advertisement
OWNER'S MANUAL
68CM CORDLESS REMOTE COLOUR TELEVISION
MODEL: 6825G
Type Tested
Electrical
Safety
AS/NZS 3250 Lic 4166
Standards Australia
APP No: N15899
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL:(02)9313 7111
FAX:(02)9313 7555 www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA:1300 657 888
Contents
Contents
Congratulations on your purchase of this Palsonic colour television receiver.
We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver.
Retain this manual in an easily accessible location for future reference.
Note: Screen displays and illustrations in this manual may differ from the actual ones for better visibility.
CONTENTS
Features ..................................................................................................................
Important Safety Cautions .......................................................................................
Identification of Controls ..........................................................................................
Installation ...............................................................................................................
Turning On/Off .........................................................................................................
Select Input Signal ..................................................................................................
Tuning In .................................................................................................................
Channel Selection ...................................................................................................
Adjusting Picture .....................................................................................................
Sound Control .........................................................................................................
Timer Setting............................................................................................................
System Setting.........................................................................................................
Other FunctionsS ....................................................................................................
Troubleshooting Guide ............................................................................................
Specifications ..........................................................................................................
22
24
27
28
16
17
18
20
8
11
12
13
1
2
4
Features
Hyperband
2
Intellectualized I C bus control
256 preset channels
Full function remote control
AV input & output terminals, DVD input terminals
Intellectualized remote controller caller
Automatic channel preset
Clock/Game/Calendar
ON timer/OFF timer
Channel Exchange
Selectable picture and selectable sound
Features
1
Important Safety Cautions
Safety Cautions
1 When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area.
2 Do not expose the TV set to rain or excessive moisture. Avoid using the set in very warm or damp places and never use it in a bathroom.
3 When cleaning dust off the picture tube disconnect the power first. You can wipe lightly with a piece of dry, clean and soft cloth.
4 Avoid exposing the set to direct sunlight and other sources of heat to prevent damage to the cabinet and components.
2
!
This TV set can operate on an AC power of 240V, 50HZ. You must not use a power supply of any other type.
5 High voltage exists in this TV set. Do not remove the cover
6 Do not cover the ventilating hole in the cabinet
Keep a space of more than 5cm from the walls to the
TV set to ensure adequate ventilation.
7 If the power cord or the plug is damaged contact a qualified service department for service.
8
When the TV set is to be left unattended for a long period of time, turn off the power supply and remove the plug from the wall outlet.
3
Identification of Controls
Front
1. TV/VIDEO input select.
2. Volume up; menu item adjust.
3. Volume down; menu item adjust.
4. To enter menu operation.
5. Channel up; menu item select.
6. Channel down; menu item select.
7. To call remote controller.
8. AV3 inputs (VIDEO, AUDIO L/MONO, R)
4
Back
3
4
5
6
1. Antenna input.
3. AV 2 inputs (VIDEO, AUDIO L/MONO, R).
4. S-VIDEO input.
5. AV outputs (VIDEO, AUDIO L/MONO, R).
6. AV 1 inputs (VIDEO, AUDIO L/MONO, R).
1
2
5
Identification of Controls
(continued)
Remote Controller
The switch of the remote controller caller
Power on/standby
Direct channel selector
TV/VIDEO input select
Colour and sound system select
Volume up/dowm select; menu item adjust
Channel edit
To enter/exit game menu
To mute the sound
Program scanning
On-screen call
Previous channel
To enter menu operation
Channel up/down select; menu item select
Picture mode select
To enter game/Serve as confirm button in GOBANG game
Game controller
Sleep timer
Sound mode select
6
Installing batteries
1
Effective range of the Remote
2
Open the battery cover.
Install two "AAA" batteries matching the +/- polarities of the battery to the +/- marks inside the battery compartment.
3
Replace the battery cover.
!
Notes:
The battery life should be about one year under normal use. Do not try to recharge batteries not intended to be recharged.
Use only the size and type of batteries specified. Do not mix different types of batteries together or old batteries with fresh ones.
