- Vehicles & accessories
- Motor vehicle electronics
- Car audio amplifiers
- PowerBass
- Xtreme XL
- User's manual
PowerBass Xtreme XL User's Manual
Add to my manuals
8 Pages
PowerBass XL amplifiers boast low profile, high density extruded aluminum heatsinks for maximum heat dissipation. Custom tooled brass terminal speaker and power terminal blocks ensure excellent conductivity. With low level inputs and outputs that send a full range signal to other amplifiers, these devices excel in multiple amplifier setups.
advertisement
CAT-X2008 $2.95
revised 0131
PowerBass Amplifiers and Speakers are manufactured under an
ISO9001:2000 quality System
Santoprene® is a registered trademark of ExxonMobil Chemcial Co.
Ferrofluid® is a registered trademark of Ferro-Tec International
Kevlar® and Kapton® are registered trademarks of E.I. du Pont de Nemours and Company www.powerbassusa.com
PowerBass ® USA, Inc.
13936 Mountain Avenue • Chino, CA 91710 tel (909) 993-5399 • fax (909) 993-5393 • www.powerbassusa.com
Due to continuing product improvement, features and specifications are subject to change without notice.
©2008 PowerBass USA, Inc. All Rights Reserved.
coaxials components subwoofers amplifiers capacitors Processors MARINE wiring kits
The PowerBass Xtreme Experience
Like our namesake, we engineer our entire product line for Extreme enthusiasts and audio professionals alike. to design and build the most extreme audio products that are limited only to the imagination.
At PowerBass we eat, breathe and live by the design and engineering of our products. Having a complete staff of electrical, acoustical and mechanical engineers gives us the capability
By controlling design and manufacturing, hand picking components, and thinking outside of the box,
PowerBass is able to produce car audio products that push the envelope without breaking the bank. To prove it, we offer a 3-year
Xtended Warranty* on all of our
PowerBass Xtreme speakers!
At PowerBass, we don't want you to just listen to your music; we want your music to be part of the experience, the PowerBass Xtreme
Experience.
Table of Contents
3XL Class D Subwoofer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2XL Subwoofer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
XL Subwoofer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
XA Amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3XL Coaxials . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2XL Coaxials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2XL & 3XL Components & Tweeters. . . . . . . . . . . . . . . . . . . . . . . .
4XL Competition Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11
12
13
14
Marine Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3 year
Xtended Warranty
*
*Ask your Authorized Powerbass Dealer for Xtended Warranty details.
04
06
07
08
10
04
3XL
Subwoofer
The 3XL range of subwoofers is innovative in that it is designed to work with the new generation Class "D" amplifiers. Class "D" amplifiers heat up the woofers voice coil two to three times hotter and faster than a conventional class A/B amplifier. This calls for Xtreme measures and special parts to classify these as a true "Class D Subwoofer."
But hey, this is PowerBass. We have it under control.
Custom CNC Cast Aluminum Basket heavy duty design incorporating motor assembly cooling vents
Proprietary Non-pressed Paper Cone Body With Xpanded Zirconium Coated Poly Truss is every thing that you need to produce the deepest and loudest bass known to man
Dual 1-ohm Voice Coils specifically built to handle all of your Class D needs
3" HD BASV Hybrid Voice Coil Formers for optimum performance and cooling
Industrial Assembly Glues are used to handle the Extreme heat that a Class D amplifier produces that would normally annihilate a common subwoofer
First, we use industrial assembly glues that handle this excessive heat that would normally tear a conventional speaker apart.
Then there is perimeter venting to allow air movement over the voice coil built into our custom CNC cut, cast aluminum basket.
The basket works as a strong support for the moving mass of the proprietary non-pressed paper cone body that holds the zirconium- coated poly truss cone that displays the raised PBX logo.
CNC Billet Aluminum Trim Ring
Ultra High Roll Treated Foam Surround that increases the cone area for higher output along with linear cone stability throughout the subwoofers 3 inches of linear travel
XTRA XTRA XTRA Large Motor Assemblies
Pro-lock Input Terminals clamps surround to basket for increased durability to handle the high voltage input into these beasts to ensure optimal current transfer from the amplifier to the woofer
The 3XL woofers all feature 3" HD BASV voice coil formers that are anodized black to help dissipate heat. To allow full movement of the cone, we utilize an ultra high roll treated foam surround that increases the cone area for higher output along with linear cone stability throughout the subwoofers 3" of linear travel.
