advertisement
OWNER'S MANUAL
76CM CORDLESS REMOTE LCD TV/MONITOR
MODEL: TFTV765
N111
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555 www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
Contents
Congratulations on your purchase of this
Palsonic LCD TV.
We recommend that your thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this LCD TV.
Retain this manual in an easily accessible location for future reference.
Note:
Screen displays and illustrations in this manual may differ from the actual ones for better visibility.
Contents ...........................................
Important Safety Cautions ..............
Identification of controls .................
Front ...........................................
Back ............................................
Remote control ...........................
Battery installation ......................
Effective remote range ...............
Installation ........................................
Antenna installation/
Adaptor connection .....................
Connecting video/audio equipment ...................................
Connecting DVD player and speaker .......................................
Connecting YPbPr terminals ......
Connecting VGA interface ..........
Elevation adjustment ..................
Menu introduction ............................
Turning On/Off ..................................
Turning On ....................................
Turning Off ....................................
Selecting input signal ....................
Channel Preset .................................
To enter into CHANNEL
SETTING menu ..........................
Auto Search ................................
Manual Search ...........................
Fine tuning ..................................
Channel Skipping .......................
8
9
17
17
17
17
18
7
7
5
6
8
4
4
1
2
14
16
16
16
10
11
12
13
16
17
Channel edit ...............................
Channel Select ...............................
Picture Adjustment ........................
Sound ..............................................
System Setting ...............................
To enter into SETUP menu ........
Colour system ............................
Sound System ............................
Setting OSD Language ..............
Setting OSD position ..................
Setting OSD Background ...........
Seeting ZOOM Mode .................
Timer ...............................................
Use SLP button ..........................
Use CLK button ..........................
Adjustment in YPbPr mode ..........
To enter into YPbPr mode ..........
Adjusting picture .........................
Adjusting horizontal/vertical position .......................................
24
24
24
25
22
23
23
23
25
25
22
22
22
22
18
19
20
21
Adjustment in PC mode ................
To enter into PC mode ...............
PC signal format .........................
Use AUTO ADJ. button ...
Adjusting bright and contrast ......
Adjusting phase and frequency ..
Adjusting Colour temperature .....
Trouble Shooting ...........................
Specifications ................................
26
27
27
27
25
26
26
26
28
29
1
Important Safety Cautions
When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area.
Water and moisture - Do not use this product near water - for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. Do not use immediately after moving from a low temperature to high temperature environment, as this causes condensation, which may result in fire, electric shock, or other hazards.
Heat sources - Keep the product away from heat sources such as radiators heaters, stoves other heat generating products (including amplifiers).
requirement of environment temperature;
-20
0
C~50
0
C for storage; 0
0
C~40
0
C for working.
The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product.
Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings.
This product is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the the manufacturer's instructions are followed.
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Do not place the product on an unstable trolley, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a trolley, stand, tripod, and bracket or table recommended by the manufacturer or sold with the product.
2
This TV set can be operated on a power of ~240V 50Hz. You must not use a power supply of any other type.
When relocating the product placed on a trolley, it must be moved with the utmost care. Sudden stops, excessive force and uneven floor surfaces can cause the product to fall from the trolley.
The power cords must be routed properly to prevent people from stepping on them or objects from resting on them. Check the cords at the plugs and product.
Power supply cords should be routed so that they are not likely to be walked on or snagged by items placed upon or against them. Pay particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product.
If the power cord or the plug is damaged contact a qualified service department for service.
Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electric shock.
High Voltage exists in this TV set. Do not remove the cover.
In case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorised parts can result in fire, electric shock and/or other danger.
The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or impacted upon by other objects. Be careful not to be injured by broken glass pieces in case the LCD panel breaks.
Don't try to push anything into the cabinet or place any vessel with water on the
TV set.
For added protection for this television equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the equipment due to lightning and power-line surges.