When the remote control will not be used for a long period of time or when the batteries are worn out, remove the batteries.
Do not throw the batteries into a fire. Dispose of used batteries in the specified manner.
Do not drop, dampen or disassemble the remote control.
!
Notes:
When there is an obstacle between the TV and the transmitter, the transmitter may not operate.
When direct sunlight, and incandescent lamp, fluorescent lamp or any other strong light shines on the REMOTE SENSOR of the TV the remote operation may be unstable.
7
Installation
INSTALL the unit in a room where direct light will not fall upon the screen.
Total darkness or a reflection on the picture screen may cause eyestrain.
Soft and indirect lighting is recommended for comfortable viewing.
Antenna installation
Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used. The exact type and position of the aerial will depend upon your particular area.
!
Notes:
It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur due to radio wave conditions.
The aerial cable should not be bundled with the power cord and the like.
8
This TV set provides 3 groups of AV input (including one group of DVD inputs) and 1 group of AV out puts for your convenient connection to VTR, DVD or video camera to enjoy the high quality picture.
Please refer to the owner's manual of the equipment to be connected as well.
Using AV Inputs
!
Notes:
In AV1 inputs, the S-VIDEO terminal is prior to the VIDEO1 terminal. When both S-VIDEO and video signals are input, the S-VIDEO signal is selected. To view a video sognal, disconnect the
S-VIDEO connection.
The AV2 inputs and the DVD inputs use the same audio terminals. When both DVD and video signal are input, the DVD inputs are prior to VIDEO2 terminal and DVD signal is selected. To
9
Installation
(continued)
Using DVD inputs
Using AV outputs
10
Turning on/off
Turning on
1 Press the Power Switch on the
TV set.
The TV set is in STANDBY and the
Yellow indicator lights up.
2, 2
2 In STANDBY mode, press the button or 0-9 buttons on the remote controller and the TV set is turned on.
3 In STANDBY mode, you can also press the
VOL , CH or TV/AV button on the set to turn on.
!
Notes:
If there is no input signal, then a blueback appears. After 15 minutes, the set auto goes to STANDBY.
Turning off
1
Press the Power Switch on the TV set if you want to cut off the power completely.
2
If you want to turn off the TV set temporarily, press the button on the remote controller.
11
2
1, 1
3
Select Input Signal
Watching AV program
1 To watch video program from AV input, PressTV/AV button repeatedly until you see the appropriate input indicator on the screen
Video1 Video2 Video3 10
4
!
Notes:
In AV1 inputs, the S-VIDEO terminal is prior to the VIDEO1 terminals. When both S-video and video signal are input, the Svideo signal is selected (the OSD is "S-VIDEO1"). To view a video signal, disconnect the S-VIDEO connection.
The AV2 inputs and the DVD inputs use the same audio terminals.
When both DVD and video signal are input, the DVD inputs are prior to VIDEO2 terminals and the DVD signal is selected (the OSD
Switching from AV to TV
1 Press TV/TV button repeatedly until the TV program appears.
2 Press digit buttons to switch back to TV mode.
3 Press CH+ or CH- button to switch back to TV mode.
4 Press button to switch back to TV mode.
12
1
1
2
2
3
2, 2
To enter the SEARCH menu
1
2
Press MENU button.
Press VOL+ or VOL- button to select SEARCH icon.
3 Press CH- button to disply the Serach menu.
Auto Search
Please enter the SEARCH menu first
1
Press CH+ or CH- button to select AUTO MEMORY item.
2
Press VOL+ button to start
AUTO MEMORY.
All active channels will be preset and stored into the memory automatically.
After presetting, the TV will stop at the first channel program.
!
Notes:
During the process of AUTO MEMORY, pressing the VOL- button will stop the process and go to the first channel.
