advertisement
Model Nr. LE-207784MT
GEBRUIKSHANDLEIDING
INSTRUCTION MANUAL
Deel 1: BEDIENING VAN DE LED TV
1. Belangrijke veiligheidsvoorschriften
Onjuist gebruik kan brand of elektrische schokken veroorzaken. Om dit te voorkomen, dient u de richtlijnen te volgen voor het installeren, gebruiken en reinigen van dit apparaat. Om de veiligheid en levensduur van de LED-tv te garanderen, dient u de onderstaande punten zorgvuldig door te lezen voordat u het apparaat gaat gebruiken:
Via de Aan/Uit-toets van dit product wordt de tv niet volledig van de stroomtoevoer afgesloten. Haal de stekker van het netsnoer uit het stopcontact voordat u audio- of videokabels op de LED-tv aansluit.
Plaats de LED-tv niet op een wankele ondergrond of meubilair. Het apparaat zou hierdoor kunnen vallen, wat kan leiden tot ernstig persoonlijk letsel en beschadiging van het product. Plaats het apparaat uitsluitend op een stabiele ondergrond die door de fabrikant voor de LED-tv wordt aanbevolen.
Het LED-scherm van dit product is gemaakt van glas. Laat het product niet vallen en stoot niet met andere voorwerpen tegen het product, omdat het scherm hierdoor kan breken. Wees voorzichtig met de scherven als het scherm is gebroken.
De sleuven en openingen aan de achterzijde van het apparaat zijn bedoeld voor ventilatie. Zorg dat deze sleuven en openingen niet worden afgedekt of geblokkeerd.
Onvoldoende ventilatie kan tot oververhitting van het apparaat leiden, wat ten koste van de levensduur van het apparaat kan gaan. Steek geen voorwerpen (metalen of brandbare voorwerpen) in de tv; deze kunnen elektrische schokken of brand veroorzaken.
Plaats de LED-tv niet in de nabijheid van meubels, bekleding of elektronische producten. Het product is niet ontworpen voor inbouw en mag daarom niet in een omsloten ruimte worden geplaatst zonder deugdelijke ventilatie.
Plaats het apparaat niet in de nabijheid van direct zonlicht of warmtebronnen, zoals cv-radiatoren, kachels of andere apparaten (inclusief adapters en versterkers), die warmte genereren.
Het apparaat mag niet worden gebruikt in een natte of vochtige ruimte of in de nabijheid van water, bijvoorbeeld naast een gootsteen, bad, wastafel, wasmachine of zwembad of in een vochtige kelder.
Plaats geen voorwerp dat water of andere vloeistoffen bevat op dit apparaat. Het water kan op het apparaat terechtkomen en elektrische schokken of brand veroorzaken.
Plaats geen kaarsen of open vuur op of in de nabijheid van het apparaat, waardoor brand kan ontstaan.
Bij schoonmaken van de behuizing en het LED-scherm dient u eerst de stekker van het netsnoer uit het stopcontact te halen. Gebruik voor het schoonmaken uitsluitend een zachte, ietwat vochtige doek en wrijf hiermee voorzichtig over het scherm. Een harde doek kan krassen op het scherm veroorzaken. Gebruik nooit een vuile doek, vloeibare schoonmaakmiddelen of geïmpregneerde doekjes om het scherm schoon te maken; dergelijke middelen en materialen kunnen het LED-scherm beschadigen.
U dient de behuizing niet te verwijderen. Dit apparaat bevat namelijk geen onderdelen die onderhoud vereisen. Laat al het onderhoud over aan een bevoegde onderhoudsmonteur.
D 1
2. Belangrijkste functies
1- Geschikt voor analoog RGB signaal;
2- Geschikt voor CVBS signaal (analoog videosignaal);
3- Geschikt voor HDMI signaal;
4- Geschikt voor ontvangst SCART-signaal;
5- Geschikt voor ontvangst tv-signaal;
6- Twee ingebouwde 5W luidsprekers, twee sets audioaansluitingen;
7- Infraroodafstandsbediening voor alle functies.
8- Coax audio uitgang
9- Ondersteuning USB voor PVR (harddisk videorecorder) en Mediaspeler
10- Ondersteuning CI slot (common interface)
11- Ondersteuning van DVD playback
3. Batterijen in de afstandsbediening plaatsen
De afstandbediening wordt gevoed door twee AAA-batterijen.
1. Trek de vergrendeling naar u toe en trek de
klep omhoog.
2. Plaats de batterijen zoals door middel van de
poolmarkeringen is aangegeven.
3. Sluit de batterijenhouder.
Opmerking:
Vervangen van de batterijen is nodig als de afstandsbediening niet meer werkt.
Waarschuwing met betrekking tot batterijen
Onjuist gebruik van batterijen kan leiden tot lekkage van de chemicaliën uit de batterijen, waardoor corrosie van de afstandsbediening kan optreden of de batterijen kunnen openbarsten.
1. Batterijen dienen altijd per twee te worden vervangen. Gebruik altijd nieuwe batterijen
wanneer u de oude batterijen vervangt.
D 2
2. Combineer geen gebruikte batterijen met nieuwe batterijen en gebruik geen combinatie
van verschillende soorten (bijvoorbeeld zink-koolstof- en alkalinebatterijen).
3. Probeer batterijen niet opnieuw op te laden, kort te sluiten, te demonteren, te verhitten of
te verbranden.
4. Als u gebruikte batterijen afdankt, dient u daarbij de plaatselijk geldende voorschriften in
acht te nemen. Gooi batterijen niet weg bij het huishoudafval.
4- Productoverzicht
5- Overzicht bedieningspaneel
INPUT MENU VOLVOL+
MENU SOURCE STANDBY
CH.CH.+ STANDBY STANDBY
1.Functies controlepaneel:
1- SOURCE – Selecteer het binnenkomend signaal:
ATV/DTV/Media/AV/PC/Component/DVD/SCART/HDMI1/HDMI2
2- MENU – Toegang tot het MENU
3- VOL- – Volume omlaag
4- VOL+ – Volume omhoog
5- CH- – TV-kanaal omlaag
6- CH+ – TV-kanaal omhoog
7- STANDBY – Schakelt de TV naar de stand-by en weer in
8- – DVD uitwerpen
9- – DVD afspelen/pauzeren
D 3
Status indicatorlampje
Wanneer het apparaat is ingeschakeld, brandt het indicatorlampje blauw.
Het indicatorlampje brandt rood als de TV op Standby-modus staat.
(3) Afbeelding van aansluitingspunten
DC IN USB HDMI1 HDMI2 SCART PC AUDIO VGA
1 2
Beschrijving connectoren
3 4 5 6
1. Voedingsingang voor de LED-TV (gelijkstroom 12 V), sluit hier de
voedingsadapter op aan.
2. USB-aansluiting. Sluit hier uw externe USB-apparaten op aan.
3. Audio/Video-ingang van hoge kwaliteit voor aansluiting van een extern apparaat
met een HDMI-uitgang.
4. Scart-aansluiting. Sluit uw AV-systeem aan op de Scart-aansluiting.
5. Audio-ingang voor VGA-modus. Sluit hier de audiokabel van uw pc op aan.
6. DB15 VGA-aansluiting.
7. Coaxiale uitgang. Verbinden met de coaxiale ingang van uw versterker.
8. Uitgang voor hoofdtelefoon.
9. YPbPr/Componentingang. Sluit hier uw AV-systeem op aan.
10. CVBS/Composiet video-ingang. Sluit hier uw AV-systeem op aan.
11. Ingang rechter/linker audiokanaal voor Composiet video- en S-Videomodus.
12. Antenne-uitgang (75 Ω). Sluit een antennekabel of antenne aan om een
kabelsignaal/antennesignaal te ontvangen.
13. PCMCIA ingang, voor de kaartlezer CI (Common Interface). Dit vereist een
CAM (Conditional Access Module) om digitale TV af te spelen.
D 4
6- Overzicht afstandsbediening
Afbeelding afstandsbediening Beschrijving toetsen afstandsbediening
SOURCE
1.
STANDBY– De TV naar de stand-by schakelen en
inschakelen
2.
3.
MUTE – Geluid dempen
EJECT– Uitwerpen DVD
4.
NUMBER BUTTONS– Nummer TV-kanaal of teletekst
pagina selecteren
5.
FAV– Open favoriete kanalen menu
6.
10+– Tweecijferig TV-kanaal selecteren
Keer terug naar het vorige TV kanaal
7.
8.
ASPECT– Displaygrootte wijzigen
AUDIO– Selecteer een audio-syteem
9.
VOL(+)/VOL(-)– Volume omhoog / Volume omlaag
10.
CH(+)/CH(-)– TV-kanaal omhoog / TV-kanaal omlaag
11.
THUMBSTICK ( OK)– Navigatietoetsen en
Enter-toets
12.
DISPLAY– Scherm met informatie over het huidige kanaal
13.
MENU – Hoofdmenu op het scherm
14.
DVD SETUP– Setup menu van de DVD op het scherm
15.
SOURCE – Invoermodus selecteren
16.
SLEEP– Tijd instellen waarop de TV automatisch
uitschakelt
17.
PMODE– Beeldmodus selecteren
18.
SMODE– Geluidsmodus selecteren
19.
TEXT– Teletekst in- en uitschakelen
20.
SUBTITLE– Ondertiteling inschakelen
21.
HOLD – Huidige teletekstpagina vastzetten
EPG: druk op deze toets voor de EPG functie
22.
TV/RADIO– TV of Radio instellen
23.
INDEX– Indexpagina opvragen
24.
SUBPAGE– Ga naar subpagina’s
25.
SIZE– Paginagrootte aanpassen
26.
REVEAL– Verborgen worden laten zien (of verbergen)
27.
D.MENU– DVD menu
28.
A-B– Herhaal van punt A to punt B
29.
TITLE – Titel menu
30.
REPEAT– Herhalen
31.
TIMESHIFT– Timeshift menu
–Play/Pause knop in mediamode
–Stop knop in mediamode
–Selecteer vorige hoofdstuk van DVD
–DVD versneld terugspoelen
–DVD versneld vooruitspoelen
–Selecteer volgende hoofdstuk van DVD
Rood - Groen - Geel - Blauw
Gebruik de gekleurde knoppen corresponderend met de kleur weergegeven op het scherm
D 5
7- Verbinding tussen verschillende ingangssignalen
A) Verbinden met een pc-signaal
U kunt uw LED-tv gebruiken als monitor voor uw pc met behulp van
een VGA-kabel (niet bijgeleverd).
1. VGA-ingang (vergeet niet de schroeven aan te draaien)
2. PC Audio-ingang
3. DC 12V voedings-ingang
DC IN USB HDMI1 HDMI2 SCART PC AUDIO VGA
3 2 1
D 6
B) De externe AV-apparaten aansluiten met behulp van de
Composiet- ingangen
1. Linker- en rechteraudio-ingang
2. CVBS-/composiet video-ingang
3. YPbPr/componentingang
4. Voedingsingang (gelijkstroom 12 V)
DC IN USB HDMI1 HDMI2 SCART PC AUDIO VGA
4
(C) Aansluiting voor tv-signaal
1. Ingang kabel/antenne (75 Ω)
2. Voedingsingang (gelijkstroom 12 V)
DC IN USB HDMI1 HDMI2 SCART PC AUDIO VGA
2
D 7
Stappen voor het aansluiten:
* Zorg dat de stroomtoevoer van de LED-tv is uitgeschakeld;
* Sluit de antennekabel (CATV) aan op de corresponderende antenne-ingang (75 Ω ANT)
aan de achterzijde van de LED-tv. Sluit het andere uiteinde van de antennekabel aan op
de antenneaansluiting in de muur of uw digitale kabel-/satellietontvanger;
U kunt nu de reguliere kabeltelevisieprogramma’s bekijken.
* Schakel de stroomtoevoervoor de LED-tv in;
* Druk op de SOURCE -toets om de video input-modus van de LED-tv op ‘ATV’ of “DTV” te
zetten. Het kanaalnummer verschijnt rechtsboven op het scherm;
* Wanneer er geen zenders zijn geprogrammeerd, verschijnt een blauw scherm met een
rondgaand grijs scherm met de tekst ‘NO SIGNAL’ (tv geen signaal);
In het LED-menu kunt u lezen hoe de zenders kunnen worden geprogrammeerd (via
automatisch of handmatig zoeken);
Het is aan te bevelen om de zenders eerst automatisch te laten zoeken;
* Met behulp van de CH+/CH- toetsen of de numerieke toetsen op de afstandsbediening
kunt u het gewenste kanaal selecteren.
(D) Aansluiting voor SCART-signaal
1. Scart input.
2. Voedingsingang (gelijkstroom 12 V).
DC IN USB HDMI1 HDMI2 SCART PC AUDIO VGA
Stappen voor het aansluiten:
2 1
* Lees de bij uw AV-apparatuur geleverde gebruikershandleiding door en vergewis u ervan
dat deze apparatuur een scartaansluiting heeft;
* Zorg dat de stroomtoevoer van de LED-tv is uitgeschakeld;
* Sluit de scartkabel aan op de desbetreffende interfaceconnector aan de achterzijde van
de LED-tv;
* Schakel de stroomtoevoer van de LED-tv in;
* Druk op de SOURCE-toets om de video input-modus van de LED-tv op ‘SCART’ te zetten.
D 8
E) Aansluiting voor extern apparaat (USB)
1. Ingang extern apparaat
2. Voedingsingang (gelijkstroom 12 V)
DC IN USB HDMI1 HDMI2 SCART PC AUDIO VGA
Stappen voor het aansluiten:
2 1
* Lees de bij uw externe apparaat geleverde gebruikershandleiding door en vergewis u
ervan dat deze apparatuur een aansluiting voor externe apparaten heeft;
* Verbind het externe apparaat met de corresponderende interfaceconnector aan de
achterkant van de LED-tv;
* Druk op de SOURCE-toets om de video-ingangsmodus van de LED-TV in te stellen op
“Media” modus.
F) Aansluiting met HDMI-signaal
1. HDMI x2 ingang
2. Gelijkstroom 12V ingang
DC IN USB HDMI1 HDMI2 SCART PC AUDIO VGA
Stappen voor het aansluiten:
2 1
* Lees de bij uw externe apparaat geleverde gebruikershandleiding door en vergewis u
ervan dat deze apparatuur een HDMI-aansluiting heeft;
* Vergewis U ervan dat de stroomtoevoer van de LED-TV is uitgeschakeld;
* Verbind een HDMI-kabel met de corresponderende interfaceconnector aan de
achterkant van de LED-TV;
* Schakel de stroomtoevoer van de LED-TV in;
* Druk op de SOURCE-toets om de video-ingangsmodus van de LED-TV op “HDMI1” of
“HDMI 2” te zetten.
D 9
8- Belangrijkste bedieningsinstructies
De LED-tv inschakelen
Wanneer de STANDBY-toets wordt ingedrukt en de LED-tv wordt ingeschakeld, verandert het indicatorlampje aan de voorzijde van de
LED-tv van rood naar groen. Wanneer de LED-tv wordt ingeschakeld, verschijnt de inputmodus op het scherm.
Wanneer de LED-tv met behulp van de STANDBY-toets wordt uitgeschakeld, gaat de LED-tv in de stand-by modus en gaat het indicatorlampje rood branden.