3
Identification of controls
Front
Remote sensor
Indicator
To enter into MENU
Channel up
Channel down
Volume up
Volume down
Power on/Standby
To select input signal
4
Back
Video input
S-video input
DVD inputs
HDTV YPbPr inputs
VGA input Antenna input
DC input
Speaker outputs
Earphone jack
PC audio line in
Audio inputs
HDTV Audio inputs
5
Identification of controls
(continued)
Remote Control
Power on/Standby
Volume down
To enter into MENU
Colour/Sound system select
Zoom select
Auto correct picture
Picture mode select
Channel select
Input signal select
Still picture
OSD position select
Adjusting Bass
/
Sound Mute
Channel up
Volume up
Channel down
To exit OSD menu
Sleep timer
Clock/Timer setting
Previous channel
On-screen display
Adjusting Treble
6
Battery installation
Please install the batteries before using the remote control unit.
Effective remote range
Open the battery cover.
5m
POWER
VOL
-
MENU
CH
CH
VOL
+
ENTER
C.SYS
ZOOM CLK SLP
AUTO.ADJ
P.M
DSP
1
4
7
AV
2
5
8
0
3
6
9
-
--
STILL
OSD
POSITION Bass+ Treb+
Bass Treb-
Install two "AAA" batteries matching the +/polarities of the battery to the +/- marks.
Replace the battery cover.
Notes:
When the remote control will not be used for a long period of time or when the batteries are worn out, remove the batteries.
Do not throw the batteries into a fire.
Dispose of used batteries in the specified manner.
Do not drop, dampen or disassemble the remote control.
7
Notes:
There should be no obstacle between the TV and the transmitter.
Use the remote control within the effective range as the above figure.
If the remote control does not work, please check whether the batteries are exhausted or the polarity is wrong.
When direct sunlight, and incandescent lamp, fluorescent lamp or any other strong light shines on the REMOTE SENSOR of the
TV the remote operation may be unstable.
Installation
Antenna installation/Adaptor connection
Before using this equipment, please connect the AC power adaptor correctly.
Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used. The exact type and position of the aerial will depend upon your particular area.
AC power adapter
Notes:
Turn off the power firstly when you connect a outdoor antenna to the Antenna input terminal.
When installing an outside antenna system, extreme care should be taken to keep from touching power lines or circuits as contact with them might be fatal.
In thunder and lighting weather, please disconnect the outdoor antenna to avoid thunder/lighting strike.
8
Connecting video/audio equipment
To S-video input
R W
To audio inputs
To video input
Y R W
To audio inputs
Y Yellow (video)
W
White (audio L/MONO)
R
Red (audio R)
W R
To audio outputs
Video equipment with S-video terminal
To video output
To audio outputs
Y W R
Video equipment without S-video terminal
To ANT output
To ANT output
9
Installation
(continued)
Connecting DVD Player and speakers
To YCbCr inputs
G
B
R R W
To audio inputs
Red Black Red
To speaker
To YCbCr outputs
G B
R W R
To audio outputs
DVD Player
W
White (audio L/MONO)
R
Red (audio R, Cr)
G
Green (Y)
B
Blue (Cb)
10
Connecting YPbPr terminals
To YPbPr inputs
G
B
R
R W
To audio inputs
W
White (audio L/MONO)
R
Red (audio R, Pr)
G
Green (Y)
B
Blue (Pb)
To YPbPr outputs
G
B R R
To audio
W
outputs
SET TOP BOX
(Or other equipment with YPbPr output terminals)
11
Installation
(continued)
Connecting VGA interface
To VGA input interface
To LINE in
Equipment with
VGA output interface
To LINE out
To VGA output interface
12
Elevation adjustment
You can adjust the angle of the LCD TV/Monitor as follows.
The elevation can be adjusted from -5 0 to +10 0 .
13
Menu Introduction
There are four pages of
MENU
in TV, PC and YPbPr mode.
In
MENU
operations, the
CH /
buttons are used to select item upwards or downwards; the
VOL+/-
buttons are used to adjust or confirm selected item.