Tuning in
13
1,3
1,3
Tuning in
(continued)
2,4
2,4
Manual Search
Please enter the SEARCH menu first
Use MANUAL SEARCH function if desired channels cannot be preset or if you would like to preset channels to specific position numbers one by one
1 Press CH+ or CH- button to select POSITION item.
2 Press VOL+ or VOL- buttons to select a channel number (ranging from 000~255).
3 Press CH+ or CH- button to select SEARCH item.
4 Press VOL+ or VOL- button to start program search manually.
Pressing VOL+, the set searches towards higher frequency;
Pressing VOL-, the set searches towaords lower frequency;
The search stops when a program is located and this program will be stored in the specified position number.
!
Notes:
1.
You can use BAND selection to quicken search process if you know which band your desired progam locates in. The band switches amoung VHFL, VHFH and UHF.
2.
Repeat the above steps if you want to store another program in other position numbers
To skip an unnecessary channel
1 Press CH+ or CH- button to select POSITION item.
2 Press VOL+ or VOL- button to select a channel number, for example, channel 009.
3 Press CH+ or CH- button to select SKIP item.
4 Press VOL+ or VOL- button to select ON.
Now channel 9 will be skipped when you browse by CH+ or CH- button.
To restore a skipped channel, please select channel by step
1, 2 then repeat step 3 and 4 and set SKIP item to OFF.
14
1,3
Fine tuning
Please enter the SEARCH menu first
Fine tuning is not necessary under normal conditions. However, in area of inferior broadcast conditions where adjustment is necessary for better picture and sound, use
Fine tuning.
2,4
1 Press CH+ or CH- button to select POSITION item.
2 Press VOL+ or VOL- buttons to select a channel number you want to fine-tune (for example, channel 99).
3 Press CH+ or CH- button to select MFT item.
4 Press and hold VOL+ or VOL- button till the best possible picture and sound are obtained.
Calling the on-screen display
You can call the on-screen display by pressing the DSP button on the remote controlle. The first press of the DSP button display the current state (if in TV mode, the current channel number will display) and the next press display the clock time. Press this button again to cancel the OSD.
DSP
15
2
1, 1
3
Channel Selection
4
1
Using 0-9 direct channel selector
To select one-digit channel
There are 3 ways for you to select an one-digit channel number, for example, channel 9 as follows.
A Press "9" button
9 - -
After 2 seconds
9
B Press "0" button
0 - -
Press "9" button
0 9 -
After 2 seconds
9
C Press "0" button
0 - -
Press "0" button
0 0 -
Press "9" button
9
To select two-digit channel
There are 2 ways for you to select a two-digit channel number, for example, channel 19 as follows
A Press "1" button
1 - -
Press "9" button
1 9 -
After 2 seconds
19
B Press "0" button
0 - -
Press "1" button
0 1 -
Press "9" button
19
To select three-digit channel
To select a three-digit channel number, for example, channel 199, you just input the channel number on by one. Be sure that the period of two-press channel should be within 2 seconds.
Press "1" button
1 - -
Press "9" button
19 -
Press "9" button
199
2
Using CH+ or CH- button
Press CH+ button, the channel number increases;
Press CH- button, the channel number decreases.
3
Using previous channel button
Press this button to switch between the current channel and previous channel.
16
2,4
Adjusting Picture
2, 2
1
2,5,3
6
3
Adjusting picture
1
2
Press MENU button.
Press VOL+ or VOL- button to select PICTURE icon.
3 Press CH- button to disply the PICTURE menu.
4 Press CH+ or CH- button to select item.
5
Picture mode
Press VOL+ or VOL- button to adjust.
Item
Color
Brightness
Contrast
Sharpness
Tint
Picture mode
BRILLIANT STANDARD SOFTNESS
75 50 50
75 50 50
100
50
90
40
70
30
VOL paler
PERSONAL
VOL + deeper darker weaker softer purplish lighter stronger sharper greenish
* Note: The item TINT is for NTSC only.
The adjusted setting are stored in the PERSONAL mode.
There are three preset picture modes and one user-set picture mode. Press P.M button to select a picture mode according to you favourites.
