QUICK USE GUIDE

12nc: 3139 246 14752

1

what’s in the box

2

MRV660

prepare remote control

3

1

2

(red/white/yellow)

3

connect DVD recorder

Cable or satellite signal Cable/satellite box jack panel

IN OUT

CH3 CH4

3a

Connect TV signal to ANTENNA IN of DVD recorder

3b Connect antenna cable to TV OUT of

DVD recorder

3c Connect the AV cables (yellow plug) from the DVD recorder’s VIDEO

(CVBS) (OUT 2) jack to the Video

In jack at the back of your TV set.

back of DVD recorder

3e

Connect to the power supply.

3d Connect the AV cables (red/white plugs) from the DVD recorder’s AUDIO L/R

(OUT 2) jack to the audio input jack at the back of your TV set.

4

start first installation

4a

Press STANDBY-ON 2 on the DVD recorder to turn it on.

➜

The message 'IS THE TV

ON?' appears on the display panel.

4c

{ Language and Country } will appear on the TV.

LANGUAGE AND COUNTRY

Select Language and Country

Language

Country

Menu

English

Spanish

French

{Language}

- select on-screen display.

{Country}

- select country of your residence.

4b

Turn on the TV power.

Select the correct Video

In channel at the TV.

➜

The first installation menu will appear on the TV.

Done

4d

{ TV Shape } menu will appear on the TV.

TV SHAPE

Select your TV shape

TV Shape

Done

4:3 Panscan

4:3 Letterbox

16:9

{ TV Shape }

- select TV screen display.

Use 3 4 on the DVD recorder’s remote control to select an item in the menu. Press 2 to access the selected item’s options and 1 to confirm your selection.

4e

{ Channel Search } menu will appear on the TV.

CHANNEL SEARCH

Automatic channel search will find and store all channels. Make sure to connect the antenna.

Search channels

Skip Search

Start

{ Channel Search }

- Press OK ro start automatic TV channel search.

4f

{ Time and Date } menu will appear on the TV.

TIME AND DATE

Please check the Date and if incorrect, navigate right to correct the Date.

Time

Date

Done

09:00 PM

06.30.2004

OK

{ Time and Date }

Press 2 to enter correct time and date. Use 34 keys to change the digit and press 2 to go to next digit. Press OK to confirm

When you complete, select { Done } in the menu and press OK on the remote control.

The DVD recorder is ready for use!

5

start manual recording

6

start playback

3 4

5a

Insert a recordable DVD+R(W) with the label facing up.

5b

Press TUNER on the remote control to see the list of TV programs, then use 3 4 keys to select the program number you wish to record.

➜

If you wish to record from an additional device (e.g.

Video Cassette Recorder,) press 3 4 keys repeatedly to select the corresponding external input channel. For example, select { EXT2 } if you have connected the VCR to IN-EXT2 jack at the back of the DVD recorder.

5c

Press REC MODE to select a desired recording mode.

It defines the picture quality and the maximum recording time for a disc.

5d

Press RECORD 0 to start recording.

➜

If required, you can press RECORD 0 twice to start a 30-minute recording. Each time you press

RECORD 0 button, you will add 30 minutes to the recording time.

5e

To stop the recording, press STOP 9.

➜

Wait until the message disappears from the display panel before you remove the disc.

To playback a disc

6a

Insert a disc with the label side facing up.

6b

Playback will start automatically.

➜

If a dialog appears on the TV showing { Do you want to access the disc content?}, press 3 4 keys to select

{Yes} to show the disc content or {No} to return to the last active mode, then press OK to confirm.

➜

If a disc menu appears, use 1 2 3 4 keys to navigate within the menu, highlight a title and press OK or

PLAY 2 to start playback.

6c

To stop playback, press STOP 9.

To watch the TV programs

6d

Press TUNER on the remote control, then use 3 4 keys to select the program number.

To play a DVD+R on other DVD players, you must finalize it first

6e

Press EDIT on the remote control.

6f

Use 3 4 keys to select { Finalize Disc } in the menu, then press OK to start finalizing the DVD+R.

Once a DVD+R is finalized, no further recording or editing is possible. Unfinalizing a DVD+R is not possible.

GET PICTURE

•

Check the AV mode on TV. It may be called FRONT, A/V IN, or

VIDEO. Choose the different modes using TV remote control.

•

Or, select CHANNEL 3 or 4 on the TV if you are using a

RF modulator or Cable/Satellite Box.

GET SOUND

•

Connect the AUDIO L/R (red/white) jacks at the back of the

DVD recorder to the corresponding AUDIO input jacks on a TV, stereo system or receiver. Turn on the connected system and select the appropriate channel.

NEED HELP? Visit our website www.usasupport.magnavox.com