Press
MENU
button in TV mode
PICTURE SETTING
Brightness
+
Contrast
-
+
Color
-
+
Sharpness
-
+
Tint
-
+
50
50
50
50
50
<V-> or V+> key to change
Press
MENU
button
Bass
Treble
Balance
-
-
-
SOUND
<V-> or V+> key to change
Press
MENU
button
+
+
+
25
25
25
Color sys
Sound sys
Language
OSD position
OSD background
SETUP
AUTO
BG
Eng
Upper Left
Opaque
<V-> or V+> key to change
Press
MENU
button
CHANNEL SETTING
Auto search
Search
Fine Tune
Change Prog
Current Prog
Change to Prog
Skip
12
15
ON
<V-> or V+> key to change
To adjust the picture's brightness.
To adjust the picture's contrast.
To adjust the picture's colour saturation.
To adjust the picture's sharpness.
To adjust the picture's skin colour. (This item is available only in NTSC).
To adjust the Bass.
To adjust the Treble.
To adjust the Balance.
To adjust colour system.
To adjust sound system.
To select OSD menu language.
To select OSD menu position.
To set OSD background.
To start auto search.
To enter into channel search menu.
To enter into fine tuning menu.
To exchange current channel with the selected target channel.
To display current channel number.
To select a target channel to exchange with current channel.
To skip or unskip, current channel.
14
Press
MENU
button in PC mode
Brightness
PICTURE SETTING
+
Contrast
+
Phase
+
Frequency
+
USER_R
+
USER_G
-
+
USER_B
-
+
Color Temp 9300K
25
25
25
25
25
25
25
<V-> or V+> key to change
Press
MENU
button
Horizontal
PICTURE POSITION
+
Vertical
-
+
Reset
<V-> or V+> key to change
25
25
Press
MENU
button
Bass
Treble
Balance
SOUND
-
-
-
<V-> or V+> key to change
+
+
+
25
25
25
Press
MENU
button
Language
OSD position
OSD background
SETUP
Eng
Upper Left
Opaque
<V-> or V+> key to change
To adjust picture's brightness and contrast in
PC mode. (not affect picture in TV or AV mode)
If the best picture can not be obtained after many times of auto correction, you can adjust these two items to obtain the best picture.
Only when the "Color temp" is set to "User", these three items are adjustable.
To adjust colour temperature between 9300K,
7300K, 6500K, and User.
When the VGA input signal is nonstandard, adjust these two items until proper picture position is obtained.
To reset to factory settings.
To adjust the Bass.
To adjust the Treble.
To adjust the Balance.
To select OSD menu language.
To select OSD menu position.
To set OSD background.
15
Turning On/Off
POWER
CH
VOL
-
MENU
CH
VOL
+
ENTER
C.SYS
ZOOM
CLK SLP
AUTO.ADJ
P.M
DSP
1 2 3
4
7
5
8
6
AV
0
9
-
/
--
STILL
OSD
POSITION
Bass+ Treb+
Bass -
Treb-
Turning On
1.
2.
3.
Insert the output plug of the AC power adaptor into the
DC power input of the unit.
Press the power switch on AC power adaptor and the red indicator lights up, the TV/Monitor is in STANDBY mode.
Press the
POWER
button on the unit's control panel or the button on the remote control to turn on.
Turning Off
1.
2.
If you want to turn off the power completely, press the power switch on the AC adaptor.
If you want to turn off temporarily, press the
POWER
button on the unit's control panel or the button on the remote control, the set goes to STANDBY and the indicator turns to red.
Notes:
This TV set can automatically turn off by:
1. When there is no TV signal input for about 15 minutes;
2. Sleep timer;
3. Off timer.
Selecting input signal
1.
2.
3.
Press the
AV
button on the remote control or
SOURCE
button on the set's panel to select input mode. You can select
TV
,
AV
,
S-Video
,
YCbCr
,
YPbPr
or
PC
.
If you want to go to TV mode, press
AV
button repeatedly to select TV mode.
Press
DSP
button, the screen display current mode.
Press
ENTER
to cancel OSD.