Energie Besparing
In verband met energie besparing is er standaard een stand-by timer van 4 uur ingesteld. Wij raden u aan deze timer niet uit te zetten, mocht u deze toch uit willen zetten dan kan dit via het tijd menu.
Schakelen tussen verschillende bronnen:
ATV/DTV/Media/AV/PC/Component/DVD/SCART/HDMI1/HDMI2
Als u op de SOURCE-toets drukt, wordt het menu voor de inputmodus weergegeven. In het menu kunt u vervolgens op ▼/▲ drukken om een inputbron te kiezen. Druk op de Enter-toets om uw selectie te bevestigen.
Audiobediening
1. Druk op de toets VOL+ om het volume toe te laten nemen.
Er verschijnt een getal op het scherm dat het geluidsniveau aangeeft.
2. Druk op de toets VOL– om het volume af te laten nemen.
Er verschijnt een getal op het scherm dat het geluidsniveau aangeeft.
D 10
Dempen (MUTE)
1. Druk op de MUTE-toets om het geluid tijdelijk uit te schakelen.
Het Mute-pictogram verschijnt op het scherm.
2. Druk nogmaals op de MUTE-toets om het geluid weer in te
schakelen.
Het Mute-pictogram verdwijnt.
MUTE
Opmerking
Wanneer de LED-tv wordt uitgeschakeld, wordt de dempfunctie automatisch uitgeschakeld.
Het gewenste tv-kanaal selecteren
U kunt de numerieke toetsen op de afstandsbediening gebruiken om rechtstreeks tv-kanalen te selecteren. De LED-tv biedt de mogelijkheid om maximaal 99 kanalen (1 tot en met 99) op te slaan en u kunt via de toetsen op de afstandsbediening of het bedieningspaneel een selectie maken.
1. Druk op de desbetreffende toets op de afstandsbediening wanneer u een van de kanalen van 1 tot en met 9 wilt kiezen (als u bijvoorbeeld kanaal 8 wenst, drukt u op toets 8).
Kies het DTV-kanaal dat u wenst
Er zijn meerdere manieren om het kanaal van uw keuze te selecteren:
1. Door de kanaallijst heen lopen:
Druk op de CH+ toets om naar boven en op de CH- toets om naar beneden door de beschikbare kanalen heen te gaan.
2. Kiezen met het nummer:
Voer het volledige kanaalnummer direct in met de numerieke toetsen om het gewenste kanaal te kiezen.
3. Kiezen via een minikanalenlijst:
Het is ook mogelijk om het kanaal te veranderen door een minikanalenlijst te gebruiken die te bereiken is via de OK-toets, terwijl er geen andere op het scherm wordt getoond.
Gebruik de OMHOOG/OMLAAG PIJL toetsen om te navigeren en druk op OK om het gekozen kanaal te tonen. Om deze minikanalenlijst te verlaten drukt u op de EXIT-toets.
D 11
4. Keuze via EPG (Elektronische Programmagids)
Door deze functie komt een kanalenoverzicht voor een periode van een week in beeld.
1. Druk op de EPG-toets om de elektronische programmagids op het scherm te krijgen.
PROGRAMME GUIDE
10 Apr 2007 14:00- 15:00 10 Apr 2007 14:23
Barnaby (John Nettles) questions the guilt of a woman who is on trial for the murder of her best friend.
10 Apr
14.E4
28.ITV4
32.Fitm4+1
75.CITV
14:00-15:00 Midsomer nurders
15:00-16:00
16:00-17:00
17:00-18:00
The Force
Double Indemnity
Surprisel: Brilliant Creatu.
Record
Move View
Display
Next Day
Schedule
Prev Day
Remind
OK
2. Gebruik de OMHOOG/OMLAAG PIJL toetsen om het kanaal te kiezen en druk op
OK om het kanaal te bekijken.
ASPECT (Beeldverhouding)
Druk in om de beeldverhouding weer te geven (Auto; 4:3; 16:9; ZOOM1; ZOOM 2)
AUDIO
Meestal ingesteld op stereo om de beste weergave te verkrijgen, maar als de ontvangst slechter wordt of als de dienst niet beschikbaar is, kan deze op MONO worden gezet.
NICAM DUAL STEREO en NICAM DUAL en NICAM DUAL kunnen ook worden gekozen als een monosignaal wordt uitgezonden.
Druk op de SUBTITLE-toets om de ondertitelingstaal te tonen en gebruik de
OMHOOG/OMLAAG pijlen om de ondertitelingstaal te kiezen of uit te schakelen. Druk daarna op OK om de keuze te bevestigen.
9- PVR bedieningsinstructies
1- PVR Function list
Meteen opnemen
Opnemen met timer
Onderwerp
1. Druk op toets om het huidige programma op te nemen
Druk op om de opname te stoppen.
2. Maximum bestandsgrootte 3,9GB, als de max. capaciteit wordt overschreden,
wordt het bestand in delen opgeslagen.
1. Gebruik de EPG om de tijd van opname in te stellen.
2. Timer ondersteunt instellen van periodieke opnames/dagelijkse opnames/eenmalige
opname
3. Als de ingestelde tijd van opname strijdig is met een eerdere instelling, verschijnt
een waarschuwing.
1. Kan een enkel bestand wissen
Diskmanager
2. Geeft disk-formatteerfuncties
Playback 1. U kunt het opgenomen programma terugspelen in Media/USB/kanaal
D 12
2- PVR Basisinstructies
1. De opslaglocatie van een bestand.
Druk op de ▲/▼toets om Optie te kiezen in het hoofdmenu
Druk op de ▲/▼toets om PVR File System te kiezen, druk daarna op OK.
Druk op de ▲/▼toets om Select Disk te kiezen, druk daarna op OK.
Gebruik het externe apparaat (USB) om de tevoren ingestelde opname uit te voeren.
In deze interface kunt u van indeling wisselen.
Select Disk C:
Check PVR File System Start
USB Disk
Format
Time Shift Size
Speed
Free Record Limit 6 Hr.
O K M e n u
O K
Select Disk
USB 0
Disk C
M e n u
2. Controleer de USB snelheid
Druk op de ▲/▼toets om Check PVR File System te kiezen,druk daarna op OK. Dan wordt de USB snelheid gecontroleerd.
Select Disk C:
Check PVR File System Checking
USB Disk Pass
Format Pass
Time Shift Size All
Speed Checking
Free Record Limit 1 Hr.
O K M e n u
3- Opnamemethodes
Manier 1: Sneltoets
1. Druk op toets om het huidige programma op te nemen
Druk op om de opname te stoppen.
It will stop PVR.
play
1 YLE TV1
FB FF Prev.
Next pause Stop
[00:00:42]
(0000:39:48)
08:38
Yes No
2. Druk op de STOP-toets om de opname te stoppen, daarna wordt de normale
televisieuitzending hervat.
D 13
3. Als de opslagruimte van de schijf te klein is, verschijnt een waarschuwingssignaal.
Dan stopt de opname automatisch en de normale televisieuitzending wordt hervat.
4. Druk op de indextoets om de informatie over de lijst van opgenomen programma’s te zien.
Druk op de DISPLAY-toets om de details van het programma te zien.
Recorded list Programme
Delete
OK
INFO index
LET OP: u kunt de details zien over DATUM / TIJD / DUUR / PROGRAMMA NAAM /
KANAALNAAM / BESCHRIJVING
Manier 2: Timeshift
1. Druk op T.SHIFT de toets om Timeshift te starte play
1 YLE TV1
FB FF Prev.
Next pause Stop
[00:00:42]
(0000:39:48)
08:38
Deze handeling kan het beeld stilzetten en het programma op de achtergrond opnemen
Manier 3: Timer
1. U kunt ook de EPG-toets indrukken om de opname in te stellen.
Druk op de rode toets om de opname te starten,
PROGRAMME GUIDE
10 Apr 2007 14:00- 15:00 10 Apr 2007 14:23
Barnaby (John Nettles) questions the guilt of a woman who is on trial for the murder of her best friend.
10 Apr
14.E4
28.ITV4
32.Fitm4+1
75.CITV
14:00-15:00 Midsomer nurders
15:00-16:00
16:00-17:00
The Force
Double Indemnity
17:00-18:00 Surprisel: Brilliant Creatu.
Record
Move View
Display
Next Day
Schedule
Prev Day
Remind
OK
2. U kunt de tijd van de gewenste opname van te voren instellen.
D 14
-
RECORDER
1 YLE TV1
Start Time
15 Minute
08Hour
Dec Month
07 Date
End Time
03 Minute
09 Hour
Dec Month
07 Date
Mode once +
B a c k O K
3. Als de ingestelde tijd strijdig is met een eerdere instelling, verschijnt een waarschuwing.
Timer Overlay
21 TMF
13 Jul 2007 03:00
4 . De tijd van de opname verschijnt. Daarna komt automatisch het huidige kanaal weer in beeld.
3 Sec.to Switch channel
Yes No
D 15
10- Bedieningsinstructies Media
LET OP: Sluit het USB-apparaat aan voor u het Mediamenu kiest, druk daarna de
SOURCE-toets in om de Input-bron op Media te zetten.
Druk op de◄ / ► toets om Media te kiezen in het bronmenu, druk daarna op OK.
Druk op de ◄ / ► toets om de optie die u wilt aanpassen in het hoofdmenu Media te kiezen, druk daarna op OK .
Fotomenu
Druk op de ◄ / ► toets om FOTO te kiezen in het hoofdmenu, druk daarna op OK.
Druk op de menutoets om terug te gaan naar het vorige menu en verlaat het menu om te stoppen.
Druk op de ◄ / ► toets om de drive disk te kiezen die wilt bekijken, druk daarna op OK.
Druk op de ◄ / ► toets om de return-optie te kiezen om terug te gaan naar het vorige menu.
Return C D E
D 16
Win Recorder Flower.jpg
Flower00.jpg
HOME.jpg
Flower01.jpg
River.jpg
Delete
Druk op de ◄ / ► toets om het bestand te kiezen in het bestandskeuzemenu, druk daarna op de OK om de afbeelding weer te geven.
Bij het aanklikken van de door u gekozen optie verschijnt de bestandsinformatie rechts in beeld, terwijl middenin een preview van de afbeelding wordt getoond.
Flower00.jpg
Y R Size:
Date:
Time:
F
Resolution: 1200X900
1381KBytes
2010/05/09
16:13:25
Delete
Druk op de
◄ / ►
toets om in het bestandskeuzemenu de bestandsmap te kiezen waarin u wilt zoeken, druk daarna op de rode toets of op OK op uw afstandsbediening om naar het submenu te gaan.
Druk op de
◄ / ►
toets om in het bestandskeuzemenu het bestand te kiezen dat u wilt wissen, druk daarna op de rode toets of op op uw afstandsbediening om bestanden te wissen.
◄
Muziekmenu
Druk op de
◄ / ►
toets om MUZIEK te kiezen in het hoofdmenu, druk daarna op
OK.
Druk op de menutoets om terug te keren naar het vorige menu en verlaat het menu om te stoppen.
Druk op de ◄ / ► toets om de drivedisk te kiezen waarnaar u wilt kijken, druk daarna op OK.
D 17
Druk op de ◄ / ► toets om de return-optie te kiezen om terug te keren naar het vorige menu.
Bij het aanklikken van de door u gekozen optie verschijnt de bestandsinformatie rechts in beeld, terwijl er muziek middenin het beeld verschijnt.
C:\ 1 1 try.mp3
happy.mp3
Delete
Win
Maybet.mp3
Record thank.mp3
angel.mp3
Album:
Title:
(2005/01...
1khz-10db
Bit Rate: 320K
Artist: BCD103
Sampling: 44K
Year: 2005
Size: 2426KBytes
Druk op de ◄ / ► toets om in het bestandskeuzemenu het bestand te kiezen dat u wilt zien, druk daarna op OK om het bestand aan de afspeellijst toe te voegen.
D 18
Druk op de ◄ / ► toets om het menu onderaan te kiezen, druk daarna op OK.
Druk op de menutoets om terug te keren naar het vorige menu en op EXIT om het gehele menu te verlaten. Druk op de ▼toets om het menu onderaan te verbergen.
Filmmenu
Druk op de◄ / ► toets om MOVIE in het hoofdmenu te kiezen, druk daarna op OK.
Druk op de menutoets om terug te keren naar het vorige menu en verlaat het menu om te stoppen.
Druk op de ◄ / ►toets om de drivedisk te kiezen die u wilt zien, druk daarna op OK.
Druk op de ◄ / ►toets om de return-optie te kiezen en terug te keren naar het vorige menu.
Bij het aanklikken van de door u gekozen optie verschijnt de bestandsinformatie rechts in beeld, terwijl de filmpreview middenin het beeld verschijnt.
Druk op de mediatoets om de gekozen film af te spelen.
Druk op de display-toets om het menu onderaan te kiezen dat u wilt zien, druk daarna op
OK om het te bedienen.
Druk op de menutoets om terug te keren naar het vorige menu en druk op de exit-toets om het gehele menu te verlaten.
D 19
11-Teletekst
Het uiterlijk van de teletekstpagina’s kan, afhankelijk van de omroepmaatschappijen variëren. Teletekst is alleen beschikbaar als het gekozen kanaal teletekst uitzendt.
Het indrukken van de TEXT-toets in de Teletekst-modus schakelt het apparaat naar TV.
In de Teletekst-modus kan nog wel het volume worden aangepast naar het gewenste luisterniveau.
Paginakeuze
De pagina’s kunnen worden gekozen door invoeren van het paginanummer, met behulp van de cijfertoetsen op de afstandsbediening.
Formaat-toets (SIZE)
Druk op de SIZE-toets om het formaat van het beeld te veranderen: van normaal groot boven groot onder normaal.
Reveal-toets
Druk op de Reveal-toets om verborgen woorden te tonen, bijv. antwoorden op quizvragen. Druk opnieuw om ze te verbergen.
Red/Green/Yellow/Cyan-toetsen (Rood/Groen/Geel/Blauw-toetsen)
Deze vier toetsen corresponderen met de onderwerpen met die kleuren.
Hold-toets
Druk op de Hold-toets om de Teletekstpagina in beeld te houden bij het bekijken van informatie met meerdere pagina’s. Druk de toets opnieuw in om terug te keren naar automatisch verversen van de pagina.
Index-toets
Druk op de Index-toets om naar de hoofdindexpagina te gaan.
Afhankelijk van de manier waarop informatie wordt uitgezonden, moet u wellicht meerdere malen op deze toets drukken om naar de hoofdindexpagina terug te gaan.
Subpage-toets (Subpagina)
Wanneer de teletekstinformatie op meerdere pagina’s wordt weergegeven, kan het enige tijd duren voordat de door u gewenste subpagina automatisch wordt weergegeven.
U kunt het nummer van de gewenste subpagina invoeren en naar het tv-programma blijven kijken tot de desbetreffende subpagina wordt gevonden.
Selecteer het paginanummer met behulp van de cijfertoetsen 0-9.
Indien bovenin het scherm wordt aangegeven dat er subpagina’s worden uitgezonden terwijl de pagina niet wordt gewijzigd, duidt dit erop dat de omroepmaatschappij de inhoud van de pagina's heeft bijgewerkt en dat er geen subpagina's zijn.
Als u op de Subpage-toets drukt, wordt rechtsonder op het scherm weergegeven.
