Olympus Stylus Zoom Camera User manual
広告
広告
INSTRUCTIONS
Before using your Stylus Zoom, read this manual carefully to ensure correct use.
We recommend that you take test shots to get accustomed to your Stylus Zoom before taking important photographs.
Thank you for purchasing the Olympus Stylus Zoom.
Please read this instruction manual carefully before using the camera.
MAIN FEATURES
Built-in 35 mm—70 mm 2X zoom lens.
Weatherproof.
Remote control (optional).
Symbols used in this manual:
2
Incorrect
Operation sound
Manual operation
Indicator on
Next operation
Indicator blinking
Operation order
Attention
Automatic operation
Depress halfway
PREPARATIONS
BASIC
OPERATIONS
ADVANCED
TECHNIQUES
CAMERA
MAINTENANCE
Names and functions of parts ......... 4
Viewfinder ....................................... 6
LCD panel ....................................... 7
Attaching the strap .......................... 8
Using the soft case (optional) ......... 9
Loading the film............................... 18
Taking pictures................................ 20
Using the flash modes .................... 30
Auto (Auto Flash) ............................ 32
Auto-S (Red-Eye Reducing Flash) .... 33
OFF (Flash Override) ...................... 34
FILL-IN (Forced Activation) ............. 35
Caring for your weatherproof camera ... 42
Care and storage ............................ 44
Remote control RC-100 handling .... 45
Battery handling .............................. 45
Outline of operations....................... 10
Loading the battery ......................... 14
Checking the battery....................... 15
Points to remember......................... 16
Using the focus lock........................ 25
After shooting .................................. 27
Unloading the film ........................... 29
Night Scene .................................... 36
Selftimer..........................................37
Remote control (optional) ................ 38
Spot................................................. 40
Questions and answers .................. 46
Troubleshooting .............................. 47
Specifications.................................. 50
3
4
NAMES AND FUNCTIONS OF PARTS
Flash mode button (p. 30) Zoom lever (p. 21)
Zooms in—telephoto.
Zooms out—wide-angle.
Shutter release button
(p. 17)
Selftimer indicator
Strap eyelet
Selftimer/remote control button
(p. 37/38)
Flash
LCD panel
Displays the camera's mode and operation conditions.
(p. 7)
Viewfinder
Light sensor
Lens barrier Autofocus windows
Lens
Back cover
Viewfinder
(P. 6)
Back cover release
Orange lamp
Mid-roll rewind button (p. 29)
Green lamp
Film window
Battery compartment cover
Tripod socket
5
Close-up correction marks
At a close distance, your subject must be positioned within the close-up correction marks.
VIEWFINDER
6
Autofocus mark
Position your subject within the autofocus mark.
Orange lamp
When this lamp lights, the flash will fire when you press the shutter button all the way.
Green lamp
Lights when the subject is in focus.
Selftimer/remote control (p. 37/38)
Spot mode (p. 40)
Battery check (p. 15)
LCD PANEL
Flash modes (p. 31)
Exposure counter (p. 19)
7
8
ATTACHING THE STRAP
USING THE SOFT CASE (Optional)
9
10
OUTLINE OF OPERATIONS
Basic Shooting Procedures
1.
Load the battery
(p. 14).
2.
Open the back cover
(P. 18).
3.
Load the film aligning the film leader with the red mark (p. 19).
4.
Close the back cover.
The film automatically advances to the first frame (p. 19).
5.
Open the lens barrier until you hear a
"Click" (p. 19).
6.
Make sure the exposure counter on the LCD panel reads
(p. 19)
11
12
7.
Press the zoom lever for telephoto or wideangle photography
(p. 21).
8.
Place the autofocus mark on the main subject (p. 22).
9.
Depress the shutter release button halfway to make sure the green lamp lights
(p. 22).
10.
Depress the shutter release button fully to take a picture
(p. 22).
11.
When the film reaches the end, it will automatically rewind (p. 29).
12.
Open the back cover to remove the rewound film (p. 29).
13
LOADING THE BATTERY
1.
Close the lens barrier. Gently use a coin to open the battery compartment cover.
2.
Insert the new battery correctly as indicated below and close the battery compartment cover tightly.
14
Read "Battery Handling" on page 45. Do not twist the coin.
Use a 3 V lithium battery
(Duracell DL123A,
Panasonic CR123A, or equivalent.)
CHECKING THE BATTERY
1.
Open the lens barrier as shown below until you hear a "Click" and check the battery power remaining.