To make sure high voltages from the amplifier reach the speaker, we use
Pro-Lock terminals and Xtra large motor assemblies to handle the high power these speakers are designed for.
3XL woofers are available in 10", 12", and
15" sizes, feature dual 1-ohm voice coils, and are designed to work best in ported enclosures for maximum SPL output.
D E S I G N E D F O R
PORTED
ENCLOSURES
FOR MAXIMUM SPL OUTPUT
Class D subwoofer
3XL series
1o”, 12”, 15” 3XL-15D
3XL-12D
3XL-10D size
15"
12"
10" power handling
(rms/peak)
1000 / 2000 watts
850/ 1700watts
750/ 1500watts nominal impedance
Dual 1-ohm
Dual 1-ohm
Dual 1-ohm voice coil size
3"
3"
3" frequency response
24Hz-400Hz
31Hz-450Hz
39Hz-500Hz sensitivity
(1w / 1m)
93 dB
91 dB
89 dB motor structure
542 oz
542 oz
443 oz mounting depth
9.2"
7.75"
6.0"
05
06
2XL
Subwoofer
The 2XL woofer line is designed for the audiophile looking for a subwoofer that works in a small sealed enclosure and demands tight accurate bass reproduction.
This woofer receives the full treatment, including perimeter venting built into the custom CNC cast aluminum basket. A proprietary COC/graphite cone that is injected with nitrogen bubbles to give a very rigid platform for the subwoofer to work in small sealed enclosures with very high power handling capabilities.
Our high roll Santoprene surround increases the cone area and handles the moving mass of the cone and 2.5” KSV voice coil.
Xtra large motor structures for high power handling and Pro-lock terminals insure optimal current transfer from the amplifier to the woofer for the loudest SPL possible.
Available in 10”, 12”, and 15” sizes with dual 4-ohm voice coils for multiple system applications.
D E S I G N E D F O R
SEALED
ENCLOSURES
FOR MAXIMUM SPL OUTPUT
2XL series
1o”, 12”, 15” 2XL-15D
2XL-12D
2XL-10D size
15"
12"
10" power handling
(rms/peak)
500 / 1000 watts
450 / 900 watts
400 / 800 watts nominal impedance
Dual 4-ohm
Dual 4-ohm
Dual 4-ohm voice coil size
2.5"
2.5"
2.5" frequency response
23Hz-400Hz
26Hz-450Hz
31Hz-500Hz sensitivity
(1w / 1m)
93 dB
92 dB
91 dB motor structure
302 oz
270 oz
254 oz mounting depth
8.6"
6.75"
6.5"
Custom CNC Cut Cast Aluminum Basket heavy duty design incorporating motor assembly cooling vents
Proprietary COC/Graphite Cone injected with Nitrogen bubbles to give a very rigid platform suitable for extremely small enclosures and very high power handling capabilities
Dual 4-ohm Voice Coils for the most popular bass applications
2.5" KSV Voice Coil Formers for optimum performance and cooling
CNC Billet Aluminum Trim Ring clamps surround to basket for increased durability
High Roll Santoprene ® Surround that increases the cone area for higher output along with linear cone stability
XTRA XTRA Large Motor Structures for high power handling and more SPL
Pro-lock Input Terminals to ensure optimal current transfer from the amplifier to the woofer
Designed To Work Optimally In A Sealed Enclosure for tight, unsurpassed bass that brings all types of music to life
Rigid Tooled Basket With A Stainless Steel Finish
Black Zirconium Cone for the best, distortion free bass reproduction
Dual 4-ohm Voice Coils for the most popular bass applications
High Roll Santoprene ® Surround that increases the cone area for higher output along with linear cone stability
XTRA Large Motor Structures for high power handling and more SPL
Chrome Push Input Terminals to ensure the best current transfer from the amplifier to the woofer
Designed To Work Optimally In Sealed Or
Ported Enclosures for multiple applications
XL
Subwoofer
PowerBass 2XL subwoofers were designed to be bulletproof-reliable with all of the features of the rest of the Extreme range, but in a more affordable package. It boasts a custom steel basket with a stainless finish and the distinctive X logo. Perimeter venting is built into the basket, and a large motor structure combines to form a strong base for any high output system. By utilizing aerospace materials such as a black zirconium cone for the best distortion-free bass reproduction, and high roll Santoprene surrounds that increases the cone area, higher output along with linear cone stability are achieved. Finally, to make sure the power gets to the subwoofer, we use chrome push terminals for maximum current transfer.