Voer het gewenste subpaginanummer in voordat het paginanummer van het scherm verdwijnt.
Om pagina 6 te selecteren, voert u '0’, ‘0’, ‘0’ en ‘6’ in.
Text-toets (Teletekst)
Druk op de TEXT-toets om de teletekstmodus in- of uit te schakelen.
Digitale Teletekst
Sommige digitale kanalen hebben een digitale versie van de traditionele teletekstservice. Als het kanaal waar u naar kijkt deze digitale teletekst heeft, verschijnt er meestal informatie in het scherm hoe u deze service kunt inschakelen. Voor de meeste kanalen die hierover beschikken gebruikt u hiervoor de RODE of TEXT-toets.
Daarna kunt u de informatie op het scherm volgen om door de beschikbare informatie te navigeren. De standaardnavigatiemethode is het gebruiken van de pijltjestoetsen en de
ENTER-toets. Sommige diensten bieden sneltoetsen via de kleurentoetsen op de afstandsbediening.
D 20
12- Bediening van het menu
U kunt bepaalde parameters van de LED-tv in het menu aanpassen. Lees de onderstaande beschrijvingen zorgvuldig door om meer inzicht te krijgen in de parameters die kunnen worden aangepast.
Invoer-modus: PC
1.Druk op de Menu-toets om het hoofdmenu te openen.
2.Gebruik de pijltjestoets RECHTS om het SCHERMMENU, het beeld (PICTURE), het geluid (SOUND), de tijd (TIME),
het slot ( LOCK) of de instelling (SETUP) te selecteren.
3.Druk op de Exit-toets om het menu te sluiten.
TITEL MENU
SCHERM
SUBMENU SCHERM
SCREEN
Auto Adjust
H-Offset 50
V-Offset 50
Size 50
Phase 50
Position Reset ard
0 ff ff ff
Exit
INSTRUCTIES
1. Auto Adjust
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor de
Auto Adjust geel gemarkeerd wordt. Met de pijltjestoets Rechts kunt u de instelling automatisch aanpassen.
2. H Offset
Gebruik de Omhoog/Omlaag pijltjestoetsen om de aanduiding voor H Positie geel te markeren. Met deze functie kan de beeldbreedte worden aangepast d.m.v. de pijltjestoetsen Links/Rechts.
3. V Offset
Gebruik de Omhoog/Omlaag pijltjestoetsen om de aanduiding voor V Positie geel te markeren. Met deze functie kan de beeldhoogte worden aangepast d.m.v. de pijltjestoetsen Links/Rechts.
4. Formaat
Gebruik de Omhoog/Omlaag toets om
Formaat (Size) te kiezen, druk daarna op OK om het submenu te openen. Druk op de
Links/Rechts pijltjestoetsen om het beeldformaat aan te passen.
5. Aspect (Phase)
Gebruik de Omhoog/Omlaag pijltjestoetsen om de PHASE indicator geel te markeren.
Met deze functie kan mogelijke horizontale interferentie worden gecorrigeerd en kunnen de omtrekken van personen worden verscherpt door middel van de Links/Rechts pijltjestoetsen.
6. Resetten van Positie
Gebruik de Omhoog/Omlaag pijltjestoetsen om de RESET indicator geel te markeren.
Gebruik de Rechts-pijltjestoets om terug te keren naar de standaardinstellingen.
D 21
TITEL MENU
BEELD
SUBMENU BEELD
Move Return
Picture mode Standard
Contrast 50
Brightnes
Colour 50
0
Tint 50
Sharpness 30
Colour Temp Normal
Noise Reduction Middle
Select Exit
INSTRUCTIES
1. Beeldmodus
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor de Beeldmodus (Picture Mode) geel gemarkeerd wordt. Met de pijltjestoetsen
Links/Rechts kunt u een beeldmodus selecteren (DYNAMIC, STANDARD, MILD,
PERSONAL).
2. Contrast
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
CONTRAST geel gemarkeerd wordt. Met de pijltjestoetsen Links/Rechts kunt u het contrast aanpassen. Dit kan alleen worden aangepast in de PERSONAL-modus.
3. Helderheid
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Helderheid (Brightness) geel gemarkeerd wordt. Met de pijltjestoetsen Links/Rechts kunt u de helderheid aanpassen. Dit kan alleen worden aangepast in de
PERSONAL-modus.
4. Kleur
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
KLEURINSTELLING (COLOUR SETTING) geel gemarkeerd wordt. Met de pijltjestoetsen Links/Rechts kunt u de kleur aanpassen. De kleur neemt toe wanneer het cijfer hoger wordt.
5. Kleurschakering
Gebruik de Omhoog/omlaag pijltjestoetsen om de TINT indicator geel te markeren. Met de pijltjestoetsen Links/Rechts past u de kleurschakering aan als uw systeem de
NTSC-norm heeft.
6. Scherpte
Gebruik de Omhoog/omlaag pijltjestoetsen om de SCHERPTE (SHARPNESS) indicator geel te markeren. Met de pijltjestoetsen
Links/Rechts past u de scherpte aan.
D 22
BEELD
NAAM VAN MENU
Move Return
Picture mode Standard
Contrast 50
Brightnes
Colour 50
0
Tint 50
Sharpness 30
Colour Temp Normal
Noise Reduction Middle
Select Exit
SUBMENU GELUID
7. Kleurtemperatuur
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Kleurtemperatuur (Color Temperature) geel gemarkeerd wordt. Met de pijltjestoetsen
Links/Rechts kunt u de voor uw ogen optimale kleurtemperatuur selecteren. U kunt kiezen tussen Normaal (Normal), Warm, en
Koud (Cold).
8. Ruisonderdrukking
U kunt met behulp van de pijltjestoetsen
Links/Rechts om het niveau van het geluid van de video te onderdrukken (Noise
Reduction) als de signaalontvangst zwak is.
INSTRUCTIES
GELUID
Move Return
Sound Mode Standard
Treble 50
Bass 50
Balance 0
Auto Volume Off
SPDIF Mode Off
AD Switch Off
Select Exit
1. Geluidsmodus
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor de
Geluidsmodus (Sound Mode) geel gemarkeerd wordt. Met de pijltjestoetsen
Links/Rechts kunt u een geluidsmodus selecteren. U kunt kiezen uit Standaard
(STANDARD), Film (MOVIE), Muziek
(MUSIC), Sport (SPORTS), Persoonlijk
(PERSONAL).
2. Hoge tonen
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Hoge tonen (TREBLE) geel gemarkeerd wordt. Met de pijltjestoetsen Links/Rechts kunt u de hoge tonen aanpassen. Deze kunnen alleen worden aangepast in de
Persoonlijke modus (PERSONAL).
3. Lage tonen
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Lage tonen (Bass) geel gemarkeerd wordt.
Met de pijltjestoetsen Links/Rechts kunt u de lage tonen aanpassen. Deze kunnen alleen worden aangepast in de Persoonlijke modus (Personal).
4. Balans
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
BALANS (BALANCE) geel gemarkeerd wordt. Met de pijltjestoetsen Links/Rechts kunt u de balans aanpassen.
5. Automatische volumeregeling
Druk op de Omhoog/Omlaag pijltjestoetsen om de indicator voor Automatische volumeregeling (Auto Volume Control,
AVL) geel te markeren. Druk daarna op
OK om Aan (On) of Uit (Off) te selecteren.
6. SPDIF modus
Druk op de Omhoog/omlaag toets om de
SPDIF modus te selecteren, druk daarna op
OK om Auto/PCM/Off te kiezen.
7. AD Keuze
Druk op de Omhoog/omlaag toets om AD keuze te selecteren, daarna drukt u op
OK om Aan (On) of Uit (Off) te kiezen.
D 23
NAAM VAN MENU
TIJD
NAAM VAN MENU
SLOT
Move
SUBMENU TIME
Sleep Timer
Auto Standby
OSD Timer
Off
Off
5 S
SUBMENU SLOT
Move
Return
Return
Block
Select
Lock System
Set Password
Off
Block Program
Parental Guidance Off
Key Lock Off
Select
Exit
Exit
INSTRUCTIES
1. Slaaptimer
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Slaaptimer (Sleep Timer) geel gemarkeerd wordt. Met de pijltjestoetsen Links/Rechts kunt u de slaaptimer selecteren.
2. Auto Standby
Druk op de Omhoog/omlaag toets om Auto
Standby te selecteren, druk daarna op
OK om in het submenu te komen. Druk op de Omhoog/Omlaag/Links/Rechts toetsen om te selecteren.
3. OSD Timer (Toon op scherm)
Gebruik de Omhoog/omlaag pijltjestoetsen om de OSD-timer indicator geel te markeren. Gebruik de Links/rechts pijltjestoetsen om het OSD Timer scherm te selecteren.
INSTRUCTIES
1. Systeemblokkering
Druk op de pijltjestoetsen Omhoog/Omlaag om Lock System te selecteren, druk daarna op OK om de volgende drie opties te laten gelden. (Het standaard wachtwoord is
‘0000’).
2. Instellen wachtwoord
Druk op de Omhoog/omlaag toets om
Instellen wachtwoord (Set password) te selecteren, druk daarna op OK om het submenu te openen om een nieuw wachtwoord in te stellen.
3. Programma blokkeren (niet beschikbaar in PC)
Druk op de Omhoog/omlaag toets om Block
Program te selecteren, druk daarna op
OK om het submenu te openen.
Druk op de Omhoog/omlaag toets om het programma te kiezen dat u wilt blokkeren, druk daarna op de gele toets op de afstandsbediening. (Om de blokkering van het programma op te heffen, voert u het door u ingestelde wachtwoord in.)
Druk op OK om de instelling te bewaren en druk op de menutoets om terug te keren naar het vorige menu.
4. Kinderslot (Parental Guidance) (niet beschikbaar in PC)
Druk op de Omhoog/omlaag toets om
Kinderslot (Parental Guidance) te selecteren, druk daarna op OK om het
(Beschikbare opties zijn: Uit (Off), 4-18)
5. Toetsenblokkering
Druk op de pijltjestoetsen Omhoog/Omlaag om de aanduiding voor Toetsenblokkering
(Key Lock) geel te markeren. Met de pijltjestoetsen Links/Rechts kunt u de optie
Aan (On) of Uit (Off) selecteren. Als
Toetsenblokkering is ingeschakeld (On), functioneren de toetsen niet.
D 24
NAAM VAN MENU
INSTELLINGEN
SETUP
Move
SUBMENU
INSTELLINGEN
Deutsch
Return
OSD Language English
TT Language West
Hearing Impaired Off
PVR File System
Aspect Ratio
Blue Screen
First Time Installation
Reset
Software Update(USB)
16:9
Off
Portugues
OK
Select
Please select an OSD Language
English Espanol Francais
Nederlands
Exit
INSTRUCTIES
1. OSD Taal
Zorg met de pijltjestoetsen Omhoog/Omlaag dat de aanduiding voor Taal (OSD Language) geel gemarkeerd wordt. Met de pijltjestoetsen
Links/Rechts kunt u het menu in de volgende talen instellen: NEDERLANDS,
DUITS, SPAANS, PORTUGEES, FRANS,
ENGELS.
2. TT Taal (niet beschikbaar in PC)
Druk op de Omhoog/omlaag toets om TT te kiezen, druk daarna op OK om het submenu te openen. Druk op
Omhoog/Omlaag/Links/Rechts om te selecteren.
3. Slechthorenden (niet beschikbaar in PC)
Druk op de Omhoog/omlaag toets om
Slechthorenden (Hearing impaired) te selecteren, druk daarna op OKom Aan
(On) of Uit (Off) te selecteren.
4. PVR Bestandssy steem (niet beschikbaar in PC)
Druk op de Omhoog/omlaag toets om PVR
File System te kiezen, druk daarna op
OK om Aan (On) of Uit (Off) te selecteren.
5. Beeldverhouding (Aspect Ratio)
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Aspect Ratio geel gemarkeerd wordt, Druk daarna op OK om het submenu te openen. Druk op de Omhoog/Omlaag
toets om Aspect Ratio te kiezen.(Beschikbare opties: Auto; 4:3; 16:9; ZOOM1; ZOOM 2.)
6. Blauw scherm
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Blauw scherm (Blue Screen) geel gemarkeerd wordt. Druk daarna op OK om Aan (On) of Uit (Off) te kiezen.
7. Eerste installatie (niet beschikbaar in PC)
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Eerste installatie (First Time Installation) geel gemarkeerd wordt. Druk daarna op
OK om de relevante opties in te stellen, waaronder OSD-taal, land en afstemming.
8. Reset
Druk op de pijltjestoetsen Omhoog/Omlaag om Reset te selecteren, druk daarna op
OK om een dialoogmenu te openen. Met de pijltjestoets Links kunt u door YES (Ja) te selecteren de fabrieksinstellingen herstellen voor naar keuze OSD-taal, land en het bedienen van kanaalafstemming.
9. Software Update (USB)
Druk op Omhoog/omlaag om Software
Update (USB) te kiezen, druk daarna op
OK om de update van de software uit te voeren met behulp van USB.
D 25
Invoer-modus: AV/SCART/HDMI/DVD/Component/MEDIA
1.Druk op de MENU toets om het hoofdmenu weer te geven.
2.Gebruik de RECHTS pijltjestoets om het menu voor beeld (Picture), het geluid (Sound), de tijd (Time), het slot ( Lock) of de instellingen (SETUP) te kiezen.
3.Druk op EXIT om het menu te verlaten.
TITEL MENU
BEELD
SUBMENU BEELD
Move Return
Picture mode Standard
Contrast 50
Brightnes
Colour 50
0
Tint 50
Sharpness 30
Colour Temp Normal
Noise Reduction Middle
Select Exit
INSTRUCTIES
1. Beeldmodus
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor de Beeldmodus (Picture Mode) geel gemarkeerd wordt. Met de pijltjestoetsen
Links/Rechts kunt u een beeldmodus selecteren (DYNAMIC, STANDARD, MILD,
PERSONAL).
2. Contrast
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
CONTRAST geel gemarkeerd wordt. Met de pijltjestoetsen Links/Rechts kunt u het contrast aanpassen. Dit kan alleen worden aangepast in de PERSONAL-modus.
3. Helderheid
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Helderheid (Brightness) geel gemarkeerd wordt. Met de pijltjestoetsen Links/Rechts kunt u de helderheid aanpassen. Dit kan alleen worden aangepast in de
PERSONAL-modus.
4. Kleur
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
KLEURINSTELLING (COLOUR SETTING) geel gemarkeerd wordt. Met de pijltjestoetsen Links/Rechts kunt u de kleur aanpassen. De kleur neemt toe wanneer het cijfer hoger wordt.
5. Kleurschakering
Gebruik de Omhoog/omlaag pijltjestoetsen om de TINT indicator geel te markeren. Met de pijltjestoetsen Links/Rechts past u de kleurschakering aan als uw systeem de
NTSC-norm heeft.
6. Scherpte
Gebruik de Omhoog/omlaag pijltjestoetsen om de SCHERPTE (SHARPNESS) indicator geel te markeren. Met de pijltjestoetsen
Links/Rechts past u de scherpte aan.
