote control directly at the VCR’s remote sensor (page five).
Remove all obstacles between the remote control and the VCR (page five).
Inspect and/or replace the batteries in the remote control (page five).
Press the VCR button, then try the other buttons.
Select CABLE TV from the tuner set up display (page 28) and let the
VCR program the channels.
center.
Periodic maintenance is required to maintain your VCR's continued excellent performance. The video heads eventually will
require cleaning or replacement. Cleaning or replacement of the video heads should be performed by an authorized service
45
Glossary
(continued from page 44)
Miscellaneous
TV programs cannot be watched
normally.
Six).
Tape can’t be inserted.
the tape.
on the VCR.
into the VCR.
Tape cannot be removed.
outlet.
The VCR ejects the tape when the
REC(ord)/OTR button is pressed or
when the VCR power is turned off
to set a timer recording.
The motor (cylinder) rotates even
when the VCR 1s in Stop mode.
Channels above 13 cannot be
received. :
Put the VCR in TV position (pages 15, 16 and 18).
Check the connections between the VCR, your TV, and the antenna/cabie (page
Insert the tape window side up, with the record tab facing you.
If a timer recording is set, the tape must have a record tab or the VCR will eject
Make sure a tape isn’t already in the VCR by pressing the STOP/EJECT button
Gently push the center of the tape as you put it in the VCR. Never force a tape
Make sure the power plug is completely connected to an AC (alternating current)
You have set a timer recording. Turn the VCR power on, then eject the tape.
Be sure to put a tape in for the timer recording.
Make sure the tape has a record tab (page five).
To enable the quick play mechanism, the cylinder will rotate for about five
minutes. This is normal.
Select CABLE TV from the tuner set up display (page 28) and let the VCR
program the channels.
Glossary
AUDIO IN(put)/OUT (put) Jacks: jacks located on the front
and back of the VCR which are used to record audio from
another source (input) or send audio to another source (output).
Auto Programming: process in which the VCR scans all
available channels and places the ones you receive in its mem-
ory. Then, when you press the CH(annel) Up/Down buttons,
you only scan through channels you receive.
Bands: settings that allow you to tune channels.
* Antenna — VHF (very high frequency; channels 2 - 13) and
UHF (ultra high frequency; channels 14 - 69).
* Cable — all standard channels can be received without a
cable converter box.
Dubbing: copying a tape using a second VCR.
Frame: a single still picture.
HQ: high quality; a feature in the VCR circuitry which pro-
vides enhanced picture detail.
Matching Transformer: an adapter, used primarily on non-
cable TVs, which has a “screw on” connector on one end and
two flat prongs on the other end.
Mode: a VCR operation.
OTR: one touch recording; programming a timed recording
that starts immediately and records for 30 minutes to nine
hours, whatever you specify.
Remote Control: the small electronic unit that came with your
VCR; allows you to operate your VCR from a distance.
Special Effects: forward and reverse searching, viewing a still
or slow motion picture.
Separator: an adapter used to separate VHF and UHF signals
when connecting the TV to the VCR.
Tape Speeds: how fast the tape travels during a recording or
playback.
* SP (standard play) — fastest tape speed (recording time for a
T120 tape is approximately two hours); best picture quality.
* LP (long play) — average tape speed; available for play-
back only.
» SLP (super long play) — slowest tape speed (recording time
for a T120 tape is approximately six hours).
VCR: video cassette recorder.
VIDEO IN(putYOUT(put) Jacks: jacks located on the front
and back of the VCR which are used to record video from
another source (input) or send video to another source (output).
LIMITED WARRANTY
VIDEO CASSETTE RECORDER
90 Days Free Labor
One Year Exchange Warranty on Parts
This product must be carried in for repair.
WHO IS COVERED?
You must have proof of purchase to receive warranty service.A sales
receipt or other document showing that you purchased the product
is considered proof of purchase.
WHAT IS COVERED?
Warranty coverage begins the day you buy your product. For 90 days
thereafter, all parts will be repaired or replaced, and labor is free.