Batteries are OK. The mark disappears after 12 sec.
Batteries are low.
Have spares handy.
Batteries should be replaced immediately.
Note: Keep a spare battery on hand when going on a long trip or to a cold area.
15
POINTS TO REMEMBER
Hold the Camera Correctly.
16
Correct.
Hold the camera firmly with both hands.
Correct.
In the vertical position, hold the camera with its flash positioned at the top.
Incorrect.
Caution:
Keep your fingers and strap away from the lens, flash, autofocus windows and light sensor.
Proper Shutter Release Practice before loading the film.
1.
Depress the shutter release button halfway.
2.
Depress the shutter release button fully.
To lock the focus.
Make sure
The green lamp lights in the viewfinder.
To release the shutter and take the picture.
Cautions:
Press the shutter release button gently.
Avoid shaking the camera when pressing the shutter release button to prevent blurry pictures.
17
LOADING THE FILM
1.
Slide the back cover release upwards to open the back cover.
2.
Insert the film cartridge, making sure the film is lying flat.
18
Make sure If there is dust or dirt on the lens, remove it with a blower brush.
Make sure the film is correctly positioned between the guide rails.
Correct
Incorrect
3.
Align the film leader with the red mark, and close the back cover.
4.
Open the lens barrier until you hear a
"Click".
The film automatically advances to the first frame.
Make sure The exposure counter on the LCD panel reads
Note:
If E blinks in the exposure counter, as shown on the left, the film is improperly loaded. Reload the film.
19
1.
Open the lens barrier until you hear a "Click".
TAKING PICTURES
If the lens barrier is opened while the flash is held down, the lens extends slightly then retracts. THE CAMERA WILL
NOT OPERATE.
20
Make sure
The lens extends slightly, the flash pops up, and the LCD panel activates.
Release the flash, and reopen the lens barrier or operate the zoom lever to reactivate the camera.
2.
Aim the camera at your subject. Use the zoom lever for telephoto or wide angle photography.
How to Use the Zoom Lever.
Telephoto:
Push the lever to the to zoom in.
side
Wide-angle:
Push the lever to the to zoom out.
side
Maximum telephoto focal length: 70 mm
Maximum wide-angle focal length: 35 mm
21
3.
Position your subject within the autofocus mark.
4.
Depress the shutter release button halfway.
5.
Depress the shutter release button fully to take the picture.
22
Autofocus mark Make sure
The green lamp lights.
The film automatically advances to the next frame.
With the composition shown on the right, the background will be in focus but the subjects in the foreground may not.
This is because the autofocus mark does not cover the one of the subjects. In this case, use the focus lock to keep the subjects in focus. (Refer to page 25.)
23
24
Working Distance
The focus range of the camera is 0.6 m (2 ft.) to
(infinity).
When the subject is closer than 0.6m (2 ft.), the shutter will not release.
(The green lamp blinks.)
When the subject is extremely close to the camera, the subject will be out of focus although the shutter releases.
Close-Up Correction
Picture frame Close-up correction marks
Image area of picture at 0.6 m (2 ft.)
The viewfinder's picture frame is the area that can be shot of subjects at (infinity).
However, the picture area will move lower in the viewfinder as you get closer to the subject. At 0.6 m (2 ft.), the shaded area is the actual available image area. In this case, the subject should be positioned below the close-up correction marks.
USING THE FOCUS LOCK
To Avoid Taking Out-of-focus Pictures
When the main subject is not within the autofocus mark, use the focus lock.
1.
Position the autofocus mark on your subject and press the shutter release button halfway.
The autofocus mark must be positioned on the subject in order to focus on it. In the left case, the camera will focus on the tree in the background and the subjects will be out of focus.
Autofocus mark
25
26
Make sure
The green lamp lights.
When the focus is locked, the exposure is also locked (AE lock).
2.
Reposition your subjects in the picture frame while keeping the shutter release button depressed halfway. Then press the shutter release button fully.
1.
Close the lens barrier slowly and carefully.
AFTER SHOOTING
The lens and flash will retract automatically.
2.
Close the lens barrier completely.
Caution:
Do not force lens barrier closed as it will interfere with lens retraction.
The display goes out and the camera can be put in its case.
27
28
The lens can also be retracted by pushing down the flash.
Note:
When the camera is not in use, close the lens barrier to prevent the shutter from firing accidentally and to protect the lens.
UNLOADING THE FILM
The camera automatically rewinds the film when you reach the end of a roll.
