PC7501 Setup Guide
1 Check the contents.
2 Register your PC7501.
3 Install an emulator debugger.
Download the latest emulator debugger from http://www.renesas.com/en/tools
4 Setup hardware.
5 Turn on the PC7501 in maintenance mode.
6 Start up the emulator debugger.
7 Make settings for the emulator debugger.
8 Download firmware.
9 Exit the emulator debugger, and turn off the PC7501.
10 Execute the self-check.
11 Start up the emulator debugger.
For Troubleshooting...
For details, refer to...
>> PC7501 Packing List (Back)
>> PC7501 User Registration Tool (Start up the REG7501E.EXE in the \REGISTER\ENGLISH folder on the Renesas Debugger
Package CD-ROM) or send a hardware tool user registration FAX sheet
>> README.HTM on the Renesas Debugger Package CD-ROM
>> PC7501 User’s Manual “Chapter 4 Setup (P.23)” and the user’s manual of the emulation probe
For Troubleshooting... PC7501 User’s Manual “5.2 Interface Connection Error (P.37)”
>> PC7501 User’s Manual “4.4 Downloading Firmware (P.34)”
>> Emulator Debugger User’s Manual (Online Help)
>> Emulator Debugger User’s Manual (Online Help)
>> PC7501 User’s Manual “4.4 Downloading Firmware (P.34)” and Emulator Debugger User’s Manual (Online Help)
For Troubleshooting... PC7501 User’s Manual “5.3 Firmware Download Error (P.39)”
>> User’s Manual of each emulation probe
>> Emulator Debugger User’s Manual (Online Help)
PC7501 >> PC7501 User’s Manual “Chapter 5 Troubleshooting (P.37)”
Emulator debugger >> Emulator Debugger User’s Manual (Online Help)
Renesas Tool Homepage PC7501 Emulators Site >> http://www.renesas.com/eng/products/mpumcu/toolhp/pc7501/
© 2005. Renesas Technology Corp. and Renesas Solutions Corp., All rights reserved. Printed in Japan. Rev.1.00
05.03.01
REJ10J0902-0100T
PC7501 Packing List
- PC7501 emulator main unit
- AC adaptor (100-240 V, 50/60 Hz)
- AC power cable (3m)
- USB interface cable (1.9m)
- LPT parallel interface cable (1.9m, IEEE1284-A male to IEEE1284-C male cable)
- External trigger input/event output cable (50 cm)
- 160-pin flexible cable for connecting emulation probe (Preinstalled to PC7501)
- Converter board for connecting emulation probe M3T-FLX160-EPB (Preinstalled to PC7501)
- Oscillator board OSC-3 for 30 MHz (Preinstalled to PC7501)
- Renesas Debugger Package CD-ROM
- PC7501 User’s Manual (English)
- PC7501 User’s Manual (Japanese)
- Hardware tool user registration FAX sheet
This product package does not contain a LAN cable. Get a commercially available 10BASE-T cable.
If any of these items are missing or found faulty, please contact your local distributor.
1
1
1
1
1
1
1
1
1
1
1
1
1
