- No category
advertisement
Air
Gas Furnaces
R801P (UF/HZ) Series
Rheem Classic
®
Series
Upflow/Horizontal Gas Furnace
R801P- Upflow/Horizontal Series
80% A.F.U.E.†
Input Rates 50-150 kBTU
✝ A.F.U.E. (Annual Fuel Utilization Efficiency) calculated in accordance with
Department of Energy test procedures.
• 80% residential Gas Furnace CSA certified
• 3 way multi poise design UF / HZ
• PlusOne ™ Diagnostics — 7 Segment LED all units
• PlusOne ™ Ignition System – DSI for reliability and longevity
• Heat exchanger is removable for improved serviceability.
Aluminized steel construction provides maximum corrosion resistance and thermal fatigue reliability.
• Solid doors provide quiet operation
• Solid bottom
• Insulated blower compartment
• Low profile 34" cabinet ideal for space constrained
installations
• Blower shelf design – serviceable in all furnace orientations
• Hemmed edges on cabinets and doors
• 1/4 turn door knobs for tool less access
• Integrated Control board features dip switches for easy
system set up
• QR code for quick access to product information from your smart phone or tablet
FORM NO. G11-543 REV. 6
2
Air
Table of Contents
R801P (UF/HZ) Series
TABLE OF CONTENTS
Standard & Optional Equipment ......................................................................3
Model Features/Physical Data & Specifications ................................................4
Model Number Identification ............................................................................5
Dimensional Data ........................................................................................6-7
Blower Performance Data ................................................................................8
Accessories....................................................................................................9
Limited Warranty ..........................................................................................10
PATENTED HEAT EXCHANGER
Air
Standard & Optional Equipment
R801P (UF/HZ) Series
DRAFT INDUCER MOTOR
IN-SHOT BURNERS
DIRECT SPARK IGNITOR
INTEGRATED
FURNACE
CONTROL
STANDARD EQUIPMENT
Completely assembled and wired; induced draft; pressure switch; redundant main gas control; blower compartment door safety switch; solid state time on/time off blower control; limit control; manual shutoff valve, pressure regulator for natural and L.P. (propane) gas; transformer; direct drive multi-speed blower motor. Furnaces are equipped with cooling/heating relay and transformer (40VA) ready for air conditioning applications. (Please note: a thermostat is not included as standard equipment.) Flame sensor diagnostics.
OPTIONAL EQUIPMENT
Side and bottom filter frame assembly. Return air cabinet for all sizes.
NOTE: Furnace is not listed for use with fuels other than natural or L.P.
(propane) gas.
The complete terms of limited and other warranties are available at our sales office, or through local installer.
All models can be converted by a qualified Rheem distributor or local service dealer to use L.P. (propane) gas without changing burners.
Factory approved kits must be used to convert from natural to L.P.
(propane) gas and may be ordered as optional accessories from a
Rheem parts distributor.
For L.P. (propane) operation, refer to Conversion Kit Index Form.
NOTE: For natural and L.P. (propane) gas models, direct spark ignition is 100% safety lockout type.
WARNING
THIS FURNACE IS NOT APPROVED
OR RECOMMENDED
FOR USE IN MOBILE HOMES
3
Air
Model Features/Physical Data & Specifications
R801P (UF/HZ) Series
Model Features
• 80% residential Gas Furnace CSA certified
• 3 way multi poise design UF / HZ
• PlusOne ™ Diagnostics — 7 Segment LED all units
• PlusOne ™ Ignition System – DSI for reliability and longevity
• Heat exchanger is removable for improved serviceability.
Aluminized steel construction provides maximum corrosion resistance and thermal fatigue reliability.
