PVI Industries 199 SS A-PN User's Manual

PLATINUM

®

• CONDENSING GAS WATER HEATER

STAINLESS STEEL TANK

TANK SERIES 70 GALLONS

MODEL NUMBER X

Input Btu/h

GPH Recovery Rate at 40°F to 140°F

Storage Capacity - gallons

1st Hour Delivery (100°F ΔT) - gallons

Hot Outlet and Cold Inlet - NPT

Flue Connection Diameter - inches

Approximate Shipping Weight - lbs

199 SS A-PN 299 SS A-PN 399 SS A-PN

199,000 299,000 399,000

221 340 444

80 70 70

289 397 501

2

3 *

1000

2

4

1100

2

4

1100

Dimensions are in inches unless otherwise noted.

For standard and optional equipment, see form # PV 6811.

* When connected with field provided 3” x 4” adapter of the same material as required for venting (see I&M).

STANDARD GAS PRESSURE REQUIREMENTS

MINIMUM FLOW GAS PRESSURE: 4.5" W.C.

MAXIMUM STATIC GAS PRESSURE: 10.5" W.C.

FOR GAS PRESSURES OUTSIDE OF THIS RANGE,

CONTACT YOUR PVI REPRESENTATIVE.

STANDARD ELECTRICAL REQUIREMENTS

120V, 1Ø, 60 HZ.

MAXIMUM AMP DRAW (TRIAL FOR IGNITION): 6

CONTINUOUS AMP DRAW WHEN FIRING: 1.3

CONTINUOUS AMP DRAW DURING STANDBY: 0.03

This product is protected by patents in the U.S., Canada and Mexico.

PV 6812 09/08

VENTING REQUIREMENTS

CATEGORY IV - POSITIVE PRESSURE, CONDENSING.

UL CLASSIFIED FOR SCHEDULE 40, SOLID-WALL PVC OR CPVC PIPE.

“SANI” TEMPERATURE HEATER REQUIRES CPVC VENT PIPE

SEE INSTALLATION MANUAL FOR VENTING

AND DIRECT COMBUSTION AIR GUIDELINES.

PVI RESERVES THE RIGHT TO CHANGE THE DESIGN

AND SPECIFICATION WITHOUT NOTICE.

PVI INDUSTRIES, LLC

FORT WORTH, TEXAS 76111

(800) 784-8326 y www.pvi.com