D 26
BEELD
NAAM VAN MENU
Move Return
Picture mode Standard
Contrast 50
Brightnes
Colour 50
0
Tint 50
Sharpness 30
Colour Temp Normal
Noise Reduction Middle
Select Exit
SUBMENU GELUID
7. Kleurtemperatuur
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Kleurtemperatuur (Color Temperature) geel gemarkeerd wordt. Met de pijltjestoetsen
Links/Rechts kunt u de voor uw ogen optimale kleurtemperatuur selecteren. U kunt kiezen tussen Normaal (Normal), Warm, en
Koud (Cold).
8. Ruisonderdrukking
U kunt met behulp van de pijltjestoetsen
Links/Rechts om het niveau van het geluid van de video te onderdrukken (Noise
Reduction) als de signaalontvangst zwak is.
INSTRUCTIES
GELUID
Move Return
Sound Mode Standard
Treble 50
Bass 50
Balance 0
Auto Volume Off
SPDIF Mode Off
AD Switch Off
Select Exit
1. Geluidsmodus
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor de
Geluidsmodus (Sound Mode) geel gemarkeerd wordt. Met de pijltjestoetsen
Links/Rechts kunt u een geluidsmodus selecteren. U kunt kiezen uit Standaard
(STANDARD), Film (MOVIE), Muziek
(MUSIC), Sport (SPORTS), Persoonlijk
(PERSONAL).
2. Hoge tonen
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Hoge tonen (TREBLE) geel gemarkeerd wordt. Met de pijltjestoetsen Links/Rechts kunt u de hoge tonen aanpassen. Deze kunnen alleen worden aangepast in de
Persoonlijke modus (PERSONAL).
3. Lage tonen
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Lage tonen (Bass) geel gemarkeerd wordt.
Met de pijltjestoetsen Links/Rechts kunt u de lage tonen aanpassen. Deze kunnen alleen worden aangepast in de Persoonlijke modus (Personal).
4. Balans
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
BALANS (BALANCE) geel gemarkeerd wordt. Met de pijltjestoetsen Links/Rechts kunt u de balans aanpassen.
5. Automatische volumeregeling
Druk op de Omhoog/Omlaag pijltjestoetsen om de indicator voor Automatische volumeregeling (Auto Volume Control,
AVL) geel te markeren. Druk daarna op
OK om Aan (On) of Uit (Off) te selecteren.
6. SPDIF modus
Druk op de Omhoog/omlaag toets om de
SPDIF modus te selecteren, druk daarna op
OK om Auto/PCM/Off te kiezen.
7. AD Keuze
Druk op de Omhoog/omlaag toets om AD keuze te selecteren, daarna drukt u op
OK om Aan (On) of Uit (Off) te kiezen.
D 27
NAAM VAN MENU
TIJD
NAAM VAN MENU
SLOT
TIME
Move
SUBMENU TIME
Sleep Timer
Auto Standby
OSD Timer
Off
Off
5 S
SUBMENU SLOT
Move
Return
Return
Block
Select
Lock System Off
Set Password
Block Program
Parental Guidance Off
Key Lock Off
Select
Exit
Exit
INSTRUCTIES
1. Slaaptimer
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Slaaptimer (Sleep Timer) geel gemarkeerd wordt. Met de pijltjestoetsen Links/Rechts kunt u de slaaptimer selecteren.
2. Auto Standby
Druk op de Omhoog/omlaag toets om Auto
Standby te selecteren, druk daarna op
OK om in het submenu te komen. Druk op de Omhoog/Omlaag/Links/Rechts toetsen om te selecteren.
3. OSD Timer (Toon op scherm)
Gebruik de Omhoog/omlaag pijltjestoetsen om de OSD-timer indicator geel te markeren. Gebruik de Links/rechts pijltjestoetsen om het OSD Timer scherm te selecteren.
INSTRUCTIES
1. Systeemblokkering
Druk op de pijltjestoetsen Omhoog/Omlaag om Lock System te selecteren, druk daarna op OK om de volgende drie opties te laten gelden. (Het standaard wachtwoord is
‘0000’).
2. Instellen wachtwoord
Druk op de Omhoog/omlaag toets om
Instellen wachtwoord (Set password) te submenu te openen om een nieuw wachtwoord in te stellen.
3. Programma blokkeren (niet beschikbaar in de AV)
Druk op de Omhoog/omlaag toets om Block
Program te selecteren, druk daarna op
OK om het submenu te openen.
Druk op de Omhoog/omlaag toets om het programma te kiezen dat u wilt blokkeren, druk daarna op de gele toets op de afstandsbediening. (Om de blokkering van het programma op te heffen, voert u het door u ingestelde wachtwoord in.)
Druk op OK om de instelling te bewaren en druk op de menutoets om terug te keren naar het vorige menu.
4. Kinderslot (Parental Guidance) (niet beschikbaar in de AV)
Druk op de Omhoog/omlaag toets om
Kinderslot (Parental Guidance) te selecteren, druk daarna op OK om het submenu te openen.
(Beschikbare opties zijn: Uit (Off), 4-18)
5. Toetsenblokkering
Druk op de pijltjestoetsen Omhoog/Omlaag om de aanduiding voor Toetsenblokkering
(Key Lock) geel te markeren. Met de pijltjestoetsen Links/Rechts kunt u de optie
Aan (On) of Uit (Off) selecteren. Als
Toetsenblokkering is ingeschakeld (On), functioneren de toetsen niet.
D 28
NAAM VAN MENU
INSTELLINGEN
SETUP
Move
SUBMENU
INSTELLINGEN
Deutsch
Return
OSD Language English
TT Language West
Hearing Impaired Off
PVR File System
Aspect Ratio 16:9
Off Blue Screen
First Time Installation
Reset
Software Update(USB)
Portugues
OK
Select
Please select an OSD Language
English Espanol Francais
Nederlands
Exit
INSTRUCTIES
1. OSD Taal
Zorg met de pijltjestoetsen Omhoog/Omlaag dat de aanduiding voor Taal (OSD Language) geel gemarkeerd wordt. Met de pijltjestoetsen
Links/Rechts kunt u het menu in de volgende talen instellen: NEDERLANDS,
DUITS, SPAANS, PORTUGEES, FRANS,
ENGELS.
2. TT Taal
Druk op de Omhoog/omlaag toets om TT te kiezen, druk daarna op OK om het submenu te openen. Druk op
Omhoog/Omlaag/Links/Rechts om te selecteren.
3. Slechthorenden (niet beschikbaar in de AV)
Druk op de Omhoog/omlaag toets om
Slechthorenden (Hearing impaired) te selecteren, druk daarna op OK om Aan
(On) of Uit (Off) te selecteren.
4. PVR Bestandssysteem (niet beschikbaar in de AV)
Druk op de Omhoog/omlaag toets om PVR
File System te kiezen, druk daarna op
OK om Aan (On) of Uit (Off) te selecteren.
5. Beeldverhouding (Aspect Ratio)
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Aspect Ratio geel gemarkeerd wordt, Druk daarna op OK om het submenu te openen. Druk op de Omhoog/Omlaag toets om Aspect Ratio te kiezen.(Beschikbare opties: Auto; 4:3; 16:9; ZOOM1; ZOOM 2.)
6. Blauw scherm
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Blauw scherm (Blue Screen) geel gemarkeerd wordt. Druk daarna op OK om Aan (On) of Uit (Off) te kiezen.
7. Eerste installatie (niet beschikbaar in de AV)
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Eerste installatie (First Time Installation) geel gemarkeerd wordt. Druk daarna op
OK om de relevante opties in te stellen, waaronder OSD-taal, land en afstemming.
8. Reset
Druk op de pijltjestoetsen Omhoog/Omlaag om Reset te selecteren, druk daarna op
OK om een dialoogmenu te openen. Met de pijltjestoets Links kunt u door YES (Ja) te selecteren de fabrieksinstellingen herstellen voor naar keuze OSD-taal, land en het bedienen van kanaalafstemming.
9. Software Update (USB)
Druk op Omhoog/omlaag om Software
Update (USB) te kiezen, druk daarna op
OK om de update van de software uit te voeren met behulp van USB.
D 29
Invoermodus: ATV
1.Druk op de Menu -toets om het hoofdmenu te openen.
2.Gebruik de pijltjestoets Rechts om het kanaal (CHANNEL) het beeld (PICTURE), het geluid (SOUND), de tijd
( TIME), het slot (LOCK) of de instellingen (SETUP) te selecteren.
3.Druk op de EXIT-toets om het menu te sluiten.
NAAM VAN MENU
SUBMENU
KANAAL
INSTRUCTIES
1. Automatisch zoeken/afstemmen
Druk op de pijltjestoetsen Omhoog/Omlaag om Automatisch zoeken (Auto Tuning) te selecteren, druk daarna op OK om het automatisch zoeken te starten.
KANAAL CHANNEL
Move Return
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Program Edit
Select
1 C-03
2 C-04
3 C-045
Program Edit
ATV
ATV
ATV
Exit
2. DTV Handmatig afstemmen
Druk op de pijltjestoetsen Omhoog/Omlaag om DTV Handmatig afstemmen te selecteren, druk daarna op OK om het wachtwoord in te voeren en het submenu te openen.
(Standaardwachtwoord is ‘0000’).
3. ATV Handmatig afstemmen
Druk op de pijltjestoetsen Omhoog/Omlaag om
ATV Handmatig afstemmen te selecteren, druk daarna op OK om het wachtwoord in te voeren en het submenu te openen.
(Standaardwachtwoord is ‘0000’).
4. Programma bewerken
Druk op de Omhoog/omlaag toets om
Programma bewerken (Program Edit) te selecteren, druk daarna op OK om het submenu te openen.)
Deze optie heeft vijf functies.
Gebruik de rode toets om het huidige kanaal te wissen.
Gebruik de groene toets om het huidige kanaal te hernoemen.
Gebruik de gele toets om het huidige kanaal te verplaatsen.
Gebruik de blauwe toets om het huidige kanaal over te slaan.
Gebruik de FAV toets om het huidige kanaal als favoriet in te stellen. Als het huidige kanaal al een van uw favorieten is, drukt u nogmaals op de FAV toets om het kanaal als normaal kanaal te kiezen.
D elete
OK
Rename
Fav
Move Skip
Menu
D 30
TITEL MENU
BEELD
SUBMENU BEELD
Move Return
Picture mode Standard
Contrast 50
Brightnes
Colour 50
0
Tint 50
Sharpness 30
Colour Temp Normal
Noise Reduction Middle
Select Exit
INSTRUCTIES
1. Beeldmodus
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor de Beeldmodus (Picture Mode) geel gemarkeerd wordt. Met de pijltjestoetsen
Links/Rechts kunt u een beeldmodus selecteren (DYNAMIC, STANDARD, MILD,
PERSONAL).
2. Contrast
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
CONTRAST geel gemarkeerd wordt. Met de pijltjestoetsen Links/Rechts kunt u het contrast aanpassen. Dit kan alleen worden aangepast in de PERSONAL-modus.
3. Helderheid
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Helderheid (Brightness) geel gemarkeerd wordt. Met de pijltjestoetsen Links/Rechts kunt u de helderheid aanpassen. Dit kan alleen worden aangepast in de
PERSONAL-modus.
4. Kleur
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
KLEURINSTELLING (COLOUR SETTING) geel gemarkeerd wordt. Met de pijltjestoetsen Links/Rechts kunt u de kleur aanpassen. De kleur neemt toe wanneer het cijfer hoger wordt.
5. Kleurschakering
Gebruik de Omhoog/omlaag pijltjestoetsen om de TINT indicator geel te markeren. Met de pijltjestoetsen Links/Rechts past u de kleurschakering aan als uw systeem de
NTSC-norm heeft.
6. Scherpte
Gebruik de Omhoog/omlaag pijltjestoetsen om de SCHERPTE (SHARPNESS) indicator geel te markeren. Met de pijltjestoetsen
Links/Rechts past u de scherpte aan.
D 31
BEELD
NAAM VAN MENU
Move Return
Picture mode Standard
Contrast 50
Brightnes
Colour 50
0
Tint 50
Sharpness 30
Colour Temp Normal
Noise Reduction Middle
Select Exit
SUBMENU GELUID
7. Kleurtemperatuur
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Kleurtemperatuur (Color Temperature) geel gemarkeerd wordt. Met de pijltjestoetsen
Links/Rechts kunt u de voor uw ogen optimale kleurtemperatuur selecteren. U kunt kiezen tussen Normaal (Normal), Warm, en
Koud (Cold).
8. Ruisonderdrukking
U kunt met behulp van de pijltjestoetsen
Links/Rechts om het niveau van het geluid van de video te onderdrukken (Noise
Reduction) als de signaalontvangst zwak is.
INSTRUCTIES
GELUID
Move Return
Sound Mode Standard
Treble 50
Bass 50
Balance 0
Auto Volume Off
SPDIF Mode Off
AD Switch Off
Select Exit
1. Geluidsmodus
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor de
Geluidsmodus (Sound Mode) geel gemarkeerd wordt. Met de pijltjestoetsen
Links/Rechts kunt u een geluidsmodus selecteren. U kunt kiezen uit Standaard
(STANDARD), Film (MOVIE), Muziek
(MUSIC), Sport (SPORTS), Persoonlijk
(PERSONAL).
2. Hoge tonen
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Hoge tonen (TREBLE) geel gemarkeerd wordt. Met de pijltjestoetsen Links/Rechts kunt u de hoge tonen aanpassen. Deze kunnen alleen worden aangepast in de
Persoonlijke modus (PERSONAL).
3. Lage tonen
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Lage tonen (Bass) geel gemarkeerd wordt.
Met de pijltjestoetsen Links/Rechts kunt u de lage tonen aanpassen. Deze kunnen alleen worden aangepast in de Persoonlijke modus (Personal).
4. Balans
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
BALANS (BALANCE) geel gemarkeerd wordt. Met de pijltjestoetsen Links/Rechts kunt u de balans aanpassen.
5. Automatische volumeregeling
Druk op de Omhoog/Omlaag pijltjestoetsen om de indicator voor Automatische volumeregeling (Auto Volume Control,
AVL) geel te markeren. Druk daarna op
OK om Aan (On) of Uit (Off) te selecteren.
6. SPDIF modus
Druk op de Omhoog/omlaag toets om de
SPDIF modus te selecteren, druk daarna op
OK om Auto/PCM/Off te kiezen.
7. AD Keuze
Druk op de Omhoog/omlaag toets om AD keuze te selecteren, daarna drukt u op
OK om Aan (On) of Uit (Off) te kiezen.
D 32
NAAM VAN MENU
TIJD
NAAM VAN MENU
SLOT
Move
SUBMENU TIME
Sleep Timer
Auto Standby
OSD Timer
Off
Off
5 S
SUBMENU SLOT
Move
Return
Return
Block
Select
Lock System
Set Password
Off
Block Program
Parental Guidance Off
Key Lock Off
Select
Exit
Exit
INSTRUCTIES
1. Slaaptimer
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Slaaptimer (Sleep Timer) geel gemarkeerd wordt. Met de pijltjestoetsen Links/Rechts kunt u de slaaptimer selecteren.
2. Auto Standby
Druk op de Omhoog/omlaag toets om Auto
Standby te selecteren, druk daarna op
OK om in het submenu te komen. Druk op de Omhoog/Omlaag/Links/Rechts toetsen om te selecteren.
3. OSD Timer (Toon op scherm)
Gebruik de Omhoog/omlaag pijltjestoetsen om de OSD-timer indicator geel te markeren. Gebruik de Links/rechts pijltjestoetsen om het OSD Timer scherm te selecteren.
