Osynce screeneye x Owner Manual

be in motion

screeneye x

Quick start guide

English

1. ACTIVATE SCREENEYE X

To get the screeneye x visor from sleep mode, press the middle button and hold it for 5 seconds.

The current time appears.

2. BASIC SETTINGS/PAIRING

If the screeneye x is activated and the current time is displayed, select “SETTING” by pressing

3 times the front button. Press the middle button to open “SETTING”. Set date and time in the menu “TIME”. Adjust each value by pressing front or rear button, confirm with the middle button.

To pair optional sensors, select “SETTING” (see above) and press the middle button, then go to

“PAIR” with front or rear button and select with middle button. When “YES” is blinking, be sure, that your sensors are activated, then confirm by pressing the middle button again. When pairing is done, “PAIRED” appears in the display.

3. SPORT - MODE

Press front or rear button and choose “SPORT”.

Open the menu “SPORT” by pressing the middle button. The display is divided into 2 parts which can display different values. Switch between by pressing the front or rear button.

Hold the middle button to start the stop watch.

Hold the rear button to start the coach mode.

4. OVERVIEW DISPLAY

Stop watch

Cadence (optional)

Current time

Heart rate in % of maximum heart rate (optional)

Distance in km or miles

(optional)

Current heart rate (optional)

Temperature

Lap time

Speed / Pace (optional)

Below high zone setting

Above low zone setting

5. KEYS

Rear Button

Short key stroke

Menu

Move backward in menu

SPORT mode

Scroll through the values on the right side

Setting mode

Decrease value

Long key stroke

Menu

No function

SPORT mode

Switch to coach mode

Setting mode

Decrease value rapidly

Middle button

Short key stroke

Menu

Select/confirm current menu item

SPORT mode

Begins a new lap when stop watch is running.

Setting mode

Select and confirm

Long key stroke

Menu

No function

SPORT mode

Start and stop the stop watch

Setting mode

No function

6. OPTIONAL ACCESSORIES

The screeneye x visor is ready to use with the

heart2feel x heart rate belt and the maxrun foot pod sensor. For more information about optional accessories, go to www.o-synce.com. You can also contact your o-synce dealer to purchase accessories.

7. DATATRANSFER

All in the stop watch mode recorded data can be transferred with the included USB cable.

The detailed user settings such as gender, age, weight, heart rate limits, etc. can be set. Use the

traininglab software from our website: www.o-synce.com/tLab

Front button

Short key stroke

Menu

Move forward in menu

SPORT mode

Scroll through the values on the left side

Setting mode

Increase value

Long key stroke

Menu

Switch to a higher menu level

SPORT mode

Switch to a higher menu level

Setting mode

Increase value rapidly

8. MORE INFO

Visit our website for a detailed manual and further information. www.o-synce.com

9. KEYFLOW

Sleep mode

Nothing is displayed, press the middle button for 5 seconds to show up the current time

1st menu level

Time

Sport

Data

Setting

Sport

Stop watch

Coach mode

Data

Totals

Sessions

Clear

Setting

Time

Unit

Pair

View

10. CONTACT

Help us better support you by sending us your comments or questions by using our email contact on our website www.o-synce.com.

Keep the original sales receipt, or a photocopy, in a safe place.

o-synce Europe GmbH

Thaddenstr. 14a

69469 Weinheim

Germany

Customer support

For product related questions

Phone +49-6201 980 50-0

Fax +49-6201 980 50-11 [email protected]