The XL subwoofers are designed to offer amazingly low bass in small sealed enclosures or ported enclosures and are available in 10”, 12, 15” to include dual
4-ohm voice coils for multiple system applications.
MULTI
E N C L O S U R E
C O M P A T I B I T Y
XL series
1o”, 12”, 15” XL-15D
XL-12D
XL-10D size
15"
12"
10" power handling
(rms/peak)
400 / 800 watts
350 / 700 watts
300 / 600 watts nominal impedance
Dual 4-ohm
Dual 4-ohm
Dual 4-ohm voice coil size
2.5"
2"
2" frequency response
26Hz-400Hz
26Hz-450Hz
35Hz-500Hz sensitivity
(1w / 1m)
94 dB
92 dB
91 dB motor structure
220 oz
148 oz
140 oz mounting depth
6.6"
5.5"
5.25"
07
XA
amplifiers
A/B Class Amplifiers
If you’re looking for raw power, then look no further. PowerBass’ mission has been to develop and refine audio products that satisfy the most demanding enthusiasts. The XA
PowerBass amplifiers deliver pure, clean power.
Full Range A/B AMPLIFIERS
Low Profile Finned Heatsink High density extruded aluminum heatsink for maximum heat dissipation and bulletproof reliability.
PWM MOSFET Power Supply PWM (Pulse Width Modulated) switching Power Supply combined with
MOSFET transistors for increased output voltage.
The XA amplifier starts with a low profile, high density extruded aluminum heatsink for maximum heat dissipation. We then add custom tooled brass terminal speaker and power terminal blocks for excellent conductivity, and then offer low level inputs
AND outputs that send a full range signal on to additional amplifiers for easy system design.
Variable Electronic Crossover Overlapping LPF (Low Pass Filter) variable from 40Hz~500Hz and HPF
(High Pass Filter) variable from 20Hz~1.5KHz. Plus Built-in Bass EQ @ 45Hz.
Custom Tooled Speaker And Power Inputs Solid brass tooled terminal blocks with Nickel finish to ensure a quality electronic connection alowing maximum signal transfer.
Low Level Inputs And Outputs Balanced RCA style connections allow you to daisy chain amplifiers together for multiple hookups.
Inside the amplifiers, we use a PWM (Pulse
Width Modulated) switching power supply and
MOSFET transistors for increased output voltage. To make sure that the proper signal gets to your speakers, we have an adjustable 12 dB/octave high pass crossover with a range 50
– 250Hz and a low pass crossover with a range of 40 – 400 Hz to allow for multiple applications. To get that low bass bump, we equip the XA amplifiers with an EQ with 18dB of boost at 45 Hz. As you will find out, the XA amp will provide your PowerBass speakers with plenty of clean power.
The D Class range of XA amplifiers are designed to run subwoofers with less power demand on your vehicle’s electrical system.
The XA amplifiers come fully equipped with features to run your subwoofers no matter what size or the type of music you listen to.
First a 24-dB/octave crossover to cut the high frequencies out of your subs and concentrate all of the amplifiers into the subwoofers intended frequency range. In addition to cutting high frequencies, we also include a subsonic filter to cut frequencies too low to be heard and waste amplifier power. The included remote bass control allows control of the volume of the subwoofers when you need to increase the output of the subwoofers. For
SPL applications, the XA amplifiers can be strapped together for serious power to individual voice coils - or just because.
D Class AMPLIFIERS
Remote Bass Control (Included) Wired dash mounted remote allows you to fine tune the amp's special BASS EQ circuitry. Variable from 0~18dB.
Strap Two Amps Together For Double Power Output Allows two of the same model amplifier to be combined in a Master/Slave configuration to function as one for increased power.
Oversized Power And Ground Inputs Heavy duty 1/0-Guage CNC machined high efficiency Power and Ground
Inputs for maximum power transfer.
24 dB/Octave Electronic Crossover Variable LPF (Low Pass Frequency) from 20Hz~1.5KHz plus a separate variable SubSonic filter for maximum system flexibilty.
Self-diagnostic Protection Circuitry 4-way protection circuitry guards against Short Circuit/Thermal
Overheating/Impedance Overload and DC Output.