INSTRUCTIES
1. Systeemblokkering
Druk op de pijltjestoetsen Omhoog/Omlaag om Lock System te selecteren, druk daarna op OK om de volgende drie opties te laten gelden. (Het standaard wachtwoord is
‘0000’).
2. Instellen wachtwoord
Druk op de Omhoog/omlaag toets om
Instellen wachtwoord (Set password) te submenu te openen om een nieuw wachtwoord in te stellen.
3. Programma blokkeren
Druk op de Omhoog/omlaag toets om Block
Program te selecteren, druk daarna op
OK om het submenu te openen.
Druk op de Omhoog/omlaag toets om het programma te kiezen dat u wilt blokkeren, druk daarna op de gele toets op de afstandsbediening. (Om de blokkering van het programma op te heffen, voert u het door u ingestelde wachtwoord in.)
Druk op OK om de instelling te bewaren en druk op de menutoets om terug te keren naar het vorige menu.
4. Kinderslot (Parental Guidance) (niet beschikbaar in ATV)
Druk op de Omhoog/omlaag toets om
Kinderslot (Parental Guidance) te selecteren, druk daarna op OK om het submenu te openen.
(Beschikbare opties zijn: Uit (Off), 4-18)
5. Toetsenblokkering
Druk op de pijltjestoetsen Omhoog/Omlaag om de aanduiding voor Toetsenblokkering
(Key Lock) geel te markeren. Met de pijltjestoetsen Links/Rechts kunt u de optie
Aan (On) of Uit (Off) selecteren. Als
Toetsenblokkering is ingeschakeld (On), functioneren de toetsen niet.
D 33
NAAM VAN MENU
INSTELLINGEN
SETUP
Move
SUBMENU
INSTELLINGEN
Please select an OSD Language
English Espanol Francais
Deutsch
Return
OSD Language English
TT Language West
Hearing Impaired Off
PVR File System
Aspect Ratio 16:9
Off Blue Screen
First Time Installation
Reset
Software Update(USB)
Portugues
OK
Select Exit
Nederlands
INSTRUCTIES
1. OSD Taal
Zorg met de pijltjestoetsen Omhoog/Omlaag dat de aanduiding voor Taal (OSD Language) geel gemarkeerd wordt. Met de pijltjestoetsen
Links/Rechts kunt u het menu in de volgende talen instellen: NEDERLANDS,
DUITS, SPAANS, PORTUGEES, FRANS,
ENGELS.
2. TT Taal
Druk op de Omhoog/omlaag toets om TT te kiezen, druk daarna op OK om het submenu te openen. Druk op
Omhoog/Omlaag/Links/Rechts om te selecteren.
3. Slechthorenden
Druk op de Omhoog/omlaag toets om
Slechthorenden (Hearing impaired) te selecteren, druk daarna op OK om Aan
(On) of Uit (Off) te selecteren.
4. PVR Bestandssysteem
Druk op de Omhoog/omlaag toets om PVR
File System te kiezen, druk daarna op
OK om Aan (On) of Uit (Off) te selecteren.
5. Beeldverhouding (Aspect Ratio)
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Aspect Ratio geel gemarkeerd wordt, Druk daarna op OK om het submenu te openen. Druk op de Omhoog/Omlaag toets om Aspect Ratio te kiezen.(Beschikbare opties: Auto; 4:3; 16:9; ZOOM1; ZOOM 2.)
6. Blauw scherm
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Blauw scherm (Blue Screen) geel gemarkeerd wordt. Druk daarna op OK om Aan (On) of Uit (Off) te kiezen.
7. Eerste installatie
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Eerste installatie (First Time Installation) geel gemarkeerd wordt. Druk daarna op
OK om de relevante opties in te stellen, waaronder OSD-taal, land en afstemming.
8. Reset
Druk op de pijltjestoetsen Omhoog/Omlaag om Reset te selecteren, druk daarna op
OK om een dialoogmenu te openen. Met de pijltjestoets Links kunt u door YES (Ja) te selecteren de fabrieksinstellingen herstellen voor naar keuze OSD-taal, land en het bedienen van kanaalafstemming.
9. Software Update (USB)
Druk op Omhoog/omlaag om Software
Update (USB) te kiezen, druk daarna op
OK om de update van de software uit te voeren met behulp van USB.
D 34
Invoermodus: DTV
1.Druk op de Menu -toets om het hoofdmenu te openen.
2.Gebruik de pijltjestoets RECHTS om het slot (LOCK) het beeld (PICTURE), het geluid (SOUND), de tijd
( TIME) of de instellingen (SETUP) te selecteren.
3.Druk op de Exit-toets om het menu te sluiten
NAAM VAN MENU MENU KANAAL INSTRUCTIES
CHANNEL
Move Return
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
Signal Information
CI Information
Select
DTV Manual Tuning
- UHF CH 12 +
Exit
1. Automatische afstemming (Auto Tuning)
Selecteer met de Omhoog/Omlaag toets automatische afstemming (Auto Tuning), druk daarna op OK om het automatisch zoeken te starten.
2. DTV Handmatig afstemmen (Manual
Tuning)
Druk op de pijltjestoetsen Omhoog/Omlaag om DTV Handmatig afstemmen te selecteren, druk daarna op OK om het wachtwoord in te voeren en het submenu te openen.
(Standaardwachtwoord is ‘0000’)
Druk op de Links/Rechts toets om het kanaal te selecteren, druk daarna op OK om een programma te zoeken.
CHANNEL
Bad
No Signal
Freq: 226.25Mhz
Good xi
ATV Manual Tuning
Current CH 45
Color System Auto
Sound System BG
Fine-Tune 55.25
AFC On
Search
Menu t
3. ATV Handmatig afstemmen (Manual
Tuning)
Druk op de pijltjestoetsen Omhoog/Omlaag om ATV Handmatig afstemmen te selecteren, druk daarna op OK om het wachtwoord in te voeren en het submenu te openen.
(Standaardwachtwoord is ‘0000’)
• Druk op de Links/Rechts toets om het kanaalnummer dat u wilt opslaan te selecteren.
• Druk op de Omhoog/Omlaag toets om de tweede optie te selecteren. Druk op de
Links/Rechts toets om het audiosysteem te selecteren.
• Druk op de Omhoog/Omlaag toets om het zoeken te selecteren, druk daarna op
OK om het afstemmen te starten.
4. Programma bewerken
Druk op de Omhoog/omlaag toets om
Programma bewerken (Program Edit) te selecteren, druk daarna op OK om het submenu te openen.)
D 35
NAAM VAN MENU MENU KANAAL
Program Edit
1 7 Digital
2 7 HD Digital
3 7 Digital 1
4 7 Digital 2
5 7 Digital 3
6 AFD0, 16:9
7 AFD0, 4:3
8 AFD1, 16:9
9 AFD1, 4:3
10 AFD2, 16:9
D e l e t e
OK Fav
S
Menu ik p
L
INSTRUCTIES
Deze optie heeft meerdere functies.
Gebruik de blauwe toets om het huidige kanaal over te slaan.
Gebruik de FAV toets om het huidige kanaal als favoriet in te stellen. Als het huidige kanaal al een van uw favorieten is, drukt u nogmaals op de FAV toets om het kanaal als normaal kanaal te kiezen.
5. Signaalinformatie
Druk op de Omhoog/Omlaag toets om
Signaalinformatie (Signal information) te selecteren, druk daarna op OK om signaalgegevens weer te geven, waaronder kanaalnummer, frequentie, kwaliteit en sterkte.
6. CI informatie
Druk op de Omhoog/Omlaag toets om CI informatie te selecteren, druk daarna op
OK om details weer te geven als u de
CI-kaart heeft ingevoerd.
KANAAL
--
--
--
--
--
--
--
CI Information
D 36
TITEL MENU
BEELD
SUBMENU BEELD
Move Return
Picture mode Standard
Contrast 50
Brightnes
Colour 50
0
Tint 50
Sharpness 30
Colour Temp Normal
Noise Reduction Middle
Select Exit
INSTRUCTIES
1. Beeldmodus
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor de Beeldmodus (Picture Mode) geel gemarkeerd wordt. Met de pijltjestoetsen
Links/Rechts kunt u een beeldmodus selecteren (DYNAMIC, STANDARD, MILD,
PERSONAL).
2. Contrast
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
CONTRAST geel gemarkeerd wordt. Met de pijltjestoetsen Links/Rechts kunt u het contrast aanpassen. Dit kan alleen worden aangepast in de PERSONAL-modus.
3. Helderheid
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Helderheid (Brightness) geel gemarkeerd wordt. Met de pijltjestoetsen Links/Rechts kunt u de helderheid aanpassen. Dit kan alleen worden aangepast in de
PERSONAL-modus.
4. Kleur
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
KLEURINSTELLING (COLOUR SETTING) geel gemarkeerd wordt. Met de pijltjestoetsen Links/Rechts kunt u de kleur aanpassen. De kleur neemt toe wanneer het cijfer hoger wordt.
5. Kleurschakering
Gebruik de Omhoog/omlaag pijltjestoetsen om de TINT indicator geel te markeren. Met de pijltjestoetsen Links/Rechts past u de kleurschakering aan als uw systeem de
NTSC-norm heeft.
6. Scherpte
Gebruik de Omhoog/omlaag pijltjestoetsen om de SCHERPTE (SHARPNESS) indicator geel te markeren. Met de pijltjestoetsen
Links/Rechts past u de scherpte aan.
D 37
BEELD
NAAM VAN MENU
Move Return
Picture mode Standard
Contrast 50
Brightnes
Colour 50
0
Tint 50
Sharpness 30
Colour Temp Normal
Noise Reduction Middle
Select Exit
SUBMENU GELUID
7. Kleurtemperatuur
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Kleurtemperatuur (Color Temperature) geel gemarkeerd wordt. Met de pijltjestoetsen
Links/Rechts kunt u de voor uw ogen optimale kleurtemperatuur selecteren. U kunt kiezen tussen Normaal (Normal), Warm, en
Koud (Cold).
8. Ruisonderdrukking
U kunt met behulp van de pijltjestoetsen
Links/Rechts om het niveau van het geluid van de video te onderdrukken (Noise
Reduction) als de signaalontvangst zwak is.
INSTRUCTIES
GELUID
Move Return
Sound Mode Standard
Treble 50
Bass 50
Balance 0
Auto Volume Off
SPDIF Mode Off
AD Switch Off
Select Exit
1. Geluidsmodus
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor de
Geluidsmodus (Sound Mode) geel gemarkeerd wordt. Met de pijltjestoetsen
Links/Rechts kunt u een geluidsmodus selecteren. U kunt kiezen uit Standaard
(STANDARD), Film (MOVIE), Muziek
(MUSIC), Sport (SPORTS), Persoonlijk
(PERSONAL).
2. Hoge tonen
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Hoge tonen (TREBLE) geel gemarkeerd wordt. Met de pijltjestoetsen Links/Rechts kunt u de hoge tonen aanpassen. Deze kunnen alleen worden aangepast in de
Persoonlijke modus (PERSONAL).
3. Lage tonen
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Lage tonen (Bass) geel gemarkeerd wordt.
Met de pijltjestoetsen Links/Rechts kunt u de lage tonen aanpassen. Deze kunnen alleen worden aangepast in de Persoonlijke modus (Personal).
4. Balans
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
BALANS (BALANCE) geel gemarkeerd wordt. Met de pijltjestoetsen Links/Rechts kunt u de balans aanpassen.
5. Automatische volumeregeling
Druk op de Omhoog/Omlaag pijltjestoetsen om de indicator voor Automatische volumeregeling (Auto Volume Control,
AVL) geel te markeren. Druk daarna op
OK om Aan (On) of Uit (Off) te selecteren.
6. SPDIF modus
Druk op de Omhoog/omlaag toets om de
SPDIF modus te selecteren, druk daarna op
OK om Auto/PCM/Off te kiezen.
7. AD Keuze
Druk op de Omhoog/omlaag toets om AD keuze te selecteren, daarna drukt u op
OK om Aan (On) of Uit (Off) te kiezen.
D 38
NAAM VAN MENU
TIJD
NAAM VAN MENU
SLOT
Move
Move
MENU TIJD
Return
MENU SLOT
Return
Block
Clock
Time Zone
Sleep Timer
Auto Standby
OSD Timer
01/Jan 01:39
GMT
Off
Off
5 S
Select
Lock System
Set Password
Off
Block Program
Parental Guidance Off
Key Lock Off
Select
Exit
Exit
INSTRUCTIES
1. Klok
Toont de huidige systeemtijd. Niet beschikbaar.
2. Tijdzone
Druk op de Omhoog/omlaag toets om
Tijdzone (TIME ZONE) te selecteren, druk daarna op OK om het submenu te openen. Druk op
Omhoog/Omlaag/Links/Rechts om de tijdzone te selecteren.
3. Slaaptimer
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Slaaptimer (Sleep Timer) geel gemarkeerd wordt. Met de pijltjestoetsen Links/Rechts kunt u de slaaptimer selecteren.
4. Auto Standby
Selecteer met de pijltjestoetsen
Omhoog/Omlaag Auto Standby, druk daarna op OK om het submenu te openen. Druk op Omhoog/Omlaag/Links/Rechts om te selecteren.
5. Timer op het scherm (OSD Timer)
Gebruik de Omhoog/omlaag pijltjestoetsen om de OSD Timer geel te markeren. Gebruik de
Links/Rechts pijltjestoetsen om de OSD
Timer op het scherm te selecteren.
INSTRUCTIES
1. Systeemblokkering
Druk op de pijltjestoetsen Omhoog/Omlaag om Systeemblokkering (Lock System) te selecteren, druk daarna op OK om de volgende 3 opties in te schakelen. (Standaard wachtwoord is ‘0000’.)
2. Wachtwoord instellen
Druk op de Omhoog/Omlaag toets om
Wachtwoord instellen (Set Password) te selecteren, druk daarna op OK om het submenu te openen om een nieuw wachtwoord in te stellen.
3. Programma blokkeren
Druk op de Omhoog/omlaag toets in om
Programma blokkeren (Block Program) te selecteren, druk daarna op OK om het submenu te openen
Druk op de Omhoog/Omlaag toets om het programma te selecteren dat u wilt afsluiten, druk daarna op de gele toets op de afstandsbediening. (Om de blokkering van het programma weer op te heffen, voert u het door u ingestelde wachtwoord in).
Druk op OK om de instelling op te slaan en op de menutoets om naar het voorgaande menu te gaan.
4. Kinderslot (Parental Guidance)
Druk op de Omhoog/omlaag toets om
Kinderslot (Parental Guidance) te selecteren, druk daarna op OK om het submenu te openen.
(Beschikbare opties zijn: Uit (Off), 4-18).