16
Channel Preset
CHANNEL SETTING
Auto search
Search
Fine Tune
Change Prog
Current Prog
Change to Prog
Skip
12
15
ON
<V-> or V+> key to change
POWER
CH
VOL
-
MENU
CH
VOL
+
ENTER
C.SYS
ZOOM CLK SLP
AUTO.ADJ
P.M
DSP
1 2 3
4
7
AV
5
8
0
6
9
-
/
--
STILL
OSD
POSITION
Bass+
Treb+
Bass -
Treb-
To enter into CHANNEL SETTING menu
1. Press
MENU
button repeatedly to display
CHANNEL SETTING
menu.
2. Press
CH
or
CH
button to select item.
3. Press
VOL+
or
VOL-
button to confirm or adjust selected item.
Auto Search
Please enter into
CHANNEL SETTING
menu and select
Auto Search
item.
Press
VOL-
or
VOL+
button to start Auto Search and all active programs will be memorised.
During the process of Auto Search, pressing
MENU
button will stop Auto Search.
Auto search.. 10
VHFL
Press <Menu> to escape
Notes:
Please confirm the sound system is correct according to your area before Auto Searching.
Manual Search
Use manual search function if desired channels cannot be preset or if you would like to preset channels to specific position numbers one by one.
Use
0~9
digit buttons or
CH
buttons to select a position number firstly, then enter into
CHANNEL SETTING
menu and select
Search
item. Press
VOL+
button to enter Channel
Search sub-menu, then press
VOL+
or
VOL-
to start manual search.
Press
MENU
button can exit Channel Search sub-menu.
Channel searching.. VHFL 10
Press <V->/<V+> to search channel
Press <P->/<P+> to shift band
Fine Tuning
In area of inferior broadcast conditions where adjustment is necessary for a better picture and sound, use Fine tuning.
Use
0~9
digit buttons or
CH
buttons to select the desired channel, then enter into
CHANNEL SETTING
menu and select
Fine tune
item. Press
VOL+
button to enter into Fine tuning sub-menu, then press and hold
VOL+
or
VOL-
to start Fine tuning.
Fine Tuning.. 10
VHFL
Press <Menu> to change
17
Channel Preset
(continued)
CHANNEL SETTING
Auto search
Search
Fine Tune
Change Prog
Current Prog
Change to Prog
Skip
12
15
ON
<V-> or V+> key to change
POWER
VOL
-
MENU
CH
CH
VOL
+
ENTER
C.SYS
ZOOM CLK SLP
AUTO.ADJ
P.M
DSP
1 2 3
4 5
7
AV
8
0
6
9
-
/
--
STILL
OSD
POSITION
Bass+
Treb+
Bass Treb-
Channel Skipping
You can skip unnecessary channels by using Skip function when you browse program by
CH
buttons.
Use
0~9
digit buttons or
CH
buttons to select a unwanted channel firstly, then enter into
CHANNEL SETTING
menu and select Skip item.
Press
VOL+/-
button to select
ON
to skip this channel. Now this channel will be skipped when you browse channels with
CH
button.
To restore the skipped channel, please select the skipped channel with
0~9
digit buttons and then enter the
CHANNEL SETTING
menu, select
Skip
item and press
VOL+/-
to set
Skip
to
OFF
.
Channel Edit
After Auto Channel Preset, this function is for you to edit the order of programs conveniently according to your favourite.
Please enter into
CHANNEL SETTING
menu and select
Change to Prog
item by
CH
buttons, press
VOL+/-
button to select a target channel to exchange with current channel. Then select
Change
Prog
item and press
VOL+/-
to confirm.
Now the program in current channel number exchanges with the program in the target channel number.
CHANNEL SETTING
Auto search
Search
Fine Tune
Change Prog
Current Prog
Change to Prog
Skip
12
15
ON
<V-> or V+> key to change
18
Channel Select
8
Use 0~9 digit buttons and -/-- button
Use
0~9
digit buttons to select one-digit channel number.
Press -/-- button to display "-".
-
Press 0-9 direct channel selector.
8
POWER
CH
VOL
-
MENU
CH
VOL
+
ENTER
C.SYS
ZOOM CLK SLP
AUTO.ADJ
P.M
DSP
1 2
3
4
7
AV
5
8
0
6
9
-
/
--
STILL
OSD
POSITION
Bass+
Treb+
Bass -
Treb-
To select two-digit channel:
Press -/-- button repeatedly to display "--".