08
Channels
Output Power (14.4V 4 ohms Stereo)
Output Power (14.4V 2 ohms Stereo)
Output Power (14.4V 4 ohms Bridged)
Frequency Response
Total Harmonic Distortion
S/N Ratio
Input Sensitivity
Dimensions (W x H x L)
XA 485
4
4 x 85 watts
4 x 110 watts
2 x 210 watts
15Hz~40,000Hz
<0.05%
>80dB
250mV - 6.0V
10.51" x 2.56" x 13.78"
XA 2150
2
2 x 150 watts
2 x 230 watts
1 x 460 watts
15Hz~40,000Hz
<0.05%
>80dB
250mV - 6.0V
10.51" x 2.56" x 13.78"
Channels (mono)
Output Power (14.4V) @ 1ohm
Output Power (14.4V) @ 2 ohm
Output Power (14.4V) @ 4 ohm
Strapped Output Power @ 2 ohms
Frequency Response
Total Harmonic Distortion
S/N Ratio
Input Sensitivity
Dimensions (W x H x L)
XA 900D
1
900 watts
600 watts
300 watts
1700 watts
10Hz~300Hz
<0.1%
90dB
200mV - 6.0V
10.51" x 2.56" 11.00"
XA 1500D
1
1500 watts
1000 watts
500 watts
2500 watts
10Hz~300Hz
<0.1%
90dB
200mV - 6.0V
10.51" x 2.56" 14.17"
XA 3000D
1
3000 watts
2000 watts
1000 watts
6200 watts
10Hz~300Hz
<0.1%
90dB
200mV - 6.0V
10.51" x 2.56" 20.87"
XA 4000D
1
4000 watts
2700 watts
1350 watts
8000 watts
10Hz~300Hz
<0.1%
90dB
200mV - 6.0V
10.51" x 2.56" 25.50"
09
10
3XL-6902
3XL-6802
3XL-6502
3XL-5202
Coaxials
3XL
Coaxials
Pivot Point 1” Titanium Dome Swivel Tweeter for the ultimate in clarity and high frequency reproduction
Hybrid Kevlar ® /Glass fiber Cone provides better transient response
Dual Gap Technology for virtually distortion free sound reproduction
Neodymium Magnet Structure for accurate and quick response
Enhanced Internal 12dB Crossover audiophile quality components for smooth frequency transition
3-ohm System Impedance for more efficient use of amplifier power
Rigid Tooled Basket with Stainless Steel Finish for precise motor alignment
PBX Tuner Inspired Grill insures your speaker looks and sounds its best
3XL-6902
3XL-6802
3XL-6502
3XL-5202
Size
6x9"
6x8"
6.5"
5.25"
Power Handling
(RMS/Peak)
130 / 260 watts
100 / 300 watts
90 / 180 watts
80 / 160 watts
Nominal
Impedance
3-ohm
3-ohm
3-ohm
3-ohm
Frequency
Response
40Hz-22kHz
52Hz-22kHz
60Hz-22kHz
64Hz-22kHz
Sensitivity
(1W / 1M)
93 dB
92 dB
90 dB
90 dB
Mounting
Depth
3.6"
3.0"
2.9"
2.6"
Now armed with Titanium alloy tweeters, Dual Gap technology, Neodymium magnets, proprietary heat sink motor assembly and 50% larger voice coils, our new 3XL Series of coaxial speakers are ready to go toe to toe with the best of the best.
One of the ways to sound the best is to use the highest quality cone materials available. The highs are handled by an improved lower profile, pivoting tweeter now constructed from a titanium alloy for the ultimate in detailed fidelity. Our 2nd generation
Hybrid Kevlar/Glass Fiber midrange cones are lighter and more efficient, still giving you accurate sound reproduction while offering even tighter, controlled mid-bass.
To insure a seamless transition between the highs and lows, each speaker is outfitted with its own internal audiophile grade 12dB crossover circuitry combined with chrome plated push terminals for easy connection and exceptional sound.
Other features include our innovative 3-0 impedance system, Butyl rubber surrounds, stamped steel baskets with a stainless steel finish, custom finned heat sink and tuner inspired grills.
The new PowerBass 3XL coaxials, it’s time for the competition to play catch up!
2XL
Coaxials
Crystal clear sound quality with warm tones is what we demanded from our new 2XL range of coaxial speakers and they will not disappoint! If you need a high quality speaker yet have a vehicle with special mounting requirements, this is the series for you. Whether you need a 4” or a
6x8” coaxial, we can fit most needs. We even offer a 6.5” thin mount speaker where you want all the bass but not much space.