5. Toetsenblokkering
Druk op de pijltjestoetsen Omhoog/Omlaag om de aanduiding voor Toetsenblokkering
(Key Lock) te kiezen, druk daarna op
Links/Rechts toets om Aan (On) of Uit (Off). te selecteren. Als Toetsenblokkering is ingeschakeld (On), functioneren de toetsen niet
D 39
NAAM VAN MENU
INSTELLINGEN
SETUP
Move
SUBMENU
INSTELLINGEN
Please select an OSD Language
English Espanol Francais
Deutsch
Return
OSD Language English
TT Language West
Hearing Impaired
PVR File System
Off
Aspect Ratio
Blue Screen
First Time Installation
16:9
Off
Reset
Software Update(USB)
Portugues
OK
Select
Nederlands
Exit
INSTRUCTIES
1. OSD Taal
Zorg met de pijltjestoetsen Omhoog/Omlaag dat de aanduiding voor Taal (OSD Language) geel gemarkeerd wordt. Met de pijltjestoetsen
Links/Rechts kunt u het menu in de volgende talen instellen: NEDERLANDS,
DUITS, SPAANS, PORTUGEES, FRANS,
ENGELS.
2. TT Taal
Druk op de Omhoog/omlaag toets om TT te kiezen, druk daarna op OK om het submenu te openen. Druk op
Omhoog/Omlaag/Links/Rechts om te selecteren.
3. Slechthorenden
Druk op de Omhoog/omlaag toets om
Slechthorenden (Hearing impaired) te selecteren, druk daarna op OK om Aan
(On) of Uit (Off) te selecteren.
4. PVR Bestandssysteem
Druk op de Omhoog/omlaag toets om PVR
File System te kiezen, druk daarna op
OK om Aan (On) of Uit (Off) te selecteren.
5. Beeldverhouding (Aspect Ratio)
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Aspect Ratio geel gemarkeerd wordt, Druk daarna op OK om het submenu te openen. Druk op de Omhoog/Omlaag toets om Aspect Ratio te kiezen.(Beschikbare opties: Auto; 4:3; 16:9; ZOOM1; ZOOM 2.)
6. Blauw scherm
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Blauw scherm (Blue Screen) geel gemarkeerd wordt. Druk daarna op OK om Aan (On) of Uit (Off) te kiezen.
7. Eerste installatie
Zorg met behulp van de pijltjestoetsen
Omhoog/Omlaag dat de aanduiding voor
Eerste installatie (First Time Installation) geel gemarkeerd wordt. Druk daarna op
OK om de relevante opties in te stellen, waaronder OSD-taal, land en afstemming.
8. Reset
Druk op de pijltjestoetsen Omhoog/Omlaag om Reset te selecteren, druk daarna op
OK om een dialoogmenu te openen. Met de pijltjestoets Links kunt u door YES (Ja) te selecteren de fabrieksinstellingen herstellen voor naar keuze OSD-taal, land en het bedienen van kanaalafstemming.
9. Software Update (USB)
Druk op Omhoog/omlaag om Software
Update (USB) te kiezen, druk daarna op
OK om de update van de software uit te voeren met behulp van USB.
D 40
LED
1366*768
LED 48
1366*768
AUTO
2 x 5 Watt
33 W
Afstandsbediening, voedingsadapter, voedingskabel, twee AAA-batterijen, instructiehandle iding, garantiekaart
Schroevendraaier met schroeven (3 stuks)
TV voet
D 41
D 42
E
D 43
D 28
D 44
OK
OK
D 45
D 46
[ Repeat ]
D 47
D.DISP
D.DISP
D.DISP
D.DISP
D.DISP
D.DISP
D.DISP
D.DISP
D.DISP
D.DISP
D 48
8
9
10 [ Subtitles ]
D 49
12
D 50
13
D 51
10+
D 52
10+
D 53
4
OK
OK
D 54
SCREEN SAVER
Selecteer de screensaver aan of uit.
D 55
D 56
OK
OK
OK
ENGLISH
GERMAN
SPANISH
PRENCH
PORTUGUESE
DUTCH
OK
PORTUGEES
D 57
OK
ENGLISH
GERMAN
SPANISH
PRENCH
PORTUGUESE
DUTCH
OK
PORTUGEES
OK
ENGLISH
GERMAN
SPANISH
PRENCH
PORTUGUESE
DUTCH
OFF
OK
PORTUGEES
D 58
ENGLISH
GERMAN
SPANISH
PRENCH
PORTUGUESE
DUTCH
OK
PORTUGEES OK
D 59
D 60
Bevestiging van de voet en wandmontage instructies
1. Bevestiging van de voet
Om de voet te bevestigen, plaatst u de voet aan de onderzijde van de TV en bevestigt u de 3 schroeven met een schroevendraaier.
2. Wandmontage
Vier schroefgaten voor bevestiging aan de wand
Draai de vier schroeven los om de standaard te verwijderen
D 61
Instructies met betrekking tot de bescherming van het milieu
Gooi dit apparaat aan het einde van de levensduur niet weg bij het huishoudelijke afval. Lever het apparaat in bij een inzamelpunt voor het recyclen van elektrische en elektronische apparatuur. Het symbool op het product, de gebruiksinstructies of de verpakking biedt informatie over de wijze waarop het product moet worden weggegooid.
De materialen zijn recycleerbaar zoals door de desbetreffende markeringen wordt aangeduid. Door recyclen, het recyclen van materialen of andere vormen van hergebruik van oude apparatuur, levert u een belangrijke bijdrage aan de bescherming van het milieu.
Raadpleeg de lokale instanties voor meer informatie over de officiële locatie waar het apparaat kan worden ingeleverd.
D 62
Part 1 : LED TV OPERATION
1- Important Safety Precaution
Incorrect usage will cause fire or electric shock. To prevent this, please do as required when you are installing, using and cleaning this machine. To insure your safety and extend the life span of LED-TV, please read the following items carefully before using:
The On/Off key on this product does not fully disconnect the TV from the main power supply. Unplug the power cord from the AC outlet before connecting any Audio / Video cables to the LED TV.
Do not place the LED TV on any unstable surface or furniture. Which may cause the product to fall, resulting in serious personal injuries and damage the product. Only place on stable furniture, recommended for LED TV by its manufacturer.
The LED panel used in this product is made of glass. Do not drop or impact the product with other objects, it may cause the panel broken. Be careful with the broken glasses in case the panel is broken.
The vents and openings at the back of the products are designed for ventilation. Do not cover or block these vents and openings. Insufficient ventilation may cause overheating and / or shorten the life of the product. Do not insert any foreign objects
(metals or flammable objects) into the TV, which may cause electric shock or fire.
Do not place the LED TV close to other furniture, furnishing or electronic products.
This product is not designed for built-in installation; do not place in an enclosed place without proper ventilation.
Keep this product away from direct sunlight or any heat sources such as radiator, heaters,stoves,and other heat generating products (including adaptors and amplifiers).
Do not use this product in wet and moist area or near water, such as kitchen sink, bathtub, washbasin, laundry tub, swimming pool or a wet basement.
Do not place any water container on top of this product. The water may spill onto the product causing electric shock or fire.
Do not place any type of candle or naked flames on the top or near the LED TV, which may cause fire.
To clean the cabinet and LED panel, unplug the Power cord, use only a clean soft moistened cloth and gently wipe the display panel. Hard cloth may scratch the panel surface. Never use dirty cloth, liquid cleaners or chemical cloth to clean it; such materials may damage the LED panel.
Do not remove cover; there are no serviceable parts inside. Refer servicing to qualified services personnel only.
E 1
2- Main functions
1- Can be connected with analog RGB input
2- Can be connected with CVBS input
3- Can be connected with HDMI input.
4- Can receive SCART signal
5- Can receive TV signal
6- Built-in 2 x 5W speakers, 2 sets audio input
7- Full function Infra-red remote control
8- Coaxial Audio output
9- Support USB for PVR and Media play
10- Support CI slot
11- Support DVD playback
3- Fitting the Remote Control Batteries
The remote unit is operated with 2 x AAA size batteries.
1. Push and hold the hook, the battery cover is opened.
2. Insert batteries according to the polarity marks.
3. Replace the cover.
Remarks:
Battery replacement is necessary when the remote control fails to operate the TV set.
Battery Cautions
Incorrect use of batteries can cause chemical leakage, which will corrode the Remote
Control Unit or cause the batteries to burst.
1. Always replace batteries as a pair. Always use new batteries when replacing
the old set.
E 2
2. Do not combine a used battery with a new one or mix battery type (Zinc Carbon with
Alkaline).
3. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
4. Dispose the used batteries according to your local authorities guidelines. Do not put it into your household waste.
4- Product Overview
5- Control Panel Overview
INPUT MENU VOLVOL+ CH.CH.+ STANDBY
STANDBY
1. Control Panel Functions:
1- SOURCE – Select the input signals:
ATV/DTV/Media/AV/PC/Component/DVD/SCART/HDMI1/HDMI2
2- MENU – Enter into MENU
3- VOL- – Volume down / Left orientation
4- VOL+ – Volume up / Right orientation
5- CH- – TV channel down
6- CH+ – TV channel up
7- STANDBY – Switches the TV to standby and on again
8- – OPEN/CLOSE in DVD mode.
9- – PLAY/PAUSE in DVD mode.
E 3
Indicator Light Status
When the unit is on, the indicator light turns blue. The indicator light is red when the TV is in standby mode.
(3) Illustration of Connectors
DC IN USB HDMI1 HDMI2 SCART PC AUDIO VGA
1 2 3 4 5 6
Connector’s descriptions
1. DC 12V power input for the LED TV, connects power supply adaptor here.
2. Connects to portable USB device.
3. High Quality Audio/Video input socket for connecting an external
device fitted with an HDMI output.
4. Scart input interface; connects your AV system with Scart output.
5. Audio input for VGA mode, connects to your PC audio output.
6. DB15 VGA interface.
7. Coaxial Output, connecting to Coaxial input of your Amplifier.
8. Headphone output
9. YPBPR/Component input, connects your AV system.
10. CVBS / Composite video inputs, connects your AV system.
11. Right/Left Audio Channel input for Composite video & component mode.
12. 75 Ω aerial input, connects antenna connector or aerial interface here to receive
cable / aerial signal.
13. PCMCIA input, the card reader input CI (Common interface this requires
CAM (conditional access module) used for pay TV.
E 4
E 5
OK
7- Connection between different input signals
A) Connect with PC signal
You can use your LED-TV as a monitor for your personal computer using a VGA cable(not supplied).
2. PC Audio Input
3. DC12V power input
DC IN USB HDMI1 HDMI2 SCART PC AUDIO VGA
Connection steps
3 2 1
* Read the user guide supplied with your computer and ensure that it has a VGA connector;
* Make sure that the power of the LED-TV and the PC are off;
* Connect a D type 15-pin VGA interface cable (not supplied) to the VGA video interface
connector on the PC. Then connect the other end to the VGA video interface connector
on the back of the LED-TV. Tighten the screws on the VGA connectors once they are
firmly connected;
* Connect the DC 12V power input with the adaptor come with your LED TV.
* Turn on the power of the LED-TV first, and then turn on the power of the PC;
* Press the SOURCE button to set the video input mode of the LED-TV to “PC”;
* Use the VOL- / VOL+ on the control panel or remote control to adjust the volume.
E 6
B) Connect to external AV devices using Composite and YPBPR inputs
1. Left & Right Audio input.
2. CVBS / composite video input.
3. YPBPR/component Input.
4. DC12V power input
DC IN USB HDMI1 HDMI2 SCART PC AUDIO VGA
Connection steps
4
* Read the user guide supplied with your AV devices and ensure that it has Composite or S-Video connectors;
* Make sure that the power of the LED-TV and the AV device are off;
* Connect a Composite video cable (not supplied) to the yellow composite video connector input on the back of the LED-TV. Now insert the other end of the composite cable into the yellow composite connector output on the AV device;
* Connect a YPBPR Cable (not supplied, provide better image quality) to the YPBPR connector on the back of the LED-TV. Now insert the other end of the
YPBPR cable into the YPBPR connector on the AV device;
* Connect the RCA audio cables (not supplied, white and red connectors) from the AV devices’ RCA audio output connectors to the RCA audio input connectors on the back of the LED-TV;
* Turn on the power of the LED-TV first, and then turn on the power of the AV device;
* Press the SOURCE button to set the video input mode of the LED-TV to “YPBPR” mode or “AV” mode;
(C) Connect with TV signal
1. Antenna / 75Ω aerial input.
2. DC 12V power input.
DC IN USB HDMI1 HDMI2 SCART PC AUDIO VGA
2
E 7
Connection steps
* Make sure that the power of the LED-TV is off;
* Connect an antenna cable (CATV) to the corresponding interface connector
(75 Ω ANT) on the back of the LED-TV. Connect the other end of the antenna cable to
the antenna connector on the wall or on your digital cable / satellite receiver.
Now you are able to view regular cable TV;
* Turn on the power of the LED-TV;
* Press the SOURCE button to set the video input mode of the LED-TV to “ATV” or “DTV”
mode. The channel number appears in the top right side of the screen;
* When channels are not programmed a blue screen will appear with go around
grey screen with the text “NO SIGNAL’’.
On the LED MENU you can read how the channels can be programmed
(auto search or manual search).
It is recommended first to let the channels automatically to be searched.
* You can use key CH + / CH- button or the number keys on the remote control to
select the channel you want to watch;
(D) Connect with SCART signal
1. Scart input.
2. DC 12V power input.
DC IN USB HDMI1 HDMI2 SCART PC AUDIO VGA
Connection steps:
2 1
* Read the user guide supplied with your AV devices and ensure that it has a scart
connector;
* Make sure that the power of the LED-TV is off;
* Connect a SCART cable to the corresponding interface connector on the back of the
LED-TV;
* Turn on the power of the LED-TV;
* Press the SOURCE button to set the video input mode of the LED-TV to “SCART” mode;
E 8
E) Connect with external device( USB )
1. External device input.
2. DC 12V power input.
external device the external device
LED
SOURCE
F) Connect with HDMI signal
1. HDMI x2 input
2. DC 12V power input.
DC IN USB HDMI1 HDMI2 SCART PC AUDIO VGA
2 external
1 the
LED Media
DC IN USB HDMI1 HDMI2 SCART PC AUDIO VGA
Connection steps:
2 1
* Read the user guide supplied with your AV devices and
ensure that it has a HDMI
* Make sure that the power of the LED-TV is off;
* Connect a HDMI cable to the corresponding interface connector on the back of the
LED-TV;
* Turn on the power of the LED-TV;
* Press the SOURCE button to set the video input mode of the LED-TV to “HDMI1” or
“HDMI2” mode;
E 9
8- Basic operating instructions
Turn on the LED-TV
When the STANDBY button is pressed and the LED-TV is turned on, the indicator light on the front of the LED-TV changes from red to blue.
When the LED-TV is turned on, the input mode is displayed on the screen.
When the LED-TV is turned off using the STANDBY button, the LED-TV will go into standby mode and the indicator light turns red.
Energy Saving
Regarding to energy saving this TV has a standard stand-by timer of 4 hours.
We recommend to use this timer but if you want to turn this timer off you can do this by going to the time menu.
Switch Among Different Inputs :
ATV/DTV/Media/AV/PC/Component/DVD/SCART/HDMI1/HDMI2
Press the Source button to display the inputs mode menu, then press / key to select a input source and press OK key to confirm.
Audio control
1. Press the VOL+ button to increase the volume.
A number will appear on screen indicating the volume level.
2. Press the VOL - button to decrease the volume.
A number will appear on screen indicating the volume level.
E 10
Mute
1. Press the MUTE button to mute the sound temporarily.
A Mute icon appears on the screen.
MUTE
2. Press the MUTE button again to restore the sound.
The Mute icon disappears.
Note
When you turn the LED-TV off, the mute function is cancelled automatically.