From 90 days to one year from the day of purchase, all parts will be
repaired or replaced, but you pay for all labor charges. After one year
from the day of purchase, you pay for the replacement or repair of
ali parts, and for all labor charges.
All parts, including repaired and replaced parts, are covered only for
the original warranty period. When the warranty on the product
expires, the warranty on all replaced and repaired parts also expires.
WHAT IS EXCLUDED?
Your warranty does not cover:
* labor charges for installation or setup of the product, adjustment
of customer controls on the product, and installation or repair of
antenna systems outside of the product.
* product repair and/or part replacement because of misuse, acci-
dent, unauthorized repair or other cause not within the control
of Philips Consumer Electronics Company.
« reception problems caused by signal conditions or cable or anten-
na systems outside the unit.
* a product that requires modification or adaptation to enable it to
operate in any country other than the country for which it was
designed, manufactured, approved and/or authorized, or repair of
products damaged by these modifications.
* incidental or consequential damages resulting from the product.
(Some states do not allow the exclusion of incidental or conse-
quential damages, so the above exclusion may not apply to you.
This includes, but is not limited to, prerecorded material, whether
copyrighted or not copyrighted.)
* damage caused by the use of non-VHS tapes or tapes that have
not been tested and labeled for use in two, four, six and eight
hour VHS recorders.
* a product that is used for commercial or institutional purposes
(including but not limited to rental purposes).
WHERE IS SERVICE AVAILABLE?
Warranty service is available in all countries where the product is
officially distributed by Philips Consumer Electronics Company. In
countries where Philips Consumer Electronics Company does not
distribute the product, the local Philips service organization will
attempt to provide service (although there may be a delay if the
appropriate spare parts and technical manual(s) are not readily avail-
able).
MAKE SURE YOU KEEP...
Please keep your sales receipt or other document showing proof of
purchase. Attach it to this owner's manual and keep both nearby. Also
keep the original box and packing material in case you need to
return your product.
BEFORE REQUESTING SERVICE...
Please check your owner's manual before requesting service.
Adjustments of the controls discussed there may save you a service
call.
TO GET WARRANTY SERVICE IN U.S.A.,
PUERTO RICO OR U.S. VIRGIN ISLANDS...
Take the product to a Philips factory service center (see enclosed
list) or authorized service center for repair.When the product has
been repaired, you must pick up the unit at the center. Centers may
keep defective parts.
(In U.S.A, Puerto Rico and U.S. Virgin islands, all implied warranties,
including implied warranties of merchantability and fitness for a par-
ticular purpose, are limited in duration to the duration of this
express warranty. Because some states do not allow limitations on
how long an implied warranty may last, this limitation may not apply
to you.)
TO GET WARRANTY SERVICE IN CANADA...
Take the product to a Philips consumer service center (listed below),
self-servicing dealer or authorized service depot.
Philips Electronics Ltd.
601 Milner Avenue, Scarborough, Ontario, MIB 1M8
(416) 292-5161
4977 Levy Street, St. Laurent, Québec, H4R 2N9
(514) 956-0120
1741 Boundary Road, Vancouver, B.C.,V5M 3Y7
(604) 294-3441
(In Canada, this warranty is given in lieu of all other warranties. No
other warranties are expressed or implied, including any implied
warranties of merchantability or fitness for a particular purpose.
Philips is not liable under any circumstances for any direct, indirect,
special, incidental or consequential damages, howsoever incurred,
even ¡f notified of the possibility of such damages.)
REMEMBER...
Please record the model and serial numbers found on the product
below. Also, please fill out and mail your warranty registration card
promptly. It will be easier for us to notify you if necessary.