- -
Press 1-9 buttons.
-1
Press 0-9 buttons.
18
To select three-digit channel:
Press -/-- button repeatedly to display "--".
---
Press 1-9 buttons.
--1
Press 0-9 buttons.
-18
Press 0-9 buttons.
180
Press
CH
button, the channel number increases;
Press
CH
button, the channel number decreases.
Use previous channel button
Press this button to switch between the current channel and previous channel.
19
Picture Adjustment
PICTURE SETTING
-
Brightness
+
Contrast
+
Color
+
-
Sharpness
+
Tint
-
+
50
50
50
50
50
<V-> or V+> key to change
POWER
CH
VOL
-
MENU
CH
VOL
+
ENTER
C.SYS
ZOOM CLK SLP
AUTO.ADJ
P.M
DSP
1 2 3
4
7
AV
5
8
0
6
9
-
/
--
STILL
OSD
POSITION
Bass+ Treb+
Bass Treb-
Adjusting picture
1.
Press
MENU
button to display
PICTURE SETTING
menu.
2.
Press
CH
button to select item.
3.
Press
VOL+/-
button to adjust the selected item.
Item
Bright
Contrast
Saturation
Sharpness
Tint*
VOL-
darker weaker paler softer purplish
VOL+
lighter stronger deeper sharper greenish
* Note: The item
Tint
is for NTSC only.
The adjusted settings are stored in the U
ser mode
.
There are three preset picture modes and one User-set picture mode. Press the
P.M
button to select a picture mode according to your favourites.
4
. Press
P.M
button to select picture mode.
You can quickly select picture mode by
P.M
button. There are four picture mode:
Bright
,
Standard
,
Mild
and
User mode
.
Using STILL button
You can still current screen picture by pressing
STILL
button on the remote. Press this button again to resume.
Using AUTO.ADJ button
When wrong picture identification occurs, you can use
AUTO.ADJ
button on the remote to obtain a correct picture.
20
Sound
Bass
Treble
Balance
SOUND
-
-
-
<V-> or V+> key to change
+
+
+
25
25
25
POWER
CH
Adjusting Sound
1.
Press
MENU
button repeatedly to display
SOUND
menu.
2.
Press
CH
button to select item.
3.
Press
VOL+/-
button to adjust the selected item.
Item
Bass
Treble
Balance
VOL-
weaker weaker decreases the right channel
VOL+
stronger stronger decreases the left channel
VOL
-
CH
VOL
+
ENTER
MENU
C.SYS
ZOOM CLK SLP
Notes:
You can quickly adjust Bass and Treble by using
Bass+/Bass-
and
Treb+/Treb-
buttons on the remote.
AUTO.ADJ
P.M
DSP
1 2 3
Adjusting Volume
You can use
VOL+
or
VOL-
button to adjust volume.
Press
VOL+
button, the volume increase;
Press
VOL-
button, the volume decrease.
4 5 6
7
AV
8
0
9
-
/
--
Muting the Sound
If you want to mute the sound, press button on the remote.
To resume the sound, press this button again or you can also press
VOL+
or
VOL-
to resume the sound.
STILL
OSD
POSITION
Bass+
Treb+
Setting Sound mode
Bass -
Treb-
This unit can receive both stereo and bilingual broadcasts Transmitted in either
NICAM or A2 broadcast system.
Color sys
Sound sys
Sound mode
AUTO
BG
AUTO
Press
C.SYS
button on the remote to call up the menu as shown on the above, press
CH
to select
Sound mode
item, then making use of
VOL+/-
to select a desired sound mode. See the following chart for a possible choice.