• Solid doors provide quiet operation
• Solid bottom
• Insulated blower compartment
• Low profile 34" cabinet ideal for space constrained
installations
• Blower shelf design serviceable in all furnace orientations
• Hemmed edges on cabinets and doors
• 1/4 turn door knobs for tool less access
• Integrated Controls board features dip switches for easy
system set up
• QR code for quick access to product information from your smart phone or tablet
Physical Data and Specifications
MODEL NUMBERS R801P SERIES R801PA050314M*A R801PA075317M*A R801PA075417M*A R801PA100417M*A R801PA100521M*A R801PA125524M*A R801PA150524M*A
Input-BTU/Hr ➁
Heating Capacity BTU/Hr ➀
Heat Ext. Static Pressure
50,000
40,000
.18
75,000
61,000
.20
75,000
60,000
.20
100,000
80,000
.28
100,000
80,000
.28
125,000
100,000
.28
150,000
120,000
.28
Blower (D x W)
Motor H.P.–Speed–Type
Min. Circuit Ampacity
Min. Overload Protection Device
Max. Overload Protection Device
Heating Speed
Cooling Speed
Cooling CFM @ 70" W.C. E.S.P.
Max. E.S.P. (In. W.C.)
11 x 6
1/3-4-PSC
9
15
15
Med-Low
High
1164
0.8
11 x 7
1/2-4-PSC
10
15
15
Med-High
Low
1198
0.8
11 x 7
1/2-4-PSC
11
15
15
Med-High
Med-Low
1657
0.8
11 x 7
1 /
2
-4-PSC
11
15
15
Med-High
Med-Low
1582
0.8
11 x 10
1/2-4-PSC
11
15
15
Med-Low
High
1807
0.8
11 x 10
3/4-4-PSC
12
15
15
Med-High
High
1742
0.8
11 x 10
3/4-4-PSC
13
15
20
Med-High
High
1916
0.8
Temperature Rise Range °F
Max. Outlet Air Temp. °F
Approx. Shipping Weight (Lbs.)
25-55
155
110
25-55
155
110
25-55
155
125
AFUE ➀ 80.0% 80.0% 80.0%
NOTES: All models are 115V, 60HZ, 1 Ph. Gas connection size for all models is
➀ In accordance with D.O.E. test procedures.
➁ See Conversion Kit Index Form for high altitude derate.
* S = Standard, X = Low Nox
1 /
2
" N.P.T.
35-65
165
110
80.0%
35-65
180
140
80.0%
35-65
165
150
80.0%
45-75
190
160
80.0%
4
Air
Model Number Identification
R801P (UF/HZ) Series
Model Number Identification
R 80 1 P A
Rheem 80 =
80% AFUE
1 = Single Stage P = PSC Motor w/Premium
Cabinet
Design Series
A = 1st Design
075
Input
BTU/HR [kW]
050 = 50,000
075 = 75,000
100 = 100,000
125 = 125,000
150 = 150,000
4
3 = Up to
3 Ton
4 = 2 1 /
2 to
4 Ton
5 = 3 1 /
2 to
5 Ton
17 M S A
Cabinet
Width
14 = 14" .0
17 = 17.5"
21 = 21" .0
24 = 24.5"
M = Multi X = Low NO x
S = Standard
Revision-
Marketing
(A – First Time
Release)
5
Air
Dimensional Data
R801P (UF/HZ) Series
Upflow Application
Dimensional Data: Upflow Model
MODEL
R801P-
A B C D E F LEFT
SIDE
MINIMUM CLEARANCE (IN.)
RIGHT
SIDE
4 ➁
BACK
0
TOP
1
FRONT
3
VENT
050 14 1 /
2
12 27 /
32
10 5 /
8
➀
11 1 /
2
1 7 /
8
0 6 ➂
075/
100417
17 1 /
2
16 11 /
32
12 3 /
8
➀
15 1 /
2
2 1 /
2
0 3
➁
0 1 3 6
➂
100521
125
150
21
24
24
1
1
1 /
/
/
2
2
2
19
23
23
27
11
11 /
/
/
32
32
32
14
15
15
1
7
7 /
/
/
8
8
8
➀
➀
➀
18
22
22
1
1
1 /
/
/
2
2
2
2
2
2
1
1
1 /
/
/
2
2
2
0
0
0
0
0
0
0
0
0
1
1
1
3
3
3
6
➂
6 ➂
6 ➂
NOTES:
➀ May require a 3" to 4" or 3" to 5" adapter.
➁ May be 0" with type B vent.
➂ May be 1" with type B vent.
Furnaces must be vented in accordance with the National Fuel Gas Code, ANSI Z223.1 and/or Can/CGA-B149 Installation Codes and in accordance with local codes.
SHIP
WGTS.
(LBS.)
85
105
120
140
150 .