6 Press P.M button to select picture mode.
Setting blue background
1
Enter the PICTURE menu according to the above steps 1-3.
2
Press CHL+ or CH- button to select B.B item.
3
Press VOL+ or VOL- button to select ON or OFF.
If the B.B item is set ON, the TV set will display a blue background when there is no input signal.
17
2
Sound Control
Adjusting volume
1 Use VOL+ or VOL- button.
Press VOL+ button, the volume increases;
Press VOL- button, the volume decreases.
1
2 Use MUTE button.
If you want to mute the sound, press
MUTE button on the remote.
To resume the sound, press this button again.
!
Notes:
You can also resume the sound by pressing VOL+ or VOL- button.
Selecting sound mode
You can quickly select sound mode by pressing S.M button.
S.M
NATURAL
THEATER
NEWS
MUSIC
18
4,2
1
2,5,3
3
Setting WOOFER
1 Press MENU button.
2 Press VOL+ or VOL- buttons to select SETTING icon.
3 Press CH- button to display the SETTING menu.
4 Press CH+ or CH- button to select WOOFER item.
5 Press VOL+ or VOL- button to select ON or OFF.
Setting BALANCE
1 Enter the SETTING menu according to the above steps 1-3.
2 Press CH+ or CH- button to select BALANCE item.
3 Press VOL+ or VOL- button to adjust.
Press VOL+ button, to decrease the left sound channel;
Press VOL- button, to decrease the right sound channel.
19
1
Timer Setting
To enter the TIMER menu
1 Press MENU button.
2 Press VOL+ or VOL- buttons to select TIMER icon.
3 Press CH- button to display the TIMER menu.
1
2,2
2
Setting CLOCK
Please enter the TIMER menu first.
1 Press CH+ or CH- button to select CLOCK item.
Press VOL+ or VOL- button to set current time.
3
SLP
Setting sleep timer
You can quickly set the sleep timer by using the SLP button on the remote controller. With every press of this button the sleep time changes as follows;
OFF 120 Min.
110Min.
20 Min.
10 Min.
For example, you would like the TV to auto turn off in 60 minutes, you can press the SLP button repeatedly till the screen displays as the right figure.
If you want to cancel the sleep timer, you can press the SLP button repeatedly till "OFF" displays on the screen.
SLEEP : 60MIN.
20
1,3
1,3,5
2,4
2,4,6
Setting OFF TIMER
Please enter the TIMER menu first.
1 Press CH+ or CH- button to select
OFF TIMER item.
2 Press VOL+ or VOL- button to select ONCE or EVERY.
3 Press CH- button.
4 Press VOL+ or VOL- button to set the OFF time, for example 22:00.
The set auto turns off when the time is 22:00. If you set the OFF TIMER item to ONCE, this function only effects once; If you set the OFF TIMER item to
EVERY, this function effects every day. To cancel this function, please set the
OFF TIMER to OFF.
!
Notes:
The Time can not be accessed until you set the Off Time to Once or Every.
Setting ON TIMER
Please enter the TIMER menu first.
1 Press CH+ or CH- button to select
ON TIMER item.
2 Press VOL+ or VOL- button to select ONCE or EVERY.
3 Press CH- button.
4 Press VOL+ or VOL- button to set the ON time, for example
18:00.
5 Press CH- button to selct POS item.
6
!
Press VOL+ or VOL- button to select a channel number, for example, channel 10.
The set in STANDBY mode auto turns on and goes to channel 10 when the time is 18:00. If you set the ON TIMER item to ONCE, this function effects only once; If you set the ON TIMER item to EVERY, this function effect every day.
To cancel this function, set the ON TIMER to OFF.
Notes:
The Time can not be accessed until you set the ON TIMER to ONCE or EVERY.
When you are setting the time by VOL+/- button, if you press and release within
0.7 seconds, the time's increase or decrease step is 1 minute; if you press and hold for more than 0.7 second, the time increase or decreas step is 10 minute.
