Omega Vehicle Security OS520 User's Manual

WARRANTY/DISCLAIMER

OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a period of 25 months from date of purchase of the base unit and 13 months from date of purchase on

Laser Sight Module. OMEGA’s WARRANTY adds an additional one (1) month grace period to the normal one (1) year product warranty to cover handling and shipping time. This ensures that OMEGA’s customers receive maximum coverage on each product.

If the unit malfunctions, it must be returned to the factory for evaluation.

OMEGA’s Customer Service Department will issue an Authorized Return

(AR) number immediately upon phone or written request. Upon examination by OMEGA, if the unit is found to be defective, it will be repaired or replaced at no charge. OMEGA's WARRANTY does not apply to defects resulting from any action of the purchaser, including but not limited to mishandling, improper interfacing, operation outside of design limits, improper repair, or unauthorized modification. This WARRANTY is

VOID if the unit shows evidence of having been tampered with or shows evidence of having been damaged as a result of excessive corrosion; or current, heat, moisture or vibration; improper specification; misapplication; misuse or other operating conditions outside of

OMEGA’s control. Components in which wear are not warranted, include but are not limited to contact points, fuses, and triacs.

OMEGA is pleased to offer suggestions on the use of its various products. However, OMEGA neither assumes responsibility for any omissions or errors nor assumes liability for any damages that result from the use if its products in accordance with information provided by OMEGA, either verbal or written. OMEGA warrants only that the parts manufactured by the company will be as specified and free of defects. OMEGA MAKES NO OTHER

WARRANTIES OR REPRESENTATIONS OF ANY KIND

WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF TITLE,

AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

ARE HEREBY DISCLAIMED. LIMITATION OF LIABILITY: The remedies of purchaser set forth herein are exclusive, and the total liability of OMEGA with respect to this order, whether based on contract, warranty, negligence, indemnification, strict liability or otherwise, shall not exceed the purchase price of the component upon which liability is based. In no event shall OMEGA be liable for consequential, incidental or special damages.

CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a “Basic Component” under 10 CFR 21 (NRC), used in or with any nuclear installation or activity; or (2) in medical applications or used on humans. Should any Product(s) be used in or with any nuclear installation or activity, medical application, used on humans, or misused in any way, OMEGA assumes no responsibility as set forth in our basic

WARRANTY/DISCLAIMER language, and, additionally, purchaser will indemnify OMEGA and hold OMEGA harmless from any liability or damage whatsoever arising out of the use of the Product(s) in such a manner.

RETURN REQUESTS/INQUIRIES

Direct all warranty and repair requests/inquiries to the OMEGA Customer

Service Department. BEFORE RETURNING ANY PRODUCT(S) TO OMEGA,

PURCHASER MUST OBTAIN AN AUTHORIZED RETURN (AR) NUMBER

FROM OMEGA’S CUSTOMER SERVICE DEPARTMENT (IN ORDER TO

AVOID PROCESSING DELAYS). The assigned AR number should then be marked on the outside of the return package and on any correspondence.

FOR WARRANTY RETURNS, please have the following information available BEFORE contacting OMEGA:

1. Purchase Order number under which the product was

PURCHASED,

2. Model and serial number of the product under warranty, and

3. Repair instructions and/or specific problems relative to the product.

FOR NON-WARRANTY REPAIRS, consult OMEGA for current repair charges. Have the following information available BEFORE contacting OMEGA:

1. Purchase Order number to cover the COST of the repair or calibration,

2. Model and serial number of the product, and

3. Repair instructions and/or specific problems relative to the product.

OMEGA’s policy is to make running changes, not model changes, whenever an improvement is possible. This affords our customers the latest in technology and engineering.

OMEGA is a registered trademark of OMEGA ENGINEERING, INC.

© Copyright 2006 OMEGA ENGINEERING, INC. All rights reserved.

This document may not be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form, in whole or in part, without the prior written consent of OMEGA ENGINEERING, INC.

MQS2891-0903

5

3.

Press the key to lock the trigger. The icon will appear. This allows the thermometer to operate continuously whether or not the trigger is pulled. To unlock the trigger, press the again.

key

4.

To complete a temperature measurement, release the trigger; the thermometer goes into sleep mode.

NOTE: If the icon flashes and the unit beeps intermittently, the batteries must be replaced with fresh batteries immediately.

While in these 5 modes:

Use key to change temperature from °F to °C or vice versa.

Use key to turn on the display backlighting.