6
Horizontal Application
Air
Dimensional Data
R801P (UF/HZ) Series
WARNING
THIS FURNACE IS NOT APPROVED
OR RECOMMENDED FOR INSTALLATION
ON ITS BACK, WITH ACCESS DOORS
FACING UPWARDS.
Dimensional Data: Horizontal Model
MODEL
R801P-
050 14
A
1 /
2
12
B
27 /
32
10
C
5 /
8
D
➀
11
E
1 /
2
1 7
F
/
8
SUPPLY
AIR SIDE
0
MINIMUM CLEARANCE (IN.)
RETURN
AIR SIDE
4 ➁
BACK
0
TOP
1
FRONT
3
VENT
6 ➂
075/
100417
17 1 /
2
16 11 /
32
12 3 /
8
➀
15 1 /
2
2 1 /
2
0 3
➁
0 1 3 6
➂
100521
125
150
21
24
24
1
1
1 /
/
/
2
2
2
19
23
23
27
11
11 /
/
/
32
32
32
14
15
15
1
7
7 /
/
/
8
8
8
➀
➀
➀
18
22
22
1
1
1 /
/
/
2
2
2
2
2
2
1
1
1 /
/
/
2
2
2
0
0
0
0
0
0
0
0
0
1
1
1
3
3
3
6
➂
6 ➂
6 ➂
NOTES:
➀ May require a 3" to 4" or 3" to 5" adapter.
➁ May be 0" with type B vent.
➂ May be 1" with type B vent.
Furnaces must be vented in accordance with the National Fuel Gas Code, ANSI Z223.1 and/or Can/CGA-B149 Installation Codes and in accordance with local codes.
SHIP
WGTS.
(LBS.)
85
105
120
140
150 .
7
Air
Blower Performance Data
R801P (UF/HZ) Series
Blower Performance Data
MODEL
MOTOR H.P. [W]
BLOWER SIZE
IN
SPEED
TAP
(-)801PA050314M*A
(-)801PA075317M*A
(-)801PA075417M*A
(-)801PA100417M*A
(-)801PA100521M*A
(-)801PA125524M*A
(-)801PA150524M*A
1/3
11 x 6
1/2
11 x 7
1/2
11 x 7
1/2
11 x 7
1/2
11 x 10
3/4
11 x 10
3/4
11 x 10
Low
Med. Lo
Med. Hi
High
Low
Med. Lo
Med. Hi
High
Low
Med. Lo
Med. Hi
High
Low
Med. Lo
Med. Hi
High
Low
Med. Lo
Med. Hi
High
Low
Med. Lo
Med. Hi
High
Low
Med. Lo
Med. Hi
High
Note: Bold data is factory heating tap.
Table represents blower performance data WITHOUT filters.
1358
1541
1799
2015
1411
1606
1889
2178
1211
1305
1520
1874
1209
1438
1902
2071
0.1
823
1030
1129
1361
1008
1215
1421
1668
1229
1308
1553
1969
1354
1517
1774
1989
1395
1579
1891
2160
1183
1261
1498
1810
1182
1420
1883
2037
0.2
803
1018
1132
1353
977
1181
1408
1648
1200
1267
1542
1924
1301
1453
1712
1902
1334
1537
1828
2067
1116
1185
1427
1686
1112
1350
1817
1962
0.4
732
976
1087
1297
893
1098
1326
1580
1155
1233
1491
1840
CFM AIR DELIVERY
EXTERNAL STATIC PRESSURE INCHES WATER COLUMN
1331
1476
1746
1929
1370
1569
1849
2105
1148
1225
1464
1767
1131
1386
1844
2001
0.3
787
1006
1112
1331
935
1133
1372
1633
1181
1266
1516
1893
1250
1416
1691
1862
1310
1499
1764
2024
1077
1157
1387
1678
1051
1320
1753
1905
0.5
718
929
1054
1264
854
1065
1299
1545
1120
1204
1451
1803
1224
1371
1629
1815
1252
1468
1717
1976
1040
1113
1340
1650
976
1293
1700
1856
0.6
691
897
1028
1232
823
1023
1247
1481
1078
1176
1417
1728
1154
1339
1554
1742
1220
1407
1659
1916
984
1068
1292
1582
929
1248
1636
1807
0.7
651
850
971
1164
777
975
1198
1442
1013
1113
1358
1657
1089
1277
1495
1665
1150
1346
1609
1832
953
1012
1226
1497
867
1186
1547
1709
0.8
593
808
919
1117
735
937
1152
1373
970
1062
1306
1570
8
SIDE RETURN FILTER RACK: RXGF-CD
BOTTOM RETURN FILTER RACK FOR