Rewinding the film before the end of the roll
After the motor stops and starts blinking on the LCD panel, open the back cover and remove the film.
The final number of exposures may sometimes exceed the number of exposures specified on the film.
Press the mid-roll rewind button gently with your nail.
Do not use an instrument with a sharp tip.
29
30
USING THE FLASH MODES
This camera has five flash modes. Select the flash mode according to your shooting conditions and needs.
How to change the flash mode
Press the button, the flash mode will change in the order shown on the right.
Mode Function
Automatically fires in low-light and backlight conditions. (p. 32)
Can significantly reduce the phenomenon of redeye (when a subject's eyes appear red). (p. 33)
The flash does not fire. (p. 34)
Fires regardless of available light. (p. 35)
When you want to light the subject in the foreground with a night-scene in the background. (p. 36)
Notes:
All other modes except AUTO-
S mode will return to the AUTO mode when the lens barrier is closed. When the camera is set to the AUTO-S mode, it will return to AUTO-S when the lens barrier is closed and reopened.
In the AUTO, AUTO-S Flash, and modes, the flash strength is automatically controlled to prevent pictures from being overexposed even when the subjects are close.
31
32
AUTO (Auto Flash)
In the Auto Flash mode, the flash will fire automatically in low-light and backlight conditions.
Make sure
The orange lamp in the upper right of the viewfinder lights when the shutter release button is depressed halfway. This indicates the flash is fully charged.
Flash Working Range
ISO
100
200
400
Wide
(35 mm)
0.6—4.2 m
(2 ft.— 13.8 ft.)
0.6—5.9 m
(2 ft.— 19.4 ft.)
0.6—8.4 m
(2 ft.—27.6 ft.)
Tele
(70 mm)
0.6—2.8 m
(2 ft.— 9.2 ft.)
0.6—3.9 m
(2 ft.— 12.8 ft.)
0.6—5.6 m
(2 ft.— 18.4 ft.)
Notes:
• While the flash is still charging and the flash indicator (orange) is blinking, the shutter will not release. It takes about 4 seconds after the film is advanced to recharge the flash. (at normal temperature with a new battery)
• In some situations such as when the subject is too small, occasionally the flash may not fire automatically, even in backlight. (This is more likely to occur with telephoto.) If this occurs, use the FILL-IN mode.
AUTO-S (Red-Eye Reducing Flash)
Significantly reduces the phenomenon of "red-eye" (when a subject's eyes appear red).
In the Auto-S Flash mode, the camera will emit a series of low-power pre-flashss before the regular flash. This makes the subjects' pupils contract, significantly reducing red-eye. Except for the pre-flashes, this mode is the same as the Auto Flash mode.
Note:
Red-eye reduction may not be effective with some individuals or if:
1. The subject doesn't face the flash.
2. The subject is too far from the camera.
IMPORTANT: Be sure to hold the camera still until the shutter releases.
33
34
OFF (Flash Override)
When you don't want the flash to fire.
In the Flash-OFF mode, the flash does not fire even in low-light conditions. Use this mode in situations where flash photography is not desired or is prohibited.
Note:
Since a slow shutter speed (down to
4 seconds) is automatically selected in low-light situations, the use of a tripod is recommended to prevent blurred pictures caused by shaking the camera in this type of situation.
FILL-IN (Forced Activation)
When you want to fire the flash every shot.
In the FILL-IN Flash mode, the flash fires regardless of available light. This mode can be used to brighten up a subject's shaded face, for example.
35
NIGHT SCENE
When you want both the subject in the foreground and the night-scene in the background to be properly exposed.
Use the Night-Scene Flash mode to properly light the subject in the foreground while leaving the background naturally lit.
36
Note:
Since a slow shutter speed (down to 4 seconds) is automatically selected in low-light situations, the use of a tripod is recommended to prevent blurred pictures caused by shaking the camera.
SELFTIMER
To Put Yourself in the Picture
1. Press the
/REMOTE button.
is displayed on the LCD panel.
2. Aim at your subject, and press the shutter release button.
Make sure on the LCD panel will be displayed.
10 sec.
Selftimer indicator lights.
2 sec.
Blinks
The shutter will be released
12 seconds later.
Notes:
The focus and exposure will be locked when the shutter release button is depressed halfway.
After the shutter is released, the camera will return to the
Normal mode.
To cancel the selftimer after it has been activated, press
/REMOTE button again.
37
38
REMOTE CONTROL RC-100 (Optional)
1.
Press the
/REMOTE button.
is displayed on the LCD panel.
2.