* When receiving broadcasts transmitted in NICAM system:
* When receiving broadcasts transmitted in A2 system:
Broadcast mode
FM MONO
Choice
MONO
FM STEREO FORCE MONO FM STEREO* (default)
FM BILINGUAL FM A (default) FM B
Broadcast mode
FM/AM MONO
Choice
MONO
FM/AM MONO
& NICAM MONO
FORCE MONO NICAM MONO*(default)
FM/AM MONO
& NICAM STEREO
FORCE MONO NICAM STEREO*(default)
FM/AM MONO
& NICAM BILINGUAL
FORCE MONO NICAM A*(default) NICAM B
Note: "Default" means the choice is a default one. If you do not select other choice, the TV will be in default sound mode. Please according to your local area's broadcasting condition, select your desired sound mode.
Sound mode function is an optional function. It is only available in certain version.
21
System setting
Color sys
Sound sys
Language
OSD position
OSD background
SETUP
AUTO
BG
Eng
Upper Left
Opaque
<V-> or V+> key to change
POWER
CH
VOL
-
MENU
CH
VOL
+
ENTER
C.SYS
ZOOM CLK SLP
AUTO.ADJ
P.M
DSP
/
To enter into SETUP menu
1.
Press
MENU
button repeatedly to display
SETUP
menu.
2.
Press
CH
button to select item.
3.
Press
VOL+
or
VOL-
button to adjust the selected item.
Colour system
From the
SETUP
menu, press
CH
to select
Colour sys
item. Press
VOL-
or
VOL+
button to select a proper colour system according to your area or you can select
AUTO
.
Sound system
From the
SETUP
menu, press
CH
to select
Sound sys
item. Press
VOL-
or
VOL+
button to select a correct sound system.
.
.
Notes:
You can quickly access colour and sound system by using C.SYS
button on the remote.
In some model, the Colour system and Sound system have been preset and cannot be adjusted.
Setting OSD Language
From the
SETUP
menu, press
CH
to select
Language
item. Press
VOL-
or
VOL+
button to select OSD language.
Color sys
Sound sys
Language
OSD position
OSD background
SETUP
AUTO
BG
Eng
Upper Left
Opaque
<V-> or V+> key to change
22
Color sys
Sound sys
Language
OSD position
OSD background
SETUP
AUTO
BG
Eng
Upper Left
Opaque
<V-> or V+> key to change
POWER
CH
VOL
-
MENU
CH
VOL
+
ENTER
C.SYS
ZOOM CLK SLP
AUTO.ADJ
P.M
DSP
1 2
3
4
7
AV
5
8
0
6
9
-
/
--
STILL
OSD
POSITION
Bass+
Treb+
Bass -
Treb-
Setting OSD position
From the SETUP menu, press
CH
to select
OSD position
item.
Press
VOL-
or
VOL+
button to select an
OSD position
in your preference.
Notes:
You can quickly select OSD position by using
OSD position
button on the remote.
Setting OSD Background
From the
SETUP
menu, press
CH
to select
OSD Background
item. Press
VOL-
or
VOL+
button to select
Opaque
or
Translucent
.
Color sys
Sound sys
Language
OSD position
OSD background
SETUP
AUTO
BG
Eng
Upper Left
Opaque
<V-> or V+> key to change
Setting ZOOM mode
This unit allows you to adjust screen aspect ratio in your preference.
You can quickly select screen ratio by using
ZOOM
button on the remote.
Press
ZOOM
button to select a proper screen aspect ratio between
Anamorphic
,
4:3
and
Panorama
in TV, AV, S-Video and YCbCr mode.
Press
ZOOM
button to select a proper screen aspect ratio between
Fill all
and
Normal
in PC and YPbPr mode.
23
Timer
Turn off 0
POWER
CH
VOL
-
MENU
CH
VOL
+
ENTER
C.SYS
ZOOM CLK SLP
AUTO.ADJ
P.M
DSP
1 2
3
4
7
AV
5
8
0
6
9
-
/
--
STILL
OSD
POSITION
Bass+
Treb+
Bass -
Treb-
Use SLP button
Press
SLP
button repeatedly to set sleep time between: 0, 10, 20, 30, 60,
90,120,180,240 minutes. If you select 0 minute, it means the sleep timer function is turned off.
Use CLK button
Press
CLK
button, the
Time
menu appears.