Select the TV channel you want
You can use the number keys on the remote control to directly select TV channels.
The LED-TV can store up to 99 channels (1 to 99), and you can press the keys on the remote control or on the panel to make a selection.
1- Press the relevant key on the remote control if you want to choose any channel from 1 to 9. (For example: if you want to choose channel 8, just press the key number 8).
Select the DTV channel you want
There are four ways of channel selection as follows:
1. Stepping through the channel list:
Press the CH+ button to browse up and the CH- button to browse down the available channels.
2. Selection by number:
Enter the complete channel number directly using the numerical buttons to select desired channel.
3. Selection by mini channel list:
It is also possible to change the channel using a mini channel list that is accessible by pressing the OK button with no other on screen display shown.Use the UP/DOWN ARROW keys to navigate and press the OK button to display the selected channel.To exit this mini channel list press the
EXIT button.
E 11
4. Selection by EPG(Electronic Programme Guide)
This function allows a channel schedule to be displayed for a time interval of one week.
1.Press the EPG button to display the Electronic Programme Guide on the screen.
PROGRAMME GUIDE
10 Apr 2007 14:00- 15:00 10 Apr 2007 14:23
Barnaby (John Nettles) questions the guilt of a woman who is on trial for the murder of her best friend.
10 Apr
14.E4
28.ITV4
32.Fitm4+1
75.CITV
14:00-15:00 Midsomer nurders
15:00-16:00
16:00-17:00
17:00-18:00
The Force
Double Indemnity
Surprisel: Brilliant Creatu.
Record
Move View
Display
Next Day
Schedule
Prev Day
Remind
OK
2.Use
UP/DOWN ARROW buttons to select the channel and press the OK button to view the channel.
ASPECT
Press to display proportion.(Auto; 4:3 ;16:9 ; ZOOM1 ; ZOOM2)
AUDIO
Usually set to stereo to provide the best reproduction, but if reception deteriorates or if the service is not available then switches to Mono.NICAM DUAL STEREO and NICAM DUAL and NICAM DUAL can also be selected if a mono signal is being transmitted.
SUBTITLES(DTV)
Press the SUBTITLE button to display Subtitle Language, and use UP/DOWN arrows to select subtitle language or Off, then press OK button to confirm it.
9- PVR operating instructions
1- PVR Function list
Record directly
Item
1. Press button to record the current program.
Press to stop recording.
2. File maximum size 3.9G byte , if the capacity is surpassed it will divide the file to deposit.
Timer record
1. Use EPG to carry on the appointment record.
2. Support periodicity record /everyday record/once-only record.
3. When the time appointment is in conflict ,it will produce a warning message.
1. Can delete a single file
Disk manager
2. Provide Disk formatting functions.
Playback 1.You can play back the recorded program in Media/USB/channel.
E 12
2- PVR Basic instructions
1. The storage location of your file
Press ▼ / ▲ button to select Option in the main menu.
Press ▼ / ▲ button to select PVR File System, then press OK button to enter.
Press ▼ / ▲ button to select Select Disk , then press OK button to enter.
Use the external device(USB) to do appointment record.
You can switch partition in this interface
Select Disk C:
Check PVR File System Start
USB Disk
Format
Time Shift Size
Speed
Free Record Limit 6 Hr.
OK Menu
OK
Select Disk
USB 0
Disk C
Menu
2 . Check the USB speed
Press ▼ / ▲ button to select Check PVR File System , then press OK button to enter .Then it will check the USB speed.
Select Disk C:
Check PVR File System Checking
USB Disk Pass
Format Pass
Time Shift Size All
Speed Checking
Free Record Limit 1 Hr.
OK Menu
3- Recording methods
Mode1: Shortcut key
1. Press button to record the current program.
Press to stop recording.
It will stop PVR.
[00:00:42] play
1 YLE TV1
FB FF Prev.
Next pause Stop
(0000:39:48)
08:38
Yes No
2. Press STOP button to stop recording ,then it will return to normal broadcast television.
E 13
3. When the storage space of Disk is insufficient, it will produce a warning message, then
it stops recording automatically and return to normal broadcast television.
4. Press index button to see the information of the recorded list .
Press DISPLAY button to see the detail of the program.
Recorded list Programme
Delete
OK
INFO index
NOTE: You can see detail about the DATE/TIME/DURATION
/PROGRAM NAME/CHANNEL NAME/DESCRIPTION
Mode2:Time shift
1. Press T.SHIFT button to start Timeshift.
play
1 YLE TV1
FB FF Prev.
Next pause Stop
[00:00:42]
(0000:39:48)
08:38
This operation can make the frame still ,and record program in the background.
Mode3:Timer
1. You can also press EPG button to set record.
Press the red button to start recording.
PROGRAMME GUIDE
10 Apr 2007 14:00- 15:00 10 Apr 2007 14:23
Barnaby (John Nettles) questions the guilt of a woman who is on trial for the murder of her best friend.
10 Apr
14.E4
28.ITV4
32.Fitm4+1
75.CITV
14:00-15:00 Midsomer nurders
15:00-16:00
16:00-17:00
The Force
Double Indemnity
17:00-18:00 Surprisel: Brilliant Creatu.
Record Display Schedule Remind
Move View Next Day Prev Day OK
2.You can choose the time of the appointment to record you want .
E 14
-
RECORDER
1 YLE TV1
Start Time
15 Minute
08Hour
Dec Month
07 Date
End Time
03 Minute
09 Hour
Dec Month
07 Date
Mode once +
O K B a c k
3.When the time appointment is in conflict ,it will produce a warning message.
Timer Overlay
21 TMF
13 Jul 2007 03:00
4 . The time of the record is coming/appearing . it will change to current channel automatically.
3 Sec.to Switch channel
Yes No
E 15
10- Media operating instructions
Note:Before operating Media menu,Plug in USB device,then press SOURCE button to set the Input Source to Media .
Press ◄ / ► button to select Media in the Source menu, then press OK button to enter.
Press ◄ / ► button to select the option you want to adjust in the main Media menu, then press OK button to enter.
Photo Menu
Press ◄ / ► button to select PHOTO in the main menu, then press OK button to enter.
Press exit button to return back to the previous menu.
Press ◄ / ► button to select drive disk you want to watch, then press OK button to enter.
Press ◄ / ► button to select return option to go back to the previous menu.
Return C D E
E 16
Win Recorder Flower.jpg
Flower00.jpg
HOME.jpg
Flower01.jpg
River.jpg
Delete
Press ◄ / ► button to select in the file selecting menu, then press OK button to display picture.
When highlighting the option you select,the file information will appear on the right and picture will be previewed in the center.
Flower00.jpg
Y R Size:
Date:
Time:
F
Resolution: 1200X900
1381KBytes
2010/05/09
16:13:25
Delete
Press ◄ / ► button to select the file folder you want to search in the file selecting menu, then press OK button on your remote control to enter sub-menu.
Press ◄ / ► button to select the file you want to delete in the file selecting menu, then press red button on your remote control and press ◄ button to delete files.
Music Menu
Press ◄ / ► button to select MUSIC in the main menu, then press OK button to enter.
Press exit button to return back to the previous menu.
Press ◄ / ► button to select drive disk you want to watch, then press OK button to enter.
E 17
Press ◄ / ► button to select return option to go back to the previous menu. When highlighting the option you select,the file information will appear on the right.
C:\ 1 1 try.mp3
happy.mp3
Delete
Win
Maybet.mp3
Record thank.mp3
angel.mp3
Album: (2005/01...
Title: 1khz-10db
Bit Rate: 320K
Artist: BCD103
Sampling: 44K
Year: 2005
Size: 2426KBytes
Press ◄ / ► button to select the file you want to listen in the file selecting menu,then press OK button to play.
Press ◄ / ► button to select menu in the bottom you want to run, then press
OK button to operate.
Press exit button to return back to the previous menu.
E 18
Movie Menu
Press ◄ / ► button to select MOVIE in the main menu, then press OK button to enter.
Press exit button to return to the previous menu.
Press ◄ / ► button to select drive disk you want to watch, then press OK button to enter.
Press ◄ / ► button to select return option to go back to the previous menu.
When highlighting the option you select,the file information will appear on the right and movie will be previewed in the center.
Press OK button to play the selected movie.
E 19
11
Digital Teletext
Some digital channels have a digital version of the traditional teletext service.Usually if the channel that you are viewing has this digital teletext there will be an on-screen display showing how this service can be accessed.For most channels that have this digital
teletext service is accessed by pressing the RED or TEXT button. Once started follow the
on-screen instruction to navigate through the available information.The standard navigation method is using the UP/DOWN/LEFT/RIGHT /ARROW buttons and the OK button.
Some services will offer shortcuts via the coloured buttons on the remote.
E 20
12
LED the SETUP
SCREEN
SCREEN MENU
SCREEN the TIME the LOCK or
Auto Adjust
Auto Adjust
H-Offset
H-Offset
SCREEN
V-Offset
Auto Adjust
H-Offset 50
V-Offset 50
Size 50
Phase 50
Position Reset ard
0
V-Offset
Exit
4. Size
Press Up /Down button to select
Size,then press OK button to enter sub-menu.Press Left / Right button to adjust display size.
E 21
PICTURE MODE
Standard;Mild;Personal)
(Dynamic;
This can only be adjusted in the PERSONAL mode.
Move Return
Picture mode Standard
Contrast 50
Brightnes
Colour 50
0
Tint 50
Sharpness 30
Colour Temp Normal
Noise Reduction Middle
This can only be adjusted in the PERSONAL mode.
Select Exit
TINT
E 22
Move
Colour temperature
Return
Picture mode Standard
Contrast 50
Brightnes
Colour 50
0
Tint 50
Sharpness 30
Colour Temp Normal
Noise Reduction Middle
COLOUR TEMPERATURE
Select Exit
(Standard;Music;Movie;Sports;Personal).
Move Return
Sound Mode Standard
Treble 50
Bass 50
Balance 0
Auto Volume Off
SPDIF Mode Off
AD Switch Off
Select Exit
Auto Volume
Press UP / Down button to select Auto
Volume, then press OK button to select On or Off.
6. SPDIF MODE
Press UP / Down button to select SPDIF
MODE, then press OK button to
select Auto\ PCM\Off .
7. AD Switch
Press UP / Down button to select AD
Switch.then press OK button to select On or Off.
E 23
LOCK
1.
Move Return
Sleep Timer
Auto Standby
OSD Timer
Off
Off
5 S
Select Exit
2. Auto Standby
Press Up / Down button to select Auto
Standby, then press OK button to enter sub-menu. Press Up / Down / Left
/Right button to select.
3.
Move
LOCK
Return
Block
Lock System
Set Password
Off
Block Program
Parental Guidance Off
Key Lock Off
Select Exit
1.
Lock System
Press Up / Down button to select Lock
System, then press OK button to make the following 3 options valid.
(Default password is ‘0000’.)
2. Set Password
Press Up / Down button to select Set
Password, then press OK button to enter sub-menu to set new password.
3. Block Program (not available in PC)
Press Up / Down button to select Block
Program, then press OK button to enter sub-menu.
Press Up / Down button to select the program you want to lock, then press yellow button on your remote control.
(To unlock program,enter the password you set.)
Press OK button to save setting and menu button to back to the previous menu
4. Parental Guidance(not available in PC)
Press Up / Down button to select
Parental Guidance, then press OK button to enter sub-menu to select.
(Available options are:Off, 4-18)
5. Key Lock
Press Up / Down button to select Key
Lock, then press Left / Right button to select “On” or “Off”, The key board will invalid if you set Key Lock “On”.
E 24
SETUP
SETUP
OSD
OSD
SETUP
Move
Deutsch
Return
Please select an OSD Language
English Espanol Francais
DUTCH,
PORTUGUESE,
OSD Language English
TT Language West
Hearing Impaired Off
PVR File System
Aspect Ratio
Blue Screen
First Time Installation
Reset
Software Update(USB)
16:9
Off
Portugues
OK
Select Exit
Nederlands
2. TT Language (not available in PC)
Press Up / Down button to select TT then press OK button to enter sub-menu.Press Up / Down / Left / Right button to select.
3. Hearing Impaired (not available in PC)
Press Up / Down button to select Hearing
Impaired, then press OK button to select On or Off.
4. PVR File System (not available in PC)
Press Up / Down button to select PVR File
System, then press OK button to enter sub-menu.
5. Aspect Ratio
Press Up / Down button to select Aspect
Ratio, then press OK button to enter sub-menu.Press Up / Down button to select
aspect ratio.(Available options are:Auto,4:3,16:9,Zoom1,Zoom2. )
6. Blue Screen
Press Up / Down button to select Blue
Screen, then press OK button to select
On or Off.
7. First Time Installation (not available in PC)
Press Up / Down button to select First Time
Installation, then press OK button to set relevant options including OSD language, country and tuning.
8. Reset
Press Up / Down button to select Reset , then press OK button to open a dialogue.Press Left button selecting
Yes to restore factory default by choosing
OSD language,country and conducting
Channel Tuning .
9. Software Update(USB)
Press Up / Down button to select Software
Update(USB), then press OK button to update software by using USB.
E 25
AV/SCART/HDMI/Component/Media
LOCK,the SETUP menu
PICTURE MODE
Move Return
Picture mode Standard
Contrast 50
Brightnes
Colour 50
0
Tint 50
Sharpness 30
Colour Temp Normal
Noise Reduction Middle
Select Exit
This can only be adjusted in the PERSONAL mode.
TINT
E 26
Move Return
Picture mode Standard
Contrast 50
Brightnes
Colour 50
0
Tint 50
Sharpness 30
Colour Temp Normal
Noise Reduction Middle
COLOR TEMPERATURE
Select Exit
Move Return
Sound Mode Standard
Treble 50
Bass 50
Balance 0
Auto Volume Off
SPDIF Mode Off
AD Switch Off
Select Exit
Auto Volume
Press UP / Down button to select Auto
Volume, then press OK button to select On or Off.
6. SPDIF MODE
Press UP / Down button to select SPDIF
MODE, then press OK button to
select Auto\ PCM\Off .
7. AD Switch (not available in AV)
Press UP / Down buttonto select AD
Switch.then press OK button to select On or Off.
E 27
1.
Move Return
Sleep Timer
Auto Standby
OSD Timer
Off
Off
5 S
Select Exit
2. Auto Standby
Press Up / Down button to select Auto
Standby, then press OK button to enter sub-menu. Press Up / Down / Left
/Right button to select.
3.
LOCK
Move
LOCK
Return
Block
Lock System
Set Password
Off
Block Program
Parental Guidance Off
Key Lock Off
Select Exit
1.
Lock System
Press Up / Down button to select Lock
System, then press OK button to make the following 3 options valid.
(Default password is ‘0000’.)
2. Set Password
Press Up / Down button to select Set
Password, then press OK button to enter sub-menu to set new password.
3. Block Program (not available in AV)
Press Up / Down button to select Block
Program, then press OK button to enter sub-menu.
Press Up / Down button to select the program you want to lock, then press yellow button on your remote control.
(To unlock program,enter the password you set.)
Press OK button to save setting and menu button to go back to the previous menu.
4. Parental Guidance (not available in AV)
Press Up / Down button to select
Parental Guidance, then press OK button to enter sub-menu to select.