Aim the remote control at the camera, and press the button. The shutter will be released after 3 seconds.
After shooting, press the
/REMOTE button again to cancel the selftimer/remote control mode.
Notes:
• Use the remote control within the range shown on the left.
• In backlit situations, remote control shooting may sometimes be impossible.
• The camera will focus on the subject directly in front of it.
• The remote control must be activated within 20 minutes of pressing the button. After 20 minutes the button must be re-set.
Read "Remote Control RC-100 Handling" on page 45.
39
1.
SPOT MODE
To Focus and Set the Exposure for the Main Subject or Selective Area
Press the /REMOTE button and flash mode button at the same time, is displayed on the
LCD panel.
2.
Position the autofocus mark on your subject, and press the shutter release button halfway.
Make sure
The green lamp lights.
The focus and exposure will be locked in the center of the autofocus mark.
40
Press the /REMOTE and flash mode button at the same time or close the lens barrier to cancel the spot mode.
3.
Reposition your subject in the picture frame while keeping the shutter release button depressed halfway. Then press the shutter release button fully.
The use of the Spot mode is recommended in the following cases.
When there is an object in front of the main subject.
When the subject is on the edge of the frame.
When the background is brighter than the subject (the subject is backlit).
41
CARING FOR YOUR WEATHERPROOF CAMERA
This camera is weatherproof, however it is not designed for underwater use. Please use the camera correctly.
42
This camera will be protected against
Splashing water...
and Rain Do not wash the camera.
Do not submerge the camera or attempt to take pictures underwater.
NOTES:
If the camera has been splashed by water, etc., clean the camera with a dry cloth as soon as possible.
Do not touch the rubber gasket on the battery compartment cover or the rubber gasket on the camera back with excessive force. Do not remove the gaskets.
Gaskets should be replaced after approximately three years, although they may require replacement earlier than that depending on use and wear.
If the gaskets are damaged or need replacement, contact your nearest Olympus service center.
Wipe any dust or sand off the rubber gasket of the back cover or the battery cover, then close it. Leaving dust or sand or the gasket may allow water in.
43
CARE AND STORAGE
44
CAUTIONS:
DO NOT EXPOSE THE CAMERA TO
EXTREME HEAT (OVER 40°C/104°F) OR
TO EXTREME COLD (BELOW -10°C/14°F).
DO NOT EXPOSE THE CAMERA TO THE COLD
WHEN IT'S WET, OR THE LENS COVER ETC. MAY
FREEZE, MAKING THE CAMERA INOPERABLE.
AVOID SUDDEN TEMPERATURE
CHANGES AND HUMIDITY.
DO NOT EXPOSE THE CAMERA TO
STRONG MAGNETIC FIELDS.
DO NOT APPLY EXCESSIVE FORCE TO
THE CAMERA OR ITS CONTROLS.
DO NOT TOUCH THE CONTACT POINTS
INSIDE THE CAMERA.
DO NOT USE ORGANIC SOLVENTS, THINNERS,
OR BENZINE TO CLEAN THE CAMERA.
AVOID STRONG IMPACT CAUSED BY
BUMPING OR DROPPING THE CAMERA.
DO NOT EXPOSE THE CAMERA TO
EXCESSIVE DUST AND SAND.
THE LENS BARREL IS FINISHED WITH A SPECIAL
COATING TO SMOOTH THE ZOOMING MOVEMENT.
NEVER WIPE IT WITH SOLVENTS LIKE THINNERS OR
BENZINE. WHEN IT IS HEAVILY STAINED, CLEAN IT
WITH A MOISTENED CLOTH AND THEN WIPE OFF
THE MOISTURE WITH A DRY CLOTH.
NEVER ATTEMPT TO DISASSEMBLE THE CAMERA;
IT CONTAINS A HIGH-VOLTAGE CIRCUIT.
In case of malfunction, consult your nearest
Olympus dealer or Olympus service center.
REMOTE CONTROL
RC-100 HANDLING
NOTE:
• The remote control unit is expendable. Order a new one from your nearby camera store or Olympus service center when it no longer transmits signals to the camera.
CAUTIONS:
• Keep the remote control out of the reach of children. In case it is swallowed, immediately consult a physician.
• Keep the remote control away from fire and extreme heat.
Never try to disassemble it.
BATTERY HANDLING
NOTES:
• Even when batteries are brand-new, their service life may be shorter than specified if an extended period of time has passed since they were produced.
• Sweat and oil can prevent a battery's terminals from making electrical contact.