Use
CH
to select hour or minute (the selected item is displayed in white), use
VOL+/-
to set the time.
Current time 0:40
Press
CLK
button twice, the
Turn off
menu appears. Use
VOL+/-
to set the OFF time.
Turn off 0
Press
CLK
button three times to close the menu.
24
Adjustments in YPbPr mode
YPbPr
POWER
CH
VOL
-
MENU
CH
VOL
+
ENTER
C.SYS
ZOOM CLK SLP
AUTO.ADJ
P.M
DSP
1 2 3
4
7
AV
5
8
0
6
9
-
/
--
STILL
OSD
POSITION
Bass+ Treb+
Bass Treb-
To enter into YPbPr mode
Repeatedly press
AV
button on the remote control or
SOURCE
button on the set's panel until the screen display YPbPr, which indicates that the set is in YPbPr mode. Connect the YPbPr terminals to Set Top Box and make sure there is a signal input.
Adjusting picture
In YPbPr mode when there is correct input signal, press
MENU
button and
PICTURE
SETTING
menu appears, Use
CH
to select item and
VOL+/-
to adjust.
Item
Bright
Contrast
Saturation
Sharpness
VOL-
darker weaker paler softer
VOL+
lighter stronger deeper sharper
Brightness
PICTURE SETTING
+
Contrast
+
Saturation
+
Sharpness
+
USER_R
+
USER_G
-
+
USER_B
+
Color Temp 9300K
<V-> or V+> key to change
25
25
25
25
25
25
25
Adjusting Colour temperature
You can select different Colour temperature to obtain correct white. Press
MENU
button, use
CH
to select
Color Temp
item, press the
VOL+/-
to select between
User
,
9300K
,
7300K
,
6500K
.
The
USER_R
,
USER_G
and
USER_B
can not accessed and adjusted unless you set
Color Temp
to
"User"
.
Brightness
PICTURE SETTING
-
+
Contrast
+
Saturation
+
Sharpness
+
USER_R
+
USER_G
+
USER_B
-
+
Color Temp 9300K
<V-> or V+> key to change
25
25
25
25
25
25
25
Adjusting horizontal/vertical position
Press
MENU
button twice and the
PICTURE POSITION
menu appears.
Use
CH / VOL+/-
to adjust.
When a nonstandard signal input to the set and the picture may not be in the screen centre. Now you can adjust its
horizontal
and
vertical
position to display correctly.
Horizontal
PICTURE POSITION
+
Vertical
+
Reset
<V-> or V+> key to change
25
25
25
Adjustments in PC mode
PC
POWER
CH
VOL
-
MENU
CH
VOL
+
ENTER
C.SYS
ZOOM CLK SLP
AUTO.ADJ
P.M
DSP
1 2
3
4
7
AV
5
8
0
6
9
-
/
--
STILL
OSD
POSITION
Bass+
Treb+
Bass -
Treb-
To enter into PC mode
Repeatedly press
AV
button on the remote control or
SOURCE
button on the set's panel until the screen display
PC
, which indicates that the set is in
PC
mode.
PC signal format
Please connect VGA input and be sure that there is VGA input signal. The signal format should be one of the follows:
640 x 480 @60Hz
800 x 600 @60Hz
1024 x 768 @60Hz
1280 x 768 @60Hz
We recommend you to use 1024 x 768 @60Hz (4:3) or 1280 x 768 @ 60 Hz
(16:9) so that the set can obtain the best picture.
Use AUTO.ADJ button
When PC signal format changes or when you switch to PC mode by
AV
button, the set corrects picture automatically including frequency and phase to obtain the best display. During the process of auto correction, all buttons on the remote control and set's panel do not work until this process is finished.
When the set displays some signal formats that are nonstandard and can not adjust by itself to the best displaying status, now you can press
AUTO.ADJ
button to correct the displaying again.
