Powermatic 520B User's Manual

®

FEATURES

Digital readout allows the user to see the exact RPM that the spindle is turning at for more accurate adjustments and fine tuning

Redesigned headstock allows for better chisel angles when turning the back side of a bowl against the headstock

Redesigned tool rest geometry allows for better chisel movement along the tool rest

Brass tipped knockout bar concentrates the action in the sliding handle; the brass tip will not mar or damage any of the drive centers

Tool caddy mounts directly to the lathe which allows the user to store all the necessary tools right under the headstock

Tailstock storage keeps a chip free area to store other often used accessories

Model

Stock Number

Distance Between Centers (in.)

Swing Over Bed (in.)

Overall Length (in.)

Spindle Speeds

Motor

Lathe Power Requirements

Spindle Thread Size

Head/Tailstock Taper

Height

Weight

Tailstock Quill Travel (in.)

3” Faceplate

14” Toolrest

Drive System

Spindle Lock

Knock Out Rod, Brass Tipped

Drive Center

Multiple Ball Bearing Line Center

Hole through Tail Stock Spindle (in.)

Hole through Head Stock Spindle (in.)

Footprint of stand (in.)

20

50

3520B

1352001

34-1/2

0-1200 / 0-3200 RPM

2HP, 220V

220V, 3PH or 1PH

1-1/4” x 8 T.P.I.

#2 Morse

44” (Adjustable)

650 lbs

Over 4 standard standard

Poly V Belt, Inverter Drive standard standard standard standard

3/8

5/8

50L x 24W

®