To avoid this, wipe both terminals before loading battery.
• If you don't intend to use the camera for a long time, remove the battery.
WARNINGS
NEVER TRY TO DISASSEMBLE,
RECHARGE, OR SHORT
CIRCUIT BATTERIES. NEVER
EXPOSE BATTERIES TO
EXCESSIVE HEAT.
KEEP THE BATTERIES OUT OF
THE REACH OF CHILDREN. IF
A CHILD SWALLOWS A
BATTERY, CONTACT A
DOCTOR IMMEDIATELY.
USE A 3 V LITHIUM BATTERY
(CR123A OR DL123A). NEVER
TRY TO DISASSEMBLE OR
MODIFY ANY BATTERY OR
BATTERY PACK FOR USE IN
THIS CAMERA.
45
QUESTIONS AND ANSWERS
46
Q: How long will the battery last?
A: If you use 24-exposure rolls of film and use the flash on half of all your pictures, a new 3
V lithium battery (DL123A/CR123A) will last for 12 or more rolls of film. If you do not use the flash and zoom very often, the battery will last much longer.
Q: How should I clean the lens?
A: Wipe the lens gently with a soft, clean cloth that has been moistened with a small amount of lens cleaning fluid.
Q: Can I use film that is not DX-coded?
A: Yes, but only ISO 100 film.
Q: When does the camera measure and set the exposure?
A: When the shutter release button is depressed halfway, the camera measures both the exposure and focus and locks them as long as the shutter release button remains halfway depressed.
Q: Why did my camera make a loud noise and retract the lens right after I replaced the battery?
A: Because you replaced the battery while the lens barrier was open. Be sure to close it before replacing the battery.
Q: The flash gets hot.
A: If the flash is used continuously, it may become hot. If this happens, stop using the camera for a while.
Q: There's a click if I press the zoom lever after rolling up the film.
A: It's just the sound of the gears changing, and is quite normal.
TROUBLESHOOTING
OPERATING PROBLEMS
Symptom
The camera does not work.
The LCD goes off suddenly and the lens and flash retract.
Cause
The lens barrier is not opened.
The alignment of the battery terminals is not correct.
The batteries are exhausted.
The batteries are temporarily unable to function because of cold.
The loaded film has been rewound.
The film is incorrectly loaded.
If you don't use the camera, the LCD goes off and the lens and flash retract after twenty minutes.
The flash is retracted.
Remedy
Open the lens barrier completely.
Reload the battery correctly.
Replace the battery with new one.
Keep the camera warm while using it.
Load new film.
Reload the film.
Close the lens barrier and open it again or operate the zoom lever to turn the LCD back on. In addition, the power is turned OFF automatically after 4 hours. When the camera is not in use, close the lens barrier as much as possible.
Page
20
14
15
29
19
47
48
OPERATING PROBLEMS (cont.)
Symptom
The shutter doesn't release when the remote control's shutter release button is pressed.
The green lamp blinks, and the shutter will not release.
The orange lamp blinks, and the shutter will not release.
The flash does not fire, even in the dark.
Cause
The remote control hasn't been used in the 20 minutes since the Selftimer/
Remote Control mode was entered, causing the LCD panel to turn off.
The camera is closer than 0.6 m (2 ft.) to the subject.
The flash has not been recharged yet.
The flash mode is set to OFF.
High sensitive film is in use.
Remedy
Press the zoom lever. The LCD will light. Then press the /REMOTE button again.
Page
Move the camera farther than 0.6 m
(2 ft.) from the subject.
24
Remove your finger from the shutter release button and waIt for several seconds until the flash is recharged before shooting.
Set it to a mode other than OFF.
Set the flash mode to FILL-IN.
32
30/31
30/31
PROBLEMS WITH THE PRINTED PICTURES
Symptom Cause
The picture is out of focus.
The picture is too dark.
The camera moved when the shutter release button was pressed.
The subject was not within the viewfinder's autofocus mark.
The lens and autofocus windows were dirty.
The autofocus window was blocked, such as by a finger.
The subject was closer than the minimum working distance to the lens (0.6 m/2 ft.).
While using the self-timer, the shutter release button was pressed while standing right in front of the camera.
The flash was blocked, such as by a finger.
The color of a picture taken indoors is abnormal.
The subject was out of the working range of the flash.
The flash mode was set to OFF.
The subject was backlit.
The color of the room lighting affected the picture.
Remedy
Hold the camera correctly and press the shutter release button gently.
Position the subject in the center of the autofocus mark, or use the focus lock.