The 2XL series also uses the 3-0 system, 3-ohm impedance for more efficient use of your amplifier power. With Butyl rubber surrounds, you get high efficiency and lower bass response with lower distortion. Our new low profile pivoting silk dome tweeter and unique 50/50 wool blend midrange cone team up to give you warm accurate sound that you can listen to for hours without fatigue.
2XL-6902
2XL-6802
2XL-6705
2XL-6502
2XL-650T
2XL-5202
2XL-4602
2XL-4002
Size
6x9"
6x8"
6.75"
6.5"
6.5" thin
5.25"
4x6"
4"
Power Handling
(RMS/Peak)
100 / 200 watts
75 / 150 watts
75 / 150 watts
75 / 150 watts
60 / 120 watts
60 / 120 watts
50 / 100 watts
50 / 100 watts
Nominal
Impedance
3-ohm
3-ohm
3-ohm
3-ohm
3-ohm
3-ohm
3-ohm
3-ohm
Frequency
Response
40Hz-21kHz
53Hz-21kHz
60Hz-21kHz
59Hz-21kHz
60Hz-21kHz
62Hz-20kHz
68Hz-20kHz
68Hz-20kHz
Sensitivity
(1W / 1M)
92 dB
91 dB
89 dB
90 dB
89 dB
89 dB
88 dB
88 dB
Magnet
Size
30 oz
14 oz
12 oz
14 oz
12 oz
12 oz
10 oz
10 oz
Mounting
Depth
3.3"
2.4"
2.15"
2.4"
2.15"
2.2"
1.95"
2.1"
Pivot Point 1” Silk Dome Swivel Tweeter for smoother, clearer sound
50/50 Wool Blend Cone half paper, half wool delivers a more natural sound
Butyl Rubber Surround provides years of accuracy and quality sound
Heavy Motor Structure with protective boot for increased power handling
3-ohm System Impedance for more efficient use of amplifier power
Rigid Tooled Basket with Stainless Steel Finish for precise motor alignment
PBX Tuner Inspired Grill insures your speaker looks and sounds its best
2XL-6902
2XL-6802
2XL-6705
2XL-6502
2XL-650T
2XL-5202
2XL-4602
2XL-4002
11
Components
We gave our engineers the task of creating
THE BEST sounding component speaker system and here is the result. Our latest
3XL Series component speakers deliver increased output without any measurable distortion thanks to our new Dual Gap technology. The spun aluminum phase plug can be removed and replaced by the tweeter assembly, thus creating the ultimate coaxial speaker—talk about flexibility!
The innovations don’t stop there, the engineers came up with a second generation Hybrid Kevlar/Glass fiber cone material, lighter and more efficient then before while still tough enough to take on the rigors of the road. We added a cast basket, neodymium magnet and a 1.5” voice coil to give you the ability to pound out more bass then ever before while looking sharp in the process! Available in both 6.5” and 5.25” configurations, the new 3XL Components are sure to stand out from the crowd.
3XL-60C
3XL-50C
Size
6.5"
5.25"
Power Handling
(RMS/Peak)
90/ 180 watts
80 / 160 watts
3XL
Components
Pivot Point 1” Titanium Dome Tweeter with mounting kit provides the ultimate clarity and high frequency reproduction
Convertible Tweeter Assembly for coaxial or component style mounting
Dual Gap Technology for virtually distortion free sound reproduction
Neodymium Magnet Structure for accurate and quick cone response
Hybrid Kevlar®/Glass Fiber Cone improved for better transient response
Cast Aluminum Basket for lower resonance and reduced sound coloration
3-ohm System Impedance for more efficient use of amplifier power
Computer Enhanced External 12dB 2-way Crossover Network for smooth transitions between woofer and tweeter
Nominal
Impedance
3-ohm
3-ohm
Frequency
Response
59Hz-22kHz
63Hz-22kHz
Sensitivity
(1W / 1M)
91 dB
91 dB
Mounting
Depth
3.2"
2.7"
2XL-60C
2XL-50C
6.5"
5.25"
90 / 180 watts
70 / 140 watts
3-ohm
3-ohm
59Hz-20kHz
62Hz-20kHz
91 dB
90 dB
2.4"
2.2"
3XL-60C
2XL-50C
2XL
Components
Component or conventional coax? Now you can decide! Our new 2XL Series can make the switch from a separate component system to 2-way coaxials in minutes! You can choose between a pivoting or eyeball mount 1-inch silk dome tweeter as well. The outboard 12dB 2-way crossover network will make sure these speakers sound their best no matter how you decide to mount them. Our advanced
50/50 Wool cone is half wool and half paper to give you those warm vocal tones while still providing increased dynamics. A Butyl rubber surround is used to maximize performance while adding longevity to the speaker. Take your listening to new limits with the 2XL Component convertibles.