(Available options are:Off, 4-18)
5. Key Lock
Press Up / Down button to select Key
Lock, then press Left / Right button to select “On” or “Off”, The key board will invalid if you set Key Lock “On”.
E 28
SETUP
SETUP
OSD
OSD
SETUP
Move
Deutsch
Return
OSD Language English
TT Language West
Hearing Impaired Off
PVR File System
Aspect Ratio
Blue Screen
First Time Installation
Reset
Software Update(USB)
16:9
Off
Select Exit
Please select an OSD Language
English Espanol Francais
Portugues
OK
Nederlands
ENGLISH.
DUTCH,
PORTUGUESE,
2. TT Language
Press Up / Down button to select TT then press OK button to enter sub-menu.Press Up / Down / Left / Right button to select.
3. Hearing Impaired (not available in AV)
Press Up / Down button to select Hearing
Impaired, then press OK button to select On or Off.
4. PVR File System (not available in AV)
Press Up / Down button to select PVR File
System, then press OK button to enter sub-menu.
5. Aspect Ratio
Press Up / Down button to select Aspect
Ratio, then press OK button to enter sub-menu.Press Up / Down button to select
aspect ratio.(Available options are:Auto,4:3,16:9,Zoom1,Zoom2. )
6. Blue Screen
Press Up / Down button to select Blue
Screen, then press OK button to select
On or Off.
7. First Time Installation (not available in AV)
Press Up / Down button to select First Time
Installation, then press OK button to set relevant options including OSD language, country and tuning.
8. Reset
Press Up / Down button to select Reset , then press OK button to open a dialogue.Press Left button selecting
Yes to restore factory default by choosing
OSD language,country and conducting
Channel Tuning .
9. Software Update(USB)
Press Up / Down button to select Software
Update(USB), then press OK button to update software by using USB.
E 29
LOCK
ATV
SETUP.
CHANNEL the CHANNEL TIME
CHANNEL
CHANNEL
Move Return
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Program Edit
Select
1 C-03
2 C-04
3 C-045
Program Edit
ATV
ATV
ATV
D elete
OK
Rename
Fav
Move Skip
Menu
Exit
1. Auto Tuning
Press Up / Down button to select
Auto Tuning, then press OK button to start auto search.
2. DTV Manual Tuning
Press Up / Down button to select
DTV Manual Tuning, then press
OK button to enter password to enter sub-menu.
(Default password is ‘0000’)
3. ATV Manual Tuning
Press Up / Down button to select
ATV Manual Tuning, then press
OK button to enter password to enter sub-menu.
(Default password is ‘0000’)
4. Program Edit
Press Up / Down button to select
Program Edit, then press OK button to enter sub-menu.)
This option has five functions.
Use Red button to Delete the current channel.
Use Green button to Rename the current channel.
Use Yellow button to Move the current channel.
Use Blue button to Skip the current channel.
·Use FAV button set the current channel to your favorite channel. if the current channel already is one of your favorite channel, press FAV button again to set it to a normal channel.
E 30
PICTURE MODE
Standard;Mild;Personal)
(Dynamic;
This can only be adjusted in the PERSONAL mode.
Move Return
Picture mode Standard
Contrast 50
Brightnes
Colour 50
0
Tint 50
Sharpness 30
Colour Temp Normal
Noise Reduction Middle
This can only be adjusted in the PERSONAL mode.
Select Exit
TINT
E 31
Move
Colour temperature
Return
Picture mode Standard
Contrast 50
Brightnes
Colour 50
0
Tint 50
Sharpness 30
Colour Temp Normal
Noise Reduction Middle
COLOUR TEMPERATURE
Select Exit
Move Return
Sound Mode Standard
Treble 50
Bass 50
Balance 0
Auto Volume Off
SPDIF Mode Off
AD Switch Off
Select Exit
Auto Volume
Press UP / Down button to select Auto
Volume, then press OK button to select On or Off.
6. SPDIF MODE
Press UP / Down button to select SPDIF
MODE, then press OK button to
select Auto\ PCM\Off .
7. AD Switch (not available in ATV)
Press UP / Down button to select AD
Switch.then press OK button to select On or Off.
E 32
1.
Move Return
Sleep Timer
Auto Standby
OSD Timer
Off
Off
5 S
Select Exit
2. Auto Standby
Press Up / Down button to select Auto
Standby, then press OK button to enter sub-menu. Press Up / Down / Left
/Right button to select.
3.
LOCK
Move
LOCK
Return
Block
Lock System
Set Password
Off
Block Program
Parental Guidance Off
Key Lock Off
Select Exit
1.
Lock System
Press Up / Down button to select Lock
System, then press OK button to make the following 3 options valid.
(Default password is ‘0000’.)
2. Set Password
Press Up / Down button to select Set
Password, then press OK button to enter sub-menu to set new password.
3. Block Program
Press Up / Down button to select Block
Program, then press OK button to enter sub-menu.
Press Up / Down button to select the program you want to lock, then press yellow button on your remote control.
(To unlock program,enter the password you set.)
Press OK button to save setting and menu button to back to the previous
4. Parental Guidance (not available in ATV)
Press Up / Down button to select
Parental Guidance, then press OK button to enter sub-menu to select.
(Available options are:Off, 4-18)
5. Key Lock
Press Up / Down button to select Key
Lock, then press Left / Right button to select “On” or “Off”, The key board will invalid if you set Key Lock “On”.
E 33
SETUP
SETUP
OSD
OSD
DUTCH,
PORTUGUESE,
SETUP
Move
Deutsch
Return
OSD Language English
TT Language West
Hearing Impaired
PVR File System
Off
Aspect Ratio
Blue Screen
First Time Installation
Reset
Software Update(USB)
16:9
Off
Please select an OSD Language
English Espanol Francais
Portugues
OK
Select Exit
Nederlands
2. TT Language
Press Up / Down button to select TT then press OK button to enter sub-menu.Press Up / Down / Left / Right button to select.
3. Hearing Impaired
Press Up / Down button to select Hearing
Impaired, then press OK button to select On or Off.
4. PVR File System
Press Up / Down button to select PVR File
System, then press OK button to enter sub-menu.
5. Aspect Ratio
Press Up / Down button to select Aspect
Ratio, then press OK button to enter sub-menu.Press Up / Down button to select
aspect ratio.(Available options are:Auto,4:3,16:9,Zoom1,Zoom2. )
6. Blue Screen
Press Up / Down button to select Blue
Screen, then press OK button to select
On or Off.
7. First Time Installation
Press Up / Down button to select First Time
Installation, then press OK button to set relevant options including OSD language, country and tuning.
8. Reset
Press Up / Down button to select Reset , then press OK button to open a dialogue.Press Left button selecting
Yes to restore factory default by choosing
OSD language,country and conducting
Channel Tuning .
9. Software Update(USB)
Press Up / Down button to select Software
Update(USB), then press OK button to update software by using USB.
E 34
DTV
CHANNEL
CHANNEL, LOCK
CHANNEL
CHANNEL
Move
Bad
Return
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
Signal Information
CI Information
Select
DTV Manual Tuning
- UHF CH 12 +
No Signal
Freq: 226.25Mhz
Menu
Good xi
ATV Manual Tuning
Current CH 45
Color System Auto
Sound System BG
Fine-Tune 55.25
AFC On
Search t
Exit
1. Auto Tuning
Press Up / Down button to select
Auto Tuning, then press OK button to start auto search.
2. DTV Manual Tuning
Press Up / Down button to select
DTV Manual Tuning, then press
OK button to enter password to enter sub-menu.
(Default password is ‘0000’)
Press Left / Right button to select channel, then press OK button to search program.
3. ATV Manual Tuning
Press Up / Down button to select
ATV Manual Tuning, then press
OK button to enter password to enter sub-menu.
(Default password is ‘0000’)
Press Left / Right button to select channel number you want to store.
Press Up / Down button to select the second option. Press
Left / Right button to select audio system.
Press Up / Down button to select search, then press OK button to start tuning.
4. Program Edit
Press Up / Down button to select
Program Edit, then press OK button to enter sub-menu.)
E 35
CHANNEL
--
--
--
--
--
--
--
CHANNEL
Program Edit
1 7 Digital
2 7 HD Digital
3 7 Digital 1
4 7 Digital 2
5 7 Digital 3
6 AFD0, 16:9
7 AFD0, 4:3
8 AFD1, 16:9
9 AFD1, 4:3
10 AFD2, 16:9
D e l e t e
OK Fav
S
Menu ik p
L
This option has two functions.
·Use Blue button to skip the current channel.
·Use FAV button set the current channel to your favorite channel. If the current channel already is one of your favorite channels, press FAV button again to set it to a normal channel.
5. Signal Information
Press Up /Down button to select Signal
Information, then press OK button to display signal details, including Channel Number, Frequency,
Quality and Strength.
6. CI Information
Press Up /Down button to select CI
Information, then press OK button to display details if you have inserted the
CI card.
CI Information
E 36
PICTURE MODE
Standard;Mild;Personal)
(Dynamic;
This can only be adjusted in the PERSONAL mode.
Move Return
Picture mode Standard
Contrast 50
Brightnes
Colour 50
0
Tint 50
Sharpness 30
Colour Temp Normal
Noise Reduction Middle
This can only be adjusted in the PERSONAL mode.
Select Exit
TINT
E 37
Move Return
Picture mode Standard
Contrast 50
Brightnes
Colour 50
0
Tint 50
Sharpness 30
Colour Temp Normal
Noise Reduction Middle
COLOR TEMPERATURE
Select Exit
Move Return
Sound Mode Standard
Treble 50
Bass 50
Balance 0
Auto Volume Off
SPDIF Mode Off
AD Switch Off
Select Exit
Auto Volume
Press UP / Down button to select Auto
Volume, then press OK button to select On or Off.
6. SPDIF MODE
Press UP / Down button to select SPDIF
MODE, then press OK button to
select Auto\ PCM\Off .
6. AD Switch
Press UP / Down button to select AD
Switch .then press OK button to select
ON or OFF.
E 38
LOCK
Move Return
Clock
Time Zone
Sleep Timer
Auto Standby
OSD Timer
01/Jan 01:39
GMT
Off
Off
5 S
1. Clock
Display the current system time.It’s not available.
2. Time Zone
Press Up / Down button to select Time
Zone, then press OK button to enter sub-menu.Press Up / Down / Left /Right button to select time zone.
3.
Select Exit
4. Auto Standby
Press Up / Down button to select Auto
Standby, then press OK button to enter sub-menu. Press Up / Down / Left
/Right button to select.
5.
Move
LOCK
Return
Block
Lock System
Set Password
Off
Block Program
Parental Guidance Off
Key Lock Off
Select Exit
1.
Lock System
Press Up / Down button to select Lock
System, then press OK button to make the following 3 options valid.
(Default password is ‘0000’.)
2. Set Password
Press Up / Down button to select Set
Password, then press OK button to enter sub-menu to set new password.
3. Block Program
Press Up / Down button to select Block
Program, then press OK button to enter sub-menu.
Press Up / Down button to select the program you want to lock, then press yellow button on your remote control.
(To unlock program,enter the password you set.)
Press OK button to save setting and menu button to back to the previous menu.
4. Parental Guidance
Press Up / Down button to select
Parental Guidance, then press OK button to enter sub-menu to select.
(Available options are:Off, 4-18)
5. Key Lock
Press Up / Down button to select Key
Lock, then press Left / Right button to select “On” or “Off”, The key board will invalid if you set Key Lock “On”.
E 39
SETUP
SETUP
OSD
OSD
SETUP
Move Return
OSD Language English
TT Language West
Hearing Impaired Off
PVR File System
Aspect Ratio 16:9
Off Blue Screen
First Time Installation
Reset
Software Update(USB)
Select Exit
Please select an OSD Language
English Espanol Francais
Deutsch Nederlands Portugues
OK
DUTCH,
PORTUGUESE,
ENGLISH.
2. TT Language
Press Up / Down button to select TT then press OK button to enter sub-menu.Press Up / Down / Left / Right button to select.
3. Hearing Impaired
Press Up / Down button to select Hearing
Impaired, then press OK button to select On or Off.
4. PVR File System
Press Up / Down button to select PVR File
System, then press OK button to enter sub-menu.
5. Aspect Ratio
Press Up / Down button to select Aspect
Ratio, then press OK button to enter sub-menu.Press Up / Down button to select
aspect ratio.(Available options are:Auto,4:3,16:9,Zoom1,Zoom2. )
6. Blue Screen
Press Up / Down button to select Blue
Screen, then press OK button to select
On or Off.
7. First Time Installation
Press Up / Down button to select First Time
Installation, then press OK button to set relevant options including OSD language, country and tuning.
8. Reset
Press Up / Down button to select Reset , then press OK button to open a dialogue.Press Left button selecting
Yes to restore factory default by choosing
OSD language,country and conducting
Channel Tuning .
9. Software Update(USB)
Press Up / Down button to select Software
Update(USB), then press OK button to update software by using USB.
E 40
13- Product specifications
Features
Items Relevant illustrations
LED 48 LED
Resolution 1366* 768 (best resolution 1366 * 768)
PAL B/G - AUTO - SECAM L
Input interface
Headphone Output
X 2
Rated power consumption
Accessories
Audio(1)
Audio(2)
Left,right audio input interface
Left,right audio input interface
High Quality Audio/Video input socket for connecting an external device fitted with an HDMI output
2 x 5 W
Portuguese
33 W
E 41
E 42
E the rear of the TV. When inserting the Disc incorrectly, you may damage the DVD
Press OK or play button to star from the highlighted content.
E 43
E 44
OK
OK
E 45
E 46
D.DISP
D.DISP
E 47
8. Audio
D.DISP
E 48
9. Language
10. Subtitle
11. Mute
E 49
12.Repeat A-B
13.Volume
E 50
Press numeric buttons to select the contents directly.For number over 10,press 10+ button first.(e.g. File number 15,press 10+ then 5.)
E 51
E 52
4
Press button to move and highlight between different sub-menu.Press
OK
OK
E 53
SCREEN SAVER
Select the screen saver on or off.
E 54
OK
E 55
OK
GERMAN
SPANISH
FRENCH
PORTUGUESE
DUTCH
OK
The default language setting is DUTCH.
OK
PORTUGUESE
E 56
ENGLISH
GERMAN
SPANISH
FRENCH
PORTUGUESE
DUTCH
OK
The default language setting is DUTCH.
GERMAN
GERMAN
SPANISH
FRENCH
PORTUGUESE
DUTCH
OK
The default language setting is DUTCH.
E 57
OK
OK
GERMAN
SPANISH
FRENCH
PORTUGUESE
DUTCH
OK
The default language setting is DUTCH.
OK
E 58
E 59
Base Assembly and Wall Mount instructions
1.Attaching the TV Stand
To attach the stand, place the stand on the nect of the TV,insert and tighten the 3 screws with the screwdriver.
2. Wall Mount instructions
E 60
Remove the stand by taking out the 4 screws
Instructions on environment protection
Do not dispose of this product in the usual household garbage at the
end of its life cycle; hand it over at a collection point for the recycling
of electrical and electronic appliances. The symbol on the product,
the instructions for use or the packing will inform about methods for
disposal.
The materials are recyclable as mentioned in its marking. By recycling, material recycling or other forms of re-utilization of old appliances, you are making an important contribution to protect our environment.
Please inquire at the community administration for the authorized disposal location.
E 61
advertisement