- Industrial & lab equipment
- Electrical equipment & supplies
- Power conditioning
- Power adapters & inverters
- User manual
advertisement
“QUICK LOCK ™ ” 25 W att Single and Dual Output,
Chassis Mountable AC/DC Switching Power Supply
FEATURES
CHASSIS MOUNTABLE
“NEW” QUICK LOCK ™ TERMINAL BLOCK
SUPER SMALL SIZE
HIGH POWER DENSITY
UNIVERSAL INPUT / “CE-MARK”
HIGH RELIABILITY
OVERCURRENT PROTECTION
TWO YEAR WARRANTY
FCC Part 15-B
EN 55022-B
All specifications are typical at nominal input, full load.
Input Voltage.............................................. AC 85V-264V
Input Frequency.......................................... 47-63 Hz
Input Current............................................... Vin= 115v 0.36A
Vin= 230v 0.26A
Inrush Current............................................. Vin= 100v 5A
Vin= 230v 14A
Output Voltage............................................ See Chart
Output Adjustment...................................... No Adjustment
Efficiency..................................................... 73~79%
Over-Voltage Protection.............................. N/A
Over-Current Protection.............................. Automatic Recovery (105% min)
Ripple and Noise......................................... 150 mVp-p max
Hold-Up Time.............................................. Vin= 100v 19mS
Vin= 230v 120mS
Line/Load Regulation.................................. 0.4%% / 1% (MAX)
Rise Time.................................................... Vin= 100v 140mS
Vin= 230v 120mS
Leakage Current......................................... Vin= 100v 0.15 m RMS
Vin= 230v 0.29 m RMS
Switching Frequency................................... 100 KHz Typ
MTBF.......................................................... >173,000 Hours Typ
Isolation Voltage
Primary to Secondary............... 3000 VAC
Primary to Case........................ 1500 VAC
Secondary to Case.................... 500 VAC
Isolation Resistance.................................... 100 M
Ω
N M N T
Operating Temperature .............................. 0˚C ~ +60˚C
Derates linearly 2.5%/˚C after 50˚C
Cooling........................................................ Convection
Temperature Coefficient.............................. 0.02% / ˚C
Humidity...................................................... 20-85% Rh
Storage Temperature.................................. -20° ~ +85˚C
Shock/Vibration........................................... Shock: 20G (3 Directions each 3 times)
Vibration: 1~55Hz
98
Quick lock connector
MODEL
KB25C-05S
KB25C-12S
KB25C-15S
KB25C-24S
KB25C-122D
KB25C-153D
INPUT RATING
115 V 50-60 HZ
230 V 50-60 HZ
115 V 50-60 HZ
230 V 50-60 HZ
115 V 50-60 HZ
230 V 50-60 HZ
115 V 50-60 HZ
230 V 50-60 HZ
115 V 50-60 HZ
230 V 50-60 HZ
115 V 50-60 HZ
230 V 50-60 HZ
OUTPUT VOLTAGE OUTPUT CURRENT
EFFICIENCY AT
100% LOAD(TYP.)
5 VDC
5 VDC
12 VDC
12 VDC
15 VDC
15 VDC
24 VDC
24 VDC
± 12 VDC
± 12 VDC
± 15 VDC
± 15 VDC
0.42 ~ 4.2 A
0.46 ~ 4.6 A
0.18 ~ 1.8 A
0.20 ~ 2.0 A
0.15 ~ 1.5 A
0.16 ~ 1.6 A
90 ~ 900 mA
100 ~ 1000 mA
±90 ~ 900 mA
±100 ~ 1000 mA
±75 ~ 750 mA
±80 ~ 800 mA
77%
78%
75%
77%
73%
75%
77%
79%
75%
78%
77%
78%
KB25C Series
NOTE:
All specifications typical and nominal / full load and 25˚C unless otherwise noted.
Avoid sustained operation in overload or dead short conditions.
Specifications subject to changes without notice.
99
• Dimensions in mm
• “Pin” type connector available
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project