21
1,3
System Setting
To enter the Setting menu
1 Press MENU button.
2 Press VOL+ or VOL- buttons to select SETTING icon.
3 Press CH- button to display the SETTING menu.
1
2,2,4
Selecting the OSD language
Please enter the SETTING menu first.
This TV set provides ENGLISH ans CHINESE ( ) OSD language.
1 Press CH+ or CH- button to select LANGUAGE item.
2 Press VOL+ or VOL- button to select the OSD language.
3
Setting the colour and sound system
Please enter the SETTING menu first.
If the picture colour or sound is abnormal, maybe the colour and sonund system setting is wrong. You can select a proper colour or sound system as follows;
1 Press CH+ or CH- button to select C.SYSTEM item.
2 Press VOL+ or VOL- button to select a proper colour system.
3 Press CH+ or CH- button to select S.SYSTEM item.
4 Press VOL+ or VOL- button to select a proper sound system.
!
Notes:
You can quickly set colour and sound system by pressing the SYS button on the remote controller.
Please select item by CH+/- button and adjust by
VOL+/- button.
22
2,4,6
1
SCAN
3,5,7
Channel Edit
This TV set enables you to edit the channel programs.
1 Press EDIT button on the remote controller.
2 Press CH+/- to select CHANNEL 1 item.
3 Press VOL+/- to select the first target channel.
4 Press CH+/- to select CHANNEL 2 item.
5 Press VOL+/- to select the second target channel.
6 Press CH+/- to select EXCHANGE item.
7 Press VOL+/- to exchange the two channel program.
To exchange more channels' programs, please repeat the above steps.
Channel scanning
Press SCAN button on the remote controller and the TV set begins program scanning. All active channels will be scanned on by one. After scanning, the set stops at the orginal channel before the program scanning begins. Press any button can stop the process of scanning end the set stops at the current scanning channel.
CHANNEL SCANNING
1
23
1
Game control buttons
2
Playing BOX game
Please enter the OTHER menu first.
1
2
Press CH+ or CH- button to select
BOX item.
Press VOL+ or VOL- buttons to enter.
Button Introduction
Button Name
F1
Function
To transform the shape.
F2
F3.
To accelerate falling down.
To move the boxes.
How to play?
1.
Press any one of F1, F2 or F3 buttons to start the game.
2.
Press F1 to transform the shape; F2 to accelerate falling down; F3 to move the boxes.
3.
When the boxes are placed fully in one row, this row will disappear and the score increases 1 point. The score increases 3 points if two rows of boxes disappear at the same time. Disappearing three rows at the same time makes 7 points.
4.
The right window indicates the nw=ext shape for your reference.
5.
The game is over when the boxes are piled to the top of the window.
6.
Pressing the GAME button can exit the game.
Playing GOBANG game
Please enter the OTHER menu first.
1 Press CH+ or CH- button to select
GOBANG item.
2 Press VOL+ or VOL- button to enter.
Button Introduction
: To move chessman
: To confirm your move
How to play?
In this game, you will play against the TV set. The part who firstly connects a continuous five chessmen in horizontal, vertical or diagonal direction wins the game.
25
Calling
Switch
1
Other Functions
(continued)
2
Calendar setting
Please enter the OTHER menu first.
1 Press CH+ or CH- button to select CALENDAR item.
2 Press VOL+ or VOL- buttons to enter CALENDAR.
Pressing or button can select year, month or date; Pressing or button can adjust year, month or date.
Press any button except , , or to exit calendar.
Remote controller caller
This TV set provides RC (remote contrller) calling function, which wil help you to find the RC if you do not know where the RC is.
You just need to press the CALL button on the set's side panel (the set should be in
STANDBY or working), the RC will play a musical tone so that you can quickly get it.
When the set auto turns on through ON
TIMER function, the RC also plays a musical tone to remind you. To active the above functions, please turn the Calling Switch to
ON firstly (the Calling Switch is on the top of the RC's left side).
!
Notes:
1. The RC will play a musical tone when you turn the Calling Switch to ON. If you want to stop the music, please turn the Calling Switch to OFF and then turn it ON quickly.