UPFLOW APPLICATION: RXGF-CB
MODEL
R801PA050
R801PA075/
R801PA100417
R801PA100521
R801PA125
R801PA150
FILTER RACK FILTER SIZES* INCHES
RXGF-CB
(UPFLOW/
HORIZONTAL)
RXGF-CD
(UPFLOW)
SIDE RETURN
12 1 /
4 x 25 15 3 /
4 x 25
15
19
3
1 /
/
4
4 x 25 x 25
22 3 /
4 x 25
22 3 /
4 x 25
15
15
3
3 /
/
4
4 x 25 x 25
15 3 /
4 x 25
15 3 /
4 x 25
INDOOR COIL CASINGS
MODEL
NUMBER
RXBC-D14AI
RXBC-D17AI
RXBC-D21AI
RXBC-D21BI
RXBC-D24AI
4" FLUE ADAPTER: RXGW-C01
Air
Accessories
R801P (UF/HZ) Series
WARNING: IMPORTANT NOTICE
A SOLID METAL BASE PLATE (SEE TABLE) MUST BE IN PLACE WHEN THE
FURNACE IS INSTALLED WITH SIDE AIR RETURN DUCTS. FAILURE TO
INSTALL A BASE PLATE COULD CAUSE PRODUCTS OF COMBUSTION TO
BE CIRCULATED INTO THE LIVING SPACE AND CREATE POTENTIALLY
HAZARDOUS CONDITIONS.
FURNACE SOLID BASE BASE
WIDTH BOTTOM PLATE NO. PLATE SIZE
IN. KIT NO. IN.
14 1 /
2
RXGB-D14 AE-61874-01 11 5 /
8 x 23 9 /
16
17 1 / 2 RXGB-D17 AE-61874-02 15 1 / 8 x 23 9 / 16
21 1 / 2 RXGB-D21 AE-61874-03 18 5 / 8 x 23 9 / 16
24 1 / 2 RXGB-D24 AE-61874-04 25 5 / 8 x 23 9 / 16
FOR HIGH ALTITUDES:
OPTION CODE FOR HIGH ALTITUDE: U.S. & Canada
None required for high altitudes.
HIGH ALTITUDE CONVERSION KITS: U.S. & Canada
None required for high altitudes.
80+ HIGH ALTITUDE INSTRUCTIONS
CAUTION: Always follow National Fuel Gas Code (NFGC) guidelines when converting for high altitudes.
High altitude option codes are not required for these models.
However, the burner orifice size needs to be recalculated and verified at elevations above 2000 ft. See Installation Instructions for more information.
NOTE: For Canadian installations only, an optional derate (manifold gas pressure reduction) method may be used to adjust the furnace for altitude. See Installation Instructions for more information. This optional method may NOT be used for U.S.
installations.
9
Air
Limited Warranty
R801P (UF/HZ) Series
GENERAL TERMS OF LIMITED WARRANTY*
Rheem will furnish a replacement for any part of this product which fails in normal use and service within the applicable period stated, in accordance with the terms of the limited
warranty.
*For complete details of the Limited and Conditional Warranties, including applicable terms and conditions, contact your local contractor or the Manufacturer for a copy of the product warranty certificate.
Conditional Parts* (Registration Required) ......Ten (10) Years
Heat Exchanger ......................................Twenty (20) Years
10
Air
Notes
R801P (UF/HZ) Series
11
The new degree of comfort.
™
In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.
Rheem Heating, Cooling & Water Heating • P.O. Box 17010
Fort Smith, Arkansas 72917 • www.rheem.com
Rheem Canada Ltd./Ltée • 125 Edgeware Road, Unit 1
Brampton, Ontario • L6Y 0P5
PRINTED IN U.S.A. 3/17 QG FORM NO. G11-543 REV. 6
advertisement
Related manuals
advertisement