It is the policy of OMEGA Engineering, Inc. to comply with all worldwide safety and EMC/EMI regulations that apply. OMEGA is constantly pursuing certification of its products to the European New Approach Directives. OMEGA will add the CE mark to every appropriate device upon certification.

The information contained in this document is believed to be correct but OMEGA Engineering, Inc. accepts no liability for any errors it contains, and reserves the right to alter specifications without notice.

WARNING: These products are not designed for use in, and should not be used for, human applications.

PATENT NOTICE: U.S. PAT. D357,194, B1 5,368,392, 5,524,984, 5,727,880,

5,465,838 5,823,678, 5,823,679, 6,267,500B1, 6,123,453, 6,341,891B1/Canada

75811 D OMEGA ENGINEERING, INC., 2,116,055, 2,114,806/Czech Republic

25372/France 0378411 to 0378446, 2,767,921, 2 773 213 B1/Germany M 94 06

478.4, G 94 22 197.9, G 94 22 203.7/Italy RM940000913/Japan 988,378/

Netherlands 1007752, 25009-00/Spain mod. ut. 133292/Slovak Republic

24565/U.K. Registered 2041153, 9726133.3, EPO 0 644408, EP 1 085 307 A1

Other U.S. and International Patents Pending.

CAUTION: Use of controls or adjustments or performance of procedures other than those specified here may result in hazardous radiation exposure. Refer to the

Operator’s Manual for complete warnings and cautions.

6

VISUAL FUNCTION FLOW CHART

MODE DISPLAY DISPLAY MODE

☞

LCK

☞

LCK

☞

LCK

LCK

LAL

☞

LCK

ATC

☞

LCK

PRN

☞

(Model OS533)

LCK

☞

LCK

☞

☞

LCK

☞

LCK

HAL

☞

(Model OS531, OS532

OS530L, OS530HR)

CAUTION

OMEGASCOPE

®

LASER RADIATION - DO NOT STARE INTO BEAM

OUTPUT <1 mW, WAVELENGTH 630-670 nm

CLASS II (2) LASER PRODUCT, COMPLIES

WITH FDA 21CFR 1040.10 & EN60825-1/11.2001

Warning and

Certification

Label

QUICK START

OS531

OS532

OS533

OS534

OS530L

OS530HR

OS53x-CF

OS523

OS524

OMEGASCOPE

®

Handheld Infrared

Thermometer

For latest product manuals: omegamanual.info

OMEGAnet ® On-Line Service Internet e-mail omega.com [email protected]

U.S.A.:

ISO 9001 Certified

Servicing North America:

One Omega Drive, P.O. Box 4047

Stamford. CT 06907-0047

Tel: (203) 359-1660

FAX: (203) 359-7700 e-mail: [email protected]

Canada: 976 Bergar

Laval (Quebec) H7L 5A1, Canada

Tel: (514) 856-6928

FAX: (514) 856-6886 e-mail: [email protected]

For immediate technical or application assistance:

U.S.A. and Canada: Sales Service: 1-800-826-6342/1-800-TC-OMEGA ®

Customer Service: 1-800-622-2378/1-800-622-BEST ®

Engineering Service: 1-800-872-9436/1-800-USA-WHEN ®

Mexico: En Espan˜ol: (001) 203-359-7803

FAX: (001) 203-359-7807 e-mail: [email protected]

[email protected]

Servicing Europe:

Czech Republic: Frystatska 184, 733 01 Karviná, Czech Republic

Tel: +420 (0)59 6311899

FAX: +420 (0)59 6311114

Toll Free: 0800-1-66342 e-mail: [email protected]

Germany/Austria: Daimlerstrasse 26, D-75392 Deckenpfronn, Germany

Tel: +49 (0)7056 9398-0

FAX: +49 (0)7056 9398-29

Toll Free in Germany: 0800 639 7678 e-mail: [email protected]

United Kingdom: One Omega Drive, River Bend Technology Centre

ISO 9002 Certified Northbank, Irlam, Manchester

M44 5BD United Kingdom

Tel: +44 (0)161 777 6611

FAX: +44 (0)161 777 6622

Toll Free in United Kingdom: 0800-488-488 e-mail: [email protected]

START HERE

Using this Quick Start Manual

Use this Quick Start Manual with your OS530/OS520 series Handheld Infrared Thermometer to set it up and perform basic operations. These tasks are:

• Installing the Batteries

• Operating the Laser Sight

• Taking Temperature Readings

• Display Mode Sequence

For detailed information, refer to the

User’s Guide (M2891).