Pivot Point 1” Silk Dome Tweeter with mounting kit provides smooth audiophile treble reproduction
Convertible Tweeter Assembly for coaxial or component style mounting
50/50 Wool Blend Cone half paper, half wool delivers a more natural sound
Rigid Tooled Basket with Stainless Finish for precise motor alignment
3-ohm System Impedance for more efficient use of amplifier power
External 12dB 2-way Crossover Network for smooth transitions between woofer and tweeter
12
3XL / 2XL
tweeters
Offered in two distinct models, these high definition tweeters are capable of producing exceptionally smooth and crisp highs. PowerBass Xtreme tweeters use edge driven diaphragms with a large voice coil for high power handling and sensitivity. The 3XL-2S uses the finest hand treated silk available while the 2XL-1T incorporates an advanced anodized titanium dome.
Pivoting Tweeters With Composite Surround for outstanding imaging and high frequency reproduction
Computer Optimized Acoustic Crossover Network 12dB/octave audiophile crossover
Flush, Angle And Surface Mount Kit provides custom pinpoint imaging and installation versatility
Material Size
3XL-2S
2XL-1T
Pure Silk
Titanium
1.25"
1"
Power Handling
(RMS/Peak)
60 / 120 watts
50 / 100 watts
Nominal
Impedance
4-ohm
4-ohm
Frequency
Response
3k-20kHz
4.2k-25kHz
Sensitivity
(1W / 1M)
92 dB
91 dB
Mounting
Depth
1"
0.75"
3XL-2S 1.25" Pure Silk Dome Tweeter 2XL-1T 1" Titanium Dome Tweeter
4XL
Competition SPEAKERS
PowerBass is proud to introduce the latest engineering marvel to Competitors and Bass
Fanatics worldwide, the 4XL Competition Speakers.
Engineering prowess is what put PowerBass on the map in the competition arena, the 4XL woofer is no exception. We have integrated only the best parts available along with cutting edge design factors and mixed them with our engineering team’s vast experience to come out with the loudest woofer available only for serious Bass Engineers.
Our patented motor structure is the core of this beasts’ power along with one of the lightest and strongest cones on the market. The rest is classified information that we can not talk about.
The proof is in the bass, PowerBass.
4XL 15D
Custom Tooled Cast Aluminum Basket:
Computer aligned C-Beam design to support the high energy motor structure .
Proprietary Dual Layer Kevlar® Cone:
Kevlar is one of the lightest and strongest materials available that ensure not only strength, but speed under high stress situations.
Dual 2-ohm Voice Coils: Strapping Two of our
XA-4000 D Amplifiers together for each 2-ohm voice coil insures maximum voltage which equals maximum output.
4" Flat Wound CCAW Voice Coils: Large
Flat wound voice coils are the best way to achieve maximum SPL and power handling.
4 Layer High Roll Double Stitched Foam
Surround to handling the ultra high excursion.
Precision Twin Conex 10-inch Diameter
Spider s to ensure maximum linear cone travel.
1,088 Ounce Proprietary Motor Structure:
Big SPL means using an Xtremely large motor to push the limits.
Designed To Work Optimally In A Ported
Enclosure for maximum SPL output.
D E S I G N E D F O R
PORTED
ENCLOSURES
FOR MAXIMUM SPL OUTPUT
4XL-15D
4XL-4H
COMPRESSION HORN
TWEETER (4-OHM)
• 100 RMS/200 watts max.
• 108 dB SPL
• 20 oz. Ferrite Magnet
• 6dB Crossover Included
4XL-65-92
6.5” MID RANGE DRIVER (4-OHM)
• 100 RMS/200 watts max.
• 35 oz. Ferrite Magnet
• 2.0" KSV Voice Coil
• 92 dB
4XL-8o-94
8” MID BASS (4-OHM)
• 150 RMS/300 watts max.