26
Brightness
PICTURE SETTING
+
Contrast
-
+
Phase
+
Frequency
+
USER_R
-
+
USER_G
+
USER_B
Color Temp
-
9300K
+
<V-> or V+> key to change
25
25
25
25
25
25
25
POWER
CH
VOL
-
MENU
CH
VOL
+
ENTER
C.SYS
ZOOM CLK SLP
AUTO.ADJ
P.M
DSP
1 2
3
4
7
AV
5
8
0
6
9
-
/
--
STILL
OSD
POSITION
Bass+
Treb+
Bass -
Treb-
When there is correct input signal, press
MENU
button and
PICTURE
SETTING
menu appears. Use
CH
to select item and
VOL+/-
to adjust
Adjusting brightness and contrast
You can adjust bright and contrast in PC mode and this adjustment does not effect the
brightness
and
contrast
in TV and AV mode.
Adjusting phase and frequency
If you can not obtain the best display after auto correction for many times. Now you can adjust
phase
and
frequency
to obtain the best display.
Brightness
PICTURE SETTING
+
Contrast
+
Phase
+
Frequency
+
USER_R
+
USER_G
-
+
USER_B
+
Color Temp 9300K
<V-> or V+> key to change
25
25
25
25
25
25
25
Adjusting Colour temperature
You can select different Colour temperature to obtain correct white. Press
MENU
button, use
CH
to select
Color Temp
item, press the
VOL+/-
to select between
User
,
9300K
,
7300K
,
6500K
.
The
USER_R
,
USER_G
and
USER_B
can not accessed and adjusted unless you set
Color Temp
to
"User"
.
Brightness
PICTURE SETTING
+
Contrast
+
Phase
+
Frequency
+
USER_R
+
USER_G
+
USER_B
+
Color Temp 9300K
<V-> or V+> key to change
25
25
25
25
25
25
25
27
Trouble shooting
Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing.
Symptoms
Power is not turned on.
Poor colour, poor tint.
Spots appear on the screen.
Stripes appear on the screen.
Double images or "ghosts".
Snowy picture.
TV cabinet creaks.
Remote control does not work.
Control buttons do not work
Check the following items
Be sure the power cord is plugged in.
Contrast, colour, tint are not correctly adjusted.
Possible interferences of automobiles, motorcycle, trolley bus, neon lamps, etc.
Possible interference of electronic interference from another TV set, a computer, an electronics game machine, a broadcast station, etc.
This may be caused by reflections from nearby mountains or buildings.
Check the antenna direction.
It is possible that the aerial "lead-in" is damaged or has come off.
Check the antenna direction.
Even if the picture or the sound is normal, changes in the room temperature sometimes make the TV cabinet expand or contract, making a noise. This does not indicate a malfunction.
The batteries may be worn out.
The batteries may be installed with their polarity reversed.
Unplug the power cord, wait for some seconds.
Then re-plug the power cord and turn on the unit again.
LCD Display panel information
Important Information Regarding Use of Video Games, Computers, Captions or Other Fixed Image Displays.
The extended use of fixed image program material can cause a permanent "shadow image" on the LCD panel.
This background image is viewable on normal programs in the form of a stationary fixed image. This type of irreversible
LCD panel deterioration can be limited by observing the following steps:
A. Reduce the brightness/contrast setting to a minimum viewing level.
B. Do not display the fixed image for extended periods of time.
C. Turn the power off when not in actual use.
Note:
The marking or retained image on the LCD panel resulting from fixed image use is not an operating defect and as such is not covered by Warranty. This product is not designed to display fixed image patterns for extended periods of time.
28
Specifications
Power Supply for AC adaptor:
Power Consumption:
Dimensions (mm):
Weight (kg):
SCREEN:
TV system & channel range.
SYSTEM
PAL-B/G
Colour system:
Sound output:
Accessories
110-240V 50/60Hz
160W
932 (W) x 553 (H) x 245 (D)
16.3
76cm
VHF
2-12
UHF
21-69
PAL BG, NTSC Playback
5W x 2
One remote controller;
One AC adaptor
CATV
X~Z+2, S1~S41
Design and specifications are subject to change without notice.
29
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555 www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
604-L32B13-07A
Ver. 1.0
advertisement
Related manuals
advertisement