Getting Started

Parts of the Thermometer

2

Parts of the Display

Display

Mode

Display

Icons

Scrolls through

Display

Modes

Decrements

Data/

°F to °C or

°C to °F

LCK

ATC

HAL LOBAT

LAL PRN °F °C

Data

Associated with

Display Mode

Backlighting

Icon

Unit of

Measure

Main Display

Temperature

Locks

Trigger/

Enables

Alarms

Increments

Data/

Backlighting

ON/OFF

Figure 3. Display and Keypad View

Installing the Batteries

Invert the unit and install 4 fresh AA size batteries as shown in Figure 4.

3

Taking Temperature Readings

1.

Aim at the target. If you are not using the Laser

Sighting, use the “V” groove on top of the thermometer to align the target to the thermometer’s field of view.

Field of View

Target

(ACCEPTABLE) (UNACCEPTABLE)

Figure 6. Field of View Positions

2.

Pull and hold the trigger. To use the laser sighting, set the laser power switch to the ON position. The Power

Indicator LED and the laser beam will turn on. The laser beam will stay on as long as the trigger is pulled.

The target temperature and emissivity (E) will be displayed on the LCD. You can press the or key to increment or decrement the target emissivity.

Figure 1. Front of the Thermometer

Laser

Dot/Circle

Switch

Laser Beam

Aperture

Thermocouple Input

Socket (SMP) ac Adapter Input Jack

Analog Output Jack (1mV/deg)

RS-232 Phone Jack

(OS533, OS534,

OS523, OS524)

Identification Label

(bottom)

Tripod Thread

Mount

Figure 2. Rear of the Thermometer

Figure 4. Installing the Batteries

ac Operation

The thermometer may be operated on ac power using the optional ac adapter. 120Vac/60 Hz and

220Vac/50 Hz adapters are available.

Operating the Laser Sight Module

WARNING: DO NOT AIM THE LASER BEAM AT

ANYONE’S EYES.

The laser sight module is built into the thermometer.

Set the laser power switch to the ON position.

2 Types of Laser Beams

Laser Dot Laser Circle

Figure 5. Two Laser Configurations

The thermometer is ready for operation.

Figure 7. OS531, OS532, OS530L Field of View

0**

1' 20"

DISTANCE: SENSOR TO OBJECT (FT)

2' 3' 4' 5' 6' 7' 8'

4.8"

4.2"

3.6"

1.0"

1.0" @ 0" to 20"

1.0"

1.2"

1.8"

2.4"

3.0"

D:S = 20:1

2.5

4.0

6.0

2.5cm @ 51cm

*SPOT DIAMETER MEASURED

AT 90% ENERGY

8.0

40

10.0

80 120 160 200

DISTANCE: SENSOR TO OBJECT (CM)

12.2

244

Figure 8. OS533, OS530HR Field of View

4

Figure 9. OS534/OS523-1 Field of View

0

3"

DISTANCE: SENSOR LENS TO OBJECT (in.)

6"

9"12"

15"

0.9"

1.17"

.45"

.15"

.39"

.78"

D:S = 40:1

0

22

11.5

3.9

*SPOT DIAMETER MEASURED

AT 90% ENERGY

9.9

7.6

19.9

15.2

22.9

30.5

38.1

DISTANCE: SENSOR LENS TO OBJECT (cm.)

29.9

Figure 10. OS53x-CF Field of View

0' 3'

DISTANCE: SENSOR TO OBJECT (FT)

5' 10' 16'

2.9"

1.9"

0.9"@ 0

1.2"

1.0"

0.9"

D:S = 60:1

26

31

22mm @ 0

48

*SPOT DIAMETER MEASURED

AT 90% ENERGY

75

0 1.0

1.5

3.0

DISTANCE: SENSOR TO OBJECT (M)

5.0

Figure 11. OS523-2 Field of View

2’

DISTANCE: SENSOR TO OBJECT (FT)

3’

5’ 10’ 0’ 16’

4.0"

7.0"

.8"

.35"@ 24"

.9"

1.6"

21

22

9mm @ 610mm

42

*SPOT DIAMETER MEASURED

AT 90% ENERGY

101

181

0 .61

1.0

1.5

3.0

5.0

DISTANCE: SENSOR TO OBJECT (M)

Figure 12. OS523-3 Field of View

DISTANCE: SENSOR TO OBJECT (FT)

16' 50' 0' 82'

0.5"@ 0

0.9"

1.5"

5.1"

8.7"

D:S = 110:1

38

130

13mm @ 0

*SPOT DIAMETER MEASURED

AT 90% ENERGY

0 5 15

DISTANCE: SENSOR TO OBJECT (M)

221

25