Clean the lens and autofocus windows.
Hold the camera correctly, keeping your fingers clear of the autofocus windows.
Shoot from more than 0.6 m (2 ft.) away from the subject.
Do not stand in front of the camera.
Press the shutter release button while looking through the viewfinder.
Hold the camera correctly, keeping your fingers clear of the flash.
Shoot within the flash working range.
Check the flash mode before shooting.
Set the flash mode to FILL-IN.
Set the flash to FILL-IN mode.
Page
16
22/25
16
24
37
16
32
30/31
30/31
30/31
49
SPECIFICATIONS
50
Type: Full automatic 35 mm autofocus lens-shutter camera with built-in 35—70 mm zoom lens.
Film format: 35 mm standard DX-coded film (24 x 36 mm)
Lens: Olympus lens 35—70 mm F4.5—6.9, 6 elements in 5 groups.
Shutter: Programmed electronic shutter.
Viewfinder: Real image zoom viewfinder (with autofocus mark, close-up correction marks, autofocus indicator and flash indicator).
Focusing: Active-type autofocus system. Focus lock possible. Focusing range: 0.6 m (2 ft.)— (infinity).
Exposure control: Programmed automatic exposure control, 2-zone light metering, switchable to spot metering. Auto exposure range: Wide-angle—EV2.3 (F4.5, 4 sec.) to EV16 (F11, 1/500 sec.), Telephoto—EV3.6 (F6.9, 4 sec.) to
EV17.2(F17, 1/500 sec.).
Exposure counter: Progressive type with automatic reset, displayed on LCD panel.
Selftimer: Electronic selftimer 12-sec. delay.
Remote control (optional): Infrared remote control unit with 3-sec. delay.
Film speed range: Automatic setting with DX-coded film with ISO 50, 100, 200, 400, 800, 1600, 3200.
For film with less than ISO 50, film speed is set to ISO 100.
Film loading: Automatic loading. (Automatically advances to first frame when camera back is closed).
Film advance: Automatic film winding.
Film rewind: Automatic film rewind (automatic rewind activation at end of film, automatic rewind stop). Rewind possible at any point with rewind button.
Flash: Built-in flash. Recycling time: Approx. 0.5—4.5 sec. (at normal temperature with new battery). Flash working
Wide-angle — 0.6—8.4 m (2—27.6 ft.). Telephoto— 0.6—5.6 m (2—18.4 ft.) with ISO 400 color negative film.
Flash modes: AUTO (Automatic flash activation in low-light and backlight). AUTO-S (Red-eye reducing, in low-light and backlight). OFF (No flash). FILL-IN (Forced activation), (for night scene with slowest shutter speed of 4 sec. Other functions operate as the same as in Auto mode.)
Battery check: Displayed on LCD panel.
Weatherproof: IEC Standard publication 529.
Classification of degrees of protection provided by enclosures. Degrees of protection indicated by the second characteristic numeral 4 • Short description: Protected against splashing water • Definition: Water splashed against the enclosure from any direction shall have no harmful effect • Test for second numeral 4: The equipment is sprayed from all practical directions.
The water pressure is adjusted to give a delivery rate of 10 lit./min. The test duration shall be 1 min. per m 2 of calculated surface area of the enclosure with a minimum duration of 5 min.
Power source: 3 V lithium battery (CR123A/DL123A)
Dimensions: 124 (W) x 64.5 (H) x 45 (D) mm (4.9 x 2.5 x 1.8 in) (without protrusions).
Weight: 220 g (7.8 oz) (without battery).
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE OR OBLIGATION ON THE PART OF THE
OLYMPUS OPTICAL CO., LTD.
San-Ei Building, 22-2, Nishi Shinjuku 1-chome, Shinjuku-ku, Tokyo, Japan. Tel. 03-3340-2211
OLYMPUS AMERICA INC.
Two Corporate Center Drive, Melville, NY 11747-3157, USA Tel. 516-844-5000
OLYMPUS OPTICALCO. (EUROPA) GMBH.
(Premises/Goods delivery) Wendenstrasse 14-16, 20097 Hamburg, Germany. Tel. 040-237730
(Letters) Postfach 10 49 08, 20034 Hamburg, Germany.
OLYMPUS OPTICAL CO. (U.K.) LTD.
2-8 Honduras Street, London EC1Y 0TX, United Kingdom. Tel. 0171-253-2772
PRINTED IN HONG KONG
ダウンロード
ドキュメントの公開リンク
広告