2. The RC consumes more power if the calling function is turned on, so we recommend you to use high-capacity batteries. If you do not use the RC for a long period of time, please turn off the calling function to avoid power exhaustion.
3. If the Calling function is turned on and the RC is close to mobile phone or other radiant equipment, the RC may be triggered and play the musical tone.
To stop the music, please follow step 1.
4. It is normal that some slight stripes appear on the screen when you press CALL button on the set.
5. The top and middle position of the Calling Switch is ON and the bottom position is OFF.
26
Other Functions
To enter the OTHER menu
1 Press MENU button.
2 Press VOL+ or VOL- buttons to select OTHER icon.
3 Press CH- button to display the OTHER menu.
!
Notes:
You can quickly access the OTHER menu by pressing GAME button on the remote controller.
1-9 digit buttons
1
Game control buttons
1
2,2
3
Playing HITTING game
Please enter the OTHER menu first.
1 Press CH+ or CH- button to select
HITTING item.
2 Press VOL+ or VOL- button to enter.
Button
Button Introduction
Name
F1
How to play?
F2
F3.
Function
To start the game.
To pause the game.
To exit the game.
Press F1 button to start the game. The 1-9 digit buttons on the remote controller match the 9 target boxes on the screen. Pressing any one of these buttons can hit the relevant box, The score will be counted according to the amount of the box hit within the stipulated time.
Playing SLOT game
Please enter the OTHER menu first.
1 Press CH+ or CH- button to select
SLOT item.
2 Press VOL+ or VOL- button to enter.
Button Name Function
Button
Introduction F1
To start the game.
To pause the game or set rate.
F2
F3.
To exit the game.
How to play?
Before you start the game, you can set the rate by using F2. Press F1 button to start the game. Press F2 to control the card (or set the rate). If you turn over 3 cards with the same value then you win the game, or you will lose the game. If you want to exit the game, please press F2 to pause the game firstly before you press F3.
24
Troubleshooting Guide
Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing.
Symptoms
Power is not turned on
Poor colour, poor tint
Spots appear on the screen
Stripes appear on the screen
Double images or "ghosts"
Snowy picture
No Program menu page and the maximum volume is only 60.
TV cabinet creaks
Check the following items
Be sure the power cord is plugged in.
Contrast, colour, tint are not correctly adjusted
Possible interferences of automobiles, motorcycle, trolley bus, neon lamps, etc.
Possible interference of electronic interference from another TV set, a computer, an electronics game machine, a broadcast station, etc.
This may be caused by reflections from nearby mountains or buildings.
Check the antenna direction.
It is possible that the aerial "lead-in" is damaged or comes off.
Check the antenna direction.
Check whether the HOTEL mode is in LOCK status.
Remote controller does not work
Unevenness in colour in some parts of the screen
Remote controller plays music continually or makes "Beep" sound
Even if the picture or the sound is normal, changes in room temperature sometimes makes the TV cabinet expand or contract, making a noise. This does not indicate a malfunction.
The batteries may be worn out.
The batteries may be installed with their polarity reversed.
When the set is switched on, do not shift or move the set around. Sometimes it may develop an unevenness in colour in some parts of the screen.
This can be eliminated by switching off the set with the POWER switch and wait for 10 minutes before switching on again.
The batteries power is insufficient, please replace with high-capacity batteries.
27
Specifications
Power Supply:
Power Consumption:
Dimensions(mm):
Weight(kg):
CRT:
AC 240V, 50Hz
140W
670(W) x 688(H) x 510(D)
43
68cm
TV system & channel range
System VHF UHF
PAL-B/G 2-12 21-69
CATV
X~Z+2,S1~S41
Color System:
Sound output:
Accessories:
PAL-B/G NTSC playback
6W x 2
Remote controller X 1
!
Design and specifications are subject to change without notice.
28
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL:(02)9313 7111
FAX:(02)9313 7555 www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
604-K29183-01
advertisement
Related manuals
advertisement