• 35 oz. Ferrite Magnet
• 2.0" KSV Voice Coil
• 94 dB
13
Accessories
Processors
XEQ-5XO
4 BAND PARAMETRIC EQUALIZER / PRE-AMP
• Switchable Main/aux Input
• Front/rear/sub Output
• Variable Input Gains
• Variable Subwoofer Crossover
• Subwoofer Volume Control
• Master Volume Control
• Variable Fader Control
• 10 Volt Output
Capacitors
XCP-12, XCP-6
12 FARAD AND 6 FARAD HYBRID
DIGITAL CAPACITORS
• Electrolytic & Carbon Based Technology
• Blue LED Voltage & Amperage Meters
• Powerline Blue LED Indicators
• Extruded Aluminum Case
• Platinum 1/0 Gauge Terminal Blocks
XBA-2
BASS ACCELERATOR
• Parametric Bass Restorer
• Variable Phase Control
• Variable Frequency Control
• Variable "Q" Control
• Visual LED Level Indicators
• Frequency Response: 10Hz thru 100Hz
• Remote with Gain and Subsonic Controls
XCP-1.2
1.2 FARAD DIGITAL CAPACITOR
• Blue LED Voltage/Amperage Meter
• Polycarbonate Display Cover
• Auto Turn On
• Platinum Power Connectors
• Voltage Monitoring Alarm
• 24 VDC
• Attractive Blister Card
Wiring Kits
XTK-48D
DUAL AMPLIFIER WIRING KIT w/
DIGITAL DISTRIBUTION BLOCK
• 16' High Quality Twisted Pair RCA Cables
• 4 GA 16' OFC Power and 3' OFC Ground Wire
• 8 GA 6' OFC Power and 6' OFC Ground Wire
• 40' OFC 16 GA Speaker Wire
• Mini ANL Fuse Block with Blue LED
Voltage/Amperage Meter
• Platinum Connectors
• Attractive Blister Card
14
XTK-4, XTK-8
4 GAUGE AND 8 GAUGE DELUXE
AMPLIFIER WIRING KITS
• 16' High Quality Twisted Pair
RCA Cables
• 16' OFC Power and 3' Ground Wire
• 30' OFC 16 GA Speaker Wire
• Deluxe Waterproof Fuse Holder
• Assorted Platinum Connectors
• Attractive Blister Card
PowerBass Xtreme Team Rider, Ricky Gonzalez
PowerBass
Marine Audio
1o” Marine Woofer
• Marine Grade Woofer with Injection Molded
UV-Treated
White Polypropylene Cone
• Polyurethane Rubber Woofer Surround
• Insulated Tinsel Leads
• Marine Grade Spider
• 120 oz. Motor Structure
• 2.0” KSV Voice Coil
• 250 Watts RMS/500 Peak
• Frequency Response 31 – 500 Hz.
• Single 4-Ohm Impedance
• Gold Plated Input Terminals
WOOFER
TWEETER
NOMINAL
IMPEDANCE
FREQUENCY
RESPONSE:
SENSITIVITY
1W / 1M
POWER
RMS / PEAK
HOUSING
MOUNTING
DEPTH
XL-522M
5.25" Poly
1.0" Mylar
4-ohm
70Hz-20kHz
91 dB
60/120 watts
UV Plastic
2.33”
XL-652M
6.5" Poly
1.0" Mylar
4-ohm
67Hz-20kHz
92 dB
80/160 watts
UV Plastic
2.8”
XL-692M
6x9" Poly
1.0" Mylar
4-ohm
56Hz-20kHz
94 dB
120/240 watts
UV Plastic
3.5”
Marine Coaxials
UV-Treated White Polypropylene Cones
• UV-Resistant Hi-Impact Integrated White Grills
• Gold Plated Input Terminals
• Moisture Protective Sealed Magnet Covers
• Stainless Steel Mounting Hardware
• Insulated Tinsel Leads
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Custom steel basket with stainless steel top plate for durability
- High-quality paper cone with aluminum dust cap for rigidity
- 2.5" high-temperature aluminum voice coil for power handling
- Dual 4-ohm voice coils for wiring flexibility
- Extended pole piece for increased magnetic field strength
- Vented back plate for heat dissipation
- Gold-plated spring terminals for secure connections
Related manuals
Frequently Answers and Questions
What type of enclosure is recommended for the PowerBass Xtreme XL subwoofer?
What is the power handling capacity of the PowerBass Xtreme XL subwoofer?
What is the voice coil size of the PowerBass Xtreme XL subwoofer?
advertisement