s

Data Sheet 

Fire Safety & Security Products 

MXL / MXLV

Peripheral Interface Module

Model P I M-1

•

ARCHITECT AND ENGINEER SPECIFICATIONS

Interface to remote printers

• RS-232C communication

• Terminal-block connector

• Bi-directional

• UL 864 9th Edition Listed, ULC Listed;

FM, CSFM, NYC Fire Dept. and City of Chicago Approved

Product Overview

The Peripheral Interface Module (Model PIM-

1) from Siemens Industry, Inc.

─

Fire Safety is a MXL-option module that provides an isolated

RS-232C port for connection to peripheral devices (e.g.

─ serial printers).

Mounting Data

Model PIM-1 mounts on four (4) standoffs in the MXL enclosure; connects to Model MMB-1 or Model MMB-2, and provides a screwterminal block for field wiring.

Specifications

Connection between the Siemens Industry,

Inc . ─ Fire Safety MXL system and remote peripheral devices (i.e.

─ printers) shall be provided by Model PIM-1. Model PIM-1 shall mount in the MXL enclosure, and shall provide a standard screw-terminal block for field wiring.

The interface shall be RS-232C and provide ground isolation between the MXL panel and the peripheral devices.

Electrical Ratings

RS-232C

Voltage:

Input Voltage:

Cable Length:

±12VDC

±5mA

25 ft., max.

Temperature and Humidity Range

Model NET-4 is UL 864 9 th Edition Listed for indoor dry locations within a temperature range of 120+/-3°F (49+/-2°C) to 32+/-3°F

(0+/-2°C) and a relative humidity of 93+/-2% at a temperature of 90+/-3°F (32+/-2°C).

Peripheral Interface Module

5015 s Industry, Inc.

Building Technologies Division

Installation and Operation Manual

[IOM]

Model

Number

Part

Number

Description

PIM-1 315-091462 Peripheral Module

Note: For further details, refer to MXL IOM manual: 315-092036.

 

Related Documentation

Product Data Sheet Number

MXL 5000

Model

Number

PIM-1

Details for Ordering

Part

Number

Description

Wiring Diagram

CAUTION: The above table refers to whether or not the wiring connections are supervised.

The above table does not refer to the type of printer used in the panel.

SHIELD:

COMMON:

- - -, BUSY:

CONNECT TO CABLE SHIELD

CONNECT TO PRINTER, PIN 7 (DB-25 CONNECTOR)

CONNECT TO PRINTER, PIN 11 or 20 (DB-25); SEE: NOTE 2

- - -, RECEIVE: CONNECT TO PRINTER, PIN 2 (DB-25 CONNECTOR)

- - -, TRANSMIT: CONNECT TO PRINTER, PIN 3 (DB-25 CONNECTOR)

RESERVED FOR FUTURE USE

CONNECT TO PRINTER, PINS 4 AND 5 (DB-25 CONNECTOR)

CONNECT TO PRINTER, PINS 6 AND 8 (DB-25 CONNECTOR); SEE: NOTE 1

CONNECT TO PRINTER, PIN 20 (DB-25 CONNECTOR); SEE: NOTE 1

Notes:

1.) Terminals TB1-8 and 9 are internally connected on Model PIM-1.

2.) The busy signal from the printer prevents the loss of characters if the printer falls behind.

Refer to the printer manual for the proper pin [usually 11 (TB-1-3) or 20 (TB1-9)].

Notice:

This marketing data sheet is not intended to be used for system design or installation purposes.

For the most up-to-date information, refer to each product’s installation instructions.

s Industry, Inc.

Building Technologies Division

Fire Safety

8 Fernwood Road

Florham Park, NJ 07932

Tel: (973) 593-2600

FAX: (908) 547-6877

URL: www.SBT.Siemens.com/FIS

(SII‐FS)

Printed in U.S.A.

 

Fire Safety

2 Kenview Boulevard

Brampton, Ontario

L6T 5E4 / Canada

Tel: (905) 799-9937

FAX: (905) 799-9858

February 2011

Supersedes sheet dated 6/03

(Rev.1)