MODEL #
SERIAL #
Philips Service Company, P.O. Box 555, Jefferson City, Tennessee 37760,
(423) 475-8869
EL4946E006 / MAC 4103 / 1-96
ac power Cord .................. 19
ACCESSONES ........... ree. 48
audio input/output jacks ....18, 19,24
automatic
playback .................. 35
rewind .................... 35
batteries ....................... 5
before requesting service ....... 44-45
cable converter box
code setting ................ 37
connections ............. 40-43
cassette-inside light ............. 16
cassette (also see tape)
compartment ...........e..o 16
channel 3/4 switch ............... 6
channel
above 100 ................. 14
adding .................... 29
deleting ................... 29
MEMOTY ocre. 28-29
programming ............. 7,28
TEVIEWIN ................. 29
up/down buttons ......... 14, 18
clearbutton ................... 15
clock
autoclock ............... 10-11
manual clock ............... 12
code setting
cable converter box .......... 37
Va 36
connections ............... 6, 40-43
contents, tableof ................ 4
controls
remote ................. 14-15
VEL ite 16-19
counter only mode .............. 13
daylight-saving time .......... 30, 38
display panel ................ 16-17
duplication .................... 24
eject button ................... 15
erase protection ................. 5
exit/status button ............... 14
f.adv button ................... 14
fast forward button .............. 18
fast forward searching ........... 34
fast forward/search button ........ 15
frontpanel .................... 18
glossary ...................... 45
go-tobutton ................... 14
go-tofeature ................... 33
hookups
basic .............. LL. 6
other ................... 40-43
language selection ............ 7, 30
line input
mode .................. 24. 38
mode light ................. 16
longplay ...................... 5
Ip... 2224111 L Lee Lee Le ea eee 5
memory
button .................... 15
rewind, power off ........... 35
menubutton ................... 15
mode light .................... 16
mute button ................... 14
Notes . ...... viii... 38-39
number buttons . ................ 14
on-screen
displays ..........eeecrereo. 13
off mode .................. 13
onmode .................. 13
one-touch recording ............. 21
otr
light. ..................... 17
pause button ................... 15
playback
features ................... 35
options ................. 31-34
playbutton ................. 14, 18
playing . ....................... 8
power button ............... 14, 18
rearpanel ..................... 19
rec{ord)/otr button ........... 14, 18
recording
basic ...................... 9
one channel/watching another . .20
remote
control
buttons ............. 14, 15
using ....... ..emenareoe. 5
sensor © tut teeter eee nnn. 5,17
repeat playback ................ 31
rerecording .......... —.—._.e creo. 24
reverse searching ............... 34
rew(ind)button. . ............... 18
rewind/search button ............ 14
rf coaxialcable ............ 6, 40-43
rf output jack .................. 19
safety precautions . ............... 3
satellite hookups ................ 38
searching ..................... 34
skip search button .............. 15
slow
button .................... 14
motion . ................... 34
SID. . 220020411011 La Lane 5
Des eK RR Е вввене. 5
standard play ................... 5
status display .................. 13
47
Index
still picture .................... 34
stopbutton .................... 15
stop/eject button ................ 18
super long play ................e. 5
tape
counter ................... 32
duplication ................ 24
eject Lo. 35
speed .......... 0.00... 5
speed light ................. 17
table of contents ................. 4
timer
27 к еек к вне. 16
recording
checking .............. 22
clearing ................ 22
notes . ................. 38
programming ......... 22-23
reviewing .............. 22
tracking ...................... 35
tv
button .................... 14
codesetting ................ 36
controls ................... 36
hookup ............... 6, 40-43
position ................ 15, 18
ver
button .................... 14
light... .................... 16
plus+ .................. 25-27
position ................ 15, 18
ver plus+
setting ................. 25-26
timer recording ............. 27
ver/tv button ................ 15, 18
video
input/output jacks ..... 18, 19,24
tapes ........._resrrerecev. 5
Check to be sure the items on this page are packed
with your VCR. These accessories are provided to
help you use or set up your VCR.
4835 218 37175
One-Piece Wireless Remote Control
With 2 “AAA” Batteries (4835 138 17001)
4835 321 27302
One-Piece RF Coaxial Cable, 75 ohm
If any of these items are not included, or if you need
to replace an item, contact Philips Service Company
at the address below.
Philips Service Company
P.O. Box 967
Greeneville, TN 37744-0967
Or, call 1-800-851-8885.
187521E001
VCR MAC4375
PU36278-175
a: