HPE Shell and Utilities Open System Services Reference manual

PDF
Dokument
Annons
Open System Services
Shell and Utilities
Reference Manual
Abstract
This manual documents the HPE NonStop Open System Services (OSS) shell
and utilities. It is written for general users, programmers, system administrators,
and operators.
Product Version
N.A.
Supported Release Version Updates (RVUs)
This manual supports L15.02 and L15.08 RVUs, J06.03 through J06.19 RVUs, H06.08
and all subsequent H-series RVUs, and G06.29 and all subsequent G-series RVUs until
otherwise indicated by its replacement publication.
Part Number
Published
527188-024
June 2016
Document History
Part Number
Product Version
Published
527188-020
527188-021
527188-022
527188-023
527188-024
N/A
N/A
N/A
N/A
N/A
August 2012
August 2013
February 2015
August 2015
June 2016
Contents
_____________________________
What is New in This Manual .
.
Changed Commands
About This Manual
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
ix
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
x
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
xi
Audience .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
xi
Purpose
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
xii
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
xii
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
xii
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
xiii
Reference Section Numbers
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
xiv
.
.
.
.
.
.
.
.
.
.
.
.
.
.
xv
.
.
.
.
.
.
.
.
.
.
.
.
.
.
xvi
.
.
.
.
.
.
.
.
.
.
xvi
.
Document Usage
Reference Page Format
Related Documents .
.
Synopsis Format and Conventions
Obsolescent Flags
.
.
.
.
.
General Typographic and Keying Conventions
Standard Key Sequences
.
Unsupported OSS Utilities
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
xvii
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
xvii
Section 1. User Commands (a - b)
add_define . . .
alias . . . . .
apropos . . . .
ar . . . . . .
at . . . . . .
atq . . . . . .
atrm . . . . .
awk
. . . . .
banner
. . . .
basename
. . .
batch . . . . .
bc . . . . . .
bg . . . . . .
break . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
1-1
1-2
1-5
1-6
1-7
1-14
1-18
1-20
1-21
1-27
1-28
1-29
1-31
1-36
1-37
Section 2. User Commands (c)
c89
. . . .
c99
. . . .
cal . . . . .
cancel . . . .
cat . . . . .
cd . . . . .
chgrp . . . .
chmod
. . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2-1
2-2
2-40
2-72
2-73
2-75
2-77
2-78
2-80
527188-024
.
.
.
.
.
.
.
.
Hewlett Packard Enterprise
iii
OSS Shell and Utilities Reference Manual
chown
cksum .
clear .
cmp .
cobol .
comm .
command
compress
continue
cp . .
cpio .
crontab
csplit .
cut . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2-86
2-89
2-91
2-92
2-93
2-102
2-106
2-107
2-109
2-110
2-116
2-119
2-122
2-124
Section 3. User Commands (d - f)
date
. . . . .
dc . . . . . .
del_define
. . .
df . . . . . .
diff
. . . . .
dircmp
. . . .
dirname . . . .
dspcat . . . . .
dspmsg . . . .
du . . . . . .
echo . . . . .
ecobol
. . . .
ed . . . . . .
egrep . . . . .
eld . . . . . .
enoft . . . . .
env
. . . . .
eval
. . . . .
ex . . . . . .
exec . . . . .
exit
. . . . .
expand
. . . .
export . . . . .
expr . . . . .
false . . . . .
fc . . . . . .
fg . . . . . .
fgrep . . . . .
file
. . . . .
find
. . . . .
flex
. . . . .
fold
. . . . .
ftp . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3-1
3-2
3-5
3-9
3-10
3-11
3-14
3-16
3-17
3-19
3-21
3-23
3-25
3-43
3-51
3-56
3-82
3-108
3-109
3-110
3-122
3-123
3-124
3-125
3-126
3-128
3-129
3-131
3-132
3-138
3-141
3-148
3-158
3-160
Section 4. User Commands (g - j)
gencat
. . . .
genxlt . . . . .
getacl . . . . .
getconf
. . . .
getfilepriv
. . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
4-1
4-2
4-7
4-10
4-13
4-20
iv
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Hewlett Packard Enterprise
527188-024
Contents
getopts
.
gname
.
grep . .
gtacl . .
hash . .
head . .
history
.
iconv . .
id . . .
info_define
initfilepriv
ipcrm . .
ipcs
. .
jobs
. .
join
. .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
4-22
4-24
4-26
4-32
4-48
4-49
4-50
4-51
4-54
4-55
4-57
4-58
4-60
4-65
4-66
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
5-1
5-2
5-7
5-32
5-48
5-49
5-60
5-61
5-64
5-68
5-70
5-71
5-76
5-79
Section 6. User Commands (m - o)
make . . . . . .
man . . . . . .
mkcatdefs
. . . .
mkdir . . . . . .
mkfifo
. . . . .
more . . . . . .
mv . . . . . . .
nawk . . . . . .
newgrp
. . . . .
nice
. . . . . .
nl . . . . . . .
nld
. . . . . .
nm . . . . . . .
nmcobol . . . . .
noft
. . . . . .
nohup . . . . . .
od . . . . . . .
osh
. . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
6-1
6-2
6-11
6-14
6-17
6-19
6-20
6-26
6-31
6-37
6-38
6-40
6-43
6-51
6-55
6-73
6-89
6-91
6-95
Section 7. User Commands (p - r)
pack . . . . .
paste . . . . .
patch . . . . .
pathchk . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
7-1
7-2
7-4
7-7
7-11
Section 5. User Commands (k - l)
kill
. . . . .
ksh
. . . . .
ld . . . . . .
let . . . . . .
lex . . . . . .
line
. . . . .
ln . . . . . .
locale . . . . .
logger . . . . .
logname . . . .
lp . . . . . .
lpstat . . . . .
ls . . . . . .
527188-024
.
.
.
.
.
Hewlett Packard Enterprise
v
OSS Shell and Utilities Reference Manual
pax
. .
pinstall
.
pname
.
pr . . .
print . .
printf . .
ps . . .
pwd . .
read . .
readonly .
reset_define
return . .
rm . . .
rmdir . .
rsh . . .
run
. .
runcat . .
runv . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Section 8. User Commands (s)
sed
. . . .
set . . . . .
setacl . . . .
setfilepriv
. .
set_define
. .
sh . . . . .
shift . . . .
show_define . .
sleep . . . .
sort
. . . .
split . . . .
strings
. . .
strip . . . .
stty
. . . .
su . . . . .
sum
. . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
7-12
7-23
7-27
7-29
7-32
7-33
7-37
7-46
7-47
7-49
7-50
7-52
7-53
7-57
7-58
7-60
7-64
7-65
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
8-1
8-2
8-8
8-11
8-15
8-18
8-21
8-46
8-47
8-49
8-50
8-58
8-60
8-62
8-64
8-68
8-70
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
9-1
9-2
9-5
9-8
9-9
9-10
9-13
9-14
9-15
9-18
9-21
9-22
9-23
9-24
9-25
9-27
9-29
9-30
9-31
Section 9. User Commands (t - u)
tail
. . . . .
tar . . . . . .
tee . . . . . .
telnet . . . . .
test
. . . . .
time . . . . .
times . . . . .
touch . . . . .
tr . . . . . .
trap
. . . . .
true
. . . . .
tty . . . . . .
type . . . . .
typeset
. . . .
umask . . . . .
unalias
. . . .
uname
. . . .
uncompress . . .
vi
Hewlett Packard Enterprise
527188-024
Contents
unexpand
uniq .
unpack
unset .
uudecode
uuencode
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
9-33
9-34
9-36
9-38
9-39
9-40
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
10-1
10-2
10-17
10-23
10-24
10-25
10-27
10-28
10-29
10-31
10-32
10-36
10-54
10-79
10-105
10-114
Pages
. .
. .
. .
. .
. .
. .
. .
. .
. .
. .
. .
. .
. .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
11-1
11-2
11-6
11-7
11-8
11-10
11-29
11-30
11-31
11-33
11-34
11-36
11-37
11-39
Section 12. Administrator Commands and Files
copyoss . . . . . . . .
cron . . . . . . . . .
dig
. . . . . . . . .
dnssec-keygen . . . . . .
dnssec-signzone . . . . . .
dnssec_lwresd . . . . . .
dnssec_named . . . . . .
dnssec_nsupdate
. . . . .
dnssec_rndc . . . . . . .
ftpserver . . . . . . . .
inetd . . . . . . . . .
lwresd
. . . . . . . .
merge_whatis
. . . . . .
named
. . . . . . . .
newusers . . . . . . . .
nsupdate . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
12-1
12-2
12-5
12-8
12-14
12-17
12-20
12-22
12-24
12-27
12-29
12-35
12-40
12-42
12-44
12-46
12-49
Section 10. User Commands (v - z)
vi . . . . . .
vproc . . . . .
wait . . . . .
wall . . . . .
wc . . . . . .
whatis
. . . .
whence . . . .
who . . . . .
whoami . . . .
xargs . . . . .
xcobol
. . . .
xld
. . . . .
xnoft . . . . .
yacc . . . . .
zcat
. . . . .
Section 11. File Format Reference
charmap . . . .
hosts . . . . .
hosts.equiv . . .
ipnodes . . . .
locale . . . . .
netrc . . . . .
networks . . . .
.proto . . . . .
protocols . . . .
queuedefs
. . .
resolv.conf . . .
.rhosts
. . . .
services . . . .
527188-024
Hewlett Packard Enterprise
vii
OSS Shell and Utilities Reference Manual
Pcleanup
pcleanup
portmap
rexecd
rndc .
rpcinfo
rshd .
useradd
userdel
usermod
Permuted Index
Index
viii
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
12-52
12-54
12-55
12-60
12-62
12-64
12-71
12-72
12-76
12-77
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Pindex-1
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Index-1
Hewlett Packard Enterprise
527188-024
Contents
LIST OF TABLES
Table 3−1. Supported Magic Values .
.
.
Table 5−1. Controlling locale Utility Output
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3-138
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
5-65
.
.
.
.
.
.
.
.
.
.
.
5-65
.
.
.
.
.
.
.
.
.
.
.
11-2
Table 5−2. Categories and Keywords for the locale Utility
Table 11−1. The Portable Character Set
527188-024
.
.
.
.
.
.
Hewlett Packard Enterprise
ix
What is New in This Manual
This section describes changes made to the Open System Services Shell and Utilities
Reference Manual since the last edition (527188-023).
Unless otherwise indicated in the text, discussions of native mode behavior, processes,
and so forth apply to the TNS/R code that runs on systems running G-series RVUs, to the
TNS/E code that runs on systems running J-series RVUs or H-series RVUs, and to the
TNS/X code that runs on systems running L-series RVUs. Discussions of TNS or
accelerated code behavior in the OSS environment apply only to systems running Gseries RVUs; systems running L-series RVUs, J-series RVUs, or H-series RVUs do not
support TNS or accelerated code execution in the OSS environment.
Unless otherwise indicated in the text, all text that applies to systems running H06.14
and later H-series RVUs also applies to systems running J06.03 through J06.19 RVUs
and to systems running L15.02 and L15.08 RVUs.
This manual contains information about some of the following TNS/R, TNS/E, and
TNS/X development tools:
•
Native C compiler
•
Native C runtime library
•
Native C++ compiler
•
Native C++ runtime library
•
SQL/MP for native C
•
SQL/MP Compilation Agent
•
Native COBOL compiler
•
TNS/R utilities: nld and noft
•
TNS/E utilities: eld and enoft
•
TNS/X uttilities: xld and xnoft
•
TNS/R native pTAL
527188-024
Hewlett Packard Enterprise
ix
OSS Shell and Utilities Reference Manual
Changed)XQFWLRQV
1RQH2QO\+HZOHWW3DFNDUGUHSODFHPHQWWR+HZOHWW3DFNDUG(QWHUSULVHFKDQJHVPDGH
x
Hewlett Packard Enterprise
527188-024
About This Manual
HPE NonStop Open System Services (OSS) is partially derived from the Open
Software Foundation OSF/1 product version 1.2. The Open System Services Shell
and Utilities Reference Manual contains reference pages for OSS user commands and
utilities.
Unless otherwise indicated in the text, discussions of native mode behavior, processes,
and so forth apply to the TNS/R code that runs on systems running G-series RVUs, to the
TNS/E code that runs on systems running J-series RVUs or H-series RVUs, and to the
TNS/X code that runs on systems running L-series RVUs. Discussions of TNS or
accelerated code behavior in the OSS environment apply only to systems running Gseries RVUs; systems running L-series RVUs, J-series RVUs or H-series RVUs do not
support TNS or accelerated code execution in the OSS environment.
Unless otherwise indicated in the text, all text that applies to systems running H06.14
and later H-series RVUs also applies to systems running J06.03 through J06.19 RVUs
and to systems running L15.02 and L15.08 RVUs.
Beginning with the J06.14 and H06.25 RVUs, the OSS Core Utilities product (T1202)
provides support for additional Open Source utilities. Except for edits to include
NonStop-specific information, the OSS Core Utilities reference pages are passed through
without changes to their Open Source original content. These reference pages are
available in the /usr/coreutils/share/man directory; they are not available from HPE in
book form and not included in Open System Services reference manuals. For more
information, see the Open System Services Management and Operations Guide, the
Open System Services User’s Guide, and the individual reference pages.
Beginning with the L16.05 and J06.20 RVUs, current system call reference pages are
available in the /usr/share/man directory; Open System Services reference manuals will
no longer be updated. For more information, see the Open System Services Management
and Operations Guide, the Open System Services User’s Guide, and the individual
reference pages.
Audience
The Open System Services Shell and Utilities Reference Manual is intended for general
users of OSS as well as system and application programmers.
527188-024
Hewlett Packard Enterprise
xi
OSS Shell and Utilities Reference Manual
Purpose
The Open System Services Shell and Utilities Reference Manual provides a complete
description of OSS commands. It is intended primarily as a reference and not as a
tutorial.
Document Usage
This document contains 12 sections:
•
Sections 1 through 10 contain reference pages for all user commands and utilities
included in the basic OSS product set.
•
Section 11 contains reference pages for file formats related to the commands and
utilities.
•
Section 12 contains miscellaneous reference pages, usually intended for
administrator use.
The reference pages are organized alphabetically within each section.
If you are not sure of the name of the command you want, you can find help in the table
of contents, index, and permuted index. The permuted index is created from the
descriptions in the NAME section of each reference page (see Reference Page Format);
use it by searching for any term that might appear in a brief description of the desired
command’s purpose.
Reference Page Format
The top area of each reference page in the Open System Services Shell and Utilities
Reference Manual includes the name of the command described on that page. If more
than one command is described, all command names are included.
Each reference page is organized into sections. The sections generally appear in the
same order, but some appear in all reference pages and some are optional.
xii
NAME
Provides a brief description of the purpose of the command or
commands described.
SYNOPSIS
Summarizes the syntax of the command and elaborates on the
brief description of its use and function found in the NAME
section.
FLAGS
Lists and describes the command’s required or optional flags,
if any.
Hewlett Packard Enterprise
527188-024
About This Manual
DESCRIPTION
Describes the command more fully than the NAME and
SYNOPSIS sections.
SUBCOMMANDS
Describes in detail the command’s subcommands, if any.
EXAMPLES
Provides examples of ways in which the command is
typically used.
FILES
Lists any OSS system files that are read, employed, referred
to, or written to by the command, or that are otherwise
relevent to its use.
NOTES
Provides additional information about the command that is
not of general interest.
CAUTIONS
Cautions users about circumstances to be avoided when using
the command, or about loss of data that might result if the
command is used incorrectly.
DIAGNOSTICS
Provides information useful for diagnosing errors that might
result when the command is used.
EXIT VALUES
Lists and describes exit values returned by the command.
RELATED INFORMATION Lists OSS commands, functions, file formats, and special
files employed by the command, that have a purpose related
to that of the command, or that are otherwise of interest
within the context of the command. This section can also list
related documents.
STANDARDS CONFORMANCE Summarizes features that are fully described in
previous subsections and are flagged as implementationdefined or HP extensions to XPG4.
The POSIX standards leave some features to the
implementing vendor to define. These features are flagged as
implementation-defined. Features that HP has included that
are not in an XPG4 specification are flagged as HP extensions
to the XPG4 or XPG4 Version 2 specification.
Related Documents
For information about OSS commands and utilities, library calls, system calls, and
guidelines for general usage, see these manuals:
•
Accelerator Manual
•
Binder Manual
•
C/C++ Programmer’s Guide
•
HP COBOL Manual for TNS/E and TNS/X Programs
•
HP COBOL Manual for TNS and TNS/R Programs
527188-024
Hewlett Packard Enterprise
xiii
OSS Shell and Utilities Reference Manual
•
Common Run-Time Environment (CRE) Programmer’s Guide
•
eld and xld Manual (TNS/E and TNS/X systems only)
•
enoft Manual (TNS/E systems only)
•
xnoft Manual (TNS/X systems only)
•
ld Manual
•
Native Inspect Manual (TNS/E systems only)
•
nld Manual
•
noft Manual
•
Object Code Accelerator (OCA) Manual
•
Object Code Accelerator for TNS/X (OCAX) Manual
•
Open System Services Porting Guide
•
Open System Services Programmer’s Guide
•
Open System Services Library Calls Reference Manual
•
Open System Services System Calls Reference Manual
•
Open System Services User’s Guide
•
rld Manual
•
Software Internationalization Guide
•
TCP/IP and TCP/IPv6 Programming Manual
If you are working in or with the Guardian environment, see the Guardian Procedure
Calls Reference Manual and its related manuals.
If you are using the Guardian C run-time library, see the Guardian Native C Library
Calls Reference Manual.
Reference Section Numbers
Some topics in the reference pages have more than one reference page file, and the
reference section number indicates which set of information to display. For example,
iconv has a reference page for the iconv( ) function in section 3 and a reference page for
the iconv command in section 1.
Reference section numbers are included under the RELATED INFORMATION
heading and in the heading at the top of every reference page. The following table shows
the correspondence between reference section numbers and OSS manuals.
xiv
Hewlett Packard Enterprise
527188-024
About This Manual
Section
Content
Manual
___________________________________________________________________
(1)
User commands
OSS Shell and Utilities Reference Manual
(2)
System calls
OSS System Calls Reference Manual
(3)
Library calls
OSS Library Calls Reference Manual
OSS System Calls Reference Manual
(SPT_*( ) functions only)
(4)
File formats and
data structures
OSS System Calls Reference Manual
OSS Library Calls Reference Manual
OSS Shell and Utilities Reference Manual
(5)
Miscellaneous topics and
environment variables
(6)
Games
OSS System Calls Reference Manual
OSS Library Calls Reference Manual
OSS Shell and Utilities Reference Manual
Not supplied by HP
(7)
Special files
OSS System Calls Reference Manual
(8)
Administrator commands
OSS Shell and Utilities Reference Manual
Synopsis Format and Conventions
The SYNOPSIS section of each reference page summarizes the ways a command is
invoked. The following list describes the conventions used in these summaries.
•
Command names and all flags, required and optional, are always shown in bold type.
•
Arguments, to the command itself or to its flags, are always shown in italic type.
•
Optional items, including both flags and arguments, appear in brackets: for example,
[file]. Brackets are not always nested; therefore, an optional argument to an optional
flag appears in its own pair of brackets, following the flag in its pair of brackets. For
example, [-a] [file] indicates an optional flag -a with its optional argument file, as
opposed to [-a file], which indicates an optional flag -a and its required argument file.
The lack of nesting for brackets might incorrectly imply that the argument could be
specified without the flag; when in doubt, consult the FLAGS section of the
reference page.
•
In general, flags that do not take arguments and are not mutually exclusive are
grouped together (in a pare of brackets if they are optional). For example:
-aj[k]v In gereral, flags that have related arguments are shown separately. For
example:
[-cCdfFnqvV] [-b maxbits]
•
Beyond the preceding grouping requirements, flags appear in alphabetical order (U.S.
English), with uppercase letters following lowercase letters—for example, -aAjkKv.
527188-024
Hewlett Packard Enterprise
xv
OSS Shell and Utilities Reference Manual
•
Command arguments appear in the order required by the command, if any.
Mandatory arguments appear before optional arguments unless the command
requires otherwise.
•
Operands of indeterminate number are indicated by an ellipsis following the flag
name—for example, [-a file ...].
•
Because some flags are separated from their operands by spaces, a diagram might be
unclear as to whether an operand is an operand to the command or to a required flag.
When in doubt, consult the FLAGS section of the reference page.
•
When two or three flags or operands are mutually exclusive (that is, they cannot be
used together) they are separated by vertical bars — for example, -a | -j, or [-k file |
directory].
•
When a greater number of items are mutually exclusive, or some other aspect of the
command’s use creates greater than normal complexity, more than one diagram is
provided.
Obsolescent Flags
Obsolescent flags (that is, flags that have been replaced by new flags that reflect future
trends in conformance) are documented. The new flags supersede the obsolescent flags,
but the obsolescent flags are still supported.
General Typographic and Keying Conventions
This document uses several typographic conventions. (See also Synopsis Format and
Conventions.)
xvi
Bold
Bold words or characters represent system elements that you
must use literally, such as commands, flags, pathnames, and
variable names. Bold type is always used to represent user
input; anything to be typed or entered by the user is
represented in bold type. (The EXAMPLES section is an
exception; in that section, constant width type represents
user input.)
Italic
Italic words or characters represent variable values. When
italic type appears in user input examples, it represents a
portion of the input that varies according to the situation or
the user’s choice.
Constant width
System output in command examples in the EXAMPLES
section is represented by constant width typeface. In
addition, constant width is used in descriptive text to
represent system messages.
Hewlett Packard Enterprise
527188-024
About This Manual
Keystrokes
Keystrokes are indicated by the name of the key to be pressed
in angle brackets in bold type: for example, &lt;Return&gt; or
&lt;Tab&gt;. Key names vary from one keyboard to the next; for
example, the &lt;Esc&gt; key might appear on your keyboard as
&lt;Escape&gt; and &lt;Ctrl&gt; as &lt;Control&gt;. If you are unable find
some of the keys referred to on your keyboard, consult your
hardware documentation or system administrator.
When two keys are to be pressed at the same time, they are
shown together within the brackets, separated by a hyphen:
for example, &lt;Ctrl-c&gt;, indicates that you should hold down
the &lt;Ctrl&gt; key and press the &lt;c&gt; key. (Control characters in
system output are represented as ˆC, ˆX, and so on.)
In general, the &lt;Delete&gt; and &lt;Erase&gt; keys generate different
codes, but are functionally equivalent. While &lt;Delete&gt; is
usually mapped to ASCII code 127, represented by ˆ?, and
&lt;Erase&gt; is usually mapped to the ASCII backspace
character, ˆH, either can be mapped to another code on a
particular keyboard or system. If these keys do not have the
results described, consult the stty and tset reference pages or
your system administrator.
Standard Key Sequences
Some standard keystroke sequences are used for general purposes. For example, the
Interrupt key sequence interrupts and cancels the current action, without proceeding
further; you might use it to stop a command that is displaying output you do not want on
your screen.
The actual keys used are the same on most systems, but they are not universal. For
example, the Interrupt key sequence is usually &lt;Ctrl-c&gt;, but not always.
The reference pages in this manual refer to these key sequences by name. In some cases,
the customary keystroke is given. For the two most common sequences, the customary
keystrokes are not given. The End-of-File key sequence, used to end user input or
otherwise complete an action, is usually &lt;Ctrl-d&gt;. The Interrupt sequence, used to
interrupt or cancel the current action, is usually &lt;Ctrl-c&gt;.
Use these keystrokes for the End-of-File and Interrupt key sequences, and the keystrokes
listed in the text for the others. If these keystrokes do not have the desired effect, consult
the stty and tset reference pages or your system administrator.
Unsupported OSS Utilities
Unsupported OSS utilities are utilities that HP has released, but not tested. HP does not
guarantee the behavior or performance of these utilities and is not obligated to fix
527188-024
Hewlett Packard Enterprise
xvii
OSS Shell and Utilities Reference Manual
problems associated with them.
The unsupported utilities are in /bin/unsupported. Any documentation for the
unsupported utilities also would be in /bin/unsupported. To access reference pages for
unsupported utilities with the man command, add the path /bin/unsupported to your
MANPATH or specify it as an alternative path using the -M flag with the man
command:
man -M /bin/unsupported -k keyword
A reference page for an unsupported utility includes text stating that the utility is
unsupported. Not all of the unsupported utilities are documented by reference pages.
xviii
Hewlett Packard Enterprise
527188-024
Section 1. User Commands (a - b)
This section contains reference pages for the Open System Services (OSS) user
commands with names starting with the Letters a through b.
527188-024
Hewlett Packard Enterprise
1−1
add_define(1)
OSS Shell and Utilities Reference Manual
NAME
add_define - Creates one or more DEFINEs for the current OSS shell
SYNOPSIS
add_define
{define_name1}...
[-like=define_name2]
[attribute_specs]...
FLAGS
-like=define_name2
Creates a DEFINE with the attributes and values of the specified define_name2 and
modified by the specified attribute_specs clauses. If the -like flag is not specified, the
DEFINE created has the attributes and values of the working attribute set modified by
the specified attribute_specs clauses.
DESCRIPTION
The add_define command is specific to HPE and an OSS shell built-in command. It creates
DEFINES for the OSS shell and is similiar to the TACL ADD DEFINE command.
The add_define command accepts Guardian attributes. As a result, input must follow Guardian
conventions.
Operands
define_name1
Specifies the name of the DEFINE to be created. The name can be 2 through 24 characters long. The first character must be an equal sign (=), and the second must be a
letter. If neither the -like flag nor the attribute_specs parameter is specified, the
DEFINE is created with the attributes and value
of the working attribute set.
attribute_specs
Specifies the names of one or more valid DEFINE attributes and the values they are to
have. If the -like flag is specified, a DEFINE is created with the attributes and values of
the specified DEFINE and modified by the clauses specified by attribute_specs. If the
-like flag is not specified, a DEFINE is created with the attributes and values of the
working attribute set and modified by the specified attribute_specs. attribute_specs is
defined as:
class={catalog | defaults | map | search | sort |
spool | subsort | tape}
{class_attributes}...
Class Attributes
Certain characters are special in the OSS environment and must be preceded by an escape character or they will not be accepted by the add_define command. For a detailed description of the
valid class attributes, refer to the ADD DEFINE and SET DEFINE commands in the TACL Reference Manual.
The add_define command accepts Guardian attributes for setting up the Guardian environment.
As a result, input must follow Guardian conventions.
For class=catalog (a CATALOG DEFINE), you must use the escape character in class-attributes
as follows:
subvol=\$a123
For class=defaults (a DEFAULTS DEFINE), you must use the escape character in classattributes
1−2
Hewlett Packard Enterprise
527188-024
User Commands (a - b)
add_define(1)
as follows:
volume=\$oss.joe
swap=\$null
catalog=\$system.catalog
For class=map (a MAP DEFINE), you must use the escape character in class-attributes
as follows:
file=\$volume.subvolume.file
For class=search (a SEARCH DEFINE), you must use the escape character in class-attributes
as follows:
subvol0=\(a,b,c,d\)
relsubvol0=\\foxii.\$coral.i
subvol2=\(\$data.y2,y22\)
For class=sort (a SORT DEFINE), you must use the escape character in class-attributes
as follows:
scratch=\\foxii.\$oss.joe.scratch
swap=\\foxii.\$oss.joe.swap
program=\\foxii.\$oss.joe.suprsort
cpus=\(1,2\)
notcpus=\(0,3\)
subsorts=\(=subsort1,-subsort2\)
For class=spool (a SPOOL DEFINE), you must use the escape character in class-attributes
as follows:
loc=\\kt22.\$s.#a
For class=subsort (a SUBSORT DEFINE), you must use the escape character in class-attributes
as follows:
scratch=\\foxii.\$oss.joe.scratch
swap=\\foxii.\$oss.joe.swap
program=\\foxii.\$oss.joe.suprsort
For class=tape (a TAPE DEFINE), you must use the escape character in class-attributes
as follows:
device=\$device
volume=\(v1,v2\)
system=\\foxii
EXAMPLES
1.
To make the name =PLUTO represent the file name \\FAR.\$OFF.WORLDS.PLUTO
enter:
add_define =PLUTO file=\\FAR.\$OFF.WORLDS.PLUTO
2.
To set up a TAPE DEFINE named =S2 that describes a tape file on the IBM standard,
enter:
add_define =S2 class=tape labels=ibm fileid=\$TAPE
527188-024
Hewlett Packard Enterprise
1−3
add_define(1)
3.
OSS Shell and Utilities Reference Manual
To create a new DEFINE named PLUTO2 that has the characteristics of the DEFINE
named =PLUTO, enter:
add_define =PLUTO2 -like ==PLUTO
EXIT VALUES
The following exit values are returned:
0
DEFINEs were created successfully.
&gt;0
An error occurred.
NOTES
The add_define command is a shell built-in command. It differs from the regular commands in
that it does not open a new shell process when it executes.
A general discussion of shell built-in commands and a list of the OSS shell built-in commands
are in the reference page for sh(1).
RELATED INFORMATION
Commands: del_define(1), info_define(1), reset_define(1), set_define(1), show_define(1).
STANDARDS CONFORMANCE
The add_define command is an Hewlett Packard Enterprise extension to the XPG4 Version 2
specification.
1−4
Hewlett Packard Enterprise
527188-024
User Commands (a - b)
alias(1)
NAME
alias - Defines and lists aliases
SYNOPSIS
alias [-tx] [name[=value ...]]
FLAGS
-t
Sets or lists tracked aliases.
-x
Sets or prints exported aliases.
DESCRIPTION
The alias command with no arguments prints the list of aliases in the form name=value on standard output, where name is the name of an alias and value is the current definition of that alias.
If a name and value of the form name=value are specified an alias is defined for each name
whose value is given.
A trailing space in value causes the next word to be checked for alias substitution.
The -t flag is used to set and list tracked aliases. The value of a tracked alias is the full pathname
corresponding to the given name. The value becomes undefined when the value of PATH is
reset but the aliases remained tracked. If the -t flag is not specified, the name and value of the
alias is printed for each name in the argument list for which no value is given.
The -x flag is used to set or print exported aliases. An exported alias is defined for scripts
invoked by name.
EXAMPLES
1.
The following command lists all of the aliases in the current shell.
alias
EXIT VALUES
Exit status is nonzero if a name is given without a value and no alias was defined.
NOTES
The alias command is a shell built-in command. It differs from the regular commands in that it
does not open a new shell process when it executes.
A general discussion of shell built-in commands and a list of the OSS shell built-in commands
are in the reference page for sh(1).
RELATED INFORMATION
Commands: sh(1), unalias(1).
527188-024
Hewlett Packard Enterprise
1−5
apropos(1)
OSS Shell and Utilities Reference Manual
NAME
apropos - Locates reference pages by keyword
SYNOPSIS
apropos keyword ...
The apropos command shows which reference pages contain instances of any of the given
keywords in their purpose lines.
DESCRIPTION
In looking for keywords, apropos considers each word separately and ignores the case of letters.
Words that are part of other words are also considered; thus, when looking for the word compile,
apropos will also find all instances of compiler. The keyword argument can also be a regular
expression. For more information, see the grep reference page.
If the output of the apropos command begins with a name and reference section number, you can
enter man section name. For example, if the output of the apropos command is printf(3), you
can enter man 3 printf to obtain the reference page on the printf( ) function.
The apropos command works just like the man command with the -k flag.
EXAMPLES
To find reference pages with the keyword password in the purpose line, enter:
apropos password
FILES
/usr/share/man/whatis
Keyword database.
RELATED INFORMATION
Commands: grep(1), man(1), whatis(1).
1−6
Hewlett Packard Enterprise
527188-024
User Commands (a - b)
ar(1)
NAME
ar - Creates and maintains archive files and libraries
SYNOPSIS
ar -d [-v] [-l] archive file ...
ar -m [-aAbilv] [position_name] archive file ...
ar -p [-v] [-s] archive [file ...]
ar -q [-clv] archive [file ...]
ar -r [-cuv] [-abil] [position_name] archive file ...
ar -t [-v] [-s] [-Wfiletype] archive [file ...]
ar -Wobey obey_file
ar -x [-v] [-sCT] archive [file ...]
FLAGS
In an ar command, you can list selected flags together in one group on the command line, with
no spaces between them. You can precede this single flag list with a - (dash), but it is not
required.
You must specify at least one flag from the required-flag set dmpqrtx. You can also specify any
number of optional flags from the set abcilsuvCT. If you select a positioning flag (a, b, or i), you
must also specify the name of a file within the library (position_name) immediately following the
flag list and separated from it by a space.
-a
Positions new files in the archive after the file identified by the position_name
operand.
-A
Suppresses warning messages about optional access control list (ACL) entries.
The ar utility does not archive optional ACL entries. If this flag is not set, a
warning message is issued for each file that has optional ACL entries. For more
information about ACLs, see the acl(5) reference page.
-b
Positions new files in the archive before the file identified by the position_name
operand.
-c
Suppresses the diagnostic message written to the standard error file by default
when the archive file archive is created.
-C
Prevents extracted files from replacing like-named files in the file system. This
flag is useful with the -T flag to prevent truncated filenames from replacing files
with the same prefix.
-d
Deletes the named files from the archive.
-i
Positions new files in the archive before the file identified by the position_name
operand. (This flag is equivalent to the -b flag.)
-l
Creates temporary files in the local current working directory, rather than in the
directory specified by the environment variable TMPDIR.
-m
Moves the named files to some other position in the archive. By default, this flag
moves the named files to the end of the archive. Use the positioning flags (a, b,
or i) to specify a position other than the default position.
527188-024
Hewlett Packard Enterprise
1−7
ar(1)
OSS Shell and Utilities Reference Manual
-p
Writes the contents of the named files from archive to the standard output file. If
no files are specified, the contents of all files in the archive are written in the
order they occur in the archive.
-q
Quickly appends the named files to the end of the archive file. The ar command
does not check whether the appended files already exist in the archive. ar is useful if you want to bypass the search process that is otherwise done when a large
archive is created piece by piece.
-r
Replaces or adds files to an archive. If the archive named in the archive operand
does not exist, a new archive file is created and a diagnostic message is written
to the standard error file (unless the -c flag is specified). If no files are specified
and the archive exists, no changes are made to the archive. Files that replace
existing files do not change the order of the archive. Files that do not replace
existing files are appended to the end of the archive.
-s
Forces the regeneration of the archive symbol table even if ar is not invoked
with a flag that modifies the archive file contents.
-t
Writes a table of contents for the library to the standard output file. The files
specified by the file operands are included in the written list. If no file operands
are specified, all files in the archive given by the archive operand are included in
the order of the archive.
-T
Allows truncation of names of files whose archive names are longer than 255
characters. By default, extracting a file with a name that is too long is an error: a
diagnostic message is written, and the file is not extracted.
-u
Updates older files by copying to the archive only those files that have changed
since they were last entered into the archive. When used with the -r flag, -u
allows files in the archive to be replaced only by files having more recent
modification times.
-v
Writes to the standard output file a verbose description of a library. When the -v
flag is used with flags -d, -r, or -x, it writes a file-by-file description of the
archive operations as they are performed.
When -v is used with the -p flag, it writes the name of the file to the standard output file before it writes the file to the standard output file.
When -v is used with the -t flag, it writes a detailed list of information about each
file, including access, ownership, size, and time, to the standard output file.
-Wfiletype
1−8
Displays the file type. When specified with -tv flags, it displays [elf-non PIC]
for TNS/R native object files that are not position-independent code (non-PIC),
[elf PIC] for TNS/R PIC native linkfiles or native load files, [tnse 32-bit] for
TNS/E native object files of 32-bit data model, [tnse 64-bit] for TNS/E native
object files of 64-bit data model, [tnse neutral] for TNS/E native object files of
neutral data model, [tnsx 32-bit] for TNS/X native object files of 32-bit data
model, [tnsx 64-bit] for TNS/X native object files of 64-bit data model, [tnsx
neutral] for TNS/X native object files of neutral data model, [tns] for TNS and
accelerated object files, or nothing for other file types such as text files. Use this
flag when ar cannot generate the symbol table because native linkfiles or
loadfiles are mixed with TNS or accelerated object files, when TNS/E native
object files of 32-bit and 64-bit data models are mixed, or when TNS/X native
object files of 32-bit and 64-bit data models are mixed.
Hewlett Packard Enterprise
527188-024
User Commands (a - b)
ar(1)
-Wobey obey_file
Indicates that a flag and a list of files to be processed should be read from the file
obey_file rather than from the command line. The -Wobey flag cannot be used
on the command line when any other flag is used on the command line. Use the
-Wobey flag to speed up execution of ar when more than one file must be processed.
The file obey_file must be either a Guardian EDIT file or an OSS text file. In the
file obey_file, you must specify one and only one flag from the required-flag set
dmpqrtx. You can also specify any number of optional flags from the set abcilsuvCT. If you select one of the positioning flags (a, b, or i), you must also
specify the name of a file within the library (position_name) immediately following the flag list and separated from it by a space.
-x
Extracts the files identified in the file operands from the archive specified in the
archive operand. The contents of the archive file are not changed. If no file
operands are specified, all files in the archive are extracted. If the filename of a
file to be extracted from the archive is longer than the name length supported for
the target directory, an error results and, unless -T has also been specified, the
file is not extracted. If -T has also been specified, the file is extracted and given
a truncated filename. The modification time of each extracted file is set to the
time the file is extracted from the archive.
DESCRIPTION
The ar command creates and maintains groups of one or more named files as a single archive
(library) file written in ar archive format. After an archive file has been created, new files can be
added to the archive file, and existing files can be extracted from it, deleted, or replaced.
The ar command accepts the following as archive members:
•
All OSS files
•
Guardian TNS code files
•
Accelerated object files
•
Guardian C text files (file code 180 files)
•
TNS/R (PIC and non-PIC) native object files
•
TNS/E native linkfiles or loadfiles
•
TNS/X native linkfiles or loadfiles
You can mix one or more object file formats in one archive file. However, such an archive file
cannot be used by the Binder, nld, ld, eld, or xld utility.
If an archive file contains only files in a single object file format, an archive symbol table is
created as the first file member of the archive file. The format of this table depends upon the
linker utility for the corresponding object file format. This table is maintained by ar and used by
the Binder (for TNS and accelerated object files), the nld utility (for TNS/R native non-PIC
object files), the ld utility (for TNS/R native PIC object files), the eld utility (for TNS/E native
PIC files), and the xld utility (for TNS/X native PIC files) to search the archive file and extract
archive members from it.
When the ar utility is used to create or update the content of such an archive, the symbol table is
rebuilt automatically. The -s flag forces the symbol table to be rebuilt.
An archive file embedded as a member of another archive file is not used by the Binder, nld utility, the ld utility, the eld utility, or the xld utility.
527188-024
Hewlett Packard Enterprise
1−9
ar(1)
OSS Shell and Utilities Reference Manual
All file operands can be pathnames. However, files within archive files are given a filename,
which is the last component of the pathname used when the file was entered into the archive file.
Multiple files within the archive file can be identically named. In these cases, each file and
position_name operand matches only the first archive file having a name that is the same as the
last component of the file or position_name operand.
An archive file can be created for the OSS, Guardian, or a target-independent execution environment. An OSS archive file is made up of OSS and target-independent object files. A Guardian
archive file is made up of Guardian and target-independent object files. A target-independent
archive file is made up of target-independent object files.
Text files are always target-environment independent.
If ar detects mixing of OSS and Guardian environment object files, it issues a warning message
but does not prevent you from creating an archive file of mixed environments. It is your responsibility to ensure that procedures used for resolving references work in the target environment;
otherwise, program execution results in runtime errors.
If ar detects mixing of TNS/E or TNS/X native object files of 32-bit and TNS/E or TNS/X 64-bit
data models, it issues a warning message, but does not prevent you from creating an archive file.
The file structure of archive files is defined in the ar.h header file.
Operands
ar supports the following operands:
archive
The pathname of the archive file to be created or modified.
The maximum size of an archive file is 1,024,491,520 bytes. If operations on the
archive file cause the file to exceed that size limit, the ar command returns an
error message and the archive file becomes corrupted because ar cannot create
the symbol table information.
file
The pathname of a file to be processed. Only the last component of a pathname
is used in comparing the filename with names of files in the archive file. If two
or more file operands have the same last component in their pathname
(basename), they are all archived as separate members with the same name. ar
does not truncate valid filenames of files added to or replaced in the archive file.
position_name The name of a file within the archive file; used for relative positioning. See flags
-m and -r.
Environment Variables
The following environment variable affects the execution of ar.
TMPDIR
Determines the pathname that overrides the default directory for temporary files,
if any.
This utility supports the use of the LANG, LC_ALL, LC_CTYPE, LC_MESSAGES, and
NLSPATH environment variables.
Input Files
The input file identified in the archive operand must be a file in the format created by the command ar -r.
1−10
Hewlett Packard Enterprise
527188-024
User Commands (a - b)
ar(1)
Standard Output
Standard output depends on the flags used with ar.
•
If the -d flag is used with the -v flag, the standard output format is:
&quot;d - %s \n&quot;, file
where file is the file operand specified on the command line.
•
If the -p flag is used with the -v flag, ar precedes the contents of each file with:
&quot;\n%s\n\n&quot;, file
where file is the file operand specified on the command line if file operands were
specified, or the name of the file in the archive if the file operands were not specified.
•
If the -r flag is used with the -v flag and the file specified in the file operand is already in
the archive, the standard output is:
&quot;r - %s\n&quot;, file
where file is the file operand specified on the command line.
•
If the file specified in the file operand is being added to the archive and the -r flag is
used, the standard output is:
&quot;a - %s\n&quot;, file
where file is the file operand specified on the command line if file operands were
specified, or the name of the file within the archive file if the file operands were not
specified.
•
If the -t flag is used, ar writes the names of the files to the standard output file in the format:
&quot;%s\n&quot;, file
where file is the file operand specified on the command line if file operands were
specified, or the name of the file within the archive file if the file operands were not
specified.
•
If the -t flag is used with the -v flag the standard output is:
&quot;%s %u/%u %u %s %d %d:%d %d %s\n&quot;, member-node, user-ID, group-ID,
number-of-bytes-in-member, abbreviated-month, day-of-the-month, hour, minute, year,
file
Where:
file
is the file operand specified on the command line if file operands were
specified, or the name of the file within the archive file if the file operands were
not specified.
member-node
is formatted the same as the file-node string in the output of the ls command,
except for the first character, the entry-type, which is not used. The string
represents the file mode of the archive member at the time it was added to, or
replaced within, the archive file.
527188-024
Hewlett Packard Enterprise
1−11
ar(1)
OSS Shell and Utilities Reference Manual
user-ID is the OSS user ID (UID) associated with the file at the time it was added to, or
replaced within, the archive file.
group-ID
is the group ID (GID) associated with the file at the time it was added to, or
replaced within, the archive file.
number-of-bytes-in-member
is the size of the file in bytes at the time it was added to, or replaced within, the
archive file.
The following output entries record the last modification time of a file when the file was
most recently added or replaced in the archive file.
abbreviated-month
is equivalent to the %b format in the output of the date command.
day-of-the-month
is equivalent to the %e format in the date command.
•
hour
is equivalent to the %H format in the date command.
minute
is equivalent to the %M format in the date command.
year
is equivalent to the %Y format in the date command.
If the -x flag is used with the -v flag, the standard output format is:
&quot;x - %s\n&quot;, file
where file is the file operand specified on the command line if file operands were
specified, or the name of the file within the archive file if the file operands were not
specified.
Standard Error
Messages from the ar command are only diagnostic messages. The diagnostic message about
creating a new archive file when the -c flag is not specified does not modify the exit status.
Output Files
Output is the normal archive file name with string &quot;!arch\n&quot; at the beginning.
EXAMPLES
1.
The command
ar -rcv newlib a1.o a2.o a3.o a4.o
creates an archive file named newlib (if an archive file by that name does not already
exist) with the files a1.o, a2.o, a3.o, and a4.o as its members. If newlib already
exists and some of the files named a1.o, a2.o, a3.o, and a4.o are in the archive,
these files are replaced by the new files. Files that are not current members of the
archive are added to the end of the archive file. The -v flag causes a file-by-file replacement or addition message to be displayed on the terminal when each operation is initiated.
2.
The command
ar -tv newlib
displays a detailed table of contents of the archive newlib.
1−12
Hewlett Packard Enterprise
527188-024
User Commands (a - b)
3.
ar(1)
The command
ar -x oldlib x.o y.o
extracts member files x.o and y.o from the archive oldlib.
4.
The command
ar -rb abc.o oldlib x.o y.o
adds new member files x.o and y.o to the archive file oldlib. The new files are
inserted in front of the existing member abc.o.
5.
The command
ar -dv libmylib f1.0 f2.0
deletes files f1.0 and f2.0 from the archive libmylib.
FILES
ar.h
Describes the file structure of archive files.
DIAGNOSTICS
ar: creating archive archive.
Informative message. The archive file specified in the command did not exist and
has been created.
ar: archive contains a mix of 32-bit and 64-bit data models
Warning message. The ar utility detected a mixing of TNS/E or TNS/X native
object files of 32-bit and TNS/E or TNS/X 64-bit data models, but did not
prevent you from creating an archive file.
ar: archive: Guardian or User Defined Error 43
The ar utility cannot obtain disk space for a file extent.
ar: archive: Guardian or User Defined Error 45
The resulting file size exceeds 1,024,491,520 bytes and the file is not a valid
archive file.
EXIT VALUES
The following exit values are returned:
0
Successful completion.
&gt;0
An error occurred.
RELATED INFORMATION
Commands: c89(1), c99(1), eld(1), ld(1), make(1), nld(1), nm(1), strip(1), xld(1).
Files: ar(4).
Miscellaneous topics: acl(5).
STANDARDS CONFORMANCE
This command conforms to the XPG4 Version 2 specification with extensions and UNIX extensions. The -W flags are Hewlett Packard Enterprise extensions to the specification.
527188-024
Hewlett Packard Enterprise
1−13
at(1)
OSS Shell and Utilities Reference Manual
NAME
at - Runs commands at a user-specified later time
SYNOPSIS
at [-c | -s | -k]
[-f file] [-q queuename]
when [date] [+increment]
[command | file] ...
at [-c | -s | -k]
[-f file] [-q queuename]
-t time
at -l [-o] [-q queuename] [user ...]
at -l [job_number ...]
at -r [ [-Fi] job_number ... ] | [-u user]
at -n [user]
FLAGS
-c
Requests that csh be used for executing this job. csh is not currently supported. In the
current implementation, ksh will be used.
-f file
Specifies the file to be used as input instead of the standard input file.
-F
Suppresses delete verification.
-i
Specifies interactive delete.
-k
Requests that ksh be used for executing this job.
-l [job_number ...]
Reports the scheduled jobs for the invoking user. If the job_number argument is
specified, at reports only the information for the specified jobs.
If a user with appropriate privileges issues the command with this flag, all of the
queued at commands are listed with the name of the user who issued each one. The
user with appropriate privileges can also request a report of scheduled jobs for only one
specified user.
-n [user] Requests the number of files in the queue for the current user. A user with appropriate
privileges can specify a different user with the user argument.
-o
Lists jobs in scheduled order. This flag is useful only when used with the -l flag.
-q queuename
Specifies the queue you want to use. When used with the -l flag, this flag limits the
search to the specified queue. A queue name can be specified by a, b, or e, as
described in DESCRIPTION. Queue a is the default queue.
-r job_number ...
Removes a job previously scheduled by at or batch, where job_number is the number
assigned by at or batch. If you do not have appropriate privileges, you can remove
only your own jobs. The atrm command is available to users with appropriate
privileges to remove jobs issued by other users or all jobs issued by a specific user.
This flag can also be used in combination with the -i, -f, and -u flags.
1−14
Hewlett Packard Enterprise
527188-024
User Commands (a - b)
at(1)
-s
Requests that the Bourne shell be used for executing this job. In the current implementation, ksh will be used.
-t time
Submits the job to be run at the specified time. The time argument must be in the format described for the touch command: [[cc]yy]MMddhhmm[.ss]. (For more information, refer to the touch(1) reference page.)
-u user
Deletes all jobs for the specified user. This flag must be used with the -r flag as follows:
at -r -u user
DESCRIPTION
The at command reads from the standard input file or accepts as arguments the names of commands to be run at a later time. The at command allows you to specify when the commands are
to be run.
If a file specified on an at command line is executable (that is, has the x permission for the user
executing the command), at assumes that it is a command and that the job consists only of this
command. If the file is not executable, at assumes that you want its contents to be the instructions for the job (same as BSD at). If at cannot find the file at all, the specification is passed to
the date parser. If the specification is not recognized by the date parser, the user receives the
error message Unknown word.
Variables in the shell environment, the current directory, umask, and ulimit are retained when
the commands are run. Open file descriptors, traps, and priority are lost.
You can use at if your login name appears in the /usr/lib/cron/at.allow file. If that file does not
exist, at checks the /usr/lib/cron/at.deny file to determine if your login name is denied access to
at. The at.allow and at.deny files contain one login name per line.
If neither file exists, only a user with appropriate privileges can submit a job. If the at.allow file
does exist, the login name of a user with appropriate privileges must be included in it for that
user to be able to use the command.
Operands
when
The required when operand can be one of the following:
•
The at command recognizes a number followed by an optional suffix. at
interprets 1-digit and 2-digit numbers as hours. It interprets 4-digit
numbers as hours and minutes.
The LC_TIME environment variable specifies the order of hours and
minutes. The default order is the hour followed by the minute. You can
also separate hours and minutes with a : (colon). The default order is
hour:minute.
In addition, you can specify a suffix of am, pm, or utc. If you do not
specify am or pm, at uses a 24-hour clock. The suffix utc indicates that
the time is UTC (Coordinated Universal Time).
•
527188-024
The at command also recognizes the following keywords as special
times: noon, midnight, now, A for a.m., P for p.m., N for noon, and M
for midnight. The LC_TIME environment variable controls the additional keywords that at recognizes.
Hewlett Packard Enterprise
1−15
at(1)
OSS Shell and Utilities Reference Manual
date
You can specify the date operand as either a month name and a day number (and
possibly a year number preceded by a comma), or a day of the week.
The LC_TIME environment variable specifies the order of the month name and
day number (by default, month followed by day). at recognizes two special
days, today and tomorrow, by default. today is the default date if the specified
time is later than the current hour; tomorrow is the default date if the specified
time is earlier than the current hour.
If the specified month is less than the current month (and a year is not given),
next year is the default year.
+increment
job_number
The optional increment operand can be one of the following:
•
A + (plus sign) followed by a number and one of the following words:
minute[s], hour[s], day[s], week[s], month[s], or year[s] (or their
nonEnglish equivalents).
•
The special word next followed by one of the following words:
minute[s], hour[s], day[s], week[s], month[s], or year[s] (or their
nonEnglish equivalents).
Job numbers are specified as follows:
user.xxxxxxxxx.y
user
Identifies the user who scheduled the job.
xxxxxxxxx
Is a 9-digit number indicating the encoded time for the job.
y
Indicates the job type or queue name as follows:
a
at job
b
batch job
e
ksh job
Environment Variables
This command supports the use of the LANG, LC_ALL, LC_CTYPE, LC_MESSAGES,
LC_TIME, and NLSPATH environment variables.
EXAMPLES
1.
To schedule a command from a terminal, enter a command similar to one of the following:
at 5 pm Friday runme
at now next week runme
at now + 2 days runme
Note that the preceding commands can be scheduled as shown only if runme is in the
current directory.
2.
To run cal at 3:00 in the afternoon on January 24, enter any one of the following commands:
echo cal | at 3:00 pm January 24
echo cal | at 3pm Jan 24
echo cal | at 1500 jan 24
1−16
Hewlett Packard Enterprise
527188-024
User Commands (a - b)
3.
at(1)
To list the jobs you have sent to be run later, enter:
at -l
4.
To cancel a job, enter:
at -r super.super.586748399.a
This cancels job super.super.586748399.a.
FILES
/var/adm/cron
Main cron directory.
/usr/lib/cron/at.allow
List of allowed users.
/usr/lib/cron/at.deny
List of denied users.
/var/spool/cron/atjobs
Queue.
NOTES
The at utility does not accept jobs submitted from processes whose login user ID is different
from the real user ID.
CAUTIONS
It is recommended that you do not use unspecified queues (queues other than a, b, and e). The
results of such use are unspecified.
EXIT VALUES
The at command returns the following exit values:
0 (zero)
The at utility successfully submitted, removed, or listed one or more jobs.
&gt;0
An error occurred.
RELATED INFORMATION
Commands: atq(1), atrm(1), batch(1), cron(8), kill(1), ps(1), sh(1), touch(1).
STANDARDS CONFORMANCE
This command conforms to the XPG4 Version 2 specification with extensions, except for the following features:
•
The -m flag is not supported.
•
The SHELL and TZ environment variables are not used.
The following features are Hewlett Packard Enterprise extensions to the XPG4 Version 2
specification:
•
527188-024
The -c, -F, -i, -k, -s, and -u flags are supported.
Hewlett Packard Enterprise
1−17
atq(1)
OSS Shell and Utilities Reference Manual
NAME
atq - Prints the queue of jobs waiting to be run
SYNOPSIS
atq [-c | -n] [-q queuename] [user ...]
FLAGS
-c
Sorts the queue by the time that the at command was issued.
-n
Prints only the number of files currently in the queue.
-q queuename
Specifies the queue you want to use.
DESCRIPTION
The atq command prints the queue of jobs waiting to be run at a later date. These jobs were
created with the at command.
If no flags are specified in the atq command, the queue is sorted in the order that the jobs will be
executed. If the user has appropriate privileges and one or more user names are provided, only
jobs belonging to those users are displayed. If no user names are provided, then a list of all jobs
submitted is displayed.
If flags are specified, the list of jobs belonging to the user who invoked the atq command is
displayed.
Environment Variables
This command supports the use of the LANG, LC_ALL, LC_CTYPE, LC_MESSAGES, and
NLSPATH environment variables.
EXAMPLES
To look at the queue created by the at command, enter:
atq
If there are jobs in the queue, a message similar to the following is displayed for each job:
super.super.62169200.a
Tue Sep 12 11:00:00 1990
The .a extension specifies an at job.
FILES
/var/adm/cron
Main cron directory.
/usr/lib/cron/at.allow
List of allowed users.
/usr/lib/cron/at.deny
List of denied users.
/var/spool/cron/atjobs
Queue.
EXIT VALUES
The atq command returns the following values:
1−18
0 (zero)
The command completed successfully.
&gt;0
An error occurred.
Hewlett Packard Enterprise
527188-024
User Commands (a - b)
atq(1)
RELATED INFORMATION
Commands: at(1), atrm(1), batch(1), cron(8).
STANDARDS CONFORMANCE
This command is an extension to the XPG4 Version 2 specification.
527188-024
Hewlett Packard Enterprise
1−19
atrm(1)
OSS Shell and Utilities Reference Manual
NAME
atrm - Removes jobs queued by the at command
SYNOPSIS
atrm [-f | -i] -a [ | job_number ... | user ... ]
FLAGS
-a
Removes all jobs belonging to the user invoking atrm. If this flag is specified by a
user with appropriate privileges, all jobs on the queue are removed.
-f
Suppresses the printing of information about the jobs being removed.
-i
Prompts the user before a job is removed; a response of y, or the locale’s equivalent of
y, causes the job to be removed.
DESCRIPTION
The atrm command removes jobs that were put in a queue by the at command. If one or more
job numbers are specified, atrm attempts to remove only those jobs.
If one or more user names are specified, all jobs belonging to those users are removed. This form
of invoking atrm is can be used only if you have appropriate privileges.
Environment Variables
This command supports the use of the LANG, LC_ALL, LC_CTYPE, LC_MESSAGES, and
NLSPATH environment variables.
EXAMPLES
To remove job number super.super.62169200.a, created by user super.super, from the queue
created by the at command, enter:
atrm super.super.62169200.a
Note that .a specifies an at job for sh. (The .e extension specifies an at job for ksh.)
FILES
/var/adm/cron
Main cron directory.
/usr/lib/cron/at.allow
List of allowed users.
/usr/lib/cron/at.deny
List of denied users.
/var/spool/cron/atjobs
Queue.
EXIT VALUES
The atrm command returns the following values:
0 (zero)
The command completed successfully.
&gt;0
An error occurred.
RELATED INFORMATION
Commands: at(1), atq(1), batch(1), cron(8).
STANDARDS CONFORMANCE
This command is an extension to the XPG4 Version 2 specification.
1−20
Hewlett Packard Enterprise
527188-024
User Commands (a - b)
awk(1)
NAME
awk - Manipulates text and matches patterns in files
SYNOPSIS
awk -f program [-Fcharacter] [file ...]
awk [-Fcharacter] statement ... [file ...]
FLAGS
-Fcharacter
Uses character as the field separator character (a space by default).
-f program
Searches for the patterns and performs the actions found in the file program.
DESCRIPTION
The awk command provides a flexible text-manipulation language suitable for simple report generation. It is a more powerful tool for text manipulation than either sed or grep.
The awk command:
•
Performs convenient numeric processing.
•
Allows variables within actions.
•
Allows general selection of patterns.
•
Allows control flow in the actions.
•
Does not require any compiling of programs.
Pattern-matching and action statements can be specified either on the command line or in a program file. In either case, awk first reads all matching and action statements, then reads a line of
input and compares it to each specified pattern. If the line matches a specified pattern, awk performs the specified actions and writes the result to standard output. When it has compared the
current input line to all patterns, it reads the next line.
The awk command reads input files in the order stated on the command line. If you specify a
filename as a - (dash) or do not specify a filename, awk reads standard input.
Enclose pattern-action statements on the command line in ’’ (single quotes) to protect them from
interpretation by the shell. Consecutive pattern-action statements on the same command line
must be separated by a ; (semicolon), within one set of quotes. Consecutive pattern-action statements in an awk program file must appear on separate lines.
You can assign values to variables on the awk command line as follows:
variable=value
The awk command treats input lines as fields separated by spaces, tabs, or a field separator you
set with the FS variable. (Consecutive spaces are recognized as a single separator.) Fields are
referenced as $1, $2, and so on. $0 refers to the entire line.
527188-024
Hewlett Packard Enterprise
1−21
awk(1)
OSS Shell and Utilities Reference Manual
Pattern-Action Statements
Pattern-action statements follow the form:
pattern {action}
If a pattern lacks a corresponding action, awk writes the entire line that contains the pattern to
standard output. If an action lacks a corresponding pattern, awk applies the action to every line.
Actions
An action is a sequence of statements that follow C language syntax. These statements can
include:
if (expression) statement [ else statement ]
while (expression) statement
for (expression;expression;expression) statement
for (variable in array) statement
break
continue
{ [ statement ... ] }
variable=expression
print [ expression_list ] [ &gt;file ] [ | command ]
printf format[ ,expression_list ] [ &gt;file | &gt;&gt;file | | command ]
next
exit [ expression ]
delete array [ expression ]
Statements can end with a semicolon, a newline character, or the right brace enclosing the action.
Expressions can have string or numeric values and are built using the operators +, -, , /, %, and ˆ
(exponentiation), a space for string concatenation, and the C operators ++, --, +=, -=, , /=, %=, ˆ=,
*=, &gt;, &gt;=, &lt;, &lt;=, ==, !=, and ?:.
Because the actions process fields, input white space is not preserved in the output.
The file and command arguments can be literal names or expressions enclosed in parentheses.
Identical string values in different statements refer to the same open file.
The print statement writes its arguments to standard output (or to a file if &gt; file or &gt;&gt; file is
present), separated by the current output field separator and terminated by the current output
record separator.
The printf statement writes its arguments to standard output (or to a file if &gt;file or &gt;&gt;file is
present, or to a pipe if | command is present), separated by the current output field separator, and
terminated by the output record separator. file and command can be literal names or
parenthesized expressions. Identical string values in different statements denote the same open
file. You can redirect the output into a file using the print ... &gt; file or printf ( ... ) &gt; file statements. The printf statement formats its expression list according to the format of the printf( )
subroutine.
1−22
Hewlett Packard Enterprise
527188-024
User Commands (a - b)
awk(1)
Variables
Variables can be scalars, array elements (denoted x[i]), or fields.
Variable names can consist of uppercase and lowercase alphabetic letters, the underscore character, the digits (0 to 9), and extended characters. Variable names cannot begin with a digit.
Variables are initialized to the null string. Array subscripts can be any string; they do not have to
be numeric. This approach allows for a form of associative memory. Enclose string constants in
expressions in &quot;&quot; (double quotes). Multiple subscripts such as [i,j,k] are permitted; the constituents are concatenated and separated by the value of SUBSEP (see the description in the following list).
There are several variables with special meaning to awk. They include:
ARGC
Argument count, assignable.
ARGV
Argument array, assignable; nonnull members are interpreted as filenames.
FS
Input field separator (default is a space). If it is a space, then any number of spaces and
tabs can separate fields.
NF
The number of fields in the current input line (record), with a limit of 99.
NR
The number of the current input line (record).
FNR
The number of the current input line (record) in the current file.
FILENAME
The name of the current input file.
RS
Input record separator (default is a newline character).
OFS
The output field separator (default is a space).
ORS
The output record separator (default is a newline character).
OFMT
The output format for numbers (default % .6g).
SUBSEP
Separates multiple subscripts (default is 031).
Functions
Functions are defined at the position of a pattern-action statement, as follows:
function foo(a, b, c) { ... ; return x }
Arguments are passed by value if scalar and by reference if array name; functions can be called
recursively. Arguments are local to the function; all other variables are global.
There are several built-in functions that can be used in awk actions. (For information about regular expressions as referred to in this subsection, see the grep(1) refeernce page.)
length(argument)
Returns the length, in characters, of argument, or of the entire line if there is no argument.
blength(argument)
Returns the length, in bytes, of argument, or of the entire line if there is no argument.
527188-024
Hewlett Packard Enterprise
1−23
awk(1)
OSS Shell and Utilities Reference Manual
close(argument)
Closes the file or pipe expression. Note that you must enclose a filename in double
quotes when redirecting output with the awk command; otherwise, it is treated as an
awk variable. For example:
print &quot;Hello&quot; &gt; &quot;/tmp/junk&quot;
close (&quot;/tmp/junk&quot;)
exp(number)
Takes the exponential of its argument.
rand
Returns a random number on (0, 1).
srand(number)
Sets seed for rand. The default is the time of day.
log(number)
Takes the base e logarithm of its argument.
sqrt(number)
Takes the square root of its argument.
int(number)
Takes the integer part of its argument.
substr(string,position,number)
Returns the substring number characters long of string, beginning at position.
index(string,string2)
Returns the position in string where string2 occurs, or 0 (zero) if it does not occur.
match(string,regular_expression)
Returns the position in string where regular_expression occurs, or 0 (zero) if it does
not occur. The RSTART and RLENGTH built-in variables are set to the position and
length, in bytes, of the matched string.
split(string,a,[regular_expression])
Splits string into array elements a[1], a[2], . . ., a[number], and returns number. The
separation is done with the specified regular expression or with the FS field separator if
regular_expression is not given.
sub(regular_expression,string2,[string])
Substitutes string2 for the first occurrence of the regular expression regular_expression
in string. If string is not given, the entire line is used.
gsub(regular_expression,string2,[string])
Same as sub except that all occurrences of the regular expression are replaced; both
sub and gsub return the number of replacements.
sprintf(fmt,expression1,
expression2, ...)&quot; Formats the expressions according to the printf format string fmt and
returns the resulting string.
system(command)
Executes command and returns its exit status.
The getline function sets $0 to the next input record from the current input file; getline &lt; file sets
$0 to the next record from file. getline x sets variable x instead. Finally, command | getline
pipes the output of command into getline. Each call of getline returns the next line of output
1−24
Hewlett Packard Enterprise
527188-024
User Commands (a - b)
awk(1)
from command. In all cases, getline returns 1 for a successful input, 0 (zero) for End-of-File, and
-1 for an error.
Patterns
Patterns are arbitrary Boolean combinations of patterns and relational expressions (the !, |, and &amp;
operators and parentheses for grouping). You must start and end regular expressions with
slashes. You can use regular expressions as described for the grep command, including the following special characters:
+
One or more occurrences of the pattern.
?
Zero or one occurrence of the pattern.
Either of two statements.
()
Grouping of expressions.
Isolated regular expressions in a pattern apply to the entire line. Regular expressions can occur
in relational expressions. Any string (constant or variable) can be used as a regular expression,
except in the position of an isolated regular expression in a pattern.
If two patterns are separated by a comma, the action is performed on all lines between an
occurrence of the first pattern and the next occurrence of the second.
Regular expressions can contain extended (multibyte) characters with one exception: range constructs in character class specifications using brackets cannot contain multibyte extended characters. Individual instances of extended (multibyte) characters can appear within brackets; however, extended characters are treated as separate one-byte characters.
Inclusion of extended characters in ranges is determined by the collating sequence as defined by
the current locale. The wild-card characters , +, and ? match characters and character strings, not
bytes.
There are two types of relational expressions you can use. The first type has the form:
expression match_operator pattern
where match_operator is either: ˜ (for contains) or !˜ (for does not contain).
The second type has the form:
expression relational_operator expression
where relational_operator is any of the six C relational operators: &lt;, &gt;, &lt;=, &gt;=, ==, and !=. A
conditional can be an arithmetic expression, a relational expression, or a Boolean combination of
these expressions.
You can use the BEGIN and END special patterns to capture control before the first and after the
last input line is read, respectively. BEGIN must be the first pattern; END must be the last.
BEGIN and END do not combine with other patterns.
You have two ways to designate a character other than white space to separate fields. You can
use the -Fcharacter flag on the command line, or you can start program with the following
sequence:
BEGIN { FS = c }
Either action changes the field separator to c.
527188-024
Hewlett Packard Enterprise
1−25
awk(1)
OSS Shell and Utilities Reference Manual
There are no explicit conversions between numbers and strings. To force an expression to be
treated as a number, add 0 (zero) to it. To force it to be treated as a string, append a null string
(&quot;&quot;).
EXAMPLES
1.
To display the lines of a file longer than 72 bytes, enter:
awk ’length &gt;72’ chapter1
This command selects each line of the file chapter1 that is longer than 72 bytes. awk
then writes these lines to standard output because no action is specified.
2.
To display all lines between the words start and stop, enter:
awk ’/start/,/stop/’ chapter1
3.
To run an awk program (sum2.awk) that processes a file (chapter1), enter:
awk -f sum2.awk chapter1
4.
To print the first two fields of a file named filename in reverse order, enter:
awk ’{ print $2, $1 }’ filename
5.
The following awk program prints the first two fields of the input file in reverse order,
with input fields separated by a comma and a space, then adds up the first column and
prints the sum and average:
BEGIN { FS = &quot;,[ ]*|[ ]+&quot; }
{ print $2, $1}
{ s += $1 }
END
{ print &quot;sum is&quot;, s, &quot;average is&quot;, s/NR }
RELATED INFORMATION
Commands: grep(1), nawk(1), sed(1).
Functions: printf(3).
Files: locale(4).
1−26
Hewlett Packard Enterprise
527188-024
User Commands (a - b)
banner(1)
NAME
banner - Creates a large banner
SYNOPSIS
banner message
DESCRIPTION
The banner command prints the specified message in large letters on the standard output file.
Each line in the banner can be up to 10 uppercase or lowercase characters long. On output, all
characters appear in uppercase, with the lowercase input characters appearing smaller than the
uppercase input characters. The banner command displays only ASCII characters.
EXAMPLES
1.
To display a one-word banner, enter:
banner SMILE
2.
To display more than one word on a line, enclose the text in quotes, for example:
banner &quot;Out to&quot; Lunch
This command displays Out to on one line and Lunch on the next line.
RELATED INFORMATION
Commands: echo(1).
STANDARDS CONFORMANCE
This command conforms to the XPG4 Version 2 specification with the following exceptions:
527188-024
•
Only one message string is allowed.
•
The format of the output is specified.
Hewlett Packard Enterprise
1−27
basename(1)
OSS Shell and Utilities Reference Manual
NAME
basename - Returns specified parts of pathnames
SYNOPSIS
basename string [suffix]
DESCRIPTION
The basename command reads the string specified on the command line, deletes the portion
from the beginning to the last / (slash), and writes the base filename to standard output. If suffix
is specified on the command line and suffix appears in string, the string is returned with the suffix
removed.
The basename command is generally used inside command substitutions within a shell procedure to specify an output filename that is some variation of a specified input filename.
EXAMPLES
1.
To display the base filename of a shell variable, enter:
basename $WORKFILE
This command displays the base filename of the value assigned to the WORKFILE
shell variable. If WORKFILE is set to /u/gabe/program.c, then program.c is
displayed.
2.
To construct, in a shell script, a filename that is the same as another filename except for
its suffix, enter:
OFILE=‘basename $1 .c‘.o
This command assigns to OFILE the value of the first positional parameter ($1), but
with its .c suffix changed to .o. If $1 is /u/jim/program.c, then OFILE becomes
program.o.
RELATED INFORMATION
Commands: dirname(1), sh(1).
1−28
Hewlett Packard Enterprise
527188-024
User Commands (a - b)
batch(1)
NAME
batch - Runs commands at a system-determined later time
SYNOPSIS
batch
DESCRIPTION
The batch command reads from the standard input file the names of commands to be run at a
later time. The batch command runs these jobs when the system load level permits.
The batch command is equivalent to the following at command:
at -q b now
Queue b is an at queue for batch jobs.
The user redirects the errors and output from these jobs.
Variables in the shell environment, the current directory, umask, and ulimit are retained when
the commands are run. Open file descriptors, traps, and priority are lost.
You can use batch if your login name appears in the /usr/lib/cron/at.allow file. If that file does
not exist, batch checks the /usr/lib/cron/at.deny file to determine if your login name is denied
access to batch. The at.allow and at.deny files contain one login name per line.
If neither file exists, only a user with appropriate privileges can submit a job. If the at.allow file
does exist, the login name of a user with appropriate privileges must be included in it for that
user to be able to use the command.
Environment Variables
This command supports the use of the LANG, LC_ALL, LC_CTYPE, LC_MESSAGES,
LC_TIME, and NLSPATH environment variables.
EXAMPLES
To execute a command when the system load level permits, enter:
batch
cat infile &gt; outfile
&lt;EOF&gt;
where &lt;EOF&gt; is the End-of-File character.
FILES
/var/adm/cron
Main cron directory.
/usr/lib/cron/at.allow
List of allowed users.
/usr/lib/cron/at.deny
List of denied users.
/var/spool/cron/atjobs
Queue.
NOTES
The batch utility does not accept jobs submitted from processes whose login user ID is different
from the real user ID.
EXIT VALUES
The batch command returns the following exit values:
0 (zero)
The batch utility successfully finished its processing.
&gt;0
An error occurred. The job will not be scheduled.
527188-024
Hewlett Packard Enterprise
1−29
batch(1)
OSS Shell and Utilities Reference Manual
RELATED INFORMATION
Commands: at(1), atq(1), atrm(1), cron(8), kill(1), ps(1), sh(1).
STANDARDS CONFORMANCE
This commmand conforms to the XPG4 Version 2 specification with extensions, except for the
following features:
1−30
•
Mail notification does not occur.
•
The SHELL and TZ environment variables are not used.
Hewlett Packard Enterprise
527188-024
User Commands (a - b)
bc(1)
NAME
bc - Arbitrary-precision arithmetic language processor
SYNOPSIS
bc [-cl] [file ...]
The bc command is an interactive program that provides unlimited precision arithmetic. It is
a preprocessor for the dc command.
FLAGS
-c
Compiles file, but does not invoke dc.
-l
Includes a library of mathematical functions and initializes scale to 20, instead of the
default of 0 (zero).
DESCRIPTION
The bc command invokes dc automatically, unless the -c (compile only) flag is specified. If the
-c flag is specified, the output from bc goes to the standard output.
The bc command lets you specify an input and output base in decimal, octal, or hexadecimal
with the ibase and obase keywords (the default is decimal). The command also has a scaling
provision for decimal point notation through the scale keyword. The syntax for bc is similar to
that of the C language.
The bc command takes input first from the specified file. This input file can contain additional
functions besides internal functions such as sqrt and length, and functions included in the math
library. When bc reaches the end of the input file, it reads standard input.
The following are valid items that can be used in the input file and for standard input. In the following description of syntax for bc, letter means one of the ASCII letters a-z.
The combination of a \ (backslash) character immediately followed by a newline character
delimits lexical tokens with the following exceptions:
•
When it is interpreted as a literal newline character in STRING tokens
•
When it is ignored as part of a multiline NUMBER token
Comments
Comments are enclosed in /* and */.
Names
Simple variables: letter
Array elements: letter[expression]
The words ibase, obase, and scale
Other Operands
Arbitrarily long numbers with optional sign and decimal point.
(expression)
sqrt (expression)
length (expression)
Number of significant decimal digits
scale (expression)
Number of digits to right of decimal point
letter (expression,...,expression)
527188-024
Hewlett Packard Enterprise
1−31
bc(1)
OSS Shell and Utilities Reference Manual
Operators
+ - * / % ˆ (% is remainder; ˆ is power)
++ -- (prefix and suffix; apply to names)
== &lt;= &gt;= != &lt;&gt;
= =+ =- =* =/ =% ˆ=
+= -= *= /= %=
Statements
expression
{statement;...;statement}
if (expression) statement
while (expression) statement
for (expression;expression;expression) statement
(null statement)
break
quit
The statement following a for or while statement must begin on the same line.
Function Definitions
define letter (letter,...,letter) {
auto letter,...,letter
statement;...statement
return ( expression )
}
Functions in -l Math Library
s(x)
sine
c(x)
cosine
e(x)
exponential
l(x)
log
a(x)
arctangent
j(n,x)
Bessel function
General Syntax
All function parameters are passed by value.
The value of a statement that is an expression is displayed unless the main operator is an assignment. A semicolon or newline character separates statements. Assignments to scale control the
number of decimal places printed on output and maintained during multiplication, division, and
exponentiation. Assignments to ibase or obase set the input and output number radix, respectively.
The same letter may refer to an array, a function, and a simple variable simultaneously.
Automatic variables are pushed down during function calls. All other variables are global to the
program. When you use arrays as function parameters, or define them as automatic variables,
empty brackets must follow the array name.
1−32
Hewlett Packard Enterprise
527188-024
User Commands (a - b)
bc(1)
All for statements must have all three expressions.
The quit statement is interpreted immediately, not when bc is evaluating statements.
EXAMPLES
When you enter bc expressions directly from the keyboard, press the End-of-File key sequence to
end the bc session and return to the shell command line.
1.
To use bc as a calculator, proceed as follows:
Enter:
bc
1/4
The system responds as follows:
0
Enter:
scale = 1 /* Keep 1 decimal place */
1/4
The system responds as follows:
0.2
Enter:
scale = 3 /* Keep 3 decimal places */
1/4
The system responds as follows:
0.250
Enter:
16+63/5
The system responds as follows:
28.600
Enter:
(16+63)/5
The system responds as follows:
15.800
Enter:
71/6
The system responds as follows:
11.833
527188-024
Hewlett Packard Enterprise
1−33
bc(1)
OSS Shell and Utilities Reference Manual
Enter:
1/6
The system responds as follows:
0.166
You may type the comments (enclosed in /* */), but they are provided only for your
information. The bc command displays the value of each expression when you press
&lt;Return&gt;, except for assignments. Exit by typing quit followed by &lt;return&gt;
2.
To convert numbers from one base to another, proceed as follows:
Enter:
bc
obase = 16
/* Display numbers in Hexadecimal */
ibase = 8 /* Input numbers in Octal */
12
The system responds as follows:
A
Enter:
123
The system responds as follows:
53
Enter:
123456
The system responds as follows:
A72E
3.
To write and run C-like programs, proceed as follows:
Create the following file prog.bc:
/* compute the factorial of n */
define f(n) {
auto i, r;
r = 1;
for (i=2; i&lt;=n; i++) r =* i;
return (r);
}
Note that the statement following a for or while statement must begin on the same line.
1−34
Hewlett Packard Enterprise
527188-024
User Commands (a - b)
bc(1)
Enter:
bc -l prog.bc
This statement interprets the bc program saved in prog.bc, then reads more bc command
statements from standard input (the keyboard). Starting the bc command with the -l flag
makes the math library available. This example uses the e (exponential) function from
the math library, and f is defined in the program prog.bc.
Enter:
e(2) /* e squared */
The system responds as follows:
7.38905609893065022723
Enter:
f(5) /* 5 factorial */
The system responds as follows:
120
Enter:
f(10) /* 10 factorial */
The system responds as follows:
3628800
4.
To convert an infix expression to Reverse Polish Notation (RPN), enter:
Enter:
bc -c
(a * b) % (3 + 4 * c)
The system responds as follows:
lalb* 3 4lc*+%ps.
This statement compiles the bc infix-notation expression into an expression that the dc
command can interpret. dc evaluates extended RPN expressions. In the compiled output, the lowercase l before each variable name is the dc subcommand to load the value of
the variable onto the stack. The p displays the value on top of the stack, and the s. discards the top value by storing it in register . (dot). You can save the RPN expression in a
file for dc to evaluate later by redirecting the standard output of this command.
FILES
/usr/lib/lib.b
Mathematical library.
/bin/dc
Desk calculator proper; uses bc as preprocessor.
RELATED INFORMATION
Commands: dc(1).
527188-024
Hewlett Packard Enterprise
1−35
bg(1)
OSS Shell and Utilities Reference Manual
NAME
bg - Causes processes to run in the background
SYNOPSIS
bg [job ...]
DESCRIPTION
The bg command causes stopped processes specified as job to run in the background. If no process is specified as job, the most recently stopped process is restarted as a background process.
(See Jobs for a description of the format of job.)
EXAMPLES
1.
The following command restarts, as a background process, the previously stopped job
whose job number is 149.
bg %149
NOTES
The bg command is a shell built-in command. It differs from the regular commands in that it does
not open a new shell process when it executes.
A general discussion of shell built-in commands and a list of the OSS shell built-in commands
are in the reference page for sh(1).
RELATED INFORMATION
Commands: jobs(1), sh(1).
1−36
Hewlett Packard Enterprise
527188-024
User Commands (a - b)
break(1)
NAME
break - Exits from for, while, until, or select loop
SYNOPSIS
break [n]
DESCRIPTION
Exits from the enclosing for, while, until, or select loop, if any. If n is specified, breaks at the
nth enclosing level.
EXAMPLES
1.
The following shell script demonstrates the use of the break command to exit from a
loop:
for x in 1 2 3 4 5
do
if [ $x != 3 ]
then
print $x
else
break
fi
done
EXIT VALUES
If an invalid argument is specified, the exit value is greater than 0 (zero).
NOTES
•
Parameter assignment lists that precede the command remain in effect when the command completes.
•
I/O redirections are processed after parameter assignments.
•
Errors cause a script that contains the commands so marked to abort.
The break command is a shell built-in command. It differs from the regular commands in that it
does not open a new shell process when it executes.
A general discussion of shell built-in commands and a list of the OSS shell built-in commands
are in the reference page for sh(1).
RELATED INFORMATION
Commands: sh(1).
527188-024
Hewlett Packard Enterprise
1−37
Section 2. User Commands (c)
This section contains reference pages for the Open System Services (OSS) user
commands with names starting with the letter c.
527188-024
Hewlett Packard Enterprise
2−1
c89(1)
OSS Shell and Utilities Reference Manual
NAME
c89 - Compiles C and C++ programs using the native compilers
SYNOPSIS
c89
[-c | -Wnolink ]
[ [ -D name[=&quot;value&quot; ] ] ... ] [ -E ] [ -g ]
[-I directory ... ]
[-L directory ... ] [ -o outfile ] [ -O ] [ -s ]
[-U name ]
[-Wallow_cplusplus_comments ]
[-Wallow_extern_explicit_instantiation ]
[-Wansistreams ]
[-Wbasename ]
[-WBdllsonly | -WBdynamic | -WBstatic ]
[-Wbitfield_container=value ]
[-Wbuild_neutral_library ]
[-WC ]
[-Wc99lite ]
[-Wcall_shared | -Wnon_shared | -Wshared ]
[-Wcodecov ]
[-Wcolumns=c ]
[-Wcplusplus ]
[-WDname[=&quot;value&quot; ] ]
[-Wdryrun ]
[-Weld=args ]
[-Weld_obey=file ]
[-Wenv=env ]
[-Werrors=e ]
[-W[no]extensions ]
[-Wextern_data={no_gp | gp_ok} ]
[-Wfieldalign=align ]
[-Wforce_static_typeinfo ]
[-Wforce_static_vtbl ]
[-Wforce_vtbl | -Wsuppress_vtbl ]
[-Wglobalized ]
[-WH ]
[-Wheap=n[b | w | p ]
[-Whelp | -Wusage ]
[-Whighpin={on | off} ]
[-Whighrequesters={on | off} ]
[-WIEEE_float | -WTandem_float ]
[-Wilp32 | -Wlp64 ]
[-W[no]include_whole ]
[-W[no]inline ]
[-Winline_compiler_generated_functions ]
[-Winline_limit=n ]
[-Winline_string_literals ]
[-W[no]innerlist ]
[-W[no]inspect ]
[-Wkr ]
[-Wld=&quot;args&quot; ]
[-Wld_obey=&quot;file&quot; ]
[-Wlines=l ]
2−2
Hewlett Packard Enterprise
527188-024
User Commands (c)
c89(1)
[-W[no]list ]
[-WM ]
[-W[no]map ]
[-Wmigration_check ]
[-Wmigration_check=32to64 ]
[-WmoduleCatalog=&quot;catalog_spec&quot; ]
[-WmoduleGroup[=&quot;[group_spec&quot; ] ] ]
[-WmoduleSchema=&quot;schema_spec&quot; ]
[-WmoduleTableSet[=&quot;[tableset_spec&quot; ] ] ]
[-WmoduleVersion[=&quot;[version_spec&quot; ] ] ]
[-Wmultibyte_char ]
[-Wmxcmp[=&quot;args&quot; ] ]
[-Wmxcmp_add=&quot;args&quot; ]
[-Wmxcmp_files=&quot;file&quot;[,...] ]
[-Wmxcmp_querydefault=&quot;attr_name=attr_value&quot;[,...] ]
[-Wnld=&quot;args&quot; ]
[-Wnld_obey=&quot;file&quot; ]
[-Wnoexceptions ]
[-Wnomain ]
[-Wnostdinc ]
[-Wnostdlib ]
[-WOlimit=value ]
[-Woptfile=&quot;filename ]
[-Woptimize=&quot;opt ]
[-W[no]optional_lib ]
[-W[no]overflow_traps ]
[-WP ]
[-Wpool_string_literals ]
[-Wprofdir=name ]
[-Wprofgen ]
[-Wprofuse[=filename] ]
[-Wr ]
[-W[no]reexport ]
[-Wrefalign=ref ]
[-WRefMemFuncsOnly ]
[-W[no]remarks ]
[-Wrunnamed ]
[-WRVU={g-series-rvu | h-series-rvu | l-series-rvu} ]
[-W[no]saveabend ]
[-Wsavetemps ]
[-Wsql[=&quot;args&quot; ] ]
[-Wsqlcomp[=&quot;args&quot; ] ]
[-Wsqlmx[=&quot;args&quot; ] ]
[-Wsqlmxadd[=&quot;args&quot; ] ]
[-Wsrl ]
[-W[no]stdfiles ]
[-W[no]suppress ]
[-Wsyntax ]
[-Wsystype={guardian | oss} ]
[-Wtarget=platform ]
[-Wtimestamp=value ]
[-Wu=&quot;symbol_name&quot; ]
[-Wv ]
527188-024
Hewlett Packard Enterprise
2−3
c89(1)
OSS Shell and Utilities Reference Manual
[-Wverbose ]
[-Wversion1 | -Wversion2 | -Wversion3 ]
[-Ww ]
[-W[no]warn[=w [,w] ... ] ]
[-Wx ]
[-Wxld=args ]
[-Wxld_obey=file ]
operand . . .
FLAGS
-c | -Wnolink
Compiles the specified C or C++ source files but suppresses linking, even if another
flag specifies linking.
You cannot specify the -c flag if you use the -Wshared flag.
-D name[=&quot;value&quot; ]
Defines the preprocessor symbol name as value. It is equivalent to a #define directive
in the source. If no value is given, name is defined as 1. The -D flag has lower precedence than the -U flag. Thus, if name is specified in both a -U and a -D flag, name is
undefined regardless of the order of the flags.
Use this flag to define compiler feature-test macros.
When the NonStop SQL/MX preprocessor is invoked, all -D specifications are
automatically passed to the preprocessor as the preprocessor’s -d options.
-E
Preprocesses the specified source files. No compilation or linking is performed. Output is sent to the standard output file and contains #line directives.
If the -Wsql flag is specified, embedded NonStop SQL/MP statements are processed.
If the -Wsqlmx flag is specified, embedded NonStop SQL/MX statements are processed.
The -WH and -WM flags override the -E flag.
-g
Produces in the object or executable files information (symbol tables) used for symbolic debugging.
-I directory
Adds directory to the list of directories searched to locate #include files with relative
pathnames. (Relative pathnames do not begin with a slash, ’/’). #include filenames
enclosed in double quotes are searched for first in the directory of the file with the
#include directive, then in directories named with -I flags, and last in the standard
include directories. #include filenames enclosed in angle brackets (&lt;&gt;) are searched
for first in directories named with -I flags and then in the standard include directories.
Refer to the Standard Include Directories subsection for details.
-L directory
Adds directory to the list of directories searched to locate libraries specified by
operands of the form -l library. See the Operands subsection for details.
-o outfile Uses the pathname outfile instead of the default pathname a.out for the name of the
output object file.
If only one source file is specified and the -c flag is specified, the generated output is
placed into outfile. Only one -o flag can be specified. The file specified cannot be an
SQL preprocessing output file.
If a single source file is compiled and linked in one invocation of c89, and if the outfile
2−4
Hewlett Packard Enterprise
527188-024
User Commands (c)
c89(1)
is the same name as that of the input object file, c89 issues a warning message and
places the output in a temporary file.
-O
Sets the compiler to optimization level 2. This flag is equivalent to a -Woptimize=2
flag.
-s
Strips symbolic information not required for proper execution from object and executable files. The resulting object file cannot be debugged using a symbolic debugger.
This flag is ignored if the -Wr flag is also specified.
-U name Removes any initial definition of the preprocessor symbol name. The -U flag has
higher precedence than the -D flag. If name is specified in both a -U and a -D flag,
name is undefined regardless of the order of the flags.
-Wallow_cplusplus_comments
Directs the compiler to allow comments that use the C++ comment style in C source
files.
-Wallow_extern_explicit_instantiation
Allows an extern storage attribute to be applied to an explicit template instantiation.
This flag suppresses the instantiation of the template. If this flag is omitted, the template is instantiated.
-Wansistreams
Generates a Guardian program that opens text files as type 180 instead of type 101 if
-Wsystype=guardian is specified. (By default Guardian programs open text files as
type 101.) This flag is ignored when -Wsystype=oss is used. OSS programs can open
text files only as type 180.
-Wbasename
Directs the compiler to place only the last part of the source file name, known as the
basename, into the dynamic information (DYN) file when the instrumented process
runs.
If you use the -Wbasename option and the -Wprofgen option to compile a source file,
you also must use the -Wbasename option when you use the -Wprofuse option to
compile this source file. When you use the -Wbasename option, the source file is not
required to be in the same location as it was when you compiled the file using the
-Wprofgen option, but the basename must be the same.
If you did not use both the -Wbasename and the -Wprofgen options when you compiled this source file, do not specify the -Wbasename flag when you compile this
source file with the -Wprofuse flag. If you do not use the -Wbasename flag, when you
compile the source file and specify the -Wprofuse flag, the source file must be in the
same location as it was when you used the -Wprofgen flag to compile the file.
This flag is valid only for TNS/E- and TNS/X-targeted compilations. For more information about profile-guided optimization and the rules for using the -Wbasename flag,
see the Code Profiling Utilities Manual.
-WBdllsonly
Tells the ld or eld linker to limit searches to position-independent code (PIC) files that
are dynamic-link libraries (DLLs) when resolving the file names specified for the -l
operands and -L flags.
If a file name is qualified, the linker searches for a DLL with that name.
If a filename is unqualified, in each search path, the linker first searches for a DLL with
the file name as specified in the -l operand or -L flag. If the linker cannot find a DLL,
527188-024
Hewlett Packard Enterprise
2−5
c89(1)
OSS Shell and Utilities Reference Manual
the file name is unqualified, and the search path is not in the Guardian file system (/G),
then the linker prefixes lib and suffixes .so to the file name and searches again. If the
linker still cannot find the DLL, it searches the path again with the same prefix but with
.srl as the suffix. For more information on search paths, see the Finding Libraries
subsection of the ld(1) or eld(1) reference page under DESCRIPTION.
When a DLL cannot be found, the linker issues an error message unless its
-allow_missing_libs flag is specified.
The -WBdllsonly, -WBdynamic, and -WBstatic flags are search control toggles.
Multiple flags can be specified in a single linker invocation; the behavior specified
remains in effect until another flag in the set is specified. Thus, you can search for both
DLLs and archive files for some -l operands and -L flags and search for just archive
files for others. The default library search control is -WBdynamic.
-WBdynamic
Specifies that the linker utility uses dynamic linking when searching for libraries
specified in subsequent operands of the form -l library. Dynamic linking is in effect
until a -WBstatic flag is specified. -WBdynamic is the default setting. Refer to the
Dynamic and Static Linking subsection for details.
-WBstatic
Specifies that the linker utility uses static linking when searching for libraries specified
in subsequent operands of the form -l library. Static linking is in effect until a
-WBdynamic flag is specified. -WBdynamic, not -WBstatic, is the default setting.
Refer to the Dynamic and Static Linking subsection for details.
-Wbitfield_container=value
Directs the compiler to accept larger and more flexible bit fields where value is one of
the following:
int
Directs the compiler to pack bit fields into 32-bit ints. In this mode,
the compiler will not accept bit fields larger than 32 bits. The compiler
returns an error for any bit field declared to be of type long long
(unless the -Wextensions flag is also specified). The compiler returns
warnings for other non-standard integer types.
long
Directs the compiler to pack bit fields whose base type is larger than
32-bits into 64-bit ints. All other bit fields will be packed into 32-bit
ints. In this mode, the compiler accepts the long long and long bitfield types and up to 64 bits in length. The compiler returns warnings
for other non-standard integer types.
all
Directs the compiler to pack all bit fields into ints defined by their base
type. The compiler will accept any integer type for a bit field. This
mode provides additional compatibility with the various methods other
compilers may use to pack bit fields.
The default value is int except when the -Wlp64 flag is specified, in which case the
default becomes long.
Note: The above rules apply to bit fields declared in auto or platform (the
default) structs. Any bit field declared in a shared2 struct will continue
to follow shared2 rules. Bit fields in shared2 structs can never be larger
than 32-bits. Bit fields declared in shared8 structs can be larger than
32-bits (if the value is long or long), but the compiler will emit a warning. Bit fields in shared8 structs will be packed as before except that bit
fields larger than 32-bits will be packed into 64-bit containers.
2−6
Hewlett Packard Enterprise
527188-024
User Commands (c)
c89(1)
This flag is supported on systems running L15.02 or later L-series RVUs,
J06.13 or later J-series RVUs, or H06.24 or later H-series RVUs only.
-Wbuild_neutral_library
Specifies that the compiler should issue an error message when it encounters any
exported or imported interface in a DLL that depends on types marked as being incompatible with the neutral C++ dialect.
This flag is valid only for TNS/E- and TNS/X-targeted C++ compilations and only
when the -Wversion2 or -Wversion3 flag is also used.
-WC
Retains comments when preprocessing files. Comments are removed from preprocessor output by default.
-Wc99lite
Enables selected c99 features. This flag:
•
Must not be used with the -Wsql or the Wkr flag.
•
Has an effect only when you compile C source code. It has no effect when you
compile C++ source code and no diagnostic message is issued when you use
this flag when you compile C++ source code.
•
Has an effect only if you also specify either the -Wtarget=ipf flag or the
-Wtarget=tns/e flag, or either the -Wtarget=x86 flag or the -Wtarget=tns/x
flag. If you specify the -Wtarget=mips or the -Wtarget=tns/r flag, the compiler issues a warning message.
If you want to use c99 features not offered through the -Wc99lite option, you must use
the c99 utility. For more information about c99 utility, see the c99(1) reference page.
-Wcall_shared | -Wnon_shared | -Wshared
Directs the compiler to create a specific type of object file:
-Wcall_shared Specifies that the object file should be a PIC file; the ld, eld, or xld
linker is invoked. If the -c flag is also specified, the file is a linkfile.
Otherwise, the file is an executable object file (loadfile).
This is the default behavior for a TNS/E- and TNS/X-targeted compilation.
You cannot use this flag if you use the -Wsrl flag.
-Wnon_shared
Specifies that the object file should not be a PIC file; the nld linker is
invoked. You can use this flag only for a TNS/R-targeted compilation;
this flag is ignored when specified for a TNS/E- and TNS/X-targeted
compilation.
This is the default behavior for a TNS/R-targeted compilation.
-Wshared
Specifies that the file should be a PIC DLL; the ld, eld, or xld linker is
invoked. You cannot use this flag if you use the -c or -Wsrl flag.
-Wcodecov
Directs the compiler to create an instrumented object file and to create or add to an
existing SPI file. This flag has an effect only if you also specify either the
-Wtarget=ipf flag or the -Wtarget=tns/e flag or either -Wtarget=x86 flag or the
-Wtarget=tns/x flag.
527188-024
Hewlett Packard Enterprise
2−7
c89(1)
OSS Shell and Utilities Reference Manual
The first time the -Wcodecov flag is used to compile a program on TNS/E systems, the
compiler creates a Static Profiling Information (SPI) file. This file is one of the input
files for the Code Coverage tool. If the program is compiled in an OSS directory:
•
The default name for the SPI file is pgopti.spi.
•
If the default file is not write-accessible, the name of the SPI file created is
tpopti.spi.
•
A lock file called pgopti.spl. When compilation is complete, the compiler
deletes this file.
If the program is compiled in a Guardian directory:
•
The default name for the SPI file is pgospi.
•
If the default file is not write-accessible, the name of the SPI file created is
tpgospi.
•
A lock file called pgospl. When compilation is complete, the compiler deletes
this file.
If the SPI file already exists when the program is compiled with the -Wcodecov flag,
the compiler updates or adds information to the existing SPI file. If more than one SPI
file exists for the same program, you must concatenate the files manually before you
can use the resulting file as input to the Code Coverage Tool.
For more information about the Code Coverage Tool, see the Code Profiling Utilities
Manual.
The .spi file is neither created in TNS/X compilations or needed by the TNS/X Code
Coverage Tool.
-Wcolumns=c
Specifies the maximum number of columns in input source files to process. c is in the
range 20 through 32767. Text in columns beyond column c is ignored.
-Wcplusplus
Directs c89 to assume that files with a .c or .i suffix contain C++ source code, and
defines the feature-test macro _ _cplusplus. If linking occurs, this flag directs the
linker utility to search the C++ standard run-time library.
If this flag is omitted and none of the operand filenames end in .C, .cpp, .cc, or .cxx,
then source files are compiled as C files only and, if -c is not specified, are only linked
with the C standard library. See Standard Libraries for details.
-WDname[=&quot;value&quot; ]
Specifies a macro that is defined only during the NonStop SQL/MX preprocessing step.
See the HPE NonStop SQL/MX Programming Manual for C and COBOL for details
about its -d flag=[value] option. This flag can be specified more than once.
Note that all -D values that are supplied to c89 are automatically passed as -d options
to the NonStop SQL/MX preprocessor.
This flag is ignored unless the -Wsqlmx flag is also specified.
2−8
Hewlett Packard Enterprise
527188-024
User Commands (c)
c89(1)
-Wdryrun
Verifies the syntax and semantics of flags and operands specified to c89 and enables the
-Wv flag. No compilation system components are run.
-Weld=&quot;args&quot;
Passes the arguments specified in args to the eld utility after any other arguments are
passed. This flag is valid only for TNS/E-targeted compilations.
Use this flag to pass arguments to eld when creating a PIC file. c89 does not check the
validity of eld arguments.
You can only use this flag when you use one of the following flags:
-Wcall_shared or -Wshared
This flag is ignored when the command does not initiate linking.
-Weld_obey=&quot;file&quot;
Directs the eld utility to read additional command-line arguments from the command
file specified in the file argument. The arguments are processed as if they had been
passed directly to eld in place of file. c89 does not verify the existence or readability
of file.
The -Weld_obey flag is valid only for TNS/E-targeted compilations. You can only use
this flag if you use one of the following flags:
-Wcall_shared or -Wshared
This flag is ignored when the command does not initiate linking.
-Wenv=env
Specifies the run-time environment. env can be one of common, embedded, library,
or libspace. The default value is common.
-Werrors=e
Stops compiling when e errors have been encountered.
-W[no]extensions
Enables [disables] Hewlett Packard Enterprise extensions. If -Wextensions is
specified, c89 also defines the HPE NonStop _TANDEM_SOURCE feature-test
macro. The default value is -Wnoextensions.
-Wextern_data={no_gp | gp_ok}
Determines the addressing method for external data references (objects declared
extern). The default value is no_gp. This flag applies to TNS/R-targeted compilations
only.
Setting gp_ok specifies that external data references use GP-relative addressing.
GP-relative addressing can increase program performance. gp_ok cannot be specified
for native user libraries or when the -Wcall_shared or -Wshared flag is used.
-Wfieldalign=align
Specifies the field alignment for structures. align can be one of auto, cshared2,
shared2, shared8, or platform. The default value is auto. You cannot specify a
struct tag with this flag.
-Wforce_static_typeinfo
Specifies that the typeinfo variables are to be static in the object file. This flag applies
only to variables that are not part of an exported or imported class.
527188-024
Hewlett Packard Enterprise
2−9
c89(1)
OSS Shell and Utilities Reference Manual
-Wforce_static_vtbl
Specifies that the virtual function tables that are created by the compiler are to be static
in the object file and are not exported. This flag applies only to variables that are not
part of an exported or imported class.
-Wforce_vtbl | -Wsuppress_vtbl
Controls whether virtual function tables are created in cases where the compiler cannot
determine the need for the tables.
The virtual function table for a class is defined in a compilation if the compilation contains a definition of the first noninline, nonpure virtual function of the class. For
classes that contain no such function, the default behavior is to define the virtual function table (but to define it as a local static entity).
The flag -Wsuppress_vtbl suppresses the definition of the virtual function tables for
such classes, and the flag -Wforce_vtbl forces the definition of the virtual function
table for such classes. The -Wsuppress_vtbl flag is valid only for C++ compilations.
The -Wforce_vtbl flag forces definition of virtual function tables in cases where the
heuristic used by the compiler to decide on definition of virtual function tables provides no guidance. The -Wforce_vtbl flag differs from the default behavior in that it
does not force the definition to be local. The -Wforce_vtbl flag is valid only for C++
compilations.
-Wglobalized
Specifies that the code generated by the compiler is preemptable. By default, compilers generate code that is not preemptable. Preemptable code allows named references in a DLL to resolve to externally-defined code and data items instead of to
resolve to its own internally-defined code and data items. Preemptable code is less
efficient than code that is not preemptable, and is only needed in a few instances when
creating a DLL.
This flag has an effect only if you also specify either the -Wtarget=ipf flag or the
-Wtarget=tns/e flag, or either the -Wtarget=x86 flag or the -Wtarget=tns/x flag.
-WH
Preprocesses the specified source files and prints the names of header files, as opened,
to the standard error file. No compilation or linking is performed. Unlike the -WP
flag, no preprocessed files with .i (for C) or .ii (for C++) suffixes are produced.
The -WH flag overrides the -E and -WP flags.
-Wheap=n[b | w | p ]
Specifies the value that the linker should use for the HEAP_MAX attribute of the output file. n can be any positive value that gives a size valid for the NonStop server node
on which the file is used.
The size can be specified in units of:
b
Bytes; this is the default unit
w
Words
p
Pages
-Whelp | -Wusage
Displays help information on how to run c89. No compilation system components are
run.
2−10
Hewlett Packard Enterprise
527188-024
User Commands (c)
c89(1)
-Whighpin={on | off }
Directs the linker utility to set the HIGHPIN attribute to on or off in the output object
files. This attribute specifies whether the object file will run at a high PIN or a low
PIN. If -Wsystype=guardian is used, the default setting is -Whighpin=off. If
-Wsystype=oss is used, the default setting is -Whighpin=on. This flag is set only if an
executable object file is produced.
-Whighrequesters={on | off }
Directs the linker utility to set the HIGHREQUESTERS attribute to on or off in the
output object file. This attribute specifies whether the object file supports requests
from requesters running at a high PIN. The object file must contain the main( ) function. If -Wsystype=guardian is used, the default setting is -Whighrequesters=off. If
-Wsystype=oss is used, the default setting is -Whighrequesters=on. This flag is set
only if an executable object file is produced.
-WIEEE_float | -WTandem_float
Specifies the floating-point format to be used by the compiler for values of type float or
type double. The differences between the two formats are summarized in the float(4)
reference page.
IEEE floating-point values can include NaN and infinity, and the sign of 0.0 (zero) can
be either positive or negative. Refer to the fp_class(3) reference page for a description
of IEEE value classes.
Guardian functions are available to convert between floating-point formats. For a discussion of floating-point conversions, see to the Guardian Programmer’s Guide.
On systems with processors that support IEEE Std 754-1985 floating-point format data,
the compiler uses that format when -WIEEE_float is specified. Specifying
-WTandem_float selects Hewlett Packard Enterprise’s proprietary Tandem floatingpoint format.
On systems without processors that support IEEE Std 754-1985 floating-point format
data, the -WIEEE_float flag is not available. Use of the -WIEEE_float flag on such
systems produces an error diagnostic.
The -WIEEE_float flag cannot be used when the -Wsql or -Wsqlcomp flag is
specified.
The default setting is -WTandem_float for TNS/R-targeted compilations and
-WIEEE_float for TNS/E- and TNS/X-targeted compilations.
-Wilp32 | -Wlp64
Specifies the data model to be used: 32-bit (ilp32) or 64-bit (lp64). The default data
model is ilp32. The following c89 options are not allowed with -Wlp64: -Wsql,
-Wsystype=guardian, or -Wversion2. For more information about data models, see
the C/C++ Programmer’s Guide.
-W[no]include_whole
Tells the ld, eld, or xld linker whether to include in the loadfile all linkable archive
members of all archive libraries encountered after this flag is specified.
Specifying -Winclude_whole begins this linking action. When -Wnoinclude_whole
behavior is in effect, archive searches are controlled by the existence of undefined
symbols. Archives are searched in the order specified on the command line. Symbols
are marked as undefined by compilers or by the user through the -Wu flag or the ld
linker -u flag. When an archive member is found that resolves an undefined symbol,
the member&acute;s symbols are merged into the external symbol table for the loadfile being
created. After the merge, the undefined symbol that triggered the merge is resolved
527188-024
Hewlett Packard Enterprise
2−11
c89(1)
OSS Shell and Utilities Reference Manual
(marked as defined). The same merge might resolve other undefined symbols or result
in more undefined symbols.
You can stop the linking action of -Winclude_whole by specifying the
-Wnoinclude_whole flag later in the command line or an obey file.
These flags can be specified as many times as needed in the command stream. Providing either flag overrides the current setting, so that the linker actions can be controlled
on a library-by-library basis.
The default setting is -Wnoinclude_whole.
-W[no]inline
Enables [disables] the generation of inline code for C++ functions declared inline and
for C++ member functions declared within their class. This flag does not affect C code
nor does the compiler generate inline functions for other reasons. The default setting is
-Winline.
-Winline_compiler_generated_functions
Allows all compiler-generated functions to be inline. Specifying this flag does not
guarantee that a function can be inlined. If this flag is omitted, compiler-generated
functions are not inlined and are exported.
-Winline_limit=n
Specifies the maximum number of lines that the compiler can inline, where n is an
integer in the range 0 through 2147483647. Specifying the value 0 (zero) means there
is no limit.
The -Winline_limit flag is valid only for TNS/R-targeted C++ compilations.
-Winline_string_literals
Allows the compiler to generate an inline function when a function takes the address of
a string literal. Specifying this flag does not guarantee that a function can be inlined.
If a function is inlined by this specification, its program will not conform to section
7.1.2 of the 1998 ISO C++ standard.
-W[no]innerlist
Enables [disables] the generation of instruction code mnemonics in the listing text
immediately following each corresponding statement. This flag is ignored unless
-Wnosuppress is specified. The default setting is -Wnoinnerlist.
-W[no]inspect
Designates [does not designate] the symbolic debugger as the default debugger for the
output object file. Use this flag with the -g flag. The default setting is -Wnoinspect.
This flag is set only if an executable object file is produced.
-Wkr
Directs the C compiler to process C source files according to the traditional Kernighan
and Ritchie C or Common C rules, instead of according to ISO/ANSI Standard C.
-Wld=&quot;args&quot;
Passes the arguments specified in args to the ld utility after any other arguments are
passed. This flag is valid only for TNS/R-targeted compilations.
Use this flag to pass arguments to ld when creating a PIC file. c89 does not check the
validity of ld arguments.
2−12
Hewlett Packard Enterprise
527188-024
User Commands (c)
c89(1)
You can only use this flag when you use one of the following flags:
-Wcall_shared or -Wshared
This flag is ignored when the command does not initiate linking.
-Wld_obey=&quot;file&quot;
Directs the ld utility to read additional command-line arguments from the command
file specified in the file argument. The arguments are processed as if they had been
passed directly to ld in place of file. c89 does not verify the existence or readability of
file.
This flag is valid only for TNS/R-targeted compilations. This flag does not invoke ld.
If the ld utility is not invoked, this flag is ignored. Use this flag to pass arguments to ld
when creating a PIC TNS/R native program or dynamic-link library (DLL).
You can only use this flag if you use one of the following flags:
-Wcall_shared or -Wshared
This flag is ignored when the command does not initiate linking.
-Wlines=l
Specifies the maximum number of lines on a listing page, if a listing is generated. l
must be in the range 10 through 32767.
-W[no]list
Temporarily enables [disables] the generation of listing text. Both the -Wlist and
-Wnolist flags are ignored unless -Wnosuppress is specified. The default setting is
-Wlist.
-WM
Preprocesses the specified source files and prints a list of files that the specified source
files depend on to the standard output file. The list can be used with the make utility.
No compilation or linking is performed. Unlike the -WP flag, no preprocessed files
with .i (for C) or .ii (for C++) suffixes are produced.
-W[no]map
Enables [disables] the generation of identifier maps in the listing. This flag is ignored
unless the -Wnosuppress flag is specified. The default setting is -Wnomap.
-Wmigration_check
Directs the compiler to perform a migration check on C++ version 2 source files
specified on the command line. The check uses the compiler and header files provided
in Release Version Update (RVU) G06.20 and later to issue warnings where classes or
member functions are used that changed or became obsolete for C++ version 3.
This flag is only valid for C++ version 2 compiles; therefore, when this flag is
specified, the -Wversion2 flag must also be specified. When this flag is used, no other
compiler warning messages are output and no object file is produced.
If listings are not enabled, migration warnings are output only to the standard error file.
If listings are enabled, migration warnings are sent to both the standard error file and
the listing file.
-Wmigration_check=32to64
Directs the compiler to emit additional warnings that detect valid C/C++ code that
potentially may behave in an unexpected manner when code designed for ilp32 is compiled using the lp64 data model. The -Wmigration_check=32to64 flag does not
require the -Wlp64 flag.
527188-024
Hewlett Packard Enterprise
2−13
c89(1)
OSS Shell and Utilities Reference Manual
-WmoduleCatalog=&quot;catalog_spec&quot;
Specifies a NonStop SQL/MX module catalog name. The specified string is used only
if the input file does not contain an SQL/MX module directive or its module directive
does not specify a catalog name. The string cannot contain more than 128 characters.
This flag is valid only for preprocessor release 2.0 and newer.
-WmoduleGroup[=&quot;[group_spec&quot; ] ]
Specifies a string for a NonStop SQL/MX module group specification to use as a prefix
to the module name. The specified string is used only if the input file does not contain
an SQL/MX module directive or its module directive does not specify a group name.
The string cannot contain more than 31 characters.
This flag is valid only for preprocessor release 1.8 and newer.
-WmoduleSchema=&quot;schema_spec&quot;
Specifies a NonStop SQL/MX module schema name. The specified string is used only
if the input file does not contain an SQL/MX module directive or its module directive
does not specify a schema name. The string cannot contain more than 128 characters.
This flag is valid only for preprocessor release 2.0 and newer.
-WmoduleTableSet[=&quot;[tableset_spec&quot; ] ]
Specifies a string for a NonStop SQL/MX tableset specification to use as the first suffix
to the module name. The specified string is used only if the input file does not contain
an SQL/MX module directive or its module directive does not specify a tableset name.
The string cannot contain more than 31 characters.
This flag is valid only for preprocessor release 1.8 and newer.
-WmoduleVersion[=&quot;[version_spec&quot; ] ]
Specifies a string for a NonStop SQL/MX tableset specification to use as the second
suffix to the externally qualified module name that is written to the module file. The
string cannot contain more than 31 characters.
This flag is valid only for preprocessor release 1.8 and newer.
-Wmultibyte_char
Directs the compiler to allow multibyte character sequences in comments, string
literals, and character constants.
-Wmxcmp[=&quot;args&quot;]
Invokes the NonStop SQL/MX compiler to process any file operands of the form file.m
and any module definition files produced when the NonStop SQL/MX preprocessor
was invoked. If the C or C++ compilation detects any errors in the source code, the
NonStop SQL/MX compiler is not invoked.
If a value is supplied for args, it must be one of the following:
2−14
replace
Directs the NonStop SQL/MX compiler to replace the existing module
or create a new one. The default action does not replace an existing
module.
warn
Directs the NonStop SQL/MX compiler to generate a warning rather
than an error if a table does not exist at compilation time.
Hewlett Packard Enterprise
527188-024
User Commands (c)
verbose
c89(1)
Directs the NonStop SQL/MX compiler to display summary information as well as error and warning messages.
If more than one value is specified for args, the values must be separated by commas
without white space.
If the -Wmxcmp flag is specified more than once, only the last occurrence has an
effect. If the -Wmxcmp flag is specified with any of the options that prevent compilation (-E, -WH, -WM, -WP, or -Wsyntax), the -Wmxcmp flag is ignored.
If the -Wmxcmp flag is specified, the -Wsql and -Wsqlcomp flags cannot be used.
-Wmxcmp_add=&quot;args&quot;
Specifies a string to pass to the NonStop SQL/MX compiler without validation or
change.
-Wmxcmp_files=&quot;file&quot;[,...]
Passes MDF files specified to mxcmp in release 1 compilation mode. Passes all
specified files without the .m extension to mxCompileUserModule in release 2 compilation mode.
-Wmxcmp_querydefault=&quot;attr_name=attr_value&quot;[,...]
Specifies attribute settings (CONTROL QUERY DEFAULT settings) to pass to the
NonStop SQL/MX compiler. These attribute settings override any corresponding
entries in the SYSTEM_DEFAULTS table.
-Wnld=&quot;args&quot;
Passes the arguments specified in args to the nld utility after any other arguments are
passed. This flag is valid only for TNS/R-targeted compilations.
This flag does not invoke nld. If the nld utility is not invoked, this flag is ignored. Use
this flag to pass arguments to nld when creating a TNS/R native non-PIC program or
user library. c89 does not check the validity of nld arguments.
You cannot use this flag if you use the following flags:
-Wcall_shared or -Wshared
-Wnld_obey=&quot;file&quot;
Directs the nld utility to read additional command-line arguments from the command
file specified in the file argument. The arguments are processed as if they had been
passed directly to nld in place of file. c89 does not verify the existence or readability
of file.
This flag is valid only for TNS/R-targeted compilations. This flag does not invoke nld.
If the nld utility is not invoked, this flag is ignored. Use this flag to pass arguments to
nld when creating a TNS/R native non-PIC program or user library.
You cannot use this flag if you use any of the following flags:
-Wcall_shared or -Wshared
-Wnoexceptions
Disables support for exceptions and exception handling. This flag can improve application performance by removing unneeded processing steps when an application does
not use exceptions or perform exception handling.
This flag affects only C++ programs compiled with the version 2 or version 3 dialect of
C++; it is ignored for C programs and C++ programs compiled using the version 1
dialect.
527188-024
Hewlett Packard Enterprise
2−15
c89(1)
OSS Shell and Utilities Reference Manual
-Wnomain
Specifies that the object file should be linked without a main( ) function. This flag
prevents the compiler from specifying to the linker those modules and libraries that
provide customary run-time support for C or C++ programs. The resulting file has no
_MAIN function and no standard run-time libraries unless those are specified
separately in a file identified by the:
•
-Wxld_obey=file flag or in an obey file used by the xld utility
•
-Weld_obey=file flag or in an obey file used by the eld utility
•
-Wld_obey=file flag or in an obey file used by the ld utility
•
-Wnld_obey=file flag or in an obey file used by the nld utility
-Wnostdinc
Suppresses the searching of the standard include directories to locate included files.
Refer to the Standard Include Directories subsection for details.
-Wnostdlib
Suppresses the searching of the standard library directories to locate libraries. Refer to
the Standard Library Directories subsection for details.
-WOlimit=value
Specifies the maximum decimal number of basic blocks of a routine that the global
optimizer will optimize. When a routine has more basic blocks than this number, it is
not optimized and a warning message is printed.
When the -WOlimit flag is specified, either the -O or -Woptimize=2 flags must also be
specified.
When the -WOlimit flag is not specified, an optimized routine can contain at most
2500 basic blocks. When a routine has more basic blocks than this number, it is not
optimized but a warning message is not printed.
The -WOlimit flag is only valid for TNS/R-targeted compilations.
-Woptfile=&quot;filename&quot;
Specifies an optimizer file, which contains a list of functions that are to be optimized at
the level specified in the file. The optimizer file can raise or lower the optimize level
for the given functions.
Functions in the module that are not listed in the optimizer file are compiled at the level
given in the -Woptimize flag, or, if no -Woptimize flag is specified, at the default
optimize level.
Each line of the optimizer file can contain only one function name and the optimize
level (0, 1, or 2) that you want for that function. The function name must be the internal name used for linking; for C++ programs, the mangled name must be used.
-Woptimize=opt
Specifies the optimization level. opt can be one of the following:
0
2−16
Disables optimization. This level is useful when you are developing
and debugging your program. Hewlett Packard Enterprise recommends
this for serious debugging.
Hewlett Packard Enterprise
527188-024
User Commands (c)
c89(1)
1
Enables those optimizations that still all most symbolic debugging to
work. This is the default.
2
Enables all optimizations. Symbolic debugging capability will be limited. The -O flag is equivalent to -Woptimize=2.
-W[no]optional_lib
Indicates whether a library specified in the command stream should be considered
optional when the ld or eld linker creates a loadfile.
When -Wnooptional_lib behavior is in effect, any library specified in a -l or -lib flag is
included in the .liblist section of the loadfile being created. When -Woptional_lib
behavior is in effect, a specified library can be omitted from the .liblist section of the
loadfile being created if omitting it would not affect how symbolic references are
resolved.
These flags can be specified as many times as needed in the command stream. Providing either flag overrides the current setting, so that the linker actions can be controlled
on a library-by-library basis.
If a library is specified more than once, and at least one specification occurs when
-Wnooptional_lib is in effect, the library is included in the .liblist section of the
loadfile being created.
The default behavior is -Wnooptional_lib.
-W[no]overflow_traps
Enables [disables] overflow traps. The default setting is -Wnooverflow_traps.
-WP
Preprocesses the specified source files. No compilation or linking is performed. Output is placed in corresponding files with .i (for C) or .ii (for C++) suffixes in the current
working directory.
If the -Wsql flag is specified, embedded NonStop SQL/MP statements are processed.
If the -Wsqlmx flag is specified, embedded NonStop SQL/MX statements are processed.
The -E, -WH, and -WM flags override the -WP flag.
-Wpool_string_literals
Specifies that, within a compilation unit, multiple occurences of the same string literal
should occupy the same storage space. This flag applies to C++ compilations only; it
is ignored when C++ is not used.
The default assignment for multiple occurrences of a string literal gives them separate
storage space.
-Wprofdir=name
Specifies the location in which to create the dynamic information (DYN) file when the
-Wprofgen flag directs the compiler to generate instrumented code. If the application
is to run in the Guardian environment, name must be a string that specifies a valid
Guardian subvolume. Otherwise, name must be a string that specifies a valid OSS
directory. If an invalid name is specified, no profiling information will saved.
If this flag is not specified, the DYN file is created in the default Guardian subvolume
or the current OSS working directory for the process.
If object files that were compiled with different profdir locations are linked together,
when the application is run, the DYN file is created in the location specified by one of
profdir flags. However, it is not possible to predict which profdir location will be
used.
527188-024
Hewlett Packard Enterprise
2−17
c89(1)
OSS Shell and Utilities Reference Manual
This flag is valid only for TNS/E- and TNS/X-targeted compilations. For more information about profile-guided optimization, see the Code Profiling Utilities Manual.
-Wprofgen
Directs the compiler to generate instrumented code, used for profile-guided optimization. All or part of an application can be instrumented by turning this flag on or off for
individual compilations of object files. These object files can be linked into programs
or DLLs.
Instrumented code references symbols defined in the public DLL named zpgodll
(TNS/E) or xpgodll (TNS/X). When you link any program or DLL that contains instrumented code, the zpgodll (TNS/E) or xpgodll (TNS/X) DLL must be specified at link
time. On TNS/X, you must also link in pgo.a. The zpgodll (TNS/E) or xpgodll
(TNS/X) DLL is automatically linked when you specify the -Wcodecov or -Wprofgen
flags.
When you use the -Wprofgen flag and you use the compiler to automatically invoke
the eld (TNS/E) or xld (TNS/X) linker to build a program or DLL, the compiler passes
the -l pgo option to eld (TNS/E) or /*Lxld/*O.
Hewlett Packard Enterprise recommends that you do not combine code that has been
compiled with the -Wcodecov flag with code that has been compiled with the -Wprofgen flag in the same application.
This flag is valid only for TNS/E- and TNS/X-targeted compilations. For more information about profile-guided optimization, see the Code Profiling Utilities Manual.
-Wprofuse[=filename]
Directs the compiler to generate optimized code based on information in a dynamic
profiling information (DPI) file. This flag cannot be specified with either the
-Wcodecov or the -Wprofgen flags.
The DPI file is always in the current Guardian subvolume or OSS directory. You can
specify the name of the DPI file using the filename variable. If you do not specify a
filename, the name of the DPI file defaults to:
•
pgopti.dpi if the compilation is done in an OSS directory that is not a Guardian
subvolume.
•
pgodpi if the current OSS working directory is a Guardian subvolume.
This flag is valid only for TNS/E- and TNS/X-targeted compilations. For more information about profile-guided optimization, see the Code Profiling Utilities Manual.
-Wr
Passes the -r option to the linker, which directs the linker to create a linkable object file
instead of an executable object file (the default).
-W[no]reexport
Tells the ld or eld linker whether to mark any library specified in a -l operand or -L flag
after this flag for reexport in its libList entry in the loadfile being created. Specifying
-Wnoreexport leaves the library unmarked; specifying -Wreexport marks the library.
Reexport is a run-time attribute that is used by the rld loader to decide what DLLs it
needs to load.
-Wnoreexport is the default action.
These flags can be specified as many times as needed in the command stream. Providing either flag overrides the current setting, so that the linker actions can be controlled
on a library-by-library basis.
2−18
Hewlett Packard Enterprise
527188-024
User Commands (c)
c89(1)
-Wrefalign=ref
Specifies the global reference alignment for pointers. ref can be either 2 or 8. The
default value is 8.
-WRefMemFuncsOnly
Specifies that the compiler provide debug information for referenced member functions
only. If this flag is not used, the compiler provides debug information for all member
functions in a class. This flag can be used to reduce the size of the debug region. You
must also specify the -g flag for this flag to have an effect.
-W[no]remarks
Enables [disables] compiler remark messages. Remark messages are informative diagnostics that are less severe than warnings and errors. The default setting is -Wnoremarks.
-Wrunnamed
Directs the linker utility to set the RUNNAMED ON attribute in the output object file.
This attribute specifies that the object file runs as a named process. The default attribute setting is RUNNAMED OFF. The RUNNAMED ON attribute is set only if an
executable object file is produced.
-WRVU={g-series-rvu|h-series-rvu|l-series-rvu}
Sets the value of the _L_SERIES_RVU, _H_SERIES_RVU, or _G_SERIES_RVU
feature test macro. These feature test macros are used in HPE NonStop standard header
files to determine whether declarations that depend on a specific RVU are available.
No checking is performed to determine whether the specified RVU actually exists. The
default value for this flag is the G-series RVU or the H-series RVU in which the compiler was last released. If you are running the G-series version of the c89( ) command,
specify the equivalent H-series RVU. If you are running the G-series version of the
c89( ) command, you can specify a G-series RVU for the -WRVU flag only. If you are
running the J-series or H-series version of the c89( ) command, you can specify either a
G-series RVU or an H-series RVU for the -WRVU flag.
If you specify a G-series RVU:
•
You must specify the value in the form G06.nn—for example
-WRVU=G06.28.
•
For a C module compilation, this option causes the compiler to issue an error,
instead of a warning, for implicitly declared functions.
If you specify an H-series RVU:
•
You must specify the value in the form H06.nn—for example
-WRVU=H06.05.
•
The -Wtarget flag is not required, but if you do specify it, you must specify
TNS/E for the value. If you specify TNS/E for the value of the -Wtarget flag,
but you specify a G-series RVU for the value of the -WRVU flag, the -WRVU
flag is ignored. If you specify TNS/R for the value of the -Wtarget flag, but
you specify an H-series RVU for the value of the -WRVU flag, the -WRVU
flag is ignored.
•
For a C module compilation, this option causes the compiler to issue an error,
instead of a warning, for implicitly declared functions.
If you specify an L-series RVU:
527188-024
Hewlett Packard Enterprise
2−19
c89(1)
OSS Shell and Utilities Reference Manual
•
You must specify the value in the form Lyy.mm, where yy is the year and mm is
the month. For example -WRVU=L15.02.
•
For a C module compilation, this option causes the compiler to issue an error,
instead of a warning, for implicitly declared functions.
-W[no]saveabend
Specifies that a saveabend (process snapshot) file is [is not] created if the program terminates abnormally. The default setting is -Wnosaveabend. This flag is meaningful
only if an executable object file is produced.
-Wsavetemps
Saves all temporary and intermediate files created by compilation system components.
Use the -Wv flag to display the filenames.
-Wsql[=&quot;args&quot; ]
Enables NonStop SQL/MP support when processing C source files. It has no effect on
C++ source files. The C source files are processed by the C SQL processor (sqlcfe).
Arguments specified in args are passed to the processor without being checked for
validity. This flag sets the -Wextensions flag. If this is a TNS/E- or TNS/X-targeted
compilation, specifying this flag also implicitly sets -Wtandem_float.
The -Wsql flag cannot be used when the -WIEEE_float, -Wmxcmp, or -Wsqlmx flag
is specified.
-Wsqlcomp[=&quot;args&quot; ]
Invokes the NonStop SQL/MP compiler (sqlcomp) if not suppressed by another flag.
A file that has already been linked can be processed by the NonStop SQL/MP compiler; for example:
c89 -Wsqlcomp -c exefile
Arguments specified in args are passed to the NonStop SQL/MP compiler without
being checked for validity. NonStop SQL/MP compiler error messages are sent to the
standard error file. Note that C++ does not support embedded SQL.
-Wsqlmx[=&quot;args&quot; ]
Invokes the NonStop SQL/MX mxsqlc preprocessor before compilation for any file
operands of the form file.sql, file.ec, file.eC, file.ecpp, file.ecxx, or file.ec++. If an argument is specified, it must be one of the following:
listing
Directs the preprocessor to write its diagnostic messages to a file
named file.eL in addition to the standard error file, where file is the
name of the primary source file.
noansi_varchars
Directs the preprocessor to turn off generation of ANSI varchar data.
This option is valid only for preprocessor release 1.8 and newer.
noline
Directs the preprocessor to suppress generation of #line directives in
the preprocessed output source file that it creates.
null_terminate
Directs the preprocessor to terminate host variable strings with a
NULL before fetch operations into them.
This option is valid only for preprocessor release 1.8 and newer.
2−20
Hewlett Packard Enterprise
527188-024
User Commands (c)
c89(1)
preprocess_only
Directs the preprocessor to suppress all steps after preprocessing.
This option is valid only for preprocessor release 2.0 and newer.
process_includes
Directs the SQL/MX preprocessor to process one level of include files.
This setting applies only to include files for SQL definitions; it does
not apply to include file processing performed by the C/C++ compiler.
refrain_r2
Directs the SQL/MX preprocessor to use only the rules and features
that apply to preprocessors prior to release 2.0. The default action is to
use only the rules and features that apply to preprocessors beginning
with release 2.0.
This option is valid only for preprocessor release 2.0 and newer.
IEEE_float
Directs the SQL/MX preprocessor to use IEEE floating-point format
instead of Tandem floating-point format. This option is valid only for
preprocessor release 2.0 and newer.
For preprocessors before release 2.0, the default floating-point format
is the same as that of the c89 compiler (Tandem format on G-series
systems, IEEE format on H-series systems). For preprocessors beginning with release 2.0, the default floating-point format is IEEE format.
If more than one argument is specified, the arguments must be separated by commas
without any white space.
The -Wsqlmx flag cannot be specified when the -Wsql or -Wsqlcomp flag is specified.
-Wsqlmxadd[=&quot;args&quot; ]
Specifies a string to pass to the SQL/MX preprocessor without validation or change.
-Wsrl
Directs the compiler to generate a TNS/R native user library file (a special shared runtime library, or SRL, file), instead of an executable file. If the -Wsrl flag is specified to
create a native user library, a -Wnld=-ul flag is also required.
This flag is valid only for TNS/R-targeted compilations. You cannot specify this flag if
you specify the -Wcall_shared or -Wshared flag.
-W[no]stdfiles
Generates a Guardian program that opens [does not open] the standard input, output,
and error files by default. You can specify this flag only if -Wsystype=guardian is
also specified. The default setting is -Wstdfiles.
-W[no]suppress
Disables [enables] the generation of listings. The listing is placed in a file in the
current working directory with the same name as the source, but with a suffix of .L.
The default setting is -Wsuppress.
-Wsyntax
Performs only a syntax check. No code is generated.
-Wsystype={guardian | oss }
Specifies the target execution environment. This flag selects definitions used during
compilation, program startup code, default libraries, and system routines used during
linking. The default setting is -Wsystype=oss. (To run files compiled for a Guardian
TNS/R target execution environment, you must set the file code to 700 with a FUP
ALTER filename, CODE 700 command from a TACL prompt. To run files compiled
527188-024
Hewlett Packard Enterprise
2−21
c89(1)
OSS Shell and Utilities Reference Manual
for a Guardian TNS/E target execution environment, you must set the file code to 800
with a FUP ALTER filename, CODE 800 command from a TACL prompt. To run
files compiled for a Guardian TNS/X target execution environment, you must set the
file code to 500 with a FUP ALTER filename, CODE 500 command from a TACL
prompt.)
-Wtarget=platform
Specifies the system architecture for which code should be generated. The possible
values are:
-Wtarget=tns/r | mips
Generate native mode code for a G-series (MIPS RISC) server. This is
the default specification on G-series nodes. This is not available on Lseries RVUs.
-Wtarget=tns/e | ipf
Generate native mode code for an H-series (Itanium EPIC) server.
This is the default specification on H-series nodes.
-Wtarget=tns/x | x86
Generate native mode code for an HPE NonStop X (x86) server. This
is only available on L-series nodes and is the default specification.
The -Wtarget flag is supported for systems running L-series or H-series RVUs only.
-Wtimestamp=value
Provides a creation timestamp for the NonStop SQL/MX preprocessor that is written to
the two output files created by the preprocessor. See the HPE NonStop SQL/MX Programming Manual for C and COBOL for details about the form for the value allowed
for the timestamp. If this option is specified more than once, only the last occurrence
has an effect. Note that c89 does not check that value is valid; it relies on the NonStop
SQL/MX preprocessor to validate this argument.
This flag is ignored unless the -Wsqlmx flag is also specified.
-Wu=&quot;symbol_name&quot;
Tells the ld or eld linker to add symbol_name as an undefined symbol. This causes the
linker to search for this symbol in any archive libraries that are specified after this flag
on the command line or in an obey file.
The search constraint specified by the -Wu flag is overridden by use of the
-Winclude_whole flag.
-Wv
Echoes the command line to the standard error file as each component of the compilation system is run.
-Wverbose
Echoes the command line to the standard error file as each component of the compilation system is run and causes additional output and listings from the SQL compiler to
be sent to the standard output file. SQL compiler error messages are sent to the standard error file.
-Wversion1 | -Wversion2 | -Wversion3
Specifies which C++ dialect to compile.
-Wversion1 specifies the original version, released with D40. This is the default for
systems with a Release Version Update (RVU) prior to G06.00. This value is only
valid for TNS/R-targeted C++ compilations.
-Wversion2 specifies the dialect released with D45. This version supports such
2−22
Hewlett Packard Enterprise
527188-024
User Commands (c)
c89(1)
features as the bool type, namespaces, and exceptions.
-Wversion3 specifies the dialect released with G06.20. This version supports an
ANSI/ISO Standard C++ Library corresponding to ISO/IEC IS 14882. This is the
default for TNS/R systems beginning with RVU G06.00, for TNS/E systems beginning
with RVU H06.01, and for TNS/X systems beginning with RVU L15.02.
These three dialects are not compatible.
All modules of a C++ program must be compiled and linked using the same dialect.
-Ww
Suppresses the printing of compiler warning messages. This flag overrides any
-Wwarn or -Wnowarn flags.
-W[no]warn[=w [,w ] ... ]
For each w value that appears, this flag enables [disables] the compiler warning message specified by w.
Declaring a w value enables [disables] the specified message. Specifying -Wwarn
[-Wnowarn] by itself enables [disables] all compiler warning messages.
If -Wwarn=w is specified, then -Wnowarn must also be specified or the -Wwarn=w
flag is ignored. If -Wnowarn=w is specified, then -Wwarn need not be specified.
If white space is present after the commas, the list of warning message numbers should
be enclosed in quotation marks.
-Wwarn is the default specification for this flag. -Ww overrides the -W[no]warn flag.
-Wx
Strips part of the symbol table from the output object file but keeps information necessary for the object file to be used as input to a linker utility again. This flag is typically
used with -Wr.
-Wxld=&quot;args&quot;
Passes the arguments specified in args to the xld utility after any other arguments are
passed. This flag is valid only for TNS/X-targeted compilations.
Use this flag to pass arguments to xld when creating a PIC file. c89 does not check the
validity of xld arguments.
You can only use this flag when you use one of the following flags:
-Wcall_shared or -Wshared
This flag is ignored when the command does not initiate linking.
-Wxld_obey=&quot;file&quot;
Directs the xld utility to read additional command-line arguments from the command
file specified in the file argument. The arguments are processed as if they had been
passed directly to xld in place of file. c89 does not verify the existence or readability
of file.
The -Wxld_obey flag is valid only for TNS/X-targeted compilations. You can only use
this flag if you use one of the following flags:
-Wcall_shared or -Wshared
This flag is ignored when the command does not initiate linking.
Multiple instances of the -D, -I, and -U flags and of the -l operands can be specified.
The position of -l library operands within a list of flags affects the order in which the libraries are
searched.
The order of specifying the -I and -L flags is significant.
527188-024
Hewlett Packard Enterprise
2−23
c89(1)
OSS Shell and Utilities Reference Manual
Quotation marks around string values in flags are optional but recommended to avoid errors
caused by shell substitutions or deletions.
Refer to the C/C++ Programmer’s Guide for details.
DESCRIPTION
c89 is a driver program for the native C and C++ language compilation system. This reference
page describes using c89 in the OSS environment.
c89 performs simple validation of the flags and operands from the arguments on its command
line and, depending on those arguments, invokes components of the language compilation system. c89 does not verify the existence of files it passes to compilation system components. It
does verify that the operand suffix identifies a valid operand to pass to compilation system components. c89 and the components it runs issue messages to the standard error file.
c89 performs the following steps:
1.
If the corresponding -W flag is specified, invokes an SQL preprocessor to process any
embedded SQL statements in C or C++ source files, creating C only, C++ only, or
module definition files as appropriate.
2.
Compiles any specified C and C++ source files or source files produced by Step 1 into
object files.
3.
If the -Wmxcmp flag is specified, invokes the NonStop SQL/MX compiler to process
files created by Step 1 or specified as module definition files in the command.
4.
Links the object files together with any libraries specified on the command line. (This
occurs if no flags that prevent linking are specified and the source files are compiled
without errors.)
5.
If the -Wsqlcomp flag is specified, invokes the NonStop SQL/MP compiler to process
files created by Step 1 or specified in the command.
6.
Writes an executable object file or library to the file specified by a -o flag (if present) or
to the file a.out.
Libraries can be:
•
Archives, with a suffix of .a
•
DLLs, with a suffix of .so
•
TNS/R native user libraries
•
TNS/R native SRLs, with a suffix of .srl
The default executable file in the Guardian file system is aout in the subvolume from which c89
is invoked.
If only a single source file is given and no flags that suppress linking are specified, then the file is
compiled into an object file and linked into an executable object file. If the executable file is
created successfully, the object file is removed.
c89 places object files (loadfiles) in the current working directory with the same base name as the
corresponding source file, but with a suffix of .o.
c89 also names several temporary or intermediate files that are created during the compilation
process. Like the output object file, c89 places these files in the current working directory. c89
removes these temporary or intermediate files unless the -Wsavetemps flag is specified.
If -Wsystype=oss is set, the C and C++ compilers define the predefined feature-test macros
2−24
Hewlett Packard Enterprise
527188-024
User Commands (c)
c89(1)
_OSS_TARGET and _XOPEN_SOURCE. If -Wsystype=guardian is set, the C and C++ compilers define the predefined feature-test macros _GUARDIAN_TARGET and
_TANDEM_SOURCE. These macros are used in the standard header files to determine the execution environment of a program. The feature-test macros can also be defined with a -D flag.
Because these macros are defined internally, not by c89, the macros are not defined when
-Wdryrun or -Wv are used.
Dynamic and Static Linking
The -WBdllsonly and -WBdynamic flags specify dynamic linking. The -WBstatic flag specifies
static linking. In dynamic linking:
•
The nld utility first searches for a shared run-time library (SRL). If an SRL cannot be
found, nld then searches for an archive file. If neither of these files are found, an error is
issued. In static linking, nld searches for an archive file but does not search for an SRL.
•
The ld, eld, or xld utility first searches for a dynamic-link library (DLL). If a DLL cannot be found, the linker then searches for an archive file. If neither of these files are
found, an error is issued. In static linking, the linker searches for an archive file but does
not search for a DLL.
If the archive file cannot be found, an error is issued.
Dynamic and static linking are not exact opposites. Dynamic linking accepts either an SRL or
DDL or an archive, but static linking accepts only an archive.
Unlike other c89 flags, multiple -WBdllsonly, -WBdynamic, and -WBstatic flags can be
specified in a single c89 invocation. Thus, it is possible to perform dynamic linking for some -l
operands and static linking for others.
The -WBdllsonly, -WBdynamic, and -WBstatic flags specified to c89 affect linking arguments
specified in -Wxld, -Wxld_obey, -Weld, -Weld_obey, -Wld, -Wnld, -Wld_obey, or
-Wnld_obey flags. Each specification remains in effect until another is encountered. To change
how a linker performs linking for such arguments, you can specify xld, eld, ld, or nld flags that
control linking within the argument list. All linkers perform dynamic linking by default. See the
xld(1), eld(1), ld(1), or nld(1) reference page for more information.
Handling of Files in the Guardian File System
Files in the Guardian file system can be accessed using OSS pathname syntax
(/G/volume/subvol/fileID).
c89 requires that files in the Guardian file system be identified with a suffix as is done in the OSS
file system. Because Guardian filenames do not allow the .suffix format, the period is dropped
and the suffix becomes the last character of the filename. However, the .suffix format must be
used when specifying the file to c89.
Thus, the Guardian file system file $VOL.SUBVOL.FILEC, which identifies a C source file, is
specified to c89 as /G/VOL/SUBVOL/FILE.c. Likewise, c89 generates an object file
$VOL.SUBVOL.FILEO that can be specified to c89 again as /G/VOL/SUBVOL/FILE.o.
The default executable object file when the current working directory is in the Guardian file system is aout.
Predefined Preprocessor Symbols and Macros
c89 defines the following preprocessor symbols and feature-test macros:
_ _cplusplus
Directs the preprocessor to process the source text as C++ source code. c89 defines
this symbol if the -Wcplusplus flag is specified or the name of an OSS source file ends
in a C++ suffix (.ii, .C, .cpp, .c++, .cxx, .cc, .eC, .ecpp, .ec++, .ecc, or .ecxx).
527188-024
Hewlett Packard Enterprise
2−25
c89(1)
OSS Shell and Utilities Reference Manual
_TANDEM_SOURCE
Makes visible to the preprocessor identifiers required or permitted by extensions made
by HPE NonStop. c89 defines this feature-test macro if the -Wextensions flag is
specified.
_XOPEN_SOURCE
Makes visible to the preprocessor identifiers required or permitted by extensions made
by the XPG4 specification. c89 defines this feature-test macro by default unless the
-Wsystype=guardian flag is specified.
There are other feature-test macros defined by the compiler itself, not by c89. These feature-test
macros do not appear in the output of -Wv and -Wdryrun flags. Refer to the C/C++
Programmer’s Guide for further information on feature-test macros.
Operands
An operand is in the form of:
•
A pathname
•
-l library
•
-WBdllsonly
•
-WBdynamic
•
-WBstatic
At least one operand of the pathname form must be specified. The following operands are supported:
file
A file that has been linked but has not been processed by the NonStop SQL/MP compiler
file.a
An archive library of object files typically produced by the ar command and passed
directly to a linker utility
file.c
A C language source file to be preprocessed, compiled, and optionally linked; embedded NonStop SQL/MP information might be present
file.C
A C++ language source file to be preprocessed, compiled, and optionally linked
file.cc
A C++ language source file to be preprocessed, compiled, and optionally linked
file.cpp A C++ language source file to be preprocessed, compiled, and optionally linked
file.cxx
A C++ language source file to be preprocessed, compiled, and optionally linked
file.c++ A C++ language source file to be preprocessed, compiled, and optionally linked
2−26
file.ec
A C language source file containing embedded NonStop SQL/MP information or NonStop SQL/MX information to be preprocessed, compiled, and optionally linked
file.eC
A C++ language source file containing embedded NonStop SQL/MX information to be
preprocessed, compiled, and optionally linked
file.ecc
A C++ language source file containing embedded NonStop SQL/MX information to be
preprocessed, compiled, and optionally linked
Hewlett Packard Enterprise
527188-024
User Commands (c)
c89(1)
file.ecpp A C++ language source file containing embedded NonStop SQL/MX information to be
preprocessed, compiled, and optionally linked
file.ecxx A C++ language source file containing embedded NonStop SQL/MX information to be
preprocessed, compiled, and optionally linked
file.i
A preprocessed C source file to be compiled and optionally linked
file.ii
A preprocessed C++ source file to be compiled and optionally linked
file.m
A module definition file (MDF) containing NonStop SQL/MX information for a
corresponding C source file
file.o
An object file passed directly to a linker utility
file.so
A dynamic-link library (DLL) containing position-independent code (PIC) for use by
the eld, ld, or rld utility
file.sql
A C language source file containing embedded NonStop SQL/MX information to be
preprocessed, compiled, and optionally linked
file.srl
A shared run-time library passed directly to the nld utility
-l library A file to be searched by a linker utility to resolve current unresolved external references; ld or eld searches for files named liblibrary.so and liblibrary.a, nld searches for
files named liblibrary.srl and liblibrary.a
A library is searched when its name is encountered, so the placement of -l is
significant. See the Standard Libraries subsection for more details.
-WBdllsonly
Specifies that the linker utility uses dynamic linking when searching for dynamic-link
libraries specified in subsequent -l operands; placement of this operand is significant
(refer to the Dynamic and Static Linking subsection for details)
-WBdynamic
Specifies that the linker utility uses dynamic linking when searching for libraries
specified in subsequent -l operands; placement of this operand is significant (refer to
the Dynamic and Static Linking subsection for details)
-WBstatic
Specifies that the linker utility uses static linking when searching for libraries specified
in subsequent -l operands. Placement of this operand is significant. Refer to the
Dynamic and Static Linking subsection for details.
Input Files
An input file is one of the following:
527188-024
•
A text file containing a C language or C++ language source program
•
An object file in the format produced by the command c89 -c
•
A library of object files in the format produced by archiving zero or more object files
using the ar command
Hewlett Packard Enterprise
2−27
c89(1)
OSS Shell and Utilities Reference Manual
•
A linkfile or loadfile produced by the xld, eld, or ld utility
•
An executable file produced by the nld utility
•
A module definition file created by the NonStop SQL/MX preprocessor.
When the -Wsql flag is specified, C source files that contain embedded NonStop SQL/MP information can have names suffixed with .c or .ec. When the -Wsqlmx flag is specified, c89 uses the
source file filename extension to determine the language mode (C or C++) and the names of the
source files created by the NonStop SQL/MX preprocessor.
The name of a created source file is the name of the primary source file plus one of the following
extension transformations:
•
If the primary source file suffix is .ec or .sql and the -Wcpluplus flag is not specified, the
created source file has the suffix .c and uses the C language mode.
•
If the primary source file suffix is .ec or .sql and the -Wcplusplus flag is also specified,
the created source file has the suffix .cpp and uses the C++ language mode.
•
If the primary source file suffix is .eC, .ecpp, .ec++, .ecc, or .ecxx, the created source file
has the suffix .C, .cpp, .c++, .cc, or .cxx, resapectively, and uses the C++ language mode.
When c89 is passed a file name suffixed with .C, .cpp, .c++, .cc, or .cxx, that file is not passed to
the NonStop SQL/MX preprocessor. Such files are assumed to contain only C or C++ statements
without embedded NonStop SQL/MX information.
Output Files
An output file can be a preprocessed source file, an object file, or an executable file.
Standard Output File
The standard output file is empty unless a -E, -WM, or -WP flag is specified. If one of these
flags is specified, preprocessed source code is sent to the standard output file. When -WH is
used, the standard output file contains a line indicating which file is currently being operated
upon.
Standard Error File
The standard error file contains diagnostic and informational messages from c89 and the compilation components it calls. If more than one source file operand is specified, then for each such
file the format &quot;%s: \n&quot;,file is used to print the name of the source file before it is processed.
Standard Libraries
The c89 utility recognizes the following -l operands for standard libraries.
-l c
Contains all library functions provided by HPE NonStop that are specified in the XPG4
Version 2 (X/Open UNIX) specification, including those functions listed as residing in
the math.h header file.
-l C
Contains the correct C++ run-time libraries, based on the value of the -Wversionn flag.
If the -Wversionn flag is omitted, the default version C++ library is used.
When you specify the -Wcplusplus and -Wversionn flags, you need not specify -l C;
all needed libraries are automatically linked. For TNS/R programs, this includes the
cppinit[n].o and main function (_MAIN). When you specify the -Wversion2 flag,
cppinit.o is linked for a nonPIC program or cppinit2.o is linked for a PIC program.
When you specify the -Wversion3 flag, cppinit3.o is linked for a nonPIC program or
cppinit4.o is linked for a PIC program.
2−28
Hewlett Packard Enterprise
527188-024
User Commands (c)
c89(1)
-l l
Contains all functions required by the C language output of the lex utility that are not
made available through the -l c operand.
-l m
Contains all functions referenced in the math.h header file.
-l y
Contains all functions required by the C language output of the yacc utility that are not
made available through the -l c operand.
In the absence of flags that inhibit invocation of a linker utility, such as -c and -E, c89 directs the
linker to search the standard C library after all other object files and libraries are searched.
If a C++ source file operand or a -Wcpluscplus flag is specified, c89 directs the linker to search
the C++ run-time library before it searches the standard C library. If you want the libraries to be
searched in a specific order or linking options to be processed in a specified order, you should
start the appropriate linker (eld, ld, or nld) directly from the OSS shell and not use the c89 command to do the linking.
Libraries residing in the Guardian file system cannot be specified as -l operands because of the
naming convention. They can be specified in the desired order with the -Wxld, -Weld, -Wld, or
-Wnld flag.
Standard Include Directories
The standard include directory contains the standard C and C++ header files. c89 passes a -I flag
naming this directory as the last -I flag when processing source files. In the OSS environment,
the directory is /usr/include.
Standard Library Directories
The standard library directories contain the TNS/R native shared run-time libraries (SRLs) used
by the nld utility or the dynamic-link libraries (DLLs) used by the xld, eld, or ld utility to resolve
external references.
In the OSS environment, a linker first searches the directory that contains the current version of
the operating system image (the active /G/system/sysnn directory). The linker then searches the
/lib, /usr/lib, and /usr/local/lib directories.
The value of the COMP_ROOT environment variable is added to the beginning of /lib, /usr/lib,
and /user/local/lib. By default, the value of COMP_ROOT is null in the OSS environment.
See the xld(1), eld(1), or ld(1) reference page for more information about controlling the search
order for a PIC file linker.
Default Flags
If no flags are specified, c89 behaves as if the following flags were specified:
-Wsystype=oss -o a.out -Wenv=common -Wfieldalign=auto
-Wrefalign=8 -Woptimize=1 -Wansistreams -Winline
-WTandem_float (TNS/R-targeted compilations) or
-WIEEE_float (TNS/E- or TNS/X-targeted compilations)
-Wlist -Wnoinnerlist -Wsuppress -Wstdfiles -Wnomap
-Wnoextensions -Wnooverflow_traps -Wnoremarks
-Wnoinspect -Wnosaveabend -WBdynamic
-Wnon_shared (TNS/R-targeted compilations) or
-Wcall_shared (TNS/E- or TNS/X-targeted compilations)
-Wnoincludewhole -Wnoreexport -Wnooptionl_lib
-Wversion3
-Wwarn
-Wextern_data=no_gp (TNS/R-targeted compilations)
-D_XOPEN_SOURCE -I/usr/include -L/lib -L/usr/lib
-L/usr/local/lib -lc
527188-024
Hewlett Packard Enterprise
2−29
c89(1)
OSS Shell and Utilities Reference Manual
Environment Variables
The following environment variables affect the execution of c89.
AS1
Determines the pathname of the as1 assembler component of the C and C++ compilers.
/usr/lib/as1 is the default location for the OSS environment.
This environment variable is used for TNS/R-targeted compilations only.
CCOMBE
Determines the pathname of the ccombe component of the C and C++ compilers.
/usr/cmplr/ccombe is the default location for the OSS environment.
This environment variable is used for TNS/E-targeted compilations only.
CFE
Determines the pathname of the cfe language preprocessor component of the C and
C++ compilers. /usr/lib/cfe is the default location for the OSS environment.
This environment variable is used for TNS/R-targeted compilations only.
COMP_ROOT
Changes the default pathnames for:
•
The c89 compilation system components
•
The standard include directory
•
The standard library directories
In the OSS environment, the string specified in COMP_ROOT is added to the beginning of the default pathnames.
If a component’s environment variable is set explicitly, the COMP_ROOT environment variable does not modify that component’s environment variable.
ELD
Determines the pathname of the eld utility invoked by c89. /usr/bin/eld is the default
location for the OSS environment.
This environment variable is only used for TNS/E-targeted compilations.
LD
Determines the pathname of the ld utility invoked by c89. /usr/bin/ld is the default
location for the OSS environment.
This environment variable is only used for TNS/R-targeted compilations.
MXCMP
Determines the pathname of the NonStop SQL/MX release 1 compiler.
/G/system/system/mxcmp is the default.
MXCMPUM
Determines the pathname of the NonStop SQL/MX release 2 compiler.
/usr/tandem/sqlmx/bin/mxCompileUserModule is the default.
MXSQLC
Determines the pathname of the C/C++ NonStop SQL/MX preprocessor, mxsqlc.
/usr/tandem/sqlmx/bin/mxsqlc is the default.
NLD
Determines the pathname of the nld utility invoked by c89. /usr/bin/nld is the default
location for the OSS environment.
This environment variable is only used for TNS/R-targeted compilations.
2−30
Hewlett Packard Enterprise
527188-024
User Commands (c)
c89(1)
SQLCFE
Determines the pathname of the native C NonStop SQL/MP processor, sqlcfe.
/usr/lib/sqlcfe is the default location for the OSS environment.
This environment variable is used for TNS/R-targeted compilations only.
SQLCOMP
Determines the pathname of the native NonStop SQL/MP compiler, sqlcomp.
$SYSTEM.SYSTEM.SQLCOMP is the default location for the OSS environment.
The value of SQLCOMP must be a Guardian filename.
SQLMX_PREPROCESSOR_VERSION
Indicates the preprocessor rules and features to be used. Specifying the value 800
causes rules and features associated with release 1.8 to be used; the mxcmp compiler
is used and only MDF files and annotated source files are produced, while rules and
features associated with release 2.0 and later are ignored. Specifying a value of 1200
or larger or not specifying a value causes rules and features associated with release 2.0
and later to be used; the mxCompileUserModule compiler is used and annotated
source files that contain embedded module definitions are produced instead of MDF
files, while restrictions associated with release 1.8 or earlier are ignored.
TMPDIR
Determines the pathname that overrides the default directory for temporary files
created by c89 and the components it invokes. By default, temporary files are stored in
the /tmp directory. If TMPDIR is set to a directory that does not exist or is not writeable, c89 uses the default directory as described on the tempnam(3) reference page.
UGEN
Determines the pathname of the ugen assembler component of the C and C++ compilers. /usr/lib/ugen is the default location for the OSS environment.
This environment variable is used for TNS/R-targeted compilations only.
UOPT
Determines the pathname of the uopt optimizer component of the C and C++ compilers. /usr/lib/uopt is the default location for the OSS environment.
This environment variable is used for TNS/R-targeted compilations only.
Use the COMP_ROOT environment variable instead of specifying each compilation system
component’s environment variable, if possible.
EXAMPLES
1.
The command
c89 test1.c
compiles the source file test1.c and links the object file into an executable file a.out in
the current working directory.
2.
The command
c89 -Wnowarn -Wwarn=262 test1.c
compiles the source file test1.c and links the object file into an executable file a.out in
the current working directory. All compiler warning messages except message number
262 are disabled.
527188-024
Hewlett Packard Enterprise
2−31
c89(1)
OSS Shell and Utilities Reference Manual
3.
The command
c89 -c /home/me/app/test1.c
compiles the source file /home/me/app/test1.c into the object file test1.o in the current
working directory.
4.
The command
c89 -g -o test2 x.c y.c z.c
-Wnostdinc
-I/dev/product/app/src
-I/new/usr/include
-lclient -lserver
-L/dev/product/lib
-L/new/usr/lib
compiles the source files x.c, y.c, and z.c and links their respective object files x.o, y.o,
and z.o into the executable file test2. Symbolic information is generated by the compiler
and retained by the linker utility for debugging.
Included files are searched for in the directories /dev/product/app/src and
/new/usr/include; /usr/include is not searched. nld searches for the libraries
libclient.srl and libserver.srl in the directories /dev/product/lib and /new/usr/lib before
searching in the directories /G/system/sysnn, /lib, /usr/lib, and /usr/local/lib.
5.
The command
c89 -g -o test2 x.c y.c z.c
-Wcall_shared
-Wnostdinc
-I/dev/product/app/src
-I/new/usr/include
-lclient -lserver
-L/dev/product/lib
-L/new/usr/lib
compiles the source files x.c, y.c, and z.c and links their respective object files x.o, y.o,
and z.o into the loadfile test2. Symbolic information is generated by the compiler and
retained by the linker utility for debugging.
Included files are searched for in the directories /dev/product/app/src and
/new/usr/include; /usr/include is not searched. ld searches for the libraries libclient.so
and libserver.so in the directories /dev/product/lib and /new/usr/lib before searching in
the directories /G/system/sysnn, /lib, /usr/lib, and /usr/local/lib.
6.
The command
c89 -o test3 -O -DTYPE=3
-I/usr/friend
-I/usr/myself/headers
foo.c bar.o baz.c
compiles the source files foo.c and baz.c and links their respective object files with bar.o
into the object file test3.o. The preprocessor symbol TYPE is defined to 3, and full
optimization is performed by the compiler. The compiler looks for included files in the
directory /usr/friend, then in /usr/myself/headers, then in /usr/include.
2−32
Hewlett Packard Enterprise
527188-024
User Commands (c)
7.
c89(1)
The command
c89 -Wsql=release2,sqlmap -c file.c
compiles file.c with NonStop SQL/MP support enabled. The listing includes an SQL
map. The NonStop SQL/MP processor is run, expecting NonStop SQL/MP release 2
features. The NonStop SQL/MP compiler is not run. A -Wsqlcomp flag would run the
NonStop SQL/MP compiler. Note that there is no white space after the comma in the
-Wsql flag.
8.
The command
c89 -Wsqlmx -Wmxcmp -o sqlprog.exe sqlprog.ec
causes the following steps to be performed:
9.
a.
c89 invokes the NonStop SQL/MX preprocessor, mxsqlc. mxsqlc takes the file
sqlprog.ec (consisting of a single C module with embedded NonStop SQL/MX
information) as input and produces two files: sqlprog.c and sqlprog.m.
sqlprog.c is the C-only equivalent of sqlprog.ec; that is, NonStop SQL/MX
statements are translated to the appropriate C code. sqlprog.m is the
corresponding MDF.
b.
If there are no errors in Step a, c89 invokes the C compiler to compile sqlprog.c,
creating the object file sqlprog.o.
c.
If there are no errors in Step b, c89 invokes the NonStop SQL/MX compiler to
process the MDF file sqlprog.m.
d.
If there are no errors in Step c, c89 invokes nld to link sqlprog.o with the C standard library and produce the executable file sqlprog.exe.
The command
c89 -c -Wsqlmx file1.eC file2.ecc file3.ec++
uses the mxsqlc preprocessor on several C++ source files and also compiles them, but
does not link the results. If no errors are detected in either the preprocessing or compilation steps, the following files are created: file1.m, file1.C, file2.m, file2.cc, file3.m,
file3.c++, file1.o, file2.o, file3.o.
10. The command
c89 -Wsqlmx -E file.ec &gt; file-cpp.c
uses the mxsqlc preprocessor to expand embedded SQL statements and invokes the NonStop SQL/MX preprocessor to create a single source file containing only C statements.
11. The command
c89 -c -Wsqlmx file1.C file2.ecc file3.ec++ file4.cpp
illustrates mixing C++ source files, with and without NonStop SQL/MX information, on
a single command line. Only source files that have names with one of the SQL extension
suffixes invoke the mxsqlc preprocessor. However, all files are compiled but not linked.
If no errors are detected in either the preprocessing or compilation steps, the following
files are created: file2.m, file2.cc, file3.m, file3.c++, file1.o, file2.o, file3.o, file4.o.
527188-024
Hewlett Packard Enterprise
2−33
c89(1)
OSS Shell and Utilities Reference Manual
12. The command
c89 -Wmxcmp -Wmxcmp_files=test1.m,test1.o
SQL-compiles the MDF file test1.m using the NonStop SQL/MX mxcmp compiler and
processes the file test1.o using the NonStop SQL/MX mxCompileUserModule without
also linking it.
13. The following command on a TNS/R system
c89 -Wsrl -Wnld=-ul -o mylib mylib.c
compiles the source file mylib.c and links the object file to create a native user library, a
special shared run-time (SRL) library. The file is named mylib in the current working
directory.
14. The command
c89 file.c -lc -WBstatic -l archive -WBdynamic -l native
compiles the source file file.c and links the object file into an executable file a.out in the
current working directory. The linker performs dynamic linking by searching first for the
file libc.srl and then libc.a. The linker then performs static linking by searching for the
file libarchive.a. The linker then performs dynamic linking by searching first for the file
libnative.srl and then libnative.a.
15. The command
c89 file.c -lc -Wcall_shared -WBstatic
-l archive -WBdynamic
-l native
compiles the source file file.c and links the object file into loadfile a.out in the current
working directory. eld or ld performs dynamic linking by searching first for the file
libc.so and then libc.a. The linker then performs static linking by searching for the file
libarchive.a. The linker then performs dynamic linking by searching first for the file
libnative.so and then libnative.a.
16. The command
c89 -Wsqlcomp -c exefile
invokes the NonStop SQL/MP compiler to process the already linked file exefile.
17. The command
c89 -Wmxcmp -c module.m
invokes the NonStop SQL/MX compiler to process the module definition file module.m.
FILES
/usr/bin/c89
Native c89 in the OSS environment.
/G/system/sysnn/wcppcdll
C++ run-time library function object code for 64-bit L-series processes; linked
automatically when you compile and link C++ surce files or when you specify the
-Wcplusplus flag.
2−34
Hewlett Packard Enterprise
527188-024
User Commands (c)
c89(1)
/G/system/sysnn/xcppcdll
C++ run-time library function object code for 32-bit L-series processes; linked
automatically when you compile and link C++ surce files or when you specify the
-Wcplusplus flag.
/G/system/sysnn/ycppcdll
C++ run-time library function object code for 64-bit J-series and H-series processes;
linked automatically when you compile and link C++ surce files or when you specify
the -Wcplusplus flag.
/G/system/sysnn/zcppcdll
C++ run-time library function object code for 32-bit J-series and H-series processes;
linked automatically when you compile and link C++ surce files or when you specify
the -Wcplusplus flag.
/G/system/sysnn/wcpp2dll
C++ run-time library function object code for 64-bit L-series processes; linked
automatically when you compile and link C++ surce files or when you specify the
-Wcplusplus flag.
/G/system/sysnn/xcpp2dll
C++ run-time library function object code for 32-bit L-series processes; linked
automatically when you compile and link C++ surce files or when you specify the
-Wcplusplus flag.
/G/system/sysnn/ycpp2dll
C++ run-time library function object code for 64-bit J-series or H-series processes;
linked automatically when you compile and link C++ surce files or when you specify
the -Wcplusplus flag.
/G/system/sysnn/zcpp2dll
C++ run-time library function object code for 32-bit J-series or H-series processes;
linked automatically when you compile and link C++ surce files or when you specify
the -Wcplusplus flag.
/G/system/sysnn/wcpp3dll
C++ run-time library function object code for 64-bit L-series processes; linked
automatically when you compile and link C++ surce files or when you specify the
-Wcplusplus flag.
/G/system/sysnn/xcpp3dll
C++ run-time library function object code for 32-bit L-series processes; linked
automatically when you compile and link C++ surce files or when you specify the
-Wcplusplus flag.
/G/system/sysnn/ycpp3dll
C++ run-time library function object code for 64-bit J-series and H-series processes;
linked automatically when you compile and link C++ surce files or when you specify
the -Wcplusplus flag.
/G/system/sysnn/zcpp3dll
C++ run-time library function object code for 32-bit J-series and H-series processes;
linked automatically when you compile and link C++ surce files or when you specify
the -Wcplusplus flag.
527188-024
Hewlett Packard Enterprise
2−35
c89(1)
OSS Shell and Utilities Reference Manual
/G/system/sysnn/zcresrl
Common Run-Time Environment (CRE) function object code for G-series processes;
linked automatically.
/G/system/sysnn/wcredll
Common Run-Time Environment (CRE) function object code for 64-bit L-series
processes; linked automatically.
/G/system/sysnn/xcredll
Common Run-Time Environment (CRE) function object code for 32-bit L-series
processes; linked automatically.
/G/system/sysnn/ycredll
Common Run-Time Environment (CRE) function object code for 64-bit J-series and
H-series processes; linked automatically.
/G/system/sysnn/zcredll
Common Run-Time Environment (CRE) function object code for 32-bit H-series
processes; linked automatically.
/G/system/sysnn/zcrtlsrl
C run-time library function object code for G-series processes; linked automatically.
/G/system/sysnn/wcrtldll
C run-time library function object code for 64-bit L-series processes; linked automatically.
/G/system/sysnn/xcrtldll
C run-time library function object code for 32-bit L-series processes; linked automatically.
/G/system/sysnn/ycrtldll
C run-time library function object code for 64-bit J-series and H-series processes;
linked automatically.
/G/system/sysnn/zcrtldll
C run-time library function object code for 32-bit H-series processes; linked automatically.
/G/system/sysnn/zicnvsrl
Function object code for G-series processes; linked automatically.
/G/system/sysnn/wicnvdll
Function object code for 64-bit L-series processes; linked automatically.
/G/system/sysnn/xicnvdll
Function object code for 32-bit L-series processes; linked automatically.
/G/system/sysnn/yicnvdll
Function object code for 64-bit J-series and H-series processes; linked automatically.
/G/system/sysnn/zicnvdll
Function object code for 32-bit H-series processes; linked automatically.
/G/system/sysnn/zi18nsrl
Internationalization function object code for G-series processes; linked automatically.
2−36
Hewlett Packard Enterprise
527188-024
User Commands (c)
c89(1)
/G/system/sysnn/wi18ndll
Internationalization function object code for 64-bit L-series processes; linked automatically.
/G/system/sysnn/xi18ndll
Internationalization function object code for 32-bit L-series processes; linked automatically.
/G/system/sysnn/yi18ndll
Internationalization function object code for 64-bit J-series and H-series processes;
linked automatically.
/G/system/sysnn/zi18ndll
Internationalization function object code for 32-bit H-series processes; linked automatically.
/G/system/sysnn/zosscsrl
Function object code for G-series processes; linked automatically.
/G/system/sysnn/wosscdll
Function object code for 64-bit L-series processes; linked automatically.
/G/system/sysnn/xosscdll
Function object code for 32-bit L-series processes; linked automatically.
/G/system/sysnn/yosscdll
Function object code for 64-bit J-series and H-series processes; linked automatically.
/G/system/sysnn/zosscdll
Function object code for 32-bit H-series processes; linked automatically.
/G/system/sysnn/zossesrl
Function object code for G-series processes; linked automatically.
/G/system/sysnn/wossedll
Function object code for 64-bit L-series processes; linked automatically.
/G/system/sysnn/xossedll
Function object code for 32-bit L-series processes; linked automatically.
/G/system/sysnn/yossedll
Function object code for 64-bit J-series and H-series processes; linked automatically.
/G/system/sysnn/zossedll
Function object code for 32-bit H-series processes; linked automatically.
/G/system/sysnn/zossfsrl
Function object code for G-series processes; linked automatically.
/G/system/sysnn/wossfdll
Function object code for 64-bit L-series processes; linked automatically.
/G/system/sysnn/xossfdll
Function object code for 32-bit L-series processes; linked automatically.
527188-024
Hewlett Packard Enterprise
2−37
c89(1)
OSS Shell and Utilities Reference Manual
/G/system/sysnn/yossfdll
Function object code for 64-bit J-series and H-series processes; linked automatically.
/G/system/sysnn/zossfdll
Function object code for 32-bit H-series processes; linked automatically.
/G/system/sysnn/zossksrl
Function object code for G-series processes; linked automatically.
/G/system/sysnn/wosskdll
Function object code for 64-bit L-series processes; linked automatically.
/G/system/sysnn/xosskdll
Function object code for 32-bit L-series processes; linked automatically.
/G/system/sysnn/yosskdll
Function object code for 64-bit J-series and H-series processes; linked automatically.
/G/system/sysnn/zosskdll
Function object code for 32-bit H-series processes; linked automatically.
/G/system/sysnn/xpgodll
Symbols referenced by instrumented code for L-series processes; must be linked when
you link a program or DLL that contains instrumented code; linked automatically when
you specify the -Wcodecov or -Wprofgen flags.
/G/system/sysnn/zpgodll
Symbols referenced by instrumented code for J-series and H-series processes; must be
linked when you link a program or DLL that contains instrumented code; linked
automatically when you specify the -Wcodecov or -Wprofgen flags.
/G/system/sysnn/zsecsrl
Security function object code for G-series processes; linked automatically.
/G/system/sysnn/wsecdll
Security function object code for 64-bit L-series processes; linked automatically.
/G/system/sysnn/xsecdll
Security function object code for 32-bit L-series processes; linked automatically.
/G/system/sysnn/ysecdll
Security function object code for 64-bit J-series and H-series processes; linked
automatically.
/G/system/sysnn/zsecdll
Security function object code for 32-bit H-series processes; linked automatically.
/G/system/sysnn/zstfnsrl
Function object code for G-series processes; linked automatically.
DIAGNOSTICS
If c89 encounters a compilation error that prevents an object file from being created, it writes a
diagnostic message to the standard error file and continues to compile other source code
operands. However, it does not perform program linking and returns a nonzero exit status.
If the linking is unsuccessful, c89 writes a diagnostic message to the standard error file and
returns a nonzero exit status.
2−38
Hewlett Packard Enterprise
527188-024
User Commands (c)
c89(1)
EXIT VALUES
The following exit values are returned:
0 (zero)
Successful completion.
&gt;0
An error occurred.
RELATED INFORMATION
Commands: ar(1), c99(1), eld(1), ld(1), nld(1), strip(1).
Functions: fp_class(3), tempnam(3).
Files: float(4).
STANDARDS CONFORMANCE
All -W options are HPE NonStop extensions to the POSIX and XOPEN standards.
527188-024
Hewlett Packard Enterprise
2−39
c99(1)
OSS Shell and Utilities Reference Manual
NAME
c99 - Compiles C99-compliant C and C++ programs using the TNS/X and TNS/E native compilers
SYNOPSIS
c99
[-c | -Wnolink ]
[ [ -D name[=&quot;value&quot; ] ] ... ] [ -E ] [ -g ]
[-I directory ... ]
[-L directory ... ] [ -o outfile ] [ -Ooptlevel ] [ -s ]
[-U name ]
[-Wallow_extern_explicit_instantiation ]
[-Wansistreams ]
[-Wbasename ]
[-WBdllsonly | -WBdynamic | -WBstatic ]
[-Wbitfield_container=value ]
[-Wbuild_neutral_library ]
[-WC ]
[-Wcall_shared | -Wshared ]
[-Wcodecov ]
[-Wcolumns=c ]
[-Wcplusplus ]
[-WDname[=&quot;value&quot; ] ]
[-Wdryrun ]
[-Weld=args ]
[-Weld_obey=file ]
[-Wenv=env ]
[-Werrors=e ]
[-W[no]extensions ]
[-Wfieldalign=align ]
[-Wforce_static_typeinfo ]
[-Wforce_static_vtbl ]
[-Wforce_vtbl | -Wsuppress_vtbl ]
[-Wglobalized ]
[-WH ]
[-Wheap=n[b | w | p ]
[-Whelp | -Wusage ]
[-Whighpin={on | off} ]
[-Whighrequesters={on | off} ]
[-WIEEE_float | -WTandem_float ]
[-Wilp32 | -Wlp64 ]
[-W[no]include_whole ]
[-W[no]inline ]
[-Winline_compiler_generated_functions ]
[-Winline_string_literals ]
[-W[no]innerlist ]
[-W[no]inspect ]
[-Wlines=l ]
[-W[no]list ]
[-WM ]
[-W[no]map ]
[-Wmigration_check=32to64 ]
[-WmoduleCatalog=&quot;catalog_spec&quot; ]
[-WmoduleGroup[=&quot;[group_spec&quot; ] ] ]
2−40
Hewlett Packard Enterprise
527188-024
User Commands (c)
c99(1)
[-WmoduleSchema=&quot;schema_spec&quot; ]
[-WmoduleTableSet[=&quot;[tableset_spec&quot; ] ] ]
[-WmoduleVersion[=&quot;[version_spec&quot; ] ] ]
[-Wmultibyte_char ]
[-Wmxcmp[=&quot;args&quot; ] ]
[-Wmxcmp_add=&quot;args&quot; ]
[-Wmxcmp_files=&quot;file&quot;[,...] ]
[-Wmxcmp_querydefault=&quot;attr_name=attr_value&quot;[,...] ]
[-Wnoexceptions ]
[-Wnomain ]
[-Wnostdinc ]
[-Wnostdlib ]
[-Woptfile=&quot;filename&quot; ]
[-W[no]optional_lib ]
[-W[no]overflow_traps ]
[-WP ]
[-Wpool_string_literals ]
[-Wprofdir=name ]
[-Wprofgen ]
[-Wprofuse[=filename] ]
[-Wr ]
[-W[no]reexport ]
[-Wrefalign=ref ]
[-WRefMemFuncsOnly ]
[-W[no]remarks ]
[-Wrunnamed ]
[-WRVU={h-series-rvu | l-series-rvu} ]
[-W[no]saveabend ]
[-Wsavetemps ]
[-Wsqlmx[=&quot;args&quot; ] ]
[-Wsqlmxadd[=&quot;args&quot; ] ]
[-W[no]stdfiles ]
[-W[no]suppress ]
[-Wsyntax ]
[-Wsystype={guardian | oss} ]
[-Wtarget=platform ]
[-Wtimestamp=value ]
[-Wu=&quot;symbol_name&quot; ]
[-Wv ]
[-Wverbose ]
[-Wversion3 ]
[-Ww ]
[-W[no]warn[=w [,w] ... ] ]
[-Wx ]
[-Wxld=args ]
[-Wxld_obey=file ]
operand . . .
FLAGS
-c | -Wnolink
Compiles the specified C or C++ source files but suppresses linking, even if another
flag specifies linking.
You cannot specify the -c flag if you use the -Wshared flag.
527188-024
Hewlett Packard Enterprise
2−41
c99(1)
OSS Shell and Utilities Reference Manual
-D name[=&quot;value&quot; ]
Defines the preprocessor symbol name as value. It is equivalent to a #define directive
in the source. If no value is given, name is defined as 1. The -D flag has lower precedence than the -U flag. Thus, if name is specified in both a -U and a -D flag, name is
undefined regardless of the order of the flags.
Use this flag to define compiler feature-test macros.
When the NonStop SQL/MX preprocessor is invoked, all -D specifications are
automatically passed to the preprocessor as the preprocessor’s -d options.
-E
Preprocesses the specified source files. No compilation or linking is performed. Output is sent to the standard output file and contains #line directives.
If the -Wsqlmx flag is specified, embedded NonStop SQL/MX statements are processed.
The -WH and -WM flags override the -E flag.
-g
Produces in the object or executable files information (symbol tables) used for symbolic debugging.
-I directory
Adds directory to the list of directories searched to locate #include files with relative
pathnames. (Relative pathnames do not begin with a slash, ’/’). #include filenames
enclosed in double quotes are searched for first in the directory of the file with the
#include directive, then in directories named with -I flags, and last in the standard
include directories. #include filenames enclosed in angle brackets (&lt;&gt;) are searched
for first in directories named with -I flags and then in the standard include directories.
Refer to the Standard Include Directories subsection for details.
-L directory
Adds directory to the list of directories searched to locate libraries specified by
operands of the form -l library. See the Operands subsection for details.
-o outfile Uses the pathname outfile instead of the default pathname a.out for the name of the
output object file.
If only one source file is specified and the -c flag is specified, the generated output is
placed into outfile. Only one -o flag can be specified. The file specified cannot be an
SQL preprocessing output file.
If a single source file is compiled and linked in one invocation of c99, and if the outfile
is the same name as that of the input object file, c99 issues a warning message and
places the output in a temporary file.
-Ooptlevel
Sets the compiler to the optimization level specified by optlevel, where optlevel is 0
(zero), 1, or 2. If this flag is not set, the application is compiled at optimization level 1.
If -O is specified without a value for optlevel, the application is compiled at optimization level 2. This option is equivalent to the c89 -Woptimize=n option.
-s
2−42
Strips symbolic information not required for proper execution from object and executable files. The resulting object file cannot be debugged using a symbolic debugger.
This flag is ignored if the -Wr flag is also specified.
Hewlett Packard Enterprise
527188-024
User Commands (c)
c99(1)
-U name Removes any initial definition of the preprocessor symbol name. The -U flag has
higher precedence than the -D flag. If name is specified in both a -U and a -D flag,
name is undefined regardless of the order of the flags.
-Wallow_extern_explicit_instantiation
Allows an extern storage attribute to be applied to an explicit template instantiation.
This flag suppresses the instantiation of the template. If this flag is omitted, the template is instantiated.
-Wansistreams
Generates a Guardian program that opens text files as type 180 instead of type 101 if
-Wsystype=guardian is specified. (By default Guardian programs open text files as
type 101.) This flag is ignored when -Wsystype=oss is used. OSS programs can open
text files only as type 180.
-Wbasename
Directs the compiler to place only the last part of the source file name, known as the
basename, into the dynamic information (DYN) file when the instrumented process
runs.
If you use the -Wbasename option and the -Wprofgen option to compile a source file,
you also must use the -Wbasename option when you use the -Wprofuse option to
compile this source file. When you use the -Wbasename option, the source file is not
required to be in the same location as it was when you compiled the file using the
-Wprofgen option, but the basename must be the same.
If you did not use both the -Wbasename and the -Wprofgen options when you compiled this source file, do not specify the -Wbasename flag when you compile this
source file with the -Wprofuse flag. If you do not use the -Wbasename flag, when you
compile the source file and specify the -Wprofuse flag, the source file must be in the
same location as it was when you used the -Wprofgen flag to compile the file.
For more information about profile-guided optimization and the rules for using the
-Wbasename flag, see the Code Profiling Utilities Manual.
-WBdllsonly
Tells the xld or eld linker to limit searches to position-independent code (PIC) files that
are dynamic-link libraries (DLLs) when resolving the file names specified for the -l
operands and -L flags.
If a file name is qualified, the linker searches for a DLL with that name.
If a filename is unqualified, in each search path, the linker first searches for a DLL with
the file name as specified in the -l operand or -L flag. If the linker cannot find a DLL,
the file name is unqualified, and the search path is not in the Guardian file system (/G),
then the linker prefixes lib and suffixes .so to the file name and searches again. If the
linker still cannot find the DLL, it searches the path again with the same prefix but with
.srl as the suffix. For more information on search paths, see the Finding Libraries
subsection of the xld(1) or eld(1) reference page under DESCRIPTION.
When a DLL cannot be found, the linker issues an error message unless its
-allow_missing_libs flag is specified.
The -WBdllsonly, -WBdynamic, and -WBstatic flags are search control toggles.
Multiple flags can be specified in a single linker invocation; the behavior specified
remains in effect until another flag in the set is specified. Thus, you can search for both
DLLs and archive files for some -l operands and -L flags and search for just archive
files for others. The default library search control is -WBdynamic.
527188-024
Hewlett Packard Enterprise
2−43
c99(1)
OSS Shell and Utilities Reference Manual
-WBdynamic
Specifies that the linker utility uses dynamic linking when searching for libraries
specified in subsequent operands of the form -l library. Dynamic linking is in effect
until a -WBstatic flag is specified. -WBdynamic is the default setting. Refer to the
Dynamic and Static Linking subsection for details.
-WBstatic
Specifies that the linker utility uses static linking when searching for libraries specified
in subsequent operands of the form -l library. Static linking is in effect until a
-WBdynamic flag is specified. -WBdynamic, not -WBstatic, is the default setting.
Refer to the Dynamic and Static Linking subsection for details.
-Wbitfield_container=value
Directs the compiler to accept larger and more flexible bit fields where value is one of
the following:
int
Directs the compiler to pack bit fields into 32-bit ints. In this mode,
the compiler will not accept bit fields larger than 32 bits. The compiler
returns an error for any bit field declared to be of type long long
(unless the -Wextensions flag is also specified). The compiler returns
warnings for other non-standard integer types.
long
Directs the compiler to pack bit fields whose base type is larger than
32-bits into 64-bit ints. All other bit fields will be packed into 32-bit
ints. In this mode, the compiler accepts the long long and long bitfield types and up to 64 bits in length. The compiler returns warnings
for other non-standard integer types.
all
Directs the compiler to pack all bit fields into ints defined by their base
type. The compiler will accept any integer type for a bit field. This
mode provides additional compatibility with the various methods other
compilers may use to pack bit fields.
The default value is int except when the -Wlp64 flag is specified, in which case the
default becomes long.
Note: The above rules apply to bit fields declared in auto or platform (the
default) structs. Any bit field declared in a shared2 struct will continue
to follow shared2 rules. Bit fields in shared2 structs can never be larger
than 32-bits. Bit fields declared in shared8 structs can be larger than
32-bits (if the value is long or long), but the compiler will emit a warning. Bit fields in shared8 structs will be packed as before except that bit
fields larger than 32-bits will be packed into 64-bit containers.
This flag is supported on systems running L15.02 or later L-series RVUs,
J06.13 or later J-series RVUs, or H06.24 or later H-series RVUs only.
-Wbuild_neutral_library
Specifies that the compiler should issue an error message when it encounters any
exported or imported interface in a DLL that depends on types marked as being incompatible with the neutral C++ dialect.
-WC
2−44
Retains comments when preprocessing files. Comments are removed from preprocessor output by default.
Hewlett Packard Enterprise
527188-024
User Commands (c)
c99(1)
-Wcall_shared | -Wshared
Directs the compiler to create a specific type of object file:
-Wcall_shared Specifies that the object file should be a PIC file; the eld or xld linker
is invoked. If the -c flag is also specified, the file is a linkfile. Otherwise, the file is an executable object file (loadfile).
This is the default behavior.
-Wshared
Specifies that the file should be a PIC DLL; the xld or eld linker is
invoked. You cannot use this flag if you use the -c flag.
-Wcodecov
Directs the compiler to create an instrumented object file and to create or add to an
existing SPI file (TNS/E only). This flag has an effect only if you also specify either the
-Wtarget=ipf flag or the -Wtarget=tns/e flag, or either the -Wtarget=x86 flag or the
-Wtarget=tns/x flag.
The first time the -Wcodecov flag is used to compile a program on TNS/E systems, the
compiler creates a Static Profiling Information (SPI) file. This file is one of the input
files for the Code Coverage tool. If the program is compiled in an OSS directory:
•
The default name for the SPI file is pgopti.spi.
•
If the default file is not write-accessible, the name of the SPI file created is
tpopti.spi.
•
A lock file called pgopti.spl. When compilation is complete, the compiler
deletes this file.
If the program is compiled in a Guardian directory:
•
The default name for the SPI file is pgospi.
•
If the default file is not write-accessible, the name of the SPI file created is
tpgospi.
•
A lock file called pgospl. When compilation is complete, the compiler deletes
this file.
If the SPI file already exists when the program is compiled with the -Wcodecov flag,
the compiler updates or adds information to the existing SPI file. If more than one SPI
file exists for the same program, you must concatenate the files manually before you
can use the resulting file as input to the Code Coverage Tool.
In TNS/X, the SPI file is not created and is not used by the TNS/X Code Coverage
Tool.
For more information about the Code Coverage Tool, see the Code Profiling Utilities
Manual.
-Wcolumns=c
Specifies the maximum number of columns in input source files to process. c is in the
range 20 through 32767. Text in columns beyond column c is ignored.
527188-024
Hewlett Packard Enterprise
2−45
c99(1)
OSS Shell and Utilities Reference Manual
-Wcplusplus
Directs c99 to assume that files with a .c or .i suffix contain C++ source code, and
defines the feature-test macro _ _cplusplus. If linking occurs, this flag directs the
linker utility to search the C++ standard run-time library.
If this flag is omitted and none of the operand filenames end in .C, .cpp, .cc, or .cxx,
then source files are compiled as C files only and, if -c is not specified, are only linked
with the C standard library. See Standard Libraries for details.
-WDname[=&quot;value&quot; ]
Specifies a macro that is defined only during the NonStop SQL/MX preprocessing step.
See the HPE NonStop SQL/MX Programming Manual for C and COBOL for details
about its -d flag=[value] option. This flag can be specified more than once.
Note that all -D values that are supplied to c99 are automatically passed as -d options
to the NonStop SQL/MX preprocessor.
This flag is ignored unless the -Wsqlmx flag is also specified.
-Wdryrun
Verifies the syntax and semantics of flags and operands specified to c99 and enables the
-Wv flag. No compilation system components are run.
-Weld=&quot;args&quot;
Passes the arguments specified in args to the eld utility after any other arguments are
passed.
Use this flag to pass arguments to eld when creating a PIC file. c99 does not check the
validity of eld arguments.
You can only use this flag when you use one of the following flags:
-Wcall_shared or -Wshared
This flag is ignored when the command does not initiate linking.
-Weld_obey=&quot;file&quot;
Directs the eld utility to read additional command-line arguments from the command
file specified in the file argument. The arguments are processed as if they had been
passed directly to eld in place of file. c99 does not verify the existence or readability
of file.
You can only use this flag if you use one of the following flags:
-Wcall_shared or -Wshared
This flag is ignored when the command does not initiate linking.
-Wenv=env
Specifies the run-time environment. env can be one of common, embedded, library,
or libspace. The default value is common.
-Werrors=e
Stops compiling when e errors have been encountered.
-W[no]extensions
Enables [disables] HPE NonStop extensions. If -Wextensions is specified, c99 also
defines the _TANDEM_SOURCE feature-test macro. The default value is -Wnoextensions.
2−46
Hewlett Packard Enterprise
527188-024
User Commands (c)
c99(1)
-Wfieldalign=align
Specifies the field alignment for structures. align can be one of auto, cshared2,
shared2, shared8, or platform. The default value is auto. You cannot specify a
struct tag with this flag.
-Wforce_static_typeinfo
Specifies that the typeinfo variables are to be static in the object file. This flag applies
only to variables that are not part of an exported or imported class.
-Wforce_static_vtbl
Specifies that the virtual function tables that are created by the compiler are to be static
in the object file and are not exported. This flag applies only to variables that are not
part of an exported or imported class.
The -Wforce_static_vtbl flag is valid only for TNS/R-targeted C++ compilations.
-Wforce_vtbl | -Wsuppress_vtbl
Controls whether virtual function tables are created in cases where the compiler cannot
determine the need for the tables.
The virtual function table for a class is defined in a compilation if the compilation contains a definition of the first noninline, nonpure virtual function of the class. For
classes that contain no such function, the default behavior is to define the virtual function table (but to define it as a local static entity).
The flag -Wsuppress_vtbl suppresses the definition of the virtual function tables for
such classes, and the flag -Wforce_vtbl forces the definition of the virtual function
table for such classes. The -Wsuppress_vtbl flag is valid only for C++ compilations.
The -Wforce_vtbl flag forces definition of virtual function tables in cases where the
heuristic used by the compiler to decide on definition of virtual function tables provides no guidance. The -Wforce_vtbl flag differs from the default behavior in that it
does not force the definition to be local. The -Wforce_vtbl flag is valid only for C++
compilations.
-Wglobalized
Specifies that the code generated by the compiler is preemptable. By default, compilers generate code that is not preemptable. Preemptable code allows named references in a DLL to resolve to externally-defined code and data items instead of to
resolve to its own internally-defined code and data items. Preemptable code is less
efficient than code that is not preemptable, and is only needed in a few instances when
creating a DLL.
-WH
Preprocesses the specified source files and prints the names of header files, as opened,
to the standard error file. No compilation or linking is performed. Unlike the -WP
flag, no preprocessed files with .i (for C) or .ii (for C++) suffixes are produced.
The -WH flag overrides the -E and -WP flags.
-Wheap=n[b | w | p ]
Specifies the value that the linker should use for the HEAP_MAX attribute of the output file. n can be any positive value that gives a size valid for the NonStop server node
on which the file is used.
527188-024
Hewlett Packard Enterprise
2−47
c99(1)
OSS Shell and Utilities Reference Manual
The size can be specified in units of:
b
Bytes; this is the default unit
w
Words
p
Pages
-Whelp | -Wusage
Displays help information on how to run c99. No compilation system components are
run.
-Whighpin={on | off }
Directs the linker utility to set the HIGHPIN attribute to on or off in the output object
files. This attribute specifies whether the object file will run at a high PIN or a low
PIN. If -Wsystype=guardian is used, the default setting is -Whighpin=off. If
-Wsystype=oss is used, the default setting is -Whighpin=on. This flag is set only if an
executable object file is produced.
-Whighrequesters={on | off }
Directs the linker utility to set the HIGHREQUESTERS attribute to on or off in the
output object file. This attribute specifies whether the object file supports requests
from requesters running at a high PIN. The object file must contain the main( ) function. If -Wsystype=guardian is used, the default setting is -Whighrequesters=off. If
-Wsystype=oss is used, the default setting is -Whighrequesters=on. This flag is set
only if an executable object file is produced.
-WIEEE_float | -WTandem_float
Specifies the floating-point format to be used by the compiler for values of type float or
type double. The differences between the two formats are summarized in the float(4)
reference page.
IEEE floating-point values can include NaN and infinity, and the sign of 0.0 (zero) can
be either positive or negative. Refer to the fp_class(3) reference page for a description
of IEEE value classes.
Guardian functions are available to convert between floating-point formats. For a discussion of floating-point conversions, see to the Guardian Programmer’s Guide.
On systems with processors that support IEEE Std 754-1985 floating-point format data,
the compiler uses that format when -WIEEE_float is specified. Specifying
-WTandem_float selects Hewlett Packard Enterprise’s proprietary Tandem floatingpoint format.
On systems without processors that support IEEE Std 754-1985 floating-point format
data, the -WIEEE_float flag is not available. Use of the -WIEEE_float flag on such
systems produces an error diagnostic.
The default setting is -WIEEE_float.
-Wilp32 | -Wlp64
Specifies the data model to be used: 32-bit (ilp32) or 64-bit (lp64). The default data
model is ilp32. The following c89 option is not allowed with -Wlp64:
-Wsystype=guardian. For more information about data models, see the C/C++
Programmer’s Guide.
2−48
Hewlett Packard Enterprise
527188-024
User Commands (c)
c99(1)
-W[no]include_whole
Tells the linker whether to include in the loadfile all linkable archive members of all
archive libraries encountered after this flag is specified.
Specifying -Winclude_whole begins this linking action. When -Wnoinclude_whole
behavior is in effect, archive searches are controlled by the existence of undefined
symbols. Archives are searched in the order specified on the command line. Symbols
are marked as undefined by compilers or by the user through the -Wu flag. When an
archive member is found that resolves an undefined symbol, the member&acute;s symbols are
merged into the external symbol table for the loadfile being created. After the merge,
the undefined symbol that triggered the merge is resolved (marked as defined). The
same merge might resolve other undefined symbols or result in more undefined symbols.
You can stop the linking action of -Winclude_whole by specifying the
-Wnoinclude_whole flag later in the command line or an obey file.
These flags can be specified as many times as needed in the command stream. Providing either flag overrides the current setting, so that the linker actions can be controlled
on a library-by-library basis.
The default setting is -Wnoinclude_whole.
-W[no]inline
Enables [disables] the generation of inline code for C++ functions declared inline and
for C++ member functions declared within their class. This flag does not affect C code
nor does the compiler generate inline functions for other reasons. The default setting is
-Winline.
-Winline_compiler_generated_functions
Allows all compiler-generated functions to be inline. Specifying this flag does not
guarantee that a function can be inlined. If this flag is omitted, compiler-generated
functions are not inlined and are exported.
-Winline_string_literals
Allows the compiler to generate an inline function when a function takes the address of
a string literal. Specifying this flag does not guarantee that a function can be inlined.
If a function is inlined by this specification, its program will not conform to section
7.1.2 of the 1998 ISO C++ standard.
-W[no]innerlist
Enables [disables] the generation of instruction code mnemonics in the listing text
immediately following each corresponding statement. This flag is ignored unless
-Wnosuppress is specified. The default setting is -Wnoinnerlist.
-W[no]inspect
Designates [does not designate] the symbolic debugger as the default debugger for the
output object file. Use this flag with the -g flag. The default setting is -Wnoinspect.
This flag is set only if an executable object file is produced.
-Wlines=l
Specifies the maximum number of lines on a listing page, if a listing is generated. l
must be in the range 10 through 32767.
527188-024
Hewlett Packard Enterprise
2−49
c99(1)
OSS Shell and Utilities Reference Manual
-W[no]list
Temporarily enables [disables] the generation of listing text. Both the -Wlist and
-Wnolist flags are ignored unless -Wnosuppress is specified. The default setting is
-Wlist.
-WM
Preprocesses the specified source files and prints a list of files that the specified source
files depend on to the standard output file. The list can be used with the make utility.
No compilation or linking is performed. Unlike the -WP flag, no preprocessed files
with .i (for C) or .ii (for C++) suffixes are produced.
-W[no]map
Enables [disables] the generation of identifier maps in the listing. This flag is ignored
unless the -Wnosuppress flag is specified. The default setting is -Wnomap.
-Wmigration_check=32to64
Directs the compiler to emit additional warnings that detect valid C/C++ code that
potentially may behave in an unexpected manner when code designed for ilp32 is compiled using the lp64 data model. The -Wmigration_check=32to64 flag does not
require the -Wlp64 flag.
-WmoduleCatalog=&quot;catalog_spec&quot;
Specifies a NonStop SQL/MX module catalog name. The specified string is used only
if the input file does not contain an SQL/MX module directive or its module directive
does not specify a catalog name. The string cannot contain more than 128 characters.
This flag is valid only for preprocessor release 2.0 and newer.
-WmoduleGroup[=&quot;[group_spec&quot; ] ]
Specifies a string for a NonStop SQL/MX module group specification to use as a prefix
to the module name. The specified string is used only if the input file does not contain
an SQL/MX module directive or its module directive does not specify a group name.
The string cannot contain more than 31 characters.
This flag is valid only for preprocessor release 1.8 and newer.
-WmoduleSchema=&quot;schema_spec&quot;
Specifies a NonStop SQL/MX module schema name. The specified string is used only
if the input file does not contain an SQL/MX module directive or its module directive
does not specify a schema name. The string cannot contain more than 128 characters.
This flag is valid only for preprocessor release 2.0 and newer.
-WmoduleTableSet[=&quot;[tableset_spec&quot; ] ]
Specifies a string for a NonStop SQL/MX tableset specification to use as the first suffix
to the module name. The specified string is used only if the input file does not contain
an SQL/MX module directive or its module directive does not specify a tableset name.
The string cannot contain more than 31 characters.
This flag is valid only for preprocessor release 1.8 and newer.
-WmoduleVersion[=&quot;[version_spec&quot; ] ]
Specifies a string for a NonStop SQL/MX tableset specification to use as the second
suffix to the externally qualified module name that is written to the module file. The
string cannot contain more than 31 characters.
This flag is valid only for preprocessor release 1.8 and newer.
2−50
Hewlett Packard Enterprise
527188-024
User Commands (c)
c99(1)
-Wmultibyte_char
Directs the compiler to allow multibyte character sequences in comments, string
literals, and character constants.
-Wmxcmp[=&quot;args&quot;]
Invokes the NonStop SQL/MX compiler to process any file operands of the form file.m
and any module definition files produced when the NonStop SQL/MX preprocessor
was invoked. If the C or C++ compilation detects any errors in the source code, the
NonStop SQL/MX compiler is not invoked.
If a value is supplied for args, it must be one of the following:
replace
Directs the NonStop SQL/MX compiler to replace the existing module
or create a new one. The default action does not replace an existing
module.
warn
Directs the NonStop SQL/MX compiler to generate a warning rather
than an error if a table does not exist at compilation time.
verbose
Directs the NonStop SQL/MX compiler to display summary information as well as error and warning messages.
If more than one value is specified for args, the values must be separated by commas
without white space.
If the -Wmxcmp flag is specified more than once, only the last occurrence has an
effect. If the -Wmxcmp flag is specified with any of the options that prevent compilation (-E, -WH, -WM, -WP, or -Wsyntax), the -Wmxcmp flag is ignored.
-Wmxcmp_add=&quot;args&quot;
Specifies a string to pass to the NonStop SQL/MX compiler without validation or
change.
-Wmxcmp_files=&quot;file&quot;[,...]
Passes MDF files specified to mxcmp in release 1 compilation mode. Passes all
specified files without the .m extension to mxCompileUserModule in release 2 compilation mode.
-Wmxcmp_querydefault=&quot;attr_name=attr_value&quot;[,...]
Specifies attribute settings (CONTROL QUERY DEFAULT settings) to pass to the
NonStop SQL/MX compiler. These attribute settings override any corresponding
entries in the SYSTEM_DEFAULTS table.
-Wnoexceptions
Disables support for exceptions and exception handling. This flag can improve application performance by removing unneeded processing steps when an application does
not use exceptions or perform exception handling.
-Wnomain
Specifies that the object file should be linked without a main( ) function. This flag
prevents the compiler from specifying to the linker those modules and libraries that
provide customary run-time support for C or C++ programs. The resulting file has no
_MAIN function and no standard run-time libraries unless those are specified
separately in a file identified by the -Wxld_obey=file or -Weld_obey=file flag.
527188-024
Hewlett Packard Enterprise
2−51
c99(1)
OSS Shell and Utilities Reference Manual
-Wnostdinc
Suppresses the searching of the standard include directories to locate included files.
Refer to the Standard Include Directories subsection for details.
-Wnostdlib
Suppresses the searching of the standard library directories to locate libraries. Refer to
the Standard Library Directories subsection for details.
-Woptfile=&quot;filename&quot;
Specifies an optimizer file, which contains a list of functions that are to be optimized at
the level specified in the file. The optimizer file can raise or lower the optimize level
for the given functions.
Functions in the module that are not listed in the optimizer file are compiled at the
default optimize level.
Each line of the optimizer file can contain only one function name and the optimize
level (0, 1, or 2) that you want for that function. The function name must be the internal name used for linking; for C++ programs, the mangled name must be used.
-W[no]optional_lib
Indicates whether a library specified in the command stream should be considered
optional when the linker creates a loadfile.
When -Wnooptional_lib behavior is in effect, any library specified in a -l or -lib flag is
included in the .liblist section of the loadfile being created. When -Woptional_lib
behavior is in effect, a specified library can be omitted from the .liblist section of the
loadfile being created if omitting it would not affect how symbolic references are
resolved.
These flags can be specified as many times as needed in the command stream. Providing either flag overrides the current setting, so that the linker actions can be controlled
on a library-by-library basis.
If a library is specified more than once, and at least one specification occurs when
-Wnooptional_lib is in effect, the library is included in the .liblist section of the
loadfile being created.
The default behavior is -Wnooptional_lib.
-W[no]overflow_traps
Enables [disables] overflow traps. The default setting is -Wnooverflow_traps.
-WP
Preprocesses the specified source files. No compilation or linking is performed. Output is placed in corresponding files with .i (for C) or .ii (for C++) suffixes in the current
working directory.
If the -Wsqlmx flag is specified, embedded NonStop SQL/MX statements are processed.
The -E, -WH, and -WM flags override the -WP flag.
-Wpool_string_literals
Specifies that, within a compilation unit, multiple occurences of the same string literal
should occupy the same storage space. This flag applies to C++ compilations only; it
is ignored when C++ is not used.
The default assignment for multiple occurrences of a string literal gives them separate
storage space.
2−52
Hewlett Packard Enterprise
527188-024
User Commands (c)
c99(1)
-Wprofdir=name
Specifies the location in which to create the dynamic information (DYN) file when the
-Wprofgen flag directs the compiler to generate instrumented code. If the application
is to run in the Guardian environment, name must be a string that specifies a valid
Guardian subvolume. Otherwise, name must be a string that specifies a valid OSS
directory. If an invalid name is specified, no profiling information will saved.
If this flag is not specified, the DYN file is created in the default Guardian subvolume
or the current OSS working directory for the process.
If object files that were compiled with different profdir locations are linked together,
when the application is run, the DYN file is created in the location specified by one of
profdir flags. However, it is not possible to predict which profdir location will be
used.
For more information about profile-guided optimization, see the Code Profiling Utilities Manual.
-Wprofgen
Directs the compiler to generate instrumented code, used for profile-guided optimization. All or part of an application can be instrumented by turning this flag on or off for
individual compilations of object files. These object files can be linked into programs
or DLLs.
Instrumented code references symbols defined in the public DLL named zpgodll
(TNS/E) or xpgodll (TNS/X). When you link any program or DLL that contains instrumented code, the zpgodll (TNS/E) or xpgodll (TNS/X) DLL must be specified at link
time. For TNS/X, you must also link in pgo.a. The zpgodll (TNS/E) or xpgodll
(TNS/X) DLL is automatically linked when you specify the -Wcodecov or -Wprofgen
flags.
When you use the -Wprofgen flag and you use the compiler to automatically invoke
the xld or eld linker to build a program or DLL, the compiler passes the -l pgo option
to xld or eld.
Hewlett Packard Enterprise recommends that you do not combine code that has been
compiled with the -Wcodecov flag with code that has been compiled with the -Wprofgen flag in the same application.
For more information about profile-guided optimization, see the Code Profiling Utilities Manual.
-Wprofuse[=filename]
Directs the compiler to generate optimized code based on information in a dynamic
profiling information (DPI) file. This flag cannot be specified with either the
-Wcodecov or the -Wprofgen flags.
The DPI file is always in the current Guardian subvolume or OSS directory. You can
specify the name of the DPI file using the filename variable. If you do not specify a
filename, the name of the DPI file defaults to:
•
pgopti.dpi if the compilation is done in an OSS directory that is not a Guardian
subvolume.
•
pgodpi if the current OSS working directory is a Guardian subvolume.
For more information about profile-guided optimization, see the Code Profiling Utilities Manual.
527188-024
Hewlett Packard Enterprise
2−53
c99(1)
OSS Shell and Utilities Reference Manual
-Wr
Passes the -r option to the linker, which directs the linker to create a linkable object file
instead of an executable object file (the default).
-W[no]reexport
Tells the linker whether to mark any library specified in a -l operand or -L flag after this
flag for reexport in its libList entry in the loadfile being created. Specifying
-Wnoreexport leaves the library unmarked; specifying -Wreexport marks the library.
Reexport is a run-time attribute that is used by the rld loader to decide what DLLs it
needs to load.
-Wnoreexport is the default action.
These flags can be specified as many times as needed in the command stream. Providing either flag overrides the current setting, so that the linker actions can be controlled
on a library-by-library basis.
-Wrefalign=ref
Specifies the global reference alignment for pointers. ref can be either 2 or 8. The
default value is 8.
-WRefMemFuncsOnly
Specifies that the compiler provide debug information for referenced member functions
only. If this flag is not used, the compiler provides debug information for all member
functions in a class. This flag can be used to reduce the size of the debug region. You
must also specify the -g flag for this flag to have an effect.
-W[no]remarks
Enables [disables] compiler remark messages. Remark messages are informative diagnostics that are less severe than warnings and errors. The default setting is
-Wnoremarks.
-Wrunnamed
Directs the linker utility to set the RUNNAMED ON attribute in the output object file.
This attribute specifies that the object file runs as a named process. The default attribute setting is RUNNAMED OFF. The RUNNAMED ON attribute is set only if an
executable object file is produced.
-WRVU={h-series-rvu|l-series-rvu}
Sets the value of the _H_SERIES_RVU or _L_SERIES_RVU feature test macro,
respectively. These feature test macros are used in HPE NonStop standard header files
to determine whether declarations that depend on a specific RVU are available. No
checking is performed to determine whether the specified RVU actually exists. The
default value for this flag is the H-series RVU in which the compiler was last released.
To specify a specific J-series RVU, specify the equivalent H-series RVU.
If you specify an H-series RVU:
•
You must specify the value in the form H06.nn—for example
-WRVU=H06.05.
•
The -Wtarget flag is not required, but if you do specify it, you must specify
tns/e for the value.
•
For a C module compilation, this option causes the compiler to issue an error,
instead of a warning, for implicitly declared functions.
If you specify an L-series RVU:
2−54
Hewlett Packard Enterprise
527188-024
User Commands (c)
c99(1)
•
You must specify the value in the form Lyy.mm, where yy is the year and mm is
the month. For example, -WRVU=L15.02.
•
The -Wtarget flag is not required, but if you do specify it, you must specify
tns/x for the value.
•
For a C module compilation, this option causes the compiler to issue an error,
instead of a warning, for implicitly declared functions.
-W[no]saveabend
Specifies that a saveabend (process snapshot) file is [is not] created if the program terminates abnormally. The default setting is -Wnosaveabend. This flag is meaningful
only if an executable object file is produced.
-Wsavetemps
Saves all temporary and intermediate files created by compilation system components.
Use the -Wv flag to display the filenames.
-Wsqlmx[=&quot;args&quot; ]
Invokes the NonStop SQL/MX mxsqlc preprocessor before compilation for any file
operands of the form file.sql, file.ec, file.eC, file.ecpp, file.ecxx, or file.ec++. If an argument is specified, it must be one of the following:
listing
Directs the preprocessor to write its diagnostic messages to a file
named file.eL in addition to the standard error file, where file is the
name of the primary source file.
noansi_varchars
Directs the preprocessor to turn off generation of ANSI varchar data.
This option is valid only for preprocessor release 1.8 and newer.
noline
Directs the preprocessor to suppress generation of #line directives in
the preprocessed output source file that it creates.
null_terminate
Directs the preprocessor to terminate host variable strings with a
NULL before fetch operations into them.
This option is valid only for preprocessor release 1.8 and newer.
preprocess_only
Directs the preprocessor to suppress all steps after preprocessing.
This option is valid only for preprocessor release 2.0 and newer.
process_includes
Directs the SQL/MX preprocessor to process one level of include files.
This setting applies only to include files for SQL definitions; it does
not apply to include file processing performed by the C/C++ compiler.
refrain_r2
Directs the SQL/MX preprocessor to use only the rules and features
that apply to preprocessors prior to release 2.0. The default action is to
use only the rules and features that apply to preprocessors beginning
with release 2.0.
This option is valid only for preprocessor release 2.0 and newer.
527188-024
Hewlett Packard Enterprise
2−55
c99(1)
OSS Shell and Utilities Reference Manual
IEEE_float
Directs the SQL/MX preprocessor to use IEEE floating-point format
instead of Tandem floating-point format. This option is valid only for
preprocessor release 2.0 and newer.
For preprocessors before release 2.0, the default floating-point format
is the same as that of the c99 compiler (IEEE format). For preprocessors beginning with release 2.0, the default floating-point format is
IEEE format.
If more than one argument is specified, the arguments must be separated by commas
without any white space.
-Wsqlmxadd[=&quot;args&quot; ]
Specifies a string to pass to the SQL/MX preprocessor without validation or change.
-W[no]stdfiles
Generates a Guardian program that opens [does not open] the standard input, output,
and error files by default. You can specify this flag only if -Wsystype=guardian is
also specified. The default setting is -Wstdfiles.
-W[no]suppress
Disables [enables] the generation of listings. The listing is placed in a file in the
current working directory with the same name as the source, but with a suffix of .L.
The default setting is -Wsuppress.
-Wsyntax
Performs only a syntax check. No code is generated.
-Wsystype={guardian | oss }
Specifies the target execution environment. This flag selects definitions used during
compilation, program startup code, default libraries, and system routines used during
linking. The default setting is -Wsystype=oss. (To run files compiled for a Guardian
TNS/E target execution environment, you must set the file code to 800 with a FUP
ALTER filename, CODE 800 command from a TACL prompt. To run files compiled
for a Guardian TNS/X target execution environment, you must set the file code to 500
with a FUP ALTER filename, CODE 500 command from a TACL prompt.)
-Wtarget=platform
Specifies the system architecture for which code should be generated. The supported
values for TNS/E are -Wtarget=ipf and -Wtarget=tns/e. The supported values for
TNS/X are -Wtarget=x86 and -Wtarget=tns/x.
-Wtimestamp=value
Provides a creation timestamp for the NonStop SQL/MX preprocessor that is written to
the two output files created by the preprocessor. See the HPE NonStop SQL/MX Programming Manual for C and COBOL for details about the form for the value allowed
for the timestamp. If this option is specified more than once, only the last occurrence
has an effect. Note that c99 does not check that value is valid; it relies on the NonStop
SQL/MX preprocessor to validate this argument.
This flag is ignored unless the -Wsqlmx flag is also specified.
-Wu=&quot;symbol_name&quot;
Tells the linker to add symbol_name as an undefined symbol. This causes the linker to
search for this symbol in any archive libraries that are specified after this flag on the
command line or in an obey file.
The search constraint specified by the -Wu flag is overridden by use of the
-Winclude_whole flag.
2−56
Hewlett Packard Enterprise
527188-024
User Commands (c)
-Wv
c99(1)
Echoes the command line to the standard error file as each component of the compilation system is run.
-Wverbose
Echoes the command line to the standard error file as each component of the compilation system is run and causes additional output and listings from the SQL compiler to
be sent to the standard output file. SQL compiler error messages are sent to the standard error file.
-Wversion3
Specifies which C++ dialect to compile.
-Wversion3 specifies the dialect released with G06.20. This version supports an
ANSI/ISO Standard C++ Library corresponding to ISO/IEC IS 14882. This is the
default. The c99 utility does not support earlier dialects.
All modules of a C++ program must be compiled and linked using the same dialect.
-Ww
Suppresses the printing of compiler warning messages. This flag overrides any
-Wwarn or -Wnowarn flags.
-W[no]warn[=w [,w ] ... ]
For each w value that appears, this flag enables [disables] the compiler warning message specified by w.
Declaring a w value enables [disables] the specified message. Specifying -Wwarn
[-Wnowarn] by itself enables [disables] all compiler warning messages.
If -Wwarn=w is specified, then -Wnowarn must also be specified or the -Wwarn=w
flag is ignored. If -Wnowarn=w is specified, then -Wwarn need not be specified.
If white space is present after the commas, the list of warning message numbers should
be enclosed in quotation marks.
-Wwarn is the default specification for this flag. -Ww overrides the -W[no]warn flag.
-Wx
Strips part of the symbol table from the output object file but keeps information necessary for the object file to be used as input to a linker utility again. This flag is typically
used with -Wr.
-Wxld=&quot;args&quot;
Passes the arguments specified in args to the xld utility after any other arguments are
passed.
Use this flag to pass arguments to xld when creating a PIC file. c99 does not check the
validity of xld arguments.
You can only use this flag when you use one of the following flags:
-Wcall_shared or -Wshared
This flag is ignored when the command does not initiate linking.
-Wxld_obey=&quot;file&quot;
Directs the xld utility to read additional command-line arguments from the command
file specified in the file argument. The arguments are processed as if they had been
passed directly to xld in place of file. c99 does not verify the existence or readability
of file.
527188-024
Hewlett Packard Enterprise
2−57
c99(1)
OSS Shell and Utilities Reference Manual
You can only use this flag if you use one of the following flags:
-Wcall_shared or -Wshared
This flag is ignored when the command does not initiate linking.
Multiple instances of the -D, -I, and -U flags and of the -l operands can be specified.
The position of -l library operands within a list of flags affects the order in which the libraries are
searched.
The order of specifying the -I and -L flags is significant.
Quotation marks around string values in flags are optional but recommended to avoid errors
caused by shell substitutions or deletions.
Refer to the C/C++ Programmer’s Guide for details.
DESCRIPTION
c99 is a driver program for the native C and C++ language compilation system. The c99 utility
compiles C and C++ programs using the native TNS/X or TNS/E compilers. Source files must
comply with the C99 (ISO/IEC 9899:1999) standard, but are permitted to use Hewlett Packard
Enterprise extensions if you specify the -Wextensions flag. For source files that comply with the
C89 standard or for programs that require the compiler to process C source files traditional Kernighan and Ritchie C or Common C rules, instead of according to ISO/ANSI Standard C, use the
c89 utility with the -Wkr flag.
This reference page describes using c99 in the OSS environment.
c99 performs simple validation of the flags and operands from the arguments on its command
line and, depending on those arguments, invokes components of the language compilation system. c99 does not verify the existence of files it passes to compilation system components. It
does verify that the operand suffix identifies a valid operand to pass to compilation system components. c99 and the components it runs issue messages to the standard error file.
c99 performs the following steps:
1.
If the corresponding -W flag is specified, invokes the SQL/MX preprocessor to process
any embedded SQL statements in C or C++ source files, creating C only, C++ only, or
module definition files as appropriate.
2.
Compiles any specified C and C++ source files or source files produced by Step 1 into
object files.
3.
If the -Wmxcmp flag is specified, invokes the NonStop SQL/MX compiler to process
files created by Step 1 or specified as module definition files in the command.
4.
Links the object files together with any libraries specified on the command line. (This
occurs if no flags that prevent linking are specified and the source files are compiled
without errors.)
5.
Writes an executable object file or library to the file specified by a -o flag (if present) or
to the file a.out.
Libraries can be:
•
Archives, with a suffix of .a
•
DLLs, with a suffix of .so
The default executable file in the Guardian file system is aout in the subvolume from which c99
is invoked.
2−58
Hewlett Packard Enterprise
527188-024
User Commands (c)
c99(1)
If only a single source file is given and no flags that suppress linking are specified, then the file is
compiled into an object file and linked into an executable object file. If the executable file is
created successfully, the object file is removed.
c99 places object files (loadfiles) in the current working directory with the same base name as the
corresponding source file, but with a suffix of .o.
c99 also names several temporary or intermediate files that are created during the compilation
process. Like the output object file, c99 places these files in the current working directory. c99
removes these temporary or intermediate files unless the -Wsavetemps flag is specified.
If -Wsystype=oss is set, the C and C++ compilers define the predefined feature-test macros
_OSS_TARGET and _XOPEN_SOURCE. If -Wsystype=guardian is set, the C and C++ compilers define the predefined feature-test macros _GUARDIAN_TARGET and
_TANDEM_SOURCE. These macros are used in the standard header files to determine the execution environment of a program. The feature-test macros can also be defined with a -D flag.
Because these macros are defined internally, not by c99, the macros are not defined when
-Wdryrun or -Wv are used.
Dynamic and Static Linking
The -WBdllsonly and -WBdynamic flags specify dynamic linking. The -WBstatic flag specifies
static linking. In dynamic linking, the eld utility first searches for a dynamic-link library (DLL).
If a DLL cannot be found, the linker then searches for an archive file. If neither of these files are
found, an error is issued. In static linking, the linker searches for an archive file but does not
search for a DLL.
If the archive file cannot be found, an error is issued.
Dynamic and static linking are not exact opposites. Dynamic linking accepts either a DDL or an
archive, but static linking accepts only an archive.
Unlike other c99 flags, multiple -WBdllsonly, -WBdynamic, and -WBstatic flags can be
specified in a single c99 invocation. Thus, it is possible to perform dynamic linking for some -l
operands and static linking for others.
The -WBdllsonly, -WBdynamic, and -WBstatic flags specified to c99 affect linking arguments
specified in -Weld, -Weld_obey, -Wxld, or -Wxld_obey flags. Each specification remains in
effect until another is encountered. To change how a linker performs linking for such arguments,
you can specify eld or xld flags that control linking within the argument list. All linkers perform
dynamic linking by default. See the xld(1) or eld(1) reference page for more information.
Handling of Files in the Guardian File System
Files in the Guardian file system can be accessed using OSS pathname syntax
(/G/volume/subvol/fileID).
c99 requires that files in the Guardian file system be identified with a suffix as is done in the OSS
file system. Because Guardian filenames do not allow the .suffix format, the period is dropped
and the suffix becomes the last character of the filename. However, the .suffix format must be
used when specifying the file to c99.
Thus, the Guardian file system file $VOL.SUBVOL.FILEC, which identifies a C source file, is
specified to c99 as /G/VOL/SUBVOL/FILE.c. Likewise, c99 generates an object file
$VOL.SUBVOL.FILEO that can be specified to c99 again as /G/VOL/SUBVOL/FILE.o.
The default executable object file when the current working directory is in the Guardian file system is aout.
527188-024
Hewlett Packard Enterprise
2−59
c99(1)
OSS Shell and Utilities Reference Manual
Predefined Preprocessor Symbols and Macros
c99 defines the following preprocessor symbols and feature-test macros:
_ _cplusplus
Directs the preprocessor to process the source text as C++ source code. c99 defines
this symbol if the -Wcplusplus flag is specified or the name of an OSS source file ends
in a C++ suffix (.ii, .C, .cpp, .c++, .cxx, .cc, .eC, .ecpp, .ec++, .ecc, or .ecxx).
_TANDEM_SOURCE
Makes visible to the preprocessor identifiers required or permitted by extensions made
by HPE NonStop. c99 defines this feature-test macro if the -Wextensions flag is
specified.
_XOPEN_SOURCE
Makes visible to the preprocessor identifiers required or permitted by extensions made
by the XPG4 specification. c99 defines this feature-test macro by default unless the
-Wsystype=guardian flag is specified.
There are other feature-test macros defined by the compiler itself, not by c99. These feature-test
macros do not appear in the output of -Wv and -Wdryrun flags. Refer to the C/C++
Programmer’s Guide for further information on feature-test macros.
Operands
An operand is in the form of:
•
A pathname
•
-l library
•
-WBdllsonly
•
-WBdynamic
•
-WBstatic
At least one operand of the pathname form must be specified. The following operands are supported:
file.a
An archive library of object files typically produced by the ar command and passed
directly to a linker utility
file.c
A C language source file to be preprocessed, compiled, and optionally linked
file.C
A C++ language source file to be preprocessed, compiled, and optionally linked
file.cc
A C++ language source file to be preprocessed, compiled, and optionally linked
file.cpp A C++ language source file to be preprocessed, compiled, and optionally linked
file.cxx
A C++ language source file to be preprocessed, compiled, and optionally linked
file.c++ A C++ language source file to be preprocessed, compiled, and optionally linked
file.ec
2−60
A C language source file containing embedded NonStop SQL/MX information to be
preprocessed, compiled, and optionally linked
Hewlett Packard Enterprise
527188-024
User Commands (c)
c99(1)
file.eC
A C++ language source file containing embedded NonStop SQL/MX information to be
preprocessed, compiled, and optionally linked
file.ecc
A C++ language source file containing embedded NonStop SQL/MX information to be
preprocessed, compiled, and optionally linked
file.ecpp A C++ language source file containing embedded NonStop SQL/MX information to be
preprocessed, compiled, and optionally linked
file.ecxx A C++ language source file containing embedded NonStop SQL/MX information to be
preprocessed, compiled, and optionally linked
file.i
A preprocessed C source file to be compiled and optionally linked
file.ii
A preprocessed C++ source file to be compiled and optionally linked
file.m
A module definition file (MDF) containing NonStop SQL/MX information for a
corresponding C source file
file.o
An object file passed directly to a linker utility
file.so
A dynamic-link library (DLL) containing position-independent code (PIC) for use by
the xld, eld, or rld utility
file.sql
A C language source file containing embedded NonStop SQL/MX information to be
preprocessed, compiled, and optionally linked
-l library A file to be searched by a linker utility to resolve current unresolved external references; eld or xld searches for files named liblibrary.so and liblibrary.a,
A library is searched when its name is encountered, so the placement of -l is
significant. See the Standard Libraries subsection for more details.
-WBdllsonly
Specifies that the linker utility uses dynamic linking when searching for dynamic-link
libraries specified in subsequent -l operands; placement of this operand is significant
(refer to the Dynamic and Static Linking subsection for details)
-WBdynamic
Specifies that the linker utility uses dynamic linking when searching for libraries
specified in subsequent -l operands; placement of this operand is significant (refer to
the Dynamic and Static Linking subsection for details)
-WBstatic
Specifies that the linker utility uses static linking when searching for libraries specified
in subsequent -l operands. Placement of this operand is significant. Refer to the
Dynamic and Static Linking subsection for details.
Input Files
An input file is one of the following:
527188-024
•
A text file containing a C language or C++ language source program
•
An object file in the format produced by the command c99 -c
Hewlett Packard Enterprise
2−61
c99(1)
OSS Shell and Utilities Reference Manual
•
A library of object files in the format produced by archiving zero or more object files
using the ar command
•
A linkfile or loadfile produced by the eld or xld utility
•
A module definition file created by the NonStop SQL/MX preprocessor.
When the -Wsqlmx flag is specified, c99 uses the source file filename extension to determine the
language mode (C or C++) and the names of the source files created by the NonStop SQL/MX
preprocessor.
The name of a created source file is the name of the primary source file plus one of the following
extension transformations:
•
If the primary source file suffix is .ec or .sql and the -Wcpluplus flag is not specified, the
created source file has the suffix .c and uses the C language mode.
•
If the primary source file suffix is .ec or .sql and the -Wcplusplus flag is also specified,
the created source file has the suffix .cpp and uses the C++ language mode.
•
If the primary source file suffix is .eC, .ecpp, .ec++, .ecc, or .ecxx, the created source file
has the suffix .C, .cpp, .c++, .cc, or .cxx, resapectively, and uses the C++ language mode.
When c99 is passed a file name suffixed with .C, .cpp, .c++, .cc, or .cxx, that file is not passed to
the NonStop SQL/MX preprocessor. Such files are assumed to contain only C or C++ statements
without embedded NonStop SQL/MX information.
Output Files
An output file can be a preprocessed source file, an object file, or an executable file.
Standard Output File
The standard output file is empty unless a -E, -WM, or -WP flag is specified. If one of these
flags is specified, preprocessed source code is sent to the standard output file. When -WH is
used, the standard output file contains a line indicating which file is currently being operated
upon.
Standard Error File
The standard error file contains diagnostic and informational messages from c99 and the compilation components it calls. If more than one source file operand is specified, then for each such
file the format &quot;%s: \n&quot;,file is used to print the name of the source file before it is processed.
Standard Libraries
The c99 utility recognizes the following -l operands for standard libraries.
-l c
Contains all library functions provided by HPE NonStop that are specified in the XPG4
Version 2 (X/Open UNIX) specification, including those functions listed as residing in
the math.h header file.
-l C
Contains the correct C++ run-time libraries, based on the value of the -Wversionn flag.
If the -Wversionn flag is omitted, the default version C++ library is used.
When you specify the -Wcplusplus and -Wversionn flags, you need not specify -l C;
all needed libraries are automatically linked. When you specify the -Wversion3 flag,
cppinit3.o is linked for a nonPIC program or cppinit4.o is linked for a PIC program.
2−62
Hewlett Packard Enterprise
527188-024
User Commands (c)
c99(1)
-l l
Contains all functions required by the C language output of the lex utility that are not
made available through the -l c operand.
-l m
Contains all functions referenced in the math.h header file.
-l y
Contains all functions required by the C language output of the yacc utility that are not
made available through the -l c operand.
In the absence of flags that inhibit invocation of a linker utility, such as -c and -E, c99 directs the
linker to search the standard C library after all other object files and libraries are searched.
If a C++ source file operand or a -Wcpluscplus flag is specified, c99 directs the linker to search
the C++ run-time library before it searches the standard C library. If you want the libraries to be
searched in a specific order or linking options to be processed in a specified order, you should
start the appropriate linker (eld or xld) directly from the OSS shell and not use the c99 command
to do the linking.
Libraries residing in the Guardian file system cannot be specified as -l operands because of the
naming convention. They can be specified in the desired order with the -Weld or -Wxld flag.
Standard Include Directories
The standard include directory contains the standard C and C++ header files. c99 passes a -I flag
naming this directory as the last -I flag when processing source files. In the OSS environment,
the directory is /usr/include.
Standard Library Directories
The standard library directories contain the dynamic-link libraries (DLLs) used by the eld or xld
utility to resolve external references.
In the OSS environment, a linker first searches the directory that contains the current version of
the operating system image (the active /G/system/sysnn directory). The linker then searches the
/lib, /usr/lib, and /usr/local/lib directories.
The value of the COMP_ROOT environment variable is added to the beginning of /lib, /usr/lib,
and /user/local/lib. By default, the value of COMP_ROOT is null in the OSS environment.
See the eld(1) or xld(1) reference page for more information about controlling the search order
for a PIC file linker.
Default Flags
If no flags are specified, c99 behaves as if the following flags were specified:
-Wsystype=oss -o a.out -Wenv=common -Wfieldalign=auto
-Wrefalign=8 -Wansistreams -Winline
-WIEEE_float
-Wlist -Wnoinnerlist -Wsuppress -Wstdfiles -Wnomap
-Wnoextensions -Wnooverflow_traps -Wnoremarks
-Wnoinspect -Wnosaveabend -WBdynamic
-Wcall_shared
-Wnoincludewhole -Wnoreexport -Wnooptionl_lib
-Wversion3
-Wwarn
-D_XOPEN_SOURCE -I/usr/include -L/lib -L/usr/lib
-L/usr/local/lib -lc
527188-024
Hewlett Packard Enterprise
2−63
c99(1)
OSS Shell and Utilities Reference Manual
Environment Variables
The following environment variables affect the execution of c99.
CCOMBE
Determines the pathname of the ccombe component of the C and C++ compilers.
/usr/cmplr/ccombe is the default location for the OSS environment.
COMP_ROOT
Changes the default pathnames for:
•
The c99 compilation system components
•
The standard include directory
•
The standard library directories
In the OSS environment, the string specified in COMP_ROOT is added to the beginning of the default pathnames.
If a component’s environment variable is set explicitly, the COMP_ROOT environment variable does not modify that component’s environment variable.
ELD
Determines the pathname of the eld utility invoked by c99. /usr/bin/eld is the default
location for the OSS environment.
MXCMP
Determines the pathname of the NonStop SQL/MX release 1 compiler.
/G/system/system/mxcmp is the default.
MXCMPUM
Determines the pathname of the NonStop SQL/MX release 2 compiler.
/usr/tandem/sqlmx/bin/mxCompileUserModule is the default.
MXSQLC
Determines the pathname of the C/C++ NonStop SQL/MX preprocessor, mxsqlc.
/usr/tandem/sqlmx/bin/mxsqlc is the default.
SQLMX_PREPROCESSOR_VERSION
Indicates the preprocessor rules and features to be used. Specifying the value 800
causes rules and features associated with release 1.8 to be used; the mxcmp compiler
is used and only MDF files and annotated source files are produced, while rules and
features associated with release 2.0 and later are ignored. Specifying a value of 1200
or larger or not specifying a value causes rules and features associated with release 2.0
and later to be used; the mxCompileUserModule compiler is used and annotated
source files that contain embedded module definitions are produced instead of MDF
files, while restrictions associated with release 1.8 or earlier are ignored.
TMPDIR
Determines the pathname that overrides the default directory for temporary files
created by c99 and the components it invokes. By default, temporary files are stored in
the /tmp directory. If TMPDIR is set to a directory that does not exist or is not writeable, c99 uses the default directory as described on the tempnam(3) reference page.
EXAMPLES
1.
The command
c99 test1.c
compiles the source file test1.c and links the object file into an executable file
a.out in the current working directory.
2−64
Hewlett Packard Enterprise
527188-024
User Commands (c)
2.
c99(1)
The command
c99 -Wnowarn -Wwarn=262 test1.c
compiles the source file test1.c and links the object file into an executable file
a.out in the current working directory. All compiler warning messages except
message number 262 are disabled.
3.
The command
c99 -c /home/me/app/test1.c
compiles the source file /home/me/app/test1.c into the object file test1.o in the
current working directory.
4.
The command
c99 -g -o test2 x.c y.c z.c
-Wnostdinc
-I/dev/product/app/src
-I/new/usr/include
-lclient -lserver
-L/dev/product/lib
-L/new/usr/lib
compiles the source files x.c, y.c, and z.c and links their respective object files
x.o, y.o, and z.o into the executable file test2. Symbolic information is generated by the compiler and retained by the linker utility for debugging.
Included files are searched for in the directories /dev/product/app/src and
/new/usr/include; /usr/include is not searched. The linker searches for the
libraries libclient.srl and libserver.srl in the directories /dev/product/lib and
/new/usr/lib before searching in the directories /G/system/sysnn, /lib, /usr/lib,
and /usr/local/lib.
5.
The command
c99 -g -o test2 x.c y.c z.c
-Wcall_shared
-Wnostdinc
-I/dev/product/app/src
-I/new/usr/include
-lclient -lserver
-L/dev/product/lib
-L/new/usr/lib
compiles the source files x.c, y.c, and z.c and links their respective object files
x.o, y.o, and z.o into the loadfile test2. Symbolic information is generated by
the compiler and retained by the linker utility for debugging.
Included files are searched for in the directories /dev/product/app/src and
/new/usr/include; /usr/include is not searched. The linker searches for the
libraries libclient.so and libserver.so in the directories /dev/product/lib and
/new/usr/lib before searching in the directories /G/system/sysnn, /lib, /usr/lib,
and /usr/local/lib.
6.
The command
c99 -o test3 -O -DTYPE=3
-I/usr/friend
-I/usr/myself/headers
foo.c bar.o baz.c
527188-024
Hewlett Packard Enterprise
2−65
c99(1)
OSS Shell and Utilities Reference Manual
compiles the source files foo.c and baz.c and links their respective object files
with bar.o into the object file test3.o. The preprocessor symbol TYPE is
defined to 3, and full optimization is performed by the compiler. The compiler
looks for included files in the directory /usr/friend, then in
/usr/myself/headers, then in /usr/include.
7.
The command
c99 -c -Wsqlmx file1.eC file2.ecc file3.ec++
uses the mxsqlc preprocessor on several C++ source files and also compiles
them, but does not link the results. If no errors are detected in either the
preprocessing or compilation steps, the following files are created: file1.m,
file1.C, file2.m, file2.cc, file3.m, file3.c++, file1.o, file2.o, file3.o.
8.
The command
c99 -Wsqlmx -E file.ec &gt; file-cpp.c
uses the mxsqlc preprocessor to expand embedded SQL statements and
invokes the NonStop SQL/MX preprocessor to create a single source file containing only C statements.
9.
The command
c99 -c -Wsqlmx file1.C file2.ecc file3.ec++ file4.cpp
illustrates mixing C++ source files, with and without NonStop SQL/MX information, on a single command line. Only source files that have names with one
of the SQL extension suffixes invoke the mxsqlc preprocessor. However, all
files are compiled but not linked. If no errors are detected in either the preprocessing or compilation steps, the following files are created: file2.m, file2.cc,
file3.m, file3.c++, file1.o, file2.o, file3.o, file4.o.
10. The command
c99 -Wmxcmp -Wmxcmp_files=test1.m,test1.o
SQL-compiles the MDF file test1.m using the NonStop SQL/MX mxcmp
compiler and processes the file test1.o using the NonStop SQL/MX mxCompileUserModule without also linking it.
11. The command
c99 file.c -lc -WBstatic -l archive -WBdynamic -l native
compiles the source file file.c and links the object file into an executable file
a.out in the current working directory. The linker performs dynamic linking by
searching first for the file libc.srl and then libc.a. The linker then performs
static linking by searching for the file libarchive.a. The linker then performs
dynamic linking by searching first for the file libnative.srl and then
libnative.a.
12. The command
c99 file.c -lc -Wcall_shared -WBstatic
-l archive -WBdynamic
-l native
compiles the source file file.c and links the object file into loadfile a.out in the
current working directory. The linker performs dynamic linking by searching
first for the file libc.so and then libc.a. The linker then performs static linking
by searching for the file libarchive.a. The linker then performs dynamic
2−66
Hewlett Packard Enterprise
527188-024
User Commands (c)
c99(1)
linking by searching first for the file libnative.so and then libnative.a.
13. The command
c99 -Wmxcmp -c module.m
invokes the NonStop SQL/MX compiler to process the module definition file
module.m.
FILES
/usr/bin/c99
Native c99 in the OSS environment.
/G/system/sysnn/wcppcdll
C++ run-time library function object code for 64-bit L-series processes;
linked automatically when you compile and link C++ surce files or when you
specify the -Wcplusplus flag.
/G/system/sysnn/xcppcdll
C++ run-time library function object code for 32-bit L-series processes;
linked automatically when you compile and link C++ surce files or when you
specify the -Wcplusplus flag.
/G/system/sysnn/ycppcdll
C++ run-time library function object code for 64-bit J-series and H-series
processes; linked automatically when you compile and link C++ surce files
or when you specify the -Wcplusplus flag.
/G/system/sysnn/zcppcdll
C++ run-time library function object code for 32-bit J-series and H-series
processes; linked automatically when you compile and link C++ surce files
or when you specify the -Wcplusplus flag.
/G/system/sysnn/wcpp3dll
C++ run-time library function object code for 64-bit L-series processes;
linked automatically when you compile and link C++ surce files or when you
specify the -Wcplusplus flag.
/G/system/sysnn/xcpp3dll
C++ run-time library function object code for 32-bit L-series processes;
linked automatically when you compile and link C++ surce files or when you
specify the -Wcplusplus flag.
/G/system/sysnn/ycpp3dll
C++ run-time library function object code for 64-bit J-series and H-series
processes; linked automatically when you compile and link C++ surce files
or when you specify the -Wcplusplus flag.
/G/system/sysnn/zcpp3dll
C++ run-time library function object code for 32-bit J-series and H-series
processes; linked automatically when you compile and link C++ surce files
or when you specify the -Wcplusplus flag.
/G/system/sysnn/wcredll
Common Run-Time Environment (CRE) function object code for 64-bit Lseries processes; linked automatically.
527188-024
Hewlett Packard Enterprise
2−67
c99(1)
OSS Shell and Utilities Reference Manual
/G/system/sysnn/xcredll
Common Run-Time Environment (CRE) function object code for 32-bit Lseries processes; linked automatically.
/G/system/sysnn/ycredll
Common Run-Time Environment (CRE) function object code for 64-bit Jseries and H-series processes; linked automatically.
/G/system/sysnn/zcredll
Common Run-Time Environment (CRE) function object code for 32-bit Jseries and H-series processes; linked automatically.
/G/system/sysnn/wcrtldll
C run-time library function object code for 64-bit L-series processes; linked
automatically.
/G/system/sysnn/xcrtldll
C run-time library function object code for 32-bit L-series processes; linked
automatically.
/G/system/sysnn/ycrtldll
C run-time library function object code for 64-bit J-series and H-series
processes; linked automatically.
/G/system/sysnn/zcrtldll
C run-time library function object code for 32-bit J-series and H-series
processes; linked automatically.
/G/system/sysnn/wicnvdll
Function object code for 64-bit L-series processes; linked automatically.
/G/system/sysnn/xicnvdll
Function object code for 32-bit L-series processes; linked automatically.
/G/system/sysnn/yicnvdll
Function object code for 64-bit J-series and H-series processes; linked
automatically.
/G/system/sysnn/zicnvdll
Function object code for 32-bit J-series and H-series processes; linked
automatically.
/G/system/sysnn/wi18ndll
Internationalization function object code for 64-bit L-series processes; linked
automatically.
/G/system/sysnn/xi18ndll
Internationalization function object code for 32-bit L-series processes; linked
automatically.
/G/system/sysnn/yi18ndll
Internationalization function object code for 64-bit J-series and H-series
processes; linked automatically.
2−68
Hewlett Packard Enterprise
527188-024
User Commands (c)
c99(1)
/G/system/sysnn/zi18ndll
Internationalization function object code for 32-bit J-series and H-series
processes; linked automatically.
/G/system/sysnn/wosscdll
Function object code for 64-bit L-series processes; linked automatically.
/G/system/sysnn/xosscdll
Function object code for 32-bit L-series processes; linked automatically.
/G/system/sysnn/yosscdll
Function object code for 64-bit J-series and H-series series processes; linked
automatically.
/G/system/sysnn/zosscdll
Function object code for 32-bit J-series and H-series processes; linked
automatically.
/G/system/sysnn/wossedll
Function object code for 64-bit L-series processes; linked automatically.
/G/system/sysnn/xossedll
Function object code for 32-bit L-series processes; linked automatically.
/G/system/sysnn/yossedll
Function object code for 64-bit J-series and H-series processes; linked
automatically.
/G/system/sysnn/zossedll
Function object code for 32-bit J-series and H-series processes; linked
automatically.
/G/system/sysnn/wossfdll
Function object code for 64-bit L-series processes; linked automatically.
/G/system/sysnn/xossfdll
Function object code for 32-bit L-series processes; linked automatically.
/G/system/sysnn/yossfdll
Function object code for 64-bit J-series and H-series processes; linked
automatically.
/G/system/sysnn/zossfdll
Function object code for 32-bit J-series and H-series processes; linked
automatically.
/G/system/sysnn/wosskdll
Function object code for 64-bit L-series processes; linked automatically.
/G/system/sysnn/xosskdll
Function object code for 32-bit L-series processes; linked automatically.
/G/system/sysnn/yosskdll
Function object code for 64-bit J-series and H-series processes; linked
automatically.
527188-024
Hewlett Packard Enterprise
2−69
c99(1)
OSS Shell and Utilities Reference Manual
/G/system/sysnn/zosskdll
Function object code for 32-bit J-series and H-series processes; linked
automatically.
/G/system/sysnn/xpgodll
Symbols referenced by instrumented code for L-series processes; must be
linked when you link a program or DLL that contains instrumented code;
linked automatically when you specify the -Wcodecov or -Wprofgen flags.
/G/system/sysnn/zpgodll
Symbols referenced by instrumented code for J-series and H-series
processes; must be linked when you link a program or DLL that contains
instrumented code; linked automatically when you specify the -Wcodecov or
-Wprofgen flags.
/G/system/sysnn/wsecdll
Security function object code for 64-bit L-series processes; linked automatically.
/G/system/sysnn/xsecdll
Security function object code for 32-bit L-series processes; linked automatically.
/G/system/sysnn/ysecdll
Security function object code for 64-bit J-series and H-series processes;
linked automatically.
/G/system/sysnn/zsecdll
Security function object code for 32-bit J-series and H-series processes;
linked automatically.
DIAGNOSTICS
If c99 encounters a compilation error that prevents an object file from being created, it writes a
diagnostic message to the standard error file and continues to compile other source code
operands. However, it does not perform program linking and returns a nonzero exit status.
If the linking is unsuccessful, c99 writes a diagnostic message to the standard error file and
returns a nonzero exit status.
EXIT VALUES
The following exit values are returned:
0 (zero)
Successful completion.
&gt;0
An error occurred.
RELATED INFORMATION
Commands: ar(1), c89(1), eld(1), strip(1), xld(1).
Functions: fp_class(3), tempnam(3).
Files: float(4).
2−70
Hewlett Packard Enterprise
527188-024
User Commands (c)
c99(1)
STANDARDS CONFORMANCE
All -W options are HPE NonStop extensions to the POSIX and XOPEN standards.
527188-024
Hewlett Packard Enterprise
2−71
cal(1)
OSS Shell and Utilities Reference Manual
NAME
cal - Displays a calendar
SYNOPSIS
cal [ [month] year]
DESCRIPTION
The cal command writes to the standard output file a Gregorian calendar for the specified month
or year.
If you provide two operands, cal assumes the first to be month and the second to be year. The
month operand specifies the month for which you want the calendar, and it must be a number in
the range 1 through 12 for January through December, respectively. The year operand specifies
the year for which you want the calendar, and it must be a number in the range 1 through 9999.
Because cal can display a calendar for any year in this range, enter a full 4-digit year (for example, 1993) rather than just the last two digits.
If you provide only one operand, cal assumes that operand to be year (even if it is in the range 1
through 12) and displays a calendar for all 12 months of that year.
If you do not provide any operands, cal displays a calendar for the current month of the current
year.
Environment Variables
The cal command checks the LC_TIME environment variable and uses the correct headers for
the current locale. If LC_TIME is not set, cal checks the value of LANG. If neither variable is
set, you receive English headers.
EXAMPLES
1.
To display a calendar for February 1999, enter:
cal 2 1999
2.
To print a calendar for the entire year of 1999, enter:
cal 1999 print
3.
To display a calendar for the year 84 of the Common Era, enter:
cal 84
EXIT VALUES
The cal command returns the following exit values:
0 (zero)
The cal utility successfully finished its processing.
&gt;0
An error occurred.
RELATED INFORMATION
Files: locale(4).
STANDARDS CONFORMANCE
This command conforms to the XPG4 Version 2 specification with extensions, except for the following features:
•
2−72
The SHELL and TZ environment variables are not used.
Hewlett Packard Enterprise
527188-024
User Commands (c)
cancel(1)
NAME
cancel - Removes job requests from the line printer spooling queue
SYNOPSIS
cancel [request-ID ...] location ...
The cancel command removes one or more requests from a printer’s spool queue.
DESCRIPTION
Because the spooling directory is protected from users, using the cancel command is normally
the way a user can remove a request.
Users can cancel jobs they initiated. Superusers with special privileges can cancel jobs initiated
by other users.
You can remove an individual request from a queue by specifying its request ID. (You can obtain
the request ID by using the lp command.)
The argument location specifies a spooler location where the job request to be removed resides.
If no ID is specified, all the jobs initiated by the user that reside in the specified location are canceled. If location is not specified, the system default location is used.
The cancel command does not return a message if there are no requests in the queue that match
the request list.
The cancel command kills an active daemon, if necessary, before removing any spooling files. If
a daemon is killed, a new one is automatically restarted upon completion of file removals.
You cannot use cancel to remove another user’s job unless you have superuser privileges.
cancel can remove only jobs in the READY or HOLD state (see the reference page for the lpstat
command). When a job request is under the control of another process, such as a PRINT process,
cancel has no effect.
Environment Variables
LANG Provides a default value for the internationalization variables that are unset
or null. If the LANG variable is unset or null, the corresponding value from
the implementation-specific default locale is used. If any of the internationalization variables contain an invalid setting, the cancel command behaves
as if none of the variables have been defined.
LC_ALL
When set with a nonempty string, overrides the values of all other internationalization variables.
LC_CTYPE
Determines the locale for the interpretation of sequences of bytes of text data
as characters (for example, single-byte as opposed to multibyte characters in
arguments and input files).
LC_MESSAGES
Determines the locale to be used to affect the format and contents of diagnostic messages written to the standard error file and informative messages written to the standard output file.
NLSPATH
Determines the location of message catalogs for processing the
LC_MESSAGES variable.
527188-024
Hewlett Packard Enterprise
2−73
cancel(1)
OSS Shell and Utilities Reference Manual
EXAMPLES
1.
To remove a job whose request ID is 123 in the default print queue, enter:
cancel 123
2.
To remove a job whose request ID is 123 in the print queue for printer1, enter:
cancel 123 -Pprinter1
NOTES
Because race conditions are possible in the update of the lock file, the currently active request
may be incorrectly identified.
EXIT VALUES
The following exit values are returned by the cancel command:
0
Completion was successful.
&gt;0
An error occurred.
RELATED INFORMATION
Commands: lp(1), lpstat(1).
2−74
Hewlett Packard Enterprise
527188-024
User Commands (c)
cat(1)
NAME
cat - Concatenates or displays files
SYNOPSIS
cat [-benrstuv] [- | file] ...
The cat command reads each specified file in sequence and writes it to standard output.
FLAGS
-b
Omits line numbers from blank lines when -n is specified. If you specify the
-b flag, the -n flag is automatically invoked with it.
-e
Same as the -v flag with a $ (dollar sign) character displayed at the end of
each line.
-n
Displays output lines preceded by line numbers, numbered sequentially from
1.
-r
Replaces multiple consecutive empty lines with one empty line, so there is
never more than one empty line between lines containing characters.
-s
Does not display a message if cat cannot find an input file. (Silent option.)
-t
Same as the -v flag, with the tab character printed as &lt;Ctrl-i&gt; (ˆI).
-u
Does not buffer output. Writes bytes from the input file to standard output
without delay as each is read.
-v
Displays nonprinting characters so they are visible.
DESCRIPTION
The cat command is frequently used with &gt; (redirection symbol) to concatenate the specified
files and write them to the specified destination. (See CAUTIONS.) cat is also used with &gt;&gt; to
append a file to another file.
If you do not specify a file or if you specify - (dash) instead of file, cat reads from standard input.
The cat command accepts multiple occurrences of - (dash) as a file argument.
EXAMPLES
1.
To display the file notes, enter:
cat notes
If the file is longer than one screenful, it scrolls by too quickly to read. To
display a file one page at a time, use the more command.
2.
To concatenate several files, enter:
cat section1.1 section1.2 section1.3 &gt; section1
This creates a file named section1 that is a copy of section1.1 followed by section1.2 and section1.3.
3.
To suppress error messages about files that do not exist, enter:
cat -s section2.1 section2.2 section2.3 &gt; section2
If section2.1 does not exist, this command concatenates section2.2 and section2.3. Note that the message goes to standard error, so it does not appear in
the output file. The result is the same if you do not use the -s flag except that
cat displays the error message:
cat: cannot open section2.1
527188-024
Hewlett Packard Enterprise
2−75
cat(1)
OSS Shell and Utilities Reference Manual
You may want to suppress this message with the -s flag when you use the cat
command in shell procedures.
4.
To append one file to the end of another, enter:
cat section1.4 &gt;&gt; section1
The &gt;&gt; in this command specifies that a copy of section1.4 be added to the end
of section1. If you want to replace the file, use a single &gt; symbol.
5.
To add text to the end of a file, enter:
cat &gt;&gt; notes
Get milk on the way home
&lt;Ctrl-y&gt;
Get milk on the way home is added to the end of notes. When you use this
syntax, the cat command waits for you to enter text. Press the End-of-File key
sequence (&lt;Ctrl-y&gt; above) to indicate you are finished.
6.
To concatenate several files with text entered from the keyboard, enter:
cat section3.1 - section3.3 &gt; section3
This concatenates section3.1, text from the keyboard, and section3.3 to create
the file section3.
7.
To concatenate several files with output from another command, enter:
ls | cat section4.1 - &gt; section4
This command copies section4.1 and then the output of the ls command to the
file section4.
8.
To get two pieces of input from the terminal (when standard input is a terminal)
with a single command invocation, enter:
cat start - middle - end &gt; file1
If standard input is a regular file, however, the preceding command is
equivalent to the following:
cat start - middle /dev/null end &gt; file1
The commands are equivalent because the entire contents of the file would be
consumed by cat the first time - (dash) was used as a file argument. An Endof-File condition would then be detected immediately when - appeared the
second time.
CAUTIONS
Do not redirect output to one of the input files using the &gt; (redirection symbol). If you do this,
you lose the original data in the input file because the shell truncates it before cat can read it.
(See also the sh command.)
RELATED INFORMATION
Commands: more(1), pr(1), sh(1).
2−76
Hewlett Packard Enterprise
527188-024
User Commands (c)
cd(1)
NAME
cd - Changes the current directory
SYNOPSIS
cd argument
DESCRIPTION
The cd command changes the current directory to argument, where argument is a pathname.
If argument is a - (dash), the directory is changed to the previous directory.
The HOME shell parameter is the default argument. The PWD parameter is set to the current
directory. The CDPATH shell parameter defines the search path for the directory containing
argument.
Separate alternative directory names with a : (colon). The default path is a null string, specifying
the home directory. Note that the current directory is specified by a full pathname.
If argument begins with a / (slash), the search path is not used. Otherwise, each directory in the
path is searched for argument.
EXAMPLES
1.
The following command changes to the directory one level above the current
directory.
cd ..
2.
The following command changes to a directory named mywork that is one
level beneath the user’s home directory.
cd mywork
NOTES
The cd command is a shell built-in command. It differs from the regular commands in that it does
not open a new shell process when it executes.
A general discussion of shell built-in commands and a list of the OSS shell built-in commands
are in the reference page for sh(1).
RELATED INFORMATION
Commands: pwd(1), sh(1).
527188-024
Hewlett Packard Enterprise
2−77
chgrp(1)
OSS Shell and Utilities Reference Manual
NAME
chgrp - Changes the group ownership of a file or directory
SYNOPSIS
chgrp [ -W NOG ] [ -W NOE ] [-fhR] group file ...
The chgrp command changes the group associated with the specified file or directory to
group.
FLAGS
-f
Suppresses all error reporting.
-h
Changes the group ownership of a symbolic link, instead of the file to which
the symbolic link points. When you use this flag, the chgrp command does
not affect the file pointed to by the symbolic link. If you use the -R flag with
this flag, recursion does not take place.
-R
Causes chgrp to descend recursively through its directory arguments, setting
the specified group ID. If chgrp fails to change the group ID of a particular
file in the hierarchy, it continues to process the remaining files. If chgrp cannot read or process a directory in the hierarchy, it continues to process the
other parts of the hierarchy. When symbolic links are encountered and the -h
flag is not used, the group ownership of the parent file or directory changes,
but the group ownership of linked files or directories does not change. If you
use the -h flag with this flag, recursion does not take place.
Hewlett Packard Enterprise extensions
-W NOG
Specifies that the /G directory should be omitted when the initial directory is root and the recursive flag (-R) is used. This flag is ignored
when the initial directory is not /, /E, or /E/system or when recursion
does not occur.
-W NOE
Specifies that the /E directory should be omitted when the initial directory is root and the recursive flag (-R) is used. This flag is ignored
when the initial directory is not root or when recursion does not occur.
Specify both the -W NOG and -W NOE flags to omit both the /G and /E directories.
DESCRIPTION
The effective user of the process must match the owner of the file.
Users can change the group of a file to a group that they belong to (their effective group or one of
their supplementary groups). If you do not own the file and do not belong to the new group, you
must have superuser authority to change the group name or group ID.
The group argument must be either a valid group name or a valid group ID that exists in the
group database. If a numeric group operand exists in the group database as a group name, the
group ID number associated with that group name is used as the group ID.
Access Control Lists (ACLs)
A user can allow or deny specific individuals and groups access to a file by using the access control list (ACL) for the file. When using the chgrp( ) function in conjunction with ACLs, if the
new owner and/or group of a file have optional ACL entries corresponding to user:uid:perm or
group:gid:perm in the ACL for a file, those entries remain in the ACL but no longer have any
effect because they are superseded by the user::perm or group::perm entries in the ACL.
Access control lists (ACLs) are not supported for symbolic links.
2−78
Hewlett Packard Enterprise
527188-024
User Commands (c)
chgrp(1)
For more information about ACLs, see the acl(5) reference page.
Environment Variables
The following environment variables affect the execution of the chgrp command:
UTILSGE
Specifies that Hewlett Packard Enterprise extensions to the root directory should be omitted when the initial directory is root and a recursive
operation occurs in an OSS shell command. Application programs that
test this variable might also honor its settings.
The UTILSGE value can be any of the following:
NOE
Omit the /E directory.
NOG
Omit the /G directory.
NOG:NOE
Omit both the /G and /E directories.
The effect of assigning a value to the UTILSGE environment variable
is the same as specifying the -W NOG or -W NOE flag in the command.
EXAMPLES
1.
To change the group ownership of the file or directory named proposals to
staff, enter:
chgrp staff proposals
The group access permissions for proposals now apply to staff. See the
chmod(1) reference page for details.
2.
To recursively change the group ownership of all OSS files on the local node to
the SUPER group, enter:
chgrp -W NOG -W NOE -R SUPER /
NOTES
Because /G and /E both appear in your local root directory, you should be very careful when
using OSS shell commands on or from the root directory. OSS shell commands that perform
recursive actions make no distinction between Guardian and OSS files or between local and
remote files. You can use the -W NOE and -W NOG flags or the UTILSGE environment variable to exclude objects in the Guardian file system or objects accessible through the Expand product.
RELATED INFORMATION
Commands: chmod(1), chown(1), ls(1).
Functions: chmod(2), chown(2).
STANDARDS CONFORMANCE
The -W NOE and -W NOG flags and the UTILSGE environment variable are Hewlett Packard
Enterprise extensions to the XPG4 Version 2 specification.
527188-024
Hewlett Packard Enterprise
2−79
chmod(1)
OSS Shell and Utilities Reference Manual
NAME
chmod - Changes permissions and other file mode settings
SYNOPSIS
chmod [-fR] absolute_mode file ...
chmod [ -W NOG ] [ -W NOE ] [-fhR] [who] +permission ... | -permission ... | =permission ... file ...
FLAGS
-f
Does not report an error if the chmod command fails to change the mode on
a file.
-h
Changes the mode of a symbolic link, instead of the file to which the symbolic link points. When you use this flag, the chmod command does not
affect the file pointed to by the symbolic link. If the symbolic link refers to a
directory and the both the -R and -h flags are used, the ownership of the symbolic link is changed, but ownership of the directory to which the symbolic
link refers remains unchanged and recursion into that directory does not
occur.
-R
Causes chmod to descend recursively through its directory arguments, setting the mode for each file as described in Symbolic Mode and Absolute
Mode in the DESCRIPTION section. If chmod is unable to change the
mode of a particular file, or unable to read or search a particular directory, it
continues processing through the hierarchy. When the chmod command
encounters a symbolic link:
•
If the symbolic link refers to a file, the owner of the file is changed.
•
If the symbolic link refers to a directory, the owner of the directory is
changed, but recursion into the directory does not occur.
•
If the symbolic link refers to a directory and the both the -R and -h
flags are used, the ownership of the symbolic link is changed, but
ownership of the directory to which the symbolic link refers remains
unchanged and recursion into that directory does not occur.
Hewlett Packard Enterprise extensions
-W NOG
Specifies that the /G directory should be omitted when the initial directory is root and the recursive flag (-R) is used. This flag is ignored
when the initial directory is not /, /E, or /E/system or when recursion
does not occur.
-W NOE
Specifies that the /E directory should be omitted when the initial directory is root and the recursive flag (-R) is used. This flag is ignored
when the initial directory is not root or when recursion does not occur.
Specify both the -W NOG and -W NOE flags to omit both the /G and /E directories.
DESCRIPTION
You can use either symbolic mode or absolute mode to specify the desired permission settings.
Symbolic mode is more portable but does not offer all of the options of absolute mode.
To change the file access permissions of a file or directory, the effective user ID of the process
must match the super ID or the owner of the file, or the effective user ID of the process or one of
its group affiliations must qualify it for membership in the Safeguard SECURITY-OSS-
2−80
Hewlett Packard Enterprise
527188-024
User Commands (c)
chmod(1)
ADMINISTRATOR group.
If chmod is invoked by a process whose effective user ID does not equal the super ID or file
owner, the set-user-ID and set-group-ID bits of the file mode (04000 and 02000, respectively) are
cleared.
Access Control Lists (ACLs)
When you execute the chmod command, you can change the effective permissions granted by
optional entries in the ACL for a file. In particular, using the chmod command to remove read,
write, and execute permissions from a file owner, owning group, and all others works as
expected, because the chmod command affects the class entry in the ACL, limiting any access
that can be granted to additional users or groups through optional ACL entries. To verify the
effect, use getacl command on the file after the chmod command completes and note that all
optional (nondefault) ACL entries with nonzero permissions also have the comment
# effective:---.
To set the permission bits of access control list entries, use the setacl command instead of the
chmod command.
ACLs are not supported for symbolic links.
Symbolic Mode
Symbolic mode has the form:
[who] operation permission[, operation permission ...]
The who argument specifies whether you are defining permissions for a user, group, or all others,
or any combination of these. The operation argument specifies whether the permission is being
added, removed, or assigned absolutely. The permission argument identifies the operation that
the specified users can perform on file.
Valid options for the who argument are as follows:
a
User, group, and all others (same effect as the combination ugo)
g
Group
o
All others
u
User (owner)
If the who argument is omitted, the default value is a, but the setting of the file creation
mask, umask (see the reference page for sh(1)), is applied.
Valid options for the operation argument are as follows:
-
Removes specified permissions.
+
Adds specified permissions.
=
Clears the selected permission field and sets it to the specified code. If you
do not specify a permission code following =, the chmod command removes
all permissions from the selected field.
Valid options for the permission argument are as follows:
527188-024
r
Read permission.
w
Write permission.
Hewlett Packard Enterprise
2−81
chmod(1)
OSS Shell and Utilities Reference Manual
x
Execute permission for files, search permission for directories.
X
Execute permission only if file is a directory or if at least one execute bit
(S_IXUSR, S_IXGRP, or S_IXOTH) is set.
s
Set-user-ID or set-group-ID permission.
This permission bit sets the effective user ID or group ID to that of the owner
or group owner of file whenever the file is run. Use this permission setting
with the u or g option to allow temporary or restricted access to files not normally accessible to other users. An s appears in the user or group execute
position of a long listing (see the reference page for the ls command) to show
that the file runs with set-user-ID or set-group-ID permission.
Note that the command chmod o+s has no effect (the set-user-ID-onexecution and set-group-ID-on-execution bits are not modified).
t
Save text permission.
In some versions of the UNIX system, setting this permission bit causes the
text segment of a program to remain in virtual memory after its first use.
Such systems therefore do not transfer the program code of frequently
accessed programs into the paging area.
You can specify this permission for OSS files, but it has no effect. The letter
t appears in the execute position of the all others option to indicate that the
file has this bit (the sticky bit) set.
If a directory has this bit set, then deletion in it is restricted. An entry in a
sticky directory can be removed or renamed by a user only if the user has
write permission for the directory and the user is the owner of the file, the
owner of the directory, or has appropriate permissions.
The u, g, and o options indicate that permission is to be taken from the current mode.
Omitting permission is useful only with = to remove all permissions. For example,
entering the following command clears all permission fields for the user and resets
them all to those of the group for file1:
u=g file1
All permission bits not explicitly specified are cleared.
You can specify multiple symbolic modes, separated with commas. Do not separate
items in this list with spaces. Operations are performed in the order they appear from
left to right.
Absolute Mode
Absolute mode lets you use octal notation to set each bit in the permission code. The chmod
command sets the permissions to the permission_code you provide. permission_code is constructed by combining with logical OR the following values:
01000000
Sets the trust bit for a TNS/X or TNS/E native loadfile regardless of whether
an I/O buffer is in a shared memory segment (the S_TRUSTSHARED bit).
On a server running an H-series RVU, only a user with appropriate privileges
(the super ID) can use this setting. This bit is ignored on a server running a
G-series RVU.
2−82
Hewlett Packard Enterprise
527188-024
User Commands (c)
chmod(1)
00400000
Sets the trust bit for a TNS/X or TNS/E native load file for cases where an
I/O buffer is not in a shared memory segment (the S_TRUST bit). On a
server running an H-series RVU, only a user with appropriate privileges (the
super ID) can use this setting. This bit is ignored on a server running a Gseries RVU.
00004000
Sets user ID on execution (the S_ISUID bit).
00002000
Sets group ID on execution (the S_ISGID bit).
00001000
Sets sticky bit:
•
Retains memory image after execution (executable file).
•
Restricts file removal (directory).
00000400
Permits read by owner (the S_IRUSR bit).
00000200
Permits write by owner (the S_IWUSR bit).
00000100
Permits execute or search by owner (the S_IXUSR bit).
00000040
Permits read by group (the S_IRGRP bit).
00000020
Permits write by group (the S_IWGRP bit).
00000010
Permits execute or search by group (the S_IXGRP bit).
00000004
Permits read by others (the S_IROTH bit).
00000002
Permits write by others (the S_IWOTH bit).
00000001
Permits execute or search by others (the S_IXOTH bit).
Use on Guardian Objects
The chmod command does not work on files in the /G directory. Once a file has been created in
/G, you cannot change its permissions with the chmod command.
To avoid errors when using the chmod command from the root directory (/), use the -W NOG
flag to prevent an attempt to access files in /G.
527188-024
Hewlett Packard Enterprise
2−83
chmod(1)
OSS Shell and Utilities Reference Manual
Environment Variables
The following environment variables affect the execution of the chmod command:
UTILSGE
Specifies that Hewlett Packard Enterprise extensions to the root directory should be omitted when the initial directory is root and a recursive
operation occurs in an OSS shell command. Application programs that
test this variable might also honor its settings.
The UTILSGE value can be any of the following:
NOE
Omit the /E directory.
NOG
Omit the /G directory.
NOG:NOE
Omit both the /G and /E directories.
The effect of assigning a value to the UTILSGE environment variable
is the same as specifying the -W NOG or -W NOE flag in the command.
EXAMPLES
1.
To add a type of permission to several files, enter:
chmod g+w chap1 chap2
This command adds write permission for group members to the files chap1 and
chap2.
2.
To make several permission changes at once, enter:
chmod go-w+x mydir
This command denies group members and others the permission to create or
delete files in the directory mydir (go-w) and allows them to search mydir or
use it in a pathname (go+x). This command is equivalent to the following
command sequence:
chmod
chmod
chmod
chmod
3.
g-w
o-w
g+x
o+x
mydir
mydir
mydir
mydir
To permit only the owner to use a shell procedure as a command, enter:
chmod u=rwx,go= cmd
This command gives read, write, and execute permission to the user who owns
the file (u=rwx). It also denies the group and others the permission to access
cmd in any way (go=).
4.
To use set-ID modes, enter:
chmod ug+s cmd
When the file cmd is executed, this command causes the effective user and
group IDs to be set to those that own the file cmd. Only the effective IDs associated with the subprocess that runs cmd are changed. The effective IDs of the
shell session remain unchanged.
This feature allows you to permit restricted access to important files. Suppose
the file cmd has the set-user-ID mode enabled and is owned by a user called
2−84
Hewlett Packard Enterprise
527188-024
User Commands (c)
chmod(1)
dbms. dbms is not actually a person but might be associated with a database
management system. The user betty does not have permission to access any of
dbms’s data files. However, she does have permission to execute cmd. When
she does so, her effective user ID is temporarily changed to dbms, so that the
cmd program can access the data files owned by dbms.
This way betty can use cmd to access the data files, but she cannot accidentally damage them with the standard shell commands.
5.
To use the absolute mode form of the chmod command, enter:
chmod 644 text
This command sets read and write permission for the owner, and it sets readonly mode for the group and all others.
NOTES
Because /G and /E both appear in your local root directory, you should be very careful when
using OSS shell commands on or from the root directory. OSS shell commands that perform
recursive actions make no distinction between Guardian and OSS files or between local and
remote files. You can use the -W NOG and -W NOE flags or the UTILSGE environment variable to exclude objects in the Guardian file system or objects accessible through the Expand product.
RELATED INFORMATION
Commands: chgrp(1), chown(1), getacl(1), ls(1), setacl(1), sh(1).
Miscellaneous topics: acl(5).
STANDARDS CONFORMANCE
Hewlett Packard Enterprise extensions to the XPG4 Version 2 specification are:
527188-024
•
To change the file access permissions of a file or directory, the effective user
ID of the process must match the super ID or the owner of the file, or the
effective user ID or one of the group affiliations for the process must qualify
the process for membership in the Safeguard SECURITY-OSSADMINISTRATOR group.
•
The -W NOG and -W NOE flags and the UTILSGE environment variable are
used.
Hewlett Packard Enterprise
2−85
chown(1)
OSS Shell and Utilities Reference Manual
NAME
chown - Changes the owner of files or directories
SYNOPSIS
chown [ -W NOG ] [ -W NOE ] [-fhR] owner[:group] file ...
FLAGS
-f
Turns off error reporting.
-h
Changes the ownership of a symbolic link instead of the file to which
the symbolic link points. When you use this flag, the chown command
does not affect the file pointed to by the symbolic link. If the symbolic
link refers to a directory and the both the -R and -h flags are used, the
ownership of the symbolic link is changed, but ownership of the directory to which the symbolic link refers remains unchanged and recursion into that directory does not occur.
-R
Causes chown to descend recursively through its directory arguments,
setting the specified owner (and group, if specified). If chown fails to
change the owner or group of a particular file, or cannot read or search
a particular directory, it continues processing through the hierarchy.
When the chmod command encounters a symbolic link:
•
If the symbolic link refers to a file, the owner of the file is
changed.
•
If the symbolic link refers to a directory, the owner of the
directory is changed, but recursion into the directory does not
occur.
•
If the symbolic link refers to a directory and the -h option is
used, the ownership of the symbolic link is changed, but ownership of the directory to which the symbolic link refers
remains unchanged and recursion into the directory does not
occur.
Hewlett Packard Enterprise extensions
-W NOG
Specifies that the /G directory should be omitted when the initial directory is root and the recursive flag (-R) is used. This flag is ignored
when the initial directory is not /, /E, or /E/system or when recursion
does not occur.
-W NOE
Specifies that the /E directory should be omitted when the initial directory is root and the recursive flag (-R) is used. This flag is ignored
when the initial directory is not root or when recursion does not occur.
Specify both the -W NOG and -W NOE flags to omit both the /G and /E directories.
DESCRIPTION
The chown command changes the owner of the specified files or directories to the specified username or user ID.
A user with super ID priviledges can use the chown command to change the owner of a file.
The owner argument must be a valid username or a valid numerical user ID. The optional group
argument must be a valid group name or a valid numerical group ID. Only a process running
with an effective user ID equal to the super ID or with a user ID or group affiliation qualifying for
2−86
Hewlett Packard Enterprise
527188-024
User Commands (c)
chown(1)
membership in the Safeguard SECURITY-OSS-ADMINISTRATOR group can use the chown
command to change the owner of a file.
Only a process that has an effective user ID equal to the super ID or to the file owner, or that has
an effective user ID or group affiliation qualifying for membership in the Safeguard
SECURITY-OSS-ADMINISTRATOR group can use the chown command to change the group
of a file. However, processes that have an effective user ID equal to the file owner can only
change the group of a file to a group to which they belong (their effective group or one of their
supplementary groups).
If the chown command is invoked by a process whose effective user ID does not equal the super
ID, the set-user-ID and set-group-ID bits of the file mode (04000 and 02000, respectively) are
cleared.
Access Control Lists (ACLs)
A user can use the ACL for a file to allow or deny specific individuals and groups access to a file.
When you use the chown( ) function with ACLs, if the new owner and/or group of a file have
optional ACL entries corresponding to user:uid:perm or group:gid:perm in the ACL for a file,
those entries remain in the ACL but no longer have any effect because they are superseded by the
user::perm or group::perm entries in the ACL.
ACLs are not supported for symbolic links.
For more information about ACLs, see the acl(5) reference page.
Environment Variables
The following environment variables affect the execution of the chown command:
UTILSGE
Specifies that Hewlett Packard Enterprise extensions to the root directory should be omitted when the initial directory is root and a recursive
operation occurs in an OSS shell command. Application programs that
test this variable might also honor its settings.
The UTILSGE value can be any of the following:
NOE
Omit the /E directory.
NOG
Omit the /G directory.
NOG:NOE
Omit both the /G and /E directories.
The effect of assigning a value to the UTILSGE environment variable
is the same as specifying the -W NOG or -W NOE flag in the command.
EXAMPLES
1.
To change the owner of the file program.c, to steffan enter:
chown steffan program.c
The user access permissions for program.c now apply to steffan. As the
owner, steffan can use the chmod command to permit or deny the other users
access to program.c. (See the chmod(1) reference page for details.)
2.
To recursively change the owner of all OSS files on the local node to the username GROUP1.USER1 without affecting local Guardian files, enter:
chown -W NOG -W NOE -R GROUP1.USER1 /
or
527188-024
Hewlett Packard Enterprise
2−87
chown(1)
OSS Shell and Utilities Reference Manual
export UTILSGE=NOG:NOE
chown -R GROUP1.USER1 /
NOTES
Because /G and /E both appear in your local root directory, you should be very careful when
using OSS shell commands on or from the root directory. OSS shell commands that perform
recursive actions make no distinction between Guardian and OSS files or between local and
remote files. You can use the -W NOG and -W NOE flags or the UTILSGE environment variable to exclude objects in the Guardian file system or objects accessible through the Expand product.
RELATED INFORMATION
Commands: chgrp(1), chmod(1), ls(1).
Functions: chmod(2), setacl(2).
Miscellaneous topics: acl(5).
STANDARDS CONFORMANCE
Hewlett Packard Enterprise extensions to the XPG4 Version 2 specification are:
2−88
•
To change the file access permissions of a file or directory, the effective user
ID of the process must match the super ID or the owner of the file, or the
effective user ID or one of the group affiliations for the process must qualify
the process for membership in the Safeguard SECURITY-OSSADMINISTRATOR group.
•
The -W NOG and -W NOE flags and the UTILSGE environment variable are
used.
Hewlett Packard Enterprise
527188-024
User Commands (c)
cksum(1)
NAME
cksum - Displays the checksum and byte count of a file
SYNOPSIS
cksum [file ...]
DESCRIPTION
The cksum command reads the files specified by the file argument and calculates a 32-bit checksum Cyclic Redundancy Check (CRC) and the byte count for each file. If no files are specified,
the standard input file is read. The checksum, number of bytes, and filename are written to the
standard output file. If standard input is used, no pathname is printed.
The cksum command can be used to compare a suspect file copied or communicated over noisy
transmission lines against an exact copy of a trusted file. The comparison made by the cksum
command may not be cryptographically secure; however, it is unlikely that an accidentally damaged file will produce the same checksum as the original file.
The checksum of a program can change. The first time a program is executed after the system is
cold loaded, external references are resolved. This changes the contents of the program file and
hence its contents.
The cksum command uses a different algorithm than the sum command to calculate the 32-bit
checksum CRC. The cksum command uses a CRC algorithm based on the Ethernet standard
frame check. In addition, the sum block count is an octet count in cksum.
The CRC checksum is obtained in the following way:
The encoding is defined by the generating polynomial:
32
26
23
22
16
12
11
10
8
7
5
4
2
G(x) = x + x + x + x + x + x + x + x + x + x + x + x + x + x + 1
Mathematically, the CRC value corresponding to a given file is defined by the following procedure:
1.
The n bits to be evaluated are considered to be the coefficients of a mod 2 polynomial M(x) of degree n-1. These n bits are the bits from the file, with the most
significant bit being the most significant bit of the first octet of the file and the
last bit being the least significant bit of the last octet, padded with zero bits (if
necessary) to achieve an integral number of octets, followed by one or more
octets representing the length of the file as a binary value, least significant
octet first. The smallest number of octets capable of representing this integer is
used.
2.
M(x) is multiplied by x (that is, shifted left 32 bits) and divided by G(x) using
mod 2 division, producing a remainder R(x) of degree less than or equal to 31.
3.
The coefficients of R(x) are considered to be a 32-bit sequence.
4.
The bit sequence is complemented and the result is the CRC.
32
EXAMPLES
To display the checksum and the size, in bytes, of file1 and file2, enter:
cksum file1 file2
3995432187
3266927833
1390
20912
file1
file2
This output shows that the checksum of the file1 file is 3995432187 and it contains 1390 bytes,
and that the checksum of the file2 file is 3266927833 and it contains 20912 bytes.
527188-024
Hewlett Packard Enterprise
2−89
cksum(1)
OSS Shell and Utilities Reference Manual
RELATED INFORMATION
Commands: wc(1).
2−90
Hewlett Packard Enterprise
527188-024
User Commands (c)
clear(1)
NAME
clear - Clears terminal screen
SYNOPSIS
clear
DESCRIPTION
The clear command clears your terminal screen, if possible. It checks the ENV file for the terminal type and then uses the termcap database to determine how to perform this operation.
FILES
/etc/termcap
RELATED INFORMATION
Files: termcap(4).
527188-024
Hewlett Packard Enterprise
2−91
cmp(1)
OSS Shell and Utilities Reference Manual
NAME
cmp - Compares two files
SYNOPSIS
cmp [-l | -s] file1 file2
The cmp command compares two files.
FLAGS
-l
Prints the byte number (in decimal) and the differing bytes (in octal) for each
difference.
-s
Does not print data for differing files; returns only an exit value.
DESCRIPTION
If the file1 or file2 argument is specified as a - (dash), the standard input file is used. By default,
the cmp command prints no information if the files are the same. If the files differ, cmp prints
the byte and line number where the difference occurred. The cmp command also specifies
whether one file is an initial subsequence of the other (that is, if the cmp command reads an
End-of-File character in one file before finding any differences). Normally, you use the cmp
command to compare nontext files and the diff command to compare text files.
Note that bytes and lines reported by cmp are numbered from 1. The first differing byte number
is from file1, and the second is from file2.
EXAMPLES
1.
To determine whether two files are identical, enter:
cmp prog.o.bak prog.o
The preceding command compares the files prog.o.bak and prog.o. If the files
are identical, a message is not displayed. If the files differ, the location of the
first difference is displayed as follows:
prog.o.bak prog.o differ: char 5, line 1
If the message cmp: EOF on prog.o.bak is displayed, the first part of
prog.o is identical to prog.o.bak, but there is additional data in prog.o. If the
message cmp: EOF on prog.o is displayed, prog.o.bak that is identical to
prog.o but that also contains additional data.
2.
To display each pair of bytes that differ, enter:
cmp -l prog.o.bak prog.o
This command compares the files and then displays the byte number (in
decimal) and the differing bytes (in octal) for each difference. For example, if
the fifth byte is octal 101 in file prog.o.bak and 141 in file prog.o, then the
cmp command displays:
5 101 141
.
.
EXIT VALUES
Exit value 0 (zero) is returned for identical files, 1 for differing files, and 2 for an inaccessible
file, a missing argument, or some other error.
RELATED INFORMATION
Commands: comm(1), diff(1).
2−92
Hewlett Packard Enterprise
527188-024
User Commands (c)
cobol(1)
NAME
cobol - Compiles COBOL85 TNS programs
SYNOPSIS
cobol [-c ] [-g ] [ -L directory ] ... [-O[optlevel ] ]
[-o outfile ] [ -s ]
[-Waxcel[=&quot;args&quot; ] ]
[-WBdynamic ]
[-WBstatic ]
[-Wbind[=&quot;args&quot; ] ]
[-Wcobol=&quot;args&quot; ]
[-Wcopylib=pathname ]
[-Wnobind ]
[-Wrunlib=pathname ]
[-Wsql[=&quot;args&quot; ] ]
[-Wverbose ]
operand ...
FLAGS
-c
Performs compilation of the specified source files but supresses the binding
phase. This flag does not delete any object files that are produced.
-g
Produces symbols information for symbolic debugging in the object or executable files. This is equivalent to specifying the SYMBOLS and INSPECT
directives to the COBOL85 compiler.
-L directory
Changes the algorithm for searching the libraries named in the -l arguments
to look in the directory named by the directory pathname before looking in
the default directories /lib, /nonnative/usr/lib, /usr/lib, and /usr/local/lib.
Directories named in -L options are searched in the order specified. At least
ten instances of this option are supported in a single cobol command line. If
a directory specified by -L contains files named libc.a, libm.a, libl.a, or
liby.a, these files are used as libraries instead of the libraries in the default
directories.
-o outfile Uses the pathname outfile instead of the default pathname a.out for the executable file produced. If -o is used with the -c flag, outfile is used to name the
object file instead of the standard naming convention.
-O [optlevel]
Specifies the optimization level to be used for the program file. A 0 optlevel
argument specifies an OPTIMIZE 0 COBOL85 compiler directive. A 1
optlevel argument specifies an OPTIMIZE 1 COBOL85 compiler directive.
A 2 optlevel argument or no argument specifies an OPTIMIZE 2 COBOL85
compiler directive and processes the program file with the Accelerator,
axcel. If a -O flag is not specified, an OPTIMIZE 1 COBOL85 compiler
directive is specified.
-s
527188-024
Strips symbolic and other information not required for proper execution from
object and executable files. If both the -g and -s flags are used, symbolic
information is kept in the object files but is stripped from the executable file.
Do not specify the -s and
-Wsql flags in the same cobol invocation because the NonStop SQL/MP
compiler requires the symbols region to be present. Strip the file in a
separate cobol invocation after the SQL compilation.
Hewlett Packard Enterprise
2−93
cobol(1)
OSS Shell and Utilities Reference Manual
-Waxcel[=&quot;args&quot;]
Invokes the Accelerator, axcel, and passes to it the argument string enclosed
in quotation marks. Refer to the Accelerator Manual for a description of the
arguments that can be passed to the Accelerator.
-WBdynamic
Specifies that dynamic binding is performed. In dynamic binding, the Binder
resolves references to library functions using a shared runtime library, such
as lib.so, but does not bind the functions into the program. Final resolution
of references is performed at run time. Dynamic binding is the default
action.
-WBstatic
Specifies that static binding is performed. In static binding, the Binder
resolves references to library functions using a user library, such as libc.a,
and binds the functions into the program. Dynamic binding is the default
action.
-Wbind[=&quot;args&quot;]
Invokes the Binder and passes to it the argument string enclosed in quotation
marks. Dynamic binding is the default action. Refer to the Binder Manual
for a description of the arguments that can be passed to the Binder.
-Wcobol=&quot;args&quot;
Passes to the COBOL85 compiler the directives in the argument string
enclosed in quotation marks. This string follows any directives generated by
other flags.
-Wcopylib=pathname
Specifies pathname as the source file to use as the default COPY library for
any COPY statement in the source program that does not specify a library.
-Wnobind
Suppresses invocation of the Binder. This flag is used when the Accelerator
or NonStop SQL/MP compiler is to be invoked without having to rebind the
program file.
-Wrunlib = pathname
Specifies a user library to be used at run time. The user library must be
specified as a member of the Guardian file system in an OSS pathname of the
form /G/volume/subvolume/file-identifier.
-Wsql[=&quot;args&quot;]
Invokes the NonStop SQL/MP compiler, sqlcomp, and passes to it the argument string enclosed in quotation marks. Refer to the NonStop SQL/MP Programming Manual for COBOL85 for a description of the arguments that can
be passed to the NonStop SQL/MP compiler. Do not specify the -s and Wsql flags in the same cobol invocation because the NonStop SQL/MP compiler requires the symbols region to be present. Strip the file in a separate
cobol invocation after the SQL compilation.
-Wverbose
Displays more detailed information during the program generation process
from the COBOL85 compiler, Binder, Accelerator, or NonStop SQL/MP
compiler.
2−94
Hewlett Packard Enterprise
527188-024
User Commands (c)
cobol(1)
Multiple instances of the -L and -l flags can be specified.
Do not include a space before or after the &quot;=&quot; (equal sign).
The position of -l library arguments within a list of flags affects the order in which
libraries are searched.
The order of specifying the -l and -L flags is significant.
DESCRIPTION
The cobol utility is the interface to the COBOL85 compilation system; it accepts source code
conforming to the ISO COBOL85 standard. The system conceptually consists of a COBOL85
compiler and Binder, with additional program components supporting NonStop SQL/MP compilation (sqlcomp), and object code acceleration (axcel). The files specified in the operand list are
operated on by the appropriate program components of the compilation system, depending on the
command line flags and the type of file operands.
If the -c flag is specified, for all pathname operands of the form file.cbl, the files $(basename
pathname.c).o are created as the result of successful compilation.
If -c is not specified, the object files created after successful compilation are combined into a program file by the bind operation. Object files created are not deleted after successful generation of
the executable program file.
If no flags are present to prevent program binding (such as -c or -Wnobind, and if all file
operands compile and link without error, the resulting executable file is written according to the
-o outfile flag (if present) or to the file a.out.
The executable file is created according to OSS file creation rules, except that the file permissions are set to S_IRWXO | S_IRWXG | S_IRWXU and the bits specified by the umask of the
process are cleared.
Hewlett Packard Enterprise extensions
The -W flags are specific to Hewlett Packard Enterprise to support the hewlett Packard Enterprise compilation environment. The argument strings following these flags are passed to the program components unchanged, along with default argument strings and argument strings
corresponding to cobol command line flags meaningful to the program components. Do not
specify conflicting instructions in -W flag argument strings or cobol command line flags. The
results of conflicting instructions are undefined.
Operands
An operand is either a pathname or in the form -l library. At least one operand of the pathname
form must be specified. The following operands are supported:
file.cbl
A COBOL85 language source file to be compiled and optionally linked.
file.cob A COBOL85 language source file to be compiled and optionally linked.
527188-024
file.a
A library of object files typically produced by the ar command, and passed
directly to the Binder.
file.o
An object file produced by the command cobol -c and passed directly to the
Binder.
file.so
A shared runtime library produced by the Binder. The shared runtime library
is used by the Binder to resolve external references.
Hewlett Packard Enterprise
2−95
cobol(1)
OSS Shell and Utilities Reference Manual
-l library In the static binding mode, search for the library named liblibrary.a. In the
dynamic binding mode, search for the library named liblibrary.so. If
liblibrary.so is not found, liblibrary.a is used.
A library is searched when its name is encountered, so the placement of -l is
significant.
Input Files
Input files are one of the following:
•
A text file containing a COBOL85 language source program
•
An object file in the format produced by the command cobol -c
•
A library of object files in the format produced by archiving zero or more
object files using the ar command
•
A library of object files produced by the Binder
•
An executable file produced by the Binder
Output Files
Output files are object files or executable files (or both).
Standard Output
The standard output is a text file that contains the compiler listing, if generated.
Standard Error
Standard error is used for diagnostic and informational messages. If more than one file operand
is specified, for each such file, &quot;%s: \n&quot;,&lt;file&gt; might be written. These messages precede
the processing of each input file.
Environment Variables
The environment variables listed below affect the execution of cobol. The cobol utility and its
program components do not support locale variables.
AXCEL Determines the pathname of the Accelerator invoked by cobol. By default,
the program axcel in the directory /G/system/system is used.
BIND
Determines the pathname of the Binder invoked by cobol. By default, the
program bind in the directory /G/system/system is used.
SQLCOMP
Determines the pathname of the NonStop SQL/MP compiler invoked by
cobol. By default, the program sqlcomp in the directory /G/system/system
is used.
Operations
cobol is the driver program of the COBOL85 language compilation system. It accepts COBOL85
source files and generates binary files executable in the OSS environment. Depending on userspecified flags, input file operands, and completion code at each stage, cobol invokes one or more
components of the compilation system. A program-generation process can involve the following
steps:
1.
2−96
Each COBOL85 source module is compiled into an object module by the
COBOL85 compiler.
Hewlett Packard Enterprise
527188-024
User Commands (c)
cobol(1)
2.
Object modules are bound together, with additional library routines if necessary, by the Binder into a single program file, unless flag -c or -Wnobind is
specified. In this case, processing stops after compilation of source modules.
3.
If the program is to be run on TNS/R systems, the user can accelerate the program with the Accelerator to obtain maximum performance.
4.
If the program contains embedded SQL statements, it needs to be compiled by
the NonStop SQL/MP compiler as the final step.
With the exception of the cobol utility, all components are invoked as Guardian
processes. cobol provides terminal emulation (input from and output to) the controlling terminal for these processes, if necessary. For Guardian processes that do not use
cobol for terminal emulation or are not interactive, the stop/continue type of OSS job
control is not supported.
The Binder is invoked with a command file containing the following commands:
MODE NOUPSHIFT
SELECT CHECK PARAMETER STRONG
SELECT FILESYS OSS
SET SYSTYPE OSS
ADD * FROM &lt;object created by COBOL85 compiler or input object
file&gt;
SELECT SEARCH &lt;library specified by -l flag&gt;
SELECT IMPORT LIBRARY &lt;shared runtime library if found in
dynamic binding mode&gt;
SET HIGHPIN ON
SET HIGHREQUESTERS ON
SELECT LIST * OFF
SELECT RUNNABLE OBJECT ON
&lt;SET INSPECT ON if -g flag&gt;
SET SAVEABEND ON
SET HEAP 32 PAGES
&lt;argument string from -Wbind options&gt;
SELECT SEARCH &lt;standard C library, libc.a or libc.so&gt;
BUILD &lt;filename from -o option or a.out&gt;!
&lt;STRIP filename if -s option&gt;
Standard Libraries
The following libraries are available for COBOL85 programs that call OSS functions.
527188-024
-l c
Contains all library functions specified in the POSIX.1 specification, except
for those functions listed as residing in the math.h header file. The presence
of this operand is not required to cause a search of this library if the target
execution environment is the OSS environment.
-l C
Contains the C++ runtime library. Bind this library before the standard C
runtime library.
-l m
Contains all functions referenced in the math.h header file.
Hewlett Packard Enterprise
2−97
cobol(1)
OSS Shell and Utilities Reference Manual
-l l
Contains all functions required by the C language output of lex utility that
are not made available through the -l c operand.
-l y
Contains all functions required by the C language output of yacc utility that
are not made available through the -l c operand.
-l gwc
Contains the C runtime library for the Guardian environment, using the wide
data-model.
In the absence of flags that inhibit invocation of the Binder, such as -c, -E, or Wnobind, cobol passes an -l c operand to the Binder as the last -l operand, causing the standard C library to be searched after all other object files and libraries are loaded.
Handling of Guardian Libraries
The cobol command tries to determine the type of a Guardian file from its content. Text input
files are assumed to be COBOL85 language source files.
The object file for a Guardian source file is named according to the following convention:
•
The object file uses the same filename with the letter &quot;o&quot; appended to the end.
For example, the object file xyzo is generated from the source file xyz.
•
If a valid filename cannot be generated using the rule above, a filename
returned from tmpnam is used, and a message informs the user of the new
filename.
Libraries residing in Guardian directories cannot be specified as -l operands because of
the naming convention. They can be specified in the desired order with -Wbind flags.
The default executable file in a Guardian file system is aout in the directory from
which cobol is invoked.
Differences Between Static and Dynamic Binding
In static binding, the Binder resolves references to library functions by binding into the program
the functions from a user library, such as libc.a. In dynamic binding, the Binder resolves references to library functions by using information found in a shared runtime library, such as libc.so.
Final resolution of references are not done until run time. Dynamic binding produces smaller
program files and uses fewer system resources than static binding. By default, cobol performs
dynamic binding.
A shared library must have a file extension of .so. Such a file can either be an actual shared
library file created by the Binder or an OSS text file containing only one line of text in the form
&quot;SRL=srlpath&quot; where srlpath is the OSS pathname of the actual shared library file.
In dynamic binding, if a library is specified by an operand of the form llibrary, cobol searches for
a file liblibrary.so in a directory in the library search paths. If the file is found in the directory,
cobol issues the Binder command SET IMPORT LIBRARY srlpath, where srlpath is the pathname of the actual shared library file. If the file is not found in the directory, cobol searches for a
file liblibrary.a in the same directory. If a file is found, cobol issues the Binder command
SELECT SEARCH libpath to perform a static binding of the library. If neither file is found, cobol
repeats the search for the library in the next directory in the library search paths.
In static binding, cobol only searches for liblibrary.a from directories in the library search paths.
Static libraries can be used for dynamic binding. The Binder resolves external references using
all the specified static libraries before using the shared runtime library. A program can only have
one shared runtime library. cobol issues warnings if more than one shared runtime library is
specified.
The standard C runtime library, libc.a or libc.so is used in dynamic binding only if no other
2−98
Hewlett Packard Enterprise
527188-024
User Commands (c)
cobol(1)
shared runtime libraries are used.
By default, the shared runtime library used during binding (the model library) is the shared runtime library used during execution (the runtime library), unless a different library is specified by
the -Wrunlib flag.
The shared runtime library must be in the Guardian file system name space. If a shared runtime
library is in the OSS file system name space, you must supply a library in the Guardian name
space either using the -Wrunlib flag during program generation or through the LIB option of the
TACL RUN command during program execution.
Refer to the Binder Manual for more details on using shared runtime libraries.
Using the c89 and cobol Utilities
OSS COBOL85 programs can contain COBOL85 modules and C modules. Compile COBOL85
modules using the cobol utility and C modules using the c89 utility. To produce a program containing COBOL85 and C modules, first compile all the modules written in either COBOL85 or C.
You can also bind these modules together or with other libraries at this time, but do not
accelerate or SQL-compile the modules. After you have compiled all the modules of one
language, compile the modules written in the other language, specifying any necessary binding,
accelerating, or SQL-compiling options.
For example, to produce an executable object file made up of COBOL85 modules cobol1.cbl
and cobol2.cbl and C modules c1.c and c2.c, you can first run the C compiler using the c89
utility with:
c89 -c -o cprog.o c1.c c2.c
This directs c89 to compile the two modules but not to bind them. The output object file is
cprog.o.
You can then invoke the cobol utility to compile the two COBOL85 modules, bind the
COBOL85 compiler output with the previously produced C object file and the standard C library,
and run the Accelerator to produce the executable object myprog with:
cobol -o myprog -O cprog.o cobol1.cbl cobol2.cbl
Refer to the C/C++ Programmer’s Guide and the Open System Services Programmer’s Guide for
details on writing and compiling C programs in the OSS environment.
EXAMPLES
1.
The command
cobol test1.cbl
compiles the source file test1.cbl and binds the object file into a program
file a.out.
2.
The command
cobol -c test1.cbl
compiles the source file test1.cbl into an object file test1.o.
3.
The command
cobol -g -o test2 x.cbl y.cbl z.cbl
compiles source files x.cbl, y.cbl, and z.cbl and binds the object files
into a program file test2. Symbolic information is generated by the compiler
and retained by the Binder for debugging.
527188-024
Hewlett Packard Enterprise
2−99
cobol(1)
OSS Shell and Utilities Reference Manual
4.
The command
cobol -o test3 -O 2 -WBstatic x1.cbl x2.o x3.cbl -l mylib
compiles source files x1.cbl and x3.cbl and binds the object files together
with x2.o into program file test3. Static binding has been specified, so the
Binder tries to resolve references using the library mylib.a before using the
standard library libc.a. The -O 2 flag causes optimization during compilation
and invocation of the Accelerator on the program file.
5.
The command
cobol -o xyz -Wbind=&quot;set heap 64&quot; -Wsql x.o y.o z.o
binds the object files x.o, y.o, and z.o into a program file xyz. The
Binder sets the heap size of the program to 64 pages. The NonStop SQL/MP
compiler, sqlcomp, is then invoked on xyz to compile xyz.
6.
The command
cobol -Wnobind -Waxcel xyz
invokes the Accelerator, axcel, on object or program file xyz without going
through the binding process.
7.
The command
cobol -Wnobind -Wsql=&quot;catalog \$abc.def&quot; xyz
invokes the NonStop SQL/MP compiler, sqlcomp, on program file xyz
without going through the binding process. In addition to the input filename
xyz, the catalog option is passed to the NonStop SQL/MP compiler.
8.
The command
cobol -o testprog -L .
-L /usr/test/lib testprog.cbl -l tdm
compiles the COBOL85 language source program testprog.cbl and binds
the object file with the library specified in the -l operand. It also binds the
object file with a shared runtime library, if found. If a shared runtime library is
not found, it uses the standard C runtime library. The Binder produces a program file named testprog. By default, dynamic linking is selected. cobol
searches for the library specified by the -l flags and the -l tdm operand in the
following order and selects the first one found:
2−100
libtdm.so
in the current directory (-L .)
libtdm.a
in the current directory (-L .)
libtdm.so
in /usr/test/lib (-L /usr/test/lib)
libtdm.a
in /usr/test/lib (-L /usr/test/lib)
libtdm.so
in /lib (by default)
libtdm.a
in /lib (by default)
libtdm.so
in /nonnative/usr/lib (by default)
libtdm.a
in /nonnative/usr/lib (by default)
libtdm.so
in /usr/lib (by default)
Hewlett Packard Enterprise
527188-024
User Commands (c)
cobol(1)
libtdm.a
in /usr/lib (by default)
libtdm.so
in /usr/local/lib (by default)
libtdm.a
in /usr/local/lib (by default)
EXIT VALUES
The following exit values are returned:
0
Successful completion.
&gt;0
An error occurred.
DIAGNOSTICS
If cobol encounters a compilation error that causes an object file to not be created, it writes a
diagnostic message to standard error and continues to compile other source code operands.
However, it does not perform program binding and returns a nonzero exit status. If the binding is
unsuccessful, cobol writes a diagnostic message to standard error and returns a nonzero exit
status.
RELATED INFORMATION
Commands: ar(1), c89(1), ecobol(1), nmcobol(1), strip(1).
STANDARDS CONFORMANCE
The -W flags are Hewlett Packard Enterprise extensions.
527188-024
Hewlett Packard Enterprise
2−101
comm(1)
OSS Shell and Utilities Reference Manual
NAME
comm - Compares two sorted files
SYNOPSIS
comm [-123] file1 file2
The comm command reads file1 and file2 and writes three columns to the standard output
file, showing which lines are common to both files and which are unique to each file.
FLAGS
-1
Suppresses output of the first column (lines only in file1).
-2
Suppresses output of the second column (lines only in file2).
-3
Suppresses output of the third column (lines common to file1 and file2).
The command comm -123 produces no output.
DESCRIPTION
The leftmost column of the standard output file includes lines that are only in file1. The middle
column includes lines that are only in file2. The rightmost column includes lines that are in both
file1 and file2. Columns are separated by tab characters.
If you specify - (dash) in place of one of the filenames, the comm command reads the standard
input file.
The file1 and file2 arguments should be sorted according to the collating sequence specified by
the LC_COLLATE environment variable (see the reference page for the sort command), or the
comm command fails.
EXAMPLES
In the following examples, file file1 contains the following sorted list of North American cities:
Anaheim
Baltimore
Boston
Chicago
Cleveland
Dallas
Detroit
Kansas City
Milwaukee
Minneapolis
New York
Oakland
Seattle
Toronto
2−102
Hewlett Packard Enterprise
527188-024
User Commands (c)
comm(1)
File file2 contains this sorted list:
Atlanta
Chicago
Cincinnati
Denver
Houston
Los Angeles
Miami
Montreal
New York
Philadelphia
Pittsburgh
San Diego
San Francisco
St. Louis
1.
To display the lines unique to each file and common to the two files, enter:
comm file1 file2
This command results in the following output:
Anaheim
Atlanta
Baltimore
Boston
Chicago
Cincinnati
Cleveland
Dallas
Denver
Detroit
Houston
Kansas City
Los Angeles
Miami
Milwaukee
Minneapolis
Montreal
New York
Oakland
Philadelphia
Pittsburgh
San Diego
San Francisco
Seattle
St. Louis
Toronto
The leftmost column contains lines only in file1, the middle column contains
lines only in file2, and the rightmost column contains lines common to both
files.
527188-024
Hewlett Packard Enterprise
2−103
comm(1)
OSS Shell and Utilities Reference Manual
2.
To display any one or two of the three output columns, include the appropriate
flags to suppress the columns you do not want. For example, the following
command displays lines that appear only in file1 and only in file2:
comm -3 file1 file2
Anaheim
Atlanta
Baltimore
Boston
Cincinnati
Cleveland
Dallas
Denver
Detroit
Houston
Kansas City
Los Angeles
Miami
Milwaukee
Minneapolis
Montreal
Oakland
Philadelphia
Pittsburgh
San Diego
San Francisco
Seattle
St. Louis
Toronto
3.
The following command displays lines that appear only in file2:
comm -13 file1 file2
Atlanta
Cincinnati
Denver
Houston
Los Angeles
Miami
Montreal
Philadelphia
Pittsburgh
San Diego
San Francisco
St. Louis
4.
The following command displays only those lines that appear in both file1 and
file2:
comm -12 file1 file2
Chicago
New York
2−104
Hewlett Packard Enterprise
527188-024
User Commands (c)
comm(1)
RELATED INFORMATION
Commands: cmp(1), diff(1), sort(1), uniq(1).
Files: locale(4).
527188-024
Hewlett Packard Enterprise
2−105
command(1)
OSS Shell and Utilities Reference Manual
NAME
command - Treats command arguments as a simple command
SYNOPSIS
command [-p] command_name [argument ...]
The command command causes the shell to treat the arguments to command as a simple
command and suppresses the default shell function lookup.
FLAGS
-p
Performs the command search using a default value for the path that is
guaranteed to find all of the standard utilities.
DESCRIPTION
The command command allows you to run the following commands:
•
User-defined commands whose names correspond to shell built-in commands.
•
System commands whose names correspond to shell built-in commands.
The command_name argument specifies the name of a utility. The one or more
optional arguments to command_name specify strings treated as arguments to the
specified utility.
EXAMPLES
To ensure execution of the simple command pwd instead of the pwd shell built-in command,
enter:
command -p pwd
The preceding command displays the full pathname of the current directory and does not perpetuate a display of the current directory location created by links, as the shell built-in command
might do.
EXIT VALUES
127
An error occurred in the command command, or the utility specified by the
command_name argument could not be invoked.
If no error occurs, the exit status of command is that of the command invoked by the
arguments to command.
2−106
Hewlett Packard Enterprise
527188-024
User Commands (c)
compress(1)
NAME
compress - Compresses or decompresses data
SYNOPSIS
compress [-CdfFnqvV] [-b maxbits] [file ...]
compress [-cCdfFnqvV] [-b maxbits] [file]
FLAGS
-b maxbits
Specifies the maximum number of bits to use to replace common substrings
in the file. The default value for the maxbits argument is 16, with values of 9
through 16 acceptable. First, the algorithm uses 9-bit codes 257 through 512.
Then it uses 10-bit codes, continuing until the maxbits limit is reached. (This
action is not permitted with the uncompress command.)
After the maxbits limit is reached, the compress command periodically
checks the compression ratio. If the ratio increases, compress continues to
use the existing code dictionary. However, if the compression ratio
decreases, compress discards the table of substrings and rebuilds it from the
beginning. This strategy allows the algorithm to adapt to the next block of
the file.
-c
Makes the compress command write to the standard output file; no input
files are changed and no .Z file is created. The nondestructive behavior of
the zcat command is identical to that of compress -cd.
-C
Produces output compatible with BSD compress revision 2.0.
-d
Specifies decompression (uncompressing) the specified file.
-f or -F
For both compressing and decompressing files (except when this command is
run in the background under the /usr/bin/sh file), this flag suppresses the
prompt as to whether an existing file given by the file operand should be
overwritten. For compressing files only, this flag forces the compression of
file even if the file does not actually get smaller or the corresponding file.Z
already exists.
-n
Specifies that no header is added or expected. This flag might be useful for
decompressing old files.
-q
Specifies a quiet operation. This flag is the default action; diagnostics are
displayed only if the -v flag is specified.
-v
For a compression operation, prints the percentage reduction of each file. For
a decompression operation, this flag prints the percentage expansion of each
file.
-V
Displays the version number and any options with which the program was
compiled.
DESCRIPTION
The compress command reduces the size of the specified files using adaptive Lempel-Ziv coding.
For compress, whenever possible, each file is replaced by one with the extension .Z that has the
same ownership modes, access, and modification times. Note that the filename extension used by
compress is different from that used by pack command compression (.z extension). If no files
527188-024
Hewlett Packard Enterprise
2−107
compress(1)
OSS Shell and Utilities Reference Manual
are specified or if the file operand is a - (dash), the standard input file is compressed and written
to the standard output file. If appending the .Z extension to the filename would make the name
exceed NAME_MAX bytes, the compress command fails.
Compressed files can be restored to their original form using the uncompress or zcat command
or using the compress command with the -d flag.
The amount of compression obtained depends on the size of the input file, the number of bits per
code, and the distribution of common substrings. Typically, files containing source code or plain
text are reduced by 50 to 60 percent.
If the file has an access control list (ACL), the ACL is preserved when the file is compressed.
For more information about ACLs, see the acl(5) reference page.
Environment Variables
This command supports the use of the LANG, LC_ALL, LC_CTYPE, LC_MESSAGES, and
NLSPATH environment variables.
EXAMPLES
To compress the file folder and print the percentage reduction, enter:
compress -v folder
The system responds with a message like:
folder: Compression: 43.94% -- replaced with folder.Z
EXIT VALUES
The compress command returns the following exit values:
0 (zero)
The compress utility successfully finished its processing.
1
An error occurred. The input file remains unmodified.
2
One or more files were not compressed because they would have
increased in size (and the -f flag was not specified).
&gt;2
An error occurred. The input file remains unmodified.
RELATED INFORMATION
Commands: uncompress(1), zcat(1).
STANDARDS CONFORMANCE
The following features are Hewlett Packard Enterprise extensions to the XPG4 Version 2
specification:
•
2−108
The -C, -F, -q, and -V flags are supported.
Hewlett Packard Enterprise
527188-024
User Commands (c)
continue(1)
NAME
continue - Resumes a for, while, until, or select loop
SYNOPSIS
continue [n]
DESCRIPTION
The continue command resumes the next iteration of the enclosing for, while, until, or select
loop. If n is specified, resumes at the nth enclosing level.
EXAMPLES
1.
The following shell script demonstrates the use of the continue command to
resume a loop:
for x in 1 2 3 4 5
do
if [ $x != 3 ]
then
print $x
else
continue
fi
done
EXIT VALUES
If an invalid argument is specified, the exit value is greater than 0 (zero).
NOTES
•
Parameter assignment lists that precede the command remain in effect when the
command completes.
•
I/O redirections are processed after parameter assignments.
•
Errors cause a script that contains the commands so marked to abort.
The continue command is a shell built-in command. It differs from the regular commands in that it does not open a new shell process when it executes.
A general discussion of shell built-in commands and a list of the OSS shell built-in commands are in the reference page for sh(1).
RELATED INFORMATION
Commands: break(1), sh(1)..
527188-024
Hewlett Packard Enterprise
2−109
cp(1)
OSS Shell and Utilities Reference Manual
NAME
cp - Copies files
SYNOPSIS
cp [-fip] [-W clobber] source_file target_file
cp [-fip] [-W clobber] source_file ... destination_directory
cp [-fLip] [-r | -R] [-W clobber] [ -W NOG ] [ -W NOE ] [source_file | source_directory]
... destination_directory
FLAGS
-f
Tries to unlink the destination file and proceed if a file descriptor for a
destination file cannot be obtained.
-L
Forces cp to follow symbolic links; useful with the -R flag, which does
not follow symbolic links by default.
-i
Requests confirmation when the copy operation requires a destination
file to be overwritten by a source file. An answer beginning with y, or the
locale’s equivalent of y, causes the cp command to overwrite the destination file and continue. Any other answer prevents overwriting of the
file.
-p
Preserves for the copy the modification time, access time, file mode, user
ID, and group ID of the source, as allowed by permissions. If the user ID
and group ID cannot be preserved, no error message is displayed and the
exit value is not altered. If the original is set-user ID or set-group ID,
and either the user ID or the group ID cannot be preserved, the set-userID and set-group-ID bits are not preserved in the copy’s permissions.
The -p flag cannot preserve owner ID or group ID information when
copying a file to a remote system.
-r
Copies the source directory and all of the subdirectories within it. This
flag is identical to the -R flag except that special files are not treated
differently from regular files (that is, -r follows symbolic links).
If you are using the -r flag to copy the contents of one directory to
another, and if the source directory contains subdirectories that do not
exist in the destination directory, the subdirectories are created. Created
directories have the same mode as the corresponding source directory,
unmodified by the process’s file mode creation mask (umask).
This flag has been proposed for obsolescence in a future revision of the
Single UNIX standard. Use the -R flag instead to ensure portability.
-R
Copies the source directory and all of the subdirectories within it. Special file types, such as symbolic links and block and character devices,
are re-created instead of copied.
If you are using the -R flag to copy the contents of one directory to
another, and if the source directory contains subdirectories that do not
exist in the destination directory, the subdirectories are created. Created
directories have the same mode as the corresponding source directory,
unmodified by the process’s file mode creation mask (umask).
2−110
Hewlett Packard Enterprise
527188-024
User Commands (c)
cp(1)
Hewlett Packard Enterprise extensions
-L
Overrides the default behavior of the -R flag so that cp follows symbolic
links.
-W clobber
Allows the existing target Guardian file to be overwritten using the data
from the source file. This operation retains the following attributes of
the target file:
•
The file code
•
The type of unstructured file (odd unstructured or even unstructured)
•
The buffering attribute (BUFFERED or NOBUFFERED)
•
The security attributes (RWEP)
You must set any other file attributes, as needed. However, if the target
file is a Guardian EDIT file (file code 101), the attributes are not
retained.
If the target file is protected by Safeguard and you use the -W clobber
flag, the Safeguard protection might be lost or changed. The cp command issues a warning when used with the -W clobber flag on a file protected by Safeguard.
When the -W clobber flag is used, the -p, -W NOG, and -W NOE flags
and the UTILSGE environment variable are ignored.
For more information about using this utility on Guardian files, see &quot;Use
on Guardian Objects.&quot;
-W NOG
Specifies that the /G directory should be omitted when the initial directory is root (/) and a recursive flag (-R or -r) is used. This flag is ignored
when the initial directory is not /, /E, or /E/system or when recursion
does not occur.
-W NOE
Specifies that the /E directory should be omitted when the initial directory is root (/) and a recursive flag (-R or -r) is used. This flag is ignored
when the initial directory is not root (/) or when recursion does not
occur.
Specify both the -W NOG and -W NOE flags to omit both the /G and /E directories.
DESCRIPTION
The cp command copies a source file or directory to a destination file or directory
In the first form given in SYNOPSIS, the cp command copies the contents of source_file into
target_file. If target_file exists, its contents are overwritten provided the user has write permission on target_file’s parent directory.
In the second form, two or more files are copied to the destination directory.
In the third form, source directories, including all subdirectories and files within them, are copied
to the destination.
A destination directory must exist in order for a source directory or source file to be copied to it.
Appropriate permissions are always required for file creation or overwriting.
If the destination directory exists, the source directory or files are copied into the destination with
their original names.
527188-024
Hewlett Packard Enterprise
2−111
cp(1)
OSS Shell and Utilities Reference Manual
If the destination exists, and both the source and destination are files, the source file overwrites
the destination file, permissions allowing.
If the destination does not exist and the source is a file, the destination is considered a file, and
the source is copied to it.
If the source and destination are either both directories or both files and they have the same
name, an error occurs and the copy fails.
Use With Access Control Lists (ACLs)
If the file being copied has an ACL, typically the new file created by the cp command retains the
ACL. However, if the cp command is executed remotely from a system that does not support
OSS ACLs, then the ACL for the file is not copied to the destination file. If destination fileset
supports OSS ACLs, the destination file might inherit ACL entries from the parent directory of
the destination file. If the destination fileset does not support OSS ACLs, the destination files do
not have ACLs. For more information about ACLs, see the acl(5) reference page.
For G-series RVUs, H06.19 and earlier H-series RVUs, or J06.08 and earlier J-series RVUs, the
OSS Network File System (NFS) cannot access OSS objects that have OSS ACLs that contain
optional ACL entries.
For L15.02 and later L-series RVUs, J06.09 and later J-series RVUs, and H06.20 and later Hseries RVUs, access by the OSS Network File System (NFS) to OSS objects that have OSS ACLs
that contain optional ACL entries can be allowed, depending upon the NFSPERMMAP attribute
value for the fileset that contains the object, however:
•
The cp command does not copy any ACLs associated with the object.
•
The permissions used when an object is created by the cp command depend on
the value of the NFSPERMMAP attribute for the fileset on the system that contained the original file.
For more information about NFS and ACLs, see the acl(5) reference page.
This table describes the impact of ACLs on the permissions used when a new file or
directory is created by the cp command and the cp command is not issued from NFS.
Cases not included in the table represent impossible situations.
_______________________________________________________
cp
Source
Source
Dest.
Impact of
Command Fileset
File/Dir
Filesset ACLs on
Supports
Supports Has Opt. Supports Permissions
ACLs
ACLs
ACLs
ACLs
of New File/Dir
_______________________________________________________
Y/N
Y/N
N
N
None
Y/N
Y/N
N
Y
See Note 2
Y/N
Y
Y
N
See Notes 1 and 3
N
Y
Y
Y
See Notes 1 and 2
Y
Y
Y
Y
See Note 4
_______________________________________________________
2−112
Note 1:
The optional ACLs for the source file or directory are not copied to the
destination file or directory.
Note 2:
If the destination parent directory has default ACL entries, those default
ACL entries are inherited by the new file or directory (see the acl(5)
reference page).
Note 3:
If you use the -p flag, the file permissions are copied to the destination
file or directory and the class entry permissions in the ACL are used for
the destination file or directory group permissions. Otherwise, the
Hewlett Packard Enterprise
527188-024
User Commands (c)
cp(1)
permissions for the destination file or directory are set using the nonACL descriptions.
Note 4:
If you use the -p flag, all ACL entries for the source file or directory are
copied to the destination file or directory. Otherwise, the permissions for
the destination file or directory are set using the non-ACL descriptions.
Use on Guardian Objects
Specify Guardian files with the /G pathname convention.
Only unstructured Guardian files are supported. If both the source and destination are Guardian
files, the file attributes specific to Guardian (such as extent sizes, file code, and file type) are
preserved. Thus if a type 101 EDIT Guardian file is copied within the Guardian volume, the target file is also a type 101 EDIT file, with all the line number information preserved. In addition,
if the -p flag is specified, other Guardian file attributes (such as user ID, file security, and timestamps) are preserved in the same manner they are preserved with the TACL command FUP DUP.
If you are copying a Guardian file to the OSS file hierarchy, only the content of the Guardian file
is copied: the Guardian file attributes are not preserved. Likewise, if you are copying an OSS
file to the Guardian file hierarchy, the target file is created as an unstructured Guardian file. Thus
if you copy a Guardian type 101 EDIT file to the OSS file hierarchy and then copy it back to the
Guardian file hierarchy, it will no longer be a Guardian type 101 EDIT file.
If a source file and destination file are determined to be the same, a diagnostic message is written
to the standard error file.
Because of the differences between the Guardian and OSS file systems, the following anomalies
can occur when OSS files are copied to a Guardian destination.
•
A destination pathname can contain illegal /G filename characters, even after it
has been transformed into a /G pathname. As a result, the destination file cannot
be created on the Guardian destination, and the copy operation fails.
•
A destination pathname might be transformed into a /G pathname that is quite
different from its original pathname. For example, the OSS filename abcde.fghi
is converted into the /G filename ABCDEFGH. In this example, the copy
operation succeeds but the name of the newly created destination file might
cause confusion if it is not anticipated.
•
OSS filenames that are similar to each other might be converted into the same /G
filename when copied to the Guardian file system.
•
If a source directory contains more than two levels of directories (the maximum
that the Guardian file system currently supports), the entire source subtree cannot
be copied completely to the Guardian target; only the directories at supported
levels are copied.
Environment Variables
The following environment variables affect the execution of the cp command:
UTILSGE
Specifies that Hewlett Packard Enterprise extensions to the root directory should be omitted when the initial directory is root (/) and a recursive option (-r or -R) is used in an OSS shell command. Application
programs that test this variable might also honor its settings.
The UTILSGE value can be any of the following:
527188-024
Hewlett Packard Enterprise
2−113
cp(1)
OSS Shell and Utilities Reference Manual
NOE
Omit the /E directory.
NOG
Omit the /G directory.
NOG:NOE
Omit both the /G and /E directories.
The effect of assigning a value to the UTILSGE environment variable is
the same as specifying the -W NOG or -W NOE flag in the command.
EXAMPLES
a.
To copy one file to another, enter:
cp file1 file2
If the file2 file exists (and is writable), its contents are replaced by the contents
of the file1 file.
b.
To copy files to a directory, enter:
cp file1 file2 dir1
The directory dir1 must exist.
c.
To copy all files in a directory and preserve their modification times, enter:
cp -p dir1/* dir2
d.
To copy a directory tree to another directory, enter:
cp -R dir1 dir2
The dir1 directory tree is created in the directory dir2.
e.
To copy all files with a name ending in the letter c from the current OSS directory to Guardian $VOL.SUBVOL, enter:
cp . /*c /G/vol/subvol
The Guardian filenames resulting from this copy are truncated to the first eight
characters. Characters in the OSS filenames that are illegal to the Guardian file
system are skipped during the renaming process. The specified target volume
must exist in the Guardian environment.
f.
To copy a Guardian file to an OSS directory, enter:
cp /G/vol/subvol/file /usr/bin
g.
To copy the files in an OSS directory named /usr/u/rose to the Guardian volume
/G/vol, enter:
cp -r /usr/u/rose /G/vol
If /usr/u/rose contains file1 (a plain text file) and also rose1 (a subdirectory), the
cp command creates the subvolume rose in /G/vol and copies only the file file1.
The subtree rose1 is not copied. The destination volume must exist in the Guardian environment.
h.
To copy all OSS files on remote node node1 to remote node node2, enter:
cp -r -W NOG /E/node1 /E/node2
This command creates the directory tree named node1 within the root directory
of node2.
2−114
Hewlett Packard Enterprise
527188-024
User Commands (c)
i.
cp(1)
To copy all OSS files on the local node to the remote node node1, enter:
cp -r -W NOG -W NOE / /E/node1
NOTES
Because /G and /E both appear in your local root directory, you should be very careful when
using OSS shell commands on or from the root directory. OSS shell commands that perform
recursive actions make no distinction between Guardian and OSS files or between local and
remote files. You can use the -W NOG and -W NOE flags or the UTILSGE environment variable to exclude objects in the Guardian file system or objects accessible through the Expand product.
RELATED INFORMATION
Commands: mv(1).
Miscellaneous topics: acl(5).
STANDARDS CONFORMANCE
The -L and -W flags and the UTILSGE environment variable are Hewlett Packard Enterprise
extensions to the XPG4 Version 2 specification.
527188-024
Hewlett Packard Enterprise
2−115
cpio(1)
OSS Shell and Utilities Reference Manual
NAME
cpio - Copies files to and from archive storage
SYNOPSIS
cpio -o[aABcv]
cpio -i[ABcdfmrtuv] [pattern ... ]
cpio -p[aAdlmuv] directory
FLAGS
The -i, -o, and -p flags are described in the DESCRIPTION section of this reference page.
-a
Resets the access times of copied files to the current time. (When the -l flag is
also specified, the access times of the linked files are not reset.)
-A
Suppresses warning messages about optional access control list (ACL) entries.
The cpio utility does not archive optional ACL entries. If this flag is not set, a
warning message is issued for each file that has optional ACL entries. For
more information about ACLs, see the acl(5) reference page.
-B
Performs block input/output, 5120 bytes to a record.
-c
Writes header information in ASCII character form. Specify this flag when
POSIX compliance is required and when you are creating or restoring archives
for or from another system. Archives written with -c must also be read with -c.
Use this flag to read archives written by pax.
-d
Creates directories as needed.
-f
Copies all files except those matching pattern (cpio -i only).
-l
Links files rather than copying them, whenever possible. This flag can be used
only with cpio -p.
-m
Retains previous file modification time. This flag is ineffective when copying
directories.
-r
Causes cpio to ask whether you want to rename each file before copying it. If
you do not want to change the filename, enter the current filename or press
only Return. In this last case, cpio does not copy the file.
-t
Prints a table of contents of the input. Printing the table of contents does not
copy any files.
-u
Copies unconditionally. Otherwise, a file from the archive with the same name
as an existing file in the file system is copied only if the archived file is the
newer one.
-v
Lists filenames. If you use this with the -t flag, the output looks similar to that
of the ls -l command.
DESCRIPTION
The cpio command is used to save and restore data from traditional-format cpio archives.
2−116
Hewlett Packard Enterprise
527188-024
User Commands (c)
cpio(1)
cpio -o (Copy Out)
This command reads file pathnames from the standard input file and copies these files to the standard output file along with pathnames and status information. Output is padded to a 512-byte
boundary.
cpio -i (Copy In)
This command reads an archive file created by the cpio -o command from the standard input file
and copies from it the files with names that match pattern. These files are copied into the current
directory tree. Permissions of the new files are the same as the permissions associated with the
files copied using cpio -o. The owner and group of the new files are those of the current user,
unless that user has appropriate privileges; if the user has appropriate privileges, cpio retains the
owner and group of the files copied using cpio -o. Only a user with appropriate privileges can
extract block special or character special files from an archive.
You can list more than one pattern operand using the filename notation described in the sh(1)
reference page. Note, however, that in the cpio command the special characters * (asterisk), ?
(question mark), and [ ] (brackets) match the / (slash) in pathnames, in addition to their use as
described for the sh command. The default pattern is *, which selects all files in the archive. In
an expression such as [a-z], the dash means &quot;through&quot; according to the current collating
sequence. The collating sequence is determined by the LC_COLLATE environment variable.
cpio -p (Directory Copy)
This command reads file pathnames from the standard input file and copies these files into the
directory named by directory. The specified directory must already exist. If these pathnames
include directory names and if these directories do not already exist, you must use the -d flag to
cause the directories to be created.
Note that you can copy special files only if you have appropriate privileges. Pathnames cannot
exceed 128 bytes. Avoid giving cpio pathnames made up of many uniquely linked files, because
cpio might not have enough memory to keep track of them and could lose linking information.
For filesets that support OSS access control lists (ACLs), this command also copies any ACL
entries associated with the file, so that the copied file has the same ACL entries as the source file.
Environment Variables
This command supports the use of the LANG, LC_ALL, LC_COLLATE, LC_CTYPE,
LC_MESSAGES, LC_TIME, NLSPATH, and TZ environment variables.
CAUTIONS
When redirecting the output from cpio to a special file (device), redirect it to the raw device and
not the block device. Because writing to a block device is done asynchronously, there is no way
to know whether the end of the device has been reached.
EXIT VALUES
The exit values for cpio are as follows:
0 (zero) The command executed successfully.
&gt;0
527188-024
An error occurred. If a file or directory cannot be created or overwritten, cpio
continues with the next file in the archive or the next file to be added to the
archive.
Hewlett Packard Enterprise
2−117
cpio(1)
OSS Shell and Utilities Reference Manual
RELATED INFORMATION
Commands: ar(1), find(1), ls(1), pax(1), sh(1).
Files: cpio(4), locale(4).
Miscellaneous topics: acl(5).
STANDARDS CONFORMANCE
This command conforms to the XPG4 Version 2 specification with extensions.
2−118
Hewlett Packard Enterprise
527188-024
User Commands (c)
crontab(1)
NAME
crontab - Submits a schedule of commands to cron
SYNOPSIS
crontab [file]
crontab -l | -v | -e
crontab -r
The crontab command copies the specified file, or the standard input file if you do not
specify a file, into a directory that holds all users’ crontab files. The cron command runs
commands according to the instructions in the crontab files.
FLAGS
-e
Edits a copy of your crontab entry. If the crontab entry does not exist, crontab creates an empty entry to edit. The -e flag invokes the editor specified by
the EDITOR environment variable, or it uses /bin/vi by default. crontab
installs the new entry when editing is complete.
-l
Lists the contents of your crontab file.
-r
Removes the crontab file from the crontab directory.
-v
Displays the name of your crontab file and the date and time at which you submitted it using crontab.
DESCRIPTION
The crontab command replaces your crontab file, which is contained in the
/var/spool/cron/crontabs system directory, with the crontab file you specify. In your crontab
file you have to redirect the output to the standard output or standard error file.
You can use the crontab command if your login name appears in the /var/adm/cron/cron.allow
file. If that file does not exist, the crontab command checks the /var/adm/cron/cron.deny file to
determine if your login name should be denied access to crontab. The cron.allow and
cron.deny files contain one login name per line. If neither file exists, you can submit a job only
if you are operating with appropriate privileges.
Each crontab file entry consists of a line with six fields, separated by spaces and tabs, that contain, respectively:
a.
The minute (0 to 59) at which the command sequence executes.
b.
The hour (0 to 23) of command execution.
c.
The day of the month (1 to 31) of command execution.
d.
The month of the year (1 to 12) of command execution.
e.
The day of the week (0 to 6 for Sunday to Saturday) of command execution.
f.
The shell command to be executed.
Each of these fields can contain:
•
527188-024
A number in the specified range.
Hewlett Packard Enterprise
2−119
crontab(1)
OSS Shell and Utilities Reference Manual
•
Two numbers separated by a dash to indicate an inclusive range.
•
A list of numbers, separated by commas, which selects all numbers in the list.
•
An asterisk, meaning all legal values.
Days can be specified by two fields (day of the month and day of the week). If you
specify both as a list of elements, both are adhered to. For example, the following entry:
0 0 1,15 * 1 command
would run command at midnight on the first and fifteenth days of each month, as well as
every Monday. To specify days by only one field, the other field should contain an *
(asterisk).
The cron program runs the command named in the sixth field at the selected date and
time. If you include a % (percent sign) in the sixth field, cron treats everything that precedes it (in that field) as the command invocation, and makes all that follows it available
to the standard input file, unless you escape the percent sign (\%) or double quote it
(&quot;%&quot;). A % (percent sign) in the sixth field is translated to a newline character.
The shell runs only the first line of the command field (up to a % or End-of-Line). All
other lines are made available to the command as the standard input file.
Blank lines and lines whose first nonblank character is # (pound sign) are treated as comments and ignored by cron.
The cron program invokes a subshell from your $HOME directory. It will not run your
.profile file. If you schedule a command to run when you are not logged in and you want
to have commands in your .profile run, you must explicitly do so in the crontab file.
(For a more detailed discussion of how you can invoke sh, see the sh command.)
Environment Variables
The cron program supplies a default environment for every shell, defining HOME, LOGNAME,
SHELL (=/bin/sh), and PATH (=:/bin:/bin/unsupported:/usr/bin).
This command supports the use of the EDITOR, LANG, LC_ALL, LC_CTYPE,
LC_MESSAGES, and NLSPATH environment variables.
EXAMPLES
The following examples show valid crontab file entries.
a.
To write the time to the file every hour on the hour, enter:
0 * * * * echo The hour is ‘date‘. &gt;/datefile
This example uses command substitution. (For more information, see the sh
command.)
b.
To run cal at 6:30 a.m. every Monday, Wednesday, and Friday, enter:
30 6 * * 1,3,5 cal &gt; /calfile
c.
To define text for the standard input file to a command, enter:
0 16 10-31 12 5 wall %HAPPY HOLIDAYS% Drive safely%
This writes a message at 4:00 p.m. each Friday between December 10 and 31 to
all users logged in.
The text following the first % (percent sign) defines the standard input file to the
2−120
Hewlett Packard Enterprise
527188-024
User Commands (c)
crontab(1)
wall command as follows:
HAPPY HOLIDAYS
Drive safely
FILES
/var/spool/cron/crontabs
Directory containing the crontab files
/var/adm/cron/cron.allow
List of allowed users
/var/adm/cron/cron.deny
List of denied users
$HOME/.profile
User profile
NOTES
a.
When entries are made to a crontab file, all previous entries are erased.
b.
If cron.allow exists, a login name with appropriate privileges be listed for that
user to be able to use the command.
EXIT VALUES
The crontab utility returns the following exit values:
0 (zero)
The crontab utility successfully finished its processing.
&gt;0
An error occurred. Your crontab entry is not submitted, edited, or listed.
RELATED INFORMATION
Commands: cron(8), sh(1).
STANDARDS CONFORMANCE
This command conforms to the XPG4 Version 2 specification with extensions. The following
features are Hewlett Packard Enterprise extensions to the XPG4 Version 2 specification:
•
527188-024
The -v flag is supported.
Hewlett Packard Enterprise
2−121
csplit(1)
OSS Shell and Utilities Reference Manual
NAME
csplit - Splits files by context
SYNOPSIS
csplit [-f prefix] [-ks] [-n number] [file | -] argument ...
The csplit command reads the specified file and separates it into segments defined by the
specified arguments.
FLAGS
-f prefix Specifies the prefix name (xx by default) for the created file segments. If the
prefix argument would create a filename larger than NAME_MAX bytes, an
error results, the csplit command exits with a diagnostic message, and no files
are created.
-k
Keeps created file segments intact in the event of an error.
-n number
Uses number decimal digits to form filenames for the file segments. The
default value is 2.
-s
Suppresses the display of character counts.
DESCRIPTION
If you specify - (dash) in place of the input filename, the csplit command reads from the standard
input file.
By default, csplit writes the file segments to files named xx00 ...xxn, where n is the number of
arguments listed on the command line. By default, these new files get the following segments of
file:
00
From the start of file up to, but not including, the line referenced by the first
argument.
01
From the line referenced by the first argument up to the line referenced by the
second argument.
n+1
From the line referenced by the last argument to the end of file.
The csplit command does not alter the original file.
The specified arguments can be a combination of the following:
/pattern/[offset]
Creates a file using the contents of the lines from the current line up to, but not
including, the line that results from the evaluation of the regular expression
with an offset, if included. The offset argument can be any integer (positive or
negative) that represents a number of lines.
%pattern%[offset]
Has the same effect as /pattern/ except no segment file is created.
+number
-number Move forward or backward the specified number of lines from the line matched
by an immediately preceding pattern argument.
line_number
Creates a file containing the segment from the current line up to, but not
including, line_number, which becomes the current line.
2−122
Hewlett Packard Enterprise
527188-024
User Commands (c)
csplit(1)
{number}
Repeats the preceding argument the specified number of times. This number
can follow any of the pattern or line_number arguments. If it follows a pattern
argument, the csplit command reuses that pattern the specified number of
times. If it follows a line_number argument, csplit splits the file from that
point every line_number of lines for number times.
Place within quotation marks all pattern arguments that contain spaces or other characters special to the shell. Patterns may not contain embedded newline characters.
See the reference page for the grep command for information about creating patterns. In
an expression such as [a-z], the dash means &quot;through&quot; according to the current collating
sequence. The collating sequence is determined by the value of the LC_COLLATE
environment variable.
EXAMPLES
a.
To split the text of a book into a separate file for each chapter, enter:
csplit book &quot;/ˆChapter *[0-9]/&quot; {9}
This command creates files named xx00, xx01, xx02,...,xx09, and xx10, which
contain individual chapters of the file book. The file xx00 contains the front
matter that comes before the first chapter. The {9} after the pattern causes the
csplit command to create individual chapters up until file xx09; the remainder of
book is then placed in file xx10.
b.
To specify the prefix for the created filenames, enter:
csplit -f chap book &quot;/ˆChapter *[0-9]/&quot; {9}
This command splits book into files named chap00, chap01,...chap9, and
chap10.
RELATED INFORMATION
Commands: ed(1), sh(1), split(1).
Files: locale(4).
527188-024
Hewlett Packard Enterprise
2−123
cut(1)
OSS Shell and Utilities Reference Manual
NAME
cut - Displays selected parts from each line of a file
SYNOPSIS
cut -b list [-n] [file ...]
cut -c list [file ...]
cut -f list [-d character] [-s] [file ...]
The cut command locates the specified parts in each line of the specified file and writes the
characters in them to the standard output file.
FLAGS
-b list
Cuts selections based on a list of bytes. Each selected byte is output, unless
you also specify the -n flag. For example, if you specify -b 1-72, the cut command writes out the first 72 bytes in each line of the file.
-c list
Cuts selections based on a list of characters.
-d character
Uses the specified character as the field delimiter (separator) when you specify
the -f flag. You must quote characters with special meaning to the shell, such
as the space character. Any character can be used as character. The default
field delimiter is a tab character.
-f list
Specifies a list of fields assumed to be separated in the file by a field delimiter
character, specified by the -d flag or the tab character by default. For example,
if you specify -f 1,7, the cut command writes out only the first and seventh
fields of each line. If a line contains no field delimiters, cut passes them
through intact (useful for table subheadings) unless you specify the -s flag.
-n
Does not split characters. When specified with the -b flag, each element in list
of the form low-high (hyphen-separated numbers) is modified as follows:
•
If the byte selected by low is not the first byte of a character, low is
decremented to select the first byte of the character originally selected
by low.
•
If the byte selected by high is not the last byte of a character, high is
decremented to select the last byte of the character prior to the character originally selected by high, or 0 (zero) if there is no prior character.
If the resulting range element has high equal to 0 (zero) or low greater
than high, the list element is dropped from list for that input line
without causing an error.
Each element in list of the form low- is treated as previously described with
high set to the number of bytes in the current line, not including the terminating newline character. Each element in list of the form -high is treated as previously described with low set to 1. Each element in list of the form number (a
single number) is treated as previously described with low set to number and
high set to number.
-s
Suppresses lines that do not contain delimiter characters (use only with the -f
flag). Unless you include this flag, lines with no delimiters are passed through.
DESCRIPTION
If you do not specify a file or if you specify a - (dash), the cut command reads the standard input
file.
2−124
Hewlett Packard Enterprise
527188-024
User Commands (c)
cut(1)
You must specify the -b flag (to select bytes), the -c flag (to select characters), or the -f flag (to
select fields). The list argument (see the -b, -c, and -f flags) must be a space-separated or
comma-separated list of positive numbers and ranges. Ranges can be in three forms:
•
Two positive numbers separated by a - (dash), as in the form low-high, which
represents all fields from the first number to the second number.
•
A positive number preceded by a - (dash), as in the form -high, which represents
all fields from field number 1 to that number.
•
A positive number followed by a - (dash), as in the form low-, which represents
that number to the last field, inclusive.
The elements in list can be repeated, can overlap, and can be specified in any order.
Some sample list specifications are as follows:
1,4,7 or 1 4 7
First, fourth, and seventh bytes or fields.
1-3,8
First through third and eighth bytes or fields.
-5,10
First through fifth and tenth bytes or fields.
3-
Third through last bytes or fields.
The fields specified by list can be a fixed number of byte positions, or the length can vary
from line to line and be marked with a field delimiter character, such as a tab character.
You can also use the grep command to make horizontal cuts through a file and the paste
command to put the files back together. To change the order of columns in a file, use the
cut and paste commands.
EXAMPLES
To display several fields of each line of a file, enter:
cut -f 1,5 -d : /etc/passwd
This command displays the login name and full username fields of the system password file.
These are the first and fifth fields (-f 1,5) separated by colons (-d :).
So, if the /etc/passwd file looks like this:
su:UHuj9Pgdvz0J&quot;:0:0:User with special privileges:/:
daemon:*:1:1::/etc:
bin:*:2:2::/usr/bin:
sys:*:3:3::/usr/src:
adm:*:4:4:System Administrator:/usr/adm:
pierre:*:200:200:Pierre Harper:/u/pierre:
joan:*:202:200:Joan Brown:/u/joan:
Then cut -f 1,5 -d : /etc/passwd produces this output:
su:User with special privileges
daemon:
bin:
sys:
adm:System Administrator
pierre:Pierre Harper
joan:Joan Brown
527188-024
Hewlett Packard Enterprise
2−125
cut(1)
OSS Shell and Utilities Reference Manual
RELATED INFORMATION
Commands: grep(1), paste(1).
2−126
Hewlett Packard Enterprise
527188-024
Section 3. User Commands (d - f)
This section contains reference pages for the Open System Services (OSS) user
commands with names starting with the letters d through f.
527188-024
Hewlett Packard Enterprise
3−1
date(1)
OSS Shell and Utilities Reference Manual
NAME
date - Display the date and time
SYNOPSIS
date [-u] [+format]
The date command displays the date and time.
FLAGS
-u
Performs operations as if the TZ environment variable was set to the string UTC0 or
its equivalent historical value GMT0. Otherwise, the date command uses the time
zone indicated by the TZ environment variable or the system default time zone if that
variable is not set.
DESCRIPTION
The date command writes the current date and time to the standard output file if called with no
flags or with a flag list that begins with a + (plus sign). Do not use the date command to change
or set the date and time; use Guardian utilities instead.
The LC_TIME variable, if it is defined, controls the ordering of the day and month numbers in
the date specifications. The default order is mmddHHMM.SSyy, where:
•
mm is the month number (01=January).
•
dd is the number of the day in the month.
•
HH is the hour in the day (using a 24-hour clock).
•
MM is the minute number.
•
SS is the number of seconds.
•
yy is the last two numbers of the year.
The yymmddHHMM[.SS] format cannot be used if the year is in the range 01-12 (this is how the
date command differentiates between the two formats).
If the locale defines ordering such that the day is specified before the month, the format is
ddmmHHMM[.SS[yy]], yyddmmHHMM[.SS], or ddmmHHMM[yy].
The current month, day, hour, and year are default values. The system operates in Coordinated
Universal Time (UTC).
If you follow keyword date with a + (plus sign) and a field descriptor, you can control the output
of the command. You must precede each field descriptor with a % (percent sign). The system
replaces the field descriptor with the specified value. Enter a literal % as %%. The date command copies any other characters to the standard output file without change. date always ends
the string with a newline character. Output fields are fixed size (zero-padded if necessary).
The date command prints out a usage message on any unrecognized flags or input.
Field Descriptors
a
Displays the locale’s abbreviated weekday name (Sun through Sat or the nonEnglish
equivalent).
3−2
A
Displays the locale’s full weekday name.
b
Displays the locale’s abbreviated month name.
B
Displays the locale’s full month name.
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
date(1)
c
Displays the locale’s appropriate time and date representation.
C
Displays the locale’s century (the year divided by 100 and truncated to an integer) as a
decimal number (00 through 99).
d
Displays the day of the month as a decimal number (01 through 31).
D
Displays the date in the format mm/dd/yy (the default format) or as specified by the
LC_TIME environment variable, if defined.
e
Displays the day of the month as a decimal number (1 through 31 in a 2-digit field with
leading space fill).
Ec
Specifies the locale’s alternative appropriate date and time representation.
EC
Specifies the name of the base year (period) in the locale’s alternative representation.
Ex
Specifies the locale’s alternative date representation.
Ey
Specifies the offset from the display of the %EC field discriptor (year only) in the
locale’s alternative representation.
EY
Specifies the full alternative year representation.
h
Is a synonym for the %b field descriptor.
H
Displays the hour as a decimal number (00 through 23).
I
Displays the hour as a decimal number (01 through 12).
j
Displays the day of the year as a decimal number (001 through 366).
m
Displays the month of the year as a decimal number (01 through 12).
M
Displays the minute as a decimal number (00 through 59).
n
Inserts a newline character.
N
Represents the alternative era name.
o
Represents the alternative era year.
Od
Specifies the day of the month using the locale’s alternative numeric symbols.
Oe
Specifies the day of the month using the locale’s alternative numeric symbols.
OH
Specifies the hour (24-hour clock) using the locale’s alternative numeric symbols.
OI
Specifies the hour (12-hour clock) using the locale’s alternative numeric symbols.
Om
Specifies the month using the locale’s alternative numeric symbols.
OM
Specifies the minutes using the locale’s alternative numeric symbols.
OS
Specifies the seconds using the locale’s alternative numeric symbols.
OU
Specifies the week number of the year (with Sunday as the first day of the week) using
the locale’s alternative numeric symbols.
Ow
Specifies the weekday as a number in the locale’s alternative representation
(Sunday = 0).
527188-024
Hewlett Packard Enterprise
3−3
date(1)
OSS Shell and Utilities Reference Manual
OW
Specifies the week number of the year (with Monday as the first day of the week) using
the locale’s alternative numeric symbols.
Oy
Specifies the year (offset from the display of the %C field descriptor) in alternative
representation.
p
Displays the locale’s equivalent of either AM or PM.
r
Displays the time (12-hour clock) using AM/PM notation (or the nonhown in this
nonEnglish equivalent) in the format hh:mm:ss AM or hh:mm:ss PM. In the OSS locale,
this is equivalent to the field descriptors %I: %m: %S %p.
S
Displays the seconds as a decimal number (00 through 61).
t
Inserts a tab character.
T
Displays the time in 24-hour clock format (00 through 23) as hh:mm:ss (the default
format) or as specified by the LC_TIME environment variable, if defined.
U
Displays the week number of the year (Sunday is the first day of the week) as a decimal
number (00 through 53).
w
Displays the day of the week as a decimal number (Sunday = 0).
W
Displays the week number of the year (Monday is the first day of the week) as a
decimal number (00 through 53).
x
Displays the locale’s appropriate date representation.
X
Displays the locale’s appropriate time representation.
y
Displays the last two numbers of the year as a decimal number (00 through 99).
Y
Displays the full year as a decimal number.
Z
Displays the time zone name or no characters if the time zone cannot be determined.
%%
Inserts a % character.
EXAMPLES
1.
To display the current date and time, enter:
date
The output might look like the following:
Thu Apr 9
2.
13:21:30 EDT
1992
To display the date and time in a specified format, enter:
date +&quot;%r %d %h %y (%a)&quot;
This displays the date (assume the year is 1992) as:
01:21:30
PM
09
Apr
92
(Thu)
RELATED INFORMATION
Files: locale(4).
STANDARDS CONFORMANCE
The date and time are set through the Guardian environment.
3−4
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
dc(1)
NAME
dc - Performs integer arithmetic with arbitrary precision
SYNOPSIS
dc [file]
DESCRIPTION
The dc command is an arbitrary-precision arithmetic calculator. dc takes its input from file or the
standard input file until it reads an End-of-File character. It writes to the standard output file. dc
operates on integers by default, but you can use subcommands to specify an input base, an output
base, and a number of fractional digits to be maintained.
The bc command is a preprocessor for the dc command. The bc command provides infix notation and a syntax similar to the C language, which implements functions and reasonable control
structures for programs.
SUBCOMMANDS
number Pushes the specified value onto the stack. number is an unbroken string consisting of
the digits 0 through 9. To specify a negative number, precede number with _ (underscore). A number can contain a decimal point.
+-*/%ˆ
Adds (+), subtracts (-), multiplies (*), divides (/), remainders (%), or exponentiates (ˆ)
the top two values on the stack. dc pops the top two values off the stack and pushes the
result on the stack in their place.
!
Interprets the rest of the line as a system command.
?
Executes a line of input from the standard input file.
c
Cleans the stack: pops all values on the stack.
d
Duplicates the top value on the stack.
f
Displays all values on the stack.
i
Pops the top value on the stack and uses that value as the number radix for further
input.
I
Pushes the input base onto the stack.
k
Pops the top value on the stack and uses that value as a nonnegative scale factor. The
appropriate number of places is displayed on output and is maintained during multiplication, division, and exponentiation. The interaction of scale factor, input base, and
output base is reasonable if all are changed together.
lx
Pushes the value in register x onto the stack. Register x is not changed. All registers
start with 0 (zero) value.
Lx
Treats x as a stack and pops its top value onto the main stack.
o
Pops the top value on the stack and uses that value as the number radix for further output.
O
Pushes the output base onto the stack.
527188-024
Hewlett Packard Enterprise
3−5
dc(1)
OSS Shell and Utilities Reference Manual
p
Prints the top value on the stack. The top value remains unchanged.
P
Interprets the top value on the stack as an ASCII string, prints it, and removes it.
q
Exits the program. If dc is executing a string, it pops the recursion level by two.
Q
Pops the top value on the stack and pop the string execution level by that value.
sx
Pops the top value on the stack and stores it in a register named x, where x can be any
single-byte character.
Sx
Treats x as a stack: pops the top value on the main stack and pushes that value onto
stack x.
v
Replaces the top value on the stack by its square root. Any existing fractional part of
the argument is used, but otherwise the scale factor is ignored.
x
Treats the top value on the stack as a character string and executes it as a string of dc
commands.
X
Replaces the top value on the stack by its scale factor.
z
Pushes the number of elements in the stack onto the stack.
Z
Replaces the top value on the stack with the number of digits in that value.
[string] Puts string onto the stack.
&lt;x
Pops the top two values on the stack and compares them. Register x is executed if the
stated relationship is TRUE.
;:
Are used for array operations.
EXAMPLES
1.
To use dc as a calculator, proceed as follows:
Enter:
1 4 / p [ Divide 1 by 4 ]
The system responds as follows:
0
Enter:
1 k [ Keep 1 decimal place]s.
14/p
The system responds as follows:
0.2
Enter:
3 k [ Keep 3 decimal places]s.
14/p
The system responds as follows:
0.250
3−6
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
dc(1)
Enter:
16 63 5 / + p [ Divide 63 by 5, add the result to 16 ]
The system responds as follows:
28.600
Enter:
16 63 5 + / p [ Add 63 and 5, divide the result by 16 ]
The system responds as follows:
0.235
You can type the comments (enclosed in brackets) into the command, but they are provided only for your information.
When you enter dc expressions directly from the keyboard, press the End-of-File key
sequence to end the dc session and return to the shell command line.
2.
To load and run a dc program file, proceed as follows:
Enter:
dc prog.dc
5 lf x p [ 5 factorial ]s.
The system responds as follows:
120
Enter:
10 lf x p [ 10 factorial ]s.
The system responds as follows:
3628800
This command interprets the dc program saved in prog.dc then reads from thestandard
input file. The lf x evaluates the function stored in register f, which could be defined in
the program file prog.dc as:
[ f: compute the factorial of n ]s.
[
(n = the top of the stack) ]s.
[ If 1&gt;n do b; If 1&lt;n do r ]s.
[d 1 &gt;b d 1 &lt;r] sf
[ Return f(n) = 1
[d - 1 +] sb
]s.
[ Return f(n) = n * f(n-1)
[d 1 - lf x *] sr
]s.
You can create dc program files with a text editor or with the -c (compile) flag of the bc
command. When you enter dc expressions directly from the keyboard, press the End-ofFile key sequence to end the dc session and return to the shell command line.
527188-024
Hewlett Packard Enterprise
3−7
dc(1)
OSS Shell and Utilities Reference Manual
RELATED INFORMATION
Commands: bc(1).
Files: locale(4).
STANDARDS CONFORMANCE
This command is an extension to the XPG4 Version 2 specification.
3−8
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
del_define(1)
NAME
del_define - Deletes one or more DEFINEs from the current OSS shell
SYNOPSIS
del_define {{define-name}... | all}
FLAGS
all
Specifies that all existing DEFINEs except =_DEFAULTS are to be deleted.
DESCRIPTION
The del_define command is specific to OSS and an OSS shell built-in command. It deletes
DEFINEs from the OSS shell.
The del_define command affects only DEFINEs for the current shell process. It is similiar to the
TACL DELETE DEFINE command. Refer to the DELETE DEFINE command in the TACL
Reference Manual.
define-name
Specifies the name of the DEFINE to be deleted. The name can be 2 through 24 characters long. The first character must be an equal sign (=) and the second must be a
letter. The =_DEFAULTS DEFINE cannot be deleted.
EXAMPLES
1.
To delete the DEFINE named =DFILE, enter:
del_define =DFILE
2.
To delete all defines in the current OSS shell (except =_DEFAULTS), enter:
del_define all
EXIT VALUES
The following exit values are returned:
0
DEFINEs were deleted successfully.
&gt;0
An error occurred.
NOTES
The del_define command is a shell built-in command. It differs from the regular commands in
that it does not open a new shell process when it executes.
A general discussion of shell built-in commands and a list of the OSS shell built-in commands
are in the reference page for sh(1).
RELATED INFORMATION
Commands: add_define(1), info_define(1), set_define(1), show_define(1).
STANDARDS CONFORMANCE
The del_define command is an Hewlett Packard Enterprise extension to the XPG4 Version 2
specification.
527188-024
Hewlett Packard Enterprise
3−9
df(1)
OSS Shell and Utilities Reference Manual
NAME
df - Displays statistics of filesets
SYNOPSIS
df [-k] [ [fileset] ... ]
FLAGS
-k
Causes disk space numbers to be reported in 1024-byte (1-kilobyte) blocks. By
default, all numbers are reported in 512-byte blocks.
DESCRIPTION
The df command displays the amount of used and available disk space on the fileset specified as
fileset. It also displays the status (started, stopped, or unknown), how much of the total capacity
of the fileset has been used, and the mount point of the fileset.
The value specified as fileset must be a fileset name as defined in the OSS Monitor subsystem of
the Subsystem Control Facility (SCF). Valid values for fileset are not case-sensitive. If more
than 15 values are specified for fileset, only the first 15 specified are displayed.
If no fileset name is specified, only statistics for the first 15 filesets are displayed. If more than 15
filesets exist, the df command displays a warning message.
EXAMPLES
Entering the command df with no flags on a node with 16 filesets displays:
WARNING: MORE THAN 15 FILESETS ARE PRESENT
Filesystem State
512-blocks Used
Avail Capacity
DSAP
STOPPED
R1
STOPPED
R2
STOPPED
R27
STOPPED
R28
STOPPED
R29
STOPPED
R3
STOPPED
R30
STOPPED
R31
STOPPED
R32
STOPPED
R33
STOPPED
R34
STOPPED
R35
STOPPED
R9
STOPPED
ROOT
STARTED 69927952 69620808 307144
100%
Mounted on
/dsap
/home/ali
/home/ali
/home/ali
/home/ali
/home/ali
/home/ali
/home/ali
/home/ali
/home/ali
/home/ali
/home/ali
/home/ali
/home/ali
/
RELATED INFORMATION
Commands: du(1).
Functions: fstatvfs(2).
STANDARDS CONFORMANCE
The Hewlett Packard Enterprise implementation does not support the -P or -t flag.
The Hewlett Packard Enterprise implementation does not allow the specification of filenames.
3−10
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
diff(1)
NAME
diff - Compares text files
SYNOPSIS
diff [-c | -C number | -e | -f | -n] [-br] directory1 directory2
diff [-c | -C number | -e | -f | -n] [-b] file1 file2
FLAGS
The -c, -C, -e, -f, and -n flags are mutually exclusive.
The -r flag can be specified only with directory comparisons.
The -b flag can be used in combination with any other flags and in both file and directory comparisons.
-b
Causes trailing spaces and tabs (blanks) to be ignored, and other strings of spaces and
tabs to be considered to be identical.
-c
Produces a listing with the default number of lines of context (3 lines). The output lists
the files being compared and their last modification dates, then lists the differing lines.
Lines that are changed from one file to the other are marked in both files with an ! (exclamation point). Changes that lie within the specified number of lines of each other are
grouped together on output.
-C number
Produces output that provides the number of lines of context specified by the number
argument (where number is a positive decimal integer).
-e
Produces a script of a, c, d, and s commands for the editor ed, which can re-create file2
from file1. In connection with -e, the following shell program can help maintain multiple versions of a file. Only an ancestral file ($1) and a chain of version-to-version ed
scripts ($2, $3, ...) made by the diff command need be on hand. A &quot;latest version&quot;
appears on the standard output, as shown below:
(shift; cat $*; echo ’1,$p’) | ed - $1
Extra commands are added to the output when comparing directories with -e; the result
is an sh script for converting text files common to the directories from their state in
directory1 to their state in directory2.
-f
Produces a script similar to that of -e, but not useful with the ed editor, and in the opposite order.
-r
Checks files in common subdirectories recursively.
DESCRIPTION
Input Options
If neither the file1 nor the file2 argument is a directory, then either can be given as - (dash), in
which case the standard input is used. If file1 is a directory and file2 is a file, or vice versa, a file
in the specified directory with the same name as the specified file is used.
If both arguments are directories, the diff command sorts the contents of the directories by name,
and then runs the regular diff file algorithm on text files that are different. Binary files that differ,
common subdirectories, and files that appear in only one directory are also listed.
527188-024
Hewlett Packard Enterprise
3−11
diff(1)
OSS Shell and Utilities Reference Manual
Output Options
There are several choices for output format. The default output format contains lines of these
forms:
number1 a number2,number3
number1,number2 d number3
number1,number2 c number3,number4
These lines resemble ed commands to convert file1 into file2. a indicates that a line or lines were
added to one of the files; d indicates that a line or lines were deleted; and c indicates that a line
or lines were changed. The numbers after the letters pertain to file2. In fact, by exchanging a for
d and reading backward, one can ascertain how to convert file2 into file1. As in the editor ed,
identical pairs where number1 = number2 or number3 = number4 are abbreviated as a single
number.
Following each of these lines are all the lines affected in the first file, flagged by &lt; (left angle
bracket), then all the lines that are affected in the second file, flagged by &gt; (right angle bracket).
Except in rare circumstances, the diff command finds the smallest sufficient set of file
differences.
EXAMPLES
1.
To compare two files, enter:
diff chap1.bak chap1
This command displays the differences between the files chap1.bak and chap1.
2.
To compare two files, ignoring differences in the amount of white space, enter:
diff -b prog.c.bak prog.c
If two lines differ only in the number of spaces and tabs between words, then the diff
command considers them to be the same.
3.
To create a file containing commands that the ed command can use to reconstruct one file
from another, enter:
diff -e ch2 ch2.old &gt; new.old.ed
This command creates a file named new.to.old.ed that contains the ed subcommands to
change file chap2 back into the version of the text found in file chap2.old. In most
cases, new.to.old.ed is a much smaller file than chap2.old.
4.
You can save disk space by deleting the file chap2.old, and you can reconstruct the file at
any time by entering:
(cat new.old.ed ; echo ’1,$p’) | ed - ch2 &gt; ch2.old
The commands in parentheses add 1,$p to the end of the editing commands sent to the ed
editor. The 1,$p causes the ed command to write the file to standard output after editing
it. This modified command sequence is then piped to the ed command ( | ed ), and the
editor reads it as standard input. The - flag causes the ed command to not display the file
size and other extra information, because it would be mixed with the text of file
chap2.old.
NOTES
Editing scripts that are produced by the -e or -f flags cannot create lines that consist of a single .
(dot) character.
3−12
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
diff(1)
Block, character, or FIFO special files cannot be used with the diff command because they cause
the command to exit.
Because /G and /E both appear in your local root directory, you should be very careful when
using OSS shell commands on or from the root directory. OSS shell commands that perform
recursive actions make no destinction between Guardian and OSS files or between local and
remote files.
EXIT VALUES
An exit value of 0 (zero) indicates no differences; a value of 1 indicates differences were found,
and value greater than 1 indicates an error.
RELATED INFORMATION
Commands: comm(1), ed(1), pr(1).
527188-024
Hewlett Packard Enterprise
3−13
dircmp(1)
OSS Shell and Utilities Reference Manual
NAME
dircmp - Compares two directories
SYNOPSIS
dircmp [-d] [-s] directory1 directory2
FLAGS
-d
Displays, for each common filename, the differing contents of the two files, if any. The
display format is the same as that of the diff command.
-s
Suppresses listing of the names of identical files.
DESCRIPTION
The dircmp command reads directory1 and directory2, compares their contents, and writes the
results to the standard output file.
First, dircmp compares the filenames in each directory. When the same filename appears in
both, dircmp compares the contents of the two files.
In the output, dircmp lists the files unique to each directory. It then lists the files with identical
names but different contents. If entered without a flag, dircmp also lists files that have both
identical names and identical contents.
Environment Variables
This command supports the use of the LANG, LC_ALL, LC_COLLATE, LC_CTYPE,
LC_MESSAGES, and NLSPATH environment variables.
EXAMPLES
1.
To summarize the differences between the files in two directories, enter:
dircmp proj.ver1 proj.ver2
This command displays a summary of the differences between the directories proj.ver1
and proj.ver2. The summary lists separately the files found only in one directory or the
other, and those found in both. If a file is found in both directories, that file is listed. If
the files are identical, dircmp displays identical; otherwise, dircmp displays different.
2.
To show the details of the differences between files, enter:
dircmp -d -s proj.ver1 proj.ver2
The -s flag suppresses information about identical files. The -d flag displays a diff listing
for each of the differing files found in both directories.
NOTES
In most cases, diff -r, rather than dircmp, is preferred.
EXIT VALUES
The following exit values are returned:
0 (zero)
The command completed successfully.
&gt;0
An error occurred.
RELATED INFORMATION
Commands: cmp(1), diff(1).
3−14
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
dircmp(1)
STANDARDS CONFORMANCE
This command conforms to the XPG4 Version 2 specification with extensions.
527188-024
Hewlett Packard Enterprise
3−15
dirname(1)
OSS Shell and Utilities Reference Manual
NAME
dirname - Returns specified parts of pathnames
SYNOPSIS
dirname string
DESCRIPTION
The dirname command reads the string specified on the command line, deletes from the last
/ (slash) to the end of the line, and writes the remaining pathname to standard output.
The dirname command is generally used inside command substitutions within a shell procedure
to specify an output filename that is some variation of a specified input filename.
EXAMPLES
1.
To construct the name of a file located in the same directory as another, enter:
AOUTFILE=‘dirname $TEXTFILE‘/a.out
This command sets the AOUTFILE shell variable to the name of an a.out file in the
same directory as TEXTFILE. If TEXTFILE is /u/fran/prog.c, then the value of dirname $TEXTFILE is /u/fran, and AOUTFILE becomes /u/fran/a.out.
RELATED INFORMATION
Commands: basename(1), sh(1).
3−16
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
dspcat(1)
NAME
dspcat - Displays all or part of a message catalog
SYNOPSIS
dspcat [-g] catalog_name
[set_number [message_number] ]
FLAGS
-g
formats the output so that it can be used as input to the gencat utility. You cannot use the message_number operand with the -g flag.
Operands
catalog_name identifies a file containing a message catalog. If you omit this operand, dspcat
searches for the message catalog in the set of directories specified by the
NLSPATH environment variable.
set_number
specifies a set in the catalog.
message_number
specifies a message in the set. You cannot use the message_number operand
with the -g flag. You must specify set_number if you specify message_number.
DESCRIPTION
The dspcat utility displays all or part of a message catalog. If you include all three operands,
dspcat displays the specified message. If you do not include message_number, dspcat displays
all the messages in the set. If you specify only catalog_name, dspcat displays all messages in
the catalog. If you specify an invalid message_number or an invalid set_number, dspcatdisplays
an error message.
Environment Variables
These environment variables affect the execution of the dspcat utility: LANG, LC_ALL,
LC_CTYPE, LC_MESSAGES, and NLSPATH.
EXAMPLES
To display message number 2 in set number 1 of test.cat, enter:
dspcat test.cat 1 2
DIAGNOSTICS
The dspcat utility generates these errors:
Usage: dspcat [-g] catname [set#] [msg#]
dspcat: Invalid set number.\n
No message id allowed with -g option.
dspcat: Invalid set number.\n
dspcat: Invalid msg number.\n
Usage: dspcat [-g] catname [set#] [msg#]
Unable to open specified catalog \%d set(s).\n
dspcat: Invalid set - catalog only has \%d set(s).\n
dspcat: Invalid set - set \%d not found.\n
dspcat: Invalid message - message \%d not found.\n
RELATED INFORMATION
Commands: gencat(1), mkcatdefs(1).
527188-024
Hewlett Packard Enterprise
3−17
dspcat(1)
OSS Shell and Utilities Reference Manual
STANDARDS CONFORMANCE
The dspcat utility is an Hewlett Packard Enterprise extension to the XPG4 Version 2
specification.
3−18
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
dspmsg(1)
NAME
dspmsg - Writes a message from a message catalog to standard output
SYNOPSIS
dspmsg [-s set_number]
catalog_name
message_number
[ ’default_message’ ]
[argument . . . ]
FLAGS
-s set_number specifies a set in the message catalog; the default set number is 1, if not specified
by -s set_number.
Operands
catalog_name specifies the message catalog.
message_number
specifies the message to be written to standard output.
default_message
specifies the message to be written if dspmsg cannot find the specified message;
default_message is optional.
argument
supplies optional arguments to substitute into the message catalog or into the
default message; there is no limit to the number of arguments.
DESCRIPTION
The dspmsg utility writes a message from a message catalog to standard output. You must
specify the message catalog (catalog_name) and the message (message_number) to be written.
You can specify the set number with the -s flag, or let dspmsg default to set number 1.
The dspmsg utility allows an unlimited number of string arguments for substituting into the
specified message if it contains either the %s or the %n$s printf() function conversion
specifications.
If dspmsg cannot find the specified message it writes the optionally specified default_message.
If dspmsg cannot find the specified message and you do not supply a default, a system-generated
error message is written. You must enclose the default message in single quotes if you are using
the %n$s notation for message inserts.
You can follow the default message with optional arguments to substitute into the catalog message or the default message. Missing arguments for conversion specifications are replaced by
null strings.
Environment Variables
These environment variables affect the execution of the dspmsg utility: LANG, LC_ALL,
LC_CTYPE, LC_MESSAGES, NLSPATH.
EXAMPLES
To display the set number 1, message number 2, of the catalog test.cat, enter:
dspmsg -s 1 test.cat 2 ’Message not found’
If you have not assigned message text to message number 2, dspmsg displays the default message Message not found.
527188-024
Hewlett Packard Enterprise
3−19
dspmsg(1)
OSS Shell and Utilities Reference Manual
DIAGNOSTICS
The dspmsg utility generates these errors:
\nNone or all arguments must use \%n$ format
\n$ missing from \%n$ format
\nNone or all arguments must use \%n$ format
\nInvalid argument index
\nInvalid format specifier
RELATED INFORMATION
Commands: gencat(1), mkcatdefs(1).
STANDARDS CONFORMANCE
The dspmsg utility is an Hewlett Packard Enterprise extension to the XPG4 Version 2
specification.
3−20
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
du(1)
NAME
du - Displays a summary of disk usage
SYNOPSIS
du [-a | -s] [-klrx] [-Wuser=username] [file ...]
FLAGS
-a
Displays disk use for each file. Without -a, du does not report on files, unless they are
listed on the command line.
-k
Displays the file sizes in units of 1024 bytes, instead of the default 512-byte units.
-l
Allocates blocks, in files with multiple links, evenly among the links. By default, a file
with two or more links is counted only once.
-r
Displays an error message when du encounters an inaccessible directory, or an inaccessible file when used with -a. This is the default action.
-s
Displays only the grand total for each of the specified files, but not for any subdirectories.
-x
When evaluating file sizes, evaluates only those files that have the same device as the
file specified by file. In other words, du does not cross mount points.
When two flags are mutually exclusive (such as -a and -s), the last flag you enter on the command line takes precedence.
Hewlett Packard Enterprise extension
-Wuser=username
Specifies that only the files or directories owned by that user are listed.
DESCRIPTION
The du command displays the number of blocks in all directories (listed recursively) within each
specified directory. When the -a flag is specified, du reports the number of blocks in individual
files. The block count includes the indirect blocks of each file and is in 512-byte units, independent of the cluster size used by the system. If no file or directory name is provided, the du command uses the current directory.
The size of the file space allocated to a directory is defined as the sum total of the space allocated
to all files in the file hierarchy rooted in the directory, plus the space allocated to the directory
itself.
Environment Variables
This command supports the use of the LANG, LC_ALL, LC_CTYPE, LC_MESSAGES, and
NLSPATH environment variables.
EXAMPLES
1.
To display the disk usage of a directory tree and each of its subtrees, enter:
du /u/fran
This displays the number of disk blocks in the /u/fran directory and each of its subdirectories.
2.
To display the disk usage of each file, enter:
du -a /u/fran
This displays the number of disk blocks contained in each file and subdirectory of
/u/fran. The number shown beside a directory name is the disk usage of that directory
tree. The number shown beside the name of a regular file is the disk usage of that file
527188-024
Hewlett Packard Enterprise
3−21
du(1)
OSS Shell and Utilities Reference Manual
alone.
3.
To display only the total disk usage of a directory tree, enter:
du -s /u/fran
This displays only the sum total disk usage of /u/fran and the files it contains (-s).
4.
To display only total disk usage used by user grp.ram of a directory tree, enter:
du -s -Wuser=grp.ram /u/fran
NOTES
If too many files are distinctly linked, du counts the excess files more than once.
When du cannot execute the stat( ) function on files or cannot read or execute stat( ) on directories, it reports an error condition and the final exit status is affected. Files with multiple links
are counted and written for only one entry.
EXIT VALUES
The du command returns the following values:
0 (zero)
The command completed successfully.
&gt;0
An error occurred.
RELATED INFORMATION
Commands: df(1), ls(1).
STANDARDS CONFORMANCE
This command conforms to the XPG4 Version 2 specification with extensions.
The following features are Hewlett Packard Enterprise extensions to the XPG4 Version 2
specification:
•
3−22
The -l and -Wuser flags are supported.
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
echo(1)
NAME
echo - Writes arguments to standard output
SYNOPSIS
echo [string ...]
DESCRIPTION
The echo command writes the string specified by the string argument to the standard output file.
The arguments are separated by spaces, and a newline character follows the last string. Use echo
to produce diagnostic messages in command files and to send data into a pipe. If there are no
arguments, echo outputs a newline character.
The echo command recognizes the following special characters:
\a
Displays an alert character.
\b
Displays a backspace character.
\c
Suppresses the newline character. All characters following \c in the arguments are
ignored.
\f
Displays a formfeed character.
\n
Displays a newline character.
\r
Displays a carriage-return character.
\t
Displays a tab character.
\v
Displays a vertical tab character.
\\
Displays a backslash character.
\number Displays an 8-bit character whose value is the 0-, 1-, 2-, or 3-digit octal number given
by the number argument. The first digit of number must be a 0 (zero).
EXAMPLES
1.
To write a message to standard output, enter:
echo Please insert diskette . . .
2.
To display a message containing special characters as listed in DESCRIPTION, enclose
the message in quotes, as follows:
echo &quot;\n\n\nI’m at lunch.\nI’ll be back at 1 p.m.&quot;
This command skips three lines and displays the messages:
I’m at lunch.
I’ll be back at 1 p.m.
Note that you must enclose the message in quotation marks if it contains escape
sequences such as \n. Otherwise, the shell treats the \ (backslash) as an escape character.
The previous command line, entered without the quotation marks, results in the following output:
nnnI’m at lunch.nI’ll be back at 1 p.m.
3.
To use echo with pattern-matching characters, enter:
echo The back-up files are: *.bak
527188-024
Hewlett Packard Enterprise
3−23
echo(1)
OSS Shell and Utilities Reference Manual
This command displays the message The back-up files are: and then displays the
filenames in the current directory ending with .bak.
4.
To add a single line of text to a file, enter:
echo Remember to set the shell search path to $PATH. &gt;&gt;notes
This command adds the message to the end of the file notes after the shell substitutes the
value of the PATH shell variable.
5.
To write a message to the standard error output (shell built-in command only), enter:
echo Error: file already exists. &gt;&amp;2
Use this command in shell procedures to write error messages. If the &gt;&amp;2 is omitted,
then the message is written to the standard output file.
NOTES
The OSS echo command has both a shell built-in version and a regular version. The two versions
have the same features and functionality. The only difference between the two versions is that
the shell built-in version does not start a new shell process when it is invoked. Both versions are
described in the reference page for echo. The shell built-in version is the default. To specify the
regular version, use the full pathname: /bin/echo For more information about shell built-in commands, refer to the reference page for sh(1).
RELATED INFORMATION
Commands: sh(1).
3−24
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
ecobol(1)
NAME
ecobol - Compiles TNS/E native COBOL programs
SYNOPSIS
ecobol
[-c | -Wnolink ]
[-g ]
[-L directory ] ...
[-l library ] ...
[-O [optlevel ] ]
[-o outfile ]
[-s ]
[-Wansistreams ]
[-Wcall_shared | -Wshared ]
[-WBdllsonly | -WBdynamic | -WBstatic ]
[-Wcobol=&quot;arg[,... ]&quot; ]
[-Wcodecov ]
[-Wcolumns=n ]
[-Wcopylib=pathname1 ]
[-Wdryrun ]
[-Weld=&quot;arg[,... ]&quot; ]
[-Weld_obey=&quot;pathname2&quot; ]
[-Werrors=n ]
[-Wglobalized ]
[-Wheap=n[b | w | p ]
[-Whelp | -Wusage ]
[-Whighpin={on | off} ]
[-Whighrequesters={on | off} ]
[-W[no]include_whole ]
[-W[no]innerlist ]
[-W[no]inspect ]
[-Wlines=n ]
[-W[no]list ]
[-W[no]map ]
[-Wmigration_check ]
[-WmoduleCatalog=&quot;catalog_spec&quot; ]
[-WmoduleGroup[=&quot;[group_spec]&quot; ] ]
[-WmoduleSchema=&quot;schema_spec&quot; ]
[-WmoduleTableSet[=&quot;[tableset_spec]&quot; ] ]
[-WmoduleVersion[=&quot;[version_spec]&quot; ] ]
[-Wmxcmp[=&quot;arg[,... ]&quot; ] ]
[-Wmxcmp_add=&quot;arg[,... ]&quot; ]
[-Wmxcmp_files=&quot;file[,...]&quot; ]
[-Wmxcmp_querydefault=&quot;attr_name=attr_value[,...]&quot; ]
[-Wnostdlib ]
[-Woptimize=n ]
[-W[no]optional_lib ]
[-Wr ]
[-W[no]reexport ]
[-Wrunnamed ]
[-W[no]saveabend ]
[-Wsavetemps ]
[-Wsettog=n[, n ] ... ]
[-Wsql[=&quot;arg[,... ]&quot; ] ]
527188-024
Hewlett Packard Enterprise
3−25
ecobol(1)
OSS Shell and Utilities Reference Manual
[-Wsqlcomp[=&quot;arg[,... ]&quot; ] ]
[-Wsqlmx[=&quot;arg[,... ]&quot; ] ]
[-Wsqlmxadd=&quot;arg[,... ]&quot; ]
[-W[no]suppress ]
[-Wstandard={1985 | 2002 } ]
[-Wsyntax ]
[-Wsystype={guardian | oss} ]
[-Wtimestamp=value ]
[-Wu=&quot;symbol_name&quot; ]
[-Wv ]
[-Wverbose ]
[-Ww ]
[-Wx ]
operand ...
FLAGS
-c | -Wnolink
Performs compilation of the specified source files but suppresses the linking
phase. This flag does not delete any object files that are produced.
For source files of the form file.cbl, creates object files with names of the form
file.o in the current directory.
Use this flag when an SQL compiler is to be invoked without having to rebuild the
executable file.
-g
Produces symbols information for symbolic debugging in the object or executable
files.
-L directory
Changes the algorithm for searching the libraries named in the -l flags to look in
the directory named by the directory pathname before looking in the default directories /lib, /usr/lib, and /usr/local/lib. Directories named in -L options are
searched in the order specified.
The order of specifying the -l and -L flags is significant. If the -L flag is specified,
it should be specified before specifying any of the following flags, to affect the
processing of -l flags related to those flags:
-WBdllsonly, -WBdynamic, or -WBstatic
-Wshared
-l library
Specifies the filename of a library file to be used for linking. This flag can be
specified more than once in a command line and is normally used following
specification of -WBdllsonly, -WBdynamic, -WBstatic, or -Wshared.
In static linking mode, specifying this flag instructs the linker to search for the
library named liblibrary.a. In dynamic linking mode, specifying this flag instructs
the linker to search for the library named liblibrary.dll or liblibrary.so; if
liblibrary.dll or liblibrary.so is not found, use liblibrary.a.
The position of -l library operands within a list of flags affects the order in which
libraries are searched.
The order of specifying the -l and -L flags is also significant. If the -L flag is
specified, it should be specified before specifying any of the following flags, to
affect the processing of -l flags related to those flags:
-WBdllsonly, -WBdynamic, or -WBstatic
-Wshared
3−26
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
ecobol(1)
-O [ optlevel ] Specifies the optimization level to be used for the program file using one of the
following values:
0
Disables optimization. This level is useful when you are developing and debugging your program. Hewlett Packard Enterprise
recommends this level for serious debugging.
1
Enables optimizations that still allow most symbolic debugging
features to work.
2 or no optlevel value
Enables all optimizations. Symbolic debugging capability is limited. This is the default.
If you specify both the -O and -Woptimize flags on the command line, the last
flag is used. If neither flag is specified, the default optimization level is 1.
-o outfile
Uses the pathname outfile instead of the default pathname for the output file produced.
-s
Strips symbolic and other information not required for proper execution from
object and executable files. If both the -g and -s flags are used, symbolic information is kept in the object files but is stripped from the executable file. Do not
specify the -s and -Wsql flags in the same ecobol invocation.
-Wansistreams
Generates a program that opens text files as file code 180 files instead of file code
101 (EDIT) files when a program is compiled for the Guardian environment and
includes C or C++ modules compiled with the c89 or c99 flag
-Wsystype=guardian. (By default Guardian C or C++ modules open text files as
file code 101 files.) This flag is ignored if -Wsystype=oss is specified. OSS C or
C++ modules can open text files only as file code 180 files.
-WBdllsonly | -WBdynamic | -WBstatic
Specifies the type of linking to be performed:
-WBdllsonly
Specifies that the eld linker should limit searches to positionindependent code (PIC) files that are dynamic-link libraries
(DLLs) when resolving the file names specified for the -l and -L
flags.
If a file name is qualified, eld searches for a DLL with that name.
If a filename is unqualified, in each search path, eld first searches
for a DLL with the file name as specified in the -l or -L flag. If
eld cannot find a DLL, the file name is unqualified, and the search
path is not in the Guardian file system (/G), then eld prefixes lib
and suffixes .so to the file name and searches again. If eld still
cannot find the DLL, it searches the path again with the same
prefix but with .dll as the suffix. For more information on search
paths, see the Finding Libraries subsection of the eld(1) reference page under DESCRIPTION.
When a DLL cannot be found, eld issues an error message unless
its -allow_missing_libs flag is specified.
The -WBdllsonly, -WBdynamic, and -WBstatic flags are search
control toggles. Multiple flags can be specified in a single eld
invocation; the behavior specified remains in effect until another
527188-024
Hewlett Packard Enterprise
3−27
ecobol(1)
OSS Shell and Utilities Reference Manual
flag in the set is specified. Thus, you can search for both DLLs
and archive files for some -l and -L flags and search for just
archive files for others. The default library search control is
-WBdynamic.
-WBdynamic Specifies that the linker utility should use dynamic linking when
searching for libraries specified in subsequent operands of the
form -l library. Dynamic linking is in effect until a -WBstatic
flag is specified. -WBdynamic is the default setting. Refer to the
Differences Between Dynamic and Static Linking subsection
for details.
-WBstatic
Specifies that the linker utility should use static linking when
searching for libraries specified in subsequent operands of the
form -l library. Static linking is in effect until a -WBdynamic
flag is specified. -WBdynamic, not -WBstatic, is the default setting. Refer to the Differences Between Dynamic and Static
Linking subsection for details.
You cannot use these flags if you use the -c or -Wnolink flag.
-Wcall_shared | -Wshared
Specifies the kind of linked file that should be created:
-Wcall_shared Directs the compiler to create a position-independent code (PIC)
program loadfile using the eld linker. If you also specify the -c or
-Wnolink flag, the file created is a PIC linkfile instead.
This is the default behavior.
-Wshared
Directs the compiler to create a PIC dynamic-link library (DLL)
using the eld linker.
-Wcobol=&quot;arg[,... ]&quot;
Passes to the ECOBOL compiler the directives in the argument string enclosed in
quotation marks. If more than one value is specified, they must be separated by
commas or semicolons. This string follows any directives generated by other
flags. If you repeat this flag, arguments are passed to the compiler in the order
specified.
Valid values for arg are the Guardian directives that are passed to the Guardian
ECOBOL command.
-Wcodecov
Directs the compiler to create an instrumented object file and to create or add to
an existing SPI file.
The first time the -Wcodecov flag is used to compile a program, the compiler
creates a Static Profiling Information (SPI) file. This file is one of the input files
for the Code Coverage tool. If the program is compiled in an OSS directory:
3−28
•
The default name for the SPI file is pgopti.spi.
•
If the default file is not write-accessible, the name of the SPI file created is
tpopti.spi.
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
ecobol(1)
•
A lock file called pgopti.spl. When compilation is complete, the compiler
deletes this file.
If the program is compiled in a Guardian directory:
•
The default name for the SPI file is pgospi.
•
If the default file is not write-accessible, the name of the SPI file created is
tpgospi.
•
A lock file called pgospl. When compilation is complete, the compiler
deletes this file.
If the SPI file already exists when the program is compiled with the -Wcodecov
flag, the compiler updates or adds information to the existing SPI file. If more
than one SPI file exists for the same program, you must concatenate the files
manually before you can use the resulting file as input to the Code Coverage Tool.
For more information about the Code Coverage Tool, see the Code Coverage Tool
Reference Manual.
-Wcolumns=n Sets the maximum number of columns for an input file to n, where n is a number in
the range 12 through 32767. If n is greater than 132, 132 is used. The compiler
ignores text in columns beyond n. This flag is ignored if you specify Wcobol=&quot;ANSI&quot;.
-Wcopylib=&quot;pathname1&quot;
Specifies pathname1 as the source file to use as the default COPY library for any
COPY statement in the source program that does not specify a library. If you
repeat this flag, the last file specified is the default COPY library. The default is to
look for a file called COPYLIB in the current working directory.
-Wdryrun
Verifies the syntax and semantics of the flags and operands that were specified and
enables the -Wv flag. No compilation system components are run.
-Weld=&quot;arg[,... ]&quot;
Passes to the eld utility the directives in the argument string enclosed in quotation
marks after any other arguments are passed. If more than one value is specified,
they must be separated by commas without any white space. If you repeat this
flag, arguments are passed to the eld utility in the order specified.
This flag is ignored when linking is suppressed.
-Weld_obey=&quot;pathname2&quot;
Passes pathname2 (a file of eld utility commands) to the eld utility.
This flag is ignored when linking is suppressed.
-Werrors=n
Stops compiling when n errors have been encountered.
-Wglobalized Specifies that the code generated by the compiler is preemptable. By default,
compilers generate code that is not preemptable. Preemptable code allows named
references in a DLL to resolve to externally-defined code and data items instead
of to resolve to its own internally-defined code and data items. Preemptable code
is less efficient than code that is not preemptable, and is only needed in a few
instances when creating a DLL.
527188-024
Hewlett Packard Enterprise
3−29
ecobol(1)
OSS Shell and Utilities Reference Manual
-Wheap=n[b | w | p ]
Specifies the value that the linker should use for the HEAP_MAX attribute of the
output file. n can be any positive hexadecimal value that gives a size valid for the
NonStop server node on which the file is used. The size can be specified in units
of:
b
Bytes; this is the default unit
w
Words
p
Pages
-Whelp | -Wusage
Displays information on how to run the ecobol utility. No compilation system
components are run.
-Whighpin={on | off }
Directs the linker to set the HIGHPIN attribute to on or off in the output object
files. This attribute specifies whether the object file will run at a high PIN or a low
PIN.
If the program is compiled for execution in the Guardian environment, the default
setting is -Whighpin=off. If the program is compiled for execution in the OSS
environment, the default setting is -Whighpin=on. This flag is set only if an executable object file is produced.
-Whighrequesters={on | off }
Directs the linker to set the HIGHREQUESTERS attribute to on or off in the output object file. This attribute specifies whether the object file supports requests
from requesters running at a high PIN.
The object file must contain a COBOL main program. If the COBOL main program was compiled with the ecobol -Wsystype=guardian flag set, the default setting is -Whighrequesters=off. If the COBOL main program was compiled with
the ecobol -Wsystype=oss flag set, the default setting is -Whighrequesters=on.
This flag is set only if an executable object file is produced.
-W[no]include_whole
Tells the eld linker whether to include in the loadfile all linkable archive members
of all archive libraries encountered after this flag is specified.
Specifying -Winclude_whole begins this linking action. When
-Wnoinclude_whole behavior is in effect, archive searches are controlled by the
existence of undefined symbols. Archives are searched in the order specified on
the command line. Symbols are marked as undefined by compilers or by the user
through the -Wu flag or the eld linker -u flag. When an archive member is found
that resolves an undefined symbol, the member&acute;s symbols are merged into the
external symbol table for the loadfile being created. After the merge, the
undefined symbol that triggered the merge is resolved (marked as defined). The
same merge might resolve other undefined symbols or result in more undefined
symbols.
You can stop the linking action of -Winclude_whole by specifying the
-Wnoinclude_whole flag later in the command line or an obey file.
These flags can be specified as many times as needed in the command stream.
Providing either flag overrides the current setting, so that the linker actions can be
controlled on a library-by-library basis.
3−30
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
ecobol(1)
The default setting is -Wnoinclude_whole.
-W[no]innerlist
Enables [disables] the generation of instruction code mnemonics in the compiler
listing immediately following each corresponding statement. This flag works only
if the -Wnosuppress flag is specified. The default is -Wnoinnerlist.
-W[no]inspect Designates [does not designate] the symbolic debugger as the default debugger for
the output object file. Use this flag with the -g flag. The default setting is
-Wnoinspect. This flag is set only if an executable object file is produced.
-Wlines=n
Sets the maximum number of lines on a listing page to n, if a listing is generated.
n is a number in the range 10 through 32767. The default value is 60.
-W[no]list
Temporarily enables [disables] the generation of the compiler listing. This flag
works only if the -Wnosuppress flag is specified. The default is -Wlist.
-W[no]map
Temporarily enables [disables] the generation of identifier maps in the compiler
listing. This flag works only if the -Wnosuppress flag is specified. The default is
-Wnomap.
-Wmigration_check
When used with the -Wstandard=1985 flag, causes the compiler to issue a warning
message when it encounters a user-defined COBOL word that is a reserved word
in the COBOL-2002 standard. The default is not to issue migration warning messages.
-WmoduleCatalog=&quot;catalog_spec&quot;
Specifies a NonStop SQL/MX module catalog name. The specified string is used
only if the input file does not contain an SQL/MX module directive or its module
directive does not specify a catalog name. The string cannot contain more than
128 characters.
This flag is valid only for preprocessor release 2.0 and newer.
-WmoduleGroup[=&quot;[group_spec]&quot; ]
Specifies a string for a module group specification to use as a prefix to the module
name. The specified string is used only if the input file does not contain an
SQL/MX module directive or its module directive does not specify a group name.
The string cannot contain more than 31 characters.
This flag is valid only for preprocessor release 1.8 and newer.
-WmoduleSchema=&quot;schema_spec&quot;
Specifies a NonStop SQL/MX module schema name. The specified string is used
only if the input file does not contain an SQL/MX module directive or its module
directive does not specify a schema name. The string cannot contain more than
128 characters.
This flag is valid only for preprocessor version 2.0 and newer.
-WmoduleTableSet[=&quot;[tableset_spec]&quot; ]
Specifies a string for a tableset specification to use as the first suffix to the module
name. The specified string is used only if the input file does not contain an
SQL/MX module directive or its module directive does not specify a tableset
name The string cannot contain more than 31 characters.
This flag is valid only for preprocessor version 1.8 and newer.
527188-024
Hewlett Packard Enterprise
3−31
ecobol(1)
OSS Shell and Utilities Reference Manual
-WmoduleVersion[=&quot;[version_spec]&quot; ]
Specifies a string for a tableset specification to use as the second suffix to the
externally qualified module name that is written to the module file. The string
cannot contain more than 31 characters.
This flag is valid only for preprocessor release 1.8 and newer.
-Wmxcmp[=&quot;arg[,... ]&quot; ]
Invokes the NonStop SQL/MX compiler after the NonStop SQL/MX preprocessor
is invoked.
If a value is supplied for arg, it must be one of the following:
replace
Directs the NonStop SQL/MX compiler to replace the existing
module or create a new one. The default action does not replace
an existing module.
warn
Directs the NonStop SQL/MX compiler to generate a warning
rather than an error if a table does not exist at compilation time.
verbose
Directs the NonStop SQL/MX compiler to display summary information as well as error and warning messages.
If the -Wmxcmp flag is specified more than once, only the last occurrence has an
effect. If the -Wmxcmp flag is specified without the -Wsqlmx flag, and if a file
specified for operand has a name of the form file.m, that file is passed to the NonStop SQL/MX compiler.
If the -Wmxcmp flag is specified, you cannot use the -Wsql or -Wsqlcomp flag.
The -Wmxcmp flag is ignored when a flag, such as -Wsyntax, that prevents compilation is specified.
-Wmxcmp_add=&quot;arg[,... ]&quot;
Specifies a string to pass to the NonStop SQL/MX compiler without validation or
change. If more than one value is specified, they must be separated by commas
without any white space.
-Wmxcmp_files=&quot;file[,...]&quot;
Passes MDF files specified to mxcmp in release 1 compilation mode. Passes all
specified files without the .m extension to mxCompileUserModule in release 2
compilation mode.
-Wmxcmp_querydefault=&quot;attr_name=attr_value[,...]&quot;
Specifies attribute settings (CONTROL QUERY DEFAULT settings) to pass to
the NonStop SQL/MX compiler. These attribute settings override any
corresponding entries in the SYSTEM_DEFAULTS table.
-Wnostdlib
Suppresses the searching of the standard library directories to locate libraries for
any C or C++ modules in the program. Refer to the Standard Library Directories subsection of the c89 or c99 reference page for details.
-Woptimize=n Specifies the optimization level. n is one of the following:
0
3−32
Disables optimization. This level is useful when you are developing and debugging your program. Hewlett PAckard Enterprise
recommends this level for serious debugging.
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
ecobol(1)
1
Enables optimizations that still allow most symbolic debugging
features to work. This is the default.
2
Enables all optimizations. Symbolic debugging capability is limited. The -O flag is equivalent to -Woptimize=2.
-W[no]optional_lib
Indicates whether a library specified in the command stream should be considered
optional when the eld linker creates a loadfile.
When -Wnooptional_lib behavior is in effect, any library specified in a -l or -lib
flag is included in the .liblist section of the loadfile being created. When
-Woptional_lib behavior is in effect, a specified library can be omitted from the
.liblist section of the loadfile being created if omitting it would not affect how
symbolic references are resolved.
These flags can be specified as many times as needed in the command stream.
Providing either flag overrides the current setting, so that the linker actions can be
controlled on a library-by-library basis.
If a library is specified more than once, and at least one specification occurs when
-Wnooptional_lib is in effect, the library is included in the .liblist section of the
loadfile being created.
The default behavior is -Wnooptional_lib.
-Wr
Passes the -r option to the linker, which directs the linker to create a linkable
object file instead of an executable object file (the default).
-W[no]reexport
Tells the eld linker whether to mark any library specified in an -l or -L flag after
this flag for reexport in its libList entry in the loadfile being created. Specifying
-Wnoreexport leaves the library unmarked; specifying -Wreexport marks the
library. Reexport is a run-time attribute that is used by the rld loader to decide
what DLLs it needs to load.
-Wnoreexport is the default action.
These flags can be specified as many times as needed in the command stream.
Providing either flag overrides the current setting, so that the linker actions can be
controlled on a library-by-library basis.
-Wrunnamed Directs the linker to set the RUNNAMED ON attribute in the current object file.
This attribute specifies that the object file runs as a named process. The default is
RUNNAMED OFF.
-W[no]saveabend
Specifies that a process snapshot (saveabend) file is [not] created if the program
terminates abnormally. The default is -Wnosaveabend.
-Wsavetemps Saves all temporary and intermediate files created by compilation system components. Use the -Wv flag to display the filenames.
-Wsettog=n[, n ] ...
Specifies a numeric toggle in the range 1 through 15 that is defined only during the
NonStop SQL/MX preprocessing step. See the HPE NonStop SQL/MX Programming Manual for C and COBOL for details about the NonStop SQL/MX -d toggle
option.
All -Wsettog values that are supplied to ecobol are automatically passed as -d
527188-024
Hewlett Packard Enterprise
3−33
ecobol(1)
OSS Shell and Utilities Reference Manual
options to the NonStop SQL/MX preprocessor. The -d options control the processing of ?IF directives by the preprocessor; the options do not pass ?SETTOG
directives to the ECOBOL compiler.
This flag is ignored unless the -Wsqlmx flag is also specified. This flag can be
specified more than once.
-Wsql[=&quot;arg[,... ]&quot; ]
Enables NonStop SQL/MP support when processing COBOL source files, using
the arguments in the argument string enclosed in quotation marks. If more than
one value is specified, they must be separated by commas without any white
space. Refer to the NonStop SQL/MP Programming Manual for COBOL for a
description of the arguments that can be passed to the NonStop SQL/MP compiler.
If no errors occur, -Wsql also runs the SQLCOMP compiler after the link step.
If you specify the -Wsql flag, you cannot use the -s, -Wmxcmp, or -Wsqlmx flag.
-Wsqlcomp[=&quot;arg[,... ]&quot; ]
Runs the NonStop SQL/MP SQLCOMP compiler after the link step, using the
arguments specified. If more than one value is specified, they must be separated
by commas without any white space.
If you specify the -Wsqlcomp flag, you cannot use the -Wmxcmp or -Wsqlmx
flag.
-Wsqlmx[=&quot;arg[,... ]&quot; ]
Invokes the NonStop SQL/MX mxsqlco preprocessor, using the arguments
specified. If an arg value is specified, it must be one of the following; if more than
one value is specified, they must be separated by commas without any white
space:
ansi_format
Directs the preprocessor to assume ANSI fixed format for the
source file that it reads.
double_quotes Directs the preprocessor to accept SQL string literals delimited by
double quotes in addition to literals delimited by single quotes.
listing
Directs the preprocessor to write its diagnostic messages to a file
named file.eL, where file is the name of the primary source file.
preprocess_only
Directs the preprocessor to suppress all steps after preprocessing.
This option is valid only for preprocessor release 2.0 and newer.
refrain_r2
Directs the SQL/MX preprocessor to use only the rules and
features that apply to preprocessors prior to release 2.0. The
default action is to use only the rules and features that apply to
preprocessors beginning with release 2.0.
This option is valid only for preprocessor release 2.0 and newer.
If you specify the -Wsqlmx flag, you cannot use the -Wsql or -Wsqlcomp flag.
-Wsqlmxadd=&quot;arg[,... ]&quot;
Specifies a string to pass to the SQL/MX preprocessor without validation or
change. If more than one value is specified, they must be separated by commas
without any white space.
3−34
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
ecobol(1)
-W[no]suppress
Disables [enables] the generation of identifier maps in the compiler listing. The
compiler listing is written to standard output. The default is -Wsuppress.
-Wstandard={1985 | 2002 }
Specifies the COBOL standard the compiler should use. The default is 1985,
which specifies that the compiler follow the COBOL-1985 standard. When 2002
is specified, the compiler reserves all the COBOL words that are reserved words
in the COBOL-2002 standard. The compiler does not support all COBOL-2002
features. For a list of the features supported, see the COBOL Manual for TNS/E
Programs.
-Wsyntax
Checks the syntax of the source program, but does not generate any code.
-Wsystype={guardian | oss }
Specifies the target execution environment. This flag selects definitions used during compilation, program startup code, default libraries, and system routines used
during linking. The default setting is -Wsystype=oss. (To run files compiled for a
Guardian target execution environment, you must set the file code to 800 with a
FUP ALTER filename, CODE 800 command from a TACL prompt.)
-Wtimestamp=value
Provides a creation timestamp for the NonStop SQL/MX preprocessor that is written to the two output files created by the preprocessor. See the HPE NonStop
SQL/MX Programming Manual for C and COBOL for details about the formats
allowed for value. If this flag is specified more than once, only the last occurrence
has an effect. Note that ecobol does not check that value is valid; it relies on the
NonStop SQL/MX preprocessor to validate this argument.
This flag is ignored unless the -Wsqlmx flag is also specified.
-Wu=&quot;symbol_name&quot;
Tells the eld linker to add symbol_name as an undefined symbol. This causes eld
to search for this symbol in any archive libraries that are specified after this flag
on the command line or in an obey file.
The search constraint specified by the -Wu flag is overridden by use of the
-Winclude_whole flag.
-Wv
Echoes to the standard error file the command line as each component of the compilation system is run.
-Wverbose
Displays detailed information from the ECOBOL compiler and linker utility.
-Ww
Suppresses the printing of compiler warning messages.
-Wx
Strips part of the symbol table from the output object file, but keeps information
necessary for the object file to be used as input to the linker utility.
Do not include a space before or after the = (equal sign).
Quotation marks around string values in flags are optional but recommended to avoid errors
caused by shell substitutions or deletions.
527188-024
Hewlett Packard Enterprise
3−35
ecobol(1)
OSS Shell and Utilities Reference Manual
DESCRIPTION
The ecobol utility is the interface to the ECOBOL compilation system.
ecobol performs simple validation of the flags and operands on its command line and, depending
on those items, invokes components of the language compilation system. ecobol does not verify
the existence of files it passes to compilation system components. It does verify that operand
identifies valid files to pass to compilation system components. ecobol and the components it runs
issue messages to the standard error file.
ecobol performs the following steps:
1.
If the -Wsqlmx flag is specified, invokes the NonStop SQL/MX preprocessor to preprocess any COBOL source files that contain embedded NonStop SQL/MX statements to
create either of the following:
•
COBOL source files with module definitions (using the release 2 module management method)
•
COBOL-only source files and module definition files (MDFs) (using the release 1
module management method)
2.
Compiles any specified COBOL source files or source files produced by Step 1 into object
files.
3.
If the -Wmxcmp flag is specified, invokes the NonStop SQL/MX compiler to compile any
module definitions or MDFs.
4.
Links the object files together with any libraries specified on the command line. This step
occurs if no flags that prevent linking (such as -c or -Wnolink) are specified and if the
source files are compiled without errors.
5.
If the -Wsqlcomp flag is specified, invokes the NonStop SQL/MP compiler to process any
embedded NonStop SQL/MP statements in files created by Step 1 or specified in the command.
6.
Writes an executable object file or dynamic link library (DLL) specified by the -o flag (if
present) or to the file a.out.
The files specified in the operand list are operated on by the appropriate program components of
the compilation system, depending on the command line flags and the type of file operands.
If the -c flag is specified, then for all pathname operands of the form file.cbl, the files $(basename
pathname.c).o are created as the result of successful compilation.
If -c is not specified, the object files created after successful compilation are combined by the link
operation into a program file, dynamic-link library (DLL), or user library. When linking is performed and either the -Wsqlmx or -Wmxcmp flag is specified, the list of libraries searched
automatically includes zclidll. Object files created are not deleted after successful generation of
the executable program file.
The executable file is created according to OSS file creation rules, except that the file permissions
are set to S_IRWXO | S_IRWXG | S_IRWXU and the bits specified by the umask value of the
process are cleared.
Hewlett Packard Enterprise extensions
The -W flags are specific to hewlett Packard Enterprise to support the Hewlett Packard Enterprise
compilation environment. The argument strings within these flags are passed to the program components unchanged, along with default argument strings and argument strings corresponding to
ecobol command line flags meaningful to the program components. Do not specify conflicting
instructions in -W flag argument strings or ecobol command line flags. The results of conflicting
3−36
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
ecobol(1)
instructions are undefined.
Operands
An operand is a pathname. At least one pathname must be specified. The following operands are
supported:
file.a
A library of object files typically produced by the ar command, and passed
directly to the linker utility.
file.cbl
A COBOL language source file to be compiled and optionally linked. Embedded
NonStop SQL/MP information might be present.
file.cob
A COBOL language source file to be compiled and optionally linked. Embedded
NonStop SQL/MP information might be present.
file.ECBL
A COBOL language source file that contains embedded NonStop SQL/MX statements to be compiled and optionally linked.
file.ecbl
A COBOL language source file that contains embedded NonStop SQL/MX statements to be compiled and optionally linked.
file.ECOB
A COBOL language source file that contains embedded NonStop SQL/MX statements to be compiled and optionally linked.
file.ecob
A COBOL language source file that contains embedded NonStop SQL/MX statements to be compiled and optionally linked.
file.m
A module definition file (MDF) containing NonStop SQL/MX information for a
corresponding COBOL source file.
file.o
An object file produced by a previous ECOBOL compilation, to be passed directly
to the linker utility.
Input Files
Input files are one of the following:
•
A text file containing a COBOL language source program
•
An object file in the format produced by the command ecobol -c
•
A library of object files in the format produced by archiving zero or more object files using
the ar command
•
A library of object files produced by the eld utility
When -Wsqlmx is specified, ecobol uses the source file extension to determine whether a file
requires preprocessing and the names of the source files created by the NonStop SQL/MX preprocessor. The name of the source file created is the name of the primary source file with the following transformation to the file extension:
•
527188-024
Each source file with the extension .ecbl or .ecob is given to the mxsqlco program for
preprocessing. The resulting source files have the extensions .cbl and .m, where the file
named file.cbl contains the COBOL source to be compiled and the file named file.m contains the corresponding module definition file (MDF).
Hewlett Packard Enterprise
3−37
ecobol(1)
OSS Shell and Utilities Reference Manual
•
Source files with the extensions .cbl or .cob are not given to the mxsqlco program; these
files are assumed to contain no embedded SQL statements.
Files created by the NonStop SQL/MX preprocessor overwrite any existing files with the same
name in the current working directory.
Output Files
Output files are object files, executable files, log files, NonStop SQL/MX module definition files
created by the NonStop SQL/MX preprocessor, or all four. Log files have names of the form
file.eL. Module definition files have names of the form file.m.
Standard Output
The standard output file is a text file that contains the compiler listing, if generated.
Standard Error
The standard error file is used for diagnostic and informational messages. If more than one file
operand is specified, then for each such file, &quot;%s: \n&quot;,file might be written. These messages
precede the processing of each input file.
Environment Variables
The following environment variables affect the execution of ecobol. The ecobol utility and its
program components do not support locale variables.
COMP_ROOT
Changes the default pathnames for the ecobol compilation system components. In
the OSS environment, the string specified in COMP_ROOT is added to the
beginning of the default pathnames. If a component’s environment variable is set
explicitly, the COMP_ROOT environment variable does not modify the
component’s environment variable.
ECOBFE
Determines the pathname of the ecobol compiler. /G/system/system/ecobfe is the
default.
ELD
Determines the pathname of the eld utility invoked by ecobol. /usr/bin/eld is the
default location for the OSS environment.
MXCMP
Determines the pathname of the NonStop SQL/MX release 1 compiler.
/G/system/system/mxcmp is the default.
MXCMPUM Determines the pathname of the NonStop SQL/MX release 2 compiler.
/usr/tandem/sqlmx/bin/mxCompileUserModule is the default.
MXSQLCO
Determines the pathname of the NonStop SQL/MX preprocessor, mxsqlco.
/usr/tandem/sqlmx/bin/mxsqlco is the default.
SQLCOMP
Determines the pathname of the NonStop SQL/MP compiler invoked by ecobol.
/G/system/system/sqlcomp is the default.
SQLCIO
Determines the pathname of the object file for the NonStop SQL/MX application
program interface to the ECOBOL compiler. /usr/tandem/lib/sqlci.o is the
default.
SQLMX_PREPROCESSOR_VERSION
Indicates the preprocessor rules and features to be used. Specifying the value 800
causes rules and features associated with release 1.8 to be used; the mxcmp compiler is used and only MDF files and annotated source files are produced, while
rules and features associated with release 2.0 and later are ignored. Specifying a
value of 1200 or larger or not specifying a value causes rules and features associated with release 2.0 and later to be used; the mxCompileUserModule compiler
3−38
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
ecobol(1)
is used and annotated source files that contain embedded module definitions are
produced instead of MDF files, while restrictions associated with release 1.8 or
earlier are ignored.
TMPDIR
Determines the pathname that overrides the default directory for temporary files
created by ecobol and components it invokes. By default, temporary files are
stored in the /tmp directory. If TMPDIR is set to a directory that does not exist
or is not writable, ecobol uses the default directory as described on the tempnam(3) reference page.
Processes
With the exception of the ECOBFE and SQLCOMP processes, which is invoked as a Guardian
process, all components are invoked as OSS processes.
Standard Libraries
The following libraries are available for COBOL programs in the OSS environment.
-l cob
Contains COBOL library and utility routines described in the COBOL Manual for
TNS/E Programs.
-l cre
Contains C run-time library routines.
-l cli
Contains SQL/MX support routines.
In the absence of flags that inhibit invocation of a linker utility, such as -c or -Wnolink, ecobol
passes -l cob and -l cre operands to the linker utility, causing the COBOL and CRE libraries to be
searched. If the -Wsqlmx or -Wmxcmp flags are present, ecobol also passes a -l cli operand to
the linker utility, causing the SQL/MX support library to be searched.
If you want the libraries to be searched in a specific order or you want linking options to be processed in a specific order, you should invoke the linker using the eld command from the OSS shell
and not use ecobol to do the linking.
Differences Between Static and Dynamic Linking
The -WBdllsonly and -WBdynamic operands specify dynamic linking. The -WBstatic operand
specifies static linking.
In dynamic linking, the eld utility first searches for a dynamic-link library (DLL). If a DLL cannot
be found, the linker utility searches for an archive file. If no archive file can be found, an error is
issued.
In static linking, the linker utility searches for an archive file but does not search for a DLL. If the
archive file cannot be found, an error is issued.
Dynamic and static linking are not exact opposites. Dynamic linking accepts either a DDL or an
archive file, but static linking accepts only an archive file.
Unlike ecobol flags, multiple -WBdllsonly, -WBdynamic, and -WBstatic operands can be
specified in a single ecobol invocation; thus, it is possible to perform dynamic linking for some -l
operands and static linking for others.
-WBdllsonly, -WBdynamic and -WBstatic operands specified to ecobol are temporarily overridden by linking arguments specified in the -Weld or-Weld_obey flags.
Refer to the eld(1) reference page for more information.
527188-024
Hewlett Packard Enterprise
3−39
ecobol(1)
OSS Shell and Utilities Reference Manual
Using the c89 or c99 and ecobol Utilities
OSS COBOL programs can contain COBOL modules and C modules. Compile COBOL modules
using the ecobol utility and C modules using the c89 or the c99 utility. To produce a program containing COBOL and C modules, first compile all the modules written in either COBOL or C. You
can also link these modules together or with other libraries at this time, but do not SQL-compile
the modules. After you have compiled all the modules of one language, compile the modules written in the other language, specifying any necessary linking or SQL-compiling options.
For example, to produce an executable object file made up of COBOL modules cobol1.cbl and
cobol2.cbl and C modules c1.c and c2.c, you can first run the C compiler using the c89 utility
with:
c89 -c -o cprog.o c1.c c2.c
This command directs c89 to compile the two modules but not link them. The output object file is
cprog.o.
You can then invoke the ecobol utility to compile the two COBOL modules and link the ECOBOL
compiler output with the previously produced C object file and the standard C library to produce
the executable object myprog with:
ecobol -o myprog cprog.o cobol1.cbl cobol2.cbl
Refer to the C/C++ Programmer’s Guide and the Open System Services Programmer’s Guide for
details on writing and compiling C programs in the OSS environment.
EXAMPLES
1.
The command
ecobol test1.cbl
compiles the source file test1.cbl and links the object file into a program file a.out.
2.
The command
ecobol -c test1.cbl
compiles the source file test1.cbl into an object file test1.o.
3.
The command
ecobol -g -o test2 x.cbl y.cbl z.cbl
compiles source files x.cbl, y.cbl, and z.cbl and links the object files into a program file
test2. Symbolic information is generated by the compiler and retained by the linker utility
for debugging.
4.
The command
ecobol -o xyz -Wsqlmx x.o y.o z.o
links the object files x.o, y.o, and z.o into a program file xyz. The NonStop SQL/MX compiler is then invoked to compile xyz.
5.
The command
ecobol -Wnolink -Wsql=&quot;catalog \$abc.def&quot; xyz
invokes the NonStop SQL/MP compiler, sqlcomp, on program file xyz without going
through the linking process. In addition to the input filename xyz, the catalog option is
passed to the NonStop SQL/MP compiler.
3−40
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
6.
ecobol(1)
The command
ecobol -o testprog -L .
-L /usr/test/lib testprog.cbl -l tdm
compiles the COBOL language source program testprog.cbl and links the object file with
the library specified in the -l operand. It also links the object file with a DLL, if found. If
a DLL is not found, it uses the standard C run-time library. The eld utility produces a program file named testprog.
By default, dynamic linking is selected. ecobol searches directories for the library tdm
specified by the -l flag in the following order and selects the first copy found:
7.
libtdm.so
in the current directory (-L .)
libtdm.a
in the current directory (-L .)
libtdm.so
in /usr/test/lib (-L /usr/test/lib)
libtdm.a
in /usr/test/lib (-L /usr/test/lib)
libtdm.so
in /lib (by default)
libtdm.a
in /lib (by default)
libtdm.so
in /nonnative/usr/lib (by default)
libtdm.a
in /nonnative/usr/lib (by default)
libtdm.so
in /usr/lib (by default)
libtdm.a
in /usr/lib (by default)
libtdm.so
in /usr/local/lib (by default)
libtdm.a
in /usr/local/lib (by default)
The command
ecobol -Wsqlmx -Wmxcmp -o sqlprog.exe sqlprog.ecbl
processes the single COBOL module named sqlprog.ecbl containing embedded NonStop
SQL/MX statements using the release 2 compilation method as follows:
8.
a.
The NonStop SQL/MX preprocessor is invoked to process the source file. The
preprocessor creates the file sqlprog.cbl. The file sqlprog.cbl is the COBOL-only
equivalent of sqlprog.ecbl; that is, the preprocessor translates all embedded NonStop SQL/MX statements to the appropriate COBOL code.
b.
If no errors occurred in Step a, the ECOBOL compiler processes the file
sqlprog.cbl to create the file sqlprog.o.
c.
If no errors occurred in Step b, the NonStop SQL/MX compiler is invoked to process the module definitions.
d.
If no errors occurred in Step c, eld is invoked to link the file sqlprog.o with the
standard COBOL library and produces the executable file sqlprog.exe.
The command
ecobol -c -Wsqlmx file1.ecob file2.ecob file3.ecob
preprocesses the three specified files and also compiles them, but does not link the resulting object files. Using the release 2 module management method, if no errors are detected
during either preprocessing or compilation, the following files are created: file1.cob,
527188-024
Hewlett Packard Enterprise
3−41
ecobol(1)
OSS Shell and Utilities Reference Manual
file2.cob, file3.cob, file1.o, file2.o, and file3.o.
9.
The command
ecobol -c -Wsqlmx file1.cbl file2.ecbl file3.ecob file4.cob
mixes COBOL source files with and without embedded NonStop SQL/MX statements.
All files are compiled but not linked. Using the release 2 module management method, if
no errors are detected during either preprocessing or compilation, the following files are
created: file2.cob, file3.cob, file1.o, file2.o, file3.o, file4.o.
10. The command
ecobol -Wmxcmp -Wmxcmp_files=&quot;test1.m,test1.o&quot;
SQL-compiles the MDF file test1.m using the NonStop SQL/MX mxcmp compiler and
processes the file test1.o using the NonStop SQL/MX mxCompileUserModule without
also linking it.
DIAGNOSTICS
If ecobol encounters a compilation error that prevents an object file from being created, it writes a
diagnostic message to the standard error file and continues to compile other source code operands;
however, it does not perform program linking and returns a nonzero exit status. If the linking is
unsuccessful, cobol writes a diagnostic message to the standard error file and returns a nonzero
exit status.
EXIT VALUES
The following exit values are returned:
0
Successful completion.
&gt;0
An error occurred.
RELATED INFORMATION
Commands: ar(1), c89(1), c99(1), eld(1), nmcobol(1), strip(1).
Functions: tempnam(3).
STANDARDS CONFORMANCE
The ecobol utility is an Hewlett Packard Enterprise extension to the XPG4 Version 2 specification.
3−42
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
ed(1)
NAME
ed - Edits a file line by line
SYNOPSIS
ed [-p string] [-s] [file]
The ed command invokes a line-editing program that works on one file at a time by copying it into
a temporary edit buffer and making changes to that copy.
FLAGS
-p string Sets the ed prompt to string. The default value for string is null (no prompt).
-s
Suppresses byte counts that the editor displays with the e, E, r, and w subcommands,
suppresses diagnostic messages for the e, E, and q subcommands, and suppresses the !
(exclamation point) prompt after a !system_command. The same things are suppressed
when you call ed with a filename.
Note that if you quit without writing the file, you do not get an error message. (Generally, before ending the program, the q subcommand checks to determine whether the
buffer was written to a file since the last time it was changed. If not, q displays the ?
message.)
DESCRIPTION
The ed command does not alter the file itself until you use the write subcommand. You can
specify on the command line the file you want to edit, or you can use ed subcommands to read a
file into the buffer. When ed reads a new file into the buffer, the contents of that file replace the
buffer’s previous contents, if any.
The ed Modes
The ed program operates in one of two modes, command mode and text mode. In command mode,
ed recognizes and executes subcommands. In text mode, ed adds text to the file buffer, but does
not recognize subcommands. You enter text mode by using the a, c, or i subcommand. To leave
text mode, enter . (dot) alone at the beginning of a line.
Subcommand Syntax
An ed subcommand consists of zero, one, or two addresses, followed by a single-character subcommand, possibly followed by arguments to that subcommand. These addresses specify one or
more lines in the buffer. Because every subcommand has default addresses, you frequently do not
need to specify addresses.
Pattern Matching
The ed command supports a limited form of special pattern-matching characters that you can use
as regular expressions (REs) to construct pattern strings. You can use these patterns in addresses
to specify lines and in some subcommands to specify portions of a line.
For information about regular expressions (REs), see the reference page for the grep command.
Addressing
There are three types of ed addresses: line number addresses, addresses relative to the current
line, and pattern addresses.
The current line is the point of reference in the buffer and is represented by a . (dot). When you
start the ed program, the current line is the last line in the buffer. As you edit a file, the current
line changes to the last line affected by a subcommand. The current line is the default address for
several ed commands. (See SUBCOMMANDS to find out how each subcommand affects the
current line.)
Subcommands for determining and changing the current line are described in the section SUBCOMMANDS. The following are guidelines for constructing addresses:
527188-024
Hewlett Packard Enterprise
3−43
ed(1)
OSS Shell and Utilities Reference Manual
•
. (dot) addresses the current line.
•
$ addresses the last line of the buffer.
•
n addresses the nth line of the buffer.
•
&acute;x addresses the line marked with a lowercase letter, x, by the k subcommand.
•
/pattern/ addresses the next line that contains a matching string. The search begins with
the line after the current line and stops when it finds a match for the pattern. If necessary,
the search moves to the end of the buffer, wraps around to the beginning of the buffer, and
continues until it either finds a match or returns to the current line.
•
?pattern? addresses the previous line that contains a match for the pattern. The ?pattern?
construct, like /pattern/, can search the entire buffer, but it does so in the opposite direction.
•
An address followed by +number or -number specifies an address plus or minus the indicated number of lines. The + (plus sign) is optional.
•
An address that begins with + or - specifies a line relative to the current line. For example,
-5 is the equivalent of .-5 (five lines above the current line).
•
An address that ends with - or + specifies the line immediately before (-) or immediately
after (+) the addressed line. Used alone, the + character addresses the line immediately
before the current line. The + character addresses the line immediately after the current
line; however, the + character is optional. The + and - characters have a cumulative
effect; for example, the address --*O addresses the line two lines above the current line.
•
For convenience, a , (comma) stands for the address pair 1,$ (first line through last line)
and a ; (semicolon) stands for the pair .,$ (current line through last line).
Commands that do not accept addresses regard the presence of an address as an error. Commands
that do accept addresses can use either given or default addresses. When given more addresses
than it accepts, a command uses the last (rightmost) ones.
In most cases, a , (comma) separates addresses (for example 2,8). A ; (semicolon) can also
separate addresses. A ; between addresses causes the ed command to set the current line to the
first address and then calculate the second address (for example, to set the starting line for a search
based on guidelines 5 and 6). In a pair of addresses, the first must be numerically smaller than the
second.
The ed Limits
The following is a list of ed command size limitations:
•
64 bytes per filename.
•
512 bytes per line.
•
256 bytes per global subcommand list.
•
128-kilobyte buffer size. (Note that the buffer not only contains the original file but also
editing information. Each line occupies one word in the buffer.)
The maximum number of lines depends on the amount of memory available to you. The maximum
file size depends on the amount of physical data storage (disk or tape drive) available or on the
maximum number of lines permitted in user memory.
SUBCOMMANDS
3−44
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
ed(1)
In most cases, only one ed subcommand can be entered on a line. The exceptions to this rule are
the n, p, and l subcommands, which can be added to any subcommand except e, E, f, q, Q, r, w, or
!.
The e, E, f, r, and w subcommands accept filenames as arguments. The ed command stores the
last filename used with a subcommand as a default filename. The next e, E, f, r, or w subcommand
given without a filename uses the default filename.
The ed command responds to an error condition with one of two messages: ? (question mark) or
?file. When the ed command receives an INT signal, it displays a ? and returns to command
mode. When ed reads a file, it discards NULL characters and all characters after the last newline
character.
Unless otherwise noted, all subcommands work by default on the current line; an address is
optional. If you specify an address, you do not type the brackets.
When used as an address, a . (dot) refers to the current line. When a . (dot) is shown in the first
position on an otherwise blank line, it terminates text mode and returns to command mode. text
denotes user input in text mode. Note that address need not be a number; it can be a regular
expression of the form /RE/,/RE/ or /RE/;/RE/.
[address]a
text
.
The a (append) subcommand adds text to the buffer after the addressed line. Enter a .
(dot) to return to command mode. The a subcommand sets the current line to the last
inserted line or, if no lines were inserted, to the addressed line. Address 0 causes the a
subcommand to add text to the beginning of the buffer.
[address1,address2]c
text
.
The c (change) subcommand deletes the addressed lines, then replaces them with new
input. Enter a . (dot) to return to command mode. The c subcommand sets the current
line to the last new line of input or, if there were none, to the first line that was not
deleted.
[address1,address2]d
The d (delete) subcommand removes the addressed lines from the buffer. The line after
the last line deleted becomes the current line. If the deleted lines were originally at the
end of the buffer, the new last line becomes the current line.
e file
The e (edit) subcommand first deletes any contents from the buffer, then loads another
file into the buffer, sets the current line to the last line of the buffer, and displays the
number of bytes read in to the buffer. If the buffer was changed since its contents were
last saved (with the w subcommand), e displays ? before it clears the buffer.
The e subcommand stores file as the default filename to be used, if necessary, by subsequent e, E, r, or w subcommands. (See the f subcommand.)
When the ! (exclamation point) character replaces file, e takes the rest of the line as a
shell (sh) command and reads the command output. The e subcommand does not store
the name of the shell command as a default filename.
E file
527188-024
The E (Edit) subcommand works like the e subcommand, with one exception: E does
not check for changes made to the buffer since the last w subcommand.
Hewlett Packard Enterprise
3−45
ed(1)
OSS Shell and Utilities Reference Manual
f [file]
The f (filename) subcommand changes the default filename (the stored name of the last
file used) to file, if file is given. If file is not given, the f subcommand prints the default
filename.
[address1,address2]g/pattern/subcommand_list
The g (global) subcommand first marks every line that matches the pattern. Then, for
each marked line, this subcommand sets the current line to that line and executes
subcommand_list. Place a single subcommand, or the first subcommand of a list, on the
same line with the g subcommand; place subsequent subcommands on separate lines.
Except for the last line, end each of these lines with a \ (backslash).
The subcommand_list can include the a, i, and c subcommands and their input. If the
last command in subcommand_list is normally the . (dot) that ends input mode, the .
(dot) is optional. If there is no subcommand_list, the ed subcommand displays the
current line. The subcommand_list cannot include the g, G, v, V, or ! subcommands.
The g subcommand is similar to the v subcommand, which executes subcommand_list
for every line that does not contain a match for the pattern. Note that the g subcommand
defaults to the entire file, not to the current line.
[address1,address2]G/pattern/
The interactive G (Global) subcommand first marks every line that matches the pattern,
then displays the first marked line, sets the current line to that line, and waits for a subcommand. G accepts any but the following ed subcommands: a, c, g, G, i, v, V, and !.
After the subcommand finishes, G displays the next marked line, and so on. G takes a
newline character as a null subcommand. &amp; (ampersand) causes G to execute the previous subcommand again, if there is one. Note that subcommands executed within the G
subcommand can address and change any lines in the buffer. The G subcommand can
be terminated by pressing the Interrupt key sequence. Note that this subcommand
defaults to the entire file, not to the current line.
h
The h (help) subcommand displays a short message that explains the reason for the most
recent ? notification. The current line number is unchanged.
H
The H (Help) subcommand causes the ed command to enter a mode in which help messages (see the h subcommand) are displayed for all subsequent ? notifications. The H
subcommand toggles this mode, and it is initially set to &quot;off.&quot; The current line number is
unchanged.
[address]i
text
.
The i (insert) subcommand inserts text before the addressed line and sets the current line
to the last inserted line. Enter . (dot) to return to command mode. If no lines are
inserted, i sets the current line to the addressed line. This subcommand differs from the
a subcommand only in the placement of the input text. Address 0 is not legal for the i
subcommand.
[address1,address1+1]j
The j (join) subcommand joins contiguous lines by removing the intervening newline
characters. If given only one address, j does nothing. (For splitting lines, see the s subcommand.) Note that lines that exceed the line length limit cannot be joined. If lines
are joined, the current line number is set to the address of the joined line; otherwise, the
current line number is unchanged.
[address]kx
The k (mark) subcommand marks the addressed line with name x, which must be a
3−46
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
ed(1)
lowercase letter. The address ’x (single quotation mark before the marking character)
then addresses this line. The k subcommand does not change the current line. Note that
marks attached to lines are deleted with the line.
[address1,address2]l
The l (list) subcommand displays the addressed lines. The l subcommand wraps long
lines and, unlike the p subcommand, represents nonprinting characters as 3-digit octal
numbers with a \ (backslash) preceding each byte in the character. The following characters, however, are written as escape sequences:
\\
Backslash
\a
Alert
\b
Backspace
\f
Formfeed
\n
Newline
\r
Carriage return
\t
Tab
\v
Vertical tab
A $ (dollar sign) character is placed at the end of each line so that a real (literal) $ at the
end of a line cannot be misinterpreted.
An l subcommand can be appended to any ed subcommand except e, E, f, q, Q, r, w, or
!.
[address1,address2]maddress3
The m (move) subcommand repositions the addressed lines. The first moved line follows the line addressed by address3. Address 0 for address3 causes m to move the
addressed lines to the beginning of the file. The line specified by address3 cannot be
one of the lines to be moved. The m subcommand sets the current line to the last moved
line.
[address1,address2]n
The n (number) subcommand displays the addressed lines, each preceded by its line
number and a tab character (displayed as spaces); the n subcommand leaves the current
line at the last line displayed. An n subcommand can be appended to any ed subcommand except e, E, f, q, Q, r, w, or !.
[address1,address2]p
The p (print) subcommand displays the addressed lines and sets the current line to the
last line displayed. A p subcommand can be appended to any ed subcommand except e,
E, f, q, Q, r, w, or !. For example, the subcommand dp deletes the current line and
displays the new current line.
P
The P (Prompt) subcommand turns the ed prompt string * or the string specified by the p flag on or off. Initially, P is off.
q
The q (quit) subcommand exits the ed program. Before ending the program, q checks to
determine whether the buffer was written to a file since the last time it was changed. If
not, q displays the ? message. Note that you do not get more than one prompt in a row;
a second consecutive q quits the ed program without displaying a prompt.
527188-024
Hewlett Packard Enterprise
3−47
ed(1)
OSS Shell and Utilities Reference Manual
Q
The Q (Quit) subcommand exits the ed program without checking for changes to the
buffer since the last w subcommand (compare with the q subcommand).
[address]r file
The r (read) subcommand reads a file into the buffer after the addressed line; r does not
delete the previous contents of the buffer. When entered without file, r reads the default
file, if any, into the buffer (see the e and f subcommands). r does not change the default
filename. Address 0 causes r to read a file in at the beginning of the buffer. After it
reads a file successfully, r displays the number of bytes read into the buffer and sets the
current line to the last line read.
If ! (exclamation point) replaces file in a r subcommand, r takes the rest of the line as an
OSS shell (sh) command whose output is to be read. The r subcommand does not store
the names of shell commands as default filenames.
[address1,address2]s/pattern/replacement/flags
The s (substitute) subcommand searches each addressed line for a string that matches the
pattern and then replaces the string with the specified replacement string. Without a
number n or the global indicator g, s replaces only the first matching string on each
addressed line. With n, s replaces the nth occurrence of pattern on the addressed line.
With the g indicator, s replaces every occurrence of the matching string on each
addressed line.
If s does not find a match for the pattern, it returns the error message ?. Any character
except a space or a newline character can separate (delimit) the pattern and replacement
arguments. The s subcommand sets the current line to the last line changed.
An &amp; (ampersand) in the replacement string is a special symbol that has the same value
as the pattern string. So, for example, the subcommand s/out/&amp;ing/ has the same effect
as the subcommand s/out/outing/ and replaces out with outing on the current line. A
backslash before the ampersand (\&amp;) removes this special meaning of &amp; in replacement.
The % (percent sign), when used by itself as replacement, causes s to use the previous
replacement again. The % character does not have this special meaning if it is part of a
longer replacement or if it is preceded by a \ (backslash).
Lines can be split by substituting newline characters into them. In replacement, the
sequence \&lt;Return&gt; quotes the newline character (not displayed) and moves the cursor
to the next line for the remainder of the string.
The value of flags can be the following:
count
Substitutes for the countth occurrence only of the regular expression that is
found on each addressed line.
g
Substitutes globally for all nonoverlapping instances of the regular expression,
instead of just substituting for the first instance.
l
Displays the final line in which a substitution was made in the format specified
for the l subcommand.
n
Displays the final line in which a substitution was made in the format specified
for the n subcommand.
p
Displays the final line in which a substitution was made in the format specified
for the p subcommand.
[address1,address2]taddress3
The t (transfer) subcommand inserts a copy of the addressed lines after address3. The t
3−48
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
ed(1)
subcommand accepts address 0 (for inserting lines at the beginning of the buffer). The t
subcommand sets the current line to the last line copied.
u
The u (undo) subcommand restores the buffer to the state it was in before it was last
modified by an ed subcommand. The subcommands that u can undo are a, c, d, g, G, i, j,
m, r, s, t, u, v, and V. All changes made to the buffer by a g, G, v, or V global subcommand are undone as a single change. The current line number is set to the value it had
before the command being undone started.
[address1,address2]v/pattern/subcommand_list
The v subcommand executes the subcommands in subcommand_list for each line that
does not contain a match for the pattern. The v subcommand is a complement for the
global subcommand g, which executes subcommand_list for every line that does contain
a match for the pattern.
[address1,address2]V/pattern/
The V subcommand first marks every line that does not match the pattern, then displays
the first marked line, sets the current line to that line, and waits for a subcommand. The
V subcommand complements the G subcommand, which marks the lines that do match
the pattern.
[address1,address2]w file
The w (write) subcommand copies the addressed lines from the buffer to the file named
in file. If the file does not exist, the w subcommand creates it with permission mode 666
(read and write permission for everyone), unless the umask command setting specifies
another file creation mode. (For information about file permissions, see the description
of the builtin command umask in the reference page for sh and the reference page for
the chmod command.)
The w subcommand does not change the default filename (unless file is the first filename
used since you invoked ed). If you do not provide a filename, ed uses the default
filename, if any (see the e, E, and f subcommands). The w subcommand does not
change the current line.
If the ed command successfully writes the file, it displays the number of characters written. When ! (exclamation point) replaces file, ed takes the rest of the line as a shell (sh)
command whose output is to be read; w does not save shell command names as default
filenames (the same effect as !). The use of the write subcommand with ! (exclamation
point) is not considered the last w subcommand that wrote the entire buffer. Thus, this
alone does not prevent the warning to the user if an attempt is made to destroy the editor
buffer through the e or q subcommands.
The address 0 is not a legal address for the w subcommand. Therefore, it is not possible
to create an empty file with the ed command.
[address]=
Without an address, the = (equal sign) subcommand displays the current line number.
With the address $, = (equal sign) displays the number of the last line in the buffer. The
= subcommand does not change the current line and cannot be included in a g or v subcommand list.
!system_command
The ! (exclamation point) subcommand allows system commands to be run from within
the ed program. Anything following ! on an ed subcommand line is interpreted as a system command. Within the text of that command string, ed replaces the unescaped character %with the current filename, if there is one.
When the ! is used as the first character of a shell command (after the ! that runs a
527188-024
Hewlett Packard Enterprise
3−49
ed(1)
OSS Shell and Utilities Reference Manual
subshell), the ed command replaces the ! character with the previous system command;
for example, the command !! repeats the previous system command. If the command
interpreter (the sh command) expands the command string, ed echoes the expanded line.
The ! subcommand does not change the current line. If any replacements of % or ! are
performed, the modified line is written to the standard output file before the command is
executed.
number
+number
-number The ed command interprets a number alone on a line as an address and displays the
addressed line. Addresses can be absolute (line numbers or $) or relative to the current
line (+number or -number). Entering a newline character (a blank line) is equivalent to
+1p and is useful for stepping forward through the buffer one line at a time.
EXIT VALUES
The ed editor returns a value of 0 (zero) if execution is successfully completed; if an error occurs,
a value greater than 0 (zero) is returned.
RELATED INFORMATION
Commands: chmod(1), edit(1), grep(1), sed(1), sh(1), stty(1), vi(1).
Functions: regexp(3).
3−50
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
egrep(1)
NAME
egrep - Searches a file for a pattern that is a full regular expression
SYNOPSIS
egrep
[-c | -l]
[-bhinqsvx]
{ pattern ... | -e pattern ... | -f pattern_file ... }
[file ... ]
FLAGS
While most flags can be combined, some combinations result in one flag overriding another. For
example, if you specify both the -n and -l flags, the output includes only filenames (as specified by
the -l flag) and thus does not include line numbers (as specified by the -n flag).
-b
Precedes each line by the block number of the block in which it was found. Use this flag
to help find disk block numbers by context.
-c
Displays only a count of matching lines.
-e pattern ...
Specifies a pattern. This flag works the same as a simple pattern but is useful when the
pattern begins with a - (dash).
-f pattern_file ...
Specifies a file that contains patterns. Each pattern terminates with a newline character.
-h
Suppresses reporting of filenames when multiple files are processed.
-i
Ignores the case of letters in locating pattern; that is, uppercase and lowercase letters in
the input are considered to be identical.
-l
Lists the name of each file that has lines matching pattern. Each filename is listed only
once; filenames are separated by newline characters.
-n
Precedes each line with its relative line number in the file.
-q
Suppresses all output except error messages. This flag is useful for easily determining
whether a pattern or string exists in a group of files. When searching several files, it provides a performance improvement, because it can quit as soon as it finds the first match,
and it requires less care by the user in choosing the set of files to supply as arguments,
because it exits with a 0 (zero) exit status if it detects a match, even if the egrep command detected an access or read error on earlier file arguments.
-s
Suppresses error messages about inaccessible files.
-v
Displays all lines except those that match the specified pattern. This flag is useful for
filtering unwanted lines out of a file.
-x
Displays lines that match the pattern exactly with no additional characters.
DESCRIPTION
The egrep command searches the specified files (the standard input file by default) for lines containing characters that match the specified pattern and then write matching lines to the standard
output file.
The egrep command is an obsolescent version of the command grep -E, which searches for patterns that are full regular expressions, except for \( and \), and with the addition of the following
rules:
527188-024
Hewlett Packard Enterprise
3−51
egrep(1)
OSS Shell and Utilities Reference Manual
•
A regular expression followed by a + (plus sign) matches one or more occurrences of the
regular expression.
•
A regular expression followed by a ? (question mark) matches zero or one occurrence of
the regular expression.
•
Two regular expressions separated by a | (vertical bar) or by a newline character match
either expression.
•
A regular expression can be enclosed in ( ) (parentheses) for grouping.
The order of precedence of operators is as follows:
•
[= =] [: :] [. .] (collation-related bracket symbols)
•
\&lt;special_character&gt; (escaped characters)
•
[ ] (bracket expressions)
•
( ) (grouping)
•
* + ? {m, n} (single-character-ERE duplication)
•
concatenation
•
ˆ $ (anchoring)
•
| (alternation)
Regular Expressions (REs)
Regular expressions (REs) cannot contain newline characters, because these signal a new pattern.
The following REs match a single character:
character
An ordinary character (one other than one of the special pattern-matching characters)
matches itself.
.
A . (dot) matches any single character except the newline character.
[string] A string enclosed in [ ] (brackets) matches any one character in that string. In addition,
certain pattern-matching characters have special meanings within brackets:
^
If the first character of string is a ˆ (circumflex), the RE [ˆstring] matches any
character except the characters in string and the newline character. A ˆ has
this special meaning only if it occurs first in the string.
-
You can use a - (dash) to indicate a range of consecutive characters. The characters that fall within a range are determined by the current collating
sequence, which is defined by the LC_COLLATE environment variable. For
example, [a-d] is equivalent to [abcd] in the traditional ASCII collating
sequence.
A range can include a multicharacter collating element enclosed within
bracket-period delimiters ([. .]). The bracket-period delimiters in the RE syntax distinguish multicharacter collating elements from a list of the individual
characters that make up the element.
A collating sequence can define equivalence classes for characters. An
equivalence class is a set of collating elements that all sort to the same primary
location. They are enclosed within bracket-equal delimiters ([= =]). An
3−52
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
egrep(1)
equivalence class generally is designed to deal with primary-secondary sorting. For example, if e, &egrave;, and &ecirc; belong to the same equivalence class, then
[[=e=]fg], [[=&egrave;=]fg], and [[=&ecirc;=]fg] are each equivalent to [e&egrave;&ecirc;fg].
The - (dash) character loses its special meaning if it occurs first ([-string]), if it
immediately follows an initial circumflex ([ˆ-string]), or if it appears last
([string-]) in the string.
]
When the ] (right bracket) is the first character in the string ([]string]) or when
it immediately follows an initial circumflex ([ˆ]string]), it is treated as a part of
the string rather than as the string terminator.
\special_character
A \ (backslash) followed by a special pattern-matching character matches the special
character itself (as a literal character). These special pattern-matching characters are as
follows:
[: :]
.*[\
Always special, except when they appear within [ ] (brackets).
^
Special at the beginning of an entire pattern or when it immediately follows
the left bracket of a pair of brackets ([ˆ...]).
$
Special at the end of an entire pattern.
A character class name enclosed in bracket-colon delimiters matches any of the set of
characters in the named class. Members of each of the sets are determined by the current
setting of the LC_CTYPE environment variable. The supported classes are alpha,
upper, lower, digit, xdigit, space, print, punct, graph, and cntrl. Here is an example
of how to specify one of these classes:
[[:lower:]]
This matches any lowercase character for the current locale.
Forming Patterns
The following rules describe how to form patterns from REs:
•
An RE that consists of a single, ordinary character matches that same character in a string.
•
An RE followed by an * (asterisk) matches zero or more occurrences of the character that
the RE matches. For example, the following pattern:
ab*cd
matches each of the following strings:
acd
abcd
abbcd
abbbcd
but not the following string:
abd
If there is any choice, the leftmost longest matching string is chosen. For example, given
the following string:
122333444
the pattern .* matches 122333444, the pattern .*3 matches 122333, and the pattern .*2
527188-024
Hewlett Packard Enterprise
3−53
egrep(1)
OSS Shell and Utilities Reference Manual
matches 122.
•
An RE followed by:
\{number\}
Matches exactly number occurrences of the character matched by the RE.
\{number,\}
Matches at least number occurrences of the character matched by the RE.
\{number1,number2\}
Matches any number of occurrences of the character matched by the RE from
number1 to number2, inclusive.
The values of number1 and number2 must be integers in the range 0 through
255. Whenever a choice exists, this pattern matches as many occurrences as
possible.
Note that if number is 0 (zero), pattern matches zero occurrences of pattern. For
example:
$ echo abc | grep ’aX\{0\}bX\{0\}cX\{0\}’
abc
$
•
You can combine REs into patterns that match strings containing the same sequence of
characters. For example, AB*CD matches the string ABCD, and [A-Za-z]*[0-9]*
matches any string that contains any combination of ASCII alphabetic characters (including none), followed by any combination of numerals (including none).
•
The character sequence \(pattern\) matches pattern and saves it into a numbered holding
space. Using this sequence, up to nine patterns can be saved on a line. Counting from left
to right on the line, the first pattern saved is placed in the first holding space, the second
pattern saved is placed in the second holding space, and so on.
The character sequence \n matches the nth saved pattern, which is placed in the nth holding space. (The value of n is an integer in the range 1 through 9.) Thus, the following pattern:
\(A\)\(B\)C\2\1
matches the string ABCBA. You can nest patterns to be saved in holding spaces.
Whether the enclosed patterns are nested or in a series, \n refers to the nth occurrence,
counting from the left, of the delimiting characters, \).
Restricting What Patterns Match
A pattern can be restricted to match either from the beginning of a line, up to the end of the line, or
the entire line:
3−54
•
A ˆ (circumflex) at the beginning of a pattern causes the pattern to match only a string that
begins in the first character position on a line.
•
A $ (dollar sign) at the end of a pattern causes that pattern to match only if the last
matched character is the last character (not including the newline character) on a line.
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
•
egrep(1)
The construction ˆpattern$ restricts the pattern to matching only an entire line.
EXAMPLES
1.
To display all lines in a file that begin with an ASCII letter, enter:
egrep ’ˆ[a-zA-Z]’ pgm.s
2.
To display all lines that contain ASCII letters in parentheses or digits in parentheses (with
spaces optionally preceding and following the letters or digits), but not letter-digit combinations in parentheses, enter:
egrep \
’\( *([a-zA-Z]*⏐
⏐[0-9]*) *\)’ my.txt
This command displays lines in my.txt such as (y) or ( 783902), but not (alpha19c).
3.
To display all lines that do not match a pattern, enter:
egrep -v ’ˆ#’
This displays all lines that do not begin with a # (number sign).
4.
To display all lines that contain uppercase characters, enter:
w
egrep ’[[:upper:]]’ pgm.s
EXIT VALUES
The egrep command returns the following exit values:
0 (zero) A match was found.
1
No match was found.
2
A syntax error occurred or a file was inaccessible, even if matches were found.
RELATED INFORMATION
Commands: ed(1), ex(1), grep(1), sed(1), sh(1).
Files: locale(4).
STANDARDS CONFORMANCE
This command conforms to the XPG4 Version 2 specification.
The following features are Hewlett Packard Enterprise extensions to the XPG4 Version 2
specification:
•
527188-024
The -b, -h, -q, and -x flags are supported.
Hewlett Packard Enterprise
3−55
eld(1)
OSS Shell and Utilities Reference Manual
NAME
eld - Runs the TNS/E native linker utility for position-independent code
SYNOPSIS
eld
[ -alf filename1 ]
[ { -all | -include_whole }
| { -no_include_whole | -none } ]
[ -allow_duplicate_procs ]
[ -allow_missing_libs ]
[ -allow_multiple_mains ]
[ -ansistreams ]
[ -bdllsonly | -bdynamic | -bstatic ]
[ -bglobalized ]
[ -blocalized ]
[ -bsymbolic | -bsemi_globalized ]
[ -call_shared | { -dll | -shared } | -r ]
[ -change attribute_name attribute_value filename3 ]
[ -check_registry filename4 ]
[ -cross_dll_cleanup ]
[ -d address1 ]
[ -data_resident ]
[ { -dllname | -soname } DLL_name ]
[ -e symbol_name1 ]
[ { -export | -exported_symbol } symbol_name2 ]
[ -export_all ]
[ { -export_not | -hidden_symbol } symbol_name3 ]
[ -first_l pathname1 ]
[ { -fl | -obey } location1 ]
[ -grow_data_amount number1 ]
[ -grow_text_amount number2 ]
[ -grow_limit number3 ]
[ -grow_percent number4 ]
[ -import_lib filename5 ]
[ -import_lib_stripped filename6 ]
[ -instance_data keyword ]
[ { -l | -lib } filename7 ]
[ { -L | -libvol } pathname2 ]
[ -libname Guardian_filename ]
[ -limit_runtime_paths ]
[ -local_libname filename8 ]
[ -m | -map ]
[ -make_implicit_lib ]
[ -make_import_lib filename9 ]
[ -must_preset ]
[ -must_use_iname ]
[ -must_use_oname ]
[ -must_use_rname ]
[ -no_optional_lib | -optional_lib ]
[ -no_reexport | -reexport ]
[ -nostdfiles | -no_stdfiles ]
[ -nostdlib | -no_stdlib ]
[ -noverbose | -no_verbose ]
[ -NS_extent_size extent-size ]
3−56
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
eld(1)
[ -NS_max_extents max_extents ]
[ -o filename10 ]
[ -noverbose | -no_verbose ]
[ -public_registry filename11 ]
[ -rename old_name new_name ]
[ { -rld_l | -rpath } path_list1 ]
[ -rld_first_l path_list2 ]
[ { -s | -x } ]
[ -set attribute_name attribute_value ]
[ -show_multiple_defs ]
[ -stdin ]
[ -strip filename12 ]
[ -t address2 ]
[ -temp_i filename13 ]
[ -temp_o filename14 ]
[ -temp_r filename15 ]
[ -u symbol_name4 ]
[ -ul ]
[ -unres_symbols { error | ignore | warn } ]
[ -update_code ]
[ -update_registry filename16 ]
[ -verbose ]
[ -warn ]
[ -warn_common ]
[ -y symbol_name5 ]
[ filename17 ] ...
FLAGS
-alf filename1 Tells ld to adjust a load file by rebasing or rebinding the loadfile filename1.
The update timestamp of the new loadfile is set to the current date and time if any
changes are made to the file.
If you do not use the -o flag or if the -o flag specifies the same filename as
filename1, the new loadfile has the same name as the existing loadfile.
The -alf flag resolves symbolic references similar to the way eld resolves them
when it is creating a new loadfile from a set of linkfiles. However, with the -alf
flag, if you do not specify your preference for the treatment of unresolved references with a flag such as -unres_symbols, the default comes from what was
specified for the -set rld_unresolved flag when the loadfile was originally built by
eld.
If you specify the -t flag, the existing loadfile is rebased, which means the
addresses of the symbols defined within the loadfile are updated. Otherwise,
rebasing is not performed. Whether you specify the -t or not, the loadfile is
rebound, which means that external references from this loadfile are updated
according to the addresses found within other DLLs.
Flags such as -must_preset have the same meanings as when eld originally
creates a loadfile.
When you use this flag, you can use only the following flags in the same command:
-allow_missing_libs
-check_registry
-first_l
-fl or -obey
527188-024
Hewlett Packard Enterprise
3−57
eld(1)
OSS Shell and Utilities Reference Manual
-L or -libvol
-local_libname
-must_use_oname and -must_use_rname
-must_preset
-nostdlib or -no_stdlib
-noverbose, -no_verbose, -verbose, and -warn
-o
-public_registry
-rld_first_l and -rld_l
-stdin
-t
-temp_o and -temp_r
-unres_symbols
-update_code and -update_registry
{-all | -include_whole } | { -no_include_whole | -none}
The -all and none flags (and their synonyms -include_whole and no_include_whole) are toggles that change how eld behaves as it processes the
command line.
At the beginning of the command line, the default is -none. This means that eld
only looks inside archives to find symbols that have references, but no definition,
at the current location in the command line. Then, eld brings into the link the
object files found within archives that define symbols with no definition.
A symbol has a reference if it is an external reference from an object file that has
occurred earlier on the command line, or that you specified in a -u flag earlier on
the command line.
The -all flag directs eld to bring into the link all the object files within archives.
When an archive member is found that resolves an undefined symbol, that member
is used by eld as if it had been specified as a linkfile in the command line or obey
file. That linkfile might lead to more undefined symbols, more members might be
found in the same archive to resolve them, and so forth.
-allow_duplicate_procs
Tells eld to unconditionally accept multiple copies of a procedure. The only
check made is that all copies of the procedure have the same procedure attributes
(other than the RESIDENT, PRIVILEDGED, or OPT_LEVEL attributes); for
example, it is acceptable if they have different sizes. The first copy of the duplicated procedure is the one that is kept, unless there are both RESIDENT and not
RESIDENT copies; eld always keeps the first RESIDENT copy. When building
an executable file, no space is allocated for the unused copies.
The default action is to accept multiple copies of only procedures specifically
marked as duplicatable by C++.
-allow_missing_libs
Tells eld not to consider it an error when it cannot find an archive or a dynamiclink library (DLL) after searching for the name specified by a -l or -lib flag.
Instead, a warning message is issued and processing continues.
By default, if a search fails to find a DLL or an archive, it is an error.
3−58
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
eld(1)
-allow_multiple_mains
Directs eld not to issue an error message if more than one procedure has the
MAIN attribute. All main procedures are included in the output file. Only the first
procedure having the MAIN attribute is listed as the main entry point in the file
header.
The default action is to report an error when more than one procedure has the
MAIN attribute.
-ansistreams
Specifies that C run-time library functions create files of file code 180 (C text as
binary) instead of file code 101 (EDIT). The type of files created can also be set
with the ANSISTREAMS C and C++ compiler pragma.
See the C/C++ Programmer’s Guide for more information.
-bdllsonly | -bdynamic | -bstatic
Tells eld what type of file to look for in each directory when eld searches for the
file names specified for the -l or -lib flags. The three possible values are:
-bdllsonly
Tells eld to search only for DLLs when it needs to search for the
file name specified in the -l or -lib flag.
If the file name is unqualified, in each directory searched, eld first
tries to open a file with the name specified for the -l or -lib flag. If
eld cannot find a file with the specified name and the searched
directory is not in the Guardian file system (/G), eld prefixes lib
and suffixes .so to the file name and attempts to open a file with
that modified name. As its final attempt to find the file, eld
attempts to open a file that has the specified name prefixed with z
and suffixed with dll.
An error occurs if the opened file does not contain a DLL.
-bdynamic
Directs eld to search for DLLs and archive files when it needs to
search for the file name specified in the -l or -lib flag.
If the file name is unqualified, in each directory searched, eld first
tries to open a file with the name specified for the -l or -lib flag. If
eld cannot find a file with the specified name and the searched
directory is not in the Guardian file system (/G), eld prefixes lib
and suffixes .so to the file name and attempts to open a file with
that modified name. If eld still cannot find the file and the
searched directory is not in the Guardian file system (/G), it
prefixes the specified name with the lib prefix but with .a as the
suffix and attempts to open a file with that modified name. As its
final attempt to find the file, eld attempts to open a file that has the
specified name prefixed with z and suffixed with dll.
An error occurs if:
527188-024
•
eld finds a DLL in a file whose name has the form
libfilename7.a
•
eld finds an archive in a file whose name has the form
libfilename7.so or zfilename7dll
•
eld finds a linkfile rather than a DLL or an archive
Hewlett Packard Enterprise
3−59
eld(1)
OSS Shell and Utilities Reference Manual
-bstatic
Directs eld to search only for archive files when it needs to search
for the file name specified in the -l or -lib flag.
If the file name is unqualified, in each directory searched, eld first
tries to open a file with the name specified for the -l or -lib flag).
If eld cannot find a file with the specified name and the search
path is not in the Guardian file system (/G), then eld prefixes lib
and suffixes .a to the file name and attempts to open a file with
that modified name.
An error occurs if the opened file does not contain an archive.
For more information on search paths, see the Finding Libraries subsection of
this reference page under DESCRIPTION.
When a specified file cannot be found, eld issues an error message unless the
-allow_missing_libs flag is specified.
The -bdllsonly, -bdynamic, and -bstatic flags are search control toggles. Multiple flags can be specified in a single eld invocation; the behavior specified
remains in effect until another flag in the set is specified. Thus, you can search for
both DLLs and archive files for some -l and -lib flags and search for just archive
files for others.
The default library search control is -bdynamic.
-bglobalized
Controls creation of the searchList for resolving the symbols in the loadfile. This
flag causes the system to use the following sequence:
•
•
For link-time resolutions:
1.
The loadfile itself
2.
The user library, if the loadfile is a program and has a user library
3.
Breadth-first transitive closure of DLLs on the libList
4.
Implicit libraries
For load-time resolutions:
1.
The main program
2.
The user library
3.
Breadth-first transitive closure of DLLs on the libList
4.
Implicit libraries
You cannot use this flag when you use the -blocalized, -bsemi_localized, or
-bsymbolic flag. The default action is the action for the -blocalized flag.
3−60
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
-blocalized
eld(1)
Controls creation of the searchList for resolving symbols in the loadfile. This flag
causes the system to use the following sequence for both link-time and load-time
resolutions:
1.
The loadfile itself
2.
The user library, if the loadfile is a program and has a user library
3.
Breadth-first transitive closure of re-exported libList-specified DLLs
4.
Implicit libraries
This is the default eld action.
You cannot use this flag when you use the -bglobalized, -bsemi_localized, or
-bsymbolic flag.
-bsymbolic | -bsemi_globalized
Controls creation of the searchList for resolving symbols in the loadfile. This flag
causes the system to use the following sequence:
•
•
For link-time resolutions:
1.
The loadfile itself
2.
The user library, if the loadfile is a program and has a user library
3.
Breadth-first transitive closure of DLLs on the libList
4.
Implicit libraries
For load-time resolutions:
1.
The loadfile itself
2.
The main program
3.
The user library
4.
Breadth-first transitive closure of DLLs on the libList
5.
Implicit libraries
This is the same search order as for -bglobalized. However, when the searchList
is created at load time, the loadfile is placed before the program at the beginning
of the searchList.
You cannot use this flag when you use the -bglobalized or -blocalized flag. The
default action is the action for the -blocalized flag.
-call_shared | { -dll | -shared } | -r
Tells eld what type of file to create as filename11. The possible values are:
-call_shared
The file is to be a program loadfile. This is the default eld action.
You cannot use this flag when you use the -dll or -shared flag or
the -r flag.
527188-024
Hewlett Packard Enterprise
3−61
eld(1)
OSS Shell and Utilities Reference Manual
-dll | -shared
The file is to be a DLL.
You cannot use this flag when you use the -call_shared or -r flag.
-r
The file is to be a linkfile.
You cannot use this flag when you use the -call_shared, -dll, or
-shared flag.
-change attribute_name attribute_value filename3
Changes the value of the run-time attribute specified in attribute_name to the
value specified in attribute_value in the existing file specified by filename3. See
the -set flag for a description of attribute_name and attribute_value.
For a linkfile, you can only change the value for FLOATTYPE and
DATA_MODEL. The value for LIBNAME can only be changed for program
files. If LIBNAME is specified with a null value (&quot;&quot;) for attribute_value, the
existing user library name is removed from the program file filename3.
The INCOMPLETE attribute only applies to an import library; the -change flag
can be used to turn it ON but cannot be used to turn it off.
You cannot specify other loadfile filenames or flags other than the following with
the -change flag:
-noverbose, -verbose, or -warn
-fl or -obey
-stdin
The resulting loadfile has the same eld timestamp as before.
-check_registry filename4
Tells eld to check the -range entry in the private DLL registry identified as
filename4 for an address range for the file specified as filename11 and verify that
the DLL being created can fit into the range found.
If neither the -check_registry flag nor the -update_registry flag is specified, eld
does not use a private DLL registry.
You must also use the -dll flag when you use this flag. You cannot use the following flags when you use the -check_registry flag:
-d or -t
-grow_data_amount, -grow_limit, -grow_percent, or -grow_text_amount
-update_registry
-cross_dll_cleanup
Discards a procedure in an input linkfile if a procedure of the same name exists in
one of the other DLLs you specified. The reference to the symbol is resolved to
the copy of the symbol that is in the DLL.
Without the use of the -cross_dll_cleanup flag, input linkfiles can contain multiple copies of the same global procedure, all marked STO_MULTIPLE_DEF_OK,
and eld discards the code for all except one copy of the procedure.
When the -cross_dll_cleanup flag is used and a procedure of the same name is
found in a DLL, eld discards the code for even the last copy of the procedure, and
instead resolves references to the procedure to the copy found in the DLL. Using
this flag allows you to reduce the size of the loadfile (program or DLL) you create.
When this flag is used, all the input linkfiles must have been compiled using the Wglobalized flag.
3−62
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
eld(1)
For best results, list the DLLs that are indirectly used by this loadfile in addition to
the DLLs that are directly used by this loadfile.
This flag is available on systems running H06.21 or a later H-series RVU, J06.10
or a later J-series RVU, or systems that have installed SPR T0608H01_AAL.
-d address1
Specifies the hexadecimal virtual address at which the data constant segment
starts. When creating a program file, the default value for address1 is 08000000.
When creating an explicit DLL, the default value is set to the next multiple of 64
kilobytes after the end of the text segment. When creating an implicit DLL, the
default value is set to the next multiple of 128 kilobytes after the end of the text
segment.
The value specified for address1 is always hexadecimal and can optionally be
prefixed by 0H. The specified value is automatically rounded up to a multiple of
128K bytes if eld is building an implicit DLL, or to a multiple of 64K bytes if eld
is building any other type of file. If no more than 8 hexadecimal digits are
specified, the number specified is sign-extended to 16 digits.
If you use this flag, you must also use the -t flag.
If you are building a DLL and do not use the -d flag, eld begins the data segment
at the next 64K boundary after the end of the text segment. The -d flag can be
used to place the data segment at some other address, rather than directly after its
text segment. You should do this only if there is a special need to do so; Hewlett
Packard Enterprise recommends using the default placement whenever possible.
You cannot use this flag if you use the -check_registry or -update_registry flags.
-data_resident Specifies that the loadfile being created can contain both resident code and variable data.
When you create a loadfile with both resident code and variable data, you must
either specify the -data_resident flag or the -instance_data flag with one of the
values data2, data2hidden, or data2protected. Otherwise, an error occurs and
no loadfile is created.
When you use the -data_resident flag, eld also sets the
EF_TANDEM_DATA_RESIDENT bit in the e_flags field of the file header.
This is a special flag that can be used when building a proto-process.
{-dllname | -soname } DLL_name
Tells eld the DLL name to store in the DLL being created. When this DLL is
specified in the link step of another loadfile, the DLL name stored in this DLL is
placed in the libList of the loadfile for later use by rld or the eld -alf flag when
searching for DLLs.
If the DLL being created will reside in the Guardian file system, DLL_name must
conform to Guardian filename rules. If the DLL being created will reside in the
OSS file system, DLL_name must conform to OSS pathname rules. If you want
the DLL to be able to reside in either file system, use an unqualified Guardian file
identifier as both its DLL_name and its OSS filename.
If you specify both a DLL_name and the -o flag, the output loadfile file name is
determined by the -o specification and DLL_name is saved in the DLL being
created. Hewlett Packard Enterprise recommends that you do not do this unless
there is a specific need to do so; making DLL_name differ from the DLL’s file
name can cause problems, especially when the DLL needs to reside in both the
OSS and Guardian file systems.
If you specify DLL_name but do not use the -o flag, the output loadfile file name
527188-024
Hewlett Packard Enterprise
3−63
eld(1)
OSS Shell and Utilities Reference Manual
uses the DLL_name value.
If you do not specify DLL_name but use the -o flag, the output loadfile unqualified
filename is used as the DLL name stored in the DLL being created; that is, only
the unqualified part (everything up to, but not including the last slash in the name)
of the output file pathname is used.
If you omit both a DLL_name and the -o flag, the output loadfile filename and
DLL_name in the libList both default to a.out. Hewlett Packard Enterprise recommends against using this default value because it is too generic to allow for proper
administration of files.
-e symbol_name1
Specifies a function identifier. The specified function is the entry point, that is, the
point at which to begin executing the program when the program is loaded.
You should use this flag only when linking a program that will execute without
standard run-time support facilities and without linking a module such as
CCPLMAIN (in the Guardian file system) or ccplmain.o (in the OSS file system)
that contains a function with the MAIN attribute. Do not use this flag for libraries.
{ -export | -exported_symbol } symbol_name2
Tells eld to mark symbol_name2 for export in the output loadfile in addition to
those normally marked. This flag can be used with the -export_not or
-hidden_symbol flag to create sets of symbols to be exported.
The same symbol cannot be specified as symbol_name2 in an -export flag and as
symbol_name3 in an -export_not flag.
The default action when the -ul flag is not used is to export only those symbols
marked by a compiler as requiring export.
-export_all
Tells eld to mark as exported all symbols in the dynamic symbol table of the output loadfile except for the following:
•
Linker-defined symbols other than _MCB (for the master control block)
•
Procedures whose names begin with __sti__ (global constructors),
__std__ (global destructors), __INIT__ (initialization functions), or
__TERM__ (termination functions)
This flag can be used with the -export_not or -hidden_symbol flag to create a
subset of symbols to be exported.
The default action when you do not specify the export_all flag or the -ul flag is to
export only those symbols marked by a compiler as requiring export.
{ -export_not | -hidden_symbol } symbol_name3
Tells eld not to mark symbol_name3 for export in the output loadfile. This flag
can be used with the -export_all flag to create sets of symbols to be exported.
The same symbol cannot be specified as symbol_name3 in an -export_not flag
and as symbol_name2 in an -export flag.
The default action when the -ul flag is not used is to export only those symbols
marked by a compiler as requiring export.
3−64
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
eld(1)
-first_l pathname1
Tells eld to use the specified pathname when searching for libraries. pathname1 is
used in library searches before the public libraries are searched.
pathname1 is either the relative or absolute pathname of an OSS directory.
eld does not verify the names of locations specified in the -first_l flag.
This flag can be specified more than once in a command line or an obey file. If
you specify it more than once, the specified pathnames are searched in the order
specified.
See the Finding Libraries subsection under DESCRIPTION for details about
the effect of this flag on search order.
{-fl | -obey } location1
Specifies the name of an eld command file containing eld command tokens (such
as filenames and command flag specifications).
The command file must be a C text file or an EDIT file. Tokens in the file can be
separated by spaces, tabs, or ends of lines. Tokens can contain double quotation
marks (&quot;) to group items into a single string, consistent with OSS shell usage.
Within the command file, two hyphens indicate a comment that extends to the end
of the current line.
Command files can be nested. There is no limit to the depth of nesting. Direct or
indirect recursive nesting is allowed; eld keeps a stack of command file names
encountered while processing the -fl or -obey flag and ignores any nested -fl or
-obey flag that specifies a file name currently on the stack.
You can specify this flag as often as you want in the command line or an obey file.
Each specification is processed when encountered.
-grow_data_amount number1
Specifies the absolute amount in bytes of slack space to be reserved in virtual
memory to allow for the growth of the data segment. The number specified is
assumed to be decimal unless prefixed by 0x; the 0x prefix allows you to specify
the number of bytes in hexadecimal.
This flag is used with the -update_registry flag. When eld makes the entry in the
private DLL registry, the -grow_data_amount flag tells it to record a larger size
for the data segment than is actually present in the DLL being built. The amount
specified for -grow_data_amount tells how much larger to make the data segment. When this registry is used to choose addresses for other DLLs, the linker
will not put them directly after this one in virtual memory, but rather leave space
for future versions of this DLL to be larger.
The value specified for this flag might be overridden by the value used for the
-grow_percent flag. The default value is 0 bytes.
When you use this flag, you must also use the -update_registry flag. You cannot
use this flag with the -grow_limit flag.
-grow_text_amount number2
Specifies the absolute amount in bytes of slack space to be reserved in virtual
memory to allow for the growth of the text segment. The number specified is
assumed to be decimal unless prefixed by 0x; the 0x prefix allows you to specify
the number of bytes in hexadecimal.
This flag is used with the -update_registry flag. When eld makes the entry in the
private DLL registry, the -grow_text_amount flag tells it to record a larger size
527188-024
Hewlett Packard Enterprise
3−65
eld(1)
OSS Shell and Utilities Reference Manual
for the text segment than is actually present in the DLL being built. The amount
specified for -grow_text_amount tells how much larger to make the text segment.
When this registry is used to choose addresses for other DLLs, the linker will not
put them directly after this one in virtual memory, but rather leave space for future
versions of this DLL to be larger.
The value specified for this flag might be overridden by the value used for the
-grow_percent flag. The default value is 0 bytes.
When you use this flag, you must also use the -update_registry flag. You cannot
use this flag with the -grow_limit flag.
-grow_limit number3
Specifies the absolute amount in bytes of slack space to be reserved in virtual
memory to allow for the growth of the data and text segments. The number
specified is assumed to be decimal unless prefixed by 0x; the 0x prefix allows you
to specify the number of bytes in hexadecimal.
This flag is used with the -update_registry flag. When eld makes the entry in the
private DLL registry, the -grow_limit flag tells the total size to record for the DLL
being built. When this registry is used to choose addresses for other DLLs, the
linker will not put them directly after this one in virtual memory, but rather leave
space for future versions of this DLL to be larger.
The default value is 0 bytes.
When you use this flag, you must also use the -update_registry flag. When you
use this flag, you cannot use the -grow_data_amount, -grow_text_amount, or
-grow_percent flag.
-grow_percent number4
Specifies the relative amount of slack space to be reserved in virtual memory to
allow for the growth of the data and text segments.
This flag is used with the -update_registry flag. When eld makes the entry in the
private DLL registry, the -grow_percent flag tells a percentage to add to the sizes
of each of the text and data segments, when calculating the total size to record for
the DLL being built.
eld calculates an amount to use for a data segment, based on the
-grow_data_amount flag, then calculates an amount to use based on the
-grow_percent flag. The larger of the two amounts is used as the size for a data
segment. The amount used is rounded up to a multiple of 64KB (or 128KB for an
implicit DLL).
eld calculates an amount to use for a text segment, based on the
-grow_text_amount flag, then calculates an amount to use based on the
-grow_percent flag. The larger of the two amounts is used as the size for a text
segment. The amount used is rounded up to a multiple of 64KB (or 128KB for an
implicit DLL).
When this registry is used to choose addresses for other DLLs, the linker will not
put them directly after this one in virtual memory, but rather leave space for future
versions of this DLL to be larger.
The default value is 10 percent.
When you use this flag, you must also use the -update_registry flag. You cannot
use this flag with the -grow_limit flag.
3−66
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
eld(1)
-import_lib filename5
Tells eld to create an import library named filename5 in addition to creating a new
DLL.
The new import library can be incomplete. The import library contains symbols
for use by debugging utilities only if the new DLL also contains them.
You cannot use this flag when you use the -import_lib_stripped or
-make_implicit_lib flag.
-import_lib_stripped filename6
Tells eld to create an import library named filename6 in addition to creating a new
DLL.
The new import library can be incomplete. The import library will not contain
symbols for use by debugging utilities, regardless of whether the new DLL contains them.
You cannot use this flag when you use the -import_lib or -make_implicit_lib
flag.
-instance_data keyword
Tells the linker whether to create one or two data segments, and whether to require
that the loadfile contain no data that must go into the data variable segment if two
segments are created.
The value of keyword can be:
data1
Create only one data segment for constant and variable data. The
segment can be both read and written without restriction.
data1constant Flag as an error any situation where the loadfile contains the kind
of data that would go into the data variable segment if eld was
told to create two data segments.
This is the only permitted value when the -make_implicit_lib
flag is used.
data2
Create both a data constant segment and a data variable segment.
The data constant segment is read-only after being updated by the
runtime loader; the data variable segment can be both read and
written without restriction.
data2hidden
Create both a data constant segment and a data variable segment.
The data constant segment is read-only after being updated by the
runtime loader; only privileged code can read or write the data
variable segment.
data2protected
Create both a data constant segment and a data variable segment.
The data constant segment is read-only after being updated by the
runtime loader; only privileged code can write the data variable
segment but read access is unrestricted.
The data2protected value is not supported on systems running
H06.21 or later H-series RVUs or J06.10 or later J-series RVUs.
The default value for keyword is data1.
If you are creating a loadfile with both resident code and variable data, then you
must either specify the -data_resident flag or the -instance_data flag with one of
527188-024
Hewlett Packard Enterprise
3−67
eld(1)
OSS Shell and Utilities Reference Manual
the values data2, data2hidden, or data2protected.
You cannot specify this flag if you use the -r flag.
{ -l | -lib } filename7
Specifies a character string that eld uses to search for an archive or DLL to be
used in the link. Whether the search looks for archives, DLLs, or both depends on
the -bstatic, -bdllsonly, and -bdynamic options, respectively.
There are three- and four-character strings (for example, &quot;cre&quot;) that eld uses in a
special way for searching for public DLLs.
The -l flag must be specified in lowercase type. -l is a synonym for -lib.
If you specify the -verbose flag, eld writes to its output listing the locations where
it found a DLL or archive file.
Other flags affect how filename7 is used. See the Finding Libraries subsection
under DESCRIPTION for details.
{ -L | -libvol } pathname2
Tells eld to use the specified pathname when searching for libraries. pathname2 is
used in library searches after the public libraries are searched.
pathname2 is either the relative or absolute pathname of an OSS directory.
eld does not verify the names of locations specified in the -libvol or -L flag.
This flag can be specified more than once in a command line or an obey file. If
you specify it more than once, the specified pathnames are searched in the order
specified.
See the Finding Libraries subsection under DESCRIPTION for details about
the effect of this flag on search order.
-libname Guardian_filename
Stores the specified name within the program being built, to tell the operating system that this is the name of the user library to load into memory along with this
program. Guardian_filename must be a Guardian file identifier qualified with a
disk name and subvolume name; that is, of the form $disk.subvol.fileID. Use an
escape character before the special character $ in the name so that the OSS shell
does not process it, or enclose the entire flag specification in quotation marks.
The -set and -change flags can also associate a native user library with an executable native program.
The value specified for Guardian_filename cannot be the Guardian name of an
OSS file.
-limit_runtime_paths
Tells eld to mark the loadfile so that rld will omit certain locations when searching for DLLs to resolve symbols. See Finding Libraries in the DESCRIPTION
section of this reference page for more information.
The default action is to search all locations described in Finding Libraries.
-local_libname filename8
Specifies the name of a user library that can be used to resolve references at link
time in the program being created.
If this flag is omitted, eld uses the value specified for -set libname as the user
library. If this flag is specified and the -set libname flag is omitted, then the value
of filename8 is also stored within the program as the user library name and
3−68
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
eld(1)
therefore must name a file in the Guardian filesystem (/G); eld converts this name
to meet the -set libname syntax requirements for a Guardian filename.
If the user library cannot be found or cannot be opened, a warning message is
issued and the program file is not preset at link time.
-m | -map
Tells eld to produce a memory map of the program or DLL being created.
The default behavior does not produce a memory map.
-make_implicit_lib
Specifies that eld should mark the DLL being created as an implicit library. The
default action does not mark the DLL as an impicit library.
You cannot use this flag when you use the -import_lib flag.
-make_import_lib filename9
Tells eld to make filename9 a DLL import library using the DLL files specified
elsewhere in the same command line or obey file.
You use this flag to make an import library that represents a:
•
Single explicit DLL
•
Set of implicit DLLs
If one or more DLLs are specified in the command line or obey file and they are
all implicit DLLs, eld creates an import library to represent them. If there is only
one DLL in the command line or obey file and it is not an implicit DLL, eld makes
the import library to represent it. If there are multiple DLLs in the command line
or obey file and they are not all implicit DLLs, an error occurs.
You can use a private DLL registry even if you are creating an import library to
represent a set of implicit DLLs, (all of the specified DLLs have the implicit bit
set in their headers). The value specified for filename9 is used as the entry name
for the implicit libraries in the private DLL registry.
To use this flag, at least one DLL file must be specified somewhere in the command line or obey file.
-must_preset Tells eld to treat the situation as an error when presetting fails. If this flag is omitted, the linker continues.
-must_use_iname
Tells eld to treat the situation as an error when it cannot delete an existing file to
create an import library file of the same name.
The default behavior is to issue a warning message.
-must_use_oname
Tells eld to treat the situation as an error when it cannot delete an existing file to
create the new object file created from a set of linkfiles, or the output file of the
-alf or -strip flags, with the same name.
The default behavior is to issue a warning message.
-must_use_rname
Tells eld to treat the situation as an error when it cannot delete an existing file to
create a private DLL registry file of the same name.
The default behavior is to issue a warning message.
527188-024
Hewlett Packard Enterprise
3−69
eld(1)
OSS Shell and Utilities Reference Manual
-no_optional_lib | -optional_lib
Specifies whether a DLL specified in the command line or obey file should be considered optional when creating a loadfile.
When -no_optional_lib behavior is in effect, any specified library is included in
the .liblist section of the loadfile being created. When -optional_lib behavior is in
effect, a specified library can be omitted from the .liblist section of the loadfile
being created if omitting it would not affect how symbolic references are resolved.
For example, a DLL can be omitted when all of the following are true:
•
The DDL does not export symbols that resolve any references in the
loadfile being created
•
The DLL does not cause other DLLs to be added to the search list, where
the other DLLs resolve references in the loadfile being created
•
The DLL does not cause other DLLs to be placed in a different order
within the search list when those DLLs resolve references in the loadfile
being created
These flags can be specified as many times as needed in the command line or obey
file. Providing either flag overrides the current setting, so that the linker actions
can be controlled on a library-by-library basis.
If a library is specified more than once, eld uses the specification in effect for the
first instance of the DLL that it processes and ignores the other specifications.
The default behavior is -no_optional_lib.
-no_reexport | -reexport
Tells eld whether to mark any DLL specified in a -l or -lib flag after this flag for
reexport in its libList entry in the loadfile being created. Specifying
-no_reexport leaves the library unmarked; specifying -reexport marks the
library. Reexport affects how eld does its transitive closure on searches and is
used by rld to decide how to fix-up symbolic references.
-no_reexport is the default action.
These flags can be specified as many times as needed in the command line or obey
file. Providing either flag overrides the current setting, so that the linker actions
can be controlled on a library-by-library basis.
-nostdfiles | -no_stdfiles
Specifies that C run-time library functions do not automatically open the standard
input and standard output files.
-nostdlib | -no_stdlib
Prevents eld from searching the standard library locations for DLLs and archive
files.
-noverbose | -no_verbose
Prevents eld from writing warning and informational messages to its output listing. Only error messages and output specifically requested by other options
appears in the listing.
The default value is -no_verbose.
If you specify more than one of the flags -warn, -verbose, and -noverbose or
-no_verbose in the command line or an obey file, eld displays an inconsistent
usage error message.
3−70
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
eld(1)
-NS_extent_size extent-size
Changes the primary and secondary extent sizes from the default (16 pages for primary and 512 pages for secondary) to the number of pages specified by extentsize. 16 pages equals 32 KB; 512 pages equals 1 MB.
This is for the Guardian environment only.
-NS_max_extents max_extents
Changes the maximum number of extents from the default (978) to the number
specified by max_extents.
This is for the Guardian environment only.
-o filename10
Specifies the filename of the output loadfile. filename10 can be the same as an
input file name.
When filename10 is the same as an existing file and linking is successful, eld
deletes the existing file and then writes the output file. An error occurs if you do
not have permission to delete the existing file and the -must_use_oname flag is
also specified. (See the description of the -temp_o flag in this reference page for a
description of the behavior when the -must_use_oname flag is not specified.)
If you do not specify a -o flag, the default output loadfile filename depends on
whether a -dllname or -soname flag is specified. filename10 can also become the
DLL name used for the file in the libList. See the description of the -dllname flag
in this reference page for more information.
-public_registry filename11
Tells eld to use the file identified as filename11 as the public DLL registry file.
If this flag is omitted, ld searches as follows to find the name of the public DLL
registry file to use:
1.
Its own directories, where it looks for a file named zreg (normally
/usr/bin/zreg or /usr/lib/zreg)
2.
Current data obtained from the operating system using definitions in
/usr/include/dpublib.h
-rename old_name new_name
Changes the symbol name of an externally visible procedure or data item. If
old_name is the name of an externally visible procedure or data item that is
defined in this link, its name is changed to new_name. The object file created by
this link defines new_name instead of old_name. If the code or data has a reference to old_name, that reference still refers to the name old_name. It will not be
resolved within the object file created by this link. See the eld and xld Manual
for details.
{ -rld_l | -rpath } path_list1
Tells eld to set search paths in the loadfile for later use with the -alf flag or by the
rld loader. path_list1 identifies paths to be searched after using the loadfile location and before using the rld default locations.
path_list1 contains one or more pathname entries, separated by a colon (:). A
pathname can be either an absolute OSS directory pathname or a fully qualified
Guardian subvolume name.
This flag can be specified more than once in a command line or an obey file. Multiple path_list1 specifications are concatenated into a single loadfile entry.
527188-024
Hewlett Packard Enterprise
3−71
eld(1)
OSS Shell and Utilities Reference Manual
See the Finding Libraries subsection under DESCRIPTION for details about
the effect of this flag on search order.
-rld_first_l path_list2
Tells eld to set search paths in the loadfile for later use with the -alf flag or by the
rld loader. path_list2 identifies paths to be searched after using the location
specified by -first_l and before using the public libraries.
path_list2 contains one or more pathname entries, separated by a colon (:). A
pathname can be either an absolute OSS directory pathname or a fully qualified
Guardian subvolume name.
This flag can be specified more than once in a command line or an obey file. Multiple path_list2 specifications are concatenated into a single loadfile entry.
See the Finding Libraries subsection under DESCRIPTION for details about
the effect of this flag on search order.
-s | -x
Omits symbol information used for symbolic debugging from the output linkfile or
loadfile being created. A file stripped of all symbol information cannot be symbolically debugged with the Visual Inspect or Native Inspect debugger.
You can use this flag only when creating a file. To strip all symbol information
from an existing loadfile, use the -strip flag.
-set attribute_name attribute_value
Sets the value of the run-time attribute specified in attribute_name to the value
specified in attribute_value when creating a loadfile. Use the -change flag to
change a run-time attribute in an existing loadfile.
Each attribute_name has a corresponding range of accepted attribute_values as
follows:
•
CPPDIALECT or CPLUSPLUSDIALECT is:
CPPNEUTRAL or NEUTRAL
If CPPDIALECT or CPLUSPLUSDIALECT is not specified, the value
used comes from the input linkfiles.
•
DATA_MODEL is one of the following:
ilp32
lp64
neutral
If DATA_MODEL is not specified, the value used comes from the input
linkfiles. This attribute is supported for systems running H06.24 or later
H-series RVUs or J06.13 or later J-series RVUs only.
•
FLOAT_LIB_OVERRULE is either ON or OFF. The default value is
OFF. (A FLOAT_TYPE_OVERRULE value of ON is ignored for
DLLs; this attribute only has meaning for programs.)
•
FLOATTYPE is one of the following:
IEEE_FLOAT
NEUTRAL_FLOAT
TANDEM_FLOAT
If FLOATTYPE is not specified, the value used comes from the input
linkfiles.
3−72
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
eld(1)
•
HEAP_MAX, MAINSTACK_MAX, [PROCESS_]SUBTYPE, and
SPACE_GUARANTEE are unsigned numbers. The default value is 0
(zero). For HEAP_MAX, MAINSTACK_MAX, and
SPACE_GUARANTEE, the number of bytes specified is assumed to be
decimal unless prefixed by 0x; the 0x prefix allows you to specify the size
in hexadecimal.
•
HIGHPIN, HIGHREQUESTER[S] or HIGHREQUESTOR[S], and
INSPECT are either ON or OFF. The default value is ON.
•
INCOMPLETE is either ON or omitted. This attribute can only be set
when creating an import library. If it is not set, then the import library is
complete. (The default value is omitted, so that a created import library is
complete.)
•
INTERPOSE_USER_LIBRARY is either ON or OFF. This attribute
can be set only for a DLL; at run time, this attribute is disregarded unless
the DLL is loaded as a user library. The default value is OFF.
•
LIBNAME is the Guardian filename of a user library file, specified as
described for the -libname flag. The default value is none.
•
RUNNAMED and SAVEABEND are either ON or OFF. The default
value is OFF.
•
RLD_UNRESOLVED is ERROR, IGNORE, or WARN. The default
value is ERROR.
•
USER_BUFFERS is either ON or OFF. The default value is OFF.
•
SYSTYPE is either oss or guardian. The default value is determined by
the file system that contains the output file. For users of this reference
page, the default value is probably oss. (If the output loadfile is created in
the Guardian file system through the /G directory, the default is guardian.)
See the eld and xld Manual for a description of each run-time attribute.
-show_multiple_defs
Tells eld to produce a listing of any symbols with multiple definitions within the
input linkfiles.
The default action does not display instances of multiple definitions.
-stdin
Reads the contents of the standard input file at the place in the command line
where the flag is specified.
-strip filename12
Removes information used for symbolic debugging from an existing loadfile with
the name filename12. A file stripped of all symbol information cannot be symbolically debugged with the Visual Inspect or Native Inspect debugger.
You can use this flag only on an existing loadfile. To strip all symbol information
when creating a loadfile, use the -s or -x flag.
You cannot specify other loadfile filenames or flags other than the following with
the -strip flag:
-noverbose, -verbose, or -warn
-fl or -obey
527188-024
Hewlett Packard Enterprise
3−73
eld(1)
OSS Shell and Utilities Reference Manual
-must_use_oname
-stdin
-temp_o
The resulting file has the same eld timestamp as before.
-t address2
Specifies the hexadecimal virtual address at which the text area starts. The default
values for address2 are:
•
70000000 for user programs
•
78000000 for a DLL when no DLL registry is used
The value specified for address2 is always hexadecimal and can optionally be
prefixed by 0H. The specified value is automatically rounded up to a multiple of
128 kilobytes for a implicit DLL library or 64 kilobytes for other types of
loadfiles. If no more than 8 hexadecimal digits are specified, the number specified
is sign-extended to 16 digits.
You cannot use this flag if you use the -check_registry or -update_registry flags.
You should not use this flag if you want the DLL address to be determined from a
DLL registry file under your control.
-temp_i filename13
Tells eld to save its import library work with the specified file name until it has
successfully rewritten the final file.
If an unqualified filename is used, eld saves the file in the directory where
filename10 is located.
If the -temp_i flag is not used and eld finishes creation of a new temporary file but
cannot remove an existing file with the same name as the specified import library
file, eld leaves the temporary file in the same directory as the output file and gives
it a unique filename beginning with the letters ZLD.
This flag can be used only when the -import_lib, -import_lib_stripped, or
-make_import_lib flag is used.
-temp_o filename14
Tells eld to save its output for the new object file created from a set of linkfiles, or
the output file of the -alf or -strip flags, with the specified file name until it has
successfully rewritten the final file.
If an unqualified filename is used and a new object file is being created or the
-strip flag is used, eld saves the file in the directory where filename10 is located.
If an unqualified filename and an output file is being created when the -alf flag is
used, eld saves the file in the directory where filename1 is located.
If the -temp_o flag is not used and eld finishes creation of a new temporary file
but cannot remove an existing file with the same name as the specified output file,
eld leaves the temporary file in the same directory as the output file and gives it a
unique filename beginning with the letters ZLD.
-temp_r filename15
Tells eld to save its private registry update work with the specified file name until
it has successfully rewritten the final file.
If an unqualified filename is used, eld saves the file in the directory where
filename10 is located.
If the -temp_r flag is not used and eld finishes creation of a new temporary file
3−74
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
eld(1)
but cannot remove an existing file with the same name as the specified registry
file, eld leaves the temporary file in the same directory as the output file and gives
it a unique filename beginning with the letters ZLD.
-u symbol_name4
Tells eld to add symbol_name4 as an undefined symbol. This causes eld to search
for this symbol in any archive libraries that are specified on the command line or
in an obey file.
-ul
Creates a user library. Specify this flag when linking modules to create a DLL as
a native user library.
When you specify the -ul flag, the exported symbols are those described as
exported by the -export_all flag, unless you also use the -export_not or
-hidden_symbol flag.
-unres_symbols { error | ignore | warn }
Tells eld what action to take when a needed symbol cannot be resolved:
error
Issue an error message.
This is the default action. The -error_unresolved flag is recognized as a synonym for this specification.
ignore
Ignore the missing symbol reference.
warn
Issue a warning message.
The -warn_unresolved flag is recognized as a synonym for this
specification.
Other flag specifications override these flags. If you specify more than one of
these flags in the command line or an obey file, eld displays an inconsistent usage
error message.
-update_code Tells eld to update relocation sites in the code segment when the -alf flag is also
used.
-update_registry filename16
Tells eld to update the -range entry in the private DLL registry identified as
filename16 with the address range for the file specified as filename10.
If no -range entry is found, a range entry is appended to the registry file content.
If neither the -check_registry nor -update_registry flag is specified, eld does not
use a private DLL registry.
You must also use the -dll flag when you use this flag.
-verbose
Directs eld to write error, warning, and informational messages to its output listing, along with output specified by other options.
The default value is -no_verbose.
If you specify more than one of the flags -warn, -verbose, and -noverbose or
-no_verbose in the command line or an obey file, eld displays an inconsistent
usage error message.
527188-024
Hewlett Packard Enterprise
3−75
eld(1)
OSS Shell and Utilities Reference Manual
-warn
Directs eld to write only error and warning messages to its output listing, along
with output specified by other options.
The default value is -no_verbose.
If you specify more than one of the flags -warn, -verbose, and -noverbose or
-no_verbose in the command line or an obey file, eld displays an inconsistent
usage error message.
-warn_common
Directs eld to issue a warning message when a common symbol is combined with
another common symbol that has the same name but a different size.
This flag is supported for systems running H06.21 or later H-series RVUs or
J06.10 or later J-series RVUs only.
-y symbol_name5
Tells eld to report which linkfiles define and use the symbol symbol_name5. The
linkfiles are listed in the order encountered.
This information can be useful if a previous eld command produced error or warning messages about a symbol being either undefined or defined more than once.
Operands
filename17
Specifies one or more files for the eld utility to process.
The files used can be:
•
Linkfiles that eld will combine into a new linkfile or loadfile
•
DLLs that eld will use to resolve references in a new loadfile that it is
creating, or in a loadfile being processed by the -alf flag
•
DLLs that are input to the -make_import_lib flag
This operand is required for all flags except the alf, -change, and -strip flags.
DESCRIPTION
The eld utility links one or more TNS/E native position-independent code (PIC) linkfiles to produce an executable or nonexecutable native PIC loadfile. You can also modify existing loadfiles
using eld. You can invoke eld directly or, if you are creating a C or C++ program, you can use the
c89 or the c99 utility to invoke eld automatically for you.
Flag Names
Names of flags obey the following rules:
•
If a flag name is one letter and the flag takes a value, the space between the flag name and
the value is optional
•
Flag names and keyword values are not case sensitive, except for the separate -l and -L
flags
If no flags or operands are used, the eld command displays usage help in its output listing.
Input Files
eld cannot process a linkfile that contains a code section larger than 16 megabytes. This size restriction is imposed by the Itanium standard.
3−76
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
eld(1)
Output Files
eld creates loadfiles on the host platform with an OSS file mode of 777 (rwxrwxrwx), which is
then ANDed with the umask value of the user creating the file. eld creates all other object files
with an OSS file mode of 666 (r-xr-xr-x), which is then ANDed with the umask value of the user
creating the file.
Any text file created by ld in the Guardian file system has a file code of 180. You can use the
CTOEDIT utility to convert such files to code 101 files for viewing with TEDIT.
Loadfiles or linkfiles created in the Guardian file system have a Guardian file code of 800.
Maintaining DLL Registry Files
A DLL registry file is a C text file that contains attribute information associated with a set of
DLLs. The file contains:
•
An optional -dllarea specification that defines the first and last addresses of the virtual
memory area that is to be assigned to all DLLs. This specification has the form:
-dllarea dllarea_start_address dllarea_end_address
where both values are expressed in hexadecimal. If either value contains no more than 8
digits, it is automatically sign-extended to 16 digits. If dllarea_start_address is less than
dllarea_end_address, new addresses are assigned in ascending order; otherwise, new
addresses are assigned in descending order. The larger of the two address values is noninclusive while the smaller address is inclusive.
The default values are:
dllarea_start_address
0x080000000
dllarea_end_address
0x070000000
•
A -range specification for each DLL in the set of DLLs. This specification has the form:
-range dll_file_name dll_start_address dll_max_size
where:
dll_file_name
is a loadfile filename (the -o flag filename10 value or its equivalent)
dll_start_address
is the first location of the text space (which can be set using the -t flag)
dll_max_size
includes the text space, the data space, and space for growth
The address range for a DLL begins at dll_start_address and extends through
dll_start_address+dll_max_size. Range specifications that do not overlap allow for faster
loading of DLLs. Overlapping range specifications must be created using a text editor.
Fields can be separated by spaces or tabs. Two successive hyphens indicate a comment that
extends to the end of the current line.
The eld linker appends new -range specifcations and can maintain existing -range specifications.
The -dllarea specification must be created using a text editor.
527188-024
Hewlett Packard Enterprise
3−77
eld(1)
OSS Shell and Utilities Reference Manual
Saving Temporary Files
eld creates temporary working files while it processes command line or obey file information.
These temporary working files are given names of the form ZLDAFnnn (for all files except import
libraries and private DLL registry files), ZLDAInnn (for import libraries), or ZLDARnnn (for
private DLL registry files), where:
nnn
is a unique sequentially assigned decimal number, beginning with 000
To create a final permanent file with the same name as an existing file, eld must first remove the
existing file. If eld processing is interrupted when removing and recreating the final file, the working file is preserved as a file named ZLDnnn.
The temp_i, -temp_o, or -temp_r flag allows you to save the completed working file as a temporary regular file with a known filename before the original file is removed. The temporary file is
itself removed after the final permanent file is completely written.
Finding Libraries
If you specify an absolute or relative pathname for a flag’s filenamen value, no search occurs. eld
opens the specified file to see if it is a linkfile, an archive, or a DLL. If the file cannot be opened,
an error occurs.
If you specify an unqualified filename (a filename value that does not contain a / character) for the
-l or -lib flag, the OSS version of eld attempts to find the file. eld searches for libraries in the following locations when resolving the values specified for the -l or -lib flags:
1.
Locations specified by the current -first_l flag
2.
Public libraries (installed by the system operator) * **
3.
Locations specified by the current -libvol and -L flags
4.
Default locations in the OSS environment when building a 32-bit or neutral object:
/lib:/usr/lib:/usr/local/lib:/G/SYSTEM/ZDLL * **
Default locations in the OSS environment when building a 64-bit object:
/lib64:/usr/lib64:/usr/local/lib64:/lib:/usr/lib:/usr/local/lib:/G/SYSTEM/ZDLL * **
The value of the COMP_ROOT environment variable is added to the beginning of /lib,
/usr/lib, /usr/local/lib, /lib64, /usr/lib64, and /usr/local/lib64. By default, the value of
COMP_ROOT is null in the OSS environment.
The steps marked by an asterisk (*) are skipped when the -nostdlib or -no_stdlib flag is in effect,
and the steps marked by two asterisks (**) are skipped only when the -bstatic flag is used.
Archive libraries encountered in steps marked by ** are reported as errors.
eld searches in each location for libraries by name. eld tries to open the specified file. If it cannot,
it modifies the supplied value and tries to open a file with the modified name. (Unqualified names
specified in the Guardian file system, /G, are not modified; eld uses only the supplied value.) The
prefix lib and the following suffixes are added to the specified name to create the modified name:
.so
To find a DLL, unless the -bstatic flag is in effect
.a
To find an archive file, unless the -dllsonly flag is in effect
To find a DLL, the prefix z and the suffix dll are also tried unless the -bstatic flag is in effect.
3−78
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
eld(1)
When the -alf flag is used, the OSS version of eld searches for DLLs in the following locations:
1.
Locations specified by the current -first_l flag
2.
Locations specified by the current -rld_first_l flag
3.
Public libraries (installed by the system operator) *
4.
The directory containing the loadfile (which might be a program or a DLL) **
5.
The files specified by L
6.
Locations specified by the current -rld_l or -rpath flag
7.
Default locations when the current loadfile is a 32-bit or neutral loadfile:
/lib:/usr/lib:/usr/local/lib:/G/SYSTEM/ZDLL * **
Default locations when the current loadfile is a 64-bit loadfile:
/lib64:/usr/lib64:/usr/local/lib64:/lib:/usr/lib:/usr/local/lib:/G/SYSTEM/ZDLL * **
The value of the COMP_ROOT environment variable is added to the beginning of /lib,
/usr/lib, /usr/local/lib, /lib64, /usr/lib64, and /usr/local/lib64. By default, the value of
COMP_ROOT is null in the OSS environment.
The steps marked by an asterisk (*) are skipped when the -nostdlib or -no_stdlib flag is in effect.
When the -limit_runtime_paths flag has been used for the loadfile, the following are omitted
from rld’s search:
•
The steps marked by two asterisks (**) in the previously described search order
•
Paths indicated by the TACL DEFINEs _RLD_FIRST_LIB_PATH and
_RLD_LIB_PATH.
For More Information
eld is not an interactive tool like Binder. For more information on using eld, see the eld and xld
Manual. For more information on run-time library use, see the rld Manual.
EXAMPLES
1.
The following example:
eld objecta objectb -o objectc
links together the input linkfiles named objecta and objectb to create a program named
objectc.
2.
The following example:
eld -dll -o objecta objectb
creates a DLL whose DLL name is objecta and whose filename is objecta from the
linkfile named objectb.
3.
The following example:
eld obj1.o obj2.o -ul -o lib
links the linkfiles named obj1.o and obj2.o together into a user library named lib.
527188-024
Hewlett Packard Enterprise
3−79
eld(1)
OSS Shell and Utilities Reference Manual
4.
The following example:
eld obj3.o obj4.o -o prog -libname \$A.B.C
links linkfiles named obj3.o and obj4.o together into a program named prog. When prog
runs, it has a user library with the Guardian name $A.B.C. The backslash (\) prevents the
shell from misinterpreting the dollar sign ($).
5.
The following example:
eld obj6.o obj7.o -o prog -set systype guardian
links the linkfiles named obj6.o and obj7.o into a loadfile named prog that you intend to
run as a Guardian process.
6.
The following example:
eld -change highpin off exeobj
changes the value of the HIGHPIN attribute in the loadfile exeobj to OFF.
7.
The following is an example of a valid private DLL registry file:
-- Specify the overall domain area that DLLs
-- can reside in (high to low)
-dllarea 0x68000000 0x60000000
-- Set up two DLLs that overlap each other
-- (one entry manually inserted)
-range $SYSTEM.ZDLL.ABC 0x67D00000 0x100000
-range /bin/usr/don/libmy.lib 0x67D00000 0x300000
FILES
/usr/bin/zimpimp
First default for the import library that represents the implicit DLLs
/usr/lib/zimpimp
Alternate default for the import library that represents the implicit DLLs
/usr/bin/zreg
First default for the public DLL registry file
/usr/lib/zreg
Alternate default for the public DLL registry file
NOTES
In the Guardian version of eld, MAP DEFINE names can be used to identify Guardian files wherever the ELD command allows entry of a filename. The OSS version of eld does not support the
use of MAP DEFINEs. However, OSS filenames used with eld cannot begin with = because eld
uses the = character to identify MAP DEFINEs for expansion into Guardian filenames.
EXIT VALUES
The eld command returns one of the following values:
0 (zero)
No errors or warning conditions were detected.
1
One or more error or warning conditions were detected.
RELATED INFORMATION
Commands: c89(1), c99(1), enoft(1), ld(1), nld(1), noft(1).
Files: float(4).
3−80
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
eld(1)
STANDARDS CONFORMANCE
The eld command is an Hewlett Packard Enterprise extension to the Single UNIX specification
and performs functions comparable to the UNIX ld command.
527188-024
Hewlett Packard Enterprise
3−81
enoft(1)
OSS Shell and Utilities Reference Manual
NAME
enoft - Reads and displays information from TNS/E native object files
SYNOPSIS
enoft
[ -break key on keyboard ]
[ -CD [ dir_pathname1 ] ]
[ { -CLOSE | -CL } { * | filenum | filename } ]
[ -COMMENT [text ] ]
[ -COMP [ref_objfile ] target_objfile [ DETAIL | D ] ]
[ -DBGINFO { proc_addr | proc_spec } ]
[ { -DEMANGLE | -DE } proc_spec ]
[ { -DIR | -FILES } [ dir_pathname2 ] ]
[ { -DUMPADDRESS | -DA } scope [ IN format_spec ] ]
[ { -DUMPALL | -ALL } [ * | LIST ] ]
[ { -DUMPCODE | -DC }
[ { BRIEF | B } | IN format_spec ] ]
[ { -DUMPDATA | -DD }
[ { BRIEF | B } | IN format_spec ] ]
[ { -DUMPOFFSET | -DO } scope
[ IN format_spec ] ]
[ { -DUMPPROC | -DP } proc_spec [ scope ]
[ IN format_spec ] ]
[ { -DUMPSECTION | -DS }
[ * [ DETAIL | D ] | sect_name | sect_num ]
[ IN format_spec ] ]
[ -DWARF [ * | ABBREV |
INFO | LINE [ORDINAL ] | LOC ]
[ -DYNAMIC ]
[ -ENV ]
[ { -EXIT | -E | -QUIT | -Q } ]
[ { -FC | -! } [ hist_num | -hist_offset | text ] ]
[ { -FILE | -F } ref_objfile ]
[ -FILEHDR ]
[ -FUNCDESC | -FD ]
[ -GOT ]
[ -HASH ]
[ -HASHVAL ]
[ { -HELP | ? } [ flag | help_topic ] ]
[ { -HISTORY | -H } [ hist_num ] ]
[ -LAYOUT [ CODE | DATA | * ] ]
[ -LIBLIST ]
[ -LIC ]
[ { -LISTATTRIBUTE | -LA } [ DETAIL | D ] ]
[ { -LISTCOMPILERS | -LC } [ DETAIL | D ] ]
[ { -LISTDATA | -LD } ]
[ { -LISTDEBUG | -LDE }
[ * | { PROC | P } | {DATA | D } ]
[ DETAIL | D ] ]
[ { -LISTEXPORTS | -LE } ]
[ { -LISTFOPEN | -LFO } ]
[ { -LISTOPTIMIZE | -LO }
[0|1|2|*|
{ EXCLUDE | E } | { BRIEF | B } } ]
3−82
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
enoft(1)
[ { -LISTPROC | -LP } { proc_spec | * }
[ { EXCLUDE | E } | { SUBPROC | SP } |
{ NOSUBPROC | NSP } ] [ { DETAIL | D } ] ]
[ { -LISTSOURCE | -LS }
[ * | sourcendx | pathname3 | file_num1 ]
[ { DETAIL | D } ] ]
[ { -LISTUNREFERENCED | -LUR }
{ { PROC | P } | { DATA | D } | * }
[ { DETAIL | D } ] ]
[ { -LISTUNRESOLVED | -LU }
[ { PROC | P } | { DATA | D } | * ]
[ { DETAIL | D } ] ]
[ -LOG [ OFF | pathname4 [ ASCII ] ] ]
[ -NOEXIT ]
[ -OBEY pathname5 ]
[ -OUT [ OFF | pathname6 [ ASCII ] ] ]
[ { -PROCINFO | PI } ]
[ -PROGHDRS ]
[ -RELOC ]
[ -RESET [ set_cmd | * ] ]
[ -RTDU [ { SOURCE | OBJECT | * } [ DETAIL | D ] ] ]
[ -SECTHDRS ]
[ -SET [ set_cmd [ value ] ] ]
[ -SHOW [ set_cmd | * ] ]
[ -STRTAB [ * | DYNSTR | DYNSTR2 | PROCNAMES |
RTDU | SHSTRTAB | STRTAB | UNWIND ]
[ { -SYMTAB | -SYMBOLS } [ * | { EXPORT | E } |
{ PROC | P } | { DATA | D } ]
[ -TANDEMINFO | -TDM ]
[ -UNWIND ]
[ { -UNWINDINFO | UWI }
[ { * | proc_spec } [ DETAIL | D ] ]
[ { -XREFPROC | -XP } { proc_spec | * }
[ CALLEDBY | CALLS | BOTH ]
[ { DETAIL | D } ] ]
...
[ ref_objfile ]
FLAGS
-CD [ dir_pathname1 ]
Changes the working directory enoft uses to search for relative pathnames. The
specified pathname can be absolute or relative; relative pathnames are resolved
using the current working directory.
Files in the Guardian file system can be used if a fully or partially qualified subvolume name is used in OSS pathname format (/G/vol/subvol). A subvolume on
another node can be specified using the OSS pathname format for Expandconnected nodes (for example, a Guardian subvolume is specified as
/E/ode/G/vol/subvol). When dir_pathname1 is omitted, the default is the current
working directory.
This flag is the equivalent of the enoft VOLUME command used in the Guardian
environment. A valid value for pathname_prefix in the Guardian environment is a
fully or partially qualified subvolume name and the default is the current volume
527188-024
Hewlett Packard Enterprise
3−83
enoft(1)
OSS Shell and Utilities Reference Manual
and subvolume.
{ -CLOSE | -CL } { * | filenum | filename }
Closes the specified files:
*
Closes all open files.
filenum
Closes the file specified by the number filenum.
filename
Closes the file specified by filename.
Closinig a log file or out file has the same effect as using the -LOG OFF or
-LOUT OFF flag.
-COMMENT [ text ]
Allows comments in enoft command files. Comments are not displayed in output.
-COMP [ref_objfile] target_objfile [ DETAIL | D ]
Compares the two specified object files for major differences, including file
headers and program headers. DWARF symbol tables are not compared.
If ref_objfile is not specified, the current object file is used to compare with
target_objfile.
DETAIL or D provides additional, detailed information.
-DBGINFO { proc_addr | proc_spec }
Lists compilation source and debug file information for a given procedure name,
index, or address. When proc_addr is used, the line number and instruction bundle address are also listed. If neither proc_addr nor proc_spec are specified, all
procedures are listed.
proc_addr
Specifies the hexadecimal value of a code section address to be listed.
This value must have the form 0xxxxxxxxx, where x is a hexadecimal
digit. If the value specified is not on a 16-byte alignment boundary,
enoft rounds the address down to the beginning of the address bundle.
If line number information for the bundle is not available, enoft displays
information from the nearest preceding bundle with line number information. Demangled names are listed when possible.
proc_spec
Specifies the procedure name or procedure number. Procedure names
are case-sensitive. proc_spec is one of the following:
proc_name
Limits the scope to the specified procedure and subprocedures. The demangled form of the procedure name cannot
be used because enoft does not support blank spaces in the
name.
proc_num
Specifies the procedure number. This number specifies the
ordering in the object file’s procedure table. Use the
-LISTPROC flag to list each procedure number.
This command is used for loadfiles and import libraries.
3−84
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
enoft(1)
{ -DEMANGLE | -DE } proc_spec
Displays the C++ symbol name specified by proc_spec in demangled format. An
object file does not need to be open before using this flag.
proc_spec
Specifies the procedure name or procedure number. Procedure names
are case-sensitive. proc_spec is one of the following:
proc_name
Limits the scope to the specified procedure and subprocedures. The demangled form of the procedure name cannot
be used because enoft does not support blank spaces in the
name.
proc_num
Specifies the procedure number. This number specifies the
ordering in the object file’s procedure table. Use the -LISTPROC flag to list each procedure number.
{ -DIR | -FILES } [ dir_pathname2 ]
Lists the files in the specified directory. The specified pathname can be absolute
or relative; relative pathnames are resolved using the current working directory.
Files in the Guardian file system can be listed if a fully or partially qualified subvolume name is used in OSS pathname format (/G/vol/subvol). A subvolume on
another node can be specified using the OSS pathname format for Expandconnected nodes (for example, a Guardian subvolume is specified as
/E/ode/G/vol/subvol). When dir_pathname2 is omitted, the default is the current
working directory.
{-DUMPALL | -ALL } [ * | LIST ]
Displays all nonzero size sections in the object file, including the file, program,
and section headers. The sections are displayed in the order of their relative file
offsets. When you do not specify an option, the display is similar to the output of
the -LAYOUT flag but shows the section contents.
Unlike the -DUMPSECTION * DETAIL flag, output stops when an underlying
dump command fails (for example, when a data error occurs).
*
Also lists the layout of the sections, a list of common file attributes, compiler information, various symbols, optimization levels,
procedures, and source files.
If the -DUMPALL flag is used on an OSS shell command line,
the flag specification must be enclosed in quotation marks when
the * specifier is used.
LIST
Only lists the file, program, and section headers, the layout of the
sections, a list of common file attributes, compiler information,
various symbols, optimization levels, procedures, and source files.
{-DUMPADDRESS | -DA } scope [ IN format_spec ]
Displays code and data from a virtual address inside an object file’s memory
space. scope is the following:
start_address [range_spec ]
527188-024
Hewlett Packard Enterprise
3−85
enoft(1)
OSS Shell and Utilities Reference Manual
start_address
Specifies the starting virtual address. The value specified is assumed to
be in decimal format unless prefixed by 0x to make it hexadecimal format. For ICODE or INNERLIST displays, start_address must be on a
16-byte boundary; for all other formats, enoft rounds the specified
address down to the beginning of the bundle to be displayed.
range_spec
Specifies the amount of information to display. range_spec is one of the
following:
TO end_address
Is the ending virual address. The value specified is assumed
to be in decimal format unless prefixed by 0x to make it hexadecimal format. For ICODE or INNERLIST displays,
end_address must be on a 16-byte boundary; for all other formats, enoft rounds the specified address down to the beginning of the next bundle.
Valid values must be within the same section as the
start_address. If the scope of the output is limited by another
flag to a single procedure, only values within that procedure
are valid.
If you omit TO end_address, only one 4-byte or 16-byte unit
is displayed.
FOR number [ { BYTES | B } | {UNITS | U } ]
Is the number of bytes or units (4-byte or 16-byte groups) to
display. Valid values for number can be in decimal or hexadecimal format. The value specified is assumed to be in decimal
format unless prefixed by 0x to make it hexadecimal format.
If BYTES, B, UNITS, or U is omitted, the number displayed
is the specified multiple of an 8-bit value, depending on the
part of the object file being displayed; code instructions in a
code section are displayed in multiples of 16-byte bundles,
while all other data is displayed in multiples of 4 bytes.
FOR * [ { BYTES | B } | {UNITS | U } ]
Displays information to the end of the procedure, subprocedure, or section. If BYTES, B, UNITS, or U is omitted,
code instructions in a code section are displayed in multiples
of 16-byte bundles, while all other data is displayed in multiples of 4 bytes.
If you use the -DUMPADDRESS flag on an OSS shell command line, the flag specification must be enclosed in quotation
marks when you use the FOR * specifier.
3−86
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
enoft(1)
IN format_spec
Specifies how the information is to be formatted. format_spec is one of
the following:
ASCII | A
Displays portions of the object file in ASCII format.
DECIMAL | D
Displays portions of the object file in decimal format.
HEX | H
Displays portions of the object file in hexadecimal format.
ICODE | IC Displays portions of the object file in disassembled program code. This is the default format.
INNERLIST | IN
Displays portions of the object file in disassembled code
and displays the source code interspersed with the assembler. This option can be used only for dumping text.
READABLE | R
Displays portions of the object file in an applicable format based on the item type and part of the object file
being displayed. This is the default action.
{-DUMPCODE | -DC } [ { BRIEF | B } | IN format_spec ]
Displays all code from the .gateway, .plt, .text, and .restext sections of an object
file.
Specifying the BRIEF or B option is the same as specifying the -LAYOUT
CODE flag.
Valid values for format_spec are identical to those of the -DUMPADDRESS flag.
If you omit IN format_spec, the display is formatted in ICODE format.
{-DUMPDATA | -DD } [ { BRIEF | B } | IN format_spec ]
Displays all initialized user data from the .data, .sdata, .rdata, and .rconst sections of an object file.
Specifying the BRIEF or B option is the same as specifying the -LAYOUT
DATA flag.
Valid values for format_spec are identical to those of the -DUMPADDRESS flag.
If you omit IN format_spec, the display is formatted in HEX format.
{-DUMPOFFSET | -DO } scope [ IN format_spec ]
Displays code and data from a physical offset within an object file. Valid values
for scope are identical to those of the -DUMPADDRESS flag, except that the
addresses are physical offsets within the file instead of virtual addresses. Valid
values for format_spec are identical to those of the -DUMPADDRESS flag.
{-DUMPPROC | -DP } proc_spec [ scope ] [ IN format_spec ]
Displays the contents of a procedure or part of a procedure.
proc_spec
Specifies the procedure name or procedure number. Procedure names
are case-sensitive in C and C++ but not in other languages. proc_spec
is one of the following:
527188-024
Hewlett Packard Enterprise
3−87
enoft(1)
OSS Shell and Utilities Reference Manual
proc_name
Limits the scope to the specified procedure and subprocedures.
If proc_name is not completely specified, enoft resolves the
name and lists conforming procedure names with numbers;
wildcard matching (for example, *partial_name or
partial_name*) can be used to search for items containing a
match to the given pattern but only the first match found is
displayed.
The demangled form of the procedure name cannot be used
because enoft does not support blank spaces in the name.
proc_name.subproc_name[[.subprocname]...]]
Limits the scope to the specified subprocedure. If proc_name
or subproc_name is not completely specified, enoft resolves
the name and lists conforming subprocedure names with
numbers.
This option is not valid for C or C++ programs. For EpTAL
programs, only one level of subprocedure can be specified.
For COBOL programs, more than one level can be specified.
subproc_name[[.subprocname]...]]
Limits the scope to the specified subprocedure. If
subproc_name is not completely specified, enoft resolves the
name and lists conforming subprocedure names with numbers.
This option is not valid for C or C++ programs. For EpTAL
programs, only one level of subprocedure can be specified.
For COBOL programs, more than one level can be specified.
Only the first subprocedure with the specified name is
displayed.
proc_num
Specifies the procedure number. This number specifies the
ordering in the object file’s procedure table. Use the -LISTPROC flag to list each procedure number.
scope
Specifies addresses in a form that is identical to that of the
-DUMPADDRESS flag, except that the addresses are virtual offsets
within the file instead of virtual addresses.
IN format_spec
Specifies how the information is to be formatted. Valid values for
format_spec are identical to those of the -DUMPADDRESS flag.
{-DUMPSECTION | -DS } [ * [ DETAIL | D ] | sect_name | sect_num ] [ IN format_spec ]
Displays the specified section of the object file. If you omit all options, the default
display lists the sections in the file.
Valid display options are:
*
Displays all sections of the object file except the file, program,
and section headers. If DETAIL or D is also specified, only
nonzero size sections are displayed.
If you use the -DUMPSECTION flag on an OSS shell command
3−88
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
enoft(1)
line, the flag specification must be enclosed in quotation marks
when you use the * specifier.
sect_name
Specifies any valid section name, as displayed by the
-SECTHDRS or -LAYOUT flag.
sect_num
Specifies any valid section number, as displayed by the
-SECTHDRS flag.
IN format_spec
Specifies how the information is to be formatted. format_spec is
one of the following:
ASCII | A
Displays portions of the object file in ASCII format.
DECIMAL | D
Displays portions of the object file in decimal format.
HEX | H
Displays portions of the object file in hexadecimal
format.
ICODE | IC Displays portions of the object file in disassembled
program code. This is the default format.
INNERLIST | IN
Displays portions of the object file in disassembled
code and displays the sourc e code interspersed
with the assembler. This option can be used only
for dumping text.
READABLE | R
Displays portions of the object file in the format
most appropriate to the type of data. This is the
default action.
-DWARF [ * | ABBREV | INFO | LINE [ ORDINAL ] | LOC ]
Displays the contents of the Debugging With Attribute Record Format (DWARF)
debugging symbol table sections of an object file. These sections provide the
symbolic information used by the Visual Inspect and Native Inspect debuggers.
*
Displays the contents of the .debug_info, .debug_abbrev, and
.debug_line sections.
ABBREV
Displays only the contents of the .debug_abbrev section.
INFO
Displays only the contents of the .debug_info section, as constrained by the -SET SCOPEPROC flag.
LINE [ ORDINAL ]
Displays only the contents of the line number table (.debug_line)
section. If a .debug_line_nsk section exists to support the use of
Guardian EDIT utility line numbers, that section is displayed
instead. To force display of .debug_line instead of
.debug_line_nsk, specify the ORDINAL option.
527188-024
Hewlett Packard Enterprise
3−89
enoft(1)
OSS Shell and Utilities Reference Manual
LOC
Displays only the contents of the .debug_loc section.
-DYNAMIC
Displays the .dynamic section of a loadfile or import library.
-ENV
Displays the current settings of the enoft environment.
{-FILE | -F } ref_objfile
Specifies the name of the target object file you want to use with enoft. ref_objfile
can be a simple filename or an absolute or relative pathname.
A subsequent -FILE flag closes the current object file and opens the newly
specified object file.
-FILEHDR
Displays the contents of the Executable and Linking Format (ELF) file header
from the beginning of the object file.
-FUNCDESC | -FD
Displays the contents of the .IA_64.pltoff and .fptr function descriptor sections of
a loadfile.
-GOT
Displays the global offset table section of a loadfile.
-HASH
Displays the contents of the .hash and .hash.gblzd sections of a loadfile.
-HASHVAL
Displays the contents of the .hasval and .hashval.gblzd sections of a loadfile.
{-HELP | ? } [ flag | help_topic ]
Displays descriptions and syntax for enoft flags and operands. If no value is
specified for flag or help_topic, enoft displays a single line description of each
enoft flag. This information can be directed to an output file or log file.
flag
Displays information about the specified flag, including syntax.
flag can be any valid command name or command abbreviation.
help_topic
Specifies one of the following enoft topics for which you want
detailed information:
CMD_TYPE
CMD_ENTRY
OBJECT_FILES
FORMAT_SPEC
PROC_SPEC
SCOPE_RANGE
SOURCE_SPEC
-LAYOUT [ CODE | DATA | * ]
Lists the parts of an object file in order by file offset, along with their virtual
addresses.
3−90
CODE
Lists only code sections.
DATA
Lists only data sections.
*
Lists both code and data sections. If you omit an option for this
flag, this is the default action.
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
enoft(1)
-LIBLIST
Displays the .liblist section of a loadfile or import library. This flag is an alias for
specification of the -DUMPSECTION flag with the section_name value of .liblist.
-LIC
Displays the library import characterization (LIC) section .lic of a preset loadfile.
This flag is an alias for specification of the -DUMPSECTION flag with the
section_name value of .lic.
{-LISTATTRIBUTE | -LA } [ { DETAIL | D } ]
Lists common file and process attributes associated with an object file. DETAIL
or D provides additional, detailed information about the debugging sections of the
file.
{-LISTCOMPILERS | -LC } [ { DETAIL | D } ]
Lists version information about the native compiler components and eld utility
used to create an object file. DETAIL or D provides additional, detailed information.
{ -LISTDATA | -LD }
This flag is an alias for the -SYMTAB DATA flag. It lists all data symbols from
the .dynsym and .dynsym.gblzd sections in a loadfile or import library, and the
.symtab section in a linkfile.
{ -LISTDEBUG | -LDE } [ * | { PROC | P } | {DATA | D } ] [ DETAIL | D ] ]
Lists all names in the .debug_info symbols table that meets variable (data) or subprogram (subprogram, subroutine, or alternate entry point) criteria. Specifying
PROC, P, DATA,or D restricts the content of the listing to procedures or data; the
default is *, meaning all. DETAIL or D provides additional, detailed information.
{ -LISTEXPORTS | -LE }
This flag is an alias for the -SYMTAB EXPORT flag. This flag lists all exported
symbols that are global and defined from the .dynsym and .dynsym.gblzd sections in a loadfile or import library. Symbols available only to other linkfiles and
local to loadfiles (not exported) are not listed.
{-LISTFOPEN | -LFO }
Lists the file numbers and filenames of all open files including object files, log
files, and out files.
{-LISTOPTIMIZE | -LO } [ 0 | 1 | 2 | * | { EXCLUDE | E } | { BRIEF | B } ]
Lists procedures based on their optimization level. If no option is specified, all
procedures in the object file are displayed, sorted by optimization level.
0, 1, or 2 List only procedures with an optimization level corresponding to the
specified number.
*
List all procedures sorted by optimization level. If the -LISTOPTIMIZE flag is used on an OSS shell command line, the flag specification
must be enclosed in quotation marks when the * specifier is used.
EXCLUDE | E
List all procedures sorted by optimization level but does not display
information for symbols generated by a compiler or not found in a
debug_info section.
527188-024
Hewlett Packard Enterprise
3−91
enoft(1)
OSS Shell and Utilities Reference Manual
BRIEF | B
Limit the display to counts of symbols matching the scope.
{-LISTPROC | -LP } { proc_spec | * }
[ { EXCLUDE | E } | { SUBPROC | SP } | { NOSUBPROC | NSP } ]
[ { DETAIL | D } ]
Lists procedures and their subprocedures.
proc_spec
Specifies the procedure name or procedure number. Procedure
names are case-sensitive in C and C++ but not in other
languages. proc_spec is one of the following:
proc_name
Limits the scope to the specified procedure and subprocedures. If proc_name is not completely specified,
enoft resolves the name and lists conforming procedure names with numbers. Wildcard matching (for
example, *partial_name or partial_name*) can be
used to search for items containing a match to the
given pattern.
The demangled form of the procedure name cannot be
used because enoft does not support blank spaces in
the name.
proc_name.subproc_name[[.subproc_name]...]
Limits the scope to the specified subprocedure. If
proc_name or subproc_name is not completely
specified, enoft resolves the name and lists conforming
subprocedure names with numbers.
This option is not valid for C or C++ programs. For
EpTAL programs, only one level of subprocedure can
be specified. For COBOL programs, more than one
level can be specified.
subproc_name[[.subproc_name]...]
Limits the scope to the specified subprocedure. If
subproc_name is not completely specified, enoft
resolves the name and lists conforming subprocedure
names with numbers.
This option is not valid for C or C++ programs. For
EpTAL programs, only one level of subprocedure can
be specified. For COBOL programs, more than one
level can be specified. Only the first subprocedure
with the specified name is displayed.
proc_num
Specifies the procedure number. This number specifies
the ordering in the object file’s procedure table. Use
the -LISTPROC flag to list each procedure number.
3−92
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
*
enoft(1)
Specifies all procedures in the current scope. If the -LISTPROC flag is used on an OSS shell command line, the flag
specification must be enclosed in quotation marks when the *
specifier is used.
The content of the display can be controlled with the following options:
EXCLUDE | E Suppresses display of information for symbols generated by a
compiler or not found in a .debug_info section.
SUBPROC | SP
Does not list parent procedures along with subprocedures. If procedure P contains subprocedure S, a -LISTPROC S SUBPROC
flag lists only S and not P, even though S is contained within P.
NOSUBPROC | NSP
Does not list subprocedures along with parent procedures. If procedure P contains subprocedure S, a -LISTPROC P NOSUBPROC flag lists only P and not S, even though S is contained
within P.
DETAIL | D
Provides additional, detailed information about procedures and
subprocedures.
{-LISTSOURCE | -LS } [ sourcendx | pathname3 | file_num1 | * ]
[ { DETAIL | D } ]
Lists compilation unit entries in the object file for a unit index value, for a source
file, or for all source files used. If only one procedure is dumped, then the -LISTSOURCE flag dumps the entry for the source file containing the procedure.
sourcendx
Narrows the scope to a single compilation unit within the object
file. sourcendx must be a valid index value. Use the -LISTSOURCE flag to determine valid values.
pathname3
Narrows the scope to a single named source file. pathname3 must
be a fully qualified OSS pathname or a fully qualified Guardian
filename.
file_num1
Specifies the file number. This number is determined by the order
of procedures in the object files’s procedure table.
*
Specifies that you want information for all procedures. This is the
default action.
If the -LISTSOURCE flag is used on an OSS shell command
line, the flag specification must be enclosed in quotation marks
when the * specifier is used.
DETAIL | D
Displays additional, detailed information about the procedures.
{-LISTUNREFERENCED | -LUR } { { PROC | P } | { DATA | D } | * } [ { DETAIL | D } ]
Lists the undefined and unreferenced symbols in an object file; this flag is only
valid for pTAL object files. These symbols must be linked before the object file
can be executed.
PROC | P
527188-024
Displays unresolved procedures.
Hewlett Packard Enterprise
3−93
enoft(1)
OSS Shell and Utilities Reference Manual
DATA | D
Displays unresolved data items.
*
Displays all unresolved items. When you do not specify an option,
this is the default behavior.
If the -LISTUNREFERENCED flag is used on an OSS shell command line, the flag specification must be enclosed in quotation
marks when the * specifier is used.
DETAIL | D Displays additional, detailed information such as the type of each
symbol. For C++ functions, DETAIL provides the &quot;demangled&quot;
(original) names as well as the &quot;mangled&quot; internal equivalents.
{-LISTUNRESOLVED | -LU } [ { PROC | P } | { DATA | D } | * ] [ { DETAIL | D } ]
Lists the undefined names in an object file. These references must be resolved
before the file can be executed.
PROC | P
Displays unresolved procedures.
DATA | D
Displays unresolved data items.
*
Displays unresolved procedures and data items. When you do not
specify an option, this is the default behavior.
If the -LISTUNRESOLVED flag is used on an OSS shell command line, the flag specification must be enclosed in quotation
marks when the * specifier is used.
DETAIL | D Displays detailed name information.
-LOG [ OFF | pathname4 [ ASCII ] ]
Writes a copy of the current session’s input and output to a file.
-NOEXIT
OFF
Closes the current log file and stops all logging. This is the default
action.
pathname4
Identifies the file to receive the copy of the command lines and output. If the file does not exist, enoft creates it. If the file already
exists, enoft appends output to the end of the file.
ASCII
Creates the log file as a file code 180 file in C text (ASCII) format
instead of creating it as a code 101 file in its default EDIT file format. This option is valid only for use in the Guardian environment;
the default log file format in the OSS environment is ASCII text.
Runs enoft in interactive mode. After executing any commands preceding it on
the command line, this flag causes enoft to issue a prompt and wait for additional
input. Commands following -NOEXIT on the command line are ignored. Any
previous commands that cannot apply to interactive mode are ignored; for example, -SET LINES is ignored.
The NOEXIT command is ignored while in interactive mode.
-OBEY pathname5
Directs enoft to read command lines from the file specified in pathname5. In the
Guardian file system, the specified file must be an EDIT file (file code 101). The
specified file can call other OBEY files; OBEY files can be nested to any depth.
The specified file cannot call itself and files it calls cannot call it or themselves;
OBEY files cannot be recursive.
3−94
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
enoft(1)
-OUT [ OFF | pathname6 [ ASCII ]
Directs the input and output listings to a specified file.
OFF
Turns off redirection to a file and reverts to the original output file.
This is the default action.
pathname6
Specifies the partially or fully qualified name of the file. If the file
does not exist, enoft creates it. If the file already exists, enoft
appends output to the end of the file.
ASCII
Creates the log file as a file code 180 file in C text (ASCII) format
instead of creating it as a code 101 file in its default EDIT file format. This option is valid only for use in the Guardian environment; the default log file format in the OSS environment is ASCII
text.
-PROCINFO | PI
Displays the contents of the .procinfo section of a linkfile. This flag is an alias for
specification of the -DUMPSECTION flag with the section_name value of .procinfo.
-PROGHDRS Displays the contents of the program headers for a loadfile or import library.
-RELOC
Displays the relocation tables in an object file. These tables are in sections with
names that begin with .rela.
-RESET [ set_cmd | * ]
Resets the target object file attributes previously specified with the -SET flag to
their default values.
set_cmd
Is one of the following target object file attributes:
CASE
DEMANGLE
FORMAT
HISTORYBUFFER
HISTORYWINDOW
LINES
SCOPEPROC
SCOPESOURCE
SORT
*
Specifies that all target object file attributes are reset to their
default values. If you use the -RESET flag without specifying any
value, this is the default action.
If you use the -RESET flag on an OSS shell command line, the flag
specification must be enclosed in quotation marks when you use
the * specifier.
Refer to the description of the -SET flag for descriptions of these object file attributes.
-RTDU [ { SOURCE | OBJECT | * } [ DETAIL | D ] ]
Displays the header information for the run-time data unit (RTDU) sections of the
object file. Linkfiles have only a .source.rtdu section, while loadfiles have both
.source.rtdu and .object.rtdu sections.
If SOURCE is specified, only the .source.rtdu section is displayed. If OBJECT
527188-024
Hewlett Packard Enterprise
3−95
enoft(1)
OSS Shell and Utilities Reference Manual
is specified, only the .object.rtdu section is displayed. If * is specified or all
options are omitted, all available sections are displayed.
If DETAIL or D is specified, the memory content of the RTDU section for each
record is also displayed.
-SECTHDRS Displays the contents of the section headers for a loadfile.
-SET [ set_cmd [ value ] ]
Sets an enoft target object file attribute to the specified value. If you do not
specify value, enoft displays the current value used for the set_cmd attribute. If
you do not specify set_cmd, enoft displays the current settings for all attributes.
The -SET flag can be abbreviated by combining it with letters that abbreviate
set_cmd attribute names; these abbreviated flags are shown in the following list of
valid set_cmd attribute names:
{CASE | -SC } { ON | OFF }
Specifies the case sensitivity of the enoft environment.
ON
Turns on case sensitivity in the enoft environment.
OFF
Turns off case sensitivity in the enoft environment.
This is the default setting.
If case sensitivity is turned off, some file and procedure
names might not be correctly matched when commands
or flags are entered.
If the target object file contains C or C++ code, enoft automatically turns on case sensitivity when the file is opened. For object
files containing code from a mix of C or C++ and other languages,
if the procedure or source scope for a flag or command is restricted to a source file that does not contain C or C++ code, case
sensitivity is turned off but reverts to on when the scope restriction is removed.
{FORMAT | -SF } { { ASCII | A } | { DECIMAL | D }
| { HEX | H} | { ICODE | IC } | { INNERLIST | IN } |
{ READABLE | R } }
Specifies the format used to display the object file.
ASCII | A
Displays portions of the object file in ASCII format.
DECIMAL | D
Displays portions of the object file in decimal format.
HEX | H
Displays portions of the object file in hexadecimal
format.
ICODE | IC Displays portions of the object file in disassembled
program code.
3−96
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
enoft(1)
INNERLIST | IN
Displays portions of the object file in disassembled
program code and displays the source code interspersed with the assembler. This option can be
used only for text dumps.
READABLE | R
Displays portions of the object file in an applicable
format based on the item type and part of the
object file being displayed. This is the default
action.
Specifying IN format_spec in another flag overrides the setting of
this attribute.
{HISTORYBUFFER | -SHB } number
Specifies the number of command lines in memory that are to be
available to the !, FC, or HISTORY subcommands. If the HISTORYBUFFER attribute is not specified, the default value is 50
command lines.
Valid values for number are in the range from 0 (zero) to 65535.
If number is greater than the current buffer size, enoft is unable to
retrieve command lines that have already left the history buffer.
If number is smaller than the current buffer size, the command
lines lost from the buffer are not retrievable.
The HISTORYBUFFER setting is only meaningful when you
use enoft interactively.
{HISTORYWINDOW | -SHW } number
Specifies the number of command lines displayed with the HISTORY subcommand.
Valid values for number are in the range from 0 (zero) to 50. If
the HISTORYWINDOW attribute is not specified, the default
value is 10 command lines.
The HISTORYWINDOW setting is only meaningful when you
use enoft interactively.
{ LINES | -SL } number
Specifies the number of lines of output to display before pausing
so that an area of output does not scroll out of the terminal or
emulator display memory. A single line of output from enoft can
result in multiple lines of output on a screen, so more lines than
are specified by number might be displayed.
Valid values for number are in the range 0 (zero) through 65535.
If the LINES attribute is not specified, the default value for
number is zero. A zero value causes output to continue until all
results are displayed.
This flag is ignored when entered on a command line. It is primarily for interactive use.
527188-024
Hewlett Packard Enterprise
3−97
enoft(1)
OSS Shell and Utilities Reference Manual
{ SCOPEPROC | -SSP } { proc_spec | * }
Narrows the scope to a single procedure or subprocedure. This is
helpful when trying to find unique items within a procedure or
subprocedure and when trying to limit output to a range within a
single scope.
The setting of this attribute takes precedence over any other value
of proc_spec used in the same command.
proc_spec
Specifies the procedure name or procedure number. Procedure names are case-sensitive in C and C++ but not in
other languages. proc_spec is one of the following:
proc_name
Limits the scope to the specified procedure
and subprocedures. If proc_name is not completely specified, enoft resolves the name and
lists conforming procedure names with
numbers; wildcard matching (for example,
*partial_name or partial_name*) can be used
to search for items containing a match to the
given pattern.
The demangled form of the procedure name
cannot be used because enoft does not support blank spaces in the name.
proc_name.subproc_name[[.subproc_name]...]
Limits the scope to the specified subprocedure. If proc_name or subproc_name is not
completely specified, enoft resolves the name
and lists conforming subprocedure names
with numbers.
This option is not valid for C or C++ programs. For EpTAL programs, only one level
of subprocedure can be specified. For
COBOL programs, more than one level can
be specified.
subproc_name[[.subproc_name]...]
Limits the scope to the specified subprocedure. If subproc_name is not completely
specified, enoft resolves the name and lists
conforming subprocedure names with
numbers.
This option is not valid for C or C++ programs. For EpTAL programs, only one level
of subprocedure can be specified. For
COBOL programs, more than one level can
be specified. Only the first subprocedure with
the specified name is displayed.
3−98
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
enoft(1)
proc_num
Specifies the procedure number. This number
specifies the ordering in the object file’s procedure table. Use the -LISTPROC flag to list
each procedure number.
*
Eliminates any scope limitations and allows you to view
the entire object file. If you use the -SET
SCOPEPROC flag on an OSS shell command line, the
flag specification must be enclosed in quotation marks
when you use the * specifier.
{ SCOPESOURCE | -SSS } { sourcendx | pathname7 | file_num2 | * }
Narrows the scope to a single compilation unit or source file,
which is helpful when trying to find unique items within a source
file, as well as limiting the output to a range within the designated
scope.
sourcendx Narrows the scope to a single compilation unit within
the object file. sourcendx must be a valid index
value. Use the -LISTSOURCE flag to determine
valid values.
pathname7 Narrows the scope to a single named source file for
the object file. pathname7 must be a fully qualified
OSS pathname or a fully qualified Guardian filename.
Wildcard matching (for example, *partial_name or
partial_name*) can be used to search for items containing a match to the given pattern.
file_num2
Specifies the file number. This number specifies the
ordering of file use in the object file. Use the
-LISTSOURCE flag to list each file number.
*
Eliminates any scope limitations present and opens
selections to the entire object file. This is the default
action.
If you use the -SET SCOPESOURCE flag on an
OSS shell command line, the flag specification must
be enclosed in quotation marks when you use the *
specifier.
The setting of this attribute takes precedence over any other
source file pathname or file number used in the same command.
{ SORT | -ST } { { ALPHA | A } | { LOC | L } | { NONE | N } }
Specifies the sorting order of the output.
ALPHA | A
Sorts enoft output in alphabetic order.
LOC | L Sorts enoft output in virtual address order.
527188-024
Hewlett Packard Enterprise
3−99
enoft(1)
OSS Shell and Utilities Reference Manual
NONE | N
Sorts enoft output in numeric order determined in the
relevant table. The default value is NONE.
-SHOW [ * | set_cmd ]
Displays the current value of the specified enoft program environment parameter
and the target object file parameter.
The * specifier indicates that all of the attributess should be displayed. This is the
default action.
If you use the -SHOW flag on an OSS shell command line, the flag specification
must be enclosed in quotation marks when you use the * specifier.
-STRTAB [ * | DYNSTR | DYNSTR2 | PROCNAMES
| RTDU | SHSTRTAB | STRTAB | UNWIND ]
Displays the contents of string tables in the object file.
*
Displays all available string tables in the object file. If you omit
an option for this flag, this is the default action.
DYNSTR
Displays the .dynstr section pointed to from the .dynsym section.
DYNSTR2
Displays the .dynstr2 section pointed to from the .dynamic, .liblist, and .dynsym.gblzd sections.
PROCNAMES
Displays the .procnames section pointed to from the .procinfo
section.
RTDU
Displays the .rtdu section.
SHSTRTAB
Displays the .shstrtab section.
STRTAB
Displays the .strtab section pointed to from the .symtab section.
UNWIND
Displays the .unwind.strings section pointed to from the .unwind
section.
{-SYMTAB | -SYMBOLS} [ * | { EXPORT | E } | { PROC | P } | { DATA | D } ]
Displays the specified contents of the .symtab table and of the .dynsym and
.dynsym.gblzd tables for a loadfile or import library.
*
Specifies all exported, data, and code symbols in the tables. If
you use the -SYMTAB or -SYMBOLS flag on an OSS shell command line, the flag specification must be enclosed in quotation
marks when you use the * specifier.
EXPORT or E Specifies only exported symbols that are global and defined.
PROC or P
Specifies only code symbols.
DATA or D
Specifies only data symbols.
-TANDEMINFO | -TDM
Displays the contents of the .tandem_info section of a loadfile or import library.
The information displayed includes the export digest for a DLL. This flag is an
alias for specification of the -DUMPSECTION flag with the section_name value
of .tandem_info.
3−100
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
-UNWIND
enoft(1)
Displays the contents of the .IA_64.unwind sections of stack unwinding information for a linkfile or loadfile.
{-UNWINDINFO | UWI} [ { * | proc_spec } [ DETAIL | D ] ]
Displays the contents of the .IA_64.unwind_info sections of stack unwinding
information in both linkfiles and loadfiles.
DETAIL or D provides additional, detailed information.
proc_spec
Specifies the procedure name or procedure number. Procedure names
are case-sensitive in C and C++ but not in other languages. proc_spec
is one of the following:
proc_name
Limits the scope to the specified procedure and subprocedures. If proc_name is not completely specified, enoft
resolves the name and lists conforming procedure names with
numbers. Wildcard matching (for example, *partial_name or
partial_name*) can be used to search for items containing a
match to the given pattern.
The demangled form of the procedure name cannot be used
because enoft does not support blank spaces in the name.
proc_name.subproc_name[[.subproc_name]...]
Limits the scope to the specified subprocedure. If proc_name
or subproc_name is not completely specified, enoft resolves
the name and lists conforming subprocedure names with
numbers.
This option is not valid for C or C++ programs. For EpTAL
programs, only one level of subprocedure can be specified.
For COBOL programs, more than one level can be specified.
subproc_name[[.subproc_name]...]
Limits the scope to the specified subprocedure. If
subproc_name is not completely specified, enoft resolves the
name and lists conforming subprocedure names with numbers.
This option is not valid for C or C++ programs. For EpTAL
programs, only one level of subprocedure can be specified.
For COBOL programs, more than one level can be specified.
Only the first subprocedure with the specified name is
displayed.
proc_num
Specifies the procedure number. This number specifies the
ordering in the object file’s procedure table. Use the -LISTPROC flag to list each procedure number.
527188-024
Hewlett Packard Enterprise
3−101
enoft(1)
OSS Shell and Utilities Reference Manual
{-XREFPROC | -XP } { proc_spec | * }
[ CALLEDBY | CALLS | BOTH ] [ { DETAIL | D } ]
Displays an alphabetical cross-reference listing of procedures.
proc_spec
Specifies the procedure name or procedure number. Procedure
names are case-sensitive in C and C++ but not in other languages.
proc_spec is one of the following:
proc_name
Limits the scope to the specified procedure and subprocedures. If proc_name is not completely specified, enoft
resolves the name and lists conforming procedure names
with numbers. Wildcard matching (for example,
*partial_name or partial_name*) can be used to search
for items containing a match to the given pattern.
The demangled form of the procedure name cannot be
used because enoft does not support blank spaces in the
name.
proc_name.subproc_name[[.subproc_name]...]
Limits the scope to the specified subprocedure. If
proc_name or subproc_name is not completely specified,
enoft resolves the name and lists conforming subprocedure names with numbers.
This option is not valid for C or C++ programs. For
EpTAL programs, only one level of subprocedure can be
specified. For COBOL programs, more than one level
can be specified.
subproc_name[[.subproc_name]...]
Limits the scope to the specified subprocedure. If
subproc_name is not completely specified, enoft resolves
the name and lists conforming subprocedure names with
numbers.
This option is not valid for C or C++ programs. For
EpTAL programs, only one level of subprocedure can be
specified. For COBOL programs, more than one level
can be specified. Only the first subprocedure with the
specified name is displayed.
proc_num
Specifies the procedure number. This number specifies
the ordering in the object file’s procedure table. Use the
-LISTPROC flag to list each procedure number.
*
3−102
Specifies all procedures in the current scope. If you use the
-XREFPROC flag on an OSS shell command line, the flag
specification must be enclosed in quotation marks when you use
the * specifier.
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
enoft(1)
CALLEDBY Lists each procedure and the procedures that call it. A scope setting restricts the procedures that are the children of the given procedure. If you omit an option for this flag, this is the default action.
CALLS
Lists each procedure and the procedures that it calls. A scope setting restricts the procedures that are the parents of the given procedure.
BOTH
Lists the information for both CALLEDBY and CALLS.
DETAIL | D Lists the called or calling procedures referenced by the indicated
procedures and the addresses where the calls are made. For C++
procedures, this option also provides the original external (&quot;demangled&quot;) names as well as the internal (&quot;mangled&quot;) equivalents used.
The virtual addresses of the call sites are shown with the DETAIL option
specified. A SORT setting affects both lists and sublists of procedures.
Operands
ref_objfile
Specifies the target object file. This operand is required unless you use the -FILE
flag.
DESCRIPTION
The enoft utility reads and displays information from TNS/E native object files. enoft enables you
to:
•
Determine the optimization level of procedures in a file.
•
Display object code with corresponding source code.
•
Display specific sections of a loadfile, linkfile, or library. Using this capability requires
knowledge of the structure and content of TNS/E object files, as described in the eld and
rld Manual.
•
List dynamic-link library (DLL) references in an object file.
•
List object file attributes.
You can display the following object file components with enoft:
•
Various file headers
•
Program text and data segments
•
Symbol table and relocation tables
These enoft capabilities are useful when developing and debugging programs.
The enoft utility can be used from the command line or interactively to examine object files. To
use enoft interactively, enter the enoft command without specifying any flags; you can then
specify the flags interactively as subcommands in the manner described in the SUBCOMMANDS
subsection of this reference page. Alternatively, enoft launches and runs as an interactive process
if the -NOEXIT flag is specified on the command line.
To use enoft from a command file, capture the flags listed in the FLAGS subsection of this reference page or the subcommands listed in the SUBCOMMANDS subsection of this reference page.
Capture one flag or subcommand per line in the command file and then specify the command file
as the standard input file to the enoft command using a redirection operator. Output can also be
redirected to a file. The effective syntax for the enoft command in this instance is:
527188-024
Hewlett Packard Enterprise
3−103
enoft(1)
OSS Shell and Utilities Reference Manual
enoft &lt; command_file [ &gt; output_file ]
For complete information on using enoft, refer to the enoft Manual.
SUBCOMMANDS
enoft supports all flags listed in the SYNOPSIS section as subcommands for interactive use. Such
subcommands consist of the flag without the prefixed dash (-).
The following subcommands are primarily for interactive use. These subcommands can be
entered as OSS shell command line flags when prefixed by a dash (-) but are only meaningful
when used interactively:
break key on keyboard
Interrupts the processing of the current subcommand as soon as possible without
corrupting any enoft internal tables. The enoft utility resumes operation with the
next subcommand line.
CD [ dir_pathname1 ]
Changes current working directory to the specified directory.
{ DIR | FILES } [ dir_pathname2 ]
Lists the files in the specified directory.
EXIT | E | QUIT | Q
Stops the enoft process.
FC [ hist_num | -hist_offset | text ]
Allows you to edit or repeat a previously executed subcommand line.
hist_num
Specifies the number of a previously entered subcommand line.
The default value is the previously entered subcommand line.
-hist_offset
Specifies a negative offset from the current subcommand line.
The flag entered before the FC subcommand is -1.
text
Is a string of characters.
{ HISTORY | H } [ hist_num ]
Displays previously entered subcommand lines. hist_num specifies the number of
subcommand lines to be displayed. The default value is 10 subcommand lines.
{ LINES | -SL } number
Specifies the number of lines of output to display before pausing so that an area of
output does not scroll out of the terminal or emulator display memory. A single
line of output from enoft can result in multiple lines of output on a screen, so more
lines than are specified by number might be displayed.
Valid values for number are in the range 0 (zero) through 65535. If the LINES
attribute is not specified, the default value for number is zero. A zero value causes
output to continue until all results are displayed.
NOTES
As an alternative syntax, enoft allows subcommands to be entered without the dash (-) that normally begins a command flag. When the dash is omitted, each subcommand after the first must be
separated from the next subcommand in the command line by a semi-colon (;). Because semicolons have significance to the OSS shell, they must be preceded by a backslash character or that
portion of the command line must be enclosed in quotation marks; for example:
enoft file /usr/subdir/hello.out\; set format innerlist\; dumpcode
3−104
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
enoft(1)
or
enoft &quot;file /usr/subdir/hello.out; set format innerlist; dumpcode&quot;
EXAMPLES
1.
To find the names of procedures in a source file named sample.c:
enoft -FILE sample.o -SET SCOPESOURCE sample.c
&quot;-LISTPROC *&quot;
or
enoft -F sample.o -SSS sample.c &quot;-LP *&quot;
2.
To find all the procedures that are called by source file sample.c:
enoft -FILE sample.o -SET SCOPESOURCE sample.c
&quot;-XREFPROC * CALLEDBY&quot;
or
enoft -F sample.o -SSS sample.c &quot;-XP * CALLEDBY&quot;
3.
To look at the optimization levels for source file sample.c:
enoft -FILE sample.o -SET SCOPESOURCE sample.c
&quot;-LISTOPTIMIZE *&quot;
or
enoft -F sample.o -SSS sample.c &quot;-LO *&quot;
4.
To look at the optimization level for a single procedure:
enoft -FILE sample.o -SET SCOPEPROC procedure-name
&quot;-LISTOPTIMIZE *&quot;
or
enoft -F sample.o -SSP procedure-name &quot;-LO *&quot;
or
enoft -FILE sample.o -LISTPROC procedure-name DETAIL
or
enoft -F sample.o -LP procedure-name D
5.
To look at source file numbers for sample.o:
enoft -FILE sample.o &quot;-LISTSOURCE *&quot;
6.
To look at procedure numbers:
enoft -F sample.o &quot;-LP *&quot;
7.
To see the instructions for a procedure:
enoft -FILE sample.o
-DUMPPROC procedure-name IN ICODE
or
enoft -F sample.o -DP procedure-name IN IC
8.
To look at a particular 20 bytes referenced by one of those instructions in hexadecimal:
enoft -FILE sample.o
-DUMPADDRESS 0x00000390 FOR 20 BYTES IN HEX
or
enoft -F sample.o -0x00000390 FOR 20 B IN H
527188-024
Hewlett Packard Enterprise
3−105
enoft(1)
OSS Shell and Utilities Reference Manual
9.
To look at the first 30 bytes in an object file in ASCII:
enoft -FILE sample.o
-DUMPOFFSET 0x0 FOR 30 BYTES IN ASCII
or
enoft -F sample.o -DO 0x0 FOR 30 B IN A
10. To see all the data items external to the object file that need to be linked in and where they
are used in alphabetic order:
enoft -FILE sample.o -SET SORT ALPHA
-LISTUNRESOLVED DATA DETAIL
or
enoft -F sample.o -ST A -LU DATA D
11. To find the data model of the object named sample.o:
enoft -FILE sample.o
-FILEHDR
The data model is supported for systems running H06.24 or later H-series RVUs or J06.13
or later J-series RVUs only.
DIAGNOSTICS
enoft sends all diagnostic messages to standard output. Each diagnostic message has a unique
message number. The following ranges of errors are reported:
Fatal errors
Fatal errors occur when memory cannot be allocated. Such messages are in the
range from 1 to 999 and are prefixed by FATAL ERROR ***. Fatal errors always
cause enoft to terminate with an exit value of 1.
Data errors
Data errors occur when an object file is incomplete or damaged or the specified
command cannot be applied to the object type. Such messages are in the range
from 1000 to 1999 and are prefixed by DATA ERROR ***.
Syntax Errors
Syntax errors occur when enoft cannot recognize a specified command or process
the syntax used correctly. Such messages are in the range from 3000 to 3999 and
are prefixed by SYNTAX ERROR ***.
Warnings
Warnings occur when enoft continues processing based upon its own assumptions
about user intent. Such messages are in the range from 2000 to 2999 and are
prefixed by WARNING ***.
EXIT VALUES
The enoft utility returns:
0
To indicate normal completion, usually in response to an EXIT, E, QUIT, or Q
command.
1
To indicate fatal termination.
RELATED INFORMATION
Commands: eld(1).
3−106
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
enoft(1)
STANDARDS CONFORMANCE
The enoft command is an Hewlett Packard Enterprise extension to the XPG4 Version 2
specification.
527188-024
Hewlett Packard Enterprise
3−107
env(1)
OSS Shell and Utilities Reference Manual
NAME
env - Displays or sets environment variables
SYNOPSIS
env [-i] [-] [name=value ...] [command] [argument ...]
FLAGS
-i
Invokes command with the environment specified by the arguments; the env command
ignores the inherited environment.
-
Invokes command with the environment specified by the arguments; the env command
ignores the inherited environment. (Obsolescent)
DESCRIPTION
The env command lets you get and change your current environment and then run the specified
command with the changed environment. Changes in the form name=value are added to the
current environment before the command is run. If the -i flag is used, the current environment is
ignored, and the command runs with only the changed environment. Changes are only in effect
while the specified command is running.
If command is not specified, the env command displays your current environment one name=value
pair per line.
EXAMPLES
1.
To replace one environment with another one, enter:
env - PATH=$PATH IDIR=/u/jim/include LIBDIR=/u/jim/lib make
This command runs the make command in an environment that consists only of these
definitions for the PATH, IDIR, and LIBDIR parameters. You must redefine PATH so
that the shell can find the make command.
When make is finished, the original environment takes effect again.
EXIT VALUES
The env command exits with the following values:
0 (zero) The env command completed successfully.
1-125
An error occurred in the env command.
126
The specified utility was found but could not be invoked.
127
The specified utility could not be found.
RELATED INFORMATION
Commands: sh(1).
Functions: exec(2).
3−108
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
eval(1)
NAME
eval - Executes arguments as commands
SYNOPSIS
eval [argument ...]
DESCRIPTION
The arguments to eval are read as input to the shell, and the resulting commands are executed.
eval concatenates the arguments and separates each with a space character.
EXAMPLES
In the following example, values are assigned to variables, and these variables are used as arguments to the eval command. The results of the eval command are printed to the screen by using
the print command.
x=5 y=x
z=’$’$x
print $y
x
eval y=’$’$x
print $y
5
NOTES
•
Parameter assignment lists that precede the command remain in effect when the command
completes.
•
I/O redirections are processed after parameter assignments.
•
Errors cause a script that contains the commands so marked to abort.
The eval command is a shell built-in command. It differs from the regular commands in that it
does not open a new shell process when it executes.
A general discussion of shell built-in commands and a list of the OSS shell built-in commands are
in the reference page for sh(1).
RELATED INFORMATION
Commands: exec(1), sh(1).
527188-024
Hewlett Packard Enterprise
3−109
ex(1)
OSS Shell and Utilities Reference Manual
NAME
ex - Edits lines in a file interactively
SYNOPSIS
ex [-c subcommand] [-Rsv] [-wnumber] [+subcommand] [-] [file ...]
ex [-c subcommand] [-Rsv] [-t tag] [file ...]
ex [-c subcommand] -r[file] [-Rsv] [file]
The ex command is a line-oriented text editor that is a subset of the vi screen editor.
FLAGS
-c subcommand
Executes the specified ex subcommand (command) before displaying the file for which
the editor was invoked.
-r[file]
Recovers file after an editor or system crash. If you do not specify file, a list of all saved
files is displayed.
-R
Sets the readonly option, preventing you from altering the file.
-s
Does not display the filename or the : prompt upon entering ex. (Silent mode.)
-ttag
Loads the file that contains tag and positions the editor at tag. To use this flag, you must
first create a database of function names and locations using the ctags command. (OSS
does not support the ctags command. However, it does support ctags files.)
-v
Invokes the visual editor. When the -v flag is specified, an enlarged set of subcommands
are available, including screen editing and cursor movement features. See vi.
-wnumber
Sets the default window size to number lines. This flag is useful only if used with the -v
flag.
-
Suppresses all interactive user feedback. If you use this flag, file input/output errors do
not generate an error message.
+subcommand
Begins the edit with the specified editor subcommand. When subcommand is not
entered, a + (plus sign) sets the current line to the bottom of the file. Normally ex sets
the current line to the last line of the file, or to some specified tag or pattern. (Obsolescent)
DESCRIPTION
The ex editor is similar to ed, but is more powerful, providing multiline displays and access to a
screen editing mode. You may prefer to call vi directly to have environment variables set for
screen editing. Also edit, a limited subset of ex, is available for novices or casual use.
The file argument specifies the file or files to be edited. If you supply more than one file, the ex
editor edits each file in the specified order.
To determine how your tty can perform more efficiently, ex uses the tty capability database terminfo and the type of tty you are using from the TERM environment variable.
The ex editor has the following features:
•
3−110
You can view text in files. The z subcommand lets you access windows of text, and you
can scroll through text by pressing &lt;Ctrl-d&gt; and &lt;Ctrl-u&gt; (visual (-v) mode only).
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
ex(1)
•
The undo subcommand allows you to reverse the last subcommand, even if it is an undo
subcommand. Thus, you can switch back and forth between the latest change in the edit
file and the last prior file status and view the effect of a subcommand without that effect
being permanent. Commands that affect the external environment cannot be undone, however. The ex command displays changed lines and indicates when more than a few lines
are affected by a subcommand. The undo subcommand causes all marks to be lost on
lines changed and then restored if the marked lines were changed. It does not clear the
buffer modified condition.
•
You can retrieve your work (except changes that were in the buffer) if the system or the
editor crashes by reentering the editor with the -r flag and the filename.
•
You can edit a sequence or group of files. You can use the next subcommand to edit each
file on the command line in turn, or to specify a list of filenames to edit (using the shell
pattern matching syntax). The wildcard character % (percent sign) represents the name of
the current edit file and can be used to form filenames.
•
You can copy and move text within a file and between files (see the co, d, ya, and pu subcommands). You use a group of buffers (that have the names of the ASCII letter a to z) to
move text. You can temporarily place text in these buffers and copy or reinsert it in a file,
or you can carry it over to another file. The buffers are cleared when you quit the editor.
The editor does not notify you if text is placed in a buffer and not used before exiting the
editor.
•
You can use patterns that match words. A pattern can be a fixed character string or a regular expression.
A regular expression is a string constructed of special pattern-matching characters. Using
a regular expression to locate text in a file gives you more flexibility than trying to locate a
fixed character string. For more information about regular expressions, see grep.
Editing Modes
Command mode
When you start the ex editor, it is in command mode. Enter ex subcommands at the :
(colon) prompt.
Text entry mode
Entered by a, i, and c. In this state, you can enter text. Entry state ends normally with a
line that has only a . (period) on it or ends abruptly if you press the Interrupt key
sequence.
Visual and open mode
To use visual mode, use the following syntax:
line vi [type] [count]
Enters visual mode at the specified line. The type argument is optional, and can be a (dash) or . (dot), as in the z subcommand, to specify the position of the specified line on
the screen window. (The default is to place the line at the top of the screen window.)
The count argument specifies an initial window size; the default is the value of the window option. The Q subcommand exits visual mode. For more information, see vi.
The o command opens a one-line window. All three commands share the input state of
the vi editor. Press &lt;Esc&gt; to exit text entry mode. To return to the ex command state at
the current line, enter Q while in command mode.
527188-024
Hewlett Packard Enterprise
3−111
ex(1)
OSS Shell and Utilities Reference Manual
The ex Limits
The ex editor has the following maximum limits:
•
2048 bytes per line
•
256 bytes per global command list
•
128 bytes in the previous inserted and deleted text
•
128 bytes in a shell escape command
•
128 bytes in a string-valued option
•
32 bytes in a tag name
•
128 map macros with 2048 bytes total
SUBCOMMANDS
The ex subcommands affect the current line unless you specify otherwise. For information about
how to address lines in a file, see edit and vi. For a complete description of edit options, see Setting Options on the vi reference page.
The ex Subcommands
ab[brev] word abbrev
Adds the specified abbreviation to the current abbreviation list.
[line] a[ppend][!]
Enters input mode and places text after the specified line. To place the text at the beginning of the buffer, specify line 0. The ! (exclamation point) toggles the autoindent editor
option setting for the execution of this subcommand.
ar[gs]
Writes the argument list (the list of arguments on start-up) with the current argument
inside [ and ] (left and right brackets). The argument list can later be replaced by the
arguments of the next subcommand.
[range] c[hange][!] [count]
Enters input mode and replaces the lines in range with the input text. The current line is
the last line input. The ! (exclamation point) toggles the autoindent editor option setting for the execution of this subcommand.
chd[ir][!] [directory]
cd[!] [directory]
Changes the current working directory to directory. If the current buffer has been
modified since the last write, the subcommand issues a warning and fails. You can override this warning by appending a ! (exclamation point) to the subcommand name.
[range] co[py] line [flags]
[range] t line [flags]
Places a copy of the lines in range after the specified line. Line 0 causes the lines to be
placed at the beginning of the buffer.
[range] d[elete] [buffer] [count] [flags]
Deletes the specified lines from the buffer. If you specify a named buffer, the deleted
text is placed there; otherwise, the deleted text is placed in the unnamed buffer. The
current line is the line following the deleted lines, or the last line if the deleted lines
were at the end.
3−112
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
ex(1)
e[dit][!] [+line] [file]
ex[!] [+line] [file]
Edits file. If the current buffer has been modified since the last write, the subcommand
writes a warning and terminates. You can override this action by appending the ! (exclamation point) character to the subcommand (for example, e! file).
If the +line argument is specified, the current line is the specified position, where line
can be a number (or $) or can be specified as /pattern or ?pattern. Preceding the pattern
with a / (slash) starts a search from the beginning of the file. Preceding the pattern with
a ? (question mark) starts a search from the end of the file. This subcommand is affected
by the autowrite and writeany editor options.
f[ile] [file]
Writes the current pathname, the number of lines, and the current position (if no file
argument was specified). If file is specified, ex changes the current filename to file
without changing the contents of the buffer or the previous current file.
[range] g[lobal] /pattern/ [subcommands]
[range] v /pattern/ [subcommands]
Marks the lines within the given range that match (g) or do not match (v) the given pattern. Then executes the ex subcommands with the current line set to each marked line.
You can specify multiple subcommands, one per line, by escaping each newline character with a \ (backslash). If the subcommands argument is not specified, each line is written. For the append, change, and insert subcommands, the input text is included as part
of the global subcommand; in this case, you can omit the terminating period if it ends
subcommands. The visual subcommand can be specified as part of subcommands. In
this mode, input is taken from the terminal. Entering a Q from visual mode selects the
next line matching the pattern and re-enters visual mode, until the list is exhausted.
You cannot use the global subcommand itelf and the undo subcommand in the subcommands argument. The autoprint, autoindent, and report editor options are inhibited for
the duration of the g or v subcommand.
[line] i[nsert][!]
Enters input mode and places the input text before the specified line. The ! (exclamation
point) toggles the autoindent editor option setting for the execution of this subcommand.
[range] j[oin][!] [count] [flags]
Joins the text from the specified lines together into one line. In the POSIX locale, when
the last character on the first line of a pair of lines to be joined is a . (period), two spaces
are added following the period; when the last character of the first line is a space or
when the first character on the second line of the pair is a ) (right parenthesis), no spaces
are added; otherwise, one space is added following the last character of the first line.
Extra spaces at the start of a line are discarded.
Appending a ! (exclamation point) character to the join subcommand causes a simpler
join with no whitespace processing, independent of the current locale.
[range] l[ist] [count] [flags]
Writes the addressed lines; nonprintable characters are written as multicharacter
sequences. The end of the line is marked with a $ (dollar sign).
Long lines are folded. The current line is the last line written.
527188-024
Hewlett Packard Enterprise
3−113
ex(1)
OSS Shell and Utilities Reference Manual
map[!] [x rhs]
Defines macros for use in visual mode. The first argument must be a single character or
the sequence #digit (one of the terminal’s numbered function keys). When this character
or function key is entered in visual mode, the action is as if the corresponding rhs had
been entered. If the ! (exclamation point) character is appended to the subcommand
name map, the mapping is effective during input mode rather than command mode.
This allows x to have two different macro definitions at the same time: one for command
mode and one for input mode. Nonprintable characters, except for the Tab character,
require escaping with &lt;Ctrl-V&gt; (or &lt;Ctrl-Q&gt;) to be entered in the arguments. On certain block mode terminals, the mapping need not occur immediately (for example, it
might occur after the terminal transmits a group of characters to the system), but it
modifies the file as if it occurred immediately.
The map subcommand with no arguments writes all of the macros currently defined. If !
(exclamation point) is appended to the subcommand, only the macros effective during
input mode are written; otherwise, only the macros effective during command mode are
written.
[line] ma[rk] x
[line] k x Gives the specified line the specified mark x, which must be a single lowercase letter of
the POSIX locale. The current line position is not affected. The expression ’x can then
be used as an address in any subcommand requiring one. For example, the following
subcommand deletes all of the lines from the current one to the marked line:
.,’xd
In addition, see the vi ‘‘ and ’’ subcommands for uses of the mark in visual mode. If the
’x subcommand is used in nonvisual mode, the character marked is the first nonspace
character of the current line; otherwise, the character marked is the character at the
current column of the current line.
[range] m[ove] line
Moves the specified lines (range) after the target line (line). The current line is the first
of the moved lines.
n[ext][!] [file ...]
Edits the next file from the argument list. If the current buffer has been modified since
the last write, the subcommand writes a warning and terminates. You can override this
action by appending the ! (exclamation point) character to the subcommand name (n!).
You can replace the argument list by specifying a new one as arguments to this subcommand. Editing then starts with the first file on this new list. The current line is reset as
described for the edit subcommand. This subcommand is affected by the autowrite and
writeany editor options.
[range] nu[mber] [count] [flags]
[range] # [count] [flags]
Writes the selected lines, each preceded with its line number in decimal. Nonprintable
characters, except for &lt;Tab&gt;, are expanded as specified by the print subcommand.
The only meaningful flag is l, which allows additional expanded writing of tabs and
End-of-Line characters by the list subcommand. The current line is the last line written.
3−114
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
ex(1)
[line] o[pen] /pattern/ [flags]
Enters open mode, which is equivalent to visual mode with a one-line window. All
visual mode subcommands are available. If a match is found for the optional regular
expression in line, the cursor is placed at the start of the matching pattern. The visual
mode subcommand Q (see vi) exits open mode.
pre[serve]
Saves the current buffer in a form that can later be recovered by using ex -r or by using
the recover subcommand. After the file has been preserved, a mail message is sent to
the user. This message can be read by invoking mailx. The message contains the name
of the file, the time of preservation, and an ex subcommand for recovering the file.
Additional information can be included in the mail message.
[range] p[rint] [count] [flags]
Writes the addressed lines. Nonprintable characters, except for the Tab character, are
written as multicharacter sequences.
Long lines are folded. The only meaningful flags are # and l. The current line is the last
line written.
[line] pu[t] [buffer]
Puts back deleted or yanked lines after the specified line. A buffer can be specified; otherwise, the text in the unnamed buffer (where deleted or yanked text is placed by
default) is restored. The current line is the first line put back.
q[uit][!] Terminates the editing session. If the current buffer has been modified since the last
write, the subcommand writes a warning and terminates. You can override this warning
and force an exit, discarding changes, by appending the character ! to the subcommand
name.
[line] r[ead][!] [file]
Places a copy of the specified file in the current buffer after the target line (line 0 places
text at the beginning). If no file is named, the current file is the default. If there is no
current file, the specified file becomes the current file. If there is neither current file nor
file argument, the subcommand fails.
The current line is the last line read. In visual mode, the current line is the first line read.
If file is preceded by !, file is taken to be an operating system command and passed to the
program named in the SHELL environment variable. The resulting output is read in to
the buffer. You can override the special meaning of ! by escaping it with a \ (backslash)
character.
rec[over] file
Attempts to recover file if it was saved as the result of a preserve subcommand, the
receipt of a signal, or a system or editor crash. The current line is reset as described for
the read subcommand.
rew[ind][!]
Rewinds the argument list; that is, sets the current file to the first file in the argument list.
This is equivalent to a next subcommand with the current argument list as its argument.
If the current buffer has been modified since the last write, the subcommand writes a
warning and terminates. You can override the action by appending the ! (exclamation
point) character to the subcommand name (rew!). The current line is reset as described
for the read editor subcommand. This subcommand is affected by the autowrite and
writeany editor options.
527188-024
Hewlett Packard Enterprise
3−115
ex(1)
OSS Shell and Utilities Reference Manual
se[t] [option[=[value]] ... [nooption ...] [option? ...] [all]
When no arguments are specified, writes those options whose values have been changed
from the default settings; when the argument all is specified, writes all of the option
values.
Specifying an option name followed by the ? character causes the current value of that
option to be written. The ? can be separated from the option name by zero or more
spaces. The ? is necessary only for Boolean valued options. Boolean options can be
given values by the form se option to turn them on or se nooption to turn them off; string
and numeric options can be assigned by the form se option=value. Spaces in strings can
be included as they are by preceding each such character with a \ (backslash). More
than one option can be set or listed by a single set subcommand by specifying multiple
arguments, each separated from the next by one or more spaces.
sh[ell]
Invokes the program named in the SHELL environment variable with the argument -i
(interactive mode). You can resume editing when the program exits.
so[urce] file
Reads and executes subcommands from the file specified by the mandatory file argument. Such source subcommands can be nested.
[range] s[ubstitute] [/pattern/repl/[options] [count] [flags]
Replaces the first instance of pattern by the string repl on each specified line. If the
/pattern/repl/ argument is not present, the /pattern/repl/ from the previous substitute
subcommand is used.
If options includes the letter g (global), all nonoverlapping instances of the pattern in the
line are substituted. If the option letter c (confirm) is included, then before each substitution the line is written with ˆ characters written on the following line, adjacent to and
identifying the pattern to be replaced; an affirmative response causes the substitution to
be done, while any other input causes it to abort. An affirmative response consists of a
line with the affirmative response (as defined by the current locale) at the beginning of
the line. Such a line is subject to editing in the same way as the command line (the / or :
line at the bottom of the screen).
The current line is the last line substituted. When the c option is used, typing the Interrupt character or receiving the SIGINT signal stops the substitute operation, and ex
returns to command mode. All substitutions completed before the interrupt occurred are
retained and none are made after that point. The current line is the last line substituted.
This subcommand is affected by the LC_MESSAGES environment variable and the
wrapscan option.
su[spend][!]
st[op][!] Allows control to return to the invoking process; ex suspends itself as if it had received
the SIGTSTP signal. The suspension occurs only if job control is enabled in the invoking shell.
Following either suspend or stop with the character ! affects the operation of the
autowrite editor option for this subcommand only.
The current suspend character (see stty) also causes the suspension.
ta[g][!] tagstring
Searches for the tag string, which can be in a different file. If the tag is in a different file,
the new file is opened for editing. If the current buffer has been modified since the last
write, the subcommand writes a warning and terminates. You can override the action by
appending the ! character to the subcommand name. The current line is reset to the line
3−116
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
ex(1)
indicated by the tag. This subcommand is affected by the autowrite, tags, and writeany
editor options.
The tag subcommand searches for tagstring in the tag file referred to by the tags editor
option until a reference to tagstring is found. The file pointed to by this reference is
loaded into the buffer, and the current line is set to the first occurrence of the pattern
specified in the tags file associated with the supplied tagstring. If the tags file contained
a line number reference, the current line is set to that line. If the pattern or line number
is not found, the subcommand writes an error message. If a file referred to by the tags
editor option does not exist or is not readable, the subcommand also writes an error message.
una[bbrev] word
Deletes word from the list of abbreviations, as described by the abbrev subcommand.
u[ndo]
Reverses the changes made by the previous editing subcommand (one that changes the
contents of the buffer). For this purpose, global and visual are considered single subcommands. An undo can itself be reversed. Commands that affect the external environment, such as write, edit, and next cannot be undone.
unm[ap][!] x
If no ! (exclamation point) is specified, removes the command-mode macro definition for
x; otherwise, removes the input-mode macro definition for x. See the map subcommand.
[line] vi[sual] [type] [count] [flags]
Enters visual mode with the current line set to line. The type argument is optional, and
can be a - (minus sign), . (period), + (plus sign), or ˆ (circumflex), as in the z subcommand, to specify the position of the specified line on the screen window. (The default is
to place the line at the top of the screen window.) The count argument specifies the
number of lines that is initially written; the default is the value of the window editor
option. The Q subcommand exits visual mode. (For more information about the Q subcommand, see the vi reference page.)
[range] w[rite][!] [&gt;&gt;] [file]
[range] w[rite] [!] [file]
[range] wq[!] [&gt;&gt;] [file]
Writes the specified lines (the whole buffer, if range is not specified) out to the file
represented by pathname file, writing to standard output the number of lines and bytes
written.
If file is specified and is not the current file, and the file named by file exists, then the
write fails. If the current file has been changed by the file subcommand and that file
exists, the write fails. In either case, you can force the write by appending the ! (exclamation point) character to the subcommand name. You can append to an existing file by
appending &gt;&gt; to the subcommand name.
If the file argument is preceded by a ! (exclamation point) character, the program named
in the SHELL environment variable is invoked with file as its second argument, and the
specified lines are passed as standard input to the subcommand. The ! in this usage must
be separated from the write subcommand by at least one space character. You can override the special meaning of ! by escaping it with a \ (backslash) character. This subcommand is affected by the writeany and readonly editor options.
The subcommand wq is equivalent to a w followed by a q; wq! is equivalent to w! followed by q. If the current buffer has no pathname associated with it, the write subcommand fails.
527188-024
Hewlett Packard Enterprise
3−117
ex(1)
OSS Shell and Utilities Reference Manual
[range] x[it][!] [file]
Performs a write subcommand if any changes have been made to the current buffer since
the last write to any file.
Unless the subcommand fails because an attempt to write lines to a file did not succeed,
the ex program exits after an x subcommand. This subcommand is affected by the writeany and readonly editor options.
[range] ya[nk] [buffer] [count]
Places the specified lines in the named buffer. If no buffer is specified, the unnamed
buffer is used (where the most recently deleted or yanked text is placed by default).
[line] z [type] [count] [flags]
If type is omitted, count lines following the specified line are written. The default for
count is the value of the window editor option. The type argument changes the position
at which line is written on the screen by affecting the number of lines written before and
after line.
If type is specified, it is one of the following:
- (dash) Places line at the bottom of the screen.
+ (plus sign)
Places line at the top of the screen.
. (period) Places line in the middle.
^(circumflex)
Writes out count lines starting count*2 lines before the addressed line; the net
effect of this is that a zˆ subcommand following another z subcommand writes
the previous page.
= (equal sign)
Centers the addressed line on the screen with a line of - (dash) characters written immediately before and after it. The number of preceding and following
lines of text written are reduced to account for these lines of hyphens.
In all cases, the current line is the last line written, with the exception of the = type,
which causes the current line to be that addressed in the subcommand.
! subcommand
[range]! subcommand
Passes the remainder of the line after the ! (exclamation point) character to the program
named in the SHELL environment variable for execution. A warning is issued if the
buffer has been changed since the last write. A single ! character is written when the
subcommand completes. The current line position is not affected.
Within the text of subcommand, % (percent sign) and # (number sign) are expanded as
pathnames (the current and alternative pathnames, respectively), and ! is replaced with
the text of the previous ! subcommand. (Thus, !! repeats the previous ! subcommand.) If
any such expansion is performed, the expanded line is echoed.
You can override the special meanings of %, #, and ! by escaping them with a \
(backslash) character. This subcommand is affected by the autowrite and writeany editor options.
In the second form of the ! subcommand, the remainder of the line after the ! is passed to
the program named in the SHELL environment variable, as described previously. The
specified lines are provided to the program as standard input; the resulting output
3−118
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
ex(1)
replaces the specified lines.
[range] &lt; [count] [flags]
Shifts the specified lines to the left; the number of character positions to be shifted is
determined by the shiftwidth editor option. Only leading spaces are lost in shifting;
other characters are not affected. The current line is the last line changed.
[range] &gt; [count] [flags]
Shifts the specified lines to the right, by inserting spaces, using tabs where possible, as
determined by the shiftwidth editor option. Empty lines are not changed. The current
line is the last line changed.
[range] &amp; [options] [count] [flags]
[range] s[ubstitute] [options] [count] [flags]
[range] [options] [count] [flags]
Repeats the previous substitute subcommand, as if &amp; were replaced by the previous
s/pattern/repl/ subcommand. (The same effect can be obtained by omitting the
/pattern/repl/ string in the substitute subcommand.) The version of the subcommand
using (tilde) is the same as &amp; and s, but the pattern used is the last regular expression
used in any subcommand, not necessarily the one used in the last substitute subcommand. For example, in the following sequence, the (tilde) is equivalent to
s/green/blue/:
s/red/blue/
/green
[line] = [flags]
Writes the line number of the specified line (the default is the last line). The current line
position is not affected.
&lt;Ctrl-d&gt;
Writes the next n lines, where n is the value of the editor option scroll. The subcommand is invoked with the End-of-File character. The current line is the last line written.
@@ buffer
* buffer Executes each line of the named buffer as an ex subcommand. If no buffer is specified,
or is specified as @@ or *, the last buffer executed is used. If there is no last buffer, an
error occurs.
#
Displays addressed lines with line numbers
&quot;
Starts comment
&lt;Return&gt;
Displays next line
The ex Subcommand Addresses
$
The last line
+
The next line
-
The previous line
+n
The nth line forward
527188-024
Hewlett Packard Enterprise
3−119
ex(1)
OSS Shell and Utilities Reference Manual
-n
The nth previous line
%
The first through last lines
number
Line number
.
The current line
x-number
The numberth line before line x
x,y
Lines x through y
&acute;m
The line marked with m
&acute;&acute;
The previous context
/pattern$
The next line with pattern at end of line
/ˆpattern
The next line with pattern at start of line
/pattern
The next line with pattern
?pattern
The previous line with pattern
Scanning Pattern Formation
^
The beginning of the line
$
The end of the line
.
Any character
\&lt;
The beginning of the word
\&gt;
The end of the word
[string]
Any character in string
[ˆstring]
Any character not in string
[x-y]
Any character between x and y, inclusive
*
Any number of the preceding character
The replacement part of the last substitute subcommand.
/(pattern\)
A regular expression pattern can be enclosed in escaped parentheses to identify
them for substitution actions.
FILES
3−120
/bin/exrecover
The recover subcommand.
/bin/expreserve
The preserve subcommand.
.exrc or $HOME/.exrc
Editor start-up file.
/tmp/Exnnnnn
Editor temporary file.
/tmp/Rxnnnnn
Names buffer temporary file.
/var/preserve
Preservation directory.
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
ex(1)
RELATED INFORMATION
Commands: ed(1), grep(1), vi(1).
Files: terminfo(4).
The TERM environment variable.
527188-024
Hewlett Packard Enterprise
3−121
exec(1)
OSS Shell and Utilities Reference Manual
NAME
exec - Executes arguments as commands
SYNOPSIS
exec [argument ...]
DESCRIPTION
If argument is specified and is a valid command name, it is executed in place of the shell without
creating a new process. Input/output arguments can affect the current process. If no arguments
are given, the effect of exec is to modify file descriptors as prescribed by the input/output redirection list. Any file descriptor numbers greater than 2 that are opened with this mechanism are
closed when invoking another program.
EXAMPLES
1.
The following command executes the program my_program:
exec my_program
EXIT VALUES
If a command is specified, exec does not return to the shell; instead, the exit status of the process is
the exit status of the program implementing the command that overlaid the shell.
If the command specified by the arguments is not found, the exit status is 127.
If the command is found, but it is not an executable utility, the exit status is 126.
If a redirection error occurs, the shell exits with a value in the range 1-125; otherwise, exec returns
an exit status of 0 (zero).
NOTES
•
Parameter assignment lists that precede the command remain in effect when the command
completes.
•
I/O redirections are processed after parameter assignments.
•
Errors cause a script that contains the commands so marked to abort.
The exec command is a shell built-in command. It differs from the regular commands in that it
does not open a new shell process when it executes.
A general discussion of shell built-in commands and a list of the OSS shell built-in commands are
in the reference page for sh(1).
RELATED INFORMATION
Commands: eval(1), sh(1).
3−122
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
exit(1)
NAME
exit - Causes the shell to exit
SYNOPSIS
exit [n]
DESCRIPTION
The exit command causes the shell to exit with the exit status specified by n. If n is omitted, the
exit status is that of the last command executed. An End-of-File also causes the shell to exit,
unless the shell has the ignoreeof option (see set) turned on.
EXAMPLES
1.
The following command exits the OSS shell with a value of true.
exit 0
EXIT VALUES
If n is not specified, the exit status will be the exit value of the last command executed, or 0 (zero)
if no command was executed.
NOTES
•
Parameter assignment lists that precede the command remain in effect when the command
completes.
•
I/O redirections are processed after parameter assignments.
•
Errors cause a script that contains the commands so marked to abort.
The exit command is a shell built-in command. It differs from the regular commands in that it does
not open a new shell process when it executes.
A general discussion of shell built-in commands and a list of the OSS shell built-in commands are
in the reference page for sh(1).
RELATED INFORMATION
Commands: set(1), sh(1).
527188-024
Hewlett Packard Enterprise
3−123
expand(1)
OSS Shell and Utilities Reference Manual
NAME
expand - Replace tab or space characters
SYNOPSIS
Current syntax
expand [-t tablist] [file ...]
Obsolescent syntax
expand [-tabstop | -tab1,tab2,...,tabn] [file ...]
The expand command changes tab characters to spaces in the named files or in the standard input
file, and writes the result to the standard output file.
FLAGS
-t tablist Specifies the tab stops. The tablist argument consists of a single positive decimal
integer or multiple positive decimal integers, separated by spaces or commas, in ascending order. If a single number is specified, tabs are set tablist column positions apart
instead of the default width (8). If multiple numbers are specified, tabs are set at those
specific column positions. Tabbing to tab stop position n thus causes the next character
output to be in the (n+1)th column position on that line.
If the expand command has to process a tab character at a position beyond the last of
those specified in a multiple tab stop list, the tab character is replaced by a single space
in the output.
-tabstop Sets tab stops tabstop spaces apart instead of the default distance (8). (Obsolescent.)
-tab1, tab2, ..., tabn
Sets tab stops at specified columns. Columns are measured in bytes. (Obsolescent.)
DESCRIPTION
Backspace characters are preserved in the output and decrement the column count for tab calculations. The column position count cannot be decremented below zero. The expand command is
useful for preprocessing character files (before sorting, looking at specific columns, and so on) that
contain tab characters.
EXAMPLES
1.
To replace tab characters in file with spaces, enter:
expand file
RELATED INFORMATION
Commands: unexpand(1).
3−124
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
export(1)
NAME
export - Allows values of variables to be used by other commands
SYNOPSIS
export [name[=value ...]]
export -p
FLAGS
-p
Writes the names and values of all exported variables.
DESCRIPTION
The export command marks the name and value, specified as the name and value arguments, for
automatic export to the shell environment.
If -p is specified, export writes the names and values of all exported variables to standard output.
The command export -p allows portable access to the value that can be saved and then later
restored by using, for example, a . (dot) script. The shell formats the output, including proper use
of quoting, so that it is suitable for reinput to the shell, as commands that achieve the same exporting results.
EXAMPLES
1.
The following example defines a umask value of 066 and exports this value to the shell
where it will be used for all new files and directories created during the shell process.
export umask=066
2.
The following command lists all exported variables and their values in effect for the
current shell process.
export -p
NOTES
•
Parameter assignment lists that precede the command remain in effect when the command
completes.
•
I/O redirections are processed after parameter assignments.
•
Errors cause a script that contains the commands so marked to abort.
•
Words, following a command specified as command, that are in the format of a parameter
assignment are expanded with the same rules as a parameter assignment. This means that
(tilde) substitution is performed after the = (equal sign). Word splitting and filename
generation are not performed.
The export command is a shell built-in command. It differs from the regular commands in that it
does not open a new shell process when it executes.
A general discussion of shell built-in commands and a list of the OSS shell built-in commands are
in the reference page for sh(1).
RELATED INFORMATION
Commands: sh(1).
527188-024
Hewlett Packard Enterprise
3−125
expr(1)
OSS Shell and Utilities Reference Manual
NAME
expr - Evaluates arguments as expressions
SYNOPSIS
expr expression
DESCRIPTION
The expr command reads an expression, evaluates it, and writes the result to the standard output
file. Within the expression argument, you must separate each term with spaces, precede characters
special to the shell with a \ (backslash), and quote strings containing spaces or other special characters. Note that expr returns 0 (zero) to indicate a zero value, rather than the null string. Integers
can be preceded by a unary minus sign. Internally, integers are treated as 32-bit, two’s complement numbers.
The operators and keywords are described in the following listing. Characters that need to be
escaped are preceded by a \ (backslash). The list is in order of increasing precedence, with equal
precedence operators grouped within {} (braces).
expression1 \| expression2
Returns expression1 if it is neither null nor 0 (zero); otherwise, returns expression2.
expression1 \ &amp; expression2
Returns expression1 if neither expression1 nor expression2 is null nor 0 (zero); otherwise, returns 0 (zero).
expression1 { =, \&gt;, \&gt;=, \&lt;, \&lt;=, != } expression2
Returns the result of an integer comparison if both expressions are integers; otherwise,
returns the result of a string comparison.
expression1 {+, - } expression2
Adds or subtracts integer-valued arguments.
expression1 { \*, /, % } expression2
Multiplies, divides, or provides the remainder from the division of integer-valued arguments.
expression1 : expression2
Compares expression1 with expression2, which must be a regular expression, with syntax as described for the grep command, except that all patterns are anchored to the
beginning of the string, so ˆ (circumflex) (which anchors a pattern to the beginning of a
line) is not a special character in this context.
Normally, the matching operator returns the number of characters matched. Alternatively, you can use the \(...\) symbols in expression2 to return a portion of expression1.
(expression)
Provides expression grouping.
To avoid unpredictable results when using a range expression to match a class of characters, use a
character class expression rather than a standard range expression. For information about character class expressions, see the discussion of this topic in the grep command reference page.
Each part of an expression is composed of separate arguments, so use of spaces is required. For
example, enter the following command line instead of expr 1+2:
expr 1 + 2
3−126
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
expr(1)
EXAMPLES
1.
To increment a shell variable, enter:
COUNT=‘expr $COUNT + 1‘
This command adds 1 to the COUNT shell variable (see the sh command reference page
for details).
2.
To find the length of a shell variable, enter:
RES=‘expr &quot;$VAR&quot; : &quot;.*&quot;‘
Note that the VAR variable is placed within double quotation marks to avoid problems
where VAR is NULL or contains embedded spaces. The regular expression is also quoted
to avoid expansion by the shell.
3.
To use part of a shell variable, enter:
RES=‘expr &quot;$VAR&quot; : &quot;-*\(.*\)&quot;‘
This removes leading - (dashes), if any, from the VAR variable. If the \( \) characters are
omitted, the RES variable would contain the length of VAR.
4.
Special considerations:
RES=‘expr &quot;x$VAR&quot; : &quot;x-*\(.*\)&quot;‘
This command succeeds even if the VAR variable has the value - (dash).
RES=‘expr &quot;x$VAR&quot; = &quot;x=&quot;
This succeeds even if the VAR variable has the value = (equal sign).
EXIT VALUES
The expr command returns the following exit values:
0
The expression is neither null nor 0 (zero).
1
The expression is null or 0 (zero).
2
The expression is invalid.
&gt;2
An error occurred.
RELATED INFORMATION
Commands: grep(1), sh(1), test(1).
527188-024
Hewlett Packard Enterprise
3−127
false(1)
OSS Shell and Utilities Reference Manual
NAME
false - Returns a standard exit value
SYNOPSIS
false
DESCRIPTION
The false command returns a nonzero exit value. This command is usually used in input to the sh
command.
EXAMPLES
This procedure displays the date and time once a minute. To stop it, press the Interrupt key
sequence.
EXIT VALUES
The nonzero value returned by false may vary from system to system.
RELATED INFORMATION
Commands: sh(1), true(1).
3−128
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
fc(1)
NAME
fc - Lists, edits, or reexecutes commands
SYNOPSIS
fc [-r] [-e editor] [first [last]]
fc -l[-nr] [first [last]]
fc -s[old=new] [first]
fc -e -[old=new] [first] (Obsolescent)
FLAGS
-e editor Uses the specified editor to edit the commands. The value in the FCEDIT variable is
used as a default when -e is not specified. If FCEDIT is null or unset, ed is used as the
editor.
-l
Lists the commands rather than invokes an editor on them. The commands are written in
the sequence indicated by the first and last arguments, as affected by -r, with each command preceded by the command number.
-n
Suppresses command numbers when listing with -l.
-r
Reverses the order of the commands listed with -l or editor (with neither
-l or -s). An obsolescent version of -r is fc -e -.
-s
Reexecutes the command without invoking an editor.
DESCRIPTION
The fc command lists or edits and reexecutes commands previously entered to an interactive shell.
The parameters first and last specify a range of commands to be listed or edited, where first and
last are the names of previously executed commands or the numbers of commands in the list produced by the history command. A negative number is used as an offset to the current command
number.
If last is not specified, then it will be set to first. If first is not specified, the previous command is
the default for editing. The old=new argument replaces the first occurrence of a command name
old in the commands to be reexecuted by the string new.
The number of previous commands that can be accessed is determined by the value of the HISTSIZE variable.
EXAMPLES
1.
The following command reexecutes the command whose number in the history log
corresponds to the number given for the argument.
fc -s argument
2.
The following command opens the vi editor on the command in the history log that
corresponds to the number given for the argument.
fc -e vi argument
NOTES
The fc command is a shell built-in command. It differs from the regular commands in that it does
not open a new shell process when it executes.
A general discussion of shell built-in commands and a list of the OSS shell built-in commands are
in the reference page for sh(1).
RELATED INFORMATION
527188-024
Hewlett Packard Enterprise
3−129
fc(1)
OSS Shell and Utilities Reference Manual
Commands: history(1), sh(1).
3−130
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
fg(1)
NAME
fg - Brings processes to the foreground
SYNOPSIS
fg [job]
DESCRIPTION
The fg command brings each process specified as job to the foreground. See the reference page
for the jobs command for information on the format of job.
EXAMPLES
1.
The following command restarts, as a foreground process, the stopped background
process whose job number is 149.
fg %149
NOTES
The fg command is a shell built-in command. It differs from the regular commands in that it does
not open a new shell process when it executes.
A general discussion of shell built-in commands and a list of the OSS shell built-in commands are
in the reference page for sh(1).
RELATED INFORMATION
Commands: jobs(1), sh(1).
527188-024
Hewlett Packard Enterprise
3−131
fgrep(1)
OSS Shell and Utilities Reference Manual
NAME
fgrep - Searches a file for a fixed-string pattern
SYNOPSIS
fgrep
[-c | -l]
[-bhinqsvx]
{ pattern ... | -e pattern ... | -f pattern_file ... }
[file ... ]
FLAGS
While most flags can be combined, some combinations result in one flag overriding another. For
example, if you specify both the -n and -l flags, the output includes only filenames (as specified by
the -l flag) and thus does not include line numbers (as specified by the -n flag).
-b
Precedes each line by the block number of the block in which it was found. Use this flag
to help find disk block numbers by context.
-c
Displays only a count of matching lines.
-e pattern ...
Specifies a pattern. This flag works the same as a simple pattern but is useful when the
pattern begins with a - (dash).
-f pattern_file ...
Specifies a file that contains patterns. Each pattern terminates with a newwline character.
-h
Suppresses reporting of filenames when multiple files are processed.
-i
Ignores the case of letters in locating pattern; that is, uppercase and lowercase letters in
the input are considered to be identical.
-l
Lists the name of each file that has lines matching pattern. Each filename is listed only
once; filenames are separated by newline characters.
-n
Precedes each line with its relative line number in the file.
-q
Suppresses all output except error messages. This flag is useful for easily determining
whether a pattern or string exists in a group of files. When searching several files, it provides a performance improvement, because it can quit as soon as it finds the first match,
and it requires less care by the user in choosing the set of files to supply as arguments,
because it exits with a 0 (zero) exit status if it detects a match, even if the fgrep command detected an access or read error on earlier file arguments.
-s
Suppresses error messages about inaccessible files.
-v
Displays all lines except those that match the specified pattern. This flag is useful for
filtering unwanted lines out of a file.
-x
Displays lines that match the pattern exactly with no additional characters.
DESCRIPTION
The fgrep command searches the specified files (the standard input file by default) for lines containing characters that match the specified pattern and then writes the matching lines to the standard output file.
The fgrep command is an obsolescent version of the command grep -F, which searches for patterns that are fixed strings.
3−132
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
fgrep(1)
Command Usage
The fgrep command precedes the matched line with the name of the file containing it if you
specify more than one file (except when the -h flag is specified).
Lines are limited to 2048 bytes; longer lines are broken into multiple lines of 2048 or fewer bytes.
Running the fgrep command on a nontext file (for example, an .o file) produces unpredictable
results and is discouraged.
Regular Expressions (REs)
Regular expressions (REs) cannot contain newline characters, because these signal a new pattern.
The following REs match a single character:
character
An ordinary character (one other than one of the special pattern-matching characters)
matches itself.
.
A . (dot) matches any single character except the newline character.
[string] A string enclosed in [ ] (brackets) matches any one character in that string. In addition,
certain pattern-matching characters have special meanings within brackets:
^
If the first character of string is a ˆ (circumflex), the RE [ˆstring] matches any
character except the characters in string and the newline character. A ˆ has
this special meaning only if it occurs first in the string.
-
You can use a - (dash) to indicate a range of consecutive characters. The characters that fall within a range are determined by the current collating
sequence, which is defined by the LC_COLLATE environment variable. For
example, [a-d] is equivalent to [abcd] in the traditional ASCII collating
sequence.
A range can include a multicharacter collating element enclosed within
bracket-period delimiters ([. .]). The bracket-period delimiters in the RE syntax distinguish multicharacter collating elements from a list of the individual
characters that make up the element.
A collating sequence can define equivalence classes for characters. An
equivalence class is a set of collating elements that all sort to the same primary
location. They are enclosed within bracket-equal delimiters ([= =]). An
equivalence class generally is designed to deal with primary-secondary sorting. For example, if e, &egrave;, and &ecirc; belong to the same equivalence class, then
[[=e=]fg], [[=&egrave;=]fg], and [[=&ecirc;=]fg] are each equivalent to [e&egrave;&ecirc;fg].
The - (dash) character loses its special meaning if it occurs first ([-string]), if it
immediately follows an initial circumflex ([ˆ-string]), or if it appears last
([string-]) in the string.
]
527188-024
When the ] (right bracket) is the first character in the string ([]string]) or when
it immediately follows an initial circumflex ([ˆ]string]), it is treated as a part of
the string rather than as the string terminator.
Hewlett Packard Enterprise
3−133
fgrep(1)
OSS Shell and Utilities Reference Manual
\special_character
A \ (backslash) followed by a special pattern-matching character matches the special
character itself (as a literal character). These special pattern-matching characters are as
follows:
[: :]
.*[\
Always special, except when they appear within [ ] (brackets).
^
Special at the beginning of an entire pattern or when it immediately follows
the left bracket of a pair of brackets ([ˆ...]).
$
Special at the end of an entire pattern.
A character class name enclosed in bracket-colon delimiters matches any of the set of
characters in the named class. Members of each of the sets are determined by the current
setting of the LC_CTYPE environment variable. The supported classes are alpha,
upper, lower, digit, xdigit, space, print, punct, graph, and cntrl. Here is an example
of how to specify one of these classes:
[[:lower:]]
This matches any lowercase character for the current locale.
Forming Patterns
The following rules describe how to form patterns from REs:
•
An RE that consists of a single, ordinary character matches that same character in a string.
•
An RE followed by an * (asterisk) matches zero or more occurrences of the character that
the RE matches. For example, the following pattern:
ab*cd
matches each of the following strings:
acd
abcd
abbcd
abbbcd
but not the following string:
abd
If there is any choice, the leftmost longest matching string is chosen. For example, given
the following string:
122333444
the pattern .* matches 122333444, the pattern .*3 matches 122333, and the pattern .*2
matches 122.
3−134
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
•
fgrep(1)
An RE followed by:
\{number\}
Matches exactly number occurrences of the character matched by the RE.
\{number,\}
Matches at least number occurrences of the character matched by the RE.
\{number1,number2\}
Matches any number of occurrences of the character matched by the RE from
number1 to number2, inclusive.
The values of number1 and number2 must be integers in the range 0 through
255. Whenever a choice exists, this pattern matches as many occurrences as
possible.
Note that if number is 0 (zero), pattern matches zero occurrences of pattern. For
example:
$ echo abc | grep ’aX\{0\}bX\{0\}cX\{0\}’
abc
$
•
You can combine REs into patterns that match strings containing the same sequence of
characters. For example, AB*CD matches the string ABCD, and [A-Za-z]*[0-9]*
matches any string that contains any combination of ASCII alphabetic characters (including none), followed by any combination of numerals (including none).
•
The character sequence \(pattern\) matches pattern and saves it into a numbered holding
space. Using this sequence, up to nine patterns can be saved on a line. Counting from left
to right on the line, the first pattern saved is placed in the first holding space, the second
pattern saved is placed in the second holding space, and so on.
The character sequence \n matches the nth saved pattern, which is placed in the nth holding space. (The value of n is an integer in the range 1 through 9.) Thus, the following pattern:
\(A\)\(B\)C\2\1
matches the string ABCBA. You can nest patterns to be saved in holding spaces.
Whether the enclosed patterns are nested or in a series, \n refers to the nth occurrence,
counting from the left, of the delimiting characters, \).
Restricting What Patterns Match
A pattern can be restricted to match either from the beginning of a line, up to the end of the line, or
the entire line:
•
A ˆ (circumflex) at the beginning of a pattern causes the pattern to match only a string that
begins in the first character position on a line.
•
A $ (dollar sign) at the end of a pattern causes that pattern to match only if the last
matched character is the last character (not including the newline character) on a line.
•
The construction ˆpattern$ restricts the pattern to matching only an entire line.
527188-024
Hewlett Packard Enterprise
3−135
fgrep(1)
OSS Shell and Utilities Reference Manual
EXAMPLES
1.
To search several files for a string of characters, enter:
fgrep ’strcpy’ *.c
This searches for the string strcpy in all files in the current directory with names ending in
.c.
2.
To count the number of lines that match a pattern, enter:
fgrep -c ’{’ pgm.c
fgrep -c ’}’ pgm.c
This displays the number of lines in pgm.c that contain left and right braces.
If you do not put more than one { or } on a line in your C programs, and if the braces are
properly balanced, then the two numbers displayed will be the same.
3.
To display all lines in a file that begin with an ASCII letter, enter:
fgrep -e ’ˆ[a-zA-Z]’ pgm.s
Note that because the fgrep command searches only for fixed strings and does not interpret pattern-matching characters, the following command searches only for the literal
string ˆ[a-zA-Z] in file pgm.s:
fgrep ’ˆ[a-zA-Z]’ pgm.s
4.
To display all lines that do not match a pattern, enter:
fgrep -v ’ˆ#’
This displays all lines that do not begin with a # (number sign).
5.
To display the names of files that contain a pattern, enter:
fgrep -l ’rose’ *.list
This searches the files in the current directory whose names end with .list and displays the
names of those files that contain at least one line containing the string rose.
6.
To display all lines that contain uppercase characters, enter:
fgrep ’[[:upper:]]’ pgm.s
EXIT VALUES
The fgrep command returns the following exit values:
0 (zero) A match was found.
1
No match was found.
2
A syntax error occurred or a file was inaccessible, even if matches were found.
RELATED INFORMATION
Commands: ed(1), egrep(1), grep(1), sed(1), sh(1).
Files: locale(4).
3−136
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
fgrep(1)
STANDARDS CONFORMANCE
This command conforms to the XPG4 Version 2 specification.
The following features are Hewlett Packard Enterprise extensions to the XPG4 Version 2
specification:
•
527188-024
The -b, -h, -q, and -s flags are supported.
Hewlett Packard Enterprise
3−137
file(1)
OSS Shell and Utilities Reference Manual
NAME
file - Determines file type from file content
SYNOPSIS
file file ...
DESCRIPTION
The file command reads files, performs a series of tests on each one, and attempts to classify them
by type. file then writes the file types to standard output.
The file utility uses the following steps to determine the type of a file:
•
Uses the stat( ) function to determine if the file operand is a regular file or a special file
such as a directory, a named pipe (FIFO), or a file in the Guardian file system.
•
Checks regular files to determine if they are Hewlett Packard Enterprise-generated object
files.
•
Examines the first 512 bytes of object files other than Hewlett Packard Enterprise object
files to determine the file type; uses the /etc/magic file to check for magic values.
•
Invokes a Guardian procedure call for Guardian text files to retrieve the Guardian specific
file attributes, file type, and file code.
If a file appears to be plain text, file examines the first 512 bytes and tries to determine what kind
of text it is. If the first 512 bytes only contain ASCII characters, file returns either ASCII text or
English text. If the file contains other characters (that is, European or Asian xtended characters), file returns data. If a file does not appear to be plain text, file attempts to distinguish a
binary data file from a text file that contains extended characters.
/etc/magic File
The file command uses the /etc/magic file to identify files that have a magic number (that is, contain a string constant that indicates type).
The following magic values are supported:
Table 3−1. Supported Magic Values
__________________________________________________________
Byte Offset
Value Type
Magic Value Printed String
__________________________________________________________
0
short
070707
cpio archive
0
string
070707
ASCII cpio archive
0
string
%!
PostScript document
0
string
&lt;MakerFile FrameMaker document
0
string
&lt;MIFFile
FrameMaker MIF file
0
string
&lt;MML
FrameMaker MML file
0
string
!&lt;arch&gt;
archive
257
string
ustar
tar archive
40
string
SunBin
Sun binary
__________________________________________________________
You can add other magic values to the /etc/magic file.
Use on Guardian Objects
Specify Guardian files with the /G pathname convention.
The file command uses the stat( ) function to determine the file type. Guardian processes with subtype 30 are identified as character special files. Guardian pathnames consisting of only /G,
volume names, or subvolume names are identified as directory. Guardian nondisk devices and
processes that are not of subtype 30 are identified as block special.
3−138
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
file(1)
For disk files, the file utility checks the file format and returns its type. The file utility can only
detect object files created by Hewlett Packard Enterprise compilers and tools. Object files generated by other sources are flagged as unknown format.
For text files, the file utility examines the file data and tries to determine what kind of text it contains. The string empty is printed for any file type that has no data.
Standard Output
The type value for each file operand is printed to standard output in the following format:
&quot;%s: %s\n&quot;, file, type[,type]...
where type contains one of the following strings:
____________________________________________________________
File Type
Strings
____________________________________________________________
OSS and Guardian
block special, character special,
files that are not
directory, fifo, strings
disk
files
____________________________________________________________
Empty regular
empty
OSS files
____________________________________________________________
Regular Hewlett
Archive member, axcel region, binder
Packard Enterregion, ELF object format, executable,
prise object files
Guardian Archive, Guardian COFF
object format, Guardian target,
library, NonStop OSS target, TNS/X PIC
object file, TNS/E PIC object file,
TNS/R object file, TNS/R PIC object
file, OSS archive, process snapshot,
shared runtime library, symbol region,
TNS object format, uses shared runtime
library
____________________________________________________________
Regular text files
ASCII text, assembler program text,
commands text, C program text, data or
International Language text, English
text, FORTRAN program text, English
text, EQN, input text, [nr/tr]off, SCCS,
TBL
____________________________________________________________
Files in the Guarentry-sequenced, file codes, keydian file system
sequenced, relative, SQL object,
unstructured
____________________________________________________________
Files with magic
archive, CPIO archive, FrameMaker docuvalues, cpio or tar
ment, FrameMaker MIF file, FrameMaker
format files
MML file, PostScript document, Sun
Binary, TAR archive
____________________________________________________________
All other files
unknown format
____________________________________________________________
EXAMPLES
1.
To show the file type of a Guardian text file, enter:
file /G/vol/subvol/file
This command displays the pathname of the file followed by the file type.
527188-024
Hewlett Packard Enterprise
3−139
file(1)
OSS Shell and Utilities Reference Manual
FILES
/etc/magic
File type database.
RELATED INFORMATION
Commands: ls(1).
Files: locale(4).
STANDARDS CONFORMANCE
This command has extensions to the XPG4 Version 2 specification in order to support files in the
Guardian environment.
3−140
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
find(1)
NAME
find - Finds files matching an expression
SYNOPSIS
find pathname ... [ -W NOG ] [ -W NOE ] [ expression ...]
FLAGS
Hewlett Packard Enterprise extensions
-W NOG
Specifies that the /G directory should be omitted when the initial directory is root.
This flag is ignored when the initial directory is not /, /E, or /E/system.
-W NOE
Specifies that the /E directory should be omitted when the initial directory is root.
This flag is ignored when the initial directory is not root.
Specify both the -W NOG and -W NOE flags to omit both the /G and /E directories.
DESCRIPTION
The find command recursively searches the directory tree for each specified pathname, seeking
files that match a Boolean expression written using terms given later. The output from find
depends on the terms used in expression.
Expressions
In the following descriptions, the argument number is a decimal integer that can be specified as
+number (more than number), -number (less than number), or number (exactly number).
The first argument that starts with a - (dash) or is a ! (exclamation point) or a ( (left parenthesis)
and all subsequent arguments are interpreted as an expression.
-acl [ aclpatt | =aclpatt | opt ]
TRUE if the access control list (ACL) of the file matches the ACL pattern aclpatt or
contains optional ACL entries. See &quot;Access Control Lists (ACLs).&quot;
-name pattern
TRUE if pattern matches the basename of a filename. You can use pattern-matching
characters, provided they are quoted.
-perm [-]mode
TRUE if the file permission code of the file exactly matches mode (see the reference
page for the chmod command). If the optional - (dash) is present, this expression evaluates to TRUE if at least these permissions are set. If the - is omitted, the expression
evaluates to TRUE when the file permission bits exactly match the value of the resulting
template.
The mode argument can be up to three octal digits. This argument is used to represent
file mode bits. It is identical in format to the symbolic mode argument described for the
chmod command and is interpreted as follows:
527188-024
•
To start, a template is assumed with all file mode bits cleared.
•
The symbol + (plus sign) sets the appropriate mode bits in the template, whereas
a symbol of - (minus sign) clears the appropriate bits. A - (minus sign) cannot
be the first character of mode because it could create ambiguity with the optional
leading - (dash). Because the initial mode is all bits off, there are no symbolic
modes that need to use - (minus sign) as the first character.
Hewlett Packard Enterprise
3−141
find(1)
OSS Shell and Utilities Reference Manual
•
The symbol = (equal sign) sets the appropriate mode bits without regard to the
contents of the process’s file mode creation mask.
-perm [-]octal_number
If the - (dash) is omitted, TRUE when the file permission bits exactly match the value of
the octal number octal_number and only the bits corresponding to the octal mask 07777
are compared. (For more information, see the description of the octal mode on the
chmod command’s reference page.) If octal_number is preceded by a - (dash), the
expression evaluates as TRUE if at least all of the bits specified in octal_number that
are also set in the octal mask 07777 are set.
-priv { PRIVSETID | PRIVSOARFOPEN | ANY* }
(J06.11 or later J-series RVUs or H06.22 or later H-series RVUs only)
TRUE when the file has the specified privilege. For example, the flag:
-priv PRIVSETID
is TRUE for files that have the PRIVSETID privilege.
-priv ANY
is TRUE for files that have either file privilege PRIVSETID or PRIVSOARFOPEN.
* ANY is available on J06.15 or later J-series RVUs or H06.26 or later H-series RVUs
only.
-prune
Always TRUE. This expression prunes the search tree at the file. That is, if the current
pathname is a directory, the find command does not descend into that directory. If the depth expression is specified, the -prune expression has no effect.
-type type
TRUE if the file type is of the specified type as follows:
c
Character special file
d
Directory
f
Plain file
l
Symbolic link
p
FIFO (a named pipe)
s
Socket file (H-series and J-series RVUs only)
-links number
TRUE if the file has number links. The argument number is a decimal integer that can
be specified as +number (more than number), -number (less than number), or number
(exactly number). See the reference page for the ln command.
-user user
TRUE if the file belongs to user.
-nouser TRUE if the file belongs to a user ID for which the getpwuid() function returns null.
-group group
TRUE if the file belongs to group.
-nogroup
TRUE if the file belongs to a group ID for which the getgrgid() function returns null.
3−142
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
find(1)
-size number[c | k]
TRUE if the file is number blocks long (512 bytes per block). For this comparison, the
file size is rounded up to the nearest block. If the c argument is present, the expression
evaluates to TRUE if the file is number bytes long. If the k argument is present, the
expression evaluates to TRUE if the file is number kilobytes long. For this comparison,
the file size is rounded up to the nearest kilobyte.
The argument number is a decimal integer that can be specified as +number (more than
number), -number (less than number), or number (exactly number).
-atime number
TRUE if the file was accessed in the past number days. The argument number is a
decimal integer that can be specified as +number (more than number), -number (less
than number), or number (exactly number). For example -atime 3 is TRUE if the file
was accessed any time in the period from 72 to 48 hours ago.
-mtime number
TRUE if the file was modified in the past number days. The argument number is a
decimal integer that can be specified as +number (more than number), -number (less
than number), or number (exactly number).
-ctime number
TRUE if the file inode was changed in the past number days. The argument number is a
decimal integer that can be specified as +number (more than number), -number (less
than number), or number (exactly number).
-exec command
TRUE if the command runs and returns a 0 (zero) value as exit status. The end of command must be punctuated by a quoted or escaped ; (semicolon). The command parameter { } is replaced by the current pathname. If shell quoting is used in command, each
word in the command must be quoted separately. Also, the characters ; (semicolon) and
{ } (braces) must appear as separate words on a command line.
The current directory for the invocation of command is the same as the current directory
when the find command was started.
-ok command
Equivalent to the -exec expression, except that the find command first asks you whether
it should start command. If your response begins with y, or the locale’s equivalent of a
y, command is started. If the response is negative, command is not invoked and the
expression evaluates as FALSE. The end of command must be punctuated by a quoted
or escaped semicolon. If shell quoting is used in command, each word in the command
must be quoted separately. Also, the characters ; (semicolon) and { } (braces) must
appear as separate words on a command line.
-print
Always TRUE; causes the current pathname to be displayed. The find command
assumes a -print expression, unless the -exec, ls, or -ok expressions are present.
-newer file
TRUE if the current file was modified more recently than the file indicated by file.
-depth
Always TRUE. This expression causes the descent of the directory hierarchy to be done
so that all entries in a directory are affected before the directory itself. This expression
can be useful when find is used with the pax utility to transfer files contained in directories without write permission.
If the -depth expression is not specified, all entries in a directory are affected after the
directory itself. If -depth is specified, it applies to the entire expression, even if the -
527188-024
Hewlett Packard Enterprise
3−143
find(1)
OSS Shell and Utilities Reference Manual
depth primary would not normally be evaluated.
\( expression \)
TRUE if expression is TRUE.
-ls
Always TRUE; causes the pathname argument to be printed together with its associated
statistics. These include, respectively, inode number, size in kilobytes (1024 bytes), protection mode, number of hard links, user, group, size in bytes, and modification time. If
the file is a special file, the size field contains the major and minor device numbers. If the
file is a symbolic link, the pathname of the linked-to file is printed, preceded by -&gt;. The
format of the -ls flag is identical to that of ls -gilds (note that formatting is done internally, without executing ls.)
-xdev
Always TRUE; causes the find command to not traverse down into a file system
different from the one on which the current pathname resides. If any -xdev expression is
specified, it applies to the entire expression even if the -xdev expression would not normally be evaluated.
The primaries can be combined using the following operators (in descending order of
precedence):
( expression )
TRUE if expression is TRUE.
! expression
The negation of a primary (! is the unary not operator).
expression [-a] expression
Concatenation of primaries (the and operation is implied by the juxtaposition of two primaries or can be explicitly stated as -a). The second expression is not evaluated if the first
expression is FALSE.
expression -o expression
Alternation of primaries (-o is the or operator). The second expression is not evaluated if
the first expression is TRUE.
If no expression is present, -print is used as the expression; otherwise, if the given expression
does not contain any of the expressions -exec, -ok, or -print, the given expression is effectively
replaced by the following:
( expression ) -print
The -user, -group, and -newer expressions each evaluate their respective arguments only once.
To avoid unpredictable results when using a range expression to match a class of characters, use a
character class expression rather than a standard range expression. For information about character class expressions, see the reference page for the grep command.
Access Control Lists (ACLs)
The -acl expression enables the user to search for access control list (ACL) entries. The expression
TRUE if the file’s access control list matches an access control list pattern or contains optional
ACL entries (see the acl(5) reference page). The -acl expression has three forms:
3−144
-acl aclpatt
Match all files that have ACLs that include all (zero or more) pattern entries
specified by the aclpatt pattern.
-acl =aclpatt
Match a file only if its ACL includes all (zero or more) pattern entries specified by
the aclpatt pattern, and every entry in its ACL is matched by at least one pattern
entry specified in the aclpatt pattern.
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
-acl opt
find(1)
Match all files that have ACLs that include optional ACL entries.
By default, -acl is TRUE for files that have access control lists that include all the access control
list patterns in aclpatt. The ACL for a file can also contain unmatched entries.
If aclpatt begins with =, the remainder of the string must match all entries in the access control list
of the file.
An aclpatt consists either of a type field, an ID field, and a mode field, or a type field and a mode
field. The fields are separated by colons. You can specify multiple comma-separated aclpatts.
The type field is one of user, group, class, other or *, optionally preceded by default:. The
literals user, group, class, other, and default can be abbreviated to u, g, c, o, and d, respectively.
A type field of * matches any of the preceding types. If the type field is class, other, or *, the ID
field is not allowed (for example, -acl *:rwx).
The ID field is either a numeric user or group ID, a user or group ID string from the system user
authentication database or group database, respectively, or *, which matches any ID.
The mode field consists of a string of three characters. The first character is either r, indicating
that read permission is granted; -, indicating that read permission is denied; or ?, which matches
either state of read permission. The second character is either w, -, or ?, which similarly indicate
the state of write permission; and the third character is either x, -, or ?, which indicates the state of
execute permission.
As a special case, if aclpatt is the value opt, the expression is true for files with optional access
control list entries.
Environment Variables
The following environment variables affect the execution of the find command:
UTILSGE
Specifies that Hewlett Packard Enterprise extensions to the root directory should
be omitted when the initial directory is root and a recursive operation occurs in an
OSS shell command. Application programs that test this variable might also
honor its settings.
The UTILSGE value can be any of the following:
NOE
Omit the /E directory.
NOG
Omit the /G directory.
NOG:NOE
Omit both the /G and /E directories.
The effect of assigning a value to the UTILSGE environment variable is the same
as specifying the -W NOG or -W NOE flag in the command.
EXAMPLES
1.
To list all files in the file system with a given base filename, enter:
find / -name .profile
This command searches the entire file system and writes the complete pathnames of all
files named .profile. The / (slash) tells the find command to search the root directory and
all of its subdirectories. This search may take a while, so it is best to limit the search by
specifying the directories where you think the files might be.
527188-024
Hewlett Packard Enterprise
3−145
find(1)
OSS Shell and Utilities Reference Manual
2.
To list the files with a specific permission code in the current directory tree, enter:
find . -perm 0600
This command lists the names of the files that have only owner-read and owner-write permission. The . (dot) tells the find command to search the current directory and its subdirectories. See the reference page for the chmod command for details about permission
codes. Alternatively, you could enter the following:
find . -perm u+rw
3.
To search several directories for files with certain permission codes, enter:
find manual clients proposals -perm -0600
This command lists the names of the files that have owner-read and owner-write permission and possibly other permissions. The directories manual, clients, and proposals, and
their subdirectories, are searched. Note that the expression -perm 0600 in the previous
example selects only files with permission codes that match 0600 exactly. In this example, the expression -perm -0600 selects files with permission codes that allow at least the
accesses indicated by 0600. This command also matches the permission codes 0622 and
2744.
4.
To search for files on the local node that have the PRIVSETID privilege, enter:
find /bin -priv PRIVSETID -print
5.
To search for regular files with multiple links, enter:
find . -type f -links +1
This lists the names of the ordinary files (-type f) that have more than one link (-links +1).
Note that every directory has at least two links: the entry in its parent directory and its
own . (dot) entry. See the reference page for the ln command for details about multiple
file links.
6.
To search for the file f1 among the OSS files on the remote node node1, enter:
export UTILSGE=NOG
find /E/node1 -name f1 -print
7.
To search for the file f1 among the OSS files on the local node, enter:
find / -W NOG -W NOE -name f1 -print
8.
To find all files not owned by user karl that have access control lists with at least one entry
associated with karl, and one entry for no specific user in group bin with the read bit on
and the write bit off, enter:
find / ! -user karl -acl u:karl:???,g:bin:r-? -print
9.
To find all files that have a read bit set in any access control list entry, enter:
find / -acl *:r?? -print
10. To find all files that have the write bit unset and execute bit set in every access control list
entry, enter:
find / -acl =*:?-x -print
3−146
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
find(1)
11. To find all files that have optional access control list entries, enter:
find / -acl opt -print
NOTES
Because /G and /E both appear in your local root directory, you should be very careful when using
OSS shell commands on or from the root directory. OSS shell commands that perform recursive
actions make no distinction between Guardian and OSS files or between local and remote files.
You can use the -W NOG and -W NOE flags or the UTILSGE environment variable to exclude
objects in the Guardian file system or objects accessible through the Expand product.
EXIT VALUES
The find command returns a 0 (zero) if all the paths are visited without error. The find command
returns a nonzero value if it encounters an error.
RELATED INFORMATION
Commands: chmod(1), getfilepriv(1), grep(1), ln(1), setacl(1), setfilepriv(1), sh(1), test(1).
Functions: stat(2).
Miscellaneous topics: acl(5).
STANDARDS CONFORMANCE
The -W NOG and -W NOE flags and the UTILSGE environment variable are Hewlett Packard
Enterprise extensions to the XPG4 Version 2 specification.
527188-024
Hewlett Packard Enterprise
3−147
flex(1)
OSS Shell and Utilities Reference Manual
NAME
flex - Generates a C language lexical analyzer
SYNOPSIS
flex [-bcdfinpstvFILT8] -C[efmF] [-Sskeleton] [file ...]
FLAGS
-b
Generates backtracking information to file lex.backtrack. This is a list of scanner states
that require backtracking and the input characters on which they backtrack. By adding
rules, you can remove backtracking states. If all backtracking states are eliminated and
the -f or -F flag is used, the generated scanner will run faster.
-d
Makes the generated scanner run in debug mode. Whenever a pattern is recognized and
the global yy_lex_debug is nonzero (which is the default value), the scanner writes to
the standard error file a line of the form:
--accepting rule at line 53 (&quot;the matched text&quot;)
The line number refers to the location of the rule in the file defining the scanner (the
input to the flex command). Messages are also generated when the scanner backtracks,
accepts the default rule, reaches the end of its input buffer (or encounters a NULL), or
reaches an End-of-File.
3−148
-f
Specifies full table (no table compression is done). The result is large but fast. This flag
is equivalent to -Cf.
-i
Instructs the flex command to generate a case-insensitive scanner. The case of letters
given in the flex input patterns is ignored, and tokens in the input are matched regardless
of case. The matched text given in the yytext variable will have the original case (as
read by the scanner).
-p
Generates a performance report to the standard error file. This identifies features of the
flex input file that will cause a loss of performance in the resulting scanner.
-s
Causes the default rule (that unmatched scanner input is echoed to the standard output
file to be suppressed. If the scanner encounters input that does not match any of its
rules, it aborts with an error.
-t
Instructs the flex command to write the scanner it generates to the standard output file
instead of to the file lex.yy.c.
-v
Specifies that the flex command should write to the standard error file a summary of
statistics regarding the scanner it generates.
-F
Specifies that the fast scanner table representation should be used. This representation is
about as fast as the full table representation (the -f flag), and for some sets of patterns it
will be considerably smaller (and for others, larger). This flag is equivalent to the -CF
flag.
-I
Instructs the flex command to generate an interactive scanner; that is, a scanner that
stops immediately rather than looking ahead if it knows that the currently scanned text
cannot be part of a longer rule’s match. Note that the -I flag cannot be used with full or
fast tables; that is, with the -f, -F, -Cf, or -CF flags.
-L
Instructs the flex command not to generate #line directives in the file lex.yy.c. The
default action is to generate such directives so error messages in the actions will be
correctly located with respect to the original flex input files.
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
flex(1)
-T
Makes the flex command run in trace mode. It generates a lot of messages to the standard output file concerning the form of the input and the resultant nondeterministic and
deterministic finite automata. This flag is mostly for use in maintaining the flex command.
-8
Instructs the flex command to generate an 8-bit scanner (the default scanner is a 7-bit
scanner).
-C[efmF]
Controls the degree of table compression. The default setting is -Cem, which provides
the highest degree of table compression. Faster-executing scanners can be traded off at
the cost of larger tables with the following generally being true:
Slowest and smallest
-Cem
-Cm
-Ce
-C
-C{f,F}e
-C{f,F}
Fastest and largest
-C flags are not cumulative; whenever the flag is encountered, the previous -C settings
are forgotten. The -f or -F and -Cm flags do not make sense together; there is no opportunity for meta-equivalence classes if the table is not being compressed. Otherwise, the
flags may be freely mixed.
527188-024
-C
Specifies that the scanner tables should be compressed and neither
equivalence classes nor meta-equivalence classes should be used.
-Ce
Directs the flex command to construct equivalence classes; for example,
sets of characters that have identical lexical properties. Equivalence
classes usually give dramatic reductions in the final table/object file
sizes (typically a factor of 2 to 5) and are inexpensive in terms of cost
versus performance (one array look-up per character scanned).
-Cm
Directs the flex command to construct meta-equivalence classes, which
are sets of equivalence classes (or characters, if equivalence classes are
not being used) that are commonly used together. Meta-equivalence
classes are often a benefit when using compressed tables, but they have
a moderate performance impact (one or two &quot;if&quot; tests and one array
look-up per character scanned).
-Cf
Specifies that the full scanner tables should be generated; the flex command should not compress the tables by taking advantage of similar
transition functions for different states.
-CF
Specifies that the alternative fast scanner representation should be used.
Hewlett Packard Enterprise
3−149
flex(1)
OSS Shell and Utilities Reference Manual
-Sskeleton
Overrides the default skeleton file from which the command constructs its scanners.
This is useful for flex maintenance or development.
-c
Specifies table-compression options. (Obsolescent)
-n
Suppresses the statistics summaries that the -v flag typically generates. (Obsolescent.)
DESCRIPTION
The lex and flex commands have the same functionality.
The flex command is a tool for generating scanners: programs that recognize lexical patterns in
text. flex reads the given input files, or its standard input file if no filenames are given or if a file
operand is - (dash), for a description of a scanner to generate. The description is in the form of
pairs of regular expressions and C code, called rules. flex generates as output a C source file,
named lex.yy.c, which defines a routine yylex(). This file is compiled and linked with the -ll
library to produce an executable. When the executable is run, it scans its input and the regular
expressions in its rules looking for the best match (longest input). When it has selected a rule it
executes the associated C code, which has access to the matched input sequence (commonly
referred to as a token). This process then repeats until input is exhausted.
flex treats multiple input files as one.
Syntax for flex Input
This subsection contains a description of the flex input files, which are normally named with a .l
suffix. It provides a listing of the special values, macros, and functions recognized by the flex command.
The flex input file consists of three sections, separated by a line with just %% in it:
[ definitions ]
%%
[ rules ]
[ %%
[ user_functions ] ]
where
definitions
Contains declarations to simplify the scanner specification and declarations of
start states, which are explained below.
rules
Describes what the scanner is to do.
user_functions Contains user-supplied functions, which are copied directly to file lex.yy.c.
With the exception of the first %% sequence, all sections are optional. The minimal scanner,
%%, copies its input to the standard output file.
Each line in the definitions section can be:
name regexp
Defines name to expand to regexp. name is a word beginning with a letter or an
underscore ( _ ) followed by zero or more letters, digits, underscores, or dashes ( ). In the regular-expression parts of the rules section, the command substitutes
regexp wherever you refer to {name} (name within braces).
%x state [ state ... ] or %s state [ state ... ]
Defines names for states used in the rules section. A rule can be made conditionally active based on the current scanner state. Multiple lines defining states can
appear, and each can contain multiple state names, separated by white space. The
name of a state follows the same syntax as that of regexp names except that
3−150
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
flex(1)
dashes ( - ) are not permitted. Unlike regexp names, state names share the C
#define namespace. In the rules section, states are recognized as &lt;state&gt; (state
within angle brackets).
The %x directive names exclusive states. When a scanner is in an exclusive state,
only rules prefixed with that state are active. Inclusive states are named with the
%s directive.
%{ or %}
When placed on lines by themselves, enclose C code to be passed verbatim into
the global definitions of the output file. Such lines commonly include preprocessor directives and declarations of external variables and functions.
space or tab
Appear at the beginning of lines in the definitions section that are to be passed
directly into the lex.yy.c output file, as part of the initial global definitions.
The rules section follows the definitions, separated by a line consisting of %%. The rules section
contains rules for matching input and taking actions, in the following format:
pattern [ action ]
pattern starts in the first column of the line and extends until the first nonescaped white space
character. The command attempts to find the pattern that matches the longest input sequence and
execute the associated action. If two or more patterns match the same input, the one that appears
first in the rules section is chosen. If no action exists, the matched input is discarded. If no pattern matches the input, the default action is to copy it to the standard output file.
All action code is placed in the yylex( ) function. Text (C code or declarations) placed at the
beginning of the rules section is copied to the beginning of the yylex( ) function and can be used in
actions. This text must begin with a space or a tab (to distinguish it from rules). In addition, any
input (beginning with a space or within %{ and %} delimiter lines) appearing at the beginning of
the rules section before any rules are specified is written to file lex.yy.c after the declarations of
variables for the yylex( ) function and before the first line of code in yylex( ).
Elements of each rule are:
state
A pattern can begin with a comma-separated list of state names enclosed by angle
brackets (&lt; state [,state...] &gt;). These states are entered through the BEGIN statement. If a pattern begins with a state, the scanner can recognize it only when in
that state. The initial state is 0 (zero).
regexp
A pattern can be a regular expression to match against the input stream. The regular expressions in the flex command provide a rich character-matching syntax.
The following characters, shown in order of decreasing precedence, have special
meanings:
x
Matches the character x.
&quot;&quot; (double quotes)
Enclose characters and treat them as literal strings. For example, &quot;*+&quot;
is treated as the asterisk character followed by the plus character.
\str (backslash)
If str is one of the characters a, b, f, n, r, t, or v, then represents the
ANSI C interpretation (for example, \n is a newline). If str is a string of
octal digits, it is interpreted as a character with octal value str. If str is a
string of hexadecimal digits with a leading x, it is interpreted as a character with that value. Otherwise, it is interpreted literally with no special meaning. For example, x\*yz represents the four characters x*yz.
527188-024
Hewlett Packard Enterprise
3−151
flex(1)
OSS Shell and Utilities Reference Manual
[ ] (brackets)
Represent a character class in the enclosed range ([.-.]) or the enclosed
list ([...]). The dash character ( - ) is used to define a range of characters
from the ASCII value or the 8-bit class of the character that comes
before the dash to the ASCII value or the 8-bit class of the character that
follows the dash. For example, [abcx-z] matches a, b, c, x, y, or z.
The circumflex ( ˆ ), when it appears as the first character in a character
class, indicates the complement of the set of characters within that class.
For example, [ ˆabc] matches any character except a, b, or c, including
special characters like newline. Similarly, [ ˆa-zA-Z] is any character
that is not a letter.
( ) (parentheses)
Group regular expressions. For example, (ab) is considered as a single
regular expression.
{ } (braces)
When enclosing numbers, indicate a number of consecutive occurrences
of the expression that comes before it. For example, (ab){1,5} indicates
a match for from 1 to 5 occurrences of the string ab.
When enclosing a name, the name represents a regular expression
defined in the definitions section. For example, {digit} will be replaced
with the defined regular expression for digit. Note that the expansion
takes place as if the definition were enclosed in parentheses.
. (dot)
Matches any single character except newline.
? (question mark)
Matches zero or one of the preceding expressions. For example, ab?c
matches both ac and abc.
* (asterisk)
Matches zero or more of the preceding expressions. For example, a* is
zero or more consecutive a characters. The utility of matching zero
occurrences is more obvious in complicated expressions. For example,
the expression [A-Za-z][A-Za-z0-9]* indicates all alphanumeric strings
with a leading alphabetic character, including strings that are only one
alphabetic character.
+ (plus sign)
Matches one or more of the preceding expressions. For example,
[a-z]+ is all strings of lowercase letters.
xy (concatenation)
Matches the expression x followed by the expression y.
(vertical bar)
Matches either the preceding expression or the following expression.
For example, abcd matches either ab or cd.
x/y (slash)
Matches expression x only if expression y (trailing context) immediately
follows it. For example, ab/cd matches the string ab but only if followed by cd. Only one trailing context is permitted per pattern.
3−152
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
flex(1)
^ (circumflex)
When it appears at the beginning of the pattern, matches the beginning
of a line. For example, ˆabc matches the string abc if it is found at the
beginning of a line.
$ (dollar sign)
When it appears at the end of a pattern, matches the end of a line. It is
equivalent to /\n. For example, abc$ matches the string abc if it is
found at the end of a line.
&lt;&lt;EOF&gt;&gt;
Matches an End-of-File.
&lt;x&gt; (angle bracket)
Identifies a state name (see earlier description of state) and can appear
only at the beginning of a pattern. For example, &lt;done&gt;&lt;&lt;EOF&gt;&gt;
matches an End-of-File, but only if it is in the state done.
In addition, the following rules apply for bracket expressions:
Equivalence class expressions
These represent the set of collating elements in an equivalence
class and are enclosed within bracket-equal delimiters ( [= =] ).
An equivalence class generally is designed to deal with primarysecondary sorting; that is, for languages like French that define
groups of characters as sorting to the same primary location, and
then have a tie-breaking, secondary sort. For example, if a, &agrave; (a
accent grave), and &acirc; (a circumflex) belong to the same
equivalence class, then [[=a=]b], [[=&agrave;=]b], and [[=&acirc;=]b] are each
equivalent to [a&agrave;&acirc;b].
NOTE: If you are viewing this reference page online using the
man command, the special characters are not displayed. See this
reference page in the Open System Services Shell and Utilities
Reference Manual.
Character class expressions
These represent the set of characters in the current locale belonging to the named ctype class. These are expressed as a ctype class
name enclosed in bracket-colon delimiters ([: :]).
In the C or OSS locale, the following character class expressions
are supported: [:alpha:], [:upper:], [:lower:], [:digit:],
[:alnum:], [:xdigit:], [:space:], [:print:], [:punct:], [:graph:],
and [:cntrl:].
Other locales may define additional character classes.
Letters and digits never have special meanings. A character such as ˆ or -, which
has a special meaning in particular contexts, refers simply to itself when found
outside that context. Spaces and tabs must be escaped to appear in a regular
expression; otherwise they indicate the end of the expression.
527188-024
Hewlett Packard Enterprise
3−153
flex(1)
action
OSS Shell and Utilities Reference Manual
Each pattern in a rule has a corresponding action, which can be any arbitrary C
statement. The pattern ends at the first nonescaped white space character; the
remainder of the line is its action. If the action is empty, then when the pattern is
matched, the input that matched it is discarded.
If the action contains a {, then the action scans till the balancing } is found, and
the action may cross multiple lines. Using a return statement in an action returns
from yylex().
An action consisting solely of a vertical bar (|) means same as the action for the
next rule.
flex variables that can be used within actions are:
yytext
Is a string (char *) containing the current matched input. It
cannot be modified.
yyleng
Is the length (int) of the current matched input. It cannot be
modified.
yyin
Is a stream (FILE *) that the lex and flex commands reads from
the standard input file by default. It can be changed, but
because of the buffering flex uses, changing the stream makes
sense only before scanning begins. Once scanning terminates
because an End-of-File was found, void yyrestart (FILE
*new_file) can be called to point yyin at a new input file. Alternatively, yyin can be changed whenever a new or different
buffer is selected (see yy_switch_to_buffer()).
yyout
Is a stream (FILE *) to which ECHO output is written (the
standard output file by default). It can be changed by the user.
YY_CURRENT_BUFFER
Returns the current buffer (YY_BUFFER_STATE) used for
scanner input.
flex macros and functions that can be used within actions are:
ECHO
Copies the yytext variable to the scanner’s output.
BEGIN state
Changes the scanner state to be state. This affects which rules are
active. The state must be defined in a %s or %x definition. The initial state of the scanner is INITIAL or 0 (zero).
REJECT
Directs the scanner to proceed immediately to the next best pattern
that matches the input (which may be a prefix of the current match).
The yytext and yyleng variables are reset appropriately. Note that
REJECT is a particularly expensive feature in terms of scanner performance; if it is used in any of the scanner’s actions, it slows down
all the scanner’s pattern matching operations. REJECT cannot be
used if the command is invoked with either the -f or -F flag.
yymore( ) Indicates that the next matched text should be appended to the
currently matched text in the yytext variable (rather than replace it).
3−154
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
yyless(n)
flex(1)
Returns all but the first n characters of the current token back to the
input stream, where they are rescanned when the scanner looks for the
next match. The yytext and yyleng variables are adjusted accordingly.
yywrap( ) Returns 0 (zero) if there is more input to scan or 1 if there is not. The
default yywrap( ) always returns 1. It is implemented as a macro.
yyterminate( )
Can be used instead of a return statement in an action. It terminates
the scanner and returns a 0 (zero) to the scanner’s caller.
yyterminate( ) is automatically called when an End-of-File is
encountered. It is a macro and can be redefined.
yy_create_buffer(file, size)
Returns a YY_BUFFER_STATE handle to a new input buffer large
enough to accommodate size characters and associated with the given
file. When in doubt, use YY_BUF_SIZE for the size.
yy_switch_to_buffer(new_buffer)
Switches the scanner’s processing to scan for tokens from the given
buffer, which must be a YY_BUFFER_STATE.
yy_delete_buffer(buffer)
Deletes the given buffer.
YY_NEW_FILE
Enables scanning to continue after the yyin variable has been
assigned a new file to process.
YY_DECL Controls how the scanning function, yylex( ), is declared. By default,
it is int yylex( ) or, if prototypes are being used, int yylex(void). This
definition can be changed by redefining the YY_DECL macro. This
macro is expanded immediately before the {...} (braces) that delimit
the scanner function body.
YY_INPUT(buf,result,max_size)
Controls scanner input. By default, YY_INPUT reads from the filepointer yyin variable. Its action is to place up to max_size characters
in the character array buf and return in the integer variable result
either the number of characters read or the constant YY_NULL to
indicate EOF. Following is a sample redefinition of YY_INPUT, in
the definitions section of the input file:
%{
#undef YY_INPUT
#define YY_INPUT(buf,result,max_size)\
{\
int c = getchar();\
result = (c == EOF) ? YY_NULL : (buf[0] = c, 1);\
}
%}
When the scanner receives an End-of-File indication from
YY_INPUT, it checks the yywrap( ) function. If yywrap( ) returns
zero, it is assumed that the yyin has been set up to point to another
527188-024
Hewlett Packard Enterprise
3−155
flex(1)
OSS Shell and Utilities Reference Manual
input file, and scanning continues. If it returns a nonzero value, then
the scanner terminates, returning zero to its caller.
YY_USER_ACTION
Can be redefined to provide an action that is always executed prior to
the matched pattern’s action.
YY _USER_INIT
Can be redefined to provide an action that is always executed before
the first scan.
YY_BREAK
Is used in the scanner to separate different actions. By default, it is
simply a break, but it can be redefined if necessary.
The user_functions section consists of complete C functions, which are passed directly into the
lex.y.cc output file (the effect is similar to defining the functions in separate .c files and linking
them with lex.y.cc). This section is separated from the rules section by the %% delimiter.
Comments, in C syntax, can appear anywhere in the user_functions or definitions sections. In the
rules section, comments can be embedded within actions. Empty lines or lines consisting of white
space are ignored.
The following macros are not normally called explicitly within an action, but they are used internally by the flex command to handle the input and output streams.
input( )
Reads the next character from the input stream. You cannot redefine input( ).
output( )
Writes the next character to the output stream.
unput(c)
Puts the character c back into the input stream. It will be the next character
scanned. You cannot redefine unput( ).
libl.a contains default functions to support testing or quick use of a flex program without the yacc
command; these functions can be linked in through -ll. They can also be provided by the user.
main( )
A simple wrapper that simply calls setlocale( ) and then calls the yylex( ) function.
yywrap( )
The function called when the scanner reaches the end of an input stream. The
default definition simply returns 1, which causes the scanner in turn to return 0
(zero).
EXAMPLES
1.
The following command processes the file lexcommands to produce the scanner file
lex.yy.c:
flex lexcommands
This is then compiled and linked by the command:
cc -oscanner lex.yy.c -ll
to produce a program scanner.
2.
The scanner program converts uppercase to lowercase letters, removes spaces at the end
of a line, and replaces multiple spaces with single spaces. The lexcommands file contains:
%%
[A-Z]
[ ]+$
3−156
putchar(tolower(yytext[0]));
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
[ ]+
flex(1)
putchar(’ ’);
FILES
flex.skel
Is the skeleton scanner.
lex.yy.c
Is the generated scanner C source.
lex.backtrack
Contains backtracking information generated from the -b flag.
NOTES
•
Some trailing context patterns cannot be properly matched and generate warning messages:
Dangerous trailing context
These are patterns where the ending of the first part of the rule matches the beginning of
the second part, such as zx*/xy*, where the x* matches the x at the beginning of the trailing context.
•
For some trailing context rules, parts that are actually fixed length are not recognized as
such, leading to the previously mentioned performance loss. In particular, patterns using
{n} (such as test{3}) are always considered variable length.
Combining trailing context with the special | (vertical bar) action can result in fixed trailing context being turned into the more expensive variable trailing context. This happens
in the following example:
%%
abc|
xyz/def
•
Use of the unput( ) macro invalidates the contents of the yytext and yyleng variables
within the current flex action.
•
Use of the unput( ) macro to push back more text than was matched can result in the
pushed-back text matching a beginning-of-line (ˆ) rule even though it did not come at the
beginning of the line.
•
Pattern matching of NULLs is substantially slower than matching other characters.
•
The flex command does not generate correct #line directives for code internal to the
scanner; thus, bugs in flex.skel yield invalid line numbers.
•
Due to both buffering of input and read-ahead, you cannot intermix calls to &lt;stdio.h&gt; routines, such as getchar( ), with flex rules and expect it to work. Call input( ) instead.
•
The total table entries listed by the -v flag excludes the number of table entries needed to
determine what rule was matched. The number of entries is equal to the number of deterministic finite-state automaton (DFA) states if the scanner does not use REJECT, and is
somewhat greater than the number of states if it does.
•
REJECT cannot be used with the -f or -F flag.
RELATED INFORMATION
Commands: awk(1), lex(1), sed(1), yacc(1).
Files: locale(4).
527188-024
Hewlett Packard Enterprise
3−157
fold(1)
OSS Shell and Utilities Reference Manual
NAME
fold - Breaks lines in a file
SYNOPSIS
fold [-bs] [-w width] [file ...]
The fold command breaks lines in the specified files, or in the standard input file if no files are
specified, to have maximum width.
FLAGS
-b
Counts width in bytes rather than in column positions. In this case, the lines are not limited to LINE_MAX bytes.
-s
If a segment of a line contains a blank character within the first width column positions
(or bytes), breaks the line after the last such blank character, meeting the width constraints. If there is no blank character meeting the requirements, the -s flag does not
affect that output segment of the input line.
-w width Specifies the maximum width to which lines should be folded in column positions (or
bytes if -b is specified). The default value is 80.
DESCRIPTION
The fold command is a filter that folds lines from its input files, breaking the lines to have a maximum of width column positions (or bytes, if the -b flag is specified). The fold command breaks
lines by inserting a newline character so that each output line is the maximum width possible that
does not exceed the specified number of column positions (or bytes). A line cannot be broken in
the middle of a character.
The fold command is often used to send text files to line printers that truncate, rather than fold,
lines wider than the printer is able to print (usually 80 or 132 column positions).
If the &lt;backspace&gt;, &lt;tab&gt;, or &lt;carriage-return&gt; characters are encountered in the input and the
-b flag is not specified, these characters are treated specially:
&lt;backspace&gt;
The current count of line width is decremented by one, although the count never
becomes negative. The fold command does not insert a newline character immediately
before or after any backspace character.
&lt;tab&gt;
Each tab character encountered advances the column position pointer to the position of
the next tab stop. Tab stops are at each column position number, such that number
modulo 8 equals 1.
&lt;carriage-return&gt;
The current count of the line width is set to 0 (zero). The fold command does not insert
a newline immediately before or after any carriage-return character.
Note that the fold command may affect any underlining that is present.
EXAMPLES
The fold command can be used to prepare files to be joined side-by-side with the paste command.
You might want to display these two files, az and AZ, side-by-side:
aaaa bbbb cccc dddd eeee ffff gggg hhhh iiii jjjj kkkk llll mmmm
nnnn oooo pppp qqqq rrrr ssss tttt uuuu vvvv wwww xxxx yyyy zzzz
AAAA BBBB CCCC DDDD EEEE FFFF GGGG HHHH IIII JJJJ KKKK LLLL MMMM
NNNN OOOO PPPP QQQQ RRRR SSSS TTTT UUUU VVVV WWWW XXXX YYYY ZZZZ
3−158
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
fold(1)
The following command line:
fold -w 32 az &gt; az2; fold -w 32 AZ &gt; AZ2; paste -d&quot; &quot; az2 AZ2
results in the output below:
aaaa bbbb cccc dddd eeee ffff gg
gg hhhh iiii jjjj kkkk llll mmmm
nnnn oooo pppp qqqq rrrr ssss tt
tt uuuu vvvv wwww xxxx yyyy zzzz
AAAA BBBB CCCC DDDD EEEE FFFF GG
GG HHHH IIII JJJJ KKKK LLLL MMMM
NNNN OOOO PPPP QQQQ RRRR SSSS TT
TT UUUU VVVV WWWW XXXX YYYY ZZZZ
EXIT VALUES
The fold command returns the following values:
0
All input files were successfully processed.
1
A usage error occurred.
2
An input file cannot be opened. The fold command continues processing the other input
files specified on the command line.
RELATED INFORMATION
Commands: expand(1), paste(1), unexpand(1).
527188-024
Hewlett Packard Enterprise
3−159
ftp(1)
OSS Shell and Utilities Reference Manual
NAME
ftp - Transfers files between a local OSS file system and a remote host
SYNOPSIS
ftp [-dginv] [host]
The ftp command is the interface to the File Transfer Protocol (FTP). This command uses OSS
FTP to transfer files between the local host and a remote host or between two remote hosts. OSS
FTP only runs in an OSS shell environment. The Guardian FTP client runs in a Guardian environment.
FLAGS
The following flags can be entered on the shell command line. (The ftp command equivalents can
also be entered at the ftp&gt; prompt.)
-d
Enables debugging by turning on the logging feature. See the debug subcommand.
-g
Disables the expansion of metacharacters in filenames. Interpreting metacharacters may
be referred to as expanding (sometimes called globbing) a filename. See the glob subcommand.
-i
Disables interactive prompting during multiple file transfers. See the prompt, mget,
mput, and mdelete subcommands for descriptions of prompting during multiple file
transfers.
-n
Prevents an automatic login on the initial connection. Otherwise, ftp searches for a
$HOME/.netrc entry that describes the login and initialization process for the remote
host. See the user subcommand.
-v
Displays all the responses from the remote server and provides data transfer statistics.
This is the default display mode when the output of the ftp command is to a device, such
as the console or a display. However, if output is redirected, such as through a pipe or to
a file, or if the ftp command is started by a daemon, such as the cron daemon, verbose
mode is not in effect unless the -v flag or the verbose subcommand is used. See the verbose subcommand.
DESCRIPTION
The OSS FTP client transfers data between a local host with an OSS file system and a remote host
that can use a dissimilar file system. Therefore, although the protocol provides a lot of flexibility
for transferring data, it does not attempt to preserve file attributes that are specific to a particular
file system (for example, the protection mode or modification times of a file). Additionally, the
FTP protocol makes few assumptions about the overall structure of a file system and does not provide or allow such things as recursively copying subdirectories.
The ftp command provides subcommands for tasks such as listing remote directories, changing the
current local and remote directory, transferring multiple files in a single request, creating and
removing directories, and escaping to the local shell to perform shell commands. The ftp command also provides for security by sending passwords to the remote host and permits automatic
login, file transfer, and logoff.
If you execute ftp and do not specify a hostname, ftp immediately displays the ftp&gt; prompt and
waits for an ftp subcommand. To connect to a remote host, you then execute the open subcommand. When the ftp command connects to the remote host, ftp then prompts for the username and
password before displaying the ftp&gt; prompt again. ftp fails if no password is defined at the
remote host for the specified username.
If you do specify the name of a remote host, ftp immediately tries to establish a connection to the
specified host. If ftp connects successfully, ftp searches for a local $HOME/.netrc file in your
current directory or home directory. If the file exists, ftp searches the file for an entry that initiates
3−160
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
ftp(1)
the login process and command macro definitions for the remote host. If the $HOME/.netrc file
or autologin entry does not exist, ftp prompts you for a username and password. This occurs
whether or not the hostname is entered on the command line.
If ftp finds a $HOME/.netrc autologin entry for the specified host, ftp attempts to use the information in that entry to automatically log into the remote host. The ftp command also loads any command macros defined in the entry. In some cases (for example, when the required password is not
listed in an autologin entry), ftp prompts for the password before displaying the ftp&gt; prompt.
Once ftp completes the autologin process, ftp executes the init macro if the macro is defined in the
autologin entry. If the init macro does not exist or does not contain a quit or bye command, ftp
then displays the prompt and waits for a subcommand.
The remote username that you specify either at the prompt or in a $HOME/.netrc file must exist
and have a password defined at the remote host, or ftp fails.
The ftp command interpreter, which handles all commands entered at the ftp&gt; prompt, provides
facilities that are not available with most file transfer programs, such as: the handling of filename
arguments to ftp commands, the ability to collect a group of commands into a single command
macro, and the ability to load macros from a $HOME/.netrc file. These facilities are designed to
allow simplifying repeated tasks and to allow using ftp in unattended mode. The ftp command
interpreter does not support entry of commands (including the arguments) longer than 198 characters at the ftp&gt; prompt.
The command interpreter handles filename arguments according to the following rules:
•
If a - (dash) is specified for the argument, standard input is used for read operations and
standard output is used for write operations.
•
Failing the preceding check, if globbing is enabled, local filenames are expanded according to the rules used in csh; (see the glob subcommand). If the ftp command expects a
single local file (for example, put), the pattern-matching characters following the put
command are interpreted as a file name.
•
For get and mget subcommands with unspecified local filenames, the local filename is the
same as the remote filename, which may be altered by a case, ntrans, or nmap setting.
The resulting filename can then be altered if runique is on.
•
For mput commands and put commands with unspecified remote filenames, the remote
filename is the same as the local filename, which can be altered by a ntrans or nmap setting. The resulting filename can then be altered by the remote server if sunique is on.
•
If the first argument is /G, the Guardian file space is accessed. The &quot;G&quot; must be capitalized
(upper case) to access Guardian file space.
To end an ftp session when you are running interactively, use the bye or quit subcommand or the
End-of-File key sequence at the ftp&gt; prompt. To end a file transfer before it has been completed,
use the Interrupt key sequence. The default Interrupt key sequence is &lt;Ctrl-c&gt;.
The stty command can be used to redefine this key sequence. Sending transfers (those from the
local host to the remote host) are normally halted immediately. Receiving transfers are halted by
sending an FTP ABOR instruction to the remote FTP server and discarding all incoming file
transfer packets until the remote server stops sending them.
If the remote server does not support the ABOR instruction, the ftp&gt; prompt will not appear until
the remote server has sent all of the requested files. Additionally, if the remote server does something unexpected, the local ftp process may need to be ended manually.
527188-024
Hewlett Packard Enterprise
3−161
ftp(1)
OSS Shell and Utilities Reference Manual
SUBCOMMANDS
The following ftp subcommands can be entered at the prompt. If an argument for a subcommand
includes spaces, enclose the argument within &quot;&quot; (double quotes).
![command [argument ...]]
Invokes an interactive shell on the local host. An optional command, with one or more
optional arguments, can be specified.
$ macro [argument ...]
Executes the specified macro, previously defined with the macdef subcommand. Arguments are not expanded. See the macdef subcommand for further information.
? [subcommand]
Displays a help message describing the subcommand. If you do not specify subcommand, ftp displays a list of known subcommands.
account [password]
Sends a supplemental password that a remote host may require before granting access to
its resources. If the password is not supplied with the command, you are prompted for
the password. The password does not appear on the screen.
append local_file [remote_file]
Appends a local file to a file on the remote host. If the remote filename is not specified,
the local filename is used, altered by any setting made with the ntrans or nmap subcommand. The append subcommand uses the current values for form, mode, struct, and
type while appending the file. For more information on these subcommands, see their
individual descriptions.
ascii
Sets the file transfer type to network ASCII. This is the default. File transfer may be
more efficient with binary-image transfer. File transfers to the Guardian (/G) file system
will always arrive as Guardian file type 180.
bell
Sounds a bell after the completion of each file transfer.
binary
Sets the file transfer type to binary image. This can be more efficient than an ASCII
transfer. Attempts to transfer binary-image files without specifying this subcommand
can lead to corrupt data, since linefeeds and carriage returns are interpreted differently
by the ascii subcommand. File transfers to the Guardian (/G) file system will always
arrive as Guardian file type 180.
bye
Ends the File Transfer session and exits ftp. Same as quit. An End of File key sequence
(default control-D) also terminates the session and exits.
case
Sets a toggle for the case of filenames. When case is on, remote filenames that appear in
all capital letters are changed from uppercase to lowercase when written in the local
directory. The default is off (uppercase remote filenames are written in uppercase in the
local directory).
cd remote_directory
Changes the remote working directory to the specified directory.
3−162
cdup
Changes the working directory on the remote host to the parent of the current directory.
close
Ends the File Transfer session, but does not exit ftp. Defined macros are erased. Same
as disconnect.
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
cr
ftp(1)
Strips the carriage-return character from a carriage-return/linefeed sequence when
receiving records during ASCII-type file transfers. (ftp terminates each ASCII-type
record with a carriage-return/linefeed sequence during file transfers.) This conforms
with the UNIX system convention for terminating records with a single linefeed.
Records on remote hosts that have different record termination conventions may have
single linefeeds embedded in records. To distinguish these embedded linefeeds from
record delimiters, set cr to off. cr toggles between on and off.
delete remote_file
Deletes the specified remote file.
debug [on | off]
Prints each command sent to the remote host preceded by the string --&gt; when debug on
is specified.
dir [remote_directory][local_file]
Writes a listing of the contents of remote_directory to the file local_file. If
remote_directory is not specified, dir lists the contents of the current remote directory.
If local_file is not specified or is a - (dash), dir displays the listing on the local terminal.
disconnect
See close.
form format
Specifies the form of the file transfer. The only form available is file.
get remote_file [local_file]
Copies the remote file to the local host. If local_file is not specified, the remote filename
is used locally and is altered by any settings made by the case, ntrans, and nmap subcommands. The ftp command uses the current settings for type, form, mode, and struct
while transferring the file. For additional information, refer to the description of each of
these subcommands.
glob
Toggles filename expansion (globbing) for mdelete, mget, and mput. If globbing is off,
filename arguments for these subcommands are not expanded. When globbing is
enabled and a pattern-matching character is used in a subcommand that expects a single
filename, results may be different than expected. For example, the append and put subcommands perform filename expansion and then use only the first filename generated.
Other ftp subcommands, such as cd, delete, get, rename, and rmdir, do not perform
filename expansion and take the pattern-matching characters literally.
Globbing for the mput subcommand is done locally in the same way as for the csh command. For mdelete and mget, each filename is expanded separately at the remote
machine and the lists are not merged. The expansion of a directory name may be
different than the expansion of a filename, depending on the remote host and the ftp
server.
To preview the expansion of a directory name, use the mls subcommand:
mls remote_file -
To transfer an entire directory subtree of files, transfer a tar archive of the subtree in
binary form, rather than using mget or mput.
527188-024
Hewlett Packard Enterprise
3−163
ftp(1)
OSS Shell and Utilities Reference Manual
hash
Toggles # (hash sign) printing. When hash is on, ftp displays one hash sign for each
data block (1024 bytes) transferred.
help [subcommand]
Displays help information. Refer to the ? subcommand.
lcd [directory]
Changes the working directory on the local host. If you do not specify a directory, ftp
uses your home directory.
ls [remote_directory] [local_file]
See the dir subcommand.
macdef macro
Defines a subcommand macro. Subsequent lines up to a null line (two consecutive
linefeeds) are saved as the text of the macro. Up to 16 macros containing at most 4096
bytes for all macros can be defined. Macros remain defined until redefined or a close is
executed.
The special characters $ (dollar sign) and \ (backslash) have special uses in ftp macros.
A $ followed by one or more numbers is replaced by the corresponding macro parameter
on the invocation line (refer to the $ subcommand). A $ followed by an i indicates that
the macro is to loop, with $i being replaced by consecutive parameters on each pass.
The first macro parameter is used on the first pass, the second parameter is used on the
second pass, and so on. A \ prevents special treatment of the next character. Use the \ to
turn off the special meanings of $ and \.
mdelete remote_files
Expands remote_files and deletes the indicated remote files.
mdir [remote_directory ... local_file]
Expands remote_directory at the remote host and writes a listing of the contents of the
remote_directory to the local_file. If the remote_directory argument contains a patternmatching character, mdir prompts for a local_file if none is specified. If the
remote_directory argument is a list of remote directories, separated by spaces, the last
argument in the list must be either a local filename or a - (dash). If local_file is -, mdir
displays the listing on the local terminal. If interactive prompting is on (refer to the
prompt subcommand), ftp prompts you to verify that the last argument is a local file and
not a remote directory.
mget remote_file ...
Expands remote_files at the remote host and copies the indicated remote files to the
current directory on the local host. Refer to the glob subcommand for more information
on filename expansion. The remote filenames are used locally and are altered by any
settings made by the case, ntrans, and nmap subcommands. The ftp command uses the
current settings for type, form, mode, and structure while transferring the files. Refer
to the description of each of these subcommands for additional information.
mls [remote_directory ... local_file]
Expands remote_directory at the remote host and writes an abbreviated file listing of the
indicated remote directories to a local file. If the remote_directory argument contains a
pattern-matching character, mls prompts for a local_file if none is specified. If the
remote_directory argument is a list of remote directories, separated by spaces, the last
argument in the list must be either a local filename or a - (dash). If local_file is -, mls
displays the listing on the local terminal. If interactive prompting is on (refer to the
prompt subcommand), ftp prompts you to verify that the last argument is a local file and
not a remote directory.
3−164
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
ftp(1)
mode [mode]
Sets file transfer mode. The only mode available is stream.
modtime [remote_file]
Shows the last modification time of file remote_file on the remote machine.
mput [local_file ...]
Expands local_file at the local host and copies the indicated local files to the remote
host. Refer to the glob subcommand for more information on filename expansion. The
local filenames are used at the remote host and are altered by any settings made by the
ntrans and nmap subcommands. The ftp command uses the current settings for type,
form, mode, and structure while transferring the files. Refer to the description of each
subcommand for additional information.
nmap [inpattern outpattern]
Sets or unsets the filename mapping mechanism. If no arguments are specified, filename
mapping is turned off. If arguments are specified, source filenames are mapped for mget
and mput operations and for get and put operations when the destination filename is not
specified. This subcommand is useful when the local and remote hosts use different file
naming conventions or practices. Mapping follows the pattern set by inpattern and outpattern.
The inpattern variable specifies the template for incoming filenames, which may have
already been processed according to the case and ntrans settings. The template variables $1 through $9 can be included in inpattern. All characters in inpattern other than
$ and protected $s (that is, \$) define the values of the template variables. For example,
if the inpattern is $1.$2 and the remote filename is mydata.dat, the value of $1 is
mydata and the value of $2 is dat.
The outpattern variable determines the resulting filename. The variables $1 through $9
are replaced by their values as derived from inpattern and the variable $0 is replaced by
the original filename. Additionally, the sequence [sequence1,sequence2] is replaced by
the value of sequence1 if sequence1 is not null; otherwise, it is replaced by the value of
sequence2. For example, the following subcommand would yield myfile.data from
myfile.data or myfile.data.old, myfile.file from myfile, and myfile.myfile from .myfile:
nmap $1.$2.$3 [$1,$2].[$2,file]
Spaces can be included in outpattern. Use the \ (backslash) character to prevent the special meanings of $, [, ], and , (comma) in outpattern.
ntrans [in_characters [out_characters]]
Sets or unsets the filename character translation mechanism. If no arguments are
specified, character translation is turned off. If arguments are specified, characters in
source filenames are translated for mget and mput operations and for get and put operations when the destination filename is not specified. This subcommand is useful when
the local and remote hosts use different file naming conventions or practices. Character
translation follows the pattern set by in_characters and out_characters. Characters in a
source filename matching characters in in_characters are replaced by the corresponding
characters in out_characters. If the string in_characters is longer than the string
out_characters, characters in in_characters are deleted if they have no corresponding
character in out_characters.
527188-024
Hewlett Packard Enterprise
3−165
ftp(1)
OSS Shell and Utilities Reference Manual
open host [port]
Establishes a connection to the FTP server at the specified host. If the optional port
number is specified, ftp will attempt to connect to a server at that port. If the autologin
feature is set (that is, -n was not specified on the command line), ftp will attempt to
automatically log you into the FTP server. You must also have a $HOME/.netrc file
with the correct information in it and the correct permissions set.
prompt Toggles interactive prompting. If interactive prompting is on (the default), ftp will
prompt for verification before retrieving, sending, or deleting multiple files during mget,
mput, and mdelete operations. Otherwise, ftp will perform the operation on all files
specified.
proxy [subcommand]
Executes an ftp command on a secondary control connection. This subcommand allows
ftp to simultaneously connect to two remote FTP servers for transferring files between
the two servers. To establish the secondary control connection, specify open as the first
proxy subcommand. Enter the subcommand proxy ? to see the other ftp subcommands
that are executable on the secondary connection. The following subcommands behave
differently when prefaced by proxy:
•
The open subcommand does not define new macros during the autologin process.
•
The close subcommand does not erase existing macro definitions.
•
The get and mget subcommands transfer files from the host on the primary connection to the host on the secondary connection.
•
The put, mput, and append subcommands transfer files from the host on the
secondary connection to the host on the primary connection.
File transfers require that the FTP server on the secondary connection support the PASV
(passive) instruction.
put local_file [remote_file]
Stores a local file on the remote host. If you do not specify remote_file, ftp uses the
local filename to name the remote file, and the remote filename is altered by any settings
made by the ntrans and nmap subcommands. The ftp command uses the current settings for type, form, mode, and structure while transferring the files. Refer to the
description of each subcommand for additional information.
pwd
Displays the name of the current directory on the remote host.
quit
Ends the file transfer session and exits ftp. A synonym for bye.
quote string
Sends the specified string verbatim to the remote host. Unpredictable results can occur
when you quote commands that involve data transfers.
recv remote_file [local_file]
Copies the remote file to the local host. A synonym for get.
remotehelp [subcommand]
Requests help from the remote FTP server.
3−166
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
ftp(1)
rename from to
Renames a file on the remote host.
reset
Clears the reply queue. This command resynchronizes the command parsing.
restart marker
Restarts the immediately following get or put command at the indicated marker. On
systems that treat files as unstructured byte arrays (such as OSF/1 and UNIX systems),
marker is simply a byte offset into the file.
rmdir remote_directory
Removes the directory remote_directory at the remote host.
runique Toggles whether unique filenames are created for local destination files during get and
mget operations. If creating unique local filenames is not enabled (the default), ftp
overwrites local files. Otherwise, if a local file has the same name as specified for a
local destination file, ftp modifies the specified name of the local destination file with .1.
If a local file is already using the new name, ftp appends the postfix .2 to the specified
name. If a local file is already using this second name, ftp continues incrementing the
postfix until it either finds a unique filename or reaches .99 without finding a unique
name. If ftp cannot find a unique name, ftp reports an error and the transfer does not
take place. Note that runique does not affect local filenames generated from a shell
command. When transferring a file ending in .1 (or any other digit) to a /G Guardian file
system, the period (.) is dropped from the resulting Guardian file name.
send local_file [remote_file]
Stores a local file on the remote host. A synonym for put.
sendport
Toggles the use of FTP PORT instructions. By default, ftp uses a PORT instruction
when establishing a connection for each data transfer. When the use of PORT instructions is disabled, ftp does not use PORT instructions for data transfers.
size filename
Displays the size of the file, filename, on the remote system in bytes.
status
Displays current status of ftp.
struct [structure]
Sets data transfer structure type. The only structure supported is stream.
sunique Toggles whether unique filenames are created for remote destination files during put and
mput operations. If creating unique remote filenames is not enabled (the default), ftp
overwrites remote files. Otherwise, if a remote file has the same name as specified for a
remote destination file, the remote FTP server modifies the name of the remote destination file. Note that the remote server must support the STOU instruction.
trace
Toggles packet tracing.
type [type]
Sets the file transfer type to type. If type is not specified, the current type is printed. The
default type is ascii. Note that binary transfer (type binary) can be more efficient than
ASCII transfer. File transfers to the Guardian (/G) file system will always arrive as
Guardian file type 180.
527188-024
Hewlett Packard Enterprise
3−167
ftp(1)
OSS Shell and Utilities Reference Manual
user user [password] [account]
Identifies the local user as user to the remote FTP server. If password or account is not
specified and the remote server requires it, ftp prompts for it locally. If account is
required, ftp sends it to the remote server after the remote login process completes.
Note that, unless autologin is disabled by specifying -n on the command line, this process is done automatically for the initial connection to the remote server. You also need
a $HOME/.netrc file in your home directory to issue an autologin.
verbose Toggles verbose mode. When verbose mode is on (the default), ftp displays all
responses from the remote FTP server. Additionally, ftp displays statistics on all file
transfers when the transfers are completed.
Aborting a File Transfer
To abort a file transfer, use the Interrupt key sequence (often &lt;Ctrl-c&gt;). Sending transfers will be
immediately halted. Receiving transfers will be halted by sending an FTP protocol ABOR command to the remote server, and discarding any further data received. The speed at which this is
accomplished depends upon the remote server’s support for ABOR processing. If the remote
server does not support the ABOR command, the prompt ftp&gt; does not appear until the remote
server has completed sending the requested file.
The Interrupt key sequence is ignored when ftp has completed any local processing and is awaiting a reply from the remote server. A long delay in this mode may result from the ABOR processing previously described, or from unexpected behavior by the remote server, including violations
of the FTP protocol. If the delay results from unexpected remote server behavior, the local ftp
program must be killed by hand.
EXAMPLES
1.
This example shows how user smith, who is logged in on host1, can log in on the remote
host host2, check the current working directory on host2 and list its contents, transfer a
file, and then end the session.
$ ftp host2
If the connection to host2 is successful, a verification message is displayed on the local
system:
Connected to host2.abc.org
220 host2 FTP server (Version 5.47 13 Mar 90 02:27) ready.
Name (host2:smith): smith
Password:
Enter your name and password when prompted by the system. A message similar to the
following is then displayed on your local system:
230 User smith logged in
ftp&gt; _
To set the file transfer type to binary, enter the binary subcommand after the ftp&gt;
prompt:
ftp&gt; binary
A message similar to the following is displayed on your local system:
200 Type set to I
3−168
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
ftp(1)
To check the current working directory, enter the pwd command after the ftp&gt; prompt:
ftp&gt; pwd
A message similar to the following is displayed on your local system:
257 &quot;u/smith&quot; is current directory
To list the contents of the current working directory, enter the ls command after the ftp&gt;
prompt:
ftp&gt; ls
A message similar to the following is displayed on your local system:
200 PORT command successful.
150 Opening data connection for /usr/bin/ls
(555.5.55.555) (0 bytes)
printfile
testfile
226 Transfer complete.
(The Opening data connection message appears on one line, not on two lines as
shown.)
To transfer a file from the remote host to the local host, enter the get or mget subcommand
following the ftp&gt; prompt:
ftp&gt; get testfile tmp.testfile
A message similar to the following is displayed on your local system:
200 PORT command successful.
150 Opening data connection for testfile
(555.5.55.555) (1201 bytes)
226 Transfer complete.
local:tmp.testfile remote:testfile
(The Opening data connection message appears on one line, not on two lines as
shown.)
To end the ftp session, enter the quit subcommand after the ftp&gt; prompt:
ftp&gt; quit
221 Goodbye.
$_
2.
This example shows how user smith, who is logged in on host1, can log in as the user
smith on the remote host host2:
$ ftp host2
Connected to host2.abc.org
220 host2 FTP server (Version 5.47 13 Mar 90 02:27) ready.
Name (host2:smith): smith
527188-024
Hewlett Packard Enterprise
3−169
ftp(1)
OSS Shell and Utilities Reference Manual
331 Passwd required for smith
Password:
230 User smith logged in
ftp&gt;
3.
In this example, user smith makes a typing error:
$ ftp test
Connected to test.abc.org
220 test FTP server (Version 5.47 13 Mar 90 02:27) ready.
Name (test:fred): msith
331 Passwd required for msith
Password:
530 User msith unknown
ftp&gt; user smith
331 Passwd required for smith
Password:
230 User smith logged in
ftp&gt;
4.
In this example, user fred issues the ftp command without specifying a hostname, then
connects to host1 using the open subcommand:
$ ftp
ftp&gt; open host1
Connected to host1.abc.org
220 host1 FTP server (Version 5.47 13 Mar 90 02:27) ready.
Name (host1:fred): fred
331 Passwd required for fred
Password:
230 User fred logged in
ftp&gt;
FILES
$HOME/.netrc
Contains automatic login information.
NOTES
You can specify the OSS sockets transport provider process used by ftp in either of the following
ways:
•
Set the Guardian PARAM SOCKETˆTRANSPORTˆNAME in the Guardian TACL session
that subsequently starts the OSS shell session in which ftp is started. Use the following
format:
PARAM SOCKETˆTRANSPORTˆNAME process_name
For example:
PARAM SOCKETˆTRANSPORTˆNAME $ZTC1
•
3−170
Set the environment variable SOCKET_TRANSPORT_NAME in the OSS shell session
from which ftp is started. Use the following format:
Hewlett Packard Enterprise
527188-024
User Commands (d - f)
ftp(1)
EXPORT SOCKET_TRANSPORT_NAME=\process_name
For example:
EXPORT SOCKET_TRANSPORT_NAME=\$ZTC1
When the PARAM is specified, it becomes the corresponding environment variable when the OSS
shell is started.
RELATED INFORMATION
Commands: sh(1), ftpserver(7), stty(1).
Files: netrc(4).
527188-024
Hewlett Packard Enterprise
3−171
Section 4. User Commands (g - j)
This section contains reference pages for the Open System Services (OSS) user
commands with names starting with the letters g through j.
527188-024
Hewlett Packard Enterprise
4−1
gencat(1)
OSS Shell and Utilities Reference Manual
NAME
gencat - Creates and modifies a message catalog
SYNOPSIS
gencat catalog_file [source_file ...]
FLAGS
Operands
FLAGS
Operands
catalog_file
source_file
is the name of a message catalog file. The naming convention for message catalog files uses the .cat extension.
is a text file you create to hold messages printed by your program. The naming
convention for message source files uses the .msg extension. You can use any
text editor to enter messages into the text source file. Messages can be grouped
into sets that represent general functional subsets of your program. Each message has a numeric identifier, which must be unique within its set. The message
source file can also contain commands recognized by gencat for manipulating
sets and individual messages.
DESCRIPTION
The gencat command can be used to create a message catalog (usually ending in .cat) from a
message text source file (usually ending in .msg).
A message text source file is a text file that you create to hold messages printed by your program.
Message source files usually have the .msg suffix. You can use any text editor to enter messages
into the text source file. Messages can be grouped into sets, generally to represent functional
subsets of your program. Each message has a numeric identifier, which must be unique within its
set. The message text source file can also contain commands recognized by gencat for manipulating sets and individual messages.
The gencat utility does not recognize symbolic names for messages. If you use symbolic names
rather than numeric constants to refer to messages, use the mkcatdefs utility to preprocess the
source_file. The mkcatdefs utility accepts symbolic names and their associated messages; the
output generated by the mkcatdefs utility is used as input to gencat.
If a message catalog with the name catalog_file exists, gencat modifies it according to the statements in the message source files. If it does not exist, gencat creates a catalog file with the name
catalog_file.
You can specify any number of message text source files. The gencat command processes multiple source files one after the other in the sequence that you specify them. Each successive source
file modifies the catalog. If you do not specify a source file, the gencat command accepts message source data from standard input. Note that you can specify a dash (-) for the catalog file
(standard output) or the source file (standard input).
The gencat utility conforms to the XPG4 specification. In an XPG4-conforming application, set
numbers must be integers in the range of 1 to NL_SETMAX, inclusive, and message numbers
must be integers in the range of 1 to NL_MSGMAX, inclusive.
The catalog_file can contain the following commands. Each initial keyword or number must be
followed by a space or a tab character. The gencat utility ignores any line beginning with a
space, a tab, or a $ (dollar sign) character followed by a space, a tab, or a newline character.
Thus, you can use these sequences to start comments in your catalog_file. Blank lines are also
ignored. Finally, you can place comments on the same line after the $delset, $quote, $len, or
$set commands, because the gencat utility ignores anything following the preceding syntax elements.
4−2
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
gencat(1)
message_number text
Inserts text as a message with the identifier message_number. There must be exactly
one blank, space, or tab character between message number and text. Numbers must
be ascending within each set, but need not be contiguous. If the message text is empty,
and a space field separator is present, an empty string is stored in the message catalog.
If a message source line has a message number and nothing else, the existing message
associated with message number (if any) is deleted from the catalog. The length of text
must be in the range 0 through NL_TEXTMAX.
$delset set_number
Deletes the set of messages indicated by set_number. You cannot use symbolic
identifiers with the $delset command.
$quote character
Sets the quote character to character. See the explanation later in this section for more
information. By default, or if the $quote command was last used with no argument, no
quote character is defined.
$len [max_length]
Sets the maximum length allowed for messages in your catalogue. If this command is
not used, or if you use it without the max_length argument, or if the specified value of
max_length is not between 1 and the value of NL_TEXTMAX, inclusive, the maximum length defaults to the value of NL_TEXTMAX.
$set set_number
Indicates that all messages entered after this command are placed in the set indicated
by set_number. You can change the set by entering another $set command. However,
set numbers must be entered in ascending order; you can not go back to a lowernumbered set during the gencat session. If the command is not used, the default set
number is 1.
A line beginning with a digit marks a message to be included in the catalog. The first blank
(space or tab) character following the digit is the field separator. The rest of the line is considered to be message text unless the first character after the blank is the quote character. In this
case the message text extends from just after the initial quote character to just before the next
unescaped quotation mark character. The rest of the line is ignored.
Escape sequences, like those recognized by the C language, can be used in text; they are listed
after the commands. Use a backslash (\) character to continue message text on the following
line.
The gencat command does not accept symbolic identifiers. If you use symbolic identifiers you
must use the mkcatdefs utility to preprocess a message source file and change symbolic
identifiers into numeric constants.
The Escape character \ (backslash) can be used to include the following special characters in the
message text:
\n
Inserts a newline character.
\t
Inserts a horizontal tab character.
\v
Inserts a vertical tab.
\b
Performs a backspace function.
\r
Inserts a carriage return.
527188-024
Hewlett Packard Enterprise
4−3
gencat(1)
OSS Shell and Utilities Reference Manual
\f
Inserts a formfeed character.
\\
Inserts a \ (backslash) character.
\ddd
Inserts the single-byte character associated with the octal value represented by the
octal digits ddd. You can specify 1, 2, or 3 octal digits; however, you must include
leading zeros if the characters following the octal digits are also valid octal digits. For
example, the octal value for $ (dollar sign) is 44. To insert $5.00 into a message, use
\0445.00, not \445.00, or the 5 will be parsed as part of the octal value.
\xdddd
Inserts the single-byte or double-byte character associated with the hexadecimal value
represented by the four valid hexadecimal digits dddd. You can specify either two or
four digits. See the explanation of \ddd for a way to avoid parsing errors when the hexadecimal value precedes an actual digit. This escape sequence is an Open System Services extension to the XPG4 specification.
You can also include printf( ) conversion specifications in messages that are printed by the
printf( ) family of calls in C code. If you display a message from a shell script with the dspmsg
command, the only conversion specifications that can be used in the message are %s and %n$s.
When you enter a number followed by a message, gencat removes the first space or tab character
immediately following the number. Any spaces or tabs that follow the first space or tab are considered part of the message.
Environment Variables
The following environment variables affect the execution of the gencat utility: LANG,
LC_ALL, LC_TYPE, LC_MESSAGES, NLSPATH.
EXAMPLES
1.
To use the $set command in a source file to give a group of messages a set number, enter:
$set 10 Communication Error Messages
The message set number is 10. All messages following the $set command are assigned
that set number, up until the next occurrence of a $set command. (Set numbers must be
assigned in ascending order, but need not be contiguous. Large gaps in the number
sequence are discouraged in order to increase efficiency and performance. There is no
performance advantage to using more than one set number in a catalog.)
You can include a comment in the $set command, but it is not required.
2.
To use the $delset command to remove all messages belonging to the specified set from a
catalog, enter:
$delset 10 Communication Error Messages
The command set affected by the $delset command is specified by the number argument.
$delset must be placed in the proper set number order with respect to any $set commands in the same message source file. You can include a comment in the $delset command.
3.
To enter message text and assign message ID numbers, enter:
12 file removed
This assigns the message ID number 12 to the text that follows it.
You must specify a single space or tab character between the message ID number and the
message text, but you can include more spaces or tabs if you prefer. Any extra spaces or
tabs included are treated as part of the message itself. Message numbers must be in
ascending order within a single message set, but need not be contiguous.
All text following the message number is included as message text, up to the end of the
4−4
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
gencat(1)
line. If you place the escape character \ (backslash) as the last character on the line, the
message text continues on the following line. Consider the following example:
This is the text associated with \
message number 5.
The preceding two lines define this single-line message:
This is the text associated with message number 5.
4.
The following example shows the use of the $quote command:
$quote &quot;
Use a double quote to delimit message text
$set 10
Message Facility - Quote command messages
1 &quot;Use the $quote command to define a character \
\n for delimiting message text&quot; \n
2 &quot;You can include the \&quot;quote\&quot; character in a message \n \
by placing a \ in front of it&quot; \n
3 You can include the &quot;quote&quot; character in a message \n \
by beginning it with any other character $quote
4 You can disable the quote mechanism by \n \
using the $quote command without \n a character \
after it \n
In this example, the $quote command defines the &quot; (double quote) as the quote character. The quote character must immediately follow the message number and the single
blank character. Any text following the next occurrence of the quote character is
ignored.
The example shows two ways the quote character can be included in the message text:
•
Place a single backslash (\) in front of the quote character.
•
Begin the message text with another character, as in message 3. The quote character is not treated specially unless it is the first character after the blank.
The example shows the following:
•
A backslash (\) is still required to split a quoted message across lines, as in messages 2, 3, and 4.
•
To display a \ in a message, you must place another \ in front of it, as in message 1.
•
You can format your message with a newline character by using \n, as in message 3.
•
If you use the $quote command with no character argument, you disable the
quote mechanism.
NOTES
The $len command is not described by X/OPEN. Other implementations of gencat may not
recognize $len.
DIAGNOSTICS
The gencat utility generates these error messages:
Usage: gencat CatalogFile [SourceFile...]
gencat: Cannot open target file \%s.\n
gencat: The realloc system call failed.
gencat: The following message text is longer than the en
527188-024
Hewlett Packard Enterprise
4−5
gencat(1)
OSS Shell and Utilities Reference Manual
value:\n\t\%s\n
gencat: The set number in the following line is not valid:\n\t\%s\n
gencat: The length of the hex number in the following line is not
valid.\n\
It must be either two or four digits.\n\t\%s\n
gencat: Reached end of line before the defined closing quote.\n\t\%s\n
gencat: The following message string is longer than
NL_TEXTMAX:\n\t\%s\n
gencat: Reached end of string before expected.\n\t\%s\n
gencat: Internal error: The file pointer offset is not correct.
gencat: Cannot load the catalog file \%x.\n
gencat: Cannot the existing catalog file \%s.\n
gencat: There is not enough memory available now.
gencat: The following set uses a symbolic identifier:\n\t\%s\n
gencat: The following message uses a symbolic identifier:\n\t\%s\n
gencat: There is no message defined in a source file.
gencat: Set or message numbers are not in ascending sequence after:
\n\tMessage:
\%d, Set: \%d\n\t\%s
EXIT VALUES
The gencat utility returns a 0 (zero) on successful completion; otherwise it returns a 1 and generates a diagnostic message. When gencat reports an error, it takes no action on any commands
and leaves an existing catalog unchanged.
RELATED INFORMATION
Commands: mkcatdefs(1).
STANDARDS CONFORMANCE
The following are Hewlett Packard Enterprise extensions to the XPG4 Version 2 specification:
•
4−6
The escape sequence \xdddd is supported for compatability with OSF/1.
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
genxlt(1)
NAME
genxlt - Generates code-set translation table
SYNOPSIS
genxlt [-f outputfile]
[inputfile]
FLAGS
-f outputfile
Specifies that the generated version of the code-set conversion table be placed in the
file specified by outputfile.
Operands
inputfile
Specifies the code-set conversion table source file.
DESCRIPTION
The genxlt command reads a source code-set conversion table file from inputfile and writes the
compiled version to outputfile.
If inputfile is not specified, standard input is used. If outputfile is not specified, standard output is
used. The source code-set conversion table provided to genxlt as input contains directives that
are acted upon by the utility to produce the compiled version.
The format of a code-set conversion table source file is:
•
An optional target_sub directive in the form: target_sub target [comment]
•
An optional source_sub directive in the form: source_sub source [comment]
•
Conversion entry lines must be in the form: source target [comment]
The source field must be hexadecimal numbers. The target field must be hexadecimal numbers
or the keyword is invalid. The comment field is optional. Lines whose initial non-space, non-tab
character is the # (number sign) are treated as comment lines. Null lines and lines consisting
only of white-space characters are also treated as comment lines.
The source, target, and comment fields can be separated by any combination of spaces and tabs.
Comments can contain these characters because anything after the second separator is considered a comment. The maximum value of source is 65535 decimal. The maximum value of
target is 4294967295 decimal. The hexadecimal representations of the values can be specified
by anything acceptable to the scanf() %x conversion specification, from 1 to 8 hexadecimal
digits. If asource value is found in the conversion table multiple times, the last entry is used in
the compilation of the conversion table. If a source value is greater than 0xff (255 decimal),
genxlt creates a conversion table for a double-byte input code set.
Include only valid and invalid conversions in the table. All values of source that are not present
in the first column of the table are considered to be valid for input but have no corresponding target value. Specific values of source that are invalid for input must be declared invalid by including them in the source column with the string invalid in the target column on the same line.
Valid input characters that have no corresponding target value are converted to the target value
specified by the target_sub directive. 0x1A, the ASCII SUB character, is the default if no
target_sub is specified. Conversions of valid input characters to the target_sub character by the
iconv() function are called non-identical conversions.
If the target_sub character has a corresponding character in the input code set, the source value
for that character can be specified by the source_sub directive. 0x1A, the ASCII SUB character,
is the default if no source_sub is specified. Specifying the source_sub character prevents
conversions of source_sub characters to the target_sub character from being counted by iconv()
527188-024
Hewlett Packard Enterprise
4−7
genxlt(1)
OSS Shell and Utilities Reference Manual
as non-identical conversions.
There is no requirement that the target_sub character for a conversion from a source code set to
a target code set be the source_sub character in a table that specifies the inverse conversion.
Comments can contain any characters, but it is recommended that only characters in the ASCII
code set be used. Using non-ASCII characters might cause genxlt to report an error if it finds
characters that are invalid in the current locale.
EXAMPLES
The following is an excerpt of a code set conversion table:
#source_sub
target_sub
0x0
0x1
0x001a
0x80
0x81
0x82
0x83
0x84
0x85
0x86
0xa1a1
0xa1a2
0xa1a3
0xa1a4
0x1a
0xffff
0x00
0x01
0x1A
0xc7
0xfc
0xe9
0xe2
0xe4
invalid
0x40
0xa2a3
0xa2a4
0xa2a5
0xa2a6
# SUB (default source_sub)
Replacement Character
NULL
SOH
SUB
C cedilla
u diaeresis
e acute
a circumflex
a diaeresis
not in use
a grave
special
special
special
special
In the preceding example, a comment serves only as a reminder that the default source_sub
value is 0x1a. The target_sub is explicitly specified. The input values 0x1a and 0x001a are the
same input value; input values can be padded with leading NULL bytes. The table indicates that
the input character corresponding to the source_sub character is translated to the character SUB
(0x1A), instead of to the target_sub character. It is not required that the source_sub character
be translated to the target_sub character.
Note that the source value 0x85 in the preceding example is specifically declared invalid in the
target column. Source values between 0x86 and 0xa1a1 are implicitly declared valid by their
omission from the table. The omitted characters are converted to the target_sub character.
The name of the file generated by the genxlt utility must adhere to the following naming convention for the iconv subsystem to recognize it as a conversion-table file:
fromcode: &quot;ISO8859-1-GL&quot;
tocode: &quot;ISO8859-1&quot;
conversion table file: &quot;ISO8859-1-GL_ISO8859-1&quot;
The code-set conversion table file name is formed by concatenating the to_code file name onto
the from_code file name, with an underscore character between the two.
Input code sets representable by the tables are restricted to single-byte and double-byte code sets.
It is not possible to represent a multibyte input code set, such as SJIS. Conversion of multibyte
input code sets to other code sets can be done by the iconv command only, using iconv converters.
4−8
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
genxlt(1)
DIAGNOSTICS
The following error messages have an exit value of 1:
Usage: genxlt [-f outputfile] [inputfile]
An unknown flag was detected at the command line.
genxlt: Unable to write to output file.
A failure to write to the output file occurred.
genxlt: Unable to open output file.
(file name): no such file or directory
A failure to open the output file occurred.
Failure to open the input file.
(file name): is a directory
A directory name is supplied as the input file.
The following error messages have an exit value of 2:
genxlt: Invalid format at line (line number)
The input file has an invalid format.
genxlt: There was no assignment for index (index number)
The input file is missing a source value.
EXIT VALUES
If successful, the genxlt utility exits with a value of 0 (zero). If unsuccessful, the genxlt utility
exits with a value greater than zero and writes an error message to the standard errror file.
RELATED INFORMATION
Commands: iconv(1).
Functions: iconv(3).
527188-024
Hewlett Packard Enterprise
4−9
getacl(1)
OSS Shell and Utilities Reference Manual
NAME
getacl - Lists access control lists (ACLs) for files
SYNOPSIS
getacl [ -ad ] file ...
FLAGS
-a
Displays the filename, owner, group, and any nondefault ACL entries for the file.
-d
Displays the filename, owner, group, and any default ACL entries for the file. Only
directories have default ACL entries.
If you do not specify any flags, the filename, owner, group, and both default and nondefault ACL
entries are displayed.
DESCRIPTION
The getacl command displays the owner, group, and ACL entries for each file that is a directory,
a regular file, a first-in, first-out (FIFO) special file, or a bound AF_UNIX socket.
When you specify multiple files, a blank line separates the ACL listing for each file. The format
of a single ACL is:
# file: filename
# owner: uid
# group: gid
user::perm
user:uid:perm
group::perm
group:gid:perm
class:perm
other:perm
default:user::perm
default:user:uid:perm
default:group::perm
default:group:gid:perm
default:class:perm
default:other:perm
The first three lines show the filename, the file owner, and the file-owning group. When you
specify only the -d flag, and the file has no default ACL, only these three lines are displayed.
Only directories have default ACL entries.
The user entry without a user ID indicates the permissions that are granted to the owner of the
file. One or more additional user entries indicate the permissions that are granted to the specified
users. The group entry without a group identifier indicates the permissions that are granted to
the owning group of the file. One or more additional group entries indicate the permissions that
are granted to the specified groups. The other entry indicates the permissions that are granted to
others. The class entry provides a mask that you can use to restrict the permissions granted by
additional user entries and any group entries.
The default entries (default:user, default:group, and default:other) can exist for directories
only and contain ACL entries that are added to files and directories created within the directory.
Default entries are added to new files as actual entries. Default entries are added to new directories both as actual entries and default entries.
The uid is the login name, gid is a group name, and perm is a three-character string of letters
representing the separate discretionary access rights: r (read), w (write), x (execute/search), or
the placeholder character - (dash). The value of perm is displayed in the order rwx. If a permission is not granted by an ACL entry, the placeholder character appears.
4−10
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
getacl(1)
The getacl command displays ACL entries in the order in which the entries are evaluated when
an access check is performed. Any default ACL entries for a directory have no effect on access
checks.
The file owner (user::) permission bits represent the access that the owner of the file has. The file
class permission bits represent the most access that any additional user entry, additional group
entry, or the owning group entry can grant. The file other permission bits represent the access
that the other ACL entry has. If a user invokes the chmod command or the setacl command and
changes the file class permission bits, the access granted by the additional ACL entries might be
restricted. For detailed information about ACLs, see the acl(5) reference page.
To indicate that the file group class permission bits restrict an ACL entry, getacl displays, after
each affected entry, text in the form #effective:perm, where perm shows only the permissions
actually granted.
EXAMPLES
Given file filea, with an ACL six entries long, the command getacl filea displays:
# file: filea
# owner: fletcher
# group: us
user::rwx
user:spy:--user:archer:rwgroup::r-class:rwother:--Given file filea, with an ACL six entries long, after the command chmod 700 filea was issued,
the command getacl filea displays:
# file: filea
# owner: fletcher
# group: us
user::rwx
user:spy:--user:archer:rw- #effective:--group::r-- #effective:--class:--other:--Given directory fileb, with an ACL containing default entries, the command getacl -d fileb
displays:
# file: fileb
# owner: fletcher
# group: us
default:user::rwx
default:user:spy:--default:group::r-default:other:--Given directory fileb, the command getacl fileb displays:
# file: fileb
# owner: fletcher
# group: us
user::rwx
527188-024
Hewlett Packard Enterprise
4−11
getacl(1)
OSS Shell and Utilities Reference Manual
user:spy:--user:archer:rwgroup::r-other:--default:user::rwx
default:user:spy:--default:group::r
NOTES
The output of the getacl command is in the correct format for input to the setacl command. If
you direct the output from getacl to a file, you can use this file as input to setacl, allowing you to
easily assign the ACL of one file to another file.
RELATED INFORMATION
Commands: chmod(1), ls(1), setacl(1).
Functions: acl(2), aclsort(3), getgrid(3), getpwuid(3).
Miscellaneous topics: acl(5).
STANDARDS CONFORMANCE
This command is an Hewlett Packard Enterprise extension to the XPG4 Version 2 specification.
4−12
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
getconf(1)
NAME
getconf - Displays system configuration variable values
SYNOPSIS
getconf system_configuration
getconf path_configuration pathname
DESCRIPTION
The system_configuration argument specifies a system-wide configuration variable. The
path_configuration argument specifies a system path-configuration variable. The pathname
argument specifies a pathname for the path_configuration variable.
The system_configuration argument specifies system-configuration variables whose values are
valid throughout the system. There are two kinds of system-wide configuration values:
•
System-wide configuration variables
•
System standards configuration variables
The path_configuration argument specifies system path-configuration variables whose values
contain information about paths and the path structure in the system.
System-Wide Configuration Variables
System-wide configuration variables contain the minimum values met throughout all portions of
the system. The following list defines the system-wide configuration variables used with the
getconf command:
ARG_MAX
The maximum length, in bytes, of the arguments for one of the exec functions, including environment data. atexit() per process.
BC_BASE_MAX
The maximum value allowed for the obase variable with the bc command.
BC_DIM_MAX
The maximum number of elements permitted in an array by the bc command.
BC_SCALE_MAX
The maximum value allowed for the scale variable with the bc command.
BC_STRING_MAX
The maximum length of string constants accepted by the bc command.
CHILD_MAX
The maximum number of simultaneous processes for each real user ID.
CLK_TCK
The number of clock ticks per second. The value of CLK_TCK may be variable, and
it should not be assumed that CLK_TCK is a compile-time constant.
COLL_WEIGHTS_MAX
The maximum number of weights that can be assigned to an entry in the
LC_COLLATE locale-dependent information in a locale-definition file.
CS_PATH
A value for the PATH environment variable that finds all standard utilities.
527188-024
Hewlett Packard Enterprise
4−13
getconf(1)
OSS Shell and Utilities Reference Manual
EXPR_NEST_MAX
The maximum number of expressions that can be nested within parentheses by the
expr command.
LINE_MAX
The maximum length, in bytes, of a command’s input line (either standard input or
another file) when the utility is described as processing text files. The length includes
room for the trailing newline character.
NGROUPS_MAX
The maximum number of simultaneous supplementary group IDs for each process.
OPEN_MAX
The maximum number of files that one process can have open at one time.
PAGE_SIZE
The page size granularity for memory regions.
PASS_MAX
The maximum number of characters returned by getpass() (not including terminating
null).
PATH
A value for the PATH environment variable that finds all standard utilities.
RE_DUP_MAX
The maximum number of repeated occurrences of a regular expression permitted when
using the interval-notation parameters, such as the m and n parameters, with the ed
command.
STREAM_MAX
The number of streams that one process can have open at one time.
TZNAME_MAX
The maximum number of bytes supported for the name of a time zone (not the length of
the TZ environmental variable).
System Standards Configuration Variables
System standards configuration variables contain the minimum values required by a particular
system standard. The prefixes POSIX_, POSIX2_, and XOPEN indicate that the variable contains the minimum value for a system characteristic required by the POSIX 1003.1, POSIX
1003.2, and X/Open system standards, respectively. System standards are system-wide
minimums that the system meets to support the particular system standard. Actual configuration
values may exceed these standards. The system standards configuration variables for the getconf
command are defined as follows:
POSIX_ARG_MAX
The length of the arguments for one of the exec functions, in bytes, including environment data.
POSIX_CHILD_MAX
The maximum number of simultaneous processes for each real user ID.
POSIX_JOB_CONTROL
This variable has a value of 1 if the system supports job control; otherwise, the variable
is undefined.
4−14
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
getconf(1)
POSIX_LINK_MAX
The maximum value of a file’s link count.
POSIX_LOCALEDEF
This variable has a value of 1 if the system restricts supported locales to only those it
supplies; otherwise, the variable has a value of 0 (zero).
POSIX_MAX_CANON
The maximum number of bytes in a terminal canonical input queue.
POSIX_MAX_INPUT
The maximum number of bytes for which space will be available in a terminal input
queue.
POSIX_NAME_MAX
The maximum number of bytes in a filename.
POSIX_NGROUPS_MAX
The maximum number of simultaneous supplementary group IDs for each process.
POSIX_OPEN_MAX
The maximum number of files that one process can have open at one time.
POSIX_PATH_MAX
The maximum number of bytes in a pathname.
POSIX_PIPE_BUF
The maximum number of bytes that can be written atomically when writing to a pipe.
_POSIX_REENTRANT_FUNCTIONS
This variable has a value of 1 if the system supports POSIX reentrant functions; otherwise, the variable is undefined.
POSIX_SAVED_IDS
This variable has a value of 1 if each process has a saved set-user-ID and a saved setgroup-ID; otherwise, the variable is undefined.
POSIX_SSIZE_MAX
The maximum value that can be stored in an object of type ssize_t.
POSIX_STREAM_MAX
The number of streams that one process can have open at one time.
_POSIX_THREAD_ATTR_STACKSIZE
This variable has a value of 1 if the system supports the POSIX threads stack size attribute; otherwise, the variable is undefined.
_POSIX_THREADS
This variable has a value of 1 if the system supports POSIX threads; otherwise, the
variable is undefined.
POSIX_TZNAME_MAX
The maximum number of bytes supported for the name of a time zone (not the length of
the TZ environmental variable).
527188-024
Hewlett Packard Enterprise
4−15
getconf(1)
OSS Shell and Utilities Reference Manual
POSIX_VERSION
The date of approval of the most current version of the POSIX 1 standard that the system supports. The date is a 6-digit number, with the first 4 digits signifying the year and
the last 2 digits the month. Different versions of the POSIX 1 standard are periodically
approved by the IEEE Standards Board, and the date of approval is used to distinguish
between different versions.
POSIX2_BC_BASE_MAX
The maximum value allowed for the obase variable with the bc command.
POSIX2_BC_DIM_MAX
The maximum number of elements permitted in an array by the bc command.
POSIX2_BC_SCALE_MAX
The maximum value allowed for the scale variable with the bc command.
POSIX2_BC_STRING_MAX
The maximum length string constants accepted by the bc command.
POSIX2_CHAR_TERM
One or more terminal types capable of all operations described in ISO/IEC 9945. This
value need not be present on a system not supporting the User Portability Utilities
Option.
POSIX2_COLL_WEIGHTS_MAX
The maximum number of weights that can be assigned to an entry of the
LC_COLLATE locale variable in a locale-definition file.
POSIX2_EXPR_NEST_MAX
The maximum number of expressions that can be nested within parentheses by the
expr command.
POSIX2_LINE_MAX
The maximum length, in bytes, of a command’s input line (either standard input or
another file) when the utility is described as processing text files. The length includes
room for the trailing newline character.
POSIX2_RE_DUP_MAX
The maximum number of repeated occurrences of a regular expression permitted when
using the interval-notation parameters, such as the m and n parameters with the ed
command.
POSIX2_UPE
This variable has a value of 1 if the system supports the User Portability Utilities
Option; otherwise, the variable has a value of 0 (zero).
POSIX2_VERSION
The date of approval of the most current version of the POSIX 2 standard that the system supports. The date is a 6-digit number, with the first 4 digits signifying the year and
the last 2 digits the month. Different versions of the POSIX 2 standard are periodically
approved by the IEEE Standards Board, and the date of approval is used to distinguish
between different versions.
4−16
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
getconf(1)
POSIX2_C_BIND
This variable has a value of 1 if the system supports the optional C Language Development Facilities specified by POSIX 2 and the optional C Language Bindings Option
from POSIX 2; otherwise, the variable is undefined.
POSIX2_C_DEV
This variable has a value of 1 if the system supports the optional C Language Development Utilities from POSIX 2; otherwise, the variable is undefined.
POSIX2_C_VERSION
The integer value 199209L. This value indicates the version of the interfaces
described in the C-Language Bindings Option section of the XPG4 standard. This
value changes with each published version of ISO/IEC 9945 to indicate the 4-digit year
and 2-digit month that the standard was approved by the IEEE Standards Board.
POSIX2_FORT_DEV
This variable has a value of 1 if the system supports the FORTRAN Development Utilities Option from POSIX 2; otherwise, the variable is undefined.
POSIX2_FORT_RUN
This variable has a value of 1 if the system supports the FORTRAN Runtime Utilities
Option from POSIX 2; otherwise, the variable is undefined.
POSIX2_LOCALEDEF
This variable has a value of 1 if the system supports the creation of new locales with
the localedef command; otherwise, the variable is undefined.
POSIX2_SW_DEV
This variable has a value of 1 if the system supports the Software Development Utilities Option from POSIX 2; otherwise, the variable is undefined.
SSIZE_MAX
The maximum value that can be stored in an object of type ssize_t.
XOPEN_VERSION
An integer indicating the most current version of the X/OPEN standard that the system
supports.
System Path Configuration Variables
LINK_MAX
The maximum value of a file’s link count. If the pathname argument refers to a directory, the value returned applies to the directory itself.
MAX_CANON
The maximum number of bytes in a terminal canonical input queue. If the pathname
argument does not specify a terminal file, the getconf command exits with a nonzero
value.
MAX_INPUT
The maximum number of bytes for which space will be available in a terminal input
queue. If the pathname argument does not specify a terminal file, the getconf command
exits with a nonzero value.
527188-024
Hewlett Packard Enterprise
4−17
getconf(1)
OSS Shell and Utilities Reference Manual
NAME_MAX
The maximum number of bytes in a filename. If the pathname argument specifies a
directory, the value returned applies to the filenames within the directory.
PATH_MAX
The maximum number of bytes in a pathname. If the pathname argument specifies a
directory, the value returned is the maximum length of a relative pathname when the
specified directory is the working directory.
PIPE_BUF
The maximum number of bytes that can be written atomically when writing to a pipe. If
the pathname argument specifies a FIFO or a pipe, the value returned applies to that
object. If the pathname argument specifies a directory, the value returned applies to
any FIFO created in that directory. If the pathname argument does not specify a directory or a FIFO file, the getconf command exits with a nonzero value.
POSIX_CHOWN_RESTRICTED
This variable has a value of 1 when the use of the chown function is restricted to a process with appropriate privileges and the group ID of a file can only be changed to the
effective group ID of the process or to one of its supplementary group IDs. If the variable is undefined, it varies in the system, depending upon the path.
POSIX_NO_TRUNC
This variable has a value of 1 when pathnames longer than the limit specified by the
NAME_MAX variable will generate an error. If the variable is undefined, it varies in
the system, depending upon the path.
POSIX_VDISABLE
When this variable has a value of 1, terminal special characters, which are defined in
the termios.h header file, can be disabled. If the pathname argument does not specify
a terminal file, the getconf command will exit with a nonzero value.
EXAMPLES
1.
To display the value of the ARG_MAX environment variable, enter:
getconf ARG_MAX
2.
To display the value of the PATH_MAX environment variable for the /usr directory and
check the exit codes for the command, enter the following sequence of shell commands:
value=$ (getconf PATH_MAX /usr)
status=$?
if [ &quot;X$value&quot; = &quot;x&quot; ]
then
case $status in
0)
echo PATH_MAX is NULL; ;
1)
echo PATH_MAX in /usr not defined; assume infinity; ;
*)
echo Error in the getconf command; ;
esac
else
echo The value of PATH_MAX in /usr is $value
fi
This sequence returns the following message:
The value of PATH_MAX in /usr is 1024
4−18
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
getconf(1)
FILES
/usr/include/limits.h
Defines system configuration variables.
/usr/include/unistd.h
Defines system configuration variables.
RELATED INFORMATION
Commands: env(1).
Functions: confstr(3), pathconf(3), sysconf(3).
Files: limits(4).
527188-024
Hewlett Packard Enterprise
4−19
getfilepriv(1)
OSS Shell and Utilities Reference Manual
NAME
getfilepriv - Displays file privileges for an executable file
SYNOPSIS
getfilepriv file ...
FLAGS
Operands
file
Specifies the name of a file for which you want to display privileges.
DESCRIPTION
The getfilepriv command displays the file privileges for the specified file. This file can be either
a Guardian file or an OSS file.
For a description of the values for file privileges, see the setfilepriv(1) reference page.
EXAMPLES
1.
To list the privileges for file /user/privexe, enter:
getfilepriv /user/priexe
Sample output:
#file: /usr/privexe
PRIVSETID
2.
To list the privileges for the Guardian file $system.system.privobj,
enter:
getfilepriv /G/SYSTEM/SYSTEM/PRIVOBJ
Sample output:
#file: /G/SYSTEM/SYSTEM/PRIVOBJ
PRIVSETID
PRIVSOARFOPEN
3.
To list the privileges for all the files in the current directory, enter:
getfilepriv *
Sample output:
#file: exe1_with_privs
PRIVSETID
PRIVSOARFOPEN
#file: exe2_no_priv
NONE
#file: exe2_with_priv
PRIVSETID
#file: not_executable
NONE
#file: exe3_with_priv
PRIVSETID
4−20
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
getfilepriv(1)
NOTES
You can use the output of the getfilepriv command used on a single file, saved as a file, as the
priv_file for the setprivfile command. Lines that begin with # (number sign) in the output of the
getfilepriv command are treated as comments in the input of the setfilepriv command.
This command is supported on systems running J06.11 or later J-series RVUs or H06.22 or later
H-series RVUs only.
RELATED INFORMATION
Commands: setfilepriv(1).
Functions: setfilepriv(2), stat(2).
STANDARDS CONFORMANCE
This command is an Hewlett Packard Enterprise extension.
527188-024
Hewlett Packard Enterprise
4−21
getopts(1)
OSS Shell and Utilities Reference Manual
NAME
getopts - Parses command options
SYNOPSIS
getopts optstring name [argument ...]
DESCRIPTION
The getopts command checks a specified command for legal options.
Operands
optstring
Specifies the letters that the getopts command will recognize as
valid option values when parsing the command options. If a
letter is followed by a : (colon), the option is expected to have
an argument specified in argument. The options can be
separated from the argument by spaces.
name
Specifies the name of a shell environment variable into which
the getopts command should place the value of the next option.
argument
Specifies an option argument for the getopts command to parse.
If argument is omitted, positional parameters are parsed.
An option argument begins with a + (plus sign) or a - (dash).
Either an option not beginning with + or - or the argument -ends the options.
Each time it is invoked, getopts places the next option letter it
finds into the variable name. The value stored has a + added in
front when argument begins with a +.
The index of the next argument is stored in OPTIND. OPTIND
is initialized to 1 when the shell is invoked.
The option argument, if any, gets stored in OPTARG.
If a required option argument is missing, a leading : in optstring
causes getopts to store the letter of an invalid option in
OPTARG and to set name to : (colon). Otherwise, name is set
to a ? (question mark), the shell variable OPTARG is not set,
and getopts prints an error message. The exit status remains 0
(zero).
The exit status is nonzero when there are no more options.
Environment Variables
This command supports the use of the LANG, LC_ALL, LC_CTYPE, LC_MESSAGES,
NLSPATH, OPTARG, and OPTIND environment variables.
EXAMPLES
The following section from a shell script takes the command line passed from the invoking process and extracts the flag characters. There are two expected flags: the -a flag and the -b flag.
The -b flag requires an argument. At the end, the script echoes the remaining arguments not
extracted by the getopts command.
aflag=
bflag=
while getopts ab: name
do
case $name in
4−22
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
a)
getopts(1)
aflag=1
b)
bflag=1
bval-&quot;$OPTARG&quot;;;
?)
echo Usage: $0 [-a] [-b value] parameters
exit 2;;
esac
done
if [ ! -z &quot;$bflag&quot; ]; then echo Option -a specified; fi
if [ ! -z &quot;$bflag&quot; ]; then echo Option -b &quot;bval&quot; specified; fi
shift $[OPTIND - 1]
echo Remaining parameters are: &quot;$*&quot;
NOTES
The getopts command is a shell built-in command. It differs from the regular commands in that it
does not open a new shell process when it executes.
A general discussion of shell built-in commands and a list of the OSS shell built-in commands
are in the sh(1) reference page.
EXIT VALUES
The getopts command returns the following values:
0 (zero)
The command completed successfully.
&gt;0
An error occurred or there are no more options.
RELATED INFORMATION
Commands: sh(1).
STANDARDS CONFORMANCE
This command conforms to the XPG4 Version 2 specification with extensions.
527188-024
Hewlett Packard Enterprise
4−23
gname(1)
OSS Shell and Utilities Reference Manual
NAME
gname - Displays the Guardian environment filename for an OSS file
SYNOPSIS
gname [-s] pathname ...
FLAGS
-s
Supresses formatting and displays only the Guardian filename.
DESCRIPTION
The gname command displays the Guardian filename for the file specified by pathname.
Operands
pathname
Specifies the OSS pathname for the file whose Guardian filename is to
be displayed.
EXAMPLES
1.
The command:
gname /bin/gname
results in output such as the following:
gname: /bin/gname ---&gt; \KT22.$XPG.ZYQ00000.Z00005LS
2.
The command:
gname -s /bin/pname
results in output such as the following:
\KT22.$XPG.ZYQ00000.Z00005LN
DIAGNOSTICS
The following error messages can be returned:
A prefix within the pathname refers to a file other than the dir
The value specified for pathname specifies a file where a directory name is required.
Failed with Guardian error: 4002
The value specified for pathname does not correspond to a
known file.
Invalid pathname specified: pathname
The value specified for pathname contains a character that is not
permitted in a pathname.
Pathname or name component too long.
Either a component of the value specified for pathname exceeds
the maximum number of characters allowed in that component,
or symbolic links in the specified pathname expand until the
maximum length for a valid pathname is exceeded.
4−24
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
gname(1)
Root fileset not mounted.
The value specified for pathname uses a root fileset that is not
currently mounted. If the specified value is valid, contact your
site administrator to have that root fileset mounted.
Some non-root fileset not mounted.
The value specified for pathname uses a directory for a fileset
that is not currently mounted. If the specified value is valid,
contact your site administrator to have that fileset mounted.
EXIT VALUES
The gname command returns the following exit values:
0 (zero)
The command completed successfully.
&gt;0
An error occurred.
RELATED INFORMATION
Commands: pname(1).
Miscellaneous: filename(5).
STANDARDS CONFORMANCE
This command is an extension to the XPG4 Version 2 specification.
527188-024
Hewlett Packard Enterprise
4−25
grep(1)
OSS Shell and Utilities Reference Manual
NAME
grep - Search a file for a pattern
SYNOPSIS
grep [-E | -F] [-c | -l | -q] [-bhinsvwxy] [-pparagraph_separator ...]
{pattern ... | -e pattern ... | -f pattern_file ...} [file ... ]
FLAGS
While most flags can be combined, some combinations result in one flag overriding another. For
example, if you specify the -n and -l flags, the output includes filenames only (as specified by the
-l flag) and thus does not include line numbers (as specified by the -n flag).
-b
Precedes each line by the block number in which it was found. Use
this flag to help find disk block numbers by context.
-c
Displays only a count of matching lines.
-e pattern ...
Specifies a pattern. This flag works the same as a simple pattern but is
useful when the pattern begins with a - (dash).
-E
Uses extended regular expressions (EREs) to match patterns (treats
each pattern as an ERE). A null ERE matches every line.
-f pattern_file ...
Specifies a file that contains patterns. Each pattern terminates with a
newline character.
-F
Uses fixed strings to match patterns (treats each pattern as a literal
string instead of as a regular expression). A null string matches every
line.
-h
Suppresses reporting of filenames when multiple files are processed.
-i
Ignores the case of letters in locating pattern; that is, uppercase and
lowercase letters in the input are considered identical (same as the -y
flag).
-l
Lists the name of each file with lines matching pattern. Each filename
is listed only once; filenames are separated by newline characters.
-n
Precedes each line with its relative line number in the file.
-pparagraph_separator ...
Displays the entire paragraph containing matched lines. Paragraphs
are delimited by paragraph separators specified by
paragraph_separator, which is a BRE pattern. Lines containing the
paragraph separators are used only as separators; they are never
included in the output. The default paragraph separator is a blank line.
No space is permitted between the flag and the paragraph separator.
-q
4−26
Suppresses all output except error messages. This is useful for easily
determining whether or not a pattern or string exists in a group of files.
When searching several files, it provides a performance improvement
because it can quit as soon as it finds the first match, and it requires
less care by the user in choosing the set of files to supply as arguments
because it exits with a 0 (zero) exit status if it detects a match, even if
the grep command detected an access or read error on earlier file
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
grep(1)
arguments.
-s
Suppresses error messages about inaccessible files.
-v
Displays all lines except those that match the specified pattern. This
flag is useful for filtering unwanted lines out of a file.
-w
Searches for the expression as a word (the pattern bracketed by nonalphanumeric characters or by the beginning or end of the line). See the
reference page for the ex command.
-x
Displays lines that match the pattern exactly with no additional characters.
-y
Ignores the case of letters in locating pattern; that is, uppercase and
lowercase letters in the input are considered to be identical (same as
the -i flag).
DESCRIPTION
The grep command searches the specified files (the standard input file by default) for lines containing characters that match the specified pattern and then write matching lines to standard output.
The grep command searches for patterns that are limited regular expressions as described under
Regular Expressions (REs).
Command Usage
The grep command precedes the matched line with the name of the file containing it if you
specify more than one file (except when the -h flag is specified).
Lines are limited to 2048 bytes; longer lines are broken into multiple lines of 2048 or fewer
bytes. Paragraphs (under the -p flag) are currently limited to a length of 5000 bytes.
Running the grep command on a nontext file (for example, an .o file) produces unpredictable
results and is discouraged.
Regular Expressions (REs)
Regular expressions (REs) cannot contain newline characters, because these signal a new pattern. The following REs match a single character:
character
An ordinary character (one other than one of the special patternmatching characters) matches itself.
.
A . (dot) matches any single character except the newline character.
[string] A string enclosed in [ ] (brackets) matches any one character in that
string. In addition, certain pattern-matching characters have special
meanings within brackets:
527188-024
^
If the first character of string is a ˆ (circumflex), the RE
[ˆstring] matches any character except the characters in
string and the newline character. A ˆ has this special meaning only if it occurs first in the string.
-
You can use a - (dash) to indicate a range of consecutive
characters. The characters that fall within a range are determined by the current collating sequence, which is defined by
the LC_COLLATE environment variable. For example, [ad] is equivalent to [abcd] in the traditional ASCII collating
Hewlett Packard Enterprise
4−27
grep(1)
OSS Shell and Utilities Reference Manual
sequence.
A range can include a multicharacter collating element
enclosed within bracket-period delimiters ([. .]). The
bracket-period delimiters in the RE syntax distinguish multicharacter collating elements from a list of the individual
characters that make up the element.
A collating sequence can define equivalence classes for
characters. An equivalence class is a set of collating elements that all sort to the same primary location. They are
enclosed within bracket-equal delimiters ([= =]). An
equivalence class generally is designed to deal with
primary-secondary sorting. For example, if e, &egrave;, and &ecirc;
belong to the same equivalence class, then [[=e=]fg,
[[=&egrave;=]fg], and [[=&ecirc;=]fg] are each equivalent to [e&egrave;&ecirc;fg].
The - (dash) character loses its special meaning if it occurs
first ([-string]), if it immediately follows an initial circumflex
([ˆ-string]), or if it appears last ([string-]) in the string.
]
When the ] (right bracket) is the first character in the string
([]string]) or when it immediately follows an initial
circumflex ([ˆ]string]), it is treated as a part of the string
rather than as the string terminator.
\special_character
A \ (backslash) followed by a special pattern-matching character
matches the special character itself (as a literal character). These special pattern-matching characters are as follows:
[: :]
.*[\
Always special, except when they appear within [ ] (brackets).
^
Special at the beginning of an entire pattern or when it
immediately follows the left bracket of a pair of brackets
([ˆ...]).
$
Special at the end of an entire pattern.
A character class name enclosed in bracket-colon delimiters matches
any of the set of characters in the named class. Members of each of the
sets are determined by the current setting of the LC_CTYPE environment variable. The supported classes are alpha, upper, lower, digit,
xdigit, space, print, punct, graph, and cntrl.
Here is an example of how to specify one of these classes:
[[:lower:]]
This matches any lowercase character for the current locale.
Forming Patterns
The following rules describe how to form patterns from REs:
•
4−28
An RE that consists of a single, ordinary character matches that same
character in a string.
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
grep(1)
•
An RE followed by an * (asterisk) matches zero or more occurrences of
the character that the RE matches. For example, the following pattern:
ab*cd
matches each of the following strings:
acd
abcd
abbcd
abbbcd
but not the following string:
abd
If there is any choice, the longest matching leftmost string is chosen. For
example, given the following string:
122333444
the pattern .* matches 122333444, the pattern .*3 matches 122333, and
the pattern .*2 matches 122.
•
An RE followed by:
\{number\}
Matches exactly number occurrences of the character matched
by the RE.
\{number,\}
Matches at least number occurrences of the character matched
by the RE.
\{number1,number2\}
Matches any number of occurrences of the character matched
by the RE from number1 to number2, inclusive.
The values of number1 and number2 must be integers in the
range 0 through 255, inclusive. Whenever a choice exists, this
pattern matches as many occurrences as possible.
Note that if number is 0 (zero), pattern matches zero
occurrences of pattern; for example:
$ echo abc | grep ’aX\{0\}bX\{0\}cX\{0\}’
abc
$
527188-024
•
You can combine REs into patterns that match strings containing the
same sequence of characters. For example, AB*CD matches the string
ABCD and [A-Za-z]*[0-9]* matches any string that contains any combination of ASCII alphabetic characters (including none), followed by any
combination of numerals (including none).
•
The character sequence \(pattern\) matches pattern and saves it into a
numbered holding space. Using this sequence, up to nine patterns can be
saved on a line. Counting from left to right on the line, the first pattern
saved is placed in the first holding space, the second pattern is placed in
the second holding space, and so on.
Hewlett Packard Enterprise
4−29
grep(1)
OSS Shell and Utilities Reference Manual
The character sequence \n matches the nth saved pattern, which is
placed in the nth holding space. (The value of n is a digit, 1-9.) Thus,
the following pattern:
\(A\)\(B\)C\2\1
matches the string ABCBA. You can nest patterns to be saved in holding spaces. Whether the enclosed patterns are nested or in a series, \n
refers to the nth occurrence, counting from the left, of the delimiting
characters, \).
Restricting What Patterns Match
A pattern can be restricted to match from the beginning of a line, up to the end of the line, or the
entire line:
•
A ˆ (circumflex) at the beginning of a pattern causes the pattern to match
only a string that begins in the first character position on a line.
•
A $ (dollar sign) at the end of a pattern causes that pattern to match only
if the last matched character is the last character (not including the newline character) on a line.
•
The construction ˆpattern$ restricts the pattern to matching only an
entire line.
EXAMPLES
1.
To search several files for a string of characters, enter:
grep -F ’strcpy’ *.c
This command searches for the string strcpy in all files in the current
directory with names ending in .c.
2.
To count the number of lines that match a pattern, enter:
grep -c -F ’{’ pgm.c
grep -c -F ’}’ pgm.c
This command displays the number of lines in pgm.c that contain left
and right braces.
If you do not put more than one { or } on a line in your C programs, and
if the braces are properly balanced, then the two numbers displayed will
be the same. If the numbers are not the same, then you can display the
lines that contain braces in the order that they occur in the file with the
command:
grep -n -E ’{}’ pgm.c
3.
To display all lines in a file that begin with an ASCII letter, enter:
grep ’ˆ[a-zA-Z]’ pgm.s
Note that because the command grep -F searches only for fixed strings
and does not interpret pattern-matching characters, the following command searches only for the literal string ˆ[a-zA-Z] in file pgm.s:
grep -F ’ˆ[a-zA-Z]’ pgm.s
A space character is required between the -F flag and the literal string
specification.
4−30
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
grep(1)
4.
To display all lines that contain ASCII letters in parentheses or digits in
parentheses (with spaces optionally preceding and following the letters
or digits), but not letter-digit combinations in parentheses, enter:
grep -E \
’\( *([a-zA-Z]*⏐
⏐[0-9]*) *\)’ my.txt
This command displays lines file in my.txt such as (y) or ( 783902), but
not (alpha19c).
Note that with the command grep -E, \( and \) match parentheses in the
text and ( and ) are special characters that group parts of the pattern.
With the grep command without the -E flag, the reverse is true; use (
and ) to match parentheses and \( and \) to group characters.
5.
To display all lines that do not match a pattern, enter:
grep -v ’ˆ#’
This displays all lines that do not begin with a # (number sign).
6.
To display the names of files that contain a pattern, enter:
grep -l -F ’rose’ *.list
This command searches the files in the current directory whose names
end with .list and displays the names of those files that contain at least
one line containing the string rose.
A space character is required between the -F flag and the literal string
specification.
7.
To display all lines that contain uppercase characters, enter:
grep ’[[:upper:]]’ pgm.s
EXIT VALUES
The exit values of the grep command are as follows:
0
A match was found.
1
No match was found.
2
A syntax error was found or a file was inaccessible, even if matches
were found.
RELATED INFORMATION
Commands: ed(1), sed(1), sh(1).
Files: locale(4).
527188-024
Hewlett Packard Enterprise
4−31
gtacl(1)
OSS Shell and Utilities Reference Manual
NAME
gtacl - Runs a process in the Guardian environment from the OSS environment
SYNOPSIS
gtacl [ option ... ] [ operands ]
FLAGS
Operands used with the gtacl command must follow gtacl option specifications.
Options
All filename and pathname arguments used with gtacl options must be specified using OSS pathname syntax. In the current release, filenames and pathnames within the /E directory are not supported by the OSS file system. These specifications allow the user to identify Guardian environment objects on other Hewlett Packard Enterprise nodes.
The specification of options ends when gtacl finds one of the following:
•
The end of the input line
•
Any operand; that is, any specification that does not start with a minus
(-) or plus (+) and is not a redirection specification
•
-- option
•
-p option
Options cannot be grouped after a single minus (-) or plus (+). That is, -debugnowait is not a valid option specification.
The gtacl options can be specified in any order; gtacl processes options from left
to right. When you specify a gtacl option more than once, the rightmost
specification on the command line determines the value used.
-? | -help
Displays usage information for the gtacl command. If this
option is specified, all other gtacl options and operands on the
command line are ignored.
-c command | -cv command
Submits command to the child process through the Guardian
environment STDIN file of the child process.
The command string must conform to OSS /bin/sh quoting conventions. Refer to the sh(1) reference page for a description of
those conventions.
When you specify the -c command option, gtacl suppresses all
input and output operations except for those that occur after
command is read and before the end-of-file (EOF) indication is
returned. Use this option when you do not want Guardian program banner information or similar output that is not data generated by running command.
When you specify the -cv command option, gtacl displays all
output, regardless of whether it occurs after command is read
and before the end-of-file (EOF) indication is returned. Use this
option when you do not want to discard Guardian program
banner information or similar output that is not data generated
by running command.
If you specify either of these options, the OSS environment standard input file for gtacl is not connected to the Guardian
4−32
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
gtacl(1)
environment standard input file of the child process. Refer to
Input/Output Filtering under NOTES later in this reference
page for more information.
The -c and -i options, and the -c and +i options are mutually
exclusive. When they are specified on the command line, the last
option specified takes effect.
-cpu n
Specifies the processor (0-15) in which the child process is to
run.
The default processor is the processor in which gtacl is running,
unless the child process is being created on another Hewlett
Packard Enterprise node. When the child process runs on
another Hewlett Packard Enterprise node, the operating system
on that node assigns the default processor.
-debug
Enters a Guardian environment debugging tool at the first executable instruction of the child process. The default action is to
start the child process without a debugging tool active.
Refer to the manual for the debugger in use for additional information.
-defmode on | -defmode off
Specifies the Guardian DEFINE mode for the child process.
If you use -defmode on, all Guardian DEFINE values of the process executing gtacl are inherited by the child process.
If you use -defmode off, only Guardian =_DEFAULTS DEFINE
values are inherited by the child process.
The default mode is the DEFINE mode in effect for gtacl.
Refer to the TACL Reference Manual for additional information
about Guardian DEFINEs.
-extswap pathname
Specifies a Guardian swap file or swap volume for the extended
data segment of the child process. (Used for G-series TNS or
accelerated child processes only.) The pathname must be
specified in OSS pathname syntax.
The default action is to use the swap volume specified in the
=_DEFAULTS DEFINE for the child process. If that volume is
not available, the operating system chooses a swap volume.
Refer to the Guardian Programmer’s Guide for additional information about swap files.
-f pathname
Specifies a text file containing the environment variables to be
passed to the TACL process as PARAMs.
The environment variables must be listed in name=value format,
with each pair on a new line; white space is ignored before the
equal sign. Variable definitions that follow this format are
passed, one PARAM for each definition, to the Guardian TACL
process. Environment variable definitions that do not follow this
format are ignored.
If the -f flag is omitted, gtacl attempts to pass all existing
527188-024
Hewlett Packard Enterprise
4−33
gtacl(1)
OSS Shell and Utilities Reference Manual
environment variables unless the -s flag is used. If both the -f
and -s flags are specified, the -f option is ignored. If the -f flag is
specified more than once, only the rightmost specification in the
command line is used.
-gpri n
Assigns the initial Guardian execution priority n (1-199) to the
child process. The value 1 is the lowest priority; the value 199
is the highest priority.
The default priority is the priority used for gtacl.
-highpin on | -highpin off
Specifies whether the child process can run with a Guardian process identification number (PIN) greater than 255.
Specifying -highpin on means that the child process can run
with a PIN greater than 255. Specifying -highpin off means the
child process must run with a PIN between 0 and 254.
The default value is -highpin on, unless an OFF value for the
Guardian process attribute is inherited from gtacl.
Refer to the TACL Reference Manual for additional information
about high and low PINs.
-i
Specifies that gtacl should do the following:
•
Send the child process the gtacl Guardian process name
qualifier to use as both its Guardian environment IN and
OUT filenames. (Many Guardian processes operate in
an interactive mode when their Guardian environment
IN and OUT filenames are the same.)
•
Attempt to filter data passing through all OSS environment standard input, output, and error files. Refer to
Input/Output Filtering under NOTES later in this
reference page for more information.
The default action is to filter only the standard input and output
files that are connected to an OSS regular file, device file, pipe,
or FIFO that cannot be accessed through a Guardian environment filename.
The -c and -i options, and the -c and +i options are mutually
exclusive. When they are specified on the command line, the last
option specified takes effect.
+i
Specifies that gtacl should do the following:
•
4−34
Send the child process different Guardian process name
qualifiers for the Guardian environment IN and OUT
filenames. (Many Guardian processes operate in a
noninteractive mode when their Guardian environment
IN and OUT filenames are different.)
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
gtacl(1)
•
Attempt to filter data passing through all OSS environment standard input, output, and error files. Refer to
Input/Output Filtering under NOTES later in this
reference page for more information.
The default action is to filter only the standard input and output
files that are connected to an OSS regular file, device file, pipe,
or FIFO that cannot be accessed through a Guardian environment filename.
The -c and -i options, and the -c and +i options are mutually
exclusive. When they are specified on the command line, the last
option specified takes effect.
-inspect on | -inspect off | -inspect saveabend
Indicates the debugging mode to be used for the child process.
Specifying inspect on causes the child process to enter the
currently selected symbolic debugger when the -debug option is
specified or if a debug event occurs.
Specifying -inspect off causes the child process to enter the
default debugger when the -debug option is specified or if a
debug event occurs.
Specifying -inspect saveabend causes creation of a saveabend
file (sometimes called a core file or a process snapshot file) when
the process terminates abnormally.
The default debugging mode is the mode specified in the program file of the child process.
Refer to the manual for the debugging tool in use for additional
information about debug events and debugger use.
-jobid 0 | -jobid -1
Controls the job ID to be assigned to the child process.
Specifying -jobid 0 prevents the child process from running as
part of a batch job (the gtacl process cannot function as a batch
job ancestor, so no other value than -jobid -1 is supported).
Specifying -jobid -1 causes the child process to inherit its job ID
(if any) from gtacl.
The default value is -jobid -1.
-lib pathname Specifies the OSS pathname of a user library file in the Guardian
file system to be used by the child process; the program file for
the child process is modified to point to the specified library.
Use of this option requires write access to the program file for
the child process. The library file must be in the Guardian file
system on the same Hewlett Packard Enterprise node as the program file for the child process.
This option is needed only when a child process requires a user
library and an alternate is needed. The default action is to run
the child process with no modification to its user library usage.
527188-024
Hewlett Packard Enterprise
4−35
gtacl(1)
OSS Shell and Utilities Reference Manual
+lib
Specifies that the child process is to run without any user library
file; the program file for the child process is modified so that it
does not point to a library.
Use of this option requires write access to the program file for
the child process.
This option is needed only when a child process has used a user
library that is no longer needed. The default action is to run the
child process with no modification to its user library usage.
-mem n
Specifies the amount of memory to allocate for the data stack of
the child process in 2048-byte virtual memory pages (1-64).
(Used for G-series TNS or accelerated child processes only.)
The default amount is determined by the program file executed
as the child process.
-name {/G/}processname
Starts the child process as a named process using the specified
name; processname must conform to Guardian process name
rules for length.
If /G/ is omitted, the full filename of the process is resolved
using Guardian environment rules. Refer to the RUN command
description in the TACL Reference Manual for the rules affecting
process name length and resolution.
The rules for mapping between Guardian filenames and OSS
pathnames mean that processname cannot begin with the dollar
sign ($) used in the Guardian environment.
If only -name /G is specified, the operating system creates a
unique four-character process name.
The default action is to use the process name attribute for the
program file of the child process.
+name
Starts the child process as an unnamed process. This
specification is ignored if the Guardian RUNNAMED process
attribute is set in the program file for the child process.
If you specify neither the -name nor the +name option, the
default behavior is +name.
-nowait
Exits without waiting for the child process to terminate. Refer to
Input/Output Filtering under NOTES later in this reference
page.
If you use this option, the effects of the following options are
restricted:
&quot;-c command&quot;
&quot;-cv command&quot;
&quot;-i&quot;
&quot;+i&quot;
If you do not specify the -nowait option, the default action is to
wait for the child process to terminate.
4−36
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
gtacl(1)
-p pathname
Runs the specified program as the child process. This option is
an alternate syntax for the -prog option followed by the -- option
(described later in this reference page). For example, gtacl -p
pathname operands is equivalent to specifying gtacl -prog pathname -- operands.
No other option can be specified after this option on the gtacl
command line.
-pfs n
Specifies the size of the operating system process file segment
(PFS) for the child process in 2048-byte virtual memory pages
(64-512). The default size is determined from the program file
executed as the child process.
Refer to the TACL Reference Manual for additional information
about PFS pages.
-pmsg on | -pmsg off
Specifies whether the gtacl command displays status information for the child process on the OSS standard output file of the
gtacl process.
Specifying -pmsg on means the name (for a named child process) or the operating system cpu, pin (for an unnamed child process), the program file name, and exit status information is
displayed. Specifying -pmsg off means no information is
displayed.
The default setting for display is -pmsg off.
-prog pathname
Runs the specified program file as the child process.
If this option is specified, the gtacl command uses the OSS
environment variable PMSEARCHLIST to resolve (expand)
pathname when it consists of a single Guardian filename component. If the OSS environment variable PMSEARCHLIST is
not defined, then gtacl uses the /G/system/system subvolume.
If the named file cannot be found in /G/system/system, then the
current version of /G/system/sysnn is used. If the file is not
found, an error diagnostic is printed and gtacl terminates.
If this option is not specified, the default action is to run the file
/G/system/system/tacl or /G/system/sysnn/tacl.
-reclen length Specifies the record length (1-4096) in bytes to be reported when
a device inquiry request occurs for a file that gtacl is filtering.
The default record length is 80 bytes. For systems running
J06.05 and later J-series RVUs, H06.16 and later H-series
RVUs, or G06.32 and later G-series RVUs, if you start an
SQLCI process from the gtacl utility, the record length can be
up to 255 bytes, and the default record length is 132 bytes.
-s
527188-024
Suppresses propagation of all current OSS environment variables to the TACL process. This option takes precedence if the
-f option is also used.
Hewlett Packard Enterprise
4−37
gtacl(1)
OSS Shell and Utilities Reference Manual
-swap pathname
Specifies the name of a Guardian swap file or swap volume for
the data segment of the child process. This option is no longer
used and is provided for compatibility with previous releases. If
specified, the name must be
•
in OSS pathname syntax
•
valid for an existing file
but is otherwise ignored. The operating system chooses a swap
volume.
-term pathname
Specifies the filename of a Guardian terminal device to be used
as the home terminal of the child process. The name must be
specified in OSS pathname syntax.
The default action is to use the home terminal of the gtacl process.
Refer to the TACL Reference Manual for additional information
about Guardian terminal device names.
If the gtacl process is to be run in the background, Hewlett
Packard Enterprise recommends using /G/zhome as the home
terminal for the child process. $ZHOME is a reliable home terminal on which the process can perform write operations. For
more information about $ZHOME, see the NonStop NS-Series
Operations Guide.
--
Specifies that there are no more options on the gtacl command
line. Any information following this option is either processed
as redirection specifications or passed to the child process as
arguments.
Operands
All operands that the gtacl command does not interpret as option arguments are passed in the
Guardian environment Startup message sent to the child process. gtacl does not expand
operands or interpret special characters.
If the command line is entered through the OSS environment /bin/sh shell, the shell can process
or expand operands on the command line before passing the line to gtacl to interpret. When an
operand contains blanks or special characters normally processed by the shell, you must use quotation marks or escape characters correctly or unexpected actions might result. Refer to the sh(1)
reference page for more information.
Up to 980 bytes of arguments can be passed to the child process.
DESCRIPTION
The gtacl command executes a Guardian program, TACL macro, TACL routine, TACL alias, or
TACL command from the OSS environment within the same Hewlett Packard Enterprise node.
gtacl is an OSS process that spawns a Guardian process. gtacl allows you to specify the environment and initial process attributes of the child process.
4−38
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
gtacl(1)
EXAMPLES
1.
Running an interactive Guardian TACL process:
gtacl
2.
Running a TACL command:
gtacl -c ’status *, user’
3.
Running a Guardian program directly, without using the TACL command interpreter, using shell quotes to preserve special characters for
interpretation by the Guardian process:
gtacl -p fup ’info \sys.$vol.svol.*’
4.
Running a Guardian program directly, without using the TACL command interpreter (the shell escape character \ prevents the shell from
expanding the * character):
gtacl -p fup rename \*, newsvol.\*
5.
Running a Guardian program directly and passing a string containing a
blank within an operand:
gtacl -p locate ’&quot;two words&quot; $vol.svol.file’
6.
Running a server program ($NULL) using the -nowait option. In this
example the null program is passed a value of 1 for the backup CPU.
gtacl -nowait -name /G/null -cpu 0 -p /G/system/system/null 1
7.
Compiling a C program from a file in the Guardian file system:
gtacl -p c &lt; /G/vol/svol/file &gt; listing.output
8.
Compiling a C program from a file in the Guardian file system, with output to your Guardian default subvolume:
gtacl -p c &lt; /G/vol/svol/bit1C ’; nolist,runnable’
9.
Looking up the meaning of an errno value:
gtacl -p ’error’ $ERRNO
FILES
/G/system/system/tacl
Used as the default Guardian program to be executed. If the
operating system cannot find the program with this pathname, it
attempts to uses a copy from the current SYSnn subvolume.
NOTES
The gtacl command is commonly used to:
•
527188-024
Start an interactive TACL process (gtacl)
Hewlett Packard Enterprise
4−39
gtacl(1)
OSS Shell and Utilities Reference Manual
•
Execute a single Guardian environment command (gtacl -c command or
gtacl -cv command)
•
Run a Guardian environment program (gtacl -p prog args)
Using the -c or -cv option to run a Guardian process has the following advantages:
•
You can use Guardian environment user defaults and macros set up in a
TACLCSTM file.
•
You need not distinguish among TACL built-in functions, TACL macros,
or programs external to TACL.
•
You can use TACL RUN option syntax to direct input or output to Guardian files (such as spooler locations) that are not available through shell
redirection.
Using the -c or -cv option to run a Guardian process has the following disadvantages:
•
You cannot redirect standard input using the shell.
•
If you do not need TACL facilities, these options add the unnecessary
overhead of TACL process creation.
Using the -p option to run a Guardian process has the following advantages:
•
It runs the program without the overhead of TACL process creation.
•
There are no restrictions on redirection of OSS files using the shell.
Using the -p option to run a Guardian process has the following disadvantages:
•
TACL facilities (such as built-in functions or macros) cannot be used.
Redirecting Input or Output
The gtacl process does not have its own run options for redirecting output. Instead, standard
/bin/sh redirection operators can be used to redirect the input or output of the gtacl process for
any file that can be opened using the OSS-environment open( ) function.
You cannot use the OSS shell to redirect input or output for files that can be opened only using
the Guardian file system (with the FILE_OPEN_ procedure call). For such files, the gtacl -c
command or -cv command option must be used with TACL file redirection. For example, the following command fails because the OSS shell cannot directly open the Guardian spooler process:
gtacl -p tgal &lt; /G/vol/subvol/file &gt; /G/S/#TITAN
Instead, the following command must be used:
gtacl -c ’tgal /IN $vol.subvol.file, OUT $S.#TITAN/’
Many Guardian processes allow input or output from a process file. The gtacl process uses this
feature by running as a named process and passing its own name in place of the OSS standard
files that cannot be opened by the Guardian FILE_OPEN_ procedure call. For example, if gtacl
is invoked with the following command and runs with a system-generated process name of
$X123:
4−40
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
gtacl(1)
gtacl -c ’fileinfo $vol.subvol.*’ &gt; fileinfo.output
then the gtacl process runs TACL with an IN file named $X123.#CMD and an OUT file named
$X123.#OUT. When TACL first reads from $X123.#CMD, gtacl returns the string fileinfo
$vol.subvol.*; on the next read, gtacl returns an end-of-file indication. Any output from TACL
to $X123.#OUT is written by gtacl to its own OSS environment standard output file, which has
been connected to the OSS environment file fileinfo.output by shell redirection.
Input/Output Filtering
The gtacl process automatically converts line endings for data passing between the two environments. When gtacl encounters a newline indicator in input from the OSS environment, it
removes that character and forwards the line as a separate record to the Guardian environment.
When gtacl encounters the end of a record in input from the Guardian environment, it forwards
the line with a newline indicator to the OSS environment. This conversion is the primary filtering done to the data.
The following conditions limit the effectiveness of gtacl filtering:
•
Filtering can be used only for data passing through OSS environment
standard input, output, and error files and Guardian environment IN,
OUT, and STDERR files. Any files directly opened by a Guardian
environment process cannot be filtered.
•
Some Guardian processes do not accept a process file as an input or output file. Filtering will not work with such Guardian processes.
•
If filtering is used with redirection and either the -c command or -cv
command option, it cannot be used for filtering standard input. When
either of these options is specified, gtacl ignores its standard input file.
For example, the following command will not work because the input
from myfile.tgal is ignored:
gtacl -c ’tgal /OUT $s.#hold/’ &lt; myfile.tgal
Instead, either use an explicit Guardian input file:
gtacl -c ’tgal /IN MYFILE, OUT $S.#HOLD/’
or use the -p pathname option to run TGAL directly:
gtacl -p tgal &lt; myfile.tgal | lp -d hold
•
When the -nowait option is used with input/output filtering, the child
process can fail to do either of the following:
— open one or more of the gtacl standard files because gtacl has
stopped running
— access one or more of the gtacl standard files because gtacl has
stopped running
To avoid these problems, do not use the -c, -cv, -i, or +i options. Use
only files that can be opened from within the Guardian environment for
standard input and output when you use the -nowait option.
527188-024
Hewlett Packard Enterprise
4−41
gtacl(1)
OSS Shell and Utilities Reference Manual
Use in Shell Scripts
Guardian processes typically open a Guardian environment disk file for output by requesting protected or exclusive access. This practice can conflict with use of exclusion mode by an OSS process.
For example:
gtacl -p FUP ’INFO *’
fails if it is invoked from an OSS shell script and the output of the script is redirected to a Guardian disk file. Because the output file can be opened from the Guardian environment, gtacl does
not filter the output. However, because the output file is still open by the shell process executing
the script, FUP cannot open the file for exclusive access and terminates abnormally.
To avoid this problem when gtacl is used within a shell script, use the -i or +i option to force
input/output filtering, as follows:
gtacl -i -p FUP ’INFO *’
OSS Environment Variables
The following OSS environment variables affect the execution of the gtacl command.
PMSEARCHLIST
If this variable is defined, gtacl uses the value if necessary to
resolve a Guardian file identifier to find the program specified
with the -p or -prog option. The value can be one or more of the
following:
•
a list of Guardian subvolume names in Guardian external file name format, separated by spaces. These subvolumes are searched when resolving a Guardian file
identifier to find the program specified with the -p or
-prog option.
•
the TACL command interpreter #DEFAULTS built-in
variable.
•
the TACL command interpreter identifiers
#DEFAULTS/CURRENT/ or #DEFAULTS/SAVED/.
If this variable is not defined, gtacl uses the /G/system/system
subvolume to resolve a relative filename.
PWD
This variable must resolve to a valid Guardian filesystem subvolume name. If the value for this variable appears to be an OSS
pathname outside of the /G directory, gtacl ignores the value.
If this variable is correctly specified, gtacl interprets the value as
a Guardian volume and subvolume name. The gtacl process
passes the value to the child process in the default volume and
subvolume part of the Guardian environment Startup message.
If this variable is not defined or is incorrectly specified, then
gtacl uses the inherited default volume and subvolume names
from the =_DEFAULTS DEFINE for the Guardian environment
Startup message.
Unless the -s option is used, OSS environment variables are converted into
4−42
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
gtacl(1)
Guardian PARAMs and passed to the child process in a Guardian-environment
PARAM system message. Underscores in an OSS environment variable name
are converted to circumflex (ˆ) characters in the equivalent Guardian PARAM
name.
A single PARAM name and value can contain up to 255 bytes of character information for one environment variable. If the length of an OSS environment variable name plus the value for that variable exceeds 254 bytes, the variable is not
converted and an error message is sent to the standard output file for gtacl.
Up to 1024 bytes of PARAM names and values are supported. PARAM names
and values are accumulated from the current shell environment variables by
default, in the order defined. If more OSS environment variables need to be converted and passed than fit within the 1024-byte limit, only those that fit are
passed. The remaining OSS environment variables are ignored and gtacl issues
a warning message.
If the 1024-byte limit does not allow needed environment variables to be passed,
the -f flag can be used to specify a specific set to be passed. When the -f flag is
used, no accumulated environment variables are passed. Instead, each environment variable specified in the text file associated with the -f flag is converted to a
separate Guardian PARAM. The converted PARAMs from the file must still fit
within the 1024-byte limit.
Guardian Environment Variables
The following Guardian environment variables affect the execution of the gtacl command.
DEFINEs
=_DEFAULTS Provides the default values for the current Guardian volume and subvolume names.
If the -defmode on option is used, all Guardian DEFINEs inherited by gtacl are inherited by the child process. Up to 256K
bytes of DEFINEs can be inherited. The actual maximum
depends on the size of the PFS for the child process.
If the -defmode off option is used, only the Guardian
=_DEFAULTS DEFINE values inherited by gtacl are inherited
by the child process.
DIAGNOSTICS
Error diagnostics are written to the OSS environment standard error file of the gtacl process. All
gtacl error messages are prefixed with gtacl[n]:, where n is a unique message number. The
following messages can appear:
gtacl[1]:
unrecognized option option_name
You specified an option that gtacl does not recognize.
Check for typographical errors and reenter a corrected command
line.
gtacl[2]:
unable to open $RECEIVE, error n strerror(n)
Guardian file-system error n was returned when gtacl attempted
to open its own Guardian $RECEIVE file. The meaning of that
error number as returned by the strerror( ) function is displayed.
The recovery action depends on the Guardian file-system error
527188-024
Hewlett Packard Enterprise
4−43
gtacl(1)
OSS Shell and Utilities Reference Manual
number. Refer to the Guardian Procedure Errors and Messages
Manual for an explanation of the error and suggested errorspecific recovery actions.
gtacl[3]:
unable to get default volume, DEFINEINFO error n
Guardian file-system error n was returned from a call to the
Guardian DEFINEINFO procedure that attempted to get the
information for the =_DEFAULTS DEFINE. A system software
problem might exist; the =_DEFAULTS DEFINE should exist
for all user processes.
Refer to the DEFINEINFO procedure description in the Guardian Procedure Calls Reference Manual for the meaning of the
error returned. Check the current value of your =_DEFAULTS
DEFINE by using the OSS shell info_define command.
gtacl[4]:
the option_name option must be followed by
permissible_values
You specified the indicated option with an unrecognized value.
Check for typographical errors and reenter a corrected command
line.
gtacl[5]:
Unable to run pathname, error (error, err_detail) :
explanation
The child process for the program file pathname could not be
started by gtacl using the Guardian PROCESS_LAUNCH_ procedure call. The Guardian error error was returned by
PROCESS_LAUNCH_. A brief explanation of that error
number is displayed as explanation. The associated error detail
return value is shown as err_detail. For many values of error,
the value of err_detail is also a Guardian file-system error
number.
Refer to the PROCESS_LAUNCH_ description in the Guardian
Procedure Calls Reference Manual and to the error description
in the Guardian Procedure Errors and Messages Manual for an
explanation of the error and suggested error-specific recovery
actions.
gtacl[6]:
Unable to open child process, error n: strerror(n)
The gtacl command detected an error while trying to open the
child process and send the child process a sequence of Guardian
environment startup messages. The Guardian file-system error n
was returned. The meaning of that error number as returned by
the strerror( ) function is displayed.
Refer to the Guardian Procedure Errors and Messages Manual
for an explanation of the error and suggested error-specific
recovery actions. A typical error is 201, because the child process terminated as soon as it started. If this is the case, use the
-inspect saveabend option to create a saveabend (process
snapshot) file or the -debug option to start the child process
within a debugging tool.
4−44
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
gtacl(1)
gtacl[7]:
Unable to read from &lt;$RECEIVE|stdfile&gt;, error n:
strerror(n)
The gtacl process detected an error while reading its Guardian
$RECEIVE file or the standard file indicated by stdfile. The
Guardian file-system error n was returned. The meaning of that
error number as returned by the strerror( ) function is displayed.
Refer to the Guardian Procedure Errors and Messages Manual
for an explanation of the error and suggested error-specific
recovery actions.
gtacl[8]:
Unable to write to stdfile, error n: strerror(n)
The gtacl process detected an error while reading the standard
file indicated by stdfile. The Guardian file-system error n was
returned. The meaning of that error number as returned by the
strerror( ) function is displayed.
Refer to the Guardian Procedure Errors and Messages Manual
for an explanation of the error and suggested error-specific
recovery actions.
gtacl[9]:warning: unable to propagate all environment variables
The gtacl process cannot convert all of the OSS environment
variables into Guardian environment PARAMs. Some variables
have not been passed to the child process.
No action is necessary if the full set of OSS environment variables is not needed by the child process. To eliminate this message, reduce the number of OSS environment variables to a set
that will convert and fit into a single Guardian-environment
PARAM message and then reissue the gtacl command. Refer to
the section on interprocessor command interpreter messages in
the Guardian Procedure Errors and Messages Manual for more
information about the PARAM message format and usage.
gtacl[10]:
unable to get process information, procedure
error n
The gtacl process received the Guardian file-system error n
when trying to determine its own Guardian process attributes.
The gtacl process uses many of its own Guardian process attributes (such as processor number and home terminal name) as
default values when creating the child process.
The Guardian procedure call indicated by procedure encountered the problem. This message occurs when one of the following conditions is true:
•
The version of gtacl used is not compatible with the version of the operating system.
•
The NonStop Kernel message system does not have
enough resources to provide the information.
•
A coding error exists within this version of gtacl.
Recovery action depends on the error returned. Refer to the
description of procedure in the Guardian Procedure Calls
Reference Manual for more detailed information about the error
527188-024
Hewlett Packard Enterprise
4−45
gtacl(1)
OSS Shell and Utilities Reference Manual
when returned by that procedure.
gtacl[11]:
internal error - description
The gtacl process has detected the situation described by
description. This error should also create a saveabend file for
the gtacl process.
Report this problem to your service provider. Give the service
provider a copy of the saveabend (process snapshot) file and
describe the conditions necessary to reproduce the problem.
gtacl[12]:
unable to allocate n bytes for purpose
The gtacl process could not allocate the indicated amount of
memory from its heap. This probably indicates that gtacl could
not allocate a Guardian file-system extent on the extended segment file used for the heap.
If this problem occurs because of disk allocation failure, run
gtacl using an extended swap volume or extended segment file
that has more free space.
gtacl[13]:
unable to send msgtype message, error n:
strerror(n)
The gtacl process could not send a Guardian-environment
Startup, ASSIGN, or PARAM message to its child process. The
Guardian file-system error n was returned. The meaning of that
error number as returned by the strerror( ) function is displayed.
Refer to the Guardian Procedure Errors and Messages Manual
for an explanation of the error and suggested error-specific
recovery actions.
gtacl[14]:
procedure error n on file: strerror(n)
The indicated procedure returned Guardian file-system error n
for the named file. The meaning of that error number as returned
by the strerror( ) function is displayed.
Refer to the Guardian Procedure Errors and Messages Manual
for an explanation of the error and suggested error-specific
recovery actions.
gtacl[15]:
procedure returned error n: strerror(n)
The indicated procedure returned Guardian file-system error n
for the named file. The meaning of that error number as returned
by the strerror( ) function is displayed.
Refer to the Guardian Procedure Errors and Messages Manual
for an explanation of the error and suggested error-specific
recovery actions.
gtacl[16]:
Unable to open pathname, error n: strerror(n)
The file with the specified pathname could not be opened when
the -f option was used. The Guardian file-system error n was
returned for the file. The meaning of that error number as
returned by the strerror( ) function is displayed.
Refer to the Guardian Procedure Errors and Messages Manual
for an explanation of the error and suggested error-specific
recovery actions.
4−46
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
gtacl(1)
EXIT VALUES
The gtacl process returns the following exit values (the Guardian environment completion code
always equals the gtacl exit value plus 256):
0
The child process terminated with an exit value of 0 or 5, or the
-nowait option was specified and the child process started successfully. This value corresponds to the Guardian environment
completion codes 256 and 231.
170
An error prevented gtacl from starting the child process. This
value corresponds to the Guardian environment completion code
426.
171
Warnings occurred during the start of the child process. This
value corresponds to the Guardian environment completion code
427.
172
An error prevented gtacl from receiving the termination status of
the child process. This value corresponds to the Guardian
environment completion code 428.
173
The child process terminated with a negative completion code.
This value corresponds to the Guardian environment completion
code 429.
174
The gtacl process terminated abnormally. This value
corresponds to the Guardian environment completion code 430.
In all other cases, gtacl returns the exit status value and Guardian completion
code that it receives from the child process.
RELATED INFORMATION
Commands: info_define(1), osh(1), sh(1).
Functions: open(2), strerror(3).
Files: core(4).
STANDARDS CONFORMANCE
The gtacl command is an Hewlett Packard Enterprise extension to the XPG4 Version 2
specification.
527188-024
Hewlett Packard Enterprise
4−47
hash(1)
OSS Shell and Utilities Reference Manual
NAME
hash - Affects memory of where utilities are located
SYNOPSIS
hash [utility ...] -r
FLAGS
-r
Causes the hash command to forget all locations of utilities and commands.
DESCRIPTION
The hash command affects the way the current shell environment remembers the locations of
utilities.
When the name of a command or utility is specified for utility, the hash command adds the location of that command or utility to its list of remembered locations.
When the -r flag is used, hash forgets all previously remembered locations of utilities and commands.
When utility is not specified and the -r flag is not used, hash reports the contents of its list of
remembered locations.
EXAMPLES
1.
The following command lists the commands whose locations the hash
command currently remembers:
hash
NOTES
The hash command is a shell built-in command. It differs from the regular commands in that it
does not open a new shell process when it executes.
A general discussion of shell built-in commands and a list of the OSS shell built-in commands
are in the reference page for sh(1).
RELATED INFORMATION
Commands: sh(1).
4−48
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
head(1)
NAME
head - Displays the beginning of a file
SYNOPSIS
head [-c bytes] [-n lines] [file ...]
FLAGS
-c bytes Specifies the number of bytes (not characters) to display. If the last
byte written is not a newline character, a newline character is
appended to the output.
-n lines
Specifies the number of lines to display. The default value for lines is
10.
DESCRIPTION
The head command prints the first lines lines or bytes bytes of each of the specified files to the
standard output file.
If you do not specify file, head displays from the standard input file.
Environment Variables
This command supports the use of the LANG, LC_ALL, LC_CTYPE, LC_MESSAGES, and
NLSPATH environment variables.
EXAMPLES
To display the first 5 lines of a file named test, enter:
head -n 5 test
EXIT VALUES
The head command returns the following values:
0 (zero)
The command completed sucessfully.
&gt;0
An error occurred.
RELATED INFORMATION
Commands: cat(1), more(1), tail(1).
STANDARDS CONFORMANCE
This command conforms to the XPG4 Version 2 specification.
The following feature is an extension to the XPG4 Version 2 specification:
•
527188-024
The -c flag is supported.
Hewlett Packard Enterprise
4−49
history(1)
OSS Shell and Utilities Reference Manual
NAME
history - Lists previously executed commands
SYNOPSIS
history
DESCRIPTION
The history command displays the contents of the history file, which contains a list of previously executed commands. The history command is an exported alias for the fc -l command and
is compiled into the OSS shell. (See the reference page for the fc command.) history can be
unset or redefined. See &quot;Command Aliasing&quot; in the sh reference page.
EXAMPLES
1.
The following command lists the contents of the history file:
history
NOTES
The history command is a shell built-in command. It differs from the regular commands in that it
does not open a new shell process when it executes.
A general discussion of shell built-in commands and a list of the OSS shell built-in commands
are in the reference page for sh(1).
RELATED INFORMATION
Commands: fc(1), sh(1).
4−50
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
iconv(1)
NAME
iconv - Converts encoded characters to another code set
SYNOPSIS
iconv
-f from_code
-t to_code
[file ...]
FLAGS
-f from_code
Specifies the input code set
-t to_code
Specifies the output code set
Operands
file
specifies the file to be converted
DESCRIPTION
The iconv command converts the encoding of characters in file from one coded character set to
another and writes the results to the standard output file.
The input and output coded character sets are identified by the arguments from_code and
to_code. If the file operand is not specified on the the command line, the iconv command reads
the standard input file.
If you specify invalid characters in the input stream, iconv returns an error message, writes the
already converted data to standard output, and exits with a status greater than 0 (zero.)
If you specify characters in the input stream that are valid members of the input code set but are
invalid members of the output code set, the input value is translated into a substitute character.
Such conversions are called non-identical conversions. The value of the substitute character
depends on the output code set specified.
The default value is 0x1A (the ASCII character SUB); the default value is 0xFFFD (the UCS-2
REPLACEMENT CHARACTER) for conversions to the UCS-2 code set. If the conversion is
done by using a table, the substitute character may be specified by a target_sub directive in the
source translation table. The default is 0x1A if there is no target_sub directive.
If a non-identical conversion occurred while converting an input file, the iconv utility will
attempt to print a warning message to the standard error file, once per file. If an input file is large
it is possible that the non-identical conversion warning will not be printed, even if such conversions occurred. The exit status is not affected by a non-identical conversion.
If the LOCPATH environment variable is not defined or is set to the empty string (&quot;&quot;), iconv
looks for converters and conversion tables in the default path: /usr/lib/nls/loc:/etc/nls/loc.
Otherwise, iconv looks in the directories specified by LOCPATH. If no valid converters or
conversion tables are found in the directories specified by LOCPATH, the default path is
searched too. If the superuser is using iconv, LOCPATH is ignored. $LOCPATH is an environment variable which, if set, specifies directories containing the iconv and iconvTable subdirectories to be used instead of the default directories. The value of $LOCPATH must be a colonseparated list of directories in which iconv can find the subdirectories containing converters and
conversion tables. Specified directories must have the same organization as the /usr/lib/nls/loc
directory.
527188-024
Hewlett Packard Enterprise
4−51
iconv(1)
OSS Shell and Utilities Reference Manual
conversion_directory/iconv/*
is a directory containing algorithmic converters, where
conversion_directory is specified in $LOCPATH.
conversion_directory/iconvTable/*
is a directory containing iconv conversion tables generated by
genxlt, where conversion_directory is specified in $LOCPATH.
Environment Variables
The following environment variables affect the execution of the iconv command: LANG,
LC_ALL, LC_MESSAGES, NLSPATH.
DIAGNOSTICS
The following error messages have an exit value of 1:
Usage: iconv -f &lt;from&gt; -t &lt;to&gt; [&lt;infile&gt;]
Invalid command line
iconv: Cannot open converter
Failure to open a converter
iconv: Unable to allocate enough memory
Memory allocation failure
iconv: Input file cannot be opened
Failure to open the input file
iconv:read
Failure to read an input file
iconv: write
Failure to write to the output file
The following error messages have an exit value of 2:
iconv: truncated character found
Uncompleted multibyte character in the input file
iconv: invalid character found
Invalid character in the input file
EXIT VALUES
If successful, the iconv command exits with a value of 0 (zero). If unsuccessful, the iconv command exits with a value greater than zero and writes an error message to the standard error file.
EXAMPLES
To convert the contents of the file eucjp.file from code set eucJPC to SJIS, and store the
results in the file sjis.file, enter:
iconv -f eucJP -t SJIS eucjp.file &gt; sjis.file
To convert the contents of the file latin1.file from code set ISO 8859-1 to code set ISO
8859-2 and store the results in the file latin2.file, enter:
iconv -f ISO8859-1 t-UCS-2 latin1.file | iconv -f UCS-2 -t ISO8859-2 &gt;
latin2.file
This conversion uses an intermediate code set (UCS-2) because there are no conversion tables or
algorithmic converters available for converting directly from ISO 8859-1 to ISO 8859-2.
4−52
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
iconv(1)
FILES
/usr/lib/nls/loc/iconv/*
Contains algorithmic converters.
/usr/lib/nls/loc/iconvTable/*
Contains table converters.
RELATED INFORMATION
Commands: genxlt(1).
527188-024
Hewlett Packard Enterprise
4−53
id(1)
OSS Shell and Utilities Reference Manual
NAME
id - Displays the user’s system identity
SYNOPSIS
id [user]
id -G [-n] [user]
id -g [-nr] [user]
id -u [-nr] [user]
FLAGS
-g
Outputs only the effective group ID by using the printf format
&quot;%u\n&quot;.
-G
Outputs all different group IDs (effective, real, and supplementary)
only by using the printf format &quot;%u\n&quot;. If there is more than one distinct group affiliation, this flag outputs each such affiliation by using
the printf format %u before the new line is output.
-n
Outputs the name in the printf format %s instead of the group ID by
using the printf format %u.
-r
Outputs the real ID instead of the effective ID.
-u
Outputs the effective user ID only by using the printf format &quot;%u\n&quot;.
DESCRIPTION
The id command writes a message containing the user and group IDs and the corresponding
names of the invoking process or the specified user to the standard output file. When effective
names and IDs do not match the real ones, the id command writes both.
If multiple groups are supported (according to the NGROUPS_MAX variable), the supplementary group affiliations of the invoking process are also written.
If the selected user has more than one allowable group membership listed in the group database,
these are written in the same manner as the supplementary groups.
EXAMPLES
To display your user and group IDs, enter:
id
Information similar to the following is displayed:
uid=9259(tom) gid=1000(mcm) groups=0(system),1(daemon),
3(kmem),5(cf), 8(news),20(dumper),28(operator),
1003(engtools),1016(ddts),1052(mailuni), 1059(utils),
1062(lisbon),1065(perf)
RELATED INFORMATION
Commands: logname(1).
Functions: getuid(2).
4−54
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
info_define(1)
NAME
info_define - Displays attributes and values of existing DEFINEs
SYNOPSIS
info_define [-detail ]
{ { define-name}[ define-name] ... | all }
FLAGS
-detail
Displays all the values and attributes of each DEFINE specified by
define-name.
define-name
Specifies the name of the DEFINE whose information is to be
displayed. The name can be 2 through 24 characters long. The first
character must be an equal sign (=) and the second character must be
an alphabetic character. A list of DEFINE names, separated by blanks,
can be specified.
all
Displays information on all existing DEFINEs.
DESCRIPTION
The info_define command is specific to Hewlett Packard Enterprise and is an OSS shell built-in
command. It displays attributes and values associated with the specified DEFINEs. It is similiar
to the TACL INFO DEFINE command. See the TACL Reference Manual (INFO DEFINE) for
more information on the output of info_define.
Environment Variables
LANG
Determines the locale to use for the locale categories when both
LC_ALL and the corresponding environment variable (beginning with
LC_) do not specify a locale.
LC_ALL
Determines the locale to be used to override any values for locale
categories specified by the settings of LANG or any environment variable beginning with LC.
LC_CTYPE
Determines the locale for interpretation of bytes of text data as characters (for example, single-byte characters as opposed to multibyte characters in arguments).
LC_MESSAGES
Determines the locale that should be used to affect the format and contents of diagnostic messages written to the standard error file and informational messages written to the standard output file.
EXAMPLES
1.
To display the principal attributes of all DEFINEs, enter:
info_define all
527188-024
Hewlett Packard Enterprise
4−55
info_define(1)
OSS Shell and Utilities Reference Manual
This command might result in the following display:
DEFINE NAME
CLASS
FILE
==ACK
=MAP
=$BILL.WORK.FILE
DEFINE NAME
==_DEFAULTS
CLASS
=DEFAULTS
VOLUME =$BILL.WORK
2.
To display all attributes of an existing DEFINE that have a value, enter:
info_define -detail =TEST3
This command might result in the following display:
DEFINE NAME
==TEST3
CLASS
=TAPE
VOLUME =SCRATCH
LABELS =OMITTED
USE
=IN
DEVICE
=$TAPE2
MOUNTMSG
=Transferring files-Mr. Smith
NOTES
The info_define command is a shell built-in command. It differs from the regular commands in
that it does not open a new shell process when it executes.
A general discussion of shell built-in commands and a list of the OSS shell built-in commands
are in the sh(1) reference page.
EXIT VALUES
The following exit values are returned:
0
DEFINEs displayed successfully.
&gt;0
An error occurred.
RELATED INFORMATION
Commands: add_define(1), del_define(1), reset_define(1), set_define(1), show_define(1).
STANDARDS CONFORMANCE
The info_define command is an Hewlett Packard Enterprise extension to the XPG4 Version 2
specification.
4−56
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
initfilepriv(1)
NAME
initfilepriv - Sets file privileges for selected system files
SYNOPSIS
initfilepriv sysnn_path
FLAGS
Operands
sysnn_path
Specifies the path to the system subvolume that contains the system files that require file privileges (such as the Backup and
Restore 2 product files). Typically, this is the current system subvolume, usually specified as /G/system/sysnn, where nn indicates the system installation that is currently running.
DESCRIPTION
The initfilepriv command sets the file privileges on selected system files. For example, it sets
the file privileges on the Backup and Restore 2 product such that, when started by a user with the
appropriate privilege, it can back up and restore files that are in restricted-access filesets.
This command is supported on systems running L15.02 or later L-series RVUs, J06.11 or later Jseries RVUs, or H06.22 or later H-series RVUs only. The Backup and Restore 2 product must
also be installed on a system running L15.02 or later L-series RVUs, J06.11 or later J-series
RVUs, or H06.22 or later H-series RVUs only.
Only Members of Safeguard SECURITY-PRV-ADMINISTRATOR (SEC-PRIV-ADMIN or
SPA) group are permitted to use this command.
For more information about restricted-access filesets and file privileges, see the Open System Services Management and Operations Guide.
EXAMPLE
To set the file privileges for Backup and Restore 2 application files in the sys21 subvolume,
enter:
initfilepriv /G/system/sys21
RELATED INFORMATION
Commands: getfilepriv(1), setfilepriv(1).
Functions: setfilepriv(2).
STANDARDS CONFORMANCE
This command is an Hewlett Packard Enterprise extension.
527188-024
Hewlett Packard Enterprise
4−57
ipcrm(1)
OSS Shell and Utilities Reference Manual
NAME
ipcrm - Removes message queues, semaphore identifiers, or shared memory identifiers and deallocates their data structures
SYNOPSIS
ipcrm [-m shared_memory_ID] [-M shared_memory_key]
[-q message_queue_ID] [-Q message_key]
[-s semaphore_ID] [-S semaphore_key]
FLAGS
-m shared_memory_ID
Removes the shared memory identifier specified by the
shared_memory_ID value, and removes the associated shared memory
segment and data structure after the final detach operation.
-M shared_memory_key
Removes the shared memory identifier created with the specified
shared_memory_key value, and removes the associated shared
memory segment and data structure after the final detach operation.
-q message_queue_ID
Removes the message queue identifier specified by the
message_queue_ID value, and removes the associated message queue
and the data structure.
-Q message_key
Removes the message queue identifier created with the specified
message_key value, and removes the associated message queue and
the data structure.
-s semaphore_ID
Removes the semaphore set identifier specified by the semaphore_ID
value, and removes the associated set of semaphores and data structure.
-S semaphore_key
Removes the semaphore set identifier created with the specified
semaphore_key value, and removes the associated set of semaphores
and data structure.
DESCRIPTION
The ipcrm command removes one or more message queues, semaphore identifiers, or shared
memory identifiers from the processor on which it runs. The details of the remove operations are
described on the reference pages for the msgctl( ), semctl( ), and shmctl( ) functions. The
identifiers and keys can be determined by using the ipcs command.
EXAMPLES
1.
To remove the shared memory segment associated with shared memory
identifier 128 from the processor on which your terminal session runs,
enter:
ipcrm -m 128
4−58
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
ipcrm(1)
2.
To remove the shared memory segment associated with shared memory
identifier 128 on processor 4, enter:
run -cpu=4 ipcrm -m 128
3.
To remove the semaphore set associated with semaphore identifier 222
from the processor on which your terminal session runs, enter:
ipcrm -s 222
4.
To remove the semaphore set associated with semaphore identifier 222
on processor 4, enter:
run -cpu=4 ipcrm -s 222
5.
To remove the message queue associated with message queue identifier
4 from the processor on which your terminal session runs, enter:
ipcrm -q 4
6.
To remove the message queue associated with message queue identifier
4 on processor 4, enter:
run -cpu=4 ipcrm -q 4
NOTES
The ipcs and ipcrm commands have no provision for managing interprocess communication
(IPC) facilities on processors other than the one in which they run. To manage IPC facilities
across all the processors of a node, you need to use these commands with other OSS shell commands and command flags, such as the run command -cpu= flag.
RELATED INFORMATION
Commands: ipcs(1), run(1).
Functions: msgctl(2), msgget(2), semctl(2), semget(2), semop(2), shmctl(2), shmdt(2),
shmget(2).
STANDARDS CONFORMANCE
This utility is an Hewlett Packard Enterprise extension to the XPG4 Version 2 specification.
527188-024
Hewlett Packard Enterprise
4−59
ipcs(1)
OSS Shell and Utilities Reference Manual
NAME
ipcs - Reports interprocess communication (IPC) facilities status
SYNOPSIS
ipcs [-a | -bcopt] [-mqs]
FLAGS
-a
Is the same as specifying the -b, -c, -o, -p, and -t flags.
-b
Writes the maximum number of bytes in message queues, the maximum allowed size of segments for shared memory, and the number of
semaphores in each semaphore set.
-c
Writes the username and group name of the user who created the facility.
-m
Writes information about active shared memory segments.
-o
Writes the following usage information:
-p
•
Number of messages on queue.
•
Total number of bytes in message queues.
•
Number of processes attached to shared memory segments.
Writes the following usage information:
•
OSS process ID of the last process to receive a message and
OSS process ID of the last process to send a message currently
on message queues
•
Process identifier of the creating process for a facility
•
Process identifier of the last process to call the shmat( ),
shmdt( ), or shmctl( ) function for the segment
-q
Writes information about active message queues.
-s
Writes information about active semaphore sets.
-t
Writes the times of the following actions:
•
Either:
— The creation of the facility
— The last control operation that changed the facility
(either by modifying permissions information for the
facility or by removing the facility)
4−60
•
The last use of the msgsnd( ) function and of the msgrcv( )
function on message queues
•
The last use of the shmat( ) function and of the shmdt( ) function on shared memory
•
The last use of the semop( ) function on semaphore sets
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
ipcs(1)
DESCRIPTION
The ipcs command writes information to the standard output file about active interprocess communication (IPC) facilities on the processor in which the command runs. If you do not specify
any flags, ipcs writes information in short form about the currently active message queues, shared
memory segments, semaphore sets, and local message queue headers.
Column Headings
The column headings and the meanings of the columns in an ipcs listing follow. The letters in
parentheses indicate the flags that cause the corresponding heading to appear. The word &quot;all&quot;
means that the heading always appears. The flags determine only what information is provided
for each facility; they do not determine which facilities are listed.
T (all)
Type of facility:
q
Message queue
m
Shared memory segment
s
Semaphore
ID (all) The identifier for the facility entry.
KEY (all)
The key used as a parameter in the msgget( ), semget( ), or shmget( )
function call that created the facility entry.
Note that the key of a shared memory segment is changed to
IPC__PRIVATE when the segment is removed. The entry disappears
when the last process attached to the segment detaches it.
MODE (all)
The facility access modes and flags. The mode consists of 11 characters that are interpreted as follows. The first character is one of the following:
R
If a process is waiting on a msgrcv() function call.
S
If a process is waiting on a msgsnd() function call.
D
The associated shared memory segment was removed. The
entry disappears when the last process attached to the segment detaches it.
-
The corresponding special flag is not set.
The second character is reserved for future use.
The next nine characters are interpreted as three sets of three characters each. The first set refers to the owner’s permissions; the second
set to permissions of others in the user group of the facility entry; and
the third set to all others. Within each set, the first character indicates
permission to read, the second character indicates permission to write
or alter the facility entry, and the last character is currently unused.
The permissions are indicated as follows:
r
527188-024
Read permission is granted.
Hewlett Packard Enterprise
4−61
ipcs(1)
OSS Shell and Utilities Reference Manual
w
Write permission is granted (for shared memory segments).
a
Alter permission is granted (for semaphore sets).
-
The indicated permission is not granted.
OWNER (all)
The username of the owner of the facility entry.
GROUP (all)
The group name of the owner of the facility entry.
CREATOR (a,c)
The username of the creator of the facility entry.
CGROUP (a,c)
The group name of the creator of the facility entry.
Note that when the OWNER, GROUP, CREATOR, and CGROUP
columns all appear, the user IDs and group IDs are displayed instead of
the usernames and group names.
CBYTES (a,o)
The number of bytes in messages currently outstanding on the associated message queue.
QNUM (a,o)
The number of messages currently outstanding on the associated message queue.
QBYTES (a,b)
The maximum number of bytes allowed in messages outstanding on
the associated message queue.
LSPID (a,p)
The ID of the latest process that sent a message to the associated
queue.
LRPID (a,p)
The ID of the latest process that received a message from the associated queue.
STIME (a,t)
The time when the last message was sent to the associated queue.
RTIME (a,t)
The time when the last message was received from the associated
queue.
CTIME (a,t)
The time when the associated entry was created or changed.
NATTCH (a,o)
The number of processes attached to the associated shared memory
segment.
SEGSZ (a,b)
The size of the associated shared memory segment.
4−62
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
ipcs(1)
CPID (a,p)
The process ID of the creator of the shared memory entry.
LPID (a,p)
The process ID of the latest process to call the shmat( ), shmdt( ), or
shmctl( ) function for the associated shared memory segment.
ATIME (a,t)
The time when the latest call to the shmat( ) function was made for the
associated shared memory segment.
DTIME (a,t)
The time when the latest call to the shmdt( ) function was made for the
associated shared memory segment.
NSEMS (a,b)
The number of semaphores in the set associated with the semaphore
entry.
OTIME (a,t)
The time when the latest semaphore operation was completed on the
set associated with the semaphore entry.
EXAMPLES
1.
Sample output from entering the ipcs command without flags follows:
Message Queues:
T
ID
KEY
MODE
OWNER
GROUP
q
q
q
q
q
q
q
0
65537
65538
65539
65540
65541
6
0x00010381
0x00010307
0x00010311
0x0001032f
0x0001031b
0x00010339
0x0002fe03
R
R
R
R
R
R
SUPER
SUPER
SUPER
SUPER
SUPER
SUPER
SUPER
SUPER
SUPER
SUPER
SUPER
SUPER
SUPER
SUPER
rw-rw-rwrw-rw-rwrw-rw-rwrw-rw-rwrw-rw-rwrw-rw-rwrw-rw-rw-
Shared memory:
T
ID
KEY
MODE
OWNER
GROUP
m
m
m
65537
720898
65539
0x00000000
0x00010300
0x00000000
D rw------- rw-rw-rwD rw-------
SUPER
SUPER
SUPER
SUPER
SUPER
SUPER
Semaphores:
527188-024
T
ID
KEY
MODE
OWNER
GROUP
s
s
s
131072
65537
131076
0x4d02086a
0x00000000
0x00010301
- ra-ra---- ra------- ra-ra-ra-
SUPER
SUPER
SUPER
SUPER
SUPER
SUPER
Hewlett Packard Enterprise
4−63
ipcs(1)
OSS Shell and Utilities Reference Manual
2.
To display information on a processor other than the one for your terminal session, start the ipcs utility using the run command -cpu= flag for
the appropriate processor. For example, to see information for processor
4, enter:
run -cpu=4 ipcs
NOTES
The ipcs and ipcrm commands have no provision for managing IPC facilities on processors other
than the one in which they run. To manage IPC facilities across all the processors of a node, you
need to use these commands with other OSS shell commands and command flags, such as the
run command -cpu= flag.
RELATED INFORMATION
Commands: ipcrm(1), run(1).
Functions: msgrcv(2), msgsnd(2), semctl(2), semget(2), semop(2), shmat(2), shmctl(2),
shmdt(2), shmget(2).
STANDARDS CONFORMANCE
This utility is an Hewlett Packard Enterprise extension to the XPG4 Version 2 specification.
4−64
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
jobs(1)
NAME
jobs - Lists processes
SYNOPSIS
jobs [-lnp] [job ...]
FLAGS
-l
Lists process IDs in addition to the normal information.
-n
Lists jobs that have stopped or exited since last invocation.
-p
Lists only the process group.
DESCRIPTION
The jobs command lists information about the process specified as job. If job is not specified, the
jobs command provides information on all active processes.
EXAMPLES
1.
The following command lists all jobs, including job numbers and PIDs.
jobs -l
NOTES
The jobs command is a shell built-in command. It differs from the regular commands in that it
does not open a new shell process when it executes.
A general discussion of shell built-in commands and a list of the OSS shell built-in commands
are in the reference page for sh(1).
RELATED INFORMATION
Commands: sh(1).
527188-024
Hewlett Packard Enterprise
4−65
join(1)
OSS Shell and Utilities Reference Manual
NAME
join - Joins the lines of two files
SYNOPSIS
Current syntax
join [-a filenum_a]
[-e string]
[-o number.field, ... ]
[-t character]
[-v filenum_v]
[-1 field1] [-2 field2]
file1 file2
Obsolescent syntax
join [-a filenum_a]
[-e string]
[-j num | field | num fld]
[-o number.field, ...]
[-t character]
file1 file2
FLAGS
-1 field1 Specifies the number of the join field for file1. field1 is a decimal
integer starting with 1.
-2 field2 Specifies the number of the join field for file2. field2 is a decimal
integer starting with 1.
-a filenum_a
Produces an output line for each unmatched line found in file1 if
filenum_a is 1 or in file2 if number is 2. Without -a, join produces output only for lines containing a matching field. If both -a 1 and -a 2 are
used, the output contains all unmatched lines.
-e string Replaces empty output fields with string.
-j num | fld | num fld
(Obsolescent) Specifies the join field fld for file num, where num is 1
for file1 or 2 for file2. If you do not specify num, join uses fld in both
files. Without -j, join uses the first field in each file. The default value
for both num and fld is 1.
If you enter only a 1 or a 2 as an argument to -j, join interprets this
argument as the file number (num); integers greater than 2 are interpreted as the field number (fld). Therefore, if you want to specify a
field number of 1 or 2, you must precede the fld specification with a
num argument; otherwise, the join command interprets the 1 or 2 as the
file number (num).
-o number.field
Produces output lines consisting of the fields given by one or more
number.field arguments in the specified order, where number is 1 for
file1 or 2 for file2 and field is a field number. Multiple -o arguments
should be separated with commas.
4−66
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
join(1)
-t character
Uses character (a single character) as the field separator character in
the input and the output. Every appearance of character in a line is
significant. The default separator is a space. If you do not specify -t,
join also recognizes the tab and newline characters as separators.
With default field separation, the collating sequence is that of sort -b.
If you specify -t, the sequence is that of a plain sort. To specify a tab
character, enclose it in ’ ’ (single quotes).
-v filenum_v
Produces an output line for each unmatched line in filenum_v (where
filenum_v is 1 for file1 or 2 for file2), instead of the default output. If
both -v 1 and -v 2 are specified, join produces output lines for all
unmatched lines.
DESCRIPTION
The join command reads file1 and file2, joins the lines in those files that contain common fields
or otherwise according to the flags, and writes the results to the standard output file.
The join field is the field in the input files that join searches to determine what will be included in
the output. One line appears in the output for each identical join field appearing in both file1 and
file2. The output line consists of the join field, the rest of the line from file1, then the rest of the
line from file2.
You can specify the standard input file in place of file1 or file2 by substituting a - (dash) for the
operand.
Both input files must be sorted according to the collating sequence specified by the
LC_COLLATE environment variable, if set, for the fields on which they are to be compared (by
default, the first field in each line).
Fields are normally separated by a space, a tab character, or a newline character. join treats consecutive occurrences of these separators as a single separator and discards leading separators.
Use the -t flag to specify another field separator.
Environment Variables
This command supports the use of the LANG, LC_ALL, LC_COLLATE, LC_CTYPE,
LC_MESSAGES, and NLSPATH environment variables.
EXAMPLES
Note that the vertical alignment shown in these examples might not be consistent with your output.
1.
To perform a simple join operation on two files, phonedir and names,
whose first fields contain employee last names, enter:
join phonedir names
If phonedir contains the following telephone directory:
Binst
Dickerson
Eisner
Green
Hrarii
Janatha
Lewis
Takata
527188-024
555-6235
555-1842
555-1234
555-2240
555-0256
555-7358
555-3237
555-5341
Hewlett Packard Enterprise
4−67
join(1)
OSS Shell and Utilities Reference Manual
Wozni
555-1234
and names contains this listing of names and department numbers:
Eisner
Frost
Green
Takata
Wozni
Dept.
Dept.
Dept.
Dept.
Dept.
389
217
311
454
520
then join phonedir names displays:
Eisner
Green
Takata
Wozni
555-1234
555-2240
555-5341
555-1234
Dept.
Dept.
Dept.
Dept.
389
311
454
520
Each line consists of the join field found in both files (the last name), followed by the rest of the line found in phonedir, followed by the rest of
the line found in names.
2.
To display unmatched lines in names as well as matched lines in both
files, enter:
join -a 2 phonedir names
If phonedir contains:
Binst
Dickerson
Eisner
Green
Hrarii
Janatha
Lewis
Takata
Wozni
555-6235
555-1842
555-1234
555-2240
555-0256
555-7358
555-3237
555-5341
555-1234
and names contains:
Eisner
Frost
Green
Takata
Wozni
Dept.
Dept.
Dept.
Dept.
Dept.
389
217
311
454
520
then join -a 2 phonedir names displays:
Eisner
Frost
Green
Takata
Wozni
555-1234
555-2240
555-5341
555-1234
Dept.
Dept.
Dept.
Dept.
Dept.
389
217
311
454
520
This command performs the same join operation as in the first example
and also lists the lines of names that have no match in phonedir (the
entry for Frost).
4−68
Hewlett Packard Enterprise
527188-024
User Commands (g - j)
join(1)
3.
To perform a join operation and display selected fields, enter:
join -o 2.3,2.1,1.2 phonedir names
This command displays the following fields in this order:
Field 3 of names (department number without &quot;Dept.&quot;)
Field 1 of names (last name)
Field 2 of phonedir (telephone number)
If phonedir contains:
Binst
Dickerson
Eisner
Green
Hrarii
Janatha
Lewis
Takata
Wozni
555-6235
555-1842
555-1234
555-2240
555-0256
555-7358
555-3237
555-5341
555-1234
and names contains:
Eisner
Frost
Green
Takata
Wozni
Dept.
Dept.
Dept.
Dept.
Dept.
389
217
311
454
520
then join -o 2.3,2.1,1.2 phonedir names displays:
389
311
454
520
4.
Eisner
Green
Takata
Wozni
555-1234
555-2240
555-5341
555-1234
To perform a join operation on a field other than the first field, enter:
sort -b +1 -2 phonedir | join -1 2 - numbers
This command combines the lines in phonedir and names, comparing
the second field of phonedir to the first field of numbers.
First, this command sorts phonedir by the second field, because both
files must be sorted by the join field. The output of sort is then piped to
join. The - (dash) by itself causes the join command to use this sorted
output as its file1. -1 2 defines the second field of the sorted phonedir as
the join field. This field is compared to the first field of numbers (its
join field is not specified with a -2 flag).
If phonedir contains:
Binst
Dickerson
Eisner
Green
Hrarii
Janatha
Lewis
527188-024
555-6235
555-1842
555-1234
555-2240
555-0256
555-7358
555-3237
Hewlett Packard Enterprise
4−69
join(1)
OSS Shell and Utilities Reference Manual
Takata
Wozni
555-5341
555-1234
and numbers contains:
555-0256
555-1234
555-5555
555-7358
then sort ... | join ... displays:
555-0256
555-1234
555-1234
555-7358
Hrarii
Eisner
Wozni
Janatha
Each telephone number in numbers is listed with the name listed in
phonedir for that telephone number. Note that join lists all the matches
for a given field. In this case, join lists both Eisner and Wozni as having the telephone number 555-1234. The telephone number 555-5555
is not listed, because it does not appear in phonedir.
EXIT VALUES
The join command returns the following values:
0 (zero)
The command completed successfully.
&gt;0
An error occurred.
RELATED INFORMATION
Commands: awk(1), cmp(1), comm(1), cut(1), diff(1), grep(1), paste(1), sort(1), uniq(1).
Files: locale(4).
STANDARDS CONFORMANCE
This command conforms to the XPG4 Version 2 specification. The obsolescent version of the
command does not conform to the XPG4 Version 2 specification, and its -j flag should be considered a temporary extension to the XPG4 Version 2 specification.
4−70
Hewlett Packard Enterprise
527188-024
Section 5. User Commands (k - l)
This section contains reference pages for the Open System Services (OSS) user
commands with names starting with the letters k through l.
527188-024
Hewlett Packard Enterprise
5−1
kill(1)
OSS Shell and Utilities Reference Manual
NAME
kill - Sends a signal to a running process
SYNOPSIS
kill -l [exit_status]
kill -s signal_name process_ID ...
Obsolescent Versions
kill -s -signal_name | -signal_number process_ID ...
The kill command sends a signal to one or more running processes.
FLAGS
-l [exit_status]
Lists all supported signal names. If the exit_status argument is specified and it is a
value corresponding to an OSS process terminated by a signal, the name of the signal
that terminated the OSS process is listed.
-s signal_name
Specifies the signal to send, using one of the symbolic names defined for required signals or job control signals. Values of signal_name are recognized in both uppercase
and lowercase letters and with or without the prefix SIG. The symbolic name 0 (zero),
which represents the value 0 (zero), is also recognized. The corresponding signal is
sent instead of the SIGTERM signal.
-signal_name
Equivalent to -s signal_name. (Obsolescent.)
-signal_number
Specifies a nonnegative decimal integer representing the signal to be used instead of
the SIGTERM signal as the sig argument in the call to the kill command for OSS process IDs. (Obsolescent.)
The effects of specifying any signal number other than those listed by the command kill -l is
unknown. In the obsolescent versions, if the first argument is a negative integer, it is interpreted
as an option to -signal_number, not as a negative process_ID operand specifying a process
group.
DESCRIPTION
The kill command sends a signal to one or more running processes, specified by each process_ID
argument.
The OSS shell contains a built-in command named kill that functions in the same way as the regular OSS command named kill, except that a new shell process is started for each execution of
the regular form of kill. The shell built-in version is the default. Both the regular form and the
shell built-in form of the kill command are described in this reference page.
Specify OSS processes to be signaled by giving their process identification number as the
process_ID argument.
Specify the signal to be sent with the -s signal_name argument, the -signal_name option, or the
-signal_number option.
If neither the -s signal_name argument, the -signal_name option, nor the -signal_number option
is specified, the SIGTERM signal is sent by default.
All numeric signal specifications except 0 (zero) are obsolescent.
The shell reports the PID of each process running in the background (unless you start more than
one process in a pipeline, in which case the shell reports the number of the last process). You can
5−2
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
kill(1)
also use the ps command to find the process ID of commands.
The sensitivity level of the target process must equal that of the process sending the signal,
unless you have the sysadmin command authorization. If you have the writeupclearance or
writeupsyshi base privileges, you can send signals to processes that dominate your process and
are dominated by your clearance of the System High sensitivity level, respectively.
Unless you are are operating with superuser authority, the process you want to signal must
belong to you. When operating with superuser authority, you can signal any process.
Hewlett Packard Enterprise extensions
For each Guardian process_ID argument ([/E/systemname]/G/process or
[/E/systemname]/G/cpu,pin), the kill command performs actions equivalent to the Guardian
PROCESS_STOP procedure called with the process handle of the given process. This TACLtype stop action can be accessed only by invoking the kill command with the signal_name set to
SIGGUARDIAN.
If you identify a process by its CPU and PIN numbers you must use the following form:
/E/system-name/G/cpu,pin
Specifying a Guardian process ID with any of the other signal names results in an error and an
unsuccessful exit.
Special Process IDs
There are several special process IDs (PIDs) you can specify to cause the following special
actions:
0
The signal is sent to all processes having a process group ID equal to the process group ID of the sender, except those with PIDs 0 and 1.
-pid
The signal is sent to all processes whose process group number is equal to
the absolute value of pid.
Note that when you specify any negative PID, you must also specify the signal to be sent, even
the default signal SIGTERM.
Arguments
The kill command supports the following arguments:
process_ID
A decimal integer specifying a process or process group to be signaled.
Job control job identification notation is applicable only for invocation of the
kill command in the current shell execution environment. The definition of
process_ID is true for all signal numbers and values except the SIGGUARDIAN signal.
If signal name SIGGUARDIAN is specified, the process_ID operand must
be of the following form:
[/E/systemname]{/G/process | /G/cpu,pin}
exit_status
A decimal integer that specifies a signal number or the exit status of an OSS
process terminated by a signal.
Environment Variables
The following environment variables affect the execution of the kill command:
LANG
527188-024
Determines the locale to use for the locale categories when both the LC_ALL variable
and the corresponding environment variable (whose name begins with LC_) do not
specify a locale.
Hewlett Packard Enterprise
5−3
kill(1)
OSS Shell and Utilities Reference Manual
LC_ALL
Determines the locale to be used to override any values for locale categories specified
by the settings of the LANG variable or any environment variable whose name begins
with LC_.
LC_CTYPE
Determines the locale for the interpretation of bytes of text data as characters (for
example, a single-byte character rather than a multibyte character in an argument).
LC_MESSAGES
Determines the locale that should be used to affect the format and contents of diagnostic messages written to the standard error file and informational messages written to the
standard output file.
Standard Output
When the -l flag is not specified, the standard output file is not used.
When the -l flag is specified, the symbolic name of each signal is written in the following format:
%s%c,signal_name,separator
where signal_name is in uppercase without the prefix SIG, and separator is a blank space. For
the last signal written, separator is a newline.
When both the -l flag and the exit_status argument are specified, the symbolic name of the
corresponding signal is written in the following format:
%s,signal_name
EXAMPLES
1.
To terminate a given process, enter:
kill 1095
This terminates process 1095 by sending it the default SIGTERM signal. Note that process 1095 might not actually terminate if you have programmed it to ignore or catch the
SIGTERM signal.
2.
To terminate several processes that ignore the default signal, enter:
kill -s KILL 17285 15692
This sends the SIGKILL signal to processes 17285 and 15692. SIGKILL is a special
signal that normally cannot be ignored or caught.
3.
To terminate all of your background processes, enter:
kill 0
This sends the SIGTERM signal to all members of the shell process group. This
includes all background processes started with &amp;. Although the signal is sent to the
shell, it has no effect there because the shell ignores the default signal 15.
4.
To terminate all your processes and log out, enter:
kill -s KILL 0
This sends the SIGKILL signal to all members of the shell process group. Because the
shell cannot ignore SIGKILL, this also terminates the login shell and logs you out. If
you are using multiple windows, this closes the active window.
5−4
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
5.
kill(1)
To send a different signal to a process, enter:
kill -s USR1 1103
This sends the SIGUSR1 signal to process 1103. The action taken on the SIGUSR1 signal is defined by the particular application you are running. (The name of the kill command is misleading because many signals, including SIGUSR1, do not terminate
processes.)
6.
To list the signal names in numerical order, stripped of the prefix SIG, enter:
kill -l
1) HUP
2) INT
3) QUIT
4) ILL
5) URG
6) ABRT
7) IO
8) FPE
9) KILL
10) bad trap
11) SEGV
12) WINCH
13) PIPE
14) ALRM
15) TERM
16) USR1
17) USR2
18) CHLD
19) bad trap
20) STOP
21) TSTP
22) MEMERR
23) NOMEM
24) MEMMGR
25) STK
26) TIMEOUT
27) LIMIT
28) CONT
29) TTIN
30) TTOU
31) ABEND
32) GUARDIAN
This list may vary from system to system.
7.
To stop a Guardian process, enter:
kill -s GUARDIAN /G/cmon
This issues a PROCESS_STOP_() against the named Guardian process $cmon.
8.
To stop a Guardian process on another system or to stop a Guardian process that you
identify by its cpu,pin, enter:
kill -99 /E/tsii/G/3,57
This issues a PROCESS_STOP_() against the Guardian process identified by the
cpu,pin (3,57) running on the system named \tsii.
FILES
/usr/include/signal.h
Specifies signal names.
NOTES
The OSS kill command has both a shell built-in version and a regular version. The two versions
have the same features and functionality. The only difference between the two versions is that
the shell built-in version does not start a new shell process when it is invoked. Both versions are
described in the reference page for kill. The shell built-in version is the default. To specify the
regular version, use the full pathname: /bin/kill For more information about shell built-in commands, refer to the reference page for sh(1).
527188-024
Hewlett Packard Enterprise
5−5
kill(1)
OSS Shell and Utilities Reference Manual
RELATED INFORMATION
Commands: ps(1), sh(1).
Functions: kill(2).
STANDARDS CONFORMANCE
Extensions have been added to the kill command in order to support the Guardian environment.
5−6
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
ksh(1)
NAME
ksh - Describes the OSS shell
SYNOPSIS
ksh [-i] [-c command_string | -s] [+ | -abCefmnosuvx] [+ | -o][option ...] | [argument ...] |
[file] [argument ...]
The OSS shell is an interactive command interpreter and a command programming language.
The OSS shell is based on the UNIX Korn shell.
FLAGS
-c command_string
Causes ksh to read commands from command_string.
-i
Causes ksh to run as an interactive shell. The SIGTERM signal is thus ignored, and
the SIGINT signal is caught, causing the current command to be terminated and a new
prompt to be output.
-r
Causes ksh to run as a restricted shell.
-s
Causes ksh to read commands from standard input. If you do not specify the -c flag or
do not specify any arguments to ksh other than flags, ksh automatically invokes the -s
flag. The -c flag overrides the -s flag, however.
The rest of the flags that can be used with ksh are described under the set subcommand, in the
subsection Special ksh Commands.
DESCRIPTION
ksh is an alias for sh.
The OSS shell carries out commands either interactively from a terminal keyboard or from a file.
Some important features of the OSS shell are as follows:
•
Command aliasing
•
Filename substitution
•
Tilde substitution
•
Command substitution
•
Parameter substitution
•
Job control
•
Inline editing
A file from which the shell carries out commands is usually called a shell script, a shell procedure, or a command file.
A simple command is a sequence of words separated by spaces or tabs. A word is a sequence of
characters that contains no unquoted spaces or tabs. The first word in the sequence (numbered as
0) usually specifies the name of a command. Any remaining words, with a few exceptions, are
passed to that command. A space refers to both spaces and tabs.
The value of a simple command is its exit value if it ends normally or (octal) 200 added to the
signal number if it terminates due to a signal. For a list of status values, see the signal() system
call.
A pipeline is a sequence of one or more commands separated by a | (vertical bar). In a pipeline,
the standard output of each command becomes the standard input of the next command. Each
527188-024
Hewlett Packard Enterprise
5−7
ksh(1)
OSS Shell and Utilities Reference Manual
command runs as a separate process, and the shell waits for the last command to end. A filter is a
command that reads its standard input, transforms it in some way, then writes it to its standard
output. A pipeline normally consists of a series of filters. Although the processes in a pipeline
(except the first process) can execute in parallel, they are synchronized to the extent that each
program needs to read the output of its predecessor.
The exit value of a pipeline is the exit value of the last command.
A list is a sequence of one or more pipelines separated by ; (semicolon), &amp; (ampersand), &amp;&amp;
(two ampersands), or || (two vertical bars) and optionally ended by a ; (semicolon), an &amp; (ampersand), a |&amp; (coprocess), or a newline. These separators and terminators have the following
effects:
;
Causes sequential execution of the preceding pipeline; the shell waits for the pipeline
to finish.
&amp;
Causes asynchronous execution of the preceding pipeline; the shell does not wait for
the pipeline to finish.
&amp;&amp;
Causes the list following it to be executed only if the preceding pipeline returns a 0
(zero) exit value.
||
Causes the list following it to be executed only if the preceding pipeline returns a
nonzero exit value.
The cd command is an exception; if it returns a nonzero exit value, no subsequent commands in a list are executed, regardless of the separator characters.
The ; and &amp; separators have equal precedence, as do &amp;&amp; and ||. The single-character separators
have lower precedence than the double-character separators. An unquoted newline character following a pipeline functions the same as a ; (semicolon).
Access Control Lists (ACLs)
If the shell creates a file, for example when you redirect stdout or stderr to a file, and the parent
directory for that file has an ACL that contains default ACL entries, the file inherits ACL entries
from the parent directory as described in the acl(5) reference page.
Comments
The shell treats as a comment any word that begins with a # character and ignores that word and
all characters following up to the next newline character.
Shell Flow Control Statements
Unless otherwise stated, the value returned by a command is that of the last simple command
executed in the command.
for identifier [in word...] ;do list ;done
Each time a for command is executed, identifier is set to the next word taken from the
in word list. If in word ... is omitted, the for command executes the do list once for
each positional parameter that is set. (See Parameter Substitution.) Execution ends
when there are no more words in the list.
select identifier [in word...] ;do list ;done
Prints on standard error (file descriptor 2) the set of words, each word preceded by a
number. If in word... is omitted, then the positional parameters are used instead. (See
Parameter Substitution.) The PS3 prompt is printed and a line is read from the standard input. If this line consists of the number of one of the listed words, then the value
of the parameter identifier is set to the word corresponding to this number. If this line
is empty, the selection list is printed again. If neither of these cases is true, the value of
the parameter identifier is set to null. The contents of the line read from standard input
5−8
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
ksh(1)
is saved in the REPLY parameter. The list is executed for each selection until a break
or end-of-file character is encountered.
case word in [[(]
pattern [| pattern] ...) list ;;] ... esac&quot; Executes the list associated with the first pattern
that matches word. The form of the patterns is the same as that used for filename generation. (See Filename Generation.)
if list ;then list [elif
list ;then list] ... [;else list] ;fi&quot; Executes the list following if and, if it returns a 0 (zero)
exit status, executes the list following the first then. Otherwise, the list following elif
is executed and, if its value is 0 (zero), the list following the next then is executed.
Failing that, the else list is executed. If no else list or then list is executed, then the if
command returns a 0 (zero) exit status.
while list ;do list ;done
until list ;do list ;done
Executes the while list repeatedly, and if the exit status of the last command in the list
is 0 (zero), executes the do list; otherwise the loop terminates. If no commands in the
do list are executed, then the while command returns a 0 (zero) exit status; until can be
used in place of while to negate the loop termination test.
(list)
Executes list in a separate environment. Note that if two adjacent open parentheses are
needed for nesting, a space must be inserted to avoid arithmetic evaluation.
{list;}
Executes list. Note that unlike the metacharacters ( and ), { and } are reserved words
and must be at the beginning of a line or after a ; (semicolon) in order to be recognized.
[[expression]]
Evaluates expression and returns a 0 (zero) exit status when expression is TRUE. See
Conditional Expressions for a description of expression.
function identifier {list;}
identifier () {list;}
Defines a function that is referenced by identifier. The body of the function is the list
of commands between { and }. (See Functions.)
time pipeline
Executes pipeline and prints the elapsed time as well as the user and system time on
standard error.
The following reserved words are recognized only when they appear, without single or double
quotation marks, as the first word of a command:
case
do
done
elif
else
esac
fi
for
function
if
select
then
527188-024
Hewlett Packard Enterprise
5−9
ksh(1)
OSS Shell and Utilities Reference Manual
time
until
while
{}
[[ ]]
Command Aliasing
The first word of each command is replaced by the text of an alias (if an alias for this word was
defined). The first character of an alias name can be any nonspecial printable character, but the
rest of the characters must be the same as for a valid identifier. The replacement string can contain any valid shell script, including the metacharacters previously listed. The first word of each
command in the replaced text, other than any that are in the process of being replaced, will be
tested for aliases. If the last character of the alias value is a space, the word following the alias
will also be checked for alias substitution.
Aliases can be used to redefine special built-in commands but cannot be used to redefine the
reserved words previously listed. Aliases can be created, listed, and exported with the alias command and can be removed with the unalias command. Exported aliases remain in effect for
scripts invoked by name, but must be reinitialized for separate invocations of the shell. (See
Invocation.)
Aliasing is performed when scripts are read, not while they are executed. Therefore, for an alias
to take effect, the alias definition command has to be executed before the command that references the alias is read.
Aliases are frequently used as shorthand for full pathnames. An option to the aliasing facility
allows the value of the alias to be automatically set to the full pathname of the corresponding
command. These aliases are called tracked aliases.
The value of a tracked alias is defined the first time the corresponding command is looked up and
becomes undefined each time the PATH environment variable is reset. These aliases remain
tracked so that the next subsequent reference will redefine the value. Several tracked aliases are
compiled into the shell. The -h flag of the set command makes each referenced command name
into a tracked alias.
The following exported aliases are compiled into the shell, but can be unset or redefined:
autoload=’typeset -fu’
command=’command ’
functions=’typeset -f’
hash=’alias -t -’
history=’fc -l’
integer=’typeset -i’
local=typeset
nohup=’nohup ’
r=’fc -e -’
stop=’kill -STOP’
suspend=’kill -STOP $$’
type=’whence -v’
Tilde Substitution
After alias substitution is performed, each word is checked to see if it begins with an unquoted ˜
(tilde). If it does, then the word up to a / (slash) is checked to see if it matches a username in the
/etc/passwd file. If a match is found, the tilde and the matched name are replaced by the login
directory of the matched user. This is called a tilde substitution. If no match is found, the
5−10
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
ksh(1)
original text is left unchanged. A tilde by itself, or in front of a /, is replaced by the value of the
HOME parameter. A tilde followed by a + (plus sign) or - (dash) is replaced by $PWD and
$OLDPWD, respectively.
In addition, tilde substitution is attempted when the value of a variable assignment parameter
begins with a tilde.
Command Substitution
The standard output from a command enclosed in parentheses preceded by a dollar sign $( ) or a
pair of ‘‘ (grave accents) can be used as part or all of a word; trailing newlines are removed. In
the second (archaic) form, the string between the grave accents is processed for special quoting
characters before the command is executed. (See Quoting.) The command substitution $(cat
file) can be replaced by the equivalent but faster $(&lt;file). Command substitution of most special
commands that do not perform input/output redirection are carried out without creating a
separate process. An arithmetic expression enclosed in double parentheses preceded by a dollar
sign ( $(( )) ) is replaced by the value of the arithmetic expression within the double parentheses.
Parameter Substitution
A parameter is an identifier, one or more digits, or any of the characters *, @@@@, #, ?, -, $,
and !. A named parameter (a parameter denoted by an identifier) has a value and 0 (zero) or
more attributes. Named parameters can be assigned values and attributes by using the typeset
special command. The attributes supported by the shell are described later with the typeset special command. Exported parameters pass values and attributes to the environment.
The shell supports a 1-dimensional array facility. An element of an array parameter is referenced
by a subscript. A subscript is denoted by an arithmetic expression enclosed with [ ] (brackets).
To assign values to an array, use values of subscripts in the range of 0 to 1023. Arrays need not
be declared. Any reference to a named parameter with a valid subscript is legal and an array will
be created if necessary. Referencing an array without a subscript is equivalent to referencing the
element 0 (zero).
The value of a named parameter can be assigned by the following:
name=value [ name=value ]
If the integer attribute, -i, is set for name, the value is subject to arithmetic evaluation. Positional
parameters, which are denoted by a number, can be assigned values with the set special command. Parameter $0 is set from argument 0 (zero) when the shell is invoked. The $ (dollar sign)
character is used to introduce substitutable parameters.
${parameter}
Reads all the characters from the ${ (dollar sign left brace) to the matching } (right
brace) as part of the same word even if it contains braces or metacharacters. The value,
if any, of the parameter is substituted. The braces are required when parameter is followed by a letter, digit, or underscore that is not to be interpreted as part of its name or
when a named parameter is subscripted. If parameter is one or more digits, it is a positional parameter. A positional parameter of more than one digit must be enclosed in
braces. If parameter is * (asterisk) or @@@@ (at sign), all the positional parameters,
starting with $1, are substituted (separated by a field separator character). If an array
identifier with subscript * or @@@@ is used, the value for each of the elements is
substituted (separated by a field separator character).
${#parameter}
Substitutes the number of positional parameters if parameter is * or @@@@; otherwise, the length of the value of the parameter is substituted.
527188-024
Hewlett Packard Enterprise
5−11
ksh(1)
OSS Shell and Utilities Reference Manual
${#identifier[*]}
Substitutes the number of elements in the array identifier.
${parameter:-word}
Substitutes the value of parameter if it is set and non-null; otherwise, substitutes word.
${parameter:=word}
Sets parameter to word if it is not set or is null; the value of the parameter is then substituted. Positional parameters cannot be assigned values in this way.
${parameter:?word}
Substitutes the value of parameter if it is set and is non-null; otherwise, print word and
exit from the shell. If word is omitted, a standard message is printed.
${parameter:+word}
Substitutes word if parameter is set and is non-null; otherwise, substitutes nothing.
${parameter#pattern} | ${parameter##pattern}
Causes the value of this substitution to be the value of parameter with the matched
portion deleted if the shell pattern matches the beginning of the value of parameter;
otherwise the value of parameter is substituted. In the first form, the smallest matching
pattern is deleted and in the second form, the largest matching pattern is deleted.
${parameter%pattern} | ${parameter%%pattern}
Causes the value of this substitution to be the value of parameter with the matched part
deleted if the shell pattern matches the end of the value of parameter; otherwise, substitute the value of parameter. In the first form, the smallest matching pattern is
deleted and in the second form, the largest matching pattern is deleted.
If the : (colon) is omitted from the previous expressions, then the shell checks only whether
parameter is set or not.
In the previous expressions, word is not evaluated unless it is to be used as the substituted string,
so that, in the following example, pwd is executed only if d is not set or is null:
echo ${d:-$(pwd)}
The following parameters are automatically set by the shell:
# (hash mark)
The number of positional parameters in decimal.
- (dash)
Flags supplied to the shell on invocation or by the set command.
? (question mark)
The decimal value returned by the last executed command.
$ (dollar sign)
The process number of this shell.
_ (underscore)
Initially, an absolute pathname of the shell or script being executed as passed in the
environment. Subsequently, the value is assigned the last argument of the previous command. This parameter is not set for commands that are asynchronous.
5−12
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
ksh(1)
! (exclamation point)
The process number of the last background command invoked.
ERRNO The value of errno as set by the most recently failed system call. This value is system
dependent and is intended for debugging purposes.
LINENO
The line number of the current line within the script or function being executed.
OLDPWD
The previous working directory set by the cd command.
OPTARG
The value of the last option argument processed by the getopts special command.
OPTIND
The index of the last option argument processed by the getopts special command.
PPID
The process number of the parent of the shell.
PWD
The present working directory set by the cd command.
RANDOM
Each time this parameter is referenced, a random integer, uniformly distributed
between 0 and 32767, is generated. The sequence of random numbers can be initialized by assigning a numeric value to RANDOM.
REPLY This parameter is set by the select statement and by the read special command when
no arguments are supplied.
SECONDS
Each time this parameter is referenced, the number of seconds since shell invocation is
returned. If this parameter is assigned a value, then the value returned upon reference
will be the value that was assigned plus the number of seconds since the assignment.
The following parameters are used by the shell:
CDPATH
The search path for the cd command.
COLUMNS
If this variable is set, the value is used to define the width of the edit window for the
shell edit modes and for printing select lists.
EDITOR
If the value of this variable ends in vi and the VISUAL variable is not set, then the
corresponding option (see set under Special sh Commands) will be turned on.
ENV
If this parameter is set, then parameter substitution is performed on the value to generate the pathname of the script that will be executed when the shell is invoked. (See
Invocation.) This file is typically used for alias and function definitions.
FCEDIT
The default editor name for the fc command.
527188-024
Hewlett Packard Enterprise
5−13
ksh(1)
OSS Shell and Utilities Reference Manual
FPATH The search path for function definitions. This path is searched when a function with
the -u attribute is referenced and when a command is not found. If an executable file is
found, then it is read and executed in the current environment.
IFS
Internal field separators, normally spaces, tabs, and newlines that are used to separate
command words which result from command or parameter substitution and for separating words with the read special command. The first character of the IFS parameter is
used to separate arguments for the $* substitution. (See Quoting.)
HISTFILE
If this parameter is set when the shell is invoked, then the value is the pathname of the
file that will be used to store the command history. (See Command Reentry.)
HISTSIZE
If this parameter is set when the shell is invoked, the number of previously entered
commands that are accessible by this shell will be greater than or equal to this number.
The default is 128.
HOME The default argument (home directory) for the cd command.
LANG
Specifies the locale of your system, which is comprised of three parts: language, territory, and code set. The default locale is the C locale, which specifies the value English
for language, U.S. for territory, and ASCII for code set.
LC_ALL
Specifies the behavior for all aspects of the locale.
LC_COLLATE
Specifies the collating sequence to use when sorting names and when character ranges
occur in patterns. The default value is the collating sequence for American English. If
absent, the collating sequence can be taken from the LANG parameter. If both
LC_COLLATE and LANG are absent, the ANSI C collating sequence is used.
LC_CTYPE
Specifies the character classification information to use on your system. The default
value is American English.
LC_MESSAGES
Specifies the language in which system messages appear and the language that the system accepts for user input of yes and no strings. The default is American English.
LC_MONETARY
Specifies the monetary format for your system. The default value is the monetary format for American English.
LC_NUMERIC
Specifies the numeric format for your system. The default value is the numeric format
for American English.
LC_TIME
Specifies the date and time format for your system. The default value is the date and
time format for American English.
LINES
5−14
If this variable is set, the value is used to determine the column length for printing
select lists. Select lists will print vertically until about two-thirds of LINES lines are
filled.
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
ksh(1)
LOCPATH
Specifies a series of colon-separated search rules that describe where to look for
locales. These rules override the default search path of /usr/lib/nls/loc.
NLSPATH
Specifies a list of directories to search to find message catalogs.
PATH
The search path for commands. (See Execution.) You cannot change PATH if executing under rsh, except in .profile.
PS1
The value of this parameter is expanded for parameter substitution to define the primary prompt string which by default is the $ (dollar sign). The ! (exclamation point) in
the primary prompt string is replaced by the command number. (See Command Reentry.)
PS2
Secondary prompt string, by default &gt; (right angle bracket).
PS3
Selection prompt string used within a select loop, by default #? (number sign, question
mark).
PS4
The value of this parameter is expanded for parameter substitution and precedes each
line of an execution trace. If omitted, the execution trace prompt is + (plus sign).
SHELL The pathname of the shell is kept in the environment.
TMOUT
If set to a value greater than 0 (zero), the shell terminates if a command is not entered
within the prescribed number of seconds after issuing the PS1 prompt. (Note that the
shell can be compiled with a maximum bound for this value that cannot be exceeded.)
TZ
Current value for the time zone, if any.
VISUAL
If the value of this variable ends in vi, the corresponding option (see the set command
in Special ksh Commands) will be turned on.
The shell gives default values to PATH, PS1, PS2, TMOUT, and IFS, while HOME, SHELL,
and ENV are not set by the shell.
Interpretation of Spaces
After parameter and command substitution, the results of substitutions are scanned for the field
separator characters (those found in IFS), and split into distinct arguments where such characters
are found. Explicit null arguments (‘‘ or ’’) are retained. Implicit null arguments (those resulting
from parameters that have no values) are removed.
Filename Generation
Following substitution, each command word is scanned for the characters * (asterisk), ? (question mark), and [ ] (brackets), unless the -f option was set. If one of these characters appears, the
word is regarded as a pattern. The word is replaced with lexicographically sorted filenames that
match the pattern. If no filename is found that matches the pattern, the word is left unchanged.
When a pattern is used for filename generation, the . (dot) character at the start of a filename or
immediately following a / (slash), as well as the / character itself, must be matched explicitly. In
other instances of pattern matching, the / and . are not treated specially.
*
527188-024
Matches any string, including the null string.
Hewlett Packard Enterprise
5−15
ksh(1)
OSS Shell and Utilities Reference Manual
?
Matches any single character.
[...]
Matches any one of the enclosed characters. In an expression such as [a-z], the (dash) means &quot;through&quot; according to the current collating sequence. The collating
sequence is determined by the value of the LC_COLLATE environment variable. If
the first character following the [ (left bracket) is a ! (exclamation point), then any
character not enclosed is matched. A - can be included in the character set by putting it
as the first or last character.
A pattern_list is a list of one or more patterns separated from each other with a | (vertical bar).
Composite patterns can be formed with one or more of the following:
?(pattern_list)
Optionally matches any one of the given patterns.
*(pattern_list)
Matches zero or more occurrences of the given patterns.
+(pattern_list)
Matches one or more occurrences of the given patterns.
@@@@(pattern_list)
Matches exactly one of the given patterns.
!(pattern_list)
Matches anything, except one of the given patterns.
Character Classes
You can use the following notation to match filenames within a range indication:
[:charclass:]
This format instructs the system to match any single character belonging to charclass; the
defined classes correspond to ctype( ) subroutines as follows:
alnum
alpha
blank
cntrl
digit
graph
lower
print
punct
space
upper
xdigit
Your locale might define additional character properties, such as the following:
[:vowel:]
The preceding character class could be TRUE for a, e, i, o, u, or y. You could then use [:vowel]
inside a set construction to match any vowel. Refer to The LC_CTYPE Category section of the
locale file format reference page for more information.
5−16
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
ksh(1)
Quoting
The following characters have a special meaning to the shell and cause termination of a word
unless quoted:
; &amp; ( ) | ˆ &lt; &gt; &lt;newline&gt; &lt;space&gt; &lt;tab&gt;
Each of the metacharacters previously listed has a special meaning to the shell and causes termination of a word unless quoted. A character can be quoted (that is, made to stand for itself) by
preceding it with a \ (backslash). The pair \newline is ignored. All characters enclosed between
a pair of ‘’ (single quotes) are quoted. A single quote cannot appear within single quotes.
Inside &quot;&quot; (double quotes) parameter and command substitution occurs and \ quotes the characters
\, ‘, ’, and $. The meaning of $* and $@@@@ is identical when not quoted or when used as a
parameter assignment value or as a filename. However, when used as a command argument, ’$*’
is equivalent to ’$1d$2d. . .’, where d is the first character of the IFS parameter, whereas
’$@@@@’ is equivalent to ’$1’ ’$2’ . . . Inside ‘‘ (grave accents) \ (backslash) quotes the characters \, ‘, and $. If the grave accents occur within double quotes, then \ also quotes the ’ (single
quote) character.
The special meaning of reserved words or aliases can be removed by quoting any character of the
reserved word. The recognition of function names or special command names listed later cannot
be altered by quoting them.
Arithmetic Evaluation
An ability to perform integer arithmetic is provided with the let special command. Evaluations
are performed using long arithmetic. Constants are of the form [base#]n, where base is a decimal
number between 2 and 36 representing the arithmetic base and n is a number in that base. If base
is omitted, then base 10 is used.
An arithmetic expression uses the same syntax, precedence, and associativity of expression of
the C language. All the integral operators, other than ++, --, ?:, and , are supported. Named
parameters can be referenced by name within an arithmetic expression without using the parameter substitution syntax. When a named parameter is referenced, its value is evaluated as an arithmetic expression.
An internal integer representation of a named parameter can be specified with the -i option of the
typeset special command. Arithmetic evaluation is performed on the value of each assignment
to a named parameter with the -i attribute. If you do not specify an arithmetic base, the first
assignment to the parameter determines the arithmetic base. This base is used when parameter
substitution occurs.
Because many of the arithmetic operators require quoting, an alternative form of the let command is provided. For any command that begins with a ((, all the characters until a matching ))
are treated as a quoted expression. More precisely, ((...)) is equivalent to let &quot;...&quot;.
Note that ((...)) is a command with a return value, whereas $((...)) is the way to put the string
representation of the value of an arithmetic expression into the command line (that is, it is like a
$ variable).
Prompting
When used interactively, the shell prompts with the value of PS1 before reading a command. If
at any time a newline character is typed and further input is needed to complete a command, then
the secondary prompt (that is, the value of PS2) is issued.
Conditional Expressions
A conditional expression is used with the [[ compound command to test attributes of files and to
compare strings. Word splitting and filename generation are not performed on the words
between [[ and ]]. Each expression can be constructed from one or more of the following unary
or binary expressions:
527188-024
Hewlett Packard Enterprise
5−17
ksh(1)
OSS Shell and Utilities Reference Manual
-a file
TRUE, if file exists.
-b file
TRUE, if file exists and is a block-special file.
-c file
TRUE, if file exists and is a character-special file.
-d file
TRUE, if file exists and is a directory.
-f file
TRUE, if file exists and is an ordinary file.
-g file
TRUE, if file exists and has its setgid bit set.
-G file
TRUE, if file exists and its group ID matches the effective group ID of this process.
-h file
TRUE, if file exists and is a symbolic link.
-k file
TRUE, if file exists and has its sticky bit set.
-L file
TRUE, if file exists and is a symbolic link.
-n string TRUE, if length of string is nonzero.
-o option
TRUE, if option named option is on.
-O file
TRUE, if file exists and is owned by the effective user ID of this process.
-p file
TRUE, if file exists and is a FIFO special file or a pipe.
-r file
TRUE, if file exists and is readable by current process.
-s file
TRUE, if file exists and has size greater than 0 (zero).
-S file
TRUE, if file exists and is a socket.
-t file_des
TRUE, if file descriptor number file_des is open and associated with a terminal device.
-u file
TRUE, if file exists and has its setuid bit set.
-w file
TRUE, if file exists and is writable by current process.
-x file
TRUE, if file exists and is executable by current process. If file exists and is a directory, then the current process has permission to search in the directory.
-z string TRUE, if length of string is 0 (zero).
file1 -nt file2
TRUE, if file1 exists and is newer than file2.
file1 -ot file2
TRUE, if file1 exists and is older than file2.
file1 -ef file2
TRUE, if file1 and file2 exist and refer to the same file.
string = pattern
TRUE, if string matches pattern.
5−18
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
ksh(1)
string != pattern
TRUE, if string does not match pattern.
string1 &lt; string2
TRUE, if string1 collates before string2.
string1 &gt; string2
TRUE, if string1 collates after string2.
expression1 -eq expression2
TRUE, if expression1 is equal to expression2.
expression1 -ne expression2
TRUE, if expression1 is not equal to expression2.
expression1 -lt expression2
TRUE, if expression1 is less than expression2.
expression1 -gt expression2
TRUE, if expression1 is greater than expression2.
expression1 -le expression2
TRUE, if expression1 is less than or equal to expression2.
expression1 -ge expression2
TRUE, if expression1 is greater than or equal to expression2.
A compound expression can be constructed from these primitives by using any of the following,
listed in decreasing order of precedence.
(expression)
TRUE, if expression is TRUE. Used to group expressions.
! expression
TRUE if expression is FALSE.
expression1 &amp;&amp; expression2
TRUE, if expression1 and expression2 are both TRUE.
expression1 || expression2
TRUE, if either expression1 or expression2 is TRUE.
Input/Output
Before a command is executed, you can redirect its input and output by using a special notation
interpreted by the shell. The following can appear anywhere in a simple command or can precede or follow a command and are not passed on to the invoked command. Command and
parameter substitution occurs before word or digit is used, except as noted in the following text.
Filename generation occurs only if the pattern matches a single file and interpretation of spaces
is not performed.
&lt;word
Use file word as standard input (file descriptor 0).
&gt;word
Use file word as standard output (file descriptor 1). If the file does not exist, it is
created. If the file exists, and the noclobber option is on, this causes an error; otherwise, it is truncated to 0 (zero) length.
527188-024
Hewlett Packard Enterprise
5−19
ksh(1)
OSS Shell and Utilities Reference Manual
&gt;|word
Same as &gt;, except that it overrides the noclobber option.
&gt;&gt;word Use file word as standard output. If the file exists, output is appended to it (by first
seeking to the End-of-File); otherwise, the file is created.
&lt;&gt;word Open file word for reading and writing as standard input.
&lt;&lt;[-]word
The shell input is read up to a line that is the same as word, or to an End-of-File. No
parameter substitution, command substitution, or filename generation is performed on
word. The resulting document, called a here document, becomes the standard input. If
any character of word is quoted, then no interpretation is placed upon the characters of
the document; otherwise, parameter and command substitution occurs, \newline is
ignored, and \ must be used to quote the characters \, $, ‘, and the first character of
word. If - is appended to &lt;&lt;, then all leading tabs are stripped from word and from the
document.
&lt;&amp;digit The standard input is duplicated from file descriptor digit (see dup(2)). The standard
output is duplicated using &gt;&amp; digit.
&lt;&amp;-
The standard input is closed. The standard output is closed using &gt;&amp;-.
&lt;&amp;p
The input from the coprocess (or background process) is moved to standard input.
&gt;&amp;p
The output to the coprocess is moved to standard output.
If one of the preceding redirections is preceded by a digit, then the file descriptor number referred
to is that specified by the digit (instead of the default 0 or 1). For example:
... 2&gt;&amp;1
means file descriptor 2 is to be opened for writing as a duplicate of file descriptor 1.
The order in which redirections are specified is significant. The shell evaluates each redirection
in terms of the (file descriptor, file) association at the time of evaluation. For example:
... 1&gt;fname &gt;&amp;1
first associates file descriptor 1 with file fname. It then associates file descriptor 2 with the file
associated with file descriptor 1 (that is, fname). If the order of redirections is reversed, file
descriptor 2 is associated with the terminal (assuming file descriptor 1 is) and then file descriptor
1 is associated with file fname.
If a command is followed by &amp; and job control is not active, the default standard input for the
command is the empty /dev/null file. Otherwise, the environment for the execution of a command contains the file descriptors of the invoking shell as modified by input/output
specifications.
Environment
The environment is a list of name-value pairs that is passed to an executed program in the same
way as a normal argument list. The names must be identifiers and the values are character
strings. The shell interacts with the environment in several ways. On invocation, the shell scans
the environment and creates a parameter for each name found, giving it the corresponding value
and marking it export. Executed commands inherit the environment. If you modify the values
of these parameters or create new ones, using the export or typeset -x commands, they become
part of the environment. The environment used by any executed command is thus composed of
any name-value pairs originally inherited by the shell, whose values can be modified by the
current shell, plus any additions that must be noted in the export or typeset -x commands.
5−20
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
ksh(1)
You can augment the environment for any simple command or function by prefixing it with one
or more parameter assignments. A parameter assignment argument is a word of the form
identifier=value.
Thus, the following two expressions are equivalent (as far as the execution of command is concerned):
TERM=450 command argument ...
(export TERM; TERM=450; command argument ...)
Functions
The function reserved word is used to define shell functions. Shell functions are read in and
stored internally. Alias names are resolved when the function is read. Functions are executed
like commands with the arguments passed as positional parameters. (See Execution.)
Functions execute in the same process as the caller and share all files and the present working
directory with the caller. Traps caught by the caller are reset to their default action inside the
function. A trap condition that is not caught or ignored by the function causes the function to terminate and the condition to be passed on to the caller. A trap on EXIT set inside a function is
executed after the function completes in the environment of the caller. Ordinarily, variables are
shared between the calling program and the function. However, the special command typeset
used within a function defines local variables whose scope includes the current function and all
functions it calls.
The special command return is used to return from function calls. Errors within functions return
control to the caller.
Function identifiers can be listed with the -f or +f option of the typeset special command. The
text of functions is also listed with -f. Functions can be undefined with the -f option of the unset
special command.
Ordinarily, functions are unset when the shell executes a shell script. The -xf option of the
typeset command allows a function to be exported to scripts that are executed without a separate
invocation of the shell. Functions that need to be defined across separate invocations of the shell
should be specified in the ENV file with the -xf option of typeset.
Jobs
If the monitor option of the set command is turned on, an interactive shell associates a job with
each pipeline. It keeps a table of current jobs, printed by the jobs command, and assigns them
small integer numbers. When a job is started asynchronously with &amp;, the shell prints a line that
looks like:
[1] 1234
This line indicates that the job, which was started asynchronously, was job number 1 and had one
(top-level) process, whose process ID was 1234.
If you are running a job and want to do something else, you can enter the Suspend key sequence
(normally &lt;Ctrl-z&gt;), which sends a SIGTSTP signal to the current job. The shell then normally
indicates that the job has been stopped, and it prints another prompt. You can then manipulate
the state of this job, putting it in the background with the bg command, or run some other commands and then eventually bring the job back into the foreground with the foreground command
fg. The job suspension takes effect immediately, and corresponds to the Interrupt key sequence
in that pending output and unread input are discarded. A special key sequence, &lt;Ctrl-y&gt;, does
not generate a SIGTSTP signal until a program attempts to read it. (See the read(2) reference
page for more information.) This key sequence can usefully be typed ahead when you have
prepared some commands for a job that you wish to stop after it has read them.
527188-024
Hewlett Packard Enterprise
5−21
ksh(1)
OSS Shell and Utilities Reference Manual
A job being run in the background will stop if it tries to read from the terminal. Background jobs
are normally allowed to produce output, but this can be disabled by issuing the stty tostop command. If you set this tty option, then background jobs will stop when they try to produce output
like they do when they try to read input.
There are several ways to refer to jobs in the shell. A job can be referred to by the process ID of
any process of the job, or by one of the following:
%job_number
The job with the given number.
%string Any job whose command line begins with string.
%?string
Any job whose command line contains string.
%%
Current job.
%+
Equivalent to %%.
%-
Previous job.
This shell knows immediately whenever a process changes state. It normally informs you whenever a job becomes blocked so that no further progress is possible, but only just before it prints a
prompt. This is done so that it does not otherwise disturb your work.
When the monitor mode is on, each background job that is completed triggers any trap set for
CHLD.
When you try to leave the shell while jobs are stopped or running, you are warned that You
have stopped(running) jobs. You can use the jobs command to see what they are. If you
do this or immediately try to exit again, the shell does not warn you a second time, and the
stopped jobs are terminated.
Signals
The SIGINT and SIGQUIT signals for an invoked command are ignored if the command is followed by &amp; and job monitor option is not active. Otherwise, signals have the values inherited
by the shell from its parent (but see also the trap command).
Execution
Each time a command is executed, the previous substitutions are carried out. If the command
name matches one of the shell built-in commands it is executed within the current shell process.
Next, the command name is checked to see if it matches one of the user-defined functions. If it
does, the positional parameters are saved and then reset to the arguments of the function call.
When the function is completed or issues a return, the positional parameter list is restored and
any trap set on EXIT within the function is executed. The value of a function is the value of the
last command executed. A function is also executed in the current shell process. If a command
name is not a special command or a user-defined function, a process is created and an attempt is
made to execute the command via exec.
The PATH shell parameter defines the search path for the directory containing the command.
Alternative directory names are separated by a : (colon). The default path is /usr/bin: (specifying /usr/bin, and the current directory in that order). The current directory can be specified by
two or more adjacent colons, or by a colon at the beginning or end of the path list. If the command name contains a / (slash), then the search path is not used. Otherwise, each directory in the
path is searched for an executable file.
If the file has execute permission but is not a directory or an a.out file, it is assumed to be a file
containing shell commands. A subshell is spawned to read it. All nonexported aliases, functions,
and named parameters are removed in this case. If the shell command file does not have read
5−22
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
ksh(1)
permission, or if the setuid and/or setgid bits are set on the file, the shell executes an agent
whose job it is to set up the permissions and execute the shell with the shell command file passed
down as an open file. A command in parentheses is executed in a subshell without the removal
of nonexported quantities.
Command Reentry
The text of the last HISTSIZE (default 128) commands entered from a terminal device is saved
in a history file. The $HOME/.sh_history file is used if the HISTFILE variable is not set or is
not writable. A shell can access the commands of all interactive shells that use the same named
HISTFILE. The fc special command is used to list or edit a portion of this file. The portion of
the file to be edited or listed can be selected by number or by giving the first character or characters of the command. A single command or range of commands can be specified. If you do not
specify an editor program as an argument to fc, then the value of the FCEDIT parameter is used.
If FCEDIT is not defined, then /usr/bin/ed is used. The edited commands are printed and reexecuted upon leaving the editor. The editor name - (dash) is used to skip the editing phase and to
reexecute the command. In this case, a substitution parameter of the form old=new can be used
to modify the command before execution. For example, if r is aliased to ’fc -e -’, then typing ‘r
bad=good c’ reexecutes the most recent command, which starts with the letter c, replacing the
first occurrence of the string bad with the string good.
Inline Editing Options
Normally, each command line entered from a terminal device is simply typed followed by a newline character (&lt;Return&gt; or linefeed). If the vi option is active, you can edit the command line.
To be in this edit mode, set the corresponding option. An editing option is automatically selected
each time the VISUAL or EDITOR variable is assigned a value ending in the option name.
The editing features require that the terminal accept &lt;Return&gt; as carriage-return without
linefeed and that a space must overwrite the current character on the screen. ADM terminal
users should set the space-advance switch to Space. Hewlett-Packard series 2621 terminal users
should set the straps to bcGHxZ etX.
The editing modes create the impression that the user is looking through a window at the current
line. The window width is the value of COLUMNS if it is defined, otherwise it is 80 bytes. If
the line is longer than the window width minus 2, a mark is displayed at the end of the window to
notify the user. As the cursor moves and reaches the window boundaries, the window will be
centered about the cursor. The mark is a &gt; (right angle bracket) if the line extends on the right
side of the window, a &lt; (left angle bracket) if the line extends on the left side of the window, and
an * (asterisk) if the line extends on both sides of the window.
The search commands in each edit mode provide access to the history file. Only strings are
matched, not patterns, although if the leading character in the string is a ˆ (circumflex), the match
is restricted to begin at the first character in the line.
The vi Editing Mode
There are two typing modes. Initially, when you enter a command you are in the input mode. To
edit, the user enters control mode by typing &lt;Esc&gt; (ASCII 033) and moves the cursor to the
place needing correction and then inserts or deletes characters or words as needed. Most control
commands accept an optional repeat count prior to the command. When in vi mode on most systems, canonical processing is initially enabled and the commands are echoed again if the speed is
1200 baud or greater, if it contains any control characters, or if less than 1 second has elapsed
since the prompt was printed. The Escape character terminates canonical processing for the
remainder of the command and the user can then modify the command line.
This scheme of using two typing nodes has the advantages of canonical processing with the
type-ahead echoing of raw mode. If the option viraw is also set, the terminal always has canonical processing disabled. This mode is implicit for systems that do not support two alternative
End-of-Line delimiters, and can be helpful for certain terminals.
527188-024
Hewlett Packard Enterprise
5−23
ksh(1)
OSS Shell and Utilities Reference Manual
Input Edit Commands
By default the editor is in input mode.
Erase
(User-defined Erase character as defined by the stty command, often &lt;Ctrl-h&gt; or #.)
Deletes the previous character.
&lt;Ctrl-w&gt;
Deletes the previous space-separated word.
&lt;Ctrl-d&gt;
Terminates the shell (at the beginning of a line only).
&lt;Ctrl-v&gt;
Escapes the next character. Editing characters and the user’s Erase or Kill characters
can be entered in a command line or in a search string if preceded by a &lt;Ctrl-v&gt;.
&lt;Ctrl-v&gt; removes the next character’s editing features (if any).
\
Escapes the next Erase or Kill character.
Motion Edit Commands
These commands move the cursor:
[count]l Cursor forward (right) one character.
[count]w Cursor forward one word. A word is a string of characters delimited by spaces or tabs.
[count]W
Cursor to the beginning of the next word that follows a space.
[count]e Cursor to the end of the word.
[count]E Cursor to end of the current space-delimited word.
[count]h Cursor backward (left) one character.
[count]b Cursor backward one word.
[count]B Cursor to the preceding space-delimited word.
[count]| Cursor to the column count.
[count]fc Finds the next character c in the current line.
[count]Fc
Finds the previous character c in the current line.
[count]tc Equivalent to f followed by h.
[count]Tc
Equivalent to F followed by l.
[count]; Repeats count times, the last single character find command: f, F, t, or T.
[count], Reverses the last single character find command count times.
0
5−24
Cursor to the start of the line.
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
ksh(1)
^
Cursor to the first nonspace character in the line.
$
Cursor to the end of the line.
Search Edit Commands
These commands access your command history.
[count]k Fetches the previous command. Each time k is entered, the previous command back in
time is accessed.
[count]- Equivalent to k.
[count]j Fetches the next command. Each time j is entered, the next command forward in time
is accessed.
[count]+ Equivalent to j.
[count]G Fetches the command number count. The default is the least recent history command.
/string
Searches backward through history for a previous command containing the specified
string. string is terminated by &lt;Return&gt; or a newline character. If the specified string
is preceded by a ˆ (circumflex), the matched line must begin with string. If string is
null, the previous string is used.
?string
Same as / (slash) except that the search is in the forward direction.
n
Searches for next match of the last pattern to the / or ? commands.
N
Searches for next match of the last pattern to the / or ? commands, but in reverse direction. Searches the command history for the string entered by the previous / command.
Text Modification Edit Commands
These commands modify the line.
a
Enters input mode and enters text after the current character.
A
Appends text to the end of the line. Equivalent to $a.
[count]cmotion
c[count]motion
Deletes the current character through the character to which motion would move the
cursor, and enters input mode. If motion is c, the entire line is deleted and input mode
is entered.
C
Deletes the current character through the end of line, and enters input mode.
Equivalent to c$.
S
Equivalent to cc.
D
Deletes the current character through the end of line. Equivalent to d$.
[count]dmotion
d[count]motion
Deletes the current character through the character to which motion would move. If
motion is d, the entire line is deleted.
527188-024
Hewlett Packard Enterprise
5−25
ksh(1)
OSS Shell and Utilities Reference Manual
i
Enters input mode and inserts text before the current character.
I
Inserts text before the beginning of the line. Equivalent to 0i.
[count]P Places the previous text modification before the cursor.
[count]p Places the previous text modification after the cursor.
R
Enters input mode and replaces characters on the screen with the characters you type,
overlay fashion.
[count]rc
Replaces the count characters, starting at the current cursor position with c and advancing the cursor.
[count]x Deletes the current character.
[count]X Deletes the preceding character.
[count]. Repeats the previous text modification command.
[count]˜ Inverts the case of the count characters, starting at the current cursor position and
advancing the cursor.
[count]_ Causes the count word of the previous command to be appended and input mode
entered. The last word is used if count is omitted.
*
Causes an * (asterisk) to be appended to the current word and filename generation to be
attempted. If no match is found, it sounds the bell. Otherwise, the word is replaced by
the matching pattern and input mode is entered.
\
Filename completion. Replaces the current word with the longest common prefix of all
filenames matching the current word with an * (asterisk) appended. If the match is
unique, a / (slash) is appended if the file is a directory; a space is appended if the file is
not a directory.
Miscellaneous vi Commands
[count]ymotion
y[count]motion
Yanks the current character through the character to which motion would move the cursor and puts the characters into the delete buffer. The text and cursor are unchanged.
Y
Yanks from current position to the end of line. Equivalent to y$.
u
Undoes the last text-modifying command.
U
Undoes all the text-modifying commands performed on the line.
[count]v Returns the command fc -e vi count in the input buffer. If count is omitted, the current
line is used.
&lt;Ctrl-l&gt; Performs a linefeed and prints the current line. Effective only in control mode.
&lt;Ctrl-j&gt; Executes the current line, regardless of mode (newline).
&lt;Ctrl-m&gt;
Executes the current line, regardless of mode (enter).
5−26
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
ksh(1)
#
Sends the line after inserting a # (number sign) in front of the line. Useful for causing
the current line to be inserted in the history without being executed.
=
Lists the filenames that match the current word if an * (asterisk) is appended to it.
@@@@letter
Searches the alias list for an alias by the name _letter . If an alias of this name is
defined, its value is inserted in the input queue for processing.
Special sh Commands
Shell built-in commands are executed by the OSS shell and run entirely within the shell process.
A subshell process is not created for shell built-in commands as it is for a command that is not a
shell built-in command.
The following shell built-in commands also have counterparts that are regular OSS commands
having the same names:
echo.1
kill.1
pwd.1
read.1
The shell built-in command is the default. To run the regular version of a command (instead of
the shell built-in version) specify the command as follows:
/bin/command_name
To make the regular version the default, create an alias to the regular version.
The shell built-in version and the regular version of a command may not behave the same way or
have the same flags.
The shell commands described below are executed in the shell process. Input/output redirection
is permitted.
DESCRIPTION
:[argument ...]
The command only expands arguments. It is used when a command is needed, as in
the then condition of an if command, but nothing is to be done by the command.
Parameter assignment lists that precede the command remain in effect when the command completes.
I/O redirections are processed after parameter assignments.
Errors cause a script that contains the commands so marked to abort.
. file [argument ...]
Reads the complete file and executes the commands. The commands are executed in
the current shell environment. The search path specified by PATH is used to find the
directory containing file. Unlike normal command search, however, the file searched
for by the . command need not be executable. If any arguments are specified, they
become the positional parameters. Otherwise, the positional parameters are
unchanged. If no readable file is found, a noninteractive shell aborts; an interactive
shell writes a diagnostic message to standard error, but this condition is not considered
a syntax error. The exit status is the exit status of the last command executed, or a 0
(zero) if no command is executed.
Parameter assignment lists that precede the command remain in effect when the command completes.
527188-024
Hewlett Packard Enterprise
5−27
ksh(1)
OSS Shell and Utilities Reference Manual
I/O redirections are processed after parameter assignments.
Errors cause a script that contains the commands so marked to abort.
add_define
Creates DEFINEs for the Guardian environment. An Hewlett Packard Enterprise
extension.
alias
Creates or lists aliases.
bg
Puts each specified job into the background.
break
Exits from the enclosing for, while, until, or select loop.
cd
Changes the current directory.
continue
Resumes the next iteration of the enclosing for, while, until, or select loop.
del_define
Deletes DEFINEs from the current shell process. An Hewlett Packard Enterprise
extension.
echo
Sends the string given as an argument to the standard output.
eval
Reads arguments as input to the shell and executes arguments as commands.
exec
Executes commands specified as arguments
exit
Causes the shell to exit.
export
Marks names automatic export to the shell environment.
fc
Lists or edits and reexecutes commands previously entered to an interactive shell.
fg
Moves processes into the foreground.
getopts Checks argument for legal options.
hash
Affects the way the shell remembers the locations of utilities.
history
Lists the contents of the history file, which contains a list of previously executed commands.
info_define
Displays information about DEFINEs. An Hewlett Packard Enterprise extension.
5−28
jobs
Lists information about jobs.
kill
Sends either the TERM signal or the specified signal to the specified jobs or processes.
let
Evaluates arguments as arithmetic expressions.
print
The shell output mechanism; prints arguments to standard output as described for echo.
pwd
Prints the current working directory to standard output.
read
The shell input mechanism.
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
ksh(1)
readonly
The variable names given as arguments are marked read only. These names cannot be
changed by subsequent assignment.
reset_define
Restores the attributes of a DEFINE to their original settings. An Hewlett Packard
Enterprise extension.
return
Causes a shell function to return to the invoking script.
set
Sets parameters.
set_define
Sets the values for DEFINE attributes. An Hewlett Packard Enterprise extension.
shift
Renames positional parameters.
show_define
Displays values of DEFINE attributes. An Hewlett Packard Enterprise extension.
times
Prints the accumulated user and system times for the shell and for processes run from
the shell.
trap
Defines variables to be read and executed when the shell receives the specified signals.
type
Returns the location of commands.
typeset
Sets attributes and values for shell parameters.
umask
Sets the user file-creation mask to mask.
unalias Removes alias definions.
unset
Erases values assigned to variables.
wait
Waits for the specified process and reports its termination status.
whence Indicates how names would be interpreted if used as commands.
Invocation
If the shell is invoked by exec, and the first character of argument zero ($0) is - (dash), the shell
is assumed to be a login shell and commands are read from /etc/profile and then from either
.profile in the current directory or $HOME/.profile, if either file exists. Next, commands are
read from the file named by performing parameter substitution on the value of the ENV environment variable, if the file exists. If the -s flag is not present and argument is present, a path search
is performed on the first argument to determine the name of the script to execute. The script
argument must have read permission and any setuid and getgid settings are ignored. Commands
are then read, as described in the following text.
See the FLAGS section for a complete description of flags that can be interpreted by the shell
when it is invoked.
FILES
/etc/profile
System profile.
$HOME/.profile
User profile.
527188-024
Hewlett Packard Enterprise
5−29
ksh(1)
OSS Shell and Utilities Reference Manual
NOTES
1.
If a command is executed, and a command with the same name is installed in a directory
in the search path before the directory where the original command was found, the shell
will execute the original command. Use the hash command to correct this situation.
2.
When the shell encounters the &gt;&gt; characters, it does not open the file in append mode;
instead, the shell opens the file for writing and seeks to the end.
3.
Failure (nonzero exit status) of a special command preceding a || symbol prevents the list
following || from executing.
4.
If a command that is a tracked alias is executed, and then a command with the same
name is installed in a directory in the search path before the directory where the original
command was found, the shell continues to exec the original command. Use the -t flag
of the alias command to correct this situation.
5.
Using the fc built-in command within a compound command causes the whole command
to disappear from the history file.
6.
The built-in .file command reads the whole file before any commands are executed.
Therefore, the alias and unalias commands in the file do not apply to any functions
defined in the file.
7.
Traps are not processed while a job is waiting for a foreground process. Thus, a trap on
CHLD is not executed until the foreground job terminates.
8.
The shell displays the following progress message if it needs to retry the fork operation
during an attempt at process creation:
sh: Resource temporarily unavailable....
will retry fork() for MAX 62 secs...
If the indicated time passes before the fork operation is successful, the shell returns the
following message:
/bin/-sh:
sh: tdm_fork() failed with errno EAGAIN:
cannot fork too many processes
EXIT VALUES
Errors detected by the shell, such as syntax errors, cause the shell to return a nonzero exit status.
Otherwise, the shell returns the exit status of the last command executed. (See also the exit command, described previously.) If the shell is being used noninteractively, execution of the shell
file is abandoned. Run-time errors detected by the shell are reported by printing the command or
function name and the error condition. If the line number that the error occurred on is greater
than 1, the line number is also printed in [ ] (brackets) after the command or function name.
RELATED INFORMATION
Commands: cd(1), chmod(1), echo(1), env(1), setacl(1), sh(1), stty(1), test(1), umask(1), vi(1).
Functions: exec(2), fcntl(2), fork(2), ioctl(2), lseek(2), pipe(2), rand(3), umask(2), ulimit(3),
wait(2).
Files: locale(4).
Miscellaneous topics: acl(5).
5−30
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
ksh(1)
STANDARDS CONFORMANCE
The following commands are Hewlett Packard Enterprise extensions to the shell built-in commands of the XPG4 Version 2 specification. They are described in detail in their own reference
pages:
add_define
Creates DEFINEs for the Guardian environment.
del_define
Deletes DEFINEs from the current shell process.
info_define
Displays information about DEFINEs.
reset_define
Restores the attributes of a DEFINE to their original settings.
set_define
Sets the values for DEFINE attributes.
show_define
Displays values of DEFINE attributes.
527188-024
Hewlett Packard Enterprise
5−31
ld(1)
OSS Shell and Utilities Reference Manual
NAME
ld - Runs the TNS/R native linker utility for position-independent code
SYNOPSIS
ld
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
5−32
-allow_duplicate_procs ]
-allow_missing_libs ]
-allow_multiple_mains ]
-ansistreams ]
-bdllsonly ]
-bdynamic ]
-bglobalized ]
-blocalized ]
-bstatic ]
-bsymbolic | -bsemi_globalized ]
-call_shared ]
-change attribute_name attribute_value
filename3 ]
-d address1 ]
-dll | -shared ]
{ -dllname | -soname } DLL_name ]
-e symbol_name1 ]
-export symbol_name2 ]
-export_all ]
-export_not symbol_name3 ]
-first_l pathname1 ]
{ -fl | -obey } filename5 ]
-include_whole | -no_include_whole ]
{ -l | -lib } filename6 ]
{ -L | -libvol } pathname2 ]
-libname Guardian_filename ]
-limit_runtime_paths ]
-m | -map ]
-no_optional_lib | -optional_lib ]
-no_preset ]
-no_reexport | -reexport ]
-nostdfiles | -no_stdfiles ]
-nostdlib | -no_stdlib ]
-noverbose | -no_verbose ]
-o filename7 ]
-rld_l path_list1 ]
-rld_first_l path_list2 ]
-s ]
-set attribute_name attribute_value ]
-show_multiple_defs ]
-stdin ]
-strip filename9 ]
-t address2 ]
-temp_o filename10 ]
-u symbol_name4 ]
-ul ]
-unres_symbols { error | ignore | warn } ]
-verbose ]
-warn ]
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
ld(1)
[ -y symbol_name5 ]
[ filename13 ] ...
FLAGS
-allow_duplicate_procs
Tells ld to unconditionally accept multiple copies of a procedure. The only
check made is that all copies of the procedure have the same procedure attributes; for example, it is acceptable if they have different sizes. The first copy of
the duplicated procedure is the one that is kept. When building an executable
file, no space is allocated for the unused copies.
The default action is to accept multiple copies of only procedures specifically
marked as duplicatable by C++.
You can specify this flag as often as you want in the command line or an obey
file. Each specification is processed when encountered.
-allow_missing_libs
Tells ld not to stop processing when it cannot find an archive or a dynamic-link
library (DLL) after searching for the name specified by a -l or -lib flag. Instead,
a warning message is issued and processing continues.
You can specify this flag as often as you want in the command line or an obey
file. Each specification is processed when encountered.
The default action when a needed DLL or archive cannot be found is to stop processing.
-allow_multiple_mains
Directs ld not to issue an error message if more than one procedure has the
MAIN attribute. All main procedures are included in the output file. Only the
first procedure having the MAIN attribute is listed as the main entry point in the
file header.
The default action is to stop processing and report an error when more than one
procedure has the MAIN attribute.
You can specify this flag as often as you want in the command line or an obey
file. Each specification is processed when encountered.
-ansistreams
Specifies that C run-time library functions create files of file code 180 (C text as
binary) instead of file code 101 (EDIT). The type of files created can also be set
with the ANSISTREAMS C and C++ compiler pragma.
You can specify this flag as often as you want in the command line or an obey
file. Each specification is processed when encountered.
See the C/C++ Programmer’s Guide for more information.
-bdllsonly
Tells ld to limit searches to DLLs when resolving the file names specified for the
-l and -lib flags.
If a file name is qualified, ld searches for a DLL with that name.
If a filename is unqualified, in each search path, ld first searches for a DLL with
the file name as specified in the -l or -lib flag. If ld cannot find a DLL, the file
name is unqualified, and the search path is not in the Guardian file system (/G),
then ld prefixes lib and suffixes .so to the file name and searches again. If ld still
cannot find the DLL, it searches the path again with the same prefix but with .srl
as the suffix. For more information on search paths, see the Finding Libraries
subsection of this reference page under DESCRIPTION.
527188-024
Hewlett Packard Enterprise
5−33
ld(1)
OSS Shell and Utilities Reference Manual
When a DLL cannot be found, ld issues an error message unless the
-allow_missing_libs flag is specified.
The -bdllsonly, -bdynamic, and -bstatic flags are search control toggles. Multiple flags can be specified in a single ld invocation; the behavior specified
remains in effect until another flag in the set is specified. Thus, you can search
for both DLLs and archive files for some -l and -lib flags and search for just
archive files for others. The default library search control is -bdynamic.
-bdynamic
Directs ld to search for DLLs and archive files when resolving the file names
specified for the -l and -lib flags.
If a file name is qualified, ld searches for a DLL or archive with that name.
If a filename is unqualified, in each search path, ld first searches for a DLL or
archive with the file name as specified in the -l or -lib flag. If ld cannot find a
DLL or archive, the file name is unqualified, and the search path is not in the
Guardian file system (/G), then ld prefixes lib and suffixes .so to the file name
and searches again. If ld still cannot find the DLL or archive, it searches the path
again with the same prefix but with .srl as the suffix. If ld still cannot find the
DLL or archive, it searches the path again with the same prefix but with .a as the
suffix. For more information on search paths, see the Finding Libraries subsection of this reference page under DESCRIPTION.
When a DLL or archive cannot be found, ld issues an error message unless the
-allow_missing_libs flag is specified.
The -bdllsonly, -bdynamic, and -bstatic flags are search control toggles. Multiple flags can be specified in a single ld invocation; the behavior specified
remains in effect until another flag in the set is specified. Thus, you can search
for both DLLs and archive files for some -l and -lib flags and search for just
archive files for others. The default library search control is -bdynamic.
-bglobalized
Directs ld to use the following sequence as its linker searchList when resolving
the file names specified for the -l and -lib flags:
•
•
At link time:
1.
Libraries on the libList
2.
Breadth-first transitive closure of DLLs on the libList
3.
Implicit libraries
At load time:
1.
Libraries on the libList
2.
Breadth-first transitive closure of DLLs on the libList
3.
Loader loadList (libraries loaded by the program or libraries that
caused this loadfile to be loaded; this list is built from the
program’s and libraries’ libList and a breadth-first transitive closure of the libList-specified libraries)
4.
Implicit libraries
A filename that is either a relative OSS pathname or a Guardian filename that is
not qualified is found using search path lists, as described in the Finding
Libraries subsection of this reference page under DESCRIPTION.
5−34
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
ld(1)
You cannot use this flag when you use the -blocalized, -bsemi_localized, or
-bsymbolic flag. The default action is the action for the -blocalized flag.
-blocalized
Directs ld to use the following sequence as its linker searchList when resolving
the filenames specified for the -l and -lib flags:
1.
Loadfile itself
2.
Libraries on the libList
3.
Breadth-first transitive closure of re-exported libList-specified DLLs
4.
Implicit libraries
This is the default ld action.
A filename that is either a relative OSS pathname or a Guardian filename that is
not qualified is found using search path lists, as described in the Finding
Libraries subsection of this reference page under DESCRIPTION.
You cannot use this flag when you use the -bglobalized, -bsemi_localized, or
-bsymbolic flag.
-bstatic
Directs ld to search for archive files when resolving the file names specified for
the -l and -lib flags.
If a file name is qualified, ld searches for an archive with that name.
If a filename is unqualified, in each search path, ld first searches for an archive
with the file name as specified in the -l or -lib flag). If ld cannot find an archive,
the file name is unqualified, and the search path is not in the Guardian file system
(/G), then ld prefixes lib and suffixes .a to the file name and searches again. For
more information on search paths, see the Finding Libraries subsection of this
reference page under DESCRIPTION.
When an archive cannot be found, ld issues an error message unless the
-allow_missing_libs flag is specified.
The -bdllsonly, -bdynamic, and -bstatic flags are search control toggles. Multiple flags can be specified in a single ld invocation; the behavior specified
remains in effect until another flag in the set is specified. Thus, you can search
for both DLLs and archive files for some -l and -lib flags and search for just
archive files for others. The default library search control is -bdynamic.
-bsymbolic | -bsemi_globalized
Directs ld to use the following sequence as its linker searchList when resolving
the file names specified for the -l and -lib flags:
•
527188-024
At link time:
1.
Loadfile itself
2.
Libraries on the libList
3.
Breadth-first transitive closure of DLLs on the libList
4.
Implicit libraries
Hewlett Packard Enterprise
5−35
ld(1)
OSS Shell and Utilities Reference Manual
•
At load time:
1.
Loadfile itself
2.
Libraries on the libList
3.
Breadth-first transitive closure of DLLs on the libList
4.
Loader loadList (libraries loaded by the program or libraries that
caused this loadfile to be loaded; this list is built from the
program’s and libraries’ libList and a breadth-first transitive closure of the libList-specified libraries)
5.
Implicit libraries
A filename that is either a relative OSS pathname or a Guardian filename that is
not qualified is found using search path lists, as described in the Finding
Libraries subsection of this reference page under DESCRIPTION.
You cannot use this flag when you use the -bglobalized or -blocalized flag. The
default action is the action for the -blocalized flag.
-call_shared
Tells ld to mark the linkfile specified by filename13 as the loadfile for a program.
This is the default ld action.
You cannot use this flag when you use the -dll or -shared flag.
-change attribute_name attribute_value filename3
Changes the value of the run-time attribute specified in attribute_name to the
value specified in attribute_value in the existing file specified by filename3.
For a linkfile, you can only change the values for FLOATTYPE,
FLOAT_LIB_OVERRULE, and SYSTYPE.
You can use the -set flag to set an attribute when creating a loadfile. See the -set
flag for a description of attribute_name and attribute_value.
You cannot specify other loadfile filenames or flags other than the following with
the -change flag:
-noverbose, -verbose, or -warn
-fl or -obey
-stdin
The resulting loadfile has the same ld timestamp as before.
-d address1
Specifies the hexadecimal virtual address at which the data area starts. When
creating a program file, the default value for address1 is 08000000. When creating a DLL, the default value is set to the next multiple of 16384 (0x4000) bytes
after the end of the text area.
The value specified for address1 is always hexadecimal and can optionally be
prefixed by 0x. The specified value is automatically rounded up to a multiple of
4096 (0x1000) bytes.
If you use this flag, you must also use the -t flag. If you use this flag with the -dll
or -shared flag, the value of address1 must be the next available address modulo
16384 after the text area in the DLL.
Hewlett Packard Enterprise recommends against using this flag when creating a
DLL.
5−36
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
-dll | -shared
ld(1)
Tells ld to mark the loadfile specified by filename7 as a PIC DLL. When you
specify the -dll or -shared flag, the exported symbols are those exported by the
-export_all or -export flags, or those marked by the compiler to be exported.
Any symbols specified by the -export_not flag are not exported.
You cannot use this flag when you use the -call_shared flag. The default action
is the action for the -call_shared flag.
You can specify this flag as often as you want in the command line or an obey
file. Each specification is processed when encountered.
{-dllname | -soname } DLL_name
Tells ld the DLL name to store in the DLL being created. When this DLL is
specified in the link step of another loadfile, the DLL name stored in this DLL is
placed in the libList of the loadfile for later use by rld when searching for DLLs.
If the DLL being created will reside in the Guardian file system, DLL_name must
conform to Guardian filename rules. If the DLL being created will reside in the
OSS file system, DLL_name must conform to OSS pathname rules. To reside in
either file system, DLL_name must be an unqualified Guardian file identifier.
If you specify both a DLL_name and the -o flag, the output loadfile filename is
determined by the -o specification and DLL_name is saved in the DLL being
created.
If you specify DLL_name but do not use the -o flag, the output loadfile filename
uses the DLL_name value.
If you do not specify DLL_name but use the -o flag, the output loadfile filename
is used as the DLL name stored in the DLL being created. Only the unqualified
part (rightmost part) of the output filename is used.
If you omit both a DLL_name and the -o flag, the output loadfile filename and
DLL_name in the libList both default to a.out. Hewlett Packard Enterprise
recommends against using this default value.
-e symbol_name1
Specifies a function identifier. The specified function is the entry point, that is,
the point at which to begin executing the program when the program is loaded.
You should use this flag only when linking a program that will execute without
standard run-time support facilities and without linking a module such as
CCPPMAIN (in the Guardian file system) or ccppmain.o (in the OSS file system) that contains a function with the MAIN attribute. Do not use this flag for
libraries.
-export symbol_name2
Tells ld to mark symbol_name2 for export in the output loadfile in addition to
those normally marked. This flag can be used with the -export_not flag to create
sets of symbols to be exported.
symbol_name2 cannot be the same symbol as symbol_name3.
The default action is to export only those symbols marked by a compiler as
requiring export.
-export_all
Tells ld to mark for export in the output loadfile all symbols in the external symbol table that are not one of the following:
•
527188-024
multiext
Hewlett Packard Enterprise
5−37
ld(1)
OSS Shell and Utilities Reference Manual
•
starting with __sti__ (global constructors), __std__ (global destructors),
__INIT__ (initialization functions), or __TERM__ (termination functions)
This flag can be used with the -export_not flag to create a subset of symbols to
be exported.
The default action when the -ul flag is not used is to export only those symbols
marked by a compiler as requiring export.
You can specify this flag as often as you want in the command line or an obey
file. Each specification is processed when encountered.
-export_not symbol_name3
Tells ld not to mark symbol_name3 for export in the output loadfile. This flag
can be used with the -export_all flag to create sets of symbols to be exported.
symbol_name3 cannot be the same symbol as symbol_name2.
The default action is to export all symbols marked by a compiler as requiring
export.
-first_l pathname1
Tells ld to use the specified pathname when searching for libraries. pathname1
is used in library searches before the public libraries are searched.
You cannot embed spaces (blanks) in pathname1. A pathname can be either a
relative or absolute OSS directory pathname or an unqualified, partially
qualified, or fully qualified Guardian subvolume name.
The -first_l flag can be specified more than once in a command line or an obey
file.
See the Finding Libraries subsection under DESCRIPTION for details about
the effect of this flag on search order.
{-fl | -obey } filename5
Specifies the name of an ld command file containing ld command tokens (such
as filenames and command flag specifications).
filename5 is a C text file. Tokens can be separated by spaces, tabs, or ends of
lines. Tokens can contain double quotation marks (&quot;) to group items into a single string, consistent with OSS shell usage. Within the command file, two
hyphens indicate a comment that extends to the end of the current line. Command files can be nested; there is no limit to the depth of nesting. Recursive
nesting does not cause an error; ld does not read a command file invoked by
itself.
You can specify this flag as often as you want in the command line or an obey
file. Each specification is processed when encountered.
-include_whole | -no_include_whole
Tells ld whether to include in the loadfile all linkable archive members of all
archive libraries encountered after this flag is specified.
Specifying -include_whole begins this linking action. When
-no_include_whole behavior is in effect, archive searches are controlled by the
existence of undefined symbols. Archives are searched in the order specified on
the command line. Symbols are marked as undefined by compilers or by the user
through the -u flag. When an archive member is found that resolves an
undefined symbol, the member&acute;s symbols are merged into the external symbol
5−38
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
ld(1)
table for the loadfile being created. After the merge, the undefined symbol that
triggered the merge is resolved (marked as defined). The same merge might
resolve other undefined symbols or result in more undefined symbols.
You can stop the linking action of -include_whole by specifying the
-no_include_whole flag later in the command line or obey file.
These flags can be specified as many times as needed in the command stream.
Providing either flag overrides the current setting, so that the linker actions can
be controlled on a library-by-library basis.
The default setting is -no_include_whole.
{ -l | -lib } filename6
Specifies the name of a DLL or archive file to use to resolve external references
from the executable file being linked. The -l flag must be specified in lowercase
type, and the space after the flag and before filename6 is optional. -l is a
synonym for -lib.
Other flags affect how filename6 is used. See the Finding Libraries subsection
under DESCRIPTION for details.
{ -L | -libvol } pathname2
Specifies a pathname to search for a DLL or archive file specified by a simple
filename in an -l or -lib flag. A simple filename is an OSS pathname without any
directory components. The -L flag must be specified in uppercase type, and the
space after the flag and before pathname2 is optional. -libvol is a synonym for
-L and the space before pathname2 is required.
Other flags affect how pathname2 is used. See the Finding Libraries subsection
under DESCRIPTION for details.
ld does not verify the names of locations specified in -L or -libvol flags. If you
specify the -verbose flag, ld writes to its output listing the locations where it
found a DLL or archive file.
-libname Guardian_filename
Associates a DLL as a native user library with an executable native program file.
You can associate a native user library to a program loadfile. The -set and
-change flags can also associate a native user library with an executable native
program.
The value specified for Guardian_filename cannot be the Guardian name of an
OSS file.
-limit_runtime_paths
Tells ld to mark the loadfile so that rld will omit certain locations when searching for DLLs or archives to resolve symbols. See Finding Libraries in the
DESCRIPTION section of this reference page for more information.
The default action is to search all locations described in Finding Libraries.
You can specify this flag as often as you want in the command line or an obey
file. Each specification is processed when encountered.
-m | -map
Tells ld to produce a memory map of the PIC program or DLL being created.
The default behavior does not produce a memory map.
You can specify this flag as often as you want in the command line or an obey
file. Each specification is processed when encountered.
527188-024
Hewlett Packard Enterprise
5−39
ld(1)
OSS Shell and Utilities Reference Manual
-no_optional_lib | -optional_lib
Specifies whether a library specified in the command line or obey file should be
considered optional when creating a loadfile.
When -no_optional_lib behavior is in effect, any library specified in a -l or -lib
flag is included in the .liblist section of the loadfile being created. When
-optional_lib behavior is in effect, a specified library can be omitted from the
.liblist section of the loadfile being created if omitting it would not affect how
symbolic references are resolved.
These flags can be specified as many times as needed in the command stream.
Providing either flag overrides the current setting, so that the linker actions can
be controlled on a library-by-library basis.
If a library is specified more than once, and at least one specification occurs
when -no_optional_lib is in effect, the library is included in the .liblist section
of the loadfile being created.
The default behavior is -no_optional_lib.
-no_reexport | -reexport
Tells ld whether to mark any library specified in a -l or -lib flag after this flag for
reexport in its libList entry in the loadfile being created. Specifying
-no_reexport leaves the library unmarked; specifying -reexport marks the
library. Reexport is a run-time attribute that is used by rld to decide what DLLs
it needs to load.
-no_reexport is the default action.
These flags can be specified as many times as needed in the command stream.
Providing either flag overrides the current setting, so that the linker actions can
be controlled on a library-by-library basis.
-nostdfiles | -no_stdfiles
Specifies that C run-time library functions do not automatically open the standard input and standard output files.
-nostdlib | -no_stdlib
Prevents ld from searching the standard library locations for DLLs and archive
files.
You can specify these flags as often as you want in the command line or an obey
file. Each specification is processed when encountered.
-noverbose | -no_verbose
Prevents ld from writing warning and informational messages to its output listing. Only error messages and output specifically requested by other options
appears in the listing.
The default value is -no_verbose.
You can specify the flags -warn, -verbose, -noverbose, and -no_verbose as
often as you want in the command line or an obey file. The value used is the
final value entered.
-o filename7
Specifies the filename of the output loadfile.
filename7 can be the same as the input file name. When this is true and linking is
successful, ld deletes the input file and then writes the output file. An error
occurs if you do not have permission to delete the input file.
If you do not specify a -o flag, the default output loadfile filename depends on
5−40
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
ld(1)
whether a -dllname or -soname flag is specified. filename7 can also become the
DLL name used for the file in the libList. See the description of the -dllname
flag in this reference page for more information.
-rld_l path_list1
Tells ld to set search paths in the loadfile for later use by the rld loader.
path_list1 identifies paths to be searched after using the loadfile location and
before using the rld default locations.
path_list1 contains one or more pathname entries, separated by a colon (:); you
cannot embed spaces (blanks) in path_list1. A pathname can be either an absolute OSS directory pathname or a fully qualified Guardian subvolume name.
The -rld_l flag can be specified more than once in a command line or an obey
file. Multiple path_list1 specifications are concatenated into a single loadfile
entry.
See the Finding Libraries subsection under DESCRIPTION for details about
the effect of this flag on search order.
-rld_first_l path_list2
Tells ld to set search paths in the loadfile for later use by the rld loader.
path_list2 identifies paths to be searched after using the location specified by
-first_l and before using the public libraries.
path_list2 contains one or more pathname entries, separated by a colon (:); you
cannot embed spaces (blanks) in path_list2. A pathname can be either an absolute OSS directory pathname or a fully qualified Guardian subvolume name.
The -rld_first_l flag can be specified more than once in a command line or an
obey file. Multiple path_list2 specifications are concatenated into a single
loadfile entry.
See the Finding Libraries subsection under DESCRIPTION for details about
the effect of this flag on search order.
-s
Removes symbol information used for linking and symbolic debugging from the
output loadfile. A file stripped of all symbol information cannot be symbolically
debugged with the Visual Inspect debugger.
You can use this flag only when creating a loadfile. To strip all symbol information from an existing loadfile, use the -strip flag.
You can specify this flag as often as you want in the command line or an obey
file. Each specification is processed when encountered.
-set attribute_name attribute_value
Sets the value of the run-time attribute specified in attribute_name to the value
specified in attribute_value when creating a loadfile. Use the -change flag to
change a run-time attribute in an existing loadfile.
Each attribute_name has a corresponding range of accepted attribute_values as
follows:
•
527188-024
FLOAT_LIB_OVERRULE is either ON or OFF. The default value is
OFF. (A FLOAT_TYPE_OVERRULE value of ON is ignored for
library loadfiles; this attribute only has meaning for program loadfiles.)
Hewlett Packard Enterprise
5−41
ld(1)
OSS Shell and Utilities Reference Manual
•
FLOATTYPE is one of the following:
IEEE_FLOAT
NEUTRAL_FLOAT
TANDEM_FLOAT
If FLOATTYPE is not specified, the value used comes from the input
linkfile. If FLOATTYPE is specified more than once, all occurrences
except the final one are ignored.
•
HEAP_MAX, MAINSTACK_MAX, [PROCESS_]SUBTYPE, and
SPACE_GUARANTEE are unsigned numbers. The default value is 0
(zero).
•
HIGHPIN, HIGHREQUESTER[S] or HIGHREQUESTOR[S], and
INSPECT are either ON or OFF. The default value is ON.
•
LIBNAME is the Guardian filename of a library file, specified as
described for the -libname flag. The default value is none.
•
RUNNAMED and SAVEABEND are either ON or OFF. The default
value is OFF.
•
RLD_UNRESOLVED is ERROR, IGNORE, or WARN. The default
value is ERROR.
•
SYSTYPE is either OSS or GUARDIAN. The default value is determined by the file system that contains the output file. For users of this
reference page, the default value is probably OSS. (If the output loadfile
is created in the Guardian file system through the /G directory, the
default is GUARDIAN.)
See the ld Manual for a description of each run-time attribute.
-show_multiple_defs
Tells ld to produce a listing of any symbols with multiple definitions within the
input linkfiles.
The default action does not display instances of multiple definitions.
You can specify this flag as often as you want in the command line or an obey
file. Each specification is processed when encountered.
-stdin
Reads the contents of the standard input file at the place in the command line
where the flag is specified.
You can specify this flag as often as you want in the command line or an obey
file. Each specification is processed when encountered.
-strip filename9
Removes symbol information used for linking and symbolic debugging from an
existing loadfile with the name filename9. A file stripped of all symbol information cannot be symbolically debugged with the Visual Inspect debugger or
linked again.
You can use this flag only on an existing loadfile. To strip all symbol information when creating a loadfile, use the -s flag.
You cannot specify other loadfile filenames or flags other than the following with
the -strip flag:
-noverbose, -verbose, or -warn
5−42
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
ld(1)
-fl or -obey
-stdin
The resulting file has the same ld timestamp as before.
-t address2
Specifies the hexadecimal virtual address at which the text area starts. The
default value for address2 is:
•
70000000 for user programs
•
60000000 for a DLL
The value specified for address2 is always hexadecimal and can optionally be
prefixed by 0x. The specified value is automatically rounded up to a multiple of
4096 (0x1000) bytes.
-temp_o filename10
Tells ld to save its output loadfile work with the specified file name until it has
successfully rewritten filename7.
filename10 can be either a simple filename, a fully qualified Guardian filename,
or an absolute OSS pathname. If a simple filename is used, ld saves the file in
the directory or subvolume where filename7 is located.
The default action omits creation of the intermediate regular file.
-u symbol_name4
Tells ld to add symbol_name4 as an undefined symbol. This causes ld to search
for this symbol in any archive libraries that are specified after this flag on the
command line or in an obey file.
The search constraint specified by the -u flag is overridden by use of the
-include_whole flag.
-ul
Creates a DLL as a native user library. Specify this flag when linking modules
to create a DLL as a native user library.
When you specify the -ul flag, the exported symbols are those described as
exported by the -export_all flag, unless you also use the -export_not flag.
You can specify these flags as often as you want in the command line or an obey
file. Each specification is processed when encountered.
-unres_symbols { error | ignore | warn }
Tells ld what action to take when a needed symbol cannot be resolved:
error
Issue an error message and stop processing.
This setting is ignored when you also use the
-allow_missing_libs flag.
ignore
Ignore the missing file and continue processing.
This is the default action.
warn
Issue a warning message but continue processing.
This setting is ignored when you also use the
-allow_missing_libs flag.
You can specify this flag as often as you want in the command line or an obey
file. The final specification is the one used.
527188-024
Hewlett Packard Enterprise
5−43
ld(1)
OSS Shell and Utilities Reference Manual
-verbose
Directs ld to write error, warning, and informational messages to its output listing, along with output specified by other options.
The default value is -no_verbose.
You can specify the flags -warn, -verbose, -noverbose, and -no_verbose as
often as you want in the command line or an obey file. The value used is the
final value entered.
-warn
Directs ld to write only error and warning messages to its output listing, along
with output specified by other options.
You can specify the flags -warn, -verbose, -noverbose, and -no_verbose as
often as you want in the command line or an obey file. The default value is no_verbose. The value used is the final value entered.
-y symbol_name5
Tells ld to report which linkfiles define and use the symbol symbol_name5. The
linkfiles are listed in the order encountered.
This information can be useful if a previous ld session produced error or warning
messages about a symbol being either undefined or defined more than once.
Operands
filename13
Specifies one or more loadfiles or DLLs for the ld utility to link. This operand is
required for all flags except the -change and -strip flags. In the OSS environment, the value specified must be a valid OSS pathname.
DESCRIPTION
The ld utility links one or more TNS/R native position-independent code (PIC) linkfiles to produce an executable or nonexecutable native PIC loadfile. You can also modify existing loadfiles
using ld.
You can invoke ld directly or, if you are creating a C or C++ program, you can use the c89 utility
to invoke ld automatically for you. On the command line, the filenames are the names of input
linkfiles or archives. Names of flags must be followed by spaces and are not case-sensitive,
except for the -l and -L flags.
If no flags or operands are used, the ld command displays online help.
Saving Temporary Files
ld creates temporary working files while it processes command line or obey file information.
These temporary working files are given names of the form ZLDNFnnn, where:
nnn
is a unique sequentially assigned decimal number, beginning with 000.
To create a final permanent file with the same name as an existing loadfile, ld must first remove
the existing file. If ld processing is interrupted during the process of removing and recreating the
output loadfile, all work can be lost.
The -temp_o flag allows you to save the completed working file as a temporary regular file with
a known filename before the original loadfile is removed. The temporary file is itself removed
after the final permanent loadfile is completely written.
Finding Libraries
The OSS version of ld searches for libraries in the following locations when resolving the values
specified for the -l and -lib flags:
1.
5−44
Locations specified by the current -first_l flag
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
ld(1)
2.
Public libraries (installed by the system operator) * **
3.
Locations specified by the current -libvol and -L flags
4.
Default locations in the OSS environment:
/lib:/usr/lib:/usr/local/lib:/G/SYSTEM/ZDLL *
The value of the COMP_ROOT environment variable is added to the beginning of /lib,
/usr/lib, and /usr/local/lib. By default, the value of COMP_ROOT is null in the OSS
environment.
5.
Default locations in the Guardian environment: $SYSTEM.ZDLL * **
The steps marked by an asterisk (*) are skipped when the -nostdlib or -no_stdlib flag is in effect,
and the steps marked by two asterisks (**) are skipped only when the -bstatic flag is used.
Archive libraries encountered in steps marked by ** are reported as errors.
ld searches in each location for libraries by file name, based upon whether the specified file name
is a simple name. (A simple name is an OSS pathname without any directory components.) If
the specified file name is not a simple name, ld tries to open the specified file.
If the specified filename is a simple name, ld tries to open the specified file; if it cannot, it
modifies the supplied value and tries to open a file with the modified name. (Simple names
specified in the Guardian file system, /G, are not modified; ld uses only the supplied value.) The
prefix lib and the following suffixes are added to the specified name to create the modified name:
.so
To find a DLL, unless the -bstatic flag is in effect
.srl
To find a shared runtime library (SRL), unless the -bstatic flag is in effect
.a
To find an archive file, unless the -dllsonly flag is in effect
The OSS version of rld searches for DLLs and archive files in the following locations:
1.
Locations specified by the current -rld_first_l flag
2.
Public libraries (installed by the system operator)
3.
Program location *
4.
Locations specified by the current -rld_l flag
5.
Default locations:
On OSS: /lib:/usr/lib:/usr/local/lib:/G/SYSTEM/ZDLL
On Guardian: $SYSTEM.ZDLL *
The value of the COMP_ROOT environment variable is added to the beginning of /lib,
/usr/lib, and /usr/local/lib. By default, the value of COMP_ROOT is null in the OSS
environment.
When the -limit_runtime_paths flag has been used for the loadfile, the following are omitted
from the search:
527188-024
•
The steps marked by an asterisk (*) in the previously described search order
•
Paths indicated by the TACL DEFINEs _RLD_FIRST_LIB_PATH and
_RLD_LIB_PATH.
Hewlett Packard Enterprise
5−45
ld(1)
OSS Shell and Utilities Reference Manual
For More Information
ld is not an interactive tool like Binder. For more information on using ld, see the ld Manual.
For more informaiton on run-time library use, see the rld Manual.
EXAMPLES
1.
The following example:
ld objecta objectb -o objectc
links together the input linkfiles named objecta and objectb to create a loadfile named
objectc.
2.
The following example:
ld -dll -dllname objecta -o objectb objectc
creates a DLL named objecta as the loadfile named objectb from the linkfile named
objectc.
3.
The following example:
ld obj1.o obj2.o -ul -o lib
links the linkfiles named obj1.o and obj2.o together into a user library named lib.
4.
The following example:
ld obj3.o obj4.o -o prog -libname \$A.B.C
links linkfiles named obj3.o and obj4.o together into a loadfile named prog. When prog
runs, it has a user library with the Guardian name $A.B.C. The backslash (\) prevents the
shell from misinterpreting the dollar sign ($).
5.
The following example:
ld /usr/lib/ccppmain.o test1.o test2.o \
-obey /usr/lib/libc.obey -o prog
links the C linkfiles test1.o and test2.o to build a loadfile named prog. Because the program is a C program, the ccppmain.o library linkfile is required. The -obey flag directs
ld to link in all the required hybrid SRLs.
6.
The following example:
ld obj6.o obj7.o -o prog -set systype guardian
links the linkfiles named obj6.o and obj7.o into a loadfile named prog that you intend to
run as a Guardian process.
7.
The following example:
ld -change highpin off exeobj
changes the value of the HIGHPIN attribute in the loadfile exeobj to OFF.
NOTES
OSS filenames intended for use with ld should not begin with an equals (=) character. The
equals character is reserved for use with MAP DEFINEs.
EXIT VALUES
The ld command returns one of the following values:
0 (zero)
5−46
No errors or warning conditions were detected.
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
ld(1)
1
One or more warning conditions were detected.
2
One or more general errors were detected.
3
A fatal error was detected.
RELATED INFORMATION
Commands: c89(1), nld(1), noft(1).
Files: float(4).
STANDARDS CONFORMANCE
The ld command is an Hewlett Packard Enterprise extension to the Single UNIX Version 2
specification and performs functions comparable to the UNIX ld command.
527188-024
Hewlett Packard Enterprise
5−47
let(1)
OSS Shell and Utilities Reference Manual
NAME
let - Evaluates arithmetic expressions
SYNOPSIS
let argument ...
DESCRIPTION
The let command evaluates each argument as a separate arithmetic expression. (See Arithmetic
Evaluation in the reference page for sh.1 for a description of arithmetic expression evaluation.)
EXIT VALUES
The exit status is 0 (zero) if the value of the last expression is nonzero, and 1 otherwise.
EXAMPLES
The statement let x=y+z is equivalent to the statement (x=y+z).
NOTES
The let command is a shell built-in command. It differs from the regular commands in that it does
not open a new shell process when it executes.
A general discussion of shell built-in commands and a list of the OSS shell built-in commands
are in the reference page for sh(1).
RELATED INFORMATION
Commands: sh(1).
5−48
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
lex(1)
NAME
lex - Generates a C language lexical analyzer
SYNOPSIS
lex [-bcdfinpstvFILT8] -C[efmF] [-Sskeleton] [file ...]
FLAGS
-b
Generates backtracking information to file lex.backtrack. This is a list of scanner
states that require backtracking and the input characters on which they backtrack. By
adding rules, you can remove backtracking states. If all backtracking states are eliminated and the -f or -F flag is used, the generated scanner will run faster.
-d
Makes the generated scanner run in debug mode. Whenever a pattern is recognized
and the global yy_lex_debug is nonzero (which is the default value), the scanner writes
to the standard error file a line of the form:
--accepting rule at line 53 (&quot;the matched text&quot;)
The line number refers to the location of the rule in the file defining the scanner (the
input to the lex command). Messages are also generated when the scanner backtracks,
accepts the default rule, reaches the end of its input buffer (or encounters a NULL), or
reaches an End-of-File.
-f
Specifies full table (no table compression is done). The result is large but fast. This
flag is equivalent to -Cf.
-i
Instructs the lex command to generate a case-insensitive scanner. The case of letters
given in the lex input patterns is ignored, and tokens in the input are matched regardless of case. The matched text given in the yytext variable will have the original case
(as read by the scanner).
-p
Generates a performance report to the standard error file. This identifies features of the
lex input file that will cause a loss of performance in the resulting scanner.
-s
Causes the default rule (that unmatched scanner input is echoed to the standard output
file to be suppressed. If the scanner encounters input that does not match any of its
rules, it aborts with an error.
-t
Instructs the lex command to write the scanner it generates to the standard output file
instead of to the file lex.yy.c.
-v
Specifies that the lex command should write to the standard error file a summary of
statistics regarding the scanner it generates.
-F
Specifies that the fast scanner table representation should be used. This representation
is about as fast as the full table representation (the -f flag), and for some sets of patterns
it will be considerably smaller (and for others, larger). This flag is equivalent to the CF flag.
-I
Instructs the lex command to generate an interactive scanner; that is, a scanner that
stops immediately rather than looking ahead if it knows that the currently scanned text
cannot be part of a longer rule’s match. Note that the -I flag cannot be used with full or
fast tables; that is, with the -f, -F, -Cf, or -CF flags.
-L
Instructs the lex command not to generate #line directives in the file lex.yy.c. The
default action is to generate such directives so error messages in the actions will be
correctly located with respect to the original lex input files.
527188-024
Hewlett Packard Enterprise
5−49
lex(1)
OSS Shell and Utilities Reference Manual
-T
Makes the lex command run in trace mode. It generates a lot of messages to the standard output file concerning the form of the input and the resultant nondeterministic and
deterministic finite automata. This flag is mostly for use in maintaining the lex command.
-8
Instructs the lex command to generate an 8-bit scanner (the default scanner is a 7-bit
scanner).
-C[efmF]
Controls the degree of table compression. The default setting is -Cem, which provides
the highest degree of table compression. Faster-executing scanners can be traded off at
the cost of larger tables with the following generally being true:
Slowest and smallest
-Cem
-Cm
-Ce
-C
-C{f,F}e
-C{f,F}
Fastest and largest
-C flags are not cumulative; whenever the flag is encountered, the previous -C settings
are forgotten. The -f or -F and -Cm flags do not make sense together; there is no
opportunity for meta-equivalence classes if the table is not being compressed. Otherwise, the flags may be freely mixed.
5−50
-C
Specifies that the scanner tables should be compressed and neither
equivalence classes nor meta-equivalence classes should be used.
-Ce
Directs the lex command to construct equivalence classes; for example, sets of characters that have identical lexical properties.
Equivalence classes usually give dramatic reductions in the final
table/object file sizes (typically a factor of 2 to 5) and are inexpensive
in terms of cost versus performance (one array look-up per character
scanned).
-Cm
Directs the lex command to construct meta-equivalence classes, which
are sets of equivalence classes (or characters, if equivalence classes
are not being used) that are commonly used together. Metaequivalence classes are often a benefit when using compressed tables,
but they have a moderate performance impact (one or two &quot;if&quot; tests
and one array look-up per character scanned).
-Cf
Specifies that the full scanner tables should be generated; the lex command should not compress the tables by taking advantage of similar
transition functions for different states.
-CF
Specifies that the alternative fast scanner representation should be
used.
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
lex(1)
-Sskeleton
Overrides the default skeleton file from which the lex command constructs its scanners.
This is useful for lex maintenance or development.
-c
Specifies table-compression options. (Obsolescent)
-n
Suppresses the statistics summaries that the -v flag typically generates. (Obsolescent.)
DESCRIPTION
The lex and flex commands have the same functionality.
The lex command is a tool for generating scanners: programs that recognize lexical patterns in
text. lex reads the given input files, or its standard input file if no filenames are given or if a file
operand is - (dash), for a description of a scanner to generate. The description is in the form of
pairs of regular expressions and C code, called rules. lex generates as output a C source file,
named lex.yy.c, which defines a routine yylex(). This file is compiled and linked with the -ll
library to produce an executable. When the executable is run, it scans its input and the regular
expressions in its rules looking for the best match (longest input). When it has selected a rule it
executes the associated C code, which has access to the matched input sequence (commonly
referred to as a token). This process then repeats until input is exhausted.
lex treats multiple input files as one.
Syntax for lex Input
This subsection contains a description of the lex input files, which are normally named with a .l
suffix. It provides a listing of the special values, macros, and functions recognized by the lex
command.
The lex input file consists of three sections, separated by a line with just %% in it:
[ definitions ]
%%
[ rules ]
[ %%
[ user_functions ] ]
where
definitions
Contains declarations to simplify the scanner specification and declarations of
start states, which are explained below.
rules
Describes what the scanner is to do.
user_functions Contains user-supplied functions, which are copied directly to file lex.yy.c.
With the exception of the first %% sequence, all sections are optional. The minimal scanner,
%%, copies its input to the standard output file.
Each line in the definitions section can be:
name regexp
Defines name to expand to regexp. name is a word beginning with a letter or an
underscore ( |*L_ ) followed by zero or more letters, digits, underscores, or
dashes ( - ). In the regular-expression parts of the rules section, the command
substitutes regexp wherever you refer to {name} (name within braces).
%x state [ state ... ] or %s state [ state ... ]
Defines names for states used in the rules section. A rule can be made conditionally active based on the current scanner state. Multiple lines defining states can
appear, and each can contain multiple state names, separated by white space.
The name of a state follows the same syntax as that of regexp names except that
527188-024
Hewlett Packard Enterprise
5−51
lex(1)
OSS Shell and Utilities Reference Manual
dashes ( - ) are not permitted. Unlike regexp names, state names share the C
#define namespace. In the rules section, states are recognized as &lt;state&gt; (state
within angle brackets).
The %x directive names exclusive states. When a scanner is in an exclusive
state, only rules prefixed with that state are active. Inclusive states are named
with the %s directive.
%{ or %}
When placed on lines by themselves, enclose C code to be passed verbatim into
the global definitions of the output file. Such lines commonly include preprocessor directives and declarations of external variables and functions.
space or tab
Appear at the beginning of lines in the definitions section that are to be passed
directly into the lex.yy.c output file, as part of the initial global definitions.
The rules section follows the definitions, separated by a line consisting of %%. The rules section contains rules for matching input and taking actions, in the following format:
pattern [ action ]
pattern starts in the first column of the line and extends until the first nonescaped white space
character. The command attempts to find the pattern that matches the longest input sequence
and execute the associated action. If two or more patterns match the same input, the one that
appears first in the rules section is chosen. If no action exists, the matched input is discarded. If
no pattern matches the input, the default action is to copy it to the standard output file.
All action code is placed in the yylex() function. Text (C code or declarations) placed at the
beginning of the rules section is copied to the beginning of the yylex() function and can be used
in actions. This text must begin with a space or a tab (to distinguish it from rules). In addition,
any input (beginning with a space or within %{ and %} delimiter lines) appearing at the beginning of the rules section before any rules are specified is written to file lex.yy.c after the declarations of variables for the yylex( ) function and before the first line of code in yylex( ).
Elements of each rule are:
state
A pattern can begin with a comma-separated list of state names enclosed by
angle brackets (&lt; state [,state...] &gt;). These states are entered through the BEGIN
statement. If a pattern begins with a state, the scanner can recognize it only
when in that state. The initial state is 0 (zero).
regexp
A pattern can be a regular expression to match against the input stream. The
regular expressions in the lex command provides a rich character-matching syntax.
The following characters, shown in order of decreasing precedence, have special
meanings:
x
Matches the character x.
&quot;&quot; (double quotes)
Enclose characters and treat them as literal strings. For example, &quot;*+&quot;
is treated as the asterisk character followed by the plus character.
\str (backslash)
If str is one of the characters a, b, f, n, r, t, or v, then represents the
ANSI C interpretation (for example, \n is a newline). If str is a string
of octal digits, it is interpreted as a character with octal value str. If str
is a string of hexadecimal digits with a leading x, it is interpreted as a
character with that value. Otherwise, it is interpreted literally with no
5−52
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
lex(1)
special meaning. For example, x\*yz represents the four characters
x*yz.
[ ] (brackets)
Represent a character class in the enclosed range ([.-.]) or the enclosed
list ([...]). The dash character ( - ) is used to define a range of characters
from the ASCII value or the 8-bit class of the character that comes
before the dash to the ASCII value or the 8-bit class of the character
that follows the dash. For example, [abcx-z] matches a, b, c, x, y, or z.
The circumflex ( ˆ ), when it appears as the first character in a character
class, indicates the complement of the set of characters within that
class. For example, [ ˆabc] matches any character except a, b, or c,
including special characters like newline. Similarly, [ ˆa-zA-Z] is any
character that is not a letter.
( ) (parentheses)
Group regular expressions. For example, (ab) is considered as a single
regular expression.
{ } (braces)
When enclosing numbers, indicate a number of consecutive
occurrences of the expression that comes before it. For example,
(ab){1,5} indicates a match for from 1 to 5 occurrences of the string
ab.
When enclosing a name, the name represents a regular expression
defined in the definitions section. For example, {digit} will be replaced
with the defined regular expression for digit. Note that the expansion
takes place as if the definition were enclosed in parentheses.
. (dot)
Matches any single character except newline.
? (question mark)
Matches zero or one of the preceding expressions. For example, ab?c
matches both ac and abc.
* (asterisk)
Matches zero or more of the preceding expressions. For example, a* is
zero or more consecutive a characters. The utility of matching zero
occurrences is more obvious in complicated expressions. For example,
the expression [A-Za-z][A-Za-z0-9]* indicates all alphanumeric
strings with a leading alphabetic character, including strings that are
only one alphabetic character.
+ (plus sign)
Matches one or more of the preceding expressions. For example,
[a-z]+ is all strings of lowercase letters.
xy (concatenation)
Matches the expression x followed by the expression y.
(vertical bar)
Matches either the preceding expression or the following expression.
For example, abcd matches either ab or cd.
527188-024
Hewlett Packard Enterprise
5−53
lex(1)
OSS Shell and Utilities Reference Manual
x/y (slash)
Matches expression x only if expression y (trailing context) immediately follows it. For example, ab/cd matches the string ab but only if
followed by cd. Only one trailing context is permitted per pattern.
^ (circumflex)
When it appears at the beginning of the pattern, matches the beginning
of a line. For example, ˆabc matches the string abc if it is found at the
beginning of a line.
$ (dollar sign)
When it appears at the end of a pattern, matches the end of a line. It is
equivalent to /\n. For example, abc$ matches the string abc if it is
found at the end of a line.
&lt;&lt;EOF&gt;&gt;
Matches an End-of-File.
&lt;x&gt; (angle bracket)
Identifies a state name (see earlier description of state) and can appear
only at the beginning of a pattern. For example, &lt;done&gt;&lt;&lt;EOF&gt;&gt;
matches an End-of-File, but only if it is in the state done.
In addition, the following rules apply for bracket expressions:
Equivalence class expressions
These represent the set of collating elements in an equivalence
class and are enclosed within bracket-equal delimiters ( [= =] ).
An equivalence class generally is designed to deal with
primary-secondary sorting; that is, for languages like French that
define groups of characters as sorting to the same primary location, and then have a tie-breaking, secondary sort. For example,
if a, &agrave; (a accent grave), and &acirc; (a circumflex) belong to the same
equivalence class, then [[=a=]b], [[=&agrave;=]b], and [[=&acirc;=]b] are
each equivalent to [a&agrave;&acirc;b].
NOTE: If you are viewing this reference page online using the
man command, the special characters are not displayed. See this
reference page in the Open System Services Shell and Utilities
Reference Manual.
Character class expressions
These represent the set of characters in the current locale
belonging to the named ctype class. These are expressed as a
ctype class name enclosed in bracket-colon delimiters ([: :]).
In the C or OSS locale, the following character class expressions
are supported: [:alpha:], [:upper:], [:lower:], [:digit:],
[:alnum:], [:xdigit:], [:space:], [:print:], [:punct:], [:graph:],
and [:cntrl:].
Other locales may define additional character classes.
Letters and digits never have special meanings. A character such as ˆ or -, which
has a special meaning in particular contexts, refers simply to itself when found
outside that context. Spaces and tabs must be escaped to appear in a regular
expression; otherwise they indicate the end of the expression.
5−54
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
action
lex(1)
Each pattern in a rule has a corresponding action, which can be any arbitrary C
statement. The pattern ends at the first nonescaped white space character; the
remainder of the line is its action. If the action is empty, then when the pattern is
matched, the input that matched it is discarded.
If the action contains a {, then the action scans till the balancing } is found, and
the action may cross multiple lines. Using a return statement in an action
returns from yylex().
An action consisting solely of a vertical bar (|) means same as the action for the
next rule.
lex variable that can be used within actions are:
yytext
Is a string (char *) containing the current matched input. It
cannot be modified.
yyleng
Is the length (int) of the current matched input. It cannot be
modified.
yyin
Is a stream (FILE *) that the lex command reads from the
standard input file by default. It can be changed, but because
of the buffering lex uses, changing the stream makes sense
only before scanning begins. Once scanning terminates
because an End-of-File was found, void yyrestart (FILE
*new_file) can be called to point yyin at a new input file.
Alternatively, yyin can be changed whenever a new or
different buffer is selected (see yy_switch_to_buffer()).
yyout
Is a stream (FILE *) to which ECHO output is written (the
standard output file by default). It can be changed by the user.
YY_CURRENT_BUFFER
Returns the current buffer (YY_BUFFER_STATE) used for
scanner input.
lex macros and functions that can be used within actions are:
ECHO
Copies the yytext variable to the scanner’s output.
BEGIN state
Changes the scanner state to be state. This affects which rules are
active. The state must be defined in a %s or %x definition. The initial state of the scanner is INITIAL or 0 (zero).
REJECT
Directs the scanner to proceed immediately to the next best pattern
that matches the input (which may be a prefix of the current match).
The yytext and yyleng variables are reset appropriately. Note that
REJECT is a particularly expensive feature in terms of scanner performance; if it is used in any of the scanner’s actions, it slows down
all the scanner’s pattern matching operations. REJECT cannot be
used if the command is invoked with either the -f or -F flag.
yymore( ) Indicates that the next matched text should be appended to the
currently matched text in the yytext variable (rather than replace it).
527188-024
Hewlett Packard Enterprise
5−55
lex(1)
OSS Shell and Utilities Reference Manual
yyless(n)
Returns all but the first n characters of the current token back to the
input stream, where they are rescanned when the scanner looks for
the next match. The yytext and yyleng variables are adjusted
accordingly.
yywrap( ) Returns 0 (zero) if there is more input to scan or 1 if there is not.
The default yywrap( ) always returns 1. It is implemented as a
macro.
yyterminate( )
Can be used instead of a return statement in an action. It terminates
the scanner and returns a 0 (zero) to the scanner’s caller.
yyterminate() is automatically called when an End-of-File is
encountered. It is a macro and can be redefined.
yy_create_buffer(file, size)
Returns a YY_BUFFER_STATE handle to a new input buffer large
enough to accommodate size characters and associated with the
given file. When in doubt, use YY_BUF_SIZE for the size.
yy_switch_to_buffer(new_buffer)
Switches the scanner’s processing to scan for tokens from the given
buffer, which must be a YY_BUFFER_STATE.
yy_delete_buffer(buffer)
Deletes the given buffer.
YY_NEW_FILE
Enables scanning to continue after the yyin variable has been
assigned a new file to process.
YY_DECL Controls how the scanning function, yylex( ), is declared. By
default, it is int yylex( ) or, if prototypes are being used, int
yylex(void). This definition can be changed by redefining the
YY_DECL macro. This macro is expanded immediately before the
{...} (braces) that delimit the scanner function body.
YY_INPUT(buf,result,max_size)
Controls scanner input. By default, YY_INPUT reads from the
file-pointer yyin variable. Its action is to place up to max_size characters in the character array buf and return in the integer variable
result either the number of characters read or the constant
YY_NULL to indicate EOF. Following is a sample redefinition of
YY_INPUT, in the definitions section of the input file:
%{
#undef YY_INPUT
#define YY_INPUT(buf,result,max_size)\
{\
int c = getchar();\
result = (c == EOF) ? YY_NULL : (buf[0] = c, 1);\
}
%}
When the scanner receives an End-of-File indication from
YY_INPUT, it checks the yywrap( ) function. If yywrap( ) returns
5−56
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
lex(1)
zero, it is assumed that the yyin has been set up to point to another
input file, and scanning continues. If it returns a nonzero value, then
the scanner terminates, returning zero to its caller.
YY_USER_ACTION
Can be redefined to provide an action that is always executed prior
to the matched pattern’s action.
YY _USER_INIT
Can be redefined to provide an action that is always executed before
the first scan.
YY_BREAK
Is used in the scanner to separate different actions. By default, it is
simply a break, but it can be redefined if necessary.
The user_functions section consists of complete C functions, which are passed directly into the
lex.y.cc output file (the effect is similar to defining the functions in separate .c files and linking
them with lex.y.cc). This section is separated from the rules section by the %% delimiter.
Comments, in C syntax, can appear anywhere in the user_functions or definitions sections. In the
rules section, comments can be embedded within actions. Empty lines or lines consisting of
white space are ignored.
The following macros are not normally called explicitly within an action, but they are used internally by the lex command to handle the input and output streams.
input( )
Reads the next character from the input stream. You cannot redefine input( ).
output( )
Writes the next character to the output stream.
unput(c)
Puts the character c back into the input stream. It will be the next character
scanned. You cannot redefine unput( ).
libl.a contains default functions to support testing or quick use of a lex program without the yacc
command; these functions can be linked in through -ll. They can also be provided by the user.
main( )
A simple wrapper that simply calls setlocale( ) and then calls the yylex( ) function.
yywrap( )
The function called when the scanner reaches the end of an input stream. The
default definition simply returns 1, which causes the scanner in turn to return 0
(zero).
EXAMPLES
1.
The following command processes the file lexcommands to produce the scanner file
lex.yy.c:
lex lexcommands
This is then compiled and linked by the command:
cc -oscanner lex.yy.c -ll
to produce a program scanner.
527188-024
Hewlett Packard Enterprise
5−57
lex(1)
OSS Shell and Utilities Reference Manual
2.
The scanner program converts uppercase to lowercase letters, removes spaces at the end
of a line, and replaces multiple spaces with single spaces. The lexcommands file contains:
%%
[A-Z]
putchar(tolower(yytext[0]));
[ ]+$
[ ]+ putchar(’ ’);
FILES
NOTES
flex.skel
Is the skeleton scanner.
lex.yy.c
Is the generated scanner C source.
lex.backtrack
Contains backtracking information generated from the -b flag.
•
Some trailing context patterns cannot be properly matched and generate warning messages:
Dangerous trailing context
These are patterns where the ending of the first part of the rule matches the beginning of
the second part, such as zx*/xy*, where the x* matches the x at the beginning of the trailing context.
•
For some trailing context rules, parts that are actually fixed length are not recognized as
such, leading to the previously mentioned performance loss. In particular, patterns using
{n} (such as test{3}) are always considered variable length.
Combining trailing context with the special | (vertical bar) action can result in fixed trailing context being turned into the more expensive variable trailing context. This happens
in the following example:
%%
abc|
xyz/def
5−58
•
Use of the unput( ) macro invalidates the contents of the yytext and yyleng variables
within the current lex action.
•
Use of the unput( ) macro to push back more text than was matched can result in the
pushed-back text matching a beginning-of-line (ˆ) rule even though it did not come at the
beginning of the line.
•
Pattern matching of NULLs is substantially slower than matching other characters.
•
The lex command does not generate correct #line directives for code internal to the
scanner; thus, bugs in flex.skel yield invalid line numbers.
•
Due to both buffering of input and read-ahead, you cannot intermix calls to &lt;stdio.h&gt;
routines, such as getchar( ), with lex rules and expect it to work. Call input( ) instead.
•
The total table entries listed by the -v flag excludes the number of table entries needed to
determine what rule was matched. The number of entries is equal to the number of deterministic finite-state automaton (DFA) states if the scanner does not use REJECT, and is
somewhat greater than the number of states if it does.
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
•
lex(1)
REJECT cannot be used with the -f or -F flag.
RELATED INFORMATION
Commands: awk(1), flex(1), sed(1), yacc(1).
Files: locale(4).
527188-024
Hewlett Packard Enterprise
5−59
line(1)
OSS Shell and Utilities Reference Manual
NAME
line - Reads one line from the standard input file and copies it to standard output file
SYNOPSIS
line
DESCRIPTION
The line command copies one line up to and including a newline character from the standard
input file and writes it to the standard output file. The line command always writes at least a
newline character.
Use this command within a shell command file to read from your terminal.
EXAMPLES
To read a line entered from the keyboard and append it to a file, enter:
echo ’Enter comments for the log:’
echo ’: \c’
line &gt;&gt;log
This shell procedure displays the message:
Enter comments for the log:
It then reads a line of text entered from the keyboard and adds it to the end of the file log. The
echo ’: \c’ command displays a : (colon) prompt. See the echo command for information about
the \c escape sequence.
NOTES
Applications should use the read command instead of the line command.
EXIT VALUES
The line command returns a value of 1 when it detects an end-of-file; otherwise, the line command returns a value of 0 (zero).
RELATED INFORMATION
Commands: echo(1), ksh(1), sh(1).
Functions: read(2).
STANDARDS CONFORMANCE
This command conforms to the XPG4 Version 2 specification.
5−60
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
ln(1)
NAME
ln - Links files
SYNOPSIS
ln [ -f ] [ -s ] source_file target_file
ln [ -f ] [ -s ] source_file [ ... ] target_directory
FLAGS
-f
Forces removal of existing target pathnames to allow specified links.
-s
Creates symbolic links.
DESCRIPTION
The ln command links a single file source_file to file target_file or links one or more files to the
same filenames in another existing directory (target_directory). If more than two arguments are
specified and the final argument is not a directory, an error results.
By default, ln makes hard links. A hard link can only be created when all of the following are in
the same OSS fileset:
•
source_file
•
target_file or target_directory
•
All directories used for pathname resolution of any of the above
When the -s flag is used, ln makes symbolic links. A symbolic link can be created when
source_file and target_file or target_directory are in different OSS filesets.
If either of the following is true and the -f flag is not specified:
•
target_file exists
•
target_directory contains a file with the same name as a source_file specification
the ln command writes a diagnostic message to the standard error file, does nothing further with
the current source file, and goes on to any remaining source files.
Operands
source_file
Specifies the absolute or relative pathname of the file to which the link should be
made.
The file is found through normal pathname resolution rules. When a component
of the pathname refers to a symbolic link rather than a directory, the pathname
contained in the symbolic link is resolved. If the pathname in the symbolic link
starts with a slash (/) character, the symbolic link pathname is resolved relative
to the root directory of the process. If the pathname in the symbolic link does
not start with a slash (/) character, the symbolic link pathname is resolved relative to the directory that contains the symbolic link.
If the file is not in the same OSS fileset as target_file or target_directory, a hard
link cannot be created. If resolution of the pathname for source_file includes
symbolic links, all of the directories traversed must be in the same OSS fileset as
target_file or target_directory; otherwise, a hard link cannot be created.
target_file
Specifies the relative or absolute pathname to assign to the link.
The resolved pathname for a hard link stores the inode information necessary to
provide access to source_file only within the same OSS fileset. The resolved
pathname for a symbolic link stores the filename for later resolution, regardless
of whether source_file is in the same OSS fileset.
527188-024
Hewlett Packard Enterprise
5−61
ln(1)
OSS Shell and Utilities Reference Manual
The value specified for target_file is resolved using normal pathname resolution
rules. target_file file must be in the same OSS fileset as source_file if you are
trying to create a hard link. If resolution of the pathname for target_file includes
symbolic links, all of the directories traversed must be in the same OSS fileset as
source_file; otherwise, a hard link cannot be created.
target_directory
Specifies the relative or absolute filename of a directory in which links for the
specified source_file values should be created. target_directory must be in the
same OSS fileset as source_file if you are trying to create hard links.
The value specified for target_directory is resolved using normal pathname resolution rules. If resolution includes symbolic links, all of the directories traversed
must be in the same OSS fileset as source_file; otherwise, a hard link cannot be
created.
EXAMPLES
1.
To create a hard link to a file, enter:
ln chap1 intro
This links file chap1 to the new filename intro, if intro does not already exist.
2.
To create the link in Example 1 if intro already exists, enter:
ln -f chap1 intro
Now chap1 and intro are two filenames that refer to the same file. Any changes made to
one also appear in the other. If one name is deleted with the rm command, the file is not
actually deleted but remains under the other name.
3.
To create a hard link for the file named index to the same name in another directory that
has the filename manual, enter:
ln index manual
This links file index to the new name manual/index.
Note that intro in Example 1 is the name of a file; manual in Example 2 is a directory
that already exists.
4.
To create hard links for several files to names in another directory in the same OSS
fileset, enter:
ln chap2 jim/chap3 /u/manual
This links file chap2 to the new name /u/manual/chap2 and file jim/chap3 to
/u/manual/chap3.
5.
To use the ln command with pattern-matching characters, enter:
ln manual/* .
This links all files in the directory manual into the current directory (.), giving them the
same names they have in manual. Note that you must type a space between the * (asterisk) and the . (dot).
5−62
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
6.
ln(1)
To create a symbolic link to the final component of a pathname, enter:
ln -s /a/b/c/d/e
This creates a link, e, in the current directory to the file /a/b/c/d/e.
RELATED INFORMATION
Commands: cp(1), mv(1), rm(1).
STANDARDS CONFORMANCE
The -s flag is an extension to the Single UNIX Specification, Version 2.
527188-024
Hewlett Packard Enterprise
5−63
locale(1)
OSS Shell and Utilities Reference Manual
NAME
locale - Writes information about locales
SYNOPSIS
locale
[-a | -m]
locale
[-c] [-k]
name ...
FLAGS
-a
Writes information about all available public locales
-c
Writes the names of the specified locale categories
-k
Writes the names and values of specified locale keywords
-m
Writes the names of all available character map files
Operands
name
Specifies a locale category or locale keyword
DESCRIPTION
With no flags or arguments, the locale utility writes to the standard output file the name and
values of all the current locale environment variables, such as LANG and LC_COLLATE.
With the -a or -m flags, the locale utility displays information about available locales and character maps on your system.
•
If the -a flag is specified, the locale utility writes the name of all available public locales.
These are locales available to any application.
•
If the -m flag is specified, the locale utility writes a list of the names of all available
character-mapping files.
The locale utility with the name argument displays information about locale categories and keywords in the current locale. For example, it could display information about the decimal_point
keyword in the LC_NUMERIC category or information about all keywords in the
LC_NUMERIC category. The name argument can either be a locale category or a keyword from
a category.
5−64
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
locale(1)
The -c and -k flags determine the information displayed by the locale utility as follows:
Table 5−1. Controlling locale Utility Output
Flags Set Information Displayed
___________________________________________________
None
Value of keyword specified by the name parameter or values of all keywords in the category
specified by the name parameter.
___________________________________________________
-c
Name of category containing the keyword
specified by the name parameter or the name of
the category specified by the name parameter,
followed by value of locale keywords.
___________________________________________________
-k
Name and value of locale keywords.
___________________________________________________
-ck
Name of category, followed by name and value
of locale keywords.
___________________________________________________
The following table lists the locale categories and the locale keywords that can be used in the
name argument. There are no locale keywords for LC_COLLATE and LC_CTYPE.
Table 5−2. Categories and Keywords for the locale Utility
Category
Associated Keywords
_____________________________________
LC_COLLATE
_____________________________________
LC_CTYPE
_____________________________________
CHARMAP
charmap
code_set_name
mb_cur_max
mb_cur_min
_____________________________________
LC_MESSAGES
yesexpr
noexpr
yesstr
nostr
_____________________________________
LC_MONETARY
int_curr_symbol
currency_symbol
mon_decimal_point
mon_grouping
mon_thousands_sep
positive_sign
negative_sign
int_frac_digits
frac_digits
p_cs_precedes
p_sep_by_space
n_cs_precedes
n_sep_by_space
p_sign_posn
n_sign_posn
debit_sign
credit_sign
527188-024
Hewlett Packard Enterprise
5−65
locale(1)
OSS Shell and Utilities Reference Manual
left_parenthesis
right_parenthesis
_____________________________________
LC_NUMERIC
decimal_point
thousands_sep
grouping
_____________________________________
LC_TIME
alt_digits
abday
day
abmon
mon
d_t_fmt
d_fmt
t_fmt
t_fmt_ampm
am_pm
era
era_d_fmt
era_t_fmt
era_d_t_fmt
era_year
_____________________________________
If several name arguments are specified, the locale utility processes them in order.
Environment Variables
The following environment variables affect the execution of locale: LANG, LC_ALL,
LC_CTYPE, LC_MESSAGES, NLSPATH.
EXAMPLES
1.
If you set the LANG environment variable to fr_FR.ISO8859-1 and the
LC_MONETARY environment variable to fr_CA.ISO8859-1, the locale utility entered
without flags produces the following output:
locale
LANG=fr_FR.ISO8859-1
LC_COLLATE=&quot;fr_FR.ISO8859-1&quot;
LC_CTYPE=&quot;fr_FR.ISO8859-1&quot;
LC_MONETARY=&quot;fr_CA.ISO8859-1&quot;
LC_NUMERIC=&quot;fr_FR.ISO8859-1&quot;
LC_TIME=&quot;fr_FR.ISO8859-1&quot;
LC_MESSAGES=&quot;fr_FR.ISO8859-1&quot;
LC_ALL=
Note, however, that when setting the locale environment variables, some values imply
values for other locale variables. For example, if LC_ALL is set to en_US.ISO8859-1, it
implies LC_COLLATE=en_US.ISO8859-1, even if the LC_COLLATE environment
variable is set to another locale.
2.
To use the locale utility to retrieve the value of the decimal_point delimiter for the
current locale, assuming the current locale is C/POSIX, enter:
locale -ck decimal_point
LC_NUMERIC
decimal_point=&quot;.&quot;
5−66
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
locale(1)
DIAGNOSTICS
The locale utility generates these errors:
locale: unrecognized keyword, ’\%s’, in argument list.\n
usage: locale [-amck] keyword ...\n
RELATED INFORMATION
Files: locale(4).
527188-024
Hewlett Packard Enterprise
5−67
logger(1)
OSS Shell and Utilities Reference Manual
NAME
logger - Makes entries in the system log
SYNOPSIS
logger [-f file] [-i] [-p priority] [-t tag] [string ...]
The logger command makes the specified entries in the system log file.
FLAGS
-f file
Logs all lines in file.
-i
Logs the process ID (PID) of the logger process with each line.
-p priority
Enters the message with the specified priority. You can specify priority as a name or a
numeric value. You can also enter a facility/priority pair, separated by a . (dot) character. (See Facilities and Priorities for information about valid values.)
-t tag
Precedes each entry in the log with tag.
DESCRIPTION
The logger program allows information logging for later use by a system administrator or programmer in determining why noninteractive utilities have failed.
Facilities
The logger command provides a program and shell script interface to the syslog( ) subroutine.
The file in which entries are made depends on the current system log configuration; see the reference page for syslog( ) for more information.
You can specify the message to be used for entries on the command line or with the -f file flag,
which specifies that each line in file be logged as an entry, with the string argument. The string
argument consists of one or more character strings separated by spaces. If you do not specify
string or the -f flag, the logger command reads the standard input.
The specific facility names that can be entered as the facility portion of the priority argument to
the -p flag appear in the following list. The corresponding numeric values appear in parentheses.
kern
Kernel messages (0).
user
Random user-level messages (8).
mail
Mail system (16).
daemon System daemons (24).
5−68
auth
Security/authorization messages (32).
syslog
Messages generated internally by the syslogd subroutine (40).
lpr
Line printer subsystem (48).
news
Network news subsystem (56).
uucp
UUCP subsystem (64).
cron
Clock daemon (72).
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
logger(1)
Priorities
The specific priority names that can be entered as the priority portion of the priority argument to
the -p flag appear in the following list. The corresponding numeric values appear in parentheses.
emerg
The system is unusable (0).
alert
Action must be taken immediately (1).
crit
Critical conditions (2).
err
Error conditions (3).
warning Warning conditions (4).
notice
Normal but significant condition (5).
info
Informational (6).
debug
Debug-level messages (7).
EXAMPLES
1.
To specify the debug priority with a priority name, enter:
logger -p debug my message
2.
To specify the debug priority with a priority number, enter:
logger -p 7 my message
3.
To specify both the user facility and the debug priority, enter:
logger -p user.debug my message
4.
To specify the same facility/priority pair using numeric values, enter:
logger -p 8.7 my message
5.
You can also combine alphabetic and numeric specifications:
logger -p user.7 my message
RELATED INFORMATION
Functions: openlog(3), syslog(3).
527188-024
Hewlett Packard Enterprise
5−69
logname(1)
OSS Shell and Utilities Reference Manual
NAME
logname - Displays user login name
SYNOPSIS
logname
DESCRIPTION
The logname command writes to the standard output file the name you used to log in to the system. This name is returned by the getlogin( ) function. Under conditions where getlogin( )
would fail, the logname command writes a diagnostic message to the standard error file and exits
with a nonzero exit value.
Environment Variables
This command supports the use of the LANG, LC_ALL, LC_CTYPE, LC_MESSAGES, and
NLSPATH environment variables.
EXIT VALUES
The logname command returns the following values:
0 (zero)
The command completed successfully.
&gt;0
An error occurred.
RELATED INFORMATION
Commands: env(1).
Functions: getlogin(2).
STANDARDS CONFORMANCE
This command conforms to the XPG4 Version 2 specification with extensions.
5−70
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
lp(1)
NAME
lp - Sends files to a printer
SYNOPSIS
lp
[-c ]
[-d dest ]
[-n copies ]
[-s ]
[-t title ]
[-W save ]
[-W pri=priority ]
[-W spl=spooler_name ]
[file ... ]
FLAGS
Flags for the lp command can appear in any order and can be mixed with filenames.
-c
Copies the input files to the spooling area rather than directly to the printer device.
This is the default action.
-d dest
Specifies dest as the spooler destination for the job. dest can be specified as an alias
that maps to a Guardian spooler location name. Spooler location aliases can be located
in the printcap file in the /etc directory. The lp command checks the printcap file to
resolve name mapping. If the destination name does not map to a physical printer device, the files to be printed are left in the spooling area for further disposition. If the destination name maps to an invalid printer location, lp exits with an error.
The destination name can be set with the environment variables LPDEST and
PRINTER. The -d flag has precedence over LPDEST, which has precedence over
PRINTER. If the -d and -W spl flags are not specified and none of the LPDEST,
PRINTER, or GUARDIAN_PRINTER environment variables are set, the system
default destination in the printcap file is used. The lp command exits with an error if
no valid destination can be found.
-n copies Specifies the number of copies to be printed of each file listed in the lp request. copies
is a number in the range 1 through 32767. When multiple files are to be printed, all
copies of one file are printed before printing of the next file is started. The default
value of copies is 1.
-s
Suppresses messages from the lp command.
-t title
Specifies a report name for the print job, where the argument title is a string of up to 16
alphanumeric characters and blank spaces. The report name is printed on the banner
page of the output. The default report name is the user’s Guardian logon name.
Hewlett Packard Enterprise extensions
-W save Saves the print job in the spooler after it has been printed.
-W pri=priority
Specifies the print request priority. The argument priority is defined as an integer 0
through 8, with 8 being the highest priority. The default value is 4. Normally, requests
with higher priorities are printed before requests with lower priorities.
-W spl=spooler_name
Specifies the Guardian spooler location, which can be a maximum of 40 characters.
Specify the spooler_name parameter as:
527188-024
Hewlett Packard Enterprise
5−71
lp(1)
OSS Shell and Utilities Reference Manual
[\\node.]\$collector[.group[.destination]]
In which:
•
node is the system name
•
$collector is the spooler collector name
•
group and destination are part of the spooler location
You can set the Guardian spooler name with the GUARDIAN_PRINTER environment variable. The -W spl flag has precedence over the LPDEST and PRINTER
environment variables, which have precedence over the GUARDIAN_PRINTER
environment variable. If the -d and -W spl flags are not specified and none of the
LPDEST, PRINTER, or GUARDIAN_PRINTER environment variables are set, the
system default destination in the printcap file is used. If no valid destination can be
found, the lp command exits with an error.
DESCRIPTION
The lp command sends the specified files and associated information (collectively called a
request) to a line printer for printing.
The lp command copies input files to an output printer device through the Guardian spooler subsystem. The system default destination is a printer device or a Guardian spooler location. The
system default destination is configured by the system operator at system startup. If the system
default destination becomes unavailable or if a valid destination cannot be found, the lp command exits with a an error.
Files are always first copied to the spooling area. From there they are sent to the printer. Depending on printer availability, files specified in a print request may not actually be sent to a printer
from the spooling area until after the lp command successfully exits. When a job is sent to the
printer device, each print job has exclusive access to the printer device and cannot be interrupted.
Operands
file
The pathname of a file to be printed. If no file operands are specified, or if a file
operand is specified as a - (hyphen), the standard input file is used. Guardian files are
preceded with the /G naming convention. The lp command must have read permission
to the file or it will return an error.
Standard Input Files
The standard input files can be OSS text files (filecode 180), Guardian EDIT files (filecode 101),
compiler listing files (filecode 129), and PostScript files (filecode 0). Using input files other than
the standard input file may produce unexpected results.
Standard input is used only if no file argument is specified or if file is specified as a - (hyphen).
Environment Variables
GUARDIAN_PRINTER
Specifies the Guardian spooler name. The -W spl flag has precedence over the
LPDEST and PRINTER environment variables, which have precedence over the
GUARDIAN_PRINTER environment variable. If the -d and -W spl flags are not
specified, the LPDEST and PRINTER environment variables are not set, and
GUARDIAN_PRINTER contains a value that is not a valid Guardian spooler name,
the lp command exits with an error.
LANG
5−72
Provides a default value for the internationalization variables that are unset or null. If
the LANG variable is unset or null, the corresponding value from the implementationspecific default locale is used. If any of the internationalization variables contain an
invalid setting, the lp command behaves as if none of the variables have been defined.
Hewlett Packard Enterprise
527188-024
User Commands (k - l)
lp(1)
LC_ALL
When set with a nonempty string, overrides the values of all other internationalization
variables.
LC_CTYPE
Determines the locale for the interpretation of sequences of bytes of text data as characters (for example, single-byte as opposed to multibyte characters in arguments and
input files).
LC_MESSAGES
Determines the locale to be used to affect the format and contents of diagnostic messages written to the standard error file and informative messages written to the standard
output file.
LC_TIME
Determines the format and contents of date and time strings displayed in the lp command banner page.
LPDEST
Names the output device or destination. If LPDEST is not set, the PRINTER environment variable is used. The -d variable takes precedence over LPDEST. If -d is not
specified and LPDEST contains a value that is not a valid destination, the lp command
exits with an error.
NLSPATH
Determines the location of message catalogs for processing the LC_MESSAGES variable.
PRINTER
Names the output device or destination. If the -d and -W spl flags are not specified and
none of the LPDEST, PRINTER, or GUARDIAN_PRINTER environment variables
are set, the system default destination in the printcap file is used. The -d and the
-W spl flags and the LPDEST environment variable have precedence over the
PRINTER environment variable. If the -d and -W spl flags are not specif">
Hej! Jag är en AI-chattbot som är särskilt tränad för att hjälpa dig med HPE Shell and Utilities Referensmanual. Jag har noggrant granskat dokumentet och kan hjälpa dig att hitta den exakta information du behöver eller förklara innehållet på ett tydligt och enkelt sätt. Oavsett om du letar efter vägledning om specifika funktioner, felsökningssteg eller allmän användning, tveka inte att ställa dina frågor. Ju mer detaljer du ger om dina bekymmer eller behov, desto mer exakt och effektivt kan jag hjälpa dig!
Assistent skriver
Assistenten är inte tillgänglig. Försök igen senare.
Det ser ut som att du har kommit till ett dokument som är skrivet på flera språk, inklusive ett som inte är ditt modersmål. Du kan använda följande länkar för att tillfälligt dölja sidor utan det språk du föredrar.